This field is used to specify the VRF name with
which the IP SLA operation will be used. For regular IP SLA
operation this field should not be configured. The agent
will use this field to identify the VRF routing Table for
this operation.
Parsed from file CISCO-IPSLA-ECHO-MIB.mib
Module: CISCO-IPSLA-ECHO-MIB
This field is used to specify the VRF name with
which the IP SLA operation will be used. For regular IP SLA
operation this field should not be configured. The agent
will use this field to identify the VRF routing Table for
this operation.
This field is used to specify the VRF name with
which the IP SLA operation will be used. For regular IP SLA
operation this field should not be configured. The agent
will use this field to identify the VRF routing Table for
this operation.
Parsed from file CISCO-IPSLA-ECHO-MIB.my.txt
Company: None
Module: CISCO-IPSLA-ECHO-MIB
This field is used to specify the VRF name with
which the IP SLA operation will be used. For regular IP SLA
operation this field should not be configured. The agent
will use this field to identify the VRF routing Table for
this operation.
cipslaUdpEchoTmplVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing Table for this operation." DEFVAL { "" } ::= { cipslaUdpEchoTmplEntry 11 }
cipslaUdpEchoTmplVrfName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing Table for this operation." DEFVAL { "" } ::= { cipslaUdpEchoTmplEntry 11 }
Vendor: Cisco
Module: CISCO-IPSLA-ECHO-MIB
[Automatically extracted from oidview.com]
cipslaUdpEchoTmplVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing Table for this operation." DEFVAL { "" } ::= { cipslaUdpEchoTmplEntry 11 }
cipslaUdpEchoTmplVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing Table for this operation." DEFVAL { "" } ::= { cipslaUdpEchoTmplEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.636.1.2.1.1 | cipslaUdpEchoTmplName | 0 | 0 | A string which specifies the UDP echo template name. |
1.3.6.1.4.1.9.9.636.1.2.1.2 | cipslaUdpEchoTmplDescription | 0 | 0 | A string which provides description to the UDP echo template. |
1.3.6.1.4.1.9.9.636.1.2.1.3 | cipslaUdpEchoTmplControlEnable | 0 | 0 | If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router t… |
1.3.6.1.4.1.9.9.636.1.2.1.4 | cipslaUdpEchoTmplSrcAddrType | 0 | 0 | An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaUdpEchoTmplSrcAddr ob… |
1.3.6.1.4.1.9.9.636.1.2.1.5 | cipslaUdpEchoTmplSrcAddr | 0 | 0 | A string which specifies the IP address of the source. |
1.3.6.1.4.1.9.9.636.1.2.1.6 | cipslaUdpEchoTmplSrcPort | 0 | 0 | This object represents the source's port number. If this object is not specified, the application will get a port allocated by th… |
1.3.6.1.4.1.9.9.636.1.2.1.7 | cipslaUdpEchoTmplTimeOut | 0 | 0 | Specifies the duration to wait for an IP SLA operation completion. For connection oriented protocols, this may cause the connectio… |
1.3.6.1.4.1.9.9.636.1.2.1.8 | cipslaUdpEchoTmplVerifyData | 0 | 0 | When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header … |
1.3.6.1.4.1.9.9.636.1.2.1.9 | cipslaUdpEchoTmplReqDataSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protoco… |
1.3.6.1.4.1.9.9.636.1.2.1.10 | cipslaUdpEchoTmplTOS | 0 | 0 | This object represents the type of service octet in an IP header. |
1.3.6.1.4.1.9.9.636.1.2.1.12 | cipslaUdpEchoTmplThreshold | 0 | 0 | This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition speci… |
1.3.6.1.4.1.9.9.636.1.2.1.13 | cipslaUdpEchoTmplHistLives | 0 | 0 | The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroup… |
1.3.6.1.4.1.9.9.636.1.2.1.14 | cipslaUdpEchoTmplHistBuckets | 0 | 0 | The maximum number of history buckets to record. This value should be set to the number of operations to keep per lifetime. After … |
1.3.6.1.4.1.9.9.636.1.2.1.15 | cipslaUdpEchoTmplHistFilter | 0 | 0 | Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the re… |
1.3.6.1.4.1.9.9.636.1.2.1.16 | cipslaUdpEchoTmplStatsHours | 0 | 0 | The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before … |
1.3.6.1.4.1.9.9.636.1.2.1.17 | cipslaUdpEchoTmplDistBuckets | 0 | 0 | The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdp… |
1.3.6.1.4.1.9.9.636.1.2.1.18 | cipslaUdpEchoTmplDistInterval | 0 | 0 | The statistical distribution buckets interval. Distribution Bucket Example: cipslaUdpEchoTmplDistBuckets = 5 buckets cipslaUdpEcho… |
1.3.6.1.4.1.9.9.636.1.2.1.19 | cipslaUdpEchoTmplStorageType | 0 | 0 | The storage type of this conceptual row. |
1.3.6.1.4.1.9.9.636.1.2.1.20 | cipslaUdpEchoTmplRowStatus | 0 | 0 | The status of the conceptual UDP echo template control row. When the status is active, all the read-create objects in that row ca… |