DOCS-MCAST-AUTH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- RFC 2578 RowStatus FROM SNMPv2-TC -- RFC 2579 OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- RFC 2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB -- RFC 4001 SnmpTagList FROM SNMP-TARGET-MIB -- RFC 3411 docsIf3CmtsCmRegStatusId FROM DOCS-IF3-MIB clabProjDocsis FROM CLAB-DEF-MIB; docsMcastAuthMib MODULE-IDENTITY LAST-UPDATED "200712060000Z" -- December 6, 2007 ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO " Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: mibs@cablelabs.com" DESCRIPTION "This MIB module contains the management objects for the management of the CMTS Multicast Authorization Module. Copyright 1999-2007 Cable Television Laboratories, Inc. All rights reserved." REVISION "200712060000Z" -- December 6, 2007 DESCRIPTION "Revised version includes ECN OSSIv3.0-N-07.0551-4 and published as I05." REVISION "200612071700Z" -- Dec 7, 2006 DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207." ::= { clabProjDocsis 19} -- Textual Conventions -- Object Definitions docsMcastAuthMibObjects OBJECT IDENTIFIER ::= { docsMcastAuthMib 1 } docsMcastAuthCtrl OBJECT IDENTIFIER ::= { docsMcastAuthMibObjects 1 } docsMcastAuthCtrlEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute enables the enforcement of Multicast Autorization feature. When this attribute is set to 'enable' Multicast Authorization is enforced; otherwise clients are permitted to join any IP multicast session. The factory default value of this attribute is 'disable'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, IP Multicast Join Authorization section." DEFVAL { disable } ::= { docsMcastAuthCtrl 1 } docsMcastAuthCtrlDefProfileNameList OBJECT-TYPE SYNTAX SnmpTagList MAX-ACCESS read-write STATUS current DESCRIPTION "When IP Multicast Authorization is enforced, this attribute provides the default set of Multicast Authorization Profiles the CMTS enforces for a CM in the case that this CM didn't signal a set of profiles during the registration process. If the Default Multicast Authorization Group Name is zero length string, the DefAction attribute determines whether a join request is authorized when a CM registers without a Multicast Authorization Profile Set or a list of config File Session Rules. If the CMTS supports more than 1 profile name as a default, the CMTS enforces each of the profiles in order until the maximum number of profiles is reached. This attribute indicates one or more Multicast Authorization Profiles." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, IP Multicast Profile Name Subtype section." DEFVAL { ''H } ::= { docsMcastAuthCtrl 2 } docsMcastAuthCtrlDefAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the default authorization action when no IP Multicast Session Rule is determined to match a client's IP multicast join request." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Session Rules section." DEFVAL { deny } ::= { docsMcastAuthCtrl 3 } docsMcastAuthCtrlDefMaxNumSess OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the default maximum number of multicast sessions that clients reached through a CM are allowed to join. If set to zero, the maximum number of sessions is not limited by the CMTS. A DefMaxNumSess value of 0 indicates that no dynamic joins are permitted." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Maximum Multicast Sessions section." DEFVAL { 0 } ::= { docsMcastAuthCtrl 4 } docsMcastAuthCmtsCmStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsMcastAuthCmtsCmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object maintains per-CM status of Multicast Authorization policies to be applied to this CM. The CM acquires these policy parameters through the CM registration process, or in the absence of some or all of those parameters, from the Ctrl Object. This object is meaningful when the Control Enable attribute is set to 'enable'. In the process of authorizing a CM client's session request the CMTS must check rules defined in StaticSessRule object and then rules defined in ProfileSessRule object. In the case of multiple multicast session matches, the rule priority attribute defines the final selected session rule. The selection of a session rules when multiple matches have the same priority is vendor specific. The CMTS MAY report in the CmtsCmStatus object CMs that do not signal any IP Multicast Authorization Encodings in the registration process. " ::= { docsMcastAuthMibObjects 2} docsMcastAuthCmtsCmStatusEntry OBJECT-TYPE SYNTAX DocsMcastAuthCmtsCmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsMcastAuthCmtsCmStatus." INDEX { docsIf3CmtsCmRegStatusId } ::= { docsMcastAuthCmtsCmStatusTable 1 } DocsMcastAuthCmtsCmStatusEntry ::= SEQUENCE { docsMcastAuthCmtsCmStatusCfgProfileNameList SnmpTagList, docsMcastAuthCmtsCmStatusCfgListId Unsigned32, docsMcastAuthCmtsCmStatusMaxNumSess Unsigned32, docsMcastAuthCmtsCmStatusCfgParamFlag BITS } docsMcastAuthCmtsCmStatusCfgProfileNameList OBJECT-TYPE SYNTAX SnmpTagList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the set of Profile Names associated with the CM. This attribute indicates the CM signaled 'IP Multicast Authorization Profile Name' encodings during the CM registration process, or in the absence of instances of that config file parameter, the DefProfileNameList attribute from the Ctrl object." ::= { docsMcastAuthCmtsCmStatusEntry 1 } docsMcastAuthCmtsCmStatusCfgListId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the reference to a CMTS created Session Rule List based on the CM signaled 'IP Multicast Authorization Static Session Rule' encodings. The CMTS may reuse this attribute value to reference more than one CM that have signaled the same list of Session Rules to the CMTS. The value zero indicates that the CM did not signal Multicast Session Rules to the CMTS or the CMTS does not support the StaticSessRule, in which case, the CMTS ignores any CM signalled Session Rule endocings during registration." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804,IP Multicast Join Authorization Static Session Rule Subtype section in the Common Radio Frequency Interface Encodings Annex." ::= { docsMcastAuthCmtsCmStatusEntry 2 } docsMcastAuthCmtsCmStatusMaxNumSess OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the CM signaled value in Maximum Multicast Sessions Encoding during the CM registration process. If this value is missing the DefMaxNumSess attribute of the Ctrl object is used to determine the maximum number of multicast sessions this client may forward. The value 0 indicates that no dynamic joins are permitted. The value 65535 (the largest valid value) indicates that the CMTS permits any number of sessions to be joined by clients reached through the CM." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Maximum Multicast Sessions Encoding section in the Common Radio Frequency Interface Encodings Annex." ::= { docsMcastAuthCmtsCmStatusEntry 3 } docsMcastAuthCmtsCmStatusCfgParamFlag OBJECT-TYPE SYNTAX BITS { profile(0), staticMulticast(1), maxNumSessions(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the functions that are activated through the registration process. The bit 'profile' indicates whether the CM signaled 'IP Multicast Authorization Profile Name Subtype' encodings. The bit 'staticMulticast' indicates whether the CM signaled 'IP Multicast Authorization Static Session Rule Subtype' encodings. The bit 'maxNumSess' indicates whether the CM signaled the ' Maximum Multicast Sessions' encoding." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804" ::= { docsMcastAuthCmtsCmStatusEntry 4 } docsMcastAuthProfileSessRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsMcastAuthProfileSessRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines Operator configured profiles to be matched during the authorization process. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the following attributes to be set: PrefixAddrType SrcPrefixAddr SrcPrefixLen GrpPrefixAddr GrpPrefixLen." ::= { docsMcastAuthMibObjects 3} docsMcastAuthProfileSessRuleEntry OBJECT-TYPE SYNTAX DocsMcastAuthProfileSessRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsMcastAuthProfileSessRule. The CMTS persists all instances of the ProfileSessRule object across reinitializations." INDEX { docsMcastAuthProfilesName, docsMcastAuthProfileSessRuleId } ::= { docsMcastAuthProfileSessRuleTable 1 } DocsMcastAuthProfileSessRuleEntry ::= SEQUENCE { docsMcastAuthProfileSessRuleId Unsigned32, docsMcastAuthProfileSessRulePriority Unsigned32, docsMcastAuthProfileSessRulePrefixAddrType InetAddressType, docsMcastAuthProfileSessRuleSrcPrefixAddr InetAddress, docsMcastAuthProfileSessRuleSrcPrefixLen InetAddressPrefixLength, docsMcastAuthProfileSessRuleGrpPrefixAddr InetAddress, docsMcastAuthProfileSessRuleGrpPrefixLen InetAddressPrefixLength, docsMcastAuthProfileSessRuleAction INTEGER, docsMcastAuthProfileSessRuleRowStatus RowStatus } docsMcastAuthProfileSessRuleId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique identifier for each CMTS configured Multicast Authorization Profile Session rule within a Multicast Authorization Profile Name." ::= { docsMcastAuthProfileSessRuleEntry 1 } docsMcastAuthProfileSessRulePriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute configures the rule priority for the static session rule. Permitted values for this attribute range from 0..255. Higher values indicate a higher priority. If more than one session rule matches a joined session, the session rule with the highest rule priority determines the authorization action." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Session Rules section." ::= { docsMcastAuthProfileSessRuleEntry 2 } docsMcastAuthProfileSessRulePrefixAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the address family for the multicast session (S,G) which corresponds to the SrcPrefixAddr and GrpPrefixAddr attributes respectively." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Session Rules section." ::= { docsMcastAuthProfileSessRuleEntry 3 } docsMcastAuthProfileSessRuleSrcPrefixAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies a specific Multicast Source Address defined for this rule. A Source Address that is all zeros is defined as 'all source addresses' (*, G). Source prefix addresses are unicast addresses." REFERENCE "RFC 3569. RFC 3306" ::= { docsMcastAuthProfileSessRuleEntry 4 } docsMcastAuthProfileSessRuleSrcPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the prefix of a range of Source (S) IP multicast group addresses. For Group or ASM based sessions this attribute is set to 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Session Rules section." ::= { docsMcastAuthProfileSessRuleEntry 5 } docsMcastAuthProfileSessRuleGrpPrefixAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the prefix of a range of destination IP multicast group addresses." ::= { docsMcastAuthProfileSessRuleEntry 6 } docsMcastAuthProfileSessRuleGrpPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the prefix of a range of IP multicast group addresses." ::= { docsMcastAuthProfileSessRuleEntry 7 } docsMcastAuthProfileSessRuleAction OBJECT-TYPE SYNTAX INTEGER { accept(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the authorization action for a session join attempt that matches the session rule. The value 'accept' indicates that the rule permits a matching multicast join request is allowed . The value 'deny' indicates that a matching multicast join request is denied." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Session Rules section." DEFVAL { deny } ::= { docsMcastAuthProfileSessRuleEntry 8 } docsMcastAuthProfileSessRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsMcastAuthProfileSessRuleEntry 9 } docsMcastAuthStaticSessRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsMcastAuthStaticSessRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines the Session authorization Rules based on the CM or group of CMs signaled in IP Multicast Join Authorization Static Session Subtype encoding This object reflects the Static Session rules that were included in the CM registration request message." ::= { docsMcastAuthMibObjects 4} docsMcastAuthStaticSessRuleEntry OBJECT-TYPE SYNTAX DocsMcastAuthStaticSessRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsMcastAuthStaticSessRule. The CMTS may persist all instances of the StaticSessRule object across reinitializations." INDEX { docsMcastAuthStaticSessRuleCfgListId, docsMcastAuthStaticSessRuleId } ::= { docsMcastAuthStaticSessRuleTable 1 } DocsMcastAuthStaticSessRuleEntry ::= SEQUENCE { docsMcastAuthStaticSessRuleCfgListId Unsigned32, docsMcastAuthStaticSessRuleId Unsigned32, docsMcastAuthStaticSessRulePriority Unsigned32, docsMcastAuthStaticSessRulePrefixAddrType InetAddressType, docsMcastAuthStaticSessRuleSrcPrefixAddr InetAddress, docsMcastAuthStaticSessRuleSrcPrefixLen InetAddressPrefixLength, docsMcastAuthStaticSessRuleGrpPrefixAddr InetAddress, docsMcastAuthStaticSessRuleGrpPrefixLen InetAddressPrefixLength, docsMcastAuthStaticSessRuleAction INTEGER } docsMcastAuthStaticSessRuleCfgListId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute contains a CMTS-derived value for a set of multicast static session rules associated to one or more CMs." ::= { docsMcastAuthStaticSessRuleEntry 1 } docsMcastAuthStaticSessRuleId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides an identifier for each Multicast Authorization Static Session rule in the IP Multicast Join Authorization Static Session SubType communicated by a CM or group of CMs during registration." ::= { docsMcastAuthStaticSessRuleEntry 2 } docsMcastAuthStaticSessRulePriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the rule priority for the static session rule. Higher values indicate a higher priority. If more than one session rule matches a joined session, the session rule with the highest rule priority determines the authorization action." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, RulePriority section in the Common Radio Frequency Interface Encodings Annex." ::= { docsMcastAuthStaticSessRuleEntry 3 } docsMcastAuthStaticSessRulePrefixAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the address family for the multicast session (S,G) which corresponds to the SrcPrefixAddr and GrpPrefixAddr attributes respectively." ::= { docsMcastAuthStaticSessRuleEntry 4 } docsMcastAuthStaticSessRuleSrcPrefixAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies a specific Multicast Source Address defined for this rule. A Source Address that is all zeros is defined as 'all source addresses (*, G)'. Source Prefix Addresses are unicast host addresses." REFERENCE "RFC 3569. RFC 3306." ::= { docsMcastAuthStaticSessRuleEntry 5 } docsMcastAuthStaticSessRuleSrcPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the prefix of a range of Source (S) IP multicast group addresses. For ASM-based sessions, this attribute is set to 0." ::= { docsMcastAuthStaticSessRuleEntry 6 } docsMcastAuthStaticSessRuleGrpPrefixAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the prefix of a range of destination IP multicast group addresses." ::= { docsMcastAuthStaticSessRuleEntry 7 } docsMcastAuthStaticSessRuleGrpPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the prefix of a range of IP multicast group addresses." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804,Group Prefix Length Subtype section in the Common Radio Frequency Interface Encodings Annex." ::= { docsMcastAuthStaticSessRuleEntry 8 } docsMcastAuthStaticSessRuleAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the authorization action for a session join attempt that matches the session rule. The value 'accept' indicates that the rule permits a matching multicast join request is allowed. The value 'deny' indicates that a matching multicast join request is denied." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Authorization Action section in the Common Radio Frequency Interface Encodings Annex." ::= { docsMcastAuthStaticSessRuleEntry 9 } docsMcastAuthProfilesTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsMcastAuthProfilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the description of the Multicast Authorization profiles for administrative purposes. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the Description attribute to be set." ::= { docsMcastAuthMibObjects 5} docsMcastAuthProfilesEntry OBJECT-TYPE SYNTAX DocsMcastAuthProfilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsMcastAuthProfiles. The CMTS persists all instances of the Profiles object across reinitializations" INDEX { docsMcastAuthProfilesName } ::= { docsMcastAuthProfilesTable 1 } DocsMcastAuthProfilesEntry ::= SEQUENCE { docsMcastAuthProfilesName SnmpAdminString, docsMcastAuthProfilesDescription SnmpAdminString, docsMcastAuthProfilesRowStatus RowStatus } docsMcastAuthProfilesName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute is a unique name or identifier for a Multicast Authorization Profile." ::= { docsMcastAuthProfilesEntry 1 } docsMcastAuthProfilesDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is a human readable description of the Multicast Authorization Profile." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, IP Multicast Profile Name Subtype section." ::= { docsMcastAuthProfilesEntry 2 } docsMcastAuthProfilesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsMcastAuthProfilesEntry 3 } -- Conformance Definitions docsMcastAuthMibConformance OBJECT IDENTIFIER ::= { docsMcastAuthMib 2 } docsMcastAuthMibCompliances OBJECT IDENTIFIER ::= { docsMcastAuthMibConformance 1 } docsMcastAuthMibGroups OBJECT IDENTIFIER ::= { docsMcastAuthMibConformance 2 } docsMcastAuthCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that implement the DOCSIS Multicast Authorization MIB." MODULE -- this MODULE MANDATORY-GROUPS { docsMcastAuthGroup } ::= { docsMcastAuthMibCompliances 1 } docsMcastAuthGroup OBJECT-GROUP OBJECTS { docsMcastAuthCtrlEnable, docsMcastAuthCtrlDefProfileNameList, docsMcastAuthCtrlDefAction, docsMcastAuthCtrlDefMaxNumSess, docsMcastAuthCmtsCmStatusCfgProfileNameList, docsMcastAuthCmtsCmStatusCfgListId, docsMcastAuthCmtsCmStatusMaxNumSess, docsMcastAuthCmtsCmStatusCfgParamFlag, docsMcastAuthProfileSessRulePriority, docsMcastAuthProfileSessRulePrefixAddrType, docsMcastAuthProfileSessRuleSrcPrefixAddr, docsMcastAuthProfileSessRuleSrcPrefixLen, docsMcastAuthProfileSessRuleGrpPrefixAddr, docsMcastAuthProfileSessRuleGrpPrefixLen, docsMcastAuthProfileSessRuleAction, docsMcastAuthProfileSessRuleRowStatus, docsMcastAuthStaticSessRulePriority, docsMcastAuthStaticSessRulePrefixAddrType, docsMcastAuthStaticSessRuleSrcPrefixAddr, docsMcastAuthStaticSessRuleSrcPrefixLen, docsMcastAuthStaticSessRuleGrpPrefixAddr, docsMcastAuthStaticSessRuleGrpPrefixLen, docsMcastAuthStaticSessRuleAction, docsMcastAuthProfilesDescription, docsMcastAuthProfilesRowStatus } STATUS current DESCRIPTION "Group of objects implemented in the CMTS." ::= { docsMcastAuthMibGroups 1 } END