The MIB module contains ATM Trunk statistics.
TERMINOLOGY
PVC: Permanent Virtual Circuit
OAM: Operation and Management
CRC: Cyclic redundancy check
AIS: Alarm Indication Signal
TDM: Time Division Multiplex
FERF: Far End Receive Failure
CPS: Common Part Sub-layer
PDU: Protocol Data Unit
HEC: Header Error Control
DSP: Digital Signal Processing
CID: Channel Identifier
UUI: User-to-User Information
VoIP: Voice over IP
CCS: Common Channel Signaling
VoAAL2: Voice over AAL2
SDU: Service Data Unit
HDLC: High Level Data Link Control
SAR: Segmantation and Reassembly
External AIS - is an Alarm Indication Signal associated
with a maintenance alarm detected on a defective
maintenance span, that is transmitted in the direction
of the defect as a substitute for normal signal.
The purpose is to show the downstream entities that
a defect has been identified and to prevent other
maintenance alarms consequent to this first defect.
External AIS bit stream is represented by an all 1's
signal.
Ref - ITU-T Rec. M.20 sec. 5.4.2 a
External RAI - is a Remote Alarm Indication signal
that is transmitted upstream from an entity that has
detected defects persisting long enough to constitute
a received signal failure. Its purpose is to report in
the backward direction that there is an interruption
of service in the forward direction.
The forward direction is from the originating end of
the alarm to the remote end.
The backward direction is from the remote end to the
orginating end of the alarm.
Ref - ITU-T Rec. G.704 section 2.1.3.1.3
I.366.2 - ANNEX N
External Connection AIS - is a Alarm Indicating Signal
transmitted in the downstream direction from the AAL
type 2 connecting point that first detects a defect
affecting the AAL type 2 connection; this includes
defects indicated by lower layers.
Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1
External Connection RDI - is a signal transmitted upstream
by an AAl type 2 endpoint that is in an alarm state as the
result of having received an AAL type2 connection AIS or
having detected a defect that affects the AAL type2
connection.
All ATM alarm definitions are specified in I.610
(ITU standard).
Parsed from file CISCO-ATM-TRUNK-STAT-MIB.mib
Module: CISCO-ATM-TRUNK-STAT-MIB
The MIB module contains ATM Trunk statistics.
TERMINOLOGY
PVC: Permanent Virtual Circuit
OAM: Operation and Management
CRC: Cyclic redundancy check
AIS: Alarm Indication Signal
TDM: Time Division Multiplex
FERF: Far End Receive Failure
CPS: Common Part Sub-layer
PDU: Protocol Data Unit
HEC: Header Error Control
DSP: Digital Signal Processing
CID: Channel Identifier
UUI: User-to-User Information
VoIP: Voice over IP
CCS: Common Channel Signaling
VoAAL2: Voice over AAL2
SDU: Service Data Unit
HDLC: High Level Data Link Control
SAR: Segmantation and Reassembly
External AIS - is an Alarm Indication Signal associated
with a maintenance alarm detected on a defective
maintenance span, that is transmitted in the direction
of the defect as a substitute for normal signal.
The purpose is to show the downstream entities that
a defect has been identified and to prevent other
maintenance alarms consequent to this first defect.
External AIS bit stream is represented by an all 1's
signal.
Ref - ITU-T Rec. M.20 sec. 5.4.2 a
External RAI - is a Remote Alarm Indication signal
that is transmitted upstream from an entity that has
detected defects persisting long enough to constitute
a received signal failure. Its purpose is to report in
the backward direction that there is an interruption
of service in the forward direction.
The forward direction is from the originating end of
the alarm to the remote end.
The backward direction is from the remote end to the
orginating end of the alarm.
Ref - ITU-T Rec. G.704 section 2.1.3.1.3
I.366.2 - ANNEX N
External Connection AIS - is a Alarm Indicating Signal
transmitted in the downstream direction from the AAL
type 2 connecting point that first detects a defect
affecting the AAL type 2 connection; this includes
defects indicated by lower layers.
Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1
External Connection RDI - is a signal transmitted upstream
by an AAl type 2 endpoint that is in an alarm state as the
result of having received an AAL type2 connection AIS or
having detected a defect that affects the AAL type2
connection.
All ATM alarm definitions are specified in I.610
(ITU standard).
Parsed from file CISCO-ATM-TRUNK-STAT-MIB.my.txt
Company: None
Module: CISCO-ATM-TRUNK-STAT-MIB
The MIB module contains ATM Trunk statistics.
TERMINOLOGY
PVC: Permanent Virtual Circuit
OAM: Operation and Management
CRC: Cyclic redundancy check
AIS: Alarm Indication Signal
TDM: Time Division Multiplex
FERF: Far End Receive Failure
CPS: Common Part Sub-layer
PDU: Protocol Data Unit
HEC: Header Error Control
DSP: Digital Signal Processing
CID: Channel Identifier
UUI: User-to-User Information
VoIP: Voice over IP
CCS: Common Channel Signaling
VoAAL2: Voice over AAL2
SDU: Service Data Unit
HDLC: High Level Data Link Control
SAR: Segmantation and Reassembly
External AIS - is an Alarm Indication Signal associated
with a maintenance alarm detected on a defective
maintenance span, that is transmitted in the direction
of the defect as a substitute for normal signal.
The purpose is to show the downstream entities that
a defect has been identified and to prevent other
maintenance alarms consequent to this first defect.
External AIS bit stream is represented by an all 1's
signal.
Ref - ITU-T Rec. M.20 sec. 5.4.2 a
External RAI - is a Remote Alarm Indication signal
that is transmitted upstream from an entity that has
detected defects persisting long enough to constitute
a received signal failure. Its purpose is to report in
the backward direction that there is an interruption
of service in the forward direction.
The forward direction is from the originating end of
the alarm to the remote end.
The backward direction is from the remote end to the
orginating end of the alarm.
Ref - ITU-T Rec. G.704 section 2.1.3.1.3
I.366.2 - ANNEX N
External Connection AIS - is a Alarm Indicating Signal
transmitted in the downstream direction from the AAL
type 2 connecting point that first detects a defect
affecting the AAL type 2 connection; this includes
defects indicated by lower layers.
Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1
External Connection RDI - is a signal transmitted upstream
by an AAl type 2 endpoint that is in an alarm state as the
result of having received an AAL type2 connection AIS or
having detected a defect that affects the AAL type2
connection.
All ATM alarm definitions are specified in I.610
(ITU standard).
ciscoAtmTrunkStatMIB MODULE-IDENTITY LAST-UPDATED "200508100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module contains ATM Trunk statistics. TERMINOLOGY PVC: Permanent Virtual Circuit OAM: Operation and Management CRC: Cyclic redundancy check AIS: Alarm Indication Signal TDM: Time Division Multiplex FERF: Far End Receive Failure CPS: Common Part Sub-layer PDU: Protocol Data Unit HEC: Header Error Control DSP: Digital Signal Processing CID: Channel Identifier UUI: User-to-User Information VoIP: Voice over IP CCS: Common Channel Signaling VoAAL2: Voice over AAL2 SDU: Service Data Unit HDLC: High Level Data Link Control SAR: Segmantation and Reassembly External AIS - is an Alarm Indication Signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect. External AIS bit stream is represented by an all 1's signal. Ref - ITU-T Rec. M.20 sec. 5.4.2 a External RAI - is a Remote Alarm Indication signal that is transmitted upstream from an entity that has detected defects persisting long enough to constitute a received signal failure. Its purpose is to report