-- ***************************************************************** -- DOCS-QOS3-MIB.my: -- -- Aug 2007 Yueping Ye -- -- Initial Version: Aug 2007: Annex Q.7 from CM-SP-OSSIv3.0-I04-070803 -- -- Copyright (c) 2007 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** DOCS-QOS3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, Counter64 FROM SNMPv2-SMI -- RFC 2578 TEXTUAL-CONVENTION, RowStatus, TruthValue, MacAddress, TimeStamp, StorageType FROM SNMPv2-TC -- RFC 2579 OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- RFC 2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 InterfaceIndex, ifIndex FROM IF-MIB -- RFC 2863 InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB DscpOrAny FROM DIFFSERV-DSCP-TC DocsL2vpnIfList FROM DOCS-L2VPN-MIB AttributeMask, AttrAggrRuleMask, ChSetId, Dsid, ChId, ChannelList FROM DOCS-IF3-MIB clabProjDocsis FROM CLAB-DEF-MIB; docsQos3Mib MODULE-IDENTITY LAST-UPDATED "200708030000Z" -- August 03, 2007 ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO "Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: mibs@cablelabs.com" DESCRIPTION "This MIB module contains the management objects for the management of QOS for channel bonding." REVISION "200708030000Z" -- August 03, 2007 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-07.0480-3 and published as I04" REVISION "200705180000Z" -- May 18, 2007 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-07.0445-3 OSSIv3.0-N-07.0437-4 OSSIv3.0-N-07.0412-2 OSSIv3.0-N-07.0410-4 and published as I03" REVISION "200612071700Z" -- Dec 7, 2006 DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207 Copyright 1999-2007 Cable Television Laboratories, Inc. All rights reserved." ::= { clabProjDocsis 21 } -- Textual Conventions IfDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates a direction on an RF MAC interface. The value downstream(1) is from Cable Modem Termination System to Cable Modem. The value upstream(2) is from Cable Modem to Cable Modem Termination System." SYNTAX INTEGER { downstream(1), upstream(2) } BitRate ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The rate of traffic in unit of bits per second. Used to specify traffic rate for QOS." SYNTAX Unsigned32 SchedulingType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The scheduling service provided by a CMTS for an upstream Service Flow. If the parameter is omitted from an upstream QOS Parameter Set, this object takes the value of bestEffort (2). This parameter must be reported as undefined (1) for downstream QOS Parameter Sets." SYNTAX INTEGER { undefined (1), bestEffort (2), nonRealTimePollingService(3), realTimePollingService(4), unsolictedGrantServiceWithAD(5), unsolictedGrantService(6) } docsQos3MibObjects OBJECT IDENTIFIER ::= { docsQos3Mib 1 } docsQos3PktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3PktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input from an interface or transmitted for output on an interface may be compared against an ordered list of rules pertaining to the packet contents. Each rule is an instance of this object. A matching rule provides a Service Flow ID to which the packet is classified. All rules need to match for a packet to match a classifier. The attibutes in this row correspond to a set of Classifier Encoding parameters in a DOCSIS MAC management message. The BitMap attribute indicates which particular parameters were present in the classifier as signaled in the DOCSIS message. If the referenced parameter was not present in the signaled Classifier, the corresponding attribute in this instance reports a value as specified by that attribute description." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flows and Classifiers section." ::= { docsQos3MibObjects 1} docsQos3PktClassEntry OBJECT-TYPE SYNTAX DocsQos3PktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3PktClassTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of this classifier." INDEX { ifIndex,docsQos3ServiceFlowId,docsQos3PktClassId } ::= { docsQos3PktClassTable 1 } DocsQos3PktClassEntry ::= SEQUENCE { docsQos3PktClassId Unsigned32, docsQos3PktClassDirection IfDirection, docsQos3PktClassPriority Unsigned32, docsQos3PktClassIpTosLow OCTET STRING, docsQos3PktClassIpTosHigh OCTET STRING, docsQos3PktClassIpTosMask OCTET STRING, docsQos3PktClassIpProtocol Unsigned32, docsQos3PktClassIpSourceAddr InetAddress, docsQos3PktClassIpSourceMask InetAddress, docsQos3PktClassIpDestAddr InetAddress, docsQos3PktClassIpDestMask InetAddress, docsQos3PktClassSourcePortStart InetPortNumber, docsQos3PktClassSourcePortEnd InetPortNumber, docsQos3PktClassDestPortStart InetPortNumber, docsQos3PktClassDestPortEnd InetPortNumber, docsQos3PktClassDestMacAddr MacAddress, docsQos3PktClassDestMacMask MacAddress, docsQos3PktClassSourceMacAddr MacAddress, docsQos3PktClassEnetProtocolType INTEGER, docsQos3PktClassEnetProtocol Unsigned32, docsQos3PktClassUserPriLow Unsigned32, docsQos3PktClassUserPriHigh Unsigned32, docsQos3PktClassVlanId Unsigned32, docsQos3PktClassState INTEGER, docsQos3PktClassPkts Counter64, docsQos3PktClassBitMap BITS, docsQos3PktClassIpAddrType InetAddressType, docsQos3PktClassFlowLabel Unsigned32, docsQos3PktClassCmInterfaceMask DocsL2vpnIfList } docsQos3PktClassId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key indicates the assigned identifier to the packet classifier instance by the CMTS, which is unique per Service Flow. For UDCs this corresponds to the Service Flow Reference of the classifier." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Classifier Identifier section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 1 } docsQos3PktClassDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the direction to which the classifier is applied." ::= { docsQos3PktClassEntry 2 } docsQos3PktClassPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the order of evaluation of the classifiers. The higher the value, the higher the priority. The value of 0 is used as default in provisioned Service Flows Classifiers. The default value of 64 is used for dynamic Service Flow Classifiers. If the referenced parameter is not present in a classifier, this attribute reports the default value as defined above." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Rule Priority section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 3 } docsQos3PktClassIpTosLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the low value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this attribute reports the value of 0. The IP TOS octet, as originally defined in RFC 791, has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168). This object is defined as an 8-bit octet as per the DOCSIS Specification for packet classification." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Type of Service Range and Mask and IPv6 Traffic Class Range and Mask sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 4 } docsQos3PktClassIpTosHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the 8-bit high value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this attribute reports the value of 0. The IP TOS octet as originally defined in RFC 791 has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168). This object is defined as an 8-bit octet as defined by the DOCSIS Specification for packet classification." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Type of Service Range and Mask and IPv6 Traffic Class Range and Mask sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 5 } docsQos3PktClassIpTosMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the mask value is bitwise ANDed with TOS byte in an IP packet, and this value is used for range checking of TosLow and TosHigh. If the referenced parameter is not present in a classifier, this attribute reports the value of 0. The IP TOS octet as originally defined in RFC 791 has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168). This object is defined as an 8-bit octet per the DOCSIS Specification for packet classification." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Type of Service Range and Mask and IPv6 Traffic Class Range and Mask sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 6 } docsQos3PktClassIpProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..258) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches traffic with any IP Protocol value. The value 257 by convention matches both TCP and UDP. If the referenced parameter is not present in a classifier, this attibute reports the value of 258." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IP Protocol and IPv6 Next Header Type sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 7 } docsQos3PktClassIpSourceAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rule when the packet IP Source Address bitwise ANDed with the InetSourceMask value equals the InetSourceAddr value. The address type of this object is specified by InetAddressType. If the referenced parameter is not present in a classifier, this object reports the value of '00000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Source Address and IPv6 Source Address sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 8 } docsQos3PktClassIpSourceMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies which bits of a packet's IP Source Address are compared to match this rule. An IP packet matches the rule when the packet source address bitwise ANDed with the InetSourceMask value equals the docsIetfQosIpPktClassInetSourceAddr value. The address type of this attribute is specified by InetAddressType. If the referenced parameter is not present in a classifier, this attribute reports the value of 'FFFFFFFF'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Source Mask and IPv6 Source Prefix Length (bits) sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 9 } docsQos3PktClassIpDestAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches the rule when the packet IP Destination Address bitwise ANDed with the InetDestMask value equals the InetDestAddr value. The address type of this attribute is specified by InetAddressType. If the referenced parameter is not present in a classifier, this attribute reports the value of '00000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Destination Address and IPv6 Destination Address sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 10 } docsQos3PktClassIpDestMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches the rule when the packet destination address bitwise ANDed with the InetDestMask value equals the docsIetfQosIpPktClassInetDestAddr value. The address type of this attribute is specified by InetAddressType. If the referenced parameter is not present in a classifier, this attribute reports the value of 'FFFFFFFF'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Destination Mask and IPv6 Destination Prefix Length (bits) sections in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 11 } docsQos3PktClassSourcePortStart OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the low-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP IP packets. If the referenced parameter is not present in a classifier, this attribute reports the value of 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Source Port Start section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 12 } docsQos3PktClassSourcePortEnd OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the high-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP IP packets. If the referenced parameter is not present in a classifier, this attribute reports the value of 65535." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Source Port End section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 13 } docsQos3PktClassDestPortStart OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the low-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the referenced parameter is not present in a classifier, this attribute reports the value of 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Destination Port Start section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 14 } docsQos3PktClassDestPortEnd OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the high-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the referenced parameter is not present in a classifier, this attribute reports the value of 65535." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Destination Port End section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 15 } docsQos3PktClassDestMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with DestMacMask equals the value of DestMacAddr. If the referenced parameter is not present in a classifier, this attribute reports the value of '000000000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Destination MAC Address section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 16 } docsQos3PktClassDestMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with DestMacMask equals the value of DestMacAddr. If the referenced parameter is not present in a classifier, this attribute reports the value of '000000000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Destination MAC Address section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 17 } docsQos3PktClassSourceMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An Ethernet packet matches this entry when its source MAC address equals the value of this attribute. If the referenced parameter is not present in a classifier, this attribute reports the value of 'FFFFFFFFFFFF'" REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Source MAC Address section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 18 } docsQos3PktClassEnetProtocolType OBJECT-TYPE SYNTAX INTEGER { none(0), ethertype(1), dsap(2), mac(3), all(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol type as a matching criteria. A value of 'ethertype' means that the rule applies only to frames that contain an EtherType value. Ethertype values are contained in packets using the Dec-Intel-Xerox (DIX) encapsulation or the RFC1042 Sub-Network Access Protocol (SNAP) encapsulation formats. A value of 'dsap' means that the rule applies only to frames using the IEEE802.3 encapsulation format with a Destination Service Access Point (DSAP) other than 0xAA (which is reserved for SNAP). A value of 'mac' means that the rule applies only to MAC management messages for MAC management messages. A value of 'all' means that the rule matches all Ethernet packets. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in a classifier, this attribute reports the value of 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Ethertype/DSAP/MacType section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 19 } docsQos3PktClassEnetProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "If EnetProtocolType is 'none', this attribute is ignored when considering whether a packet matches the current rule. If EnetProtocolType is 'ethertype', this attribute gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If EnetProtocolType is 'dsap', the lower 8 bits of this attribute's value must match the DSAP byte of the packet in order to match the rule. If EnetProtocolType is 'mac', the lower 8 bits of this attribute's value represent a lower bound (inclusive) of MAC management message type codes matched, and the upper 8 bits represent the upper bound (inclusive) of matched MAC message type codes. Certain message type codes are excluded from matching, as specified in the reference. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this attribute is reported as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Ethertype/DSAP/MacType section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 20 } docsQos3PktClassUserPriLow OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute applies only to Ethernet frames using the 802.1P/Q tag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of PriLow to PriHigh in order to match this rule. If the referenced parameter is not present in the classifier, the value of this attribute is reported as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IEEE 802.1P User_Priority section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 22 } docsQos3PktClassUserPriHigh OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of PriLow to PriHigh in order to match this rule. If the referenced parameter is not present in the classifier, the value of this attribute is reported as 7." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IEEE 802.1P User_Priority section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 23 } docsQos3PktClassVlanId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute applies only to Ethernet frames using the 802.1P/Q tag header. Tagged packets must have a VLAN Identifier that matches the value in order to match the rule. If the referenced parameter is not present in the classifier, the value of this attribute is reported as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IEEE 802.1Q VLAN_ID section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 24 } docsQos3PktClassState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not the classifier is enabled to classify packets to a Service Flow. If the referenced parameter is not present in the classifier, the value of this attribute is reported as 'true'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Classifier Activation State section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 25 } docsQos3PktClassPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of packets that have been classified using this entry. This includes all packets delivered to a Service Flow maximum rate policing function, whether or not that function drops the packets. This counter's last discontinuity is the ifCounterDiscontinuityTime for the same ifIndex that indexes this attribute." ::= { docsQos3PktClassEntry 26 } docsQos3PktClassBitMap OBJECT-TYPE SYNTAX BITS { rulePriority(0), activationState(1), ipTos(2), ipProtocol(3), ipSourceAddr(4), ipSourceMask(5), ipDestAddr(6), ipDestMask(7), sourcePortStart(8), sourcePortEnd(9), destPortStart(10), destPortEnd(11), destMac(12), sourceMac(13), ethertype(14), userPri(15), vlanId(16), flowLabel(17), cmInterfaceMask(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates which parameter encodings were actually present in the DOCSIS packet classifier encoding signaled in the DOCSIS message that created or modified the classifier. Note that Dynamic Service Change messages have replace semantics, so that all non-default parameters must be present whether the classifier is being created or changed. A bit of this attribute is set to 1 if the parameter indicated by the comment was present in the classifier encoding, and to 0 otherwise. Note that BITS are encoded most significant bit first, so that if, for example, bits 6 and 7 are set, this attribute is encoded as the octet string '030000'H." ::= { docsQos3PktClassEntry 27 } docsQos3PktClassIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the type of the Internet address for InetSourceAddr, InetSourceMask, InetDestAddr, and InetDestMask. If the referenced parameter is not present in a classifier, this object reports the value of 'ipv4'." ::= { docsQos3PktClassEntry 28 } docsQos3PktClassFlowLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specified as part of the classifier and is not matched against the packets." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv6 Flow Label section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 29 } docsQos3PktClassCmInterfaceMask OBJECT-TYPE SYNTAX DocsL2vpnIfList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a bit-mask of the CM in-bound interfaces to which this classifer applies. This attribute only applies to QOS upstream Classifiers and upstream Drop Classifiers. For QOS downstream classifiers this object reports the zero-length string." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, CM Interface Mask (CMIM) Encoding section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 30 } docsQos3ParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of QOS parameters defined in a managed device. DOCSIS 1.0 COS service profiles are not represented in this object. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages.Each attribute of an instance of this object corresponds to one or part of oneService Flow Encoding. The BitMap attribute indicates which particular parameters were signaled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signaled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding attribute in this object instance. Many attributes are not applicable, depending on the Service Flow direction, upstream scheduling type or Service Flow bonding configuration. The attribute value reported in this case is specified by those attributes descriptions." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 2} docsQos3ParamSetEntry OBJECT-TYPE SYNTAX DocsQos3ParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ParamSetTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of this Qos Param Set." INDEX { ifIndex,docsQos3ParamSetType,docsQos3ParamSetServiceFlowId } ::= { docsQos3ParamSetTable 1 } DocsQos3ParamSetEntry ::= SEQUENCE { docsQos3ParamSetServiceClassName SnmpAdminString, docsQos3ParamSetPriority Unsigned32, docsQos3ParamSetMaxTrafficRate BitRate, docsQos3ParamSetMaxTrafficBurst Unsigned32, docsQos3ParamSetMinReservedRate BitRate, docsQos3ParamSetMinReservedPkt Unsigned32, docsQos3ParamSetActiveTimeout Unsigned32, docsQos3ParamSetAdmittedTimeout Unsigned32, docsQos3ParamSetMaxConcatBurst Unsigned32, docsQos3ParamSetSchedulingType SchedulingType, docsQos3ParamSetNomPollInterval Unsigned32, docsQos3ParamSetTolPollJitter Unsigned32, docsQos3ParamSetUnsolicitGrantSize Unsigned32, docsQos3ParamSetNomGrantInterval Unsigned32, docsQos3ParamSetTolGrantJitter Unsigned32, docsQos3ParamSetGrantsPerInterval Unsigned32, docsQos3ParamSetTosAndMask OCTET STRING, docsQos3ParamSetTosOrMask OCTET STRING, docsQos3ParamSetMaxLatency Unsigned32, docsQos3ParamSetType INTEGER, docsQos3ParamSetRequestPolicyOct OCTET STRING, docsQos3ParamSetBitMap BITS, docsQos3ParamSetServiceFlowId Unsigned32, docsQos3ParamSetRequiredAttrMask AttributeMask, docsQos3ParamSetForbiddenAttrMask AttributeMask, docsQos3ParamSetAttrAggrRuleMask AttrAggrRuleMask, docsQos3ParamSetAppId Unsigned32, docsQos3ParamSetMultiplierContentionReqWindow Unsigned32, docsQos3ParamSetMultiplierBytesReq Unsigned32, docsQos3ParamSetMaxReqPerSidCluster Unsigned32, docsQos3ParamSetMaxOutstandingBytesPerSidCluster Unsigned32, docsQos3ParamSetMaxTotBytesReqPerSidCluster Unsigned32, docsQos3ParamSetMaxTimeInSidCluster Unsigned32, docsQos3ParamSetPeakTrafficRate Unsigned32, docsQos3ParamSetDsResequencing INTEGER } docsQos3ParamSetServiceClassName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Service Class Name from which the parameter set values were derived. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns the zero-length string." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Class Name section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 4 } docsQos3ParamSetPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the relative priority of a Service Flow. Higher numbers indicate higher priority. This priority should only be used to differentiate Service Flow from identical parameter sets. This attribute returns 0 if the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set or if the parameter is not applicable." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Traffic Priority section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 5 } docsQos3ParamSetMaxTrafficRate OBJECT-TYPE SYNTAX BitRate UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the maximum sustained traffic rate allowed for this Service Flow in bits/sec. It counts all MAC frame data PDUs from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited during any time interval. The value 0 means no maximum traffic rate is enforced. This attribute applies to both upstream and downstream Service Flows. This attribute returns 0 if the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, or if the parameter is not applicable." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Sustained Traffic Rate section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 6 } docsQos3ParamSetMaxTrafficBurst OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. This object is applied in conjunction with MaxTrafficRate to calculate maximum sustained traffic rate. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns 3044 for scheduling types 'bestEffort', 'nonRealTimePollingService' and 'realTimePollingService'. If this parameter is not applicable, it is reported as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Traffic Burst section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 7 } docsQos3ParamSetMinReservedRate OBJECT-TYPE SYNTAX BitRate UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the guaranteed minimum rate in bits/sec for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. The value of 0 indicates that no bandwidth is reserved. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns 0. If the parameter is not applicable, it is reported as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Minimum Reserved Traffic Rate section of the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 8 } docsQos3ParamSetMinReservedPkt OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies an assumed minimum packet size in bytes for which the MinReservedRate will be provided. The value is calculated from the byte following the MAC header HCS to the end of the CRC. If the referenced parameter is omitted from a DOCSIS QOS parameter set, the used and reported value is CMTS implementation and the CM reports a value of 0. If the referenced parameter is not applicable to the direction or scheduling type of the Service Flow, both CMTS and CM report the value 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Assumed Minimum Reserved Rate Packet Size, in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 9 } docsQos3ParamSetActiveTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum duration in seconds that resources remain unused on an active service flow before the CMTS signals that both the active and admitted parameter sets are null. The value 0 signifies an infinite amount of time. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Timeout for Active QoS Parameters section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 10 } docsQos3ParamSetAdmittedTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum duration in seconds that resources remain in admitted state before resources must be released. The value of 0 signifies an infinite amount of time. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns 200." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Timeout for Admitted QoS Parameters section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 11 } docsQos3ParamSetMaxConcatBurst OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum concatenated burst in bytes that an upstream Service Flow is allowed. The value is calculated from the FC byte of the Concatenation MAC Header to the last CRC byte of the last concatenated MAC frame, inclusive. The value of 0 specifies no maximum burst. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns the value of 1522 for scheduling types 'bestEffort', 'nonRealTimePollingService', and 'realTimePollingService'. If the parameter is not applicable, it is reported as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Concatenated Burst section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 12 } docsQos3ParamSetSchedulingType OBJECT-TYPE SYNTAX SchedulingType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the upstream scheduling service used for upstream Service Flow. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set of an upstream Service Flow, this attribute returns the value of 'bestEffort'. For QOS parameter sets of downstream Service Flows, this attribute's value is reported as 'undefined'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Scheduling Type section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 13 } docsQos3ParamSetNomPollInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the nominal interval in microseconds between successive unicast request opportunities on an upstream Service Flow. This attribute applies only to upstream Service Flows with SchedulingType of value 'nonRealTimePollingService', 'realTimePollingService', and 'unsolictedGrantServiceWithAD'. The parameter is mandatory for 'realTimePollingService'. If the parameter is omitted with 'nonRealTimePollingService', the CMTS uses an implementation-dependent value. If the parameter is omitted with 'unsolictedGrantServiceWithAD(5)' the CMTS uses the value of the Nominal Grant Interval parameter. In all cases, the CMTS reports the value it is using when the parameter is applicable. The CM reports the signaled parameter value if it was signaled. Otherwise, it returns 0. If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this attribute's value as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Polling Interval section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 14 } docsQos3ParamSetTolPollJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic schedule on an upstream Service Flow. This parameter is applicable only to upstream Service Flows with a SchedulingType of 'realTimePollingService' or 'unsolictedGrantServiceWithAD'. If the referenced parameter is applicable but not present in the corresponding DOCSIS QOS Parameter Set, the CMTS uses an implementation-dependent value and reports the value it is using. The CM reports a value of 0 in this case. If the parameter is not applicable to the direction or upstream scheduling type of the Service Flow, both CMTS and CM report this attribute's value as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Tolerated Poll Jitter section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 15 } docsQos3ParamSetUnsolicitGrantSize OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the unsolicited grant size in bytes. The grant size includes the entire MAC frame data PDU from the Frame Control byte to the end of the MAC frame. The