-- Copyright 1995 by 3Com Corporation. All rights reserved. -- MIB file name: linkb-mib -- available in these 3Com devices: LinkBuilder 3GH hubs -- For support or more info, check 3Com's web page at http://www.3com.com -- LinkBuilder 3GH Management Information Base (MIB) -- Version 1.0.7 -- April 12, 1994 -- 3Com Corporation -- 5400 Bayfront Plaza -- Santa Clara, CA 95052-8145 -- (408) 764-5000 -- Change History: -- 4/11/94 eah Removed lbBridgePortAddressLearnedEvent and -- lbBridgePortAddressForgottenEvent traps -- 4/ 7/94 eah Added lbBridgePortReceiveMulticastLimitExceededCount -- 6/30/93 eah Added lbSystemSmtProxyEvents -- 6/15/93 eah Added lbEthernetPortType -- 6/11/93 eah Added lbBridgeLocalIndex -- 5/29/93 eah Deprecated lbSlot express attributes. -- lbFddiMacReceiveMulticastThreshold, and -- lbEthernetPortReceiveMulticastThreshold -- Added lbSlotBridgeFunctionCount, -- lbSlotBridgeFunctionBaseIndex, -- lbSystemSmtProxyTimeoutBase -- 3/ 9/93 eah Added lbTrapEnterprise and lbTrapDest -- groups -- 3/ 3/93 eah Added enum for ESM to board type -- objects -- 2/18/93 eah Changed address threshold, address -- learned, and address forgotten events -- to use bridge attributes -- Created new groups lbBridge -- Deprecated lbExpress, -- lbExpressFddiPort, -- lbExpressEthernetPort, and -- lbExpressEthernetPortAddress groups -- Added lbSystemBridgeFunctionCount to -- the lbSystem group -- Deprecated lbSystemExpressFunctionCount, -- lbSystemExpressFddiPortCount, and -- lbSystemExpressEthernetPortCount -- 1/19/93 eah Replaced lbPowerSupplyFailureType by -- lbPowerSupplyLastFailure which is -- read-only and includes a none value -- lbPowerSupplyFailureType was deprecated -- Changed lbPowerSupplyFailureEvent to -- use new object -- Changed events to use new logical -- object oids -- 3/ 1/92 jp Added new groups using logical -- numbering scheme. Marked old groups -- as deprecated. -- 6/ 4/92 jp Added "lbFddiMacReceiveMulticastThreshold" -- and "lbEthernetPortReceiveMulticastThreshold" -- objects. -- 6/15/92 jp Added "lbFddiMacBeaconHistory" object. -------------------------------------------------------------------------------- LB3GH-1-0-7 DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, NetworkAddress FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9], and the TRAP-TYPE macro as defined in [10]. a3Com OBJECT IDENTIFIER ::= { enterprises 43 } lb3gh OBJECT IDENTIFIER ::= { a3Com 7 } -- This is the lb3ghMib MIB module. lb3ghMib OBJECT IDENTIFIER ::= { lb3gh 1 } chassis OBJECT IDENTIFIER ::= { lb3ghMib 1 } slot OBJECT IDENTIFIER ::= { lb3ghMib 2 } smm OBJECT IDENTIFIER ::= { lb3ghMib 3 } fbcm OBJECT IDENTIFIER ::= { lb3ghMib 4 } fcm OBJECT IDENTIFIER ::= { lb3ghMib 5 } port OBJECT IDENTIFIER ::= { lb3ghMib 6 } elm OBJECT IDENTIFIER ::= { lb3ghMib 7 } elmFddiMAC OBJECT IDENTIFIER ::= { lb3ghMib 8 } elmEthernetPort OBJECT IDENTIFIER ::= { lb3ghMib 9 } elmMACAddress OBJECT IDENTIFIER ::= { lb3ghMib 10 } -- The following are new groups defined in this revision -- of the lb3gh-mib. These groups contain all the functionality -- of the above named groups plus newly defined objects. lbSystem OBJECT IDENTIFIER ::= { lb3ghMib 11 } lbSlot OBJECT IDENTIFIER ::= { lb3ghMib 12 } lbFddiMac OBJECT IDENTIFIER ::= { lb3ghMib 13 } lbEthernetPort OBJECT IDENTIFIER ::= { lb3ghMib 14 } lbFddiPort OBJECT IDENTIFIER ::= { lb3ghMib 15 } lbExpress OBJECT IDENTIFIER ::= { lb3ghMib 16 } lbExpressFddiPort OBJECT IDENTIFIER ::= { lb3ghMib 17 } lbExpressEthernetPort OBJECT IDENTIFIER ::= { lb3ghMib 18 } lbExpressEthernetPortAddress OBJECT IDENTIFIER ::= { lb3ghMib 19 } lbPowerSupply OBJECT IDENTIFIER ::= { lb3ghMib 20 } -- New group for bridge support lbBridge OBJECT IDENTIFIER ::= { lb3ghMib 21 } -- New groups for controlling trap "filters" lbTrapEnterprise OBJECT IDENTIFIER ::= { lb3ghMib 22 } lbTrapDest OBJECT IDENTIFIER ::= { lb3ghMib 23 } -- The LinkBuilder 3GH Chassis Group -- The chassis group contains all objects used to manage the -- LinkBuilder 3GH chassis. -- Note that this group has been marked as deprecated and is -- included here for backward compatibilty. It will be removed -- from the next revision of the lb3gh MIB. The objects defined -- in this table are now available via the lbSystem group." chassisId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The unique identifier assigned to this station during manufacturing." ::= { chassis 1 } chassisType OBJECT-TYPE SYNTAX INTEGER { other(1), linkBuilder3GH(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of the LinkBuilder 3GH chassis." ::= { chassis 2 } chassisRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS deprecated DESCRIPTION "The revision number of this chassis." ::= { chassis 3 } chassisName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing this chassis." ::= { chassis 4 } chassisNameAbbrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing the generic name for this chassis." ::= { chassis 5 } chassisManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing the manufacturer of this chassis." ::= { chassis 6 } chassisSlotCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of slots in this chassis." ::= { chassis 7 } chassisBuildTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The build time of the LinkBuilder 3GH system software." ::= { chassis 8 } chassisSoftwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS deprecated DESCRIPTION "The revision number of the LinkBuilder 3GH system software." ::= { chassis 9 } chassisControlPanelColumns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of columns in the control panel display." ::= { chassis 10 } chassisControlPanelLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of lines in the control panel display." ::= { chassis 11 } chassisControlPanelText OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text currently displayed in the control panel display." ::= { chassis 12 } chassisAction OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: reset: resets the LinkBuilder 3GH system." ::= { chassis 13 } -- The lb3gh Slot Table slotTable OBJECT-TYPE SYNTAX SEQUENCE OF SlotEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of slot entries. A single instance of this object exists for each slot in the LinkBuilder 3GH chassis." ::= { slot 1 } slotEntry OBJECT-TYPE SYNTAX SlotEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A slot entry contains information common to a specified slot within a LinkBuilder 3GH system." INDEX { slotIndex } ::= { slotTable 1 } SlotEntry ::= SEQUENCE { slotIndex INTEGER, slotBoardType INTEGER, slotBoardRevision OCTET STRING, slotBoardStatus INTEGER, slotBoardName DisplayString, slotBoardNameAbbrev DisplayString, slotBoardAction INTEGER } slotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LinkBuilder 3GH chassis." ::= { slotEntry 1 } slotBoardType OBJECT-TYPE SYNTAX INTEGER { unknown(1), emptySlot(2), smm(3), fbcm(4), fcm(5), elm(6), esm(7), fcm2(8) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of board residing in this slot." ::= { slotEntry 2 } slotBoardRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS deprecated DESCRIPTION "The revision number of the board in this slot." ::= { slotEntry 3 } slotBoardStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), testing(2), offline(3), online(4) } ACCESS read-only STATUS deprecated DESCRIPTION "The status of the board in this slot." ::= { slotEntry 4 } slotBoardName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing this board type." ::= { slotEntry 5 } slotBoardNameAbbrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS deprecated DESCRIPTION "The abbreviation describing this board type." ::= { slotEntry 6 } slotBoardAction OBJECT-TYPE SYNTAX INTEGER { other(1), runDiagnostics(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: runDiagnostics: runs the board's offline diagnostics." ::= { slotEntry 7 } -- The lb3gh SMM Table smmTable OBJECT-TYPE SYNTAX SEQUENCE OF SMMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of System Management Module (SMM) entries. An entry exists for each Slot Table Entry whose board type is SMM. This table is indexed by the physical slot number of this SMM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table." ::= { smm 