-- MIB generated by mibgen version 1.0 SYMMIB-MIB-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, Gauge FROM RFC1155-SMI Counter64 FROM SNMPv2-SMI InternationalDisplayString FROM HOST-RESOURCES-MIB OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB DmiInteger64, dmiEventDateTime,dmiCompId,dmiEventSeverity, dmiEventStateKey,dmiEventAssociatedGroup, dmiEventSystem,dmiEventSubSystem FROM DMTF-DMI-MIB; DmiCounter ::= Counter DmiCounter64 ::= Counter64 DmiGauge ::= Gauge DmiInteger ::= INTEGER DmiOctetstring ::= OCTET STRING DmiDisplaystring ::= DisplayString DmiCompId ::= INTEGER DmiGroupId ::= INTEGER dmtf OBJECT IDENTIFIER ::= { enterprises 412 } dmtfStdMifs OBJECT IDENTIFIER ::= { dmtf 2 } dmtfDynOids OBJECT IDENTIFIER ::= { dmtf 3 } SsYMBIOSSymbiosEventPolling ::= SEQUENCE { symbiosFlagAtt1 DmiInteger, sMARTEventPollingAtt2 DmiInteger, scanEventPollingAtt3 DmiInteger, sAFTEEventPollingAtt4 DmiInteger, eventPollingPeriodAtt5 DmiInteger } sYMBIOSSymbiosEventPollingTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSymbiosEventPolling ACCESS not-accessible STATUS mandatory DESCRIPTION "This group is the Symbios Vendor unique group for dealing with Event Polling." ::= { enterprises symbios(1123) symbios-3(3) symbios-3-1(1) symbios-3-1-2(2) 5 } sYMBIOSSymbiosEventPollingEntry OBJECT-TYPE SYNTAX SsYMBIOSSymbiosEventPolling ACCESS not-accessible STATUS mandatory DESCRIPTION "This group is the Symbios Vendor unique group for dealing with Event Polling." INDEX { DmiCompId,DmiGroupId } ::= { sYMBIOSSymbiosEventPollingTable 1 } symbiosFlagAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-write STATUS mandatory DESCRIPTION "An Symbios Vendor Unique Flag." REFERENCE "'SYMBIOS|Symbios Event Polling|001' 1" ::= { sYMBIOSSymbiosEventPollingEntry 1 } sMARTEventPollingAtt2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), unknown(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag indicating whether or not the CI will poll for SMART events." REFERENCE "'SYMBIOS|Symbios Event Polling|001' 2" ::= { sYMBIOSSymbiosEventPollingEntry 2 } scanEventPollingAtt3 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), unknown(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag indicating whether or not the CI will scan for a change in Devices and Controllers." REFERENCE "'SYMBIOS|Symbios Event Polling|001' 3" ::= { sYMBIOSSymbiosEventPollingEntry 3 } sAFTEEventPollingAtt4 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), unknown(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag indicating whether or not the CI will poll for SAF-TE events." REFERENCE "'SYMBIOS|Symbios Event Polling|001' 4" ::= { sYMBIOSSymbiosEventPollingEntry 4 } eventPollingPeriodAtt5 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-write STATUS mandatory DESCRIPTION "The event poll period in number of minutes." REFERENCE "'SYMBIOS|Symbios Event Polling|001' 5" ::= { sYMBIOSSymbiosEventPollingEntry 5 } SsYMBIOSSymbiosSmartDevice ::= SEQUENCE { sYMBIOSSymbiosSmartDeviceState INTEGER, symSMARTDeviceIndexAtt1 DmiInteger, sMARTReportingCapabilityAtt2 DmiInteger } sYMBIOSSymbiosSmartDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSymbiosSmartDevice ACCESS not-accessible STATUS mandatory DESCRIPTION "This group is a Symbios Vendor unique group for dealing with Smart Storage Devices." ::= { symbios-3-1-2 6 } sYMBIOSSymbiosSmartDeviceEntry OBJECT-TYPE SYNTAX SsYMBIOSSymbiosSmartDevice ACCESS not-accessible STATUS mandatory DESCRIPTION "This group is a Symbios Vendor unique group for dealing with Smart Storage Devices." INDEX { DmiCompId,DmiGroupId, symSMARTDeviceIndexAtt1 } ::= { sYMBIOSSymbiosSmartDeviceTable 1 } sYMBIOSSymbiosSmartDeviceState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|Symbios Smart Device|001' 0" ::= { sYMBIOSSymbiosSmartDeviceEntry 0 } symSMARTDeviceIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the