referenced parameter is applicable only for upstream flows with a SchedulingType of 'unsolicitedGrantServicewithAD' or 'unsolicitedGrantService', and it is mandatory when applicable. Both CMTS and CM report the signaled value of the parameter in this case. If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this attribute's value as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Unsolicited Grant Size section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 16 } docsQos3ParamSetNomGrantInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the nominal interval in microseconds between successive data grant opportunities on an upstream Service Flow. The referenced parameter is applicable only for upstream flows with a SchedulingType of 'unsolicitedGrantServicewithAD' or 'unsolicitedGrantService(6)', and it is mandatory when applicable. Both CMTS and CM report the signaled value of the parameter in this case. If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this attribute's value as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Nominal Grant Interval section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 17 } docsQos3ParamSetTolGrantJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum amount of time in microseconds that the transmission opportunities may be delayed from the nominal periodic schedule. The referenced parameter is applicable only for upstream flows with a SchedulingType of 'unsolicitedGrantServicewithAD' or 'unsolicitedGrantService(6)', and it is mandatory when applicable. Both CMTS and CM report the signaled value of the parameter in this case. If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this attribute's value as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Tolerated Grant Jitter section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 18 } docsQos3ParamSetGrantsPerInterval OBJECT-TYPE SYNTAX Unsigned32 (0..127) UNITS "dataGrants" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the number of data grants per Nominal Grant Interval (NomGrantInterval). The referenced parameter is applicable only for upstream flows with a SchedulingType of 'unsolicitedGrantServicewithAD' or 'unsolicitedGrantService', and it is mandatory when applicable. Both CMTS and CM report the signaled value of the parameter in this case. If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this attribute's value as 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Grants per Interval section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 19 } docsQos3ParamSetTosAndMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the AND mask for the IP TOS byte for overwriting an IPv4 packet's TOS value or IPv6 packet's Traffic Class value. The IP packet TOS byte is bitwise ANDed with TosAndMask, then the result is bitwise ORed with TosORMask and the result is written to the IP packet TOS byte. A value of 'FF'H for TosAndMask and a value of '00'H for TosOrMask means that the IP Packet TOS byte is not overwritten. This combination is reported if the referenced parameter is not present in a QOS Parameter Set. The IP TOS octet as originally defined in RFC 791 has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168). The IPv6 Traffic Class octet RFC 2460 is consistent with that new definition. Network operators SHOULD avoid specifying values of TosAndMask and TosORMask that would result in the modification of the ECN bits. In particular, operators should not use values of TosAndMask that have either of the least-significant two bits set to 0. Similarly, operators should not use values of TosORMask that have either of the least-significant two bits set to 1. Even though this attribute is only enforced by the CMTS, the CM reports the value as signaled in the referenced parameter." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IP Type Of Service (DSCP) Overwrite section in the Common Radio Frequency Interface Encodings Annex; [RFC 3168]; [RFC 3260]; [RFC 2460]; [RFC 791]." ::= { docsQos3ParamSetEntry 20 } docsQos3ParamSetTosOrMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the OR mask for the IPv4 TOS value or IPv6 Traffic Class value. See the description of TosAndMask for further details. The IP TOS octet, as originally defined in RFC 791 has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168). The IPv6 Traffic Class octet RFC 2460 is consistent with that new definition. Network operators SHOULD avoid specifying values of TosAndMask and TosORMask that would result in the modification of the ECN bits." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IP Type Of Service (DSCP) Overwrite section in the Common Radio Frequency Interface Encodings Annex; [RFC 3168]; [RFC 3260]; [RFC 2460]; [RFC 791]." ::= { docsQos3ParamSetEntry 21 } docsQos3ParamSetMaxLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum latency between the reception of a packet by the CMTS on its NSI and the forwarding of the packet to the RF interface. A value of 0 signifies no maximum latency is enforced. This attribute only applies to downstream Service Flows. If the referenced parameter is not present in the corresponding downstream DOCSIS QOS Parameter Set, this attribute returns 0. This parameter is not applicable to upstream DOCSIS QOS Parameter Sets, so its value is reported as 0 in that case." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Downstream Latency section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 22 } docsQos3ParamSetType OBJECT-TYPE SYNTAX INTEGER { active (1), admitted(2), provisioned(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the QoS Parameter Set Type of the Service Flow. The following values are defined: 'active' Indicates the Active QOS parameter set, describing the service currently being provided by the DOCSIS MAC domain to the service flow. 'admitted' Indicates the Admitted QOS Parameter Set, describing services reserved by the DOCSIS MAC domain for use by the service flow. 'provisioned' Indicates the QOS Parameter Set defined in the DOCSIS CM Configuration file for the service flow." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Scheduling Type section in the Common Radio Frequency Interface Encodings Annex; [RFC 4323]." ::= { docsQos3ParamSetEntry 23 } docsQos3ParamSetRequestPolicyOct OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) -- A 32-bit mask represented most significant byte -- first. The 32-bit integer represented in this -- manner equals the binary value of the referenced -- integer parameter of the DOCSIS RFI -- specification. -- The BITS syntax is not used in order to avoid -- the confusion caused by different bit-numbering -- conventions. MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies which transmit interval opportunities the CM omits for upstream transmission requests and packet transmissions. This object takes its default value for downstream Service Flows. Unless otherwise indicated, a bit value of 1 means that a CM must not use that opportunity for upstream transmission. The format of this string enumerated the bits from 0 to 31 from left to right, for example bit 0 corresponds to the left most bit of the fourth octet. (octets numbered from right to left). The bit positions are defined as follows: 'broadcastReqOpp' all CMs broadcast request opportunities 'priorityReqMulticastReq' priority request multicast request opportunities 'reqDataForReq' request/data opportunities for requests 'reqDataForData' request/data opportunities for data 'piggybackReqWithData' piggyback requests with data 'concatenateData' concatenate data 'fragmentData' fragment data 'suppressPayloadHeaders' suppress payload headers 'dropPktsExceedUGSize' A value of 1 means that the service flow must drop packets that do not fit in the Unsolicited Grant size. If the referenced parameter is not present in a QOS Parameter Set, the value of this object is reported as '00000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Request/ Transmission Policy section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 24 } docsQos3ParamSetBitMap OBJECT-TYPE SYNTAX BITS { trafficPriority(0), maxTrafficRate(1), maxTrafficBurst(2), minReservedRate(3), minReservedPkt(4), activeTimeout(5), admittedTimeout(6), maxConcatBurst(7), schedulingType(8), requestPolicy(9), nomPollInterval(10), tolPollJitter(11), unsolicitGrantSize(12), nomGrantInterval(13), tolGrantJitter(14), grantsPerInterval(15), tosOverwrite(16), maxLatency(17), requiredAttrMask(18), forbiddenAttrMask(19), attrAggrMask(20), applicationId(21), multipCntnReqWindow(22), multipBytesReq(23), maxReqPerSidCluster(24), maxOutstandingBytesPerSidCluster(25), maxTotalBytesReqPerSidCluster(26), maximumTimeInSidCluster(27), peakTrafficRate(28), dsResequencing(29) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the set of QOS Parameter Set parameters actually signaled in the DOCSIS registration or dynamic service request message that created or modified the QOS Parameter Set. A bit is set to 1 when the associated parameter is present in the original request as follows: 'trafficPriority' Traffic Priority 'maxTrafficRate' Maximum Sustained Traffic Rate 'maxTrafficBurst' Maximum Traffic Burst 'minReservedRate' Minimum Reserved Traffic Rate 'minReservedPkt' Assumed Minimum Reserved Rate Packet Size 'activeTimeout' Timeout for Active QoS Parameters 'admittedTimeout' Timeout for Admitted QoS Parameters 'maxConcatBurst' Maximum Concatenated Burst 'schedulingType' Service Flow Scheduling Type 'requestPolicy' Request/Transmission Policy 'nomPollInterval' Nominal Polling Interval 'tolPollJitter' Tolerated Poll Jitter 'unsolicitGrantSize' Unsolicited Grant Size 'nomGrantInterval' Nominal Grant Interval 'tolGrantJitter' Tolerated Grant Jitter 'grantsPerInterval' Grants per Interval 'tosOverwrite' IP Type of Service (DSCP) Overwrite 'maxLatency' Maximum Downstream Latency 'requiredAttrMask' Service Flow Required Attribute Mask 'forbiddenAttrMask Service Flow Forbidden Attribute Mask 'attrAggrMask' Service Flow Attribute Aggregation Mask 'applicationId' Application Identifier 'multipCntnReqWindow' Multiplier to Contention Request Backoff Window 'multipBytesReq' Multiplier to Number of Bytes Requested 'maxReqPerSidCluster' Maximum Requests per SID Cluster 'maxOutstandingBytesPerSidCluster' Maximum Outstanding Bytes per SID Cluster 'maxTotalBytesReqPerSidCluster' Maximum Total Bytes Requested per SID Cluster 'maximumTimeInSidCluster' Maximum Time in the SID Cluster 'peakTrafficRate' Downstream Peak Traffic Rate 'dsResequencing' Downstream Resequencing Note that when Service Class names are expanded, the registration or dynamic response message may contain parameters expanded by the CMTS based on a stored service class. These expanded parameters are not indicated by a 1 bit in this attribute. Note that even though some QOS Parameter Set parameters may not be signaled in a message (so that the parameter's bit in this object is 0), the DOCSIS specification requires that default values be used. These default values are reported as the corresponding attribute." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 25 } docsQos3ParamSetServiceFlowId OBJECT-TYPE SYNTAX Unsigned32 (1.. 4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the Service Flow ID for the service flow." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Identifier section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 26 } docsQos3ParamSetRequiredAttrMask OBJECT-TYPE SYNTAX AttributeMask MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the Required Attribute Mask to compare with the Provisioned Required Attributes when selecting the bonding groups for the service flow. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns '00000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Required Attribute Mask section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 27 } docsQos3ParamSetForbiddenAttrMask OBJECT-TYPE SYNTAX AttributeMask MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the Forbidden Attribute Mask to compare with the Provisioned Forbidden Attributes when selecting the bonding groups for the service flow. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns '00000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Forbidden Attribute Mask section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 28 } docsQos3ParamSetAttrAggrRuleMask OBJECT-TYPE SYNTAX AttrAggrRuleMask MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the Attribute Aggregation Mask to compare the Service Flow Required and Forbidden Attributes with the CMTS dynamically-created bonding group when selecting the bonding groups for the service flow. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns '00000000'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Attribute Aggregation Mask section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 29 } docsQos3ParamSetAppId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Application Identifier associated with the service flow for purposes beyond the scope of this specification. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Application Identifier section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 30 } docsQos3ParamSetMultiplierContentionReqWindow OBJECT-TYPE SYNTAX Unsigned32 (4..12) UNITS "eighths" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the multiplier to be applied by a CM when performing contention request backoff for data requests. This attribute only applies to upstream Service Flows in 3.0 operation. If the referenced parameter is not present in the upstream DOCSIS QOS Parameter Set or is not applicable, this attribute returns 8." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Multiplier to Contention Request Backoff Window section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 31 } docsQos3ParamSetMultiplierBytesReq OBJECT-TYPE SYNTAX Unsigned32 (1 | 2 | 4 | 8 | 16) UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the assumed bandwidth request multiplier. This attribute only applies to upstream Service Flows in 3.0 operation. If the referenced parameter is not present in the upstream DOCSIS QOS Parameter Set, or is not applicable, this attribute returns 4." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Multiplier to Number of Bytes Requested section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 32 } docsQos3ParamSetMaxReqPerSidCluster OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum number of requests that a CM can make within a given SID Cluster before it must switch to a different SID Cluster to make further requests. A value of 0 indicates there is no limit. This attribute only applies to upstream Service Flows in 3.0 operation, in other cases it is reported as 0. If the referenced parameter is not present in the DOCSIS QOS Parameter Set, this attribute returns 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Requests per SID Cluster section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 33 } docsQos3ParamSetMaxOutstandingBytesPerSidCluster OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum number of bytes for which a CM can have requests outstanding on a given SID Cluster. If defined number of bytes are outstanding and further requests are required, the CM must switch to a different SID Cluster if one is available. A value of 0 indicates there is no limit. This attribute only applies to upstream Service Flows in 3.0 operation, in other cases it is reported as 0. If the referenced parameter is not present in the DOCSIS QOS Parameter Set, this attribute returns 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Outstanding Bytes per SID Cluster section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 34 } docsQos3ParamSetMaxTotBytesReqPerSidCluster OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum total number of bytes a CM can have requested using a given SID Cluster before it must switch to a different SID Cluster to make further requests. A value of 0 indicates there is no limit. This attribute only applies to upstream Service Flows in 3.0 operation, in other cases it is reported as 0. If the referenced parameter is not present in the DOCSIS QOS Parameter Set, this attribute returns 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Total Bytes Requested per SID Cluster section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 35 } docsQos3ParamSetMaxTimeInSidCluster OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum time in milliseconds that a CM may use a particular SID Cluster before it must switch to a different SID Cluster to make further requests. A value of 0 indicates there is no limit. This attribute only applies to upstream Service Flows in 3.0 operation, in other cases it is reported as 0. If the referenced parameter is not present in the DOCSIS QOS Parameter Set, this attribute returns 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Maximum Time in the SID Cluster section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 36 } docsQos3ParamSetPeakTrafficRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the rate parameter 'P' of a token-bucket-based peak rate limiter for packets of a downstream service flow. A value of 0 signifies no Downstream Peak Traffic Rate is enforced. This attribute only applies to downstream Service Flows. If the referenced parameter is not present in the corresponding downstream DOCSIS QOS Parameter Set, this attribute returns 0. This parameter is not applicable to upstream DOCSIS QOS Parameter Sets, so its value is reported as 0 in that case." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Downstream Peak Traffic Rage section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 37 } docsQos3ParamSetDsResequencing OBJECT-TYPE SYNTAX INTEGER { resequencingDsid(0), noResequencingDsid(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies if a resequending DSID need to be allocated to the service flow. The value 'resequencingDsid' indicates that a resequencing DSID is required if the service flow is assigned to a downstream bonding group. The value 'noResequencingDsid' indicates no resequencing DSID is associated with the service flow. This attribute only applies to downstream Service Flows in 3.0 operation. If the referenced parameter is not present in the corresponding downstream DOCSIS QOS Parameter Set, this attribute returns 0. This parameter is not applicable to upstream DOCSIS QOS Parameter Sets, so its value is reported as 0 in that case." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Downstream Peak Traffic Rage section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ParamSetEntry 38 } docsQos3ServiceFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ServiceFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of DOCSIS-QOS Service Flows in a managed device." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service lows and Classifiers section." ::= { docsQos3MibObjects 3} docsQos3ServiceFlowEntry OBJECT-TYPE SYNTAX DocsQos3ServiceFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ServiceFlowTable. The ifIndex key corresponds to the MAC Domain interface of this service flow." INDEX { ifIndex,docsQos3ServiceFlowId } ::= { docsQos3ServiceFlowTable 1 } DocsQos3ServiceFlowEntry ::= SEQUENCE { docsQos3ServiceFlowId Unsigned32, docsQos3ServiceFlowSID Unsigned32, docsQos3ServiceFlowDirection IfDirection, docsQos3ServiceFlowPrimary TruthValue, docsQos3ServiceFlowParamSetTypeStatus BITS, docsQos3ServiceFlowChSetId ChSetId, docsQos3ServiceFlowAttrAssignSuccess TruthValue, docsQos3ServiceFlowDsid Dsid } docsQos3ServiceFlowId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an identifier assigned to a Service Flow by CMTS within a MAC Domain. The value 0 is used only for the purpose of reporting instances of the PktClass object pertaining UDCs and not used for association of QOS classifiers to service flows." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Identifier section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ServiceFlowEntry 1 } docsQos3ServiceFlowSID OBJECT-TYPE SYNTAX Unsigned32 (0..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "Service Identifier (SID) assigned to an admitted or active Service Flow. This attribute reports a value of 0 if a Service ID is not associated with the Service Flow. Only active or admitted upstream Service Flows will have a Service ID (SID)." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Identifier section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ServiceFlowEntry 6 } docsQos3ServiceFlowDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the direction of the Service Flow." ::= { docsQos3ServiceFlowEntry 7 } docsQos3ServiceFlowPrimary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reflects whether Service Flow is the primary or a secondary Service Flow." ::= { docsQos3ServiceFlowEntry 8 } docsQos3ServiceFlowParamSetTypeStatus OBJECT-TYPE SYNTAX BITS { active(0), admitted(1), provisioned(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the status of the service flow based on the admission state. 'active' bit set to '1' indicates that the service flow is active and that the corresponding QOS ParamSet is stored in the CMTS. 'admitted' bit set to '1' indicates that the service flow resources were reserved and that the corresponding QOS ParamSet is stored in the CMTS. 'provisioned' bit set to '1' indicates that the service flow was defined in the CM config file and that the corresponding QOS ParamSet is stored in the CMTS." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Section." ::= { docsQos3ServiceFlowEntry 9 } docsQos3ServiceFlowChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Channel Set Id associated with the service flow." ::= { docsQos3ServiceFlowEntry 10 } docsQos3ServiceFlowAttrAssignSuccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If set to 'true', this attribute indicates that the current channel set associated with the service flow meets the Required and Forbidden Attribute Mask encodings." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow section." ::= { docsQos3ServiceFlowEntry 11 } docsQos3ServiceFlowDsid OBJECT-TYPE SYNTAX Dsid MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the DSID associated with the downstream service flow. downstream service flows without a DSID or upstream Service Flows report the value zero." ::= { docsQos3ServiceFlowEntry 12 } docsQos3ServiceFlowStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ServiceFlowStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes statistics associated with the Service Flows in a managed device." ::= { docsQos3MibObjects 4} docsQos3ServiceFlowStatsEntry OBJECT-TYPE SYNTAX DocsQos3ServiceFlowStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ServiceFlowStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow." INDEX { ifIndex,docsQos3ServiceFlowId } ::= { docsQos3ServiceFlowStatsTable 1 } DocsQos3ServiceFlowStatsEntry ::= SEQUENCE { docsQos3ServiceFlowPkts Counter64, docsQos3ServiceFlowOctets Counter64, docsQos3ServiceFlowTimeCreated TimeStamp, docsQos3ServiceFlowTimeActive Counter32, docsQos3ServiceFlowPHSUnknowns Counter32, docsQos3ServiceFlowPolicedDropPkts Counter32, docsQos3ServiceFlowPolicedDelayPkts Counter32 } docsQos3ServiceFlowPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "For outgoing Service Flows, this attribute counts the number of Packet Data PDUs forwarded to this Service Flow. For incoming upstream CMTS service flows, this attribute counts the number of Packet Data PDUs actually received on the Service Flow identified by the SID for which the packet was scheduled. CMs not classifying downstream packets may report this attribute's value as 0 for downstream Service Flows. This attribute does not count MAC-specific management messages. Particularly for UGS flows, packets sent on the primary Service Flow in violation of the UGS grant size should be counted only by the instance of this attribute that is associated with the primary service flow. Unclassified upstream user data packets (i.e., non- MAC-management) forwarded to the primary upstream Service Flow should be counted by the instance of this attribute that is associated with the primary service flow. This attribute does include packets counted by ServiceFlowPolicedDelayPkts, but does not include packets counted by ServiceFlowPolicedDropPkts and ServiceFlowPHSUnknowns. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3ServiceFlowStatsEntry 1 } docsQos3ServiceFlowOctets OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the count of the number of octets from the byte after the MAC header HCS to the end of the CRC for all packets counted in the ServiceFlowPkts attribute for this row. Note that this counts the octets after payload header suppression and before payload header expansion have been applied. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3ServiceFlowStatsEntry 2 } docsQos3ServiceFlowTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the value of sysUpTime when the service flow was created." ::= { docsQos3ServiceFlowStatsEntry 3 } docsQos3ServiceFlowTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of seconds that the service flow has been active. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3ServiceFlowStatsEntry 4 } docsQos3ServiceFlowPHSUnknowns OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "For incoming upstream CMTS service flows, this attribute counts the number of packets received with an unknown payload header suppression index. The service flow is identified by the SID for which the packet was scheduled. On a CM, only this attribute's instance for the primary downstream service flow counts packets received with an unknown payload header suppression index. All other downstream service flows on CM report this attributes value as 0. All outgoing service flows report this attribute's value as 0. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3ServiceFlowStatsEntry 5 } docsQos3ServiceFlowPolicedDropPkts OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "For outgoing service flows, this attribute counts the number of Packet Data PDUs classified to this service flow dropped due to: (1) implementation-dependent excessive delay while enforcing the Maximum Sustained Traffic Rate; or (2) UGS packets dropped due to exceeding the Unsolicited Grant Size with a Request/Transmission policy that requires such packets to be dropped. Classified packets dropped due to other reasons must be counted in ifOutDiscards for the interface of this service flow. This attribute reports 0 for incoming service flows. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3ServiceFlowStatsEntry 6 } docsQos3ServiceFlowPolicedDelayPkts OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts only outgoing packets delayed in order to maintain the Maximum Sustained Traffic Rate. This attribute will always report a value of 0 for UGS flows because the Maximum Sustained Traffic Rate does not apply. This attribute is 0 for incoming service flows. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3ServiceFlowStatsEntry 7 } docsQos3UpstreamStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3UpstreamStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes statistics associated with upstream service flows. All counted frames must be received without a Frame Check Sequence (FCS) error." ::= { docsQos3MibObjects 5} docsQos3UpstreamStatsEntry OBJECT-TYPE SYNTAX DocsQos3UpstreamStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3UpstreamStatsTable. The ifIndex key corresponds to the upstream logical channel interface of the service flow." INDEX { ifIndex,docsQos3SID } ::= { docsQos3UpstreamStatsTable 1 } DocsQos3UpstreamStatsEntry ::= SEQUENCE { docsQos3SID Unsigned32, docsQos3UpstreamFragments Counter32, docsQos3UpstreamFragDiscards Counter32, docsQos3UpstreamConcatBursts Counter32 } docsQos3SID OBJECT-TYPE SYNTAX Unsigned32 (1..16383) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key identifies a service ID for an admitted or active upstream service flow." ::= { docsQos3UpstreamStatsEntry 1 } docsQos3UpstreamFragments OBJECT-TYPE SYNTAX Counter32 UNITS "fragments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribure indicates the number of fragmentation headers received on an upstream service flow, regardless of whether the fragment was correctly reassembled into a valid packet. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3UpstreamStatsEntry 2 } docsQos3UpstreamFragDiscards OBJECT-TYPE SYNTAX Counter32 UNITS "fragments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of upstream fragments discarded and not assembled into a valid upstream packet. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3UpstreamStatsEntry 3 } docsQos3UpstreamConcatBursts OBJECT-TYPE SYNTAX Counter32 UNITS "headers" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of concatenation headers received on an upstream service flow. This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index." ::= { docsQos3UpstreamStatsEntry 4 } docsQos3DynamicServiceStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3DynamicServiceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes statistics associated with the Dynamic Service Flows, Dynamic Channel Changes and Dynamic Bonding Changes in a managed device within a MAC Domain. For each MAC Domain there are two instances for the for the upstream and downstream direction. On the CMTS, the downstream direction instance indicates messages transmitted or transactions originated by the CMTS. The upstream direction intance indicates messages received or transaction originated by the CM. On the CM, the downstream direction instance indicates messages received or transactions originated by the CMTS. The upstream direction instance indicates messages transmitted by the CM or transactions originated by the CM." ::= { docsQos3MibObjects 6} docsQos3DynamicServiceStatsEntry OBJECT-TYPE SYNTAX DocsQos3DynamicServiceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3DynamicServiceStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow." INDEX { ifIndex,docsQos3IfDirection } ::= { docsQos3DynamicServiceStatsTable 1 } DocsQos3DynamicServiceStatsEntry ::= SEQUENCE { docsQos3IfDirection IfDirection, docsQos3DSAReqs Counter32, docsQos3DSARsps Counter32, docsQos3DSAAcks Counter32, docsQos3DSCReqs Counter32, docsQos3DSCRsps Counter32, docsQos3DSCAcks Counter32, docsQos3DSDReqs Counter32, docsQos3DSDRsps Counter32, docsQos3DynamicAdds Counter32, docsQos3DynamicAddFails Counter32, docsQos3DynamicChanges Counter32, docsQos3DynamicChangeFails Counter32, docsQos3DynamicDeletes Counter32, docsQos3DynamicDeleteFails Counter32, docsQos3DCCReqs Counter32, docsQos3DCCRsps Counter32, docsQos3DCCAcks Counter32, docsQos3DCCs Counter32, docsQos3DCCFails Counter32, docsQos3DCCRspDeparts Counter32, docsQos3DCCRspArrives Counter32, docsQos3DbcReqs Counter32, docsQos3DbcRsps Counter32, docsQos3DbcAcks Counter32, docsQos3DbcSuccesses Counter32, docsQos3DbcFails Counter32, docsQos3DbcPartial Counter32 } docsQos3IfDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the interface direction for the instance the statistics are collected." ::= { docsQos3DynamicServiceStatsEntry 1 } docsQos3DSAReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of Dynamic Service Addition Requests, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Addition section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 2 } docsQos3DSARsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Addition Responses, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Addition section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 3 } docsQos3DSAAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Addition Acknowledgements, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Addition section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 4 } docsQos3DSCReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Change Requests, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Change section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 5 } docsQos3DSCRsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Change Responses, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Change section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 6 } docsQos3DSCAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Change Acknowledgements, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Change section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 7 } docsQos3DSDReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Delete Requests, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Delete section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 8 } docsQos3DSDRsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Service Delete Responses, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Delete section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 9 } docsQos3DynamicAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful Dynamic Service Addition transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Addition section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 10 } docsQos3DynamicAddFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed Dynamic Service Addition transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Addition section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 11 } docsQos3DynamicChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful Dynamic Service Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Change section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 12 } docsQos3DynamicChangeFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed Dynamic Service Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Change section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 13 } docsQos3DynamicDeletes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful Dynamic Service Delete transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Delete section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 14 } docsQos3DynamicDeleteFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed Dynamic Service Delete transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service Delete section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 15 } docsQos3DCCReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Channel Change Request messages traversing an interface. This count is nonzero only on downstream direction rows. This count should include the number of retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 16 } docsQos3DCCRsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Channel Change Response messages traversing an interface. This count is nonzero only on upstream direction rows. This count should include the number of retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 17 } docsQos3DCCAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dynamic Channel Change Acknowledgement messages traversing an interface. This count is nonzero only on downstream direction rows. This count should include the number of retries. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 18 } docsQos3DCCs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful Dynamic Channel Change transactions. This count is nonzero only on downstream direction rows. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 19 } docsQos3DCCFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed Dynamic Channel Change transactions. This count is nonzero only on downstream direction rows. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 20 } docsQos3DCCRspDeparts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of Dynamic Channel Change Response (depart) messages. It only applies to upstream direction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 21 } docsQos3DCCRspArrives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of Dynamic Channel Change Response (arrive) messages and should include retries. It only applies to the upstream direction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream and/or Upstream Channel Changes section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 22 } docsQos3DbcReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of Dynamic Bonding Change Requests, including retries. It only applies to the upstream direction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding Change (DBC) section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 23 } docsQos3DbcRsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of Dynamic Bonding Change Responses, including retries. It only applies to the upstream direction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding Change (DBC) section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 24 } docsQos3DbcAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of Dynamic Bonding Change Acknowledgements, including retries. It only applies to the downstream direction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding Change (DBC) section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 25 } docsQos3DbcSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of fully successful Dynamic Bonding Change transactions. It only applies to the downstream direction and does not include DBC transactions that result in Partial Service. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding Change (DBC) section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 26 } docsQos3DbcFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of failed Dynamic Bonding Change transactions. It only applies to the downstream direction. Note that Partial Service is not considered a failed transaction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding Change (DBC) section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 27 } docsQos3DbcPartial OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of unsuccessful Dynamic Bonding Change transactions that result in Partial Service. IT only applies to the downstream direction. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding Change (DBC) section; [RFC 2863]." ::= { docsQos3DynamicServiceStatsEntry 28 } docsQos3ServiceFlowLogTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ServiceFlowLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains a log of the disconnected Service Flows in a managed device." ::= { docsQos3MibObjects 7} docsQos3ServiceFlowLogEntry OBJECT-TYPE SYNTAX DocsQos3ServiceFlowLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ServiceFlowLogTable." INDEX { docsQos3ServiceFlowLogIndex } ::= { docsQos3ServiceFlowLogTable 1 } DocsQos3ServiceFlowLogEntry ::= SEQUENCE { docsQos3ServiceFlowLogIndex Unsigned32, docsQos3ServiceFlowLogIfIndex InterfaceIndex, docsQos3ServiceFlowLogSFID Unsigned32, docsQos3ServiceFlowLogCmMac MacAddress, docsQos3ServiceFlowLogPkts Counter64, docsQos3ServiceFlowLogOctets Counter64, docsQos3ServiceFlowLogTimeDeleted TimeStamp, docsQos3ServiceFlowLogTimeCreated TimeStamp, docsQos3ServiceFlowLogTimeActive Counter32, docsQos3ServiceFlowLogDirection IfDirection, docsQos3ServiceFlowLogPrimary TruthValue, docsQos3ServiceFlowLogServiceClassName SnmpAdminString, docsQos3ServiceFlowLogPolicedDropPkts Counter32, docsQos3ServiceFlowLogPolicedDelayPkts Counter32, docsQos3ServiceFlowLogControl INTEGER } docsQos3ServiceFlowLogIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key indicates an unique index for a logged service flow." ::= { docsQos3ServiceFlowLogEntry 1 } docsQos3ServiceFlowLogIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC Domain Interface index where the service flow was present." ::= { docsQos3ServiceFlowLogEntry 2 } docsQos3ServiceFlowLogSFID OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the identifier assigned to the service flow." ::= { docsQos3ServiceFlowLogEntry 3 } docsQos3ServiceFlowLogCmMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC address of the cable modem associated with the service flow." ::= { docsQos3ServiceFlowLogEntry 4 } docsQos3ServiceFlowLogPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the final value of the Pkts attribute in the ServiceFlowStats object for the service flow." ::= { docsQos3ServiceFlowLogEntry 5 } docsQos3ServiceFlowLogOctets OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the final value of the Pkts attribute in the ServiceFlowStats object for the service flow." ::= { docsQos3ServiceFlowLogEntry 6 } docsQos3ServiceFlowLogTimeDeleted OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the value of sysUpTime when the service flow was deleted." ::= { docsQos3ServiceFlowLogEntry 7 } docsQos3ServiceFlowLogTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the value of sysUpTime when the service flow was created." ::= { docsQos3ServiceFlowLogEntry 8 } docsQos3ServiceFlowLogTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the total time that the service flow was active." ::= { docsQos3ServiceFlowLogEntry 9 } docsQos3ServiceFlowLogDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the value of Service Flow direction for the service flow." ::= { docsQos3ServiceFlowLogEntry 11 } docsQos3ServiceFlowLogPrimary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If set to 'true', this attribute indicates that the Service Flow in the log was a Primary Service Flow, otherwise, a Secondary Service Flow." ::= { docsQos3ServiceFlowLogEntry 12 } docsQos3ServiceFlowLogServiceClassName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the value of ServiceClassName for the provisioned QOS Parameter Set of the service flow." ::= { docsQos3ServiceFlowLogEntry 13 } docsQos3ServiceFlowLogPolicedDropPkts OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the final value of PolicedDropPkts attribute of the ServiceFlowStats object for the service flow." ::= { docsQos3ServiceFlowLogEntry 14 } docsQos3ServiceFlowLogPolicedDelayPkts OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the final value of PolicedDelayPkts attribute of the ServiceFlowStats object for the service flow." ::= { docsQos3ServiceFlowLogEntry 15 } docsQos3ServiceFlowLogControl OBJECT-TYPE SYNTAX INTEGER { active(1), destroy(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute when set to 'destroy' removes this instance from the object. Reading this attribute returns the value 'active'." ::= { docsQos3ServiceFlowLogEntry 16 } docsQos3ServiceClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ServiceClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes a provisioned service class on a CMTS. Each object instance defines a template for certain DOCSIS QOS Parameter Set values. When a CM creates or modifies an Admitted QOS Parameter Set for a Service Flow, it may reference a Service Class Name instead of providing explicit QOS Parameter Set values. In this case, the CMTS populates the QOS Parameter Set with the applicable corresponding values from the named Service Class. Subsequent changes to a Service Class row do not affect the QOS Parameter Set values of any service flows already admitted. A service class template applies to only a single direction, as indicated in the ServiceClassDirection attribute." ::= { docsQos3MibObjects 8} docsQos3ServiceClassEntry OBJECT-TYPE SYNTAX DocsQos3ServiceClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ServiceClassTable." INDEX { docsQos3ServiceClassName } ::= { docsQos3ServiceClassTable 1 } DocsQos3ServiceClassEntry ::= SEQUENCE { docsQos3ServiceClassName SnmpAdminString, docsQos3ServiceClassStatus RowStatus, docsQos3ServiceClassPriority Unsigned32, docsQos3ServiceClassMaxTrafficRate BitRate, docsQos3ServiceClassMaxTrafficBurst Unsigned32, docsQos3ServiceClassMinReservedRate BitRate, docsQos3ServiceClassMinReservedPkt Unsigned32, docsQos3ServiceClassMaxConcatBurst Unsigned32, docsQos3ServiceClassNomPollInterval Unsigned32, docsQos3ServiceClassTolPollJitter Unsigned32, docsQos3ServiceClassUnsolicitGrantSize Unsigned32, docsQos3ServiceClassNomGrantInterval Unsigned32, docsQos3ServiceClassTolGrantJitter Unsigned32, docsQos3ServiceClassGrantsPerInterval Unsigned32, docsQos3ServiceClassMaxLatency Unsigned32, docsQos3ServiceClassActiveTimeout Unsigned32, docsQos3ServiceClassAdmittedTimeout Unsigned32, docsQos3ServiceClassSchedulingType SchedulingType, docsQos3ServiceClassRequestPolicy OCTET STRING, docsQos3ServiceClassTosAndMask OCTET STRING, docsQos3ServiceClassTosOrMask OCTET STRING, docsQos3ServiceClassDirection IfDirection, docsQos3ServiceClassStorageType StorageType, docsQos3ServiceClassDSCPOverwrite DscpOrAny, docsQos3ServiceClassRequiredAttrMask AttributeMask, docsQos3ServiceClassForbiddenAttrMask AttributeMask, docsQos3ServiceClassAttrAggrRuleMask AttrAggrRuleMask, docsQos3ServiceClassAppId Unsigned32, docsQos3ServiceClassMultiplierContentionReqWindow Unsigned32, docsQos3ServiceClassMultiplierBytesReq Unsigned32, docsQos3ServiceClassMaxReqPerSidCluster Unsigned32, docsQos3ServiceClassMaxOutstandingBytesPerSidCluster Unsigned32, docsQos3ServiceClassMaxTotBytesReqPerSidCluster Unsigned32, docsQos3ServiceClassMaxTimeInSidCluster Unsigned32, docsQos3ServiceClassPeakTrafficRate Unsigned32, docsQos3ServiceClassDsResequencing INTEGER } docsQos3ServiceClassName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key indicates the Service Class Name associated with this object instance. DOCSIS specifies that the maximum size is 16 ASCII characters including a terminating zero. The terminating zero is not represented in this SnmpAdminString syntax attribute." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Class Name section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ServiceClassEntry 1 } docsQos3ServiceClassStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= { docsQos3ServiceClassEntry 3 } docsQos3ServiceClassPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the Priority attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 4 } docsQos3ServiceClassMaxTrafficRate OBJECT-TYPE SYNTAX BitRate UNITS "bps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxTrafficRate attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 5 } docsQos3ServiceClassMaxTrafficBurst OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxTrafficBurst attribute of the QoS Parameter Set." DEFVAL { 3044 } ::= { docsQos3ServiceClassEntry 6 } docsQos3ServiceClassMinReservedRate OBJECT-TYPE SYNTAX BitRate UNITS "bps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MinReservedRate attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 7 } docsQos3ServiceClassMinReservedPkt OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MinReservedPkt attribute of the QoS Parameter Set." ::= { docsQos3ServiceClassEntry 8 } docsQos3ServiceClassMaxConcatBurst OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxConcatBurst attribute of the QoS Parameter Set." DEFVAL { 1522 } ::= { docsQos3ServiceClassEntry 9 } docsQos3ServiceClassNomPollInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the NomPollInterval attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 10 } docsQos3ServiceClassTolPollJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the TolPolJitter attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 11 } docsQos3ServiceClassUnsolicitGrantSize OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the UnsolicitGrantSize attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 12 } docsQos3ServiceClassNomGrantInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the NomGrantInterval attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 13 } docsQos3ServiceClassTolGrantJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the TolGrantJitter attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 14 } docsQos3ServiceClassGrantsPerInterval OBJECT-TYPE SYNTAX Unsigned32 (0..127) UNITS "dataGrants" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the GrantsPerInterval attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 15 } docsQos3ServiceClassMaxLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxLatency attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 16 } docsQos3ServiceClassActiveTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the ActiveTimeout attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 17 } docsQos3ServiceClassAdmittedTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the AddmitedTimeout attribute of the QoS Parameter Set." DEFVAL { 200 } ::= { docsQos3ServiceClassEntry 18 } docsQos3ServiceClassSchedulingType OBJECT-TYPE SYNTAX SchedulingType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the SchedulingType attribute of the QoS Parameter Set." DEFVAL { bestEffort } ::= { docsQos3ServiceClassEntry 19 } docsQos3ServiceClassRequestPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the ReqPolicyOct attribute of the QoS Parameter Set." DEFVAL { '00000000'H } ::= { docsQos3ServiceClassEntry 20 } docsQos3ServiceClassTosAndMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the TosAndMask attribute of the QoS Parameter Set." ::= { docsQos3ServiceClassEntry 21 } docsQos3ServiceClassTosOrMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the TosOrMask attribute of the QoS Parameter Set." ::= { docsQos3ServiceClassEntry 22 } docsQos3ServiceClassDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the Direction attribute of the QoS Parameter Set." DEFVAL { upstream } ::= { docsQos3ServiceClassEntry 23 } docsQos3ServiceClassStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines whether this row is kept in volatile storage and lost upon reboot or whether it is backed up by non-volatile or permanent storage. 'permanent' entries need not allow writable access to any instance attribute." DEFVAL { nonVolatile } ::= { docsQos3ServiceClassEntry 24 } docsQos3ServiceClassDSCPOverwrite OBJECT-TYPE SYNTAX DscpOrAny MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute allows the overwrite of the DSCP field per RFC 3260. If this attribute is -1, then the corresponding TosAndMask value is set to be 'FF'H and TosOrMask is set to '00'H. Otherwise, this attribute is in the range of 0..63, and the corresponding TosAndMask value is '03'H and TosOrMaskvalue is this attribute value shifted left by two bit positions." DEFVAL { -1 } ::= { docsQos3ServiceClassEntry 25 } docsQos3ServiceClassRequiredAttrMask OBJECT-TYPE SYNTAX AttributeMask MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the RequiredAttrMask attribute of the QoS Parameter Set." DEFVAL { { } } ::= { docsQos3ServiceClassEntry 26 } docsQos3ServiceClassForbiddenAttrMask OBJECT-TYPE SYNTAX AttributeMask MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the ForbiddenAttrMask attribute of the QoS Parameter Set." DEFVAL { { } } ::= { docsQos3ServiceClassEntry 27 } docsQos3ServiceClassAttrAggrRuleMask OBJECT-TYPE SYNTAX AttrAggrRuleMask MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the AttrAggregationMask attribute of the QoS Parameter Set." DEFVAL { resequencingDsid } ::= { docsQos3ServiceClassEntry 28 } docsQos3ServiceClassAppId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the AppId attribute of the QoS Parameter Set." ::= { docsQos3ServiceClassEntry 29 } docsQos3ServiceClassMultiplierContentionReqWindow OBJECT-TYPE SYNTAX Unsigned32 (4..12) UNITS "eighths" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MultiplierContentionReqWindow attribute of the QoS Parameter Set." DEFVAL { 8 } ::= { docsQos3ServiceClassEntry 30 } docsQos3ServiceClassMultiplierBytesReq OBJECT-TYPE SYNTAX Unsigned32 (1 | 2 | 4 | 8 | 16) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MultiplierBytesReq attribute of the QoS Parameter Set." DEFVAL { 4 } ::= { docsQos3ServiceClassEntry 31 } docsQos3ServiceClassMaxReqPerSidCluster OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "requests" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxReqPerSidCluster attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 32 } docsQos3ServiceClassMaxOutstandingBytesPerSidCluster OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxOutstandingBytesPerSidCluster attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 33 } docsQos3ServiceClassMaxTotBytesReqPerSidCluster OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxTotBytesReqPerSidCluster attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 34 } docsQos3ServiceClassMaxTimeInSidCluster OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the MaxTimeInSidCluster attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 35 } docsQos3ServiceClassPeakTrafficRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the PeakTrafficRate attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 36 } docsQos3ServiceClassDsResequencing OBJECT-TYPE SYNTAX INTEGER { resequencingDsid(0), noResequencingDsid(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the template for the DsResequencing attribute of the QoS Parameter Set." DEFVAL { 0 } ::= { docsQos3ServiceClassEntry 37 } docsQos3PHSTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3PHSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of payload header suppression of Service Flows." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 10} docsQos3PHSEntry OBJECT-TYPE SYNTAX DocsQos3PHSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3PHSTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of the classifier that includes this PHS rule." INDEX { ifIndex,docsQos3ServiceFlowId,docsQos3PktClassId } ::= { docsQos3PHSTable 1 } DocsQos3PHSEntry ::= SEQUENCE { docsQos3PHSField OCTET STRING, docsQos3PHSMask OCTET STRING, docsQos3PHSSize Unsigned32, docsQos3PHSVerify TruthValue, docsQos3PHSIndex Unsigned32 } docsQos3PHSField OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the Payload Header suppression field defines the bytes of the header that must be suppressed/restored by the sending/receiving device. The number of octets in this attribute should be the same as the value of PHSSize." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression Field (PHSF) section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PHSEntry 2 } docsQos3PHSMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the bit mask that is used in combination with the PHSField. It defines which bytes in the header must be suppressed/restored by the sending or receiving device. Each bit of this bit mask corresponds to a byte in the PHSField, with the least significant bit corresponding to the first byte of the PHSField. Each bit of the bit mask specifies whether the corresponding byte should be suppressed in the packet. A bit value of '1' indicates that the byte should be suppressed by the sending device and restored by the receiving device. A bit value of '0' indicates that the byte should not be suppressed by the sending device or restored by the receiving device. If the bit mask does not contain a bit for each byte in the PHSField, then the bit mask is extended with bit values of '1' to be the necessary length." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression Mask (PHSM) section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PHSEntry 3 } docsQos3PHSSize OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the number of bytes in the header to be suppressed and restored. The value of this attribute matches the numberof bytes in the Field attribute." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression Size (PHSS) section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PHSEntry 4 } docsQos3PHSVerify OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If 'true', this attribute indicates that the sender must verify that the PHS Field is the same as the content in the packet to be suppressed." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression Verification (PHSV) section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PHSEntry 5 } docsQos3PHSIndex OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute uniquely references the PHS rule for a given service flow." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression Index (PHSI) section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PHSEntry 7 } docsQos3CmtsMacToSrvFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmtsMacToSrvFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the mapping of unicast service flows with the cable modem the service flows belongs to." ::= { docsQos3MibObjects 11} docsQos3CmtsMacToSrvFlowEntry OBJECT-TYPE SYNTAX DocsQos3CmtsMacToSrvFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmtsMacToSrvFlowTable." INDEX { docsQos3CmtsCmMac,docsQos3CmtsServiceFlowId } ::= { docsQos3CmtsMacToSrvFlowTable 1 } DocsQos3CmtsMacToSrvFlowEntry ::= SEQUENCE { docsQos3CmtsCmMac MacAddress, docsQos3CmtsServiceFlowId Unsigned32, docsQos3CmtsIfIndex InterfaceIndex } docsQos3CmtsCmMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the MAC address for the referenced CM." ::= { docsQos3CmtsMacToSrvFlowEntry 1 } docsQos3CmtsServiceFlowId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the identifier of the Service Flow." ::= { docsQos3CmtsMacToSrvFlowEntry 2 } docsQos3CmtsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the interface index of the MAC domain of the Service Flow and where the CableModem is registered." ::= { docsQos3CmtsMacToSrvFlowEntry 3 } docsQos3ServiceFlowSidClusterTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ServiceFlowSidClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines the SID clusters associated with an upstream service flow." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow SID Cluster Assignments section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 12} docsQos3ServiceFlowSidClusterEntry OBJECT-TYPE SYNTAX DocsQos3ServiceFlowSidClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ServiceFlowSidClusterTable. The ifIndex key corresponds to the MAC Domain interface of the service flow." INDEX { ifIndex,docsQos3ServiceFlowId,docsQos3ServiceFlowSidClusterId,docsQos3ServiceFlowSidClusterUcid } ::= { docsQos3ServiceFlowSidClusterTable 1 } DocsQos3ServiceFlowSidClusterEntry ::= SEQUENCE { docsQos3ServiceFlowSidClusterId Unsigned32, docsQos3ServiceFlowSidClusterUcid ChId, docsQos3ServiceFlowSidClusterSid Unsigned32 } docsQos3ServiceFlowSidClusterId OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the SID Cluster ID of the SID Cluster." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, SID Cluster ID section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3ServiceFlowSidClusterEntry 1 } docsQos3ServiceFlowSidClusterUcid OBJECT-TYPE SYNTAX ChId (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the upstream Channel ID mapped to the corresponding SID." ::= { docsQos3ServiceFlowSidClusterEntry 2 } docsQos3ServiceFlowSidClusterSid OBJECT-TYPE SYNTAX Unsigned32 (1..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the SID assigned to the upstream channel in this SID Cluster." ::= { docsQos3ServiceFlowSidClusterEntry 3 } docsQos3GrpServiceFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3GrpServiceFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides extensions to the service flow information for Group Service Flows (GSFs)." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, QoS Support for Joined IP Multicast Traffic section." ::= { docsQos3MibObjects 13} docsQos3GrpServiceFlowEntry OBJECT-TYPE SYNTAX DocsQos3GrpServiceFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3GrpServiceFlowTable. The ifIndex key corresponds to the MAC Domain interface of the group service flow." INDEX { ifIndex,docsQos3ServiceFlowId } ::= { docsQos3GrpServiceFlowTable 1 } DocsQos3GrpServiceFlowEntry ::= SEQUENCE { docsQos3GrpServiceFlowIsDef TruthValue, docsQos3GrpServiceFlowQosConfigId Unsigned32, docsQos3GrpServiceFlowNumSess Unsigned32 } docsQos3GrpServiceFlowIsDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the GSF QOS Parameter Set corresponds to the Default Group Service Flow." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex." ::= { docsQos3GrpServiceFlowEntry 1 } docsQos3GrpServiceFlowQosConfigId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the Group QoS Configuration (GQC) identifier used of the creation of this GSF. The value zero indicates that the Service Flow is using the default service flow." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex." ::= { docsQos3GrpServiceFlowEntry 2 } docsQos3GrpServiceFlowNumSess OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of sessions that are configured in an aggregated Service Flow. If this is a single session replication, the value of this attribute is 1." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex." ::= { docsQos3GrpServiceFlowEntry 3 } docsQos3GrpPktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3GrpPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides additional packet classification information for Group Classifier References (GCRs) in a Group Service Flow (GSF)." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, QoS Support for Joined IP Multicast Traffic section." ::= { docsQos3MibObjects 14} docsQos3GrpPktClassEntry OBJECT-TYPE SYNTAX DocsQos3GrpPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3GrpPktClassTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of this group classifier." INDEX { ifIndex,docsQos3ServiceFlowId,docsQos3PktClassId } ::= { docsQos3GrpPktClassTable 1 } DocsQos3GrpPktClassEntry ::= SEQUENCE { docsQos3GrpPktClassGrpConfigId Unsigned32 } docsQos3GrpPktClassGrpConfigId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the GC identifier used of the creation of this GSF." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex." ::= { docsQos3GrpPktClassEntry 1 } docsQos3UpChCounterExtTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3UpChCounterExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides extensions for service flow statistics for fragmentation for channel bonding." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Channel Bonding section." ::= { docsQos3MibObjects 15} docsQos3UpChCounterExtEntry OBJECT-TYPE SYNTAX DocsQos3UpChCounterExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3UpChCounterExtTable. The ifIndex key corresponds to the upstream Channel Interface of the service flow." INDEX { ifIndex } ::= { docsQos3UpChCounterExtTable 1 } DocsQos3UpChCounterExtEntry ::= SEQUENCE { docsQos3UpChCounterExtSgmtValids Counter32, docsQos3UpChCounterExtSgmtDiscards Counter32 } docsQos3UpChCounterExtSgmtValids OBJECT-TYPE SYNTAX Counter32 UNITS "segments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the total number segments processed on this channel. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream and Downstream Common Aspects section; [RFC 2863]." ::= { docsQos3UpChCounterExtEntry 1 } docsQos3UpChCounterExtSgmtDiscards OBJECT-TYPE SYNTAX Counter32 UNITS "segments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the total number of discarded segments on this channel due to segment HCS problems. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Continuous Concatenation and Fragmentation section;[RFC 2863]." ::= { docsQos3UpChCounterExtEntry 2 } docsQos3ServiceFlowCcfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ServiceFlowCcfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides upstream service flow statistics for Continous Concatenation and Fragmentation (CCF). The CMTS MAY not instantate this object for service flows that do not use CCF or return the zero value on individual counter's statistics." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Continuous Concatenation and Fragmentation section." ::= { docsQos3MibObjects 16} docsQos3ServiceFlowCcfStatsEntry OBJECT-TYPE SYNTAX DocsQos3ServiceFlowCcfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3ServiceFlowCcfStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow." INDEX { ifIndex,docsQos3ServiceFlowId } ::= { docsQos3ServiceFlowCcfStatsTable 1 } DocsQos3ServiceFlowCcfStatsEntry ::= SEQUENCE { docsQos3ServiceFlowCcfStatsSgmtValids Counter32, docsQos3ServiceFlowCcfStatsSgmtLost Counter32 } docsQos3ServiceFlowCcfStatsSgmtValids OBJECT-TYPE SYNTAX Counter32 UNITS "segments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of segments counted on this service flow regardless of whether the fragment was correctly reassembled into valid packets. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Continuous Concatenation and Fragmentation section; [RFC 2863]." ::= { docsQos3ServiceFlowCcfStatsEntry 1 } docsQos3ServiceFlowCcfStatsSgmtLost OBJECT-TYPE SYNTAX Counter32 UNITS "segments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of segments which the CMTS segment reassembly function determines were lost. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Continuous Concatenation and Fragmentation section; [RFC 2863]." ::= { docsQos3ServiceFlowCcfStatsEntry 2 } docsQos3CmServiceUsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmServiceUsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines DOCSIS MAC services primitive statistics of upstream service flows. In pre-3.0 DOCSIS devices this statistics exists per SID for either Cos or Qos services in the SNMP table docsIfCmServiceTable. A 3.0 CM with CoS configuration (DOCSIS 1.0 mode) reports the statistics defined in the SNMP table docsIfCmServiceTable. A 3.0 CM with QoS configuration reports this object regardless of whether Multiple Transmit Channel is enabled or disabled." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Data Transmission section." ::= { docsQos3MibObjects 17} docsQos3CmServiceUsStatsEntry OBJECT-TYPE SYNTAX DocsQos3CmServiceUsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmServiceUsStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow." INDEX { ifIndex,docsQos3ServiceFlowId } ::= { docsQos3CmServiceUsStatsTable 1 } DocsQos3CmServiceUsStatsEntry ::= SEQUENCE { docsQos3CmServiceUsStatsTxSlotsImmed Counter32, docsQos3CmServiceUsStatsTxSlotsDed Counter32, docsQos3CmServiceUsStatsTxRetries Counter32, docsQos3CmServiceUsStatsTxExceededs Counter32, docsQos3CmServiceUsStatsRqRetries Counter32, docsQos3CmServiceUsStatsRqExceededs Counter32, docsQos3CmServiceUsStatsSgmts Counter32 } docsQos3CmServiceUsStatsTxSlotsImmed OBJECT-TYPE SYNTAX Counter32 UNITS "mini-slots" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of upstream mini-slots which have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to have arrived at the head-end (i.e., those which were explicitly acknowledged.) It does not include retransmission attempts or mini-slots used by Requests. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth Allocation section; [RFC 2863]." ::= { docsQos3CmServiceUsStatsEntry 1 } docsQos3CmServiceUsStatsTxSlotsDed OBJECT-TYPE SYNTAX Counter32 UNITS "mini-slots" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of upstream mini-slots which have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Data Transmission section; [RFC 2863]." ::= { docsQos3CmServiceUsStatsEntry 2 } docsQos3CmServiceUsStatsTxRetries OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of attempts to transmit data PDUs containing requests for acknowledgment that did not result in acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth Allocation section; [RFC 2863]." ::= { docsQos3CmServiceUsStatsEntry 3 } docsQos3CmServiceUsStatsTxExceededs OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of attempts to transmit bandwidth requests which did not result in acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth Allocation section; [RFC 2863]." ::= { docsQos3CmServiceUsStatsEntry 4 } docsQos3CmServiceUsStatsRqRetries OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of attempts to transmit bandwidth requests which did not result in acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth Allocation section; [RFC 2863]." ::= { docsQos3CmServiceUsStatsEntry 5 } docsQos3CmServiceUsStatsRqExceededs OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of requests for bandwidth which failed due to excessive retries without acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth Allocation section; [RFC 2863]." ::= { docsQos3CmServiceUsStatsEntry 6 } docsQos3CmServiceUsStatsSgmts OBJECT-TYPE SYNTAX Counter32 UNITS "segments" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the number of segments sent on this service flow. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime of the associated MAC Domain interface index." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Upstream and Downstream Common Aspects section; RFC 2863." ::= { docsQos3CmServiceUsStatsEntry 7 } docsQos3CmtsDsidTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmtsDsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes DSID information stored in the CMTS. The CMTS reports the current status of existing DSIDs. When a DSID is created during the registration process or a DBC transaction, a corresponding object instance is created. If a DSID is deleted or changed via a DBC message the corresponding object instance is deleted or updated respectively." ::= { docsQos3MibObjects 18} docsQos3CmtsDsidEntry OBJECT-TYPE SYNTAX DocsQos3CmtsDsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmtsDsidTable. The ifIndex key corresponds to the MAC Domain interface of the DSID." INDEX { ifIndex,docsQos3CmtsDsidDsid } ::= { docsQos3CmtsDsidTable 1 } DocsQos3CmtsDsidEntry ::= SEQUENCE { docsQos3CmtsDsidDsid Dsid, docsQos3CmtsDsidUsage BITS, docsQos3CmtsDsidDsChSet ChSetId, docsQos3CmtsDsidReseqWaitTime Unsigned32, docsQos3CmtsDsidReseqWarnThrshld Unsigned32, docsQos3CmtsDsidStatusHldoffTimerSeqOutOfRng Unsigned32, docsQos3CmtsDsidCurrentSeqNum Unsigned32 } docsQos3CmtsDsidDsid OBJECT-TYPE SYNTAX Dsid MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the DSID." ::= { docsQos3CmtsDsidEntry 1 } docsQos3CmtsDsidUsage OBJECT-TYPE SYNTAX BITS { resequencing(0), multicastCapable(1), multicastReplication(2), bonding(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the properties of the DSID. The bits are defined as follows: 'resequencing' This bit is set to 1 for a Resequencing DSID. 'multicastCapable' This bit is set to 1 for a DSID that is capable of transporting multicast traffic (i.e., the DSID has multicast forwarding attributes). 'multicastReplication' This bit is set to 1 for a DSID that is used for transporting a multicast replication (i.e. there is a corresponding instance of the MulticastRepl object). 'bonding' This bit is set to a 1 for a DSID that is associated with a bonding group." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex. DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, DSID Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3CmtsDsidEntry 2 } docsQos3CmtsDsidDsChSet OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Downstream Channel Set over which the DSID is being resequenced." ::= { docsQos3CmtsDsidEntry 3 } docsQos3CmtsDsidReseqWaitTime OBJECT-TYPE SYNTAX Unsigned32 (1..180) UNITS "hundredMicroseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the DSID Resequencing Wait Time that is used for this DSID. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmtsDsidEntry 4 } docsQos3CmtsDsidReseqWarnThrshld OBJECT-TYPE SYNTAX Unsigned32 (0..179) UNITS "hundredMicroseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the DSID Resequencing Warning Threshold that is used for this DSID. The value of 0 indicates that the threshold warnings are disabled. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmtsDsidEntry 5 } docsQos3CmtsDsidStatusHldoffTimerSeqOutOfRng OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "20milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the hold-off timer for reporting Out-of-Range Events via the CM-STATUS MAC Management message. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmtsDsidEntry 6 } docsQos3CmtsDsidCurrentSeqNum OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the value of the most recent sequence number assigned by the CMTS for this DSID. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmtsDsidEntry 7 } docsQos3CmtsDebugDsidTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmtsDebugDsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CMTS Debug DSID object contains the control of DSID debug statistics reporting An instance in this object defines the DSID and MAC domain to which the CmtsDebugDsidStats collects statistics for the downstream channel associated with that DSID and MAC Domain. The deletion of an instance stops the reporting of statistics for the specified DSID. This object supports instance creation and deletion. The CMTS MUST support at least one instance of this object." ::= { docsQos3MibObjects 19} docsQos3CmtsDebugDsidEntry OBJECT-TYPE SYNTAX DocsQos3CmtsDebugDsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmtsDebugDsidTable. The ifIndex key corresponds to the MAC Domain interface of the DSID." INDEX { ifIndex,docsQos3CmtsDebugDsidDsid } ::= { docsQos3CmtsDebugDsidTable 1 } DocsQos3CmtsDebugDsidEntry ::= SEQUENCE { docsQos3CmtsDebugDsidDsid Dsid, docsQos3CmtsDebugDsidRowStatus RowStatus } docsQos3CmtsDebugDsidDsid OBJECT-TYPE SYNTAX Dsid MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute represents the DSID value to be debugged, identified by the IfIndex attribute of this object." ::= { docsQos3CmtsDebugDsidEntry 1 } docsQos3CmtsDebugDsidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= { docsQos3CmtsDebugDsidEntry 2 } docsQos3CmtsDebugDsidStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmtsDebugDsidStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CMTS Debug DSID Stats object describes statistics at the CMTS for the forwarding of DSID-labeled downstream packets. The CMTS creates an instance for every combination of MAC Domain, DSID value, and downstream channel on which packets labeled with that DSID are transmitted. The CMTS does not delete such instances while the corresponding CmtsDebug object control instance exists." ::= { docsQos3MibObjects 20} docsQos3CmtsDebugDsidStatsEntry OBJECT-TYPE SYNTAX DocsQos3CmtsDebugDsidStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmtsDebugDsidStatsTable. The ifIndex key corresponds to the MAC Domain interface of the DSID." INDEX { ifIndex,docsQos3CmtsDebugDsidDsid,docsQos3CmtsDebugDsidStatsDsIfIndex } ::= { docsQos3CmtsDebugDsidStatsTable 1 } DocsQos3CmtsDebugDsidStatsEntry ::= SEQUENCE { docsQos3CmtsDebugDsidStatsDsIfIndex InterfaceIndex, docsQos3CmtsDebugDsidStatsDsidPackets Counter64, docsQos3CmtsDebugDsidStatsDsidOctets Counter64 } docsQos3CmtsDebugDsidStatsDsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an interface index of a downstream channel that belongs to the DSID" ::= { docsQos3CmtsDebugDsidStatsEntry 1 } docsQos3CmtsDebugDsidStatsDsidPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is a counter which contains the number of packets transmitted by the CMTS which are labeled with the DSID on the downstream channel. Discontinuities in the value of this counter can occur as indicated by the value of ifCounterDiscontinuityTime of the associated Downstream interface index." ::= { docsQos3CmtsDebugDsidStatsEntry 2 } docsQos3CmtsDebugDsidStatsDsidOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of bytes transmitted by the CMTS which are labeled with the DSID on the downstream interface. Discontinuities in the value of this counter can occur as indicated by the value of ifCounterDiscontinuityTime of the associated Downstream interface index." ::= { docsQos3CmtsDebugDsidStatsEntry 3 } docsQos3CmDsidTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmDsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "When a DSID is created, during the registration process or a DBC transaction,. The CM reports the current status of existing DSID, for example, if a DSID is deleted or changed via DBC messages the corresponding object instance is deleted or updated respectively." ::= { docsQos3MibObjects 21} docsQos3CmDsidEntry OBJECT-TYPE SYNTAX DocsQos3CmDsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmDsidTable The ifIndex key corresponds to the MAC Domain interface of the DSID." INDEX { ifIndex,docsQos3CmDsidDsid } ::= { docsQos3CmDsidTable 1 } DocsQos3CmDsidEntry ::= SEQUENCE { docsQos3CmDsidDsid Dsid, docsQos3CmDsidUsage BITS, docsQos3CmDsidNumReseqChs Unsigned32, docsQos3CmDsidReseqChList ChannelList, docsQos3CmDsidReseqWaitTime Unsigned32, docsQos3CmDsidReseqWarnThrshld Unsigned32, docsQos3CmDsidStatusHldoffTimerSeqOutOfRng Unsigned32, docsQos3CmDsidOutOfRangeDiscards Unsigned32, docsQos3CmDsidNextExpectedSeqNum Unsigned32, docsQos3CmDsidCmInterfaceMask DocsL2vpnIfList, docsQos3CmDsidFwdCmInterfaceMask DocsL2vpnIfList } docsQos3CmDsidDsid OBJECT-TYPE SYNTAX Dsid MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the DSID." ::= { docsQos3CmDsidEntry 1 } docsQos3CmDsidUsage OBJECT-TYPE SYNTAX BITS { resequencing(0), multicastCapable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the properties of the DSID. The bits are defined as follows: 'resequencing' : This bit is set to 1 for a Resequencing DSID. 