Wellfleet-CONSOLE-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:39:11 EDT 1995 IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfSerialPortGroup, wfServices FROM Wellfleet-COMMON-MIB; wfConsole OBJECT IDENTIFIER ::= { wfServices 1 } wfBaudRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Baud rate configured on the Technician Interface console" DEFVAL { 9600 } ::= { wfConsole 1 } wfDataBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Number of data bits configured on the Technician Interface console" DEFVAL { 8 } ::= { wfConsole 2 } wfParity OBJECT-TYPE SYNTAX INTEGER { none(1), odd(2), even(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Type of parity configured on the Technician Interface console" DEFVAL { none } ::= { wfConsole 3 } wfStopBits OBJECT-TYPE SYNTAX INTEGER { s1bit(1), s15bit(2), s2bit(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Number of stop bits configured on the Technician Interface console" DEFVAL { s1bit } ::= { wfConsole 4 } wfModemEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Enable the Technician Interface console to run over a modem" DEFVAL { disabled } ::= { wfConsole 5 } wfLinesPerScreen OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Number of lines which can be displayed in one screen on the Technician Interface console" DEFVAL { 24 } ::= { wfConsole 6 } wfMoreEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Enable the 'more' feature on the Technician Interface console" DEFVAL { enabled } ::= { wfConsole 7 } wfPrompt OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS obsolete DESCRIPTION "Character string which will be used as the system prompt on the Technician Interface console" ::= { wfConsole 8 } wfLoginTimeOut OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS obsolete DESCRIPTION "IF MODEM_ENABLED then time out in minutes to HUP when at the login prompt" DEFVAL { 1 } ::= { wfConsole 9 } wfPasswordTimeOut OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS obsolete DESCRIPTION "Timout on Password entry" DEFVAL { 1 } ::= { wfConsole 10 } wfCommandTimeOut OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS obsolete DESCRIPTION "IF MODEM_ENABLED then time out in minutes to HUP when at the command prompt" DEFVAL { 15 } ::= { wfConsole 11 } wfLoginRetries OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS obsolete DESCRIPTION "IF MODEM_ENABLED then limit # of login attempts then HUP" DEFVAL { 3 } ::= { wfConsole 12 } wfTotalLogins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Total number of TI login attempts" ::= { wfConsole 13 } wfUserLoginErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Total number of FAILED User login attempts" ::= { wfConsole 14 } wfManagerLoginErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Total number of FAILED Manager login attempts" ::= { wfConsole 15 } wfOtherLoginErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Total number of FAILED Other login attempts" ::= { wfConsole 16 } wfTtyFrameErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Count of TTY Frame errors" ::= { wfConsole 17 } wfTtyOverrunErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Count of TTY Overrun errors" ::= { wfConsole 18 } wfTtyParityErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Count of TTY Parity errors" ::= { wfConsole 19 } wfTtyInfifoErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Count of TTY Input Fifo errors" ::= { wfConsole 20 } wfSerialPortTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSerialPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration of system serial port(s)" ::= { wfSerialPortGroup 1 } wfSerialPortEntry OBJECT-TYPE SYNTAX WfSerialPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information for each serial port." INDEX { wfSerialPortNumber } ::= { wfSerialPortTable 1 } WfSerialPortEntry ::= SEQUENCE { wfSerialPortDelete INTEGER, wfSerialPortDisable INTEGER, wfSerialPortState INTEGER, wfSerialPortNumber INTEGER, wfSerialPortName DisplayString, wfSerialPortSlot INTEGER, wfSerialPortType INTEGER, wfSerialPortBaudRate INTEGER, wfSerialPortDataBits INTEGER, wfSerialPortParity INTEGER, wfSerialPortStopBits INTEGER, wfSerialPortModemEnable INTEGER, wfSerialPortLinesPerScreen INTEGER, wfSerialPortMoreEnable INTEGER, wfSerialPortPrompt DisplayString, wfSerialPortLoginTimeOut INTEGER, wfSerialPortPasswordTimeOut INTEGER, wfSerialPortCommandTimeOut INTEGER, wfSerialPortLoginRetries INTEGER, wfSerialPortTotalLogins Counter, wfSerialPortUserLoginErrors Counter, wfSerialPortManagerLoginErrors Counter, wfSerialPortOtherLoginErrors Counter, wfSerialPortTtyFrameErrors Counter, wfSerialPortTtyOverrunErrors Counter, wfSerialPortTtyParityErrors Counter, wfSerialPortTtyInfifoErrors Counter, wfSerialPortInitialSearchPath DisplayString, wfSerialPortManagerAutoScript DisplayString, wfSerialPortUserAutoScript DisplayString, wfSerialPortUserAbortLogoutDisable INTEGER, wfSerialPortHistoryDepth INTEGER, wfSerialPortAutoSaveNumFiles INTEGER, wfSerialPortAutoSaveVolume DisplayString, wfSerialPortModemIdSwRev DisplayString, wfSerialPortModemIdHwRev DisplayString, wfSerialPortModemLineState INTEGER, wfSerialPortModemCfgFactoryDefaults