-- ***************************************************************************** -- Juniper-PPPOE-MIB -- -- Juniper Networks Enterprise MIB -- Point-to-Point Protocol over Ethernet (PPPoE) MIB -- -- Copyright (c) 1999 Redstone Communications, Inc. -- Copyright (c) 2000, 2002 Unisphere Networks, Inc. -- Copyright (c) 2002-2005 Juniper Networks, Inc. -- Copyright (c) 2008 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-PPPOE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB juniMibs FROM Juniper-MIBs JuniNextIfIndex, JuniEnable FROM Juniper-TC; juniPPPoEMIB MODULE-IDENTITY LAST-UPDATED "200811271023Z" -- 27-Nov-08 03:53 PM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper E-series product family. This MIB contains managed objects for each of two interface layers: PPPoE interfaces, and PPPoE subinterfaces. For each of these layers, management objects are provided to query for an available interface index, and to create/delete interfaces of that type. Creating/deleting these interface types using this MIB has the side effect of creating/deleting corresponding entries in the IF-MIB ifTable/ifXTable, and in the Juniper-UNI-IF-MIB.juniIfTable." -- Revision History REVISION "200811271023Z" -- 27-Nov-08 03:53 PM EST - JUNOSe 10.1 DESCRIPTION "Added juniPPPoEServiceNameTableUnknownAction object." REVISION "200806180942Z" -- 18-Jun-08 03:12 PM EST - JUNOSe 9.3 DESCRIPTION "Added juniPPPoEMaxSessionVsa object." REVISION "200508032058Z" -- 03-Aug-05 04:58 PM EDT - JUNOSe 7.2 DESCRIPTION "Added Interface Lockout configuration and state support." REVISION "200505181201Z" -- 18-May-05 12:01 PM EDT - JUNOSe 7.0.1 DESCRIPTION "Added MTU control object." REVISION "200406092058Z" -- 10-Mar-03 04:58 PM EDT - JUNOSe 7.0 DESCRIPTION "Added PADR Remote Circuit Id Capture support." REVISION "200303101830Z" -- 10-Mar-03 01:30 PM EST - JUNOSe 5.1 DESCRIPTION "Added separate PADI and PADR invalid session counters and obsoleted existing combined invalid session counter. Added invalid length and invalid tag length counters. Added ServiceName table support." REVISION "200210022012Z" -- 02-Oct-02 04:12 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200210011827Z" -- 01-Oct-02 02:27 PM EDT - JUNOSe 4.1 DESCRIPTION "Added PADN counter." REVISION "200208162146Z" -- 16-Aug-02 05:46 PM EDT - JUNOSe 4.0 DESCRIPTION "Added PADI flag support." REVISION "200106191427Z" -- 14-May-02 06:38 PM EST - JUNOSe 3.2 DESCRIPTION "Added AC-NAME and duplicate MAC address indicator objects." REVISION "200103211500Z" -- 21-Mar-01 10:00 AM EST - JUNOSe 3.0 DESCRIPTION "Deprecated profile support, which is now in a separate module. Made corrections to MOTM and URL ranges (should allow zero length) and to read-write objects that should be read-create because they are in tables that permit row creation. Fixed upper bound of juniPPPoEIfMaxNumSessions. Fixed conformance definitions." REVISION "200102120000Z" -- 12-Feb-01 - JUNOSe 2.6 DESCRIPTION "Added interface summary statistics under juniPPPoESummary node." REVISION "200010250000Z" -- 25-Oct-00 - JUNOSe 2.0 DESCRIPTION "Added profile support and new sub-interface objects." REVISION "9905130000Z" -- 13-May-99 - JUNOSe 1.1 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 18 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ JuniPPPoEServiceNameAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The set of Service-name action types. drop no PADO packet will be sent. terminate a PADO packet will be sent." SYNTAX INTEGER { drop(0), terminate(1) } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniPPPoEObjects OBJECT IDENTIFIER ::= { juniPPPoEMIB 1 } juniPPPoEIfLayer OBJECT IDENTIFIER ::= { juniPPPoEObjects 1 } juniPPPoESubIfLayer OBJECT IDENTIFIER ::= { juniPPPoEObjects 2 } juniPPPoEGlobal OBJECT IDENTIFIER ::= { juniPPPoEObjects 3 } juniPPPoEProfile OBJECT IDENTIFIER ::= { juniPPPoEObjects 4 } juniPPPoESummary OBJECT IDENTIFIER ::= { juniPPPoEObjects 5 } juniPPPoEServices OBJECT IDENTIFIER ::= { juniPPPoEObjects 6 } -- ///////////////////////////////////////////////////////////////////////////// -- -- PPPoE Interface Layer -- -- This layer is managed with the following elements: -- o NextIfIndex (generator for PPPoE IfIndex selection) -- o Interface Table (creation/configuration/deletion of PPPoE interfaces) -- o Statistics Table (PPPoE interface statistics) -- -- ///////////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new PPPoE interfaces -- juniPPPoENextIfIndex OBJECT-TYPE SYNTAX JuniNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { juniPPPoEIfLayer 1 } -- -- The PPPoE Interface Table -- juniPPPoEIfTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters for the PPPoE service on this interface." REFERENCE "RFC 2156 A method for transmitting PPP over Ethernet" ::= { juniPPPoEIfLayer 2 } juniPPPoEIfEntry OBJECT-TYPE SYNTAX JuniPPPoEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Parameters for a particular PPPoE interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable, and juniPPPoEIfStatsTable." INDEX { juniPPPoEIfIfIndex } ::= { juniPPPoEIfTable 1 } JuniPPPoEIfEntry ::= SEQUENCE { juniPPPoEIfIfIndex InterfaceIndex, juniPPPoEIfMaxNumSessions INTEGER, juniPPPoEIfRowStatus RowStatus, juniPPPoEIfLowerIfIndex InterfaceIndexOrZero, juniPPPoEIfAcName DisplayString, juniPPPoEIfDupProtect JuniEnable, juniPPPoEIfPADIFlag JuniEnable, juniPPPoEIfAutoconfig