'multicastCapable' : This bit is set to 1 for a DSID that is capable of transporting multicast traffic (e.g., the DSID has multicast forwarding attributes)." ::= { docsQos3CmDsidEntry 2 } docsQos3CmDsidNumReseqChs OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the number of channels in the downstream resequencing channel list for this DSID." ::= { docsQos3CmDsidEntry 3 } docsQos3CmDsidReseqChList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Downstream Channel Set over which the DSID is being resequenced." ::= { docsQos3CmDsidEntry 4 } docsQos3CmDsidReseqWaitTime OBJECT-TYPE SYNTAX Unsigned32 (1..180) UNITS "hundredMicroseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the DSID Resequencing Wait Time that is used for this DSID. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmDsidEntry 5 } docsQos3CmDsidReseqWarnThrshld OBJECT-TYPE SYNTAX Unsigned32 (0..179) UNITS "hundredMicroseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the DSID Resequencing Warning Threshold that is used for this DSID. The value of 0 indicates that the threshold warnings are disabled. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmDsidEntry 6 } docsQos3CmDsidStatusHldoffTimerSeqOutOfRng OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "20milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the hold-off timer for reporting Out-of-Range Events via the CM-STATUS MAC Management message. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmDsidEntry 7 } docsQos3CmDsidOutOfRangeDiscards OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the current count of out-of-range packets discarded by the CM for a given resequencing context since an in-range packet was received. When this count exceeds 1000 and more than two minutes have elapsed since an in-range packet was received, the CM will reacquire sequence numbers for this resequencing context." ::= { docsQos3CmDsidEntry 8 } docsQos3CmDsidNextExpectedSeqNum OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Next Expected Packet Sequence Number for a given resequencing context. This attribute is only valid when the Usage attribute has the resequencing bit set to 1. This attribute returns a value of 0 when the Usage attribute has the resequencing bit set to 0." ::= { docsQos3CmDsidEntry 9 } docsQos3CmDsidCmInterfaceMask OBJECT-TYPE SYNTAX DocsL2vpnIfList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the bitmap of the interfaces communicated to the CM in a Multicast DSID encoding." ::= { docsQos3CmDsidEntry 10 } docsQos3CmDsidFwdCmInterfaceMask OBJECT-TYPE SYNTAX DocsL2vpnIfList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the bitmap of the interfaces to which the CM forwards multicast traffic: a logical OR of interfaces identified in CmInterfaceMask and interfaces associated with the client MAC addresses identified in the docsDevCmDsidMac instances for this DSID." ::= { docsQos3CmDsidEntry 11 } docsQos3CmDsidStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmDsidStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines a set of statistics the CM collects per Dsid." ::= { docsQos3MibObjects 22} docsQos3CmDsidStatsEntry OBJECT-TYPE SYNTAX DocsQos3CmDsidStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmDsidStatsTable." INDEX { docsQos3CmDsidStatsDsid } ::= { docsQos3CmDsidStatsTable 1 } DocsQos3CmDsidStatsEntry ::= SEQUENCE { docsQos3CmDsidStatsDsid Dsid, docsQos3CmDsidStatsSeqNumMissing Counter32, docsQos3CmDsidStatsSkewThreshExceeds Counter32, docsQos3CmDsidStatsOutOfRangePackets Counter32, docsQos3CmDsidStatsNumPackets Counter64 } docsQos3CmDsidStatsDsid OBJECT-TYPE SYNTAX Dsid MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the interface index of the MAC Domain associated with the DSID." ::= { docsQos3CmDsidStatsEntry 1 } docsQos3CmDsidStatsSeqNumMissing OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of times the Next Expected Packet Sequence Number is declared lost. In this case one or more data packets are lost. This is generally caused by downstream packet loss." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Downstream Sequencing section." ::= { docsQos3CmDsidStatsEntry 2 } docsQos3CmDsidStatsSkewThreshExceeds OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts in-range sequenced packets which were successfully received by the CM after a wait time longer than the Resequencing Warning Threshold." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Skew Requirements section." ::= { docsQos3CmDsidStatsEntry 3 } docsQos3CmDsidStatsOutOfRangePackets OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of packets Counter received in a DSID reassembly context where the sequence number which is out of range." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Receive Channels section." ::= { docsQos3CmDsidStatsEntry 4 } docsQos3CmDsidStatsNumPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of data packets of a DSID context forwarded for further processing." ::= { docsQos3CmDsidStatsEntry 5 } docsQos3CmDsidClientTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3CmDsidClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the client MAC addresses that the CMTS requests that the CM uses to replicate Multicast DSIDs during registration or during a DBC transaction. When a DSID is created that includes client MAC addresses, or when client MAC addresses are added to a DSID, new rows are created to indicate the added client MAC addresses. When a Client MAC address is deleted from a DSID, the corresponding row is deleted. When a DSID is deleted, all corresponding rows are deleted, too." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, DSID Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 23} docsQos3CmDsidClientEntry OBJECT-TYPE SYNTAX DocsQos3CmDsidClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsQos3CmDsidClientTable." INDEX { docsQos3CmDsidClientDsid,docsQos3CmDsidClientClientMacId } ::= { docsQos3CmDsidClientTable 1 } DocsQos3CmDsidClientEntry ::= SEQUENCE { docsQos3CmDsidClientDsid Dsid, docsQos3CmDsidClientClientMacId Unsigned32, docsQos3CmDsidClientClientMacAddr MacAddress } docsQos3CmDsidClientDsid OBJECT-TYPE SYNTAX Dsid MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key defines the DSID that the client MAC addresses are associated with." ::= { docsQos3CmDsidClientEntry 1 } docsQos3CmDsidClientClientMacId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key defines a uniquely identified Client Mac Addresses associated with the DSID." ::= { docsQos3CmDsidClientEntry 2 } docsQos3CmDsidClientClientMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines a client MAC address to which Multicast traffic labeled with this DSID should be forwarded." ::= { docsQos3CmDsidClientEntry 3 } docsQos3MibConformance OBJECT IDENTIFIER ::= { docsQos3Mib 2 } docsQos3MibCompliances OBJECT IDENTIFIER ::= { docsQos3MibConformance 1 } docsQos3MibGroups OBJECT IDENTIFIER ::= { docsQos3MibConformance 2 } docsQos3Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement of managed objects common for Cable Modem Termination Sytems (CMTS) and Cable Modems (CM)." MODULE -- this MODULE MANDATORY-GROUPS { docsQos3BaseGroup } GROUP docsQos3CmtsGroup DESCRIPTION "This group is mandatory for Cable Modem Termination Systems (CMTS) and is not implemented for Cable Modems (CM)." GROUP docsQos3CmGroup DESCRIPTION "This group is mandatory for Cable Modems (CM)TS) and is not implemented for Cable Modems Termination Systems (CMTS)." ::= { docsQos3MibCompliances 1 } docsQos3BaseGroup OBJECT-GROUP OBJECTS { docsQos3PktClassDirection, docsQos3PktClassPriority, docsQos3PktClassIpTosLow, docsQos3PktClassIpTosHigh, docsQos3PktClassIpTosMask, docsQos3PktClassIpProtocol, docsQos3PktClassIpSourceAddr, docsQos3PktClassIpSourceMask, docsQos3PktClassIpDestAddr, docsQos3PktClassIpDestMask, docsQos3PktClassSourcePortStart, docsQos3PktClassSourcePortEnd, docsQos3PktClassDestPortStart, docsQos3PktClassDestPortEnd, docsQos3PktClassDestMacAddr, docsQos3PktClassDestMacMask, docsQos3PktClassSourceMacAddr, docsQos3PktClassEnetProtocolType, docsQos3PktClassEnetProtocol, docsQos3PktClassUserPriLow, docsQos3PktClassUserPriHigh, docsQos3PktClassVlanId, docsQos3PktClassState, docsQos3PktClassPkts, docsQos3PktClassBitMap, docsQos3PktClassIpAddrType, docsQos3PktClassFlowLabel, docsQos3PktClassCmInterfaceMask, docsQos3ParamSetServiceClassName, docsQos3ParamSetPriority, docsQos3ParamSetMaxTrafficRate, docsQos3ParamSetMaxTrafficBurst, docsQos3ParamSetMinReservedRate, docsQos3ParamSetMinReservedPkt, docsQos3ParamSetActiveTimeout, docsQos3ParamSetAdmittedTimeout, docsQos3ParamSetMaxConcatBurst, docsQos3ParamSetSchedulingType, docsQos3ParamSetNomPollInterval, docsQos3ParamSetTolPollJitter, docsQos3ParamSetUnsolicitGrantSize, docsQos3ParamSetNomGrantInterval, docsQos3ParamSetTolGrantJitter, docsQos3ParamSetGrantsPerInterval, docsQos3ParamSetTosAndMask, docsQos3ParamSetTosOrMask, docsQos3ParamSetMaxLatency, docsQos3ParamSetRequestPolicyOct, docsQos3ParamSetRequiredAttrMask, docsQos3ParamSetForbiddenAttrMask, docsQos3ParamSetAttrAggrRuleMask, docsQos3ParamSetAppId, docsQos3ParamSetMultiplierContentionReqWindow, docsQos3ParamSetMultiplierBytesReq, docsQos3ParamSetMaxReqPerSidCluster, docsQos3ParamSetMaxOutstandingBytesPerSidCluster, docsQos3ParamSetMaxTotBytesReqPerSidCluster, docsQos3ParamSetMaxTimeInSidCluster, docsQos3ParamSetPeakTrafficRate, docsQos3ParamSetDsResequencing, docsQos3ParamSetBitMap, docsQos3ServiceFlowSID, docsQos3ServiceFlowDirection, docsQos3ServiceFlowPrimary, docsQos3ServiceFlowParamSetTypeStatus, docsQos3ServiceFlowChSetId, docsQos3ServiceFlowAttrAssignSuccess, docsQos3ServiceFlowDsid, docsQos3ServiceFlowPkts, docsQos3ServiceFlowOctets, docsQos3ServiceFlowTimeCreated, docsQos3ServiceFlowTimeActive, docsQos3ServiceFlowPHSUnknowns, docsQos3ServiceFlowPolicedDropPkts, docsQos3ServiceFlowPolicedDelayPkts, docsQos3DSAReqs, docsQos3DSARsps, docsQos3DSAAcks, docsQos3DSCReqs, docsQos3DSCRsps, docsQos3DSCAcks, docsQos3DSDReqs, docsQos3DSDRsps, docsQos3DynamicAdds, docsQos3DynamicAddFails, docsQos3DynamicChanges, docsQos3DynamicChangeFails, docsQos3DynamicDeletes, docsQos3DynamicDeleteFails, docsQos3DCCReqs, docsQos3DCCRsps, docsQos3DCCAcks, docsQos3DCCs, docsQos3DCCFails, docsQos3DCCRspDeparts, docsQos3DCCRspArrives, docsQos3DCCRspDeparts, docsQos3DCCRspArrives, docsQos3DbcReqs, docsQos3DbcRsps, docsQos3DbcAcks, docsQos3DbcSuccesses, docsQos3DbcFails, docsQos3DbcPartial, docsQos3ServiceFlowSidClusterSid } STATUS current DESCRIPTION "Group of objects implemented in both CM and CMTS." ::= { docsQos3MibGroups 1 } docsQos3CmtsGroup OBJECT-GROUP OBJECTS { docsQos3UpstreamFragments, docsQos3UpstreamFragDiscards, docsQos3UpstreamConcatBursts, docsQos3ServiceFlowLogIfIndex, docsQos3ServiceFlowLogSFID, docsQos3ServiceFlowLogCmMac, docsQos3ServiceFlowLogPkts, docsQos3ServiceFlowLogOctets, docsQos3ServiceFlowLogTimeDeleted, docsQos3ServiceFlowLogTimeCreated, docsQos3ServiceFlowLogTimeActive, docsQos3ServiceFlowLogDirection, docsQos3ServiceFlowLogPrimary, docsQos3ServiceFlowLogServiceClassName, docsQos3ServiceFlowLogPolicedDropPkts, docsQos3ServiceFlowLogPolicedDelayPkts, docsQos3ServiceFlowLogControl, docsQos3ServiceClassStatus, docsQos3ServiceClassPriority, docsQos3ServiceClassMaxTrafficRate, docsQos3ServiceClassMaxTrafficBurst, docsQos3ServiceClassMinReservedRate, docsQos3ServiceClassMinReservedPkt, docsQos3ServiceClassMaxConcatBurst, docsQos3ServiceClassNomPollInterval, docsQos3ServiceClassTolPollJitter, docsQos3ServiceClassUnsolicitGrantSize, docsQos3ServiceClassNomGrantInterval, docsQos3ServiceClassTolGrantJitter, docsQos3ServiceClassGrantsPerInterval, docsQos3ServiceClassMaxLatency, docsQos3ServiceClassActiveTimeout, docsQos3ServiceClassAdmittedTimeout, docsQos3ServiceClassSchedulingType, docsQos3ServiceClassRequestPolicy, docsQos3ServiceClassTosAndMask, docsQos3ServiceClassTosOrMask, docsQos3ServiceClassDirection, docsQos3ServiceClassStorageType, docsQos3ServiceClassDSCPOverwrite, docsQos3ServiceClassRequiredAttrMask, docsQos3ServiceClassForbiddenAttrMask, docsQos3ServiceClassAttrAggrRuleMask, docsQos3ServiceClassAppId, docsQos3ServiceClassMultiplierContentionReqWindow, docsQos3ServiceClassMultiplierBytesReq, docsQos3ServiceClassMaxReqPerSidCluster, docsQos3ServiceClassMaxOutstandingBytesPerSidCluster, docsQos3ServiceClassMaxTotBytesReqPerSidCluster, docsQos3ServiceClassMaxTimeInSidCluster, docsQos3ServiceClassPeakTrafficRate, docsQos3ServiceClassDsResequencing, docsQos3CmtsIfIndex, docsQos3GrpServiceFlowIsDef, docsQos3GrpServiceFlowQosConfigId, docsQos3GrpServiceFlowNumSess, docsQos3GrpPktClassGrpConfigId, docsQos3UpChCounterExtSgmtValids, docsQos3UpChCounterExtSgmtDiscards, docsQos3ServiceFlowCcfStatsSgmtValids, docsQos3ServiceFlowCcfStatsSgmtLost, docsQos3CmtsDsidUsage, docsQos3CmtsDsidDsChSet, docsQos3CmtsDsidReseqWaitTime, docsQos3CmtsDsidReseqWarnThrshld, docsQos3CmtsDsidStatusHldoffTimerSeqOutOfRng, docsQos3CmtsDsidCurrentSeqNum, docsQos3CmtsDebugDsidRowStatus, docsQos3CmtsDebugDsidStatsDsidPackets, docsQos3CmtsDebugDsidStatsDsidOctets } STATUS current DESCRIPTION "Group of objects implemented in the CMTS only." ::= { docsQos3MibGroups 2 } docsQos3CmGroup OBJECT-GROUP OBJECTS { docsQos3CmServiceUsStatsTxSlotsImmed, docsQos3CmServiceUsStatsTxSlotsDed, docsQos3CmServiceUsStatsTxRetries, docsQos3CmServiceUsStatsTxExceededs, docsQos3CmServiceUsStatsRqRetries, docsQos3CmServiceUsStatsRqExceededs, docsQos3CmServiceUsStatsSgmts, docsQos3CmDsidUsage, docsQos3CmDsidNumReseqChs, docsQos3CmDsidReseqChList, docsQos3CmDsidReseqWaitTime, docsQos3CmDsidReseqWarnThrshld, docsQos3CmDsidStatusHldoffTimerSeqOutOfRng, docsQos3CmDsidOutOfRangeDiscards, docsQos3CmDsidNextExpectedSeqNum, docsQos3CmDsidCmInterfaceMask, docsQos3CmDsidFwdCmInterfaceMask, docsQos3CmDsidStatsSeqNumMissing, docsQos3CmDsidStatsSkewThreshExceeds, docsQos3CmDsidStatsOutOfRangePackets, docsQos3CmDsidStatsNumPackets, docsQos3CmDsidClientClientMacAddr } STATUS current DESCRIPTION "Group of objects implemented in the CM only." ::= { docsQos3MibGroups 3 } END