-- COPYRIGHT NOTICE -- Copyright (c) Hewlett Packard Company, 2003 -- All rights reserved -- BLADETYPE2-NETWORK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, IpAddress, Unsigned32 FROM SNMPv2-SMI DisplayString, PhysAddress FROM SNMPv2-TC hpSwitchBladeType2-Mgmt FROM HP-SWITCH-PL-MIB; layer3 MODULE-IDENTITY LAST-UPDATED "200312050000Z" -- 5 December 2003 ORGANIZATION "Hewlett Packard Company " CONTACT-INFO "customerservice@hp.com" DESCRIPTION "The MIB module for the Layer 3 configuration, statistics and information ." ::= { hpSwitchBladeType2-Mgmt 3 } -- MIB_INSERT_START -- ---------------------------------------------------------------------------- -- { INSERT: bt2Network -- ---------------------------------------------------------------------------- layer3Configs OBJECT IDENTIFIER ::= { layer3 1 } layer3Stats OBJECT IDENTIFIER ::= { layer3 2 } layer3Info OBJECT IDENTIFIER ::= { layer3 3 } layer3Oper OBJECT IDENTIFIER ::= { layer3 4 } ipInterfaceCfg OBJECT IDENTIFIER ::= { layer3Configs 1 } ipGatewayCfg OBJECT IDENTIFIER ::= { layer3Configs 2 } ipStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 3 } ipForwardCfg OBJECT IDENTIFIER ::= { layer3Configs 4 } ripCfg OBJECT IDENTIFIER ::= { layer3Configs 5 } vrrpCfg OBJECT IDENTIFIER ::= { layer3Configs 6 } arpCfg OBJECT IDENTIFIER ::= { layer3Configs 7 } ipBootpCfg OBJECT IDENTIFIER ::= { layer3Configs 8 } dnsCfg OBJECT IDENTIFIER ::= { layer3Configs 9 } ipNwfCfg OBJECT IDENTIFIER ::= { layer3Configs 10 } ipRmapCfg OBJECT IDENTIFIER ::= { layer3Configs 11 } ospfCfg OBJECT IDENTIFIER ::= { layer3Configs 13 } ipGeneralCfg OBJECT IDENTIFIER ::= { layer3Configs 14 } igmpCfg OBJECT IDENTIFIER ::= { layer3Configs 15 } rip2Cfg OBJECT IDENTIFIER ::= { layer3Configs 18 } ripStats OBJECT IDENTIFIER ::= { layer3Stats 1 } arpStats OBJECT IDENTIFIER ::= { layer3Stats 2 } routeStats OBJECT IDENTIFIER ::= { layer3Stats 3 } vrrpStats OBJECT IDENTIFIER ::= { layer3Stats 4 } ospfStats OBJECT IDENTIFIER ::= { layer3Stats 5 } clearStats OBJECT IDENTIFIER ::= { layer3Stats 6 } igmpStats OBJECT IDENTIFIER ::= { layer3Stats 7 } rip2Stats OBJECT IDENTIFIER ::= { layer3Stats 13 } dnsStats OBJECT IDENTIFIER ::= { layer3Stats 14 } geal3Stats OBJECT IDENTIFIER ::= { layer3Stats 15 } ipRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 1 } arpInfo OBJECT IDENTIFIER ::= { layer3Info 2 } vrrpInfo OBJECT IDENTIFIER ::= { layer3Info 3 } ospfInfo OBJECT IDENTIFIER ::= { layer3Info 4 } igmpInfo OBJECT IDENTIFIER ::= { layer3Info 5 } rip2Info OBJECT IDENTIFIER ::= { layer3Info 7 } ipInfo OBJECT IDENTIFIER ::= { layer3Info 8 } vrrpOper OBJECT IDENTIFIER ::= { layer3Oper 1 } -- IP Configuration ipInterfaceTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP interface table." ::= { ipInterfaceCfg 1 } ipCurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP interface configuration." ::= { ipInterfaceCfg 2 } ipCurCfgIntfEntry OBJECT-TYPE SYNTAX IpCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip interface table" INDEX { ipCurCfgIntfIndex } ::= { ipCurCfgIntfTable 1 } IpCurCfgIntfEntry ::= SEQUENCE { ipCurCfgIntfIndex Integer32, ipCurCfgIntfAddr IpAddress, ipCurCfgIntfMask IpAddress, ipCurCfgIntfBroadcast IpAddress, ipCurCfgIntfVlan INTEGER, ipCurCfgIntfState INTEGER, ipCurCfgIntfBootpRelay INTEGER } ipCurCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the IP information is related." ::= { ipCurCfgIntfEntry 1} ipCurCfgIntfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface." ::= { ipCurCfgIntfEntry 2 } ipCurCfgIntfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the interface." ::= { ipCurCfgIntfEntry 3 } ipCurCfgIntfBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The broadcast address of the interface." ::= { ipCurCfgIntfEntry 4 } ipCurCfgIntfVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN associated with the interface." ::= { ipCurCfgIntfEntry 5 } ipCurCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the interface." ::= { ipCurCfgIntfEntry 6 } ipCurCfgIntfBootpRelay OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable BOOTP relay." ::= { ipCurCfgIntfEntry 7 } ipNewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of interface configuration in the New Configuration Block." ::= { ipInterfaceCfg 3 } ipNewCfgIntfEntry OBJECT-TYPE SYNTAX IpNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip interface table" INDEX { ipNewCfgIntfIndex } ::= { ipNewCfgIntfTable 1 } IpNewCfgIntfEntry ::= SEQUENCE { ipNewCfgIntfIndex Integer32, ipNewCfgIntfAddr IpAddress, ipNewCfgIntfMask IpAddress, ipNewCfgIntfBroadcast IpAddress, ipNewCfgIntfVlan INTEGER, ipNewCfgIntfState INTEGER, ipNewCfgIntfDelete INTEGER, ipNewCfgIntfBootpRelay INTEGER } ipNewCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the IP information is related." ::= { ipNewCfgIntfEntry 1 } ipNewCfgIntfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the interface." ::= { ipNewCfgIntfEntry 2 } ipNewCfgIntfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of the interface." ::= { ipNewCfgIntfEntry 3 } ipNewCfgIntfBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The broadcast address of the interface." ::= { ipNewCfgIntfEntry 4 } ipNewCfgIntfVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN associated with the interface." ::= { ipNewCfgIntfEntry 5 } ipNewCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the interface." ::= { ipNewCfgIntfEntry 6 } ipNewCfgIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgIntfEntry 7 } ipNewCfgIntfBootpRelay OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable BOOTP relay." ::= { ipNewCfgIntfEntry 8 } -- IP Gateway Table Configuration ipGatewayTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP gateway table." ::= { ipGatewayCfg 3 } ipCurCfgGwTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gateways in the Current configuration Block." ::= { ipGatewayCfg 4 } ipCurCfgGwEntry OBJECT-TYPE SYNTAX IpCurCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip gateway table" INDEX { ipCurCfgGwIndex } ::= { ipCurCfgGwTable 1 } IpCurCfgGwEntry ::= SEQUENCE { ipCurCfgGwIndex Integer32, ipCurCfgGwAddr IpAddress, ipCurCfgGwInterval INTEGER, ipCurCfgGwRetry INTEGER, ipCurCfgGwArp INTEGER, ipCurCfgGwState INTEGER } ipCurCfgGwIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway number for which the information is related." ::= { ipCurCfgGwEntry 1} ipCurCfgGwAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the default gateway." ::= { ipCurCfgGwEntry 2 } ipCurCfgGwInterval OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between ping attempts." ::= { ipCurCfgGwEntry 3 } ipCurCfgGwRetry OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed attempts to declare the default gateway DOWN." ::= { ipCurCfgGwEntry 4 } ipCurCfgGwState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the default gateway." ::= { ipCurCfgGwEntry 5 } ipCurCfgGwArp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of ARP only health checks." ::= { ipCurCfgGwEntry 6 } ipNewCfgGwTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gateway configuration in the new configuration block." ::= { ipGatewayCfg 5 } ipNewCfgGwEntry OBJECT-TYPE SYNTAX IpNewCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip default gateway table" INDEX { ipNewCfgGwIndex } ::= { ipNewCfgGwTable 1 } IpNewCfgGwEntry ::= SEQUENCE { ipNewCfgGwIndex Integer32, ipNewCfgGwAddr IpAddress, ipNewCfgGwInterval INTEGER, ipNewCfgGwRetry INTEGER, ipNewCfgGwState INTEGER, ipNewCfgGwArp INTEGER, ipNewCfgGwDelete INTEGER } ipNewCfgGwIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway number for which the information is related." ::= { ipNewCfgGwEntry 1} ipNewCfgGwAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the default gateway." ::= { ipNewCfgGwEntry 2 } ipNewCfgGwInterval OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-create STATUS current DESCRIPTION "The interval in seconds between ping attempts." ::= { ipNewCfgGwEntry 3 } ipNewCfgGwRetry OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of failed attempts to declare the default gateway DOWN." ::= { ipNewCfgGwEntry 4 } ipNewCfgGwState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the default gateway." ::= { ipNewCfgGwEntry 5 } ipNewCfgGwDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgGwEntry 6 } ipNewCfgGwArp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the ARP only health checks." ::= { ipNewCfgGwEntry 7 } -- -- IP Static Route Configuration -- ipStaticRouteTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the Static Route table." ::= { ipStaticRouteCfg 1 } ipCurCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the current configuration block." ::= { ipStaticRouteCfg 2 } ipCurCfgStaticRouteEntry OBJECT-TYPE SYNTAX IpCurCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipCurCfgStaticRouteIndx } ::= { ipCurCfgStaticRouteTable 1 } IpCurCfgStaticRouteEntry ::= SEQUENCE { ipCurCfgStaticRouteIndx Integer32, ipCurCfgStaticRouteDestIp IpAddress, ipCurCfgStaticRouteMask IpAddress, ipCurCfgStaticRouteGateway IpAddress, ipCurCfgStaticRouteInterface Integer32 } ipCurCfgStaticRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipCurCfgStaticRouteEntry 1} ipCurCfgStaticRouteDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticRouteEntry 2} ipCurCfgStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticRouteEntry 3} ipCurCfgStaticRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticRouteEntry 4} ipCurCfgStaticRouteInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing." ::= { ipCurCfgStaticRouteEntry 5} ipNewCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the new configuration block." ::= { ipStaticRouteCfg 3 } ipNewCfgStaticRouteEntry OBJECT-TYPE SYNTAX IpNewCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipNewCfgStaticRouteIndx } ::= { ipNewCfgStaticRouteTable 1 } IpNewCfgStaticRouteEntry ::= SEQUENCE { ipNewCfgStaticRouteIndx Integer32, ipNewCfgStaticRouteDestIp IpAddress, ipNewCfgStaticRouteMask IpAddress, ipNewCfgStaticRouteGateway IpAddress, ipNewCfgStaticRouteAction INTEGER, ipNewCfgStaticRouteInterface Integer32 } ipNewCfgStaticRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipNewCfgStaticRouteEntry 1} ipNewCfgStaticRouteDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipNewCfgStaticRouteEntry 2} ipNewCfgStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of this route." ::= { ipNewCfgStaticRouteEntry 3} ipNewCfgStaticRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the gateway for this route." ::= { ipNewCfgStaticRouteEntry 4} ipNewCfgStaticRouteAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgStaticRouteEntry 5 } ipNewCfgStaticRouteInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing." ::= { ipNewCfgStaticRouteEntry 6 } -- RIP version 1 Configuration ripCurCfgSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable supplying route updates." ::= { ripCfg 1 } ripNewCfgSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable supplying route updates." ::= { ripCfg 2 } ripCurCfgListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable listening to route updates." ::= { ripCfg 3 } ripNewCfgListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable listening to route updates." ::= { ripCfg 4 } ripCurCfgDefListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable listening to default routes." ::= { ripCfg 5 } ripNewCfgDefListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable listening to default routes." ::= { ripCfg 6 } ripCurCfgStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable supplying static route updates." ::= { ripCfg 7 } ripNewCfgStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable supplying static route updates." ::= { ripCfg 8 } ripCurCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Update Period in seconds." ::= { ripCfg 9 } ripNewCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Update period in seconds." ::= { ripCfg 10 } ripCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP global state." ::= { ripCfg 11 } ripNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn RIP on or off." ::= { ripCfg 12 } ripCurCfgPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP poison reverse." ::= { ripCfg 13 } ripNewCfgPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "RIP poison reverse." ::= { ripCfg 14 } ripCurCfgSplitHorizon OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP split horizon." ::= {ripCfg 15 } ripNewCfgSplitHorizon OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "RIP split horizon." ::= { ripCfg 16 } -- RIP version 2 Configuration ripCurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RipCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of RIP on IP interface configuration in the current_config." ::= { rip2Cfg 1 } ripCurCfgIntfEntry OBJECT-TYPE SYNTAX RipCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about RIP on IP interface." INDEX { ripCurCfgIntfIndex } ::= { ripCurCfgIntfTable 1 } RipCurCfgIntfEntry ::= SEQUENCE { ripCurCfgIntfIndex INTEGER, ripCurCfgIntfVersion INTEGER, ripCurCfgIntfSupply INTEGER, ripCurCfgIntfListen INTEGER, ripCurCfgIntfDefault INTEGER, ripCurCfgIntfTrigUpdate INTEGER, ripCurCfgIntfMcastUpdate INTEGER, ripCurCfgIntfPoisonReverse INTEGER, ripCurCfgIntfState INTEGER, ripCurCfgIntfMetric INTEGER, ripCurCfgIntfAuth INTEGER, ripCurCfgIntfKey DisplayString, ripCurCfgIntfSplitHorizon INTEGER } ripCurCfgIntfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the RIP information is related." ::= { ripCurCfgIntfEntry 1} ripCurCfgIntfVersion OBJECT-TYPE SYNTAX INTEGER { ripVersion1(1), ripVersion2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP version." ::= { ripCurCfgIntfEntry 2 } ripCurCfgIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable supplying route updates." ::= { ripCurCfgIntfEntry 3 } ripCurCfgIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable listening to route updates." ::= { ripCurCfgIntfEntry 4 } ripCurCfgIntfDefault OBJECT-TYPE SYNTAX INTEGER { both(1), listen(2), supply(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies what RIP does with default routes." ::= { ripCurCfgIntfEntry 5 } ripCurCfgIntfTrigUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tirggered updates." ::= { ripCurCfgIntfEntry 6 } ripCurCfgIntfMcastUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable multicast updates." ::= { ripCurCfgIntfEntry 7 } ripCurCfgIntfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP poison reverse." ::= { ripCurCfgIntfEntry 8 } ripCurCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable RIP protocol." ::= { ripCurCfgIntfEntry 9 } ripCurCfgIntfMetric OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP route metric for this interface." ::= { ripCurCfgIntfEntry 10 } ripCurCfgIntfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), password(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable RIP update authorization with a simple plain text password." ::= { ripCurCfgIntfEntry 11 } ripCurCfgIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP update authencation password." ::= { ripCurCfgIntfEntry 12 } ripCurCfgIntfSplitHorizon OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP split horizon." ::= {ripCurCfgIntfEntry 13 } ripNewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RipNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of RIP on IP interface configuration in the new_config." ::= { rip2Cfg 2 } ripNewCfgIntfEntry OBJECT-TYPE SYNTAX RipNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about RIP on IP interface." INDEX { ripNewCfgIntfIndex } ::= { ripNewCfgIntfTable 1 } RipNewCfgIntfEntry ::= SEQUENCE { ripNewCfgIntfIndex INTEGER, ripNewCfgIntfVersion INTEGER, ripNewCfgIntfSupply INTEGER, ripNewCfgIntfListen INTEGER, ripNewCfgIntfDefault INTEGER, ripNewCfgIntfTrigUpdate INTEGER, ripNewCfgIntfMcastUpdate INTEGER, ripNewCfgIntfPoisonReverse INTEGER, ripNewCfgIntfState INTEGER, ripNewCfgIntfMetric INTEGER, ripNewCfgIntfAuth INTEGER, ripNewCfgIntfKey DisplayString, ripNewCfgIntfSplitHorizon INTEGER } ripNewCfgIntfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the RIP information is related." ::= { ripNewCfgIntfEntry 1} ripNewCfgIntfVersion OBJECT-TYPE SYNTAX INTEGER { ripVersion1(1), ripVersion2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "RIP version." ::= { ripNewCfgIntfEntry 2 } ripNewCfgIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable supplying route updates." ::= { ripNewCfgIntfEntry 3 } ripNewCfgIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable listening to route updates." ::= { ripNewCfgIntfEntry 4 } ripNewCfgIntfDefault OBJECT-TYPE SYNTAX INTEGER { both(1), listen(2), supply(3), none(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none." ::= { ripNewCfgIntfEntry 5 } ripNewCfgIntfTrigUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable tirggered updates." ::= { ripNewCfgIntfEntry 6 } ripNewCfgIntfMcastUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable multicast updates." ::= { ripNewCfgIntfEntry 7 } ripNewCfgIntfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "RIP poison reverse." ::= { ripNewCfgIntfEntry 8 } ripNewCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable RIP protocol." ::= { ripNewCfgIntfEntry 9 } ripNewCfgIntfMetric OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "RIP route metric for this interface." ::= { ripNewCfgIntfEntry 10 } ripNewCfgIntfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), password(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RIP update authorization with a simple plain text password." ::= { ripNewCfgIntfEntry 11 } ripNewCfgIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "RIP update authencation password." ::= { ripNewCfgIntfEntry 12 } ripNewCfgIntfSplitHorizon OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "RIP split horizon." ::= { ripNewCfgIntfEntry 13 } ripGeneral OBJECT IDENTIFIER ::= { rip2Cfg 3 } rip2CurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP global state." ::= { ripGeneral 1 } rip2NewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn RIP on or off." ::= { ripGeneral 2 } rip2CurCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Update Period in seconds." ::= { ripGeneral 3 } rip2NewCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Update Period in seconds." ::= { ripGeneral 4 } ripRouteRedistribution OBJECT IDENTIFIER ::= { rip2Cfg 4 } ripRedistributeStatic OBJECT IDENTIFIER ::= { ripRouteRedistribution 1 } ripCurCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ripRedistributeStatic 1 } ripNewCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ripRedistributeStatic 2 } ripCurCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeStatic 5 } ripNewCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeStatic 6 } ripNewCfgStaticAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ripRedistributeStatic 7 } ripNewCfgStaticRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ripRedistributeStatic 8 } ripRedistributeFixed OBJECT IDENTIFIER ::= { ripRouteRedistribution 4 } ripCurCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ripRedistributeFixed 1 } ripNewCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ripRedistributeFixed 2 } ripCurCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeFixed 5 } ripNewCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeFixed 6 } ripNewCfgFixedAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ripRedistributeFixed 7 } ripNewCfgFixedRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ripRedistributeFixed 8 } ripRedistributeOspf OBJECT IDENTIFIER ::= { ripRouteRedistribution 5 } ripCurCfgOspfMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ripRedistributeOspf 1 } ripNewCfgOspfMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ripRedistributeOspf 2 } ripCurCfgOspfOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeOspf 5 } ripNewCfgOspfOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeOspf 6 } ripNewCfgOspfAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ripRedistributeOspf 7 } ripNewCfgOspfRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ripRedistributeOspf 8 } ripRedistributeEospf OBJECT IDENTIFIER ::= { ripRouteRedistribution 6 } ripCurCfgEospfMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ripRedistributeEospf 1 } ripNewCfgEospfMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ripRedistributeEospf 2 } ripCurCfgEospfOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeEospf 5 } ripNewCfgEospfOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ripRedistributeEospf 6 } ripNewCfgEospfAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ripRedistributeEospf 7 } ripNewCfgEospfRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ripRedistributeEospf 8 } -- IP Forwarding Configuration ipFwdGeneralCfg OBJECT IDENTIFIER ::= {ipForwardCfg 1 } ipFwdCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "IP forwarding global state." ::= { ipFwdGeneralCfg 1 } ipFwdNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP forwarding global state." ::= { ipFwdGeneralCfg 2 } ipFwdCurCfgDirectedBcast OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable forwarding directed broadcasts." ::= { ipFwdGeneralCfg 3 } ipFwdNewCfgDirectedBcast OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable forwarding directed broadcasts." ::= { ipFwdGeneralCfg 4 } -- -- ARP configuration -- arpCurCfgReARPPeriod OBJECT-TYPE SYNTAX INTEGER (2..