-- Domino MIB Specification (the "Specification") Version 4.6 -- Copyright (c) 1994-1997 Lotus Development Corp. -- --Use and restrictions. You are permitted to use, reproduce and distribute --the Specification and this document ("Document"), provided you comply --with the following terms. -- --You shall distribute the Specification and Document with the text of this --entire copyright notice and agreement. You may not modify, alter or create --derivatives of the Specification or Document without prior written --permission from Lotus. You may not loan or license the Specification or Document, or --any copy. -- --Ownership. All intellectual property rights in the Specification and --Document are owned by Lotus or its suppliers and are protected by United --States and Canadian copyright laws, other applicable copyright laws, and --international treaty provisions. --Lotus retains all rights not expressly granted. -- --No warranty. Lotus is supplying the Specification and Document "as is", --without warranty, representation, promise or guarantee, either express or --implied, statutory or otherwise, with respect to the Specification and --Document, including their quality, performance, merchantability or fitness --for a particular purpose. -- --LIMITATION OF LIABILITY --Because software is inherently complex and may not be completely free of --errors, it is your responsibility to verify your work and to make backup --copies, and Lotus will not be responsible for your failure to do so. In --no event will Lotus be liable for direct, indirect, special, incidental, --or consequential damages arising out of this Agreement or out of the use --Lotus products or services, including, without limitation, damages or --costs relating to the loss of profits, business, goodwill, data or --computer programs, even if advised of the possibility of such damages. The --foregoing limitations shall not apply to claims relating to death or --personal injury which arise out of products deemed to be consumer goods --under applicable law. Some states or provinces do not allow the exclusion --or limitation of implied warranties or limitation of liability for --incidental or consequential damages, so the above exclusion or limitation --may not apply to you. -- --For U.S. customers: Should you have any questions concerning this --Agreement or Lotus software use policies, write to Inside Sales and --Service, Lotus Development Corporation, 55 Cambridge Parkway, --Cambridge, MA 02142, or call 1-800-343-5414. NOTES-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; --Definitions for Lotus enterprise branch and Notes sub-branch lotus OBJECT IDENTIFIER ::= { enterprises 334 } notes OBJECT IDENTIFIER ::= { lotus 72 } notesPump OBJECT IDENTIFIER ::= { lotus 73 } --Definitions of Notes main groups lnInfo OBJECT IDENTIFIER ::= { notes 1 } lnControl OBJECT IDENTIFIER ::= { notes 2 } lnInterceptor OBJECT IDENTIFIER ::= { notes 3 } lnUnix OBJECT IDENTIFIER ::= { notes 4 } mapInfo OBJECT IDENTIFIER ::= { notes 100 } --Definitions of sub-groups of the lnInfo group lnStats OBJECT IDENTIFIER ::= { lnInfo 1 } --Definitions of sub-groups of the lnStats group lnMail OBJECT IDENTIFIER ::= { lnStats 4 } lnReplica OBJECT IDENTIFIER ::= { lnStats 5 } lnServer OBJECT IDENTIFIER ::= { lnStats 6 } lnComm OBJECT IDENTIFIER ::= { lnStats 7 } lnDisk OBJECT IDENTIFIER ::= { lnStats 8 } lnMem OBJECT IDENTIFIER ::= { lnStats 9 } lnDatabase OBJECT IDENTIFIER ::= { lnStats 10 } lnAgentMgr OBJECT IDENTIFIER ::= { lnStats 11 } lnMTA OBJECT IDENTIFIER ::= { lnStats 12 } lnWeb OBJECT IDENTIFIER ::= { lnStats 13 } lnObject OBJECT IDENTIFIER ::= { lnStats 14 } lnDomino OBJECT IDENTIFIER ::= { lnStats 15 } lnCalendar OBJECT IDENTIFIER ::= { lnStats 16 } lnCollector OBJECT IDENTIFIER ::= { lnStats 17 } --Definitions of sub-groups of the lnServer group lnServerTask OBJECT IDENTIFIER ::= { lnServer 1 } lnServerInfo OBJECT IDENTIFIER ::= { lnServer 2 } lnServerStats OBJECT IDENTIFIER ::= { lnServer 3 } lnCluster OBJECT IDENTIFIER ::= { lnServer 4 } --Definitions of sub-groups of the lnCluster group lnOpenRedirects OBJECT IDENTIFIER ::= { lnCluster 8 } lnOpenRequest OBJECT IDENTIFIER ::= { lnCluster 9 } lnClusterTrans OBJECT IDENTIFIER ::= { lnCluster 10 } --Definitions of sub-groups of the lnReplica group lnReplicaCluster OBJECT IDENTIFIER ::= { lnReplica 6 } -- ****************************************************************** -- Define information provided to us by the Main Proxy Agent. -- ****************************************************************** lnMainProxyAgentVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Information relevant to the Lotus Main SNMP Proxy Agent" ::= {mapInfo 1 } -- ****************************************************************** -- LNSTATS GROUP -- ****************************************************************** --The full (uninterpreted) statistics structure table lnAllStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LnAllStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing a one statistic per entry view of the entire Notes server statistics structure." ::= { lnStats 1 } lnAllStatsEntry OBJECT-TYPE SYNTAX LnAllStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnAllStatsTable." INDEX { lnStatisticIndex } ::= { lnAllStatsTable 1 } LnAllStatsEntry ::= SEQUENCE { lnStatisticIndex INTEGER, lnStatisticString DisplayString } lnStatisticIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each statistic in the Notes server statistics structure." ::= { lnAllStatsEntry 1 } lnStatisticString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string describing one statistic from the Notes Server statistics structure." ::= { lnAllStatsEntry 2 } --Times related to statistics lnStatsStartTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Time and date at which the statistics agent was last started. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnStats 2 } lnStatsCurrentTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Time and date of the last statistics update. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnStats 3 } -- ****************************************************************** -- LNMAIL GROUP -- ****************************************************************** lnDeadMail OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of dead (undeliverable) mail messages." ::= { lnMail 1 } lnDeliveredMail OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of messges received by router." ::= { lnMail 2 } lnTotalMailFailures OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Total number of routing failures since the server started." ::= { lnMail 3 } lnTotalRoutedMail OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Total number of mail messages routed since the server started." ::= { lnMail 4 } lnTransferredMail OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of messages router attempted to transfer." ::= { lnMail 5 } lnWaitingMail OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of mail messages waiting to be routed." ::= { lnMail 6 } lnNumWaitingRecipients OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of pending mail messages awaiting local delivery." ::= { lnMail 7 } lnMailDomain OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Notes server's mail domain." ::= { lnMail 8 } lnAverageMailDeliverTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Average time for mail delivery in seconds." ::= { lnMail 9 } lnAverageMailServerHops OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Average number of server hops for mail delivery." ::= { lnMail 10 } lnAverageMailSizeDelivered OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Average size of mail messages delivered in bytes." ::= { lnMail 11 } lnMaximumMailDeliverTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum time for mail delivery in seconds." ::= { lnMail 12 } lnMaximumMailServerHops OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum number of server hops for mail delivery." ::= { lnMail 13 } lnMaximumMailSizeDelivered OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum size of mail delivered in bytes." ::= { lnMail 14 } lnMinimumMailDeliverTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Minimum time for mail delivery in seconds." ::= { lnMail 15 } lnMinimumMailServerHops OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Minimum number of server hops for mail delivery." ::= { lnMail 16 } lnMinimumMailSizeDelivered OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Minimum size of mail delivered in bytes." ::= { lnMail 17 } lnTotalKBTransferred OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Total mail transferred in kilobytes." ::= { lnMail 18 } lnMailTransferFailures OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of mail messages the router was unable to transfer." ::= { lnMail 19 } -- ****************************************************************** -- LNREPLICA GROUP -- ****************************************************************** lnRepDocsAdded OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of docs added via replication since server was started." ::= { lnReplica 1 } lnRepDocsDeleted OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of docs deleted via replication since server was started." ::= { lnReplica 2 } lnRepDocsUpdated OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of docs updated via replication since server was started." ::= { lnReplica 3 } lnRepFailed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of replications that generated an error." ::= { lnReplica 4 } lnRepSuccessful OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of successful replications." ::= { lnReplica 5 } -- ****************************************************************** -- LNREPLICACLUSTER GROUP -- ****************************************************************** lnRepClusterDocsAdded OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of documents added by the cluster replicator" ::= { lnReplicaCluster 1 } lnRepClusterDocsDeleted OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of documents deleted by the cluster replicator" ::= { lnReplicaCluster 2 } lnRepClusterDocsUpdated OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of documents updated by the cluster replicator" ::= { lnReplicaCluster 3 } lnRepClusterFailed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of failed replications since server startup." ::= { lnReplicaCluster 4 } lnRepClusterFilesLocal OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of databases on the current server for which there are replicas on other servers in the cluster." ::= { lnReplicaCluster 5 } lnRepClusterFilesRemote OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of databases on other servers to which the cluster replicator pushes changes." ::= { lnReplicaCluster 6 } lnRepClusterRetrySkipped OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times the cluster replicator did not attempt to replicate a database. The retry is skipped when the destination server is known to be unreachable, or the database is waiting for another retry attempt." ::= { lnReplicaCluster 7 } lnRepClusterRetryWaiting OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of replicas that are waiting for retry attempts." ::= { lnReplicaCluster 8 } lnRepClusterSecondsOnQueue OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The amount of time in seconds that the last database replicated spent on the work queue." ::= { lnReplicaCluster 9 } lnRepClusterSecondsOnQueueAvg OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The average amount of time in seconds that a database spent on the work queue." ::= { lnReplicaCluster 10 } lnRepClusterSecondsOnQueueMax OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The maximum amount of time in seconds that a database spent on the work queue." ::= { lnReplicaCluster 11 } lnRepClusterServers OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of other servers in the cluster that are receiving replications from this server." ::= { lnReplicaCluster 12 } lnRepClusterSessionBytesIn OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of bytes received during cluster replication" ::= { lnReplicaCluster 13 } lnRepClusterSessionBytesOut OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of bytes sent during cluster replication" ::= { lnReplicaCluster 14 } lnRepClusterSuccessful OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of successful replications since server startup." ::= { lnReplicaCluster 15 } lnRepClusterWorkQueueDepth OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The current number of databases awaiting replication by the cluster replicator." ::= { lnReplicaCluster 16 } lnRepClusterWorkQueueDepthAvg OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The average work queue depth since server startup." ::= { lnReplicaCluster 17 } lnRepClusterWorkQueueDepthMax OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The maximum depth reached by the work queue since server startup." ::= { lnReplicaCluster 18 } -- ****************************************************************** -- LNSERVERTASK GROUP -- ****************************************************************** lnTaskCount OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of Notes server tasks currently executing." ::= { lnServerTask 1 } lnTaskTable OBJECT-TYPE SYNTAX SEQUENCE OF LnTaskEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing one entry for each Notes server task that is actually running." ::= { lnServerTask 2 } lnTaskEntry OBJECT-TYPE SYNTAX LnTaskEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnTaskTable." INDEX { lnTaskIndex } ::= { lnTaskTable 1 } LnTaskEntry ::= SEQUENCE { lnTaskIndex INTEGER, lnTaskType INTEGER, lnTaskData DisplayString, lnTaskName DisplayString } lnTaskIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each entry in lnTaskTable." ::= { lnTaskEntry 1 } lnTaskType OBJECT-TYPE SYNTAX INTEGER { databaseserver(1), event(2), reporter(3), replicator(4), indexer(5), router(6), eventinterceptor(7), querysethandler(8), reflectoragent(9), webretriever(10), calendarconnector(11), schedulemanager(12), unknownaddin(13), adminprocess(14), httpwebserver(15), chronos(16), collector(17), inotes(18), billing(19), clusterreplicator(20), clusterdbdirmgr(21), clusteradmin(22), agentmanager(23), cataloger(24), databasecompactor(25), designer(26), objectstoremgr(27), pop3server(28), statistics(29), stats(30), databasefixup(31), innews(32), webpublisher(33), ccmailmta(34), smtpmta(35), x400mta(36), ldapserver(37), nntpserver(38), imapserver(39), imap4server(40) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of server task being represented by this entry" ::= { lnTaskEntry 2 } lnTaskData OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Information associated with this task entry. See the description for lnTaskType." ::= { lnTaskEntry 3 } lnTaskName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The actual name of the task as it appears in the SERVER.TASK statistic on the server" ::= { lnTaskEntry 4 } lnReplicatorStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Status of the Replicator task. Provided as a separate MIB variable for the sake of efficiency." ::= { lnServerTask 3 } lnRouterStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Status of the Router task. Provided as a separate MIB variable for the sake of efficiency." ::= { lnServerTask 4 } lnEventStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Status of the Event task. Provided as a separate MIB variable for the sake of efficiency." ::= { lnServerTask 5 } -- ****************************************************************** -- LNSERVERINFO GROUP -- ****************************************************************** lnServerName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Server Name." ::= { lnServerInfo 1 } lnServerTitle OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Title assigned to this server." ::= { lnServerInfo 2 } lnServerAdministrators OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Contents of Administrator field from server record in Public Address book." ::= { lnServerInfo 3 } lnServerNotesVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Release of the Notes server that is running." ::= { lnServerInfo 4 } lnServerSystemVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Release of the Operating System running on the server." ::= { lnServerInfo 5 } lnServerBootID OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Unique number identifying the time this server was last booted." ::= { lnServerInfo 6 } lnServerDataPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Drive and directory defined as this server's data directory." ::= { lnServerInfo 7 } lnServerSwapPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Drive and directory for this server's swap file (NOTE: this stat relies on the NOTES.INI variable 'SWAPPATH' if config.sys contains a swap path different from the default.)" ::= { lnServerInfo 8 } lnServerRS232Ports OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of RS232 ports on this server." ::= { lnServerInfo 9 } lnServerCoprocessor OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS optional DESCRIPTION "Returns 'Yes', if server is a 486 or 386 w/ 387, otherwise, Returns 'No'." ::= { lnServerInfo 10 } lnServerOS OBJECT-TYPE SYNTAX INTEGER { os2(1), netware(2), windowsnt(3), unix(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Operating System the current Notes server is running." ::= { lnServerInfo 11 } lnServerCPUCount OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of processors installed on this server." ::= { lnServerInfo 12 } lnServerCPUType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The type of processor installed on the server (386,486, Pentium, etc)." ::= { lnServerInfo 13 } lnServerUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF LnServerUsersEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table containing one entry for each Notes user on the server." ::= { lnServerInfo 14 } lnServerPorts OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "A list of ports on the server." ::= { lnServerInfo 15 } lnServerPoweredBy OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Indicates what is powering the Domino server. A value here would indicate the system is running Release 4.5 or better of the Domino server. Value should = Notes" ::= { lnServerInfo 16 } lnServerUsersEntry OBJECT-TYPE SYNTAX LnServerUsersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnServerUsersTable." INDEX { lnServerUsersIndex } ::= { lnServerUsersTable 1 } LnServerUsersEntry ::= SEQUENCE { lnServerUsersIndex INTEGER, lnServerUserName DisplayString, lnServerUserSessionID DisplayString, lnServerUserAccessedDBs INTEGER } lnServerUsersIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each entry in lnServerUsersTable." ::= { lnServerUsersEntry 1 } lnServerUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Notes UserName of server user." ::= { lnServerUsersEntry 2 } lnServerUserSessionID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user's Notes session ID." ::= { lnServerUsersEntry 3 } lnServerUserAccessedDBs OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of databases accessed by the users." ::= { lnServerUsersEntry 4 } -- ****************************************************************** -- LNSERVERSTATS GROUP -- ****************************************************************** lnServerDroppedSessions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of dropped sessions." ::= { lnServerStats 1 } lnServerTransPerMin OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Average number of transactions per minute since the server was started." ::= { lnServerStats 2 } lnServerTransPerMinPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Peak number of transactions that took place in any given minute since the server was started." ::= { lnServerStats 3 } lnServerTransPerMinPeakTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Date and time when the peak number of transactions per minute was last reached. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnServerStats 4 } lnServerTransTotal OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Total number of transactions the server has completed since it was started." ::= { lnServerStats 5 } lnServerUsers OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of users with sessions open on the server." ::= { lnServerStats 6 } lnServerUsers1MinPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The peak number of concurrent users active within the last minute." ::= { lnServerStats 7 } lnServerUsers1MinPeakTime OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Date and time when the peak number of active concurrent users were reached within the last minute. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnServerStats 8 } lnServerUsers5MinPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The peak number of concurrent users that were active within the last five minutes." ::= { lnServerStats 9 } lnServerUsers5MinPeakTime OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Date and time when the peak number of active concurrent users were reached within the last five minutes. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnServerStats 10 } lnServerUsersPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The peak number of concurrent users with open sessions since the server was started." ::= { lnServerStats 11 } lnServerUsersPeakTime OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Date and time when the peak number of concurrent users with open sessions was last reached. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnServerStats 12 } lnServerOpenReqMaxUsers OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times that a client has attempted to open a database on this server when the server was at its MAXUSERS limit." ::= { lnServerStats 13 } lnServerOpenReqPreV4Client OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times Notes Release 4.0 (or higher) clients have attempted to open a database on this server." ::= { lnServerStats 14 } lnServerOpenReqRestricted OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times that a client has attempted to open a database on this server when the server was RESTRICTED." ::= { lnServerStats 15 } lnServerOpenReqV4Client OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times Notes Clients post Release 4.0 have attempted to open a database on this server." ::= { lnServerStats 16 } lnServerBusyTimeQueryReceivedCount OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of external 'busytime' queries the server has received." ::= { lnServerStats 17 } lnServerBusyTimeQueryRetObjSched OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of schedules that were returned by queries counted by lnServerBusyTimeQueriesReceivedCount" ::= { lnServerStats 18 } -- ****************************************************************** -- LNCOMM GROUP -- ****************************************************************** lnNumClosedOldSessions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of sessions dropped because of too many concurrent users." ::= { lnComm 1 } lnNetbiosTable OBJECT-TYPE SYNTAX SEQUENCE OF LnNetbiosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing one entry for each active NetBIOS port on the server. Notes R3 only." ::= { lnComm 2 } lnNetbiosEntry OBJECT-TYPE SYNTAX LnNetbiosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnNetbiosTable, Notes R3" INDEX { lnNBIndex } ::= { lnNetbiosTable 1 } LnNetbiosEntry ::= SEQUENCE { lnNBIndex INTEGER, lnNBPort DisplayString, lnNBUnitNumber INTEGER, lnNBMajVersion INTEGER, lnNMMinVersion INTEGER, lnNBReportPeriod INTEGER, lnNBInUseSessions INTEGER, lnNBMaxSessions INTEGER, lnNBAvailCmdBlocks INTEGER, lnNBTotalCmdBlocks INTEGER, lnNBPacketSize INTEGER, lnNBReceivedPackets INTEGER, lnNBSentPackets INTEGER, lnNBAbortedTransmissions INTEGER, lnNBRetriedTransmissions INTEGER, lnNBAlignmentErrors INTEGER, lnNBCollisionErrors INTEGER, lnNBCRCErrors INTEGER } lnNBIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each entry in lnNetbiosTable." ::= { lnNetbiosEntry 1 } lnNBPort OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "NetBIOS port associated with this table entry." ::= { lnNetbiosEntry 2 } lnNBUnitNumber OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Unit number for this NetBIOS port." ::= { lnNetbiosEntry 3 } lnNBMajVersion OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Major version number of the NetBIOS driver being run on this port." ::= { lnNetbiosEntry 4 } lnNMMinVersion OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Minor version number of the NetBIOS driver being run on this port." ::= { lnNetbiosEntry 5 } lnNBReportPeriod OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Period of time over which the statistics for this port have been accumulating." ::= { lnNetbiosEntry 6 } lnNBInUseSessions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of NetBIOS sessions currently in use." ::= { lnNetbiosEntry 7 } lnNBMaxSessions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of concurrent NetBIOS sessions configured for this port." ::= { lnNetbiosEntry 8 } lnNBAvailCmdBlocks OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of NetBIOS command blocks which are currently available for use." ::= { lnNetbiosEntry 9 } lnNBTotalCmdBlocks OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of NetBIOS command blocks configured for this port." ::= { lnNetbiosEntry 10 } lnNBPacketSize OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Packet size for this NetBIOS port (in bytes)." ::= { lnNetbiosEntry 11 } lnNBReceivedPackets OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received by this port." ::= { lnNetbiosEntry 12 } lnNBSentPackets OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets sent from this port." ::= { lnNetbiosEntry 13 } lnNBAbortedTransmissions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of aborted transmissions for this port." ::= { lnNetbiosEntry 14 } lnNBRetriedTransmissions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of retried transmissions for this port." ::= { lnNetbiosEntry 15 } lnNBAlignmentErrors OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of alignment errors for this port." ::= { lnNetbiosEntry 16 } lnNBCollisionErrors OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of collision errors for this port." ::= { lnNetbiosEntry 17 } lnNBCRCErrors OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of checksum errors for this port." ::= { lnNetbiosEntry 18 } lnXPCTable OBJECT-TYPE SYNTAX SEQUENCE OF LnXPCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing one entry for each active XPC port on the server." ::= { lnComm 3 } lnXPCEntry OBJECT-TYPE SYNTAX LnXPCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnXPCTable." INDEX { lnXPCIndex } ::= { lnXPCTable 1 } LnXPCEntry ::= SEQUENCE { lnXPCIndex INTEGER, lnXPCPort DisplayString, lnXPCStatus DisplayString, lnXPCCarrierSpeed INTEGER, lnXPCPortSpeed INTEGER, lnXPCActiveSessions INTEGER, lnXPCKiloBytesReceived INTEGER, lnXPCKiloBytesSent INTEGER, lnXPCMsgsReceived INTEGER, lnXPCMsgsSent INTEGER, lnXPCCRCErrors INTEGER, lnXPCPortErrors INTEGER, lnXPCRetransmissions INTEGER } lnXPCIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each entry in the lnXPCTable." ::= { lnXPCEntry 1 } lnXPCPort OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "XPC port associated with this table entry." ::= { lnXPCEntry 2 } lnXPCStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The status of this XPC port." ::= { lnXPCEntry 3 } lnXPCCarrierSpeed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Communication speed (in bits per second) between local modem and remote modem." ::= { lnXPCEntry 4 } lnXPCPortSpeed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Communication speed (in bits per second) between server and local modem." ::= { lnXPCEntry 5 } lnXPCActiveSessions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of active user sessions on this XPC port." ::= { lnXPCEntry 6 } lnXPCKiloBytesReceived OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of kilobytes received by this port." ::= { lnXPCEntry 7 } lnXPCKiloBytesSent OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of kilobytes sent by this port." ::= { lnXPCEntry 8 } lnXPCMsgsReceived OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of messages received by this port." ::= { lnXPCEntry 9 } lnXPCMsgsSent OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of messages sent by this port." ::= { lnXPCEntry 10 } lnXPCCRCErrors OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of checksum errors from this port." ::= { lnXPCEntry 11 } lnXPCPortErrors OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of port errors." ::= { lnXPCEntry 12 } lnXPCRetransmissions OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of retransmissions from this port." ::= { lnXPCEntry 13 } lnAppleTalkStatsLogged OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of AppleTalk statistics logged by the Notes server." ::= { lnComm 4 } lnNetWareSPXIIStatsLogged OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of NetWare SPX II statistics logged by the Notes server." ::= { lnComm 5 } lnNetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LnNetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing one entry for each configured Notes network port on the server. This table is new to the MIB as of Notes Release 4. This table replaces most of the lnComm variables, remaining for backward compatibility, found in Release 3 of Notes." ::= { lnComm 6 } lnNetPortEntry OBJECT-TYPE SYNTAX LnNetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnNetPortTable. This is specific to Notes Release 4." INDEX { lnNetPortIndex } ::= { lnNetPortTable 1 } LnNetPortEntry ::= SEQUENCE { lnNetPortIndex INTEGER, lnNetPortName DisplayString, lnNetPortKBytesRec INTEGER, lnNetPortKBytesSent INTEGER, lnNetPortSessEstIn INTEGER, lnNetPortSessEstOut INTEGER, lnNetPortSessLimit INTEGER, lnNetPortSessLimitMax INTEGER, lnNetPortSessLimitMin INTEGER, lnNetPortSessPeak INTEGER, lnNetPortSessRecycled INTEGER, lnNetPortSessRecycling INTEGER, lnSNARemoteLU INTEGER, lnSNALocalLU INTEGER, lnSNALNCVersion INTEGER, lnSNAVersion INTEGER, lnSNAMaxSessions INTEGER, lnSNAActiveSessions INTEGER, lnSNATPType INTEGER, lnSNATPState INTEGER, lnSNAConversationId INTEGER, lnSNAMaxSendRUSize INTEGER, lnSNAMaxRcvRUSize INTEGER, lnSNASendPacingSize INTEGER, lnSNARcvPacingSize INTEGER, lnSNAPacingType INTEGER, lnX25LocalResets INTEGER, lnX25RemoteResets INTEGER, lnX25WindowSize INTEGER, lnX25FrameSize INTEGER, lnX25PktSize INTEGER, lnX25UnderRuns INTEGER, lnX25OverRuns INTEGER, lnX25REJTran INTEGER, lnX25REJRcv INTEGER, lnX25VCCfg INTEGER, lnX25VCInUse INTEGER, lnX25CRCErrors INTEGER, lnX25LocalDTEAddress INTEGER } lnNetPortIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each entry in lnPortTable." ::= {lnNetPortEntry 1} lnNetPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The port name associate with this entry." ::= {lnNetPortEntry 2} lnNetPortKBytesRec OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total kilobytes received on this port. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnNetPortEntry 3} lnNetPortKBytesSent OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total kilobytes sent on this port. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnNetPortEntry 4} lnNetPortSessEstIn OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound sessions established on this port." ::= {lnNetPortEntry 5} lnNetPortSessEstOut OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound sessions established on this port." ::= {lnNetPortEntry 6} lnNetPortSessLimit OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The current limit on the number of concurrent sessions on the port." ::= {lnNetPortEntry 7} lnNetPortSessLimitMax OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Upward boundary of the range in which lnPortSessLimit may vary." ::= {lnNetPortEntry 8} lnNetPortSessLimitMin OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Lower boundary of the range in which lnPortSessLimit may vary." ::= {lnNetPortEntry 9} lnNetPortSessPeak OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The peak number of concurrent sessions on this port." ::= {lnNetPortEntry 10} lnNetPortSessRecycled OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of dropped sessions due to low network resources." ::= {lnNetPortEntry 11} lnNetPortSessRecycling OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of sessions currently being dropped due to low network resources." ::= {lnNetPortEntry 12} lnSNARemoteLU OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Remote LU." ::= {lnNetPortEntry 13} lnSNALocalLU OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Local LU." ::= {lnNetPortEntry 14} lnSNALNCVersion OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "SNA LNC Version." ::= {lnNetPortEntry 15} lnSNAVersion OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "SNA Version." ::= {lnNetPortEntry 16} lnSNAMaxSessions OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum number of SNA sessions that can exist." ::= {lnNetPortEntry 17} lnSNAActiveSessions OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of active SNA sessions." ::= {lnNetPortEntry 18} lnSNATPType OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "SNA transaction program type." ::= {lnNetPortEntry 19} lnSNATPState OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "SNA transaction program state." ::= {lnNetPortEntry 20} lnSNAConversationId OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "SNA conversation ID." ::= {lnNetPortEntry 21} lnSNAMaxSendRUSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum send request unit size sent." ::= {lnNetPortEntry 22} lnSNAMaxRcvRUSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum send request unit size received." ::= {lnNetPortEntry 23} lnSNASendPacingSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The maximum number of outstanding request units which can be transmitted before receiving a pacing response from the remote LU." ::= {lnNetPortEntry 24} lnSNARcvPacingSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The maximum number of oustanding request units which can be received before transmitting a pacing response to the remote LU." ::= {lnNetPortEntry 25} lnSNAPacingType OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The SNA pacing size was originally determined at the creation of a session and remained constant through the life of the session. More recent implementations allow the pacing size to dynamically change through the life of the session to increase efficiency and take advantage of available buffers. This number represents the type of pacing done." ::= {lnNetPortEntry 26} lnX25LocalResets OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of local resets on this X25 port." ::= {lnNetPortEntry 27} lnX25RemoteResets OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of remote resets on this X25 port." ::= {lnNetPortEntry 28} lnX25WindowSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The window size on this X25 port." ::= {lnNetPortEntry 29} lnX25FrameSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The network frame size on this X25 port." ::= {lnNetPortEntry 30} lnX25PktSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The network packet size on this X25 port." ::= {lnNetPortEntry 31} lnX25UnderRuns OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "This occurs when data is not given to the UART on an X.25 board fast enough for it to generate a complete packet on the wire." ::= {lnNetPortEntry 32} lnX25OverRuns OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "This occurs when data is given to the UART on an X.25 board faster than the board can generate packets to put on the wire." ::= {lnNetPortEntry 33} lnX25REJTran OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of REJs transmitted by this X25 port." ::= {lnNetPortEntry 34} lnX25REJRcv OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of REJs received by this X25 port." ::= {lnNetPortEntry 35} lnX25VCCfg OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of virtual circuits configured on this X25 port." ::= {lnNetPortEntry 36} lnX25VCInUse OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of virtual circuits currently in use on this X25 port." ::= {lnNetPortEntry 37} lnX25CRCErrors OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The remote DTE address on this X25 port." ::= {lnNetPortEntry 38} lnX25LocalDTEAddress OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The local DTE address on this X25 port." ::= {lnNetPortEntry 39} -- ****************************************************************** -- LNDISK GROUP -- ****************************************************************** lnDiskFixed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Number of fixed disks configured on this server." ::= { lnDisk 1 } lnDiskFreeSwap OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Amount of free space left in swap area (in kilobytes)." ::= { lnDisk 2 } lnDriveTable OBJECT-TYPE SYNTAX SEQUENCE OF LnDriveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing one entry for each disk (including network disks) configured on the server." ::= { lnDisk 3 } lnDiskRemote OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of network disks or volumes mounted." ::= { lnDisk 4 } lnDriveEntry OBJECT-TYPE SYNTAX LnDriveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnDriveTable." INDEX { lnDriveIndex } ::= { lnDriveTable 1 } LnDriveEntry ::= SEQUENCE { lnDriveIndex INTEGER, lnDriveLetter DisplayString, lnDriveSize INTEGER, lnDriveFree INTEGER } lnDriveIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each entry in lnDriveTable." ::= { lnDriveEntry 1 } lnDriveLetter OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The drive letter of the disk associated with this entry." ::= { lnDriveEntry 2 } lnDriveSize OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The total size of this drive in kilobytes. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDriveEntry 3 } lnDriveFree OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The amount of free space left on this drive in kilobytes. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDriveEntry 4 } -- ****************************************************************** -- LNMEM GROUP -- ****************************************************************** lnMemAllocTotal OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total memory allocated (should be sum of process and shared)." ::= { lnMem 1 } lnMemAllocProcess OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total process-private memory allocated by all currently-running processes." ::= { lnMem 2 } lnMemAllocShared OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total shared memory allocated." ::= { lnMem 3 } lnMemAvailability OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Available memory on this server." ::= { lnMem 4 } lnMemFree OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total free memory, reported in kilobytes, as shown in the MEM.FREE Notes statistic. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnMem 5 } lnMemSwapSize OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Size of swap file (NOTE: this stat relies on the NOTES.INI variable 'SWAPPATH' if config.sys contains a swap path different from the default.)" ::= { lnMem 6 } lnMemPhysicalRAM OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total amount of physical memory on the server." ::= { lnMem 7 } -- ****************************************************************** -- LNDATABASE GROUP -- ****************************************************************** lnDBBufferControlPoolSize OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Size of the buffer control pool." ::= { lnDatabase 1 } lnDBBufferControlPoolUsed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of bytes used in buffer control pool. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDatabase 2 } lnDBBufferPoolAllocated OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of bytes allocated from the buffer pool." ::= { lnDatabase 3 } lnDBBufferPoolMaximum OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Maximum size of the buffer pool." ::= { lnDatabase 4 } lnDBBufferPoolUsed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of used buffers from the buffer pool." ::= { lnDatabase 5 } lnDBNSFPoolSize OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Size of NSF pool." ::= { lnDatabase 6 } lnDBNSFPoolUsed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Amount of space used in NSF pool. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDatabase 7 } lnDBBufferPoolPercentReadsInBuffer OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Percentage of buffer pool reads." ::= { lnDatabase 8 } lnDBBufferPoolReads OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of database buffer pool reads." ::= { lnDatabase 9 } lnDBBufferPoolWrites OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of database buffer pool writes." ::= { lnDatabase 10 } lnDBNIFPoolSize OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Size of database NIF pool." ::= { lnDatabase 11 } lnDBNIFPoolUsed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Number of database NIF pools. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDatabase 12 } lnDBNIFPoolPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The peak number of database NIF pools. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDatabase 13 } lnDBNSFPoolPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The peak number of database NSF pools. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDatabase 14 } lnDBCacheCurrentEntries OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of databases currently in the cache. Administrators should monitor this number to see whether it approaches the NSF-DBCACHE-MAXENTRIES setting. If it does, this indicates the cache is under pressure. If this situation occurs frequently, the administrator should increase the setting for NSF-DBCACHE-MAXENTRIES." ::= { lnDatabase 15 } lnDBCacheHighWaterMark OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The maximum number of databases in the cache during this running of the Domino server program. Note that this number may be artificially high due to startup activity, so it may be of limited use as a genuine indicator of cache performance." ::= { lnDatabase 16 } lnDBCacheHits OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times an lnDBCacheInitialDbOpen is satisfied by finding a database in the cache. A high 'hits-to-opens' ratio indicates the database cache is working effectively, since most users are opening databases in the cache without having to wait for the usual time required by an initial (non-cache) open. If the ratio is low (in other words, more users are having to wait for databases not in the cache to open), the administrator can increase the NSF-DBCACHE-MAXENTRIES settings." ::= { lnDatabase 17 } lnDBCacheInitialDbOpens OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times a user/server opened a database that was not already being used by another user/server. By comparing this number to lnDBCacheHits, administrators can gauge the effectiveness of the cache." ::= { lnDatabase 18 } lnDBCacheLookups OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of lookups performed on the cache." ::= { lnDatabase 19 } lnDBCacheMaxEntries OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of databases that the server can currently hold in its cache at once." ::= { lnDatabase 20 } lnDBCacheOvercrowdingRejections OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times a database is not placed into the cache when it is closed because lnDBCacheCurrentEntries equals or exceeds lnDBCacheMaxEntries*1.5. This number should stay low. If it begins to rise, you should increase the NSF-DbCache-Maxentries settings." ::= { lnDatabase 21 } lnDBBufferControlPoolPeak OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The peak size of buffer control pool. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= { lnDatabase 22 } -- ****************************************************************** -- LNAGENT GROUP -- ****************************************************************** lnDailyAccessDenials OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times the agent manager failed to execute a given task, probably due to ACL restrictions." ::= { lnAgentMgr 1 } lnDailyScheduledRuns OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks that the agent manager has scheduled to run during the course of the day." ::= { lnAgentMgr 2 } lnDailyTriggeredRuns OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks that the agent manager has had triggered to run by an event during the course of the day." ::= { lnAgentMgr 3 } lnDailyUnsuccessfulRuns OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks the agent manager has unsuccessfully run during the course of the day." ::= { lnAgentMgr 4 } lnDailyUsedRunTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The number of seconds used to run an agent." ::= { lnAgentMgr 5 } lnHourlyAccessDenials OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks that the agent manager failed to execute during the last hour, probably due to ACL restrictions." ::= { lnAgentMgr 6 } lnHourlyScheduledRuns OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks the agent manager has scheduled to run during the last hour." ::= { lnAgentMgr 7 } lnHourlyTriggeredRuns OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks the agent manager has had triggered to run by an event during the last hour." ::= { lnAgentMgr 8 } lnHourlyUnsuccessfulRuns OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of tasks the agent manager has unsuccessfully run during the last hour." ::= { lnAgentMgr 9 } lnHourlyUsedRunTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The number of seconds to run an agent." ::= { lnAgentMgr 10 } -- ****************************************************************** -- lnMTA GROUP -- ****************************************************************** lnMTATable OBJECT-TYPE SYNTAX SEQUENCE OF LnMTAEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing one entry for each running Notes server MTA." ::= { lnMTA 1 } lnMTAEntry OBJECT-TYPE SYNTAX LnMTAEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnMTATable." INDEX { lnMTAIndex } ::= { lnMTATable 1 } LnMTAEntry ::= SEQUENCE { lnMTAIndex INTEGER, lnMTAName DisplayString, lnMTADeadMsgs INTEGER, lnMTAWaitingRecp INTEGER, lnMTAWaitingMsgs INTEGER, lnMTATransferFailures INTEGER, lnMTATotalKBTransferred INTEGER, lnMTATransferredMsgs INTEGER, lnMTATotalRouted INTEGER } lnMTAIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each MTA running on the Notes server." ::= { lnMTAEntry 1 } lnMTAName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string representing the name of a MTA running on the Notes server." ::= { lnMTAEntry 2 } lnMTADeadMsgs OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of dead mail messages. (Messages that are stuck in the MTA queue.)" ::= { lnMTAEntry 3 } lnMTAWaitingRecp OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of recipients for pending mail. (The number of recipients responsible for lnMTAWaitingMsgs.)" ::= { lnMTAEntry 4 } lnMTAWaitingMsgs OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The amount of mail awaiting routing. (The number of messages that are in the process of being routed.)" ::= { lnMTAEntry 5 } lnMTATransferFailures OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of messages the MTA could not transfer." ::= { lnMTAEntry 6 } lnMTATotalKBTransferred OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of kilobyte transferred outbound or into any of the .box's by this MTA." ::= { lnMTAEntry 7 } lnMTATransferredMsgs OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of messages transferred outbound or into any of the .box's by this MTA." ::= { lnMTAEntry 8 } lnMTATotalRouted OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total amount of mail routed (# of recipients routed to) outbound or into any of the .box's." ::= { lnMTAEntry 9 } -- ****************************************************************** -- lnWeb GROUP -- ****************************************************************** lnWebAccessFtp OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of FTP connections on this Web server." ::= { lnWeb 1} lnWebAccessGopher OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of Gopher connections on this Web server." ::= { lnWeb 2} lnWebAccessHttp OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of HTTP connections on this Web server." ::= { lnWeb 3} lnWebKBytesReceived OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "Total kilobytes received by this Web server." ::= { lnWeb 4} lnWebKBytesSent OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "Total kilobytes sent by this Web server." ::= { lnWeb 5} lnWebImageCacheHits OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of successful hits on the image cache." ::= { lnWeb 6} lnWebImageCacheMisses OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of image cache misses." ::= { lnWeb 7} lnWebLogMessages OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " 'Yes' if message logging is turned on." ::= { lnWeb 8} lnWebActiveProcesses OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of active Web Retriever processes." ::= { lnWeb 9} lnWebBusyProcesses OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of Web Retriever processes currently busy working." ::= { lnWeb 10} lnWebIdleProcesses OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of Web Retriever processes that are sitting idle." ::= { lnWeb 11} lnWebMaxProcesses OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The maximum number of Web Retriever processes allowable on this server." ::= { lnWeb 12} lnWebProcessState OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The number of image cache misses." ::= { lnWeb 13} lnWebTimeCurrent OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The current time, as set on this Web Retriever." ::= { lnWeb 14} lnWebTimeDuration OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Shows the amount of time this Web Retriever has been running." ::= { lnWeb 15} lnWebTimeStart OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The time the Web Retriever processes started." ::= { lnWeb 16} lnWebUrlFail OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number URL requests that have failed on this Web Retriever." ::= { lnWeb 17} lnWebUrlRequested OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of URL requests on this Web Retriever." ::= { lnWeb 18} lnWebUrlSucceeded OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of URL requests successfully completed on this server." ::= { lnWeb 19} lnWebRetrieverVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The version of the Web Retriever software that is running." ::= { lnWeb 20} lnWebVpoolMaxBuf OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of buffer VPOOLs which have reached maximum size." ::= { lnWeb 21} lnWebVpoolMaxElement OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of element VPOOLs which have reached maximum size." ::= { lnWeb 22} lnWebVpoolMaxMarker OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of marker VPOOLs which have reached maximum size." ::= { lnWeb 23} lnWebVpoolMaxText OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of text VPOOLs which have reached maximum size." ::= { lnWeb 24} lnWebVpoolMaxUrl OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of URL VPOOLs which have reached maximum size." ::= { lnWeb 25} lnWebProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF LnWebProcEntry ACCESS not-accessible STATUS optional DESCRIPTION "This table will show statistics for all Web Retriever processes on the server." ::= { lnWeb 26} lnWebProcEntry OBJECT-TYPE SYNTAX LnWebProcEntry ACCESS not-accessible STATUS optional DESCRIPTION "This defines the MIB variables specific to each Web Retriever process." INDEX { lnWebProcIndex } ::= { lnWebProcessTable 1 } LnWebProcEntry ::= SEQUENCE { lnWebProcIndex INTEGER, lnWebProcNumber DisplayString, lnWebProcAccFtp INTEGER, lnWebProcAccGopher INTEGER, lnWebProcAccHttp INTEGER, lnWebProcKBytesRec INTEGER, lnWebProcKBytesSent INTEGER, lnWebProcCacheHits INTEGER, lnWebProcCacheMisses INTEGER, lnWebProcPid INTEGER, lnWebProcUrlFail INTEGER, lnWebProcUrlReq INTEGER, lnWebProcUrlSucc INTEGER, lnWebProcVpoolCurBuf INTEGER, lnWebProcVpoolCurElement INTEGER, lnWebProcVpoolCurMarker