1 } smmEntry OBJECT-TYPE SYNTAX SMMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An SMM entry contains information common to a single System Management Module (SMM) within a LinkBuilder 3GH system." INDEX { smmSlotIndex } ::= { smmTable 1 } SMMEntry ::= SEQUENCE { smmSlotIndex INTEGER, smmEthernetPortCount INTEGER, smmBaseEthernetPortIndex INTEGER } smmSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LinkBuilder 3GH chassis." ::= { smmEntry 1 } smmEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet ports on this board." ::= { smmEntry 2 } smmBaseEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index for the first Ethernet port on this board." ::= { smmEntry 3 } -- The lb3gh FBCM Table fbcmTable OBJECT-TYPE SYNTAX SEQUENCE OF FBCMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of FDDI Backbone Connectivity Module (FBCM) entries. An entry exists for each Slot Table Entry whose board type is FBCM. This table is indexed by the physical slot number of this FBCM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table." ::= { fbcm 1 } fbcmEntry OBJECT-TYPE SYNTAX FBCMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An FBCM entry contains information common to a single FDDI Backbone Connectivity Module (FBCM) within a LinkBuilder 3GH system." INDEX { fbcmSlotIndex } ::= { fbcmTable 1 } FBCMEntry ::= SEQUENCE { fbcmSlotIndex INTEGER, fbcmMACCount INTEGER, fbcmBaseMACIndex INTEGER, fbcmPortCount INTEGER, fbcmBasePortIndex INTEGER } fbcmSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LinkBuilder 3GH chassis." ::= { fbcmEntry 1 } fbcmMACCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI MACs present on this board." ::= { fbcmEntry 2 } fbcmBaseMACIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI MAC on this board. Additional MACs on this board will have consecutively increasing MAC indices following this index." ::= { fbcmEntry 3 } fbcmPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI ports present on this board." ::= { fbcmEntry 4 } fbcmBasePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing port indices following this index." ::= { fbcmEntry 5 } -- The lb3gh FCM Table fcmTable OBJECT-TYPE SYNTAX SEQUENCE OF FCMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of FDDI Concentrator Module (FCM) entries. An entry exists for each Slot Table Entry whose board type is FCM. This table is indexed by the physical slot number of this FCM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table." ::= { fcm 1 } fcmEntry OBJECT-TYPE SYNTAX FCMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An FCM entry contains information common to a single FDDI Concentrator Module (FCM) within a LinkBuilder 3GH system." INDEX { fcmSlotIndex} ::= { fcmTable 1 } FCMEntry ::= SEQUENCE { fcmSlotIndex INTEGER, fcmPortCount INTEGER, fcmBasePortIndex INTEGER } fcmSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LinkBuilder 3GH chassis." ::= { fcmEntry 1 } fcmPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI ports present on this board." ::= { fcmEntry 2 } fcmBasePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing port indices following this index." ::= { fcmEntry 3 } -- The lb3gh Port Table portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of port entries. A single instance of this object exists for each port (excluding Ethernet ports) in the LinkBuilder 3GH system. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available either via the fddiPort group or the enetPort group." ::= { port 1 } portEntry OBJECT-TYPE SYNTAX PortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A port entry contains information common to a particular port located on a particular board within the LinkBuilder 3GH system." INDEX { portSlotIndex, portIndex} ::= { portTable 1 } PortEntry ::= SEQUENCE { portSlotIndex INTEGER, portIndex INTEGER, portLabel DisplayString } portSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LinkBuilder 3GH chassis." ::= { portEntry 1 } portIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the port on a particular slot." ::= { portEntry 2 } portLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS deprecated DESCRIPTION "An ASCII text string describing this port." ::= { portEntry 3 } -- The lb3gh ELM Table elmTable OBJECT-TYPE SYNTAX SEQUENCE OF ELMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Ethernet LAN Module (ELM) entries. An entry exists for each Slot Table Entry whose board type is ELM. This table is indexed by the physical slot number of this ELM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available either via the slot group or the express group." ::= { elm 1 } elmEntry OBJECT-TYPE SYNTAX ELMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An ELM entry contains information common to a single Ethernet LAN Module (ELM) within a LinkBuilder 3GH system." INDEX { elmSlotIndex } ::= { elmTable 1 } ELMEntry ::= SEQUENCE { elmSlotIndex INTEGER, elmFddiMACCount INTEGER, elmBaseFddiMACIndex INTEGER, elmEthernetPortCount INTEGER, elmBaseEthernetPortIndex INTEGER, elmAddressThreshold INTEGER } elmSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LinkBuilder 3GH chassis." ::= { elmEntry 1 } elmFddiMACCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI MACs present on this board." ::= { elmEntry 2 } elmBaseFddiMACIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI MAC on this board. Additional ports on this board will have consecutively increasing port indices following this index." ::= { elmEntry 3 } elmEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet ports present on this board." ::= { elmEntry 4 } elmBaseEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first Ethernet port on this board. Additional ports on this board will have consecutively increasing port indices following this index." ::= { elmEntry 5 } elmAddressThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "A reporting threshold for the total number of Ethernet addresses known for this board. When the threshold is reached, the event elmAddress- ThresholdEvent is generated." ::= { elmEntry 6 } -- The lb3gh ELM FDDI MAC Table elmFddiMACTable OBJECT-TYPE SYNTAX SEQUENCE OF ELMFddiMACEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of ELM FDDI MAC entries. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressFddiPort group." ::= { elmFddiMAC 1 } elmFddiMACEntry OBJECT-TYPE SYNTAX ELMFddiMACEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An ELM FDDI MAC entry contains information common to an FDDI MAC located on an ELM within a LinkBuilder 3GH system." INDEX { elmFddiSlotIndex, elmFddiMACIndex} ::= { elmFddiMACTable 1 } ELMFddiMACEntry ::= SEQUENCE { elmFddiSlotIndex INTEGER, elmFddiMACIndex INTEGER, elmFddiMACForwardedCts Counter, elmFddiMACDroppedCts Counter } elmFddiSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this board." ::= { elmFddiMACEntry 1 } elmFddiMACIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each FDDI MAC on this board." ::= { elmFddiMACEntry 2 } elmFddiMACForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames forwarded by a MAC from an Ethernet port to the FDDI network." ::= { elmFddiMACEntry 3 } elmFddiMACDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames that were dropped by a MAC due to local resource limitation or unknown destination MAC address." ::= { elmFddiMACEntry 4 } -- The lb3gh ELM Ethernet Port Table elmEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ELMEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of ELM Ethernet LAN port entries. The slot indices may not be consecutive. The MAC indices must be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressEthernetPort group." ::= { elmEthernetPort 1 } elmEthernetPortEntry OBJECT-TYPE SYNTAX ELMEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An ELM Ethernet LAN port entry contains information common to an Ethernet port located on an Ethernet LAN Module (ELM) within a LinkBuilder 3GH system." INDEX { elmEthernetPortSlotIndex, elmEthernetPortIndex } ::= { elmEthernetPortTable 1 } ELMEthernetPortEntry ::= SEQUENCE { elmEthernetPortSlotIndex INTEGER, elmEthernetPortIndex INTEGER, elmEthernetPortLabel DisplayString, elmEthernetPortForwardedCts Counter, elmEthernetPortDroppedCts