Reference record for OID 2.6.9.5.2

parent
2.6.9.5 (configuration)
node code
2
node name
cpuThreshold
dot oid
2.6.9.5.2
type
OBJECT-TYPE
asn1 oid
  • {joint-iso-itu-t(2) mhs(6) management(9) configuration(5) cpuThreshold(2)}
  • {joint-iso-ccitt(2) mhs(6) management(9) configuration(5) cpuThreshold(2)}
  • iri oid
  • /joint-iso-itu-t/mhs/management/configuration/cpuThreshold
  • /joint-iso-ccitt/mhs/management/configuration/cpuThreshold
  • Description by mibdepot

    Percentage of CPU utilization at which a cpuExcessive trap
    should be sent to the SNMP manager. This value is expressed
    in tenths of a percent. Thus 95% would be denoted 950. This
    variable is equivalent to the CPU_TRAP_THRESHOLD configuration
    file parameter.

    Parsed from file cmtka4v2.mib.txt
    Company: comtek
    Module: COMTEKA4-MIB

    Information by mibdepot

    cpuThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of CPU utilization at which a cpuExcessive trap should be sent to the SNMP manager. This value is expressed in tenths of a percent. Thus 95% would be denoted 950. This variable is equivalent to the CPU_TRAP_THRESHOLD configuration file parameter. " ::= { configuration 2 }

    First Registration Authority (recovered by parent 2.6)

    J. Craigie & C.-U. Manros

    Current Registration Authority (recovered by parent 2)

    ITU-T SG 17 & ISO/IEC JTC 1/SC 6

    Brothers (14)

    OIDNameSub childrenSub Nodes TotalDescription
    2.6.9.5.1 cpuWaitTime 0 0 Number of seconds to wait between updates of the CPU group
    statistics. This variable is equivalent to the CPU_WAIT_TIME
    configura…
    2.6.9.5.3 cpuResendPeriod 0 0 Number of times the CPU statistics should be updated before
    repeating a cpuExcessive trap. This variable is equivalent to
    the CPU…
    2.6.9.5.4 diskWaitTime 0 0 Number of seconds to wait between updates of the disk group
    statistics. This variable is equivalent to the DISK_WAIT_TIME
    configu…
    2.6.9.5.5 diskFullThreshold 0 0 Percentage of system storage pool (disk) utilization at which
    a diskFull trap should be sent to the SNMP manager. This value
    is …
    2.6.9.5.6 diskFullClearThreshold 0 0 Percentage of system storage pool (disk) utilization at which
    a diskClear trap should be sent to the SNMP manager to indicate
    the…
    2.6.9.5.7 diskResendPeriod 0 0 Number of times to gather disk group statistics before
    repeating a diskFull trap. This variable is equivalent to the
    DISK_RESEND_…
    2.6.9.5.8 jobqWaitTime 0 0 Number of seconds to wait between updates of the job queue
    group statistics. This variable is equivalent to the
    JQ_WAIT_TIME con…
    2.6.9.5.9 psWaitTime 0 0 Number of seconds to wait between updates of the active
    process group statistics. This variable is equivalent to
    the PS_WAIT_TIM…
    2.6.9.5.11 psReqProcFileName 0 0 The fully qualified name of the critical process configuration
    file. The critical process configuration file specifies jobs
    whic…
    2.6.9.5.12 qsysoprSeverity 0 0 The minimum QSYSOPR message severity level which is to be
    forwarded to the SNMP manager. QSYSOPR messages with a severity
    level b…
    2.6.9.5.13 qhstWaitTime 0 0 Number of seconds to wait before rereading the QHST file.
    This variable is equivalent to the QHST_WAIT_TIME configuration
    file pa…
    2.6.9.5.14 trapThrottle 0 0 Number of hundredths of seconds to wait between sending traps.
    This variable may be used as a throttle to prevent traps
    generated…
    2.6.9.5.15 qsysoprMsgFilterFile 0 0 The fully qualified filename for the QSYSOPR message ID filter
    file. The filter can be configured to either forward or discard t…
    2.6.9.5.16 qsysoprMaxMsgAge 0 0 Maximum age of QSYSOPR messages to forward to the SNMP
    manager as qsysoprMsg traps. This value is specified in
    minutes. This va…