The fully qualified name of the critical process configuration
file. The critical process configuration file specifies jobs
which are required to be active on the system. If a required
job is not active on the system, a critProcMissing trap is
generated for the missing job. This variable permits SNMP
set-requests so that the critical process list may be modified
without stopping and restarting the subagent. This variable is
equivalent to the INITIAL_REQ_PS_FILENAME configuration file
parameter.
Parsed from file cmtka4v2.mib.txt
Company: comtek
Module: COMTEKA4-MIB
psReqProcFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The fully qualified name of the critical process configuration file. The critical process configuration file specifies jobs which are required to be active on the system. If a required job is not active on the system, a critProcMissing trap is generated for the missing job. This variable permits SNMP set-requests so that the critical process list may be modified without stopping and restarting the subagent. This variable is equivalent to the INITIAL_REQ_PS_FILENAME configuration file parameter. " ::= { configuration 11 }
ITU-T SG 17 & ISO/IEC JTC 1/SC 6
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
2.6.9.5.1 | cpuWaitTime | 0 | 0 | Number of seconds to wait between updates of the CPU group statistics. This variable is equivalent to the CPU_WAIT_TIME configura… |
2.6.9.5.2 | cpuThreshold | 0 | 0 | Percentage of CPU utilization at which a cpuExcessive trap should be sent to the SNMP manager. This value is expressed in tenths … |
2.6.9.5.3 | cpuResendPeriod | 0 | 0 | Number of times the CPU statistics should be updated before repeating a cpuExcessive trap. This variable is equivalent to the CPU… |
2.6.9.5.4 | diskWaitTime | 0 | 0 | Number of seconds to wait between updates of the disk group statistics. This variable is equivalent to the DISK_WAIT_TIME configu… |
2.6.9.5.5 | diskFullThreshold | 0 | 0 | Percentage of system storage pool (disk) utilization at which a diskFull trap should be sent to the SNMP manager. This value is … |
2.6.9.5.6 | diskFullClearThreshold | 0 | 0 | Percentage of system storage pool (disk) utilization at which a diskClear trap should be sent to the SNMP manager to indicate the… |
2.6.9.5.7 | diskResendPeriod | 0 | 0 | Number of times to gather disk group statistics before repeating a diskFull trap. This variable is equivalent to the DISK_RESEND_… |
2.6.9.5.8 | jobqWaitTime | 0 | 0 | Number of seconds to wait between updates of the job queue group statistics. This variable is equivalent to the JQ_WAIT_TIME con… |
2.6.9.5.9 | psWaitTime | 0 | 0 | Number of seconds to wait between updates of the active process group statistics. This variable is equivalent to the PS_WAIT_TIM… |
2.6.9.5.12 | qsysoprSeverity | 0 | 0 | The minimum QSYSOPR message severity level which is to be forwarded to the SNMP manager. QSYSOPR messages with a severity level b… |
2.6.9.5.13 | qhstWaitTime | 0 | 0 | Number of seconds to wait before rereading the QHST file. This variable is equivalent to the QHST_WAIT_TIME configuration file pa… |
2.6.9.5.14 | trapThrottle | 0 | 0 | Number of hundredths of seconds to wait between sending traps. This variable may be used as a throttle to prevent traps generated… |
2.6.9.5.15 | qsysoprMsgFilterFile | 0 | 0 | The fully qualified filename for the QSYSOPR message ID filter file. The filter can be configured to either forward or discard t… |
2.6.9.5.16 | qsysoprMaxMsgAge | 0 | 0 | Maximum age of QSYSOPR messages to forward to the SNMP manager as qsysoprMsg traps. This value is specified in minutes. This va… |