--___________________________________________________________________________ -- -- Title: GDC DV2 MIB. -- Date : January 1997 -- Version: 4.30 -- -- Boot Area -- -- -- This ASN file comprises two major areas. The BOOT area is used for the boot -- strap code and this comprises a subset of the total file. The area which is -- only used for the boot code is marked with comments. -- -- Description Fields -- -- -- The description fields have three functions in this MIB definition:- -- -- . They are used to provide the "pop-up" help messages for the DV2 switch -- code. -- -- . They are available for use by the NMS to display help information for the -- elements. -- -- . They describe the actual MIB elements. -- -- -- --___________________________________________________________________________ -- Revision History : -- NOTE: -- Please maintain this section in reverse chronological order. Be -- specific as to where the changes are made but do not place markers -- (search patterns) in the file. -- Please have an MR for all changes and clear all changes through -- Dave Danenberg (or a proxy for him) before putting changes into -- a build. -- -- Date Engineer AR # Description -- ========================================================================== -- 06-Mar-98 J. Turner AR-NONE: Make mpro/slave ".asn" compatible. Add "eth", "qtlim" -- "not-ready", "INTEGER" for gauge, link-3. Billing and OAM -- are uneffected. Make qeDocTunClp entry #31 to match Slave MIB -- definition. QeDoc only in slave. -- #13 05-Mar-98 J. Turner AR4953 Update: Add "none" to slot0PhyLstChngPrevLnkStat -- define. Also add DEFVAL{ } to new variables. -- 03-05-98 M. Apergis AR5330 : Rename NTM state machine states from -- acquisition to acquisition-wide-band, and from -- reference-out-of-range to acquisition-narrow-band -- #11 19-Feb-98 J. Turner AR4954 : Fixed clockAlarm trap variable list sequence. -- 02/16/98 N. Walker AR5194 added j2QualClock -- 13-Feb-98 J. Turner AR4953 : Add INTEGER description, more comments. -- 12-Feb-98 J. Turner AR4953 : Correct slot0PhyLstChngPrevLnkStat and -- slot0PhyLstChngLnkNum table order. -- -- #10 06-Feb-98 J. Turner AR4954 : Create SysClkAlarmErr variable. Include in -- clockAlarm trap with primary and secondary info -- and inService variables. -- AR4951 : Create limTypeStatus variable. Include in -- lim-fault and lim-oper traps. -- AR4953 : Create slot0PhyLstChngPrevLnkStat and -- slot0PhyLstChngLnkNum variables. Include in the -- linkChanged trap. -- 1/22/98 A.S.Arvind DT related svcCellRateTable & svcTrafficTable -- 1/22/98 A.S.Arvind DT related JH port of ubr(0) -- 12/23/97 A. Lorenzo AR5094 -- Modified oamVcaBlockSize & oamVcbBlockSize to -- oamVcaPMBlockSize & oamVcbPMBlockSize. -- 12-11-97 N. Walker -- Added CRC counter for J2 LIM -- 06-Nov-97 J. Turner AR none? -- Add ipas(149) and ipap(150) to slot0PhyType entry lists -- 11-05-97 T.Pandolfe - Added trap types for AIS/RDI Received -- 10-27-97 A. Lorenzo - Added tables oamVcaTable and oamVcbTable -- for OAM configuration. Also modified table -- oamLoopbackTable to add oamLoopbackLocId. -- 15-Oct-97 J. Turner AR 4167 -- Add Y2K changes, deprecate DateTimeString usage and replace -- with DateAndTime convention. Add "M2" suffix to replaced MIBs. -- 10-07-97 A.S.Arvind Retry Period Added svcRetryPeriod in svc group -- 9-25-97 A.S.Arvind/D.Garg AR4321/4322 minor spelling fix & again -- made HalfConCnt READ-ONLY -- 5-21-97 D. Mathur added OamDisable Mib element AR4331 -- 5-20-97 D. Santoli AR 1610 -- Removed SIZE (8) from pdh E3 trail trace PhysAddress objects. -- -- 5-20-97 M. Beauchemin -- Added DQ7 trap for flash access problem -- AR3918 -- 5-05-97 W. Emery -- Added sdhCIdleCell -- Ref: AR 4356, CTR 960307 -- -- 4-24-97 Y. Wang -- AR4418. Obsolete BillLogToDisk. -- AR4419. Change billLost to read-write access. -- -- 4-3-97 R. Anumulapally AR4352 -- Added ranges to the following: -- fRelConfN391, fRelConfN392, fRelConfN393, fRelConfT391, fRelConfT392. -- Renamed dxdoc links A and B to links 0 and 1. -- -- 4-01-97 Y. Cusson -- Added mpeg LIM MIB information. -- -- 3-25-97 B. Forrest -- Merged changes in mpro line of devempment -- -- 3-18-97 N. Walker -- changed frdoc back to frac -- -- 3-13-97 B. Forrest -- moved the added oids sdhStmSts and sdhAPSOnOff to bottom -- of table where they belong. -- -- 2-19-97 M. Beauchemin added support for mac2 shelf -- -- 2/17/97 M. Apergis -- Changed NTM Config and Status tables for E1 NTM. -- -- 1-29-97 C. Liang -- Added "routeLoadFail" and "DTLLoadFail" two new traps -- -- 1-28-97 C. Liang -- Added yet more fields in VC status table -- -- 01-27-97 R. Byczko -- Made adjustments to support STS-3c/STM-1 LIM, close cousin to OC3 LIM, -- except first is electrical and second is optical. -- -- 1-25-97 C. Liang -- Added more fields in VC status table -- -- 1-14-97 C. Liang -- Changed max pt-mpt trees from 10 to 3; max parties from 3 to 10 -- -- 1-13-97 C. Liang -- Obsoleted following objects: -- pvcForwardCellRateTotal, pvcForwardCellRateAvailable, -- pvcBackwardCellRateAvailable, svcForwardCellRateTotal, -- svcForwardCellRateAvailable, svcBackwardCellRateAvailable -- -- 02-12-97 M. Beauchemin -- Corrected Sdh table putting sdhStmSts and sdhAPSOnOff last -- -- 01-20-97 J. Wenninger Made the following changes to support -- CAS on the DS1 LIM -- Added signaling states to the ds1V2LimType -- entry. -- Added link0 -> link3 to the ds1V2TxClkSel -- entry. -- 01-31-97 R. Byczko -- Made adjustments to support STS-3c/STM-1 LIM, close cousin to -- OC3 LIM, except first is electrical and second is optical. -- -- 12-26-96 M. Apergis -- Added "stop" option to sysLkState. -- -- 12-23-96 C. Liang -- Changed max leaves per tree range from (0..16) to (0..500) -- -- 12-20-96 Y. Wang -- Add billDirControl object for billing direction control. -- -- 12-2-96 C. Liang -- Added MIB items for pt-mpt SVC support -- -- 12-20-96 Y. Wang -- Add billDirControl object for billing direction control. -- -- 12-11-96 E. Zheng -- Changed pvcForwardCellRateTotal to read-only object (AR 3958) -- Changed svcForwardCellRateTotal to read-only object (AR 3958) -- -- 12-06-96 P. Cassella -- Added new Slot0PSUType for MAC2 shelf -- -- 10-29-96 E. Zheng -- Changed max pt-pt SVC connections from 500 to 750 -- Changed max Sap connections from 500 to 750 -- Changed max sPvc Id from 500 to 750 -- -- 10-26-96 Y. Wang -- Change DOC card name from frac to frdoc. -- -- 10-21-96 C. Liang -- Changed default max pt-pt SVC connections from 100 to 25 -- -- 10-17-96 C. Liang -- Added "idle" option to SAP status -- -- 10-07-96 W. Emery -- Removed ranges for vidEncBitRate and audBitRate -- Changed units in DESCRIPTION fields of vidEncBitRate -- and audBitRate (from Kbps to bps) -- -- 09-25-96 G. McCabe -- Edit Cac Mib Descriptions -- -- 09-24-96 M. Beauchemin -- changed ACS define from ac to as -- -- 9-09-96 X. Liu -- Changed SpvcId configuration range from 500 into -- 750 for ACP and ACS -- -- 09-13-96 X. Liu -- Merged new Mib items for ACP and ACS support from -- Continnus/V420H build into CVS -- -- 09-11-96 J. Wenninger -- Corrected AR 3439: Changed JT2 to J2, Also changed -- "Quality of Clock" to "System Timing Reference" -- -- 09-11-96 J. Wenninger -- CHANGE: Added a new entry for SI (SCF) LIM -- -- 09-11-96 P.Cassella -- CHANGE: Added a new entry for j2 LIM as well as TRAP definition -- -- 09-05-96 G. McCabe -- Added Cac Mib items. -- 8-31-96 X. Liu -- Changed Mib items of memory block ID configurations -- into 4k, 16k and 64k options. -- -- 08-21-96 P. Cassella Added Ber for DS1_2C -- search for pkc -- -- 9-03-96 Y. Wang -- Add local-45Mbps(3), and local-34Mbps(4) -- to "hssiClockSrc". Change "hssiClockSrc" to read-write -- Change "hssiType" to read-write. -- -- -- 08-13-96 D. Stack 1.174 -- Added "ceStr3" to indicate Stratum3. -- -- 8-09-96 D. Stack AR3082 -- Defaulted ceDstSlot and veDstSlot to be -1 so a -- funky '-' will appear as the slot number -- -- 08-06-96 J. Wojdak Continuus-9 -- Added CAC/EBT mods. -- -- 7-29-96 C. Liang -- Changed "sPvcLink" range from 0..3 to 0..15 to support MSCC -- -- 7-25-96 W. Emery N/A -- Added vh320 LIM MIB information; made 'video' the -- only option for veMode -- -- 07-23-96 X. Liu -- Added Mib items for ACP and ACS support. -- -- 7-22-96 C. Liang -- Added "svcRestart" to allow a Restart to be sent to the -- link every time link comes up -- -- 7-22-96 C. Liang -- Added "svcE164Addr" for each SAP indicating the E164 address -- of the other side of the link -- -- 7-12-96 C. Liang -- Disallow SCR Clp0+1 Tagging option -- -- 7-9-96 C. Liang -- Split usage of cell buffers into "signalling quota" and -- "IP quota" (non-signalling). -- -- 6-25-96 C. Liang -- Added new traps "svcQsaalUpDown", "svcQsaalReset" and -- "svcT309Expiry". -- -- 6-21-96 C. Liang -- Added "trap on state change" option to SPVC alert config -- -- 6-12-96 X. Liu N/A ??? -- CHANGE: Added xpDiscardCells to -- Switch Fabric status table. -- -- 6-4-96 C. Liang -- Integrated SVC 3.1 and MSCC -- -- 05-28-96 G. McCabe -- Added Cac Mib items. -- -- 5-6-96 X. Liu N/A 1.153 -- CHANGE: Added sdhStmSts and sdhAPSOnOff to -- SDHSonet config table. -- -- 5-6-96 J. Huang -- Added VPI/VPCI Mapping and QoS associated VPCI selection -- ELEMENTS: svcVpiMapping & svcQosRoute -- -- 4-3-96 C. Liang -- CHANGE: Make "svcHalfConCnt" writable also -- -- 3-27-96 D. Chen -- CHANGE: AR 2802: Change ILMI 'connected' state to 'idle'. -- -- 3-18-96 C. Liang -- CHANGE: Changed options of "LoadRoutes" -- -- 3-14-96 C. Liang -- CHANGE: Changed default value of T308 timer from 15 to 30 seconds -- -- 3-14-96 M. Khalil AR2968 -- CHANGE: Added a new TRAP definition for detection of -- duplicate IP address. -- 03-14-96 D. Stack N/A 1.153 -- CHANGE: Fixed merge problems -- -- 03-14-96 X. Liu N/A 1.152 -- CHANGE: Add MIB element "unknown" for link -- management connectivity status. -- -- 03-13-96 D. Stack AR3061 1.151 -- CHANGE: Removed all ceLeafxxx,veLeafxxx, -- ceSrcxxx, and veSrcxxx MIB variables -- as they were confusing to the user. -- They have been replaced with equivalent -- variables in dv2ce.c. -- -- 03-13-96 D. Stack AR3059 1.151 -- Changed enumerations for pvcDirection. -- -- 03-12-96 D. Chen 2725 1.150 -- CHANGE: Add OAM Statis MIB items to OAM table. -- -- 03-06-96 D. Chen 3011 1.149 -- CHANGE: Add lmiOnOff to ILMI config table. Also added -- MIB elements for link mamt. -- -- 03-05-96 D. Chen 2823, 1.148 -- CHANGE: Added lmiPrefix to ILMI config table. -- -- 03-05-96 D. Stack N/A 1.147 -- CHANGE: Added SRTS status variables cePriVal, ceSecVal, -- ceClkSel, and ceClkInp. -- -- 03-01-96 S. Hegde/J. Huang -- CHANGE: Added svcSwtch item for UNI31 and IISP -- -- 02-28-96 J. Huang -- CHANGES: Added support for multiple signalling -- -- 02-27-96 D. Stack AR3026 1.145 -- CHANGE: Since cannot enumerate 0, offset ceSrcLink, -- veSrcLink, ceDstLink, veDstLink, ceLeafDstLink, -- veLeafDstLink by 1. -- CHANGE: Changed enumerations for ceXhInt and veXhInt, -- removing warnings and errors from smic. -- -- 02-23-96 D. Stack N/A 1.144 -- CHANGE: Added pvcDirection item, which determines if a -- multicast PVC is to be unidirectional or -- bidirectional. -- CHANGE: Added ceSrcSlot, ceSrcLink, ceSrcVpi, ceSrcVci, -- ceLeafDstSlot, ceLeafDstLink, ceLeafDstVpi, -- ceLeafDstVci, ceLeafSrcVpi, ceLeafSrcVci, -- ceMulticast, ceXhInt, veSrcSlot, veSrcLink, veSrcVpi, -- veSrcVci, veLeafDstSlot, veLeafDstLink, veLeafDstVpi, -- veLeafDstVci, veLeafSrcVpi, veLeafSrcVci, -- veMulticast, veXhInt for support of CE/VE multicast. -- (see the CE/VE Multicast SAS/SRS for more info) -- -- 1-22-96 J. Chagnon AR2818 -- CHANGE: Redesigning SF redundancy: Adding the XpInUse (dv2slot0 2) -- MIB item back in. Was commented out for change on 8/28/95. -- -- 2-7-96 C. Liang -- CHANGE Make "svcLoadRoute" multiple options rather than just -- "yes" and "no" -- -- 01-31-96 C. Liang -- CHANGE Added "svcHalfConnect" trap type; -- Added "svcMaxSapConn" & "svcCurSapConn" for implemention -- of Max SVC connection on per SAP basis. -- -- 01-25-96 J. Chagnon -- CHANGE: Add changes to take E1 stuff out of NTM MIB -- Added to slot 0 cfg, S0DOC type. -- Added traps # 157-162 for NTM -- -- 01-24-96 T. Shanley -- CHANGE: Fix syntax problems detected by SMIC compiler. -- -- 1-2-96 C. Liang -- CHANGE: added "slot0SwitchId" and "svcLoadRoute" in supporting -- DTL route implementation -- -- 12-13-95 M. Khalil -- CHANGE: changed the default value for ds1V2GappedClk -- from no(2), to yes(1). -- Fixed Sytax Errors. -- -- 12-13-95 J. Chagnon 1.131 -- CHANGE: Update NTM card section -- 11/30/95 M. Drost 1.130 -- CHANGE: Change 'aco' status in alarm handler to 'crit-aco', -- 'maj-aco' or 'min-aco' for clarity; -- -- 11/15/95 Y. Wang 1.129 -- CHANGE: Deprecate lfdoc and hfdoc in slot0PhyType object. -- -- 11/15/95 D. Stack See below 1.128 -- CHANGE: - Removed vidInSubSmapl (unchangeable) and replaced it -- with vidInTransMode (same OID and same default values, -- which should prevent compatibility problems). -- (MR000000000002368) -- - Made "full" only option for vidInFrameRate. -- - Changed options for jpegReset to be "no" and "reset" -- (MR000000000002438) -- - Removed unsupported baud rates from jpegSlipSpeed -- (57600 and 115200) (MR000000000002495) -- - Made default for vidOutSource "through" (MR000000000002594) -- -- 11/13/95 D. Chen 1.127 -- CHANGE: - Add address format into ILMI control table. -- -- 11/03/95 M. Drost 1.126 -- CHANGE: - Add alarmHandler group. -- - Comment out ForcedReload trap and noUserFile trap; these are -- no longer supported. -- - Rename the 'greater-than-655-feet' option to 'more-than-655-feet' -- under the LineLength options for the ds1Table and ds1V2Table. -- - Remove slot0SwitchStatus and slot0SetAlarm. Because these are leaf -- objects, they can safely be removed (just table objects cannot be -- removed). -- - Add traps for user status inputs for the new APEX, MAC & MACI chassis. -- -- 10/30/95 Y. Wan -- 1.125 -- CHANGE: Change slot0PsuType and slot0PhyType -- object display. -- -- 10-28-95 Jim Chagnon 1.124 -- FEATURE : Add NTM Card group in System Clocks section -- -- 10/26/95 D. Chen 1.123 -- CHANGE Change default ILMI vci to 10 from 16. -- -- 10/20/95 M. Libby -- CHANGE: Added default values for HSSI table. -- -- 10/20/95 Y. Wang 1.120 -- FEATURE: Add enabling of SVC billing and SVC/PVC billing -- to billingControl object. -- Add billTag to billing table. -- Add billRecordControl, billLost, billLinks and -- billTrapControl to billing group. -- Add block-invalid(3) to billValid entry. -- -- 10/18/95 M. Libby 1.119 -- CHANGE: Added LOS defect/alarm/trap to HSSI Table. -- Added DTC/DCE (Not) Ready traps. -- -- 10/16/95 D. Chen 1.118 -- CHANGE: Add dv2Lmi group. -- -- 10/10/95 M. Libby -- CHANGE: Made changes to the HSSI DLIM Table. -- -- 10/03/95 Y. Wang 1.115 & 1.116 -- CHANGE: Change MAC to atm-switch in slot0PsuType object -- -- 09/28/95 C. Liang 1.114 -- CHANGE: Added new objects in pvcTable to support multicast PVC -- -- 09/27/95 D. Chen 1.113 -- CHANGE: Add 'physical loopback detected' to loopback -- test result. -- -- 09/26/95 Y. Wang 1.112 -- CHANGE: Remove dv2 from slot0PhyType object and -- Change APEX to ATM-SWITCH in slot0PsuType -- object for generic user interface of MIB display. -- -- 09/18/95 D. Chen 1.111 -- CHANGE: Add dv2OAM group -- -- 09/16/95 M. Khalil -- CHANGE: Re-arranged dv2DS group so that oids appear in -- increasing numerical order. It has to be this -- way because snmp-get-next uses binary search -- to search generated tables which means that -- the oids have to be sorted. -- -- 09/14/95 M. Drost 1.109 -- CHANGE: Remove mods from rev 1.104; although these mibs were -- not supported until 4.0, they were physically present -- in 3.2 and therefore in the 3.2 config files. To make -- the desired change, the existing DS3-2C and E3 DLIM tables -- are being depricated and new tables added. -- -- 09/13/95 Y. Wang 1.107 & 1.108 -- CHANGE: Change billingControl object to include: -- stop-billing-process(1), -- start-SPVC-billing-process(2), -- start-PVC-billing-process(3), -- start-SPVC-PVC-billing-process(4), -- delete-all-billing-records(5) -- -- 09/12/95 M. Drost 1.104 -- CHANGE: Removed the unipolar/bipolar user configurable from -- the DS3 and E3 DLIM tables. These tables are new -- to 4.0, so removals should be allowed. -- -- 9/9/97 M. Khalil -- CHANGE Added new value for Tunnel State. -- -- 09/07/95 Drost/Filippon 1.103 -- CHANGE: Fix syntax errors. -- -- 9/7/95 Y. Wang 1.102 -- Change BillLogToDisk to read-only. -- -- 9/7/95 J. Huang 1.101 -- CHANGE save mac address in slot0 physical table for -- redundent slot0 -- -- 9/1/95 J. Huang 1.100 -- CHANGE Added trap for Out of Link Resource -- -- 08/29/95 Y. Wang 1.99 -- CHANGE: Move pdhPLCPLpbkTimeout from pdhPLCPEntry 12 to -- pdhPLCPEntry 14 for compatibility. -- Change BillLogDisk from read-only to not-accessible. -- -- 8/29/95 J. Huang 1.98 -- CHANGE: Low priority overbook implementation -- -- 08/29/95 Y. Wang 1.97 -- CHANGE: Change revision history -- -- 08/29/95 Y. Wang 1.96 -- CHANGE: Change BillLogToDisk status to obsolete. -- We no longer need to implement this object. -- -- 08/28/95 J. Huang 1.94 -- CHANGE: 1. -- Switch fabric redundency MIB. Deleted old xpInUse group. -- Modified xpToUse to include the xp status. -- 2. -- Added link resource overbook factor to be used to by CAC. -- -- 08/25/95 M. Libby 1.93 -- CHANGE: JPEG changes. Added load configuration and changed the names -- for the file download. Also, removed send configuration item. -- -- 08/22/95 M. Drost 1.92 -- CHANGE: Mods to some of the SDH traps - some were sending the -- defect oid instead of the alarm oid. -- -- 08/18/95 D. Stack n/a 1.91 -- CHANGE: Changed default value of veCDV to 31 and -- veCDVMax to 62 to prevent card coming up -- in overflow state. -- REMOVE: ceNB and veNB - not used anywhere. -- -- 8/17/95 MD/ML 1.90 -- Change Add clockActiveRef to indicate timing source switches. -- Add "unknown" status to the pdhPLCPChipType and make it -- the default. -- -- 8/12/95 C. Liang 810654,810997,811142,811156 1.89 -- Change - Allow policing to be turned off on per SPVC basis -- - Allow policing to be turned off on per SAP basis -- - Allow CDV Tolerance size to be configurable -- - Allow interface to be either NETWORK or USER -- - Changed "best-effort" to be of value 5, instead of 0. -- - Changed "svcHiLo' to be 1 or 2, instead of 0 and 1. -- -- 08/12/95 M. Drost 1.88 -- CHANGE: Break previous SDH status table into 2 new status tables; -- there was too much information to display on one screen, and -- it looked horrible! -- -- 08/10/95 M. Drost/A. Filippone 1.87 -- CHANGE: Comment out obsolete traps and add new traps for LIM alarms. -- Add LOCD alarm to pdhPLCP table. -- -- 8/10/95 J. Huang 1.86 -- CHANGE: Changed VP/VC ranges in SVC resource table as read only -- -- 08/07/95 D. Stack n/a 1.85 -- REMOVE: Took out ceLIM and veLIM - all that was -- displayed was a number for the LIM ID and it -- confused users. No compatibility problem in -- that versions with these were engineering -- internal releases only. (As a side effect, -- all ce/ve OIDs following these have been -- decremented by 1.) -- -- 08/07/95 M. Drost 1.84 -- CHANGE: Fixes to previous revision to follow MIB change rules. -- -- 08/05/95 Y. Wang CTR#950617 1.83 -- CHANGE: Add pdhPLCPLpbkTimeout to pdhPLCPTable -- Add sdhCLpbkTimeout to sdhCTable -- Add dlimLpbkTimeout to dv2ds -- FEATURE: The changes enable recovery of management communications -- after loopback times out. -- -- 08/05/95 M. Drost 1.82 -- CHANGE: Cosmetic changes to DS1 line length selection names; Expand on -- DS3-2C loopback choices. -- -- 8/3/95 C. Liang #811015 1.81 -- CHANGE Added "Best effort" option to QOS class in sPvcTable -- -- 8/3/95 C. Liang #811204 1.80 -- CHANGE Added "svcQ93bStatClr" and "svcQsaalStatClr" in -- svcQ93bStatTable and svcQsaalStatTable, so -- Q.93B and Q.SAAL statistics can be cleared. -- -- 07/28/95 M. Drost/M. Libby 1.78 -- CHANGE: Rename local link clocking to PLCP clocking. -- Add solim version 0 for the pre-clocking LIMs. -- Add Chip version to PDH MIB. -- -- 07/21/95 M. Drost/M. Libby 1.77 -- CHANGE: Add Excessive BER defect/alarm to various LIM MIBs. -- Add ds1TxClkSel to old ds1 DLIM. -- Add gaps to new DLIM mibs to allow for future additions -- in the appropriate sections. -- -- 7/19/95 C. Liang n/a 1.76 -- CHANGE: Changed "svcLink" to "svcHiLo" in SvcResourceTable to indicate -- SAP VPI/VCI to start from low or high number. The use of -- "svcLink" has become obselete. -- -- 07/17/95 D. Stack N/A 1.75 -- CHANGE: Changed ceEnable/veEnable to have a restart option. -- Added ceStatReset/veStatReset between -- ceStatPortNo/veStatPortNo and ceStatTxState/veStatTxState, -- enabling the user to reset CE/VE counts. This pushed all -- status items down one entry. -- Removed jpeg as an option for ceMode. -- Made jpeg the only option for veMode and made it read-only. -- -- 07/19/95 M. Drost 1.74 -- CHANGE: -Rename DS3 Clear framing to M23 -- -- 07/17/95 M. Drost/M. Libby 1.73 -- CHANGE: -Rename PLCP Mode selections -- -Add jpegReset and jpegSWRev -- -- 07/17/95 J. Chagnon 1.72 -- CHANGE: Add disable into slot0touse again -- -- 07/06/95 M. Khalil 1.71 -- CHANGE: added new mib variable (slot0IntIPMask) for the internal -- subnet. -- -- 07/12/95 J. Huang 1.70 -- CHANGE: Changed name of PVC restart to PVC wait -- 07/10/95 M. Drost 1.69 -- CHANGE: Incorporate gaps into PDH mibs to allow for future configurables -- to be added after the existing configuraables without changing -- the oids of the status items. -- -- 07/06/95 M. Drost 1.67/1.68 -- CHANGE: Change idle cell selection in the pdhPLCPTable; Rearrange entries -- in pdhPLCPTable, pdhDS3Table, and pdhE3Table to make it more -- user friendly. These are new entries, they have not been released -- yet, so can be rearranged! -- - Change naming of ds1V2Coding enumerations. -- -- 7/6/95 D. Stack N/A 1.66 -- CHANGE: Added ceCDVMax/veCDVMax, reflecting max value in FIFO -- before overflow. -- Swapped ceStatTxState and ceStatRxState such that -- Tx is transmitting to LIM, Rx is receiving from -- LIM. Also changed states of ceStatRxState. -- Changed ceTxCnt, ceRxCnt, ceOflCnt, ceDisCnt, ceInvCnt, -- ceResCnt, ce FifoLvlCnt, and ceUflCnt from integers -- to counters. Performed same change for ve counterparts. -- Changed descrpition of ceNB/veNB to indicate it is for -- GDC use only and made it default to NO. (User playing -- with this will have no effect) -- -- 6/29/95 D. Stack N/A 1.63 -- CHANGE: Added ceFifoLvlCnt, ceUflCnt, veFifoLvlCnt, veUflCnt. -- These are used to track the level of the FIFO and -- the number of underflow seconds. -- Also changed coOflCnt and veOflCnt to reflect only -- overflow seconds (previously also included underflow) -- -- 6/19/95 M. Khalil 1.62 -- -- CHANGE : Added internalReset trap to indicate that a software restart -- due to an internal error. -- -- -- 6/29/95 D. Stack 1.62 -- -- Change: Added Traps for AAL1 fault & recovery intended for -- DV2CE and DV2VE -- -- 6/29/95 Drost 1.61 -- Added performance parameters; misc traps -- -- 6/27/95 Drost/Libby 1.60 -- CHANGE: Added misc traps: LIM Fault/Operational, PSU Absent, -- Switch Fabric -- redundant swap, excessive Bit Error Rate Active/Clear; -- Added soLimDesc to SOLIM DLIM; -- Added PLCP clocking selections; -- Added Reconfig entires to all DLIM tables -- -- 6/26/95 Drost/Libby/Johnson 1.59 -- CHANGE: Added new PDH support (to eventually replace old plpp), -- MJLIM support, Full Feature Clocking (to replace dv2clocks), -- -- 6/22/95 J. Huang 1.58 -- CHANGE: Added PVC restart state -- -- 06/19/95 D. Stack N/A 1.57 -- CHANGE: Add dv2VE group based on dv2CE group -- -- 06/21/95 Z. Iqbal/M. Khalil 1.56 -- CHANGE: Add Added 2 traps restart040 and alcTxError -- and moved e1-2C-LOS-SET and e1-2C-LOS-CLR -- to the end of the trap section. -- -- 06/15/95 J. Chagnon 1.55 -- CHANGE: Add disable into slot0touse -- -- 06/01/95 D. Stack/T Johnson 1.54 -- CHANGE: Add ds1_2c and ds1_4c support -- Deprecated ds1V2LimClkSel, ds1V2LimClkStat -- ceErrCnt to ceOflCnt -- Descriptions for ceOflCnt, ceDisCnt, and ceInvCnt, -- and ceResCnt to refer to number of errored Seconds. -- Swapped order of fifokick and narrowband in -- ceStatRxState to keep in step with dv2CE changes. -- -- 5/31/95 T. Johnson N/A 1.53 -- Add dv2CE group -- Add dv2ce to Slot0PhyType -- Add vjlim and e1_4c to Slot0PhyDlim -- Add defects/alarms/counts to e1Table -- Add e1-2C LOS Traps -- -- 5/30/95 Y. Wang N/A 1.52 -- CHANGE: Change trap name from bill25%full and -- bill75%full to bill25pstfull and bill75pstfull. -- 5/30/95 Y. Wang N/A 1.51 -- FEATURE: Modify revision history -- Add traps bill25%full and bill75%full -- Add billCLP1OutC and billCLP1Out -- for billing feature. This revision is -- built on the top of revision 1.49. -- -- 5/30/95 Y. Wang N/A 1.50 -- FEATURE: Ignore this revision, -- -- 5/20/95 Y. Wang N/A 1.49 -- FEATURE: Add revision history -- -- 5/10/95 Y. Wang 0811076 1.45 -- SYMPTOM: Negative display of cell counters & cell rates. -- FIX: All the MIBs that should be counters and gauges -- are redefined. -- 5/23/95 J. Chagnon N/A 1.48 -- FEATURE Add disabled status to slot0inuse -- -- 5/22/95 J. Chagnon N/A 1.47 -- FEATURE Add slot0redmode to dv2slot0 group (17). -- Add traps #76 and #77 for coming into service. -- -- 5/8/95 C. Liang N/A 1.44 -- CHANGE: Changed the object "sPvcNextTry" in the sPvcTable -- to "sPvcConnectTime". The use of "sPvcNextTry" -- has become obslete, so it is changed to be the -- connection time in ms in establishing a call. -- This is part of SPVC software performance -- enhancement. -- -- 4/26/95 D. Stack N/A 1.42 (ignore 1.41) -- CHANGE: Changed ranges for fraPStatDlci, FrbPStatDlci, -- fraPConfigDlci, frbPConfigDlci to be (16..511) -- to reduce memory usage on the 302. Also, -- removed reference to difference between MS and -- MP ranges, as the above changes remove that -- difference. -- -- 4/17/95 M. Drost 0810317 1.40 -- CHANGE: Enumerate the sdhSPathLabel variable. -- -- 4/12/95 D. Kreitner 811043 1.39 -- -- FEATURE : reference new E3 LIM as E3-2C -- CHANGE : Correct E3 & E1 to *-2C for -- appropriate entries. -- -- 4/10/95 J. Chagnon 1.38 -- -- FEATURE : Add revision history section -- CHANGE : Add revision history section -- -- 4/7/95 C. Liang 811014 1.37 -- -- FEATURE : Add alert cfg when a call clears -- CHANGE : Modify sPvcAlertFailures section and other -- small changes. -- -- 3/24/95 W. Penn 1.36 -- -- SYMPTOM : Does not comply with ATM Forum Requirements -- FIX : Add plppV2FrmFmt - display far end's framing -- -- FEATURE : Add additional diagnostic capability -- CHANGE : Add plppV2CTxAIS - Enable framer to xmit AIS -- -- FEATURE : Add additional status -- CHANGE : Add plppV2SDs3LPBK - DS3 framer is in loopback -- Add plppV2SLOC - Receive loss of cell delineation -- Add plppV2SRxIDL - Idle is being received -- -- 3/23/95 C. Liang 810970 1.35 -- -- SYMPTOM : When a call is active the called party cannot -- terminate the call. -- CAUSE : Not implemented properly. -- FIX : In svcStatus, eliminate awaiting-clear. -- 3/20/95 C. Liang 1.34 -- -- SYMPTOM : 501 SPVCs allowed. Should only be 500. -- CAUSE : Implementation problem -- FIX : Changed sPvcId range from (0..500) to (1..500) -- -- 3/17/95 D. Kreitner 1.33 -- -- FEATURE : Add traps for E3-2C LCD -- CHANGE : Added trap types e3RecLCD and e3ClrLCD. -- -- 3/09/95 Penn/Khalil 1.32 -- -- SYMPTOM : Syntax problems -- CAUSE : It's been this way for a while. -- FIX : In PlppV2CEntry, put a comma after INTEGER -- In PlppV2Ds3FrmFmt, PlppV2SDs3FEACTxmt and ds3V2TxClksel, -- replace underscores with hyphens. -- In PlppCEntry, remove the "2". -- -- GDCARC's APEX-DV2 switch Enterprise MIB --_____________________________________________________________________________ -- Notes - 9-30-94 -- When using doitall, the following changes needed to be made: -- Uncomment 'FROM groups.asn' -- Comment out the following declarations: -- E164 -- E164SUB -- DateTimeString -- Hex -- Q93bCauseDiag -- netcomm OBJECT IDENTIFIER ::= { enterprises 251 } -- products OBJECT IDENTIFIER ::= { netcomm 1 } Enterprise MIBs for specific products -- dv2 OBJECT IDENTIFIER ::= { products 1 } D2 ATM switch -- Change all instances of Q93bCauseDiag to q93bCauseDiag. -- -- This should make doitall work. -- -- Mark Libby --_____________________________________________________________________________ -- -- -- DV2-MIB DEFINITIONS ::= BEGIN IMPORTS -- FROM groups.asn -- dv2 -- FROM GROUPS enterprises, IpAddress, Counter, Gauge FROM RFC1155-SMI DisplayString, PhysAddress FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 OBJECT-TYPE FROM RFC-1212; --___________________________________________________________________________ netcomm OBJECT IDENTIFIER ::= { enterprises 251 } products OBJECT IDENTIFIER ::= { netcomm 1 } -- Enterprise MIBs for specific products dv2 OBJECT IDENTIFIER ::= { products 1 } -- D2 ATM switch dv2System OBJECT IDENTIFIER ::= { dv2 1 } -- System information dv2Slot0 OBJECT IDENTIFIER ::= { dv2 2 } -- Slot zero system information dv2Trace OBJECT IDENTIFIER ::= { dv2 3 } -- trace toggles dv2SlipLine OBJECT IDENTIFIER ::= { dv2 4 } -- slip configuration dv2StaticRoute OBJECT IDENTIFIER ::= { dv2 5 } -- static routing table -- dv2Clocks to be depricated in a later build - replaced by dv2SystemClocks dv2Clocks OBJECT IDENTIFIER ::= { dv2 6 } -- dv2 clock source group -- dv2Q93n OBJECT IDENTIFIER ::= { dv2 7 } -- q93n configuration dv2VcDoc OBJECT IDENTIFIER ::= { dv2 8 } -- vc doc channel config dv2FrRelay OBJECT IDENTIFIER ::= { dv2 9 } -- frame relay config/status group dv2VcStatus OBJECT IDENTIFIER ::= { dv2 10 } -- VC Status Table dv2PLPP OBJECT IDENTIFIER ::= { dv2 11 } -- PLPP status & configuration dv2LocalFibre OBJECT IDENTIFIER ::= { dv2 12 } -- Local Fibre status and configuration dv2DS OBJECT IDENTIFIER ::= { dv2 13 } -- DS type DLIM dv2Billing OBJECT IDENTIFIER ::= { dv2 14 } -- Billing Table dv2QeDoc OBJECT IDENTIFIER ::= { dv2 15 } -- QEDOC dv2SDH OBJECT IDENTIFIER ::= { dv2 16 } -- SDH dv2Pvc OBJECT IDENTIFIER ::= { dv2 17 } -- Permanent virtual circuit group dv2Svc OBJECT IDENTIFIER ::= { dv2 18 } -- Switched virtual circuit group dv2CE OBJECT IDENTIFIER ::= { dv2 19 } -- Circuit emulation group dv2VE OBJECT IDENTIFIER ::= { dv2 20 } -- Circuit emulation group for dv2VE dv2SystemClocks OBJECT IDENTIFIER ::= { dv2 21 } -- dv2 system clock driver group -- Groups suported by the M-JPEG LIM card, for now tie this to the DV2 MIB definition mjlimSlipLine OBJECT IDENTIFIER ::= { dv2 22 } -- M-JPEG LIM Slip Configuration mjlimSystem OBJECT IDENTIFIER ::= { dv2 23 } -- M-JPEG LIM System Information vidInCfg OBJECT IDENTIFIER ::= { dv2 24 } -- M-JPEG LIM Video Input Configuration Information vidOutCfg OBJECT IDENTIFIER ::= { dv2 25 } -- M-JPEG LIM Video Output Configuration Information vidInSta OBJECT IDENTIFIER ::= { dv2 26 } -- M-JPEG LIM Video Input Status Information vidOutSta OBJECT IDENTIFIER ::= { dv2 27 } -- M-JPEG LIM Video Output Status Information audInCfg OBJECT IDENTIFIER ::= { dv2 28 } -- M-JPEG LIM Audio Input Configuration Information audOutCfg OBJECT IDENTIFIER ::= { dv2 29 } -- M-JPEG LIM Audio Output Configuration Information audInSta OBJECT IDENTIFIER ::= { dv2 30 } -- M-JPEG LIM Audio Input Status Information audOutSta OBJECT IDENTIFIER ::= { dv2 31 } -- M-JPEG LIM Audio Output Status Information dataCfg OBJECT IDENTIFIER ::= { dv2 32 } -- M-JPEG LIM Data Channel Configuration Information dataSta OBJECT IDENTIFIER ::= { dv2 33 } -- M-JPEG LIM Data Channel Status Information mjlimControl OBJECT IDENTIFIER ::= { dv2 34 } -- M-JPEG LIM DSP Transfer Control dv2PDH OBJECT IDENTIFIER ::= { dv2 35 } -- PDH dv2Oam OBJECT IDENTIFIER ::= { dv2 36 } -- OAM dv2Lmi OBJECT IDENTIFIER ::= { dv2 37 } -- Interim local management interface (LMI) dv2AlarmHandler OBJECT IDENTIFIER ::= { dv2 38 } -- Alarm Handler dv2Cac OBJECT IDENTIFIER ::= { dv2 39 } -- CAC Handler dv2MS2FRAC OBJECT IDENTIFIER ::= { dv2 40 } -- FRAC dv2aal5 OBJECT IDENTIFIER ::= { dv2 41 } -- aal5 part of FRAC vhsystem OBJECT IDENTIFIER ::= { dv2 42 } -- VHsystem vhcontrol OBJECT IDENTIFIER ::= { dv2 43 } -- VHcontrol vhmgmt OBJECT IDENTIFIER ::= { dv2 44 } -- VHmanagement -- dv2SCE OBJECT IDENTIFIER ::= { dv2 45 } SCE -- dv2LimMpeg OBJECT IDENTIFIER ::= { dv2 46 } MPEG LIMs --___________________________________________________________________________ -- Specific type definitions VirtualCircuitIdentifier ::= INTEGER (0..65535) VirtualPathIdentifier ::= INTEGER (0..4095) -- Q93B addressing -- These Three definitions are commented out only for NMS3000 parsing -- first 2 octets are length, rest is 16 decimal digits E164 ::= OCTET STRING (SIZE (2..10)) -- first 2 octets are length, E164SUB ::= OCTET STRING (SIZE (2..22)) Q93bCauseDiag ::= OCTET STRING (SIZE (4)) -- A hex number, passed as an integer but displayed as a hex number. -- This Line is commented out only for NMS3000 parsing Hex ::= INTEGER (0..65535) -- The previous date/time definition, DateTimeSTring, has been replaced -- with the DateAndTime TEXTUAL-CONVENTION which is represented by 8 octets -- with the following meanings: (Y2K) -- octet 0 - year(2 bytes), 0-65535. -- octet 2 - month, 1 to 12. -- octet 3 - day of the month, 1 to 31. -- octet 4 - hours, 0 to 23. -- octet 5 - minutes, 0 to 59. -- octet 6 - seconds, 0 to 59. -- octet 7 - deci-seconds, 0-9. -- Any octet can have the value 255, indicating it is not being used or has no -- meaning for the device. -- This Line is commented out only for NMS3000 parsing DateTimeString ::= OCTET STRING (SIZE (8)) --DateAndTime ::= OCTET STRING (SIZE (8)) -- This line is included to define DateAndTime to the parser. The two -- definitions has the same number of octets. -- Must set till parser is updated.......! (Y2K) DateAndTime ::= DateTimeString --___________________________________________________________________________ -- ********************** Start of boot area **************** -- The system information group. --___________________________________________________________________________ sysMemEnd OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "The current end of run-time allocated memory." ::= { dv2System 1 } -- Y2K change : deprecated --sysLastResetTime OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Date and time board was last reset." -- ::= { dv2System 2 } -- -- Y2K change : deprecated --sysCurrentTime OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-write -- STATUS deprecated -- DESCRIPTION -- "Current date and time in the form dd Mon yyyy hh:mm:ss. -- For example:- -- 15 Aug 1994 10:12:21" -- ::= { dv2System 3 } sysInitialMemB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "initial number of memory items." ::= { dv2System 4 } sysCurrentMemB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of memory items." ::= { dv2System 5 } sysInitialSema OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Initial number of semaphores." ::= { dv2System 6 } sysCurrentSema OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of semaphores." ::= { dv2System 7 } sysInitialQItems OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Initial number of queue items." ::= { dv2System 8 } sysCurrentQItems OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of queue items." ::= { dv2System 9 } sysInitialQs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Initial number of queues." ::= { dv2System 10 } sysCurrentQs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of queues." ::= { dv2System 11 } sysInitialPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Initial number of ports." ::= { dv2System 12 } sysCurrentPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of ports." ::= { dv2System 13 } sysDefaultCellMode OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This flag indicates whether the cell interface is operating in default mode. If yes(2) then this indicates that the daughter card processor is not running its correct code." ::= { dv2System 14 } ------------------------------------------------------------------------ -- link table for the slot sysLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF SysLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about each link on this slot controller." ::= { dv2System 15 } sysLinkEntry OBJECT-TYPE SYNTAX SysLinkEntry ACCESS not-accessible STATUS mandatory INDEX { sysLkLinkNo } ::= { sysLinkTable 1 } SysLinkEntry ::= SEQUENCE { sysLkLinkNo INTEGER, sysLkKillLink INTEGER, sysLkState INTEGER, sysLkTxCells Counter, sysLkRxCells Counter, sysLkTxRate Gauge, sysLkRxRate Gauge, sysLkTxMaxRate Gauge, sysLkRxMaxRate Gauge, sysLkResetStats INTEGER, sysLkClockSrc INTEGER, sysLkResetResrc INTEGER, sysLKEgCLPThreshold INTEGER, sysLKIgCLPThreshold INTEGER, sysLKEgEFCIThreshold INTEGER, sysLKIgEFCIThreshold INTEGER, sysLKEgLogBuffer INTEGER, sysLKIgLogBuffer INTEGER, sysLKEgFIFODepth INTEGER, sysLKIgFIFODepth INTEGER, sysLKEgMemBlockId INTEGER, sysLKIgMemBlockId INTEGER } sysLkLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "The link number on the slot" ::= { sysLinkEntry 1 } sysLkKillLink OBJECT-TYPE SYNTAX INTEGER { no(1), restart(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to restart(2) to kill this link" ::= { sysLinkEntry 2 } sysLkState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), stop(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the link" ::= { sysLinkEntry 3 } sysLkTxCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells sent from link" ::= { sysLinkEntry 4 } sysLkRxCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells received to link" ::= { sysLinkEntry 5 } sysLkTxRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Cells per second sent from link" ::= { sysLinkEntry 6 } sysLkRxRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Cells per second received to link" ::= { sysLinkEntry 7 } sysLkTxMaxRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Maximum cells per second transmitted from link" ::= { sysLinkEntry 8 } sysLkRxMaxRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Maximum cells per second received to link" ::= { sysLinkEntry 9 } sysLkResetStats OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(2) to reset the link statistics" ::= { sysLinkEntry 10 } sysLkClockSrc OBJECT-TYPE SYNTAX INTEGER { normal(1), low-quality(2), high-quality(3), loop-timed(4), local(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies where the link obtains its clock" ::= { sysLinkEntry 11 } sysLkResetResrc OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(2) to reset the link resources" ::= { sysLinkEntry 12 } sysLKEgCLPThreshold OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit CLP1 threshold" DEFVAL { 0 } ::= { sysLinkEntry 13 } sysLKIgCLPThreshold OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Receive CLP1 threshold" DEFVAL { 0 } ::= { sysLinkEntry 14 } sysLKEgEFCIThreshold OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit EFCI threshold" DEFVAL { 0 } ::= { sysLinkEntry 15 } sysLKIgEFCIThreshold OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Receive EFCI threshold" DEFVAL { 0 } ::= { sysLinkEntry 16 } sysLKEgLogBuffer OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit logic buffer size" DEFVAL { 1 } ::= { sysLinkEntry 17 } sysLKIgLogBuffer OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Receive logic buffer size" DEFVAL { 1 } ::= { sysLinkEntry 18 } sysLKEgFIFODepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmit FIFO Depth" ::= { sysLinkEntry 19 } sysLKIgFIFODepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive FIFO Depth" ::= { sysLinkEntry 20 } sysLKEgMemBlockId OBJECT-TYPE SYNTAX INTEGER { mem-4k(4), mem-16k(16), mem-64k(63) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmit Memory Block ID" ::= { sysLinkEntry 21 } sysLKIgMemBlockId OBJECT-TYPE SYNTAX INTEGER { mem-4k(4), mem-16k(16), mem-64k(63) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Memory Block ID" ::= { sysLinkEntry 22 } sysDbTable OBJECT-TYPE SYNTAX SEQUENCE OF SysDbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about the internal buffer pool on the slot controller." ::= { dv2System 16 } sysDbEntry OBJECT-TYPE SYNTAX SysDbEntry ACCESS not-accessible STATUS mandatory INDEX { sysDbIndex } ::= { sysDbTable 1 } SysDbEntry ::= SEQUENCE { sysDbIndex INTEGER, sysDbSize INTEGER, sysDbInitial INTEGER, sysDbCurrent INTEGER } sysDbIndex OBJECT-TYPE SYNTAX INTEGER (0..10) ACCESS read-only STATUS mandatory DESCRIPTION "Buffer class number" ::= { sysDbEntry 1 } sysDbSize OBJECT-TYPE SYNTAX INTEGER { buff16(16), buff128(128), buff368(368), buff1600(1600), cells(48), signal-quota(1), ip-quota(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Five classes of buffers are used:- 16, 128, 368 and 1600 bytes plus 48 bytes for cells." ::= { sysDbEntry 2 } sysDbInitial OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the initial number of buffers available." ::= { sysDbEntry 3 } sysDbCurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current number of buffers available." ::= { sysDbEntry 4 } sysAuthenticateTable OBJECT-TYPE SYNTAX SEQUENCE OF SysAuthenticateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing all the authentication tuples for this agent." ::= { dv2System 17 } sysAuthenticateEntry OBJECT-TYPE SYNTAX SysAuthenticateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An authentication tuple. A PDU from the ipaddress specified that contains the community, will have access to this MIB." INDEX { sysAuIndex } ::= { sysAuthenticateTable 1 } SysAuthenticateEntry ::= SEQUENCE { sysAuIndex INTEGER, sysAuIpaddress IpAddress, sysAuCommunity DisplayString, sysAuAccess INTEGER, sysAuSendTraps INTEGER, sysAuValidity INTEGER } sysAuIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Index, identifying each entry in the authentication table." ::= { sysAuthenticateEntry 1 } sysAuIpaddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network address of the manager that has authentication access to this agent." ::= { sysAuthenticateEntry 2 } sysAuCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The SNMP community for which the ipaddress is authenticated." ::= { sysAuthenticateEntry 3 } sysAuAccess OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Access permission for this ipaddress/community tuple. Write access is required for performing SNMP sets." ::= { sysAuthenticateEntry 4 } sysAuSendTraps OBJECT-TYPE SYNTAX INTEGER { send-all(1), send-none(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to send-none(2) to prevent traps being sent to this host." ::= { sysAuthenticateEntry 5 } sysAuValidity OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to invalid(2) to delete this row." ::= { sysAuthenticateEntry 6 } ------------------------------------------------------------------------ -- Continuation of Base System Group sysLastTrapMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..70)) ACCESS read-only STATUS mandatory DESCRIPTION "This is used to contain the last trap string sent." ::= { dv2System 18 } sysConfigChanged OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates that a new file is available. This should not be set by the user." ::= { dv2System 19 } sysConfigFile OBJECT-TYPE SYNTAX INTEGER { no-action(1), read(2), write(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to read(2) to re-read the file. Set to write(3) to write the existing configuration to ." ::= { dv2System 20 } sysCompileTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Date and time of link in the form dd Mon yyyy hh:mm:ss. For example:- 15 Aug 1994 10:12:21" ::= { dv2System 21 } slotNumber OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Slot Number" ::= { dv2System 22} -- Y2K change : use DateAndTime convention sysLastResetTimeM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "Date and time board was last reset." ::= { dv2System 23 } -- Y2K change : use DateAndTime convention sysCurrentTimeM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-write STATUS mandatory DESCRIPTION "Current date and time in the form dd Mon yyyy hh:mm:ss. For example:- 15 Aug 1994 10:12:21" ::= { dv2System 24 } -- new variable #10, #13 limTypeStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), compatible(2), not-compatible(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes whether the lim and the DOC card are compatible." DEFVAL { unknown } ::= { dv2System 25 } --___________________________________________________________________________ -- The dv2slot0 group slot0IntIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of SLOT 0 for ATM interface." ::= { dv2Slot0 1 } slot0XpInUse OBJECT-TYPE SYNTAX INTEGER { unknown(3), main-in-service(1), standby-in-service(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current Switch Fabric in Service" DEFVAL { unknown } ::= { dv2Slot0 2 } slot0XpToUse OBJECT-TYPE SYNTAX INTEGER { auto(3), main(1), standby(2), not-applicable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the switch fabric card you want the switch to use." DEFVAL { auto } ::= { dv2Slot0 3 } slot0StandbyXp OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable standby switch fabric." ::= { dv2Slot0 4 } slot0PsuTable OBJECT-TYPE SYNTAX SEQUENCE OF Slot0PsuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dv2Slot0 5 } slot0PsuEntry OBJECT-TYPE SYNTAX Slot0PsuEntry ACCESS not-accessible STATUS mandatory INDEX { slot0PsuIndex } ::= { slot0PsuTable 1 } Slot0PsuEntry ::= SEQUENCE { slot0PsuIndex INTEGER, slot0PsuFault INTEGER, slot0PsuTestFault INTEGER, slot0PsuVoltage INTEGER, slot0PsuTemp INTEGER, slot0PsuFanASpeed INTEGER, slot0PsuFanBSpeed INTEGER, slot0PsuFanCSpeed INTEGER, slot0PsuReset INTEGER, slot0PsuType INTEGER, slot0PsuFanFail INTEGER, slot0PsuTooHot INTEGER, slot0PsuFrontTooHot INTEGER } slot0PsuIndex OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Power-supply number." ::= { slot0PsuEntry 1 } slot0PsuFault OBJECT-TYPE SYNTAX INTEGER { absent(3), -- This power supply is not fitted. ok(1), -- This power supply is OK. fault(2) -- This power supply has a fault. Temperature or fan speed. } ACCESS read-only STATUS mandatory DESCRIPTION "If fault(2) then this indicates a fault condition in the power-supply." ::= { slot0PsuEntry 2 } slot0PsuTestFault OBJECT-TYPE SYNTAX INTEGER { -- Fix test fault status'; they were previously reversed. A value of 1 in -- this field indicates psu okay, a value of 2 indicates a test fault. -- yes(1), Test on this power supply is in progress. -- no(2) Test not in progress. no(1), -- Test not in progress. yes(2), -- Test on this power supply is in progress. not-applicable(3) -- TestFault not applicable } ACCESS read-only STATUS mandatory DESCRIPTION "If set to yes(1) the control button on the PSU module has been set to test fault mode." ::= { slot0PsuEntry 3 } slot0PsuVoltage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a the voltage generated by the power-supply in millivolts." ::= { slot0PsuEntry 4 } slot0PsuTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the power-supply module in degrees celsius." ::= { slot0PsuEntry 5 } slot0PsuFanASpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the rotation speed of FAN A in RPM." ::= { slot0PsuEntry 6 } slot0PsuFanBSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the rotation speed of FAN B in RPM." ::= { slot0PsuEntry 7 } slot0PsuFanCSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the rotation speed of FAN C in RPM." ::= { slot0PsuEntry 8 } slot0PsuReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), not-applicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to yes(2) then the power-supply module is returned to its initial state." ::= { slot0PsuEntry 9 } slot0PsuType OBJECT-TYPE SYNTAX INTEGER { v1-ATM-SWITCH(1), v2-ATM-SWITCH(2), v3-ATM-SWITCH(3), v4-ATM-SWITCH(4), v5-ATM-SWITCH(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Shows the type of PSU fitted into switch." ::= { slot0PsuEntry 10 } slot0PsuFanFail OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(2) if the fan fails." ::= { slot0PsuEntry 11 } slot0PsuTooHot OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), not-applicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(2) if the PSU is too hot" ::= { slot0PsuEntry 12 } slot0PsuFrontTooHot OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), not-applicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(2) if the Front is