A3Com-DLSW-r1-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, Gauge, TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- ******************************************************************* -- * * -- * Textual Conventions * -- * * -- ******************************************************************* -- Represents a single qualified NetBIOS name, which can include -don-t -- care- and -wildcard' characters to represent a number of real NetBIOS -- names. If an individual character position in the qualified name -- contains a -?-, the corresponding character position in a real -- NetBIOS name is a -don-t care'. If the qualified name ends in `*', -- the remainder of a real NetBIOS name is a -don-t care'. `*' is only -- considered a wildcard if it appears at the end of a name. -- NBName ::= OCTET STRING (SIZE (0..16)) -- -- Represents an 802 MAC address represented in non-canonical format. -- That is, the most significant bit will be transmitted first. -- MacAddress ::= OCTET STRING (SIZE (6)) -- -- Denotes a transport service address. For dlswTCPDomain, a TAddress -- is 4 octets long, containing the IP-address in network-byte order. -- TAddress ::= OCTET STRING (SIZE (4)) -- -- The value of dlwsUpTime when the event of interest occurred. -- DlswTimeStamp ::= TimeTicks -- -- Representing the location of an end station related to the managed -- DLSw node. -- EndStationLocation ::= INTEGER { other (1), internal (2), -- local virtual MAC address remote (3), -- DLSw partner local (4) -- locally attached } -- -- Representing the type of DLC of an end station, if applicable. -- DlcType ::= INTEGER { other (1), -- not assigned yet na (2), -- not applicable llc (3), -- 802.2 Logical Link Control sdlc (4) -- SDLC } -- -- The largest size of the INFO field. This is an enumerated value -- in the AIW version of the MIB. -- LFSize ::= INTEGER -- -- Declared for SNMP V2 compatability. -- Truthvalue ::= INTEGER { false (1), true (2) } -- This data type, which has the same semantics as the RowStatus -- textual convention used in SNMPv2, is used to add and -- delete entries from a table. -- The tables in this MIB allow a subset of the functionality -- provided by the RowStatus textual convention. In particular -- row creation is allowed using only the createAndGo method. -- That is, when adding entries to this table, this object -- must be set to createAndGo(4). The instance identifier -- for this object will define the values of the columns -- that make up the index. -- In the same PDU, the appropriate remaining columns -- of that row must be set as well. The agent -- will immediately set the value of this object to -- active(1) if the row is correct. If not, the agent -- will refuse the SET request and return an -- error code. -- To modify an existing entry, it must be removed -- an another entry with the desired changes added. -- To remove an entry, set the value of this object -- to destroy(6). RowStatus ::= INTEGER { -- the following two values are states -- these values can be read or written active(1), notInService(2), -- the following value is a state: -- this value may be read, but not written notReady(3), -- the following three values are actions -- these values can be written, but are never read createAndGo(4), createAndWait(5), destroy(6) } --This data type, which has the same semantics as the RowStatus --textual convention used in SNMPv2, is used to add and --delete entries from a table. --The tables in this MIB allow a subset of the functionality --provided by the RowStatus textual convention. In particular --row creation is allowed using only the createAndGo method. --That is, when adding entries to this table, this object --must be set to createAndGo(4). The instance identifier --for this object will define the values of the columns --that make up the index. --In the same PDU, the appropriate remaining columns --of that row must be set as well. The agent --will immediately set the value of this object to --active(1) if the row is correct. If not, the agent --will refuse the SET request and return an --error code. --To modify an existing entry, it must be removed --an another entry with the desired changes added. --To remove an entry, set the value of this object --to destroy(6). -- -- Declared for SNMP V2 compatability. -- Instancepointer ::= INTEGER -- ******************************************************************* -- * * -- * DLSw GROUPS * -- * * -- ******************************************************************* --a3Com OBJECT IDENTIFIER ::= { 1 3 6 1 4 1 43 } a3Com OBJECT IDENTIFIER ::= { enterprises 43 } brouterMIB OBJECT IDENTIFIER ::= { a3Com 2 } dlswMIB-3Com OBJECT IDENTIFIER ::= { brouterMIB 24 } dlswNode OBJECT IDENTIFIER ::= { dlswMIB-3Com 1 } dlswTConn OBJECT IDENTIFIER ::= { dlswMIB-3Com 2 } dlswInterface OBJECT IDENTIFIER ::= { dlswMIB-3Com 3 } dlswDirectory OBJECT IDENTIFIER ::= { dlswMIB-3Com 4 } dlswCircuit OBJECT IDENTIFIER ::= { dlswMIB-3Com 5 } dlswSdlc OBJECT IDENTIFIER ::= { dlswMIB-3Com 6 } -- ******************************************************************* -- * * -- * NODE GROUP * -- * * -- ******************************************************************* dlswVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "This value identifies the particular version of the DLSw standard supported by this DLSw. The first hexdecimal value represents the DLSw standard Version number of this DLSw, the second hexdecimal value represents the DLSw standard Release number. This information is exchanged in DLSw Capabilities Exchange." ::= { dlswNode 1 } dlswVendorID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) ACCESS read-only STATUS mandatory DESCRIPTION "The value identifies the manufacturer-s IEEE assigned organizationally Unique Identifier (OUI) of this DLSw. This information is exchanged in DLSw Capabilities Exchange." ::= { dlswNode 2 } dlswVersionString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This value identifies the particular version number of this DLSw. The format of the actual version string is vendor-specific. This flows in Capabilities Exchange messages." ::= { dlswNode 3 } dlswStdPacingSupport OBJECT-TYPE SYNTAX INTEGER { none (1), -- does not support DLSw -- Standard adaptive scheme adaptiveRcvWindow (2), -- the receive window size -- varies fixedRcvWindow (3) -- the receive window size -- remains constant } ACCESS read-only STATUS mandatory DESCRIPTION "Adaptive pacing defined in the DLSw Standard allows the receiving end of the DLSw node to control the amount of data that can flow over the DLSw cloud. none (1) means this DLSw node does not support the adaptive pacing scheme