Setting this object to a value is a request for a
particular IV zoneset to be activated on this device.
i.e., for the current configuration of that zoneset
to be cloned with the clone becoming the
active zoneset.
Setting this object to a value (say, N) identifies
the IV zoneset to be cloned as the zoneset
identified by civrZoneSetIndex object having the same
value N.
Even though there could be multiple IV zonesets on
this device, only one can be active at a time. If a
IV zoneset is already active and a second IV zone
set is activated, then the first IV zoneset is
automatically deactivated and the second IV zoneset
is activated.
The IV zoneset activation is done only in
'activate VSANs' on the local device. The
'activate VSANs' is the intersection of topology VSANs
on the local device (civrTopologyActiveSwitchVsan2k and
civrTopologyActiveSwitchVsan4k), members VSANs (union
of all the VSANs of the members in the zoneset being
activated) and local VSANs (vsanTable from
CISCO-VSAN-MIB).
If the activation was successful then,
civrZoneEnforcedZoneSetName contains the name of
zoneset corresponding to the civrZoneSetIndex that was
set.
The value of this object when read is always 0.
Parsed from file CISCO-IVR-MIB.mib
Module: CISCO-IVR-MIB
Setting this object to a value is a request for a
particular IV zoneset to be activated on this device.
i.e., for the current configuration of that zoneset
to be cloned with the clone becoming the
active zoneset.
Setting this object to a value (say, N) identifies
the IV zoneset to be cloned as the zoneset
identified by civrZoneSetIndex object having the same
value N.
Even though there could be multiple IV zonesets on
this device, only one can be active at a time. If a
IV zoneset is already active and a second IV zone
set is activated, then the first IV zoneset is
automatically deactivated and the second IV zoneset
is activated.
The IV zoneset activation is done only in
'activate VSANs' on the local device. The
'activate VSANs' is the intersection of topology VSANs
on the local device (civrTopologyActiveSwitchVsan2k and
civrTopologyActiveSwitchVsan4k), members VSANs (union
of all the VSANs of the members in the zoneset being
activated) and local VSANs (vsanTable from
CISCO-VSAN-MIB).
If the activation was successful then,
civrZoneEnforcedZoneSetName contains the name of
zoneset corresponding to the civrZoneSetIndex that was
set.
The value of this object when read is always 0.
Setting this object to a value is a request for a
particular IV zoneset to be activated on this device.
i.e., for the current configuration of that zoneset
to be cloned with the clone becoming the
active zoneset.
Setting this object to a value (say, N) identifies
the IV zoneset to be cloned as the zoneset
identified by civrZoneSetIndex object having the same
value N.
Even though there could be multiple IV zonesets on
this device, only one can be active at a time. If a
IV zoneset is already active and a second IV zone
set is activated, then the first IV zoneset is
automatically deactivated and the second IV zoneset
is activated.
The IV zoneset activation is done only in
'activate VSANs' on the local device. The
'activate VSANs' is the intersection of topology VSANs
on the local device (civrTopologyActiveSwitchVsan2k and
civrTopologyActiveSwitchVsan4k), members VSANs (union
of all the VSANs of the members in the zoneset being
activated) and local VSANs (vsanTable from
CISCO-VSAN-MIB).
If the activation was successful then,
civrZoneEnforcedZoneSetName contains the name of
zoneset corresponding to the civrZoneSetIndex that was
set.
The value of this object when read is always 0.
Parsed from file CISCO-IVR-MIB.my.txt
Company: None
Module: CISCO-IVR-MIB
Setting this object to a value is a request for a
particular IV zoneset to be activated on this device.
i.e., for the current configuration of that zoneset
to be cloned with the clone becoming the
active zoneset.
Setting this object to a value (say, N) identifies
the IV zoneset to be cloned as the zoneset
identified by civrZoneSetIndex object having the same
value N.
Even though there could be multiple IV zonesets on
this device, only one can be active at a time. If a
IV zoneset is already active and a second IV zone
set is activated, then the first IV zoneset is
automatically deactivated and the second IV zoneset
is activated.