JuniEnable, juniPPPoEIfServiceNameTable Unsigned32, juniPPPoEIfPadrRemoteCircuitIdCapture JuniEnable, juniPPPoEIfMtu Integer32, juniPPPoEIfLockoutMin Integer32, juniPPPoEIfLockoutMax Integer32, juniPPPoEMaxSessionVsa INTEGER } juniPPPoEIfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { juniPPPoEIfEntry 1 } juniPPPoEIfMaxNumSessions OBJECT-TYPE SYNTAX INTEGER (0..65335) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of sessions allowed on the PPPoE interface, zero indicates unlimited." DEFVAL { 0 } ::= { juniPPPoEIfEntry 2 } juniPPPoEIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPPPoEIfRowStatus juniPPPoEIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniPPPoEIfIndex must have been determined previously, by reading juniPPPoENextIfIndex. The interface identified by juniPPPoEIfLowerIfIndex must exist, and must be an interface type that permits layering of PPPoE above it. A corresponding entry in ifTable/ifXTable/juniIfTable is created or destroyed as a result of creating or destroying an entry in this table." ::= { juniPPPoEIfEntry 3 } juniPPPoEIfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { juniPPPoEIfEntry 4 } juniPPPoEIfAcName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface." ::= { juniPPPoEIfEntry 5 } juniPPPoEIfDupProtect OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-create STATUS current DESCRIPTION "Flag to allow duplicate MAC addresses." DEFVAL { disable } ::= { juniPPPoEIfEntry 6 } juniPPPoEIfPADIFlag OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-create STATUS current DESCRIPTION "This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it." DEFVAL { disable } ::= { juniPPPoEIfEntry 7 } juniPPPoEIfAutoconfig OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-create STATUS current DESCRIPTION "This flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is created dynamically." DEFVAL { disable } ::= { juniPPPoEIfEntry 8 } juniPPPoEIfServiceNameTable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Associate a PPPoE Service Name Table with this interface for PADI processing." ::= { juniPPPoEIfEntry 9 } juniPPPoEIfPadrRemoteCircuitIdCapture OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-create STATUS current DESCRIPTION "This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag in the PADR packet." DEFVAL { disable } ::= { juniPPPoEIfEntry 10 } juniPPPoEIfMtu OBJECT-TYPE SYNTAX Integer32 (1|2|66..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The initial Maximum Transmit Unit (MTU) that the PPPoE major interface entity will advertise to the remote entity. If the value of this variable is 1 then the local PPPoE entity will use an MTU value determined by its underlying media interface. If the value of this variable is 2 then the local PPPoE entity will use a value determined by the PPPoE Max-Mtu-Tag transmitted from the client in the PADR packet. If no Max-Mtu-Tag is received, the value defaults to a maximum of 1494. The operational MTU is limited by the MTU of the underlying media interface minus the PPPoE frame overhead." DEFVAL { 1494 } ::= { juniPPPoEIfEntry 11 } juniPPPoEIfLockoutMin OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if juniPPPoEIfAutoconfig is set for this interface. The ability to lockout the client in the event of an error in creating a PPP interface is enabled by default. The initial lockout duration is this object's value and increases exponentially for each failure that occurs for the client creating a PPP interface for the PPPoE interface within the greater of 15 minutes and juniPPPoEIfLockoutMax. The lockout duration for the client will not exceed juniPPPoEIfLockoutMax. If the time between creation errors for the PPP interface for this interface is greater than the greater of 15 minutes and juniPPPoEIfLockoutMax, then the lockout duration reverts to this object's value. To disable the ability to lockout the client from recognition in the event of an error in creating a PPP interface for the specified interface, the value of this object and juniPPPoEIfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes or when this interface supports more than one session." DEFVAL { 0 } ::= { juniPPPoEIfEntry 12 } juniPPPoEIfLockoutMax OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if juniPPPoEIfAutoconfig is set for this interface. The ability to lockout the client from recognition in the event of an error in creating a PPP interface is enabled by default. The initial lockout duration is juniPPPoEIfLockoutMin and increases exponentially for each failure that occurs for the client interface within the greater of 15 minutes and this object's value. The lockout duration for the client will not exceed juniPPPoEIfLockoutMax. If the time between creation errors for the PPP interface for this interface is greater than the greater of 15 minutes and juniPPPoEIfLockoutMax, then the lockout duration reverts to juniPPPoEIfLockoutMin. To disable the ability to lockout the client from recognition in the event of an error in creating a PPP interface for the specified interface, the value of this object and juniPPPoEIfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes or when this interface supports more than one session." DEFVAL { 0 } ::= { juniPPPoEIfEntry 13 } juniPPPoEMaxSessionVsa OBJECT-TYPE SYNTAX INTEGER { override(1), ignore(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the