as defined in the DLSw Standard, possibly a proprietary pacing scheme is used. adaptiveRcvWindow (2) means this DLSw node supports the DLSw Standard pacing scheme. This DLSw node must be capable to adjust its sending window size as instructed by the partner DLSw and also will adjust its receive window size accordingly to its resource situation. However, implementation may choose not to adjust the receive window size. That is, the only Flow Control Operator will be sent by this node is the Repeat Window Operator. fixedRcvWindow (3) indicates this capability." ::= { dlswNode 4 } dlswStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions: (1) disconnect all circuits through all DLSw partners, (2) disconnect all transport connections to all DLSw partners, (3) disconnect all local DLC connections, and (4) stop processing all DLC connection set-up traffic. Since these are destructive actions, the user should query the circuit and transport connection tables in advance to understand the effect this action will have. Changing the value from inactive to active causes DLSw to come up in its initial state, i.e., transport connection established and ready to bring up circuits." ::= { dlswNode 5 } dlswUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dlswState is in the active state, the time the dlswState entered the active state. It will remain zero, if the dlswState is in the inactive state." ::= { dlswNode 6 } dlswVirtualSegmentLFSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The largest size of the INFO field (LLC and above) that virtual segment can send/receive. It does not include any MAC level (framing) octets. This value will affect the LF size of circuits in creation. LF size of an existing circuit can be found in RIF (Routing Information Field)." ::= { dlswNode 7 } dlswResourceNBExclusivity OBJECT-TYPE SYNTAX Truthvalue ACCESS read-write STATUS mandatory DESCRIPTION "The value of true identifies the NETBIOS Names that are configured in the dlswDirNBTable are the only ones accessible via this DLSw. Changes to this object take effect for runtime Capabilities Exchange messages is implementation choice." ::= { dlswNode 8 } dlswResourceMacExclusivity OBJECT-TYPE SYNTAX Truthvalue ACCESS read-write STATUS mandatory DESCRIPTION "The value of true identifies the MAC addresses that are configured in the dlswDirMacTable are the only ones accessible via this DLSw. Changes to this object take effect for runtime Capabilities Exchange messages is implementation choice." ::= { dlswNode 9 } -- ******************************************************************* -- * * -- * TRANSPORT CONNECTION GROUP * -- * * -- * (Partner DLSw) * -- * * -- ******************************************************************* dlswTConnStat OBJECT IDENTIFIER ::= { dlswTConn 1 } dlswTConnStatActiveConnections OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of transport connections are not in -disconnected- state." ::= { dlswTConnStat 1 } dlswTConnStatCloseIdles OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DLSw connections exited connected state with all circuits disconnected gracefully. That is, the transport connection was brought down, by either this DLSw node or its partner DLSw node, with no active circuits." ::= { dlswTConnStat 2 } dlswTConnStatCloseBusys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DLSw connections exited connected state without all circuits disconnected gracefully. That is, the transport connection was brought down, by either this DLSw node or its partner DLSw node, with some active circuits. For instance, transport connection, e.g, TCP connection, failed." ::= { dlswTConnStat 3 } -- -- Transport Connection Configuration Table (TConnConfig) -- dlswTConnConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DlswTConnConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the transport connections that will be initiated or accepted by this DLSw. Structure of masks allows wildcard definition for a collection of transport connections by a conceptual row. For a specific transport connection, there may be multiple of conceptual rows match the transport address. The -best- match will the one to determine the characteristics of the transport connection." ::= { dlswTConn 2 } dlswTConnConfigEntry OBJECT-TYPE SYNTAX DlswTConnConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each conceptual row defines a collection of transport connections." INDEX { dlswTConnConfigIndex } ::= { dlswTConnConfigTable 1 } DlswTConnConfigEntry ::= SEQUENCE { dlswTConnConfigIndex INTEGER, dlswTConnConfigTDomain OBJECT IDENTIFIER, dlswTConnConfigLocalTAddr TAddress, dlswTConnConfigRemoteTAddr TAddress, dlswTConnConfigLastModifyTime DlswTimeStamp, dlswTConnConfigEntryType INTEGER, dlswTConnConfigGroupDefinition Instancepointer, dlswTConnConfigSetupType INTEGER, dlswTConnConfigSapList OCTET STRING, dlswTConnConfigAdvertiseMacNB Truthvalue, dlswTConnConfigInitCirRecvWndw INTEGER, dlswTConnConfigOpens Counter, dlswTConnConfigRowStatus RowStatus } dlswTConnConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index to the conceptual row of the table. Non-positive numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no corresponding row exists. Index values are assigned by the managed station, and should not be reused but should continue to increase in value until they wrap." ::= { dlswTConnConfigEntry 1 } dlswTConnConfigTDomain OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "The object identifier which indicates the transport domain of this conceptual row." ::= { dlswTConnConfigEntry 2 } dlswTConnConfigLocalTAddr OBJECT-TYPE SYNTAX TAddress ACCESS read-write STATUS mandatory DESCRIPTION "The local transport address for this conceptual row of the transport connection definition." ::= { dlswTConnConfigEntry 3 } dlswTConnConfigRemoteTAddr OBJECT-TYPE SYNTAX TAddress ACCESS read-write STATUS mandatory DESCRIPTION "The remote transport address. Together with the dlswTConnConfigRemoteTAddrMask, the object instance of this conceptual row identifies a collection of the transport connections that will be either initiated by this DLSw or initiated by partner DLSw and accepted by this DLSw." ::= { dlswTConnConfigEntry 4 } dlswTConnConfigLastModifyTime OBJECT-TYPE SYNTAX DlswTimeStamp ACCESS read-write STATUS mandatory DESCRIPTION "The value of dlswUpTime when the value of any object in this conceptual row was last changed. This value may be compared to dlswTConnOperConnectTime to determine whether values in this row are completely valid for a tranport connection created using this row definition." ::= { dlswTConnConfigEntry 5 } dlswTConnConfigEntryType