Symbios Vendor Unique Device info table. This index corresponds to the Storage Device index." REFERENCE "'SYMBIOS|Symbios Smart Device|001' 1" ::= { sYMBIOSSymbiosSmartDeviceEntry 1 } sMARTReportingCapabilityAtt2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), unknown(2), notSupported(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag indicating the state of a Devices's SMART reporting capability." REFERENCE "'SYMBIOS|Symbios Smart Device|001' 2" ::= { sYMBIOSSymbiosSmartDeviceEntry 2 } SsYMBIOSSAFTEProcessor ::= SEQUENCE { sYMBIOSSAFTEProcessorState INTEGER, sAFTEProcessorIndexAtt1 DmiInteger, storageControllerIndexAtt2 DmiInteger, sCSIIDAtt3 DmiInteger64, sCSILUNAtt4 DmiInteger64, vendorIDAtt5 DmiDisplaystring, productIDAtt6 DmiDisplaystring, firmwareRevisionLevelAtt7 DmiDisplaystring, enclosureUniqueIdentifierAtt8 DmiDisplaystring, sAFTESpecificationRevisionLevelAtt9 DmiDisplaystring, hasLocksAtt10 DmiInteger, hasSpeakersAtt11 DmiInteger, doorLockedAtt12 DmiInteger, speakerStatusAtt13 DmiInteger, powerOnMinutesAtt14 DmiInteger, powerOnCyclesAtt15 DmiInteger, temperatureOutOfRangeAtt16 DmiInteger } sYMBIOSSAFTEProcessorTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSAFTEProcessor ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines a SAF-TE Processor" ::= { symbios-3-1-2 7 } sYMBIOSSAFTEProcessorEntry OBJECT-TYPE SYNTAX SsYMBIOSSAFTEProcessor ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines a SAF-TE Processor" INDEX { DmiCompId,DmiGroupId, sAFTEProcessorIndexAtt1 } ::= { sYMBIOSSAFTEProcessorTable 1 } sYMBIOSSAFTEProcessorState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|SAF-TE Processor|001' 0" ::= { sYMBIOSSAFTEProcessorEntry 0 } sAFTEProcessorIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the SAF-TE processor table." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 1" ::= { sYMBIOSSAFTEProcessorEntry 1 } storageControllerIndexAtt2 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the Storage Controller table." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 2" ::= { sYMBIOSSAFTEProcessorEntry 2 } sCSIIDAtt3 OBJECT-TYPE SYNTAX DmiInteger64 ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI target/initiator identifier." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 3" ::= { sYMBIOSSAFTEProcessorEntry 3 } sCSILUNAtt4 OBJECT-TYPE SYNTAX DmiInteger64 ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI logical unit number." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 4" ::= { sYMBIOSSAFTEProcessorEntry 4 } vendorIDAtt5 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The vendor ID that is returned in the Inquiry command" REFERENCE "'SYMBIOS|SAF-TE Processor|001' 5" ::= { sYMBIOSSAFTEProcessorEntry 5 } productIDAtt6 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The product ID that is returned in the Inquiry command" REFERENCE "'SYMBIOS|SAF-TE Processor|001' 6" ::= { sYMBIOSSAFTEProcessorEntry 6 } firmwareRevisionLevelAtt7 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the current firmware revision of the SAF-TE processor " REFERENCE "'SYMBIOS|SAF-TE Processor|001' 7" ::= { sYMBIOSSAFTEProcessorEntry 7 } enclosureUniqueIdentifierAtt8 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "This field specifies the unique unit number for the SAF-TE processor." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 8" ::= { sYMBIOSSAFTEProcessorEntry 8 } sAFTESpecificationRevisionLevelAtt9 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the revision of the SAF-TE interface specification to which this device claims compliance." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 9" ::= { sYMBIOSSAFTEProcessorEntry 9 } hasLocksAtt10 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, then this SAF-TE processor is contained within an enclosure that has locks." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 10" ::= { sYMBIOSSAFTEProcessorEntry 10 } hasSpeakersAtt11 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, then this SAF-TE processor is contained within an enclosure that has speakers." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 11" ::= { sYMBIOSSAFTEProcessorEntry 11 } doorLockedAtt12 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, then this SAF-TE processor enclosure is locked." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 12" ::= { sYMBIOSSAFTEProcessorEntry 12 } speakerStatusAtt13 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, then this SAF-TE processor enclsoure speakers are turned on. If false, then the speakers are off or not installed." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 13" ::= { sYMBIOSSAFTEProcessorEntry 13 } powerOnMinutesAtt14 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Total number of power on minutes." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 14" ::= { sYMBIOSSAFTEProcessorEntry 14 } powerOnCyclesAtt15 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Total number of times the SAF-TE enclosure has been power on." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 15" ::= { sYMBIOSSAFTEProcessorEntry 15 } temperatureOutOfRangeAtt16 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, then the temperature is out of range." REFERENCE "'SYMBIOS|SAF-TE Processor|001' 16" ::= { sYMBIOSSAFTEProcessorEntry 16 } SsYMBIOSSAFTEControlledFan ::= SEQUENCE { sYMBIOSSAFTEControlledFanState INTEGER, sAFTEControlledFanIndexAtt1 DmiInteger, sAFTEProcessorIndexAtt2 DmiInteger, statusAtt3 DmiInteger } sYMBIOSSAFTEControlledFanTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSAFTEControlledFan ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a fan controlled by a SAF-TE Processor" ::= { symbios-3-1-2 8 } sYMBIOSSAFTEControlledFanEntry OBJECT-TYPE SYNTAX SsYMBIOSSAFTEControlledFan ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a fan controlled by a SAF-TE Processor" INDEX { DmiCompId,DmiGroupId, sAFTEControlledFanIndexAtt1 } ::= { sYMBIOSSAFTEControlledFanTable 1 } sYMBIOSSAFTEControlledFanState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|SAF-TE Controlled Fan|001' 0" ::= { sYMBIOSSAFTEControlledFanEntry 0 } sAFTEControlledFanIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the SAF-TE controlled fan table." REFERENCE "'SYMBIOS|SAF-TE Controlled Fan|001' 1" ::= { sYMBIOSSAFTEControlledFanEntry 1 } sAFTEProcessorIndexAtt2 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The Index to the SAF-TE proccessor that is controlling this fan." REFERENCE "'SYMBIOS|SAF-TE Controlled Fan|001' 2" ::= { sYMBIOSSAFTEControlledFanEntry 2 } statusAtt3 OBJECT-TYPE SYNTAX INTEGER { fanIsOperational(0), fanIsMalfunctioning(1), fanIsNotInstalled(2), unknownStatus(128) } ACCESS read-only STATUS mandatory DESCRIPTION "The fan status." REFERENCE "'SYMBIOS|SAF-TE Controlled Fan|001' 3" ::= { sYMBIOSSAFTEControlledFanEntry 3 } SsYMBIOSSAFTEControlledPowerSupply ::= SEQUENCE { sYMBIOSSAFTEControlledPowerSupplyState INTEGER, sAFTEControlledPowerSupplyIndexAtt1 DmiInteger, sAFTEProcessorIndexAtt2 DmiInteger, statusAtt3 DmiInteger } sYMBIOSSAFTEControlledPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSAFTEControlledPowerSupply ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a Power Supply controlled by a SAF-TE Processor" ::= { symbios-3-1-2 9 } sYMBIOSSAFTEControlledPowerSupplyEntry OBJECT-TYPE SYNTAX SsYMBIOSSAFTEControlledPowerSupply ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a Power Supply controlled by a SAF-TE Processor" INDEX { DmiCompId,DmiGroupId, sAFTEControlledPowerSupplyIndexAtt1 } ::= { sYMBIOSSAFTEControlledPowerSupplyTable 1 } sYMBIOSSAFTEControlledPowerSupplyState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|SAF-TE