-- ***************************************************************** -- CISCO-POWER-ETHERNET-CAPABILITY.my: -- Cisco POWER-ETHERNET-MIB AGENT-CAPABILITIES -- -- June 2004, Seth Wang -- -- Copyright (c) 2004, 2006-2007, 2009 by Cisco Systems Inc. -- All rights reserved. -- **************************************************************** CISCO-POWER-ETHERNET-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF TruthValue FROM SNMPv2-TC ciscoAgentCapability FROM CISCO-SMI; ciscoPowerEthernetCapability MODULE-IDENTITY LAST-UPDATED "200902140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-lan-switch-snmp@cisco.com" DESCRIPTION "The capabilities description of POWER-ETHERNET-MIB." REVISION "200902140000Z" DESCRIPTION "Added capability statement cPowerEthernetCapV12RO252SGPCat4K." REVISION "200707090000Z" DESCRIPTION "Added capability statement cPowerEthernetCapV12RO233SXHPCat6K." REVISION "200702080000Z" DESCRIPTION "Added a new AGENT-CAPABILITIES cPowerEthernetCapC3kV122SR035 for c3550" REVISION "200605310000Z" DESCRIPTION "Added the VARIATION for pethPsePortPowerPriority in cPowerEthernetCapCatOSV08R0401." REVISION "200406280000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoAgentCapability 412 } cPowerEthernetCapCatOSV08R0401 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco CatOS 8.4(1)." STATUS current DESCRIPTION "POWER-ETHERNET-MIB capabilities." SUPPORTS POWER-ETHERNET-MIB INCLUDES { pethPsePortGroup, pethPsePortNotificationGroup, pethNotificationControlGroup, pethMainPseGroup, pethMainPowerNotificationGroup } VARIATION pethPsePortPowerPairsControlAbility SYNTAX TruthValue DESCRIPTION "Only a limited set of enumerated values is supported." VARIATION pethPsePortPowerPairs SYNTAX INTEGER { signal(1) } DESCRIPTION "Only a limited set of enumerated values is supported." VARIATION pethPsePortType ACCESS read-only DESCRIPTION "Unable to set this in CatOS." VARIATION pethPsePortPowerPriority ACCESS read-only DESCRIPTION "Unable to set this in CatOS." ::= { ciscoPowerEthernetCapability 1 } cPowerEthernetCapC3kV122SR035 AGENT-CAPABILITIES PRODUCT-RELEASE "CISCO IOS 12.2S(0.35) for cat3k" STATUS current DESCRIPTION "POWER-ETHERNET-MIB Capabilities" SUPPORTS POWER-ETHERNET-MIB INCLUDES { pethPsePortGroup, pethMainPseGroup, pethNotificationControlGroup, pethPsePortNotificationGroup, pethMainPowerNotificationGroup } VARIATION pethPsePortPowerPairs ACCESS read-only DESCRIPTION "Read-only access is supported." VARIATION pethPsePortPowerPriority SYNTAX INTEGER { high(2), low(3) } DESCRIPTION "Value Critical(1) is not supported on c3750/c3560/c3550 and Value High(2) is not supported on c3550" VARIATION pethPsePortMPSAbsentCounter DESCRIPTION "Returns zero always." VARIATION pethPsePortOverLoadCounter DESCRIPTION "Returns zero always." VARIATION pethPsePortType ACCESS read-only DESCRIPTION "Read-only access is supported." VARIATION pethMainPseOperStatus SYNTAX INTEGER { on(1), off(2) } DESCRIPTION "The value Faulty(3) is not supported on c3750/c3560/c3550." VARIATION pethMainPseConsumptionPower DESCRIPTION "This gives total allocated power instead of total actual consumed power for c3750/c3560/c3550." ::= { ciscoPowerEthernetCapability 2 } cPowerEthernetCapV12RO233SXHPCat6K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(33)SXH on Catalyst 6000/6500 series devices." STATUS current DESCRIPTION "POWER-ETHERNET-MIB capabilities." SUPPORTS POWER-ETHERNET-MIB INCLUDES { pethPsePortGroup, pethPsePortNotificationGroup, pethNotificationControlGroup, pethMainPseGroup } VARIATION pethPsePortPowerPairsControlAbility SYNTAX TruthValue { false(2) } DESCRIPTION "Only a limited set of enumerated values is supported." VARIATION pethPsePortPowerPairs SYNTAX INTEGER { signal(1) } DESCRIPTION "Only a limited set of enumerated values is supported." VARIATION pethPsePortType ACCESS read-only DESCRIPTION "Unable to set this." VARIATION pethPsePortPowerPriority ACCESS read-only DESCRIPTION "Unable to set this." VARIATION pethMainPseUsageThreshold DESCRIPTION "Not supported." ::= { ciscoPowerEthernetCapability 3 } cPowerEthernetCapV12RO252SGPCat4K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(52)SG on CAT4K family switches." STATUS current DESCRIPTION "POWER-ETHERNET-MIB capabilities." SUPPORTS POWER-ETHERNET-MIB INCLUDES { pethPsePortGroup, pethPsePortNotificationGroup, pethNotificationControlGroup, pethMainPseGroup } VARIATION pethPsePortPowerPairs ACCESS read-only DESCRIPTION "Unable to set this." VARIATION pethPsePortType ACCESS read-only DESCRIPTION "Unable to set this." VARIATION pethPsePortPowerPriority ACCESS read-only DESCRIPTION "Unable to set this." VARIATION pethMainPseUsageThreshold ACCESS not-implemented DESCRIPTION "Not supported." ::= { ciscoPowerEthernetCapability 4 } END