OBJECT-TYPE SYNTAX INTEGER { individual (1), global (2), group (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The object instance signifies the type of entry in the associated conceptual row. The value of -individual- means that the entry applies to a specific partner DLSw node as identified by dlswTConnConfigRemoteTAddr and dlswTConnConfigTDomain. The value of -global- means that the entry applies to all partner DLSw nodes of the TDomain. The value of -group' means that the entry applies to a specific set of DLSw nodes in the TDomain. Any group definitions are enterprise-specific and are pointed to by dlswTConnConfigGroupDefinition. In the cases of -global- and `group', the value in dlswTConnConfigRemoteTAddr may not have any significance." ::= { dlswTConnConfigEntry 6 } dlswTConnConfigGroupDefinition OBJECT-TYPE SYNTAX Instancepointer ACCESS read-write STATUS mandatory DESCRIPTION "For conceptual rows of -individual- and `global' as specified in dlswTConnConfigEntryType, the instance of this object is -0.0-. For conceptual rows of -group-, the instance points to the specific group definition." ::= { dlswTConnConfigEntry 7 } dlswTConnConfigSetupType OBJECT-TYPE SYNTAX INTEGER { other (1), activePersistent (2), activeOnDemand (3), passive (4), excluded (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value of activePersistent, activeOnDemand and passive means this DLSw will accept any transport connections, initiated by partner DLSw nodes, which are defined by this conceptual row. The value of activePersistent means this DLSw will also initiate the transport connections of this conceptual row and retry periodically if necessary. The value of activeOnDemand means this DLSw will initiate a transport connection of this conceptual row, if there is a directory cache hits. The value of other is implementation specific. The value of exclude means that the specified node is not allowed to be a partner to this DLSw node. To take a certain conceptual row definition out of service, a value of notInService for dlswTConnConfigRowStatus should be used." DEFVAL { passive } ::= { dlswTConnConfigEntry 8 } dlswTConnConfigSapList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) ACCESS read-write STATUS mandatory DESCRIPTION "The SAP list indicates which SAPs are advertised to the transport connection defined by this conceptual row. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in dlswIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up to the implementation exactly when to start the run-time capabilities exchange." ::= { dlswTConnConfigEntry 9 } dlswTConnConfigAdvertiseMacNB OBJECT-TYPE SYNTAX Truthvalue ACCESS read-write STATUS mandatory DESCRIPTION "The value of true indicates that defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time capabilities exchange messages." DEFVAL { true } ::= { dlswTConnConfigEntry 10 } dlswTConnConfigInitCirRecvWndw OBJECT-TYPE SYNTAX INTEGER (0..65535) -- UNITS "SSP messages" ACCESS read-write STATUS mandatory DESCRIPTION "The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The managed node sends this value as its initial receive pacing window in its initial capabilities exchange message. Changing this value does not affect the initial circuit receive pacing window size of currently active transport connections. If the standard window pacing scheme is not supported, the value is zero. A larger receive window value may be appropriate for partners that are reachable only via physical paths that have longer network delays." DEFVAL { 1 } ::= { dlswTConnConfigEntry 11 } dlswTConnConfigOpens OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times transport connections entered connected state according to the definition of this conceptual row." ::= { dlswTConnConfigEntry 12 } dlswTConnConfigRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by a Management Station to create or delete the row entry in the dlswTConnConfigTable following the RowStatus textual convention. The value of notInService will be used to take a conceptual row definition out of use." ::= { dlswTConnConfigEntry 13 } -- -- Transport Connection Operation Table (TConnOper) -- -- -- (1) At most one transport connection can be connected between -- this DLSw and one of its DLSw partners at a given time. -- (2) Multiple transport types are supported. -- (3) Since the entries may be reused, dlswTConnOperEntryTime -- needs to be consulted for the possibility of counter reset. -- dlswTConnOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DlswTConnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of transport connections. It is optional but desirable for an implementation to keep an entry for some period of time after the transport connection is disconnected. This allows a network management station to capture additional useful information about the connection, in particular, statistical information and the cause of the disconnection." ::= { dlswTConn 3 } dlswTConnOperEntry OBJECT-TYPE SYNTAX DlswTConnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr } ::= { dlswTConnOperTable 1 } DlswTConnOperEntry ::= SEQUENCE { dlswTConnOperTDomain OBJECT IDENTIFIER, dlswTConnOperLocalTAddr TAddress, dlswTConnOperRemoteTAddr TAddress, dlswTConnOperEntryTime DlswTimeStamp, dlswTConnOperConnectTime DlswTimeStamp, dlswTConnOperState INTEGER, dlswTConnOperConfigIndex INTEGER, dlswTConnOperFlowCntlMode INTEGER, dlswTConnOperPartnerVersion OCTET STRING, dlswTConnOperPartnerVendorID OCTET STRING, dlswTConnOperPartnerVersionStr DisplayString, dlswTConnOperPartnerInitPacingWndw INTEGER, dlswTConnOperPartnerSapList OCTET STRING, dlswTConnOperPartnerNBExcl Truthvalue, dlswTConnOperPartnerMacExcl Truthvalue, dlswTConnOperPartnerNBInfo INTEGER, dlswTConnOperPartnerMacInfo INTEGER, dlswTConnOperDiscTime DlswTimeStamp, dlswTConnOperDiscReason INTEGER, dlswTConnOperDiscActiveCir INTEGER, dlswTConnOperInDataPkts Counter, dlswTConnOperOutDataPkts Counter, dlswTConnOperInDataOctets Counter, dlswTConnOperOutDataOctets Counter, dlswTConnOperInCntlPkts Counter, dlswTConnOperOutCntlPkts Counter, dlswTConnOperCURexSents Counter, dlswTConnOperICRexRcvds Counter, dlswTConnOperCURexRcvds Counter, dlswTConnOperICRexSents Counter, dlswTConnOperNQexSents Counter, dlswTConnOperNRexRcvds Counter, dlswTConnOperNQexRcvds Counter, dlswTConnOperNRexSents Counter, dlswTConnOperCirCreates Counter, dlswTConnOperCircuits Gauge } dlswTConnOperTDomain OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The object identifier indicates the transport domain of this transport connection." ::= { dlswTConnOperEntry 1 } dlswTConnOperLocalTAddr OBJECT-TYPE SYNTAX TAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local transport address for this transport connection. This value could be different from dlswTConnConfigLocalAddr, if the value of the latter were changed after this transport connection was established." ::= { dlswTConnOperEntry 2 } dlswTConnOperRemoteTAddr OBJECT-TYPE SYNTAX TAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote transport address of this transport connection." ::= { dlswTConnOperEntry 3 } dlswTConnOperEntryTime OBJECT-TYPE SYNTAX DlswTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswUpTime when this transport connection conceptual row was created." ::= { dlswTConnOperEntry 4 } -- ................................................................... -- DLSw Transport Connection Operational Objects -- ................................................................... dlswTConnOperConnectTime OBJECT-TYPE SYNTAX DlswTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswUpTime when this transport connection last entered the -connected- state. A value of zero means this transport connection has never been established." ::= { dlswTConnOperEntry 5 } dlswTConnOperState OBJECT-TYPE SYNTAX INTEGER { connecting (1), initCapExchange (2), connected (3), quiescing (4), disconnecting (5), disconnected (6) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this transport connection. The transport connection enters -connecting- state when DLSw makes a connection request to the transport layer. Once initial Capabilities Exchange is sent, the transport connection enters enters -initCapExchange- state. When partner capabilities have been determined and the transport connection is ready for sending CanUReach (CUR) messages, it moves to the -connected- state. When DLSw is in the process of bringing down the connection, it is in the -disconnecting- state. When the transport layer indicates one of its connections is disconnected, the transport connection moves to the -disconnected- state. Whereas all of the values will be returned in response to a management protocol retrieval operation, only two values may be specified in a management protocol set operation, -quiescing- and -disconnecting-. Changing the value to -quiescing- prevents new circuits from being established, and will cause a transport disconnect when the last circuit on the connection goes away. Changing the value to -disconnecting- will force off all circuits immediately and bring the connection to -disconnected- state." ::= { dlswTConnOperEntry 6 } dlswTConnOperConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this dlswTConnOperEntry. A management station can therefore normally examine both configured and operational information for this transport connection. This value is zero if the corresponding dlswTConnConfigEntry was deleted after the creation of this dlswTConnOperEntry. If some fields in the former were changed but the conceptual row was not deleted, some configuration information may not be valid for this operational transport connection. A network management application can compare dlswTConnOperConnectTime and dlswTConnConfigLastModifyTime to determine if this condition exists." ::= { dlswTConnOperEntry 7 } -- ................................................................... -- Transport Connection Characteristics -- ................................................................... dlswTConnOperFlowCntlMode OBJECT-TYPE SYNTAX INTEGER { undetermined (1), pacing (2), -- DLSw standard flow control other (3) -- non-DLSw standard flow control } ACCESS read-only STATUS mandatory DESCRIPTION "The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new tranport connection (i.e., after CapEx is sent but before Capex or other SSP control messages have been received). Pacing (2) indicates that the standard RFC 1795 pacing mechanism is in use. Other (3) may be either the RFC 1434+ xBusy mechanism operating to a back-level DLSw, or a vendor-specific flow control method. Whether it is xBusy or not can be inferred from dlswTConnOperPartnerVersion." ::= { dlswTConnOperEntry 8 } dlswTConnOperPartnerVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "This value identifies which version (first octet) and release (second octect) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a dlswTConnOperState of -connected- but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 9 } dlswTConnOperPartnerVendorID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 10 } dlswTConnOperPartnerVersionStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..253)) ACCESS read-only STATUS mandatory DESCRIPTION "This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, if one is never received, or if one is received but it does not contain a version string. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 11 } dlswTConnOperPartnerInitPacingWndw OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner sends on each circuit. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A value of zero is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 12 } dlswTConnOperPartnerSapList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for dlswTConnConfigSapList. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 13 } dlswTConnOperPartnerNBExcl OBJECT-TYPE SYNTAX Truthvalue ACCESS read-only STATUS mandatory DESCRIPTION "The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIOS names reachable by that partner. -False- indicates that other NetBIOS names may be reachable. -False- should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a NB Name Exclusivity CV. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 14 } dlswTConnOperPartnerMacExcl OBJECT-TYPE SYNTAX Truthvalue ACCESS read-only STATUS mandatory DESCRIPTION "The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC addresses reachable by that partner. -False- indicates that other MAC addresses may be reachable. -False- should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a MAC Address Exclusivity CV. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 15 } dlswTConnOperPartnerNBInfo OBJECT-TYPE SYNTAX INTEGER { none (1), -- none is kept partial (2), -- partial list is kept complete (3), -- complete list is kept notApplicable (4) } ACCESS read-only STATUS mandatory DESCRIPTION "It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in dlswDirNBTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 16 } dlswTConnOperPartnerMacInfo OBJECT-TYPE SYNTAX INTEGER { none (1), -- none is kept partial (2), -- partial list is kept complete (3), -- complete list is kept notApplicable (4) } ACCESS read-only STATUS mandatory DESCRIPTION "It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in dlswDirMACTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the -disconnected- state, this value should remain unchanged." ::= { dlswTConnOperEntry 17 } -- ................................................................... -- Information about the last disconnect of this transport connection. -- These objects make sense only for implementations that keep -- transport connection information around after disconnection. -- ................................................................... dlswTConnOperDiscTime OBJECT-TYPE SYNTAX DlswTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswUpTime when dlswTConnOperState last entered -disconnected- state." ::= { dlswTConnOperEntry 18 } dlswTConnOperDiscReason OBJECT-TYPE SYNTAX INTEGER { other (1), capExFailed (2), transportLayerDisc (3), operatorCommand (4), lastCircuitDiscd (5), protocolError (6) } ACCESS read-only STATUS mandatory DESCRIPTION "This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter the disconnected state." ::= { dlswTConnOperEntry 19 } dlswTConnOperDiscActiveCir OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport connection has never been connected." ::= { dlswTConnOperEntry 20 } -- ................................................................... -- Transport Connection Statistics -- (1) Traffic counts -- ................................................................... dlswTConnOperInDataPkts OBJECT-TYPE SYNTAX Counter -- UNITS "SSP messages" ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection." ::= { dlswTConnOperEntry 21 } dlswTConnOperOutDataPkts OBJECT-TYPE SYNTAX Counter -- UNITS "SSP messages" ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection." ::= { dlswTConnOperEntry 22 } dlswTConnOperInDataOctets OBJECT-TYPE SYNTAX Counter -- UNITS "octets" ACCESS read-only STATUS mandatory DESCRIPTION "The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP message header." ::= { dlswTConnOperEntry 23 } dlswTConnOperOutDataOctets OBJECT-TYPE SYNTAX Counter -- UNITS "octets" ACCESS read-only STATUS mandatory DESCRIPTION "The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message is counted starting with the first octet following the SSP message header." ::= { dlswTConnOperEntry 24 } dlswTConnOperInCntlPkts OBJECT-TYPE SYNTAX Counter -- UNITS "SSP messages" ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME." ::= { dlswTConnOperEntry 25 } dlswTConnOperOutCntlPkts OBJECT-TYPE SYNTAX Counter -- UNITS "SSP messages" ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME." ::= { dlswTConnOperEntry 26 } -- ................................................................... -- (2) Directory activities (Explorer messages) -- ................................................................... dlswTConnOperCURexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CanUReach_ex messages sent on this transport connection." ::= { dlswTConnOperEntry 27 } dlswTConnOperICRexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICanReach_ex messages received on this transport connection." ::= { dlswTConnOperEntry 28 } dlswTConnOperCURexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CanUReach_ex messages received on this transport connection." ::= { dlswTConnOperEntry 29 } dlswTConnOperICRexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICanReach_ex messages sent on this transport connection." ::= { dlswTConnOperEntry 30 } dlswTConnOperNQexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection." ::= { dlswTConnOperEntry 31 } dlswTConnOperNRexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection." ::= { dlswTConnOperEntry 32 } dlswTConnOperNQexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS_NQ_ex messages received on this transport connection." ::= { dlswTConnOperEntry 33 } dlswTConnOperNRexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS_NR_ex messages sent on this transport connection." ::= { dlswTConnOperEntry 34 } -- ................................................................... -- (3) Circuit activities on each transport connection -- ................................................................... dlswTConnOperCirCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that circuits entered -circuit_established- state (not counting transitions from -circuit_restart-)." ::= { dlswTConnOperEntry 35 } dlswTConnOperCircuits OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently active circuits on this transport connection, where -active- means not in -disconnected- state." ::= { dlswTConnOperEntry 36 } -- ******************************************************************* -- * * -- * DIRECTORY GROUP * -- * * -- ******************************************************************* -- Directory Related Statistical Objects dlswDirStat OBJECT IDENTIFIER ::= { dlswDirectory 1 } dlswDirMacEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current total number of entries in the dlswDirMacTable." ::= { dlswDirStat 1 } dlswDirNBEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current total number of entries in the dlswDirNBTable." ::= { dlswDirStat 4 } -- Directory Cache dlswDirCache OBJECT IDENTIFIER ::= { dlswDirectory 2 } dlswDirMacTable OBJECT-TYPE SYNTAX SEQUENCE OF DlswDirMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains locations of MAC addresses. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches." ::= { dlswDirCache 1 } dlswDirMacEntry OBJECT-TYPE SYNTAX DlswDirMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indexed by dlswDirMacIndex." INDEX { dlswDirMacIndex } ::= { dlswDirMacTable 1 } DlswDirMacEntry ::= SEQUENCE { dlswDirMacIndex INTEGER, dlswDirMacMac MacAddress, dlswDirMacMask MacAddress, dlswDirMacEntryType INTEGER, dlswDirMacLocationType INTEGER, dlswDirMacLocation Instancepointer, dlswDirMacStatus INTEGER, dlswDirMacLFSize LFSize, dlswDirMacRowStatus RowStatus } dlswDirMacIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies a conceptual row of this table." ::= { dlswDirMacEntry 1 } dlswDirMacMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address, together with the dlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes." ::= { dlswDirMacEntry 2 } dlswDirMacMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address mask, together with the dlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes." DEFVAL { 'FFFFFFFFFFFF'H } ::= { dlswDirMacEntry 3 } dlswDirMacEntryType OBJECT-TYPE SYNTAX INTEGER { other (1), userConfiguredPublic (2), userConfiguredPrivate (3), partnerCapExMsg (4), dynamic (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line or equivalent methods; (2) learned from the partner DLSw Capabilities