The MIB Module for managing the General Packet Radio
Service(GPRS) L2RLY related information on Servicing
GPRS Support Node(SGSN).
In GPRS network, a SGSN is typically implemented as
a single node; in cisco-Alcatel joint development,
it's split into Telecom part (T-node) and Datacom
part (D-node). T-nodes and D-nodes are connected
by two fast ethernets. A simple connectionless protocol
called L2RLY is used to provide service of forwarding
packet between T-unit and D-unit, flow control and
defending against the failure of a FE subnet.
Parsed from file CISCO-GPRS-L2RLY-MIB.mib
Module: CISCO-GPRS-L2RLY-MIB
The MIB Module for managing the General Packet Radio
Service(GPRS) L2RLY related information on Servicing
GPRS Support Node(SGSN).
In GPRS network, a SGSN is typically implemented as
a single node; in cisco-Alcatel joint development,
it's split into Telecom part (T-node) and Datacom
part (D-node). T-nodes and D-nodes are connected
by two fast ethernets. A simple connectionless protocol
called L2RLY is used to provide service of forwarding
packet between T-unit and D-unit, flow control and
defending against the failure of a FE subnet.
Parsed from file CISCO-GPRS-L2RLY-MIB.my.txt
Company: None
Module: CISCO-GPRS-L2RLY-MIB
The MIB Module for managing the General Packet Radio
Service(GPRS) L2RLY related information on Servicing
GPRS Support Node(SGSN).
In GPRS network, a SGSN is typically implemented as
a single node; in cisco-Alcatel joint development,
it's split into Telecom part (T-node) and Datacom
part (D-node). T-nodes and D-nodes are connected
by two fast ethernets. A simple connectionless protocol
called L2RLY is used to provide service of forwarding
packet between T-unit and D-unit, flow control and
defending against the failure of a FE subnet.
ciscoGprsL2rlyMIB MODULE-IDENTITY LAST-UPDATED "9812150000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB Module for managing the General Packet Radio Service(GPRS) L2RLY related information on Servicing GPRS Support Node(SGSN). In GPRS network, a SGSN is typically implemented as a single node; in cisco-Alcatel joint development, it's split into Telecom part (T-node) and Datacom part (D-node). T-nodes and D-nodes are connected by two fast ethernets. A simple connectionless protocol called L2RLY is used to provide service of forwarding packet between T-unit and D-unit, flow control and defending against the failure of a FE subnet. " ::= { ciscoMgmt 9993 }
ciscoGprsL2rlyMIB OBJECT IDENTIFIER ::= { ciscoMgmt 9993 }
Vendor: Cisco Systems
Module: CISCO-GPRS-L2RLY-MIB (CISCO-GPRS-L2RLY-MIB-V1SMI.my)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
ciscoGprsL2rlyMIB MODULE-IDENTITY LAST-UPDATED "9812150000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB Module for managing the General Packet Radio Service(GPRS) L2RLY related information on Servicing GPRS Support Node(SGSN). In GPRS network, a SGSN is typically implemented as a single node; in cisco-Alcatel joint development, it's split into Telecom part (T-node) and Datacom part (D-node). T-nodes and D-nodes are connected by two fast ethernets. A simple connectionless protocol called L2RLY is used to provide service of forwarding packet between T-unit and D-unit, flow control and defending against the failure of a FE subnet. " ::= { ciscoMgmt 9993 }
ciscoGprsL2rlyMIB MODULE-IDENTITY LAST-UPDATED "9812150000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB Module for managing the General Packet Radio Service(GPRS) L2RLY related information on Servicing GPRS Support Node(SGSN). In GPRS network, a SGSN is typically implemented as a single node; in cisco-Alcatel joint development, it's split into Telecom part (T-node) and Datacom part (D-node). T-nodes and D-nodes are connected by two fast ethernets. A simple connectionless protocol called L2RLY is used to provide service of forwarding packet between T-unit and D-unit, flow control and defending against the failure of a FE subnet. " ::= { ciscoMgmt 9993 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.9993.1 | ciscoGprsL2rlyObjects | 2 | 34 | None |
1.3.6.1.4.1.9.9.9993.2 | ciscoGprsL2rlyNotificationPrefix | 1 | 3 | None |
1.3.6.1.4.1.9.9.9993.3 | ciscoGprsL2rlyConformances | 2 | 5 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.9968 | ciscoIfCallServiceMIB | 3 | 16 | The MIB is used to manage call service state for interfaces on media gateway. |
1.3.6.1.4.1.9.9.9992 | ciscoGprsIsgsnMIB | 2 | 19 | The MIB Module for managing the General Packet Radio Service(GPRS) iSGSN protocol on Servicing GPRS Support Node (SGSN). In the Al… |
1.3.6.1.4.1.9.9.9997 | ciscoGtpDirectorMIB | 3 | 35 | None |
1.3.6.1.4.1.9.9.9999 | ciscoAal5ExtMIB, ciscoAtmConnInfoMIB, ciscoDs0CrossConnectMIB, ciscoFiberChannelTunnelMIB | 3 | 145 | This MIB is the RFC 1695 extension for Cisco product. It provides the additional AAL5 performance statistics of a VCC from RFC 16… |
... |