The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI.
Parsed from file CISCO-FRAME-RELAY-MIB.mib
Module: CISCO-FRAME-RELAY-MIB
The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI.
cfrExtCircuitRoutedDlci OBJECT-TYPE
SYNTAX DlciNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI."
View at oid-info.com
The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI.
Parsed from file CISCO-FRAME-RELAY-MIB.my.txt
Company: None
Module: CISCO-FRAME-RELAY-MIB
The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI.
cfrExtCircuitRoutedDlci OBJECT-TYPE SYNTAX DlciNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI." ::= { cfrExtCircuitEntry 7 }
cfrExtCircuitRoutedDlci OBJECT-TYPE SYNTAX DlciNumber ACCESS read-only STATUS mandatory DESCRIPTION "The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI." ::= { cfrExtCircuitEntry 7 }
Automatically extracted from Cisco "SNMP v2 MIBs".
cfrExtCircuitRoutedDlci OBJECT-TYPE SYNTAX DlciNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI." ::= { cfrExtCircuitEntry 7 }
cfrExtCircuitRoutedDlci OBJECT-TYPE SYNTAX DlciNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI." ::= { cfrExtCircuitEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.49.1.2.2.1.1 | cfrExtCircuitIfName | 0 | 0 | The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an … |
1.3.6.1.4.1.9.9.49.1.2.2.1.2 | cfrExtCircuitIfType | 0 | 0 | Type of the subinterface this DLCI is associated with, if configured. |
1.3.6.1.4.1.9.9.49.1.2.2.1.3 | cfrExtCircuitSubifIndex | 0 | 0 | For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLC… |
1.3.6.1.4.1.9.9.49.1.2.2.1.4 | cfrExtCircuitMapStatus | 0 | 0 | cfrExtCircuitMapStatus OBJECT-TYPE SYNTAX INTEGER (0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The mapping protoc… |
1.3.6.1.4.1.9.9.49.1.2.2.1.5 | cfrExtCircuitCreateType | 0 | 0 | Identify the last source of the circuit's creation. |
1.3.6.1.4.1.9.9.49.1.2.2.1.6 | cfrExtCircuitMulticast | 0 | 0 | Indicate if this DLCI is a multicast DLCI. |
1.3.6.1.4.1.9.9.49.1.2.2.1.8 | cfrExtCircuitRoutedIf | 0 | 0 | The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that… |
1.3.6.1.4.1.9.9.49.1.2.2.1.9 | cfrExtCircuitUncompressIns | 0 | 0 | Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the… |
1.3.6.1.4.1.9.9.49.1.2.2.1.10 | cfrExtCircuitUncompressOuts | 0 | 0 | Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the… |
1.3.6.1.4.1.9.9.49.1.2.2.1.11 | cfrExtCircuitFECNOuts | 0 | 0 | Total number of frames sent out to the network indicating forward congestion. |
1.3.6.1.4.1.9.9.49.1.2.2.1.12 | cfrExtCircuitBECNOuts | 0 | 0 | Total number of frames sent out to the network indicating backward congestion. |
1.3.6.1.4.1.9.9.49.1.2.2.1.13 | cfrExtCircuitMinThruputOut | 0 | 0 | Circuit's outgoing minimal Throughput based on configuration. |
1.3.6.1.4.1.9.9.49.1.2.2.1.14 | cfrExtCircuitMinThruputIn | 0 | 0 | Circuit's incoming minimal Throughput based on configuration. |
1.3.6.1.4.1.9.9.49.1.2.2.1.15 | cfrExtCircuitBcastPktOuts | 0 | 0 | Total number of broadcast packets sent out to the network. |
1.3.6.1.4.1.9.9.49.1.2.2.1.16 | cfrExtCircuitBcastByteOuts | 0 | 0 | Total number of bytes sent out to the network in broadcast packets. |
1.3.6.1.4.1.9.9.49.1.2.2.1.17 | cfrExtCircuitBandwidth | 0 | 0 | Bandwidth of the virtual circuit, acquired from Cisco typed LMI Full Status message. |
1.3.6.1.4.1.9.9.49.1.2.2.1.18 | cfrExtCircuitShapeByteLimit | 0 | 0 | Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.19 | cfrExtCircuitShapeInterval | 0 | 0 | Committed rate measurement interval. |
1.3.6.1.4.1.9.9.49.1.2.2.1.20 | cfrExtCircuitShapeByteIncrement | 0 | 0 | Number of tokens added into the token bucket per time interval in case of traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.21 | cfrExtCircuitShapePkts | 0 | 0 | Total number of packets that went through traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.22 | cfrExtCircuitShapeBytes | 0 | 0 | Total number of bytes that went through traffic shaping. |
1.3.6.1.4.1.9.9.49.1.2.2.1.23 | cfrExtCircuitShapePktsDelay | 0 | 0 | Total number of packets that were delayed by the traffic shaper. |
1.3.6.1.4.1.9.9.49.1.2.2.1.24 | cfrExtCircuitShapeBytesDelay | 0 | 0 | Total number of bytes that were delayed by the traffic shaper. |
1.3.6.1.4.1.9.9.49.1.2.2.1.25 | cfrExtCircuitShapeActive | 0 | 0 | Shows whether shaping is active or not. |
1.3.6.1.4.1.9.9.49.1.2.2.1.26 | cfrExtCircuitShapeAdapting | 0 | 0 | Type of Adaptive Shaping configured. none(1) - No adaptive shaping configured becn(2) - Backward Explicit Congestion No… |
1.3.6.1.4.1.9.9.49.1.2.2.1.27 | cfrExtCircuitTxDataRate | 0 | 0 | The average rate (bytes/second) at which data is transmitted in this circuit. |
1.3.6.1.4.1.9.9.49.1.2.2.1.28 | cfrExtCircuitTxPktRate | 0 | 0 | The average number of packets sent in a second in this circuit. |
1.3.6.1.4.1.9.9.49.1.2.2.1.29 | cfrExtCircuitRcvDataRate | 0 | 0 | The average rate (bytes/second) at which data is received in this circuit. |
1.3.6.1.4.1.9.9.49.1.2.2.1.30 | cfrExtCircuitRcvPktRate | 0 | 0 | The average number of packets received in a second in this circuit. |