Counter, elmEthernetPortUTurnCts Counter, elmEthernetPortState INTEGER, elmEthernetPortAction INTEGER } elmEthernetPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of the slot containing this port within the LinkBuilder 3GH chassis." ::= { elmEthernetPortEntry 1 } elmEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the port on a particular ELM board. This index ranges from 1 to elmEthernetPortCount." ::= { elmEthernetPortEntry 2 } elmEthernetPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS deprecated DESCRIPTION "An ASCII text string describing this Ethernet port." ::= { elmEthernetPortEntry 3 } elmEthernetPortForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames forwarded from this Ethernet port onto the FDDI network." ::= { elmEthernetPortEntry 4 } elmEthernetPortDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the numer of frames received on this port that were dropped because the destination MAC address was determined to be on the same Ethernet segment as the source MAC address." ::= { elmEthernetPortEntry 5 } elmEthernetPortUTurnCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames received on this Ethernet port and directed to another Ethernet port." ::= { elmEthernetPortEntry 6 } elmEthernetPortState OBJECT-TYPE SYNTAX INTEGER { onlineActive(1), onlineInactive(2), offline(3) } ACCESS read-write STATUS deprecated DESCRIPTION "The state of the Ethernet LAN port. This value can be set to enable or disable the Ethernet LAN port." ::= { elmEthernetPortEntry 7 } elmEthernetPortAction OBJECT-TYPE SYNTAX INTEGER { other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all a port's dynamic addresses to be flushed from the port's address list." ::= { elmEthernetPortEntry 8 } -- The lb3gh ELM Ethernet MAC Address Table elmEthernetMACAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF ELMEthernetMACAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of ELM Ethernet LAN Remote MAC Address entries. The slot indices may not be consecutive. The port indices must be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressEthernetPort group." ::= { elmMACAddress 1 } elmEthernetMACAddressEntry OBJECT-TYPE SYNTAX ELMEthernetMACAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A collection of information describing a remote Ethernet MAC detected to be attached to an Ethernet LAN port." INDEX { elmEthernetMACAddressSlotIndex, elmEthernetMACAddressPortIndex, elmEthernetMACAddressIndex} ::= { elmEthernetMACAddressTable 1 } ELMEthernetMACAddressEntry ::= SEQUENCE { elmEthernetMACAddressSlotIndex INTEGER, elmEthernetMACAddressPortIndex INTEGER, elmEthernetMACAddressIndex INTEGER, elmEthernetMACAddressType INTEGER, elmEthernetMACAddressRemoteAddress OCTET STRING, elmEthernetMACAddressIsStatic INTEGER, elmEthernetMACAddressStaticPort INTEGER, elmEthernetMACAddressAge INTEGER } elmEthernetMACAddressSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The physical slot number of the slot containing this ELM within the within th LinkBuilder 3GH chassis." ::= { elmEthernetMACAddressEntry 1 } elmEthernetMACAddressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The port index of this address entry within the table. This index ranges from 1 to elmEthernetPortCount." ::= { elmEthernetMACAddressEntry 2 } elmEthernetMACAddressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The index of this address entry within the table." ::= { elmEthernetMACAddressEntry 3 } elmEthernetMACAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). Setting this object to invalid (2) removes the corresponding address entry from the table." ::= { elmEthernetMACAddressEntry 4 } elmEthernetMACAddressRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS deprecated DESCRIPTION "The remote MAC address detected on this Ethernet LAN port." ::= { elmEthernetMACAddressEntry 5 } elmEthernetMACAddressIsStatic OBJECT-TYPE SYNTAX INTEGER { isStatic(1), isDynamic(2) } ACCESS read-write STATUS deprecated DESCRIPTION "A value indicating whether this MAC address was statically configured or dynamically learned on this port." ::= { elmEthernetMACAddressEntry 6 } elmEthernetMACAddressStaticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "If the object elmEthernetMACAddress- IsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured." ::= { elmEthernetMACAddressEntry 7 } elmEthernetMACAddressAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "This object indicates the time elapsed since this MAC address was added to this port's address table." ::= { elmEthernetMACAddressEntry 8 } -- XXX NEW GROUPS -- The lb3gh system Group lbSystemId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier assigned to this system during manufacturing." ::= { lbSystem 1 } lbSystemType OBJECT-TYPE SYNTAX INTEGER { other(1), tweleveSlot(2), fourSlot(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the LinkBuilder system." ::= { lbSystem 2 } lbSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing this system." ::= { lbSystem 3 } lbSystemManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing the manufacturer of this system." ::= { lbSystem 4 } lbSystemBackplaneRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework level." ::= { lbSystem 5 } lbSystemSlotCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of slots in the system." ::= { lbSystem 6 } lbSystemMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of memory (RAM), in bytes, present on the system processor board." ::= { lbSystem 7 } lbSystemFlashMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of flash memory, in bytes, present on the system processor board." ::= { lbSystem 8 } lbSystemNvMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of non-volatile memory, in bytes, present on the system processor board." ::= { lbSystem 9 } lbSystemSoftwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision number of the LinkBuilder system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier." ::= { lbSystem 10 } lbSystemBuildTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The build time of the system software." ::= { lbSystem 11 } lbSystemControlPanelHardwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "An 8-bit value specifying the revision level of the control panel hardware." ::= { lbSystem 12 } lbSystemControlPanelSoftwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "An 8-bit value specifying the revision level of the control panel software." ::= { lbSystem 13 } lbSystemControlPanelLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of lines in the control panel display." ::= { lbSystem 14 } lbSystemControlPanelColumns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of columns in the control panel display." ::= { lbSystem 15 } lbSystemControlPanelText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The currently displayed text in the control panel display." ::= { lbSystem 16 } lbSystemFddiMacCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI MAC's present in the system." ::= { lbSystem 17 } lbSystemFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI ports present in the system." ::= { lbSystem 18 } lbSystemEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ethernet ports present in the system." ::= { lbSystem 19 } lbSystemExpressFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards present in the system." ::= { lbSystem 20 } lbSystemExpressFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet Express FDDI ports present in the system." ::= { lbSystem 21 } lbSystemExpressEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet Express ethernet ports present in the system." ::= { lbSystem 22 } lbSystemPowerSupplyCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of power supply units present in the system." ::= { lbSystem 23 } lbSystemAction OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LinkBuilder system." ::= { lbSystem 24 } lbSystemBridgeFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switching modules in the system." ::= { lbSystem 25 } lbSystemSmtProxyTimeoutBase OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt three retries before determining that the proxied station is not answering, with the timeout doubling for each retry, the total time for a request to time out