The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all console displays,
such as 'serial 0', 'serial 3/0.3', etc.
Parsed from file CISCO-FRAME-RELAY-MIB.mib
Module: CISCO-FRAME-RELAY-MIB
The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all console displays,
such as 'serial 0', 'serial 3/0.3', etc.
The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all console displays,
such as 'serial 0', 'serial 3/0.3', etc.
Parsed from file CISCO-FRAME-RELAY-MIB.my.txt
Company: None
Module: CISCO-FRAME-RELAY-MIB
The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all console displays,
such as 'serial 0', 'serial 3/0.3', etc.
cfrExtCircuitIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc." ::= { cfrExtCircuitEntry 1 }
cfrExtCircuitIfName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc." ::= { cfrExtCircuitEntry 1 }
Vendor: Cisco
Module: CISCO-FRAME-RELAY-MIB
[Automatically extracted from oidview.com]
cfrExtCircuitIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc." ::= { cfrExtCircuitEntry 1 }
cfrExtCircuitIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc." ::= { cfrExtCircuitEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.49.1.2.2.1.2 | cfrExtCircuitIfType | 0 | 0 | Type of the subinterface this DLCI is associated with, if configured. |
1.3.6.1.4.1.9.9.49.1.2.2.1.3 | cfrExtCircuitSubifIndex | 0 | 0 | For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLC… |
1.3.6.1.4.1.9.9.49.1.2.2.1.4 | cfrExtCircuitMapStatus | 0 | 0 | cfrExtCircuitMapStatus OBJECT-TYPE SYNTAX INTEGER (0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The mapping protoc… |
1.3.6.1.4.1.9.9.49.1.2.2.1.5 | cfrExtCircuitCreateType | 0 | 0 | Identify the last source of the circuit's creation. |
1.3.6.1.4.1.9.9.49.1.2.2.1.6 | cfrExtCircuitMulticast | 0 | 0 | Indicate if this DLCI is a multicast DLCI. |
1.3.6.1.4.1.9.9.49.1.2.2.1.7 | cfrExtCircuitRoutedDlci | 0 | 0 | The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLC… |
1.3.6.1.4.1.9.9.49.1.2.2.1.8 | cfrExtCircuitRoutedIf | 0 | 0 | The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that… |
1.3.6.1.4.1.9.9.49.1.2.2.1.9 | cfrExtCircuitUncompressIns | 0 | 0 | Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the… |
1.3.6.1.4.1.9.9.49.1.2.2.1.10 | cfrExtCircuitUncompressOuts | 0 | 0 | Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the… |
1.3.6.1.4.1.9.9.49.1.2.2.1.11 | cfrExtCircuitFECNOuts | 0 | 0 | Total number of frames sent out to the network indicating forward congestion. |
1.3.6.1.4.1.9.9.49.1.2.2.1.12 | cfrExtCircuitBECNOuts | 0 | 0 | Total number of frames sent out to the network indicating backward congestion. |
1.3.6.1.4.1.9.9.49.1.2.2.1.13 | cfrExtCircuitMinThruputOut | 0 | 0 | Circuit's outgoing minimal Throughput based on configuration. |
1.3.6.1.4.1.9.9.49.1.2.2.1.14 | cfrExtCircuitMinThruputIn | 0 | 0 | Circuit's incoming minimal Throughput based on configuration. |
1.3.6.1.4.1.9.9.49.1.2.2.1.15 | cfrExtCircuitBcastPktOuts | 0 | 0 | Total number of broadcast packets sent out to the network. |
1.3.6.1.4.1.9.9.49.1.2.2.1.16 | cfrExtCircuitBcastByteOuts | 0 | 0 | Total number of bytes sent out to the network in broadcast packets. |
1.3.6.1.4.1.9.9.49.1.2.2.1.17 | cfrExtCircuitBandwidth | 0 | 0 | Bandwidth of the virtual circuit, acquired from Cisco typed LMI Full Status message. |
1.3.6.1.4.1.9.9.49.1.2.2.1.18 | cfrExtCircuitShapeByteLimit | 0 | 0 | Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.19 | cfrExtCircuitShapeInterval | 0 | 0 | Committed rate measurement interval. |
1.3.6.1.4.1.9.9.49.1.2.2.1.20 | cfrExtCircuitShapeByteIncrement | 0 | 0 | Number of tokens added into the token bucket per time interval in case of traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.21 | cfrExtCircuitShapePkts | 0 | 0 | Total number of packets that went through traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.22 | cfrExtCircuitShapeBytes | 0 | 0 | Total number of bytes that went through traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.23 | cfrExtCircuitShapePktsDelay | 0 | 0 | Total number of packets that were delayed by the traffic shaper. |
1.3.6.1.4.1.9.9.49.1.2.2.1.24 | cfrExtCircuitShapeBytesDelay | 0 | 0 | Total number of bytes that were delayed by the traffic shaper. |
1.3.6.1.4.1.9.9.49.1.2.2.1.25 | cfrExtCircuitShapeActive | 0 | 0 | Shows whether shaping is active or not. |
1.3.6.1.4.1.9.9.49.1.2.2.1.26 | cfrExtCircuitShapeAdapting | 0 | 0 | Type of Adaptive Shaping configured. none(1) - No adaptive shaping configured becn(2) - Backward Explicit Congestion No… |
1.3.6.1.4.1.9.9.49.1.2.2.1.27 | cfrExtCircuitTxDataRate | 0 | 0 | The average rate (bytes/second) at which data is transmitted in this circuit. |
1.3.6.1.4.1.9.9.49.1.2.2.1.28 | cfrExtCircuitTxPktRate | 0 | 0 | The average number of packets sent in a second in this circuit. |
1.3.6.1.4.1.9.9.49.1.2.2.1.29 | cfrExtCircuitRcvDataRate | 0 | 0 | The average rate (bytes/second) at which data is received in this circuit. |
1.3.6.1.4.1.9.9.49.1.2.2.1.30 | cfrExtCircuitRcvPktRate | 0 | 0 | The average number of packets received in a second in this circuit. |