action to be taken by PPPoE when RADIUS server returns the PPPoE max-session value: override Override the current PPPoE max-session value with the value returned by RADIUS server. Ignore Ignore the max-session value returned by RADIUS server" DEFVAL { ignore } ::= { juniPPPoEIfEntry 14 } -- -- The PPPoE Interface Statistics Table -- juniPPPoEIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoEIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics for the PPP over Ethernet Interface for the PPPoE service on this interface." ::= { juniPPPoEIfLayer 3 } juniPPPoEIfStatsEntry OBJECT-TYPE SYNTAX JuniPPPoEIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics for a particular PPPoE Interface." INDEX { juniPPPoEIfIfIndex } ::= { juniPPPoEIfStatsTable 1 } JuniPPPoEIfStatsEntry ::= SEQUENCE { juniPPPoEIfStatsRxPADI Counter32, juniPPPoEIfStatsTxPADO Counter32, juniPPPoEIfStatsRxPADR Counter32, juniPPPoEIfStatsTxPADS Counter32, juniPPPoEIfStatsRxPADT Counter32, juniPPPoEIfStatsTxPADT Counter32, juniPPPoEIfStatsRxInvVersion Counter32, juniPPPoEIfStatsRxInvCode Counter32, juniPPPoEIfStatsRxInvTags Counter32, juniPPPoEIfStatsRxInvSession Counter32, juniPPPoEIfStatsRxInvTypes Counter32, juniPPPoEIfStatsRxInvPackets Counter32, juniPPPoEIfStatsRxInsufficientResources Counter32, juniPPPoEIfStatsTxPADM Counter32, juniPPPoEIfStatsTxPADN Counter32, juniPPPoEIfStatsRxInvTagLength Counter32, juniPPPoEIfStatsRxInvLength Counter32, juniPPPoEIfStatsRxInvPadISession Counter32, juniPPPoEIfStatsRxInvPadRSession Counter32 } juniPPPoEIfStatsRxPADI OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADI packets received." ::= { juniPPPoEIfStatsEntry 1 } juniPPPoEIfStatsTxPADO OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADO packets transmitted." ::= { juniPPPoEIfStatsEntry 2 } juniPPPoEIfStatsRxPADR OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADR packets received." ::= { juniPPPoEIfStatsEntry 3 } juniPPPoEIfStatsTxPADS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADS packets transmitted." ::= { juniPPPoEIfStatsEntry 4 } juniPPPoEIfStatsRxPADT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADT packets received." ::= { juniPPPoEIfStatsEntry 5 } juniPPPoEIfStatsTxPADT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADT packets transmitted." ::= { juniPPPoEIfStatsEntry 6 } juniPPPoEIfStatsRxInvVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid version." ::= { juniPPPoEIfStatsEntry 7 } juniPPPoEIfStatsRxInvCode OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid code." ::= { juniPPPoEIfStatsEntry 8 } juniPPPoEIfStatsRxInvTags OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid tags." ::= { juniPPPoEIfStatsEntry 9 } juniPPPoEIfStatsRxInvSession OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of packets received with invalid session identifiers. This object became obsolete when separate counters were added for PADI and PADR packets." ::= { juniPPPoEIfStatsEntry 10 } juniPPPoEIfStatsRxInvTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid types." ::= { juniPPPoEIfStatsEntry 11 } juniPPPoEIfStatsRxInvPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of invalid packets received." ::= { juniPPPoEIfStatsEntry 12 } juniPPPoEIfStatsRxInsufficientResources OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of session requests that could not be honored due to invalid resources." ::= { juniPPPoEIfStatsEntry 13 } juniPPPoEIfStatsTxPADM OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADM packets transmitted." ::= { juniPPPoEIfStatsEntry 14 } juniPPPoEIfStatsTxPADN OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADN packets transmitted." ::= { juniPPPoEIfStatsEntry 15 } juniPPPoEIfStatsRxInvTagLength OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid tag length." ::= { juniPPPoEIfStatsEntry 16 } juniPPPoEIfStatsRxInvLength OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid length." ::= { juniPPPoEIfStatsEntry 17 } juniPPPoEIfStatsRxInvPadISession OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADI packets received with invalid session identifiers." ::= { juniPPPoEIfStatsEntry 18 } juniPPPoEIfStatsRxInvPadRSession OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADR packets received with invalid session identifiers." ::= { juniPPPoEIfStatsEntry 19 } -- -- The PPPoE Interface Client Lockout Table -- juniPPPoEIfLockoutTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoEIfLockoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The lockout configuration and state of a PPPoE client on this interface." ::= { juniPPPoEIfLayer 4 } juniPPPoEIfLockoutEntry OBJECT-TYPE SYNTAX JuniPPPoEIfLockoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the configuration and state of a particular PPPoE interface client lockout." INDEX { juniPPPoEIfIfIndex, juniPPPoEIfLockoutClientAddress } ::= { juniPPPoEIfLockoutTable 1 } JuniPPPoEIfLockoutEntry ::= SEQUENCE { juniPPPoEIfLockoutClientAddress MacAddress, juniPPPoEIfLockoutTime Integer32, juniPPPoEIfLockoutElapsedTime Integer32, juniPPPoEIfLockoutNextTime Integer32 } juniPPPoEIfLockoutClientAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source MAC address if the client." ::= { juniPPPoEIfLockoutEntry 1 } juniPPPoEIfLockoutTime OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "The time duration, in seconds, currently used to lockout the specified encapsulation type from