is equal to seven times the base timeout value." ::= { lbSystem 26 } lbSystemSmtProxyEvents OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1)." ::= { lbSystem 27 } -- The lb3gh Slot Table lbSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF LbSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of slot entries. A single instance of this object exists for each slot in the LinkBuilder system." ::= { lbSlot 1 } lbSlotEntry OBJECT-TYPE SYNTAX LbSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A slot entry contains information common to a given slot within a LinkBuilder system." INDEX { lbSlotIndex } ::= { lbSlotTable 1 } LbSlotEntry ::= SEQUENCE { lbSlotIndex INTEGER, lbSlotBoardType INTEGER, lbSlotBoardRevision OCTET STRING, lbSlotBoardStatus INTEGER, lbSlotBoardName DisplayString, lbSlotBoardNameAbbrev DisplayString, lbSlotFddiMacCount INTEGER, lbSlotFddiMacBaseIndex INTEGER, lbSlotFddiPortCount INTEGER, lbSlotFddiPortBaseIndex INTEGER, lbSlotEthernetPortCount INTEGER, lbSlotEthernetPortBaseIndex INTEGER, lbSlotExpressFunctionCount INTEGER, lbSlotExpressFunctionBaseIndex INTEGER, lbSlotExpressFddiPortCount INTEGER, lbSlotExpressFddiPortBaseIndex INTEGER, lbSlotExpressEthernetPortCount INTEGER, lbSlotExpressEthernetPortBaseIndex INTEGER, lbSlotBoardAction INTEGER, lbSlotBridgeFunctionCount INTEGER, lbSlotBridgeFunctionBaseIndex INTEGER } lbSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical slot number of this slot within the system." ::= { lbSlotEntry 1 } lbSlotBoardType OBJECT-TYPE SYNTAX INTEGER { unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), elm(6), esm(7), fcm2(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of board residing in this slot." ::= { lbSlotEntry 2 } lbSlotBoardRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision number of the board in this slot." ::= { lbSlotEntry 3 } lbSlotBoardStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), testing(2), offline(3), online(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the board in this slot." ::= { lbSlotEntry 4 } lbSlotBoardName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing this board." ::= { lbSlotEntry 5 } lbSlotBoardNameAbbrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The abbreviation used to describe this board." ::= { lbSlotEntry 6 } lbSlotFddiMacCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI MAC's present in this slot." ::= { lbSlotEntry 7 } lbSlotFddiMacBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first FDDI MAC in this slot." ::= { lbSlotEntry 8 } lbSlotFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI ports present in this slot." ::= { lbSlotEntry 9 } lbSlotFddiPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first FDDI port in this slot." ::= { lbSlotEntry 10 } lbSlotEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ethernet ports present in this slot." ::= { lbSlotEntry 11 } lbSlotEthernetPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first ethernet port in this slot." ::= { lbSlotEntry 12 } lbSlotExpressFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Express functions present in this slot." ::= { lbSlotEntry 13 } lbSlotExpressFunctionBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the first Express function in this slot." ::= { lbSlotEntry 14 } lbSlotExpressFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Express FDDI ports present in this slot." ::= { lbSlotEntry 15 } lbSlotExpressFddiPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the first Express FDDI port in this slot." ::= { lbSlotEntry 16 } lbSlotExpressEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Express ethernet ports present in this slot." ::= { lbSlotEntry 17 } lbSlotExpressEthernetPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the first Express ethernet port in this slot." ::= { lbSlotEntry 18 } lbSlotBoardAction OBJECT-TYPE SYNTAX INTEGER { other(1), runDiagnostics(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics." ::= { lbSlotEntry 19 } lbSlotBridgeFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of bridge functions present in this slot." ::= { lbSlotEntry 20 } lbSlotBridgeFunctionBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first bridge function in this slot." ::= { lbSlotEntry 21 } -- FDDI MAC group lbFddiMacTable OBJECT-TYPE SYNTAX SEQUENCE OF LbFddiMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of FDDI MAC entries. A single instance of this object exists for each FDDI MAC present in the system." ::= { lbFddiMac 1 } lbFddiMacEntry OBJECT-TYPE SYNTAX LbFddiMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An FDDI MAC entry contains information common to a particular FDDI MAC within the system." INDEX { lbFddiMacIndex } ::= { lbFddiMacTable 1 } LbFddiMacEntry ::= SEQUENCE { lbFddiMacIndex INTEGER, lbFddiMacSlotIndex INTEGER, lbFddiMacLocalIndex INTEGER, lbFddiMacByteReceiveRate INTEGER, lbFddiMacPeakByteReceiveRate INTEGER, lbFddiMacFrameReceiveRate INTEGER, lbFddiMacPeakFrameReceiveRate INTEGER, lbFddiMacByteTransmitRate INTEGER, lbFddiMacPeakByteTransmitRate INTEGER, lbFddiMacFrameTransmitRate INTEGER, lbFddiMacPeakFrameTransmitRate INTEGER, lbFddiMacReceiveMulticastThreshold INTEGER, lbFddiMacBeaconHistory OCTET STRING } lbFddiMacIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each FDDI MAC in the system. The MAC identified by a particular value of this index is the same MAC as identified by the same value of ifIndex." ::= { lbFddiMacEntry 1 } lbFddiMacSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this MAC." ::= { lbFddiMacEntry 2 } lbFddiMacLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this MAC relative to the slot on which it is physically present." ::= { lbFddiMacEntry 3 } lbFddiMacByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes received per second by this MAC during the most recent sampling period." ::= { lbFddiMacEntry 4 } lbFddiMacPeakByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbFddiMacByteReceiveRate for this MAC since the system was last initialized." ::= { lbFddiMacEntry 5 } lbFddiMacFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames received per second by this MAC during the most recent sampling period." ::= { lbFddiMacEntry 6 } lbFddiMacPeakFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbFddiMacFrameReceiveRate for this MAC since the system was last initialized." ::= { lbFddiMacEntry 7 } lbFddiMacByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes transmitted per second by this MAC during the most recent sampling period." ::= { lbFddiMacEntry 8 } lbFddiMacPeakByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbFddiMacByteTransmitRate for this MAC since the system was last initialized." ::= { lbFddiMacEntry 9 } lbFddiMacFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames transmitted per second by this MAC during the most recent sampling period." ::= { lbFddiMacEntry 10 } lbFddiMacPeakFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbFddiMacFrameTransmitRate for this MAC since the system was last initialized." ::= { lbFddiMacEntry 11 } lbFddiMacReceiveMulticastThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate." ::= { lbFddiMacEntry 12 } lbFddiMacBeaconHistory OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "This object gives a history of the most recent beacon information received on this MAC. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes." ::= { lbFddiMacEntry 13 } -- Ethernet Port group lbEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LbEthernetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ethernet port entries. A single instance of this object exists for each ethernet port present in the system." ::= { lbEthernetPort 1 } lbEthernetPortEntry OBJECT-TYPE SYNTAX LbEthernetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ethernet port entry contains information common to a particular ethernet port within the system." INDEX { lbEthernetPortIndex } ::= { lbEthernetPortTable 1 } LbEthernetPortEntry ::= SEQUENCE { lbEthernetPortIndex INTEGER, lbEthernetPortSlotIndex INTEGER, lbEthernetPortLocalIndex INTEGER, lbEthernetPortLabel DisplayString, lbEthernetPortChipsetType INTEGER, lbEthernetPortLinkStatus INTEGER, lbEthernetPortByteReceiveRate INTEGER, lbEthernetPortPeakByteReceiveRate INTEGER, lbEthernetPortFrameReceiveRate INTEGER, lbEthernetPortPeakFrameReceiveRate INTEGER, lbEthernetPortByteTransmitRate INTEGER, lbEthernetPortPeakByteTransmitRate INTEGER, lbEthernetPortFrameTransmitRate INTEGER, lbEthernetPortPeakFrameTransmitRate INTEGER, lbEthernetPortReceiveMulticastThreshold INTEGER, lbEthernetPortType INTEGER } lbEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each ethernet port in the system. The port identified by a particular value of this index is the same port as identified by the same value of ifIndex." ::= { lbEthernetPortEntry 1 } lbEthernetPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lbEthernetPortEntry 2 } lbEthernetPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lbEthernetPortEntry 3 } lbEthernetPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII text string describing this port." ::= { lbEthernetPortEntry 4 } lbEthernetPortChipsetType OBJECT-TYPE SYNTAX INTEGER { other(1), chipsetAMD79900(2), chipsetIntel82586(3), chipsetIntel82596(4), chipsetSEEQ8003(5), chipsetNational8390(6), chipsetNationalSonic(7), chipsetFujitsu86950(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of chipset used to implement this port." ::= { lbEthernetPortEntry 5 } lbEthernetPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inActive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the link status for this port." ::= { lbEthernetPortEntry 6 } lbEthernetPortByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes received per second by this port during the most recent sampling period." ::= { lbEthernetPortEntry 7 } lbEthernetPortPeakByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbEthernetPortByteReceiveRate for this port since the system was last initialized." ::= { lbEthernetPortEntry 8 } lbEthernetPortFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames received per second by this port during the most recent sampling period." ::= { lbEthernetPortEntry 9 } lbEthernetPortPeakFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbEthernetPortFrameReceiveRate for this port since the system was last initialized." ::= { lbEthernetPortEntry 10 } lbEthernetPortByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes transmitted per second by this port during the most recent sampling period." ::= { lbEthernetPortEntry 11 } lbEthernetPortPeakByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbEthernetPortByteTransmitRate for this port since the system was last initialized." ::= { lbEthernetPortEntry 12 } lbEthernetPortFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames transmitted per second by this port during the most recent sampling period." ::= { lbEthernetPortEntry 13 } lbEthernetPortPeakFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lbEthernetPortFrameTransmitRate for this port since the system was last initialized." ::= { lbEthernetPortEntry 14 } lbEthernetPortReceiveMulticastThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate." ::= { lbEthernetPortEntry 15 } lbEthernetPortType OBJECT-TYPE SYNTAX INTEGER { telco10BaseT(1), rj4510BaseT(2), foirl(3), aui(4), other(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Specific description of this port's type." ::= { lbEthernetPortEntry 16 } -- FDDI port group lbFddiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LbFddiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of FDDI port entries. A single instance of this object exists for each FDDI port in the system." ::= { lbFddiPort 1 } lbFddiPortEntry OBJECT-TYPE SYNTAX LbFddiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Port entry contains information common to a particular FDDI port in the system." INDEX { lbFddiPortIndex } ::= { lbFddiPortTable 1 } LbFddiPortEntry ::= SEQUENCE { lbFddiPortIndex INTEGER, lbFddiPortSlotIndex INTEGER, lbFddiPortLocalIndex INTEGER, lbFddiPortLabel DisplayString } lbFddiPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each FDDI port in the system. It's value ranges between 1 and the value of lbSystemFddiPortCount." ::= { lbFddiPortEntry 1 } lbFddiPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lbFddiPortEntry 2 } lbFddiPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lbFddiPortEntry 3 } lbFddiPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII text string describing this port." ::= { lbFddiPortEntry 4 } -- Express Function group lbExpressTable OBJECT-TYPE SYNTAX SEQUENCE OF LbExpressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express function entries." ::= { lbExpress 1 } lbExpressEntry OBJECT-TYPE SYNTAX LbExpressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An Express entry contains information common to a particular Express function in a given system." INDEX { lbExpressIndex } ::= { lbExpressTable 1 } LbExpressEntry ::= SEQUENCE { lbExpressIndex INTEGER, lbExpressSlotIndex INTEGER, lbExpressLocalIndex INTEGER, lbExpressAddressThreshold INTEGER } lbExpressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each Express function in the system. It's value ranges between 1 and the value of lbSystemExpressFunctionCount." ::= { lbExpressEntry 1 } lbExpressSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this function." ::= { lbExpressEntry 2 } lbExpressLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of this function relative to the slot on which it is physically present." ::= { lbExpressEntry 3 } lbExpressAddressThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached, the event lbEemAddressThresholdEvent is generated." ::= { lbExpressEntry 4 } -- Express FDDI Port group lbExpressFddiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LbExpressFddiPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express FDDI port entries." ::= { lbExpressFddiPort 1 } lbExpressFddiPortEntry OBJECT-TYPE SYNTAX LbExpressFddiPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A Port entry contains information for a particular Express FDDI port in a given system." INDEX { lbExpressFddiPortIndex } ::= { lbExpressFddiPortTable 1 } LbExpressFddiPortEntry ::= SEQUENCE { lbExpressFddiPortIndex INTEGER, lbExpressFddiPortSlotIndex INTEGER, lbExpressFddiPortLocalIndex INTEGER, lbExpressFddiPortForwardedCts Counter, lbExpressFddiPortDroppedCts Counter } lbExpressFddiPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each Express port in the system. It's value ranges between 1 and the value of lbSystemExpressFddiPortCount." ::= { lbExpressFddiPortEntry 1 } lbExpressFddiPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lbExpressFddiPortEntry 2 } lbExpressFddiPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lbExpressFddiPortEntry 3 } lbExpressFddiPortForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames forwarded by this MAC from an ethernet port to the FDDI network." ::= { lbExpressFddiPortEntry 4 } lbExpressFddiPortDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames received by this MAC that were not forwarded." ::= { lbExpressFddiPortEntry 5 } -- Express Ethernet Port group lbExpressEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LbExpressEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express ethernet port entries." ::= { lbExpressEthernetPort 1 } lbExpressEthernetPortEntry OBJECT-TYPE SYNTAX LbExpressEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An Expres ethernet port entry contains information common to a particular Express ethernet port located in the system." INDEX { lbExpressEthernetPortIndex } ::= { lbExpressEthernetPortTable 1 } LbExpressEthernetPortEntry ::= SEQUENCE { lbExpressEthernetPortIndex INTEGER, lbExpressEthernetPortSlotIndex INTEGER, lbExpressEthernetPortLocalIndex INTEGER, lbExpressEthernetPortForwardedCts Counter, lbExpressEthernetPortDroppedCts Counter, lbExpressEthernetPortUTurnCts Counter, lbExpressEthernetPortAction INTEGER } lbExpressEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lbSystemExpressEthernetPortCount." ::= { lbExpressEthernetPortEntry 1 } lbExpressEthernetPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lbExpressEthernetPortEntry 2 } lbExpressEthernetPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lbExpressEthernetPortEntry 3 } lbExpressEthernetPortForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames forwarded from this ethernet port to the FDDI network." ::= { lbExpressEthernetPortEntry 4 } lbExpressEthernetPortDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames received by this ethernet port that were not forwarded or u-turned." ::= { lbExpressEthernetPortEntry 5 } lbExpressEthernetPortUTurnCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames received by this ethernet port that were directed to another ethernet port." ::= { lbExpressEthernetPortEntry 6 } lbExpressEthernetPortAction OBJECT-TYPE SYNTAX INTEGER { other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list." ::= { lbExpressEthernetPortEntry 7 } -- Express Ethernet port Address Table lbExpressEthernetPortAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF LbExpressEthernetPortAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express Remote MAC Address entries." ::= { lbExpressEthernetPortAddress 1 } lbExpressEthernetPortAddressEntry OBJECT-TYPE SYNTAX LbExpressEthernetPortAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry contains information describing a remote Ethernet MAC detected to be attached to an Express port." INDEX { lbExpressEthernetPortAddressPortIndex, lbExpressEthernetPortAddressIndex } ::= { lbExpressEthernetPortAddressTable 1 } LbExpressEthernetPortAddressEntry ::= SEQUENCE { lbExpressEthernetPortAddressPortIndex INTEGER, lbExpressEthernetPortAddressIndex INTEGER, lbExpressEthernetPortAddressSlotIndex INTEGER, lbExpressEthernetPortAddressType INTEGER, lbExpressEthernetPortAddressRemoteAddress OCTET STRING, lbExpressEthernetPortAddressIsStatic INTEGER, lbExpressEthernetPortAddressStaticPort INTEGER, lbExpressEthernetPortAddressAge INTEGER } lbExpressEthernetPortAddressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lbSystemExpressEthernetPortCount." ::= { lbExpressEthernetPortAddressEntry 1 } lbExpressEthernetPortAddressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The index of this address entry within the address table." ::= { lbExpressEthernetPortAddressEntry 2 } lbExpressEthernetPortAddressSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lbExpressEthernetPortAddressEntry 3 } lbExpressEthernetPortAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table." ::= { lbExpressEthernetPortAddressEntry 4 } lbExpressEthernetPortAddressRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS deprecated DESCRIPTION "The remote MAC address detected on this port." ::= { lbExpressEthernetPortAddressEntry 5 } lbExpressEthernetPortAddressIsStatic OBJECT-TYPE SYNTAX INTEGER { isStatic(1), isDynamic(2) } ACCESS read-write STATUS deprecated DESCRIPTION "A value indicating whether this MAC address was statically configured or was dynamically learned on this port." ::= { lbExpressEthernetPortAddressEntry 6 } lbExpressEthernetPortAddressStaticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "If the object lbExpressEthernetPortAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured." ::= { lbExpressEthernetPortAddressEntry 7 } lbExpressEthernetPortAddressAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "This object indicates the time, in seconds, elapsed since this MAC address was added to this port's address table." ::= { lbExpressEthernetPortAddressEntry 8 } -- Power Supply group lbPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF LbPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of power supply entries." ::= { lbPowerSupply 1 } lbPowerSupplyEntry OBJECT-TYPE SYNTAX LbPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A power supply entry contains information common for a particular power supply unit in the system." INDEX { lbPowerSupplyIndex } ::= { lbPowerSupplyTable 1 } LbPowerSupplyEntry ::= SEQUENCE { lbPowerSupplyIndex INTEGER, lbPowerSupplyLocation INTEGER, lbPowerSupplyStatus INTEGER, lbPowerSupplyFailureType INTEGER, lbPowerSupplyLastFailure INTEGER } lbPowerSupplyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each power supply in the system. It's value ranges between 1 and the value of lbSystemPowerSupplyCount." ::= { lbPowerSupplyEntry 1 } lbPowerSupplyLocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical slot in which this power supply unit resides in the system." ::= { lbPowerSupplyEntry 2 } lbPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply. A value of 0 indicates a working unit. A non-zero value represents a bit mask of the possible failure types. Each set bit indicates the following failure type: bit0: systemAcFailure bit1: systemPlus5Failure bit2: systemPlus12Failure bit3: systemOverTemperatureFailure." ::= { lbPowerSupplyEntry 3 } lbPowerSupplyFailureType OBJECT-TYPE SYNTAX INTEGER { systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4) } ACCESS not-accessible STATUS deprecated DESCRIPTION "This object is sent in the varlist when the lbPowerSupplyFailureEvent trap is generated. It indicates the particular failure type that caused this trap to be generated." ::= { lbPowerSupplyEntry 4 } lbPowerSupplyLastFailure OBJECT-TYPE SYNTAX INTEGER { systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4), none(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the most recent power supply failure type. If no failure has occured, the value of this object is none. This object is included in the varlist when the lbPowerSupplyFailureEvent trap is generated. It indicates the failure type that caused the trap to be generated." ::= { lbPowerSupplyEntry 5 } -- Bridge Function Group lbBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF LbBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of bridge function entries." ::= { lbBridge 1 } lbBridgeEntry OBJECT-TYPE SYNTAX LbBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A bridge entry contains information common to a particular bridge function in a given system." INDEX { lbBridgeIndex } ::= { lbBridgeTable 1 } LbBridgeEntry ::= SEQUENCE { lbBridgeIndex INTEGER, lbBridgeBaseSlotIndex INTEGER, lbBridgePortCount INTEGER, lbBridgeAddressTableSize INTEGER, lbBridgeAddressThreshold INTEGER, lbBridgeMode INTEGER, lbBridgeLocalIndex INTEGER } lbBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount." ::= { lbBridgeEntry 1 } lbBridgeBaseSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the lowest numbered slot which contains a physical port that this bridge function controls." ::= { lbBridgeEntry 2 } lbBridgePortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ports that this bridge function controls." ::= { lbBridgeEntry 3 } lbBridgeAddressTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the address table for this bridge function." ::= { lbBridgeEntry 4 } lbBridgeAddressThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lbBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lbBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lbBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lbBridgeAddressThresholdEvents since the limit will never be reached." ::= { lbBridgeEntry 5 } lbBridgeMode OBJECT-TYPE SYNTAX INTEGER { expressMode(1), ieee8021dBridgeMode(2), notSupported(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The operational mode of this bridge function. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation." ::= { lbBridgeEntry 6 } lbBridgeLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this bridge function relative to the slot on which it is physically present." ::= { lbBridgeEntry 7 } -- Bridge Port Table lbBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF LbBridgePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of bridge port entries." ::= { lbBridge 2 } lbBridgePortEntry OBJECT-TYPE SYNTAX LbBridgePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Port entry contains information for a particular bridge port in a given system." INDEX { lbBridgePortBridgeIndex, lbBridgePortIndex } ::= { lbBridgePortTable 1 } LbBridgePortEntry ::= SEQUENCE { lbBridgePortBridgeIndex INTEGER, lbBridgePortIndex INTEGER, lbBridgePortSlotIndex INTEGER, lbBridgePortLocalIndex INTEGER, lbBridgePortType INTEGER, lbBridgePortIpFragmentationEnabled INTEGER, lbBridgePortReceiveMulticastLimit INTEGER, lbBridgePortAddressAction INTEGER, lbBridgePortTotalForwardedCts Counter, lbBridgePortManagementFramesReceived Counter, lbBridgePortTotalDiscards Counter, lbBridgePortReceiveBlockedDiscards Counter, lbBridgePortReceiveMulticastLimitExceededs Counter, lbBridgePortReceiveSecurityDiscards Counter, lbBridgePortReceiveUnknownDiscards Counter, lbBridgePortReceiveOtherDiscards Counter, lbBridgePortReceiveErrorDiscards Counter, lbBridgePortSameSegmentDiscards Counter, lbBridgePortTransmitBlockedDiscards Counter, lbBridgePortTotalFiltered Counter, lbBridgePortReceiveUnicastFiltered Counter, lbBridgePortReceiveMulticastFiltered Counter, lbBridgePortTransmitUnicastFiltered Counter, lbBridgePortTransmitMulticastFiltered Counter, lbBridgePortReceiveMulticastLimitExceededCount Counter } lbBridgePortBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount." ::= { lbBridgePortEntry 1 } lbBridgePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references." ::= { lbBridgePortEntry 2 } lbBridgePortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lbBridgePortEntry 3 } lbBridgePortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this port relative to the slot on which it is physically present and its port type. For example FDDI ports in a slot are identified with local indices from 1 to the number of FDDI ports in that slot, and the Ethernet ports in the same slot are identified with local indices from 1 to the number of Ethernet ports in that slot." ::= { lbBridgePortEntry 4 } lbBridgePortType OBJECT-TYPE SYNTAX INTEGER { ethernet(1), fddi(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of this port." ::= { lbBridgePortEntry 5 } lbBridgePortIpFragmentationEnabled OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), notSupported(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag indicating whether or not IP fragmentation is enabled on this bridge port. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation." ::= { lbBridgePortEntry 6 } lbBridgePortReceiveMulticastLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is four seconds. The default value for this object is zero which implies an infinite rate." ::= { lbBridgePortEntry 7 } lbBridgePortAddressAction OBJECT-TYPE SYNTAX INTEGER { other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the port's address list. flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list." ::= { lbBridgePortEntry 8 } lbBridgePortTotalForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames forwarded from this port to all other ports of this bridge. Note that the total forwarded count is NOT equal to the receive count minus the discard count, as a single received multicast/broadcast frame can be forwarded to multiple bridge ports. Also frames which are 'flooded' because of unknown destination addresses account for multiple forwarding as well. The total forwarding count is the instantaneous sumation of the 'forwarded to' counts to all other ports of the bridge." ::= { lbBridgePortEntry 9 } lbBridgePortManagementFramesReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bridge management frames received by this port." ::= { lbBridgePortEntry 10 } lbBridgePortTotalDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames discarded by this port." ::= { lbBridgePortEntry 11 } lbBridgePortReceiveBlockedDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the the receiving bridge port was not in the 'forwarding' state." ::= { lbBridgePortEntry 12 } lbBridgePortReceiveMulticastLimitExceededs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast/broadcast frames discarded by this port because the lbBridgePortReceiveMulticastLimit was exceeded." ::= { lbBridgePortEntry 13 } lbBridgePortReceiveSecurityDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved." ::= { lbBridgePortEntry 14 } lbBridgePortReceiveUnknownDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the destination address was unknown. Note that this counter is only valid for FDDI ports, and only when the bridge is an EEM, or an ESM operating in express mode." ::= { lbBridgePortEntry 15 } lbBridgePortReceiveOtherDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops)." ::= { lbBridgePortEntry 16 } lbBridgePortReceiveErrorDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because of internal bridge system errors (e.g., hardware and software address table discrepencies)." ::= { lbBridgePortEntry 17 } lbBridgePortSameSegmentDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged." ::= { lbBridgePortEntry 18 } lbBridgePortTransmitBlockedDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the the transmitting bridge port was not in the 'forwarding' state." ::= { lbBridgePortEntry 19 } lbBridgePortTotalFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames discarded by this port due to user defined filters." ::= { lbBridgePortEntry 20 } lbBridgePortReceiveUnicastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined receive path filters." ::= { lbBridgePortEntry 21 } lbBridgePortReceiveMulticastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined receive multicast path filters." ::= { lbBridgePortEntry 22 } lbBridgePortTransmitUnicastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined transmit path filters." ::= { lbBridgePortEntry 23 } lbBridgePortTransmitMulticastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined transmit multicast path filters." ::= { lbBridgePortEntry 24 } lbBridgePortReceiveMulticastLimitExceededCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the lbBridgePortReceiveMulticastLimit was exceeded." ::= { lbBridgePortEntry 25 } -- Bridge Port Forwarded-To Table lbBridgePortForwardedToTable OBJECT-TYPE SYNTAX SEQUENCE OF LbBridgePortForwardedToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port forwarding count information." ::= { lbBridge 3 } lbBridgePortForwardedToEntry OBJECT-TYPE SYNTAX LbBridgePortForwardedToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A bridge port forwarded-to entry contains information on the count of frames forwarded from the receiving port indicated by the corresponding lbBridgePortForwardedToReceivePortIndex, to the destination port indicated by the corresponding lbBridgePortForwardedToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lbBridgePortForwardedToReceivePortIndex and the lbBridgePortForwardedToDstPortIndex objects." INDEX { lbBridgePortForwardedToBridgeIndex, lbBridgePortForwardedToReceivePortIndex, lbBridgePortForwardedToDstPortIndex } ::= { lbBridgePortForwardedToTable 1 } LbBridgePortForwardedToEntry ::= SEQUENCE { lbBridgePortForwardedToBridgeIndex INTEGER, lbBridgePortForwardedToReceivePortIndex INTEGER, lbBridgePortForwardedToDstPortIndex INTEGER, lbBridgePortForwardedToCount Counter } lbBridgePortForwardedToBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount." ::= { lbBridgePortForwardedToEntry 1 } lbBridgePortForwardedToReceivePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is forwarding frames." ::= { lbBridgePortForwardedToEntry 2 } lbBridgePortForwardedToDstPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being forwarded." ::= { lbBridgePortForwardedToEntry 3 } lbBridgePortForwardedToCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of frames forwarded from the receiving port to the destination port." ::= { lbBridgePortForwardedToEntry 4 } -- Bridge Port Filtered-To Table lbBridgePortFilteredToTable OBJECT-TYPE SYNTAX SEQUENCE OF LbBridgePortFilteredToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port filtering count information." ::= { lbBridge 4 } lbBridgePortFilteredToEntry OBJECT-TYPE SYNTAX LbBridgePortFilteredToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A bridge port filtered-to entry contains information on the count of frames filtered from the receiving port indicated by the corresponding lbBridgePortFilteredToReceivePortIndex, to the destination port indicated by the corresponding lbBridgePortFilteredToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lbBridgePortFilteredToReceivePortIndex and the lbBridgePortFilteredToDstPortIndex objects." INDEX { lbBridgePortFilteredToBridgeIndex, lbBridgePortFilteredToReceivePortIndex, lbBridgePortFilteredToDstPortIndex } ::= { lbBridgePortFilteredToTable 1 } LbBridgePortFilteredToEntry ::= SEQUENCE { lbBridgePortFilteredToBridgeIndex INTEGER, lbBridgePortFilteredToReceivePortIndex