too hot" ::= { slot0PsuEntry 13 } --___________________________________________________________________________ -- The Physical Layout table slot0PhyTable OBJECT-TYPE SYNTAX SEQUENCE OF Slot0PhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table summarises the hardware installed in the switch." ::= { dv2Slot0 6 } slot0PhyEntry OBJECT-TYPE SYNTAX Slot0PhyEntry ACCESS not-accessible STATUS mandatory INDEX { slot0PhySlotNo } ::= { slot0PhyTable 1 } Slot0PhyEntry ::= SEQUENCE { slot0PhySlotNo INTEGER, slot0PhyName DisplayString, slot0PhyType INTEGER, slot0PhyDlim INTEGER, slot0PhySwVer DisplayString, slot0PhyState INTEGER, slot0PhyReset INTEGER, slot0PhyReqState INTEGER, -- Y2K change : deprecated -- slot0PhyChangeTime -- DateTimeString, slot0PhyStateChange INTEGER, slot0PhyLinkedSlot INTEGER, slot0PhyLink0State INTEGER, slot0PhyLink1State INTEGER, slot0PhyLink2State INTEGER, slot0PhyLink3State INTEGER, slot0PhySlotSerNo DisplayString, slot0PhySlotHwVerNo DisplayString, slot0PhyDocSerNo DisplayString, slot0PhyDocHwVerNo DisplayString, slot0PhyMacAddress PhysAddress, -- Y2K change : added, use DateAndTime convention slot0PhyChangeTimeM2 DateAndTime, -- #10 new variables slot0PhyLstChngLnkNum INTEGER, slot0PhyLstChngPrevLnkStat INTEGER } slot0PhySlotNo OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This is the slot number in the switch." ::= { slot0PhyEntry 1 } slot0PhyName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is a mnemonic name for the slot." ::= { slot0PhyEntry 2 } slot0PhyType OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- 0x01 dxdoc(128), -- 0x80 qedoc(129), -- 0x81 vcdoc(130), -- 0x82 -- lfdoc(131), 0x83 -- hfdoc(132), 0x84 cp(133), -- 0x85 cl(134), -- 0x86 cs(135), -- 0x87 hp(136), -- 0x88 hl(137), -- 0x89 hs(138), -- 0x8a ce(139), -- 0x8b ve(140), -- 0x8c chfrc(141), -- 0x8d eth(142), -- 0x8e frac(143), -- 0x8f trdoc(144), -- 0x90 sce(145), -- 0x91 dv2ap(146), -- 0x92 dv2as(147), -- 0x93 vsm(148), -- 0x94 ipas(149), -- 0x95 ipap(150) -- 0x96 } ACCESS read-only STATUS mandatory DESCRIPTION "This enumerated type defines the type of card fitted in the slot." ::= { slot0PhyEntry 3 } slot0PhyDlim OBJECT-TYPE SYNTAX INTEGER { unknown(1), dx21(2), dx27(3), d2G703(4), d8G703(5), d34G703(6), dAUI(7), dlfLIM(8), dds1(9), dds3(10), dhssi(11), dsolim(12), ds3-2c(13), e3-2c(14), e1-dual(15), e1-quad(16), ds1-dual(17), ds1-quad(18), jpeg(19), j2-dual(20), j2-quad(21), vh320(22), si-dual(23), si-quad(24), delim(25), mpg2v(26), qtlim(27) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the type of DLIM fitted to the slot." ::= { slot0PhyEntry 4 } slot0PhySwVer OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Version of the software running on this slot controller." ::= { slot0PhyEntry 5 } slot0PhyState OBJECT-TYPE SYNTAX INTEGER { absent(1), -- no card fitted bootmode(2), active(3), shutdown(4), shadow(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the slot, -(1) indicates no card fitted." ::= { slot0PhyEntry 6 } slot0PhyReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to yes(2) will reset the slot - use with care" ::= { slot0PhyEntry 7 } slot0PhyReqState OBJECT-TYPE SYNTAX INTEGER { normal(1), shutdown(2), main(3), shadow(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to shutdown(2) will stop the slot running. The slot should only be set to main(3) or shadow(4) if the slot is operating in hardware redundant mode with an adjacent slot." ::= { slot0PhyEntry 8 } -- Y2K change : deprecated --slot0PhyChangeTime OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Last date and time link changed state." -- ::= { slot0PhyEntry 9 } slot0PhyStateChange OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates link has changed state." ::= { slot0PhyEntry 10 } slot0PhyLinkedSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This is used in hardware redundancy mode. If set to 0 then there is no associated slot. Otherwise the value is the slot number that will be used if this slot fails." ::= { slot0PhyEntry 11 } slot0PhyLink0State OBJECT-TYPE SYNTAX INTEGER { stop(4), up(1), down(2), off(3), reset(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This contains link 0 status." ::= { slot0PhyEntry 12 } slot0PhyLink1State OBJECT-TYPE SYNTAX INTEGER { stop(4), up(1), down(2), off(3), reset(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This contains link 1 status." ::= { slot0PhyEntry 13 } slot0PhyLink2State OBJECT-TYPE SYNTAX INTEGER { stop(4), up(1), down(2), off(3), reset(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This contains link 2 status." ::= { slot0PhyEntry 14 } slot0PhyLink3State OBJECT-TYPE SYNTAX INTEGER { stop(4), up(1), down(2), off(3), reset(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This contains link 3 status." ::= { slot0PhyEntry 15 } slot0PhySlotSerNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Serial number of the slot controller." ::= { slot0PhyEntry 16 } slot0PhySlotHwVerNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Hardware version number and revision of the slot controller." ::= { slot0PhyEntry 17 } slot0PhyDocSerNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Serial number of the DOC." ::= { slot0PhyEntry 18 } slot0PhyDocHwVerNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Hardware version number and revision of the DOC." ::= { slot0PhyEntry 19 } slot0PhyMacAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "MAC address of the slot." ::= { slot0PhyEntry 20 } -- Y2K change : use DateAndTime convention slot0PhyChangeTimeM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "Last date and time link changed state." ::= { slot0PhyEntry 21 } -- New variable to identify the effected link, #10, #12, #13 slot0PhyLstChngLnkNum OBJECT-TYPE SYNTAX INTEGER { link-0(1), link-1(2), link-2(3), link-3(4), none(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Holds the link number of the last link status to change." DEFVAL { none } ::= { slot0PhyEntry 22 } -- New variable for previous link state, #10, #13 slot0PhyLstChngPrevLnkStat OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), off(3), stop(4), reset(5), none(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Holds the previous link state of the last link number whose status changed." DEFVAL { none } ::= { slot0PhyEntry 23 } -- slot0LastTrapMessage Deprecated -- -- slot0LastTrapMessage OBJECT-TYPE -- SYNTAX deprecated -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "This is used to contain the last trap string sent." -- ::= { dv2Slot0 7 } slot0MaxUpSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of slots that have been up." ::= { dv2Slot0 7 } slot0CurrentUpSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of slots currently up." ::= { dv2Slot0 8 } slot0IsStandbySlot0 OBJECT-TYPE SYNTAX INTEGER { unknown(5), not-applicable(4), no(1), yes(2), not-ready(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(2) if there is a redundant slot 0 available." ::= { dv2Slot0 9 } slot0TftpToStandby OBJECT-TYPE SYNTAX INTEGER { yes(2), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to stop files being transferred to the out of service slot0 automatically when they are changed." ::= { dv2Slot0 10 } slot0MibBroadcast OBJECT-TYPE SYNTAX INTEGER { none(1), snmp-Authentication(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Broadcasts particular tables to all other slots." ::= { dv2Slot0 11 } --slot0SwitchStatus OBJECT-TYPE -- SYNTAX INTEGER { -- s00(1), -- s01(2), -- s10(3), -- s11(4) -- } -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Shows the status of the PSU control switches." -- ::= { dv2Slot0 12 } -- --slot0SetAlarm OBJECT-TYPE -- SYNTAX INTEGER { -- none(1), -- minor-alarm(2), -- major-alarm(3), -- critical-alarm(4) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Set the alarm status of the PSU." -- ::= { dv2Slot0 13 } slot0Address OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "The E.164 address of the switch." ::= { dv2Slot0 14 } slot0InUse OBJECT-TYPE SYNTAX INTEGER { unknown(5), main-in-service(1), standby-in-service(2), main-out-of-service(3), standby-out-of-service(4), main-disabled(6), standby-disabled(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The Slot 0 card Redundancy Status." ::= { dv2Slot0 15 } slot0ToUse OBJECT-TYPE SYNTAX INTEGER { auto(3), main(1), standby(2), not-applicable(4), disable(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Slot 0 card you want the switch to use." ::= { dv2Slot0 16 } slot0redmode OBJECT-TYPE SYNTAX INTEGER { unknown(4), non-redundant(1), basic-redundancy(2), enhanced-redundancy(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Slot 0 card Redundancy mode." ::= { dv2Slot0 17 } slot0IntIPMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Mask for Internal Subnet. To reconfigure, Save new configuration and perform then warm Start." ::= { dv2Slot0 18 } slot0SwitchId OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Switch ID for this Apex node" DEFVAL { 0 } ::= { dv2Slot0 19 } ntms0doc OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Signifies that the S0DOC is capable of communicating with an NTM" DEFVAL { no } ::= { dv2Slot0 20 } slot0LecsPrefix OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "The NSAP network prefix for LECS." ::= { dv2Slot0 21 } slot0LecsESI OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "The NSAP ESI for LECS." ::= { dv2Slot0 22 } --___________________________________________________________________________ -- clock sourcing group - dv2Clocks -- to be depricated clksTxTimingRef OBJECT-TYPE SYNTAX INTEGER { system-timing-reference(1), local-link0(2), local-link1(3), local-oscillator(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit Timing Reference" ::= { dv2Clocks 1 } clksSysRefSlotNum OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "System Timing Reference Slot Number" ::= { dv2Clocks 2 } clksSysRefLinkNum OBJECT-TYPE SYNTAX INTEGER { link0(1), link1(2), none(3) } ACCESS read-write STATUS mandatory DESCRIPTION "System Timing Reference Link Number" ::= { dv2Clocks 3 } clksSysRefError OBJECT-TYPE SYNTAX INTEGER { slot0(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), none(17) } ACCESS read-only STATUS mandatory DESCRIPTION "System Timing Error" ::= { dv2Clocks 4 } --___________________________________________________________________________ -- clock sourcing group - dv2SystemClocks -- autoRevert OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Automatic Revert after Timing Source Recovery" DEFVAL { no } ::= { dv2SystemClocks 1 } revertTimer OBJECT-TYPE SYNTAX INTEGER (5..60) ACCESS read-write STATUS mandatory DESCRIPTION "Revert Timer in Seconds" DEFVAL { 30 } ::= { dv2SystemClocks 2 } forceRevert OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Force Immediate Revert" DEFVAL { no } ::= { dv2SystemClocks 3 } forceSecondary OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Force Secondary Source Timing" DEFVAL { no } ::= { dv2SystemClocks 4 } alarmStatus OBJECT-TYPE SYNTAX INTEGER { clear(1), minor(2), major(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Timing Alarm Status" DEFVAL { clear } ::= { dv2SystemClocks 5 } inService OBJECT-TYPE SYNTAX INTEGER { none(1), pri-line(2), pri-internal(3), pri-stratum3(4), pri-external(5), sec-line(6), sec-internal(7), sec-stratum3(8), sec-external(9), pri-plcp(10), sec-plcp(11) } ACCESS read-only STATUS mandatory DESCRIPTION "Card in Service" DEFVAL { pri-internal } ::= { dv2SystemClocks 6 } primaryClockTable OBJECT-TYPE SYNTAX SEQUENCE OF PrimaryEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 7 } primaryEntry OBJECT-TYPE SYNTAX PrimaryEntry ACCESS not-accessible STATUS mandatory INDEX { pIndex } ::= { primaryClockTable 1 } PrimaryEntry ::= SEQUENCE { pIndex INTEGER, pValidSource INTEGER, pOnOffLine INTEGER, pSlotNumber INTEGER, pSysRefSelect INTEGER, pActiveTimingSource INTEGER, pInputLineOk INTEGER, pSysRefTimingOk INTEGER } pIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { primaryEntry 1 } pValidSource OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Valid Timing Source" DEFVAL { no } ::= { primaryEntry 2 } pOnOffLine OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "On / Off line Toggle" DEFVAL { off } ::= { primaryEntry 3 } pSlotNumber OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Primary Source Slot Number" DEFVAL { 0 } ::= { primaryEntry 4 } pSysRefSelect OBJECT-TYPE SYNTAX INTEGER { link0(1), link1(2), link2(3), link3(4), local-oscillator(5) } ACCESS read-write STATUS mandatory DESCRIPTION "System Reference Select" DEFVAL { local-oscillator } ::= { primaryEntry 5 } pActiveTimingSource OBJECT-TYPE SYNTAX INTEGER { line(1), internal(2), plcp(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Active Timing Reference" DEFVAL { internal } ::= { primaryEntry 6 } pInputLineOk OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Input Line OK" DEFVAL { no } ::= { primaryEntry 7 } pSysRefTimingOk OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "System Reference Timing OK" DEFVAL { no } ::= { primaryEntry 8 } secondaryClockTable OBJECT-TYPE SYNTAX SEQUENCE OF SecondaryEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 8 } secondaryEntry OBJECT-TYPE SYNTAX SecondaryEntry ACCESS not-accessible STATUS mandatory INDEX { sIndex } ::= { secondaryClockTable 1 } SecondaryEntry ::= SEQUENCE { sIndex INTEGER, sValidSource INTEGER, sOnOffLine INTEGER, sSlotNumber INTEGER, sSysRefSelect INTEGER, sActiveTimingSource INTEGER, sInputLineOk INTEGER, sSysRefTimingOk INTEGER } sIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { secondaryEntry 1 } sValidSource OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Valid Timing Source" DEFVAL { no } ::= { secondaryEntry 2 } sOnOffLine OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "On / Off line Toggle" DEFVAL { off } ::= { secondaryEntry 3 } sSlotNumber OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Secondary Source Slot Number" DEFVAL { 0 } ::= { secondaryEntry 4 } sSysRefSelect OBJECT-TYPE SYNTAX INTEGER { link0(1), link1(2), link2(3), link3(4), local-oscillator(5) } ACCESS read-write STATUS mandatory DESCRIPTION "System Reference Select" DEFVAL { local-oscillator } ::= { secondaryEntry 5 } sActiveTimingSource OBJECT-TYPE SYNTAX INTEGER { line(1), internal(2), plcp(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Active Timing Reference" DEFVAL { internal } ::= { secondaryEntry 6 } sInputLineOk OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Input Line OK" DEFVAL { no } ::= { secondaryEntry 7 } sSysRefTimingOk OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "System Reference Timing OK" DEFVAL { no } ::= { secondaryEntry 8 } str3Configured OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "CAT Card present" DEFVAL { no } ::= { dv2SystemClocks 9 } pCATcontrolTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATcontrolEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 10 } pCATcontrolEntry OBJECT-TYPE SYNTAX PCATcontrolEntry ACCESS not-accessible STATUS mandatory INDEX { pccIndex } ::= { pCATcontrolTable 1 } PCATcontrolEntry ::= SEQUENCE { pccIndex INTEGER, pccatlimtype INTEGER, pccatsendcode INTEGER, pccatactivate INTEGER, pccatsendconfig INTEGER, pccatbytestransferred INTEGER, pccatfilexferstat INTEGER, pcatforcesecext INTEGER, pcatforcesecstr3 INTEGER, pcatcommand INTEGER, pcatplaceholder1 INTEGER, pcatplaceholder2 INTEGER, pcconoffline INTEGER } pccIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATcontrolEntry 1 } pccatlimtype OBJECT-TYPE SYNTAX INTEGER { none(1), t1(2), e1(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of CAT LIM" DEFVAL { t1 } ::= { pCATcontrolEntry 2 } pccatsendcode OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Send code to NTM LIM" DEFVAL { no } ::= { pCATcontrolEntry 3 } pccatactivate OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Activate NTM Code" DEFVAL { no } ::= { pCATcontrolEntry 4 } pccatsendconfig OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Send Configuration to NTM LIM" DEFVAL { no } ::= { pCATcontrolEntry 5 } pccatbytestransferred OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Code bytes transferred to NTM LIM" ::= { pCATcontrolEntry 6 } pccatfilexferstat OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7) } ACCESS read-only STATUS mandatory DESCRIPTION "File transfer status as reported by Slot 0" ::= { pCATcontrolEntry 7 } pcatforcesecext OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Force the secondary external" DEFVAL { no } ::= { pCATcontrolEntry 8 } pcatforcesecstr3 OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Force the secondary stratum 3" DEFVAL { no } ::= { pCATcontrolEntry 9 } pcatcommand OBJECT-TYPE SYNTAX INTEGER { none(1), revert(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Internal Use" DEFVAL { none } ::= { pCATcontrolEntry 10 } pcatplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { pCATcontrolEntry 11 } pcatplaceholder2 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { pCATcontrolEntry 12 } pcconoffline OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Put NTM LIM on or offline" DEFVAL { offline } ::= { pCATcontrolEntry 13 } -- CAT Secondary Control sCATcontrolTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATcontrolEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 11 } sCATcontrolEntry OBJECT-TYPE SYNTAX SCATcontrolEntry ACCESS not-accessible STATUS mandatory INDEX { sccIndex } ::= { sCATcontrolTable 1 } SCATcontrolEntry ::= SEQUENCE { sccIndex INTEGER, sccatlimtype INTEGER, sccatsendcode INTEGER, sccatactivate INTEGER, sccatsendconfig INTEGER, sccatbytestransferred INTEGER, sccatfilexferstat INTEGER, scatcommand INTEGER, scatplaceholder1 INTEGER, scatplaceholder2 INTEGER, scconoffline INTEGER } sccIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATcontrolEntry 1 } sccatlimtype OBJECT-TYPE SYNTAX INTEGER { none(1), t1(2), e1(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of NTM LIM" DEFVAL { t1 } ::= { sCATcontrolEntry 2 } sccatsendcode OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Download code to NTM LIM" DEFVAL { no } ::= { sCATcontrolEntry 3 } sccatactivate OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Activate NTM Code" DEFVAL { no } ::= { sCATcontrolEntry 4 } sccatsendconfig OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Download Configuration to NTM LIM" DEFVAL { no } ::= { sCATcontrolEntry 5 } sccatbytestransferred OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Code bytes transferred to NTM LIM" ::= { sCATcontrolEntry 6 } sccatfilexferstat OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7) } ACCESS read-only STATUS mandatory DESCRIPTION "File transfer status as reported by Slot 0" ::= { sCATcontrolEntry 7 } scatcommand OBJECT-TYPE SYNTAX INTEGER { none(1), revert(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Internal Use" DEFVAL { none } ::= { sCATcontrolEntry 8 } scatplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { sCATcontrolEntry 9 } scatplaceholder2 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { sCATcontrolEntry 10 } scconoffline OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Put NTM LIM on or offline" DEFVAL { offline } ::= { sCATcontrolEntry 11 } -- CAT Primary Status pCATstatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATstatusEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 12 } pCATstatusEntry OBJECT-TYPE SYNTAX PCATstatusEntry ACCESS not-accessible STATUS mandatory INDEX { pscIndex } ::= { pCATstatusTable 1 } PCATstatusEntry ::= SEQUENCE { pscIndex INTEGER, pscatlimtype INTEGER, psCATFFrevision DisplayString, psCATBootrevision DisplayString, psCATHWrevision INTEGER, pscatfilestatus INTEGER, psCATfilerevision DisplayString, pscatmode INTEGER, pscaterrorcode INTEGER, pscatplaceholder1 INTEGER, pscatplaceholder2 INTEGER } pscIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATstatusEntry 1 } pscatlimtype OBJECT-TYPE SYNTAX INTEGER { none(1), t1(2), e1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of NTM LIM detected" DEFVAL { none } ::= { pCATstatusEntry 2 } psCATFFrevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Code Revision" ::= { pCATstatusEntry 3 } psCATBootrevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Boot Revision" ::= { pCATstatusEntry 4 } pscatfilestatus OBJECT-TYPE SYNTAX INTEGER { na(1), not-present(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Flash file status" DEFVAL { na } ::= { pCATstatusEntry 5 } psCATfilerevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM file Revision" ::= { pCATstatusEntry 6 } psCATHWrevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Hardware Revision" ::= { pCATstatusEntry 7 } pscatmode OBJECT-TYPE SYNTAX INTEGER { no-card(3), boot(1), full-feature-offline(2), unknown(4), full-feature-in-dnld(5), boot-in-dnld(6), full-feature-online(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Operating Mode of NTM LIM" DEFVAL { no-card } ::= { pCATstatusEntry 8 } pscaterrorcode OBJECT-TYPE SYNTAX INTEGER { none(1), bad-config(3), no-code(4), no-config(5), download-ok(6), download-fail(7) } ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Error Code" DEFVAL { none } ::= { pCATstatusEntry 9 } pscatplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { pCATstatusEntry 10 } pscatplaceholder2 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { pCATstatusEntry 11 } -- CAT Secondary Status sCATstatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATstatusEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 13 } sCATstatusEntry OBJECT-TYPE SYNTAX SCATstatusEntry ACCESS not-accessible STATUS mandatory INDEX { sscIndex } ::= { sCATstatusTable 1 } SCATstatusEntry ::= SEQUENCE { sscIndex INTEGER, sscatlimtype INTEGER, ssCATFFrevision DisplayString, ssCATBootrevision DisplayString, sscatfilestatus INTEGER, ssCATfilerevision DisplayString, ssCATHWrevision INTEGER, sscatmode INTEGER, sscaterrorcode INTEGER, sscatplaceholder1 INTEGER, sscatplaceholder2 INTEGER } sscIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATstatusEntry 1 } sscatlimtype OBJECT-TYPE SYNTAX INTEGER { none(1), t1(2), e1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of NTM LIM" DEFVAL { none } ::= { sCATstatusEntry 2 } ssCATFFrevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Code Revision" ::= { sCATstatusEntry 3 } ssCATBootrevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Boot Revision" ::= { sCATstatusEntry 4 } sscatfilestatus OBJECT-TYPE SYNTAX INTEGER { na(1), not-present(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Flash file status" DEFVAL { na } ::= { sCATstatusEntry 5 } ssCATfilerevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM file Revision" ::= { sCATstatusEntry 6 } ssCATHWrevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Hardware Revision" ::= { sCATstatusEntry 7 } sscatmode OBJECT-TYPE SYNTAX INTEGER { no-card(3), boot(1), full-feature-offline(2), unknown(4), full-feature-in-dnld(5), boot-in-dnld(6), full-feature-online(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Operating mode of NTM LIM" DEFVAL { no-card } ::= { sCATstatusEntry 8 } sscaterrorcode OBJECT-TYPE SYNTAX INTEGER { none(1), no-cat(2), bad-config(3), no-code(4), no-config(5), download-ok(6), download-fail(7) } ACCESS read-only STATUS mandatory DESCRIPTION "NTM LIM Error Code" DEFVAL { none } ::= { sCATstatusEntry 9 } sscatplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { sCATstatusEntry 10 } sscatplaceholder2 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Placeholder for future MIB changes" DEFVAL { na } ::= { sCATstatusEntry 11 } -- CAT Primary Stratum 3 Config pCATStratum3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATStratum3ConfigEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 14 } pCATStratum3ConfigEntry OBJECT-TYPE SYNTAX PCATStratum3ConfigEntry ACCESS not-accessible STATUS mandatory INDEX { ps3cIndex } ::= { pCATStratum3ConfigTable 1 } PCATStratum3ConfigEntry ::= SEQUENCE { ps3cIndex INTEGER, pcatstr3listener INTEGER, pcatstr3oscillator INTEGER, pcatstr3forcesecondary INTEGER, pcatstr3reconfigure INTEGER } ps3cIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATStratum3ConfigEntry 1 } pcatstr3listener OBJECT-TYPE SYNTAX INTEGER { external(1), line(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures Stratum 3 Reference" DEFVAL { external } ::= { pCATStratum3ConfigEntry 2 } pcatstr3oscillator OBJECT-TYPE SYNTAX INTEGER { external-or-line(1), internal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures Stratum 3 Mode" DEFVAL { external-or-line } ::= { pCATStratum3ConfigEntry 3 } pcatstr3forcesecondary OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Disables Stratum 3 Driver on Primary NTM LIM only" DEFVAL { no } ::= { pCATStratum3ConfigEntry 4 } pcatstr3reconfigure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Re-configure Primary Stratum 3" DEFVAL { no } ::= { pCATStratum3ConfigEntry 5 } -- CAT Secondary Stratum 3 Config sCATStratum3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATStratum3ConfigEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 15 } sCATStratum3ConfigEntry OBJECT-TYPE SYNTAX SCATStratum3ConfigEntry ACCESS not-accessible STATUS mandatory INDEX { ss3cIndex } ::= { sCATStratum3ConfigTable 1 } SCATStratum3ConfigEntry ::= SEQUENCE { ss3cIndex INTEGER, scatstr3listener INTEGER, scatstr3oscillator INTEGER, scatstr3reconfigure INTEGER } ss3cIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATStratum3ConfigEntry 1 } scatstr3listener OBJECT-TYPE SYNTAX INTEGER { external(1), line(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures Stratum 3 Reference" DEFVAL { external } ::= { sCATStratum3ConfigEntry 2 } scatstr3oscillator OBJECT-TYPE SYNTAX INTEGER { external-or-line(1), internal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures Stratum 3 Mode" DEFVAL { external-or-line } ::= { sCATStratum3ConfigEntry 3 } scatstr3reconfigure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Re-configure Secondary Stratum 3" DEFVAL { no } ::= { sCATStratum3ConfigEntry 4 } -- CAT Primary Stratum 3 Status pCATStratum3StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATStratum3StatusEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 16 } pCATStratum3StatusEntry OBJECT-TYPE SYNTAX PCATStratum3StatusEntry ACCESS not-accessible STATUS mandatory INDEX { ps3sIndex } ::= { pCATStratum3StatusTable 1 } PCATStratum3StatusEntry ::= SEQUENCE { ps3sIndex INTEGER, pcatstr3listenerstatus INTEGER, pcatstr3driverstatus INTEGER, pcatstr3oscstatus INTEGER } ps3sIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATStratum3StatusEntry 1 } pcatstr3listenerstatus OBJECT-TYPE SYNTAX INTEGER { listening-to-Primary(1), listening-to-Secondary(2), no-input(3) } ACCESS read-only STATUS mandatory DESCRIPTION "What the Stratum 3 is referencing to" DEFVAL { no-input } ::= { pCATStratum3StatusEntry 2 } pcatstr3driverstatus OBJECT-TYPE SYNTAX INTEGER { enabled-online(1), disabled-offline(2), fault(3) } ACCESS read-only STATUS mandatory DESCRIPTION "What the Stratum 3 output is driving" DEFVAL { fault } ::= { pCATStratum3StatusEntry 3 } pcatstr3oscstatus OBJECT-TYPE SYNTAX INTEGER { idle(1), acquisition-wide-band(2), locked-in-range(3), acquisition-narrow-band(4), holdover(5), internal(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Stratum 3 oscillator status" DEFVAL { idle } ::= { pCATStratum3StatusEntry 4 } -- CAT Secondary Stratum 3 Status sCATStratum3StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATStratum3StatusEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 17 } sCATStratum3StatusEntry OBJECT-TYPE SYNTAX SCATStratum3StatusEntry ACCESS not-accessible STATUS mandatory INDEX { ss3sIndex } ::= { sCATStratum3StatusTable 1 } SCATStratum3StatusEntry ::= SEQUENCE { ss3sIndex INTEGER, scatstr3listenerstatus INTEGER, scatstr3driverstatus INTEGER, scatstr3oscstatus INTEGER } ss3sIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATStratum3StatusEntry 1 } scatstr3listenerstatus OBJECT-TYPE SYNTAX INTEGER { listening-to-Primary(1), listening-to-secondary(2), no-input(3) } ACCESS read-only STATUS mandatory DESCRIPTION "What the Stratum 3 Listener is referencing" DEFVAL { no-input } ::= { sCATStratum3StatusEntry 2 } scatstr3driverstatus OBJECT-TYPE SYNTAX INTEGER { enabled-online(1), disabled-offline(2), fault(3) } ACCESS read-only STATUS mandatory DESCRIPTION "What the Stratum 3 output is driving" DEFVAL { fault } ::= { sCATStratum3StatusEntry 3 } scatstr3oscstatus OBJECT-TYPE SYNTAX INTEGER { idle(1), acquisition-wide-band(2), locked-in-range(3), acquisition-narrow-band(4), holdover(5), internal(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Stratum 3 oscillator status" DEFVAL { idle } ::= { sCATStratum3StatusEntry 4 } -- CAT Primary BITS configuration pCATBitsConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATBitsConfigEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 18 } pCATBitsConfigEntry OBJECT-TYPE SYNTAX PCATBitsConfigEntry ACCESS not-accessible STATUS mandatory INDEX { pbcIndex } ::= { pCATBitsConfigTable 1 } PCATBitsConfigEntry ::= SEQUENCE { pbcIndex INTEGER, pbcds1V2TxLineLn INTEGER, pbcplaceholder1 INTEGER, pbcV2FRMRMode INTEGER, pbcds1V2Coding INTEGER, pbcV2Lb INTEGER, pbcclrperf INTEGER, pbcreconfigure INTEGER } pbcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATBitsConfigEntry 1 } pbcds1V2TxLineLn OBJECT-TYPE SYNTAX INTEGER { feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Select transmit line length" DEFVAL { na } ::= { pCATBitsConfigEntry 2 } pbcplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Future Use" DEFVAL { na } ::= { pCATBitsConfigEntry 3 } pbcV2FRMRMode OBJECT-TYPE SYNTAX INTEGER { none(1), sf(2), esf(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DS1 Framing options." DEFVAL { none } ::= { pCATBitsConfigEntry 4 } pbcds1V2Coding OBJECT-TYPE SYNTAX INTEGER { na(3), ami(2), b8zs-t1(1) } ACCESS read-write STATUS mandatory DESCRIPTION "T1 Line Code" DEFVAL { na } ::= { pCATBitsConfigEntry 5 } pbcV2Lb OBJECT-TYPE SYNTAX INTEGER { none(1), line-loopback(2), local-loopback(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection DS1 " DEFVAL { none } ::= { pCATBitsConfigEntry 6 } pbcclrperf OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the Performance Counters" DEFVAL { no } ::= { pCATBitsConfigEntry 7 } pbcreconfigure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Re-configure Primary External" DEFVAL { no } ::= { pCATBitsConfigEntry 9 } -- CAT Secondary BITS configuration sCATBitsConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATBitsConfigEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 19 } sCATBitsConfigEntry OBJECT-TYPE SYNTAX SCATBitsConfigEntry ACCESS not-accessible STATUS mandatory INDEX { sbcIndex } ::= { sCATBitsConfigTable 1 } SCATBitsConfigEntry ::= SEQUENCE { sbcIndex INTEGER, sbcds1V2TxLineLn INTEGER, sbcplaceholder1 INTEGER, sbcV2FRMRMode INTEGER, sbcds1V2Coding INTEGER, sbcV2Lb INTEGER, sbcclrperf INTEGER, sbcreconfigure INTEGER } sbcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATBitsConfigEntry 1 } sbcds1V2TxLineLn OBJECT-TYPE SYNTAX INTEGER { feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Select transmit line length" DEFVAL { na } ::= { sCATBitsConfigEntry 2 } sbcplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Future Use" DEFVAL { na } ::= { sCATBitsConfigEntry 3 } sbcV2FRMRMode OBJECT-TYPE SYNTAX INTEGER { none(1), sf(2), esf(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DS1 Framing options." DEFVAL { none } ::= { sCATBitsConfigEntry 4 } sbcds1V2Coding OBJECT-TYPE SYNTAX INTEGER { na(3), ami(2), b8zs(1) } ACCESS read-write STATUS mandatory DESCRIPTION "T1 Line Coding" DEFVAL { na } ::= { sCATBitsConfigEntry 5 } sbcV2Lb OBJECT-TYPE SYNTAX INTEGER { none(1), line-loopback(2), local-loopback(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection" DEFVAL { none } ::= { sCATBitsConfigEntry 6 } sbcclrperf OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the Performance Counters" DEFVAL { no } ::= { sCATBitsConfigEntry 7 } sbcreconfigure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Re-configure Secondary External" DEFVAL { no } ::= { sCATBitsConfigEntry 8 } -- CAT Primary BITS Status pCATBitsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATBitsStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ds1/E1 Bits Status Table" ::= { dv2SystemClocks 20 } pCATBitsStatusEntry OBJECT-TYPE SYNTAX PCATBitsStatusEntry ACCESS not-accessible STATUS mandatory INDEX { pbsIndex } ::= { pCATBitsStatusTable 1 } PCATBitsStatusEntry ::= SEQUENCE { pbsIndex INTEGER, pbslineok INTEGER, pbsV2RxAIS INTEGER, pbsV2RxLOS INTEGER, pbsV2RxOOF INTEGER, pbsV2RxBER INTEGER, pbsV2RxOOFCnt INTEGER, pbsV2RxBERCnt INTEGER, pbsV2RxLOSCnt INTEGER, pbsV2LCVCnt INTEGER } pbsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATBitsStatusEntry 1 } pbslineok OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the line OK" ::= { pCATBitsStatusEntry 2 } pbsV2RxAIS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS(Blue)Alarm status." ::= { pCATBitsStatusEntry 3 } pbsV2RxLOS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS status." ::= { pCATBitsStatusEntry 4 } pbsV2RxOOF OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF status." ::= { pCATBitsStatusEntry 5 } pbsV2RxBER OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BER status." ::= { pCATBitsStatusEntry 6 } pbsV2RxOOFCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF count." ::= { pCATBitsStatusEntry 7 } pbsV2RxBERCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BEE count." ::= { pCATBitsStatusEntry 8 } pbsV2RxLOSCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS count." ::= { pCATBitsStatusEntry 9 } pbsV2LCVCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LCV count." ::= { pCATBitsStatusEntry 10 } -- CAT Secondary BITS Status sCATBitsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATBitsStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ds1/E1 Bits Status Table" ::= { dv2SystemClocks 21 } sCATBitsStatusEntry OBJECT-TYPE SYNTAX SCATBitsStatusEntry ACCESS not-accessible STATUS mandatory INDEX { sbsIndex } ::= { sCATBitsStatusTable 1 } SCATBitsStatusEntry ::= SEQUENCE { sbsIndex INTEGER, sbslineok INTEGER, sbsV2RxAIS INTEGER, sbsV2RxLOS INTEGER, sbsV2RxOOF INTEGER, sbsV2RxBER INTEGER, sbsV2RxOOFCnt INTEGER, sbsV2RxBERCnt INTEGER, sbsV2RxLOSCnt INTEGER, sbsV2LCVCnt INTEGER } sbsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATBitsStatusEntry 1 } sbslineok OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the line OK" ::= { sCATBitsStatusEntry 2 } sbsV2RxAIS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS(Blue)Alarm status." ::= { sCATBitsStatusEntry 3 } sbsV2RxLOS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS status." ::= { sCATBitsStatusEntry 4 } sbsV2RxOOF OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF status." ::= { sCATBitsStatusEntry 5 } sbsV2RxBER OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BER status." ::= { sCATBitsStatusEntry 6 } sbsV2RxOOFCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF Counts." ::= { sCATBitsStatusEntry 7 } sbsV2RxBERCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BEE Counts." ::= { sCATBitsStatusEntry 8 } sbsV2RxLOSCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1/E1 LOS Counts." ::= { sCATBitsStatusEntry 9 } sbsV2LCVCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS Counts." ::= { sCATBitsStatusEntry 10 } -- CAT Primary Derived T1 configuration pCATDerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATDerConfigEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 22 } pCATDerConfigEntry OBJECT-TYPE SYNTAX PCATDerConfigEntry ACCESS not-accessible STATUS mandatory INDEX { pdcIndex } ::= { pCATDerConfigTable 1 } PCATDerConfigEntry ::= SEQUENCE { pdcIndex INTEGER, pdcds1V2TxLineLn INTEGER, pdcplaceholder1 INTEGER, pdcV2FRMRMode INTEGER, pdcds1V2Coding INTEGER, pdcV2Lb INTEGER, pdcclrperf INTEGER, pdcreconfigure INTEGER } pdcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATDerConfigEntry 1 } pdcds1V2TxLineLn OBJECT-TYPE SYNTAX INTEGER { feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Select transmit line length" DEFVAL { na } ::= { pCATDerConfigEntry 2 } pdcplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Future Use" DEFVAL { na } ::= { pCATDerConfigEntry 3 } pdcV2FRMRMode OBJECT-TYPE SYNTAX INTEGER { none(1), sf(2), esf(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DS1 Framing options." DEFVAL { none } ::= { pCATDerConfigEntry 4 } pdcds1V2Coding OBJECT-TYPE SYNTAX INTEGER { na(3), ami(2), b8zs(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Line Code" DEFVAL { na } ::= { pCATDerConfigEntry 5 } pdcV2Lb OBJECT-TYPE SYNTAX INTEGER { none(1), line-lpbk(2), local-loopback(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection " ::= { pCATDerConfigEntry 6 } pdcclrperf OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the performance counters" DEFVAL { no } ::= { pCATDerConfigEntry 7 } pdcreconfigure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Re-configure Primary Line" DEFVAL { no } ::= { pCATDerConfigEntry 8 } -- CAT Secondary Derived T1 configuration sCATDerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATDerConfigEntry ACCESS not-accessible STATUS mandatory ::= { dv2SystemClocks 23 } sCATDerConfigEntry OBJECT-TYPE SYNTAX SCATDerConfigEntry ACCESS not-accessible STATUS mandatory INDEX { sdcIndex } ::= { sCATDerConfigTable 1 } SCATDerConfigEntry ::= SEQUENCE { sdcIndex INTEGER, sdcds1V2TxLineLn INTEGER, sdcplaceholder1 INTEGER, sdcV2FRMRMode INTEGER, sdcds1V2Coding INTEGER, sdcV2Lb INTEGER, sdcclrperf INTEGER, sdcreconfigure INTEGER } sdcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATDerConfigEntry 1 } sdcds1V2TxLineLn OBJECT-TYPE SYNTAX INTEGER { feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Select transmit line length" DEFVAL { na } ::= { sCATDerConfigEntry 2 } sdcplaceholder1 OBJECT-TYPE SYNTAX INTEGER { na(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Future Use" DEFVAL { na } ::= { sCATDerConfigEntry 3 } sdcV2FRMRMode OBJECT-TYPE SYNTAX INTEGER { none(1), sf(2), esf(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DS1 Framing options." DEFVAL { none } ::= { sCATDerConfigEntry 4 } sdcds1V2Coding OBJECT-TYPE SYNTAX INTEGER { na(3), ami(2), b8zs(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Line Coding" DEFVAL { na } ::= { sCATDerConfigEntry 5 } sdcV2Lb OBJECT-TYPE SYNTAX INTEGER { none(1), line-lpbk(2), local-loopback(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection DS1" ::= { sCATDerConfigEntry 6 } sdcclrperf OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the Performance Counters" DEFVAL { no } ::= { sCATDerConfigEntry 7 } sdcreconfigure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Re-configure Secondary Line" DEFVAL { no } ::= { sCATDerConfigEntry 8 } -- CAT Primary T1/E1 Derived Status pCATDerStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PCATDerStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ds1/E1 Derived Status Table" ::= { dv2SystemClocks 24 } pCATDerStatusEntry OBJECT-TYPE SYNTAX PCATDerStatusEntry ACCESS not-accessible STATUS mandatory INDEX { pdsIndex } ::= { pCATDerStatusTable 1 } PCATDerStatusEntry ::= SEQUENCE { pdsIndex INTEGER, pdslineok INTEGER, pdsV2TxReference INTEGER, pdsV2RxAIS INTEGER, pdsV2RxLOS INTEGER, pdsV2RxOOF INTEGER, pdsV2RxBER INTEGER, pdsV2RxOOFCnt INTEGER, pdsV2RxBERCnt INTEGER, pdsV2RxLOSCnt INTEGER , pdsV2LCVCnt INTEGER } pdsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { pCATDerStatusEntry 1 } pdslineok OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the line OK" ::= { pCATDerStatusEntry 2 } pdsV2TxReference OBJECT-TYPE SYNTAX INTEGER { no-input(1), primary-valid(2), secondary-valid(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmit Reference Status" ::= { pCATDerStatusEntry 3 } pdsV2RxAIS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS(Blue)Alarm status." ::= { pCATDerStatusEntry 4 } pdsV2RxLOS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS status." ::= { pCATDerStatusEntry 5 } pdsV2RxOOF OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF status." ::= { pCATDerStatusEntry 6 } pdsV2RxBER OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BER status." ::= { pCATDerStatusEntry 7 } pdsV2RxOOFCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF count." ::= { pCATDerStatusEntry 8 } pdsV2RxBERCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BEE count." ::= { pCATDerStatusEntry 9 } pdsV2RxLOSCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS count." ::= { pCATDerStatusEntry 10 } pdsV2LCVCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS count." ::= { pCATDerStatusEntry 11 } -- CAT Secondary Derived Status sCATDerStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SCATDerStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ds1/E1 Derived Status Table" ::= { dv2SystemClocks 25 } sCATDerStatusEntry OBJECT-TYPE SYNTAX SCATDerStatusEntry ACCESS not-accessible STATUS mandatory INDEX { sdsIndex } ::= { sCATDerStatusTable 1 } SCATDerStatusEntry ::= SEQUENCE { sdsIndex INTEGER, sdslineok INTEGER, sdsV2TxReference INTEGER, sdsV2RxAIS INTEGER, sdsV2RxLOS INTEGER, sdsV2RxOOF INTEGER, sdsV2RxBER INTEGER, sdsV2RxOOFCnt INTEGER, sdsV2RxBERCnt INTEGER, sdsV2RxLOSCnt INTEGER, sdsV2LCVCnt INTEGER } sdsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry Index" ::= { sCATDerStatusEntry 1 } sdslineok OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the line OK" ::= { sCATDerStatusEntry 2 } sdsV2TxReference OBJECT-TYPE SYNTAX INTEGER { no-input(1), primary-valid(2), secondary-valid(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmit Reference Status" ::= { sCATDerStatusEntry 3 } sdsV2RxAIS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS(Blue)Alarm status." ::= { sCATDerStatusEntry 4 } sdsV2RxLOS OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS status." ::= { sCATDerStatusEntry 5 } sdsV2RxOOF OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF status." ::= { sCATDerStatusEntry 6 } sdsV2RxBER OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), na(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BER status." ::= { sCATDerStatusEntry 7 } sdsV2RxOOFCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 OOF count." ::= { sCATDerStatusEntry 8 } sdsV2RxBERCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 BEE count." ::= { sCATDerStatusEntry 9 } sdsV2RxLOSCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 LOS count." ::= { sCATDerStatusEntry 10 } sdsV2LCVCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS1 AIS count." ::= { sCATDerStatusEntry 11 } -- New variable for clockAlarm trap #10, #13 sysClkAlarmErr OBJECT-TYPE SYNTAX INTEGER { none(1), sEClinePRI-ok(2), pRIlineSEC-ok(3), pRIlineSECoffline(4), pRIoscSECoffline(5), sEClinePRIoffline(6), sECoscPRIoffline(7), pRIlineSECline(8), pRIosc(9), sECosc(10), pRIoscSECosc(11), pRIoscSECline(12), pRIlineSECosc(13), no-valid-error(14) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the error type for the current clock alarm" DEFVAL { none } ::= { dv2SystemClocks 26 } --___________________________________________________________________________ -- The dv2 trace flags information group. traceIp OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Toggle for IP trace flag." ::= { dv2Trace 1 } traceUdp OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Toggle for UDP trace flag." ::= { dv2Trace 2 } traceTcp OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Toggle for TCP trace flag." ::= { dv2Trace 3 } traceSnmp OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Toggle for SNMP trace flag." ::= { dv2Trace 4 } traceCat OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Toggle for CAT trace flag." DEFVAL { no } ::= { dv2Trace 5 } --___________________________________________________________________________ -- The dv2 SLIP configuration. slipIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of SLIP line." ::= { dv2SlipLine 1 } slipMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Mask for SLIP line." ::= { dv2SlipLine 2 } slipRemoteIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of remote end of SLIP line." ::= { dv2SlipLine 3 } slipSpeed OBJECT-TYPE SYNTAX INTEGER { baud2400(1), baud4800(2), baud9600(3), baud19200(4), baud38400(5), baud57600(6), baud115200(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Baud rate of SLIP serial line." ::= { dv2SlipLine 4 } --___________________________________________________________________________ -- The VC DOC channel table config vcDocTable OBJECT-TYPE SYNTAX SEQUENCE OF VcDocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dv2VcDoc 1 } vcDocEntry OBJECT-TYPE SYNTAX VcDocEntry ACCESS not-accessible STATUS mandatory INDEX { vcDocLinkNo } ::= { vcDocTable 1 } VcDocEntry ::= SEQUENCE { vcDocLinkNo INTEGER, vcDocEnable INTEGER, vcDocVpi VirtualPathIdentifier, vcDocVci VirtualCircuitIdentifier, vcDocLinkSpeed INTEGER, vcDocCLines INTEGER, vcDocFifoSize INTEGER, vcDocLowWater INTEGER, vcDocHighWater INTEGER, vcDocTestMode INTEGER, vcDocTestVal Hex, vcDocPriority INTEGER, vcDocSuba INTEGER, vcDocSaddr INTEGER, vcDocClockFix INTEGER } vcDocLinkNo OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This is the target link number for the PVC." ::= { vcDocEntry 1 } vcDocEnable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to yes(1) enables the VCDOC channel." ::= { vcDocEntry 2 } vcDocVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VPI of the VC being used for cell transfers." ::= { vcDocEntry 3 } vcDocVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VCI of the VC being used for cell transfers." ::= { vcDocEntry 4 } vcDocLinkSpeed OBJECT-TYPE SYNTAX INTEGER { s32kbps(64), s64kbps(128), s128kbps(192), s256kbps(224), s512kbps(240), s1024kbps(248), s2048kbps(252) } ACCESS read-write STATUS mandatory DESCRIPTION "This sets the speed at which the link is to run." ::= { vcDocEntry 5 } vcDocCLines OBJECT-TYPE SYNTAX INTEGER { process(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This sets how control lines should be processed. If Ignore(2) is set then the port is always online." ::= { vcDocEntry 6 } vcDocFifoSize OBJECT-TYPE SYNTAX INTEGER (10..100) ACCESS read-write STATUS mandatory DESCRIPTION "This is the size of the software emulated FIFO." ::= { vcDocEntry 7 } vcDocLowWater OBJECT-TYPE SYNTAX INTEGER (0..50) ACCESS read-write STATUS mandatory DESCRIPTION "This is the point at which the transmit clock is switched to low frequency. This must be between 0 and FIFO Size/2" ::= { vcDocEntry 8 } vcDocHighWater OBJECT-TYPE SYNTAX INTEGER (5..100) ACCESS read-write STATUS mandatory DESCRIPTION "This is the point at which the transmit clock is switched to high frequency. This must be between FIFO size and FIFO Size/2" ::= { vcDocEntry 9 } vcDocTestMode OBJECT-TYPE SYNTAX INTEGER { normal(1), local-loop(2), cable-loop(3), remote-loop(4), pattern-send(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the type of self-test to perform with the VC DOC." ::= { vcDocEntry 10 } vcDocTestVal OBJECT-TYPE SYNTAX Hex ACCESS read-write STATUS mandatory DESCRIPTION "This is the test value to use when doing the pattern-send test." ::= { vcDocEntry 11 } vcDocPriority OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates that cells will be sent with the priority bit set." ::= { vcDocEntry 12 } vcDocSuba OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This is the target link number for the VC." ::= { vcDocEntry 13 } vcDocSaddr OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This is the target slot number for the VC." ::= { vcDocEntry 14 } vcDocClockFix OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If yes(2) then the clock will not be varied to maintain the size of the send FIFO." ::= { vcDocEntry 15 } --___________________________________________________________________________ -- The VC DOC channel table status vcStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a two row table that contains status information about the VCDOC." ::= { dv2VcDoc 2 } vcStatEntry OBJECT-TYPE SYNTAX VcStatEntry ACCESS not-accessible STATUS mandatory INDEX { vcStatPortNo } ::= { vcStatTable 1 } VcStatEntry ::= SEQUENCE { vcStatPortNo INTEGER, vcStatRxState INTEGER, vcStatTxState INTEGER, vcStatFifoCount INTEGER, vcStatOFlow INTEGER, vcStatUFlow INTEGER, vcStatReSync INTEGER, vcStatInvented INTEGER, vcStatRxCells