recognition for the specified interface. The reported value is within the range specified by juniPPPoEIfLockoutMin and juniPPPoEIfLockoutMax. A value of 0 indicates that no lockout is occurring for the encapsulation type for the specified interface." ::= { juniPPPoEIfLockoutEntry 2 } juniPPPoEIfLockoutElapsedTime OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time, in seconds, that the specified encapsulation type has been locked-out from recognition for the specified interface. Its value will not exceed that of juniPPPoEIfLockoutTime. A value of 0 indicates that no lockout is occurring for the encapsulation type for the specified interface." ::= { juniPPPoEIfLockoutEntry 3 } juniPPPoEIfLockoutNextTime OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "The time duration, in seconds, that will be used to lockout the specified encapsulation type from recognition for the specified interface for the next event that results in a lockout condition. The reported value is within the range specified by juniPPPoEIfLockoutMin and juniPPPoEIfLockoutMax. When juniPPPoEIfEnable is set to enable, a value of 0 indicates that lockout is prevented from occurring for the encapsulation type for the specified interface (i.e., juniPPPoEIfLockoutMin and juniPPPoEIfLockoutMax are both set to 0)." ::= { juniPPPoEIfLockoutEntry 4 } -- ///////////////////////////////////////////////////////////////////////////// -- -- PPPoE Subinterface Layer -- -- This layer is managed with the following elements: -- o NextIfIndex (generator for PPPoE subinterface IfIndex selection) -- o SubIf Table (creation/configuration/deletion of PPPoE subinterfaces) -- -- ///////////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new PPPoE Subinterfaces -- juniPPPoESubIfNextIfIndex OBJECT-TYPE SYNTAX JuniNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { juniPPPoESubIfLayer 1 } -- -- The PPPoE Subinterface Table -- juniPPPoESubIfTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoESubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for PPPoE Subinterfaces present in the system." ::= { juniPPPoESubIfLayer 2 } juniPPPoESubIfEntry OBJECT-TYPE SYNTAX JuniPPPoESubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of a PPPoE Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/juniIfTable." INDEX { juniPPPoESubIfIndex } ::= { juniPPPoESubIfTable 1 } JuniPPPoESubIfEntry ::= SEQUENCE { juniPPPoESubIfIndex InterfaceIndex, juniPPPoESubIfRowStatus RowStatus, juniPPPoESubIfLowerIfIndex InterfaceIndexOrZero, juniPPPoESubIfId Integer32, juniPPPoESubIfSessionId Integer32, juniPPPoESubIfMotm DisplayString, juniPPPoESubIfUrl DisplayString } juniPPPoESubIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the PPPoE Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniPPPoESubNextIfIndex." ::= { juniPPPoESubIfEntry 1 } juniPPPoESubIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPPPoESubIfRowStatus juniPPPoESubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniPPPoESubIfIndex must have been determined previously, by reading juniPPPoESubIfNextIfIndex. The interface identified by juniPPPoESubIfLowerIfIndex must exist, and must be a PPPoE interface. A positive value configured for juniPPPoESubIfId must not already be assigned to another subinterface layered onto the same underlying PPPoE interface. A corresponding entry in ifTable/ifXTable/juniIfTable is created or destroyed as a result of creating or destroying an entry in this table." ::= { juniPPPoESubIfEntry 2 } juniPPPoESubIfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of a PPPoE interface over which this PPPoE Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { juniPPPoESubIfEntry 3 } juniPPPoESubIfId OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "An integer identifier for the PPPoE subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying PPPoE interface. If this object is not configured, or is configured with a value of -1, a nonzero value will be allocated internally and can be retrieved from this object after table entry creation has succeeded. A value of zero for this object is reserved for future use." DEFVAL { -1 } ::= { juniPPPoESubIfEntry 4 } juniPPPoESubIfSessionId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The current sessionId associated with this sub-interface." ::= { juniPPPoESubIfEntry 5 } juniPPPoESubIfMotm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "A message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message to the user." ::= { juniPPPoESubIfEntry 6 } juniPPPoESubIfUrl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "A URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web-page for the user." ::= { juniPPPoESubIfEntry 7 } -- ///////////////////////////////////////////////////////////////////////////// -- -- PPPoE Globals -- -- The globals are non interface based objects -- -- ///////////////////////////////////////////////////////////////////////////// juniPPPoEGlobalMotm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "A message to send via a PADM to all sub-interface that are currently in ifOperStatusUp state. A client may choose to display this information to the user. Retrieving this object always returns a null string." ::= { juniPPPoEGlobal 1 } -- ///////////////////////////////////////////////////////////////////////////// -- -- PPPoE Service-name tables -- -- The service-name