INTEGER, lbBridgePortFilteredToDstPortIndex INTEGER, lbBridgePortFilteredToCount Counter } lbBridgePortFilteredToBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount." ::= { lbBridgePortFilteredToEntry 1 } lbBridgePortFilteredToReceivePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is filtering frames." ::= { lbBridgePortFilteredToEntry 2 } lbBridgePortFilteredToDstPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being filtered." ::= { lbBridgePortFilteredToEntry 3 } lbBridgePortFilteredToCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of frames filtered from the receiving port to the destination port." ::= { lbBridgePortFilteredToEntry 4 } -- Bridge Port AddressTable lbBridgePortAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF LbBridgePortAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of bridge port address entries." ::= { lbBridge 5 } lbBridgePortAddressEntry OBJECT-TYPE SYNTAX LbBridgePortAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An bridge port address entry contains information about particular bridge port address in a given system." INDEX { lbBridgePortAddressBridgeIndex, lbBridgePortAddressPortIndex, lbBridgePortAddressIndex } ::= { lbBridgePortAddressTable 1 } LbBridgePortAddressEntry ::= SEQUENCE { lbBridgePortAddressBridgeIndex INTEGER, lbBridgePortAddressPortIndex INTEGER, lbBridgePortAddressIndex INTEGER, lbBridgePortAddressRemoteAddress OCTET STRING, lbBridgePortAddressType INTEGER, lbBridgePortAddressIsStatic INTEGER, lbBridgePortAddressStaticPort INTEGER, lbBridgePortAddressAge INTEGER } lbBridgePortAddressBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount." ::= { lbBridgePortAddressEntry 1 } lbBridgePortAddressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references." ::= { lbBridgePortAddressEntry 2 } lbBridgePortAddressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this address entry within the bridge address table." ::= { lbBridgePortAddressEntry 3 } lbBridgePortAddressRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "The remote MAC address detected on the port corresponding to this entry. Setting this object attempts to create a new entry in the table. Since the value of lbBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lbBridgePortAddressIndex is zero. A get-next using the values of lbBridgePortAddressBridgeIndex and lbBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry." ::= { lbBridgePortAddressEntry 4 } lbBridgePortAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table." ::= { lbBridgePortAddressEntry 5 } lbBridgePortAddressIsStatic OBJECT-TYPE SYNTAX INTEGER { isStatic(1), isDynamic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A value indicating whether this MAC address was statically configured or was dynamically learned." ::= { lbBridgePortAddressEntry 6 } lbBridgePortAddressStaticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If the object lbBridgePortAddressIsStatic has value isStatic(1), this object indicates the local port index (as reported by lbBridgePortLocalIndex) for which this MAC address was statically configured. If the object lbBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0." ::= { lbBridgePortAddressEntry 7 } lbBridgePortAddressAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the port corresponding to this entry." ::= { lbBridgePortAddressEntry 8 } -- Trap Enterprise Table lbTrapEnterpriseTable OBJECT-TYPE SYNTAX SEQUENCE OF LbTrapEnterpriseTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a listing of enterprises under which various traps are defined. In all cases except for the MIB-II generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap. Associated with each trap enterprise is a trap enterprise index." ::= { lbTrapEnterprise 1 } lbTrapEnterpriseTableEntry OBJECT-TYPE SYNTAX LbTrapEnterpriseTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information relating a specific trap enterprise OID with a trap enterprise index." INDEX { lbTrapEnterpriseIndex } ::= { lbTrapEnterpriseTable 1 } LbTrapEnterpriseTableEntry ::= SEQUENCE { lbTrapEnterpriseIndex INTEGER, lbTrapEnterpriseOID OBJECT IDENTIFIER } lbTrapEnterpriseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique index corresponding to a particular enterprise OID under which traps are defined. This value of this object corresponding to a particular enterprise OID will remain constant accross system resets." ::= { lbTrapEnterpriseTableEntry 1 } lbTrapEnterpriseOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "An enterpise OID under which traps are defined." ::= { lbTrapEnterpriseTableEntry 2 } -- Trap Destination Table lbTrapDestTable OBJECT-TYPE SYNTAX SEQUENCE OF LbTrapDestTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information specifying which traps will be transmitted by the LANplex to a given destination address. The table is indexed by the destination address, the index of the enterprise which generates the trap, and the trap number. Each entry in the table with a status of valid identifies a trap which, when generated, will be transmitted to the corresponding destination address listed in that entry." ::= { lbTrapDest 1 } lbTrapDestTableEntry OBJECT-TYPE SYNTAX LbTrapDestTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information relating a trap with a destination address to which the trap will be sent when it is generated." INDEX { lbTrapDestAddr, lbTrapDestEnterpriseIndex, lbTrapNumber } ::= { lbTrapDestTable 1 } LbTrapDestTableEntry ::= SEQUENCE { lbTrapDestAddr NetworkAddress, lbTrapDestEnterpriseIndex INTEGER, lbTrapNumber INTEGER, lbTrapEntryStatus INTEGER } lbTrapDestAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address to which the trap identified by this entry is to be transmitted." ::= { lbTrapDestTableEntry 1 } lbTrapDestEnterpriseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The enterprise index of the enterprise identified in this entry. The value of this object is the same as the lbTrapEnterpriseIndex value for a given enterprise." ::= { lbTrapDestTableEntry 2 } lbTrapNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the trap within the corresponding enterprise for this entry." ::= { lbTrapDestTableEntry 3 } lbTrapEntryStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the trap destination table entry. Setting this object to valid has the effect of attempting to add the row corresponding to the instance specified. If the instance already exists, the set is successful (with no new entry added). If the instance specified is invalid, the set fails, otherwise the set succeeds and results in a new entry being added to the table. Setting this object to invalid has the effect of removing the corresponding entry from the table." ::= { lbTrapDestTableEntry 4 } -- lb3gh MIB traps lbSlotInsertEvent TRAP-TYPE ENTERPRISE lb3ghMib VARIABLES { lbSlotIndex, lbSlotBoardType, lbSlotBoardRevision } DESCRIPTION "The SNMP trap that is generated when a board is inserted into a particular slot in the chassis." ::= 1 lbSlotExtractEvent TRAP-TYPE ENTERPRISE lb3ghMib VARIABLES { lbSlotIndex } DESCRIPTION "The SNMP trap that is generated when a board is extracted from a particular slot in the chassis." ::= 2 lbBridgeAddressThresholdEvent TRAP-TYPE ENTERPRISE lb3ghMib VARIABLES { lbBridgeIndex, lbBridgeBaseSlotIndex } DESCRIPTION "The SNMP trap that is generated when the number of addresses stored in the bridge reaches lbBridgeAddressThreshold." ::= 3 -- The lbBridgePortAddressLearnedEvent and the lbBridgePortAddressForgottenEvent -- traps are obsolete and are no longer supported. lbSystemOverTemperatureEvent TRAP-TYPE ENTERPRISE lb3ghMib DESCRIPTION "The SNMP trap that is generated when the system temperature exceeds a certain threshold." ::= 6 lbSlotOverTemperatureEvent TRAP-TYPE ENTERPRISE lb3ghMib VARIABLES { lbSlotIndex, lbSlotBoardType, lbSlotBoardRevision, lbSlotBoardStatus } DESCRIPTION "The SNMP trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold." ::= 7 lbPowerSupplyFailureEvent TRAP-TYPE ENTERPRISE lb3ghMib VARIABLES { lbPowerSupplyIndex, lbPowerSupplyLocation, lbPowerSupplyLastFailure, lbSystemPowerSupplyCount} DESCRIPTION "The SNMP trap that is generated when a power supply unit fails in the system." ::= 8 END