-- These MIBs were created on 1/7/2003 -- This module defines enterprise MIBs for NS OSPF TRAP -- -- Copyright (c) 1999-2004, Juniper Networks, Inc. -- All rights reserved. NETSCREEN-OSPF-TRAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF netscreenTrapDesc, netscreenTrapType FROM NETSCREEN-TRAP-MIB nsOspfRouterId, nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfIfState, nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfVirtIfState, nsOspfNbrIpAddr, nsOspfNbrAddressLessIndex, nsOspfNbrRtrId, nsOspfNbrState, nsOspfVirtNbrArea, nsOspfVirtNbrRtrId, nsOspfVirtNbrState, nsOspfLsdbType, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbAreaId, nsOspfExtLsdbLimit, nsOspf, nsOspfIfVRID, nsOspfVirtIfVRID, nsOspfNbrVRID, nsOspfVirtNbrVRID, nsOspfLsdbVRID FROM NETSCREEN-OSPF-MIB; nsOspfTrap MODULE-IDENTITY LAST-UPDATED "200405032022Z" -- May 03, 2004 ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO "Customer Support 1194 North Mathilda Avenue Sunnyvale, California 94089-1206 USA Tel: 1-800-638-8296 E-mail: customerservice@juniper.net HTTP://www.juniper.net" DESCRIPTION "The MIB module to describe traps for the OSPF Version 2 Protocol." ::= { nsOspf 16 } -- Trap Support Objects -- The following are support objects for the OSPF traps. nsOspfTrapControl OBJECT IDENTIFIER ::= { nsOspfTrap 1 } nsOspfTraps OBJECT IDENTIFIER ::= { nsOspfTrap 2 } nsOspfSetTrap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0." ::= { nsOspfTrapControl 1 } nsOspfConfigErrorType OBJECT-TYPE SYNTAX INTEGER { badVersion (1), areaMismatch (2), unknownNbmaNbr (3), -- Router is Dr eligible unknownVirtualNbr (4), authTypeMismatch(5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Potential types of configuration conflicts. Used by the nsOspfConfigError and nsOspfConfigVir- tError traps." ::= { nsOspfTrapControl 2 } nsOspfPacketType OBJECT-TYPE SYNTAX INTEGER { hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF packet types." ::= { nsOspfTrapControl 3 } nsOspfPacketSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of an inbound packet that can- not be identified by a neighbor instance." ::= { nsOspfTrapControl 4 } -- Traps nsOspfIfStateChange NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfIfState, -- The new state nsOspfIfVRID } STATUS current DESCRIPTION "An nsOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)." ::= { nsOspfTraps 16 } nsOspfVirtIfStateChange NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfVirtIfState, -- The new state nsOspfVirtIfVRID } STATUS current DESCRIPTION "An nsOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point)." ::= { nsOspfTraps 1 } nsOspfNbrStateChange NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfNbrIpAddr, nsOspfNbrAddressLessIndex, nsOspfNbrRtrId, nsOspfNbrState, -- The new state nsOspfNbrVRID } STATUS current DESCRIPTION "An nsOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by nsOspfIfStateChange." ::= { nsOspfTraps 2 } nsOspfVirtNbrStateChange NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfVirtNbrArea, nsOspfVirtNbrRtrId, nsOspfVirtNbrState, -- The new state nsOspfVirtNbrVRID } STATUS current DESCRIPTION "An nsOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full)." ::= { nsOspfTraps 3 } nsOspfIfConfigError NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfPacketSrc, -- The source IP address nsOspfConfigErrorType, -- Type of error nsOspfPacketType, nsOspfIfVRID } STATUS current DESCRIPTION "An nsOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming." ::= { nsOspfTraps 4 } nsOspfVirtIfConfigError NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfConfigErrorType, -- Type of error nsOspfPacketType, nsOspfVirtIfVRID } STATUS current DESCRIPTION "An nsOspfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming." ::= { nsOspfTraps 5 } nsOspfIfAuthFailure NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfPacketSrc, -- The source IP address nsOspfConfigErrorType, -- authTypeMismatch or -- authFailure nsOspfPacketType, nsOspfIfVRID } STATUS current DESCRIPTION "An nsOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type." ::= { nsOspfTraps 6 } nsOspfVirtIfAuthFailure NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfConfigErrorType, -- authTypeMismatch or -- authFailure nsOspfPacketType, nsOspfVirtIfVRID } STATUS current DESCRIPTION "An nsOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type." ::= { nsOspfTraps 7 } nsOspfIfRxBadPacket NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfPacketSrc, -- The source IP address nsOspfPacketType, nsOspfIfVRID } STATUS current DESCRIPTION "An nsOspfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed." ::= { nsOspfTraps 8 } nsOspfVirtIfRxBadPacket NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfPacketType, nsOspfVirtIfVRID } STATUS current DESCRIPTION "An nsOspfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed." ::= { nsOspfTraps 9 } nsOspfTxRetransmit NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfNbrRtrId, -- Destination nsOspfPacketType, nsOspfLsdbType, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbVRID } STATUS current DESCRIPTION "An nsOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry." ::= { nsOspfTraps 10 } nsOspfVirtIfTxRetransmit NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfPacketType, nsOspfLsdbType, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbVRID } STATUS current DESCRIPTION "An nsOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry." ::= { nsOspfTraps 11 } nsOspfOriginateLsa NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfLsdbAreaId, -- 0.0.0.0 for AS Externals nsOspfLsdbType, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbVRID } STATUS current DESCRIPTION "An nsOspfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge." ::= { nsOspfTraps 12 } nsOspfMaxAgeLsa NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfLsdbAreaId, -- 0.0.0.0 for AS Externals nsOspfLsdbType, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbVRID } STATUS current DESCRIPTION "An nsOspfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge." ::= { nsOspfTraps 13 } nsOspfLsdbOverflow NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfExtLsdbLimit, nsOspfLsdbVRID } STATUS current DESCRIPTION "An nsOspfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded nsOspfExtLsdbLimit." ::= { nsOspfTraps 14 } nsOspfLsdbApproachingOverflow NOTIFICATION-TYPE OBJECTS { netscreenTrapType, netscreenTrapDesc, nsOspfRouterId, -- The originator of the trap nsOspfExtLsdbLimit, nsOspfLsdbVRID } STATUS current DESCRIPTION "An nsOspfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of nsOspfExtLsdbLimit." ::= { nsOspfTraps 15 } END