Exchange messages; and (3) dynamic, e.g., learned from ICanReach messages, or LAN explorer frames. Since only individual MAC addresses can be dynamically learned, dynamic entries will all have a mask of all FFs. The public versus private distinction for user- configured resources applies only to local resources (UC remote resources are private), and indicates whether that resource should be advertised in capabilities exchange messages sent by this node." DEFVAL { userConfiguredPublic } ::= { dlswDirMacEntry 4 } dlswDirMacLocationType OBJECT-TYPE SYNTAX INTEGER { other (1), local (2), remote (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a partner DLSw node (or a set of partner DLSw nodes)." DEFVAL { local } ::= { dlswDirMacEntry 5 } dlswDirMacLocation OBJECT-TYPE SYNTAX Instancepointer ACCESS read-only STATUS mandatory DESCRIPTION "Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the MAC address (or the collection of MAC addresses.)" ::= { dlswDirMacEntry 6 } dlswDirMacStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), reachable (2), notReachable (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search)." DEFVAL { unknown } ::= { dlswDirMacEntry 7 } dlswDirMacLFSize OBJECT-TYPE SYNTAX LFSize ACCESS read-only STATUS mandatory DESCRIPTION "The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path." ::= { dlswDirMacEntry 8 } dlswDirMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This object is used by a Management Station to create or delete the row entry in the dlswDirMacTable following the RowStatus textual convention." ::= { dlswDirMacEntry 9 } -- ................................................................... -- Directory for NetBIOS Names -- ................................................................... dlswDirNBTable OBJECT-TYPE SYNTAX SEQUENCE OF DlswDirNBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains locations of NetBIOS names. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches." ::= { dlswDirCache 2 } dlswDirNBEntry OBJECT-TYPE SYNTAX DlswDirNBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indexed by dlswDirNBIndex." INDEX { dlswDirNBIndex } ::= { dlswDirNBTable 1 } DlswDirNBEntry ::= SEQUENCE { dlswDirNBIndex INTEGER, dlswDirNBName NBName, dlswDirNBNameType INTEGER, dlswDirNBEntryType INTEGER, dlswDirNBLocationType INTEGER, dlswDirNBLocation Instancepointer, dlswDirNBStatus INTEGER, dlswDirNBLFSize LFSize, dlswDirNBRowStatus RowStatus } dlswDirNBIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies a conceptual row of this table." ::= { dlswDirNBEntry 1 } dlswDirNBName OBJECT-TYPE SYNTAX NBName ACCESS read-only STATUS mandatory DESCRIPTION "The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partner DLSw nodes." ::= { dlswDirNBEntry 2 } dlswDirNBNameType OBJECT-TYPE SYNTAX INTEGER { unknown (1), individual (2), group (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether dlswDirNBName represents an (or a set of) individual or group NetBIOS name(s)." DEFVAL { unknown } ::= { dlswDirNBEntry 3 } dlswDirNBEntryType OBJECT-TYPE SYNTAX INTEGER { other (1), userConfiguredPublic (2), userConfiguredPrivate (3), partnerCapExMsg (4), dynamic (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line, or equivalent methods; (2) learned from the partner DLSw Capabilities Exchange messages; and (3) dynamic, e.g., learned from ICanReach messages, or test frames. Since only actual NetBIOS names can be dynamically learned, dynamic entries will not contain any char or wildcard characters. The public versus private distinction for user- configured resources applies only to local resources (UC remote resources are private), and indicates whether that resource should be advertised in capabilities exchange messages sent by this node." DEFVAL { userConfiguredPublic } ::= { dlswDirNBEntry 4 } dlswDirNBLocationType OBJECT-TYPE SYNTAX INTEGER { other (1), local (2), remote (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a a partner DLSw node (or a set of partner DLSw nodes)." DEFVAL { local } ::= { dlswDirNBEntry 5 } dlswDirNBLocation OBJECT-TYPE SYNTAX Instancepointer ACCESS read-only STATUS mandatory DESCRIPTION "Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the NetBIOS name or the set of NetBIOS names." ::= { dlswDirNBEntry 6 } dlswDirNBStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), reachable (2), notReachable (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search)." DEFVAL { unknown } ::= { dlswDirNBEntry 7 } dlswDirNBLFSize OBJECT-TYPE SYNTAX LFSize ACCESS read-only STATUS mandatory DESCRIPTION "The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path." ::= { dlswDirNBEntry 8 } dlswDirNBRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This object is used by a Management Station to create or delete the row entry in the dlswDirNBTable following the RowStatus textual convention." ::= { dlswDirNBEntry 9 } -- ******************************************************************* -- * * -- * CIRCUIT GROUP * -- * * -- ******************************************************************* -- -- A circuit is the end-to-end association of two DLS entities -- through one or two DLSw nodes. It is the concatenation of -- two "data links", optionally with an intervening transport -- connection. Origin of the circuit is the end station which -- initiates the circuit. Target of the circuit is the end -- station which receives the initiation. -- dlswCircuitStat OBJECT IDENTIFIER ::= { dlswCircuit 1 } dlswActiveCircuits OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in dlswCircuitTable which are not in the disconnected state." ::= { dlswCircuitStat 1 } dlswCircuitCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of entries ever added to dlswCircuitTable, or reactivated upon exiting -disconnected- state." ::= { dlswCircuitStat 2 } -- -- Circuit Table (dlswCircuit) -- -- This table is the DLSw entity-s view of circuits. There will be -- a conceptual row in the table associated with each data link. -- -- The chart below lists the various possible combinations of -- origin and target MAC locations and the number of entries in -- this Circuit Table: -- -- number of | Origin End Station Location -- entries in the |-------------------------------------- -- Circuit Table | internal local remote -- Target | internal | NA 2 1 -- End | local | 2 2 1 -- Station | remote | 1 1 NA -- Location | | -- -- NA: Not applicable -- -- Note: -- (a) IfIndex and RouteInfo are applied only if location is local. -- (b) TDomain and TAddr are applied only if location is remote. -- -- Most of statistics related to circuits can be collected -- from LLC-2 Link Station