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Re-ARP Period in seconds." ::= { arpCfg 1 } arpNewCfgReARPPeriod OBJECT-TYPE SYNTAX INTEGER (2..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Re-ARP Period in seconds." ::= { arpCfg 2 } -- -- Static ARP Configuration -- ipStaticArpTableMaxSize OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the Static ARP table." ::= { arpCfg 3 } ipCurCfgStaticArpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static ARPs in the current configuration block." ::= { arpCfg 4 } ipCurCfgStaticArpEntry OBJECT-TYPE SYNTAX IpCurCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static ARP table" INDEX { ipCurCfgStaticArpIndx } ::= { ipCurCfgStaticArpTable 1 } IpCurCfgStaticArpEntry ::= SEQUENCE { ipCurCfgStaticArpIndx Integer32, ipCurCfgStaticArpIp IpAddress, ipCurCfgStaticArpMAC PhysAddress, ipCurCfgStaticArpVlan INTEGER, ipCurCfgStaticArpPort Integer32 } ipCurCfgStaticArpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static ARP table." ::= { ipCurCfgStaticArpEntry 1} ipCurCfgStaticArpIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the ARP entry." ::= { ipCurCfgStaticArpEntry 2} ipCurCfgStaticArpMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for the ARP entry." ::= { ipCurCfgStaticArpEntry 3 } ipCurCfgStaticArpVlan OBJECT-TYPE SYNTAX INTEGER(1..4090) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN for the ARP entry." ::= { ipCurCfgStaticArpEntry 4} ipCurCfgStaticArpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port for the ARP entry." ::= { ipCurCfgStaticArpEntry 5} ipNewCfgStaticArpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static ARPs in the new configuration block." ::= { arpCfg 5 } ipNewCfgStaticArpEntry OBJECT-TYPE SYNTAX IpNewCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static ARP table" INDEX { ipNewCfgStaticArpIndx } ::= { ipNewCfgStaticArpTable 1 } IpNewCfgStaticArpEntry ::= SEQUENCE { ipNewCfgStaticArpIndx Integer32, ipNewCfgStaticArpIp IpAddress, ipNewCfgStaticArpMAC PhysAddress, ipNewCfgStaticArpVlan INTEGER, ipNewCfgStaticArpPort Integer32, ipNewCfgStaticArpAction INTEGER } ipNewCfgStaticArpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static ARP table." ::= { ipNewCfgStaticArpEntry 1} ipNewCfgStaticArpIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address for the ARP entry." ::= { ipNewCfgStaticArpEntry 2} ipNewCfgStaticArpMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address for the ARP entry." ::= { ipNewCfgStaticArpEntry 3 } ipNewCfgStaticArpVlan OBJECT-TYPE SYNTAX INTEGER(1..4090) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN for the ARP entry." ::= { ipNewCfgStaticArpEntry 4} ipNewCfgStaticArpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The port for the ARP entry." ::= { ipNewCfgStaticArpEntry 5} ipNewCfgStaticArpAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgStaticArpEntry 6 } -- -- IP Bootp Configration -- ipCurCfgBootpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of BOOTP server." ::= { ipBootpCfg 1 } ipNewCfgBootpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of BOOTP server." ::= { ipBootpCfg 2 } ipCurCfgBootpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of second BOOTP server." ::= { ipBootpCfg 3 } ipNewCfgBootpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of second BOOTP server." ::= { ipBootpCfg 4 } ipCurCfgBootpState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of BOOTP relay." ::= { ipBootpCfg 5 } ipNewCfgBootpState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of BOOTP relay." ::= { ipBootpCfg 6 } ipCurCfgDhcpOpt82State OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of DHCP relay agent information." ::= { ipBootpCfg 7 } ipNewCfgDhcpOpt82State OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of DHCP relay agent information." ::= { ipBootpCfg 8 } -- VRRP (Virtual Router Redundantcy Protocol) Group vrrpGeneral OBJECT IDENTIFIER ::= { vrrpCfg 1 } vrrpCurCfgGenState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VRRP operation globally." ::= { vrrpGeneral 1 } vrrpNewCfgGenState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable VRRP operation globally." ::= { vrrpGeneral 2 } vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers." ::= { vrrpGeneral 3 } vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers." ::= { vrrpGeneral 4 } vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces." ::= { vrrpGeneral 5 } vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces." ::= { vrrpGeneral 6 } vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router." ::= { vrrpGeneral 7 } vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router." ::= { vrrpGeneral 8 } vrrpCurCfgGenTckL4PortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router." ::= { vrrpGeneral 9 } vrrpNewCfgGenTckL4PortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router." ::= { vrrpGeneral 10 } vrrpCurCfgGenTckRServerInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router." ::= { vrrpGeneral 11 } vrrpNewCfgGenTckRServerInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router." ::= { vrrpGeneral 12 } vrrpCurCfgGenTckHsrpInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements." ::= { vrrpGeneral 13 } vrrpNewCfgGenTckHsrpInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements." ::= { vrrpGeneral 14 } vrrpCurCfgGenHotstandby OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable hotstandby processing." ::= { vrrpGeneral 15 } vrrpNewCfgGenHotstandby OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable hotstandby processing." ::= { vrrpGeneral 16 } vrrpCurCfgGenTckHsrvInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN." ::= { vrrpGeneral 17 } vrrpNewCfgGenTckHsrvInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN." ::= { vrrpGeneral 18 } vrrpVirtRtrTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP virtual router table." ::= { vrrpCfg 2 } vrrpCurCfgVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual routers configuration in current_config." ::= { vrrpCfg 3 } vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP virtual router." INDEX { vrrpCurCfgVirtRtrIndx } ::= { vrrpCurCfgVirtRtrTable 1 } VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE { vrrpCurCfgVirtRtrIndx Integer32, vrrpCurCfgVirtRtrID INTEGER, vrrpCurCfgVirtRtrAddr IpAddress, vrrpCurCfgVirtRtrIfIndex Integer32, vrrpCurCfgVirtRtrInterval INTEGER, vrrpCurCfgVirtRtrPriority INTEGER, vrrpCurCfgVirtRtrPreempt INTEGER, vrrpCurCfgVirtRtrState INTEGER, vrrpCurCfgVirtRtrSharing INTEGER, vrrpCurCfgVirtRtrTckVirtRtr INTEGER, vrrpCurCfgVirtRtrTckIpIntf INTEGER, vrrpCurCfgVirtRtrTckVlanPort INTEGER, vrrpCurCfgVirtRtrTckL4Port INTEGER, vrrpCurCfgVirtRtrTckRServer INTEGER, vrrpCurCfgVirtRtrTckHsrp INTEGER, vrrpCurCfgVirtRtrTckHsrv INTEGER } vrrpCurCfgVirtRtrIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpCurCfgVirtRtrTableEntry 1 } vrrpCurCfgVirtRtrID OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpCurCfgVirtRtrTableEntry 2 } vrrpCurCfgVirtRtrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router IP address." ::= { vrrpCurCfgVirtRtrTableEntry 3 } vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpCurCfgVirtRtrTableEntry 4 } vrrpCurCfgVirtRtrInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpCurCfgVirtRtrTableEntry 5 } vrrpCurCfgVirtRtrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpCurCfgVirtRtrTableEntry 6 } vrrpCurCfgVirtRtrPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpCurCfgVirtRtrTableEntry 7 } vrrpCurCfgVirtRtrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 8 } vrrpCurCfgVirtRtrSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 9 } vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc." ::= { vrrpCurCfgVirtRtrTableEntry 10 } vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc." ::= { vrrpCurCfgVirtRtrTableEntry 11 } vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc." ::= { vrrpCurCfgVirtRtrTableEntry 12 } vrrpCurCfgVirtRtrTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 13 } vrrpCurCfgVirtRtrTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 14 } vrrpCurCfgVirtRtrTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 15 } vrrpCurCfgVirtRtrTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 16 } vrrpNewCfgVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual routers configuration in current_config." ::= { vrrpCfg 4 } vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP virtual router." INDEX { vrrpNewCfgVirtRtrIndx } ::= { vrrpNewCfgVirtRtrTable 1 } VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE { vrrpNewCfgVirtRtrIndx Integer32, vrrpNewCfgVirtRtrID INTEGER, vrrpNewCfgVirtRtrAddr IpAddress, vrrpNewCfgVirtRtrIfIndex Integer32, vrrpNewCfgVirtRtrInterval INTEGER, vrrpNewCfgVirtRtrPriority INTEGER, vrrpNewCfgVirtRtrPreempt INTEGER, vrrpNewCfgVirtRtrState INTEGER, vrrpNewCfgVirtRtrDelete INTEGER, vrrpNewCfgVirtRtrSharing INTEGER, vrrpNewCfgVirtRtrTckVirtRtr INTEGER, vrrpNewCfgVirtRtrTckIpIntf INTEGER, vrrpNewCfgVirtRtrTckVlanPort INTEGER, vrrpNewCfgVirtRtrTckL4Port INTEGER, vrrpNewCfgVirtRtrTckRServer INTEGER, vrrpNewCfgVirtRtrTckHsrp INTEGER, vrrpNewCfgVirtRtrTckHsrv INTEGER } vrrpNewCfgVirtRtrIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpNewCfgVirtRtrTableEntry 1 } vrrpNewCfgVirtRtrID OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpNewCfgVirtRtrTableEntry 2 } vrrpNewCfgVirtRtrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router IP address." ::= { vrrpNewCfgVirtRtrTableEntry 3 } vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpNewCfgVirtRtrTableEntry 4 } vrrpNewCfgVirtRtrInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpNewCfgVirtRtrTableEntry 5 } vrrpNewCfgVirtRtrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 6 } vrrpNewCfgVirtRtrPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpNewCfgVirtRtrTableEntry 7 } vrrpNewCfgVirtRtrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 8 } vrrpNewCfgVirtRtrDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row." ::= { vrrpNewCfgVirtRtrTableEntry 9 } vrrpNewCfgVirtRtrSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 10 } vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc." ::= { vrrpNewCfgVirtRtrTableEntry 11 } vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc." ::= { vrrpNewCfgVirtRtrTableEntry 12 } vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc." ::= { vrrpNewCfgVirtRtrTableEntry 13 } vrrpNewCfgVirtRtrTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 14 } vrrpNewCfgVirtRtrTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 15 } vrrpNewCfgVirtRtrTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 16 } vrrpNewCfgVirtRtrTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 17 } -- VRRP Interface Table vrrpIfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP interface table." ::= { vrrpCfg 5 } vrrpCurCfgIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP interface configuration in current_config." ::= { vrrpCfg 6 } vrrpCurCfgIfTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP interface." INDEX { vrrpCurCfgIfIndx } ::= { vrrpCurCfgIfTable 1 } VrrpCurCfgIfTableEntry ::= SEQUENCE { vrrpCurCfgIfIndx Integer32, vrrpCurCfgIfAuthType INTEGER, vrrpCurCfgIfPasswd DisplayString } vrrpCurCfgIfIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP interface index. This is eqivalent to IfIndex." ::= { vrrpCurCfgIfTableEntry 1 } vrrpCurCfgIfAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), simple-text-password(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication." ::= { vrrpCurCfgIfTableEntry 2 } vrrpCurCfgIfPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "The password for authentication." ::= { vrrpCurCfgIfTableEntry 3 } vrrpNewCfgIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP interface configuration in current_config." ::= { vrrpCfg 7 } vrrpNewCfgIfTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP interface." INDEX { vrrpNewCfgIfIndx } ::= { vrrpNewCfgIfTable 1 } VrrpNewCfgIfTableEntry ::= SEQUENCE { vrrpNewCfgIfIndx Integer32, vrrpNewCfgIfAuthType INTEGER, vrrpNewCfgIfPasswd DisplayString, vrrpNewCfgIfDelete INTEGER } vrrpNewCfgIfIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP interface index. This is eqivalent to IfIndex." ::= { vrrpNewCfgIfTableEntry 1 } vrrpNewCfgIfAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), simple-text-password(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication." ::= { vrrpNewCfgIfTableEntry 2 } vrrpNewCfgIfPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..7)) MAX-ACCESS read-create STATUS current DESCRIPTION "The password for authentication." ::= { vrrpNewCfgIfTableEntry 3 } vrrpNewCfgIfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row." ::= { vrrpNewCfgIfTableEntry 4 } -- Failover Virtual Router Groups vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP Group table." ::= { vrrpCfg 8 } vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router group in current_config." ::= { vrrpCfg 9 } vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP failover virtual router." INDEX { vrrpCurCfgVirtRtrGrpIndx } ::= { vrrpCurCfgVirtRtrGrpTable 1 } VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE { vrrpCurCfgVirtRtrGrpIndx Integer32, vrrpCurCfgVirtRtrGrpID INTEGER, vrrpCurCfgVirtRtrGrpIfIndex Integer32, vrrpCurCfgVirtRtrGrpInterval INTEGER, vrrpCurCfgVirtRtrGrpPriority INTEGER, vrrpCurCfgVirtRtrGrpPreempt INTEGER, vrrpCurCfgVirtRtrGrpState INTEGER, vrrpCurCfgVirtRtrGrpSharing INTEGER, vrrpCurCfgVirtRtrGrpTckVirtRtr INTEGER, vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER, vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER, vrrpCurCfgVirtRtrGrpTckL4Port INTEGER, vrrpCurCfgVirtRtrGrpTckRServer INTEGER, vrrpCurCfgVirtRtrGrpTckHsrp INTEGER, vrrpCurCfgVirtRtrGrpTckHsrv INTEGER } vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpCurCfgVirtRtrGrpTableEntry 1 } vrrpCurCfgVirtRtrGrpID OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpCurCfgVirtRtrGrpTableEntry 2 } vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpCurCfgVirtRtrGrpTableEntry 3 } vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpCurCfgVirtRtrGrpTableEntry 4 } vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpCurCfgVirtRtrGrpTableEntry 5 } vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpCurCfgVirtRtrGrpTableEntry 6 } vrrpCurCfgVirtRtrGrpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 7 } vrrpCurCfgVirtRtrGrpSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 8 } vrrpCurCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 9 } vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 10 } vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 11 } vrrpCurCfgVirtRtrGrpTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 12 } vrrpCurCfgVirtRtrGrpTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 13 } vrrpCurCfgVirtRtrGrpTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 14 } vrrpCurCfgVirtRtrGrpTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 15 } vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router group configuration in new_config." ::= { vrrpCfg 10 } vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP failover virtual router." INDEX { vrrpNewCfgVirtRtrGrpIndx } ::= { vrrpNewCfgVirtRtrGrpTable 1 } VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE { vrrpNewCfgVirtRtrGrpIndx Integer32, vrrpNewCfgVirtRtrGrpID INTEGER, vrrpNewCfgVirtRtrGrpIfIndex Integer32, vrrpNewCfgVirtRtrGrpInterval INTEGER, vrrpNewCfgVirtRtrGrpPriority INTEGER, vrrpNewCfgVirtRtrGrpPreempt INTEGER, vrrpNewCfgVirtRtrGrpState INTEGER, vrrpNewCfgVirtRtrGrpDelete INTEGER, vrrpNewCfgVirtRtrGrpSharing INTEGER, vrrpNewCfgVirtRtrGrpTckVirtRtr INTEGER, vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER, vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER, vrrpNewCfgVirtRtrGrpTckL4Port INTEGER, vrrpNewCfgVirtRtrGrpTckRServer INTEGER, vrrpNewCfgVirtRtrGrpTckHsrp INTEGER, vrrpNewCfgVirtRtrGrpTckHsrv INTEGER } vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpNewCfgVirtRtrGrpTableEntry 1 } vrrpNewCfgVirtRtrGrpID OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpNewCfgVirtRtrGrpTableEntry 2 } vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpNewCfgVirtRtrGrpTableEntry 3 } vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpNewCfgVirtRtrGrpTableEntry 4 } vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 5 } vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpNewCfgVirtRtrGrpTableEntry 6 } vrrpNewCfgVirtRtrGrpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 7 } vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row." ::= { vrrpNewCfgVirtRtrGrpTableEntry 8 } vrrpNewCfgVirtRtrGrpSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 9 } vrrpNewCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 10 } vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 11 } vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 12 } vrrpNewCfgVirtRtrGrpTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 13 } vrrpNewCfgVirtRtrGrpTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 14 } vrrpNewCfgVirtRtrGrpTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 15 } vrrpNewCfgVirtRtrGrpTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 16 } -- Domain Name Server Configuration dnsCurCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS primary IP address in the current_configuration block." ::= { dnsCfg 1 } dnsNewCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS primary IP address in the new_configuration block." ::= { dnsCfg 2 } dnsCurCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS primary IP address in the current_configuration block." ::= { dnsCfg 3 } dnsNewCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS primary IP address in the new_configuration block." ::= { dnsCfg 4 } dnsCurCfgDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..191)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS doamin name in the current_configuration block." ::= { dnsCfg 5 } dnsNewCfgDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..191)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS doamin name in the new_configuration block." ::= { dnsCfg 6 } -- -- IP network filter configuration -- ipNwfTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP network filter table." ::= { ipNwfCfg 1 } ipCurCfgNwfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP network filter configuration in the current_config." ::= { ipNwfCfg 2 } ipCurCfgNwfEntry OBJECT-TYPE SYNTAX IpCurCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP network filter." INDEX { ipCurCfgNwfIndex } ::= { ipCurCfgNwfTable 1 } IpCurCfgNwfEntry ::= SEQUENCE { ipCurCfgNwfIndex Integer32, ipCurCfgNwfAddr IpAddress, ipCurCfgNwfMask IpAddress, ipCurCfgNwfState INTEGER } ipCurCfgNwfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The netowrk filter number for which the NWF is related." ::= { ipCurCfgNwfEntry 1} ipCurCfgNwfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the network filter." ::= { ipCurCfgNwfEntry 2 } ipCurCfgNwfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the network filter." ::= { ipCurCfgNwfEntry 3 } ipCurCfgNwfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the network filter." ::= { ipCurCfgNwfEntry 4 } ipNewCfgNwfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP network filter configuration in the current_config." ::= { ipNwfCfg 3 } ipNewCfgNwfEntry OBJECT-TYPE SYNTAX IpNewCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP network filter." INDEX { ipNewCfgNwfIndex } ::= { ipNewCfgNwfTable 1 } IpNewCfgNwfEntry ::= SEQUENCE { ipNewCfgNwfIndex Integer32, ipNewCfgNwfAddr IpAddress, ipNewCfgNwfMask IpAddress, ipNewCfgNwfState INTEGER, ipNewCfgNwfDelete INTEGER } ipNewCfgNwfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The netowrk filter number for which the NWF is related." ::= { ipNewCfgNwfEntry 1} ipNewCfgNwfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the network filter." ::= { ipNewCfgNwfEntry 2 } ipNewCfgNwfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of the network filter." ::= { ipNewCfgNwfEntry 3 } ipNewCfgNwfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the network filter." ::= { ipNewCfgNwfEntry 4 } ipNewCfgNwfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgNwfEntry 5 } -- -- IP route map configuration -- ipRmapTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP route map table." ::= { ipRmapCfg 1 } ipCurCfgRmapTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map configuration in the current_config." ::= { ipRmapCfg 2 } ipCurCfgRmapEntry OBJECT-TYPE SYNTAX IpCurCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipCurCfgRmapIndex } ::= { ipCurCfgRmapTable 1 } IpCurCfgRmapEntry ::= SEQUENCE { ipCurCfgRmapIndex Integer32, ipCurCfgRmapLp Unsigned32, ipCurCfgRmapMetric Unsigned32, ipCurCfgRmapPrec INTEGER, ipCurCfgRmapWeight INTEGER, ipCurCfgRmapState INTEGER, ipCurCfgRmapMetricType INTEGER, ipCurCfgRmapAp DisplayString } ipCurCfgRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipCurCfgRmapEntry 1} ipCurCfgRmapLp OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The local-preference of the route map. 4294967295 means none" ::= { ipCurCfgRmapEntry 2 } ipCurCfgRmapMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric of the route map. 4294967295 means none" ::= { ipCurCfgRmapEntry 3 } ipCurCfgRmapPrec OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The precedence of the route map." ::= { ipCurCfgRmapEntry 4 } ipCurCfgRmapWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The weight of the route map. 65535 means none" ::= { ipCurCfgRmapEntry 5 } ipCurCfgRmapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map." ::= { ipCurCfgRmapEntry 6 } ipCurCfgRmapAp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..18)) MAX-ACCESS read-only STATUS current DESCRIPTION "The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]" ::= { ipCurCfgRmapEntry 7 } ipCurCfgRmapMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF metric-type of the matched route." ::= { ipCurCfgRmapEntry 8 } ipNewCfgRmapTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map configuration in the current_config." ::= { ipRmapCfg 3 } ipNewCfgRmapEntry OBJECT-TYPE SYNTAX IpNewCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipNewCfgRmapIndex } ::= { ipNewCfgRmapTable 1 } IpNewCfgRmapEntry ::= SEQUENCE { ipNewCfgRmapIndex Integer32, ipNewCfgRmapLp Unsigned32, ipNewCfgRmapMetric Unsigned32, ipNewCfgRmapPrec INTEGER, ipNewCfgRmapWeight INTEGER, ipNewCfgRmapState INTEGER, ipNewCfgRmapAp DisplayString, ipNewCfgRmapMetricType INTEGER, ipNewCfgRmapDelete INTEGER } ipNewCfgRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipNewCfgRmapEntry 1} ipNewCfgRmapLp OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The local-preference of the route map. 4294967295 means none" ::= { ipNewCfgRmapEntry 2 } ipNewCfgRmapMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The metric of the route map. 4294967295 means none" ::= { ipNewCfgRmapEntry 3 } ipNewCfgRmapPrec OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The precedence of the route map." ::= { ipNewCfgRmapEntry 4 } ipNewCfgRmapWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The weight of the route map. 65535 means none" ::= { ipNewCfgRmapEntry 5 } ipNewCfgRmapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the route map." ::= { ipNewCfgRmapEntry 6 } ipNewCfgRmapAp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..18)) MAX-ACCESS read-create STATUS current DESCRIPTION "The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]" ::= { ipNewCfgRmapEntry 7 } ipNewCfgRmapMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF metric-type of the matched route." ::= { ipNewCfgRmapEntry 8 } ipNewCfgRmapDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgRmapEntry 9 } ipAlistTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP route map table." ::= { ipRmapCfg 4 } ipCurCfgAlistTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access list configuration in the current_config." ::= { ipRmapCfg 5 } ipCurCfgAlistEntry OBJECT-TYPE SYNTAX IpCurCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipCurCfgAlistRmapIndex, ipCurCfgAlistIndex } ::= { ipCurCfgAlistTable 1 } IpCurCfgAlistEntry ::= SEQUENCE { ipCurCfgAlistRmapIndex Integer32, ipCurCfgAlistIndex Integer32, ipCurCfgAlistNwf INTEGER, ipCurCfgAlistMetric Unsigned32, ipCurCfgAlistAction INTEGER, ipCurCfgAlistState INTEGER } ipCurCfgAlistRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipCurCfgAlistEntry 1 } ipCurCfgAlistIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access list number for which the access list is related." ::= { ipCurCfgAlistEntry 2 } ipCurCfgAlistNwf OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The network filter number of the route map access list. 0 means none" ::= { ipCurCfgAlistEntry 3 } ipCurCfgAlistMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric of the route map access list. 4294967295 means none" ::= { ipCurCfgAlistEntry 4 } ipCurCfgAlistAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action of the route map access list." ::= { ipCurCfgAlistEntry 5 } ipCurCfgAlistState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map access list." ::= { ipCurCfgAlistEntry 6 } ipNewCfgAlistTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access list configuration in the current_config." ::= { ipRmapCfg 6 } ipNewCfgAlistEntry OBJECT-TYPE SYNTAX IpNewCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipNewCfgAlistRmapIndex, ipNewCfgAlistIndex } ::= { ipNewCfgAlistTable 1 } IpNewCfgAlistEntry ::= SEQUENCE { ipNewCfgAlistRmapIndex Integer32, ipNewCfgAlistIndex Integer32, ipNewCfgAlistNwf INTEGER, ipNewCfgAlistMetric Unsigned32, ipNewCfgAlistAction INTEGER, ipNewCfgAlistState INTEGER, ipNewCfgAlistDelete INTEGER } ipNewCfgAlistRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipNewCfgAlistEntry 1 } ipNewCfgAlistIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access list number for which the access list is related." ::= { ipNewCfgAlistEntry 2 } ipNewCfgAlistNwf OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The network filter number of the route map access list. 0 means none" ::= { ipNewCfgAlistEntry 3 } ipNewCfgAlistMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The metric of the route map access list. 4294967295 means none" ::= { ipNewCfgAlistEntry 4 } ipNewCfgAlistAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Action of the route map access list." ::= { ipNewCfgAlistEntry 5 } ipNewCfgAlistState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the route map access list." ::= { ipNewCfgAlistEntry 6 } ipNewCfgAlistDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgAlistEntry 7 } ipAspathTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP route map table." ::= { ipRmapCfg 7 } ipCurCfgAspathTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access path configuration." ::= { ipRmapCfg 8 } ipCurCfgAspathEntry OBJECT-TYPE SYNTAX IpCurCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipCurCfgAspathRmapIndex, ipCurCfgAlistIndex } ::= { ipCurCfgAspathTable 1 } IpCurCfgAspathEntry ::= SEQUENCE { ipCurCfgAspathRmapIndex Integer32, ipCurCfgAspathIndex Integer32, ipCurCfgAspathAS INTEGER, ipCurCfgAspathAction INTEGER, ipCurCfgAspathState INTEGER } ipCurCfgAspathRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipCurCfgAspathEntry 1 } ipCurCfgAspathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access path number for which the access list is related." ::= { ipCurCfgAspathEntry 2 } ipCurCfgAspathAS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the route map access path. 0 means none" ::= { ipCurCfgAspathEntry 3 } ipCurCfgAspathAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action of the route map access path." ::= { ipCurCfgAspathEntry 4 } ipCurCfgAspathState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map access path." ::= { ipCurCfgAspathEntry 5 } ipNewCfgAspathTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access path configuration" ::= { ipRmapCfg 9 } ipNewCfgAspathEntry OBJECT-TYPE SYNTAX IpNewCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipNewCfgAspathRmapIndex, ipNewCfgAspathIndex } ::= { ipNewCfgAspathTable 1 } IpNewCfgAspathEntry ::= SEQUENCE { ipNewCfgAspathRmapIndex Integer32, ipNewCfgAspathIndex Integer32, ipNewCfgAspathAS INTEGER, ipNewCfgAspathAction INTEGER, ipNewCfgAspathState INTEGER, ipNewCfgAspathDelete INTEGER } ipNewCfgAspathRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipNewCfgAspathEntry 1 } ipNewCfgAspathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access path number for which the access list is related." ::= { ipNewCfgAspathEntry 2 } ipNewCfgAspathAS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The AS number of the route map access path. 0 means none" ::= { ipNewCfgAspathEntry 3 } ipNewCfgAspathAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Action of the route map access path." ::= { ipNewCfgAspathEntry 4 } ipNewCfgAspathState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the route map access path." ::= { ipNewCfgAspathEntry 5 } ipNewCfgAspathDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgAspathEntry 6 } -- -- IP OSPF configuration -- ospfGeneral OBJECT IDENTIFIER ::= { ospfCfg 1 } ospfCurCfgDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the metric to be assigned." ::= { ospfGeneral 1 } ospfNewCfgDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the metric to be assigned." ::= { ospfGeneral 2 } ospfCurCfgDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the AS External metric type to be assigned." ::= { ospfGeneral 3 } ospfNewCfgDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the AS External metric type to be assigned." ::= { ospfGeneral 4 } ospfIntfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Interface table." ::= { ospfGeneral 5 } ospfAreaTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Area table." ::= { ospfGeneral 6 } ospfRangeTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Range table." ::= { ospfGeneral 7 } ospfVirtIntfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Virtual Interface table." ::= { ospfGeneral 8 } ospfHostTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Host table." ::= { ospfGeneral 9 } ospfCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF global state." ::= { ospfGeneral 10 } ospfNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn OSPF on or off." ::= { ospfGeneral 11 } ospfCurCfgAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area configuration in the current_config." ::= { ospfCfg 2 } ospfCurCfgAreaEntry OBJECT-TYPE SYNTAX OspfCurCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfCurCfgAreaIndex } ::= { ospfCurCfgAreaTable 1 } OspfCurCfgAreaEntry ::= SEQUENCE { ospfCurCfgAreaIndex Integer32, ospfCurCfgAreaId IpAddress, ospfCurCfgAreaSpfInterval INTEGER, ospfCurCfgAreaAuthType INTEGER, ospfCurCfgAreaType INTEGER, ospfCurCfgAreaMetric INTEGER, ospfCurCfgAreaStatus INTEGER } ospfCurCfgAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF area table is related." ::= { ospfCurCfgAreaEntry 1} ospfCurCfgAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF area." ::= { ospfCurCfgAreaEntry 2 } ospfCurCfgAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The SPF interval for the OSPF area." ::= { ospfCurCfgAreaEntry 3 } ospfCurCfgAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication." ::= { ospfCurCfgAreaEntry 4 } ospfCurCfgAreaType OBJECT-TYPE SYNTAX INTEGER { transit(0), stub(1), nssa(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of Area. transit(0) stub(1) nssa(2)" ::= { ospfCurCfgAreaEntry 5 } ospfCurCfgAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Metric (1-65535)" ::= { ospfCurCfgAreaEntry 6 } ospfCurCfgAreaStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status disabled(0) enabled(1)" ::= { ospfCurCfgAreaEntry 7 } ospfNewCfgAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area configuration in the new_config." ::= { ospfCfg 3 } ospfNewCfgAreaEntry OBJECT-TYPE SYNTAX OspfNewCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfNewCfgAreaIndex } ::= { ospfNewCfgAreaTable 1 } OspfNewCfgAreaEntry ::= SEQUENCE { ospfNewCfgAreaIndex Integer32, ospfNewCfgAreaId IpAddress, ospfNewCfgAreaSpfInterval INTEGER, ospfNewCfgAreaAuthType INTEGER, ospfNewCfgAreaType INTEGER, ospfNewCfgAreaMetric INTEGER, ospfNewCfgAreaStatus INTEGER, ospfNewCfgAreaDelete INTEGER } ospfNewCfgAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF area table is related." ::= { ospfNewCfgAreaEntry 1} ospfNewCfgAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPF area." ::= { ospfNewCfgAreaEntry 2 } ospfNewCfgAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The SPF interval for the OSPF area." ::= { ospfNewCfgAreaEntry 3 } ospfNewCfgAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication." ::= { ospfNewCfgAreaEntry 4 } ospfNewCfgAreaType OBJECT-TYPE SYNTAX INTEGER { transit(0), stub(1), nssa(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Area. transit(0) stub(1) nssa(2)" ::= { ospfNewCfgAreaEntry 5 } ospfNewCfgAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Metric (1-65535)" ::= { ospfNewCfgAreaEntry 6 } ospfNewCfgAreaStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status disabled(0) enabled(1)" ::= { ospfNewCfgAreaEntry 7 } ospfNewCfgAreaDelete OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete the area no(0), yes(1)" ::= { ospfNewCfgAreaEntry 8 } -- OSPF Host Table ospfCurCfgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Host configuration." ::= { ospfCfg 12 } ospfCurCfgHostEntry OBJECT-TYPE SYNTAX OspfCurCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF host." INDEX { ospfCurCfgHostIndex, ospfCurCfgHostIpAddr } ::= { ospfCurCfgHostTable 1 } OspfCurCfgHostEntry ::= SEQUENCE { ospfCurCfgHostIndex Integer32, ospfCurCfgHostIpAddr IpAddress, ospfCurCfgHostAreaIndex Integer32, ospfCurCfgHostCost INTEGER, ospfCurCfgHostState INTEGER } ospfCurCfgHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF host number for which the OSPF host table is related." ::= { ospfCurCfgHostEntry 1} ospfCurCfgHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF host." ::= { ospfCurCfgHostEntry 2 } ospfCurCfgHostAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ospfCurCfgHostEntry 3 } ospfCurCfgHostCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of the OSPF host." ::= { ospfCurCfgHostEntry 4 } ospfCurCfgHostState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable an OSPF Host" ::= { ospfCurCfgHostEntry 5 } ospfNewCfgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Host configuration." ::= { ospfCfg 13 } ospfNewCfgHostEntry OBJECT-TYPE SYNTAX OspfNewCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF host." INDEX { ospfNewCfgHostIndex, ospfNewCfgHostIpAddr } ::= { ospfNewCfgHostTable 1 } OspfNewCfgHostEntry ::= SEQUENCE { ospfNewCfgHostIndex Integer32, ospfNewCfgHostIpAddr IpAddress, ospfNewCfgHostAreaIndex Integer32, ospfNewCfgHostCost INTEGER, ospfNewCfgHostState INTEGER, ospfNewCfgHostDelete INTEGER } ospfNewCfgHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF host number for which the OSPF host table is related." ::= { ospfNewCfgHostEntry 1} ospfNewCfgHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPF host." ::= { ospfNewCfgHostEntry 2 } ospfNewCfgHostAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF area index." ::= { ospfNewCfgHostEntry 3 } ospfNewCfgHostCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The cost of the OSPF host." ::= { ospfNewCfgHostEntry 4 } ospfNewCfgHostState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable an OSPF Host" ::= { ospfNewCfgHostEntry 5 } ospfNewCfgHostDelete OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete the OSPF host: no(0), yes(1)" ::= { ospfNewCfgHostEntry 6 } ospfMdkeyTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Mdkey table." ::= { ospfCfg 11 } ospfCurCfgMdkeyTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF MD5 keys in the current_config." ::= { ospfCfg 5 } ospfCurCfgMdkeyEntry OBJECT-TYPE SYNTAX OspfCurCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF MD keys table." INDEX { ospfCurCfgMdkeyIndex } ::= { ospfCurCfgMdkeyTable 1 } OspfCurCfgMdkeyEntry ::= SEQUENCE { ospfCurCfgMdkeyIndex Integer32, ospfCurCfgMdkeyKey DisplayString } ospfCurCfgMdkeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF MD5 Key number for which the OSPF MdKey table is related." ::= { ospfCurCfgMdkeyEntry 1} ospfCurCfgMdkeyKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string representing the MD5 Key." ::= { ospfCurCfgMdkeyEntry 2 } ospfNewCfgMdkeyTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF MD5 keys in the new_config." ::= { ospfCfg 6 } ospfNewCfgMdkeyEntry OBJECT-TYPE SYNTAX OspfNewCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF MD keys table." INDEX { ospfNewCfgMdkeyIndex } ::= { ospfNewCfgMdkeyTable 1 } OspfNewCfgMdkeyEntry ::= SEQUENCE { ospfNewCfgMdkeyIndex Integer32, ospfNewCfgMdkeyKey DisplayString, ospfNewCfgMdkeyDelete INTEGER } ospfNewCfgMdkeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF MD5 Key number for which the OSPF MdKey table is related." ::= { ospfNewCfgMdkeyEntry 1} ospfNewCfgMdkeyKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The character string representing the MD5 Key." ::= { ospfNewCfgMdkeyEntry 2 } ospfNewCfgMdkeyDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgMdkeyEntry 3} ospfCurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface configuration in the current_config." ::= { ospfCfg 7 } ospfCurCfgIntfEntry OBJECT-TYPE SYNTAX OspfCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF Interface." INDEX { ospfCurCfgIntfIndex } ::= { ospfCurCfgIntfTable 1 } OspfCurCfgIntfEntry ::= SEQUENCE { ospfCurCfgIntfIndex Integer32, ospfCurCfgIntfId IpAddress, ospfCurCfgIntfArea INTEGER, ospfCurCfgIntfMdkey INTEGER, ospfCurCfgIntfCost INTEGER, ospfCurCfgIntfPrio INTEGER, ospfCurCfgIntfHello INTEGER, ospfCurCfgIntfDead INTEGER, ospfCurCfgIntfTrans INTEGER, ospfCurCfgIntfRetra INTEGER, ospfCurCfgIntfAuthKey DisplayString, ospfCurCfgIntfStatus INTEGER } ospfCurCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which the OSPF Interface table is related." ::= { ospfCurCfgIntfEntry 1} ospfCurCfgIntfId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF interface." ::= { ospfCurCfgIntfEntry 2 } ospfCurCfgIntfArea OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the area that the interface belongs" ::= { ospfCurCfgIntfEntry 3 } ospfCurCfgIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key for the OSPF interface 0 (none) no MD5 authentication." ::= { ospfCurCfgIntfEntry 4 } ospfCurCfgIntfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface cost" ::= { ospfCurCfgIntfEntry 5 } ospfCurCfgIntfPrio OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface router priority" ::= { ospfCurCfgIntfEntry 6 } ospfCurCfgIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval" ::= { ospfCurCfgIntfEntry 7 } ospfCurCfgIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval" ::= { ospfCurCfgIntfEntry 8 } ospfCurCfgIntfTrans OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay" ::= { ospfCurCfgIntfEntry 9 } ospfCurCfgIntfRetra OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval" ::= { ospfCurCfgIntfEntry 10 } ospfCurCfgIntfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Key" ::= { ospfCurCfgIntfEntry 11 } ospfCurCfgIntfStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the interface disabled(0), enabled(1)" ::= { ospfCurCfgIntfEntry 12 } ospfNewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface configuration in the new_config." ::= { ospfCfg 8 } ospfNewCfgIntfEntry OBJECT-TYPE SYNTAX OspfNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF Interface." INDEX { ospfNewCfgIntfIndex } ::= { ospfNewCfgIntfTable 1 } OspfNewCfgIntfEntry ::= SEQUENCE { ospfNewCfgIntfIndex Integer32, ospfNewCfgIntfId IpAddress, ospfNewCfgIntfArea INTEGER, ospfNewCfgIntfMdkey INTEGER, ospfNewCfgIntfCost INTEGER, ospfNewCfgIntfPrio INTEGER, ospfNewCfgIntfHello INTEGER, ospfNewCfgIntfDead INTEGER, ospfNewCfgIntfTrans INTEGER, ospfNewCfgIntfRetra INTEGER, ospfNewCfgIntfAuthKey DisplayString, ospfNewCfgIntfStatus INTEGER, ospfNewCfgIntfDelete INTEGER } ospfNewCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which the OSPF Interface table is related." ::= { ospfNewCfgIntfEntry 1} ospfNewCfgIntfId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF interface." ::= { ospfNewCfgIntfEntry 2 } ospfNewCfgIntfArea OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the area that the interface belongs (0..2)" ::= { ospfNewCfgIntfEntry 3 } ospfNewCfgIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The MD5 key for the OSPF interface 0 (none) no MD5 authentication." ::= { ospfNewCfgIntfEntry 4 } ospfNewCfgIntfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Interface cost(1..65535)" ::= { ospfNewCfgIntfEntry 5 } ospfNewCfgIntfPrio OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Interface router priority(0..255)" ::= { ospfNewCfgIntfEntry 6 } ospfNewCfgIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Hello interval(1..65535)" ::= { ospfNewCfgIntfEntry 7 } ospfNewCfgIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Dead interval(1..65535)" ::= { ospfNewCfgIntfEntry 8 } ospfNewCfgIntfTrans OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Transit delay(1..3600)" ::= { ospfNewCfgIntfEntry 9 } ospfNewCfgIntfRetra OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Retransmit interval(1..3600)" ::= { ospfNewCfgIntfEntry 10 } ospfNewCfgIntfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Authentication Key" ::= { ospfNewCfgIntfEntry 11 } ospfNewCfgIntfStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the interface disabled(0), enabled(1)" ::= { ospfNewCfgIntfEntry 12 } ospfNewCfgIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(0), delete(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete the interface other(0), delete(1)" ::= { ospfNewCfgIntfEntry 13 } ospfCurCfgVirtIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Virtual Interface configuration in the current_config." ::= { ospfCfg 9 } ospfCurCfgVirtIntfEntry OBJECT-TYPE SYNTAX OspfCurCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF virtual Interface." INDEX { ospfCurCfgVirtIntfIndex } ::= { ospfCurCfgVirtIntfTable 1 } OspfCurCfgVirtIntfEntry ::= SEQUENCE { ospfCurCfgVirtIntfIndex Integer32, ospfCurCfgVirtIntfAreaId INTEGER, ospfCurCfgVirtIntfNbr IpAddress, ospfCurCfgVirtIntfMdkey INTEGER, ospfCurCfgVirtIntfHello INTEGER, ospfCurCfgVirtIntfDead INTEGER, ospfCurCfgVirtIntfTrans INTEGER, ospfCurCfgVirtIntfRetra INTEGER, ospfCurCfgVirtIntfAuthKey DisplayString, ospfCurCfgVirtIntfStatus INTEGER } ospfCurCfgVirtIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related." ::= { ospfCurCfgVirtIntfEntry 1} ospfCurCfgVirtIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF area to which this virtual interface belongs." ::= { ospfCurCfgVirtIntfEntry 2 } ospfCurCfgVirtIntfNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF neighbor for this virtual interface." ::= { ospfCurCfgVirtIntfEntry 3 } ospfCurCfgVirtIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication." ::= { ospfCurCfgVirtIntfEntry 4 } ospfCurCfgVirtIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval" ::= { ospfCurCfgVirtIntfEntry 5 } ospfCurCfgVirtIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval" ::= { ospfCurCfgVirtIntfEntry 6 } ospfCurCfgVirtIntfTrans OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay" ::= { ospfCurCfgVirtIntfEntry 7 } ospfCurCfgVirtIntfRetra OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval" ::= { ospfCurCfgVirtIntfEntry 8 } ospfCurCfgVirtIntfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Key" ::= { ospfCurCfgVirtIntfEntry 9 } ospfCurCfgVirtIntfStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status disabled(0), enabled(1)" ::= { ospfCurCfgVirtIntfEntry 10 } ospfNewCfgVirtIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Virtual Interface configuration in the new_config." ::= { ospfCfg 10 } ospfNewCfgVirtIntfEntry OBJECT-TYPE SYNTAX OspfNewCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF virtual Interface." INDEX { ospfNewCfgVirtIntfIndex } ::= { ospfNewCfgVirtIntfTable 1 } OspfNewCfgVirtIntfEntry ::= SEQUENCE { ospfNewCfgVirtIntfIndex Integer32, ospfNewCfgVirtIntfAreaId INTEGER, ospfNewCfgVirtIntfNbr IpAddress, ospfNewCfgVirtIntfMdkey INTEGER, ospfNewCfgVirtIntfHello INTEGER, ospfNewCfgVirtIntfDead INTEGER, ospfNewCfgVirtIntfTrans INTEGER, ospfNewCfgVirtIntfRetra INTEGER, ospfNewCfgVirtIntfAuthKey DisplayString, ospfNewCfgVirtIntfStatus INTEGER, ospfNewCfgVirtIntfDelete INTEGER } ospfNewCfgVirtIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related." ::= { ospfNewCfgVirtIntfEntry 1} ospfNewCfgVirtIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the OSPF area to which this virtual interface belongs." ::= { ospfNewCfgVirtIntfEntry 2 } ospfNewCfgVirtIntfNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPF neighbor for this virtual interface." ::= { ospfNewCfgVirtIntfEntry 3 } ospfNewCfgVirtIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication." ::= { ospfNewCfgVirtIntfEntry 4 } ospfNewCfgVirtIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Hello interval(1..65535)" ::= { ospfNewCfgVirtIntfEntry 5 } ospfNewCfgVirtIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Dead interval(1..65535)" ::= { ospfNewCfgVirtIntfEntry 6 } ospfNewCfgVirtIntfTrans OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Transit dela(1..3600)y" ::= { ospfNewCfgVirtIntfEntry 7 } ospfNewCfgVirtIntfRetra OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Retransmit interval(1..3600)" ::= { ospfNewCfgVirtIntfEntry 8 } ospfNewCfgVirtIntfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Authentication Key SIZE(0..8)" ::= { ospfNewCfgVirtIntfEntry 9 } ospfNewCfgVirtIntfStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Status disabled(0), enabled(1) " ::= { ospfNewCfgVirtIntfEntry 10 } ospfNewCfgVirtIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(0), delete(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete other(0), delete(1)" ::= { ospfNewCfgVirtIntfEntry 11 } -- ospf range ospfCurCfgRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF summary range in the current configuration." ::= { ospfCfg 14 } ospfCurCfgRangeEntry OBJECT-TYPE SYNTAX OspfCurCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF summary range." INDEX { ospfCurCfgRangeIndex } ::= { ospfCurCfgRangeTable 1 } OspfCurCfgRangeEntry ::= SEQUENCE { ospfCurCfgRangeIndex Integer32, ospfCurCfgRangeAddr IpAddress, ospfCurCfgRangeMask IpAddress, ospfCurCfgRangeAreaIndex Integer32, ospfCurCfgRangeHideState INTEGER, ospfCurCfgRangeState INTEGER } ospfCurCfgRangeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPF summary range table is related." ::= { ospfCurCfgRangeEntry 1} ospfCurCfgRangeAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the range." ::= { ospfCurCfgRangeEntry 2 } ospfCurCfgRangeMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of the range." ::= { ospfCurCfgRangeEntry 3 } ospfCurCfgRangeAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ospfCurCfgRangeEntry 4 } ospfCurCfgRangeHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the hide range." ::= { ospfCurCfgRangeEntry 5 } ospfCurCfgRangeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the range." ::= { ospfCurCfgRangeEntry 6 } ospfNewCfgRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF summary range in the new configuration." ::= { ospfCfg 15 } ospfNewCfgRangeEntry OBJECT-TYPE SYNTAX OspfNewCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF summary range." INDEX { ospfNewCfgRangeIndex } ::= { ospfNewCfgRangeTable 1 } OspfNewCfgRangeEntry ::= SEQUENCE { ospfNewCfgRangeIndex Integer32, ospfNewCfgRangeAddr IpAddress, ospfNewCfgRangeMask IpAddress, ospfNewCfgRangeAreaIndex Integer32, ospfNewCfgRangeHideState INTEGER, ospfNewCfgRangeState INTEGER, ospfNewCfgRangeDelete INTEGER } ospfNewCfgRangeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPF summary range table is related." ::= { ospfNewCfgRangeEntry 1} ospfNewCfgRangeAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the range." ::= { ospfNewCfgRangeEntry 2 } ospfNewCfgRangeMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The mask of the range." ::= { ospfNewCfgRangeEntry 3 } ospfNewCfgRangeAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The area index." ::= { ospfNewCfgRangeEntry 4 } ospfNewCfgRangeHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the hide range." ::= { ospfNewCfgRangeEntry 5 } ospfNewCfgRangeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the range." ::= { ospfNewCfgRangeEntry 6 } ospfNewCfgRangeDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgRangeEntry 7 } ospfRouteRedistribution OBJECT IDENTIFIER ::= { ospfCfg 4 } ospfRedistributeStatic OBJECT IDENTIFIER ::= { ospfRouteRedistribution 1 } ospfCurCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ospfRedistributeStatic 1 } ospfNewCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ospfRedistributeStatic 2 } ospfCurCfgStaticMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ospfRedistributeStatic 3 } ospfNewCfgStaticMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ospfRedistributeStatic 4 } ospfCurCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeStatic 5 } ospfNewCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeStatic 6 } ospfNewCfgStaticAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeStatic 7 } ospfNewCfgStaticRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeStatic 8 } ospfRedistributeFixed OBJECT IDENTIFIER ::= { ospfRouteRedistribution 4 } ospfCurCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ospfRedistributeFixed 1 } ospfNewCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ospfRedistributeFixed 2 } ospfCurCfgFixedMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ospfRedistributeFixed 3 } ospfNewCfgFixedMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ospfRedistributeFixed 4 } ospfCurCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeFixed 5 } ospfNewCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeFixed 6 } ospfNewCfgFixedAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeFixed 7 } ospfNewCfgFixedRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeFixed 8 } ospfRedistributeRip OBJECT IDENTIFIER ::= { ospfRouteRedistribution 5 } ospfCurCfgRipMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ospfRedistributeRip 1 } ospfNewCfgRipMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ospfRedistributeRip 2 } ospfCurCfgRipMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ospfRedistributeRip 3 } ospfNewCfgRipMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ospfRedistributeRip 4 } ospfCurCfgRipOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeRip 5 } ospfNewCfgRipOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeRip 6 } ospfNewCfgRipAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeRip 7 } ospfNewCfgRipRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeRip 8 } ipCurCfgRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router ID of the switch." ::= { ipGeneralCfg 1 } ipNewCfgRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The router ID of the switch." ::= { ipGeneralCfg 2 } -- IGMP Snooping config igmpCurCfgOnOff OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Globally turn IGMP On/Off." ::= { igmpCfg 1} igmpNewCfgOnOff OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn IGMP On/Off." ::= { igmpCfg 2} igmpSnoopCfgGen OBJECT IDENTIFIER ::= { igmpCfg 3 } igmpStaticMrtrCfg OBJECT IDENTIFIER ::= { igmpCfg 4 } igmpFilterCfg OBJECT IDENTIFIER ::= { igmpCfg 5 } igmpSnoopCfg OBJECT IDENTIFIER ::= { igmpSnoopCfgGen 1 } igmpSnoopCurCfgTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Set IGMP Report timeout." ::= { igmpSnoopCfg 1 } igmpSnoopNewCfgTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set IGMP Report timeout." ::= { igmpSnoopCfg 2 } igmpSnoopCurCfgMrto OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of multicast router timeout in the current config." ::= { igmpSnoopCfg 3 } igmpSnoopNewCfgMrto OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of multicast router timeout in the new config." ::= { igmpSnoopCfg 4 } igmpSnoopNewCfgVlanFastlvAdd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN to be added to fastleave vlan list. When read, 0 is returned." ::= { igmpSnoopCfg 12 } igmpSnoopNewCfgVlanFastlvRem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN to be removed from fastleave vlan list. When read, 0 is returned." ::= { igmpSnoopCfg 13 } igmpSnoopCurCfgVlanFastlvBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled." ::= { igmpSnoopCfg 14 } igmpSnoopNewCfgVlanFastlvBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled." ::= { igmpSnoopCfg 15 } igmpSnoopCurCfgRobust OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of expected packet loss on subnet in the current config." ::= { igmpSnoopCfg 16 } igmpSnoopNewCfgRobust OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of expected packet loss on subnet in the new config." ::= { igmpSnoopCfg 17 } igmpSnoopNewCfgVlanAdd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN to be added to snooping vlan list. When read, 0 is returned." ::= { igmpSnoopCfg 18 } igmpSnoopNewCfgVlanRem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN to be removed from snooping vlan list. When