Controlled Power Supply|001' 0" ::= { sYMBIOSSAFTEControlledPowerSupplyEntry 0 } sAFTEControlledPowerSupplyIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the SAF-TE controlled Power Supply table." REFERENCE "'SYMBIOS|SAF-TE Controlled Power Supply|001' 1" ::= { sYMBIOSSAFTEControlledPowerSupplyEntry 1 } sAFTEProcessorIndexAtt2 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The Index to the SAF-TE proccessor that is controlling this Power Supply." REFERENCE "'SYMBIOS|SAF-TE Controlled Power Supply|001' 2" ::= { sYMBIOSSAFTEControlledPowerSupplyEntry 2 } statusAtt3 OBJECT-TYPE SYNTAX INTEGER { powerSupplyIsOperationalAndOn(0), powerSupplyIsOperationalAndOff(1), powerSupplyIsMalfunctioningAndCommandedOn(16), powerSupplyIsMalfunctioningAndCommandedOff(17), powerSupplyIsNotPresent(32), powerSupplyIsPresent(33), unknownStatus(128) } ACCESS read-only STATUS mandatory DESCRIPTION "The Power Supply status." REFERENCE "'SYMBIOS|SAF-TE Controlled Power Supply|001' 3" ::= { sYMBIOSSAFTEControlledPowerSupplyEntry 3 } SsYMBIOSSAFTEControlledSlot ::= SEQUENCE { sYMBIOSSAFTEControlledSlotState INTEGER, sAFTEControlledSlotIndexAtt1 DmiInteger, sAFTEProcessorIndexAtt2 DmiInteger, sCSIIDAtt3 DmiInteger64, numberOfInsertionsAtt4 DmiInteger, stateAtt5 DmiInteger, rebuildAtt6 DmiInteger, deviceFaultAtt7 DmiInteger, inFailedArrayAtt8 DmiInteger, inCriticalArrayAtt9 DmiInteger, parityCheckAtt10 DmiInteger, predictedFaultAtt11 DmiInteger } sYMBIOSSAFTEControlledSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSAFTEControlledSlot ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a Slot controlled by a SAF-TE Processor" ::= { symbios-3-1-2 10 } sYMBIOSSAFTEControlledSlotEntry OBJECT-TYPE SYNTAX SsYMBIOSSAFTEControlledSlot ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a Slot controlled by a SAF-TE Processor" INDEX { DmiCompId,DmiGroupId, sAFTEControlledSlotIndexAtt1 } ::= { sYMBIOSSAFTEControlledSlotTable 1 } sYMBIOSSAFTEControlledSlotState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 0" ::= { sYMBIOSSAFTEControlledSlotEntry 0 } sAFTEControlledSlotIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the SAF-TE controlled Slot table." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 1" ::= { sYMBIOSSAFTEControlledSlotEntry 1 } sAFTEProcessorIndexAtt2 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The Index to the SAF-TE proccessor table that is controlling this Slot." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 2" ::= { sYMBIOSSAFTEControlledSlotEntry 2 } sCSIIDAtt3 OBJECT-TYPE SYNTAX DmiInteger64 ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI target/initiator identifier for this slot." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 3" ::= { sYMBIOSSAFTEControlledSlotEntry 3 } numberOfInsertionsAtt4 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The total number of device insertions for this slot while the enclosure is powered on." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 4" ::= { sYMBIOSSAFTEControlledSlotEntry 4 } stateAtt5 OBJECT-TYPE SYNTAX INTEGER { devicePresentReady(1), devicePresentNotReady(2), devicePresentHotSpare(3), devicePresentReadyForRemoval(4), deviceNotPresent(5), deviceNotPresentReadyForInsertion(6), unconfigured(7), unknownState(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The slot state." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 5" ::= { sYMBIOSSAFTEControlledSlotEntry 5 } rebuildAtt6 OBJECT-TYPE SYNTAX INTEGER { notRebuilding(0), rebuildInProcess(1), rebuildStopped(2), unknownStatus(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Rebuild status" REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 6" ::= { sYMBIOSSAFTEControlledSlotEntry 6 } deviceFaultAtt7 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, the device has exhibited some hardware or data fault." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 7" ::= { sYMBIOSSAFTEControlledSlotEntry 7 } inFailedArrayAtt8 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, the device is in an array and an error has occurred on any member of the array." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 8" ::= { sYMBIOSSAFTEControlledSlotEntry 8 } inCriticalArrayAtt9 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, the device is in an array that is non fault-tolerant." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 9" ::= { sYMBIOSSAFTEControlledSlotEntry 9 } parityCheckAtt10 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, the device is in an array that is undergoing a parity check operation." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 10" ::= { sYMBIOSSAFTEControlledSlotEntry 10 } predictedFaultAtt11 OBJECT-TYPE SYNTAX INTEGER { false(0), true(1), unknown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If true, the device has been tagged by a fault prediction algorithm as being likely to fail in the near future." REFERENCE "'SYMBIOS|SAF-TE Controlled Slot|001' 11" ::= { sYMBIOSSAFTEControlledSlotEntry 11 } SsYMBIOSSAFTEControlledTemperatureSensor ::= SEQUENCE { sYMBIOSSAFTEControlledTemperatureSensorState INTEGER, sAFTEControlledTemperatureSensorIndexAtt1 DmiInteger, sAFTEProcessorIndexAtt2 DmiInteger, temperatureAtt3 DmiInteger } sYMBIOSSAFTEControlledTemperatureSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSAFTEControlledTemperatureSensor ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a Temperature sensor controlled by a SAF-TE Processor" ::= { symbios-3-1-2 11 } sYMBIOSSAFTEControlledTemperatureSensorEntry OBJECT-TYPE SYNTAX SsYMBIOSSAFTEControlledTemperatureSensor ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines status of a Temperature sensor controlled by a SAF-TE Processor" INDEX { DmiCompId,DmiGroupId, sAFTEControlledTemperatureSensorIndexAtt1 } ::= { sYMBIOSSAFTEControlledTemperatureSensorTable 1 } sYMBIOSSAFTEControlledTemperatureSensorState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|SAF-TE Controlled Temperature sensor|001' 0" ::= { sYMBIOSSAFTEControlledTemperatureSensorEntry 0 } sAFTEControlledTemperatureSensorIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "An index into the SAF-TE controlled Temperature sensor table." REFERENCE "'SYMBIOS|SAF-TE Controlled Temperature sensor|001' 1" ::= { sYMBIOSSAFTEControlledTemperatureSensorEntry 1 } sAFTEProcessorIndexAtt2 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The Index to the SAF-TE proccessor that is controlling this Temperature sensor." REFERENCE "'SYMBIOS|SAF-TE Controlled Temperature sensor|001' 2" ::= { sYMBIOSSAFTEControlledTemperatureSensorEntry 2 } temperatureAtt3 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The current temperature in degrees Fahrenheit." REFERENCE "'SYMBIOS|SAF-TE Controlled Temperature sensor|001' 3" ::= { sYMBIOSSAFTEControlledTemperatureSensorEntry 3 } SsYMBIOSNetworkAdapter802Port ::= SEQUENCE { sYMBIOSNetworkAdapter802PortState INTEGER, portIndexAtt1 DmiInteger, permanentNetworkAddressAtt2 DmiDisplaystring, currentNetworkAddressAtt3 DmiDisplaystring, connectorTypeAtt4 DmiInteger, dataRateAtt5 DmiInteger } sYMBIOSNetworkAdapter802PortTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSNetworkAdapter802Port ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains objects related to each of the network ports on the network adapter." ::= { symbios-3-1-2 12 } sYMBIOSNetworkAdapter802PortEntry OBJECT-TYPE SYNTAX SsYMBIOSNetworkAdapter802Port ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains objects related to each of the network ports on the network adapter." INDEX { DmiCompId,DmiGroupId, portIndexAtt1 } ::= { sYMBIOSNetworkAdapter802PortTable 1 } sYMBIOSNetworkAdapter802PortState OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory REFERENCE "'SYMBIOS|Network Adapter 802 Port|001' 0" ::= { sYMBIOSNetworkAdapter802PortEntry 0 } portIndexAtt1 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the ordinal of the network port within the network adapter, i.e. the 'port number'." REFERENCE "'SYMBIOS|Network Adapter 802 Port|001' 1" ::= { sYMBIOSNetworkAdapter802PortEntry 1 } permanentNetworkAddressAtt2 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "This is the node address stored permanently in the adapter." REFERENCE "'SYMBIOS|Network Adapter 802 Port|001' 2" ::= { sYMBIOSNetworkAdapter802PortEntry 2 } currentNetworkAddressAtt3 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "This is the node address that can be modified by software, sometimes referred to as the Locally Administered Address (LAA)." REFERENCE "'SYMBIOS|Network Adapter 802 Port|001' 3" ::= { sYMBIOSNetworkAdapter802PortEntry 3 } connectorTypeAtt4 OBJECT-TYPE SYNTAX INTEGER { unknown(1), aUI(2), uTPCategory3(3), uTPCategory4(4), uTPCategory5(5), bNC(6), sTPRJ45(7), sTPDB9(8), fiberMIC(9), appleAUI(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the type of connector currently being used to physically attach this port to the LAN." REFERENCE "'SYMBIOS|Network Adapter 802 Port|001' 4" ::= { sYMBIOSNetworkAdapter802PortEntry 4 } dataRateAtt5 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "This is the rate at which data is transferred over the LAN in Mbps." REFERENCE "'SYMBIOS|Network Adapter 802 Port|001' 5" ::= { sYMBIOSNetworkAdapter802PortEntry 5 } SdMTFNetworkAdapterHardware ::= SEQUENCE { networkTopologyAtt1 DmiInteger, transmissionCapabilityAtt2 DmiInteger, networkAdapterRAMSizeAtt3 DmiInteger, busTypeAtt4 DmiInteger, busWidthAtt5 DmiInteger } dmtfLANAdapterMIF OBJECT IDENTIFIER ::= { dmtfStdMifs 2 } dMTFNetworkAdapterHardwareTable OBJECT-TYPE SYNTAX SEQUENCE OF SdMTFNetworkAdapterHardware ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains objects related to the network adapter hardware." ::= { dmtfLANAdapterMIF 4 } dMTFNetworkAdapterHardwareEntry OBJECT-TYPE SYNTAX SdMTFNetworkAdapterHardware ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains objects related to the network adapter hardware." INDEX { DmiCompId,DmiGroupId } ::= { dMTFNetworkAdapterHardwareTable 1 } networkTopologyAtt1 OBJECT-TYPE SYNTAX INTEGER { other(1), x10MbpsEthernet(2), x100MbpsEthernet(3), x10010MbpsEthernet(4), x100MbpsVGAnyLAN(5), x4MbpsTokenRing(6), x16MbpsTokenRing(7), x164MbpsTokenRing(8), x2MbpsArcnet(9), x20MbpsArcnet(10), fDDI(11), aTM(12), appleTalk(13) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the network media access method/topology supported by this adapter." REFERENCE "'DMTF|Network Adapter Hardware|001' 1" ::= { dMTFNetworkAdapterHardwareEntry 1 } transmissionCapabilityAtt2 OBJECT-TYPE SYNTAX INTEGER { normal(1), fullDuplex(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmission capabilities of the adapter." REFERENCE "'DMTF|Network Adapter Hardware|001' 2" ::= { dMTFNetworkAdapterHardwareEntry 2 } networkAdapterRAMSizeAtt3 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "This is the total size of adapter RAM in Kb." REFERENCE "'DMTF|Network Adapter Hardware|001' 3" ::= { dMTFNetworkAdapterHardwareEntry 3 } busTypeAtt4 OBJECT-TYPE SYNTAX INTEGER { other(1), iSA(2), eISA(3), mCA(4), pCI(5), vL(6), pCMCIA(7), parallel(8), nEC98(9), motherboard(256) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the type of bus used to interface the adapter to the host." REFERENCE "'DMTF|Network Adapter Hardware|001' 4" ::= { dMTFNetworkAdapterHardwareEntry 4 } busWidthAtt5 OBJECT-TYPE SYNTAX INTEGER { other(1), unknown(2), x8BitCard(3), x16BitCard(4), x32BitCard(5), x64BitCard(6), x128BitCard(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the width (in bits) of the data path used to interface the adapter with the