Counter, vcStatTxCells Counter, vcStatRxSeqNo INTEGER, vcStatTxSeqNo INTEGER, vcStatLastError INTEGER, vcStatLastCompare INTEGER, vcStatTestErrors INTEGER } vcStatPortNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "This is the originating port number for the PVC" ::= { vcStatEntry 1 } vcStatRxState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether control lines are high at the other end of the link." ::= { vcStatEntry 2 } vcStatTxState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the local control lines are high." ::= { vcStatEntry 3 } vcStatFifoCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of cells waiting in the FIFO." ::= { vcStatEntry 4 } vcStatOFlow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Overflows." ::= { vcStatEntry 5 } vcStatUFlow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Underflows." ::= { vcStatEntry 6 } vcStatReSync OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times a sequence number resync has been required." ::= { vcStatEntry 7 } vcStatInvented OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of invented cells." ::= { vcStatEntry 8 } vcStatRxCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received cells count." ::= { vcStatEntry 9 } vcStatTxCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted cells count." ::= { vcStatEntry 10 } vcStatRxSeqNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive current sequence number." ::= { vcStatEntry 11 } vcStatTxSeqNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmit current sequence number." ::= { vcStatEntry 12 } vcStatLastError OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last error type." ::= { vcStatEntry 13 } vcStatLastCompare OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last compare value." ::= { vcStatEntry 14 } vcStatTestErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of test errors detected." ::= { vcStatEntry 15 } --___________________________________________________________________________ -- frame Relay Overall Status Table fRelayStatTable OBJECT-TYPE SYNTAX SEQUENCE OF FRelayStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the overall status information for the frame relay links." ::= { dv2FrRelay 1 } fRelayStatEntry OBJECT-TYPE SYNTAX FRelayStatEntry ACCESS not-accessible STATUS mandatory INDEX { fRelStatLinkNo } ::= { fRelayStatTable 1 } FRelayStatEntry ::= SEQUENCE { fRelStatLinkNo INTEGER, fRelStatLocSeq INTEGER, fRelStatLocAck INTEGER, fRelStatLocState INTEGER, fRelStatLocStartT INTEGER, fRelStatLocErrThr Counter, fRelStatLocMec Counter, fRelStatLocPoll Counter, fRelStatRemSeq INTEGER, fRelStatRemAck INTEGER, fRelStatRemState INTEGER, fRelStatRemStartT INTEGER, fRelStatRemErrThr Counter, fRelStatRemMec Counter, fRelStatRemPoll Counter } fRelStatLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Local send sequence." ::= { fRelayStatEntry 1 } fRelStatLocSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local send sequence." ::= { fRelayStatEntry 2 } fRelStatLocAck OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local ack sequence." ::= { fRelayStatEntry 3 } fRelStatLocState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Local state of link." ::= { fRelayStatEntry 4 } fRelStatLocStartT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local start time for poll." ::= { fRelayStatEntry 5 } fRelStatLocErrThr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Local error threshold Counter." ::= { fRelayStatEntry 6 } fRelStatLocMec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Local monitored events Counter." ::= { fRelayStatEntry 7 } fRelStatLocPoll OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Local poll Counter for DTE." ::= { fRelayStatEntry 8 } fRelStatRemSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote send sequence." ::= { fRelayStatEntry 9 } fRelStatRemAck OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote ack sequence." ::= { fRelayStatEntry 10 } fRelStatRemState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote state of link." ::= { fRelayStatEntry 11 } fRelStatRemStartT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote start time for poll." ::= { fRelayStatEntry 12 } fRelStatRemErrThr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Remote error threshold Counter." ::= { fRelayStatEntry 13 } fRelStatRemMec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Remote monitored events Counter." ::= { fRelayStatEntry 14 } fRelStatRemPoll OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Remote poll Counter for DTE." ::= { fRelayStatEntry 15 } --___________________________________________________________________________ -- frame Relay Overall Configuration Table fRelayConfTable OBJECT-TYPE SYNTAX SEQUENCE OF FRelayConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the overall configuration for the frame relay links." ::= { dv2FrRelay 2 } fRelayConfEntry OBJECT-TYPE SYNTAX FRelayConfEntry ACCESS not-accessible STATUS mandatory INDEX { fRelConfLinkNo } ::= { fRelayConfTable 1 } FRelayConfEntry ::= SEQUENCE { fRelConfLinkNo INTEGER, fRelConfLinkEnab INTEGER, fRelConfLinkMode INTEGER, fRelConfLinkSpeed INTEGER, fRelConfLinkCline INTEGER, fRelConfLinkType INTEGER, fRelConfN391 INTEGER, fRelConfN392 INTEGER, fRelConfN393 INTEGER, fRelConfT391 INTEGER, fRelConfT392 INTEGER } fRelConfLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Number of the link to configure." ::= { fRelayConfEntry 1 } fRelConfLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { fRelayConfEntry 2 } fRelConfLinkMode OBJECT-TYPE SYNTAX INTEGER { ansi(1), lmi(2), transport(3), dxi(4) } ACCESS read-write STATUS mandatory DESCRIPTION "frame mode." ::= { fRelayConfEntry 3 } fRelConfLinkSpeed OBJECT-TYPE SYNTAX INTEGER { s48kbps(48), s56kbps(77), s64kbps(100), s72kbps(117), s128kbps(177), s153k6bps(191), s256kbps(217), s307k2bps(223), s614k4bps(240), s819k2bps(244), s1Mbps(246), s2Mbps(251), s3Mbps(253), s5Mbps(254), s10Mbps(255) } ACCESS read-write STATUS mandatory DESCRIPTION "Local speed of link." ::= { fRelayConfEntry 4 } fRelConfLinkCline OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to disable control line processing." ::= { fRelayConfEntry 5 } fRelConfLinkType OBJECT-TYPE SYNTAX INTEGER { user(1), network(2), nni(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of link." ::= { fRelayConfEntry 6 } fRelConfN391 OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Poll count." ::= { fRelayConfEntry 7 } fRelConfN392 OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Threshold." ::= { fRelayConfEntry 8 } fRelConfN393 OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Monitored events." ::= { fRelayConfEntry 9 } fRelConfT391 OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "Poll period." ::= { fRelayConfEntry 10 } fRelConfT392 OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "Poll timeout." ::= { fRelayConfEntry 11 } --___________________________________________________________________________ -- The Frame Relay Link A Status (fra) fraPStatTable OBJECT-TYPE SYNTAX SEQUENCE OF FraPStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This shows the status of the frame relay PVCs for link 0." ::= { dv2FrRelay 3 } fraPStatEntry OBJECT-TYPE SYNTAX FraPStatEntry ACCESS not-accessible STATUS mandatory INDEX { fraPStatDlci } ::= { fraPStatTable 1 } FraPStatEntry ::= SEQUENCE { fraPStatDlci INTEGER, fraPStatRxBCnt Counter, fraPStatTxBCnt Counter, fraPStatRxFCnt Counter, fraPStatTxFCnt Counter, fraPStatRxBRate Gauge, fraPStatTxBRate Gauge, fraPStatRxFRate Gauge, fraPStatTxFRate Gauge, fraPStatDERxF Counter, fraPStatDisRxF Counter, fraPStatPvcStat Hex, fraPStatLinkState Hex, fraPStatLocSeq INTEGER, fraPStatLocAck INTEGER, fraPStatLocStat INTEGER, fraPStatLocStartT INTEGER, fraPStatLocErrThr Counter, fraPStatLocMec Counter, fraPStatLocPoll Counter, fraPStatRemSeq INTEGER, fraPStatRemAck INTEGER, fraPStatRemStat INTEGER, fraPStatRemStartT INTEGER, fraPStatRemErrThr Counter, fraPStatRemMec Counter, fraPStatRemPoll Counter, -- Y2K change : deprecated -- fraPStatLastChange -- DateTimeString, -- Y2K change : added, use DateAndTime convention fraPStatLastChangeM2 DateAndTime } fraPStatDlci OBJECT-TYPE SYNTAX INTEGER (16..511) ACCESS read-only STATUS mandatory DESCRIPTION "This is the DLCI for the PVC." ::= { fraPStatEntry 1 } fraPStatRxBCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received." ::= { fraPStatEntry 2 } fraPStatTxBCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes transmitted." ::= { fraPStatEntry 3 } fraPStatRxFCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames received." ::= { fraPStatEntry 4 } fraPStatTxFCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames transmitted." ::= { fraPStatEntry 5 } fraPStatRxBRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of bytes being received." ::= { fraPStatEntry 6 } fraPStatTxBRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of bytes being transmitted." ::= { fraPStatEntry 7 } fraPStatRxFRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of frames being received." ::= { fraPStatEntry 8 } fraPStatTxFRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of frames being transmitted." ::= { fraPStatEntry 9 } fraPStatDERxF OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of discarded eligible received frames." ::= { fraPStatEntry 10 } fraPStatDisRxF OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of discarded received frames." ::= { fraPStatEntry 11 } fraPStatPvcStat OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "The state of the PVC." ::= { fraPStatEntry 12 } fraPStatLinkState OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "The state of the link." ::= { fraPStatEntry 13 } fraPStatLocSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local send sequence." ::= { fraPStatEntry 14 } fraPStatLocAck OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local acknowledge number." ::= { fraPStatEntry 15 } fraPStatLocStat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local state of the link." ::= { fraPStatEntry 16 } fraPStatLocStartT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local start time for poll." ::= { fraPStatEntry 17 } fraPStatLocErrThr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The local error threshold Counter." ::= { fraPStatEntry 18 } fraPStatLocMec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The local monitored event Counter." ::= { fraPStatEntry 19 } fraPStatLocPoll OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The local poll Counter for DTE." ::= { fraPStatEntry 20 } fraPStatRemSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote send sequence." ::= { fraPStatEntry 21 } fraPStatRemAck OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote acknowledge number." ::= { fraPStatEntry 22 } fraPStatRemStat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote state of the link." ::= { fraPStatEntry 23 } fraPStatRemStartT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote start time for poll." ::= { fraPStatEntry 24 } fraPStatRemErrThr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The remote error threshold Counter." ::= { fraPStatEntry 25 } fraPStatRemMec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The remote monitored event Counter." ::= { fraPStatEntry 26 } fraPStatRemPoll OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The remote poll Counter for DTE." ::= { fraPStatEntry 27 } -- Y2K change : deprecated --fraPStatLastChange OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "The date and time of last state change." -- ::= { fraPStatEntry 28 } -- Y2K change : added, use DateAndTime convention fraPStatLastChangeM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "The date and time of last state change." ::= { fraPStatEntry 29 } --___________________________________________________________________________ -- The Frame Relay Link A Config (fra) fraPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FraPConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dv2FrRelay 4 } fraPConfigEntry OBJECT-TYPE SYNTAX FraPConfigEntry ACCESS not-accessible STATUS mandatory INDEX { fraPConfigDlci } ::= { fraPConfigTable 1 } FraPConfigEntry ::= SEQUENCE { fraPConfigDlci INTEGER, fraPConfigCir INTEGER, fraPConfigCommitB INTEGER, fraPConfigExcessB INTEGER, fraVci VirtualCircuitIdentifier, fraVpi VirtualPathIdentifier, fraPConfigPriority INTEGER, fraPConfigSuba INTEGER, fraPConfigSaddr INTEGER, fraPConfigValidity INTEGER, fraPConfigDxivpi INTEGER, fraPConfigDxivci INTEGER, fraPConfigDximode INTEGER } fraPConfigDlci OBJECT-TYPE SYNTAX INTEGER (16..511) ACCESS read-write STATUS mandatory DESCRIPTION "This is the DLCI for the PVC." ::= { fraPConfigEntry 1 } fraPConfigCir OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The committed information rate." ::= { fraPConfigEntry 2 } fraPConfigCommitB OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The committed burst rate." ::= { fraPConfigEntry 3 } fraPConfigExcessB OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The excess burst size." ::= { fraPConfigEntry 4 } fraVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VPI for this call." ::= { fraPConfigEntry 5 } fraVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VCI for the call." ::= { fraPConfigEntry 6 } fraPConfigPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { fraPConfigEntry 7 } fraPConfigSuba OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { fraPConfigEntry 8 } fraPConfigSaddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { fraPConfigEntry 9 } fraPConfigValidity OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Provides a way of deleting a row in the table when set to invalid." ::= { fraPConfigEntry 10 } fraPConfigDxivpi OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "This is the VPI for the PVC" ::= { fraPConfigEntry 11 } fraPConfigDxivci OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the VCI for the PVC" ::= { fraPConfigEntry 12 } fraPConfigDximode OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag indicates whether the mode is DXI - in that case the value of DLCI is ignored" ::= { fraPConfigEntry 13 } --___________________________________________________________________________ -- The Frame Relay Link B Status (frb) frbPStatTable OBJECT-TYPE SYNTAX SEQUENCE OF FrbPStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table shows statistics about the Frame Relay PVCs for link 1." ::= { dv2FrRelay 5 } frbPStatEntry OBJECT-TYPE SYNTAX FrbPStatEntry ACCESS not-accessible STATUS mandatory INDEX { frbPStatDlci } ::= { frbPStatTable 1 } FrbPStatEntry ::= SEQUENCE { frbPStatDlci INTEGER, frbPStatRxBCnt Counter, frbPStatTxBCnt Counter, frbPStatRxFCnt Counter, frbPStatTxFCnt Counter, frbPStatRxBRate Gauge, frbPStatTxBRate Gauge, frbPStatRxFRate Gauge, frbPStatTxFRate Gauge, frbPStatDERxF Counter, frbPStatDisRxF Counter, frbPStatPvcStat Hex, frbPStatLinkState Hex, frbPStatLocSeq INTEGER, frbPStatLocAck INTEGER, frbPStatLocStat INTEGER, frbPStatLocStartT INTEGER, frbPStatLocErrThr Counter, frbPStatLocMec Counter, frbPStatLocPoll Counter, frbPStatRemSeq INTEGER, frbPStatRemAck INTEGER, frbPStatRemStat INTEGER, frbPStatRemStartT INTEGER, frbPStatRemErrThr Counter, frbPStatRemMec Counter, frbPStatRemPoll Counter, -- Y2K change : deprecated -- frbPStatLastChange -- DateTimeString, -- Y2K change : added, use DateAndTime convention frbPStatLastChangeM2 DateAndTime } frbPStatDlci OBJECT-TYPE SYNTAX INTEGER (16..511) ACCESS read-only STATUS mandatory DESCRIPTION "This is the DLCI for the PVC." ::= { frbPStatEntry 1 } frbPStatRxBCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received." ::= { frbPStatEntry 2 } frbPStatTxBCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes transmitted." ::= { frbPStatEntry 3 } frbPStatRxFCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames received." ::= { frbPStatEntry 4 } frbPStatTxFCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames transmitted." ::= { frbPStatEntry 5 } frbPStatRxBRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of bytes being received." ::= { frbPStatEntry 6 } frbPStatTxBRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of bytes being transmitted." ::= { frbPStatEntry 7 } frbPStatRxFRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of frames being received." ::= { frbPStatEntry 8 } frbPStatTxFRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The rate of frames being transmitted." ::= { frbPStatEntry 9 } frbPStatDERxF OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of discarded eligible received frames." ::= { frbPStatEntry 10 } frbPStatDisRxF OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of discarded received frames." ::= { frbPStatEntry 11 } frbPStatPvcStat OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "The state of the PVC." ::= { frbPStatEntry 12 } frbPStatLinkState OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "The state of the link." ::= { frbPStatEntry 13 } frbPStatLocSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local send sequence." ::= { frbPStatEntry 14 } frbPStatLocAck OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local acknowledge number." ::= { frbPStatEntry 15 } frbPStatLocStat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local state of the link." ::= { frbPStatEntry 16 } frbPStatLocStartT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local start time for poll." ::= { frbPStatEntry 17 } frbPStatLocErrThr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The local error threshold Counter." ::= { frbPStatEntry 18 } frbPStatLocMec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The local monitored event Counter." ::= { frbPStatEntry 19 } frbPStatLocPoll OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The local poll Counter for DTE." ::= { frbPStatEntry 20 } frbPStatRemSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote send sequence." ::= { frbPStatEntry 21 } frbPStatRemAck OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote acknowledge number." ::= { frbPStatEntry 22 } frbPStatRemStat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote state of the link." ::= { frbPStatEntry 23 } frbPStatRemStartT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote start time for poll." ::= { frbPStatEntry 24 } frbPStatRemErrThr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The remote error threshold Counter." ::= { frbPStatEntry 25 } frbPStatRemMec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The remote monitored event Counter." ::= { frbPStatEntry 26 } frbPStatRemPoll OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The remote poll Counter for DTE." ::= { frbPStatEntry 27 } -- Y2K change : deprecated --frbPStatLastChange OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "The date and time of last state change." -- ::= { frbPStatEntry 28 } -- Y2K change : added use DateAndTime Convention frbPStatLastChangeM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "The date and time of last state change." ::= { frbPStatEntry 29 } --___________________________________________________________________________ -- The Frame Relay Link B Config (frb) frbPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FrbPConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dv2FrRelay 6 } frbPConfigEntry OBJECT-TYPE SYNTAX FrbPConfigEntry ACCESS not-accessible STATUS mandatory INDEX { frbPConfigDlci } ::= { frbPConfigTable 1 } FrbPConfigEntry ::= SEQUENCE { frbPConfigDlci INTEGER, frbPConfigCir INTEGER, frbPConfigCommitB INTEGER, frbPConfigExcessB INTEGER, frbVpi VirtualPathIdentifier, frbVci VirtualCircuitIdentifier, frbPConfigPriority INTEGER, frbPConfigSuba INTEGER, frbPConfigSaddr INTEGER, frbPConfigValidity INTEGER, frbPConfigDxivpi INTEGER, frbPConfigDxivci INTEGER, frbPConfigDximode INTEGER } frbPConfigDlci OBJECT-TYPE SYNTAX INTEGER (16..511) ACCESS read-write STATUS mandatory DESCRIPTION "This is the DLCI for the PVC." ::= { frbPConfigEntry 1 } frbPConfigCir OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The committed information rate." ::= { frbPConfigEntry 2 } frbPConfigCommitB OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The committed burst rate." ::= { frbPConfigEntry 3 } frbPConfigExcessB OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The excess burst size." ::= { frbPConfigEntry 4 } frbVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VPI for this call." ::= { frbPConfigEntry 5 } frbVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VCI for the call." ::= { frbPConfigEntry 6 } frbPConfigPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { frbPConfigEntry 7 } frbPConfigSuba OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { frbPConfigEntry 8 } frbPConfigSaddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { frbPConfigEntry 9 } frbPConfigValidity OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Provides a way of deleting a row in the table when set to invalid." ::= { frbPConfigEntry 10 } frbPConfigDxivpi OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "This is the VPI for the PVC" ::= { frbPConfigEntry 11 } frbPConfigDxivci OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the VCI for the PVC" ::= { frbPConfigEntry 12 } frbPConfigDximode OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag indicates whether the mode is DXI - in that case the value of DLCI is ignored" ::= { frbPConfigEntry 13 } --___________________________________________________________________________ -- The dv2VcStatus group vcaTable OBJECT-TYPE SYNTAX SEQUENCE OF VcaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table shows detailed status for native ATM slot controller card link A VCs." ::= { dv2VcStatus 3 } vcaEntry OBJECT-TYPE SYNTAX VcaEntry ACCESS not-accessible STATUS mandatory INDEX { vcaVpi, vcaVci } ::= { vcaTable 1 } VcaEntry ::= SEQUENCE { vcaVpi INTEGER, vcaVci INTEGER, vcaTxGCells Counter, vcaTxGCellsClp1 Counter, vcaRxGCells Counter, vcaExcessCells Counter, vcaPeakExceeds Counter, vcaCellHead Hex, vcaCellMask Hex, vcaCellSwitchHead Hex, vcaStartTime INTEGER, vcaBucketControl Hex, vcaBucket0CV Gauge, vcaBucket0Max Gauge, vcaBucket0Inc INTEGER, vcaBucket1CV Gauge, vcaBucket1Max Gauge, vcaBucket1Inc INTEGER, vcaBucket2CV Gauge, vcaBucket2Max Gauge, vcaBucket2Inc INTEGER, vcaBucket3CV Gauge, vcaBucket3Max Gauge, vcaBucket3Inc INTEGER, vcaType INTEGER, vcaDstSlot INTEGER, vcaDstLink INTEGER, vcaDstVpi INTEGER, vcaDstVci INTEGER, vcaInternalVpi INTEGER, vcaInternalVci INTEGER } vcaVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "Virtual path identifier for the VC." ::= { vcaEntry 1 } vcaVci OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Virtual channel identifier for the VC." ::= { vcaEntry 2 } vcaTxGCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted good cells CLP0." ::= { vcaEntry 3 } vcaTxGCellsClp1 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted good cells CLP1." ::= { vcaEntry 4 } vcaRxGCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received good cells." ::= { vcaEntry 5 } vcaExcessCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells discarded because of bucket overflow." ::= { vcaEntry 6 } vcaPeakExceeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells discarded because of peak cell rate violation." ::= { vcaEntry 7 } vcaCellHead OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This value is bitwise OR'd with the cell header." ::= { vcaEntry 8 } vcaCellMask OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This value is bitwise AND'd with the cell header." ::= { vcaEntry 9 } vcaCellSwitchHead OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This comprises a tag which is added to the cell before putting into the cell switch and a control byte." ::= { vcaEntry 10 } vcaStartTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the bucket start time." ::= { vcaEntry 11 } vcaBucketControl OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This is the bucket control register value." ::= { vcaEntry 12 } vcaBucket0CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 0." ::= { vcaEntry 13 } vcaBucket0Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 0." ::= { vcaEntry 14 } vcaBucket0Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 0 increment value." ::= { vcaEntry 15 } vcaBucket1CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 1." ::= { vcaEntry 16 } vcaBucket1Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 1." ::= { vcaEntry 17 } vcaBucket1Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 1 increment value." ::= { vcaEntry 18 } vcaBucket2CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 2." ::= { vcaEntry 19 } vcaBucket2Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 2." ::= { vcaEntry 20 } vcaBucket2Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 2 increment value." ::= { vcaEntry 21 } vcaBucket3CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 3." ::= { vcaEntry 22 } vcaBucket3Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 3." ::= { vcaEntry 23 } vcaBucket3Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 3 increment value." ::= { vcaEntry 24 } vcaType OBJECT-TYPE SYNTAX INTEGER { mgmt-vc(3), sr-pp-pvc(2), sr-pp-pvp(6), sr-mp-bi-pvc(10), sr-mp-bi-pvp(14), sr-mp-uni-pvc(26), sr-mp-uni-pvp(30), sr-pp-svc(1), sr-pp-svp(5), sr-mp-bi-svc(9), sr-mp-bi-svp(13), sr-mp-uni-svc(25), sr-mp-uni-svp(29), ds-pp-pvc(34), ds-pp-pvp(38), ds-mp-bi-pvc(42), ds-mp-bi-pvp(46), ds-mp-uni-pvc(58), ds-mp-uni-pvp(62), ds-pp-svc(33), ds-pp-svp(37), ds-mp-bi-svc(41), ds-mp-bi-svp(45), ds-mp-uni-svc(57), ds-mp-uni-svp(61) } ACCESS read-only STATUS mandatory DESCRIPTION "Virtual channel type for the VC." ::= { vcaEntry 25 } vcaDstSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "slot # this VC is going to" ::= { vcaEntry 26 } vcaDstLink OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "link # this VC is going to" ::= { vcaEntry 27 } vcaDstVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VPI this VC is destined for." ::= { vcaEntry 28 } vcaDstVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VCI for this VC is destined for." ::= { vcaEntry 29 } vcaInternalVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Internal VPI" ::= { vcaEntry 30 } vcaInternalVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Internal VCI" ::= { vcaEntry 31 } vcbTable OBJECT-TYPE SYNTAX SEQUENCE OF VcbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table shows detailed status for native ATM slot controller card link B VCs." ::= { dv2VcStatus 4 } vcbEntry OBJECT-TYPE SYNTAX VcbEntry ACCESS not-accessible STATUS mandatory INDEX { vcbVpi, vcbVci } ::= { vcbTable 1 } VcbEntry ::= SEQUENCE { vcbVpi INTEGER, vcbVci INTEGER, vcbTxGCells Counter, vcbTxGCellsClp1 Counter, vcbRxGCells Counter, vcbExcessCells Counter, vcbPeakExceeds Counter, vcbCellHead Hex, vcbCellMask Hex, vcbCellSwitchHead Hex, vcbStartTime INTEGER, vcbBucketControl Hex, vcbBucket0CV Gauge, vcbBucket0Max Gauge, vcbBucket0Inc INTEGER, vcbBucket1CV Gauge, vcbBucket1Max Gauge, vcbBucket1Inc INTEGER, vcbBucket2CV Gauge, vcbBucket2Max Gauge, vcbBucket2Inc INTEGER, vcbBucket3CV Gauge, vcbBucket3Max Gauge, vcbBucket3Inc INTEGER, vcbType INTEGER, vcbDstSlot INTEGER, vcbDstLink INTEGER, vcbDstVpi INTEGER, vcbDstVci INTEGER, vcbInternalVpi INTEGER, vcbInternalVci INTEGER } vcbVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "Virtual path identifier for the VC." ::= { vcbEntry 1 } vcbVci OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Virtual channel identifier for the VC." ::= { vcbEntry 2 } vcbTxGCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted good cells CLP0." ::= { vcbEntry 3 } vcbTxGCellsClp1 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted good cells CLP1." ::= { vcbEntry 4 } vcbRxGCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received good cells." ::= { vcbEntry 5 } vcbExcessCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells discarded because of bucket overflow." ::= { vcbEntry 6 } vcbPeakExceeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells discarded because of peak cell rate violation." ::= { vcbEntry 7 } vcbCellHead OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This value is bitwise OR'd with the cell header." ::= { vcbEntry 8 } vcbCellMask OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This value is bitwise AND'd with the cell header." ::= { vcbEntry 9 } vcbCellSwitchHead OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This comprises a tag which is added to the cell before putting into the cell switch and a control byte." ::= { vcbEntry 10 } vcbStartTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the bucket start time." ::= { vcbEntry 11 } vcbBucketControl OBJECT-TYPE SYNTAX Hex ACCESS read-only STATUS mandatory DESCRIPTION "This is the bucket control register value." ::= { vcbEntry 12 } vcbBucket0CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 0." ::= { vcbEntry 13 } vcbBucket0Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 0." ::= { vcbEntry 14 } vcbBucket0Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 0 increment value." ::= { vcbEntry 15 } vcbBucket1CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 1." ::= { vcbEntry 16 } vcbBucket1Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 1." ::= { vcbEntry 17 } vcbBucket1Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 1 increment value." ::= { vcbEntry 18 } vcbBucket2CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 2." ::= { vcbEntry 19 } vcbBucket2Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 2." ::= { vcbEntry 20 } vcbBucket2Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 2 increment value." ::= { vcbEntry 21 } vcbBucket3CV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current value of bucket 3." ::= { vcbEntry 22 } vcbBucket3Max OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value of bucket 3." ::= { vcbEntry 23 } vcbBucket3Inc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bucket 3 increment value." ::= { vcbEntry 24 } vcbType OBJECT-TYPE SYNTAX INTEGER { mgmt-vc(3), sr-pp-pvc(2), sr-pp-pvp(6), sr-mp-bi-pvc(10), sr-mp-bi-pvp(14), sr-mp-uni-pvc(26), sr-mp-uni-pvp(30), sr-pp-svc(1), sr-pp-svp(5), sr-mp-bi-svc(9), sr-mp-bi-svp(13), sr-mp-uni-svc(25), sr-mp-uni-svp(29), ds-pp-pvc(34), ds-pp-pvp(38), ds-mp-bi-pvc(42), ds-mp-bi-pvp(46), ds-mp-uni-pvc(58), ds-mp-uni-pvp(62), ds-pp-svc(33), ds-pp-svp(37), ds-mp-bi-svc(41), ds-mp-bi-svp(45), ds-mp-uni-svc(57), ds-mp-uni-svp(61) } ACCESS read-only STATUS mandatory DESCRIPTION "Virtual channel type for the VC." ::= { vcbEntry 25 } vcbDstSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "slot # this VC is going to" ::= { vcbEntry 26 } vcbDstLink OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "link # this VC is going to" ::= { vcbEntry 27 } vcbDstVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VPI this VC is destined for." ::= { vcbEntry 28 } vcbDstVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VCI for this VC is destined for." ::= { vcbEntry 29 } vcbInternalVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Internal VPI" ::= { vcbEntry 30 } vcbInternalVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Internal VCI" ::= { vcbEntry 31 } xpStatTable OBJECT-TYPE SYNTAX SEQUENCE OF XpStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table shows status of the switch fabric interface." ::= { dv2VcStatus 5 } xpStatEntry OBJECT-TYPE SYNTAX XpStatEntry ACCESS not-accessible STATUS mandatory INDEX { xpIFace } ::= { xpStatTable 1 } XpStatEntry ::= SEQUENCE { xpIFace INTEGER, xpRXCells Counter, xpTXCells Counter, xpBadVpiVci Counter, xpRxOverflow Counter, xpTxHighPrOver Counter, xpTxLowPrOver Counter, xpInputOverflow Counter, xpDocErrors Counter, xpLowPriorityFifo Counter, xpEgDiscCells Counter, xpIgDiscCells Counter } xpIFace OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Switch fabric interface number." ::= { xpStatEntry 1 } xpRXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Switch fabric received cell count." ::= { xpStatEntry 2 } xpTXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Switch fabric transmit cell count." ::= { xpStatEntry 3 } xpBadVpiVci OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells with bad VCI/VPI received." ::= { xpStatEntry 4 } xpRxOverflow OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of receiver overflows." ::= { xpStatEntry 5 } xpTxHighPrOver OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted cells with high priority overflow." ::= { xpStatEntry 6 } xpTxLowPrOver OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted cells with low priority overflow." ::= { xpStatEntry 7 } xpInputOverflow OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of M68302 fabric input overflow cells." ::= { xpStatEntry 8 } xpDocErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of DOC errors." ::= { xpStatEntry 9 } xpLowPriorityFifo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Read transmit low priority FIFO count." ::= { xpStatEntry 10 } xpEgDiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Read transmit discard cell count." ::= { xpStatEntry 11 } xpIgDiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Read receive discard cell count." ::= { xpStatEntry 12 } --___________________________________________________________________________ -- The New PDH config/status table -- PLCP config/status info from PLPP chip --___________________________________________________________________________ pdhPLCPTable OBJECT-TYPE SYNTAX SEQUENCE OF PdhPLCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for PLCP configuration and status" ::= { dv2PDH 1 } pdhPLCPEntry OBJECT-TYPE SYNTAX PdhPLCPEntry ACCESS not-accessible STATUS mandatory INDEX { pdhPLCPLinkNo } ::= { pdhPLCPTable 1 } PdhPLCPEntry ::= SEQUENCE { pdhPLCPLinkNo INTEGER, -- config info pdhPLCPLinkEnable INTEGER, pdhPLCPLinkStatusAffect INTEGER, pdhPLCPLinkState INTEGER, pdhPLCPPhyMode INTEGER, pdhPLCPMode INTEGER, pdhPLCPScrambler INTEGER, pdhPLCP0x55 INTEGER, pdhPLCPSmdsMode INTEGER, pdhPLCPIdleCell INTEGER, pdhPLCPLoopback INTEGER, pdhPLCPClear INTEGER, pdhPLCPReconfig INTEGER, pdhPLCPLpbkTimeout INTEGER, -- misc status pdhPLCPChipType INTEGER, pdhPLCPTXclock INTEGER, pdhPLCPRXclock INTEGER, -- cell stats pdhPLCPTXCells Counter, pdhPLCPRXCells Counter, pdhPLCPHCSErrs Counter, -- defects pdhPLCPLOCDDefect INTEGER, pdhPLCPYellowDefect INTEGER, pdhPLCPLOFDefect INTEGER, -- alarm pdhPLCPLOCDAlarm INTEGER, pdhPLCPYellowAlarm INTEGER, pdhPLCPLOFAlarm INTEGER, -- error counts pdhPLCPFrameErrs Counter, pdhPLCPBIP8Errs Counter, pdhPLCPFEBEErrs Counter, -- performance parameters pdhPLCPES Counter, pdhPLCPSES Counter, pdhPLCPUAS Counter, pdhPLCPFEES Counter, pdhPLCPFESES Counter, pdhPLCPFEUAS Counter } pdhPLCPLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number" ::= { pdhPLCPEntry 1 } pdhPLCPLinkEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable Link" ::= { pdhPLCPEntry 2 } pdhPLCPLinkStatusAffect OBJECT-TYPE SYNTAX INTEGER { ignored(2), processed(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Link Status affect on receiving/transmitting" ::= { pdhPLCPEntry 3 } pdhPLCPLinkState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current Link State" ::= { pdhPLCPEntry 4 } pdhPLCPPhyMode OBJECT-TYPE SYNTAX INTEGER { none(1), ds3(2), e3(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The physical framing for link" ::= { pdhPLCPEntry 5 } pdhPLCPMode OBJECT-TYPE SYNTAX INTEGER { hec-based-delineation(1), ds1-PLCP(2), ds3-PLCP(3), e1-PLCP(4), e3-g751-PLCP(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The PLCP mode for link." ::= { pdhPLCPEntry 6 } pdhPLCPScrambler OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable scrambling" ::= { pdhPLCPEntry 7 } pdhPLCP0x55 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable XORing HCS with 0x55" ::= { pdhPLCPEntry 8 } pdhPLCPSmdsMode OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable SMDS mode" ::= { pdhPLCPEntry 9 } pdhPLCPIdleCell OBJECT-TYPE SYNTAX INTEGER { unassigned(1), idle(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Idle Cell Header Contents" ::= { pdhPLCPEntry 10 } pdhPLCPLoopback OBJECT-TYPE SYNTAX INTEGER { none(1), diagnostic-lpbk(2), line-lpbk(3), payload-lpbk(4), cell-lpbk(5) } ACCESS read-write STATUS mandatory DESCRIPTION "PLCP Loopback" ::= { pdhPLCPEntry 11 } pdhPLCPClear OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear PLCP counts" ::= { pdhPLCPEntry 12 } pdhPLCPReconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure link" ::= { pdhPLCPEntry 13 } pdhPLCPLpbkTimeout OBJECT-TYPE SYNTAX INTEGER (1..604800) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to set the loopback timeout in minutes." ::= { pdhPLCPEntry 14 } pdhPLCPChipType OBJECT-TYPE SYNTAX INTEGER { plpp(1), suni-pdh(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "PDH Chip Type" DEFVAL { unknown } ::= { pdhPLCPEntry 32 } pdhPLCPTXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of TX clock for this link." ::= { pdhPLCPEntry 33 } pdhPLCPRXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of RX clock for this link." ::= { pdhPLCPEntry 34 } pdhPLCPTXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The transmit cells count for this link." ::= { pdhPLCPEntry 35 } pdhPLCPRXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The receive cells count for this link." ::= { pdhPLCPEntry 36 } pdhPLCPHCSErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The header checksum error count for this link." ::= { pdhPLCPEntry 37 } pdhPLCPLOCDDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss of cell delineation Defect" ::= { pdhPLCPEntry 43 } pdhPLCPYellowDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Yellow Defect" ::= { pdhPLCPEntry 44 } pdhPLCPLOFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Loss Of Frame Defect" ::= { pdhPLCPEntry 45 } pdhPLCPLOCDAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss of cell delineation Alarm" ::= { pdhPLCPEntry 49 } pdhPLCPYellowAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Yellow Alarm" ::= { pdhPLCPEntry 50 } pdhPLCPLOFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Loss Of Frame Alarm" ::= { pdhPLCPEntry 51 } pdhPLCPFrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of PLCP frame errors" ::= { pdhPLCPEntry 56 } pdhPLCPBIP8Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of PLCP BIP-8 errors" ::= { pdhPLCPEntry 57 } pdhPLCPFEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of PLCP FEBE errors" ::= { pdhPLCPEntry 58 } pdhPLCPES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Errored Seconds" ::= { pdhPLCPEntry 63 } pdhPLCPSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Severely Errored Seconds" ::= { pdhPLCPEntry 64 } pdhPLCPUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Unavailable Seconds" ::= { pdhPLCPEntry 65 } pdhPLCPFEES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Far End Errored Seconds" ::= { pdhPLCPEntry 66 } pdhPLCPFESES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Far End Severely Errored Seconds" ::= { pdhPLCPEntry 67 } pdhPLCPFEUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PLCP Far End Unavailable Seconds" ::= { pdhPLCPEntry 68 } -- ******** DS3 config/status info obtained from PLPP chip **************** pdhDS3Table OBJECT-TYPE SYNTAX SEQUENCE OF PdhDS3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for DS3 config/status supplied by the PLPP chip" ::= { dv2PDH 2 } pdhDS3Entry OBJECT-TYPE SYNTAX PdhDS3Entry ACCESS not-accessible STATUS mandatory INDEX { pdhDS3LinkNo } ::= { pdhDS3Table 1 } PdhDS3Entry ::= SEQUENCE { pdhDS3TableValid INTEGER, pdhDS3LinkNo INTEGER, -- config info pdhDS3Framer INTEGER, pdhDS3TxAIS INTEGER, pdhDS3Clear INTEGER, pdhDS3Reconfig INTEGER, -- misc status' pdhDS3RxFrmFmt INTEGER, pdhDS3RxIDL INTEGER, pdhDS3FEACTxmt INTEGER, -- error counts pdhDS3Lcvs Counter, pdhDS3FrameErrs Counter, pdhDS3ParityErrs Counter, pdhDS3CbitPrtyErrs Counter, pdhDS3FEBEErrs Counter, -- defects pdhDS3LOSDefect INTEGER, pdhDS3OOFDefect INTEGER, pdhDS3AISDefect INTEGER, pdhDS3YellowDefect INTEGER, pdhDS3ExBERDefect INTEGER, -- alarms pdhDS3LOSAlarm INTEGER, pdhDS3LOFAlarm INTEGER, pdhDS3AISAlarm INTEGER, pdhDS3YellowAlarm INTEGER, pdhDS3ExBERAlarm INTEGER, -- performance parameters pdhDS3LES Counter, pdhDS3LSES Counter, pdhDS3ES Counter, pdhDS3ES2 Counter, pdhDS3SES Counter, pdhDS3SES2 Counter, pdhDS3AISS Counter, pdhDS3UAS Counter, pdhDS3FarEndES Counter, pdhDS3FarEndSES Counter, pdhDS3FarEndUAS Counter } pdhDS3TableValid OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if table is valid for configured LIM" ::= { pdhDS3Entry 1 } pdhDS3LinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number" ::= { pdhDS3Entry 2 } pdhDS3Framer OBJECT-TYPE SYNTAX INTEGER { c-bit(1), m23(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DS3 framer mode" ::= { pdhDS3Entry 3 } pdhDS3TxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit AIS" ::= { pdhDS3Entry 4 } pdhDS3Clear OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Button for Counters" ::= { pdhDS3Entry 5 } pdhDS3Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure link" ::= { pdhDS3Entry 6 } pdhDS3RxFrmFmt OBJECT-TYPE SYNTAX INTEGER { c-bit(1), clear-channel(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive framing format" ::= { pdhDS3Entry 26 } pdhDS3RxIDL OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive IDLE status" ::= { pdhDS3Entry 27 } pdhDS3FEACTxmt OBJECT-TYPE SYNTAX INTEGER { none(7), line-loopback-active(6), line-loopback-deactive(5), ds3-idl(4), ds3-ais(3), ds3-oof(2), ds3-los(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Code that has been transmitted as a FEAC." ::= { pdhDS3Entry 28 } pdhDS3Lcvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Line Code Violation count" ::= { pdhDS3Entry 33 } pdhDS3FrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DS3 frame error count" ::= { pdhDS3Entry 34 } pdhDS3ParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DS3 parity error count" ::= { pdhDS3Entry 35 } pdhDS3CbitPrtyErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DS3 C-bit parity error count" ::= { pdhDS3Entry 36 } pdhDS3FEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DS3 FEBE error count" ::= { pdhDS3Entry 37 } pdhDS3LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Loss of Signal Defect" ::= { pdhDS3Entry 43 } pdhDS3OOFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Out of Frame Defect" ::= { pdhDS3Entry 44 } pdhDS3AISDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 AIS Defect" ::= { pdhDS3Entry 45 } pdhDS3YellowDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Yellow Defect" ::= { pdhDS3Entry 46 } pdhDS3ExBERDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Defect" ::= { pdhDS3Entry 47 } pdhDS3LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Loss of Signal Alarm" ::= { pdhDS3Entry 53 } pdhDS3LOFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Loss of Frame Defect" ::= { pdhDS3Entry 54 } pdhDS3AISAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 AIS Defect" ::= { pdhDS3Entry 55 } pdhDS3YellowAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "DS3 Yellow Alarm" ::= { pdhDS3Entry 56 } pdhDS3ExBERAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Alarm" ::= { pdhDS3Entry 57 } pdhDS3LES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { pdhDS3Entry 63 } pdhDS3LSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { pdhDS3Entry 64 } pdhDS3ES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Errored Seconds" ::= { pdhDS3Entry 65 } pdhDS3ES2 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Secondary Errored Seconds (C-bit mode only)" ::= { pdhDS3Entry 66 } pdhDS3SES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Seconds" ::= { pdhDS3Entry 67 } pdhDS3SES2 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Secondary Severely Errored Seconds (C-bit mode only)" ::= { pdhDS3Entry 68 } pdhDS3AISS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS Seconds" ::= { pdhDS3Entry 69 } pdhDS3UAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds" ::= { pdhDS3Entry 70 } pdhDS3FarEndES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Errored Seconds" ::= { pdhDS3Entry 71 } pdhDS3FarEndSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Severely Errored Seconds" ::= { pdhDS3Entry 72 } pdhDS3FarEndUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Unavailable Seconds" ::= { pdhDS3Entry 73 } -- **************** E3 config/status info obtained from PLPP chip ************ pdhE3Table OBJECT-TYPE SYNTAX SEQUENCE OF PdhE3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for E3 config/status supplied by the PLPP chip" ::= { dv2PDH 3 } pdhE3Entry OBJECT-TYPE SYNTAX PdhE3Entry ACCESS not-accessible STATUS mandatory INDEX { pdhE3LinkNo } ::= { pdhE3Table 1 } PdhE3Entry ::= SEQUENCE { pdhE3TableValid INTEGER, pdhE3LinkNo INTEGER, pdhE3Framer INTEGER, pdhE3Clear INTEGER, pdhE3Reconfig INTEGER, -- G832 trail trace config stuff pdhE3TxmtTimMk INTEGER, pdhE3PloadTypeLab INTEGER, pdhE3TxTrlTrcIdLen INTEGER, pdhE3TxTrcIdUH PhysAddress, pdhE3TxTrcIdLH PhysAddress, pdhE3RxExTrcIdUH PhysAddress, pdhE3RxExTrcIdLH PhysAddress, -- Error counts pdhE3FrameErrs Counter, pdhE3Lcvs Counter, pdhE3ParityErrs Counter, pdhE3FEBEErrs Counter, -- Defects pdhE3LOSDefect INTEGER, pdhE3OOFDefect INTEGER, pdhE3AISDefect INTEGER, pdhE3FERFDefect INTEGER, pdhE3ExBERDefect INTEGER, -- Alarms pdhE3LOSAlarm INTEGER, pdhE3LOFAlarm INTEGER, pdhE3AISAlarm INTEGER, pdhE3FERFAlarm INTEGER, pdhE3ExBERAlarm INTEGER, -- Performance Parameters pdhE3LES Counter, pdhE3LSES Counter, pdhE3ES Counter, pdhE3SES Counter, pdhE3AISS Counter, pdhE3UAS Counter, -- G832 specific entries pdhE3RxTrlTrc PhysAddress, pdhE3RxTrIdMis INTEGER, pdhE3RxTrIdUnst INTEGER, pdhE3RxPloadTypeLabMis INTEGER, pdhE3RxPloadTypeLabUnst INTEGER } pdhE3TableValid OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if table is valid for configured LIM" ::= { pdhE3Entry 1 } pdhE3LinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number" ::= { pdhE3Entry 2 } pdhE3Framer OBJECT-TYPE SYNTAX INTEGER { g832(2), g751(1) } ACCESS read-write STATUS mandatory DESCRIPTION "E3 framer mode" ::= { pdhE3Entry 3 } pdhE3Clear OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Button for Counters" ::= { pdhE3Entry 4 } pdhE3Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure link" ::= { pdhE3Entry 5 } pdhE3TxmtTimMk OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) if traceable to primary ref clk." ::= { pdhE3Entry 6 } pdhE3PloadTypeLab OBJECT-TYPE SYNTAX INTEGER { atm(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Payload type label." ::= { pdhE3Entry 7 } pdhE3TxTrlTrcIdLen OBJECT-TYPE SYNTAX INTEGER { length-16(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Trail trace length for transmit and expected receive." ::= { pdhE3Entry 8 } pdhE3TxTrcIdUH OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "Transmit trail trace ID upper half." ::= { pdhE3Entry 9 } pdhE3TxTrcIdLH OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "Transmit trail trace ID lower half." ::= { pdhE3Entry 10 } pdhE3RxExTrcIdUH OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "Receive expected trail trace ID upper half." ::= { pdhE3Entry 11 } pdhE3RxExTrcIdLH OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "Receive expected trail trace ID lower half." ::= { pdhE3Entry 12 } pdhE3FrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "E3 frame error count" ::= { pdhE3Entry 32 } pdhE3Lcvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "E3 Line Code Violation count" ::= { pdhE3Entry 33 } pdhE3ParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "E3-G832 parity error count" ::= { pdhE3Entry 34 } pdhE3FEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "E3-G832 FEBE error count" ::= { pdhE3Entry 35 } pdhE3LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LOS Defect" ::= { pdhE3Entry 41 } pdhE3OOFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LOF Defect" ::= { pdhE3Entry 42 } pdhE3AISDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS Defect" ::= { pdhE3Entry 43 } pdhE3FERFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "FERF Defect" ::= { pdhE3Entry 44 } pdhE3ExBERDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Defect" ::= { pdhE3Entry 45 } pdhE3LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LOS Alarm" ::= { pdhE3Entry 51 } pdhE3LOFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LOF