tables are non interface based objects -- This layer is managed with the following elements: -- o NextIfIndex (generator for PPPoE Service-name table IfIndex selection) -- o Service-name table table (table if service-name tables) -- o Service-name table (service-name table entries) indexed by Service-name -- table ifIndex and service-name string value. -- -- ///////////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new PPPoE service-name tables -- -- ///////////////////////////////////////////////////////////////////////////// juniPPPoEServiceNameTableNextIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniPPPoEServiceNameTableTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated service-name table table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { juniPPPoEServices 1 } -- ///////////////////////////////////////////////////////////////////////////// -- -- Service-name table table -- -- ///////////////////////////////////////////////////////////////////////////// juniPPPoEServiceNameTableTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoEServiceNameTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for the PPPoE Service-name tables." ::= { juniPPPoEServices 2 } juniPPPoEServiceNameTableEntry OBJECT-TYPE SYNTAX JuniPPPoEServiceNameTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters for the PPPoE service-name table." INDEX { juniPPPoEServiceNameTableIndex } ::= { juniPPPoEServiceNameTableTable 1 } JuniPPPoEServiceNameTableEntry ::= SEQUENCE { juniPPPoEServiceNameTableIndex Unsigned32, juniPPPoEServiceNameTableName DisplayString, juniPPPoEServiceNameTableEmptyAction JuniPPPoEServiceNameAction, juniPPPoEServiceNameTableRowStatus RowStatus, juniPPPoEServiceNameTableUnknownAction JuniPPPoEServiceNameAction} juniPPPoEServiceNameTableIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value of the Service-name Table Entry." ::= { juniPPPoEServiceNameTableEntry 1 } juniPPPoEServiceNameTableName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Service-name table name." ::= { juniPPPoEServiceNameTableEntry 2 } juniPPPoEServiceNameTableEmptyAction OBJECT-TYPE SYNTAX JuniPPPoEServiceNameAction MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the behavior when the empty (zero length) Service-name tag is received in a PADI frame." ::= { juniPPPoEServiceNameTableEntry 3 } juniPPPoEServiceNameTableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPPPoEServiceNameTableRowStatus juniPPPoEServiceNameTableName Optionally, juniPPPoEServiceNameTableEmptyAction (default is terminate) or juniPPPoEServiceNameTableUnknownAction (default is drop) may be specified . In addition, when creating an entry the following conditions must hold: A value for juniPPPoEServiceNameTableIndex must have been determined previously, by reading juniPPPoEServiceNameTableNextIndex. A corresponding entry in juniServiceNameTable is created or destroyed as a result of creating or destroying an entry in this table." ::= { juniPPPoEServiceNameTableEntry 4 } juniPPPoEServiceNameTableUnknownAction OBJECT-TYPE SYNTAX JuniPPPoEServiceNameAction MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the behavior when the unknown (unconfigured) Service-name tag is received in a PADI frame." ::= { juniPPPoEServiceNameTableEntry 5 } juniPPPoEServiceNameTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoEServiceNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for the PPPoE Service-names." ::= { juniPPPoEServices 3 } juniPPPoEServiceNameEntry OBJECT-TYPE SYNTAX JuniPPPoEServiceNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters for the PPPoE service-name table entry." INDEX { juniPPPoEServiceNameTableIndex, juniPPPoEServiceName } ::= { juniPPPoEServiceNameTable 1 } JuniPPPoEServiceNameEntry ::= SEQUENCE { juniPPPoEServiceName DisplayString, juniPPPoEServiceNameAction JuniPPPoEServiceNameAction, juniPPPoEServiceNameRowStatus RowStatus } juniPPPoEServiceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Service-name tag value." ::= { juniPPPoEServiceNameEntry 1 } juniPPPoEServiceNameAction OBJECT-TYPE SYNTAX JuniPPPoEServiceNameAction MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the behavior when the Service-name tag is received in a PADI/PADR frame." ::= { juniPPPoEServiceNameEntry 2 } juniPPPoEServiceNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPPPoEServiceNameRowStatus The Service name is configured via the INDEX specified. A corresponding entry in juniServiceNameTable is created or destroyed as a result of creating or destroying an entry in this table." ::= { juniPPPoEServiceNameEntry 3 } -- ///////////////////////////////////////////////////////////////////////////// -- -- PPPoE Profile Support -- -- This table is to support setting of the PPPoE attributes in a -- profile entry -- -- Profiles are created in the juniProfileNameTable. Creation in -- that table provides an Id (unsigned32) used here for the index -- into the PPPoE portion of that table. -- -- ///////////////////////////////////////////////////////////////////////////// juniPPPoEProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPPPoEProfileEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table contains entries for the PPPoE portion of a profile entry." ::= { juniPPPoEProfile 1 } juniPPPoEProfileEntry OBJECT-TYPE SYNTAX JuniPPPoEProfileEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry describes the characteristics of the PPPoE components of a profile entry. Each entry is applied to an interface when the IP interface above the PPPoE sub-interface becomes active." INDEX { juniPPPoEProfileIndex } ::= { juniPPPoEProfileTable 1 } JuniPPPoEProfileEntry ::= SEQUENCE { juniPPPoEProfileIndex Unsigned32, juniPPPoEProfileRowStatus RowStatus, juniPPPoEProfileMotm DisplayString, juniPPPoEProfileUrl DisplayString } juniPPPoEProfileIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This is the index of the profile that the attributes are being set in. The index must exist before creating a row in this table. The index is equivalent to juniProfileIdId in the juniProfileIdTable." ::= { juniPPPoEProfileEntry 1 } juniPPPoEProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy The index must exist in the profile manager before this entry can be created. CreateAndGo simply adds a table entry to the PPPoE component. Destroy deletes the entry in the PPPoE component (but not the entry in other components), and removes all PPPoE information relating to this profile." ::= { juniPPPoEProfileEntry 2 } juniPPPoEProfileMotm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. A client may choose to display this message to the user." ::= { juniPPPoEProfileEntry 3 } juniPPPoEProfileUrl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user." ::= { juniPPPoEProfileEntry 4 } -- ///////////////////////////////////////////////////////////////////////////// -- -- PPP Interface Summary Counts -- -- ///////////////////////////////////////////////////////////////////////////// juniPPPoEMajorInterfaceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces configured and created in the system." ::= { juniPPPoESummary 1 } juniPPPoESummaryMajorIfAdminUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces in the system that are administratively configured to up(1)." REFERENCE "ifAdminStatus from IF-MIB" ::= { juniPPPoESummary 2 } juniPPPoESummaryMajorIfAdminDown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces in the system that are administrateively configued to down(2)." REFERENCE "ifAdminStatus from IF-MIB" ::= { juniPPPoESummary 3 } juniPPPoESummaryMajorIfOperUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces in the system with an operational state of up(1)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 4 } juniPPPoESummaryMajorIfOperDown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces in the system with an operational state of down(2)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 5 } juniPPPoESummaryMajorIfLowerLayerDown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces in the system with an operational state of lowerLayerDown(7)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 6 } juniPPPoESummaryMajorIfNotPresent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE major interfaces in the system with an operational state of notPresent(6)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 7 } juniPPPoESummarySubInterfaceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces configured in the system." ::= { juniPPPoESummary 8 } juniPPPoESummarySubIfAdminUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces in the system that are administratively configured to up(1)." REFERENCE "ifAdminStatus from IF-MIB" ::= { juniPPPoESummary 9 } juniPPPoESummarySubIfAdminDown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces in the system that are administrateively configued to down(2)." REFERENCE "ifAdminStatus from IF-MIB" ::= { juniPPPoESummary 10 } juniPPPoESummarySubIfOperUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces in the system with an operational state of up(1)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 11 } juniPPPoESummarySubIfOperDown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces in the system with an operational state of down(2)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 12 } juniPPPoESummarySubIfLowerLayerDown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces in the system with an operational state of lowerLayerDown(7)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 13 } juniPPPoESummarySubIfNotPresent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPPoE subinterfaces in the system with an operational state of notPresent(6)." REFERENCE "ifOperStatus from IF-MIB" ::= { juniPPPoESummary 14 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- juniPPPoETrapControl OBJECT IDENTIFIER ::= { juniPPPoEMIB 2 } -- juniPPPoETraps OBJECT IDENTIFIER ::= { juniPPPoEMIB 3 } -- juniPPPoETrapPrefix OBJECT IDENTIFIER ::= { juniPPPoETraps 0 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniPPPoEConformance OBJECT IDENTIFIER ::= { juniPPPoEMIB 4 } juniPPPoECompliances OBJECT IDENTIFIER ::= { juniPPPoEConformance 5 } juniPPPoEGroups OBJECT IDENTIFIER ::= { juniPPPoEConformance 4 } -- -- compliance statements -- juniPPPoECompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when profile support and new sub-interface objects were added." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup, juniPPPoESubIfGroup } ::= { juniPPPoECompliances 1 } -- JUNOSe 1.1 juniPPPoECompliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when interface summary statistics objects were added." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup2, juniPPPoESubIfGroup2, juniPPPoEProfileGroup } ::= { juniPPPoECompliances 2 } -- JUNOSe 2.0 juniPPPoECompliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when the profile objects were deprecated." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup2, juniPPPoESubIfGroup2, juniPPPoEProfileGroup, juniPPPoESummaryGroup } ::= { juniPPPoECompliances 3 } -- JUNOSe 2.6 juniPPPoECompliance4 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when new objects were added." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup2, juniPPPoESubIfGroup2, juniPPPoESummaryGroup } ::= { juniPPPoECompliances 4 } -- JUNOSe 3.0 juniPPPoECompliance5 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when PADI flag support was added." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup3, juniPPPoESubIfGroup2, juniPPPoESummaryGroup } ::= { juniPPPoECompliances 5 } -- JUNOSe 3.2 juniPPPoECompliance6 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when PADN counter support was added." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup4, juniPPPoESubIfGroup2, juniPPPoESummaryGroup } ::= { juniPPPoECompliances 6 } -- JUNOSe 4.0 juniPPPoECompliance7 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for service name table, invalid length and tag length counters, and the invalid session counter was replaced by separate PADI and PADR invalid session counters." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup5, juniPPPoESubIfGroup2, juniPPPoESummaryGroup } ::= { juniPPPoECompliances 7 } -- JUNOSe 4.1 juniPPPoECompliance8 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for remote circuit id capture." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup6, juniPPPoESubIfGroup2, juniPPPoESummaryGroup, juniPPPoEServiceNameTableGroup } ::= { juniPPPoECompliances 8 } -- JUNOSe 5.1 juniPPPoECompliance9 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for MTU configuration." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup7, juniPPPoESubIfGroup2, juniPPPoESummaryGroup, juniPPPoEServiceNameTableGroup } ::= { juniPPPoECompliances 9 } -- JUNOSe 7.0 juniPPPoECompliance10 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for lockout configuration." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup8, juniPPPoESubIfGroup2, juniPPPoESummaryGroup, juniPPPoEServiceNameTableGroup } ::= { juniPPPoECompliances 10 } -- JUNOSe 7.0.1 juniPPPoECompliance11 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for juniPPPoEMaxSessionVsa." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup9, juniPPPoESubIfGroup2, juniPPPoESummaryGroup, juniPPPoEServiceNameTableGroup, juniPPPoELockoutTableGroup } ::= { juniPPPoECompliances 11 } -- JUNOSe 7.2 juniPPPoECompliance12 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for juniPPPoEServiceNameTableUnknownAction" MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup10, juniPPPoESubIfGroup2, juniPPPoESummaryGroup, juniPPPoEServiceNameTableGroup, juniPPPoELockoutTableGroup } ::= { juniPPPoECompliances 12 } -- JUNOSe 9.3 juniPPPoECompliance13 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper PPPoE MIB." MODULE -- this module MANDATORY-GROUPS { juniPPPoEGroup10, juniPPPoESubIfGroup2, juniPPPoESummaryGroup, juniPPPoEServiceNameTableGroup1, juniPPPoELockoutTableGroup } ::= { juniPPPoECompliances 13 } -- JUNOSe 10.1 -- -- units of conformance -- juniPPPoEGroup OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvSession, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This statement became obsolete when new objects were added." ::= { juniPPPoEGroups 1 } juniPPPoESubIfGroup OBJECT-GROUP OBJECTS { juniPPPoESubIfNextIfIndex, juniPPPoESubIfRowStatus, juniPPPoESubIfLowerIfIndex, juniPPPoESubIfId, juniPPPoESubIfSessionId } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of PPPoE subinterfaces in a Juniper product. This statement became obsolete when new sub-interface objects were added." ::= { juniPPPoEGroups 2 } juniPPPoEProfileGroup OBJECT-GROUP OBJECTS { juniPPPoEProfileRowStatus, juniPPPoEProfileUrl, juniPPPoEProfileMotm } STATUS deprecated DESCRIPTION "A collection of objects providing management of PPPoE profile entries in a Juniper product. This group has been deprecated because the information is now supported in the Juniper-PPPOE-PROFILE-MIB." ::= { juniPPPoEGroups 3 } juniPPPoEGroup2 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvSession, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This statement became obsolete when new objects were added." ::= { juniPPPoEGroups 4 } juniPPPoESubIfGroup2 OBJECT-GROUP OBJECTS { juniPPPoESubIfNextIfIndex, juniPPPoESubIfRowStatus, juniPPPoESubIfLowerIfIndex, juniPPPoESubIfId, juniPPPoESubIfSessionId, juniPPPoESubIfUrl, juniPPPoESubIfMotm } STATUS current DESCRIPTION "A collection of objects providing management of PPPoE subinterfaces in a Juniper product." ::= { juniPPPoEGroups 5 } juniPPPoESummaryGroup OBJECT-GROUP OBJECTS { juniPPPoEMajorInterfaceCount, juniPPPoESummaryMajorIfAdminUp, juniPPPoESummaryMajorIfAdminDown, juniPPPoESummaryMajorIfOperUp, juniPPPoESummaryMajorIfOperDown, juniPPPoESummaryMajorIfNotPresent, juniPPPoESummaryMajorIfLowerLayerDown, juniPPPoESummarySubInterfaceCount, juniPPPoESummarySubIfAdminUp, juniPPPoESummarySubIfAdminDown, juniPPPoESummarySubIfOperUp, juniPPPoESummarySubIfOperDown, juniPPPoESummarySubIfNotPresent, juniPPPoESummarySubIfLowerLayerDown } STATUS current DESCRIPTION "A collection of objects providing