host." REFERENCE "'DMTF|Network Adapter Hardware|001' 5" ::= { dMTFNetworkAdapterHardwareEntry 5 } SsYMBIOSSymbiosHealth ::= SEQUENCE { overallHealthStatusAtt1 DmiInteger, overallControllerHealthStatusAtt2 DmiInteger, nonRecoverableControllersAtt3 DmiInteger, degradedControllersAtt4 DmiInteger, overallDeviceHealthStatusAtt5 DmiInteger, nonRecoverableDevicesAtt6 DmiInteger, degradedDevicesAtt7 DmiInteger } sYMBIOSSymbiosHealthTable OBJECT-TYPE SYNTAX SEQUENCE OF SsYMBIOSSymbiosHealth ACCESS not-accessible STATUS mandatory DESCRIPTION "This group is the Symbios Vendor unique group for reporting the health." ::= { symbios-3-1-2 17 } sYMBIOSSymbiosHealthEntry OBJECT-TYPE SYNTAX SsYMBIOSSymbiosHealth ACCESS not-accessible STATUS mandatory DESCRIPTION "This group is the Symbios Vendor unique group for reporting the health." INDEX { DmiCompId,DmiGroupId } ::= { sYMBIOSSymbiosHealthTable 1 } overallHealthStatusAtt1 OBJECT-TYPE SYNTAX INTEGER { other(1), unknown(2), oK(3), degraded(4), nonRecoverable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Status indicating the overall health." REFERENCE "'SYMBIOS|Symbios Health|001' 1" ::= { sYMBIOSSymbiosHealthEntry 1 } overallControllerHealthStatusAtt2 OBJECT-TYPE SYNTAX INTEGER { other(1), unknown(2), oK(3), degraded(4), nonRecoverable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Status indicating the overall health of the controllers." REFERENCE "'SYMBIOS|Symbios Health|001' 2" ::= { sYMBIOSSymbiosHealthEntry 2 } nonRecoverableControllersAtt3 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The number of controllers reporting a non-recoverable status." REFERENCE "'SYMBIOS|Symbios Health|001' 3" ::= { sYMBIOSSymbiosHealthEntry 3 } degradedControllersAtt4 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The number of controllers reporting a degraded status." REFERENCE "'SYMBIOS|Symbios Health|001' 4" ::= { sYMBIOSSymbiosHealthEntry 4 } overallDeviceHealthStatusAtt5 OBJECT-TYPE SYNTAX INTEGER { other(1), unknown(2), oK(3), degraded(4), nonRecoverable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Status indicating the overall health of the devices." REFERENCE "'SYMBIOS|Symbios Health|001' 5" ::= { sYMBIOSSymbiosHealthEntry 5 } nonRecoverableDevicesAtt6 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The number of devices reporting a non-recoverable status." REFERENCE "'SYMBIOS|Symbios Health|001' 6" ::= { sYMBIOSSymbiosHealthEntry 6 } degradedDevicesAtt7 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The number of devices reporting a degraded status." REFERENCE "'SYMBIOS|Symbios Health|001' 7" ::= { sYMBIOSSymbiosHealthEntry 7 } SiNTELMIFTOMIB ::= SEQUENCE { mIBNameAtt1 DmiDisplaystring, mIBOIDAtt2 DmiDisplaystring, disableTrapAtt3 DmiInteger } iNTELMIFTOMIBTable OBJECT-TYPE SYNTAX SEQUENCE OF SiNTELMIFTOMIB ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines attributes required for DMI to SNMP translati n." ::= { dmtfDynOids dmiDynOid386845712(386845712) dmiDynOid73111109(73111109) dmiDynOid3922453424(3922453424) 1737102472 } iNTELMIFTOMIBEntry OBJECT-TYPE SYNTAX SiNTELMIFTOMIB ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines attributes required for DMI to SNMP translati n." INDEX { DmiCompId,DmiGroupId } ::= { iNTELMIFTOMIBTable 1 } mIBNameAtt1 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The MIB name that defines this MIF" REFERENCE "'INTEL|MIFTOMIB|1.0' 1" ::= { iNTELMIFTOMIBEntry 1 } mIBOIDAtt2 OBJECT-TYPE SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The MIB OID that corresponds to this MIF" REFERENCE "'INTEL|MIFTOMIB|1.0' 2" ::= { iNTELMIFTOMIBEntry 2 } disableTrapAtt3 OBJECT-TYPE SYNTAX DmiInteger ACCESS read-write STATUS mandatory DESCRIPTION "This attribute can be changed to disable sending oftraps from this component" REFERENCE "'INTEL|MIFTOMIB|1.0' 3" ::= { iNTELMIFTOMIBEntry 3 } END