The IV zoneset activation is done only in
'activate VSANs' on the local device. The
'activate VSANs' is the intersection of topology VSANs
on the local device (civrTopologyActiveSwitchVsan2k and
civrTopologyActiveSwitchVsan4k), members VSANs (union
of all the VSANs of the members in the zoneset being
activated) and local VSANs (vsanTable from
CISCO-VSAN-MIB).
If the activation was successful then,
civrZoneEnforcedZoneSetName contains the name of
zoneset corresponding to the civrZoneSetIndex that was
set.
The value of this object when read is always 0.
civrZoneSetActivate OBJECT-TYPE SYNTAX Unsigned32 (0..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to a value is a request for a particular IV zoneset to be activated on this device. i.e., for the current configuration of that zoneset to be cloned with the clone becoming the active zoneset. Setting this object to a value (say, N) identifies the IV zoneset to be cloned as the zoneset identified by civrZoneSetIndex object having the same value N. Even though there could be multiple IV zonesets on this device, only one can be active at a time. If a IV zoneset is already active and a second IV zone set is activated, then the first IV zoneset is automatically deactivated and the second IV zoneset is activated. The IV zoneset activation is done only in 'activate VSANs' on the local device. The 'activate VSANs' is the intersection of topology VSANs on the local device (civrTopologyActiveSwitchVsan2k and civrTopologyActiveSwitchVsan4k), members VSANs (union of all the VSANs of the members in the zoneset being activated) and local VSANs (vsanTable from CISCO-VSAN-MIB). If the activation was successful then, civrZoneEnforcedZoneSetName contains the name of zoneset corresponding to the civrZoneSetIndex that was set. The value of this object when read is always 0." ::= { cimIvrZoneset 3 }
civrZoneSetActivate OBJECT-TYPE SYNTAX Gauge(0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to a value is a request for a particular IV zoneset to be activated on this device. i.e., for the current configuration of that zoneset to be cloned with the clone becoming the active zoneset. Setting this object to a value (say, N) identifies the IV zoneset to be cloned as the zoneset identified by civrZoneSetIndex object having the same value N. Even though there could be multiple IV zonesets on this device, only one can be active at a time. If a IV zoneset is already active and a second IV zone set is activated, then the first IV zoneset is automatically deactivated and the second IV zoneset is activated. The IV zoneset activation is done only in 'activate VSANs' on the local device. The 'activate VSANs' is the intersection of topology VSANs on the local device (civrTopologyActiveSwitchVsan2k and civrTopologyActiveSwitchVsan4k), members VSANs (union of all the VSANs of the members in the zoneset being activated) and local VSANs (vsanTable from CISCO-VSAN-MIB). If the activation was successful then, civrZoneEnforcedZoneSetName contains the name of zoneset corresponding to the civrZoneSetIndex that was set. The value of this object when read is always 0." ::= { cimIvrZoneset 3 }
Vendor: Cisco
Module: CISCO-IVR-MIB
[Automatically extracted from oidview.com]
civrZoneSetActivate OBJECT-TYPE SYNTAX Unsigned32 (0..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to a value is a request for a particular IV zoneset to be activated on this device. i.e., for the current configuration of that zoneset to be cloned with the clone becoming the active zoneset. Setting this object to a value (say, N) identifies the IV zoneset to be cloned as the zoneset identified by civrZoneSetIndex object having the same value N. Even though there could be multiple IV zonesets on this device, only one can be active at a time. If a IV zoneset is already active and a second IV zone set is activated, then the first IV zoneset is automatically deactivated and the second IV zoneset is activated. The IV zoneset activation is done only in 'activate VSANs' on the local device. The 'activate VSANs' is the intersection of topology VSANs on the local device (civrTopologyActiveSwitchVsan2k and civrTopologyActiveSwitchVsan4k), members VSANs (union of all the VSANs of the members in the zoneset being activated) and local VSANs (vsanTable from CISCO-VSAN-MIB). If the activation was successful then, civrZoneEnforcedZoneSetName contains the name of zoneset corresponding to the civrZoneSetIndex that was set. The value of this object when read is always 0." ::= { cimIvrZoneset 3 }