read, 0 is returned." ::= { igmpSnoopCfg 19 } igmpSnoopNewCfgVlanClear OBJECT-TYPE SYNTAX INTEGER { clear(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Removing ALL Snooping Vlans." ::= { igmpSnoopCfg 20 } igmpSnoopCurCfgVlanBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled." ::= { igmpSnoopCfg 21 } igmpSnoopNewCfgVlanBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled." ::= { igmpSnoopCfg 22 } igmpSnoopCurCfgQInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP Query Interval of current config." ::= { igmpSnoopCfg 23 } igmpSnoopNewCfgQInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "IGMP Query Interval of new config." ::= { igmpSnoopCfg 24 } igmpSnoopCurCfgSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source ip for GSQ proxy in current config." ::= { igmpSnoopCfg 25 } igmpSnoopNewCfgSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip for GSQ proxy in new config." ::= { igmpSnoopCfg 26 } igmpSnoopCurCfgAggrEnaDis OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable of IGMP Report aggregation." ::= { igmpSnoopCfg 27} igmpSnoopNewCfgAggrEnaDis OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable of IGMP Report aggregation." ::= { igmpSnoopCfg 28} -- IGMP Static Mrtr Support igmpStaticMrtrCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP Static Multicast Router table in the current configuration block." ::= { igmpStaticMrtrCfg 1 } igmpStaticMrtrCurCfgTableEntry OBJECT-TYPE SYNTAX IgmpStaticMrtrCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Static Multicast Router table." INDEX { igmpStaticMrtrCurCfgIndx } ::= { igmpStaticMrtrCurCfgTable 1 } IgmpStaticMrtrCurCfgTableEntry ::= SEQUENCE { igmpStaticMrtrCurCfgIndx Integer32, igmpStaticMrtrCurCfgPortId Integer32, igmpStaticMrtrCurCfgVlanId Integer32, igmpStaticMrtrCurCfgVersion INTEGER } igmpStaticMrtrCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP Multicast Router table port index." ::= { igmpStaticMrtrCurCfgTableEntry 1 } igmpStaticMrtrCurCfgPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP Multicast Router port in the current configuration block." ::= { igmpStaticMrtrCurCfgTableEntry 2 } igmpStaticMrtrCurCfgVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP Multicast Router port in the current configuration block." ::= { igmpStaticMrtrCurCfgTableEntry 3 } igmpStaticMrtrCurCfgVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP version of the IGMP Static Multicast Router." ::= { igmpStaticMrtrCurCfgTableEntry 4 } igmpStaticMrtrNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP Static Multicast Router table in the new configuration block." ::= { igmpStaticMrtrCfg 2 } igmpStaticMrtrNewCfgTableEntry OBJECT-TYPE SYNTAX IgmpStaticMrtrNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Static Multicast Router table." INDEX { igmpStaticMrtrNewCfgIndx } ::= { igmpStaticMrtrNewCfgTable 1 } IgmpStaticMrtrNewCfgTableEntry ::= SEQUENCE { igmpStaticMrtrNewCfgIndx Integer32, igmpStaticMrtrNewCfgPortId Integer32, igmpStaticMrtrNewCfgVlanId Integer32, igmpStaticMrtrNewCfgVersion INTEGER, igmpStaticMrtrNewCfgDelete INTEGER } igmpStaticMrtrNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP Multicast Router table port index." ::= { igmpStaticMrtrNewCfgTableEntry 1 } igmpStaticMrtrNewCfgPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IGMP Multicast Router port in the new configuration block." ::= { igmpStaticMrtrNewCfgTableEntry 2 } igmpStaticMrtrNewCfgVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IGMP Multicast Router port in the new configuration block." ::= { igmpStaticMrtrNewCfgTableEntry 3 } igmpStaticMrtrNewCfgVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The IGMP version of the IGMP Static Multicast Router." ::= { igmpStaticMrtrNewCfgTableEntry 4 } igmpStaticMrtrNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { igmpStaticMrtrNewCfgTableEntry 5 } -- IGMP Filtering igmpFltCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFltCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP filtering table in the current configuration block." ::= { igmpFilterCfg 1 } igmpFltCurCfgTableEntry OBJECT-TYPE SYNTAX IgmpFltCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the filtering table." INDEX { igmpFltCurCfgIndx } ::= { igmpFltCurCfgTable 1 } IgmpFltCurCfgTableEntry ::= SEQUENCE { igmpFltCurCfgIndx Integer32, igmpFltCurCfgMcastIp1 IpAddress, igmpFltCurCfgMcastIp2 IpAddress, igmpFltCurCfgAction INTEGER, igmpFltCurCfgState INTEGER } igmpFltCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP filter table index." ::= { igmpFltCurCfgTableEntry 1 } igmpFltCurCfgMcastIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Range1 Multicast IP address to be filtered." ::= { igmpFltCurCfgTableEntry 2 } igmpFltCurCfgMcastIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Range2 Multicast IP address to be filtered." ::= { igmpFltCurCfgTableEntry 3 } igmpFltCurCfgAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action for the IGMP filtering rule." ::= { igmpFltCurCfgTableEntry 4 } igmpFltCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this IGMP filtering rule." ::= { igmpFltCurCfgTableEntry 5 } igmpFltNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFltNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP filtering table in the current configuration block." ::= { igmpFilterCfg 2 } igmpFltNewCfgTableEntry OBJECT-TYPE SYNTAX IgmpFltNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the filtering table." INDEX { igmpFltNewCfgIndx } ::= { igmpFltNewCfgTable 1 } IgmpFltNewCfgTableEntry ::= SEQUENCE { igmpFltNewCfgIndx Integer32, igmpFltNewCfgMcastIp1 IpAddress, igmpFltNewCfgMcastIp2 IpAddress, igmpFltNewCfgAction INTEGER, igmpFltNewCfgState INTEGER, igmpFltNewCfgDelete INTEGER } igmpFltNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IGMP filter table index." ::= { igmpFltNewCfgTableEntry 1 } igmpFltNewCfgMcastIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Range1 Multicast source IP address to be filtered." ::= { igmpFltNewCfgTableEntry 2 } igmpFltNewCfgMcastIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Range2 Multicast source IP address to be filtered." ::= { igmpFltNewCfgTableEntry 3 } igmpFltNewCfgAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The action for the IGMP filtering rule." ::= { igmpFltNewCfgTableEntry 4 } igmpFltNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of this IGMP filtering rule." ::= { igmpFltNewCfgTableEntry 5 } igmpFltNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { igmpFltNewCfgTableEntry 6 } -- IGMP Filtering Port Table igmpFltCurCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFltCurCfgPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP filtering port table in the current configuration block." ::= { igmpFilterCfg 3 } igmpFltCurCfgPortTableEntry OBJECT-TYPE SYNTAX IgmpFltCurCfgPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IGMP filtering port table." INDEX { igmpFltCurCfgPortIndx } ::= { igmpFltCurCfgPortTable 1 } IgmpFltCurCfgPortTableEntry ::= SEQUENCE { igmpFltCurCfgPortIndx Integer32, igmpFltCurCfgPortState INTEGER, igmpFltCurCfgPortFiltBmap OCTET STRING } igmpFltCurCfgPortIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { igmpFltCurCfgPortTableEntry 1 } igmpFltCurCfgPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable IGMP filtering." ::= { igmpFltCurCfgPortTableEntry 2 } igmpFltCurCfgPortFiltBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to igmpFltCurCfgTable) where x : 1 - The represented IGMP filter rule applied to the port 0 - The represented IGMP filter rule not applied to the port " ::= { igmpFltCurCfgPortTableEntry 3 } igmpFltNewCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFltNewCfgPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP filtering port table in the new configuration block." ::= { igmpFilterCfg 4 } igmpFltNewCfgPortTableEntry OBJECT-TYPE SYNTAX IgmpFltNewCfgPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IGMP filtering port table." INDEX { igmpFltNewCfgPortIndx } ::= { igmpFltNewCfgPortTable 1 } IgmpFltNewCfgPortTableEntry ::= SEQUENCE { igmpFltNewCfgPortIndx Integer32, igmpFltNewCfgPortState INTEGER, igmpFltNewCfgPortFiltBmap OCTET STRING, igmpFltNewCfgPortAddFiltRule Integer32, igmpFltNewCfgPortRemFiltRule Integer32 } igmpFltNewCfgPortIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { igmpFltNewCfgPortTableEntry 1 } igmpFltNewCfgPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable IGMP filtering." ::= { igmpFltNewCfgPortTableEntry 2 } igmpFltNewCfgPortFiltBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port " ::= { igmpFltNewCfgPortTableEntry 3 } igmpFltNewCfgPortAddFiltRule OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always." ::= { igmpFltNewCfgPortTableEntry 4 } igmpFltNewCfgPortRemFiltRule OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always." ::= { igmpFltNewCfgPortTableEntry 5 } igmpFltCurCfgEnaDis OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable of IGMP Filtering." ::= { igmpFilterCfg 5 } igmpFltNewCfgEnaDis OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable of IGMP Filtering." ::= { igmpFilterCfg 6 } -- Statistics -- RIP Statistics Group ripStatInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good RIP packets recieved." ::= { ripStats 1 } ripStatOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets transmitted." ::= { ripStats 2 } ripStatInErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error RIP packets recieved." ::= { ripStats 3 } ripStatRoutesAgedOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP routes which have aged out." ::= { ripStats 4 } -- RIPv2 Statistics ripStatInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets recieved." ::= { rip2Stats 1 } ripStatOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets transmitted." ::= { rip2Stats 2 } ripStatInRequestPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP requests recieved." ::= { rip2Stats 3 } ripStatInResponsePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP response recieved." ::= { rip2Stats 4 } ripStatOutRequestPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP requests transmitted." ::= { rip2Stats 5 } ripStatOutResponsePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP responses transmitted." ::= { rip2Stats 6 } ripStatRouteTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP route timeouts." ::= { rip2Stats 7 } ripStatInBadSizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bad size RIP packets recieved." ::= { rip2Stats 8 } ripStatInBadVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP bad versions recieved." ::= { rip2Stats 9 } ripStatInBadZeros OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP bad zeros recieved." ::= { rip2Stats 10 } ripStatInBadSourcePort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP bad source port recieved." ::= { rip2Stats 11 } ripStatInBadSourceIP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP bad source IP recieved." ::= { rip2Stats 12 } ripStatInSelfRcvPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets from self received." ::= { rip2Stats 13 } --DNS Statistics dnsStatInGoodDnsRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good DNS request packets received." ::= { dnsStats 1 } dnsStatOutDnsRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DNS request packets" ::= { dnsStats 2 } dnsStatInBadDnsRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bad DNS request packets received" ::= { dnsStats 3 } -- GEAL3 Stats maxL3TableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max L3 table size" ::= {geal3Stats 1} noL3EntriesUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of L3 entries used" ::= {geal3Stats 2} maxLpmTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max LPM table size" ::= {geal3Stats 3} noLpmEntriesUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LPM entries used" ::= {geal3Stats 4} maxBlockInLpmTable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of blocks in LPM table" ::= {geal3Stats 5} noBlocksUsedInLpmTable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of blocks used in LPM table" ::= {geal3Stats 6} -- ARP Statistics Group arpStatEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of ARP entries." ::= { arpStats 1 } arpStatHighWater OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of ARP entries." ::= { arpStats 2 } arpStatMaxEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of ARP entries." ::= { arpStats 3 } -- ROUTE Statistics Group routeStatEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of IP routes." ::= { routeStats 1 } routeStatHighWater OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of IP routes." ::= { routeStats 2 } routeStatMaxEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of IP routes." ::= { routeStats 3 } -- The VRRP Statistics vrrpStatInAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good VRRP advertisements which are received." ::= { vrrpStats 1 } vrrpStatOutAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good VRRP advertisements which are transmitted." ::= { vrrpStats 2 } vrrpStatOutBadAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP advertisements which are received." ::= { vrrpStats 3 } vrrpStatBadVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP version adv which are received." ::= { vrrpStats 4 } vrrpStatBadAddress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP addres adv which are received." ::= { vrrpStats 5 } vrrpStatBadPassword OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP advertisements which are received." ::= { vrrpStats 6 } vrrpStatBadVrid OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP version ID adv which are received." ::= { vrrpStats 7 } vrrpStatBadData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP advertisements which are received." ::= { vrrpStats 8 } vrrpStatBadInterval OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP iutervals which are received." ::= { vrrpStats 9 } -- Clear Statistics for ip and ip interface ipClearStats OBJECT-TYPE SYNTAX INTEGER { clear(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(1) results in clearing the IP statistics." ::= { clearStats 1 } ifStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Interface Statistics." ::= { clearStats 2 } ifStatsEntry OBJECT-TYPE SYNTAX IfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Interface statistics." INDEX { ifStatsIndex } ::= { ifStatsTable 1 } IfStatsEntry ::= SEQUENCE { ifStatsIndex Integer32, ifClearStats INTEGER } ifStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the IP interface for which these statistics apply." ::= { ifStatsEntry 1 } ifClearStats OBJECT-TYPE SYNTAX INTEGER { clear(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(1) results in clearing the statistics for this IP interface (if) stats." ::= { ifStatsEntry 2 } -- igmp stats igmpClearAllStats OBJECT-TYPE SYNTAX INTEGER { clear(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(1) results in clearing the IGMP statistics." ::= { igmpStats 2 } -- Ospf Statistics -- Ospf Statistics for all interfaces and OSPF areas ospfGeneralStats OBJECT IDENTIFIER ::= { ospfStats 1 } ospfCumRxTxStats OBJECT IDENTIFIER ::= { ospfGeneralStats 1 } ospfCumNbrChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 2 } ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 3 } ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats 4 } -- Ospf Statistics / Area ospfArea OBJECT IDENTIFIER ::= { ospfStats 2 } ospfAreaRxTxStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Rx/Tx Statistics." ::= { ospfArea 1 } ospfAreaRxTxStatsEntry OBJECT-TYPE SYNTAX OspfAreaRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rx Tx packet Statistics about a OSPF area." INDEX { ospfAreaRxTxIndex } ::= { ospfAreaRxTxStats 1 } OspfAreaRxTxStatsEntry ::= SEQUENCE { ospfAreaRxTxIndex Integer32, ospfAreaRxPkts Counter32, ospfAreaTxPkts Counter32, ospfAreaRxHello Counter32, ospfAreaTxHello Counter32, ospfAreaRxDatabase Counter32, ospfAreaTxDatabase Counter32, ospfAreaRxlsReqs Counter32, ospfAreaTxlsReqs Counter32, ospfAreaRxlsAcks Counter32, ospfAreaTxlsAcks Counter32, ospfAreaRxlsUpdates Counter32, ospfAreaTxlsUpdates Counter32 } ospfAreaRxTxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ospf Area for which these statistics apply." ::= { ospfAreaRxTxStatsEntry 1 } ospfAreaRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets received in this OSPF area." ::= { ospfAreaRxTxStatsEntry 2 } ospfAreaTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets transmitted in this OSPF area." ::= { ospfAreaRxTxStatsEntry 3 } ospfAreaRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received in this OSPF area." ::= { ospfAreaRxTxStatsEntry 4 } ospfAreaTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets transmitted in this OSPF area." ::= { ospfAreaRxTxStatsEntry 5 } ospfAreaRxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 6 } ospfAreaTxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 7 } ospfAreaRxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets received for this OSPF area." ::= { ospfAreaRxTxStatsEntry 8 } ospfAreaTxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 9 } ospfAreaRxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets received for this OSPF area." ::= { ospfAreaRxTxStatsEntry 10 } ospfAreaTxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 11 } ospfAreaRxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets received for this OSPF area." ::= { ospfAreaRxTxStatsEntry 12 } ospfAreaTxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 13 } ospfAreaNbrChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Neighbour Statistics." ::= { ospfArea 2 } ospfAreaNbrChangeStatsEntry OBJECT-TYPE SYNTAX OspfAreaNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area Neighbour Change Statistics about a OSPF area." INDEX { ospfAreaNbrIndex } ::= { ospfAreaNbrChangeStats 1 } OspfAreaNbrChangeStatsEntry ::= SEQUENCE { ospfAreaNbrIndex Integer32, ospfAreaNbrhello Counter32, ospfAreaNbrStart Counter32, ospfAreaNbrAdjointOk Counter32, ospfAreaNbrNegotiationDone Counter32, ospfAreaNbrExchangeDone Counter32, ospfAreaNbrBadRequests Counter32, ospfAreaNbrBadSequence Counter32, ospfAreaNbrLoadingDone Counter32, ospfAreaNbrN1way Counter32, ospfAreaNbrRstAd Counter32, ospfAreaNbrDown Counter32, ospfAreaNbrN2way Counter32 } ospfAreaNbrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ospf Area for which these statistics apply." ::= { ospfAreaNbrChangeStatsEntry 1 } ospfAreaNbrhello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 2 } ospfAreaNbrStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 3 } ospfAreaNbrAdjointOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 4 } ospfAreaNbrNegotiationDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 5 } ospfAreaNbrExchangeDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 6 } ospfAreaNbrBadRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 7 } ospfAreaNbrBadSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 8 } ospfAreaNbrLoadingDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of link state updates received for all out-of-date portions of the database in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 9 } ospfAreaNbrN1way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 10 } ospfAreaNbrRstAd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Neighbour adjacency has been reset across this OPSF area." ::= { ospfAreaNbrChangeStatsEntry 11 } ospfAreaNbrDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 12 } ospfAreaNbrN2way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 13 } ospfAreaChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Change Statistics." ::= { ospfArea 3 } ospfAreaChangeStatsEntry OBJECT-TYPE SYNTAX OspfAreaChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area Change Statistics about a OSPF area." INDEX { ospfAreaIntfIndex } ::= { ospfAreaChangeStats 1 } OspfAreaChangeStatsEntry ::= SEQUENCE { ospfAreaIntfIndex Integer32, ospfAreaIntfHello Counter32, ospfAreaIntfDown Counter32, ospfAreaIntfLoop Counter32, ospfAreaIntfUnloop Counter32, ospfAreaIntfWaitTimer Counter32, ospfAreaIntfBackup Counter32, ospfAreaIntfNbrChange Counter32 } ospfAreaIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Area for which these statistics apply." ::= { ospfAreaChangeStatsEntry 1 } ospfAreaIntfHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets sent on this OSPF area." ::= { ospfAreaChangeStatsEntry 2 } ospfAreaIntfDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces down in this OSPF area." ::= { ospfAreaChangeStatsEntry 3 } ospfAreaIntfLoop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces no longer connected to the attatched network in this OSPF area." ::= { ospfAreaChangeStatsEntry 4 } ospfAreaIntfUnloop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces connected to the attatched network in this OSPF area.." ::= { ospfAreaChangeStatsEntry 5 } ospfAreaIntfWaitTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area." ::= { ospfAreaChangeStatsEntry 6 } ospfAreaIntfBackup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Backup Designated Routers on the attatched network for this OSPF area." ::= { ospfAreaChangeStatsEntry 7 } ospfAreaIntfNbrChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area." ::= { ospfAreaChangeStatsEntry 8 } ospfAreaErrorStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Error Statistics." ::= { ospfArea 4 } ospfAreaErrorStatsEntry OBJECT-TYPE SYNTAX OspfAreaErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Error Statistics for an OSPF area." INDEX { ospfAreaErrIndex } ::= { ospfAreaErrorStats 1 } OspfAreaErrorStatsEntry ::= SEQUENCE { ospfAreaErrIndex Integer32, ospfAreaErrAuthFailure Counter32, ospfAreaErrNetmaskMismatch Counter32, ospfAreaErrHelloMismatch Counter32, ospfAreaErrDeadMismatch Counter32, ospfAreaErrOptionsMismatch Counter32, ospfAreaErrUnknownNbr Counter32 } ospfAreaErrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Area for which these statistics apply." ::= { ospfAreaErrorStatsEntry 1 } ospfAreaErrAuthFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong password in this area." ::= { ospfAreaErrorStatsEntry 2 } ospfAreaErrNetmaskMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong netmask in this area." ::= { ospfAreaErrorStatsEntry 3 } ospfAreaErrHelloMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different hello interval in this area." ::= { ospfAreaErrorStatsEntry 4 } ospfAreaErrDeadMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different dead interval in this area." ::= { ospfAreaErrorStatsEntry 5 } ospfAreaErrOptionsMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different options in this area." ::= { ospfAreaErrorStatsEntry 6 } ospfAreaErrUnknownNbr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received from an unknown neighbor in this area." ::= { ospfAreaErrorStatsEntry 7 } -- Ospf Statistics / Interface ospfInterface OBJECT IDENTIFIER ::= { ospfStats 3 } ospfIntfRxTxStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Rx/Tx packet Statistics." ::= { ospfInterface 1 } ospfIntfRxTxStatsEntry OBJECT-TYPE SYNTAX OspfIntfRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF interface Rx/Tx packet statistics." INDEX { ospfIntfRxTxIndex } ::= { ospfIntfRxTxStats 1 } OspfIntfRxTxStatsEntry ::= SEQUENCE { ospfIntfRxTxIndex Integer32, ospfIntfRxPkts Counter32, ospfIntfTxPkts Counter32, ospfIntfRxHello Counter32, ospfIntfTxHello Counter32, ospfIntfRxDatabase Counter32, ospfIntfTxDatabase Counter32, ospfIntfRxlsReqs Counter32, ospfIntfTxlsReqs Counter32, ospfIntfRxlsAcks Counter32, ospfIntfTxlsAcks Counter32, ospfIntfRxlsUpdates Counter32, ospfIntfTxlsUpdates Counter32 } ospfIntfRxTxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF interface for which these statistics apply." ::= { ospfIntfRxTxStatsEntry 1 } ospfIntfRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 2 } ospfIntfTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 3 } ospfIntfRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 4 } ospfIntfTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 5 } ospfIntfRxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 6 } ospfIntfTxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 7 } ospfIntfRxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 8 } ospfIntfTxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 9 } ospfIntfRxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 10 } ospfIntfTxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 11 } ospfIntfRxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 12 } ospfIntfTxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 13 } ospfIntfNbrChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Neighbour change Statistics." ::= { ospfInterface 2 } ospfIntfNbrChangeStatsEntry OBJECT-TYPE SYNTAX OspfIntfNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF interface Neighbour Change statistics." INDEX { ospfIntfNbrIndex } ::= { ospfIntfNbrChangeStats 1 } OspfIntfNbrChangeStatsEntry ::= SEQUENCE { ospfIntfNbrIndex Integer32, ospfIntfNbrhello Counter32, ospfIntfNbrStart Counter32, ospfIntfNbrAdjointOk Counter32, ospfIntfNbrNegotiationDone Counter32, ospfIntfNbrExchangeDone Counter32, ospfIntfNbrBadRequests Counter32, ospfIntfNbrBadSequence Counter32, ospfIntfNbrLoadingDone Counter32, ospfIntfNbrN1way Counter32, ospfIntfNbrRstAd Counter32, ospfIntfNbrDown Counter32, ospfIntfNbrN2way Counter32 } ospfIntfNbrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Interface for which these statistics apply." ::= { ospfIntfNbrChangeStatsEntry 1 } ospfIntfNbrhello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours in this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 2 } ospfIntfNbrStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 3 } ospfIntfNbrAdjointOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 4 } ospfIntfNbrNegotiationDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 5 } ospfIntfNbrExchangeDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 6 } ospfIntfNbrBadRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface." ::= { ospfIntfNbrChangeStatsEntry 7 } ospfIntfNbrBadSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface." ::= { ospfIntfNbrChangeStatsEntry 8 } ospfIntfNbrLoadingDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of link state updates received for all out-of-date portions of the database for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 9 } ospfIntfNbrN1way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 10 } ospfIntfNbrRstAd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Neighbour adjacency has been reset on this interface." ::= { ospfIntfNbrChangeStatsEntry 11 } ospfIntfNbrDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface." ::= { ospfIntfNbrChangeStatsEntry 12 } ospfIntfNbrN2way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 13 } ospfIntfChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface change Statistics." ::= { ospfInterface 3 } ospfIntfChangeStatsEntry OBJECT-TYPE SYNTAX OspfIntfChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF interface Change statistics." INDEX { ospfIntfIndex } ::= { ospfIntfChangeStats 1 } OspfIntfChangeStatsEntry ::= SEQUENCE { ospfIntfIndex Integer32, ospfIntfHello Counter32, ospfIntfDown Counter32, ospfIntfLoop Counter32, ospfIntfUnloop Counter32, ospfIntfWaitTimer Counter32, ospfIntfBackup Counter32, ospfIntfNbrChange Counter32 } ospfIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Interface for which these statistics apply." ::= { ospfIntfChangeStatsEntry 1 } ospfIntfHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets sent by this interface." ::= { ospfIntfChangeStatsEntry 2 } ospfIntfDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the interface was down." ::= { ospfIntfChangeStatsEntry 3 } ospfIntfLoop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the interface was no longer connected to the attatched network." ::= { ospfIntfChangeStatsEntry 4 } ospfIntfUnloop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the interface, connected back to the attatched network." ::= { ospfIntfChangeStatsEntry 5 } ospfIntfWaitTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface." ::= { ospfIntfChangeStatsEntry 6 } ospfIntfBackup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Backup Designated Routers on the attatched network for this OSPF interface." ::= { ospfIntfChangeStatsEntry 7 } ospfIntfNbrChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface." ::= { ospfIntfChangeStatsEntry 8 } ospfIntfErrorStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Error Statistics." ::= { ospfInterface 4 } ospfIntfErrorStatsEntry OBJECT-TYPE SYNTAX OspfIntfErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Error Statistics for an OSPF area." INDEX { ospfIntfErrIndex } ::= { ospfIntfErrorStats 1 } OspfIntfErrorStatsEntry ::= SEQUENCE { ospfIntfErrIndex Integer32, ospfIntfErrAuthFailure Counter32, ospfIntfErrNetmaskMismatch Counter32, ospfIntfErrHelloMismatch Counter32, ospfIntfErrDeadMismatch Counter32, ospfIntfErrOptionsMismatch Counter32, ospfIntfErrUnknownNbr Counter32 } ospfIntfErrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Intf for which these statistics apply." ::= { ospfIntfErrorStatsEntry 1 } ospfIntfErrAuthFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong password in this area." ::= { ospfIntfErrorStatsEntry 2 } ospfIntfErrNetmaskMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong netmask in this area." ::= { ospfIntfErrorStatsEntry 3 } ospfIntfErrHelloMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different hello interval in this area." ::= { ospfIntfErrorStatsEntry 4 } ospfIntfErrDeadMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different dead interval in this area." ::= { ospfIntfErrorStatsEntry 5 } ospfIntfErrOptionsMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different options in this area." ::= { ospfIntfErrorStatsEntry 6 } ospfIntfErrUnknownNbr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received from an unknown neighbor in this area." ::= { ospfIntfErrorStatsEntry 7 } -- Ospf General Statistics contains the cumulative stats for all -- areas / interfaces ospfCumRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all OSPF packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 1 } ospfCumTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all OSPF packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 2 } ospfCumRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Hello packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 3 } ospfCumTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Hello packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 4 } ospfCumRxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Database Description packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 5 } ospfCumTxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Database Description packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 6 } ospfCumRxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Request packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 7 } ospfCumTxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 8 } ospfCumRxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 9 } ospfCumTxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 10 } ospfCumRxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Update packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 11 } ospfCumTxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 12 } ospfCumNbrhello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 1 } ospfCumNbrStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 2 } ospfCumNbrAdjointOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 3 } ospfCumNbrNegotiationDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 4 } ospfCumNbrExchangeDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 5 } ospfCumNbrBadRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas." ::= { ospfCumNbrChangeStats 6 } ospfCumNbrBadSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 7 } ospfCumNbrLoadingDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 8 } ospfCumNbrN1way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas." ::= { ospfCumNbrChangeStats 9 } ospfCumNbrRstAd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces." ::= { ospfCumNbrChangeStats 10 } ospfCumNbrDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 11 } ospfCumNbrN2way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas." ::= { ospfCumNbrChangeStats 12 } ospfCumIntfHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Hello packets sent on all interfaces and areas" ::= { ospfCumIntfChangeStats 1 } ospfCumIntfDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of interfaces down in all OSPF areas." ::= { ospfCumIntfChangeStats 2 } ospfCumIntfLoop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces." ::= { ospfCumIntfChangeStats 3 } ospfCumIntfUnloop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of interfaces, connected to the attatched network in all OSPF areas." ::= { ospfCumIntfChangeStats 4 } ospfCumIntfWaitTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces." ::= { ospfCumIntfChangeStats 5 } ospfCumIntfBackup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces." ::= { ospfCumIntfChangeStats 6 } ospfCumIntfNbrChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas." ::= { ospfCumIntfChangeStats 7 } ospfTmrsKckOffHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces." ::= { ospfTimersKickOffStats 1 } ospfTmrsKckOffRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces." ::= { ospfTimersKickOffStats 2 } ospfTmrsKckOffLsaLock OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces." ::= { ospfTimersKickOffStats 3 } ospfTmrsKckOffLsaAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces." ::= { ospfTimersKickOffStats 4 } ospfTmrsKckOffDbage OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Dbage has been fired." ::= { ospfTimersKickOffStats 5 } ospfTmrsKckOffSummary OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Summary timer has been fired." ::= { ospfTimersKickOffStats 6 } ospfTmrsKckOffAseExport OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the ASE Export timer has been fired." ::= { ospfTimersKickOffStats 7 } -- IGMP Snooping statistics igmpSnoopStats OBJECT-TYPE SYNTAX SEQUENCE OF IgmpSnoopStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Error Statistics." ::= { igmpStats 1 } igmpSnoopStatsEntry OBJECT-TYPE SYNTAX IgmpSnoopStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for IGMP Snooping." INDEX { igmpSnoopVlanIndex } ::= { igmpSnoopStats 1 } IgmpSnoopStatsEntry ::= SEQUENCE { igmpSnoopVlanIndex Integer32, rxIgmpValidPkts Counter32, rxIgmpInvalidPkts Counter32, rxIgmpGenQueries Counter32, rxIgmpGrpSpecificQueries Counter32, rxIgmpLeaves Counter32, rxIgmpReports Counter32, txIgmpGrpSpecificQueries Counter32, txIgmpReports Counter32, txIgmpLeaves Counter32, igmpClearVlanStats INTEGER } igmpSnoopVlanIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the VLAN for which these statistics apply." ::= { igmpSnoopStatsEntry 1 } rxIgmpValidPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of valid IGMP packets received on this VLAN." ::= { igmpSnoopStatsEntry 2 } rxIgmpInvalidPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of invalid IGMP packets received on this VLAN." ::= { igmpSnoopStatsEntry 3 } rxIgmpGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP General Query packets received on this VLAN." ::= { igmpSnoopStatsEntry 4 } rxIgmpGrpSpecificQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Group Specific Query packets received on this VLAN." ::= { igmpSnoopStatsEntry 5 } rxIgmpLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Leave packets received on this VLAN." ::= { igmpSnoopStatsEntry 6 } rxIgmpReports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Report packets received on this VLAN." ::= { igmpSnoopStatsEntry 7 } txIgmpGrpSpecificQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Group Specific Query packets transmitted on this VLAN." ::= { igmpSnoopStatsEntry 8 } txIgmpReports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Report packets transmitted on this VLAN." ::= { igmpSnoopStatsEntry 9 } txIgmpLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Leave packets transmitted on this VLAN." ::= { igmpSnoopStatsEntry 10 } igmpClearVlanStats OBJECT-TYPE SYNTAX INTEGER { clear(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(1) results in clearing the statistics for this snooping VLAN." ::= { igmpSnoopStatsEntry 11 } -- Information - Run-time IP Route Table ipRouteInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRouteInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of run-time IP routes." ::= { ipRoutingInfo 1 } ipRouteInfoEntry OBJECT-TYPE SYNTAX IpRouteInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the run-time IP route table" INDEX { ipRouteInfoIndx } ::= { ipRouteInfoTable 1 } IpRouteInfoEntry ::= SEQUENCE { ipRouteInfoIndx Integer32, ipRouteInfoDestIp IpAddress, ipRouteInfoMask IpAddress, ipRouteInfoGateway IpAddress, ipRouteInfoTag INTEGER, ipRouteInfoType INTEGER, ipRouteInfoInterface Integer32, ipRouteInfoMetric Integer32 } ipRouteInfoIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this route table." ::= { ipRouteInfoEntry 1 } ipRouteInfoDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipRouteInfoEntry 2 } ipRouteInfoMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP mask of this route." ::= { ipRouteInfoEntry 3 } ipRouteInfoGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The next-hop router address for this route." ::= { ipRouteInfoEntry 4 } ipRouteInfoTag OBJECT-TYPE SYNTAX INTEGER { fixed(1), static(2), addr(3), rip(4), broadcast(5), martian(6), multicast(7), vip(8), bgp(9), ospf(10), none(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tag-type for this route." ::= { ipRouteInfoEntry 5 } ipRouteInfoType OBJECT-TYPE SYNTAX INTEGER { indirect(1), direct(2), local(3), broadcast(4), martian(5), multicast(6), other(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the route." ::= { ipRouteInfoEntry 6 } ipRouteInfoInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the destination address is applicable." ::= { ipRouteInfoEntry 7 } ipRouteInfoMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric of this route." ::= { ipRouteInfoEntry 8 } routeTableClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the route table." ::= { ipRoutingInfo 2 } -- Run Time ARP Table arpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AgArpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ARP entries." ::= { arpInfo 1 } arpInfoEntry OBJECT-TYPE SYNTAX AgArpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ARP table" INDEX { arpInfoDestIp } ::= { arpInfoTable 1 } AgArpInfoEntry ::= SEQUENCE { arpInfoDestIp IpAddress, arpInfoMacAddr PhysAddress, arpInfoVLAN Integer32, arpInfoSrcPort Integer32, arpInfoRefPorts Integer32, arpInfoFlag INTEGER } arpInfoDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of the ARP entry." ::= { arpInfoEntry 1 } arpInfoMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for the ARP entry." ::= { arpInfoEntry 2 } arpInfoVLAN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN identifier for the ARP entry." ::= { arpInfoEntry 3 } arpInfoSrcPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number on which this entry's equivalence is effective." ::= { arpInfoEntry 4 } arpInfoRefPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rference ports associated with this ARP entry." ::= { arpInfoEntry 5 } arpInfoFlag OBJECT-TYPE SYNTAX INTEGER { clear(1), unresolved(2), permanent(3), indirect(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The flag associated with this ARP entry." ::= { arpInfoEntry 6 } arpCacheClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the ARP cache." ::= { arpInfo 2 } -- igmp snooping info table igmpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IGMP group membership information." ::= { igmpInfo 1 } igmpInfoEntry OBJECT-TYPE SYNTAX IgmpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IGMP group member ." INDEX { igmpInfoIndex } ::= { igmpInfoTable 1 } IgmpInfoEntry ::= SEQUENCE { igmpInfoIndex Integer32, igmpInfoGroupId IpAddress, igmpInfoVlanId Integer32, igmpInfoVersion INTEGER, igmpInfoPortNum Integer32, igmpInfoExpires DisplayString } igmpInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The igmp group number for which the IGMP info table is related." ::= { igmpInfoEntry 1} igmpInfoGroupId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the IGMP group." ::= { igmpInfoEntry 2} igmpInfoVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID for this IGMP group." ::= { igmpInfoEntry 3} igmpInfoVersion OBJECT-TYPE SYNTAX INTEGER { v3(1), v2(2), v1(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Version of IGMP host." ::= { igmpInfoEntry 5} igmpInfoPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Version of IGMP host." ::= { igmpInfoEntry 6 } igmpInfoExpires OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The expiration time for this host." ::= { igmpInfoEntry 7 } igmpMrtrInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpMrtrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IGMP mrouters." ::= { igmpInfo 2 } igmpMrtrInfoEntry OBJECT-TYPE SYNTAX IgmpMrtrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IGMP mrouter." INDEX { igmpMrtrInfoIndex } ::= { igmpMrtrInfoTable 1 } IgmpMrtrInfoEntry ::= SEQUENCE { igmpMrtrInfoIndex Integer32, igmpMrtrInfoVlanId Integer32, igmpMrtrInfoPortId Integer32, igmpMrtrInfoVersion Integer32, igmpMrtrInfoExpires DisplayString, igmpMrtrInfoMrt Integer32 } igmpMrtrInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mrouter number for which the IGMP mrouter info table is related." ::= { igmpMrtrInfoEntry 1} igmpMrtrInfoVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID on which this IGMP mrouter is attached." ::= { igmpMrtrInfoEntry 2} igmpMrtrInfoPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port on which this IGMP mrouter is attached." ::= { igmpMrtrInfoEntry 3} igmpMrtrInfoVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version of this IGMP mrouter." ::= { igmpMrtrInfoEntry 4} igmpMrtrInfoExpires OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The expiration time for this mrouter." ::= { igmpMrtrInfoEntry 5 } igmpMrtrInfoMrt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Maximum Query Response time of this IGMP mrouter." ::= { igmpMrtrInfoEntry 6 } -- RIP Information rip2GeneralInfo OBJECT IDENTIFIER ::= { rip2Info 1 } ripInfoState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP global state." ::= { rip2GeneralInfo 1 } ripInfoUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Update Period in seconds." ::= { rip2GeneralInfo 2 } rip2InfoIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RipInfoIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information table of RIP." ::= { rip2Info 2 } ripInfoIntfEntry OBJECT-TYPE SYNTAX RipInfoIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about RIP on IP interface." INDEX { ripInfoIntfIndex } ::= { rip2InfoIntfTable 1 } RipInfoIntfEntry ::= SEQUENCE { ripInfoIntfIndex Integer32, ripInfoIntfVersion INTEGER, ripInfoIntfAddress IpAddress, ripInfoIntfState INTEGER, ripInfoIntfListen INTEGER, ripInfoIntfTrigUpdate INTEGER, ripInfoIntfMcastUpdate INTEGER, ripInfoIntfPoisonReverse INTEGER, ripInfoIntfSupply INTEGER, ripInfoIntfMetric INTEGER, ripInfoIntfAuth INTEGER, ripInfoIntfKey DisplayString, ripInfoIntfDefault INTEGER } ripInfoIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the RIP information is related." ::= { ripInfoIntfEntry 1 } ripInfoIntfVersion OBJECT-TYPE SYNTAX INTEGER { ripVersion1(1), ripVersion2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP version." ::= { ripInfoIntfEntry 2 } ripInfoIntfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface address." ::= { ripInfoIntfEntry 3 } ripInfoIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of RIP protocol." ::= { ripInfoIntfEntry 4 } ripInfoIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of listening to route updates." ::= { ripInfoIntfEntry 5 } ripInfoIntfTrigUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of triggered updates." ::= { ripInfoIntfEntry 6 } ripInfoIntfMcastUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of multicast updates." ::= { ripInfoIntfEntry 7 } ripInfoIntfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of RIP poison reverse." ::= { ripInfoIntfEntry 8 } ripInfoIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of supplying route updates." ::= { ripInfoIntfEntry 9 } ripInfoIntfMetric OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP route metric for this interface." ::= { ripInfoIntfEntry 10 } ripInfoIntfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), password(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Authentication used on this interface." ::= { ripInfoIntfEntry 11 } ripInfoIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP update authentication password." ::= { ripInfoIntfEntry 12 } ripInfoIntfDefault OBJECT-TYPE SYNTAX INTEGER { both(1), listen(2), supply(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies what RIP does with default routes." ::= { ripInfoIntfEntry 13 } -- IP Interface Information ipInfoRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Router ID information." ::= { ipInfo 1 } ipIntfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP interface information." ::= { ipInfo 2 } intfInfoEntry OBJECT-TYPE SYNTAX IntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in IP interface information table." INDEX { intfInfoIndex } ::= { ipIntfInfoTable 1 } IntfInfoEntry ::= SEQUENCE { intfInfoIndex Integer32, intfInfoAddr DisplayString, intfInfoNetMask DisplayString, intfInfoBcastAddr DisplayString, intfInfoVlan Integer32, intfInfoStatus INTEGER } intfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the information is related." ::= { intfInfoEntry 1 } intfInfoAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface." ::= { intfInfoEntry 2 } intfInfoNetMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the interface." ::= { intfInfoEntry 3 } intfInfoBcastAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The broadcast address of the interface." ::= { intfInfoEntry 4 } intfInfoVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN number for this interface." ::= { intfInfoEntry 5 } intfInfoStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the interface." ::= { intfInfoEntry 6 } -- IP Gateway Information gatewayInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GatewayInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information for the default gateways." ::= { ipInfo 3 } gatewayInfoEntry OBJECT-TYPE SYNTAX GatewayInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the gateway information table" INDEX { gatewayInfoIndex } ::= { gatewayInfoTable 1 } GatewayInfoEntry ::= SEQUENCE { gatewayInfoIndex Integer32, gatewayInfoAddr IpAddress, gatewayInfoStatus INTEGER } gatewayInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway number for which the information is related." ::= { gatewayInfoEntry 1} gatewayInfoAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the default gateway." ::= { gatewayInfoEntry 2 } gatewayInfoStatus OBJECT-TYPE SYNTAX INTEGER { up(1), failed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the default gateway." ::= { gatewayInfoEntry 4 } ipInfoBootpRelayState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of BOOTP relay." ::= { ipInfo 4 } ipInfoBootpRelayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of BOOTP server." ::= { ipInfo 5 } ipInfoBootpRelayAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of second BOOTP server." ::= { ipInfo 6 } ipInfoFwdState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "IP forwarding global state." ::= { ipInfo 7 } ipInfoFwdDirectedBcast OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of forwarding directed broadcasts." ::= { ipInfo 8 } ipInfoNwfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpInfoNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP network filter information." ::= { ipInfo 9 } ipInfoNwfEntry OBJECT-TYPE SYNTAX IpInfoNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IP network filter information table." INDEX { ipInfoNwfIndex } ::= { ipInfoNwfTable 1 } IpInfoNwfEntry ::= SEQUENCE { ipInfoNwfIndex Integer32, ipInfoNwfAddr IpAddress, ipInfoNwfMask IpAddress, ipInfoNwfState INTEGER } ipInfoNwfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The netowrk filter number for which the NWF is related." ::= { ipInfoNwfEntry 1} ipInfoNwfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the network filter." ::= { ipInfoNwfEntry 2 } ipInfoNwfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the network filter." ::= { ipInfoNwfEntry 3 } ipInfoNwfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the network filter." ::= { ipInfoNwfEntry 4 } -- IP Route Map Information ipInfoRmapTable OBJECT-TYPE SYNTAX SEQUENCE OF IpInfoRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map information." ::= { ipInfo 10 } ipInfoRmapEntry OBJECT-TYPE SYNTAX IpInfoRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipInfoRmapIndex } ::= { ipInfoRmapTable 1 } IpInfoRmapEntry ::= SEQUENCE { ipInfoRmapIndex Integer32, ipInfoRmapLp Unsigned32, ipInfoRmapMetric Unsigned32, ipInfoRmapPrec INTEGER, ipInfoRmapWeight INTEGER, ipInfoRmapState INTEGER, ipInfoRmapAp DisplayString, ipInfoRmapMetricType INTEGER } ipInfoRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipInfoRmapEntry 1} ipInfoRmapLp OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The local-preference of the route map. 4294967295 means none" ::= { ipInfoRmapEntry 2 } ipInfoRmapMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric of the route map. 4294967295 means none" ::= { ipInfoRmapEntry 3 } ipInfoRmapPrec OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The precedence of the route map." ::= { ipInfoRmapEntry 4 } ipInfoRmapWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The weight of the route map. 65535 means none" ::= { ipInfoRmapEntry 5 } ipInfoRmapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map." ::= { ipInfoRmapEntry 6 } ipInfoRmapAp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..18)) MAX-ACCESS read-only STATUS current DESCRIPTION "The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]" ::= { ipInfoRmapEntry 7 } ipInfoRmapMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF metric-type of the matched route." ::= { ipInfoRmapEntry 8 } -- IP OSPF Information ipOspfInfo OBJECT IDENTIFIER ::= { ipInfo 11 } ipOspfInfoState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF global state." ::= { ipOspfInfo 1 } ipOspfInfoDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric to be assigned." ::= { ipOspfInfo 2 } ipOspfInfoDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type to be assigned." ::= { ipOspfInfo 3 } ipOspfInfoRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router ID of the switch." ::= { ipOspfInfo 4 } ipOspfInfoLsdbLimit OBJECT-TYPE SYNTAX INTEGER (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "The LSDB limit for external LSA." ::= { ipOspfInfo 5 } -- IP OSPF Area Information ipOspfAreaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpOspfAreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Information." ::= { ipOspfInfo 6 } ipOspfAreaInfoEntry OBJECT-TYPE SYNTAX IpOspfAreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ipOspfAreaInfoIndex, ipOspfAreaInfoId } ::= { ipOspfAreaInfoTable 1 } IpOspfAreaInfoEntry ::= SEQUENCE { ipOspfAreaInfoIndex Integer32, ipOspfAreaInfoId IpAddress, ipOspfAreaInfoSpfInterval INTEGER, ipOspfAreaInfoAuthType INTEGER, ipOspfAreaInfoType INTEGER, ipOspfAreaInfoMetric INTEGER, ipOspfAreaInfoStatus INTEGER } ipOspfAreaInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF area table is related." ::= { ipOspfAreaInfoEntry 1 } ipOspfAreaInfoId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF area." ::= { ipOspfAreaInfoEntry 2 } ipOspfAreaInfoSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The SPF interval for the OSPF area." ::= { ipOspfAreaInfoEntry 3 } ipOspfAreaInfoAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication." ::= { ipOspfAreaInfoEntry 4 } ipOspfAreaInfoType OBJECT-TYPE SYNTAX INTEGER { transit(0), stub(1), nssa(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of Area. transit(0) stub(1) nssa(2)" ::= { ipOspfAreaInfoEntry 5 } ipOspfAreaInfoMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Metric (1-65535)" ::= { ipOspfAreaInfoEntry 6 } ipOspfAreaInfoStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status disabled(0) enabled(1)" ::= { ipOspfAreaInfoEntry 7 } -- IP OSPF Range Information ipOspfRangeInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpOspfRangeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF summary range information." ::= { ipOspfInfo 7 } ipOspfRangeInfoEntry OBJECT-TYPE SYNTAX IpOspfRangeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF summary range." INDEX { ipOspfRangeInfoIndex } ::= { ipOspfRangeInfoTable 1 } IpOspfRangeInfoEntry ::= SEQUENCE { ipOspfRangeInfoIndex Integer32, ipOspfRangeInfoAddr IpAddress, ipOspfRangeInfoMask IpAddress, ipOspfRangeInfoAreaIndex Integer32, ipOspfRangeInfoHideState INTEGER, ipOspfRangeInfoState INTEGER } ipOspfRangeInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPF summary range table is related." ::= { ipOspfRangeInfoEntry 1} ipOspfRangeInfoAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the range." ::= { ipOspfRangeInfoEntry 2 } ipOspfRangeInfoMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of the range." ::= { ipOspfRangeInfoEntry 3 } ipOspfRangeInfoAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ipOspfRangeInfoEntry 4 } ipOspfRangeInfoHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the hide range." ::= { ipOspfRangeInfoEntry 5 } ipOspfRangeInfoState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the range." ::= { ipOspfRangeInfoEntry 6 } -- IP OSPF Interface Information ipOspfIntfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpOspfIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Information." ::= { ipOspfInfo 8 } ipOspfIntfInfoEntry OBJECT-TYPE SYNTAX IpOspfIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF Interface." INDEX { ipOspfIntfInfoIndex } ::= { ipOspfIntfInfoTable 1 } IpOspfIntfInfoEntry ::= SEQUENCE { ipOspfIntfInfoIndex Integer32, ipOspfIntfInfoId IpAddress, ipOspfIntfInfoArea INTEGER, ipOspfIntfInfoMdkey INTEGER, ipOspfIntfInfoCost INTEGER, ipOspfIntfInfoPrio INTEGER, ipOspfIntfInfoHello INTEGER, ipOspfIntfInfoDead INTEGER, ipOspfIntfInfoTrans INTEGER, ipOspfIntfInfoRetra INTEGER, ipOspfIntfInfoAuthKey DisplayString, ipOspfIntfInfoStatus INTEGER } ipOspfIntfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which the OSPF Interface table is related." ::= { ipOspfIntfInfoEntry 1} ipOspfIntfInfoId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF interface." ::= { ipOspfIntfInfoEntry 2 } ipOspfIntfInfoArea OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the area that the interface belongs" ::= { ipOspfIntfInfoEntry 3 } ipOspfIntfInfoMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key for the OSPF interface 0 (none) no MD5 authentication." ::= { ipOspfIntfInfoEntry 4 } ipOspfIntfInfoCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface cost" ::= { ipOspfIntfInfoEntry 5 } ipOspfIntfInfoPrio OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface router priority" ::= { ipOspfIntfInfoEntry 6 } ipOspfIntfInfoHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval" ::= { ipOspfIntfInfoEntry 7 } ipOspfIntfInfoDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval" ::= { ipOspfIntfInfoEntry 8 } ipOspfIntfInfoTrans OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay" ::= { ipOspfIntfInfoEntry 9 } ipOspfIntfInfoRetra OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval" ::= { ipOspfIntfInfoEntry 10 } ipOspfIntfInfoAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Key" ::= { ipOspfIntfInfoEntry 11 } ipOspfIntfInfoStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the interface disabled(0), enabled(1)" ::= { ipOspfIntfInfoEntry 12 } -- IP OSPF Virtual Link Information ipOspfVirtIntfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpOspfVirtIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Virtual Interface Information." ::= { ipOspfInfo 9 } ipOspfVirtIntfInfoEntry OBJECT-TYPE SYNTAX IpOspfVirtIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF virtual Interface." INDEX { ipOspfVirtIntfInfoIndex } ::= { ipOspfVirtIntfInfoTable 1 } IpOspfVirtIntfInfoEntry ::= SEQUENCE { ipOspfVirtIntfInfoIndex Integer32, ipOspfVirtIntfInfoAreaId INTEGER, ipOspfVirtIntfInfoNbr IpAddress, ipOspfVirtIntfInfoMdkey INTEGER, ipOspfVirtIntfInfoHello INTEGER, ipOspfVirtIntfInfoDead INTEGER, ipOspfVirtIntfInfoTrans INTEGER, ipOspfVirtIntfInfoRetra INTEGER, ipOspfVirtIntfInfoAuthKey DisplayString, ipOspfVirtIntfInfoStatus INTEGER } ipOspfVirtIntfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related." ::= { ipOspfVirtIntfInfoEntry 1} ipOspfVirtIntfInfoAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF area to which this virtual interface belongs." ::= { ipOspfVirtIntfInfoEntry 2 } ipOspfVirtIntfInfoNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF neighbor for this virtual interface." ::= { ipOspfVirtIntfInfoEntry 3 } ipOspfVirtIntfInfoMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication." ::= { ipOspfVirtIntfInfoEntry 4 } ipOspfVirtIntfInfoHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval" ::= { ipOspfVirtIntfInfoEntry 5 } ipOspfVirtIntfInfoDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval" ::= { ipOspfVirtIntfInfoEntry 6 } ipOspfVirtIntfInfoTrans OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay" ::= { ipOspfVirtIntfInfoEntry 7 } ipOspfVirtIntfInfoRetra OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval" ::= { ipOspfVirtIntfInfoEntry 8 } ipOspfVirtIntfInfoAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Key" ::= { ipOspfVirtIntfInfoEntry 9 } ipOspfVirtIntfInfoStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status disabled(0), enabled(1)" ::= { ipOspfVirtIntfInfoEntry 10 } --IP OSPF Host Information ipOspfHostInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpOspfHostInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Host Information." ::= { ipOspfInfo 10 } ipOspfHostInfoEntry OBJECT-TYPE SYNTAX IpOspfHostInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF host." INDEX { ipOspfHostInfoIndex, ipOspfHostInfoIpAddr } ::= { ipOspfHostInfoTable 1 } IpOspfHostInfoEntry ::= SEQUENCE { ipOspfHostInfoIndex Integer32, ipOspfHostInfoIpAddr IpAddress, ipOspfHostInfoAreaIndex Integer32, ipOspfHostInfoCost Integer32, ipOspfHostInfoState INTEGER } ipOspfHostInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF host number for which the OSPF host table is related." ::= { ipOspfHostInfoEntry 1} ipOspfHostInfoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF host." ::= { ipOspfHostInfoEntry 2 } ipOspfHostInfoAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ipOspfHostInfoEntry 3 } ipOspfHostInfoCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of the corresponding host." ::= { ipOspfHostInfoEntry 4 } ipOspfHostInfoState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable an OSPF Host" ::= { ipOspfHostInfoEntry 5 } ipOspfRedistributeInfo OBJECT IDENTIFIER ::= { ipOspfInfo 11 } ipOspfRedistributeStaticInfo OBJECT IDENTIFIER ::= { ipOspfRedistributeInfo 1 } ipOspfRedistributeStaticInfoMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ipOspfRedistributeStaticInfo 1 } ipOspfRedistributeStaticInfoMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ipOspfRedistributeStaticInfo 2 } ipOspfRedistributeStaticInfoOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ipOspfRedistributeStaticInfo 3 } ipOspfRedistributeFixedInfo OBJECT IDENTIFIER ::= { ipOspfRedistributeInfo 2 } ipOspfRedistributeFixedInfoMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ipOspfRedistributeFixedInfo 1 } ipOspfRedistributeFixedInfoMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ipOspfRedistributeFixedInfo 2 } ipOspfRedistributeFixedInfoOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ipOspfRedistributeFixedInfo 3 } ipOspfRedistributeRipInfo OBJECT IDENTIFIER ::= { ipOspfRedistributeInfo 3 } ipOspfRedistributeRipInfoMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ipOspfRedistributeRipInfo 1 } ipOspfRedistributeRipInfoMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ipOspfRedistributeRipInfo 2 } ipOspfRedistributeRipInfoOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ipOspfRedistributeRipInfo 3 } ipOspfMd5keyInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpOspfMd5keyInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF MD5 keys Information." ::= { ipOspfInfo 12 } ipOspfMd5keyInfoEntry OBJECT-TYPE SYNTAX IpOspfMd5keyInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF MD keys table." INDEX { ipOspfMd5keyInfoIndex } ::= { ipOspfMd5keyInfoTable 1 } IpOspfMd5keyInfoEntry ::= SEQUENCE { ipOspfMd5keyInfoIndex Integer32, ipOspfMd5keyInfoKey DisplayString } ipOspfMd5keyInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF MD5 Key number for which the OSPF MdKey table is related." ::= { ipOspfMd5keyInfoEntry 1} ipOspfMd5keyInfoKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string representing the MD5 Key." ::= { ipOspfMd5keyInfoEntry 2 } -- VRRP Information vrrpInfoVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpInfoVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router run-time information." ::= { vrrpInfo 1 } vrrpInfoVirtRtrTableEntry OBJECT-TYPE SYNTAX VrrpInfoVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The run-time information about a VRRP virtual router." INDEX { vrrpInfoVirtRtrIndex } ::= { vrrpInfoVirtRtrTable 1 } VrrpInfoVirtRtrTableEntry ::= SEQUENCE { vrrpInfoVirtRtrIndex Integer32, vrrpInfoVirtRtrConfig INTEGER, vrrpInfoVirtRtrID INTEGER, vrrpInfoVirtRtrAddr IpAddress, vrrpInfoVirtRtrIfIndex Integer32, vrrpInfoVirtRtrOwnership INTEGER, vrrpInfoVirtRtrPriority INTEGER, vrrpInfoVirtRtrState INTEGER, vrrpInfoVirtRtrServer INTEGER, vrrpInfoVirtRtrProxy INTEGER } vrrpInfoVirtRtrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router index." ::= { vrrpInfoVirtRtrTableEntry 1 } vrrpInfoVirtRtrConfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the VRRP virtual router." ::= { vrrpInfoVirtRtrTableEntry 2 } vrrpInfoVirtRtrID OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpInfoVirtRtrTableEntry 3 } vrrpInfoVirtRtrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router IP address." ::= { vrrpInfoVirtRtrTableEntry 4 } vrrpInfoVirtRtrIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpInfoVirtRtrTableEntry 5 } vrrpInfoVirtRtrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpInfoVirtRtrTableEntry 6 } vrrpInfoVirtRtrState OBJECT-TYPE SYNTAX INTEGER { init(1), master(2), backup(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router state." ::= { vrrpInfoVirtRtrTableEntry 7 } vrrpInfoVirtRtrOwnership OBJECT-TYPE SYNTAX INTEGER { owner(1), renter(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router ownership status." ::= { vrrpInfoVirtRtrTableEntry 8 } vrrpInfoVirtRtrServer OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP server state identifies virtual routers that support Layer 4 services." ::= { vrrpInfoVirtRtrTableEntry 9 } vrrpInfoVirtRtrProxy OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP proxy state identifies virtual proxy routers." ::= { vrrpInfoVirtRtrTableEntry 10 } -- Ospf Information ospfGeneralInfo OBJECT IDENTIFIER ::= { ospfInfo 1 } ospfVersion OBJECT-TYPE SYNTAX INTEGER { ospfVersion1(1), ospfVersion2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF version." ::= { ospfGeneralInfo 1 } ospfRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router ID of the switch." ::= { ospfGeneralInfo 2 } ospfStartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time when ospf has been started." ::= { ospfGeneralInfo 3 } ospfProcessUptime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time since ospf has been started." ::= { ospfGeneralInfo 4 } ospfLsTypesSupported OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State Types that are supported." ::= { ospfGeneralInfo 5 } ospfAreaBorderRouter OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Area Border Router Role." ::= { ospfGeneralInfo 6 } ospfAreaBoundaryRouter OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Area Boundary Router Role." ::= { ospfGeneralInfo 7 } ospfExternalLsa OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external LSAs." ::= { ospfGeneralInfo 8 } ospfIntfCountForRouter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of interfaces for this router." ::= { ospfGeneralInfo 9 } ospfVlinkCountForRouter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of virtual links for this router." ::= { ospfGeneralInfo 10 } ospfNewLsaReceived OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of new LSAs reveived." ::= { ospfGeneralInfo 11 } ospfTotalLsaOriginated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSAs originated." ::= { ospfGeneralInfo 12 } ospfTotalNumberOfLsdbEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries in the Link State Database." ::= { ospfGeneralInfo 13 } ospfTotalNeighbours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF neighbours." ::= { ospfGeneralInfo 14 } ospfNbrInInitState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbours in the initial state of exchange." ::= { ospfGeneralInfo 15 } ospfNbrInExchState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbours in the exchange state." ::= { ospfGeneralInfo 16 } ospfNbrInFullState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbours in the Full state of exchange." ::= { ospfGeneralInfo 17 } ospfTotalAreas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of areas." ::= { ospfGeneralInfo 18 } ospfTotalTransitAreas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of Transit areas." ::= { ospfGeneralInfo 19 } ospfTotalNssaAreas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of NSSA areas." ::= { ospfGeneralInfo 20 } ospfAreaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area information." ::= { ospfInfo 2 } ospfAreaInfoEntry OBJECT-TYPE SYNTAX OspfAreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfAreaInfoIndex } ::= { ospfAreaInfoTable 1 } OspfAreaInfoEntry ::= SEQUENCE { ospfAreaInfoIndex Integer32, ospfAreaInfoId IpAddress, ospfAreaInfoStatus INTEGER, ospfTotalNumberOfInterfaces Integer32, ospfNumberOfInterfacesUp Integer32, ospfAreaInfoAuthType INTEGER, ospfAreaInfoSPF Integer32, ospfNumberOfLsdbEntries Integer32, ospfAreaInfoAreaBorderRouter Integer32, ospfAreaInfoASBoundaryRouter Integer32, ospfAreaInfoTotalNeighbours Integer32 } ospfAreaInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF info table is related." ::= { ospfAreaInfoEntry 1 } ospfAreaInfoId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the OSPF area." ::= { ospfAreaInfoEntry 2 } ospfAreaInfoStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Area Status: disabled(0), enabled(1)." ::= { ospfAreaInfoEntry 3 } ospfTotalNumberOfInterfaces OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces for this OSPF area." ::= { ospfAreaInfoEntry 4 } ospfNumberOfInterfacesUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of interfaces UP in area." ::= { ospfAreaInfoEntry 5 } ospfAreaInfoAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication." ::= { ospfAreaInfoEntry 6 } ospfAreaInfoSPF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times SPF ran." ::= { ospfAreaInfoEntry 7 } ospfNumberOfLsdbEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Link State Database entries for this OSPF area." ::= { ospfAreaInfoEntry 8 } ospfAreaInfoAreaBorderRouter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Area Border Router count." ::= { ospfAreaInfoEntry 9 } ospfAreaInfoASBoundaryRouter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Boundary Router count." ::= { ospfAreaInfoEntry 10 } ospfAreaInfoTotalNeighbours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF neighbors." ::= { ospfAreaInfoEntry 11 } ospfIntfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface information." ::= { ospfInfo 3 } ospfIntfInfoEntry OBJECT-TYPE SYNTAX OspfIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF interface." INDEX { ospfIfInfoIndex } ::= { ospfIntfInfoTable 1 } OspfIntfInfoEntry ::= SEQUENCE { ospfIfInfoIndex Integer32, ospfIfInfoIpAddress IpAddress, ospfIfInfoArea INTEGER, ospfIfInfoAdminStatus INTEGER, ospfIfInfoRouterID IpAddress, ospfIfInfoState INTEGER, ospfIfInfoPriority INTEGER, ospfIfInfoDesignatedRouterID IpAddress, ospfIfInfoDesignatedRouterIpAddress IpAddress, ospfIfInfoBackupDesignatedRouterID IpAddress, ospfIfInfoBackupDesignatedRouterIpAddress IpAddress, ospfIfInfoHello INTEGER, ospfIfInfoDead INTEGER, ospfIfInfoWait Integer32, ospfIfInfoRetransmit INTEGER, ospfIfInfoTransitDelay INTEGER, ospfIfInfoTotalNeighbours Integer32, ospfIfInfoEvents Integer32, ospfIfInfoAuthType INTEGER } ospfIfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF interface number for which the OSPF info table is related." ::= { ospfIntfInfoEntry 1 } ospfIfInfoIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the OSPF interface." ::= { ospfIntfInfoEntry 2 } ospfIfInfoArea OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the area that the interface belongs." ::= { ospfIntfInfoEntry 3 } ospfIfInfoAdminStatus OBJECT-TYPE SYNTAX INTEGER { down(0), up(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Admin Status of the interface: down(0), up(1)." ::= { ospfIntfInfoEntry 4 } ospfIfInfoRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router ID of the switch." ::= { ospfIntfInfoEntry 5 } ospfIfInfoState OBJECT-TYPE SYNTAX INTEGER { down(0), loopback(1), waiting(2), ptop(3), dr(4), backupdr(5), drother(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6)." ::= { ospfIntfInfoEntry 6 } ospfIfInfoPriority OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface router priority" ::= { ospfIntfInfoEntry 7 } ospfIfInfoDesignatedRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Designated Router ID for this OSPF interface." ::= { ospfIntfInfoEntry 8 } ospfIfInfoDesignatedRouterIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Designated Router IP Address for this OSPF interface." ::= { ospfIntfInfoEntry 9 } ospfIfInfoBackupDesignatedRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Backup Designated Router ID for this OSPF interface." ::= { ospfIntfInfoEntry 10 } ospfIfInfoBackupDesignatedRouterIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Backup Designated Router Ip Address for this OSPF interface." ::= { ospfIntfInfoEntry 11 } ospfIfInfoHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The hello timer for this OSPF interface." ::= { ospfIntfInfoEntry 12 } ospfIfInfoDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The dead timer for this OSPF interface." ::= { ospfIntfInfoEntry 13 } ospfIfInfoWait OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Wait interval for this OSPF interface." ::= { ospfIntfInfoEntry 14 } ospfIfInfoRetransmit OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "The retransmit interval for this OSPF interface." ::= { ospfIntfInfoEntry 15 } ospfIfInfoTransitDelay OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "The transit delay for this OSPF interface." ::= { ospfIntfInfoEntry 16 } ospfIfInfoTotalNeighbours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours for this OSPF interface." ::= { ospfIntfInfoEntry 17 } ospfIfInfoEvents OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of events for this OSPF interface." ::= { ospfIntfInfoEntry 18 } ospfIfInfoAuthType OBJECT-TYPE SYNTAX INTEGER { none(0), password(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used: none(1) - no authentication, password(2) - use password" ::= { ospfIntfInfoEntry 19 } -- OSPF Interface/Nbr Info Table ospfIfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Neighbor information." ::= { ospfInfo 5 } ospfIfNbrEntry OBJECT-TYPE SYNTAX OspfIfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF interface, neighbor pair." INDEX { ospfIfNbrIntfIndex, ospfIfNbrIpAddr } ::= { ospfIfNbrTable 1 } OspfIfNbrEntry ::= SEQUENCE { ospfIfNbrIntfIndex Integer32, ospfIfNbrIpAddr IpAddress, ospfIfNbrPriority Integer32, ospfIfNbrState INTEGER, ospfIfNbrDesignatedRtr IpAddress, ospfIfNbrBackupDesignatedRtr IpAddress, ospfIfNbrIpAddress IpAddress } ospfIfNbrIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which this Interface/Nbr table is related." ::= { ospfIfNbrEntry 1} ospfIfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Neighbor ID ." ::= { ospfIfNbrEntry 2 } ospfIfNbrPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the OSPF neighbor." ::= { ospfIfNbrEntry 3 } ospfIfNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoway(4), exStart(5), exchange(6), loading(7), full(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the OSPF neighbor." ::= { ospfIfNbrEntry 4 } ospfIfNbrDesignatedRtr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the Designated Router for this OSPF Neighbor." ::= { ospfIfNbrEntry 5 } ospfIfNbrBackupDesignatedRtr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the backup designated Router for this OSPF Neighbor." ::= { ospfIfNbrEntry 6 } ospfIfNbrIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF Neighbor." ::= { ospfIfNbrEntry 7 } vrrpOperVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpOperVirtRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of virtual routers." ::= { vrrpOper 1 } vrrpOperVirtRtrEntry OBJECT-TYPE SYNTAX VrrpOperVirtRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the vrrpOperVirtRtrTable " INDEX { vrrpOperVirtRtrIndex } ::= { vrrpOperVirtRtrTable 1 } VrrpOperVirtRtrEntry ::= SEQUENCE { vrrpOperVirtRtrIndex Integer32, vrrpOperVirtRtrBackup INTEGER } vrrpOperVirtRtrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index for the VRRP virtual router." ::= { vrrpOperVirtRtrEntry 1 } vrrpOperVirtRtrBackup OBJECT-TYPE SYNTAX INTEGER { ok(1), backup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read." ::= { vrrpOperVirtRtrEntry 2 } vrrpOperVirtRtrGroupBackup OBJECT-TYPE SYNTAX INTEGER { ok(1), backup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read." ::= { vrrpOper 2 } -- ---------------------------------------------------------------------------- -- } INSERT: bt2Network -- ---------------------------------------------------------------------------- END