in the backward direction that there is an interruption of service in the forward direction. The forward direction is from the originating end of the alarm to the remote end. The backward direction is from the remote end to the orginating end of the alarm. Ref - ITU-T Rec. G.704 section 2.1.3.1.3 I.366.2 - ANNEX N External Connection AIS - is a Alarm Indicating Signal transmitted in the downstream direction from the AAL type 2 connecting point that first detects a defect affecting the AAL type 2 connection; this includes defects indicated by lower layers. Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1 External Connection RDI - is a signal transmitted upstream by an AAl type 2 endpoint that is in an alarm state as the result of having received an AAL type2 connection AIS or having detected a defect that affects the AAL type2 connection. All ATM alarm definitions are specified in I.610 (ITU standard). " REVISION "200508100000Z" DESCRIPTION "Add new objects - catsPvcOamLpbkTimeoutCnts - catsPvcNewOamLpbkTimeoutDur - catsPvcActiveOamLpbkTimeoutDur - catsPvcOamLpbkTimeoutThreshold" REVISION "200405120000Z" DESCRIPTION "Initial version of the MIB." ::= { ciscoMgmt 407 }
ciscoAtmTrunkStatMIB OBJECT IDENTIFIER ::= { ciscoMgmt 407 }
Vendor: Cisco
Module: CISCO-ATM-TRUNK-STAT-MIB
[Automatically extracted from oidview.com]
ciscoAtmTrunkStatMIB MODULE-IDENTITY LAST-UPDATED "200508100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module contains ATM Trunk statistics. TERMINOLOGY PVC: Permanent Virtual Circuit OAM: Operation and Management CRC: Cyclic redundancy check AIS: Alarm Indication Signal TDM: Time Division Multiplex FERF: Far End Receive Failure CPS: Common Part Sub-layer PDU: Protocol Data Unit HEC: Header Error Control DSP: Digital Signal Processing CID: Channel Identifier UUI: User-to-User Information VoIP: Voice over IP CCS: Common Channel Signaling VoAAL2: Voice over AAL2 SDU: Service Data Unit HDLC: High Level Data Link Control SAR: Segmantation and Reassembly External AIS - is an Alarm Indication Signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect. External AIS bit stream is represented by an all 1's signal. Ref - ITU-T Rec. M.20 sec. 5.4.2 a External RAI - is a Remote Alarm Indication signal that is transmitted upstream from an entity that has detected defects persisting long enough to constitute a received signal failure. Its purpose is to report in the backward direction that there is an interruption of service in the forward direction. The forward direction is from the originating end of the alarm to the remote end. The backward direction is from the remote end to the orginating end of the alarm. Ref - ITU-T Rec. G.704 section 2.1.3.1.3 I.366.2 - ANNEX N External Connection AIS - is a Alarm Indicating Signal transmitted in the downstream direction from the AAL type 2 connecting point that first detects a defect affecting the AAL type 2 connection; this includes defects indicated by lower layers. Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1 External Connection RDI - is a signal transmitted upstream by an AAl type 2 endpoint that is in an alarm state as the result of having received an AAL type2 connection AIS or having detected a defect that affects the AAL type2 connection. All ATM alarm definitions are specified in I.610 (ITU standard). " REVISION "200508100000Z" DESCRIPTION "Add new objects - catsPvcOamLpbkTimeoutCnts - catsPvcNewOamLpbkTimeoutDur - catsPvcActiveOamLpbkTimeoutDur - catsPvcOamLpbkTimeoutThreshold" REVISION "200405120000Z" DESCRIPTION "Initial version of the MIB." ::= { ciscoMgmt 407 }
