Defines a filter for adding RTT results to the history
buffer:
none(1) - no history is recorded
all(2) - the results of all completion times
and failed completions are recorded
overThreshold(3) - the results of completion times
over cipslaUdpEchoTmplThreshold are
recorded.
failures(4) - the results of failed operations (only)
are recorded.
Parsed from file CISCO-IPSLA-ECHO-MIB.mib
Module: CISCO-IPSLA-ECHO-MIB
Defines a filter for adding RTT results to the history
buffer:
none(1) - no history is recorded
all(2) - the results of all completion times
and failed completions are recorded
overThreshold(3) - the results of completion times
over cipslaUdpEchoTmplThreshold are
recorded.
failures(4) - the results of failed operations (only)
are recorded.
Defines a filter for adding RTT results to the history
buffer:
none(1) - no history is recorded
all(2) - the results of all completion times
and failed completions are recorded
overThreshold(3) - the results of completion times
over cipslaUdpEchoTmplThreshold are
recorded.
failures(4) - the results of failed operations (only)
are recorded.
Parsed from file CISCO-IPSLA-ECHO-MIB.my.txt
Company: None
Module: CISCO-IPSLA-ECHO-MIB
Defines a filter for adding RTT results to the history
buffer:
none(1) - no history is recorded
all(2) - the results of all completion times
and failed completions are recorded
overThreshold(3) - the results of completion times
over cipslaUdpEchoTmplThreshold are
recorded.
failures(4) - the results of failed operations (only)
are recorded.
cipslaUdpEchoTmplHistFilter OBJECT-TYPE SYNTAX INTEGER { none(1), all(2), overThreshold(3), failures(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaUdpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded." DEFVAL { none } ::= { cipslaUdpEchoTmplEntry 15 }
cipslaUdpEchoTmplHistFilter OBJECT-TYPE SYNTAX INTEGER { none(1), all(2), overThreshold(3), failures(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaUdpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded." DEFVAL { none } ::= { cipslaUdpEchoTmplEntry 15 }
Vendor: Cisco
Module: CISCO-IPSLA-ECHO-MIB
[Automatically extracted from oidview.com]
cipslaUdpEchoTmplHistFilter OBJECT-TYPE SYNTAX INTEGER { none(1), all(2), overThreshold(3), failures(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaUdpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded." DEFVAL { none } ::= { cipslaUdpEchoTmplEntry 15 }
cipslaUdpEchoTmplHistFilter OBJECT-TYPE SYNTAX INTEGER { none(1), all(2), overThreshold(3), failures(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaUdpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded." DEFVAL { none } ::= { cipslaUdpEchoTmplEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.636.1.2.1.1 | cipslaUdpEchoTmplName | 0 | 0 | A string which specifies the UDP echo template name. |
| 1.3.6.1.4.1.9.9.636.1.2.1.2 | cipslaUdpEchoTmplDescription | 0 | 0 | A string which provides description to the UDP echo template. |
| 1.3.6.1.4.1.9.9.636.1.2.1.3 | cipslaUdpEchoTmplControlEnable | 0 | 0 | If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router t… |
| 1.3.6.1.4.1.9.9.636.1.2.1.4 | cipslaUdpEchoTmplSrcAddrType | 0 | 0 | An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaUdpEchoTmplSrcAddr ob… |
| 1.3.6.1.4.1.9.9.636.1.2.1.5 | cipslaUdpEchoTmplSrcAddr | 0 | 0 | A string which specifies the IP address of the source. |
| 1.3.6.1.4.1.9.9.636.1.2.1.6 | cipslaUdpEchoTmplSrcPort | 0 | 0 | This object represents the source's port number. If this object is not specified, the application will get a port allocated by th… |
| 1.3.6.1.4.1.9.9.636.1.2.1.7 | cipslaUdpEchoTmplTimeOut | 0 | 0 | Specifies the duration to wait for an IP SLA operation completion. For connection oriented protocols, this may cause the connectio… |
| 1.3.6.1.4.1.9.9.636.1.2.1.8 | cipslaUdpEchoTmplVerifyData | 0 | 0 | When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header … |
| 1.3.6.1.4.1.9.9.636.1.2.1.9 | cipslaUdpEchoTmplReqDataSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protoco… |
| 1.3.6.1.4.1.9.9.636.1.2.1.10 | cipslaUdpEchoTmplTOS | 0 | 0 | This object represents the type of service octet in an IP header. |
| 1.3.6.1.4.1.9.9.636.1.2.1.11 | cipslaUdpEchoTmplVrfName | 0 | 0 | This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field … |
| 1.3.6.1.4.1.9.9.636.1.2.1.12 | cipslaUdpEchoTmplThreshold | 0 | 0 | This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition speci… |
| 1.3.6.1.4.1.9.9.636.1.2.1.13 | cipslaUdpEchoTmplHistLives | 0 | 0 | The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroup… |
| 1.3.6.1.4.1.9.9.636.1.2.1.14 | cipslaUdpEchoTmplHistBuckets | 0 | 0 | The maximum number of history buckets to record. This value should be set to the number of operations to keep per lifetime. After … |
| 1.3.6.1.4.1.9.9.636.1.2.1.16 | cipslaUdpEchoTmplStatsHours | 0 | 0 | The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before … |
| 1.3.6.1.4.1.9.9.636.1.2.1.17 | cipslaUdpEchoTmplDistBuckets | 0 | 0 | The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdp… |
| 1.3.6.1.4.1.9.9.636.1.2.1.18 | cipslaUdpEchoTmplDistInterval | 0 | 0 | The statistical distribution buckets interval. Distribution Bucket Example: cipslaUdpEchoTmplDistBuckets = 5 buckets cipslaUdpEcho… |
| 1.3.6.1.4.1.9.9.636.1.2.1.19 | cipslaUdpEchoTmplStorageType | 0 | 0 | The storage type of this conceptual row. |
| 1.3.6.1.4.1.9.9.636.1.2.1.20 | cipslaUdpEchoTmplRowStatus | 0 | 0 | The status of the conceptual UDP echo template control row. When the status is active, all the read-create objects in that row ca… |