collection of summary statistics on PPPoE interfaces." ::= { juniPPPoEGroups 6 } juniPPPoEGroup3 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvSession, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This group became obsolete when PADI flag support was added." ::= { juniPPPoEGroups 7 } juniPPPoEGroup4 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvSession, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This group became obsolete when PADN counter support was added." ::= { juniPPPoEGroups 8 } juniPPPoEGroup5 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvSession, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEIfStatsTxPADN, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This group became obsolete when support was added for invalid length and tag length counters and the invalid session counter was replaced by separate PADI and PADR invalid session counters." ::= { juniPPPoEGroups 9 } juniPPPoEGroup6 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfServiceNameTable, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvTagLength, juniPPPoEIfStatsRxInvLength, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEIfStatsTxPADN, juniPPPoEIfStatsRxInvPadISession, juniPPPoEIfStatsRxInvPadRSession, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "A collection of objects providing management of PPPoE interfaces in a Juniper product." ::= { juniPPPoEGroups 10 } juniPPPoEServiceNameTableGroup OBJECT-GROUP OBJECTS { juniPPPoEServiceNameTableNextIndex, juniPPPoEServiceNameTableName, juniPPPoEServiceNameTableEmptyAction, juniPPPoEServiceNameTableRowStatus, juniPPPoEServiceNameAction, juniPPPoEServiceNameRowStatus } STATUS obsolete DESCRIPTION "A collection of objects providing management of PPPoE service-name tables in a Juniper product. This group became obsolete when juniPPPoEServiceNameTableUnknownAction object is added" ::= { juniPPPoEGroups 11 } juniPPPoEGroup7 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfServiceNameTable, juniPPPoEIfPadrRemoteCircuitIdCapture, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvTagLength, juniPPPoEIfStatsRxInvLength, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEIfStatsTxPADN, juniPPPoEIfStatsRxInvPadISession, juniPPPoEIfStatsRxInvPadRSession, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "A collection of objects providing management of PPPoE interfaces in a Juniper product." ::= { juniPPPoEGroups 12 } juniPPPoEGroup8 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfServiceNameTable, juniPPPoEIfPadrRemoteCircuitIdCapture, juniPPPoEIfMtu, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvTagLength, juniPPPoEIfStatsRxInvLength, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEIfStatsTxPADN, juniPPPoEIfStatsRxInvPadISession, juniPPPoEIfStatsRxInvPadRSession, juniPPPoEGlobalMotm } STATUS current DESCRIPTION "A collection of objects providing management of PPPoE interfaces in a Juniper product." ::= { juniPPPoEGroups 13 } juniPPPoELockoutTableGroup OBJECT-GROUP OBJECTS { juniPPPoEIfLockoutTime, juniPPPoEIfLockoutElapsedTime, juniPPPoEIfLockoutNextTime } STATUS current DESCRIPTION "A collection of objects providing management of PPPoE lockout tables in a Juniper product." ::= { juniPPPoEGroups 14 } juniPPPoEGroup9 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfServiceNameTable, juniPPPoEIfPadrRemoteCircuitIdCapture, juniPPPoEIfMtu, juniPPPoEIfLockoutMin, juniPPPoEIfLockoutMax, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvTagLength, juniPPPoEIfStatsRxInvLength, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEIfStatsTxPADN, juniPPPoEIfStatsRxInvPadISession, juniPPPoEIfStatsRxInvPadRSession, juniPPPoEGlobalMotm } STATUS obsolete DESCRIPTION "A collection of objects providing management of PPPoE interfaces in a Juniper product." ::= { juniPPPoEGroups 15 } juniPPPoEGroup10 OBJECT-GROUP OBJECTS { juniPPPoENextIfIndex, juniPPPoEIfIfIndex, juniPPPoEIfMaxNumSessions, juniPPPoEIfRowStatus, juniPPPoEIfLowerIfIndex, juniPPPoEIfAcName, juniPPPoEIfDupProtect, juniPPPoEIfPADIFlag, juniPPPoEIfAutoconfig, juniPPPoEIfServiceNameTable, juniPPPoEIfPadrRemoteCircuitIdCapture, juniPPPoEIfMtu, juniPPPoEIfLockoutMin, juniPPPoEIfLockoutMax, juniPPPoEMaxSessionVsa, juniPPPoEIfStatsRxPADI, juniPPPoEIfStatsTxPADO, juniPPPoEIfStatsRxPADR, juniPPPoEIfStatsTxPADS, juniPPPoEIfStatsRxPADT, juniPPPoEIfStatsTxPADT, juniPPPoEIfStatsRxInvVersion, juniPPPoEIfStatsRxInvCode, juniPPPoEIfStatsRxInvTags, juniPPPoEIfStatsRxInvTagLength, juniPPPoEIfStatsRxInvLength, juniPPPoEIfStatsRxInvTypes, juniPPPoEIfStatsRxInvPackets, juniPPPoEIfStatsRxInsufficientResources, juniPPPoEIfStatsTxPADM, juniPPPoEIfStatsTxPADN, juniPPPoEIfStatsRxInvPadISession, juniPPPoEIfStatsRxInvPadRSession, juniPPPoEGlobalMotm } STATUS current DESCRIPTION "A collection of objects providing management of PPPoE interfaces in a Juniper product." ::= { juniPPPoEGroups 16 } -- JUNOSe 9.3 juniPPPoEServiceNameTableGroup1 OBJECT-GROUP OBJECTS { juniPPPoEServiceNameTableNextIndex, juniPPPoEServiceNameTableName, juniPPPoEServiceNameTableEmptyAction, juniPPPoEServiceNameTableRowStatus, juniPPPoEServiceNameAction, juniPPPoEServiceNameRowStatus, juniPPPoEServiceNameTableUnknownAction} STATUS current DESCRIPTION "A collection of objects providing management of PPPoE service-name tables in a Juniper product." ::= { juniPPPoEGroups 17 } -- JUNOSe 10.1 END