Alarm" ::= { pdhE3Entry 52 } pdhE3AISAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS Alarm" ::= { pdhE3Entry 53 } pdhE3FERFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "FERF Alarm" ::= { pdhE3Entry 54 } pdhE3ExBERAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Alarm" ::= { pdhE3Entry 55 } pdhE3LES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { pdhE3Entry 61 } pdhE3LSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { pdhE3Entry 62 } pdhE3ES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Errored Seconds" ::= { pdhE3Entry 63 } pdhE3SES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Seconds" ::= { pdhE3Entry 64 } pdhE3AISS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS Seconds" ::= { pdhE3Entry 65 } pdhE3UAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds" ::= { pdhE3Entry 66 } pdhE3RxTrlTrc OBJECT-TYPE SYNTAX PhysAddress (SIZE (16)) ACCESS read-only STATUS mandatory DESCRIPTION "Last received trail trace message." ::= { pdhE3Entry 76 } pdhE3RxTrIdMis OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive trace id mismatch indication." ::= { pdhE3Entry 77 } pdhE3RxTrIdUnst OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive trace id unstable indication." ::= { pdhE3Entry 78 } pdhE3RxPloadTypeLabMis OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive payload type label mismatch indication." ::= { pdhE3Entry 79 } pdhE3RxPloadTypeLabUnst OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive payload type label unstable indication." ::= { pdhE3Entry 80 } --___________________________________________________________________________ -- The PLPP config table plppCTable OBJECT-TYPE SYNTAX SEQUENCE OF PlppCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to control PLPP configuration." ::= { dv2PLPP 1 } plppCEntry OBJECT-TYPE SYNTAX PlppCEntry ACCESS not-accessible STATUS mandatory INDEX { plppCLinkNo } ::= { plppCTable 1 } PlppCEntry ::= SEQUENCE { plppCLinkNo INTEGER, plppCLinkEnab INTEGER, plppCCPLCPMode INTEGER, plppCDS3Framer INTEGER, plppCScrambler INTEGER, plppC0x55 INTEGER, plppCCLine INTEGER, plppCLoopback INTEGER, -- plppCLoopTimer -- INTEGER, -- plppCLoopDiag -- INTEGER, -- plppCLoopLine -- INTEGER, plppCSmdsMode INTEGER, plppCPloadTypeLab INTEGER, plppCTxTrlTrcIdLen INTEGER, plppCTxTrcId PhysAddress, plppCRxExTrcId PhysAddress } plppCLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { plppCEntry 1 } plppCLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { plppCEntry 2 } plppCCPLCPMode OBJECT-TYPE SYNTAX INTEGER { none(1), e1(2), g751-e3(3), ds1(4), ds3(5), g832-e3(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The PLCP mode for link." ::= { plppCEntry 3 } plppCDS3Framer OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the DS3 framer mode for this link." ::= { plppCEntry 4 } plppCScrambler OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to disable the scrambler mode for this link." ::= { plppCEntry 5 } plppC0x55 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to no(2) then HCS is not XORed with 0x55" ::= { plppCEntry 6 } plppCCLine OBJECT-TYPE SYNTAX INTEGER { processed(1), ignored(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control line processing for this link." ::= { plppCEntry 7 } plppCLoopback OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable loopback mode for this link." ::= { plppCEntry 8 } -- plppCLoopTimer OBJECT-TYPE -- SYNTAX INTEGER { -- no(2), -- yes(1) -- } -- ACCESS read-write -- STATUS deprecated -- DESCRIPTION -- "Set to yes(1) to enable loop timing." -- ::= { plppCEntry 9 } -- plppCLoopDiag OBJECT-TYPE -- SYNTAX INTEGER { -- no(2), -- yes(1) -- } -- ACCESS read-write -- STATUS deprecated -- DESCRIPTION -- "Set to yes(1) to enable diagnostic loopback." -- ::= { plppCEntry 10 } -- plppCLoopLine OBJECT-TYPE -- SYNTAX INTEGER { -- no(2), -- yes(1) -- } -- ACCESS read-write -- STATUS deprecated -- DESCRIPTION -- "Set to yes(1) to enable line loopback." -- ::= { plppCEntry 11 } plppCSmdsMode OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable SMDS mode." ::= { plppCEntry 12 } plppCPloadTypeLab OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Pay type label." ::= { plppCEntry 13 } plppCTxTrlTrcIdLen OBJECT-TYPE SYNTAX INTEGER { l16(16), l64(64) } ACCESS read-write STATUS mandatory DESCRIPTION "Trail trace length for transmit and expected receive." ::= { plppCEntry 14 } plppCTxTrcId OBJECT-TYPE SYNTAX PhysAddress (SIZE (16..64)) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit trail trace identifier." ::= { plppCEntry 15 } plppCRxExTrcId OBJECT-TYPE SYNTAX PhysAddress (SIZE (16..64)) ACCESS read-write STATUS mandatory DESCRIPTION "Receive expected trail trace identifier." ::= { plppCEntry 16 } --___________________________________________________________________________ -- The plpp status table plppSTable OBJECT-TYPE SYNTAX SEQUENCE OF PlppSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The status table for plpp." ::= { dv2PLPP 2 } plppSEntry OBJECT-TYPE SYNTAX PlppSEntry ACCESS not-accessible STATUS mandatory INDEX { plppSLinkNo } ::= { plppSTable 1 } PlppSEntry ::= SEQUENCE { plppSLinkNo INTEGER, plppSCLines INTEGER, plppSTXclock INTEGER, plppSRXclock INTEGER, plppSTXCells Counter, plppSRXCells Counter, plppSHCSErrs Counter, -- plppSBadVciPi -- INTEGER, -- plppSRXOverflows -- Counter, -- plppSXPOverflows -- Counter, plppSFrameErrs Counter, plppSBIP8Errs Counter, plppSFEBEErrs Counter, plppSSPLRStatus INTEGER, plppSDs3Lcvs Counter, plppSDs3FrameErrs Counter, plppSDs3ParityErrs Counter, plppSDs3CbitPrtyErrs Counter, plppSDs3FEBEErrs Counter, plppSDs3RxAIS INTEGER, plppSDs3RxRedAlarm INTEGER, plppSDs3RxYellowAlarm INTEGER, plppSPLCPRxYellowAlarm INTEGER, plppsRxTrIdMis INTEGER, plppsRxTrIdUnst INTEGER, plppsRxPloadTypeLabMis INTEGER, plppsRxPloadTypeLabUnst INTEGER, plppsRxTrlTrc PhysAddress } plppSLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { plppSEntry 1 } plppSCLines OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of control lines for this link." ::= { plppSEntry 2 } plppSTXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of TX clock for this link." ::= { plppSEntry 3 } plppSRXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of RX clock for this link." ::= { plppSEntry 4 } plppSTXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The transmit cells count for this link." ::= { plppSEntry 5 } plppSRXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The receive cells count for this link." ::= { plppSEntry 6 } plppSHCSErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The header checksum error count for this link." ::= { plppSEntry 7 } --plppSBadVciPi OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Invalid VPI/VCI cells." -- ::= { plppSEntry 8 } --plppSRXOverflows OBJECT-TYPE -- SYNTAX Counter -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Receiver overflows." -- ::= { plppSEntry 9 } --plppSXPOverflows OBJECT-TYPE -- SYNTAX Counter -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "XP overflows." -- ::= { plppSEntry 10 } plppSFrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The frame error count for this link." ::= { plppSEntry 11 } plppSBIP8Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The BIP-8 error count for this link." ::= { plppSEntry 12 } plppSFEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The FEBE error count for this link." ::= { plppSEntry 13 } plppSSPLRStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The SPLR Status Register Contents." ::= { plppSEntry 14 } plppSDs3Lcvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 LCV count for this link." ::= { plppSEntry 15 } plppSDs3FrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 frame error count for this link." ::= { plppSEntry 16 } plppSDs3ParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 parity error count for this link." ::= { plppSEntry 17 } plppSDs3CbitPrtyErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 control bit parity error count for this link." ::= { plppSEntry 18 } plppSDs3FEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 FEBE error count for this link." ::= { plppSEntry 19 } plppSDs3RxAIS OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 AIS status." ::= { plppSEntry 20 } plppSDs3RxRedAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 Red Alarm status." ::= { plppSEntry 21 } plppSDs3RxYellowAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 Yellow Alarm status." ::= { plppSEntry 22 } plppSPLCPRxYellowAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive PLCP Yellow Alarm status." ::= { plppSEntry 23 } plppsRxTrIdMis OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive trace id mismatch indication." ::= { plppSEntry 24 } plppsRxTrIdUnst OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive trace id unstable indication." ::= { plppSEntry 25 } plppsRxPloadTypeLabMis OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive payload type label mismatch indication." ::= { plppSEntry 26 } plppsRxPloadTypeLabUnst OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive payload type label unstable indication." ::= { plppSEntry 27 } plppsRxTrlTrc OBJECT-TYPE SYNTAX PhysAddress (SIZE (16..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Last received trail trace message." ::= { plppSEntry 28 } --___________________________________________________________________________ -- The PLPP DS3-2C Config table plppV2CTable OBJECT-TYPE SYNTAX SEQUENCE OF PlppV2CEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to control DS3-2C PLPP configuration." ::= { dv2PLPP 3 } plppV2CEntry OBJECT-TYPE SYNTAX PlppV2CEntry ACCESS not-accessible STATUS mandatory INDEX { plppV2CLinkNo } ::= { plppV2CTable 1 } PlppV2CEntry ::= SEQUENCE { plppV2CLinkNo INTEGER, plppV2CLinkEnab INTEGER, plppV2CCPLCPMode INTEGER, plppV2CDS3Framer INTEGER, plppV2CScrambler INTEGER, plppV2C0x55 INTEGER, plppV2CLoopback INTEGER, plppV2CSmdsMode INTEGER, plppV2CFrmFmt INTEGER, plppV2CTxAIS INTEGER } plppV2CLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { plppV2CEntry 1 } plppV2CLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { plppV2CEntry 2 } plppV2CCPLCPMode OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the PLCP layer mode for this link." ::= { plppV2CEntry 3 } plppV2CDS3Framer OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the DS3 framer mode for this link." ::= { plppV2CEntry 4 } plppV2CScrambler OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to disable the scrambler mode for this link." ::= { plppV2CEntry 5 } plppV2C0x55 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to no(2) then HCS is not XORed with 0x55" ::= { plppV2CEntry 6 } plppV2CLoopback OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable loopback mode for this link." ::= { plppV2CEntry 7 } plppV2CSmdsMode OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable SMDS mode." ::= { plppV2CEntry 8 } plppV2CFrmFmt OBJECT-TYPE SYNTAX INTEGER { c-bit(1), clear-channel(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable C-bit parity framing format." ::= { plppV2CEntry 9 } plppV2CTxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable framer to Txmt AIS." ::= { plppV2CEntry 10 } --___________________________________________________________________________ -- The DS3-2C plpp status table plppV2STable OBJECT-TYPE SYNTAX SEQUENCE OF PlppV2SEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The status table for DS3-2C plpp." ::= { dv2PLPP 4 } plppV2SEntry OBJECT-TYPE SYNTAX PlppV2SEntry ACCESS not-accessible STATUS mandatory INDEX { plppV2SLinkNo } ::= { plppV2STable 1 } PlppV2SEntry ::= SEQUENCE { plppV2SLinkNo INTEGER, plppV2STXclock INTEGER, plppV2SRXclock INTEGER, plppV2STXCells Counter, plppV2SRXCells Counter, plppV2SHCSErrs Counter, plppV2SFrameErrs Counter, plppV2SBIP8Errs Counter, plppV2SFEBEErrs Counter, plppV2SSPLRStatus INTEGER, plppV2SDs3FrmFmt INTEGER, plppV2SDs3Lcvs Counter, plppV2SDs3FrameErrs Counter, plppV2SDs3ParityErrs Counter, plppV2SDs3CbitPrtyErrs Counter, plppV2SDs3FEBEErrs Counter, plppV2SDs3RxAIS INTEGER, plppV2SDs3RxRedAlarm INTEGER, plppV2SDs3RxYellowAlarm INTEGER, plppV2SPLCPRxYellowAlarm INTEGER, plppV2SDs3FEACTxmt INTEGER, plppV2SRxIDL INTEGER, plppV2SLOC INTEGER, plppV2SDs3LPBK INTEGER } plppV2SLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { plppV2SEntry 1 } plppV2STXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of TX clock for this link." ::= { plppV2SEntry 2 } plppV2SRXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of RX clock for this link." ::= { plppV2SEntry 3 } plppV2STXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The transmit cells count for this link." ::= { plppV2SEntry 4 } plppV2SRXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The receive cells count for this link." ::= { plppV2SEntry 5 } plppV2SHCSErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The header checksum error count for this link." ::= { plppV2SEntry 6 } plppV2SFrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The frame error count for this link." ::= { plppV2SEntry 7 } plppV2SBIP8Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The BIP-8 error count for this link." ::= { plppV2SEntry 8 } plppV2SFEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The FEBE error count for this link." ::= { plppV2SEntry 9 } plppV2SSPLRStatus OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "yes(1) indicates a PLCP LOF." ::= { plppV2SEntry 10 } plppV2SDs3FrmFmt OBJECT-TYPE SYNTAX INTEGER { c-bit(1), clear-channel(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Operate in DS3 C-bit Parity or drop-back to Clear Channel." ::= { plppV2SEntry 11 } plppV2SDs3Lcvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 LCV count for this link." ::= { plppV2SEntry 12 } plppV2SDs3FrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 frame error count for this link." ::= { plppV2SEntry 13 } plppV2SDs3ParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 parity error count for this link." ::= { plppV2SEntry 14 } plppV2SDs3CbitPrtyErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 control bit parity error count for this link." ::= { plppV2SEntry 15 } plppV2SDs3FEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The DS3 FEBE error count for this link." ::= { plppV2SEntry 16 } plppV2SDs3RxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 AIS status." ::= { plppV2SEntry 17 } plppV2SDs3RxRedAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 Red Alarm status." ::= { plppV2SEntry 18 } plppV2SDs3RxYellowAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive DS3 Yellow Alarm status." ::= { plppV2SEntry 19 } plppV2SPLCPRxYellowAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive PLCP Yellow Alarm status." ::= { plppV2SEntry 20 } plppV2SDs3FEACTxmt OBJECT-TYPE SYNTAX INTEGER { none(7), line-loopback-active(6), line-loopback-deactive(5), ds3-idl(4), ds3-ais(3), ds3-oof(2), ds3-los(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Code that has been transmitted as a FEAC." ::= { plppV2SEntry 21 } plppV2SRxIDL OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "yes(1) indicates an IDLE has been received." ::= { plppV2SEntry 22 } plppV2SLOC OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Loss of cell delineation." ::= { plppV2SEntry 23 } plppV2SDs3LPBK OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "if yes(1), the DS3 Framer is in loopback." ::= { plppV2SEntry 24 } --___________________________________________________________________________ -- The PLPP E1-2C config table plppE1CTable OBJECT-TYPE SYNTAX SEQUENCE OF PlppE1CEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table to control the E1-2C PLPP configuration." ::= { dv2PLPP 5 } plppE1CEntry OBJECT-TYPE SYNTAX PlppE1CEntry ACCESS not-accessible STATUS mandatory INDEX { plppE1CLinkNo } ::= { plppE1CTable 1 } PlppE1CEntry ::= SEQUENCE { plppE1CLinkNo INTEGER, plppE1CLinkEnab INTEGER, plppE1CScrambler INTEGER, plppE1C0x55 INTEGER, plppE1CSmdsMode INTEGER, plppE1CLpbk INTEGER } plppE1CLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { plppE1CEntry 1 } plppE1CLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { plppE1CEntry 2 } plppE1CScrambler OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to disable the scrambler mode for this link." ::= { plppE1CEntry 3 } plppE1C0x55 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to no(2) then HCS is not XORed with 0x55" ::= { plppE1CEntry 4 } plppE1CSmdsMode OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable SMDS mode." ::= { plppE1CEntry 5 } plppE1CLpbk OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable DOC Framer loopback." ::= { plppE1CEntry 6 } --___________________________________________________________________________ -- The plpp E1-2C status table plppE1STable OBJECT-TYPE SYNTAX SEQUENCE OF PlppE1SEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The status table for E1-2C plpp." ::= { dv2PLPP 6 } plppE1SEntry OBJECT-TYPE SYNTAX PlppE1SEntry ACCESS not-accessible STATUS mandatory INDEX { plppE1SLinkNo } ::= { plppE1STable 1 } PlppE1SEntry ::= SEQUENCE { plppE1SLinkNo INTEGER, plppE1STXclock INTEGER, plppE1SRXclock INTEGER, plppE1STXCells Counter, plppE1SRXCells Counter, plppE1SHCSErrs Counter, plppE1SCRCErrs Counter, plppE1SFrameErrs Counter, plppE1SFEBEErrs Counter, plppE1SLcvs Counter, plppE1SRxAIS INTEGER, plppE1SRxOOF INTEGER, plppE1SRxLOS INTEGER, plppE1SRxLOF INTEGER, plppE1SFerf INTEGER } plppE1SLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { plppE1SEntry 1 } plppE1STXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of TX clock for this link." ::= { plppE1SEntry 2 } plppE1SRXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of RX clock for this link." ::= { plppE1SEntry 3 } plppE1STXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The transmit cells count for this link." ::= { plppE1SEntry 4 } plppE1SRXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The receive cells count for this link." ::= { plppE1SEntry 5 } plppE1SHCSErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The HCS error count for this link." ::= { plppE1SEntry 6 } plppE1SCRCErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The CRC-4 error count for this link." ::= { plppE1SEntry 7 } plppE1SFrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The frame error count for this link." ::= { plppE1SEntry 8 } plppE1SFEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The FEBE error count for this link." ::= { plppE1SEntry 9 } plppE1SLcvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The E1 LCV count for this link." ::= { plppE1SEntry 10 } plppE1SRxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E1 AIS status." ::= { plppE1SEntry 11 } plppE1SRxOOF OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E1 OOF status." ::= { plppE1SEntry 12 } plppE1SRxLOS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E1 LOS status." ::= { plppE1SEntry 13 } plppE1SRxLOF OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E1 LOF status." ::= { plppE1SEntry 14 } plppE1SFerf OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receiving a Far-End Receive Failure if yes." ::= { plppE1SEntry 15 } --___________________________________________________________________________ -- The PLPP E3-2C config table plppE3CTable OBJECT-TYPE SYNTAX SEQUENCE OF PlppE3CEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to control the E3-2C PLPP configuration." ::= { dv2PLPP 7 } plppE3CEntry OBJECT-TYPE SYNTAX PlppE3CEntry ACCESS not-accessible STATUS mandatory INDEX { plppE3CLinkNo } ::= { plppE3CTable 1 } PlppE3CEntry ::= SEQUENCE { plppE3CLinkNo INTEGER, plppE3CLinkEnab INTEGER, plppE3CFramer INTEGER, plppE3CPLCPMode INTEGER, plppE3CScrambler INTEGER, plppE3C0x55 INTEGER, plppE3CLoopback INTEGER, plppE3CSmdsMode INTEGER, plppE3CTxmtTimMk INTEGER, plppE3CPloadTypeLab INTEGER, plppE3CTxTrlTrcIdLen INTEGER, plppE3CTxTrcIdUH PhysAddress, plppE3CTxTrcIdLH PhysAddress, plppE3CRxExTrcIdUH PhysAddress, plppE3CRxExTrcIdLH PhysAddress } plppE3CLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { plppE3CEntry 1 } plppE3CLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { plppE3CEntry 2 } plppE3CFramer OBJECT-TYPE SYNTAX INTEGER { g832(3), g751(2), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The E3 framer mode for the link." ::= { plppE3CEntry 3 } plppE3CPLCPMode OBJECT-TYPE SYNTAX INTEGER { none(1), g751(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The PLCP mode for the link." ::= { plppE3CEntry 4 } plppE3CScrambler OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to disable the scrambler mode for this link." ::= { plppE3CEntry 5 } plppE3C0x55 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to no(2) then HCS is not XORed with 0x55" ::= { plppE3CEntry 6 } plppE3CLoopback OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable loopback mode for this link." ::= { plppE3CEntry 7 } plppE3CSmdsMode OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable SMDS mode." ::= { plppE3CEntry 8 } plppE3CTxmtTimMk OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) if traceable to primary ref clk." ::= { plppE3CEntry 9 } plppE3CPloadTypeLab OBJECT-TYPE SYNTAX INTEGER { atm(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Payload type label." ::= { plppE3CEntry 10 } plppE3CTxTrlTrcIdLen OBJECT-TYPE SYNTAX INTEGER { length-16(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Trail trace length for transmit and expected receive." ::= { plppE3CEntry 11 } plppE3CTxTrcIdUH OBJECT-TYPE SYNTAX PhysAddress (SIZE (8)) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit trail trace ID upper half." ::= { plppE3CEntry 12 } plppE3CTxTrcIdLH OBJECT-TYPE SYNTAX PhysAddress (SIZE (8)) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit trail trace ID lower half." ::= { plppE3CEntry 13 } plppE3CRxExTrcIdUH OBJECT-TYPE SYNTAX PhysAddress (SIZE (8)) ACCESS read-write STATUS mandatory DESCRIPTION "Receive expected trail trace ID upper half." ::= { plppE3CEntry 14 } plppE3CRxExTrcIdLH OBJECT-TYPE SYNTAX PhysAddress (SIZE (8)) ACCESS read-write STATUS mandatory DESCRIPTION "Receive expected trail trace ID lower half." ::= { plppE3CEntry 15 } --___________________________________________________________________________ -- The plpp E3-2C status table plppE3STable OBJECT-TYPE SYNTAX SEQUENCE OF PlppE3SEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The E3-2C status table for plpp." ::= { dv2PLPP 8 } plppE3SEntry OBJECT-TYPE SYNTAX PlppE3SEntry ACCESS not-accessible STATUS mandatory INDEX { plppE3SLinkNo } ::= { plppE3STable 1 } PlppE3SEntry ::= SEQUENCE { plppE3SLinkNo INTEGER, plppE3STXclock INTEGER, plppE3SRXclock INTEGER, plppE3STXCells Counter, plppE3SRXCells Counter, plppE3SHCSErrs Counter, plppE3SE3FrameErrs Counter, plppE3SPLCPFrameErrs Counter, plppE3SBIP8Errs Counter, plppE3SFEBEErrs Counter, plppE3SLcvs Counter, plppE3SLcd INTEGER, plppE3SRxTrlTrc PhysAddress, plppE3SRxAIS INTEGER, plppE3SRxOOF INTEGER, plppE3SRxLOS INTEGER, plppE3SRxLOF INTEGER, plppE3SRxFERF INTEGER, plppE3SPLCPRxLof INTEGER, plppE3SPLCPRxYellowAlarm INTEGER, plppE3SRxTrIdMis INTEGER, plppE3SRxTrIdUnst INTEGER, plppE3SRxPloadTypeLabMis INTEGER, plppE3SRxPloadTypeLabUnst INTEGER } plppE3SLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { plppE3SEntry 1 } plppE3STXclock OBJECT-TYPE SYNTAX INTEGER { down(2), up(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of TX clock for this link." ::= { plppE3SEntry 2 } plppE3SRXclock OBJECT-TYPE SYNTAX INTEGER { down(2), up(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of RX clock for this link." ::= { plppE3SEntry 3 } plppE3STXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The transmit cells count for this link." ::= { plppE3SEntry 4 } plppE3SRXCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The receive cells count for this link." ::= { plppE3SEntry 5 } plppE3SHCSErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The header checksum error count for this link." ::= { plppE3SEntry 6 } plppE3SE3FrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The E3 frame error count for this link." ::= { plppE3SEntry 7 } plppE3SPLCPFrameErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The PLCP frame error count for this link." ::= { plppE3SEntry 8 } plppE3SBIP8Errs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The BIP-8 error count for this link." ::= { plppE3SEntry 9 } plppE3SFEBEErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The FEBE error count for this link." ::= { plppE3SEntry 10 } plppE3SLcvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The E3 LCV count for this link." ::= { plppE3SEntry 11 } plppE3SLcd OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Loss of cell delineation." ::= { plppE3SEntry 12 } plppE3SRxTrlTrc OBJECT-TYPE SYNTAX PhysAddress (SIZE (16)) ACCESS read-only STATUS mandatory DESCRIPTION "Last received trail trace message." ::= { plppE3SEntry 13 } plppE3SRxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E3 AIS status." ::= { plppE3SEntry 14 } plppE3SRxOOF OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E3 OOF status." ::= { plppE3SEntry 15 } plppE3SRxLOS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E3 LOS status." ::= { plppE3SEntry 16 } plppE3SRxLOF OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E3 LOF status." ::= { plppE3SEntry 17 } plppE3SRxFERF OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive E3 FERF status." ::= { plppE3SEntry 18 } plppE3SPLCPRxLof OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The PLCP Rx LOF for this link." ::= { plppE3SEntry 19 } plppE3SPLCPRxYellowAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive PLCP Yellow Alarm status." ::= { plppE3SEntry 20 } plppE3SRxTrIdMis OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive trace id mismatch indication." ::= { plppE3SEntry 21 } plppE3SRxTrIdUnst OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive trace id unstable indication." ::= { plppE3SEntry 22 } plppE3SRxPloadTypeLabMis OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive payload type label mismatch indication." ::= { plppE3SEntry 23 } plppE3SRxPloadTypeLabUnst OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive payload type label unstable indication." ::= { plppE3SEntry 24 } -- ------------------------------------------------------------------------ -- Local Fibre configuration and status lFibreConfTable OBJECT-TYPE SYNTAX SEQUENCE OF LFibreConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains configuration information for the LFDOC." ::= { dv2LocalFibre 1 } lFibreConfEntry OBJECT-TYPE SYNTAX LFibreConfEntry ACCESS not-accessible STATUS mandatory INDEX { lFibreConfLinkNo } ::= { lFibreConfTable 1 } LFibreConfEntry ::= SEQUENCE { lFibreConfLinkNo INTEGER, lFibreConfLinkEnab INTEGER, lFibreConfCLine INTEGER, lFibreConfLoopback INTEGER } lFibreConfLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { lFibreConfEntry 1 } lFibreConfLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { lFibreConfEntry 2 } lFibreConfCLine OBJECT-TYPE SYNTAX INTEGER { processed(1), ignored(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to ignored(2) to stop control line processing for this link." ::= { lFibreConfEntry 3 } lFibreConfLoopback OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable loopback mode for this link." ::= { lFibreConfEntry 4 } --___________________________________________________________________________ -- The LF link status table lFibreStatTable OBJECT-TYPE SYNTAX SEQUENCE OF LFibreStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains status information for the LFDOC" ::= { dv2LocalFibre 2 } lFibreStatEntry OBJECT-TYPE SYNTAX LFibreStatEntry ACCESS not-accessible STATUS mandatory INDEX { lFibreStatLinkNo } ::= { lFibreStatTable 1 } LFibreStatEntry ::= SEQUENCE { lFibreStatLinkNo INTEGER, lFibreStatCLines INTEGER, lFibreStatHCSErrs Counter } lFibreStatLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { lFibreStatEntry 1 } lFibreStatCLines OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of control lines for this link." ::= { lFibreStatEntry 2 } lFibreStatHCSErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The header checksum error count for this link." ::= { lFibreStatEntry 3 } --___________________________________________________________________________ -- The DS Group -- DS1 DLIM ds1Table OBJECT-TYPE SYNTAX SEQUENCE OF Ds1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "ds1 Status Table" ::= { dv2DS 1 } ds1Entry OBJECT-TYPE SYNTAX Ds1Entry ACCESS not-accessible STATUS mandatory INDEX { ds1LinkNo } ::= { ds1Table 1 } Ds1Entry ::= SEQUENCE { ds1LinkNo INTEGER, ds1LineLength INTEGER, ds1Framing INTEGER, ds1Coding INTEGER, ds1Tr INTEGER, ds1Rt INTEGER, ds1LOSDefect INTEGER, ds1AISDefect INTEGER, ds1OOFDefect INTEGER, ds1YellowDefect INTEGER, ds1LOSAlarm INTEGER, ds1AISAlarm INTEGER, ds1LOFAlarm INTEGER, ds1YellowAlarm INTEGER, ds1PdvCount Counter, ds1Z16Count Counter, ds1LcvCount Counter, ds1BeeCount Counter, ds1FerCount Counter, ds1OofCount Counter, ds1ClrStats INTEGER, ds1Reconfig INTEGER, ds1LineES Counter, ds1LineSES Counter, ds1ES Counter, ds1SES Counter, ds1AISS Counter, ds1UAS Counter, ds1TxClkSel INTEGER, ds1ExBERDefect INTEGER, ds1ExBERAlarm INTEGER } ds1LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { ds1Entry 1 } ds1LineLength OBJECT-TYPE SYNTAX INTEGER { feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-feet(7), square(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Length of the line connected to the physical interface." ::= { ds1Entry 2 } ds1Framing OBJECT-TYPE SYNTAX INTEGER { none(1), sf(2), t1dm(3), slc96(4), esf4k(5), esf2k-3(6), esf2k-1(7) } ACCESS read-write STATUS mandatory DESCRIPTION "T1 Framing type." ::= { ds1Entry 3 } ds1Coding OBJECT-TYPE SYNTAX INTEGER { b8zs(1), ami(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The line code of incoming DS1 signal. ami(2) selects AMI line code." ::= { ds1Entry 4 } ds1Tr OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable transmit loop-back." ::= { ds1Entry 5 } ds1Rt OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable receive loop-back." ::= { ds1Entry 6 } ds1LOSDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss of Signal Defect" ::= { ds1Entry 7 } ds1AISDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS Defect" ::= { ds1Entry 8 } ds1OOFDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "OOF Defect" ::= { ds1Entry 9 } ds1YellowDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Yellow Defect" ::= { ds1Entry 10 } ds1LOSAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal alarm" ::= { ds1Entry 11 } ds1AISAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS alarm" ::= { ds1Entry 12 } ds1LOFAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Frame alarm" ::= { ds1Entry 13 } ds1YellowAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Yellow alarm" ::= { ds1Entry 14 } ds1PdvCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of pulse density violations detected." ::= { ds1Entry 15 } ds1Z16Count OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of 16 consecutive zeroes detected." ::= { ds1Entry 16 } ds1LcvCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of line code violations detected." ::= { ds1Entry 17 } ds1BeeCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of block error events detected." ::= { ds1Entry 18 } ds1FerCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of framing bit error events detected." ::= { ds1Entry 19 } ds1OofCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of out of frame events detected." ::= { ds1Entry 20 } ds1ClrStats OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear counters" DEFVAL { no } ::= { ds1Entry 21 } ds1Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { ds1Entry 22 } ds1LineES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { ds1Entry 23 } ds1LineSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { ds1Entry 24 } ds1ES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Errored Seconds" ::= { ds1Entry 25 } ds1SES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Seconds" ::= { ds1Entry 26 } ds1AISS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS Seconds" ::= { ds1Entry 27 } ds1UAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds" ::= { ds1Entry 28 } ds1TxClkSel OBJECT-TYPE SYNTAX INTEGER { local-oscillator(12), local-link(13) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit clock select." ::= { ds1Entry 29 } ds1ExBERDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Defect" ::= { ds1Entry 30 } ds1ExBERAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Alarm" ::= { ds1Entry 31 } -- DS3 DLIM ds3Table OBJECT-TYPE SYNTAX SEQUENCE OF Ds3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "ds3 Status Table" ::= { dv2DS 2 } ds3Entry OBJECT-TYPE SYNTAX Ds3Entry ACCESS not-accessible STATUS mandatory INDEX { ds3LinkNo } ::= { ds3Table 1 } Ds3Entry ::= SEQUENCE { ds3LinkNo INTEGER, ds3Lb INTEGER, ds3Err INTEGER, ds3RXLos INTEGER, ds3TXLoc INTEGER, ds3RXErr INTEGER, ds3RXAis INTEGER, ds3TXAis INTEGER, ds3TXLev INTEGER, ds3Tr INTEGER, ds3Rt INTEGER, ds3Equal INTEGER, ds3LOSAlarm INTEGER, ds3Reconfig INTEGER } ds3LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { ds3Entry 1 } ds3Lb OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Loop-back mode active." ::= { ds3Entry 2 } ds3Err OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS or BPV detected." ::= { ds3Entry 3 } ds3RXLos OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive loss of signal." ::= { ds3Entry 4 } ds3TXLoc OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmit loss of clock." ::= { ds3Entry 5 } ds3RXErr OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive error detected." ::= { ds3Entry 6 } ds3RXAis OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to generate a receive AIS alarm." ::= { ds3Entry 7 } ds3TXAis OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to transmit an AIS alarm." ::= { ds3Entry 8 } ds3TXLev OBJECT-TYPE SYNTAX INTEGER { normal(1), high(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit level." ::= { ds3Entry 9 } ds3Tr OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit loop-back." ::= { ds3Entry 10 } ds3Rt OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable receive loop-back." ::= { ds3Entry 11 } ds3Equal OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Equalisation type." ::= { ds3Entry 12 } ds3LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Integrated Alarm" ::= { ds3Entry 13 } ds3Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { ds3Entry 14 } -- E1-2C DLIM e1Table OBJECT-TYPE SYNTAX SEQUENCE OF E1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "E1-2C Config/Status Table" ::= { dv2DS 5 } e1Entry OBJECT-TYPE SYNTAX E1Entry ACCESS not-accessible STATUS mandatory INDEX { e1LinkNo } ::= { e1Table 1 } E1Entry ::= SEQUENCE { e1LinkNo INTEGER, e1LimType INTEGER, -- configurables e1Lb INTEGER, e1FRMRMode INTEGER, e1TxClkSel INTEGER, e1TS16PayLd INTEGER, e1TxAIS INTEGER, e1GappedClk INTEGER, e1IntrfType INTEGER, e1ClrStats INTEGER, e1Reconfig INTEGER, se1SA4 INTEGER, se1SA5 INTEGER, se1SA6 INTEGER, se1SA7 INTEGER, se1SA8 INTEGER, se1SI0 INTEGER, se1SI1 INTEGER, -- Defects e1LOSDefect INTEGER, e1OOFDefect INTEGER, e1AISDefect INTEGER, e1FerfDefect INTEGER, e1ExBERDefect INTEGER, -- Alarms e1LOSAlarm INTEGER, e1LOFAlarm INTEGER, e1AISAlarm INTEGER, e1FerfAlarm INTEGER, e1ExBERAlarm INTEGER, -- Error Counts e1SCRCErrs INTEGER, e1SFrameErrs INTEGER, e1SFEBEErrs INTEGER, e1SLcvs INTEGER, -- Performance Parameters e1LineES Counter, e1LineSES Counter, e1ES Counter, e1SES Counter, e1AISS Counter, e1UAS Counter } e1LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { e1Entry 1 } e1LimType OBJECT-TYPE SYNTAX INTEGER { dual(1), quad(2), dual-sig(3), quad-sig(4) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM I.D. type" ::= { e1Entry 2 } e1Lb OBJECT-TYPE SYNTAX INTEGER { none(1), line(2), payload(3), digital(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection" ::= { e1Entry 3 } e1FRMRMode OBJECT-TYPE SYNTAX INTEGER { crc-mfrm(1), basic(2), unframed(3) } ACCESS read-write STATUS mandatory DESCRIPTION "e1 Framing options." ::= { e1Entry 4 } e1TxClkSel OBJECT-TYPE SYNTAX INTEGER { system(11), loc-oscil(12), loc-link0(13), loc-link1(14), loc-link2(15), loc-link3(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit clock select." ::= { e1Entry 5 } e1TS16PayLd OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Employ TimeSlot 16 for customer data." ::= { e1Entry 6 } e1TxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the AIS State." ::= { e1Entry 7 } e1GappedClk OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Select 1,(yes) for Circuit-emulation." ::= { e1Entry 8 } e1IntrfType OBJECT-TYPE SYNTAX INTEGER { balanc-120(1), unbalan-75(2) } ACCESS read-write STATUS mandatory DESCRIPTION "E1 Framing options." ::= { e1Entry 9 } e1ClrStats OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Counters" ::= { e1Entry 10 } e1Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { e1Entry 11 } se1SA4 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Nat'l bit Sa4" DEFVAL { on } ::= { e1Entry 12 } se1SA5 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Nat'l bit Sa5" DEFVAL { on } ::= { e1Entry 13 } se1SA6 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Nat'l bit Sa6" DEFVAL { on } ::= { e1Entry 14 } se1SA7 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Nat'l bit Sa7" DEFVAL { on } ::= { e1Entry 15 } se1SA8 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Nat'l bit Sa8" DEFVAL { on } ::= { e1Entry 16 } se1SI0 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Int'l bit Si0" DEFVAL { on } ::= { e1Entry 17 } se1SI1 OBJECT-TYPE SYNTAX INTEGER { off(2), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Nat'l bit Si1" DEFVAL { on } ::= { e1Entry 18 } e1LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" ::= { e1Entry 22 } e1OOFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Out Of Frame" ::= { e1Entry 23 } e1AISDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive AIS Defect" ::= { e1Entry 24 } e1FerfDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Yellow Defect" ::= { e1Entry 25 } e1ExBERDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Defect" ::= { e1Entry 26 } e1LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Integrated Alarm" ::= { e1Entry 37 } e1LOFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Frame Integrated Alarm" ::= { e1Entry 38 } e1AISAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS Integrated Alarm" ::= { e1Entry 39 } e1FerfAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Yellow Integrated Alarm" ::= { e1Entry 40 } e1ExBERAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Alarm" ::= { e1Entry 41 } e1SCRCErrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The CRC-4 error count for this link." ::= { e1Entry 52 } e1SFrameErrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The frame error count for this link." ::= { e1Entry 53 } e1SFEBEErrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The FEBE error count for this link." ::= { e1Entry 54 } e1SLcvs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The E1 LCV count for this link." ::= { e1Entry 55 } e1LineES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { e1Entry 66 } e1LineSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { e1Entry 67 } e1ES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Errored Seconds" ::= { e1Entry 68 } e1SES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Seconds" ::= { e1Entry 69 } e1AISS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS Seconds" ::= { e1Entry 70 } e1UAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds" ::= { e1Entry 71 } -- SONET DLIM soTable OBJECT-TYPE SYNTAX SEQUENCE OF SoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SOLIM/DELIM Status Table" ::= { dv2DS 7 } soEntry OBJECT-TYPE SYNTAX SoEntry ACCESS not-accessible STATUS mandatory INDEX { soLinkNo } ::= { soTable 1 } SoEntry ::= SEQUENCE { soLinkNo INTEGER, soLimType INTEGER, soTimingRef INTEGER, soTxEn0 INTEGER, soTxEn1 INTEGER, soLimDesc INTEGER, soReconfig INTEGER } soLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { soEntry 1 } soLimType OBJECT-TYPE SYNTAX INTEGER { solim-v0(1), solim-v1(2), solim-v2(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Solim version" ::= { soEntry 2 } soTimingRef OBJECT-TYPE SYNTAX INTEGER { system(11), local-oscillator(12), local-link0(13), local-link1(14) } ACCESS read-write STATUS mandatory DESCRIPTION "Local timing reference" ::= { soEntry 3 } soTxEn0 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 0 Tx Enable (v2 and above)" DEFVAL { yes } ::= { soEntry 4 } soTxEn1 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 1 Tx Enable (v2 and above)" DEFVAL { yes } ::= { soEntry 5 } soLimDesc OBJECT-TYPE SYNTAX INTEGER { pre-system-timing(1), dual-intermediate-reach(2), single-intermediate-reach(3), dual-short-reach(4), single-short-reach(5), dual-long-reach(6), single-long-reach(7), dual-hybrid-intermediate(8), dual-hybrid-long(9), dual-electrical(10) } ACCESS read-write STATUS mandatory DESCRIPTION "LIM Description" DEFVAL { dual-intermediate-reach } ::= { soEntry 6 } soReconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { soEntry 7 } -- DS1-xC DLIM ds1V2Table OBJECT-TYPE SYNTAX SEQUENCE OF Ds1V2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "ds1 V2 Status Table" ::= { dv2DS 9 } ds1V2Entry OBJECT-TYPE SYNTAX Ds1V2Entry ACCESS not-accessible STATUS mandatory INDEX { ds1V2LinkNo } ::= { ds1V2Table 1 } Ds1V2Entry ::= SEQUENCE { ds1V2LinkNo INTEGER, ds1V2LimType INTEGER, -- configurables ds1V2TxLineLn INTEGER, ds1V2FRMRMode INTEGER, ds1V2Coding INTEGER, ds1V2Lb INTEGER, ds1V2TxAIS INTEGER, ds1V2GappedClk INTEGER, ds1V2TxClkSel INTEGER, ds1V2ClrStats INTEGER, ds1V2Reconfig INTEGER, -- Defects ds1V2LOSDefect INTEGER, ds1V2OOFDefect INTEGER, ds1V2AISDefect INTEGER, ds1V2FerfDefect INTEGER, ds1V2BERDefect INTEGER, -- Alarms ds1V2LOSAlarm INTEGER, ds1V2LOFAlarm INTEGER, ds1V2AISAlarm INTEGER, ds1V2FerfAlarm INTEGER, ds1V2BERAlarm INTEGER, -- Error Counts ds1V2FerCount INTEGER, ds1V2BeeCount INTEGER, ds1V2OCfCount INTEGER, ds1V2LcvCount INTEGER, -- pkc added BER -- Performance parameters ds1V2LineES Counter, ds1V2LineSES Counter, ds1V2ES Counter, ds1V2SES Counter, ds1V2AISS Counter, ds1V2UAS Counter, ds1V2ExBER Counter } ds1V2LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { ds1V2Entry 1 } ds1V2LimType OBJECT-TYPE SYNTAX INTEGER { ds1-dual(1), ds1-quad(2), ds1-dual-signaling(3), ds1-quad-signaling(4) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM I.D. type" ::= { ds1V2Entry 2 } ds1V2TxLineLn OBJECT-TYPE SYNTAX INTEGER { feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-feet(7), square(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Select txmt line length." ::= { ds1V2Entry 3 } ds1V2FRMRMode OBJECT-TYPE SYNTAX INTEGER { none(1), sf(2), t1dm(3), slc96(4), esf4k(5), esf2K-3(6), esf2k-1(7) } ACCESS read-write STATUS mandatory DESCRIPTION "ds1V2 Framing options." ::= { ds1V2Entry 4 } ds1V2Coding OBJECT-TYPE SYNTAX INTEGER { b8zs(2), ami(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If Line Coding is yes(1), AMI is selected" ::= { ds1V2Entry 5 } ds1V2Lb OBJECT-TYPE SYNTAX INTEGER { none(1), line-lpbk(2), payload-lpbk(3), digital-lpbk(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection" ::= { ds1V2Entry 6 } ds1V2TxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the AIS State." ::= { ds1V2Entry 7 } ds1V2GappedClk OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Select 1,(yes) for Circuit-emulation." ::= { ds1V2Entry 8 } ds1V2TxClkSel OBJECT-TYPE SYNTAX INTEGER { system(11), local-oscillator(12), local-link0(13), local-link1(14), local-link2(15), local-link3(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit clock select." ::= { ds1V2Entry 9 } ds1V2ClrStats OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Counters" ::= { ds1V2Entry 10 } ds1V2Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { ds1V2Entry 11 } ds1V2LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" ::= { ds1V2Entry 22 } ds1V2OOFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Out Of Frame" ::= { ds1V2Entry 23 } ds1V2AISDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive AIS Defect" ::= { ds1V2Entry 24 } ds1V2FerfDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive FERF(Yellow) Defect" ::= { ds1V2Entry 25 } ds1V2BERDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Defect" ::= { ds1V2Entry 26 } ds1V2LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Integrated Alarm" ::= { ds1V2Entry 37 } ds1V2LOFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Frame Integrated Alarm" ::= { ds1V2Entry 38 } ds1V2AISAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS Integrated Alarm" ::= { ds1V2Entry 39 } ds1V2FerfAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Yellow Integrated Alarm" ::= { ds1V2Entry 40 } ds1V2BERAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Alarm" ::= { ds1V2Entry 41 } ds1V2FerCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The framing bit error count for this link." ::= { ds1V2Entry 52 } ds1V2BeeCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bit error count for this link." ::= { ds1V2Entry 53 } ds1V2OCfCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Out-of-frame or Change of Frame alignment error count for this link." ::= { ds1V2Entry 54 } ds1V2LcvCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The DS1 Line code violations count for this link." ::= { ds1V2Entry 55 } ds1V2LineES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { ds1V2Entry 66 } ds1V2LineSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { ds1V2Entry 67 } ds1V2ES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Errored Seconds" ::= { ds1V2Entry 68 } ds1V2SES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Seconds" ::= { ds1V2Entry 69 } ds1V2AISS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS Seconds" ::= { ds1V2Entry 70 } ds1V2UAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds" ::= { ds1V2Entry 71 } -- pkc added for ds1_2c ds1V2ExBER OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate" ::= { ds1V2Entry 72 } dlimLpbkTimeout OBJECT-TYPE SYNTAX INTEGER (1..604800) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to set the dlim loopback timeout in minutes." ::= { dv2DS 10 } -- DS3-2C DLIM --ds3V2Table OBJECT-TYPE -- SYNTAX SEQUENCE OF Ds3V2Entry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "ds3-2C Config/Status Table" -- ::= { dv2DS 4 } ds3V2Table OBJECT-TYPE SYNTAX SEQUENCE OF Ds3V2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "ds3-2C Config/Status Table" ::= { dv2DS 11 } ds3V2Entry OBJECT-TYPE SYNTAX Ds3V2Entry ACCESS not-accessible STATUS mandatory INDEX { ds3V2LinkNo } ::= { ds3V2Table 1 } Ds3V2Entry ::= SEQUENCE { ds3V2LinkNo INTEGER, ds3V2Lb INTEGER, ds3V2LimType INTEGER, ds3V2LimOK INTEGER, ds3V2TxLBO INTEGER, ds3V2TxClkSel INTEGER, ds3V2LOSDefect INTEGER, ds3V2LOSAlarm INTEGER, ds3V2Reconfig INTEGER } ds3V2LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { ds3V2Entry 1 } ds3V2Lb OBJECT-TYPE SYNTAX INTEGER { none(2), line-lpbk(1), local-lpbk(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Active" ::= { ds3V2Entry 2 } ds3V2LimType OBJECT-TYPE SYNTAX INTEGER { ds3-2c(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM I.D. type" ::= { ds3V2Entry 3 } ds3V2LimOK OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM OK." ::= { ds3V2Entry 4 } ds3V2TxLBO OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit line build-out,(1)for short cables." ::= { ds3V2Entry 5 } ds3V2TxClkSel OBJECT-TYPE SYNTAX INTEGER { system(11), local-oscillator(12), link0-plcp(17), link1-plcp(18) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit clock select." ::= { ds3V2Entry 6 } ds3V2LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" ::= { ds3V2Entry 8 } ds3V2LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Alarm" ::= { ds3V2Entry 9 } ds3V2Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { ds3V2Entry 10 } -- -- E3-2C DLIM --e3Table OBJECT-TYPE -- SYNTAX SEQUENCE OF E3Entry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "E3-2C Config/Status Table" -- ::= { dv2DS 6 } e3Table OBJECT-TYPE SYNTAX SEQUENCE OF E3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "E3-2C Config/Status