INTEGER, lnWebProcVpoolCurText INTEGER, lnWebProcVpoolCurUrl INTEGER, lnWebProcVpoolMaxBuf INTEGER, lnWebProcVpoolMaxElement INTEGER, lnWebProcVpoolMaxMarker INTEGER, lnWebProcVpoolMaxText INTEGER, lnWebProcVpoolMaxUrl INTEGER } lnWebProcIndex OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index entry for each Web Retriever process." ::= { lnWebProcEntry 1} lnWebProcNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The number associated with the Web Retriever process in the Notes stats structure." ::= { lnWebProcEntry 2} lnWebProcAccFtp OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of FTP connections this Web Retriever process is handling." ::= { lnWebProcEntry 3} lnWebProcAccGopher OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of Gopher connections this Web Retriever process is handling." ::= { lnWebProcEntry 4} lnWebProcAccHttp OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of HTTP connections this Web Retriever process is handling." ::= { lnWebProcEntry 5} lnWebProcKBytesRec OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of kilobytes this Web Retriever process has received." ::= { lnWebProcEntry 6} lnWebProcKBytesSent OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of kilobytes this Web Retriever process has sent." ::= { lnWebProcEntry 7} lnWebProcCacheHits OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful image cache hits for this Web Retriever." ::= { lnWebProcEntry 8} lnWebProcCacheMisses OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of image cache misses for this Web Retriever." ::= { lnWebProcEntry 9} lnWebProcPid OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The process ID associated with this Web Retriever process." ::= { lnWebProcEntry 10} lnWebProcUrlFail OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of URL opens that failed for this Web Retriever process." ::= { lnWebProcEntry 11} lnWebProcUrlReq OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of URL open requests this Web Retriever process handled." ::= { lnWebProcEntry 12} lnWebProcUrlSucc OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of successful URL opens this Web Retriever process handled." ::= { lnWebProcEntry 13} lnWebProcVpoolCurBuf OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of buffer VPOOLs currently allocated for this Web Retriever process." ::= { lnWebProcEntry 14} lnWebProcVpoolCurElement OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of element VPOOLs currently allocated for this Web Retriever process." ::= { lnWebProcEntry 15} lnWebProcVpoolCurMarker OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of marker VPOOLs currently allocated for this Web Retriever process." ::= { lnWebProcEntry 16} lnWebProcVpoolCurText OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of text VPOOLs currently allocated for this Web Retriever process." ::= { lnWebProcEntry 17} lnWebProcVpoolCurUrl OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of URL VPOOLs currently allocated for this Web Retriever process." ::= { lnWebProcEntry 18} lnWebProcVpoolMaxBuf OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of buffer VPOOLs allocated for this Web Retriever process that have reached their maximum size." ::= { lnWebProcEntry 19} lnWebProcVpoolMaxElement OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of element VPOOLs allocated to this Web Retriever process that have reached their maximum size." ::= { lnWebProcEntry 20} lnWebProcVpoolMaxMarker OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of VPOOLs allocated to this Web Retriever process that have reached their maximum size." ::= { lnWebProcEntry 21} lnWebProcVpoolMaxText OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of text VPOOLs allocated to this Web Retriever process that have reached their maximum size." ::= { lnWebProcEntry 22} lnWebProcVpoolMaxUrl OBJECT-TYPE SYNTAX INTEGER (0..429496795) ACCESS read-only STATUS mandatory DESCRIPTION "The number of URL VPOOLs allocated to this Web Retriever process that have reached their maximum size." ::= { lnWebProcEntry 23} -- ****************************************************************** -- LNOBJECT GROUP (SCOS stats) -- ****************************************************************** lnObjectFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The name of the primary single-copy object store (SCOS) database currently in use." ::= { lnObject 1} lnObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF LnObjectEntry ACCESS not-accessible STATUS optional DESCRIPTION "This table describes statistics for the single-copy object store of each SCOS database that is currently being accessed." ::= { lnObject 2} lnObjectEntry OBJECT-TYPE SYNTAX LnObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "All items in LnObjectTable." ::= { lnObjectTable 1 } LnObjectEntry ::= SEQUENCE { lnObjectIndex INTEGER, lnObjectName DisplayString, lnObjectSharedBy01 INTEGER, lnObjectSharedBy02 INTEGER, lnObjectSharedBy03 INTEGER, lnObjectSharedBy04 INTEGER, lnObjectSharedBy05 INTEGER, lnObjectSharedBy06 INTEGER, lnObjectSharedBy07 INTEGER, lnObjectSharedBy08 INTEGER, lnObjectSharedBy09 INTEGER, lnObjectSharedBy10 INTEGER, lnObjectSharedBy11 INTEGER, lnObjectSharedBy12 INTEGER, lnObjectSharedBy13 INTEGER, lnObjectSharedBy14 INTEGER, lnObjectSharedBy15 INTEGER, lnObjectSharedBy16 INTEGER, lnObjectSharedBy17 INTEGER, lnObjectSharedBy18 INTEGER, lnObjectSharedBy19 INTEGER, lnObjectSharedBy20 INTEGER, lnObjectSharedByGreater INTEGER, lnObjectSharedByTotal INTEGER } lnObjectIndex OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "An internal index for each SCOS database in use." ::= {lnObjectEntry 1} lnObjectName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The name of the single copy object store database." ::= {lnObjectEntry 2} lnObjectSharedBy01 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 1 pointer." ::= {lnObjectEntry 3} lnObjectSharedBy02 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 2 pointers." ::= {lnObjectEntry 4} lnObjectSharedBy03 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 3 pointers." ::= {lnObjectEntry 5} lnObjectSharedBy04 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 4 pointers." ::= {lnObjectEntry 6} lnObjectSharedBy05 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 5 pointers." ::= {lnObjectEntry 7} lnObjectSharedBy06 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 6 pointers." ::= {lnObjectEntry 8} lnObjectSharedBy07 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 7 pointers." ::= {lnObjectEntry 9} lnObjectSharedBy08 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 8 pointers." ::= {lnObjectEntry 10} lnObjectSharedBy09 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 9 pointers." ::= {lnObjectEntry 11} lnObjectSharedBy10 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 10 pointers." ::= {lnObjectEntry 12} lnObjectSharedBy11 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 11 pointers." ::= {lnObjectEntry 13} lnObjectSharedBy12 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 12 pointers." ::= {lnObjectEntry 14} lnObjectSharedBy13 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 13 pointers." ::= {lnObjectEntry 15} lnObjectSharedBy14 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 14 pointers." ::= {lnObjectEntry 16} lnObjectSharedBy15 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 15 pointers." ::= {lnObjectEntry 17} lnObjectSharedBy16 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 16 pointers." ::= {lnObjectEntry 18} lnObjectSharedBy17 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 17 pointers." ::= {lnObjectEntry 19} lnObjectSharedBy18 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 18 pointers." ::= {lnObjectEntry 20} lnObjectSharedBy19 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 19 pointers." ::= {lnObjectEntry 21} lnObjectSharedBy20 OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with 20 pointers." ::= {lnObjectEntry 22} lnObjectSharedByGreater OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Messages with more than 20 pointers." ::= {lnObjectEntry 23} lnObjectSharedByTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of shared messages." ::= {lnObjectEntry 24} -- ****************************************************************** -- LNDOMINO GROUP -- ****************************************************************** lnDominoInfo OBJECT IDENTIFIER ::= {lnDomino 1} lnDominoCmdInfo OBJECT IDENTIFIER ::= {lnDomino 2} lnDominoConfig OBJECT IDENTIFIER ::= {lnDomino 3} -- ****************************************************************** -- LNDOMINOINFO GROUP -- ****************************************************************** lnDominoBuildName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The name given to the build." ::= {lnDominoInfo 1} lnDominoBuildNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The build number given to the build." ::= {lnDominoInfo 2} lnDominoBuildPlatform OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The platform this build was created on." ::= {lnDominoInfo 3} lnDominoBuildVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The version string associated with this build." ::= {lnDominoInfo 4} lnDominoThreadsActivePeak OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The peak number of active threads since the Domino server was started." ::= {lnDominoInfo 5} lnDominoThreadsTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of available threads to service Domino requests." ::= {lnDominoInfo 6} lnDominoThreadsPeakTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total peak number of active threads since the Domino server was started." ::= {lnDominoInfo 7} lnDominoThreadsPeakTime OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The time when the peak number of threads to service Domino requests occured, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= {lnDominoInfo 8} lnDominoStartTime OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The time and date the Domino server was started, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= {lnDominoInfo 9} lnDominoReqPerMinTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of Domino requests in the last minute. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnDominoInfo 10} lnDominoReqPerMinPeak OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The highest number of Domino requests to occur during a one minute interval." ::= {lnDominoInfo 11} lnDominoReqPerMinPeakTime OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The time that the peak number of Domino requests occured during a one minute interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= {lnDominoInfo 12} lnDominoReqPer5MinsTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of Domino requests in the last five minutes. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnDominoInfo 13} lnDominoReqPer5MinsPeak OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The highest number of Domino requests to occur during a five minute interval." ::= {lnDominoInfo 14} lnDominoReqPer5MinsPeakTime OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The time that the peak number of Domino requets occured during a five minute interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= {lnDominoInfo 15} lnDominoReqPerHourTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of Domino requetss in the last hour. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnDominoInfo 16} lnDominoReqPerHourPeak OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The highest number of Domino requests to occur during a 1 hour interval." ::= {lnDominoInfo 17} lnDominoReqPerHourPeakTime OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The time that the peak number of Domino requests occured during a one hour interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= {lnDominoInfo 18} lnDominoReqPerDayTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of Domino requestes in the last day. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnDominoInfo 19} lnDominoReqPerDayPeak OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The highest number of Domino requests to occur during a one day interval." ::= {lnDominoInfo 20} lnDominoReqPerDayPeakTime OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The time that the peak number of Domino requests occured during a one day interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= {lnDominoInfo 21} lnDominoRequestsTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of Domino requests since the Domino server was started. A value of zero may indicate the statistic's value is too large to be passed via SNMP." ::= {lnDominoInfo 22} lnDominoCacheCommandDisplaceRate OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Command cache displace rate." ::= {lnDominoInfo 23} lnDominoCacheCommandHitRate OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Domino command cache hit rate." ::= {lnDominoInfo 24} lnDominoCacheDatabaseDisplaceRate OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Domino database cache displace rate." ::= {lnDominoInfo 25} lnDominoCacheDatabaseHitRate OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "Domino database cache hit rate." ::= {lnDominoInfo 26} -- ****************************************************************** -- lnDominoCmdInfo GROUP -- ****************************************************************** lnDominoCmdInfoEditDocument OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of EditDocument commands requested since the Domino server was started." ::= {lnDominoCmdInfo 1} lnDominoCmdInfoOpenServer OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenServer commands requested since the Domino server was started." ::= {lnDominoCmdInfo 2} lnDominoCmdInfoOpenDatabase OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenDatabase commands requested since the Domino server was started." ::= {lnDominoCmdInfo 3} lnDominoCmdInfoOpenView OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenView commands requested since the Domino server was started." ::= {lnDominoCmdInfo 4} lnDominoCmdInfoOpenDocument OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenDocument commands requested since the Domino server was started." ::= {lnDominoCmdInfo 5} lnDominoCmdInfoOpenElement OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenElement commands requested since the Domino server was started." ::= {lnDominoCmdInfo 6} lnDominoCmdInfoOpenIcon OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenIcon commands requested since the Domino server was started." ::= {lnDominoCmdInfo 7} lnDominoCmdInfoOpenForm OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenForm commands requested since the Domino server was started." ::= {lnDominoCmdInfo 8} lnDominoCmdInfoOpenAgent OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenAgent commands requested since the Domino server was started." ::= {lnDominoCmdInfo 9} lnDominoCmdInfoOpenNavigator OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenNavigator commands requested since the Domino server was started." ::= {lnDominoCmdInfo 10} lnDominoCmdInfoOpenAbout OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenAbout commands requested since the Domino server was started." ::= {lnDominoCmdInfo 11} lnDominoCmdInfoOpenHelp OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of OpenHelp commands requested since the Domino server was started." ::= {lnDominoCmdInfo 12} lnDominoCmdInfoCreateDocument OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of CreateDocument commands requested since the Domino server was started." ::= {lnDominoCmdInfo 13} lnDominoCmdInfoSaveDocument OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of SaveDocument commands requested since the Domino server was started." ::= {lnDominoCmdInfo 14} lnDominoCmdInfoDeleteDocument OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of DeleteDocument commands requested since the Domino server was started." ::= {lnDominoCmdInfo 15} lnDominoCmdInfoSearchSite OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of SearchSite commands requested since the Domino server was started." ::= {lnDominoCmdInfo 16} lnDominoCmdInfoSearchView OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of SearchView commands requested since the Domino server was started." ::= {lnDominoCmdInfo 17} lnDominoCmdInfoUnknown OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of unrecognized Domino commands." ::= {lnDominoCmdInfo 18} lnDominoCmdInfoLogin OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of Login commands requested since the Domino server was started." ::= {lnDominoCmdInfo 19} lnDominoCmdInfoNavigate OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of Navigate commands requested since the Domino server was started." ::= {lnDominoCmdInfo 20} lnDominoCmdInfoReadForm OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of Read Form commands requested since the Domino server was started." ::= {lnDominoCmdInfo 21} lnDominoCmdInfoTotal OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of commands performed since the Domino server was started." ::= {lnDominoCmdInfo 22} -- ****************************************************************** -- LNDOMINOCONFIG GROUP -- ****************************************************************** lnDominoCfgPortNumber OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The TCP/IP port number from the server record." ::= {lnDominoConfig 1} lnDominoCfgPortStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS optional DESCRIPTION "The TCP/IP port status (enabled or disabled)." ::= {lnDominoConfig 2} lnDominoCfgHostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The HostName of the Domino server." ::= {lnDominoConfig 3} lnDominoCfgDNSLookup OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS optional DESCRIPTION "The status of DNS lookup (enabled or disabled)." ::= {lnDominoConfig 4} lnDominoCfgHomeURL OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The URL that requests are directed to if only the server name is specified." ::= {lnDominoConfig 5} lnDominoCfgWelcomePage OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The page name to direct to if no explicit page name is specified in the URL." ::= {lnDominoConfig 6} lnDominoCfgActiveThreadsMax OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The maximum number of active threads servicing HTTP requests." ::= {lnDominoConfig 7} lnDominoCfgActiveThreadsMin OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The minimum number of active threads servicing HTTP requests." ::= {lnDominoConfig 8} lnDominoCfgSSLPortNumber OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The TCP/IP port number for HTTP requests using SLL." ::= {lnDominoConfig 9} lnDominoCfgSSLStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS optional DESCRIPTION "The SSL status (enabled or disabled)." ::= {lnDominoConfig 10} lnDominoCfgSSLKeyFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The file name for SSL keys." ::= {lnDominoConfig 11} lnDominoCfgCacheDirectory OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The directory for the Domino cache." ::= {lnDominoConfig 12} lnDominoCfgCacheSizeMax OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The maximum size of the Domino cache in MB." ::= {lnDominoConfig 13} lnDominoCfgCacheDelete OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS optional DESCRIPTION "Delete Domino cache on shutdown (enabled or disabled)." ::= {lnDominoConfig 14} lnDominoCfgGarbageCollectionStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS optional DESCRIPTION "Status of garbage collection (enabled or disabled)." ::= {lnDominoConfig 15} lnDominoCfgGarbageCollectionInterval OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The interval between garbage collections in minutes." ::= {lnDominoConfig 16} lnDominoCfgImageFormat OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Graphics conversion image format." ::= {lnDominoConfig 17} lnDominoCfgImageInterlaced OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS optional DESCRIPTION "Graphics interlacing (enabled or disabled)." ::= {lnDominoConfig 18} lnDominoCfgViewLines OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The number of lines per view segment." ::= {lnDominoConfig 19} lnDominoCfgDirectoryHTML OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The location of the HTML directory setting." ::= {lnDominoConfig 20} lnDominoCfgDirectoryURLPathCGI OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The CGI URL path." ::= {lnDominoConfig 21} lnDominoCfgDirectoryCGI OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The location of the CGI directory setting." ::= {lnDominoConfig 22} lnDominoCfgDirectoryURLPathIcons OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The Domino icons URL path." ::= {lnDominoConfig 23} lnDominoCfgDirectoryIcons OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The location of the Domino icons directory setting." ::= {lnDominoConfig 24} lnDominoCfgLogAccess OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The filename for Domino access logs." ::= {lnDominoConfig 25} lnDominoCfgLogError OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The filename for Domino error logs." ::= {lnDominoConfig 26} lnDominoCfgLogTimeStamp OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The Domino timestamp format." ::= {lnDominoConfig 27} lnDominoCfgLogFilter OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The Domino log filter setting." ::= {lnDominoConfig 28} lnDominoCfgTimeoutIdleThread OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The interval (in minutes) before idle threads timeout." ::= {lnDominoConfig 29} lnDominoCfgTimeoutInput OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The interval (in minutes) before timeout expires while waiting for input." ::= {lnDominoConfig 30} lnDominoCfgTimeoutOutput OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The interval (in minutes) before timeout expires while waiting for output." ::= {lnDominoConfig 31} lnDominoCfgTimeoutCGI OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The interval (in minutes) before CGI timeout expires while waiting for input." ::= {lnDominoConfig 32} -- ****************************************************************** -- Here are the statistics for the Calendaring and Scheduling package -- ****************************************************************** lnCalTotalAllApptsResources OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of scheduled appointment and resource reservations." ::= {lnCalendar 1} lnCalTotalAllUsersResources OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of resources that have been reserved, plus the number of users with scheduled appointments." ::= {lnCalendar 2} lnCalTotalAppointments OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of scheduled appointments." ::= {lnCalendar 3} lnCalTotalReservations OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of reservations for resources." ::= {lnCalendar 4} lnCalTotalResources OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of resources that have been reserved." ::= {lnCalendar 5} lnCalTotalUsers OBJECT-TYPE SYNTAX INTEGER (1..429496795) ACCESS read-only STATUS optional DESCRIPTION "The total number of users that have scheduled appointments." ::= {lnCalendar 6} -- ****************************************************************** -- LNCOLLECTOR GROUP -- ****************************************************************** lnCollectorTimeCollected OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Time and date at which the statistics collector task last collected statistics; represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)." ::= { lnCollector 1 } lnCollectorTimeElapsed OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The time that has elapsed since the statistics collector task was started." ::= { lnCollector 2 } -- ****************************************************************** -- LNINFO SCALAR OBJECTS -- ****************************************************************** lnMIBVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Domino SNMP support level (MIB Version)." ::= { lnInfo 3 } lnQSBuildNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The build number of the Query/Set Notes add-in task." ::= {lnInfo 5} -- ****************************************************************** -- lNCLUSTER GROUP -- ****************************************************************** lnClusterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The name of the cluster this server is a member of." ::= { lnCluster 1 } lnClusterAvailIndex OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS optional DESCRIPTION "The current percentage or an index of the current server's availability. A value of 0 indicates that the server has virtually no available resources. A value of 100 indicates that the server is completely available." ::= { lnCluster 2 } lnClusterAvailThreshold OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The current setting of this server's availability threshold. The value is compared against lnClusterAvailIndex. BUSY - The availability index has dropped below the threshold." ::= { lnCluster 3 } lnClusterPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Default PortName being used for intra cluster network traffic. There is no default port. Any available and active port may be used for intra cluster traffic." ::= { lnCluster 4 } lnClusterProbeCount OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The total number of times this cluster member has completed a probe request for another cluster member." ::= { lnCluster 5 } lnClusterProbeTimeout OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "In Minutes. The interval between intra cluster probes or cluster member heartbeats." ::= { lnCluster 6 } lnClusterTable OBJECT-TYPE SYNTAX SEQUENCE OF LnClusterEntry ACCESS read-only STATUS optional DESCRIPTION "A table containing one entry for each configured Notes server cluster member known by this server." ::= { lnCluster 7 } lnClusterProbeError OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times a server received an error while probing another server." ::= { lnCluster 11 } lnClusterEntry OBJECT-TYPE SYNTAX LnClusterEntry ACCESS read-only STATUS optional DESCRIPTION "The entry type definition for the lnClusterTable." INDEX { lnClusterTableIndex } ::= { lnClusterTable 1 } LnClusterEntry ::= SEQUENCE { lnClusterTableIndex INTEGER, lnClusterMemberName DisplayString, lnClusterMemberIndex DisplayString } lnClusterTableIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS optional DESCRIPTION "A unique value for each entry in the lnClusterTable." ::= { lnClusterEntry 1 } lnClusterMemberName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Name of Notes Cluster Member." ::= { lnClusterEntry 2 } lnClusterMemberIndex OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The last known load information for a cluster member." ::= { lnClusterEntry 3 } -- ****************************************************************** -- LNOPENREDIRECTS GROUP -- ****************************************************************** lnClusterFailoverByPathSucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was successfully able to redirect a client to another cluster member after the client was unable to open a database by pathname on a cluster member." ::= { lnOpenRedirects 1 } lnClusterFailoverByPathUnsucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was unsuccessful at redirecting a client to another cluster member after the client was unable to open a database by pathname for a cluster member." ::= { lnOpenRedirects 2 } lnClusterFailoverSucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was successfully able to redirect a client to another cluster member after the client was unable to open a database by replica ID on a cluster member." ::= { lnOpenRedirects 3 } lnClusterFailoverUnsucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was unsuccessful at redirecting a client to another cluster member after the client was unable to open a database by replica ID on a cluster member." ::= { lnOpenRedirects 4 } lnClusterLoadBalByPathSucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was successfully able to redirect a client to another cluster member after the client attempted to open a database by pathname on a cluster member that was BUSY." ::= { lnOpenRedirects 5 } lnClusterLoadBalByPathUnsucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was unsuccessful at redirecting a client to another cluster member after the client attempted to open a database by pathname on a cluster member that was BUSY." ::= { lnOpenRedirects 6 } lnClusterLoadBalSucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was successfully able to redirect a client to another cluster member after the client attempted to open a database by replica ID on a cluster member that was BUSY." ::= { lnOpenRedirects 7 } lnClusterLoadBalUnsucc OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times this server was unsuccessful at redirecting a client to another cluster member after the client attempted to open a database by replica ID on a cluster member that was BUSY." ::= { lnOpenRedirects 8 } -- ****************************************************************** -- lnOpenRequest GROUP -- ****************************************************************** lnClusterOpenReqClustBusy OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times that a client attempted to open a database on this cluster member when it and the rest of the cluster were BUSY." ::= { lnOpenRequest 1 } lnClusterOpenReqDBOutofServ OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times a client attempted to open a database that has been marked as out of service on this cluster member." ::= { lnOpenRequest 2 } lnClusterOpenReqLoadBalanced OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The number of times a client attempted to open a database on this cluster member when the cluster member was BUSY." ::= { lnOpenRequest 3 } -- ****************************************************************** -- LNCLUSTERTRANS GROUP -- ****************************************************************** lnClusterTransIntAvgTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Average transaction time (in milliseconds) for this member of the cluster. Based on transaction data captured over a number of recent intervals of time." ::= { lnClusterTrans 1 } lnClusterTransIntInSec OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Current setting for the length of the intervals. Used to capture transaction data for load balance computations." ::= { lnClusterTrans 2 } lnClusterTransIntUsedInAvg OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Current setting of the number for intervals being used to capture transaction data on load balance computations." ::= { lnClusterTrans 3 } lnClusterTransLastIntAvgTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "Average transaction time for the last interval of transaction data captured on this cluster member." ::= { lnClusterTrans 4 } lnClusterTransNormValue OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS optional DESCRIPTION "The current setting for the acceptable average transaction time (in milliseconds) on this cluster member." ::= { lnClusterTrans 5 } -- ****************************************************************** -- LNCONTROL GROUP -- ****************************************************************** lnNotesServerSetState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to 'down' to shut Notes server down, set to 'up' to restart Notes server. Note: access to this feature is controlled through external (non-SNMP) security measures." ::= { lnControl 1 } lnNotesServerState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), not-responding(3), crashed(4), unknown(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Equals 'down' if the Notes server is down, equals 'up' if the Notes server is running." ::= { lnControl 2 } lnLastTrapSeq OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Sequence number of last trap sent. Same as the index number that trap in the lnRecentTrapsTable." ::= { lnControl 3 } lnRecentTrapsTable OBJECT-TYPE SYNTAX SEQUENCE OF LnRecentTrapsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing the last 10 generated traps." ::= { lnControl 4 } lnRecentTrapsEntry OBJECT-TYPE SYNTAX LnRecentTrapsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry type definition for the lnRecentTrapsTable." INDEX { lnTrapSeq } ::= { lnRecentTrapsTable 1 } LnRecentTrapsEntry ::= SEQUENCE { lnTrapSeq INTEGER, lnTrapInfo DisplayString } lnTrapSeq OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each trap record in the sequence of entries returned to the lnRecentTrapsTable." ::= { lnRecentTrapsEntry 1 } lnTrapInfo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string containing the information for a trap." ::= { lnRecentTrapsEntry 2 } lnRemoteReboot OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to 'yes' to reboot the entire system. This value will be returned as 'yes' if the system is in the process of rebooting but hasn't come down yet" ::= { lnControl 5 } lnServerTbl OBJECT-TYPE SYNTAX SEQUENCE OF LnRecentTrapsEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table containing the list of Domino Servers that have been partitioned across this machine. This must be configured by the system administrator. This table only reflects the Domino Servers that are listed in the file lnsnmp.ini since there is no way to query a given machine for a list of potentially available servers." ::= { lnControl 6 } lnTotalPartitions OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "If the file lnsnmp.ini exists, this MIB variable will represent the number of 'Server=' entries in that file. If the file lnsnmp.ini does not exist, the value of lnTotalPartitions will equal zero." ::= { lnControl 7 } lnMPAIniFileLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The directory that the file lnsnmp.ini was read from. Normally this is either the Windows-NT directory or this will be /opt/lotus for UNIX systems. However, on either platform, if the file is not found, the PATH environment variable will be searched. The first instance of lnsnmp.ini in the PATH will be opened." ::= { lnControl 8 } lnServerTblEntry OBJECT-TYPE SYNTAX LnRecentTrapsEntry ACCESS not-accessible STATUS optional DESCRIPTION "The entry type definition for the lnServerTbl." INDEX { lnServerTblIndex } ::= { lnServerTbl 1 } LnServerTblEntry ::= SEQUENCE { lnServerTblIndex INTEGER, lnServerTblName DisplayString, lnServerTblNotesPartition INTEGER, lnServerTblDataDir DisplayString, lnServerTblDataDirValid INTEGER, lnServerTblState INTEGER, lnServerIdentifiedItself INTEGER, lnServerTblSetState INTEGER } lnServerTblIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS optional DESCRIPTION "The MIB index for this row in the lnServerTbl." ::= { lnServerTblEntry 1 } lnServerTblName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The name of the server as it appears in lnsnmp.ini. However, if a server's addin task registers with the Main Proxy Agent, The addin task will update the server's name with the correct name if a match can be found." ::= { lnServerTblEntry 2 } lnServerTblNotesPartition OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS optional DESCRIPTION "The value that is entered in lnsnmp.ini. This MUST match the environment variable NOTESPARTITION for Domino Servers partitioned on Windows-NT Systems. This has no real meaning for Domino Servers on UNIX platforms." ::= { lnServerTblEntry 3 } lnServerTblDataDir OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The data directory of the given Domino server as entered in lnsnmp.ini; See lnServerTblDataDirValid for an indication on whether or not this is a valid Domino Server data directory." ::= { lnServerTblEntry 4 } lnServerTblDataDirValid OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS optional DESCRIPTION "The Main Proxy Agent validates the Domino Server data directory that is entered in lnsnmp.ini. This will be TRUE if this is a valid directory and the file notes.ini exists within that directory. It will be false otherwise." ::= { lnServerTblEntry 5} lnServerTblState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS optional DESCRIPTION "This will indicate the current state of the server. The server will be considered down until at least one of the Domino Management Agent tasks starts and registers with the Main Proxy Agent." ::= { lnServerTblEntry 6 } lnServerIdentifiedItself OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS optional DESCRIPTION "This will indicate if the server has ever run and identified itself to the Main Proxy Agent at any time during the current lifespan of the Main Proxy Agent. This may be used as an indication that a given Domino server may not be configured correctly in lnsnmp.ini. The server identification occurs when one of the Domino Management Agent addin tasks is started." ::= { lnServerTblEntry 7 } lnServerTblSetState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS optional DESCRIPTION "This will indicate the current state of the Domino server and allow remote SNMP control over stopping & starting the Domion server. The server will be considered down until at least one of the Domino management Agent addin tasks starts and registers with the Main Proxy Agent." ::= { lnServerTblEntry 8 } -- ****************************************************************** -- LNINTERCEPTOR GROUP -- ****************************************************************** lnEvtServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Originating server for this event." ::= { lnInterceptor 1 } lnEvtType OBJECT-TYPE SYNTAX INTEGER { unknown(0), communications(1), security(2), mail(3), replication(4), resource(5), miscellaneous(6), server(7), alarm(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns a value for the type of this event." ::= { lnInterceptor 2 } lnEvtSeverity OBJECT-TYPE SYNTAX INTEGER { unknown(0), fatal(1), failure(2), warning1(3), warning2(4), normal(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns a value for the severity of this event." ::= { lnInterceptor 3 } lnEvtWhen OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Returns a value for the date and time of this event." ::= { lnInterceptor 4 } lnEvtData OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Information about this event." ::= { lnInterceptor 5 } lnEvtSeq OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Sequence number of this event for internal use only. This information is not available in this MIB variable. If you wish to determine the sequence number for the last trap, please see the variable lnControl.lnRecentTrapsTable.lnRecentTrapEntry.lnTrapSeq." ::= { lnInterceptor 6 } -- ** Define the Unix specific variables. lnAlarm OBJECT IDENTIFIER ::= { lnUnix 1 } lnSignal OBJECT IDENTIFIER ::= { lnUnix 2 } -- ** Define the trap variables used in the Alarm Manager, nvalarmgrd lnAlarmServerHandle OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "This represents the server for which the alarm will be generated for." ::= {lnAlarm 1} lnAlarmTargetHandle OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "This represents the entity on the server that caused the alarm to be generated" ::= {lnAlarm 2} lnAlarmDate OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "The date the alarm occured." ::= {lnAlarm 3} lnAlarmTime OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "The time the alarm occured." ::= {lnAlarm 4} lnAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { normal(0), informational(1), disabled(2), unmanaged(3), unknown(4), marginal(5), warning(6), minor(7), major(8), critical(9) } ACCESS not-accessible STATUS optional DESCRIPTION "The severity of the alarm being generated by the SNMP trap" ::= {lnAlarm 5} lnAlarmIntArg OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS not-accessible STATUS optional DESCRIPTION "Returns a value for the integer argument associated with the Alarm." ::= {lnAlarm 6} lnAlarmLongArg OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "The long integer argument associated with the Alarm." ::= {lnAlarm 7} lnAlarmDoubleArg OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS optional DESCRIPTION "The string representation of a floating point value." ::= {lnAlarm 8} lnAlarmTextArg1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS optional DESCRIPTION "The first text argument associated with the Alarm." ::= {lnAlarm 9} lnAlarmTextArg2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS optional DESCRIPTION "The second text argument associated with the Alarm." ::= {lnAlarm 10} lnAlarmSeverityStr OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS optional DESCRIPTION "A string representation of the alarm severity. This is used in the trap that is sent to the management station to be displayed on the NetView event cards." ::= {lnAlarm 11} lnAlarmTypeStr OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS optional DESCRIPTION "A string representation of the alarm's type. This is used in the trap that is sent to the management station to be displayed on the NetView event cards." ::= {lnAlarm 12} lnAlarmMessage OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS optional DESCRIPTION "A message indicating why the alarm was raised. This is used in the trap that is sent to the management station to be displayed on the NetView event cards." ::= {lnAlarm 13} lnAlarmMessageExt OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS optional DESCRIPTION "A message extension with more detailed information explaining why the alarm was raised. This is used in the trap that is sent to the management station to be displayed on the NetView event cards." ::= {lnAlarm 14} lnAlarmServerName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS optional DESCRIPTION "The server name of the Notes server the alarm was raised against. This is used in the trap that is sent to the management station to be displayed in the NetView event cards." ::= {lnAlarm 15} --Define some variables for signals and messages lnSignalServerId OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "This variable will be embedded in the lnSignalServerConfigChg trap. This is an integer that represents the ServerId of the Notes server that caused the signal to be raised." ::= {lnSignal 1} lnSignalOldServerType OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "This variable will be embedded in the lnSignalServerConfigChg trap. This is an the integer value representing the old server class." ::= {lnSignal 2} lnSignalNewServerType OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "This variable will be embedded in the lnSignalServerConfigChg trap. This is an integer value representing the new server class." ::= {lnSignal 3} lnSignalWhatHasChanged OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS not-accessible STATUS optional DESCRIPTION "This variable will be embedded in the lnSignalServerConfigChg trap. This is an integer value indicating what has changed on the server." ::= {lnSignal 4} lnSignalServerName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS optional DESCRIPTION "The server name. This will appear in the information trap displayed in the NetView Event Cards when a specific server has had all its alarms cleared." ::= {lnSignal 5} --Define the traps lnUnknownEventTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity, lnEvtWhen, lnEvtData, lnEvtSeq } DESCRIPTION "This trap indicates that a Notes Event of Unknown severity has occurred. Configuration of which events generated traps is performed in the Public Address book." ::= 0 lnFatalEventTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity, lnEvtWhen, lnEvtData, lnEvtSeq } DESCRIPTION "This trap indicates that a Notes Event of Fatal severity has occurred. Configuration of which events generated traps is performed in the Public Address book." ::= 1 lnFailureEventTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity, lnEvtWhen, lnEvtData, lnEvtSeq } DESCRIPTION "This trap indicates that a Notes Event of Failure severity has occurred. Configuration of which events generated traps is performed in the Public Address book." ::= 2 lnWarning1EventTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity, lnEvtWhen, lnEvtData, lnEvtSeq } DESCRIPTION "This trap indicates that a Notes Event of Warning1 severity has occurred. Configuration of which events generated traps is performed in the Public Address book." ::= 3 lnWarning2EventTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity, lnEvtWhen, lnEvtData, lnEvtSeq } DESCRIPTION "This trap indicates that a Notes Event of Warning2 severity has occurred. Configuration of which events generated traps is performed in the Public Address book." ::= 4 lnNormalEventTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity, lnEvtWhen, lnEvtData, lnEvtSeq } DESCRIPTION "This trap indicates that a Notes Event of Normal severity has occurred. Configuration of which events generated traps is performed in the Public Address book." ::= 5 lnServerUpTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer } DESCRIPTION "This trap indicates that the Notes server has come up." ::= 11 lnServerDownTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer } DESCRIPTION "This trap indicates that the Notes server has gone down." ::= 12 lnServerPulseFailedTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer } DESCRIPTION "This trap indicates that the Notes server is not responding to the Lotus notes SNMP agent. The server may have crashed, or may be busy." ::= 13 lnServerPulseRestoredTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer } DESCRIPTION "This trap indicates that the Notes server is now responding to the Lotus notes SNMP agent." ::= 14 lnSystemRebootingTrap TRAP-TYPE ENTERPRISE notes DESCRIPTION "This trap indicates that the operating system the Notes server is running has recieved an SNMP reboot request. The system is now rebooting, this may take up to 5 minutes." ::= 15 lnServerNotRespondingTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer } DESCRIPTION "This trap indicates that the Notes server has not responded to the Lotus Notes SNMP agent for several minutes. There is a chance that the Notes server may have crashed." ::= 16 lnServerNowRespondingTrap TRAP-TYPE ENTERPRISE notes VARIABLES { lnEvtServer } DESCRIPTION "This trap indicates that the Notes server is now responding to the Lotus Notes SNMP agent after failing to respond for several minutes. The server may be overloaded." ::= 17 -- --"Alarm" traps generated by NotesView for AIX (or future Unix ports) -- lnAlarmStatisticThreshold TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX when an alarm statistic threshold is hit" ::= 30 lnAlarmServerStatusChange TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX when the alarm status of the server changes." ::= 31 lnAlarmPortStatusChange TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX when the alarm status of a port changes." ::= 32 lnAlarmTaskStatusChange TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX when the alarm status of a permanent task changes." ::= 33 lnAlarmNVStatClear TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX to indicate that an alarm statistic threshold condition has been cleared." ::= 34 lnAlarmAutoDiscovery TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX to indicate a discrepancy between the information that Autodiscovery has detected, and what the server has reported." ::= 35 lnAlarmServerNotesEvent TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX when a Notes server event occurs." ::= 36 lnAlarmServerCfgChangeEvent TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX if the server configuration has changed." ::= 37 lnAlarmMailProbeEvent TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX if the Mail Probe task needs to generate an alarm." ::= 38 lnAlarmNSFRemoteConsoleEvent TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX if the there is an NSF remote console event" ::= 40 lnAlarmMailBoxEvent TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX if the there is a MailBox event." ::= 41 lnAlarmServerSNMPEvent TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate, lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg, lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2} DESCRIPTION "This trap is sent by NotesView for AIX if the there is an SNMP event that generates an alarm." ::= 39 lnAlarmClearAll TRAP-TYPE ENTERPRISE notes DESCRIPTION "This trap is sent by NotesView for AIX to cause the alarm manager daemon (nvalarmgrd) to clear all alarms for all servers and connections. The status of all objects on the map will be reset to UNKNOWN." ::= 50 lnAlarmClearServers TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle } DESCRIPTION "This trap is sent by NotesView for AIX to cause the alarm manager daemon (nvalarmgrd) to clear all alarms for a given server or group of servers. The status of all the connections for each serverId specified in the PDU will also be cleared. The resulting status of all related objects on the map will be reset to UNKNOWN." ::= 51 lnSignalAutodiscoveryStart TRAP-TYPE ENTERPRISE notes DESCRIPTION "This trap is sent by the NotesView for AIX console when the Autodiscovery process starts. The NotesView Alarm Manager daemon (nvalarmgrd) will suspends all Alarm processing until the Autodiscovery process is complete." ::= 52 lnSignalAutodiscoveryFinished TRAP-TYPE ENTERPRISE notes DESCRIPTION "This trap will be used by NotesView for AIX to signal the Alarm Manager daemon (nvalarmgrd) that the Autodiscovery process has completed or stopped. Alarm processing will continue at this point, and all alarms that were received during Autodiscovery will be processed." ::= 53 lnSignalServerConfigChg TRAP-TYPE ENTERPRISE notes VARIABLES {lnSignalServerId, lnSignalOldServerType, lnSignalNewServerType, lnSignalWhatHasChanged } DESCRIPTION "This trap will be used by NotesView for AIX to signal the Alarm Manager daemon (nvalarmgrd) that there has been a Notes server configuration change." ::= 54 lnTrapRequestMostSevereStatus TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmServerHandle } DESCRIPTION "This trap will be sent by the NotesView management station when it needs to be updated with the most severe status of a given object" ::= 55 lnTrapDisplayAlarmClearServers TRAP-TYPE ENTERPRISE notes VARIABLES { lnSignalServerId, lnSignalServerName } DESCRIPTION "This trap will be generated by the NotesView Alarm Manager in order to display which server had its alarms cleared as a result of receiving lnAlarmClearServers (trap type 51). One of these traps will be generated for each server bound in the PDU for the lnAlarmClearServers trap. For display only. The Alarm Manager does not do any processing for this trap." ::= 60 lnTrapDisplayClearedAlarm TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr, lnAlarmMessage, lnAlarmMessageExt } DESCRIPTION "This trap will be sent by the NotesView management station when it receives a clearing alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager." ::= 70 lnTrapDisplayIndeterminateAlarm TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr, lnAlarmMessage, lnAlarmMessageExt } DESCRIPTION "This trap will be sent by the NotesView management station when it receives an indeterminate alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager." ::= 71 lnTrapDisplayWarningAlarm TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr, lnAlarmMessage, lnAlarmMessageExt } DESCRIPTION "This trap will be sent by the NotesView management station when it receives a warning alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed on the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager." ::= 72 lnTrapDisplayMinorAlarm TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr, lnAlarmMessage, lnAlarmMessageExt } DESCRIPTION "This trap will be sent by the NotesView management station when it receives a minor alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager." ::= 73 lnTrapDisplayCriticalAlarm TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr, lnAlarmMessage, lnAlarmMessageExt } DESCRIPTION "This trap will be sent by the NotesView management station when it receives a critical alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager." ::= 74 lnTrapDisplayMajorAlarm TRAP-TYPE ENTERPRISE notes VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr, lnAlarmMessage, lnAlarmMessageExt } DESCRIPTION "This trap will be sent by the NotesView management station when it receives a major alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager." ::= 75 END