Table. -- dlswCircuitTable OBJECT-TYPE SYNTAX SEQUENCE OF DlswCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row associated with each data link. Thus, for circuits without an intervening transport connection, there are two conceptual rows for each circuit. The table consists of the circuits being established, established, and as an implementation option, circuits that have been disconnected. For circuits carried over transport connections, an entry is created after the CUR_cs was sent or received. For circuits between two locally attached devices, or internal virtual MAC addresses, an entry is created when the equivalent of CUR_cs sent/received status is reached. End station 1 (S1) and End station 2 (S2) are used to represent the two end stations of the circuit. S1 is always an end station which is locally attached. S2 may be locally attached or remote. If it is locally attached, the circuit will be represented by two rows indexed by (A, B) and (B, A) where A & B are the relevant MACs/SAPs. The table may be used to store the causes of disconnection of circuits. It is recommended that the oldest disconnected circuit entry be removed from this table when the memory space of disconnected circuits is needed." ::= { dlswCircuit 2 } dlswCircuitEntry OBJECT-TYPE SYNTAX DlswCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dlswCircuitS1Mac, dlswCircuitS1Sap, dlswCircuitS2Mac, dlswCircuitS2Sap } ::= { dlswCircuitTable 1 } DlswCircuitEntry ::= SEQUENCE { dlswCircuitS1Mac MacAddress, dlswCircuitS1Sap OCTET STRING, dlswCircuitS1IfIndex INTEGER, dlswCircuitS1DlcType DlcType, dlswCircuitS1RouteInfo OCTET STRING, dlswCircuitS1CircuitId OCTET STRING, dlswCircuitS1Dlc Instancepointer, dlswCircuitS2Mac MacAddress, dlswCircuitS2Sap OCTET STRING, dlswCircuitS2Location EndStationLocation, dlswCircuitS2TDomain OBJECT IDENTIFIER, dlswCircuitS2TAddress TAddress, dlswCircuitS2CircuitId OCTET STRING, dlswCircuitOrigin INTEGER, dlswCircuitEntryTime DlswTimeStamp, dlswCircuitStateTime DlswTimeStamp, dlswCircuitState INTEGER, dlswCircuitPriority INTEGER, dlswCircuitFCSendGrantedUnits INTEGER, dlswCircuitFCSendCurrentWndw INTEGER, dlswCircuitFCRecvGrantedUnits INTEGER, dlswCircuitFCRecvCurrentWndw INTEGER, dlswCircuitFCLargestRecvGranted Gauge, dlswCircuitFCLargestSendGranted Gauge, dlswCircuitFCHalveWndwSents Counter, dlswCircuitFCResetOpSents Counter, dlswCircuitFCHalveWndwRcvds Counter, dlswCircuitFCResetOpRcvds Counter, dlswCircuitDiscReasonLocal INTEGER, dlswCircuitDiscReasonRemote INTEGER, dlswCircuitDiscReasonRemoteData OCTET STRING } -- ................................................................... -- Information related to the End Station 1 (S1). -- ................................................................... dlswCircuitS1Mac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC Address of End Station 1 (S1) used for this circuit." ::= { dlswCircuitEntry 1 } dlswCircuitS1Sap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The SAP at End Station 1 (S1) used for this circuit." ::= { dlswCircuitEntry 2 } dlswCircuitS1IfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The IfEntry index of the local interface through which S1 can be reached." ::= { dlswCircuitEntry 3 } dlswCircuitS1DlcType OBJECT-TYPE SYNTAX DlcType ACCESS read-only STATUS mandatory DESCRIPTION "The DLC protocol in use between the DLSw node and S1." ::= { dlswCircuitEntry 4 } dlswCircuitS1RouteInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise the value will be an OCTET STRING of zero length." ::= { dlswCircuitEntry 5 } dlswCircuitS1CircuitId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length." ::= { dlswCircuitEntry 6 } dlswCircuitS1Dlc OBJECT-TYPE SYNTAX Instancepointer ACCESS read-only STATUS mandatory DESCRIPTION "Points to a conceptual row of the underlying DLC MIB, which could either be the standard SDLC or LLC MIBs, or an enterprise-specific DLC MIB." ::= { dlswCircuitEntry 7 } -- ................................................................... -- Information related to the End Station 2 (S2). -- ................................................................... dlswCircuitS2Mac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC Address of End Station 2 (S2) used for this circuit." ::= { dlswCircuitEntry 8 } dlswCircuitS2Sap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The SAP at End Station 2 (S2) used for this circuit." ::= { dlswCircuitEntry 9 } dlswCircuitS2Location OBJECT-TYPE SYNTAX EndStationLocation ACCESS read-only STATUS mandatory DESCRIPTION "The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively." ::= { dlswCircuitEntry 10 } dlswCircuitS2TDomain OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0.0." ::= { dlswCircuitEntry 11 } dlswCircuitS2TAddress OBJECT-TYPE SYNTAX TAddress ACCESS read-only STATUS mandatory DESCRIPTION "If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length." ::= { dlswCircuitEntry 12 } dlswCircuitS2CircuitId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length." ::= { dlswCircuitEntry 13 } dlswCircuitOrigin OBJECT-TYPE SYNTAX INTEGER { s1 (1), s2 (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies which of the two end stations initiated the establishment of this circuit." ::= { dlswCircuitEntry 14 } -- ................................................................... -- Operational information related to this circuit. -- ................................................................... dlswCircuitEntryTime OBJECT-TYPE SYNTAX DlswTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswUpTime when this circuit table conceptual row was created." ::= { dlswCircuitEntry 15 } dlswCircuitStateTime OBJECT-TYPE SYNTAX DlswTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswUpTime when this circuit entered the current state." ::= { dlswCircuitEntry 16 } dlswCircuitState OBJECT-TYPE SYNTAX INTEGER { disconnected (1), circuitStart (2), resolvePending (3), circuitPending (4), circuitEstablished (5), connectPending (6), contactPending (7), connected (8), disconnectPending (9), haltPending (10), haltPendingNoack (11), circuitRestart (12), restartPending (13) } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of this circuit. The implementation may choose to keep entries for some period of time after circuit disconnect, so the network management station can gather the time and cause of disconnection. While all of the specified values may be returned from a GET operation, the only SETable value is -disconnectPending-. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was -connected-) to bring the circuit down to the -disconnected- state. Both the partner DLSw and local end station(s) should be notified as appropriate. This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function." ::= { dlswCircuitEntry 17 } dlswCircuitPriority OBJECT-TYPE SYNTAX INTEGER { unsupported (0), low (1), medium (2), high (3), highest (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw node does not support DLSw circuit priority, the value -unsupported- should be returned." ::= { dlswCircuitEntry 18 } -- ................................................................... -- Pacing Objects: -- These objects are applicable if DLSw is using the SSP circuit -- pacing protocol to control the flow between the two data links -- in this circuit. -- ................................................................... dlswCircuitFCSendGrantedUnits OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 19 } dlswCircuitFCSendCurrentWndw OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control indication with the bits specifying -repeat window-. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 20 } dlswCircuitFCRecvGrantedUnits OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 21 } dlswCircuitFCRecvCurrentWndw OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to send a flow control indication with the bits specifying -repeat window-. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 22 } dlswCircuitFCLargestRecvGranted OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any time, but the largest window size as represented by FCIND operator bits. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 23 } dlswCircuitFCLargestSendGranted OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 24 } dlswCircuitFCHalveWndwSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 25 } dlswCircuitFCResetOpSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 26 } dlswCircuitFCHalveWndwRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 27 } dlswCircuitFCResetOpRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol." ::= { dlswCircuitEntry 28 } -- ................................................................... -- Information about the circuit disconnection -- ................................................................... dlswCircuitDiscReasonLocal OBJECT-TYPE SYNTAX INTEGER { endStationDiscRcvd (1), endStationDlcError (2), protocolError (3), operatorCommand (4), haltDlRcvd (5), haltDlNoAckRcvd (6), transportConnClosed (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the implementation keeps circuit table entries around for some period after circuit disconnect." ::= { dlswCircuitEntry 29 } dlswCircuitDiscReasonRemote OBJECT-TYPE SYNTAX INTEGER { unknown (0), endStationDiscRcvd (1), endStationDlcError (2), protocolError (3), operatorCommand (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a reason code in these messages, or the DLSw implementation does not report receiving one, the value -unknown- is returned. This object is present only if the implementation keeps circuit table entries around for some period after circuit disconnect." ::= { dlswCircuitEntry 30 } dlswCircuitDiscReasonRemoteData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the partner does not send this data in these messages, or the DLSw implementation does not report receiving it, a string of zero length is returned. This object is present only if the implementation keeps circuit table entries around for some period after circuit disconnect." ::= { dlswCircuitEntry 31 } -- ******************************************************************* -- * * -- * PROPRIETARY EXTENSIONS * -- * * -- ******************************************************************* -- dlswCircuitAdjNodeType OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE (2)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "SNA Adjacent Node Type???" -- ::= { dlswCircuitEntry 40 } -- dlswCircuitAdjCpName OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE (8)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Name of SNA Adjacent Control Point." -- ::= { dlswCircuitEntry 41 } -- ******************************************************************* -- * * -- * DLSW TRAPS * -- * * -- ******************************************************************* -- dlswTrapControl OBJECT IDENTIFIER ::= { dlswNode 10} -- ................................................................... -- Trap Generation Control -- ................................................................... dlswTrapCntlTConn OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the DLSw is permitted to emit transport connection up and down traps. With the value of `enabled' the DLSw will emit traps when connections enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when connections enter of `connected' and `disconnected' states. With the value of `partial' the DLSw will only emits transport connection down traps when the connection is closed with busy. The changes take effect immediately." ::= { dlswTrapControl 3 } dlswTrapCntlCircuit OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the DLSw is permitted to generate circuit up and down traps. With the value of `enabled' the DLSw will emit traps when circuits enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when circuits enter of `connected' and `disconnected' states. With the value of `partial' the DLSw will emit traps only for those circuits that are initiated by this DLSw, e.g., originating the CUR_CS message. The changes take effect immediately." ::= { dlswTrapControl 4 } -- ................................................................... -- Trap Definitions -- ................................................................... -- ******************************************************************* dlswTraps OBJECT IDENTIFIER ::= { dlswMIB-3Com 7 } dlswTrapTConnUp TRAP-TYPE ENTERPRISE dlswMIB-3Com VARIABLES { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr } DESCRIPTION "This trap is sent each time a transport connection enters `connected' state." ::= 1 dlswTrapTConnDown TRAP-TYPE ENTERPRISE dlswMIB-3Com VARIABLES { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr } DESCRIPTION "This trap is sent each time a transport connection enters `disconnected' state." ::= 2 dlswTrapCircuitUp TRAP-TYPE ENTERPRISE dlswMIB-3Com VARIABLES { dlswCircuitS1Mac, dlswCircuitS1Sap, dlswCircuitS2Mac, dlswCircuitS2Sap } DESCRIPTION "This trap is sent each time a circuit enters `connected' state." ::= 3 dlswTrapCircuitDown TRAP-TYPE ENTERPRISE dlswMIB-3Com VARIABLES { dlswCircuitS1Mac, dlswCircuitS1Sap, dlswCircuitS2Mac, dlswCircuitS2Sap } DESCRIPTION "This trap is sent each time a circuit enters `disconnected' state." ::= 4 -- -- -- END