-- Ascend mibdba MIB -- -- Ascend Communications, Inc -- 1275 Harbor Bay Pkwy -- Alameda, CA 94502 -- +1 510 769 6001 -- info@ascend.com -- -- Copyright (c) 1993-1999 Ascend Communications, Inc. -- All rights reserved. -- -- Do not edit this file directly. -- It is generated automatically by mibgen for use with -- TAOS version 10.0.1 or newer. -- ASCEND-MIBDBA-MIB DEFINITIONS ::= BEGIN IMPORTS configuration FROM ASCEND-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- If any of the MIB compilers have problems with the DisplayString -- or PhysAddress, uncomment the next two lines. DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING mibdBAProfile OBJECT IDENTIFIER ::= { configuration 71} -- The mibdBAProfile table -- -- This table contains parameters for the mibdBAProfile profile -- mibdBAProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF MibdBAProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibdBAProfile profile entries." ::= { mibdBAProfile 1 } mibdBAProfileEntry OBJECT-TYPE SYNTAX MibdBAProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibdBAProfile entry containing objects that maps to the parameters of mibdBAProfile profile." INDEX { dBAProfile-Shelf-o, dBAProfile-Slot-o, dBAProfile-Item-o, dBAProfile-LogicalItem-o } ::= { mibdBAProfileTable 1 } MibdBAProfileEntry ::= SEQUENCE { dBAProfile-Shelf-o INTEGER, dBAProfile-Slot-o INTEGER, dBAProfile-Item-o INTEGER, dBAProfile-LogicalItem-o INTEGER, dBAProfile-LogicalAddress-PhysicalAddress-Shelf INTEGER, dBAProfile-LogicalAddress-PhysicalAddress-Slot INTEGER, dBAProfile-LogicalAddress-PhysicalAddress-ItemNumber INTEGER, dBAProfile-LogicalAddress-LogicalItem INTEGER, dBAProfile-Name DisplayString, dBAProfile-PhoneNumber DisplayString, dBAProfile-BillingNumber DisplayString, dBAProfile-oCallType INTEGER, dBAProfile-oCallMgm INTEGER, dBAProfile-oDataSvc INTEGER, dBAProfile-Force56 INTEGER, dBAProfile-BaseChannelCount INTEGER, dBAProfile-IncrementChannelCount INTEGER, dBAProfile-DecrementChannelCount INTEGER, dBAProfile-oFailAction INTEGER, dBAProfile-BitInversionRequired INTEGER, dBAProfile-Ft1Caller INTEGER, dBAProfile-Ft1Timeout INTEGER, dBAProfile-CallByCallID INTEGER, dBAProfile-CalledNumberType INTEGER, dBAProfile-UnknownPlanUnknown INTEGER, dBAProfile-LocalPlanIsdn INTEGER, dBAProfile-TransitNumber DisplayString, dBAProfile-oAutoBERT INTEGER, dBAProfile-TimedCall INTEGER, dBAProfile-FlagIdle INTEGER, dBAProfile-oDynAlg INTEGER, dBAProfile-SecondsOfHistory INTEGER, dBAProfile-AddSecondsOfPersistence INTEGER, dBAProfile-RemoveSecondsOfPersistence INTEGER, dBAProfile-NailedUpGroup INTEGER, dBAProfile-CallPassword DisplayString, dBAProfile-DbaPriNumberingPlanId INTEGER, dBAProfile-Action-o INTEGER } dBAProfile-Shelf-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfileEntry 1 } dBAProfile-Slot-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfileEntry 2 } dBAProfile-Item-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfileEntry 3 } dBAProfile-LogicalItem-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfileEntry 4 } dBAProfile-LogicalAddress-PhysicalAddress-Shelf OBJECT-TYPE SYNTAX INTEGER { anyShelf (1), shelf1 (2), shelf2 (3), shelf3 (4), shelf4 (5), shelf5 (6), shelf6 (7), shelf7 (8), shelf8 (9), shelf9 (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the shelf that the addressed physical device resides on." ::= { mibdBAProfileEntry 5 } dBAProfile-LogicalAddress-PhysicalAddress-Slot OBJECT-TYPE SYNTAX INTEGER { anySlot (1), slot1 (2), slot2 (3), slot3 (4), slot4 (5), slot5 (6), slot6 (7), slot7 (8), slot8 (9), slot9 (10), slot10 (11), slot11 (12), slot12 (13), slot13 (14), slot14 (15), slot15 (16), slot16 (17), slot17 (18), slot18 (19), slot19 (20), slot20 (21), slot21 (22), slot22 (23), slot23 (24), slot24 (25), slot25 (26), slot26 (27), slot27 (28), slot28 (29), slot29 (30), slot30 (31), slot31 (32), slot32 (33), slot33 (34), slot34 (35), slot35 (36), slot36 (37), slot37 (38), slot38 (39), slot39 (40), slot40 (41), aLim (55), bLim (56), cLim (57), dLim (58), leftController (49), rightController (50), controller (42), firstControlModule (53), secondControlModule (54), trunkModule1 (45), trunkModule2 (46), controlModule (51), slotPrimary (59) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibdBAProfileEntry 6 } dBAProfile-LogicalAddress-PhysicalAddress-ItemNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A number that specifies an addressable entity within the context of shelf and slot." ::= { mibdBAProfileEntry 7 } dBAProfile-LogicalAddress-LogicalItem OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A number that specifies an addressable logical entity within the context of a physical address." ::= { mibdBAProfileEntry 8 } dBAProfile-Name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "DBA Profiles are recognized by their names given them by the user. The name is a standard null terminated ASCII string." ::= { mibdBAProfileEntry 9 } dBAProfile-PhoneNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The number to dial for this call." ::= { mibdBAProfileEntry 10 } dBAProfile-BillingNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The billing number to use which is either a 'calling party number' or a 'billing suffix' that is appended to the end of the phone number." ::= { mibdBAProfileEntry 11 } dBAProfile-oCallType OBJECT-TYPE SYNTAX INTEGER { callChNBy (1), callChNByBonding (2), callCh1Ch (3), callCh2Ch (4), callChFt1 (5), callChFt1Aim (6), callChFt1Bo (7), callChFt1StaticBo (8), numberOfCallChTypes (9) } ACCESS read-write STATUS mandatory DESCRIPTION "session channel type." ::= { mibdBAProfileEntry 12 } dBAProfile-oCallMgm OBJECT-TYPE SYNTAX INTEGER { callMgmtStaticRate (1), callMgmtManualRate (2), callMgmtDynamicRate (3), callMgmtDeltaRate (4), callMgmtTimeOfDay (5), callMgmtOneOfEight (6), callMgmtOneOfFourty (7), callMgmtBonding0 (8), callMgmtBonding1 (9), callMgmtBonding2 (10), callMgmtBonding3 (11), numberOfCallMgmtProtocols (12) } ACCESS read-write STATUS mandatory DESCRIPTION "One of the management type listed above." ::= { mibdBAProfileEntry 13 } dBAProfile-oDataSvc OBJECT-TYPE SYNTAX INTEGER { voice (1), n-56kRestricted (2), n-64kClear (3), n-64kRestricted (4), n-56kClear (5), n-384kRestricted (6), n-384kClear (7), n-1536kClear (8), n-1536kRestricted (9), n-128kClear (10), n-192kClear (11), n-256kClear (12), n-320kClear (13), dws384Clear (14), n-448Clear (15), n-512Clear (16), n-576Clear (17), n-640Clear (18), n-704Clear (19), n-768Clear (20), n-832Clear (21), n-896Clear (22), n-960Clear (23), n-1024Clear (24), n-1088Clear (25), n-1152Clear (26), n-1216Clear (27), n-1280Clear (28), n-1344Clear (29), n-1408Clear (30), n-1472Clear (31), n-1600Clear (32), n-1664Clear (33), n-1728Clear (34), n-1792Clear (35), n-1856Clear (36), n-1920Clear (37), x30RestrictedBearer (39), v110ClearBearer (40), n-64kX30Restricted (41), n-56kV110Clear (42), modem (43), atmodem (44), n-2456kV110 (46), n-4856kV110 (47), n-9656kV110 (48), n-19256kV110 (49), n-38456kV110 (50), n-2456krV110 (51), n-4856krV110 (52), n-9656krV110 (53), n-19256krV110 (54), n-38456krV110 (55), n-2464kV110 (56), n-4864kV110 (57), n-9664kV110 (58), n-19264kV110 (59), n-38464kV110 (60), n-2464krV110 (61), n-4864krV110 (62), n-9664krV110 (63), n-19264krV110 (64), n-38464krV110 (65), v32 (66), phs64k (67), voiceOverIp (68), atmSvc (70), frameRelaySvc (71), vpnTunnel (72), wormarq (73), n-14456kV110 (74), n-28856kV110 (75), n-14456krV110 (76), n-28856krV110 (77), n-14464kV110 (78), n-28864kV110 (79), n-14464krV110 (80), n-28864krV110 (81), modem31khzAudio (82), x25Svc (83), n-144kClear (255), iptoip (263) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of bearer channel capability to set up for each switched call in the session." ::= { mibdBAProfileEntry 14 } dBAProfile-Force56 OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "TRUE if the data should be treated as 7-bit data even if the switchedCallType would normally imply 8 bit data." ::= { mibdBAProfileEntry 15 } dBAProfile-BaseChannelCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When the session is initially set up, and if it is a fixed session, the number of channels to be used for the call." ::= { mibdBAProfileEntry 16 } dBAProfile-IncrementChannelCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of channels to increment as a block." ::= { mibdBAProfileEntry 17 } dBAProfile-DecrementChannelCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of channels to decrement as a block." ::= { mibdBAProfileEntry 18 } dBAProfile-oFailAction OBJECT-TYPE SYNTAX INTEGER { disc (1), reduce (2), retry (3), numberOfFailureActions (4) } ACCESS read-write STATUS mandatory DESCRIPTION "If unable to establish a dba session based on the parameters specified, then the action to be taken is specified in the failureAction." ::= { mibdBAProfileEntry 19 } dBAProfile-BitInversionRequired OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "TRUE if the data being transferred from the host should be inverted before being sent to the network, and FALSE otherwise. I think this needs to be supported by the device, but I will check before committing. Also, this affects the network interface too, I think." ::= { mibdBAProfileEntry 20 } dBAProfile-Ft1Caller OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "BOOLEAN which is true for Fractional T1 calls when this side is the caller, and FALSE otherwise." ::= { mibdBAProfileEntry 21 } dBAProfile-Ft1Timeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mibdBAProfileEntry 22 } dBAProfile-CallByCallID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ID for the call-by-call signalling for PRI." ::= { mibdBAProfileEntry 23 } dBAProfile-CalledNumberType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indication of whether national number, international number, etc. is specified." ::= { mibdBAProfileEntry 24 } dBAProfile-UnknownPlanUnknown OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If TRUE indicates that UNKNOWN number plan is used in conjunction with unknown number instead of default, ISDN." ::= { mibdBAProfileEntry 25 } dBAProfile-LocalPlanIsdn OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If TRUE indicates that ISDN number plan is used in conjunction with local number instead of default, PRIVATE." ::= { mibdBAProfileEntry 26 } dBAProfile-TransitNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The string for use in the 'transit network ie' for PRI calling when going through a LEC." ::= { mibdBAProfileEntry 27 } dBAProfile-oAutoBERT OBJECT-TYPE SYNTAX INTEGER { off (1), n-15Sec (2), n-30Sec (3), n-60Sec (4), n-90Sec (5), n-120Sec (6), numberOfBertTestOptions (7) } ACCESS read-write STATUS mandatory DESCRIPTION "Should we BERT at session startup and for how long." ::= { mibdBAProfileEntry 28 } dBAProfile-TimedCall OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "TRUE if we should pay attention to the following time period parameters. Not used when the call type is dynamic N-by." ::= { mibdBAProfileEntry 29 } dBAProfile-FlagIdle OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "TRUE if looking for flag idle, FALSE when looking for mark idle." ::= { mibdBAProfileEntry 30 } dBAProfile-oDynAlg OBJECT-TYPE SYNTAX INTEGER { constant (1), linear (2), quadratic (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The algorithm to use for determining weighted line utilization." ::= { mibdBAProfileEntry 31 } dBAProfile-SecondsOfHistory OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds to keep history data around for. This number is in the range of 1 through MAX_HISTORY_SECONDS." ::= { mibdBAProfileEntry 32 } dBAProfile-AddSecondsOfPersistence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Once the upper threshold of utilization is passed, the number of seconds it should stay there is defined here." ::= { mibdBAProfileEntry 33 } dBAProfile-RemoveSecondsOfPersistence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Once the lower threshold of utilization is passed, the number of seconds it should stay there is defined here." ::= { mibdBAProfileEntry 34 } dBAProfile-NailedUpGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Nailed-up group letter. This is a group or number field as defined in lcdparam.h." ::= { mibdBAProfileEntry 35 } dBAProfile-CallPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "DBA call password authenticated against port's password on receiver side. Ignored if port's password is not defined." ::= { mibdBAProfileEntry 36 } dBAProfile-DbaPriNumberingPlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls." ::= { mibdBAProfileEntry 