civrZoneSetActivate OBJECT-TYPE SYNTAX Unsigned32 (0..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to a value is a request for a particular IV zoneset to be activated on this device. i.e., for the current configuration of that zoneset to be cloned with the clone becoming the active zoneset. Setting this object to a value (say, N) identifies the IV zoneset to be cloned as the zoneset identified by civrZoneSetIndex object having the same value N. Even though there could be multiple IV zonesets on this device, only one can be active at a time. If a IV zoneset is already active and a second IV zone set is activated, then the first IV zoneset is automatically deactivated and the second IV zoneset is activated. The IV zoneset activation is done only in 'activate VSANs' on the local device. The 'activate VSANs' is the intersection of topology VSANs on the local device (civrTopologyActiveSwitchVsan2k and civrTopologyActiveSwitchVsan4k), members VSANs (union of all the VSANs of the members in the zoneset being activated) and local VSANs (vsanTable from CISCO-VSAN-MIB). If the activation was successful then, civrZoneEnforcedZoneSetName contains the name of zoneset corresponding to the civrZoneSetIndex that was set. The value of this object when read is always 0." ::= { cimIvrZoneset 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.371.1.1.2.3.0 | civrZoneSetActivate | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.371.1.1.2.1 | civrZoneSetNumber | 1 | 1 | The number of entries currently present in the civrZoneSetTable. |
1.3.6.1.4.1.9.9.371.1.1.2.2 | civrZoneSetTable | 1 | 7 | A table containing information on each Inter-VSAN (IV) zonesets which are configured locally. It comprises the zonesets in the fu… |
1.3.6.1.4.1.9.9.371.1.1.2.4 | civrZoneSetActvatDeactvatResult | 1 | 1 | This object indicates the outcome of the most recent activation/deactivation. activateSuccess - activation succes… |
1.3.6.1.4.1.9.9.371.1.1.2.5 | civrZoneSetDeActivate | 1 | 1 | Setting this object to 'deactivate' is a request to deactivate the currently active IV zoneset. deactivate - deactivate IV zones… |
1.3.6.1.4.1.9.9.371.1.1.2.6 | civrZonesetDbChecksum | 1 | 1 | The checksum of the full IV zone database. |
1.3.6.1.4.1.9.9.371.1.1.2.7 | civrActiveZonesetChecksum | 1 | 1 | The checksum of the enforced (active) IV zoneset. |
1.3.6.1.4.1.9.9.371.1.1.2.8 | civrZoneEnforcedZoneSetName | 1 | 1 | The name of the enforced IV zoneset. |
1.3.6.1.4.1.9.9.371.1.1.2.9 | civrZoneEnforcedZoneSetZoneList | 1 | 1 | The set of IV zones which form this IV zoneset. This object was copied from the civrZoneSetZoneList object in the civrZoneSetTabl… |
1.3.6.1.4.1.9.9.371.1.1.2.10 | civrZoneEnforcedZoneSetActvtTime | 1 | 1 | The sysUpTime at which enforced zoneset was most recently activated. If this entry has been activated prior to the last re-initial… |
1.3.6.1.4.1.9.9.371.1.1.2.11 | civrZoneCopyZoneSetEnforcdToFull | 1 | 1 | This object copies the enforced IV zoneset (active IV zoneset) into the full IV zone database Setting this object to 'copy' will … |
1.3.6.1.4.1.9.9.371.1.1.2.12 | civrZoneClearFullZoneDb | 1 | 1 | This object clears the full IVR zone database. Setting this object to 'clear' will clear the full IV zone database. No action is t… |
1.3.6.1.4.1.9.9.371.1.1.2.13 | civrZonesetActivateForce | 1 | 1 | The force option for IV zoneset activation. Following things are done if this object is 'true': - If there is no regular active z… |
1.3.6.1.4.1.9.9.371.1.1.2.14 | civrZoneSetTableNextIndex | 1 | 1 | This object specifies the next available index for object civrZoneSetIndex which can be used for creating an entry in civrZoneSet… |