ciscoAtmTrunkStatMIB MODULE-IDENTITY LAST-UPDATED "200508100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module contains ATM Trunk statistics. TERMINOLOGY PVC: Permanent Virtual Circuit OAM: Operation and Management CRC: Cyclic redundancy check AIS: Alarm Indication Signal TDM: Time Division Multiplex FERF: Far End Receive Failure CPS: Common Part Sub-layer PDU: Protocol Data Unit HEC: Header Error Control DSP: Digital Signal Processing CID: Channel Identifier UUI: User-to-User Information VoIP: Voice over IP CCS: Common Channel Signaling VoAAL2: Voice over AAL2 SDU: Service Data Unit HDLC: High Level Data Link Control SAR: Segmantation and Reassembly External AIS - is an Alarm Indication Signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect. External AIS bit stream is represented by an all 1's signal. Ref - ITU-T Rec. M.20 sec. 5.4.2 a External RAI - is a Remote Alarm Indication signal that is transmitted upstream from an entity that has detected defects persisting long enough to constitute a received signal failure. Its purpose is to report in the backward direction that there is an interruption of service in the forward direction. The forward direction is from the originating end of the alarm to the remote end. The backward direction is from the remote end to the orginating end of the alarm. Ref - ITU-T Rec. G.704 section 2.1.3.1.3 I.366.2 - ANNEX N External Connection AIS - is a Alarm Indicating Signal transmitted in the downstream direction from the AAL type 2 connecting point that first detects a defect affecting the AAL type 2 connection; this includes defects indicated by lower layers. Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1 External Connection RDI - is a signal transmitted upstream by an AAl type 2 endpoint that is in an alarm state as the result of having received an AAL type2 connection AIS or having detected a defect that affects the AAL type2 connection. All ATM alarm definitions are specified in I.610 (ITU standard). " REVISION "200508100000Z" DESCRIPTION "Add new objects - catsPvcOamLpbkTimeoutCnts - catsPvcNewOamLpbkTimeoutDur - catsPvcActiveOamLpbkTimeoutDur - catsPvcOamLpbkTimeoutThreshold" REVISION "200405120000Z" DESCRIPTION "Initial version of the MIB." ::= { ciscoMgmt 407 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.407.0 | ciscoAtmTrunkStatNotifs | 0 | 0 | None |
1.3.6.1.4.1.9.9.407.1 | ciscoAtmTrunkStatObjects | 1 | 89 | None |
1.3.6.1.4.1.9.9.407.2 | catsMIBConformance | 2 | 9 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.358 | ciscoBbsmMIB | 3 | 20 | This mib is designed to send BBSM specific notifications. There are variables that contain detail data that are bind to a notifi… |
1.3.6.1.4.1.9.9.359 | ciscoLicenseMIB | 3 | 52 | This MIB module provides objects to view the features and services that are licensed to run on a system (usually a network entity… |
1.3.6.1.4.1.9.9.360 | ciscoImageUpgradeMIB | 3 | 101 | This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and o… |
1.3.6.1.4.1.9.9.361 | ciscoCommonRolesMIB | 3 | 40 | MIB module for managing the common roles between access methods like Command Line Interface (CLI), SNMP and XML interfaces. Every … |
1.3.6.1.4.1.9.9.362 | ciscoPortStormControlMIB | 3 | 41 | The MIB module for managing Cisco Port Storm Control. |
1.3.6.1.4.1.9.9.363 | ciscoFcSpanMIB | 2 | 49 | MIB module for displaying and configuring Switched Port Analyzer(SPAN) related features in a Fibre Channel device. SPAN is a featu… |
1.3.6.1.4.1.9.9.364 | ciscoPsmMIB | 3 | 213 | The MIB module for the management of the Port Security Manager (PSM). The PSM consists of 2 aspects: Port binding and Fabric bindi… |