37 } dBAProfile-Action-o OBJECT-TYPE SYNTAX INTEGER { noAction (1), createProfile (2), deleteProfile (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mibdBAProfileEntry 38 } -- The mibdBAProfile__timer_period_parameters table -- -- This table contains parameters for the mibdBAProfile__timer_period_parameters profile -- mibdBAProfile-TimerPeriodParametersTable OBJECT-TYPE SYNTAX SEQUENCE OF MibdBAProfile-TimerPeriodParametersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibdBAProfile__timer_period_parameters profile entries." ::= { mibdBAProfile 2 } mibdBAProfile-TimerPeriodParametersEntry OBJECT-TYPE SYNTAX MibdBAProfile-TimerPeriodParametersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibdBAProfile__timer_period_parameters entry containing objects that maps to the parameters of mibdBAProfile__timer_period_parameters profile." INDEX { dBAProfile-TimerPeriodParameters-Shelf-o, dBAProfile-TimerPeriodParameters-Slot-o, dBAProfile-TimerPeriodParameters-Item-o, dBAProfile-TimerPeriodParameters-LogicalItem-o, dBAProfile-TimerPeriodParameters-Index-o } ::= { mibdBAProfile-TimerPeriodParametersTable 1 } MibdBAProfile-TimerPeriodParametersEntry ::= SEQUENCE { dBAProfile-TimerPeriodParameters-Shelf-o INTEGER, dBAProfile-TimerPeriodParameters-Slot-o INTEGER, dBAProfile-TimerPeriodParameters-Item-o INTEGER, dBAProfile-TimerPeriodParameters-LogicalItem-o INTEGER, dBAProfile-TimerPeriodParameters-Index-o INTEGER, dBAProfile-TimerPeriodParameters-oActiv INTEGER, dBAProfile-TimerPeriodParameters-StartingTime INTEGER, dBAProfile-TimerPeriodParameters-MinimumChannelCount INTEGER, dBAProfile-TimerPeriodParameters-MaximumChannelCount INTEGER, dBAProfile-TimerPeriodParameters-TargetUtilization INTEGER, dBAProfile-TimerPeriodParameters-X25chanTargetUtilization INTEGER } dBAProfile-TimerPeriodParameters-Shelf-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfile-TimerPeriodParametersEntry 1 } dBAProfile-TimerPeriodParameters-Slot-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfile-TimerPeriodParametersEntry 2 } dBAProfile-TimerPeriodParameters-Item-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfile-TimerPeriodParametersEntry 3 } dBAProfile-TimerPeriodParameters-LogicalItem-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfile-TimerPeriodParametersEntry 4 } dBAProfile-TimerPeriodParameters-Index-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibdBAProfile-TimerPeriodParametersEntry 5 } dBAProfile-TimerPeriodParameters-oActiv OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), shutdown (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Like the other sub-structures above, the number of time-periods actually used is variable. Therefore, this is an indication within each structure of usage." ::= { mibdBAProfile-TimerPeriodParametersEntry 6 } dBAProfile-TimerPeriodParameters-StartingTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Each time period has a starting time, and an ending time (which is implicit by the next starting time specified in another structure). The starting time is specified internally as the number of seconds after midnight, where midnight itself has a value of zero." ::= { mibdBAProfile-TimerPeriodParametersEntry 7 } dBAProfile-TimerPeriodParameters-MinimumChannelCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The smallest number of channels to use during this time period." ::= { mibdBAProfile-TimerPeriodParametersEntry 8 } dBAProfile-TimerPeriodParameters-MaximumChannelCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of channels to use during this time period." ::= { mibdBAProfile-TimerPeriodParametersEntry 9 } dBAProfile-TimerPeriodParameters-TargetUtilization OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The percentage utilization to aim for. This is used as a parameter to the bandwidth heuristics." ::= { mibdBAProfile-TimerPeriodParametersEntry 10 } dBAProfile-TimerPeriodParameters-X25chanTargetUtilization OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The percentage utilization to aim for. This is used as a parameter to the bandwidth heuristics." ::= { mibdBAProfile-TimerPeriodParametersEntry 11 } END