Table" ::= { dv2DS 12 } e3Entry OBJECT-TYPE SYNTAX E3Entry ACCESS not-accessible STATUS mandatory INDEX { e3LinkNo } ::= { e3Table 1 } E3Entry ::= SEQUENCE { e3LinkNo INTEGER, e3LimType INTEGER, e3LimOK INTEGER, e3EQSelect INTEGER, e3Loopback INTEGER, e3TxAIS INTEGER, e3TxClkSel INTEGER, e3LOSDefect INTEGER, e3LOSAlarm INTEGER, e3Reconfig INTEGER } e3LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { e3Entry 1 } e3LimType OBJECT-TYPE SYNTAX INTEGER { e3-2c(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM I.D. type" ::= { e3Entry 2 } e3LimOK OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM OK." ::= { e3Entry 3 } e3EQSelect OBJECT-TYPE SYNTAX INTEGER { auto(1), set-0-to-3p5-dB(2), set-2p6-to-8-dB(3), set-6-to-9p9-dB(4), set-8p6-to-13p2-dB(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Rx Line Equalization select." ::= { e3Entry 4 } e3Loopback OBJECT-TYPE SYNTAX INTEGER { none(3), line-lpbk(1), local-lpbk(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback LIU." ::= { e3Entry 6 } e3TxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit AIS." ::= { e3Entry 7 } e3TxClkSel OBJECT-TYPE SYNTAX INTEGER { system(11), local-oscillator(12), local-link0(13), local-link1(14) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit clock select." ::= { e3Entry 8 } e3LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" ::= { e3Entry 9 } e3LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Alarm" ::= { e3Entry 10 } e3Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { e3Entry 11 } -- HSSI DLIM -- Depricate old HSSI table --hssiTable OBJECT-TYPE -- SYNTAX SEQUENCE OF HssiEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "hssi Status Table" -- ::= { dv2DS 3 } -- --hssiTable OBJECT-TYPE -- SYNTAX SEQUENCE OF HssiEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "hssi Status Table" -- ::= { dv2DS 8 } hssiTable OBJECT-TYPE SYNTAX SEQUENCE OF HssiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "hssi Status Table" ::= { dv2DS 13 } hssiEntry OBJECT-TYPE SYNTAX HssiEntry ACCESS not-accessible STATUS mandatory INDEX { hssiLinkNo } ::= { hssiTable 1 } HssiEntry ::= SEQUENCE { hssiLinkNo INTEGER, hssiType INTEGER, hssiLimType INTEGER, hssiLinkReady INTEGER, hssiRemoteReady INTEGER, hssiClockSrc INTEGER, hssiLocalLoopback INTEGER, hssiRemoteLoopback INTEGER, hssiCtrTestMode INTEGER, hssiReconfig INTEGER, hssiLOSDefect INTEGER, hssiLOSAlarm INTEGER } hssiLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { hssiEntry 1 } hssiLocalLoopback OBJECT-TYPE SYNTAX INTEGER { none(1), line(2), internal(3), bilateral(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Local Loopback." DEFVAL { none } ::= { hssiEntry 2 } hssiRemoteLoopback OBJECT-TYPE SYNTAX INTEGER { none(1), line(2), digital(3), remote-line(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Remote Loopback." DEFVAL { none } ::= { hssiEntry 3 } hssiReconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { hssiEntry 4 } hssiType OBJECT-TYPE SYNTAX INTEGER { dte(1), dce(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of link." ::= { hssiEntry 15 } hssiLimType OBJECT-TYPE SYNTAX INTEGER { hssi-v1(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM Version" ::= { hssiEntry 16 } hssiClockSrc OBJECT-TYPE SYNTAX INTEGER { local(1), from-dce(2), local-45Mbps(3), local-34Mbps(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Source of clock. Note that for a DCE, from-DCE(4) should not be selected." ::= { hssiEntry 17 } hssiCtrTestMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Test Mode." DEFVAL { off } ::= { hssiEntry 18 } hssiLinkReady OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if link is ready." DEFVAL { no } ::= { hssiEntry 19 } hssiRemoteReady OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if remote link is ready." DEFVAL { no } ::= { hssiEntry 20 } hssiLOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" DEFVAL { no } ::= { hssiEntry 25 } hssiLOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Alarm" DEFVAL { no } ::= { hssiEntry 30 } -- J2-xC DLIM j2Table OBJECT-TYPE SYNTAX SEQUENCE OF J2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "J2 Config/Status Table" ::= { dv2DS 14 } j2Entry OBJECT-TYPE SYNTAX J2Entry ACCESS not-accessible STATUS mandatory INDEX { j2LinkNo } ::= { j2Table 1 } J2Entry ::= SEQUENCE { j2LinkNo INTEGER, -- j2LimType -- INTEGER, j2FirmwareRev INTEGER, -- configurables j2TxEq INTEGER, j2Lb INTEGER, j2TxAIS INTEGER, -- j2GappedClk -- INTEGER, j2TxClkSel INTEGER, j2ClrStats INTEGER, j2Reconfig INTEGER, j2TS97TS98 Hex, j2QualClock INTEGER, -- Defects j2LOSDefect INTEGER, j2OOFDefect INTEGER, j2AISDefect INTEGER, j2RAlmDefect INTEGER, -- Alarms j2LOSAlarm INTEGER, j2LOFAlarm INTEGER, j2AISAlarm INTEGER, j2RAlmAlarm INTEGER, -- Error Counts j2FerCount INTEGER, j2RAlmCount INTEGER, -- j2OCfCount -- INTEGER, j2LcvCount INTEGER, j2CrcCount Counter, -- Performance parameters j2LineES Counter, j2LineSES Counter, j2ES Counter, j2SES Counter, j2AISS Counter, j2UAS Counter } j2LinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { j2Entry 1 } -- --j2LimType OBJECT-TYPE -- SYNTAX INTEGER -- { -- j2-dual(1), -- j2-quad(2) -- } -- ACCESS read-only -- STATUS obsoleted -- DESCRIPTION -- "LIM I.D. type" -- ::= { j2Entry 2 } j2FirmwareRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Firmware Revision" ::= { j2Entry 3 } j2TxEq OBJECT-TYPE SYNTAX INTEGER { low-dB(1), high-dB(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Select equalizer setting" ::= { j2Entry 4 } j2Lb OBJECT-TYPE SYNTAX INTEGER { none(1), liu-line(2), j2-Framer-Payload(3), j2-Framer-Digital(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection" ::= { j2Entry 6 } j2TxAIS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the AIS State." ::= { j2Entry 7 } --j2GappedClk OBJECT-TYPE -- SYNTAX INTEGER -- { -- non-gapped(1), -- atm(2) -- } -- ACCESS read-write -- STATUS obsoleted -- DESCRIPTION -- "ATM mode gaps channels 97-98 and framing bits." -- DEFVAL { 2 } -- ::= { j2Entry 8 } j2TxClkSel OBJECT-TYPE SYNTAX INTEGER { system-bus(11), int-oscillator(12), link-0(13), link-1(14) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit clock select." ::= { j2Entry 9 } j2ClrStats OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Counters" ::= { j2Entry 10 } j2Reconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { j2Entry 11 } j2TS97TS98 OBJECT-TYPE SYNTAX Hex ACCESS read-write STATUS mandatory DESCRIPTION "Set the value (in hex) of the bytes to be transmitted in time slots 97 and 98 of the J2 frame." DEFVAL { 65535 } ::= { j2Entry 12 } j2QualClock OBJECT-TYPE SYNTAX INTEGER { low-Primary(1), low-Secondary(2), high-Primary(3), high-Secondary(4), local-Oscillator(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Quality of Clock Selection" DEFVAL { low-Primary } ::= { j2Entry 20 } j2LOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" ::= { j2Entry 22 } j2OOFDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive Out Of Frame" ::= { j2Entry 23 } j2AISDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive AIS Defect" ::= { j2Entry 24 } j2RAlmDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote Alarm Defect" ::= { j2Entry 26 } j2LOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Integrated Alarm" ::= { j2Entry 37 } j2LOFAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Frame Integrated Alarm" ::= { j2Entry 38 } j2AISAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS Integrated Alarm" ::= { j2Entry 39 } j2RAlmAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote Alarm Condition" ::= { j2Entry 41 } j2FerCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The framing bit error count for this link." ::= { j2Entry 52 } j2RAlmCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Remote Alarm error count for this link." ::= { j2Entry 53 } --j2OCfCount OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS obsoleted -- DESCRIPTION -- "The Out-of-frame or Change of Frame alignment error count for -- this link." -- ::= { j2Entry 54 } j2LcvCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The J2 Line code violations count for this link." ::= { j2Entry 55 } j2CrcCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of J2 muliframes received with CRC errors" ::= { j2Entry 56 } j2LineES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { j2Entry 66 } j2LineSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { j2Entry 67 } j2ES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Errored Seconds" ::= { j2Entry 68 } j2SES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Seconds" ::= { j2Entry 69 } j2AISS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS Seconds" ::= { j2Entry 70 } j2UAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds" ::= { j2Entry 71 } -- SCF-xC DLIM SI (SCF) start scfTable OBJECT-TYPE SYNTAX SEQUENCE OF ScfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SCF Config/Status Table" ::= { dv2DS 15 } scfEntry OBJECT-TYPE SYNTAX ScfEntry ACCESS not-accessible STATUS mandatory INDEX { scfLinkNo } ::= { scfTable 1 } ScfEntry ::= SEQUENCE { scfLinkNo INTEGER, scfLimType INTEGER, scfFirmwareRev INTEGER, scfQualClock INTEGER, -- configurables scfContr INTEGER, scfDCEDTE INTEGER, scfLb INTEGER, scfLineTiming INTEGER, scfDataRate INTEGER, scfClkSel INTEGER, scfInterfaceType INTEGER, scfReconfig INTEGER, -- Defects scfLOSDefect INTEGER, -- Alarms scfLOSAlarm INTEGER } scfLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number - this is the instance." ::= { scfEntry 1 } scfLimType OBJECT-TYPE SYNTAX INTEGER { si-dual(1), si-quad(2) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM I.D. type" ::= { scfEntry 2 } scfFirmwareRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Firmware Revision" ::= { scfEntry 3 } scfQualClock OBJECT-TYPE SYNTAX INTEGER { low-Primary(1), low-Secondary(2), high-Primary(3), high-Secondary(4), local-Oscillator(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Quality of Clock Selection" DEFVAL { low-Primary } ::= { scfEntry 4 } scfContr OBJECT-TYPE SYNTAX INTEGER { ce-hpg-hc2(1), ms-ms2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controller Selection" DEFVAL { ce-hpg-hc2 } ::= { scfEntry 5 } scfDCEDTE OBJECT-TYPE SYNTAX INTEGER { dce(1), dte(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DCE or DTE Selection" DEFVAL { dce } ::= { scfEntry 6 } scfLb OBJECT-TYPE SYNTAX INTEGER { none(1), line(2), link(3), digital(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Loopback Selection" DEFVAL { line } ::= { scfEntry 7 } scfLineTiming OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive Line Timing Selection" DEFVAL { enabled } ::= { scfEntry 8 } scfDataRate OBJECT-TYPE SYNTAX INTEGER { rate-2x4(1), rate-4x8(2), rate-7x2(3), rate-9x6(4), rate-14x4(5), rate-16x0(6), rate-16x6(7), rate-19x2(8), rate-28x8(9), rate-32x0(10), rate-38x4(11), rate-48x0(12), rate-50x0(13), rate-56x0(14), rate-57x6(15), rate-64x0(16), rate-76x8(17), rate-96x0(18), rate-112x0(19), rate-115x2(20), rate-128x0(21), rate-144x0(22), rate-153x6(23), rate-192x0(24), rate-224x0(25), rate-230x0(26), rate-256x0(27), rate-288x0(28), rate-307x2(29), rate-320x0(30), rate-384x0(31), rate-448x0(32), rate-512x0(33), rate-768x0(34), rate-1024x0(35), rate-1536x0(36), rate-1920x0(37), rate-2048x0(38), rate-3072x0(39), rate-4096x0(40), rate-6144x0(41), rate-8192x0(42) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Rate Selection in K Bit/Sec" DEFVAL { rate-2x4 } ::= { scfEntry 9 } scfClkSel OBJECT-TYPE SYNTAX INTEGER { system(1), localOscillator(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clock select" DEFVAL { system } ::= { scfEntry 10 } scfInterfaceType OBJECT-TYPE SYNTAX INTEGER { x21(1), rs449(2), eia530-A(3), v35(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Interface type selection" DEFVAL { x21 } ::= { scfEntry 11 } scfReconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reconfigure Link" DEFVAL { no } ::= { scfEntry 12 } scfLOSDefect OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Defect" ::= { scfEntry 13 } scfLOSAlarm OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss Of Signal Integrated Alarm" ::= { scfEntry 14 } -- SI (SCF) end --___________________________________________________________________________ -- The Billing Group -- 1/5/98 Pat Cassella Added Deutsche TelKom SVC billing enhancements. Search for -- Paul Burden "DT change". -- Mathi Packiam -- Define the BillControl data type. DT change. -- BillControl ::= INTEGER {disabled(1), enabled(2), deleteAll(3) } -- disabled: default/startup state. -- No new bills are created. -- Bills are not updated (any existing bills remain). -- enabled: Bills are updated at the specified interval. -- If an existing circuit has no bill, one is created. -- New bills are created as circuits are established. -- deleteAll: Existing bills are deleted. -- After the bills are deleted, reverts to disabled(1). billAvailable OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of billing records available." ::= { dv2Billing 1 } --billLogToDisk OBJECT-TYPE -- SYNTAX INTEGER { -- no(2), -- yes(1) -- } -- ACCESS read-only -- STATUS obsolete -- DESCRIPTION -- "If set to yes(1) then records are written to the local file . You should not normally leave this turned on." -- ::= { dv2Billing 2 } billingTable OBJECT-TYPE SYNTAX SEQUENCE OF BillingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to contain billing records." ::= { dv2Billing 3 } billingEntry OBJECT-TYPE SYNTAX BillingEntry ACCESS not-accessible STATUS mandatory INDEX { billSeq } ::= { billingTable 1 } BillingEntry ::= SEQUENCE { billSeq INTEGER, billSvpi VirtualPathIdentifier, billSvci VirtualCircuitIdentifier, billDvpi VirtualPathIdentifier, billDvci VirtualCircuitIdentifier, billSslot INTEGER, billSlink INTEGER, billDslot INTEGER, billDlink INTEGER, billCalled E164, billCalledSub E164SUB, billCalling E164, billCallingSub E164SUB, billCellInC Counter, billCellIn Counter, billFrameIn Counter, billByteInC Counter, billByteIn Counter, billCellOutC Counter, billCellOut Counter, billFrameOut Counter, billByteOutC Counter, billByteOut Counter, -- billClass has been replaced with billFwdQOS and billBwdQOS. DT change. -- billClass -- INTEGER, billCause INTEGER, -- Y2K change -- billStart -- DateTimeString, -- Y2K change -- billEnd -- DateTimeString, billValid INTEGER, billCLP1OutC Counter, billCLP1Out Counter, billTag INTEGER, -- Y2K change : added, use DateAndTime convention billStartM2 DateAndTime, -- Y2K change : added, use DateAndTime convention billEndM2 DateAndTime, -- The following changes for PCR,SCR,MBS,and QOS (entry 34 through 41) are per Deutsche -- TeleKom upgrade request. DT change. billFwdPCR INTEGER, billBwdPCR INTEGER, billFwdSCR INTEGER, billBwdSCR INTEGER, billFwdMBS INTEGER, billBwdMBS INTEGER, billFwdQOS INTEGER, billBwdQOS INTEGER } billSeq OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "billing record sequence number." ::= { billingEntry 1 } billSvpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Source Virtual Path Identifier for VC." ::= { billingEntry 2 } billSvci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Source Virtual Circuit Identifier for VC." ::= { billingEntry 3 } billDvpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Destination Virtual Path Identifier for VC." ::= { billingEntry 4 } billDvci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Destination Virtual Circuit Identifier for VC." ::= { billingEntry 5 } billSslot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Source slot for VC." ::= { billingEntry 6 } billSlink OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Source link for VC." ::= { billingEntry 7 } billDslot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Destination slot for VC." ::= { billingEntry 8 } billDlink OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Destination link for VC." ::= { billingEntry 9 } billCalled OBJECT-TYPE SYNTAX E164 ACCESS read-only STATUS mandatory DESCRIPTION "Called or Destination E.164 address." ::= { billingEntry 10 } billCalledSub OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "Called or Destination E.164 sub-address." ::= { billingEntry 11 } billCalling OBJECT-TYPE SYNTAX E164 ACCESS read-only STATUS mandatory DESCRIPTION "Calling or Originating E.164 address." ::= { billingEntry 12 } billCallingSub OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "Calling or Originating E.164 sub-address." ::= { billingEntry 13 } billCellInC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cell in overflows count." ::= { billingEntry 14 } billCellIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cell in count." ::= { billingEntry 15 } billFrameIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frame in count." ::= { billingEntry 16 } billByteInC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Byte in overflows count." ::= { billingEntry 17 } billByteIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Byte in count." ::= { billingEntry 18 } billCellOutC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cell out overflows count." ::= { billingEntry 19 } billCellOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cell out count." ::= { billingEntry 20 } billFrameOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frame out count." ::= { billingEntry 21 } billByteOutC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Byte out overflows count." ::= { billingEntry 22 } billByteOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Byte out count." ::= { billingEntry 23 } -- billClass has been deprecated and replaced with billFwdQOS and billBwdQOS. DT change. -- billClass OBJECT-TYPE -- SYNTAX INTEGER { -- ubr(0), -- cbr(1), -- vbr-high(2), -- vbr-med(3), -- vbr-low(4) -- } -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Call class." -- ::= { billingEntry 24 } billCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Clear cause code." ::= { billingEntry 25 } -- Y2K change : deprecated --billStart OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Call start date-time." -- ::= { billingEntry 26 } -- -- Y2K change : deprecated --billEnd OBJECT-TYPE -- SYNTAX DateTimeString -- ACCESS read-only -- STATUS deprecated -- DESCRIPTION -- "Call end date-time." -- ::= { billingEntry 27 } billValid OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2), block-invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Deletes billing record Entry by setting to invalid(2)." ::= { billingEntry 28 } billCLP1OutC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CLP1 out overflows count." ::= { billingEntry 29 } billCLP1Out OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CLP1 out count." ::= { billingEntry 30 } billTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This identifies the billable SVC." ::= { billingEntry 31 } -- Y2K change : use DateAndTime convention billStartM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "Call start date-time." ::= { billingEntry 32 } -- Y2K change : use DateAndTime convention billEndM2 OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "Call end date-time." ::= { billingEntry 33 } -- The following changes for PCR,SCR,MBS,and QOS (entry 34 through 41) are per Deutsche -- TeleKom upgrade request. DT change. --New. DT change. billFwdPCR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC Forward Peak Cell Rate." ::= { billingEntry 34 } --New. DT change. billBwdPCR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC Backward Peak Cell Rate." ::= { billingEntry 35 } billFwdSCR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC Forward Sustained Cell Rate." ::= { billingEntry 36 } --New. DT change. billBwdSCR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC Backward Sustained Cell Rate." ::= { billingEntry 37 } --New. DT change. billFwdMBS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC Forward Maximum Burst Size." ::= { billingEntry 38 } --New. DT change. billBwdMBS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC Backward Maximum Burst Size." ::= { billingEntry 39 } --Modified. DT change. -- modified for compiler: ubrBe(0) removed - nws billFwdQOS OBJECT-TYPE SYNTAX INTEGER { qos1(1), qos2(2), qos3(3), qos4(4), abr(6), cbr(7), vbrRt(8), vbrNrt(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Forward Quality of Service." ::= { billingEntry 40 } --Modified. DT change. -- modified for compiler: ubrBe(0) removed - nws billBwdQOS OBJECT-TYPE SYNTAX INTEGER { qos1(1), qos2(2), qos3(3), qos4(4), abr(6), cbr(7), vbrRt(8), vbrNrt(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Backward Quality of Service." ::= { billingEntry 41 } -- Later: Obsolete and replace with BillControlEntry - seperate control for svc,spvc,pvc. DT change. billingControl OBJECT-TYPE SYNTAX INTEGER { stop-billing-process(1), start-SPVC-billing-process(2), start-PVC-billing-process(3), start-SPVC-and-PVC-billing(4), delete-all-billing-records(5), start-SVC-billing-process(6), start-SVC-and-PVC-billing(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is set to start SPVC/PVC process." ::= { dv2Billing 4 } -- Obsolete old Billing period definition. DT change. -- billingPeriod OBJECT-TYPE -- SYNTAX INTEGER (10..604800) -- ACCESS read-write -- STATUS deprecated -- DESCRIPTION -- "This parameter is used to set the billing period in seconds." -- ::= { dv2Billing 5 } --Obsolete the unused field. --billRecordControl OBJECT-TYPE -- SYNTAX INTEGER { -- bill-update-record(1) -- } -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "This object is set to update or add new billing record." -- DEFVAL { bill-update-record } -- ::= { dv2Billing 6 } billLost OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Lost of billing record count." ::= { dv2Billing 7 } -- Later: Obsolete and replace with BillControlEntry - billLinkNo. DT change. billLinks OBJECT-TYPE SYNTAX INTEGER { link0(1), link1(2), all(255) } ACCESS read-write STATUS mandatory DESCRIPTION "This value is bitwise billing link control." ::= { dv2Billing 8 } billTrapControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is set to enable or disable billing traps" ::= { dv2Billing 9 } billDirControl OBJECT-TYPE SYNTAX INTEGER { uni-direction(1), bi-direction(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is selected for uni-direction billing or bi-direction billing." ::= { dv2Billing 10 } --billRecLostReset OBJECT-TYPE -- SYNTAX INTEGER { -- yes(1), -- no(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "reset for billing records lost field" -- DEFVAL { no } -- ::= { dv2Billing 11 } -- New Billing period definition via Kiran Mistry. DT change. billingInterval OBJECT-TYPE SYNTAX INTEGER { period15min(1), period30min(2), period60min(3), period120min(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to set the billing period in 15/30/60/120 minute intervals" ::= { dv2Billing 12 } --New. DT change. -- billControlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF BillControlEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "This table contains flags to control the billing on each link" -- ::= { dv2Billing 13 } --New. DT change. -- billControlEntry OBJECT-TYPE -- SYNTAX BillControlEntry -- ACCESS not-accessible -- STATUS mandatory -- INDEX { billLinkNo } -- ::= { billControlTable 1 } --New. DT change. -- BillControlEntry ::= -- SEQUENCE { -- billLinkNo -- INTEGER, -- billPvcControl -- INTEGER, -BillControl -- billSvcControl -- INTEGER, -BillControl -- billSPvcControl -- INTEGER -BillControl -- } --New. DT change. -- billLinkNo OBJECT-TYPE -- SYNTAX INTEGER (0..3) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Link number, starting at 0." -- ::= { BillControlEntry 1 } --New. DT change. -- billPvcControl OBJECT-TYPE -- SYNTAX INTEGER { -- disabled(1), -- enabled(2), -- deleteAll(3) -- } - BillControl type -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Flag to control PVC billing." -- ::= { BillControlEntry 2 } --New. DT change. -- billSvcControl OBJECT-TYPE -- SYNTAX INTEGER { -- disabled(1), -- enabled(2), -- deleteAll(3) -- } - BillControl type -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Flag to control SVC billing." -- ::= { BillControlEntry 3 } --New. DT change. -- billSPvcControl OBJECT-TYPE -- SYNTAX INTEGER { disabled(1), enabled(2), deleteAll(3) } - BillControl type -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Flag to control SPVC billing." -- ::= { BillControlEntry 4 } --___________________________________________________________________________ --The QEDOC Group qeDocMacAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "MAC address of Ethernet ports." ::= { dv2QeDoc 1 } qeDocTunRetryPeriod OBJECT-TYPE SYNTAX INTEGER (5..60) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds between retries of tunnel establishment." ::= { dv2QeDoc 2 } qeDocTunIdlePeriod OBJECT-TYPE SYNTAX INTEGER (5..3600) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds to wait without activity before clearing tunnel call." ::= { dv2QeDoc 3 } qeDocBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF QeDocBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to statistics and control for the bridges." ::= { dv2QeDoc 4 } qeDocBridgeEntry OBJECT-TYPE SYNTAX QeDocBridgeEntry ACCESS not-accessible STATUS mandatory INDEX { qeDocBridgeLinkNo } ::= { qeDocBridgeTable 1 } QeDocBridgeEntry ::= SEQUENCE { qeDocBridgeLinkNo INTEGER, qeDocBridgeEnable INTEGER, qeDocBridgeLink0Eligible INTEGER, qeDocBridgeLink1Eligible INTEGER, qeDocBridgeLink2Eligible INTEGER, qeDocBridgeLink3Eligible INTEGER } qeDocBridgeLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number." ::= { qeDocBridgeEntry 1 } qeDocBridgeEnable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable MAC bridging." ::= { qeDocBridgeEntry 2 } qeDocBridgeLink0Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 0 eligible for frames" ::= { qeDocBridgeEntry 3 } qeDocBridgeLink1Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 1 eligible for frames" ::= { qeDocBridgeEntry 4 } qeDocBridgeLink2Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 2 eligible for frames" ::= { qeDocBridgeEntry 5 } qeDocBridgeLink3Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 3 eligible for frames" ::= { qeDocBridgeEntry 6 } --___________________________________________________________________________ -- The Tunnel Management Table qeDocTunTable OBJECT-TYPE SYNTAX SEQUENCE OF QeDocTunEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to establish and control tunnels set-up using SVCs." ::= { dv2QeDoc 6 } qeDocTunEntry OBJECT-TYPE SYNTAX QeDocTunEntry ACCESS not-accessible STATUS mandatory INDEX { qeDocTunIndex } ::= { qeDocTunTable 1 } QeDocTunEntry ::= SEQUENCE { qeDocTunIndex INTEGER, qeDocTunName DisplayString, qeDocTunType INTEGER, qeDocTunState INTEGER, qeDocTunCallState INTEGER, qeDocTunVPI VirtualPathIdentifier, qeDocTunVCI VirtualCircuitIdentifier, qeDocTunPriority INTEGER, qeDocTunSlot INTEGER, qeDocTunLink INTEGER, qeDocTunInFrames Counter, qeDocTunOutFrames Counter, qeDocTunRemNet IpAddress, qeDocTunRemMask IpAddress, qeDocTunLocNet IpAddress, qeDocTunLocMask IpAddress, qeDocTunRemStartSkt INTEGER, qeDocTunRemEndSkt INTEGER, qeDocTunLocStartSkt INTEGER, qeDocTunLocEndSkt INTEGER, qeDocTunSktType INTEGER, qeDocTunDestAddress E164, qeDocTunDestSubAddress E164SUB, qeDocTunValidity INTEGER, qeDocTunLink0Eligible INTEGER, qeDocTunLink1Eligible INTEGER, qeDocTunLink2Eligible INTEGER, qeDocTunLink3Eligible INTEGER, qeDocTunRfc1483Encap INTEGER, qeDocTunClp INTEGER } qeDocTunIndex OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The tunnel index number." ::= { qeDocTunEntry 1 } qeDocTunName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Mnemonic name for tunnel." ::= { qeDocTunEntry 2 } qeDocTunType OBJECT-TYPE SYNTAX INTEGER { unused(1), ip(2), mac-bridge(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the type of tunnel." ::= { qeDocTunEntry 3 } qeDocTunState OBJECT-TYPE SYNTAX INTEGER { idle(1), use-pvc(2), use-svc(3), failed(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to Use pvc(2) if using with a PVC. Set to Use svc(3) if using with a SVC. Set to idle(1) to prevent tunnel being established." ::= { qeDocTunEntry 4 } qeDocTunCallState OBJECT-TYPE SYNTAX INTEGER { idle(1), allocated(2), waccept(3), active(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of tunnel call." ::= { qeDocTunEntry 5 } qeDocTunInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received frames count." ::= { qeDocTunEntry 6 } qeDocTunOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted frames count." ::= { qeDocTunEntry 7 } qeDocTunVPI OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VPI being used for the tunnel." ::= { qeDocTunEntry 8 } qeDocTunVCI OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VCI being used for the tunnel." ::= { qeDocTunEntry 9 } qeDocTunPriority OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Cell priority bit value." ::= { qeDocTunEntry 10 } qeDocTunSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Target slot for tunnel." ::= { qeDocTunEntry 11 } qeDocTunLink OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Target link for tunnel." ::= { qeDocTunEntry 12 } qeDocTunRemNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Remote network address for tunnel." ::= { qeDocTunEntry 13 } qeDocTunRemMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Mask for remote network." ::= { qeDocTunEntry 14 } qeDocTunLocNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Local network address for tunnel." ::= { qeDocTunEntry 15 } qeDocTunLocMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Mask for local network." ::= { qeDocTunEntry 16 } qeDocTunRemStartSkt OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies start of socket range from remote that is allowed/barred from access to tunnel." ::= { qeDocTunEntry 17 } qeDocTunRemEndSkt OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies end of socket range from remote that is allowed/barred from access to tunnel." ::= { qeDocTunEntry 18 } qeDocTunLocStartSkt OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies start of socket range from local that is allowed/barred from access to tunnel." ::= { qeDocTunEntry 19 } qeDocTunLocEndSkt OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies end of socket range from local that is allowed/barred from access to tunnel." ::= { qeDocTunEntry 20 } qeDocTunSktType OBJECT-TYPE SYNTAX INTEGER { tcpInc-udpInc(4), tcpInc-udpExc(3), tcpExc-udpInc(2), tcpExc-udpExc(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the protocol type and whether to include or exclude frames with socket number in the specified range." ::= { qeDocTunEntry 21 } qeDocTunDestAddress OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "Destination address for tunnel. This is only required for SVC tunnels." ::= { qeDocTunEntry 22 } qeDocTunDestSubAddress OBJECT-TYPE SYNTAX E164SUB ACCESS read-write STATUS mandatory DESCRIPTION "Destination sub-address for tunnel. This is only required for SVC tunnels." ::= { qeDocTunEntry 23 } qeDocTunLink0Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 0 eligible for frames" ::= { qeDocTunEntry 24 } qeDocTunLink1Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 1 eligible for frames" ::= { qeDocTunEntry 25 } qeDocTunLink2Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 2 eligible for frames" ::= { qeDocTunEntry 26 } qeDocTunLink3Eligible OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 3 eligible for frames" ::= { qeDocTunEntry 27 } qeDocTunValidity OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to invalid(2) removes the row from the table." ::= { qeDocTunEntry 28 } qeDocTunRfc1483Encap OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to yes(1) enable RFC 1483 LLC encapsulation." ::= { qeDocTunEntry 29 } -- Make entry# = 31 to match the slave mib definition. qeDocTunClp OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Cell loss priority bit value." ::= { qeDocTunEntry 31 } qeDocIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the QEDOC for management use." ::= { dv2QeDoc 7 } qeDocIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The mask for management use." ::= { dv2QeDoc 8 } qeDocIpBCast OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The management broadcast address." ::= { dv2QeDoc 9 } --___________________________________________________________________________ -- The SDHSonet config table sdhCTable OBJECT-TYPE SYNTAX SEQUENCE OF SdhCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to control sdh/Sonet configuration." ::= { dv2SDH 1 } sdhCEntry OBJECT-TYPE SYNTAX SdhCEntry ACCESS not-accessible STATUS mandatory INDEX { sdhCLinkNo } ::= { sdhCTable 1 } SdhCEntry ::= SEQUENCE { sdhCLinkNo INTEGER, sdhCLinkEnab INTEGER, sdhCLoopTimer INTEGER, sdhCLoopDiag INTEGER, sdhCLoopLine INTEGER, sdhCScrambler INTEGER, sdhC0x55 INTEGER, sdhSonetSdh INTEGER, sdhClearCounts INTEGER, sdhReconfig INTEGER, sdhCLpbkTimeout INTEGER, sdhStmSts INTEGER, sdhAPSOnOff INTEGER, sdhCIdleCell INTEGER } sdhCLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { sdhCEntry 1 } sdhCLinkEnab OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable the link." ::= { sdhCEntry 2 } sdhCLoopTimer OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable loop timing for this link." ::= { sdhCEntry 3 } sdhCLoopDiag OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable diagnostic loopback." ::= { sdhCEntry 4 } sdhCLoopLine OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to enable line loopback." ::= { sdhCEntry 5 } sdhCScrambler OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to no(2) to disable scramble mode for this link." ::= { sdhCEntry 6 } sdhC0x55 OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to no(2) then HCS is XORed with 0x55" ::= { sdhCEntry 7 } sdhSonetSdh OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to sdh(2) then sdh header is used" ::= { sdhCEntry 8 } sdhClearCounts OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Error Counts and Performance Parameters" ::= { sdhCEntry 9 } sdhReconfig OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Perform Reconfiguration for Link" ::= { sdhCEntry 10 } sdhCLpbkTimeout OBJECT-TYPE SYNTAX INTEGER (1..604800) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to set the loopback timeout in minutes." ::= { sdhCEntry 11 } sdhStmSts OBJECT-TYPE SYNTAX INTEGER { oc-3(1), oc-1(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to 155.52(1) for STS-3c/STM-1 format" DEFVAL { oc-3 } ::= { sdhCEntry 12 } sdhAPSOnOff OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to on(2) then sdh APS is used" DEFVAL { off } ::= { sdhCEntry 13 } sdhCIdleCell OBJECT-TYPE SYNTAX INTEGER { unassigned(1), idle(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Idle Cell Header Contents" ::= { sdhCEntry 14 } --___________________________________________________________________________ -- The sdh status table -- Depricate old sdh status table --sdhSTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SdhSEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "The status table for sdh/SONET." -- ::= { dv2SDH 2 } sdhSTable OBJECT-TYPE SYNTAX SEQUENCE OF SdhSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The status table for sdh/SONET." ::= { dv2SDH 3 } sdhSEntry OBJECT-TYPE SYNTAX SdhSEntry ACCESS not-accessible STATUS mandatory INDEX { sdhSLinkNo } ::= { sdhSTable 1 } SdhSEntry ::= SEQUENCE { sdhSLinkNo INTEGER, sdhSTXclock INTEGER, sdhSRXclock INTEGER, -- Defects(section, line, path) sdhSSectLOS INTEGER, sdhSSectOOF INTEGER, sdhSSectLOF INTEGER, sdhSLineAIS INTEGER, sdhSLineFERF INTEGER, sdhSPathAIS INTEGER, sdhSPathYellow INTEGER, sdhSPathFERF INTEGER, sdhSPathLOP INTEGER, sdhSPathLabelMM INTEGER, sdhSExBERDefect INTEGER, -- misc status' sdhSPathLabel INTEGER, sdhSCellDelState INTEGER, -- Alarms(section, line, path) sdhSAlarmLOS INTEGER, sdhSAlarmLOF INTEGER, sdhSAlarmLineAIS INTEGER, sdhSAlarmLineRFI INTEGER, sdhSAlarmPathAIS INTEGER, sdhSAlarmPathRFI INTEGER, sdhSAlarmLOP INTEGER, sdhSAlarmPLM INTEGER, sdhSExBERAlarm INTEGER, -- cell counts sdhSCorrHCS Counter, sdhSUnCorrHCS Counter } sdhSLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { sdhSEntry 1 } sdhSTXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of TX clock for this link." ::= { sdhSEntry 2 } sdhSRXclock OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of RX clock for this link." ::= { sdhSEntry 3 } sdhSSectLOS OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The loss of signal indicator." ::= { sdhSEntry 4 } sdhSSectOOF OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The out of frame indicator." ::= { sdhSEntry 5 } sdhSSectLOF OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The loss of frame indicator." ::= { sdhSEntry 6 } sdhSLineAIS OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if Line AIS detected." ::= { sdhSEntry 7 } sdhSLineFERF OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if Line FERF detected." ::= { sdhSEntry 8 } sdhSPathAIS OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if Alarm Indication Signal detected." ::= { sdhSEntry 9 } sdhSPathYellow OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if yellow alarm active." ::= { sdhSEntry 10 } sdhSPathFERF OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if Far End Receive Failure detected." ::= { sdhSEntry 11 } sdhSPathLOP OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if Loss Of Pointer detected." ::= { sdhSEntry 12 } sdhSPathLabelMM OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a Path Label Mismatch is detected" ::= { sdhSEntry 13 } sdhSExBERDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Defect" ::= { sdhSEntry 14 } sdhSPathLabel OBJECT-TYPE SYNTAX INTEGER { atm(1), non-atm(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The Path Label." ::= { sdhSEntry 15 } sdhSCellDelState OBJECT-TYPE SYNTAX INTEGER { hunt-or-presync(1), sync(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The Cell Delineation State" ::= { sdhSEntry 16 } sdhSAlarmLOS OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a LOS failure is declared" ::= { sdhSEntry 17 } sdhSAlarmLOF OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a LOF failure is declared" ::= { sdhSEntry 18 } sdhSAlarmLineAIS OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a Line AIS failure is declared" ::= { sdhSEntry 19 } sdhSAlarmLineRFI OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a Line Remote Failure Indication (Yellow Alarm) failure is declared" ::= { sdhSEntry 20 } sdhSAlarmPathAIS OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a Path AIS failure is declared" ::= { sdhSEntry 21 } sdhSAlarmPathRFI OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a Path Remote Failure Indication (Yellow Alarm) failure is declared" ::= { sdhSEntry 22 } sdhSAlarmLOP OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a LOP failure is declared" ::= { sdhSEntry 23 } sdhSAlarmPLM OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes(1) if a Payload Mismatch failure is declared" ::= { sdhSEntry 24 } sdhSExBERAlarm OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Excessive Bit Error Rate Alarm" ::= { sdhSEntry 25 } sdhSCorrHCS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The correctable HCS errors count." ::= { sdhSEntry 26 } sdhSUnCorrHCS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The uncorrectable HCS errors count." ::= { sdhSEntry 27 } --___________________________________________________________________________ -- The sdh performance monitoring table sdhS2Table OBJECT-TYPE SYNTAX SEQUENCE OF SdhS2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "The second status table for sdh/SONET." ::= { dv2SDH 4 } sdhS2Entry OBJECT-TYPE SYNTAX SdhS2Entry ACCESS not-accessible STATUS mandatory INDEX { sdhS2LinkNo } ::= { sdhS2Table 1 } SdhS2Entry ::= SEQUENCE { sdhS2LinkNo INTEGER, -- Section near-end performance parameters sdhSSectBIP8 Counter, sdhSSectES Counter, sdhSSectSES Counter, -- Line near-end performance parameters sdhSLineBIP24 Counter, sdhSLineES Counter, sdhSLineSES Counter, sdhSLineUAS Counter, sdhSLineFC Counter, -- Path near-end performance parameters sdhSPathBIP8 Counter, sdhSPathES Counter, sdhSPathSES Counter, sdhSPathUAS Counter, sdhSPathFC Counter, -- Line far-end performance parameters sdhSLineFEBE Counter, sdhSLineFarEndES Counter, sdhSLineFarEndSES Counter, sdhSLineFarEndUAS Counter, sdhSLineFarEndFC Counter, -- Path far-end performance parameters sdhSPathFEBE Counter, sdhSPathFarEndES Counter, sdhSPathFarEndSES Counter, sdhSPathFarEndUAS Counter, sdhSPathFarEndFC Counter } sdhS2LinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this status." ::= { sdhS2Entry 1 } sdhSSectBIP8 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Section BIP-8 error count." ::= { sdhS2Entry 2 } sdhSSectES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Section Errored Seconds" ::= { sdhS2Entry 3 } sdhSSectSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Section Severely Errored Seconds" ::= { sdhS2Entry 4 } sdhSLineBIP24 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line BIP-24 error count." ::= { sdhS2Entry 5 } sdhSLineES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Errored Seconds" ::= { sdhS2Entry 6 } sdhSLineSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Severely Errored Seconds" ::= { sdhS2Entry 7 } sdhSLineUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Unavailable Seconds" ::= { sdhS2Entry 8 } sdhSLineFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Line Failure Count" ::= { sdhS2Entry 9 } sdhSPathBIP8 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The path BIP-8 count." ::= { sdhS2Entry 10 } sdhSPathES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Path Errored Seconds" ::= { sdhS2Entry 11 } sdhSPathSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Path Severely Errored Seconds" ::= { sdhS2Entry 12 } sdhSPathUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Path Unavailable Seconds" ::= { sdhS2Entry 13 } sdhSPathFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Path Failure Count" ::= { sdhS2Entry 14 } sdhSLineFEBE OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far end block errors." ::= { sdhS2Entry 15 } sdhSLineFarEndES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Line Errored Seconds" ::= { sdhS2Entry 16 } sdhSLineFarEndSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Line Severely Errored Seconds" ::= { sdhS2Entry 17 } sdhSLineFarEndUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Line Unavailable Seconds" ::= { sdhS2Entry 18 } sdhSLineFarEndFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Line Failure Count" ::= { sdhS2Entry 19 } sdhSPathFEBE OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Path Far End Block Error count." ::= { sdhS2Entry 20 } sdhSPathFarEndES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Path Errored Second" ::= { sdhS2Entry 21 } sdhSPathFarEndSES OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Path Severely Errored Seconds" ::= { sdhS2Entry 22 } sdhSPathFarEndUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Path Unavailable Seconds" ::= { sdhS2Entry 23 } sdhSPathFarEndFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Path Failure Count" ::= { sdhS2Entry 24 } --___________________________________________________________________________ -- The Pvc group pvcResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF PvcResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about the resource available for pvcs on each link." ::= { dv2Pvc 1 } pvcResourceEntry OBJECT-TYPE SYNTAX PvcResourceEntry ACCESS not-accessible STATUS mandatory INDEX { pvcSlot, pvcLink } ::= { pvcResourceTable 1 } PvcResourceEntry ::= SEQUENCE { pvcSlot INTEGER (0..15), pvcLink INTEGER, pvcVciStart VirtualCircuitIdentifier, pvcVciEnd VirtualCircuitIdentifier, pvcVpiStart VirtualPathIdentifier, pvcVpiEnd VirtualPathIdentifier, pvcVpStart VirtualPathIdentifier, pvcVpEnd VirtualPathIdentifier, -- pvcForwardCellRateTotal -- INTEGER (0..16777215), -- pvcForwardCellRateAvailable -- INTEGER (0..16777215), pvcBackwardCellRateTotal INTEGER (0..16777215), -- pvcBackwardCellRateAvailable -- INTEGER (0..16777215), pvcLinkQoS INTEGER, pvcMolnVci INTEGER, pvcMolnVpi INTEGER, pvcLowPriOverbookFactor INTEGER } pvcSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "The slot number." ::= { pvcResourceEntry 1 } pvcLink OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "The link number being used for the call." ::= { pvcResourceEntry 2 } pvcVciStart OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the start of the range of PVC VCI values supported on this link." ::= { pvcResourceEntry 3 } pvcVciEnd OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of PVC VCI values supported on this link." ::= { pvcResourceEntry 4 } pvcVpiStart OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the start of the range of PVC VPI values supported on this link." ::= { pvcResourceEntry 5 } pvcVpiEnd OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of PVC VPI values supported on this link." ::= { pvcResourceEntry 6 } pvcVpStart OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the start of the range of VPs supported on this link." ::= { pvcResourceEntry 7 } pvcVpEnd OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of VPs supported on this link." ::= { pvcResourceEntry 8 } --pvcForwardCellRateTotal OBJECT-TYPE -- SYNTAX INTEGER (0..16777215) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The forward total cell rate configured for PVCs on this link. Note that this object is in cells per second (CPS)." -- ::= { pvcResourceEntry 9 } --pvcForwardCellRateAvailable OBJECT-TYPE -- SYNTAX INTEGER (0..16777215) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The forward cell rate available for PVCs on this link. Note that this object is in cells per second (CPS)." -- ::= { pvcResourceEntry 10 } pvcBackwardCellRateTotal OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The backward total cell rate configured for PVCs on this link. Note that this object is in cells per second (CPS)." ::= { pvcResourceEntry 11 } --pvcBackwardCellRateAvailable OBJECT-TYPE -- SYNTAX INTEGER (0..16777215) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The backward cell rate available for PVCs on this link. Note that this object is in cells per second (CPS)." -- ::= { pvcResourceEntry 12 } pvcLinkQoS OBJECT-TYPE SYNTAX INTEGER { uni(1), nni(2), b-ici(3), non-atm-link(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the type of ATM link." ::= { pvcResourceEntry 13 } pvcMolnVpi OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This is the VPI for the management overlay network." ::= {pvcResourceEntry 14 } pvcMolnVci OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This is the VCI for the management overlay network." DEFVAL { 16 } ::= {pvcResourceEntry 15 } pvcLowPriOverbookFactor OBJECT-TYPE SYNTAX INTEGER (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the percentage of low priority traffic overbook factor." DEFVAL { 0 } ::= {pvcResourceEntry 16 } pvcTable OBJECT-TYPE SYNTAX SEQUENCE OF PvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on each PVC." ::= { dv2Pvc 2 } pvcEntry OBJECT-TYPE SYNTAX PvcEntry ACCESS not-accessible STATUS mandatory INDEX { pvcDSlot, pvcDLink, pvcDvci, pvcDvpi, pvcSSlot, pvcSLink, pvcSvci, pvcSvpi } ::= { pvcTable 1 } PvcEntry ::= SEQUENCE { pvcDSlot INTEGER (0..15), pvcDLink INTEGER (0..3), pvcDvci VirtualCircuitIdentifier, pvcDvpi VirtualPathIdentifier, pvcSSlot INTEGER (0..15), pvcSLink INTEGER (0..3), pvcSvci VirtualCircuitIdentifier, pvcSvpi VirtualPathIdentifier, pvcForwardPeakCellRate INTEGER (0..16777215), pvcForwardPeakSize INTEGER (0..16777215), pvcForwardPeakMode INTEGER, pvcBackwardPeakCellRate INTEGER (0..16777215), pvcBackwardPeakSize INTEGER (0..16777215), pvcBackwardPeakMode INTEGER, pvcForwardSustainedCellRate INTEGER (0..16777215), pvcForwardSustainedSize INTEGER (0..16777215), pvcForwardSustainedMode INTEGER, pvcBackwardSustainedCellRate INTEGER (0..16777215), pvcBackwardSustainedSize INTEGER (0..16777215), pvcBackwardSustainedMode INTEGER, pvcAuxForwardPeakCellRate INTEGER (0..16777215), pvcAuxForwardPeakSize INTEGER (0..16777215), pvcAuxForwardPeakMode INTEGER, pvcAuxBackwardPeakCellRate INTEGER (0..16777215), pvcAuxBackwardPeakSize INTEGER (0..16777215), pvcAuxBackwardPeakMode INTEGER, pvcAuxForwardSustainedCellRate INTEGER (0..16777215), pvcAuxForwardSustainedSize INTEGER (0..16777215), pvcAuxForwardSustainedMode INTEGER, pvcAuxBackwardSustainedCellRate INTEGER (0..16777215), pvcAuxBackwardSustainedSize INTEGER (0..16777215), pvcAuxBackwardSustainedMode INTEGER, pvcQoSClass INTEGER, pvcStatus INTEGER, pvcMulticast INTEGER, pvcInternalVpi INTEGER, pvcInternalVci INTEGER, pvcNumLeaves INTEGER, pvcDirection INTEGER } pvcDSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The destination slot for the PVC." ::= { pvcEntry 1 } pvcDLink OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "The destination link for the PVC." ::= { pvcEntry 2 } pvcDvci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The destination virtual circuit identifier for the PVC." ::= { pvcEntry 3 } pvcDvpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The destination virtual path identifier for the PVC." ::= { pvcEntry 4 } pvcSSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The source slot for the PVC." ::= { pvcEntry 5 } pvcSLink OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "The source link for the PVC." ::= { pvcEntry 6 } pvcSvci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The source virtual circuit identifier for the PVC." ::= { pvcEntry 7 } pvcSvpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The source virtual path identifier for the PVC." ::= { pvcEntry 8 } pvcForwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Forward Peak Cell Rate (CPS)" ::= { pvcEntry 9 } pvcForwardPeakSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Forward Peak Bucket Size (Cells)" ::= { pvcEntry 10 } pvcForwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Forward Peak Mode" ::= { pvcEntry 11 } pvcBackwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Backward Peak Cell Rate (CPS)" ::= { pvcEntry 12 } pvcBackwardPeakSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Backward Peak Bucket Size (Cells)" ::= { pvcEntry 13 } pvcBackwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Backward Peak Mode" ::= { pvcEntry 14 } pvcForwardSustainedCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Forward Sustained Cell Rate (CPS)" ::= { pvcEntry 15 } pvcForwardSustainedSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Forward Sustained Bucket Size (Cells)" ::= { pvcEntry 16 } pvcForwardSustainedMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Forward Sustained Mode" ::= { pvcEntry 17 } pvcBackwardSustainedCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Backward Sustained Cell Rate (CPS)" ::= { pvcEntry 18 } pvcBackwardSustainedSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Backward Sustained Bucket Size (Cells)" ::= { pvcEntry 19 } pvcBackwardSustainedMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Backward Sustained Mode" ::= { pvcEntry 20 } pvcAuxForwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Forward Peak Cell Rate (CPS)" ::= { pvcEntry 21 } pvcAuxForwardPeakSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Forward Peak Bucket Size (Cells)" ::= { pvcEntry 22 } pvcAuxForwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Forward Peak Mode" ::= { pvcEntry 23 } pvcAuxBackwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Backward Peak Cell Rate (CPS)" ::= { pvcEntry 24 } pvcAuxBackwardPeakSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Backward Peak Bucket Size (Cells)" ::= { pvcEntry 25 } pvcAuxBackwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Backward Peak Mode" ::= { pvcEntry 26 } pvcAuxForwardSustainedCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Forward Sustained Cell Rate (CPS)" ::= { pvcEntry 27 } pvcAuxForwardSustainedSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Forward Sustained Bucket Size (Cells)" ::= { pvcEntry 28 } pvcAuxForwardSustainedMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Forward Sustained Mode" ::= { pvcEntry 29 } pvcAuxBackwardSustainedCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Backward Sustained Cell Rate (CPS)" ::= { pvcEntry 30 } pvcAuxBackwardSustainedSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Backward Sustained Bucket Size" ::= { pvcEntry 31 } pvcAuxBackwardSustainedMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Auxiliary Backward Sustained Mode" ::= { pvcEntry 32 } pvcQoSClass OBJECT-TYPE SYNTAX INTEGER { cbr(1), vbr-high(2), vbr-med(3), vbr-low(4) } ACCESS read-write STATUS mandatory DESCRIPTION "CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) is a `best effort' service - low priority and the cells may be discard." ::= { pvcEntry 33 } pvcStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2), start-PVC(3), notified(4), running(5), waiting(6) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to invalid(2), the PVC entry is removed. Set to start-PVC(3) to activate the PVC. When the state changes to running(5) then the PVC is successfully running. (6) pvc restarted" ::= { pvcEntry 34 } pvcMulticast OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to no, multicast is not allowed; otherwise, multicast is allowed." ::= { pvcEntry 35 } pvcInternalVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the internal VPI value that the source side of multicast tree ranslates its orignal VPI to." ::= { pvcEntry 36 } pvcInternalVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the internal VCI value that the source side of multicast tree ranslates its orignal VCI to." ::= { pvcEntry 37 } pvcNumLeaves OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the number of leaves this multicast tree currently contains." ::= { pvcEntry 38 } pvcDirection OBJECT-TYPE SYNTAX INTEGER { bidirect(1), unidirect(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines if a multicast PVC is to be unidirectional or bidirectional" ::= { pvcEntry 39 } --___________________________________________________________________________ -- The Svc group svcMaxPtPtConnections OBJECT-TYPE SYNTAX INTEGER (0..750) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of point-to-point connections." DEFVAL { 25 } ::= { dv2Svc 1 } svcMaxPtMptConnections OBJECT-TYPE SYNTAX INTEGER (0..25) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of point-to-multipoint connections." DEFVAL { 3 } ::= { dv2Svc 2 } svcMaxPtMptParties OBJECT-TYPE SYNTAX INTEGER (0..500) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of parties in a point-to-multipoint connection." DEFVAL { 10 } ::= { dv2Svc 3 } --svcIlmiSigVci OBJECT-TYPE -- SYNTAX VirtualCircuitIdentifier -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The VCI used for ILMI address registration." -- DEFVAL { 16 } -- ::= { dv2Svc 4 } --svcIlmiSigVpi OBJECT-TYPE -- SYNTAX VirtualPathIdentifier -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The VPI used for ILMI address registration." -- DEFVAL { 0 } -- ::= { dv2Svc 5 } svcResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about the resource available for svcs on each link." ::= { dv2Svc 6 } svcResourceEntry OBJECT-TYPE SYNTAX SvcResourceEntry ACCESS not-accessible STATUS mandatory INDEX { svcSAP } ::= { svcResourceTable 1 } SvcResourceEntry ::= SEQUENCE { svcSAP INTEGER (0..31), svcHiLo INTEGER, svcVciStart INTEGER (32..4095), svcVciEnd INTEGER (32..4095), svcVpiStart INTEGER (0..255), svcVpiEnd INTEGER (0..255), svcVpStart INTEGER (0..255), svcVpEnd INTEGER (0..255), -- svcForwardCellRateTotal -- INTEGER (0..16777215), -- svcForwardCellRateAvailable -- INTEGER (0..16777215), svcBackwardCellRateTotal INTEGER (0..16777215), svcBackwardCellRateAvailable INTEGER (0..16777215), svcSigVci INTEGER (0..511), svcSigVpi INTEGER (0..255), svcSAPStatus INTEGER, svcCDVTSize INTEGER, svcIntType INTEGER, svcPolicing INTEGER, svcLowPriOverbookFactor INTEGER, svcMaxSapConn INTEGER, svcCurSapConn INTEGER, svcLinkNo INTEGER (0..3), svcVpiMapping INTEGER, svcQosRoute INTEGER, svcSwtch INTEGER, svcRestart INTEGER, svcE164Addr E164, svcAutoSapOff INTEGER } svcSAP OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the SAP." ::= { svcResourceEntry 1 } svcHiLo OBJECT-TYPE SYNTAX INTEGER { low(2), high(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Select VPI/VCI values from low to high or high to low" DEFVAL { low } ::= { svcResourceEntry 2 } svcVciStart OBJECT-TYPE SYNTAX INTEGER (32..4095) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the start of the range of SVC VCI values supported on this link." ::= { svcResourceEntry 3 } svcVciEnd OBJECT-TYPE SYNTAX INTEGER (32..4095) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the end of the range of SVC VCI values supported on this link." ::= { svcResourceEntry 4 } svcVpiStart OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the start of the range of SVC VPI values supported on this link." ::= { svcResourceEntry 5 } svcVpiEnd OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of SVC VPI values supported on this link." ::= { svcResourceEntry 6 } svcVpStart OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the start of the range of SVPs supported on this link." ::= { svcResourceEntry 7 } svcVpEnd OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of SVPs supported on this link." ::= { svcResourceEntry 8 } --svcForwardCellRateTotal OBJECT-TYPE -- SYNTAX INTEGER (0..16777215) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The forward total cell rate configured for SVCs on this link. Note that this object is in cells per second (CPS)." -- ::= { svcResourceEntry 9 } --svcForwardCellRateAvailable OBJECT-TYPE -- SYNTAX INTEGER (0..16777215) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The forward cell rate available for SVCs on this link. Note that this object is in cells per second (CPS)." -- ::= { svcResourceEntry 10 } svcBackwardCellRateTotal OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The backward total cell rate configured for SVCs on this link. Note that this object is in cells per second (CPS)." ::= { svcResourceEntry 11 } svcBackwardCellRateAvailable OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The backward cell rate available for SVCs on this link. Note that this object is in cells per second (CPS)." ::= { svcResourceEntry 12 } svcSigVci OBJECT-TYPE SYNTAX INTEGER (0..511) ACCESS read-write STATUS mandatory DESCRIPTION "The VCI used for signalling." DEFVAL { 5 } ::= { svcResourceEntry 13 } svcSigVpi OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The VPI used for signalling." ::= { svcResourceEntry 14 } svcSAPStatus OBJECT-TYPE SYNTAX INTEGER { off(1), reconfigure(2), reset(3), on(4), idle(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Select on(4) to activate the SAP, off(1) to deactivate, reconfigure(2) to hot reconfigure the vci/vpi ranges and reset(3) to clear all calls on the SAP." ::= { svcResourceEntry 15 } svcCDVTSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Cell Delay Variation Tolerance size." DEFVAL { 4 } ::= { svcResourceEntry 16 } svcIntType OBJECT-TYPE SYNTAX INTEGER { network(1), user(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Interface type - NETWORK or USER." ::= { svcResourceEntry 17 } svcPolicing OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Policing - ON or OFF" ::= { svcResourceEntry 18 } svcLowPriOverbookFactor OBJECT-TYPE SYNTAX INTEGER (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the percentage of low priority traffic overbook factor." DEFVAL { 0 } ::= {svcResourceEntry 19 } svcMaxSapConn OBJECT-TYPE SYNTAX INTEGER (0..750) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum SVCs this SAP" DEFVAL { 500 } ::= {svcResourceEntry 20 } svcCurSapConn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current SVC count this SAP" DEFVAL { 0 } ::= {svcResourceEntry 21 } svcLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This is the physical link number associated with this SAP" DEFVAL { 0 } ::= {svcResourceEntry 22 } svcVpiMapping OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VPI and VPCI mapping status" ::= { svcResourceEntry 23 } svcQosRoute OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "QoS based route" ::= { svcResourceEntry 24 } svcSwtch OBJECT-TYPE SYNTAX INTEGER { uni30(1), uni31(2), iisp30(3), iisp31(4) } ACCESS read-write STATUS mandatory DESCRIPTION "UNI Interface Type" ::= {svcResourceEntry 25 } svcRestart OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Send Restart when link is up" DEFVAL { off } ::= {svcResourceEntry 26 } svcE164Addr OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "The E.164 address for this SAP" ::= {svcResourceEntry 27 } svcAutoSapOff OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This option allows a Sap Status to be automatically turned OFF after T309 expiry. Select Yes(1) if a sap (which was ON before) is to be turned OFF after T309 expiry, else select No(2). By default, No(2) is selected." DEFVAL { no } ::= {svcResourceEntry 28 } svcTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on each on SVC." ::= { dv2Svc 7 } svcEntry OBJECT-TYPE SYNTAX SvcEntry ACCESS not-accessible STATUS mandatory INDEX { svcId } ::= { svcTable 1 } SvcEntry ::= SEQUENCE { svcId INTEGER, svcDSlot INTEGER (0..15), svcDLink INTEGER (0..3), svcDvci VirtualCircuitIdentifier, svcDvpi VirtualPathIdentifier, svcDE164 E164, svcDE164Sub E164SUB, svcSSlot INTEGER (0..15), svcSLink INTEGER (0..3), svcSvci VirtualCircuitIdentifier, svcSvpi VirtualPathIdentifier, svcSE164 E164, svcSE164Sub E164SUB, svcForwardPeakCellRate INTEGER (0..16777215), svcForwardPeakMode INTEGER, svcBackwardPeakCellRate INTEGER (0..16777215), svcBackwardPeakMode INTEGER, svcForwardSustainableCellRate INTEGER (0..16777215), svcForwardMaxBurstSize INTEGER (0..16777215), svcForwardSustainableMode INTEGER, svcBackwardSustainableCellRate INTEGER (0..16777215), svcBackwardMaxBurstSize INTEGER (0..16777215), svcBackwardSustainableMode INTEGER, svcQoSClass INTEGER, svcBillTag INTEGER, svcDuration Counter, svcType INTEGER, svcStatus INTEGER, svcNumLeaves INTEGER, svcInternalVpi INTEGER, svcInternalVci INTEGER } svcId OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The svc ID number" ::= { svcEntry 1 } svcDSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "The destination slot of the SVC." ::= { svcEntry 2 } svcDLink OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "The destination link of the SVC." ::= { svcEntry 3 } svcDvci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The destination virtual circuit identifier for the SVC." ::= { svcEntry 4 } svcDvpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The destination virtual path identifier for the SVC." ::= { svcEntry 5 } svcDE164 OBJECT-TYPE SYNTAX E164 ACCESS read-only STATUS mandatory DESCRIPTION "The destination E.164 address for the SVC." ::= { svcEntry 6 } svcDE164Sub OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "The destination sub-address for the SVC." ::= { svcEntry 7 } svcSSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "The source slot of the SVC." ::= { svcEntry 8 } svcSLink OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "The source link of the SVC." ::= { svcEntry 9 } svcSvci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The source virtual circuit identifier for a SVC." ::= { svcEntry 10 } svcSvpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The source virtual path identifier for a SVC." ::= { svcEntry 11 } svcSE164 OBJECT-TYPE SYNTAX E164 ACCESS read-only STATUS mandatory DESCRIPTION "The source E.164 address for the SVC." ::= { svcEntry 12 } svcSE164Sub OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "The source sub-address for the SVC." ::= { svcEntry 13 } svcForwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The forward user cell rate for a SVC. The forward user cell rate is a measurement of bandwidth available to the initiating user to transfer information to the responding user." ::= { svcEntry 14 } svcForwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8) } ACCESS read-only STATUS mandatory DESCRIPTION "SVC/SVP Forward Peak Mode" ::= { svcEntry 15 } svcBackwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The backward user cell rate for a SVC. The backward user cell rate is a measurement of bandwidth available to the responding user to transfer information to the initiating user." ::= { svcEntry 16 } svcBackwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8) } ACCESS read-only STATUS mandatory DESCRIPTION "SVC/SVP Backward Peak Mode" ::= { svcEntry 17 } svcForwardSustainableCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The sustainable forward cell rate for the SVC." ::= { svcEntry 18 } svcForwardMaxBurstSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The forward maximum burst size for the SVC." ::= { svcEntry 19 } svcForwardSustainableMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8) } ACCESS read-only STATUS mandatory DESCRIPTION "SVC/SVP Forward Sustained Mode" ::= { svcEntry 20 } svcBackwardSustainableCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The sustainable backward cell rate for the SVC." ::= { svcEntry 21 } svcBackwardMaxBurstSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The backward maximum burst size for the SVC." ::= { svcEntry 22 } svcBackwardSustainableMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8) } ACCESS read-only STATUS mandatory DESCRIPTION "SVC/SVP Backward Sustained Mode" ::= { svcEntry 23 } svcQoSClass OBJECT-TYPE SYNTAX INTEGER { qos1(1), qos2(2), qos3(3), qos4(4), ubrBe(5), abr(6), cbr(7), vbrRt(8), vbrNrt(9) } ACCESS read-only STATUS mandatory DESCRIPTION "CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) is a `best effort' service - low priority and the cells may be discarded." ::= { svcEntry 24 } svcBillTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This identifies the billable SVC." ::= { svcEntry 25 } svcDuration OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Duration of the SVC in milliseconds." ::= { svcEntry 26 } svcType OBJECT-TYPE SYNTAX INTEGER { point-to-point(1), point-to-multipoint(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of SVC." ::= { svcEntry 27 } svcStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), invalid(2), reset(3), active(5) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to invalid (2), the SVC is cleared and the entry is removed. If set to active(4) then the SVC is active." ::= { svcEntry 28 } svcNumLeaves OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of multicast leaves" ::= { svcEntry 29 } svcInternalVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "internal VPI used for multicast operation" ::= { svcEntry 30 } svcInternalVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "internal VCI used for multicast operation" ::= { svcEntry 31 } sPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF SPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on Semi-Permanent Virtual Circuits (SPVCs)." ::= { dv2Svc 8 } sPvcEntry OBJECT-TYPE SYNTAX SPvcEntry ACCESS not-accessible STATUS mandatory INDEX { sPvcId } ::= { sPvcTable 1 } SPvcEntry ::= SEQUENCE { sPvcId INTEGER, sPvcCallId INTEGER, sPvcLink INTEGER, sPvcAddress E164, sPvcForwardPeakCellRate INTEGER (0..16777215), sPvcForwardPeakMode INTEGER, sPvcBackwardPeakCellRate INTEGER (0..16777215), sPvcBackwardPeakMode INTEGER, sPvcForwardSustainableCellRate INTEGER (0..16777215), sPvcForwardMaxBurstSize INTEGER (0..16777215), sPvcForwardSustainableMode INTEGER, sPvcBackwardSustainableCellRate INTEGER (0..16777215), sPvcBackwardMaxBurstSize INTEGER (0..16777215), sPvcBackwardSustainableMode INTEGER, sPvcQoSClass INTEGER, sPvcSourceVci VirtualCircuitIdentifier, sPvcSourceVpi VirtualPathIdentifier, sPvcTargetVci VirtualCircuitIdentifier, sPvcTargetVpi VirtualPathIdentifier, sPvcRetry INTEGER (0..1000), sPvcConnectTime INTEGER, sPvcNumberRetries INTEGER (0..1000), sPvcFailures INTEGER, sPvcAlertFailures INTEGER, sPvcCauseDiag Q93bCauseDiag, sPvcType INTEGER, sPvcCallState INTEGER, sPvcStatus INTEGER, sPvcCauseDiagCode INTEGER, sPvcMulticast INTEGER } sPvcId OBJECT-TYPE SYNTAX INTEGER (1..750) ACCESS read-write STATUS mandatory DESCRIPTION "Slot-unique SPVC identifier." ::= { sPvcEntry 1 } sPvcCallId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Call identifier." DEFVAL { -1 } ::= { sPvcEntry 2 } sPvcLink OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The physical link for the SPVC." ::= { sPvcEntry 3 } sPvcAddress OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "The E.164 address for the SPVC." ::= { sPvcEntry 4 } sPvcForwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The forward user cell rate for an SPVC. The forward user cell rate is a measurement of bandwidth available to the initiating user to transfer information to the responding user." ::= { sPvcEntry 5 } sPvcForwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp01-discard(4) } ACCESS read-write STATUS mandatory DESCRIPTION "SPVC/SPVP Forward Peak Mode" DEFVAL { clp01-discard } ::= { sPvcEntry 6 } sPvcBackwardPeakCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The backward user cell rate for an SPVC. The backward user cell rate is a measurement of bandwidth available to the responding user to transfer information to the initiating user." ::= { sPvcEntry 7 } sPvcBackwardPeakMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp01-discard(4) } ACCESS read-write STATUS mandatory DESCRIPTION "SPVC/SPVP Backward Peak Mode" DEFVAL { clp01-discard } ::= { sPvcEntry 8 } sPvcForwardSustainableCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The sustainable forward cell rate for the SPVC." ::= { sPvcEntry 9 } sPvcForwardMaxBurstSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The forward maximum burst size for the SPVC." ::= { sPvcEntry 10 } sPvcForwardSustainableMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6) } ACCESS read-write STATUS mandatory DESCRIPTION "SPVC/SPVP Forward Sustained Mode" DEFVAL { clp0-discard } ::= { sPvcEntry 11 } sPvcBackwardSustainableCellRate OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The sustainable backward cell rate for the SPVC." ::= { sPvcEntry 12 } sPvcBackwardMaxBurstSize OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The backward maximum burst size for the SPVC." ::= { sPvcEntry 13 } sPvcBackwardSustainableMode OBJECT-TYPE SYNTAX INTEGER { off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6) } ACCESS read-write STATUS mandatory DESCRIPTION "SPVC/SPVP Backward Sustained Mode" DEFVAL { clp0-discard } ::= { sPvcEntry 14 } sPvcQoSClass OBJECT-TYPE SYNTAX INTEGER { cbr(1), vbr-high(2), vbr-med(3), vbr-low(4), best-effort(5) } ACCESS read-write STATUS mandatory DESCRIPTION "CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) has low priority and the cells may be discarded, best-effort is the same as vbr-low except no bandwidth is reserved." DEFVAL { cbr } ::= { sPvcEntry 15 } sPvcSourceVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The source virtual circuit identifier for the SPVC." ::= { sPvcEntry 16 } sPvcSourceVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The source virtual path identifier for the SPVC." ::= { sPvcEntry 17 } sPvcTargetVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The target virtual circuit identifier for the SPVC." ::= { sPvcEntry 18 } sPvcTargetVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The target virtual path identifier for the SPVC." ::= { sPvcEntry 19 } sPvcRetry OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Retry timeout. Zero represents an infinite timeout." DEFVAL { 5 } ::= { sPvcEntry 20 } sPvcConnectTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Connect time in ms." ::= { sPvcEntry 21 } sPvcNumberRetries OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Number of retries to attempt. Zero represents no limit." ::= { sPvcEntry 22 } sPvcFailures OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of the SPVC setup failures." ::= { sPvcEntry 23 } sPvcAlertFailures OBJECT-TYPE SYNTAX INTEGER { no-trap(1), fail(2), fail-or-clear(3), fail-all-attempts(4), call-success(5), trap-all(6), trap-state-change(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Describes the circumstances under which to issue an Alert message to the NMS." DEFVAL { no-trap } ::= { sPvcEntry 24 } sPvcCauseDiag OBJECT-TYPE SYNTAX Q93bCauseDiag ACCESS read-only STATUS mandatory DESCRIPTION "Cause and diagnostic codes." ::= { sPvcEntry 25 } sPvcType OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If the SPVC entry is passive, it will not try to initiate a call. An active will attempt to build an SPVC at intervals set by the retry field." DEFVAL { active } ::= { sPvcEntry 26 } sPvcCallState OBJECT-TYPE SYNTAX INTEGER { idle(1), call-setup(2), reset(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets the state of the SPVC. Set the value to invalid(3) to tear down the SPVC." DEFVAL { idle } ::= { sPvcEntry 27 } sPvcStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), sPVC-wait(2), l4-wait(3), active(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes the state of the SPVC." DEFVAL { idle } ::= { sPvcEntry 28 } sPvcCauseDiagCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cause and diagnostic codes as defined in UNI-3.0 Annex E ." ::= { sPvcEntry 29 } sPvcMulticast OBJECT-TYPE SYNTAX INTEGER { pt-pt(1), pt-mpt-root(2), pt-mpt-leaf(3), bidirect-root(4) } ACCESS read-write STATUS mandatory DESCRIPTION "pt-pt - point-to-point SPVC; pt-mpt - point-to-multipoint SPVC; bidirect-root: pt-mpt birection root." DEFVAL { pt-pt } ::= { sPvcEntry 30 } svcQ93bStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcQ93bStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistical protocol information for each link." ::= { dv2Svc 9 } svcQ93bStatEntry OBJECT-TYPE SYNTAX SvcQ93bStatEntry ACCESS not-accessible STATUS mandatory INDEX { svcQ93bStatSAP } ::= { svcQ93bStatTable 1 } SvcQ93bStatEntry ::= SEQUENCE { svcQ93bStatSAP INTEGER (0..31), svcQ93bStatActive INTEGER (0..16777215), svcQ93bStatAccumalative INTEGER (0..16777215), svcQ93bStatCallProcTx INTEGER (0..16777215), svcQ93bStatConnTx INTEGER (0..16777215), svcQ93bStatConnAckTx INTEGER (0..16777215), svcQ93bStatSetupTx INTEGER (0..16777215), svcQ93bStatRelTx INTEGER (0..16777215), svcQ93bStatRelCmpltTx INTEGER (0..16777215), svcQ93bStatRstTx INTEGER (0..16777215), svcQ93bStatRstAckTx INTEGER (0..16777215), svcQ93bStatStatTx INTEGER (0..16777215), svcQ93bStatStatEnqTx INTEGER (0..16777215), svcQ93bStatAddPtyTx INTEGER (0..16777215), svcQ93bStatAddPtyAckTx INTEGER (0..16777215), svcQ93bStatAddPtyRejTx INTEGER (0..16777215), svcQ93bStatDropPtyTx INTEGER (0..16777215), svcQ93bStatDropPtyAckTx INTEGER (0..16777215), svcQ93bStatLstCauseTx INTEGER (0..16777215), svcQ93bStatLstDiagTx INTEGER (0..16777215), svcQ93bStatCallProcRx INTEGER (0..16777215), svcQ93bStatConnRx INTEGER (0..16777215), svcQ93bStatConnAckRx INTEGER (0..16777215), svcQ93bStatSetupRx INTEGER (0..16777215), svcQ93bStatRelRx INTEGER (0..16777215), svcQ93bStatRelCmpltRx INTEGER (0..16777215), svcQ93bStatRstRx INTEGER (0..16777215), svcQ93bStatRstAckRx INTEGER (0..16777215), svcQ93bStatStatRx INTEGER (0..16777215), svcQ93bStatStatEnqRx INTEGER (0..16777215), svcQ93bStatAddPtyRx INTEGER (0..16777215), svcQ93bStatAddPtyAckRx INTEGER (0..16777215), svcQ93bStatAddPtyRejRx INTEGER (0..16777215), svcQ93bStatDropPtyRx INTEGER (0..16777215), svcQ93bStatDropPtyAckRx INTEGER (0..16777215), svcQ93bStatLstCauseRx INTEGER (0..16777215), svcQ93bStatLstDiagRx INTEGER (0..16777215), svcQ93bStatClr INTEGER, svcQ93bStatDiagTx Q93bCauseDiag, svcQ93bStatDiagRx Q93bCauseDiag } svcQ93bStatSAP OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "This is the layer 3 Service Access Point for the link." ::= { svcQ93bStatEntry 1 } svcQ93bStatActive OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Number of calls currently active on this SAP." ::= { svcQ93bStatEntry 2 } svcQ93bStatAccumalative OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Total number of calls established on this SAP." ::= { svcQ93bStatEntry 3 } svcQ93bStatCallProcTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Call Proceeding pdus transmitted on this SAP." ::= { svcQ93bStatEntry 4 } svcQ93bStatConnTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Connect pdus transmitted on this SAP." ::= { svcQ93bStatEntry 5 } svcQ93bStatConnAckTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Connect Acknowledge pdus transmitted on this SAP." ::= { svcQ93bStatEntry 6 } svcQ93bStatSetupTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Setup pdus transmitted on this SAP." ::= { svcQ93bStatEntry 7 } svcQ93bStatRelTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Release pdus transmitted on this SAP." ::= { svcQ93bStatEntry 8 } svcQ93bStatRelCmpltTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Release Complete pdus transmitted on this SAP." ::= { svcQ93bStatEntry 9 } svcQ93bStatRstTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Restart pdus transmitted on this SAP." ::= { svcQ93bStatEntry 10 } svcQ93bStatRstAckTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Restart Acknowledge pdus transmitted on this SAP." ::= { svcQ93bStatEntry 11 } svcQ93bStatStatTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Status pdus transmitted on this SAP." ::= { svcQ93bStatEntry 12 } svcQ93bStatStatEnqTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Status Enquiry pdus transmitted on this SAP." ::= { svcQ93bStatEntry 13 } svcQ93bStatAddPtyTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Add Party pdus transmitted on this SAP." ::= { svcQ93bStatEntry 14 } svcQ93bStatAddPtyAckTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Add Party Acknowledge pdus transmitted on this SAP." ::= { svcQ93bStatEntry 15 } svcQ93bStatAddPtyRejTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Add Party Reject pdus transmitted on this SAP." ::= { svcQ93bStatEntry 16 } svcQ93bStatDropPtyTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Drop Party pdus transmitted on this SAP." ::= { svcQ93bStatEntry 17 } svcQ93bStatDropPtyAckTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Drop Party Acknowledge pdus transmitted on this SAP." ::= { svcQ93bStatEntry 18 } svcQ93bStatLstCauseTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Last cause code transmitted." ::= { svcQ93bStatEntry 19 } svcQ93bStatLstDiagTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Last diagnostic code transmitted." ::= { svcQ93bStatEntry 20 } svcQ93bStatCallProcRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Call Proceeding pdus received on this SAP." ::= { svcQ93bStatEntry 21 } svcQ93bStatConnRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Connect pdus received on this SAP." ::= { svcQ93bStatEntry 22 } svcQ93bStatConnAckRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Connect Acknowledge pdus received on this SAP." ::= { svcQ93bStatEntry 23 } svcQ93bStatSetupRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Setup pdus received on this SAP." ::= { svcQ93bStatEntry 24 } svcQ93bStatRelRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Release pdus received on this SAP." ::= { svcQ93bStatEntry 25 } svcQ93bStatRelCmpltRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Release Complete pdus received on this SAP." ::= { svcQ93bStatEntry 26 } svcQ93bStatRstRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Restart pdus received on this SAP." ::= { svcQ93bStatEntry 27 } svcQ93bStatRstAckRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Restart Acknowledge pdus received on this SAP." ::= { svcQ93bStatEntry 28 } svcQ93bStatStatRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Status pdus received on this SAP." ::= { svcQ93bStatEntry 29 } svcQ93bStatStatEnqRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Status Enquiry pdus received on this SAP." ::= { svcQ93bStatEntry 30 } svcQ93bStatAddPtyRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Add Party pdus received on this SAP." ::= { svcQ93bStatEntry 31 } svcQ93bStatAddPtyAckRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Add Party Acknowledge pdus received on this SAP." ::= { svcQ93bStatEntry 32 } svcQ93bStatAddPtyRejRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Add Party Reject pdus received on this SAP." ::= { svcQ93bStatEntry 33 } svcQ93bStatDropPtyRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Drop Party pdus received on this SAP." ::= { svcQ93bStatEntry 34 } svcQ93bStatDropPtyAckRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Drop Party Acknowledge pdus received on this SAP." ::= { svcQ93bStatEntry 35 } svcQ93bStatLstCauseRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Last cause code received." ::= { svcQ93bStatEntry 36 } svcQ93bStatLstDiagRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Last diagnostic code received." ::= { svcQ93bStatEntry 37 } svcQ93bStatClr OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Q.93B statistics for this SAP." ::= { svcQ93bStatEntry 38 } svcQ93bStatDiagTx OBJECT-TYPE SYNTAX Q93bCauseDiag ACCESS read-only STATUS mandatory DESCRIPTION "Tx SAP diagnostic codes" ::= { svcQ93bStatEntry 39 } svcQ93bStatDiagRx OBJECT-TYPE SYNTAX Q93bCauseDiag ACCESS read-only STATUS mandatory DESCRIPTION "Rx SAP diagnostic codes" ::= { svcQ93bStatEntry 40 } svcQsaalStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcQsaalStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains protocol information for the Q.SAAL layer for each link." ::= { dv2Svc 10 } svcQsaalStatEntry OBJECT-TYPE SYNTAX SvcQsaalStatEntry ACCESS not-accessible STATUS mandatory INDEX { svcQsaalStatSAP } ::= { svcQsaalStatTable 1 } SvcQsaalStatEntry ::= SEQUENCE { svcQsaalStatSAP INTEGER (0..31), svcQsaalStatOutSduDisc INTEGER (0..16777215), svcQsaalStatInPduErr INTEGER (0..16777215), svcQsaalStatInPduDisc INTEGER (0..16777215), svcQsaalStatOutPduErr INTEGER (0..16777215), svcQsaalStatOutPduDisc INTEGER (0..16777215), svcQsaalStatBgnTx INTEGER (0..16777215), svcQsaalStatBgakTx INTEGER (0..16777215), svcQsaalStatBgrejTx INTEGER (0..16777215), svcQsaalStatEndTx INTEGER (0..16777215), svcQsaalStatRsTx INTEGER (0..16777215), svcQsaalStatRsakTx INTEGER (0..16777215), svcQsaalStatSdTx INTEGER (0..16777215), svcQsaalStatSdpTx INTEGER (0..16777215), svcQsaalStatPollTx INTEGER (0..16777215), svcQsaalStatStatTx INTEGER (0..16777215), svcQsaalStatUstatTx INTEGER (0..16777215), svcQsaalStatUdTx INTEGER (0..16777215), svcQsaalStatMdTx INTEGER (0..16777215), svcQsaalStatBgnRx INTEGER (0..16777215), svcQsaalStatBgakRx INTEGER (0..16777215), svcQsaalStatBgrejRx INTEGER (0..16777215), svcQsaalStatEndRx INTEGER (0..16777215), svcQsaalStatRsRx INTEGER (0..16777215), svcQsaalStatRsakRx INTEGER (0..16777215), svcQsaalStatSdRx INTEGER (0..16777215), svcQsaalStatSdpRx INTEGER (0..16777215), svcQsaalStatPollRx INTEGER (0..16777215), svcQsaalStatStatRx INTEGER (0..16777215), svcQsaalStatUstatRx INTEGER (0..16777215), svcQsaalStatUdRx INTEGER (0..16777215), svcQsaalStatMdRx INTEGER (0..16777215), svcQsaalStatClr INTEGER } svcQsaalStatSAP OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "This is the layer 3 Service Access Point for the link." ::= { svcQsaalStatEntry 1 } svcQsaalStatOutSduDisc OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Outgoing SDUs discarded." ::= { svcQsaalStatEntry 2 } svcQsaalStatInPduErr OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming PDUs with a reception error." ::= { svcQsaalStatEntry 3 } svcQsaalStatInPduDisc OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming PDUs discarded." ::= { svcQsaalStatEntry 4 } svcQsaalStatOutPduErr OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing PDUs with a transmission error." ::= { svcQsaalStatEntry 5 } svcQsaalStatOutPduDisc OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing PDUs discarded." ::= { svcQsaalStatEntry 6 } svcQsaalStatBgnTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "BGN pdus transmitted on this SAP." ::= { svcQsaalStatEntry 7 } svcQsaalStatBgakTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "BGAK pdus transmitted on this SAP." ::= { svcQsaalStatEntry 8 } svcQsaalStatBgrejTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "BGREJ pdus transmitted on this SAP." ::= { svcQsaalStatEntry 9 } svcQsaalStatEndTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "END pdus transmitted on this SAP." ::= { svcQsaalStatEntry 10 } svcQsaalStatRsTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "RS pdus transmitted on this SAP." ::= { svcQsaalStatEntry 11 } svcQsaalStatRsakTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "RSAK pdus transmitted on this SAP." ::= { svcQsaalStatEntry 12 } svcQsaalStatSdTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "SD pdus transmitted on this SAP." ::= { svcQsaalStatEntry 13 } svcQsaalStatSdpTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "SDP pdus transmitted on this SAP." ::= { svcQsaalStatEntry 14 } svcQsaalStatPollTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "POLL pdus transmitted on this SAP." ::= { svcQsaalStatEntry 15 } svcQsaalStatStatTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "STAT pdus transmitted on this SAP." ::= { svcQsaalStatEntry 16 } svcQsaalStatUstatTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "USTAT pdus transmitted on this SAP." ::= { svcQsaalStatEntry 17 } svcQsaalStatUdTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "UD pdus transmitted on this SAP." ::= { svcQsaalStatEntry 18 } svcQsaalStatMdTx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "MD pdus transmitted on this SAP." ::= { svcQsaalStatEntry 19 } svcQsaalStatBgnRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "BGN pdus received on this SAP." ::= { svcQsaalStatEntry 20 } svcQsaalStatBgakRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "BGAK pdus received on this SAP." ::= { svcQsaalStatEntry 21 } svcQsaalStatBgrejRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "BGREJ pdus received on this SAP." ::= { svcQsaalStatEntry 22 } svcQsaalStatEndRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "END pdus received on this SAP." ::= { svcQsaalStatEntry 23 } svcQsaalStatRsRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "RS pdus received on this SAP." ::= { svcQsaalStatEntry 24 } svcQsaalStatRsakRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "RSAK pdus received on this SAP." ::= { svcQsaalStatEntry 25 } svcQsaalStatSdRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "SD pdus received on this SAP." ::= { svcQsaalStatEntry 26 } svcQsaalStatSdpRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "SDP pdus received on this SAP." ::= { svcQsaalStatEntry 27 } svcQsaalStatPollRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "POLL pdus received on this SAP." ::= { svcQsaalStatEntry 28 } svcQsaalStatStatRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "STAT pdus received on this SAP." ::= { svcQsaalStatEntry 29 } svcQsaalStatUstatRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "USTAT pdus received on this SAP." ::= { svcQsaalStatEntry 30 } svcQsaalStatUdRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "UD pdus received on this SAP." ::= { svcQsaalStatEntry 31 } svcQsaalStatMdRx OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "MD pdus received on this SAP." ::= { svcQsaalStatEntry 32 } svcQsaalStatClr OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear statistics for this SAP." ::= { svcQsaalStatEntry 33 } svcQsaalTmrPoll OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Timer_POLL (8=800ms)." DEFVAL { 8 } ::= { dv2Svc 11 } svcQsaalTmrKeepAlive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Timer_KEEPALIVE (20=2seconds)." DEFVAL { 20 } ::= { dv2Svc 12 } svcQsaalTmrNoResponse OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Timer_NORESPONSE (100=10seconds)." DEFVAL { 100 } ::= { dv2Svc 13 } svcQsaalTmrCC OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Timer_CC (20=2seconds)." DEFVAL { 20 } ::= { dv2Svc 14 } svcQsaalMaxPD OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Maximum PD." DEFVAL { 15 } ::= { dv2Svc 15 } svcQ93bTmrT303 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B T303 (40=4seconds)." DEFVAL { 40 } ::= { dv2Svc 16 } svcQ93bTmrT310 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B T310 (200=20seconds)." DEFVAL { 200 } ::= { dv2Svc 17 } svcQ93bTmrT308 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B T308 (300=30seconds)." DEFVAL { 300 } ::= { dv2Svc 18 } svcQ93bTmrT309 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B T309 (150=15seconds)." DEFVAL { 150 } ::= { dv2Svc 19 } maxOutstanding OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Max Outgoing Outstanding Calls." DEFVAL { 3 } ::= { dv2Svc 20 } svcLoadRoute OBJECT-TYPE SYNTAX INTEGER { both(1), none(2), rte-table(3), dtl-bin(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Poke point for loading routing tables" DEFVAL { both } ::= { dv2Svc 21 } svcHalfConTimer OBJECT-TYPE SYNTAX INTEGER (0..3000) ACCESS read-write STATUS mandatory DESCRIPTION "SVC half connect recovery poll timer" DEFVAL { 10 } ::= { dv2Svc 22 } svcHalfConCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC half connect counter" DEFVAL { 0 } ::= { dv2Svc 23 } svcQ93bTmrT398 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B T398 (40= 4 seconds)." DEFVAL { 40 } ::= { dv2Svc 24 } svcQ93bTmrT399 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B T399 (140= 14 seconds)." DEFVAL { 140 } ::= { dv2Svc 25 } svcRetryPeriod OBJECT-TYPE SYNTAX INTEGER (15..180) ACCESS read-write STATUS mandatory DESCRIPTION "Retry Period" DEFVAL { 180 } ::= { dv2Svc 26 } svcCellRateTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcCellRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about the limitations on Cell Rates on link" ::= { dv2Svc 27 } svcCellRateEntry OBJECT-TYPE SYNTAX SvcCellRateEntry ACCESS not-accessible STATUS mandatory INDEX { svcCRLinkNo } ::= { svcCellRateTable 1 } SvcCellRateEntry ::= SEQUENCE { svcCRLinkNo INTEGER, svcPCRCLP01Max INTEGER, svcSCRMax INTEGER, svcMBSMax INTEGER } svcCRLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This is the physical link number associated with this SAP" ::= {svcCellRateEntry 1 } svcPCRCLP01Max OBJECT-TYPE SYNTAX INTEGER (0..16777216) ACCESS read-write STATUS mandatory DESCRIPTION "PCRCLP01 Max(0 disables checking)" DEFVAL { 0 } ::= { svcCellRateEntry 2 } svcSCRMax OBJECT-TYPE SYNTAX INTEGER (0..16777216) ACCESS read-write STATUS mandatory DESCRIPTION "SCR Max(0 disables checking)" DEFVAL { 0 } ::= { svcCellRateEntry 3 } svcMBSMax OBJECT-TYPE SYNTAX INTEGER (0..16777216) ACCESS read-write STATUS mandatory DESCRIPTION "MBS Max(0 disables checking)" DEFVAL { 0 } ::= { svcCellRateEntry 4 } svcTrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcTrafficEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about the limitations on Cell Rates on link" ::= { dv2Svc 28 } svcTrafficEntry OBJECT-TYPE SYNTAX SvcTrafficEntry ACCESS not-accessible STATUS mandatory INDEX { svcTLinkNo } ::= { svcTrafficTable 1 } SvcTrafficEntry ::= SEQUENCE { svcTLinkNo INTEGER, svcCBRallowed INTEGER, svcVBRHallowed INTEGER, svcVBRMallowed INTEGER, svcVBRLUBRallowed INTEGER, svcVBRLUBRsubtractpercent INTEGER } svcTLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Lnk Number" ::= {svcTrafficEntry 1 } svcCBRallowed OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows or disallows CBR traffic" DEFVAL { yes } ::= {svcTrafficEntry 2 } svcVBRHallowed OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows or disallows VBR High traffic" DEFVAL { yes } ::= { svcTrafficEntry 3 } svcVBRMallowed OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows or disallows VBR Med traffic" DEFVAL { yes } ::= { svcTrafficEntry 4 } svcVBRLUBRallowed OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows or disallows VBR Low/UBR traffic" DEFVAL { yes } ::= { svcTrafficEntry 5 } svcVBRLUBRsubtractpercent OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies a percentage of BW to be subtracted for VBR Low/UBR traffic" DEFVAL { 0 } ::= { svcTrafficEntry 6 } --___________________________________________________________________________ -- The dv2CE channel table configuration ceTable OBJECT-TYPE SYNTAX SEQUENCE OF CeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration Table for dv2CE Links" ::= { dv2CE 1 } ceEntry OBJECT-TYPE SYNTAX CeEntry ACCESS not-accessible STATUS mandatory INDEX { ceLinkNo } ::= { ceTable 1 } CeEntry ::= SEQUENCE { ceLinkNo INTEGER, ceEnable INTEGER, ceMode INTEGER, cePriority INTEGER, cePvcValid INTEGER, ceDstSlot INTEGER, ceDstLink INTEGER, ceDstVpi VirtualPathIdentifier, ceDstVci VirtualCircuitIdentifier, ceCDV INTEGER, ceCDVMax INTEGER, ceMulticast INTEGER, ceXhInt INTEGER } ceLinkNo OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number for Table Entry" ::= { ceEntry 1 } ceEnable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), restart(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to yes(1) enables the Link" ::= { ceEntry 2 } ceMode OBJECT-TYPE SYNTAX INTEGER { none(1), adaptive(2), srts(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Service Clock Recovery Mode" ::= { ceEntry 3 } cePriority OBJECT-TYPE SYNTAX INTEGER { high(1), low(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to high for normal CBR operation" ::= { ceEntry 4 } cePvcValid OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if valid PVC exists for Link" ::= { ceEntry 5 } ceDstSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Destination Slot for PVC" DEFVAL { 0 } ::= { ceEntry 6 } ceDstLink OBJECT-TYPE SYNTAX INTEGER { link0(1), link1(2), link2(3), link3(4), multicast(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Destination Link for PVC" ::= { ceEntry 7 } ceDstVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Destination VPI for PVC" ::= { ceEntry 8 } ceDstVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Destination VCI for PVC" ::= { ceEntry 9 } ceCDV OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Cell Delay Variation Tolerance" DEFVAL { 4 } ::= { ceEntry 10 } ceCDVMax OBJECT-TYPE SYNTAX INTEGER (1..62) ACCESS read-write STATUS mandatory DESCRIPTION "Cell Delay Variation Tolerance" DEFVAL { 8 } ::= { ceEntry 11 } ceMulticast OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is link part of multicast tree" ::= { ceEntry 24 } ceXhInt OBJECT-TYPE SYNTAX INTEGER { inactive(1), point-to-point(2), uni-root(3), bi-root(4), uni-rt-and-leaf(5), uni-leaf(6), bi-leaf(7), unknown(8) } ACCESS read-only STATUS mandatory DESCRIPTION "XH Interface for Link" ::= { ceEntry 25 } --___________________________________________________________________________ -- The dv2CE channel table status ceStatTable OBJECT-TYPE SYNTAX SEQUENCE OF CeStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "status information about the dv2CE." ::= { dv2CE 2 } ceStatEntry OBJECT-TYPE SYNTAX CeStatEntry ACCESS not-accessible STATUS mandatory INDEX { ceStatPortNo } ::= { ceStatTable 1 } CeStatEntry ::= SEQUENCE { ceStatPortNo INTEGER, ceStatReset INTEGER, ceStatTxState INTEGER, ceStatRxState INTEGER, ceTxCnt Counter, ceRxCnt Counter, ceOflCnt Counter, ceUflCnt Counter, ceDisCnt Counter, ceInvCnt Counter, ceResCnt Counter, ceFifoLvlCnt Counter } ceStatPortNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number for Table Entry" ::= { ceStatEntry 1 } ceStatReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Statistics for Link" ::= { ceStatEntry 2 } ceStatTxState OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), fifostart(3), wideband(4), fifokick(5), narrowband(6), operating(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if data is being received and segmented" ::= { ceStatEntry 3 } ceStatRxState OBJECT-TYPE SYNTAX INTEGER { idle(1), ais(2), operating(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if data being reassembled and transmitted" ::= { ceStatEntry 4 } ceTxCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Cells transmitted from switch fabric" ::= { ceStatEntry 5 } ceRxCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Cells received into switch fabric" ::= { ceStatEntry 6 } ceOflCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which RX FIFO overflowed" ::= { ceStatEntry 7 } ceUflCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which RX FIFO underflowed" ::= { ceStatEntry 8 } ceDisCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which cells were discarded" ::= { ceStatEntry 9 } ceInvCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which cells were invented" ::= { ceStatEntry 10 } ceResCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which AAL1 resync occurred" ::= { ceStatEntry 11 } ceFifoLvlCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Cells currently in FIFO" ::= { ceStatEntry 12 } --___________________________________________________________________________ -- The dv2CE timing status cePriVal OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Primary Clock Valid" ::= { dv2CE 21 } ceSecVal OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Secondary Clock Valid" ::= { dv2CE 22 } ceClkSel OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Clock Select" ::= { dv2CE 23 } ceClkInp OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is there clock input" ::= { dv2CE 24 } ceStr3 OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is there STR3" ::= { dv2CE 25 } --___________________________________________________________________________ -- The dv2VE channel table configuration veTable OBJECT-TYPE SYNTAX SEQUENCE OF VeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration Table for dv2VE Links" ::= { dv2VE 1 } veEntry OBJECT-TYPE SYNTAX VeEntry ACCESS not-accessible STATUS mandatory INDEX { veLinkNo } ::= { veTable 1 } VeEntry ::= SEQUENCE { veLinkNo INTEGER, veEnable INTEGER, veMode INTEGER, vePriority INTEGER, vePvcValid INTEGER, veDstSlot INTEGER, veDstLink INTEGER, veDstVpi VirtualPathIdentifier, veDstVci VirtualCircuitIdentifier, veCDV INTEGER, veCDVMax INTEGER, veMulticast INTEGER, veXhInt INTEGER } veLinkNo OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number for Table Entry" ::= { veEntry 1 } veEnable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), restart(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting to yes(1) enables the Link" ::= { veEntry 2 } veMode OBJECT-TYPE SYNTAX INTEGER { video(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Service Clock Recovery Mode" ::= { veEntry 3 } vePriority OBJECT-TYPE SYNTAX INTEGER { high(1), low(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to high for normal CBR operation" ::= { veEntry 4 } vePvcValid OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if valid PVC exists for Link" ::= { veEntry 5 } veDstSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Destination Slot for PVC" DEFVAL { 0 } ::= { veEntry 6 } veDstLink OBJECT-TYPE SYNTAX INTEGER { link0(1), link1(2), link2(3), link3(4), multicast(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Destination Link for PVC" ::= { veEntry 7 } veDstVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Destination VPI for PVC" ::= { veEntry 8 } veDstVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "Destination VCI for PVC" ::= { veEntry 9 } veCDV OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Cell Delay Variation Tolerance" DEFVAL { 31 } ::= { veEntry 10 } veCDVMax OBJECT-TYPE SYNTAX INTEGER (1..62) ACCESS read-write STATUS mandatory DESCRIPTION "Cell Delay Variation Tolerance" DEFVAL { 62 } ::= { veEntry 11 } veMulticast OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is link part of multicast tree" ::= { veEntry 24 } veXhInt OBJECT-TYPE SYNTAX INTEGER { inactive(1), point-to-point(2), uni-root(3), bi-root(4), uni-rt-and-leaf(5), uni-leaf(6), bi-leaf(7), unknown(8) } ACCESS read-only STATUS mandatory DESCRIPTION "XH Interface for Link" ::= { veEntry 25 } --___________________________________________________________________________ -- The dv2VE channel table status veStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VeStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "status information about the dv2VE." ::= { dv2VE 2 } veStatEntry OBJECT-TYPE SYNTAX VeStatEntry ACCESS not-accessible STATUS mandatory INDEX { veStatPortNo } ::= { veStatTable 1 } VeStatEntry ::= SEQUENCE { veStatPortNo INTEGER, veStatReset INTEGER, veStatTxState INTEGER, veStatRxState INTEGER, veTxCnt Counter, veRxCnt Counter, veOflCnt Counter, veUflCnt Counter, veDisCnt Counter, veInvCnt Counter, veResCnt Counter, veFifoLvlCnt Counter } veStatPortNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link Number for Table Entry" ::= { veStatEntry 1 } veStatReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear Statistics for Link" ::= { veStatEntry 2 } veStatTxState OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), fifostart(3), wideband(4), fifokick(5), narrowband(6), operating(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if data is being received and segmented" ::= { veStatEntry 3 } veStatRxState OBJECT-TYPE SYNTAX INTEGER { idle(1), ais(2), operating(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if data being reassembled and transmitted" ::= { veStatEntry 4 } veTxCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Cells transmitted from switch fabric" ::= { veStatEntry 5 } veRxCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Cells received into switch fabric" ::= { veStatEntry 6 } veOflCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which RX FIFO overflowed or underflowed" ::= { veStatEntry 7 } veUflCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which RX FIFO underflowed" ::= { veStatEntry 8 } veDisCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which cells were discarded" ::= { veStatEntry 9 } veInvCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which cells were invented" ::= { veStatEntry 10 } veResCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of 1S intervals during which AAL1 resync occurred" ::= { veStatEntry 11 } veFifoLvlCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Cells currently in FIFO" ::= { veStatEntry 12 } -- -- Groups suported by the M-JPEG LIM card, for now tie this to the DV2 MIB definition -- The Slip Group jpegSlipIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of SLIP line." ::= { mjlimSlipLine 1 } jpegSlipMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Mask for SLIP line." ::= { mjlimSlipLine 2 } jpegSlipRemoteIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of remote end of SLIP line." ::= { mjlimSlipLine 3 } jpegSlipSpeed OBJECT-TYPE SYNTAX INTEGER { baud2400(1), baud4800(2), baud9600(3), baud19200(4), baud38400(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Baud rate of SLIP serial line." DEFVAL { baud38400 } ::= { mjlimSlipLine 4 } -- The LIM System Group --limSysCurrTime OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..255)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "M-JPEG LIM System Time" -- ::= { mjlimSystem 1 } limSysState OBJECT-TYPE SYNTAX INTEGER { init(1), idle(2), start(3), working(4), terminate(5), fault(6) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM System State" DEFVAL { init } ::= { mjlimSystem 1 } limSysFault OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Hardware Fault - front panel lamp" DEFVAL { off } ::= { mjlimSystem 2 } limSysCompErr OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Compression Error - front panel lamp" DEFVAL { off } ::= { mjlimSystem 3 } limSysDecompErr OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Decompression Error - front panel lamp" DEFVAL { off } ::= { mjlimSystem 4 } limSysVideoIn OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Present - front panel lamp" DEFVAL { off } ::= { mjlimSystem 5 } limSysVideoOut OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Active - front panel lamp" DEFVAL { off } ::= { mjlimSystem 6 } limSysStartMode OBJECT-TYPE SYNTAX INTEGER { auto(1), force-init(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Default Startup mode" DEFVAL { auto } ::= { mjlimSystem 30 } -- The DSP Transfer Control Group sendFileSel OBJECT-TYPE SYNTAX INTEGER { none(1), vjlim-cod(2), vjlca-cod(3) } ACCESS read-write STATUS mandatory DESCRIPTION "File to send" ::= { mjlimControl 1 } jpegCurrentFile OBJECT-TYPE SYNTAX INTEGER { none(1), vjlim-cod(2), vjlca-cod(3) } ACCESS read-only STATUS mandatory DESCRIPTION "File being sent" ::= { mjlimControl 2 } sendFileStat OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of file send" ::= { mjlimControl 3 } sendFileBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes sent" ::= { mjlimControl 4 } jpegReset OBJECT-TYPE SYNTAX INTEGER { no(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Hard/Soft Reset" ::= { mjlimControl 20 } jpegSaveCfg OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Save Configuration" ::= { mjlimControl 21 } jpegLoadCfg OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Load Configuration" ::= { mjlimControl 22 } jpegSWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "JPEG Code Revision" ::= { mjlimControl 40 } -- The Video Input Group vidInJpeg OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input JPEG mode" DEFVAL { start } ::= { vidInCfg 1 } vidInRate OBJECT-TYPE SYNTAX INTEGER { mbps25(1), mbps20(2), mbps15(3), mbps10(4), mbps5(5) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Channel Bit Rate" DEFVAL { mbps20 } ::= { vidInCfg 2 } vidInProvMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Provisioning Mode" DEFVAL { auto } ::= { vidInCfg 3 } vidInFrameRate OBJECT-TYPE SYNTAX INTEGER { full(1) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Frame Rate" DEFVAL { full } ::= { vidInCfg 4 } vidInWindowSize OBJECT-TYPE SYNTAX INTEGER { full-screen(1), constrained(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Window size" DEFVAL { full-screen } ::= { vidInCfg 5 } vidInQuanFactor OBJECT-TYPE SYNTAX INTEGER (10..100) ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Quantization factor" DEFVAL { 30 } ::= { vidInCfg 6 } vidInTransMode OBJECT-TYPE SYNTAX INTEGER { cbr(1), capped-vbr(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Transmit Mode" DEFVAL { cbr } ::= { vidInCfg 7 } vidInStand OBJECT-TYPE SYNTAX INTEGER { ntsc(1), pal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Standard" DEFVAL { ntsc } ::= { vidInCfg 8 } vidInVcrMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input VCR mode" DEFVAL { off } ::= { vidInCfg 9 } vidInAnLpbk OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Analog Loopback" DEFVAL { off } ::= { vidInCfg 10 } vidInTest OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Test Pattern" DEFVAL { off } ::= { vidInCfg 11 } -- The Video Input Status Group vidInState OBJECT-TYPE SYNTAX INTEGER { init(1), idle(2), start(3), working(4), terminate(5), fault(6) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input State" DEFVAL { init } ::= { vidInSta 1 } vidInPres OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Present Indicator" DEFVAL { off } ::= { vidInSta 2 } vidInCurQFactor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Current Quality Factor" ::= { vidInSta 3 } vidInCurFrameRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Current Frame Rate" ::= { vidInSta 4 } vidInAvgBitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Average Bitrate (Mpbs)" ::= { vidInSta 5 } vidInPeakBitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Peak Bitrate (Mbps)" ::= { vidInSta 6 } vidInSubSample OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Field Subsample Status" ::= { vidInSta 7 } vidInCompCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Compressed Packet Count" ::= { vidInSta 8 } vidInSkipCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Skipped Packet Count" ::= { vidInSta 9 } vidInBuffOvf OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Buffer Controller Overflow Count" ::= { vidInSta 10 } vidInImageErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input JPEG Chip FIFO Overflow" ::= { vidInSta 11 } vidInFldSynErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Field Synchronization Errors" ::= { vidInSta 12 } vidInCompErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Compression Errors" ::= { vidInSta 13 } vidInBufLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Buffer Fill Level (%)" ::= { vidInSta 14 } vidInFailReason OBJECT-TYPE SYNTAX INTEGER { none(1), ccube(2), timeout(3), channel(4), xilinx(5), badparms(6), algorithm(7) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Input Fail Reason" DEFVAL { none } ::= { vidInSta 15 } --- The Video Out Configuration Group vidOutJpeg OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output JPEG Mode" DEFVAL { start } ::= { vidOutCfg 1 } vidOutStand OBJECT-TYPE SYNTAX INTEGER { ntsc(1), pal(2), auto-sel(3) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Standard" DEFVAL { ntsc } ::= { vidOutCfg 2 } vidOutSource OBJECT-TYPE SYNTAX INTEGER { genlock(1), through(2), free(3) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Timing Source" DEFVAL { through } ::= { vidOutCfg 3 } vidOutUnLpb OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Uncompressed Loopback" DEFVAL { off } ::= { vidOutCfg 4 } vidOutIdleSrc OBJECT-TYPE SYNTAX INTEGER { black(1), color(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Idle Source" DEFVAL { black } ::= { vidOutCfg 5 } vidOutChnlLpbk OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Channel Loopback" DEFVAL { off } ::= { vidOutCfg 6 } --- The Video Out Status Group vidOutState OBJECT-TYPE SYNTAX INTEGER { init(1), idle(2), start(3), working(4), terminate(5), fault(6) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output state" DEFVAL { init } ::= { vidOutSta 1 } vidOutRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Bitrate (Mbps)" ::= { vidOutSta 2 } vidOutFrameRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Frame Rate" ::= { vidOutSta 3 } vidOutWindowWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Window Width" ::= { vidOutSta 4 } vidOutWindowHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Window Height" ::= { vidOutSta 5 } vidOutChnlLock OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Channel Lock Indicator" ::= { vidOutSta 6 } vidOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Packets Received Count" ::= { vidOutSta 7 } vidOutPlayed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Packets Played Count" ::= { vidOutSta 8 } vidOutSkipped OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Skipped Packet Count" ::= { vidOutSta 9 } vidOutChnlErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Channel Error Count" ::= { vidOutSta 10 } vidOutBuffOvf OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Buffer Controller Overflow Count" ::= { vidOutSta 11 } vidOutImageErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output JPEG Chip Error Count" ::= { vidOutSta 12 } vidOutSeqnoErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Packet Sequence Number Error Count" ::= { vidOutSta 13 } vidOutCurrQFactor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Current JPEG Quantization Factor" ::= { vidOutSta 14 } vidOutStdStat OBJECT-TYPE SYNTAX INTEGER { ntsc(1), pal(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Standard Status" ::= { vidOutSta 15 } vidOutBuffLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Buffer Fill Level (%)" ::= { vidOutSta 16 } vidOutPktsInBuff OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Packets in Buffer" ::= { vidOutSta 17 } vidOutFailReason OBJECT-TYPE SYNTAX INTEGER { none(1), ccube(2), timeout(3), channel(4), xilinx(5), badparms(6), algorithm(7) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Fail Reason" DEFVAL { none } ::= { vidOutSta 18 } vidOutSrcSts OBJECT-TYPE SYNTAX INTEGER { genlock(1), through(2), free(3) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Video Output Timing Source Status" DEFVAL { genlock } ::= { vidOutSta 19 } -- The Audio Input Group audInLoopBack OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Audio Input LoopBack Mode" DEFVAL { off } ::= { audInCfg 1 } -- The Audio Output Group audOutMute OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Audio Output Mute Control" DEFVAL { off } ::= { audOutCfg 1 } audOutDigLpbk OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "M-JPEG LIM Audio Digital Loopback" DEFVAL { off } ::= { audOutCfg 2 } audOutLock OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Audio Output Channel Lock Indicator" DEFVAL { off } ::= { audOutSta 1 } audOutMuteStat OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "M-JPEG LIM Audio Output Mute Status" ::= { audOutSta 2 } -- The Data Configuration Group dataIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of Data Channel." ::= { dataCfg 1 } dataMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " Network Mask for Data Channel." ::= { dataCfg 2 } dataRemoteIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of remote end of Data Channel." ::= { dataCfg 3 } -- *************************************************************************** -- VH320 LIM Objects -- The VH320 System Group limHostRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Host S/W Revision" ::= { vhsystem 1 } limBootRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Boot S/W Revision" ::= { vhsystem 2 } limHwRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Hardware Architecture" ::= { vhsystem 3 } limAction OBJECT-TYPE SYNTAX INTEGER { none(1), reset(2), test(3), mtce(4) } ACCESS read-write STATUS mandatory DESCRIPTION "LIM action" DEFVAL { none } ::= { vhsystem 4 } limState OBJECT-TYPE SYNTAX INTEGER { init(1), testing(2), idle(3), start(4), working(5), terminate(6), fault(7), mtce(8), loading(9), await-framing(10) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM state" DEFVAL { init } ::= { vhsystem 5 } limFault OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM Fault LED" DEFVAL { off } ::= { vhsystem 6 } limFaultReason OBJECT-TYPE SYNTAX INTEGER { none(1), bad-rev(2), hw-fault(3), memory(4), fileio(5), codec-section(6), sw-error(7) } ACCESS read-only STATUS mandatory DESCRIPTION "LIM Fault Reason" ::= { vhsystem 7 } limCodec0 OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-only STATUS mandatory DESCRIPTION "H.320 Codec 0 Active LED" DEFVAL { off } ::= { vhsystem 8 } limCodec1 OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-only STATUS mandatory DESCRIPTION "H.320 Codec 1 Active LED" DEFVAL { on } ::= { vhsystem 9 } limSCmgmt OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Slot Controller Mgmt Link Status" DEFVAL { down } ::= { vhsystem 10 } limSCmgmtData OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Slot Controller Mgmt Information Data State" DEFVAL { idle } ::= { vhsystem 11 } limSCfileXferReq OBJECT-TYPE SYNTAX INTEGER { none(1), vh320-cod(2), vhdev-cod(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Slot Controller Mgmt File Transfer Request" DEFVAL { none } ::= { vhsystem 12 } limSCfileXferStat OBJECT-TYPE SYNTAX INTEGER { idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Slot Controller Mgmt File Transfer State" DEFVAL { idle } ::= { vhsystem 13 } limSCbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot Controller Mgmt File Transfer Byte Count" ::= { vhsystem 14 } -- The VH320 Codec Control Group -- Call Control Table ctrlTable OBJECT-TYPE SYNTAX SEQUENCE OF CtrlEntry ACCESS not-accessible STATUS mandatory ::= { vhcontrol 1 } ctrlEntry OBJECT-TYPE SYNTAX CtrlEntry ACCESS not-accessible STATUS mandatory INDEX { ctrlIndex } ::= { ctrlTable 1 } CtrlEntry ::= SEQUENCE{ ctrlIndex INTEGER, ctrlCodecType INTEGER, ctrlCodecAction INTEGER, ctrlCodecReq INTEGER, ctrlCallType INTEGER, ctrlCodecSta INTEGER, ctrlChnlLpbk INTEGER, ctrlFraming INTEGER, ctrlChnlStat INTEGER, ctrlFaultReason INTEGER } ctrlIndex OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Codec Index" ::= { ctrlEntry 1 } ctrlCodecType OBJECT-TYPE SYNTAX INTEGER { h320(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Codec Type" DEFVAL { h320 } ::= { ctrlEntry 2 } ctrlCodecAction OBJECT-TYPE SYNTAX INTEGER { none(1), reset(2), test(3), mtce(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Codec Action" DEFVAL { none } ::= { ctrlEntry 3 } ctrlCodecReq OBJECT-TYPE SYNTAX INTEGER { connect(1), disconnect(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Codec Request" DEFVAL { connect } ::= { ctrlEntry 4 } ctrlCallType OBJECT-TYPE SYNTAX INTEGER { h0(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Codec Call Type" DEFVAL { h0 } ::= { ctrlEntry 5 } ctrlCodecSta OBJECT-TYPE SYNTAX INTEGER { init(1), testing(2), idle(3), start(4), working(5), terminate(6), fault(7), mtce(8), loading(9), await-framing(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Codec Status" ::= { ctrlEntry 6 } ctrlChnlLpbk OBJECT-TYPE SYNTAX INTEGER { none(1), to-other(2), to-self(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Codec Channel Loopback" DEFVAL { none } ::= { ctrlEntry 7 } ctrlFraming OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Codec H.221 Framing Detected" ::= { ctrlEntry 8 } ctrlChnlStat OBJECT-TYPE SYNTAX INTEGER { down(1), idle(2), up(3), loopback(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Codec Channel Link Status" ::= { ctrlEntry 9 } ctrlFaultReason OBJECT-TYPE SYNTAX INTEGER { none(1), host(2), video(3), audio(4), data(5), fileio(6), mem(7), h221(8), h242(9), tdm(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Codec Fault Reason" ::= { ctrlEntry 10 } -- The Video Table vidTable OBJECT-TYPE SYNTAX SEQUENCE OF VidEntry ACCESS not-accessible STATUS mandatory ::= { vhcontrol 2 } vidEntry OBJECT-TYPE SYNTAX VidEntry ACCESS not-accessible STATUS mandatory INDEX { vidIndex } ::= { vidTable 1 } VidEntry ::= SEQUENCE{ vidIndex INTEGER, vidStandard INTEGER, vidTxVidReq INTEGER, vidRxVidReq INTEGER, vidViewPip INTEGER, vidCompQual INTEGER, vidEncFrameCount Counter, vidDecFrameCount Counter, vidState INTEGER, vidInPresent INTEGER, vidEncBitRate INTEGER, vidDigLpbk INTEGER } vidIndex OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Codec Index" ::= { vidEntry 1 } vidStandard OBJECT-TYPE SYNTAX INTEGER { ntsc(1), pal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Analog Video I/O Standard" DEFVAL { ntsc } ::= { vidEntry 2 } vidTxVidReq OBJECT-TYPE SYNTAX INTEGER { normal(1), freeze(2), mute(3) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Transmit Video Request" DEFVAL { normal } ::= { vidEntry 3 } vidRxVidReq OBJECT-TYPE SYNTAX INTEGER { normal(1), freeze(2), mute(3) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Display Video Request" DEFVAL { normal } ::= { vidEntry 4 } vidViewPip OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 View Self Picture in Picture" DEFVAL { no } ::= { vidEntry 5 } vidCompQual OBJECT-TYPE SYNTAX INTEGER { best-picture(1), best-motion(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Compression Quality" DEFVAL { best-picture } ::= { vidEntry 6 } vidDigLpbk OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Digital Loopback" ::= { vidEntry 7 } vidEncFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Video Encoded Frame Count" ::= { vidEntry 8 } vidDecFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Video Decoded Frame Count" ::= { vidEntry 9 } vidState OBJECT-TYPE SYNTAX INTEGER { init(1), diag(2), idle(3), start(4), working(5), terminate(6), fault(7) } ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Video State" DEFVAL { idle } ::= { vidEntry 10 } vidInPresent OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Video Input Present" DEFVAL { no } ::= { vidEntry 11 } vidEncBitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Encoded Bitrate (bps)" ::= { vidEntry 12 } -- The Audio Table audTable OBJECT-TYPE SYNTAX SEQUENCE OF AudEntry ACCESS not-accessible STATUS mandatory ::= { vhcontrol 3 } audEntry OBJECT-TYPE SYNTAX AudEntry ACCESS not-accessible STATUS mandatory INDEX { audIndex } ::= { audTable 1 } AudEntry ::= SEQUENCE{ audIndex INTEGER, audState INTEGER, audPrefMode INTEGER, audCommMode INTEGER, audBitRate INTEGER, audMuteInReq INTEGER, audMuteOutReq INTEGER, audMuteOutStat INTEGER, audLpbk INTEGER, audInVol INTEGER, audOutVol INTEGER, audInDelay INTEGER, audOutDelay INTEGER, audFaultReason INTEGER } audIndex OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Codec Index" ::= { audEntry 1 } audState OBJECT-TYPE SYNTAX INTEGER { init(1), testing(2), idle(3), start(4), working(5), terminate(6), fault(7), mtce(8), loading(9), await-framing(10) } ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Audio State" ::= { audEntry 2 } audPrefMode OBJECT-TYPE SYNTAX INTEGER { u-law(1), a-law(2), g722(3), g728(4) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Preferred Coding Mode" DEFVAL { g722 } ::= { audEntry 3 } audCommMode OBJECT-TYPE SYNTAX INTEGER { u-law(1), a-law(2), g722(3), g728(4) } ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Audio Common Coding Mode" DEFVAL { g722 } ::= { audEntry 4 } audBitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Audio Bit Rate (bps)" ::= { audEntry 5 } audMuteInReq OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Mute Input Request" DEFVAL { off } ::= { audEntry 6 } audMuteOutReq OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Mute Output Request" ::= { audEntry 7 } audMuteOutStat OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), auto(3) } ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Audio Mute Output Status" ::= { audEntry 8 } audLpbk OBJECT-TYPE SYNTAX INTEGER { none(1), analog-in(2), digital-in(3), compress-in(4), analog-out(5), digital-out(6), compress-out(7) } ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Loopback Request" DEFVAL { none } ::= { audEntry 9 } audInVol OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Input Volume" DEFVAL { 64 } ::= { audEntry 10 } audOutVol OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Output Volume" DEFVAL { 255 } ::= { audEntry 11 } audInDelay OBJECT-TYPE SYNTAX INTEGER (0..200) ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Input Delay Request (ms)" DEFVAL { 150 } ::= { audEntry 12 } audOutDelay OBJECT-TYPE SYNTAX INTEGER (0..200) ACCESS read-write STATUS mandatory DESCRIPTION "VH320 Audio Output Delay Status (ms)" DEFVAL { 150 } ::= { audEntry 13 } audFaultReason OBJECT-TYPE SYNTAX INTEGER { none(1), mem(2), self-test(3), download(4), loopback(5), dsp(6) } ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Audio Fault Reason" DEFVAL { none } ::= { audEntry 14 } -- The Data Port Group dataTable OBJECT-TYPE SYNTAX SEQUENCE OF DataEntry ACCESS not-accessible STATUS mandatory ::= { vhcontrol 4 } dataEntry OBJECT-TYPE SYNTAX DataEntry ACCESS not-accessible STATUS mandatory INDEX { dataIndex } ::= { dataTable 1 } DataEntry ::= SEQUENCE{ dataIndex INTEGER, dataChnlType INTEGER, dataPortSpeed INTEGER, dataPortProt INTEGER, dataHDLCcheck INTEGER, dataChnlStat INTEGER, dataBytesRcvd Counter, dataBytesSent Counter, dataResetStat INTEGER } dataIndex OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Codec Index" ::= { dataEntry 1 } dataChnlType OBJECT-TYPE SYNTAX INTEGER { lsd(1), hsd(2), mlp(3), hmlp(4), none(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Channel Type" ::= { dataEntry 2 } dataPortSpeed OBJECT-TYPE SYNTAX INTEGER { baud-2400(1), baud-9600(2), baud-19200(3), baud-38400(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Port Speed (bps)" DEFVAL { baud-38400 } ::= { dataEntry 3 } dataPortProt OBJECT-TYPE SYNTAX INTEGER { async(1), hdlc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Port Protocol" DEFVAL { async } ::= { dataEntry 4 } dataHDLCcheck OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "HDLC Check CRC" DEFVAL { no } ::= { dataEntry 5 } dataChnlStat OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Data Channel Status" DEFVAL { down } ::= { dataEntry 6 } dataBytesRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data Channel Bytes Received" ::= { dataEntry 7 } dataBytesSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data Channel Bytes Sent" ::= { dataEntry 8 } dataResetStat OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Channel Reset Statistics" ::= { dataEntry 9 } -- The Management Port Group mgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF MgmtEntry ACCESS not-accessible STATUS mandatory ::= { vhmgmt 1 } mgmtEntry OBJECT-TYPE SYNTAX MgmtEntry ACCESS not-accessible STATUS mandatory INDEX { mgmtIndex } ::= { mgmtTable 1 } MgmtEntry ::= SEQUENCE{ mgmtIndex INTEGER, mgmtDescr DisplayString, mgmtPortProt INTEGER, mgmtPortSpeed INTEGER, mgmtPortAddress IpAddress, mgmtAddressMask IpAddress, mgmtRemoteAddress IpAddress, mgmtPortStat INTEGER, mgmtBytesRcvd Counter, mgmtBytesSent Counter, mgmtResetStat INTEGER } mgmtIndex OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "VH320 Management Port Index" ::= { mgmtEntry 1 } mgmtDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " VH320 Management Port Descriptor" ::= { mgmtEntry 2 } mgmtPortProt OBJECT-TYPE SYNTAX INTEGER { async(1), slip(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Management Port Protocol" DEFVAL { async } ::= { mgmtEntry 3 } mgmtPortSpeed OBJECT-TYPE SYNTAX INTEGER { serial-200(1), baud-2400(2), baud-9600(3), baud-19200(4), baud-38400(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Management Port Speed (bps)" DEFVAL { baud-38400 } ::= { mgmtEntry 4 } mgmtPortAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Management Port Address" ::= { mgmtEntry 5 } mgmtAddressMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Management Port Address Mask" ::= { mgmtEntry 6 } mgmtRemoteAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Management Remote Address" ::= { mgmtEntry 7 } mgmtPortStat OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Management Port Status" DEFVAL { down } ::= { mgmtEntry 8 } mgmtBytesRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Management Bytes Received" ::= { mgmtEntry 9 } mgmtBytesSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Management Bytes Sent" ::= { mgmtEntry 10 } mgmtResetStat OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Management Reset Statistics" ::= { mgmtEntry 11 } -- ************************************************************************* -- The OAM config table oamTable OBJECT-TYPE SYNTAX SEQUENCE OF OamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for per-port OAM configuration." ::= { dv2Oam 1 } oamEntry OBJECT-TYPE SYNTAX OamEntry ACCESS not-accessible STATUS mandatory INDEX { oamLinkNo } ::= { oamTable 1 } OamEntry ::= SEQUENCE { oamLinkNo INTEGER, oamSegEndPoint INTEGER, oamVcEndPoint INTEGER, oamAisRdiGeneration INTEGER, oamLastRxType INTEGER, oamLastRxVpi VirtualPathIdentifier, oamLastRxVci VirtualCircuitIdentifier, oamRxCount Counter, oamLastTxType INTEGER, oamLastTxVpi VirtualPathIdentifier, oamLastTxVci VirtualCircuitIdentifier, oamTxCount Counter, oamClearStats INTEGER } oamLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { oamEntry 1 } oamSegEndPoint OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to configure the link as segment end point." DEFVAL { yes } ::= { oamEntry 2 } oamVcEndPoint OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to configure the link as connection end point." DEFVAL { no } ::= { oamEntry 3 } oamAisRdiGeneration OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(1) to generate AIS/RDI up on physical failure." DEFVAL { no } ::= { oamEntry 4 } oamLastRxType OBJECT-TYPE SYNTAX INTEGER { ais(1), rdi(2), loopback(3), continuity-check(4), performance-monitoring(5), unsupported(6), none(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of the last received OAM cell." DEFVAL {none } ::= { oamEntry 5 } oamLastRxVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VPI value of the last received OAM cell." ::= { oamEntry 6 } oamLastRxVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VCI value of the last received OAM cell." ::= { oamEntry 7 } oamRxCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of received OAM cells." ::= { oamEntry 8 } oamLastTxType OBJECT-TYPE SYNTAX INTEGER { ais(1), rdi(2), loopback(3), continuity-check(4), performance-monitoring(5), unsupported(6), none(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of the last transmitted OAM cell." DEFVAL {none } ::= { oamEntry 9 } oamLastTxVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VPI value of the last transmitted OAM cell." ::= { oamEntry 10 } oamLastTxVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "VCI value of the last transmitted OAM cell." ::= { oamEntry 11 } oamTxCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of transmitted OAM cells." ::= { oamEntry 12 } oamClearStats OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to yes(2) to clear OAM Tx and Rx Statistics." ::= { oamEntry 13 } oamLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF OamLoopbackEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to configure and control loopback test. Change Test Status to Start Test(1) to initiate loopback test." ::= { dv2Oam 2 } oamLoopbackEntry OBJECT-TYPE SYNTAX OamLoopbackEntry ACCESS not-accessible STATUS mandatory INDEX { oamLoopbackLinkNo } ::= { oamLoopbackTable 1 } OamLoopbackEntry ::= SEQUENCE { oamLoopbackLinkNo INTEGER, oamLoopbackVpi VirtualPathIdentifier, oamLoopbackVci VirtualCircuitIdentifier, oamLoopbackSpan INTEGER, oamLoopbackMaxNumCells INTEGER, oamLoopbackNumCellsSent INTEGER, oamLoopbackTimeOut INTEGER, oamLoopbackActive INTEGER, oamLoopbackResult INTEGER, oamLoopbackLocId INTEGER } oamLoopbackLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { oamLoopbackEntry 1 } oamLoopbackVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "VPI value for the loopback cells to send." DEFVAL { 0 } ::= { oamLoopbackEntry 2 } oamLoopbackVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "VCI value for the loopback cells to send." DEFVAL { 5 } ::= { oamLoopbackEntry 3 } oamLoopbackSpan OBJECT-TYPE SYNTAX INTEGER { segment(4), end-to-end(5), location-id(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Flow span for the loopback cells to send." DEFVAL { segment } ::= { oamLoopbackEntry 4 } oamLoopbackMaxNumCells OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of loopback cells to send." DEFVAL { 2 } ::= { oamLoopbackEntry 5 } oamLoopbackNumCellsSent OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-only STATUS mandatory DESCRIPTION "Number of loopback cells sent." DEFVAL { 0 } ::= { oamLoopbackEntry 6 } oamLoopbackTimeOut OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds to wait for loopback cells to return." DEFVAL { 5 } ::= { oamLoopbackEntry 7 } oamLoopbackActive OBJECT-TYPE SYNTAX INTEGER { start-test(1), complete(2), idle(3), under-test(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Change to Start Test to run loopback test." DEFVAL { idle } ::= { oamLoopbackEntry 8 } oamLoopbackResult OBJECT-TYPE SYNTAX INTEGER { pass(1), fail(2), physical-loopback-detected(3), unknown(4), vpi-range-error(5), vp-is-invalid(6), vci-range-error(7), vci-and-span-mismatch(8), vpc-not-established(9), vcc-not-established(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Loopback test result." DEFVAL { unknown } ::= { oamLoopbackEntry 9 } oamLoopbackLocId OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Location Node ID for loopback point." DEFVAL { 0 } ::= { oamLoopbackEntry 10 } oamDisable OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "yes(2) will disable the oam for entire slot." DEFVAL { no } ::= { dv2Oam 3 } --***** New OAM table ****** -- *** VCa port *** oamVcaTable OBJECT-TYPE SYNTAX SEQUENCE OF OamVcaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for per-port OAM configuration." ::= { dv2Oam 4 } oamVcaEntry OBJECT-TYPE SYNTAX OamVcaEntry ACCESS not-accessible STATUS mandatory INDEX { oamVcaVpi, oamVcaVci } ::= { oamVcaTable 1 } OamVcaEntry ::= SEQUENCE { oamVcaVpi VirtualPathIdentifier, oamVcaVci VirtualCircuitIdentifier, oamVcaConnectionType INTEGER, oamVcaVpcEndPoint INTEGER, oamVcaAisRdiGeneration INTEGER, oamVcaAisRdiState INTEGER, oamVcaDefectType INTEGER, oamVcaDefectNode INTEGER, oamVcaDefectSlot INTEGER, oamVcaDefectLink INTEGER, oamVcaTrapEnable INTEGER, oamVcaCC INTEGER, oamVcaCCState INTEGER, oamVcaPM INTEGER, oamVcaPMBlockSize INTEGER, oamVcaPMState INTEGER, oamVcaBkwRptLosCells INTEGER, oamVcaBkwRptMisCells INTEGER, oamVcaBkwRptBip16 INTEGER, oamVcaBkwRptSevErr INTEGER } oamVcaVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VPI for this configuration." ::= { oamVcaEntry 1 } oamVcaVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VCI for this configuration." ::= { oamVcaEntry 2 } oamVcaConnectionType OBJECT-TYPE SYNTAX INTEGER { connection-point(1), segment-endpoint(2), end-to-end-endpoint(3), pass-thru(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set End point configuration on hardware per VPC/VCC" DEFVAL { connection-point } ::= { oamVcaEntry 3 } oamVcaVpcEndPoint OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set yes(1) to configure the VC to VPC end point." DEFVAL { no } ::= { oamVcaEntry 4 } oamVcaAisRdiGeneration OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "AIS/RDI disable or enable with or without traps." DEFVAL { disable } ::= { oamVcaEntry 5 } oamVcaAisRdiState OBJECT-TYPE SYNTAX INTEGER { none(1), ais(2), rdi(3) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI state for this VP/VC." ::= { oamVcaEntry 6 } oamVcaDefectType OBJECT-TYPE SYNTAX INTEGER { none(1), link-down(2), loss-of-continuity(3), unknown(4) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI defect type." ::= { oamVcaEntry 7 } oamVcaDefectNode OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI location." ::= { oamVcaEntry 8 } oamVcaDefectSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI location." ::= { oamVcaEntry 9 } oamVcaDefectLink OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI location." ::= { oamVcaEntry 10 } oamVcaTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set enable to generate trap when AIS/RDI received." DEFVAL { disable } ::= { oamVcaEntry 11 } oamVcaCC OBJECT-TYPE SYNTAX INTEGER { none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-bidir-seg-cell(6), act-bidir-ee-cell(7), act-source-seg-manual(8), act-source-ee-manual(9), act-sink-seg-manual(10), act-sink-ee-manual(11), act-bidir-seg-manual(12), act-bidir-ee-manual(13) } ACCESS read-write STATUS mandatory DESCRIPTION "Activate segment or end to end Continuity Checks." DEFVAL { none } ::= { oamVcaEntry 12 } oamVcaCCState OBJECT-TYPE SYNTAX INTEGER { not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Continuity Check state." ::= { oamVcaEntry 13 } oamVcaPM OBJECT-TYPE SYNTAX INTEGER { none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-source-seg-manual(6), act-source-ee-manual(7), act-sink-seg-manual(8), act-sink-ee-manual(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Activate segment or end to end Performance Monitoring." DEFVAL { none } ::= { oamVcaEntry 14 } oamVcaPMBlockSize OBJECT-TYPE SYNTAX INTEGER { size128(1), size256(2), size512(3), size1024(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Performance Monitoring block size." DEFVAL { size128 } ::= { oamVcaEntry 15 } oamVcaPMState OBJECT-TYPE SYNTAX INTEGER { not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Continuity Check state." ::= { oamVcaEntry 16 } oamVcaBkwRptLosCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting loss of cell." ::= { oamVcaEntry 17 } oamVcaBkwRptMisCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting misinserted cell." ::= { oamVcaEntry 18 } oamVcaBkwRptBip16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting BIP-16 violations." ::= { oamVcaEntry 19 } oamVcaBkwRptSevErr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting Severly Errored Cells." ::= { oamVcaEntry 20 } -- *** VCb port *** oamVcbTable OBJECT-TYPE SYNTAX SEQUENCE OF OamVcbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for per-port OAM configuration." ::= { dv2Oam 5 } oamVcbEntry OBJECT-TYPE SYNTAX OamVcbEntry ACCESS not-accessible STATUS mandatory INDEX { oamVcbVpi, oamVcbVci } ::= { oamVcbTable 1 } OamVcbEntry ::= SEQUENCE { oamVcbVpi VirtualPathIdentifier, oamVcbVci VirtualCircuitIdentifier, oamVcbConnectionType INTEGER, oamVcbVpcEndPoint INTEGER, oamVcbAisRdiGeneration INTEGER, oamVcbAisRdiState INTEGER, oamVcbDefectType INTEGER, oamVcbDefectNode INTEGER, oamVcbDefectSlot INTEGER, oamVcbDefectLink INTEGER, oamVcbTrapEnable INTEGER, oamVcbCC INTEGER, oamVcbCCState INTEGER, oamVcbPM INTEGER, oamVcbPMBlockSize INTEGER, oamVcbPMState INTEGER, oamVcbBkwRptLosCells INTEGER, oamVcbBkwRptMisCells INTEGER, oamVcbBkwRptBip16 INTEGER, oamVcbBkwRptSevErr INTEGER } oamVcbVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VPI for this configuration." ::= { oamVcbEntry 1 } oamVcbVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-only STATUS mandatory DESCRIPTION "The VCI for this configuration." ::= { oamVcbEntry 2 } oamVcbConnectionType OBJECT-TYPE SYNTAX INTEGER { connection-point(1), segment-endpoint(2), end-to-end-endpoint(3), pass-thru(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set End point configuration on hardware per VPC/VCC" DEFVAL { connection-point } ::= { oamVcbEntry 3 } oamVcbVpcEndPoint OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set yes(1) to configure the VC to VPC end point." DEFVAL { no } ::= { oamVcbEntry 4 } oamVcbAisRdiGeneration OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "AIS/RDI disable or enable with or without traps." DEFVAL { disable } ::= { oamVcbEntry 5 } oamVcbAisRdiState OBJECT-TYPE SYNTAX INTEGER { none(1), ais(2), rdi(3) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI state for this VP/VC." ::= { oamVcbEntry 6 } oamVcbDefectType OBJECT-TYPE SYNTAX INTEGER { none(1), link-down(2), loss-of-continuity(3), unknown(4) } ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI defect type." ::= { oamVcbEntry 7 } oamVcbDefectNode OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI location." ::= { oamVcbEntry 8 } oamVcbDefectSlot OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI location." ::= { oamVcbEntry 9 } oamVcbDefectLink OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "AIS/RDI location." ::= { oamVcbEntry 10 } oamVcbTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set enable to generate trap when AIS/RDI received." DEFVAL { disable } ::= { oamVcbEntry 11 } oamVcbCC OBJECT-TYPE SYNTAX INTEGER { none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-bidir-seg-cell(6), act-bidir-ee-cell(7), act-source-seg-manual(8), act-source-ee-manual(9), act-sink-seg-manual(10), act-sink-ee-manual(11), act-bidir-seg-manual(12), act-bidir-ee-manual(13) } ACCESS read-write STATUS mandatory DESCRIPTION "Activate segment or end to end Continuity Checks." DEFVAL { none } ::= { oamVcbEntry 12 } oamVcbCCState OBJECT-TYPE SYNTAX INTEGER { not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Continuity Check state." ::= { oamVcbEntry 13 } oamVcbPM OBJECT-TYPE SYNTAX INTEGER { none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-source-seg-manual(6), act-source-ee-manual(7), act-sink-seg-manual(8), act-sink-ee-manual(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Activate segment or end to end Performance Monitoring." DEFVAL { none } ::= { oamVcbEntry 14 } oamVcbPMBlockSize OBJECT-TYPE SYNTAX INTEGER { size128(1), size256(2), size512(3), size1024(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Performance Monitoring block size." DEFVAL { size128 } ::= { oamVcbEntry 15 } oamVcbPMState OBJECT-TYPE SYNTAX INTEGER { not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Continuity Check state." ::= { oamVcbEntry 16 } oamVcbBkwRptLosCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting loss of cell." ::= { oamVcbEntry 17 } oamVcbBkwRptMisCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting misinserted cell." ::= { oamVcbEntry 18 } oamVcbBkwRptBip16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting BIP-16 violations." ::= { oamVcbEntry 19 } oamVcbBkwRptSevErr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backward Reporting Severly Errored Cells." ::= { oamVcbEntry 20 } -- ************************************************************************************************************************ -- The LMI config and status table lmiTable OBJECT-TYPE SYNTAX SEQUENCE OF LmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to control ILMI configuration." ::= { dv2Lmi 1 } lmiEntry OBJECT-TYPE SYNTAX LmiEntry ACCESS not-accessible STATUS mandatory INDEX { lmiLinkNo } ::= { lmiTable 1 } LmiEntry ::= SEQUENCE { lmiLinkNo INTEGER, lmiVpi VirtualPathIdentifier, lmiVci VirtualCircuitIdentifier, lmiType INTEGER, lmiState INTEGER, lmiFormat INTEGER, lmiPrefix E164SUB, lmiOnOff INTEGER, lmiPollPeriod INTEGER, lmiNoRspDown INTEGER, lmiLinkMgmt INTEGER, lmiConnectivity INTEGER, lmiPrefixMod E164, lmiEsi E164 } lmiLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { lmiEntry 1 } lmiVpi OBJECT-TYPE SYNTAX VirtualPathIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The VPI used for ILMI." DEFVAL { 0 } ::= { lmiEntry 2 } lmiVci OBJECT-TYPE SYNTAX VirtualCircuitIdentifier ACCESS read-write STATUS mandatory DESCRIPTION "The VCI used for ILMI." DEFVAL { 16 } ::= { lmiEntry 3 } lmiType OBJECT-TYPE SYNTAX INTEGER { network-side(1), user-side(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to network side (1) to configure the link as network side ILMI." DEFVAL { network-side } ::= { lmiEntry 4 } lmiState OBJECT-TYPE SYNTAX INTEGER { initialized(1), connecting(2), registered(3), registering(4), deregistering(5), polling(6), disconnecting(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of ILMI for this link." DEFVAL { initialized } ::= { lmiEntry 5 } lmiFormat OBJECT-TYPE SYNTAX INTEGER { nsap-e-164(1), nsap-dcc(2), nsap-icd(3), non-nsap-e-164(4) } ACCESS read-write STATUS mandatory DESCRIPTION "ILMI address format." DEFVAL { nsap-icd } ::= { lmiEntry 6 } lmiPrefix OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "Default Network prefix to use." ::= { lmiEntry 7 } lmiOnOff OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), re-register(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Turn on/off ILMI." DEFVAL { on } ::= { lmiEntry 8 } lmiPollPeriod OBJECT-TYPE SYNTAX INTEGER (3..10) ACCESS read-write STATUS mandatory DESCRIPTION "Period in seconds to send polling request for link management." DEFVAL { 5 } ::= { lmiEntry 9 } lmiNoRspDown OBJECT-TYPE SYNTAX INTEGER (2..10) ACCESS read-write STATUS mandatory DESCRIPTION "Number of failed polls (no response) before declaration of link down." DEFVAL { 4 } ::= { lmiEntry 10 } lmiLinkMgmt OBJECT-TYPE SYNTAX INTEGER { on(2), off(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Turn on/off link management." DEFVAL { on } ::= { lmiEntry 11 } lmiConnectivity OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "ATM interface status." DEFVAL { down } ::= { lmiEntry 12 } lmiPrefixMod OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "Modifiable Network prefix to use. MUST BE 26 DIGITS" ::= { lmiEntry 13 } lmiEsi OBJECT-TYPE SYNTAX E164 ACCESS read-write STATUS mandatory DESCRIPTION "ESI field to use on User side. MUST BE 12 DIGITS" ::= { lmiEntry 14 } lmiNetSideTable OBJECT-TYPE SYNTAX SEQUENCE OF LmiNetSideEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to configure and control network side ILMI." ::= { dv2Lmi 2 } lmiNetSideEntry OBJECT-TYPE SYNTAX LmiNetSideEntry ACCESS not-accessible STATUS mandatory INDEX { lmiNetSideLinkNo, lmiNetSidePrefixId } ::= { lmiNetSideTable 1 } LmiNetSideEntry ::= SEQUENCE { lmiNetSideLinkNo INTEGER, lmiNetSidePrefixId INTEGER, lmiNetSidePrefix E164SUB, lmiNetSidePrefixStatus INTEGER } lmiNetSideLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { lmiNetSideEntry 1 } lmiNetSidePrefixId OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-only STATUS mandatory DESCRIPTION "Network prefix identification number." ::= { lmiNetSideEntry 2 } lmiNetSidePrefix OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "Network prefix to register or de-register." ::= { lmiNetSideEntry 3 } lmiNetSidePrefixStatus OBJECT-TYPE SYNTAX INTEGER { start-registration(1), start-deregistration(2), valid(3), invalid(4), registered(5), deregistered(6), time-out-failure(7), unknown(8), not-allowed(9), rejected(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to register to send the prefix to the user side; set to de-register to remove the prefix from the user side." DEFVAL { unknown } ::= { lmiNetSideEntry 4 } lmiUserSideTable OBJECT-TYPE SYNTAX SEQUENCE OF LmiUserSideEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to configure and control user side ILMI." ::= { dv2Lmi 3 } lmiUserSideEntry OBJECT-TYPE SYNTAX LmiUserSideEntry ACCESS not-accessible STATUS mandatory INDEX { lmiUserSideLinkNo, lmiUserSideAddressId } ::= { lmiUserSideTable 1 } LmiUserSideEntry ::= SEQUENCE { lmiUserSideLinkNo INTEGER, lmiUserSideAddressId INTEGER, lmiUserSideAddress E164SUB, lmiUserSideAddressStatus INTEGER } lmiUserSideLinkNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { lmiUserSideEntry 1 } lmiUserSideAddressId OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "The link number for this configuration." ::= { lmiUserSideEntry 2 } lmiUserSideAddress OBJECT-TYPE SYNTAX E164SUB ACCESS read-only STATUS mandatory DESCRIPTION "ATM address to register or de-register." ::= { lmiUserSideEntry 3 } lmiUserSideAddressStatus OBJECT-TYPE SYNTAX INTEGER { start-registration(1), start-deregistration(2), valid(3), invalid(4), registered(5), deregistered(6), time-out-failure(7), unknown(8), not-allowed(9), rejected(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Set to valid to register the address to the network side; set to invalid to de-register the address from the network side." DEFVAL { unknown } ::= { lmiUserSideEntry 4 } --___________________________________________________________________________ -- -- The Alarm Handler Node Alarm Status' --___________________________________________________________________________ alarmNodeCrit OBJECT-TYPE SYNTAX INTEGER { clr(1), crit(2), crit-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Node Critical Alarm Status" ::= { dv2AlarmHandler 1 } alarmNodeMajor OBJECT-TYPE SYNTAX INTEGER { clr(1), maj(2), maj-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Node Major Alarm Status" ::= { dv2AlarmHandler 2 } alarmNodeMinor OBJECT-TYPE SYNTAX INTEGER { clr(1), min(2), min-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Node Minor Alarm Status" ::= { dv2AlarmHandler 3 } --___________________________________________________________________________ -- -- The Alarm Handler Slot Status Table --___________________________________________________________________________ alarmStatTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for Alarm Handler status" ::= { dv2AlarmHandler 4 } alarmStatEntry OBJECT-TYPE SYNTAX AlarmStatEntry ACCESS not-accessible STATUS mandatory INDEX { alrStatSlotNo } ::= { alarmStatTable 1 } AlarmStatEntry ::= SEQUENCE { alrStatSlotNo INTEGER, slotCritStatus INTEGER, slotMajorStatus INTEGER, slotMinorStatus INTEGER, link0CritStatus INTEGER, link0MajorStatus INTEGER, link0MinorStatus INTEGER, link1CritStatus INTEGER, link1MajorStatus INTEGER, link1MinorStatus INTEGER, link2CritStatus INTEGER, link2MajorStatus INTEGER, link2MinorStatus INTEGER, link3CritStatus INTEGER, link3MajorStatus INTEGER, link3MinorStatus INTEGER } alrStatSlotNo OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Slot Number" ::= { alarmStatEntry 1 } slotCritStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), crit(2), crit-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Slot Critical Alarm Status" ::= { alarmStatEntry 2 } slotMajorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), maj(2), maj-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Slot Major Alarm Status" ::= { alarmStatEntry 3 } slotMinorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), min(2), min-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Slot Minor Alarm Status" ::= { alarmStatEntry 4 } link0CritStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), crit(2), crit-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 0 Critical Alarm Status" ::= { alarmStatEntry 5 } link0MajorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), maj(2), maj-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 0 Major Alarm Status" ::= { alarmStatEntry 6 } link0MinorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), min(2), min-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 0 Minor Alarm Status" ::= { alarmStatEntry 7 } link1CritStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), crit(2), crit-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 1 Critical Alarm Status" ::= { alarmStatEntry 8 } link1MajorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), maj(2), maj-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 1 Major Alarm Status" ::= { alarmStatEntry 9 } link1MinorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), min(2), min-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 1 Minor Alarm Status" ::= { alarmStatEntry 10 } link2CritStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), crit(2), crit-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 2 Critical Alarm Status" ::= { alarmStatEntry 11 } link2MajorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), maj(2), maj-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 2 Major Alarm Status" ::= { alarmStatEntry 12 } link2MinorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), min(2), min-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 2 Minor Alarm Status" ::= { alarmStatEntry 13 } link3CritStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), crit(2), crit-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 3 Critical Alarm Status" ::= { alarmStatEntry 14 } link3MajorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), maj(2), maj-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 3 Major Alarm Status" ::= { alarmStatEntry 15 } link3MinorStatus OBJECT-TYPE SYNTAX INTEGER { clr(1), min(2), min-aco(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Link 3 Minor Alarm Status" ::= { alarmStatEntry 16 } --___________________________________________________________________________ -- -- The Alarm Handler Node ACO Status --___________________________________________________________________________ alarmNodeACO OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Node ACO Status" ::= { dv2AlarmHandler 5 } --___________________________________________________________________________ -- -- The Alarm Handler ACO Table --___________________________________________________________________________ alarmACOTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmACOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for the Alarm Handler ACO" ::= { dv2AlarmHandler 6 } alarmACOEntry OBJECT-TYPE SYNTAX AlarmACOEntry ACCESS not-accessible STATUS mandatory INDEX { alrACOslotNo } ::= { alarmACOTable 1 } AlarmACOEntry ::= SEQUENCE { alrACOslotNo INTEGER, alrACOslotACO INTEGER, alrACOlink0ACO INTEGER, alrACOlink1ACO INTEGER, alrACOlink2ACO INTEGER, alrACOlink3ACO INTEGER } alrACOslotNo OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Slot Number" ::= { alarmACOEntry 1 } alrACOslotACO OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Slot ACO Status" ::= { alarmACOEntry 2 } alrACOlink0ACO OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 0 ACO Status" ::= { alarmACOEntry 3 } alrACOlink1ACO OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 1 ACO Status" ::= { alarmACOEntry 4 } alrACOlink2ACO OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 2 ACO Status" ::= { alarmACOEntry 5 } alrACOlink3ACO OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link 3 ACO Status" ::= { alarmACOEntry 6 } --___________________________________________________________________________ -- -- The User Status/Alarm Input Table --___________________________________________________________________________ userStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF UserStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for the User Status Inputs" ::= { dv2AlarmHandler 7 } userStatusEntry OBJECT-TYPE SYNTAX UserStatusEntry ACCESS not-accessible STATUS mandatory INDEX { userInputNo } ::= { userStatusTable 1 } UserStatusEntry ::= SEQUENCE { userInputNo INTEGER, userInputEnable INTEGER, userInputTrapEnable INTEGER, userInputTrapDesc DisplayString, userInputActiveState INTEGER, userInputAlrClass INTEGER, userInputStatus INTEGER } userInputNo OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "User Status Input Number" ::= { userStatusEntry 1 } userInputEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), not-applicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable User Status Input" DEFVAL { not-applicable } ::= { userStatusEntry 2 } userInputTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable User Defined Trap/Event" DEFVAL { disabled } ::= { userStatusEntry 3 } userInputTrapDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Description string for trap/event" ::= { userStatusEntry 4 } userInputActiveState OBJECT-TYPE SYNTAX INTEGER { active-closed(1), active-open(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Alarm active state of user input relay switch" ::= { userStatusEntry 5 } userInputAlrClass OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), informational(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Classification of Status/Alarm Input" DEFVAL { informational } ::= { userStatusEntry 10 } userInputStatus OBJECT-TYPE SYNTAX INTEGER { clear(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current Status of Status/Alarm Input" ::= { userStatusEntry 11 } --___________________________________________________________________________ -- -- Scan Alarm Classification File --___________________________________________________________________________ alarmScanFile OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Rescan the alr_class.txt file" ::= { dv2AlarmHandler 8 } --__________________________________________________________________________ -- -- CAC support group -- --__________________________________________________________________________ cacCurrentEbtId OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Current EBT file ID code. cacCurrentEbtId holds the EBT file ID code of the EBT file currently in memory in a verified state. The CAC application is responsible for maintaining the state of this variable. If there is a verified EBT in memory cacCurrentEbtId will still hold the EBT file's ID code even if the CAC is disabled or the CAC version is scr-pcr. If there is no EBT in memory or the verification was unsuccessful then the value of cacCurrentEbtId is zero (0)." ::= { dv2Cac 1 } cacEbtCommand OBJECT-TYPE SYNTAX INTEGER { none(1), load-EBT(2), dump-EBT(3), delete-EBT(4) } ACCESS read-write STATUS mandatory DESCRIPTION "EBT file command. This field, normally with the value none, may be set by the manager to: * load-ebt to initiate the loading of a new EBT file into memory. * dump-ebt to initiate the dump of the EBT memory content into flash. * delete-ebt to cause an EBT file to be deleted in the flash. The value of cacEbtCommand will return to none when the EBT file command has been completed." ::= { dv2Cac 2 } cacCommandEbtId OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Command EBT file ID code. cacCommandEbtId is written to by the manager to identify the EBT file in the flash that should be loaded or deleted. When the cacEbtCommand MIB item is set to either load-ebt or delete-ebt, the CAC software attempts to load or delete the EBT file named ebXXXXX.bin from flash, where XXXXX is the value cacCommandEbtId padded to five digits with leading zeros. The value zero (0) is not a valid EBT file ID code and is reserved to indicate that EBT file ID code has not been specified." ::= { dv2Cac 3 } cacEbtState OBJECT-TYPE SYNTAX INTEGER { uninitialized(1), initializing(2), loading(3), ready(4), unusable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the CAC. The state: * uninitialized is an initial MIB value which is never returned to without starting from a new MIB. * initializing indicates the initial part of the CAC boot. * loading indicates that an EBT file is being loaded. * ready indicates that a valid EBT is in memory. In this state the current EBT file ID code shows the ID code of the EBT in memory. * unusable is reached after an unsuccessful load and indicates that the data in the EBT memory block is unusable (in this state current EBT file ID code shows 0)." DEFVAL { uninitialized } ::= { dv2Cac 4 } cacErrorCode OBJECT-TYPE SYNTAX INTEGER { no-error(1), nonexistent-file(2), bad-file-length(3), copy-corrupted(4), nunused-cbtdwoebtid(5), nunused-cinvalid(6), nebtid-uninit-cstays(7), ninvalid-cstays(8), ninvalid-cebtid-uninit(9), ninvalid-cinvalid(10), ninvalid-cnoerror(11), link-not-ready(12), link-not-configuring(13), ebt-not-loaded(14), class-not-found(15), dump-fs-error(16), bad-ebt-command(17), delete-fs-error(18), ebt-id-invalid(19) } ACCESS read-only STATUS mandatory DESCRIPTION "Error code. Error codes are produced at certain stages in the CAC application. The interpretation of the error codes is: Terms: 'ebXXXXX.bin' : binary file in flash data structure: EBT_file_template based structure * no-error: no error encountered. * nonexistent-file: the 'ebXXXXX.bin' file not found in the flash, during APEX boot or MIB EBT load request. * bad-file-length: mismatch in file length specified within 'ebXXXXX.bin' and the pre-specified file length. Occurs while loading file into data structures. * copy-corrupted: copying of data from 'ebXXXXX.bin' into the data structure, EBT_file_template did not proceed smoothly and the data structure is now corrupted. * nunused-cbtdwoEBTid: command EBT id not used and current EBT id is 0. The CAC booted without valid EBT values in the data structure. Occurs during boot while loading file into data structures. * nunused-cinvalid: command EBT id not used. The file eb'current EBT id'.bin contains invalid data. Occurs just after the EBT file got loaded into the data structure, when the verification of values in the data structure takes place. * nEBTid-uninit-cstays: command EBT id is 0 and the data structures remain unchanged. Occurs when mib item cacTableload is switched to yes. * ninvalid-cstays: eb'command EBT id'.bin contains invalid data and the data structures remain unchanged. Occurs when mib item cacTableload is switched to yes. * ninvalid-cEBTid-uninit: eb'command EBT id'.bin contains invalid data and the current EBT id is zero. This means that data structure is corrupted. Occurs when mib item cacTableload is switched to yes. * ninvalid-cinvalid: both eb'command EBT id'.bin and eb'current EBT id'.bin contains invalid data. The data structure is corrupted. Occurs when mib item cacTableload is switched to yes. * ninvalid-cnoerror: eb'command EBT id'.bin contains invalid data and the eb'current EBT id'.bin is loaded successfully. Occurs when mib item cacTableload is switched to yes. * link-not-ready: it is a runtime error which states that link is not ready for configuration. * link-not-configuring: it is a runtime error which states that link is not in configuring mode and therefore the recalculation of EBT or scr-pcr sums is not possible. * EBT-not-loaded: it is a runtime error which states that the data structure does not contain valid data. This occurs when the EBT enable mib switch is turned to 'yes' or the cac version mib item is switched to EBT. * class-not-found: this runtime error indicates that during the processing of allocate, deallocate or change functions, a class corresponding to SCR, PCR or MBS was not found. The effective bandwidth used in this situation is the same as a CBR allocation using the attempted connection's PCR. * dump-fs-error: this error indicates that a file system error (e.g. the file system became full) during the EBT file dump function. The dump file was deleted after the file system error was detected." DEFVAL { no-error } ::= { dv2Cac 5 } cacPerLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF CacPerLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table containing per link data. Contains per link specific data" ::= { dv2Cac 6 } cacPerLinkEntry OBJECT-TYPE SYNTAX CacPerLinkEntry ACCESS not-accessible STATUS mandatory INDEX {cacLinkNo} ::= { cacPerLinkTable 1 } CacPerLinkEntry ::= SEQUENCE { cacLinkNo INTEGER, cacLinkSumE10 Gauge, cacLinkSumE1T Gauge, cacLinkObfPvc1 INTEGER, cacLinkObfSvc1 INTEGER, cacLinkSumE20 Gauge, cacLinkSumE2T Gauge, cacLinkObfPvc2 INTEGER, cacLinkObfSvc2 INTEGER, cacLinkTotalBwScrPcr INTEGER, cacCurrentLinkUsage INTEGER, cacMaxLinkUsage INTEGER, cacLinkReset INTEGER, cacLinkVersion INTEGER, cacLinkEnable INTEGER, cacLinkSignalMode INTEGER, cacLinkState INTEGER } cacLinkNo OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Link number. cacLinkNo is the index (0..3) to the array of link data." ::= { cacPerLinkEntry 1 } cacLinkSumE10 OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Running sum of e10. cacSumE10 zero loss effective bandwidth for high priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero." ::= { cacPerLinkEntry 2 } cacLinkSumE1T OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Running sum of e1T. cacSumE1T tangent effective bandwidth for high priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero." ::= { cacPerLinkEntry 3 } cacLinkObfPvc1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Utilization factor for high priority pvc. Utilization factor for PVCs and SPVCs for the high priority queue." DEFVAL { 100 } ::= { cacPerLinkEntry 4 } cacLinkObfSvc1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Utilization factor for high priority svc. Utilization factor for SVCs for the high priority queue." DEFVAL { 100 } ::= { cacPerLinkEntry 5 } cacLinkSumE20 OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Running sum of e20. cacSumE20 zero loss effective bandwidth for low priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero." ::= { cacPerLinkEntry 6 } cacLinkSumE2T OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Running sum of e2T. cacSumE1T zero tangent effective bandwidth for low priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero." ::= { cacPerLinkEntry 7 } cacLinkObfPvc2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Utilization factor for low priority pvc. Utilization factor for PVCs and SPVCs for the low priority queue." DEFVAL { 100 } ::= { cacPerLinkEntry 8 } cacLinkObfSvc2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Utilization factor for low priority svc. Utilization factor for SVCs for the low priority queue." DEFVAL { 100 } ::= { cacPerLinkEntry 9 } cacLinkTotalBwScrPcr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total bw allocation on the link by scr-pcr CAC. cacTotalBwScrPcr is the total bandwidth allocated to extant connections when the CAC is enabled and when the SCR-PCR CAC is being used. Its value is zero if CAC is disabled or the EBT CAC mode is used." ::= { cacPerLinkEntry 10 } cacCurrentLinkUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current link bandwidth allocation. It is the current indication of bandwidth allocation on a link based on the formula using effective bandwidths" ::= { cacPerLinkEntry 11 } cacMaxLinkUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Max link bw allocation since last reset or card boot. cacMaxLinkUsage shows the maximum value that cacCurrentLinkUsage has reached since cacMaxLinkUsage was last reset." ::= { cacPerLinkEntry 12 } cacLinkReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reload maximum link usage from current allocation. cacReset resets cacMaxLinkUsage, after the reset cacMaxLinkUsage shows the same value as cacCurrentLinkUsage." DEFVAL { no } ::= {cacPerLinkEntry 13 } cacLinkVersion OBJECT-TYPE SYNTAX INTEGER { ebt(1), scr-pcr(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Use EB CAC or scr-pcr CAC? The per-link variable cacVersion may take on the values * SCR-PCR indicating that the old, pre Rel 4.2 CAC based on SCR and PCR values, is in operation or * EBT indicating that the new CAC based on effective bandwidths is used. cacVersion may be set by the manager. If cacVersion is set to EBT by the manager it will revert to SCR-PCR unless a valid EBT is currently available in memory (in which case cacEbtState==ready and cacCurrentEbtId holds a non-zero value). The cacVersion may also revert to SCR-PCR if, during boot or an EBT load, a valid EBT cannot be established in memory. A change of state in cacVersion will result in recalculatation of EB Sums." DEFVAL { ebt } ::= { cacPerLinkEntry 14 } cacLinkEnable OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable cac? When cacEnable has the value * yes, then the three CAC service routines are operational as defined, * no, then all connections are accepted regardless of required bandwidths CAC may be enabled or disabled by the manager at any time that the cacLinkState is ready. Enabling CAC will cause recalculatation of EB sums for that link. Disabling CAC will cause the EB sums for the link (also for associated V-SAPs) to be set to zero." DEFVAL { yes } ::= { cacPerLinkEntry 15 } cacLinkSignalMode OBJECT-TYPE SYNTAX INTEGER { single-channel(1), multi-channel(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Link signalling mode cacSignallingMode is a read-only variable indicating whether the link is currently in the signalling mode: * single-channel or * multi-channel The value of cacSignallingMode is updated any time a virtual SAP is either associated or disassociated with a physical SAP. Multi-channel mode indicates that at least one virtual SAP is associated with the link's physical SAP. In multi-channel mode the zero-loss effective bandwidths are not used for connection admission control." DEFVAL { single-channel } ::= { cacPerLinkEntry 16 } cacLinkState OBJECT-TYPE SYNTAX INTEGER { uninitialized(1), configuring(2), recalculating(3), ready(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the Link The cacLinkState variable can take the values: * uninitialised is an initial MIB value which is never returned to without staring from a new MIB. * configuring indicates that the CAC on that link cannot be used at the current time. This indicates that CAC is booting, an EBT is being loaded. This is a transient state that will go to ready or recalculating. * recalculating indicates that the sums for both eb and scr-pcr are cleared and are recalculated for the existing connections. * ready indicates that CAC may be used on that link. The state machine is given in Figure 3. Transitions out of the ready state can be caused by a boot, an EBT load or the call back functions on (per link) Enable and Version. Whether the transition from configuring back to ready is direct or via recalculating depends on whether or not there is a need to recalculate the effective bandwidth sums; this depends on several factors that can be derived from the detailed design in Section 6.2.4.7. The value of the cacLinkState variable is valid and indicates the current link state of the CAC indepenently of the value of cacEnable, cacVersion and cacEbtState. When cacLinkState is configuring, certain CAC functions are disabled: * Requests to the allocate, deallocate and allocation_change service routines will be rejected without processing. * Requests to the allocation summary routine may produce inconsistent results. When cacLinkState is recalculating, certain CAC functions are disabled: * Requests to allocation_change and deallocate service routines will be rejected without processing. * Requests to the allocation summary routine may produce inconsistent results." DEFVAL { uninitialized } ::= { cacPerLinkEntry 17 } cacPerSapTable OBJECT-TYPE SYNTAX SEQUENCE OF CacPerSapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table containing per Sap data. The virtual SAP table in the MIB has 12 entries indexed by cacSapNo in the range (20..31). For each SAP there the table entries are detailed below. These entries are only used when at least one of the link's cacSignallingMode is multi-channel. The association of a virtual SAP to a link is given in the resource table MIB group." ::= { dv2Cac 7 } cacPerSapEntry OBJECT-TYPE SYNTAX CacPerSapEntry ACCESS not-accessible STATUS mandatory INDEX {cacSapNo} ::= { cacPerSapTable 1 } CacPerSapEntry ::= SEQUENCE { cacSapNo INTEGER, cacSapSumE1T Gauge, cacSapSumE2T Gauge, cacSapTotalBwScrPcr INTEGER, cacCurrentSapUsage INTEGER, cacMaxSapUsage INTEGER, cacSapReset INTEGER } cacSapNo OBJECT-TYPE SYNTAX INTEGER (20..31) ACCESS read-only STATUS mandatory DESCRIPTION "SAP number. cacSapNo is the index (0..11) to the array of sap data." ::= { cacPerSapEntry 1 } cacSapSumE1T OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Running sum of e1T. cacSumE1T tangent effective bandwidth for high priority queue These values are maintained only when the CAC is enabled on the link (cacEnable), when the SAP is assigned to a link and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero." ::= { cacPerSapEntry 2 } cacSapSumE2T OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Running sum of e2T. cacSumE1T tangent effective bandwidth for low priority queue These values are maintained only when the CAC is enabled on the link (cacEnable), when the SAP is assigned to a link and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero." ::= { cacPerSapEntry 3 } cacSapTotalBwScrPcr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total bw allocation on the link by scr-pcr CAC. cacTotalBwScrPcr is the total bandwidth allocated to extant connections when the CAC is enabled and when the SCR-PCR CAC is being used. Its value is zero if CAC is disabled or the EBT CAC mode is used." ::= { cacPerSapEntry 4 } cacCurrentSapUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current SAP bandwidth allocation It is the current indication of bandwidth allocation on a sap based on the formula using effective bandwidths." ::= { cacPerSapEntry 5 } cacMaxSapUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Max SAP b/w allocation since last reset or card boot. cacMaxSapUsage shows the maximum value that cacCurrentSapUsage has reached since cacMaxSapUsage was last reset." ::= { cacPerSapEntry 6 } cacSapReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reload maximum SAP usage from current allocation cacReset resets cacMaxSapUsage, after the reset cacMaxSapUsage shows the same value as cacCurrentSapUsage." DEFVAL { no } ::= {cacPerSapEntry 7 } --___________________________________________________________________________ -- Traps dv2Message TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage } DESCRIPTION "This is used to send an arbitary text string to the NMS." ::= 1 slotChanged TRAP-TYPE ENTERPRISE dv2 VARIABLES { slot0PhySlotNo, slot0PhyState } DESCRIPTION "This is sent when a slot changes state." ::= 2 linkChanged TRAP-TYPE ENTERPRISE dv2 VARIABLES { slot0PhySlotNo, slot0PhyLink0State, slot0PhyLink1State, slot0PhyLink2State, slot0PhyLink3State, slot0PhyLstChngLnkNum, slot0PhyLstChngPrevLnkStat } DESCRIPTION "This is sent when a link changes state." ::= 3 psuChanged TRAP-TYPE ENTERPRISE dv2 VARIABLES { slot0PsuIndex, slot0PsuFault } DESCRIPTION "This is sent when a power supply changes state." ::= 4 configChanged TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysConfigChanged, slotNumber } DESCRIPTION "This is sent when has changed." ::= 5 -- ds1RecYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS1 yellow alarm is received" -- ::= 6 -- ds1ClrYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS1 yellow alarm is cleared" -- ::= 7 -- ds1RecBlueAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS1 AIS (BLUE) alarm is received" -- ::= 8 -- ds1ClrBlueAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS1 AIS (BLUE) alarm is cleared" -- ::= 9 -- ds1RecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS1 Loss of Frame alarm is received" -- ::= 10 -- ds1ClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS1 Loss of Frame alarm is cleared" -- ::= 11 -- plcpRecYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP yellow alarm is received" -- ::= 12 -- plcpClrYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP yellow alarm is cleared" -- ::= 13 -- plcpRecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP Loss of frame alarm is received" -- ::= 14 -- plcpClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP Loss of frame alarm is cleared" -- ::= 15 -- ds3RecYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 yellow alarm is received" -- ::= 16 -- ds3ClrYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 yellow alarm is cleared" -- ::= 17 -- ds3RecBlueAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 AIS (BLUE) alarm is received" -- ::= 18 -- ds3ClrBlueAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 AIS (BLUE) alarm is cleared" -- ::= 19 -- ds3RecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a DS3 Loss of Frame alarm is received" -- ::= 20 -- ds3ClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 Loss of Frame alarm is cleared" -- ::= 21 reset040 TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber} DESCRIPTION "This is sent when a the master processor is reset by operator" ::= 22 badPassword TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber } DESCRIPTION "This is sent when a user enters a bad password" ::= 23 -- forcedReload TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber} -- DESCRIPTION -- "This is sent when the software on flash memory is decompressed and started" -- ::= 24 -- noUserFile TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber } -- DESCRIPTION -- "This is sent when a user doesn't exist in the users.cfg file" -- ::= 25 billingRecFail TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber} DESCRIPTION "Could not create billing record" ::= 26 -- add variable #10, #11 clockAlarm TRAP-TYPE ENTERPRISE dv2 VARIABLES { alarmStatus, sysLastTrapMessage, sysClkAlarmErr, pSlotNumber, pSysRefSelect, sSlotNumber, sSysRefSelect, inService } DESCRIPTION "Change in system clock alarm state: declare or clear minor/major alarms, describe error and location, includes primary/secondary clock locations and the active clock reference" ::= 27 spvcInit TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sPvcId, slotNumber } DESCRIPTION "Call successfully established" ::= 28 spvcFail TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sPvcId, slotNumber, sPvcCauseDiagCode} DESCRIPTION "Call attempt failed" ::= 29 spvcCallClr TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sPvcId, slotNumber } DESCRIPTION "Call cleared after established" ::= 30 spvcCallReset TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sPvcId, slotNumber } DESCRIPTION "Call reset after established" ::= 31 -- spvcDeleted TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, sPvcId, slotNumber } -- DESCRIPTION -- "SPVC deleted from configuration" -- ::= 32 spvcRetryExceeded TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sPvcId, slotNumber } DESCRIPTION "Call attempts exceeded retry limit" ::= 33 -- spvcCallAttempt TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, sPvcId, slotNumber } -- DESCRIPTION -- " SPVC TBD" -- ::= 34 -- e1-2C-AIS-SET TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent for an AIS alarm declared" -- ::= 35 -- e1-2C-AIS-CLR TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent for an AIS alarm cleared" -- ::= 36 -- e1-2C-LOF-SET TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent for a Loss of Frame alarm declared" -- ::= 37 -- e1-2C-LOF-CLR TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent for a Loss of Frame alarm cleared" -- ::= 38 -- e3RecFERF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 FERF is received" -- ::= 39 -- e3ClrFERF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 FERF is cleared" -- ::= 40 -- e3RecBlueAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 AIS (BLUE) alarm is received" -- ::= 41 -- e3ClrBlueAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 AIS (BLUE) alarm is cleared" -- ::= 42 -- e3RecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a E3 Loss of Frame alarm is received" -- ::= 43 -- e3ClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 Loss of Frame alarm is cleared" -- ::= 44 -- e3RecLOS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a E3 Loss of Signal alarm is received" -- ::= 45 -- e3ClrLOS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 Loss of Signal alarm is cleared" -- ::= 46 -- ds3V2RecYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 yellow alarm is received" -- ::= 47 -- ds3V2ClrYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 yellow alarm is cleared" -- ::= 48 -- plcpV2RecYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP yellow alarm is received" -- ::= 49 -- plcpV2ClrYelAlarm TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP yellow alarm is cleared" -- ::= 50 -- ds3V2RecLOS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a DS3 Loss of Signal alarm is received" -- ::= 51 -- ds3V2ClrLOS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 Loss of Signal alarm is cleared" -- ::= 52 -- ds3V2RecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a DS3 Loss of Frame alarm is received" -- ::= 53 -- ds3V2ClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a DS3 Loss of Frame alarm is cleared" -- ::= 54 -- ds3V2RecAIS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a DS3 AIS alarm is received" -- ::= 55 -- ds3V2ClrAIS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo} -- DESCRIPTION -- "This is sent when a DS3 AIS alarm is cleared" -- ::= 56 -- plcpV2RecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP Loss of frame alarm is received" -- ::= 57 -- plcpV2ClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a PLCP Loss of frame alarm is cleared" -- ::= 58 -- plppFEFrmrDif TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a Far End Device is using a different DS3 Frame Format." -- ::= 59 -- sdhRecLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Loss of Frame failure is declared" -- ::= 60 -- sdhClrLOF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Loss of Frame failure is cleared" -- ::= 61 -- sdhRecLOS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Loss of Signal failure is declared" -- ::= 62 -- sdhClrLOS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Loss of Signal failure is cleared" -- ::= 63 -- sdhRecLOP TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Loss of Pointer failure is declared" -- ::= 64 -- sdhClrLOP TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Loss of Pointer failure is cleared" -- ::= 65 -- sdhRecLineAIS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Line AIS failure is declared" -- ::= 66 -- sdhClrLineAIS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Line AIS failure is cleared" -- ::= 67 -- sdhRecPathAIS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Path AIS failure is declared" -- ::= 68 -- sdhClrPathAIS TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Path AIS failure is cleared" -- ::= 69 -- sdhRecLineFERF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Line FERF failure is declared" -- ::= 70 -- sdhClrLineFERF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Line FERF failure is cleared" -- ::= 71 -- sdhRecPathYel TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Path Yellow failure is declared" -- ::= 72 -- sdhClrPathYel TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Path Yellow failure is cleared" -- ::= 73 -- e3RecLCD TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 LCD is declared" -- ::= 74 -- e3ClrLCD TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E3 LCD is cleared" -- ::= 75 mainInServ TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slot0InUse } DESCRIPTION "This is sent when the Main Slot 0 Controller goes into service" ::= 76 standbyInServ TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slot0InUse } DESCRIPTION "This is sent when the Standby Slot 0 Controller goes into service" ::= 77 bill25pstfull TRAP-TYPE ENTERPRISE dv2 VARIABLES { billAvailable } DESCRIPTION "This is sent when billing table is 25% full." ::= 78 bill75pstfull TRAP-TYPE ENTERPRISE dv2 VARIABLES { billAvailable } DESCRIPTION "This is sent when billing table is 75% full." ::= 79 restart040 TRAP-TYPE ENTERPRISE dv2 VARIABLES {slotNumber} DESCRIPTION "This is sent when the master processor has been restarted by the 68302 processor." ::= 80 alcTxError TRAP-TYPE ENTERPRISE dv2 VARIABLES {slotNumber} DESCRIPTION "This is sent after master processor has been reset due to ALC-87 Transmitter Error." ::= 81 -- e1-2C-LOS-SET TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent for a Loss of Signal alarm declared" -- ::= 82 -- e1-2C-LOS-CLR TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a Loss of Signal alarm clears" -- ::= 83 -- sdhRecPLM TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage , slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Path Label Mismatch failure is declared" -- ::= 84 -- sdhClrPLM TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a SONET/SDH Path Label Mismatch failure is cleared" -- ::= 85 -- plppFEFrmrSam TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a Far End Device is using a different DS3 Frame Format." -- ::= 86 -- e1RecFERF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E1 FERF is received" -- ::= 87 -- e1ClrFERF TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "This is sent when a E1 FERF is cleared" -- ::= 88 -- lOCD-active TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Sent when a Loss Of Cell Delineation has occurred" -- ::= 89 -- lOCD-clear TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Sent when Cell Delineation has been gained" -- ::= 90 -- #10: Add variables lim-fault TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, limTypeStatus } DESCRIPTION "Configured LIM type does not match the LIM in slot" ::= 91 -- #10: Add variables lim-oper TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, limTypeStatus } DESCRIPTION "LIM operational" ::= 92 psuAbsent TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slot0PsuIndex } DESCRIPTION "PSU Absent detected" ::= 93 psuPresent TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slot0PsuIndex } DESCRIPTION "PSU Presence detected" ::= 94 switchFabricSwap TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage } DESCRIPTION "Switch Fabric Redundant Swap" ::= 95 -- exBERActive TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Excessive Bit Error Rate Active" -- ::= 96 -- exBERClear TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Excessive Bit Error Rate Clear" -- ::= 97 -- losAlrActive TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Loss Of Signal Alarm Active" -- ::= 98 -- losAlrClear TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Loss Of Signal Alarm Clear" -- ::= 99 -- lofAlrActive TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Loss Of Frame Alarm Active" -- ::= 100 -- lofAlrClear TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Loss Of Frame Alarm Clear" -- ::= 101 -- aisAlrActive TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "AIS Alarm Active" -- ::= 102 -- aisAlrClear TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "AIS Alarm Clear" -- ::= 103 -- yelAlrActive TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Yellow Alarm Active" -- ::= 104 -- yelAlrClear TRAP-TYPE -- ENTERPRISE dv2 -- VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } -- DESCRIPTION -- "Yellow Alarm Clear" -- ::= 105 internalReset TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber} DESCRIPTION "This is sent after the software has detected an internal error and restarted itself." ::= 106 aal1Fault TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } DESCRIPTION "This is sent when an AAL1 fault has occurred." ::= 107 aal1Clear TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } DESCRIPTION "This is sent when an AAL1 fault has been cleared." ::= 108 ds1LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 109 ds1LOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1LOFAlarm } DESCRIPTION "Loss of Frame alarm" ::= 110 ds1AIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1AISAlarm } DESCRIPTION "AIS alarm" ::= 111 ds1Yellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1YellowAlarm } DESCRIPTION "Yellow alarm" ::= 112 ds1ExBER TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1ExBERAlarm } DESCRIPTION "Excessive Bit Error Rate Alarm" ::= 113 ds1v2LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1V2LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 114 ds1v2LOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1V2LOFAlarm } DESCRIPTION "Loss of Frame alarm" ::= 115 ds1v2AIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1V2AISAlarm } DESCRIPTION "AIS alarm" ::= 116 ds1v2Yellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1V2FerfAlarm } DESCRIPTION "Yellow alarm" ::= 117 ds1v2ExBER TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds1V2BERAlarm } DESCRIPTION "Excessive Bit Error Rate Alarm" ::= 118 ds3LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds3LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 119 ds3V2LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, ds3V2LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 120 ds3LOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhDS3LOFAlarm } DESCRIPTION "Loss of Frame alarm" ::= 121 ds3AIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhDS3AISAlarm } DESCRIPTION "AIS alarm" ::= 122 ds3Yellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhDS3YellowAlarm } DESCRIPTION "Yellow alarm" ::= 123 ds3ExBER TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhDS3ExBERAlarm } DESCRIPTION "Excessive Bit Error Rate Alarm" ::= 124 ds3FEFrmrDif TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhDS3RxFrmFmt } DESCRIPTION "Received frame format is different than configured frame format" ::= 125 e1LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, e1LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 126 e1LOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, e1LOFAlarm } DESCRIPTION "Loss of Frame alarm" ::= 127 e1AIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, e1AISAlarm } DESCRIPTION "AIS alarm" ::= 128 e1Yellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, e1FerfAlarm } DESCRIPTION "Yellow alarm" ::= 129 e1ExBER TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, e1ExBERAlarm } DESCRIPTION "Excessive Bit Error Rate Alarm" ::= 130 e3LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, e3LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 131 e3LOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhE3LOFAlarm } DESCRIPTION "Loss of Frame alarm" ::= 132 e3AIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhE3AISAlarm } DESCRIPTION "AIS alarm" ::= 133 e3Yellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhE3FERFAlarm } DESCRIPTION "Yellow alarm" ::= 134 e3ExBER TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhE3ExBERAlarm } DESCRIPTION "Excessive Bit Error Rate Alarm" ::= 135 locd TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhPLCPLOCDAlarm } DESCRIPTION "Loss Of Cell Delineation" ::= 136 plcpYellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhPLCPYellowAlarm } DESCRIPTION "PLCP yellow alarm" ::= 137 plcpLOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, pdhPLCPLOFAlarm } DESCRIPTION "PLCP Loss of Frame alarm" ::= 138 sdhLOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmLOS } DESCRIPTION "SONET/SDH Loss of Signal" ::= 139 sdhLOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmLOF } DESCRIPTION "SONET/SDH Loss of Frame" ::= 140 sdhLineAIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmLineAIS } DESCRIPTION "SONET/SDH Line AIS failure" ::= 141 sdhPathAIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmPathAIS } DESCRIPTION "SONET/SDH Path AIS failure" ::= 142 sdhLOP TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmLOP } DESCRIPTION "SONET/SDH Loss of Pointer" ::= 143 sdhPLM TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmPLM } DESCRIPTION "SONET/SDH Path Label Mismatch" ::= 144 sdhLineYellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmLineRFI } DESCRIPTION "SONET/SDH Line FERF failure" ::= 145 sdhPathYellow TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSAlarmPathRFI } DESCRIPTION "SONET/SDH Path Yellow failure" ::= 146 sdhExBER TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, sdhSExBERAlarm } DESCRIPTION "SONET/SDH Excessive Bit Error Rate" ::= 147 clockActiveRef TRAP-TYPE ENTERPRISE dv2 VARIABLES {inService} DESCRIPTION "Current Active Reference" ::= 148 outOfResource TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo} DESCRIPTION "Link cell rate is not sufficient for established connections" ::= 149 hssiLOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, hssiLOSAlarm } DESCRIPTION "HSSI Loss of Signal" ::= 150 hssiDTEReady TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } DESCRIPTION "DTE is Ready" ::= 151 hssiDCEReady TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } DESCRIPTION "DCE is Ready" ::= 152 hssiDTENotReady TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } DESCRIPTION "DTE is not Ready" ::= 153 hssiDCENotReady TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo } DESCRIPTION "DCE is not Ready" ::= 154 userstatus1 TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, userInputStatus } DESCRIPTION "" ::= 155 userstatus2 TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, userInputStatus } DESCRIPTION "" ::= 156 pntmoper TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, pscatmode } DESCRIPTION "Sent when Primary NTM card operational status changes" ::= 157 sntmoper TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sscatmode } DESCRIPTION "Sent when Secondary NTM card operational status changes" ::= 158 pntmoscstatus TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, pcatstr3oscstatus } DESCRIPTION "Sent when Primary NTM card oscillator status changes" ::= 159 sntmoscstatus TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, scatstr3oscstatus } DESCRIPTION "Sent when secondary NTM card oscillator status changes" ::= 160 pbitslineok TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, pbslineok } DESCRIPTION "Sent when Primary NTM card BITS line status changes" ::= 161 sbitslineok TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, sbslineok } DESCRIPTION "Sent when secondary NTM card BITS line status changes" ::= 162 svcHalfConnect TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber, svcHalfConCnt } DESCRIPTION "SVC half connect detected" ::= 163 duplicateIpAddr TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, qeDocMacAddress} DESCRIPTION "Sent When a duplicate IP address is detected." ::= 164 svcQsaalReset TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber } DESCRIPTION "Sent when SAP is reset" ::= 165 svcQsaalUpDown TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber } DESCRIPTION "Sent when SAP transitions between Up and Down" ::= 166 svcT309Expiry TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber } DESCRIPTION "Sent when T309 timer expired and calls exist on a SAP" ::= 167 j2LOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, j2LOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 168 j2LOF TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, j2LOFAlarm } DESCRIPTION "Loss of Frame alarm" ::= 169 j2AIS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, j2AISAlarm } DESCRIPTION "AIS alarm" ::= 170 j2RAI TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, j2RAlmAlarm } DESCRIPTION "RAI alarm" ::= 171 scfLOS TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slotNumber, sysLkLinkNo, scfLOSAlarm } DESCRIPTION "Loss of Signal alarm" ::= 172 routeLoadFail TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber } DESCRIPTION "def.rtb file load failure" ::= 173 dTLLoadFail TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber } DESCRIPTION "dtl.bin file load failure" ::= 174 redunNotAvail TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slot0IsStandbySlot0 } DESCRIPTION "This is sent when the Redundant Slot 0 Controller is not available" ::= 175 redunAvail TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, slot0IsStandbySlot0 } DESCRIPTION "This is sent when the Redundant Slot 0 Controller is available" ::= 176 dQ7-error TRAP-TYPE ENTERPRISE dv2 VARIABLES { slotNumber } DESCRIPTION "This trap is sent when edos discovers a DQ7 error in flash" ::= 177 oamVcaRcvAIS-RDI TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, oamVcaVpi, oamVcaVci, oamVcaAisRdiState } DESCRIPTION "This trap is generated when an AIS or RDI is received on VCa port" ::= 178 oamVcbRcvAIS-RDI TRAP-TYPE ENTERPRISE dv2 VARIABLES { sysLastTrapMessage, oamVcbVpi, oamVcbVci, oamVcbAisRdiState } DESCRIPTION "This trap is generated when an AIS or RDI is received on VCb port" ::= 179 END