1.3.6.1.4.1.9.9.365 | ciscoFCCMIB | 3 | 42 | The MIB module for the management of Fibre Channel Congestion Control(FCC). FCC is a Cisco proprietary flow control mechanism tha… |
1.3.6.1.4.1.9.9.367 | ciscoAAAServerExtMIB | 2 | 77 | This MIB is an extension to the CISCO-AAA-SERVER-MIB. This MIB module enhances the 'casConfigTable' to include other types of Ser… |
1.3.6.1.4.1.9.9.368 | 368 | 0 | 0 | Cisco Content Services (CSS) switch product, also known as Arrowpoint, for version 7.40 and later |
1.3.6.1.4.1.9.9.369 | ciscoLicenseMgrMIB | 3 | 74 | The MIB module for a method of managing license files on the system. Licensing mechanism provides more flexibility in supporting v… |
1.3.6.1.4.1.9.9.370 | ciscoSslProxyMIB | 3 | 372 | This MIB module is for managing a Secure Socket Layer (SSL) Proxy device which terminates and accelarates SSL and Transport Layer… |
1.3.6.1.4.1.9.9.371 | ciscoIvrMIB | 3 | 192 | The MIB module for the management of Inter-VSAN routing within the framework of Cisco's Inter-VSAN Routing (IVR) Architecture. IV… |
1.3.6.1.4.1.9.9.372 | ciscoIsnsClientMIB | 3 | 16 | MIB module for monitoring and configuring Internet Storage Name Service (iSNS) client. |
1.3.6.1.4.1.9.9.373 | ciscoFdmiMIB | 3 | 47 | Fabric Device Management Interface (FDMI) MIB. This MIB module defines objects for managing the devices such as HBA (Host Bus Ada… |
1.3.6.1.4.1.9.9.374 | ciscoDynamicArpInspectionMIB | 3 | 82 | The MIB module is for configuration of Dynamic ARP Inspection feature. Dynamic ARP Inspection is a security mechanism which valid… |
1.3.6.1.4.1.9.9.375 | ciscoFiconMIB | 3 | 176 | This is the FICON (FIber CONnection) MIB module. FICON is an IBM standard of transport mechanism for communication between the ma… |
1.3.6.1.4.1.9.9.376 | ciscoSVIAutostateMIB | 3 | 19 | The MIB module is for configuration of the switch virtual interface (SVI) autostate feature. Autostate feature is a mechanism to … |
1.3.6.1.4.1.9.9.377 | ciscoFeatureCtrlMIB | 3 | 53 | There are two types of features in the system: - Regular features - Optional features The Regular features may or may not need to … |
1.3.6.1.4.1.9.9.378 | ciscoSvcInterfaceMIB | 3 | 115 | MIB module for displaying and configuring SVC (SAN Volume Controller) related features in the Storage Area Network (SAN) switches… |
1.3.6.1.4.1.9.9.379 | ciscoItpmMIB | 3 | 47 | The MIB for providing information related to monitoring SS7 links. This information can be used to manage the state of software u… |
1.3.6.1.4.1.9.9.380 | ciscoDhcpSnoopingMIB | 3 | 127 | The MIB module is for configuration of DHCP Snooping feature. DHCP Snooping is a security mechanism which uses information gleane… |
1.3.6.1.4.1.9.9.381 | ciscoDiffServExtMIB | 2 | 49 | This MIB is a Cisco extension to the DIFFSERV-MIB, RFC 3289. This MIB defines a Fibre Channel (FC) Multi Field filter to be used i… |
1.3.6.1.4.1.9.9.383 | ciscoCidsMIB | 3 | 183 | Cisco Intrusion Detection System MIB. Provides trap definitions for the evAlert and evError elements of the IDIOM (Intrusion Det… |
1.3.6.1.4.1.9.9.384 | ciscoDot11AntennaMIB | 2 | 11 | This MIB is intended to be implemented on 802.11 Access Points and Wireless Bridges to provide information about the antennas con… |
1.3.6.1.4.1.9.9.385 | ciscoUnityMIB | 3 | 101 | The MIB Module for the management of Cisco Unity server. Cisco Unity is a Unified Communications solution that provides advanced,… |
1.3.6.1.4.1.9.9.386 | ciscoModuleAutoShutdownMIB | 3 | 36 | The CISCO-MODULE-AUTO-SHUTDOWN-MIB is used to configure the module automatic shutdown feature. Modules will be reset by the syste… |
1.3.6.1.4.1.9.9.387 | ciscoNetflowMIB | 3 | 206 | The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics.… |
