A bit field which describes the software functions
supported by this ES/1. The possible values are:
0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE,
0x0008 MESH, 0x0010 IPROUTER, 0x0020 NO_BPDU,
0x0040 RIP, 0x0100 PROXY, 0x0200 OSPF,
0x0400 IPX.
Parsed from file ctATX-mib.mib.txt
Company: None
Module: CTATX-MIB
A bit field which describes the software functions
supported by this ES/1. The possible values are:
0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE,
0x0008 MESH, 0x0010 IPROUTER, 0x0020 NO_BPDU,
0x0040 RIP, 0x0100 PROXY, 0x0200 OSPF,
0x0400 IPX.
Parsed from file CTATX-MIB.mib
Module: CTATX-MIB
configFunctions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A bit field which describes the software functions supported by this ES/1. The possible values are: 0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE, 0x0008 MESH, 0x0010 IPROUTER, 0x0020 NO_BPDU, 0x0040 RIP, 0x0100 PROXY, 0x0200 OSPF, 0x0400 IPX." ::= { config 5 }
Vendor: Sigma Network Systems, Inc.
Module: CTATX-MIB
[Automatically extracted from oidview.com]
configFunctions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A bit field which describes the software functions supported by this ES/1. The possible values are: 0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE, 0x0008 MESH, 0x0010 IPROUTER, 0x0020 NO_BPDU, 0x0040 RIP, 0x0100 PROXY, 0x0200 OSPF, 0x0400 IPX." ::= { config 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.97.3.3.1.5.0 | configFunctions | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.97.3.3.1.1 | configFatalErr | 1 | 1 | This is a 32 byte array which contains information about the cause of the previous system reset. This will describe the circumsta… |
1.3.6.1.4.1.97.3.3.1.2 | configAnyPass | 1 | 1 | The authentication password (0-24 bytes) which must match the community name in an SNMP PDU, in order for the operation to be per… |
1.3.6.1.4.1.97.3.3.1.3 | configGetPass | 1 | 1 | The authentication password (0-24 bytes) which must match the community name in an SNMP Get PDU (except for Debug or password par… |
1.3.6.1.4.1.97.3.3.1.4 | configNMSAddress | 1 | 1 | The address of the NMS to which Trap PDUs are to be sent. A value of zero indicates that Trap PDUs should be sent to the NMS last… |
1.3.6.1.4.1.97.3.3.1.6 | configPowerAc1 | 1 | 1 | Whether the first power supply has AC input. |
1.3.6.1.4.1.97.3.3.1.7 | configPowerAc2 | 1 | 1 | Whether the second power supply has AC input. |
1.3.6.1.4.1.97.3.3.1.8 | configPowerDc1 | 1 | 1 | Whether the first power supply provides DC voltage. |
1.3.6.1.4.1.97.3.3.1.9 | configPowerDc2 | 1 | 1 | Whether the second power supply provides DC voltage. |
1.3.6.1.4.1.97.3.3.1.10 | configPowerPresent1 | 1 | 1 | Whether the first power supply is present. |
1.3.6.1.4.1.97.3.3.1.11 | configPowerPresent2 | 1 | 1 | Whether the second power supply is present. |
1.3.6.1.4.1.97.3.3.1.12 | configAlarmDynamic | 1 | 1 | Whether changes in dynamic parameters (except for the dynamically learned addresses) should cause enterprise specific trap PDUs t… |
1.3.6.1.4.1.97.3.3.1.13 | configAlarmAddresses | 1 | 1 | Whether changes in the dynamically learned addresses should cause enterprise specific trap PDUs to be generated. |
1.3.6.1.4.1.97.3.3.1.14 | configStorageFailure | 1 | 1 | Whether the ES/1's storage facility for its configuration parameters has failed (the ES/1 may not be able to reboot after such a … |
1.3.6.1.4.1.97.3.3.1.15 | configAuthenticationFailure | 1 | 1 | All nulls, or the IP source address within the last SNMP PDU which caused an SNMP authentication failure. |
1.3.6.1.4.1.97.3.3.1.16 | configFddiPriority | 1 | 1 | Priority to use when forwarding packets to any FDDI port from any non-FDDI port. |
1.3.6.1.4.1.97.3.3.1.17 | configTprPriority | 1 | 1 | Priority to use when forwarding packets to any Token-Ring port from any non-Token-Ring port. |
1.3.6.1.4.1.97.3.3.1.19 | configDumpModule | 1 | 1 | Flag to select the module to dump on a crash. If set to a value of 1 to 7 the relevant module's memory will be sent to the UART p… |
1.3.6.1.4.1.97.3.3.1.20 | configDumpStart | 1 | 1 | Starting address of memory to dump upon detecting a fatal error. |
1.3.6.1.4.1.97.3.3.1.21 | configDumpEnd | 1 | 1 | Ending address of memory to dump upon detecting a fatal error. |