1.3.6.1.4.1.9.9.388 | ciscoVirtualSwitchMIB | 3 | 128 | This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines sev… |
1.3.6.1.4.1.9.9.389 | ciscoVoiceCasModuleMIB | 3 | 22 | This MIB is used to support Programmable CAS signaling Bit configuration on modules that support voice traffic. This MIB will enab… |
1.3.6.1.4.1.9.9.390 | ciscoCableDiagMIB | 3 | 33 | This MIB module defines objects for managing cable diagnostic test capabilites supported by the Cisco devices. Cable diagnostic t… |
1.3.6.1.4.1.9.9.391 | ciscoFcspMIB | 3 | 46 | MIB module for managing Fibre Channel Security for the fibre channel devices. This MIB is used to configure and monitor the Fibre-… |
1.3.6.1.4.1.9.9.392 | ciscoRemoteAccessMonitorMIB | 3 | 199 | Acronyms and Definitions The following acronyms and terms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Priv… |
1.3.6.1.4.1.9.9.393 | ciscoVoiceConnectivityMIB | 3 | 44 | This MIB module provides connectivity related information for devices (e.g., 'connectivity between voice gateway, phones, gatekee… |
1.3.6.1.4.1.9.9.394 | ciscoIpTapMIB | 3 | 28 | This module manages Cisco's intercept feature for IP. This MIB is used along with CISCO-TAP2-MIB to intercept IP traffic. CISCO-T… |
1.3.6.1.4.1.9.9.395 | cisco802TapMIB | 3 | 20 | This module manages Cisco's intercept feature for 802 (layer 2) streams. This MIB is used along with CISCO-TAP2-MIB to intercept 8… |
1.3.6.1.4.1.9.9.396 | ciscoMlrMIB | 3 | 190 | The MIB for providing information about Multi-layer Routing(MLR). This MIB will provide information used to control and measure S… |
1.3.6.1.4.1.9.9.397 | ciscoH225MIB | 1 | 176 | Cisco H225 MIB module. This module consists of H225 call signaling and H225 RAS (Registration, Admission and Status). These are p… |
1.3.6.1.4.1.9.9.398 | ciscoMauExtMIB | 3 | 23 | A MIB module for extending the MAU-MIB (RFC 3636) to add objects which provide additional management information about MAU or Jac… |
1.3.6.1.4.1.9.9.399 | ciscoTap2MIB | 3 | 69 | This module manages Cisco's intercept feature. This MIB replaces CISCO-TAP-MIB. This MIB defines a generic stream table that cont… |
1.3.6.1.4.1.9.9.400 | ciscoUserConnectionTapMIB | 2 | 13 | This module manages Cisco's intercept feature for user connections. This MIB is used along with CISCO-TAP2-MIB to intercept user t… |
1.3.6.1.4.1.9.9.401 | ciscoBridgeExtMIB | 3 | 34 | A MIB module for extending BRIDGE-MIB specified in RFC 1493. |
1.3.6.1.4.1.9.9.402 | ciscoPowerEthernetExtMIB | 3 | 79 | A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about … |
1.3.6.1.4.1.9.9.405 | ciscoDnsServerMIB | 3 | 400 | The MIB module for entities implementing the server side of the Domain Name System (DNS) protocol. P. Mockapetris, 'Domain names … |
1.3.6.1.4.1.9.9.408 | ciscoSnmpNotificationExtMIB | 3 | 13 | This MIB extends the functionality provided by SNMP-NOTIFICATION-MIB. This MIB provides for the aging of the notification filters … |
1.3.6.1.4.1.9.9.409 | ciscoSnmpVacmExtMIB | 2 | 11 | The management information definitions to extend the View-based Access Control Model (RFC3415) for SNMP. This MIB extends the 'SN… |
1.3.6.1.4.1.9.9.411 | ciscoVlanTranslationMIB | 3 | 27 | The MIB module for the management of VLAN translations. VLAN translation refers to the ability of the device to translate between… |
1.3.6.1.4.1.9.9.412 | ciscoSnmpTargetExtMIB | 2 | 30 | This MIB is an extension of the SNMP-TARGET-MIB specified in RFC3413. This MIB module contains Cisco-defined extension to the sn… |
1.3.6.1.4.1.9.9.413 | ciscoDot11SsidSecMIB | 2 | 71 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN devices association and authentication. ACR… |
1.3.6.1.4.1.9.9.414 | ciscoPoePdMIB | 3 | 17 | This MIB is intended for devices powered by external power sources, in particular Power Over Ethernet (PoE or formerly called inl… |
1.3.6.1.4.1.9.9.415 | ciscoWlanManMIB | 3 | 13 | This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. ACRONYMS HTTP Hypertext … |
1.3.6.1.4.1.9.9.416 | ciscoDot11QosMIB | 3 | 49 | This MIB module provides network management support for QoS on wireless LAN devices. The objects defined in this MIB provide equ… |
1.3.6.1.4.1.9.9.420 | ciscoUnityExpressMIB | 3 | 179 | The MIB Module for the management of the Cisco Unity Express (CUE) service. CUE is a voicemail service that runs in a Cisco rout… |
1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | 3 | 55 | The MIB module for the management of the Dynamic Port Vsan Membership (DPVM) module. DPVM provides the ability to assign (virtual… |
1.3.6.1.4.1.9.9.422 | ciscoIPsecTc | 0 | 0 | This MIB module defines the textual conventions used in the IPsec suite of MIBs. This includes Internet DOI numbers defined in RF… |
1.3.6.1.4.1.9.9.423 | ciscoIkeConfigMIB | 3 | 93 | This is a MIB Module for configuring and viewing IKE parameters and policies. Acronyms The following acronyms are used in this do… |
1.3.6.1.4.1.9.9.424 | ciscoCableMeteringMIB | 3 | 53 | This is the MIB module for Usage Based Metering for the DOCSIS-compliant Cable Modem Termination Systems (CMTS). Usage Based Mete… |
1.3.6.1.4.1.9.9.426 | ciscoLinkErrorMonitorMIB | 3 | 34 | The MIB module for managing Link Error Monitoring Feature on devices. Link Error Monitoring Feature provides a mechanism to monito… |
1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | 3 | 33 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
1.3.6.1.4.1.9.9.428 | ciscoIkeFlowExtMIB | 3 | 18 | This MIB module is an extension to CISCO-IKE-FLOW-MIB and contains Cisco Specific extensions for monitoring IKE. It is for monito… |
1.3.6.1.4.1.9.9.429 | ciscoIkeFlowMIB | 3 | 80 | This is a MIB module for monitoring the structures and status of IPsec control flows based on Internet Key Exchange protocol. The… |
1.3.6.1.4.1.9.9.430 | ciscoFcDeviceAliasMIB | 3 | 14 | The MIB module for the management of Device Aliases in a Fibre Channel Fabric. A Fibre Channel fabric consists of devices such as… |
1.3.6.1.4.1.9.9.431 | ciscoIPsecProvisioningMIB | 3 | 98 | IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations.… |
1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | 3 | 330 | This is a MIB Module for monitoring the structures and status of IPSec-based networks. The MIB has been designed to be adopted as… |
1.3.6.1.4.1.9.9.433 | ciscoCFSMIB | 3 | 102 | This MIB applies to one or more of a set of devices which have connectivity through some kind of 'fabric'. Many features which ru… |
1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB | 3 | 58 | MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric… |
1.3.6.1.4.1.9.9.435 | ciscoFcMulticastMIB | 3 | 14 | MIB module for monitoring and configuring Fibre Channel Multicast feature. |
1.3.6.1.4.1.9.9.436 | ciscoDNSClientMIB | 3 | 28 | The MIB module for entities implementing the client side of the Domain Name System (DNS) protocol. |
1.3.6.1.4.1.9.9.437 | ciscoPortTrackMIB | 2 | 18 | A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the o… |
1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | 3 | 140 | This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols us… |
1.3.6.1.4.1.9.9.439 | ciscoCcmeMIB | 3 | 338 | This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enabl… |
1.3.6.1.4.1.9.9.441 | ciscoSrstMIB | 3 | 149 | This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software fe… |
1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
... |