INTEGER, wfSerialPortModemCfgInitString DisplayString, wfSerialPortModemCfgDefaultString DisplayString, wfSerialPortModemCfgResultCodeString DisplayString, wfSerialPortModemCfgState INTEGER, wfSerialPortModemCfgCountry INTEGER, wfSerialPortModemInitState INTEGER } wfSerialPortDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Flag to indicate Serial Port instance deletion" DEFVAL { created } ::= { wfSerialPortEntry 1 } wfSerialPortDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable this Serial Port" DEFVAL { enabled } ::= { wfSerialPortEntry 2 } wfSerialPortState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of this Serial Port" DEFVAL { notpresent } ::= { wfSerialPortEntry 3 } wfSerialPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Serial Port number" ::= { wfSerialPortEntry 4 } wfSerialPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Serial Port name" ::= { wfSerialPortEntry 5 } wfSerialPortSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot number of Serial Port session" DEFVAL { 0 } ::= { wfSerialPortEntry 6 } wfSerialPortType OBJECT-TYPE SYNTAX INTEGER { ti(1), printer(2), rtelnet(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of Serial Port" DEFVAL { ti } ::= { wfSerialPortEntry 7 } wfSerialPortBaudRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Baud rate configured on this Serial Port" DEFVAL { 9600 } ::= { wfSerialPortEntry 8 } wfSerialPortDataBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of data bits configured on this Serial Port" DEFVAL { 8 } ::= { wfSerialPortEntry 9 } wfSerialPortParity OBJECT-TYPE SYNTAX INTEGER { none(1), odd(2), even(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of parity configured on this Serial Port" DEFVAL { none } ::= { wfSerialPortEntry 10 } wfSerialPortStopBits OBJECT-TYPE SYNTAX INTEGER { s1bit(1), s15bit(2), s2bit(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Number of stop bits configured on this Serial Port" DEFVAL { s1bit } ::= { wfSerialPortEntry 11 } wfSerialPortModemEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable the Serial Port to run with modem leads enabled" DEFVAL { disabled } ::= { wfSerialPortEntry 12 } wfSerialPortLinesPerScreen OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of lines which can be displayed in one screen on the Serial Port" DEFVAL { 24 } ::= { wfSerialPortEntry 13 } wfSerialPortMoreEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable the 'more' feature on the Serial Port" DEFVAL { enabled } ::= { wfSerialPortEntry 14 } wfSerialPortPrompt OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Character string which will be used as the system prompt on the Serial Port" ::= { wfSerialPortEntry 15 } wfSerialPortLoginTimeOut OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS mandatory DESCRIPTION "IF MODEM_ENABLED then time out in minutes to HUP when at the login prompt" DEFVAL { 1 } ::= { wfSerialPortEntry 16 } wfSerialPortPasswordTimeOut OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS mandatory DESCRIPTION "Timout on Password entry" DEFVAL { 1 } ::= { wfSerialPortEntry 17 } wfSerialPortCommandTimeOut OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS mandatory DESCRIPTION "IF MODEM_ENABLED then time out in minutes to HUP when at the command prompt" DEFVAL { 15 } ::= { wfSerialPortEntry 18 } wfSerialPortLoginRetries OBJECT-TYPE SYNTAX INTEGER(1..99) ACCESS read-write STATUS mandatory DESCRIPTION "IF MODEM_ENABLED then limit # of login attempts then HUP" DEFVAL { 3 } ::= { wfSerialPortEntry 19 } wfSerialPortTotalLogins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of TI login attempts on Serial Port" ::= { wfSerialPortEntry 20 } wfSerialPortUserLoginErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of FAILED User login attempts on Serial Port" ::= { wfSerialPortEntry 21 } wfSerialPortManagerLoginErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of FAILED Manager login attempts on Serial Port" ::= { wfSerialPortEntry 22 } wfSerialPortOtherLoginErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of FAILED Other login attempts on Serial Port" ::= { wfSerialPortEntry 23 } wfSerialPortTtyFrameErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of TTY Frame errors on Serial Port" ::= { wfSerialPortEntry 24 } wfSerialPortTtyOverrunErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of TTY Overrun errors on Serial Port" ::= { wfSerialPortEntry 25 } wfSerialPortTtyParityErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of TTY Parity errors on Serial Port" ::= { wfSerialPortEntry 26 } wfSerialPortTtyInfifoErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of TTY Input Fifo errors on Serial Port" ::= { wfSerialPortEntry 27 } wfSerialPortInitialSearchPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS obsolete DESCRIPTION "Example: 'A:;1:;2:' or '2:;4:6:;9:" ::= { wfSerialPortEntry 28 } wfSerialPortManagerAutoScript OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "for each login." ::= { wfSerialPortEntry 29 } wfSerialPortUserAutoScript OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "for each login." ::= { wfSerialPortEntry 30 } wfSerialPortUserAbortLogoutDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "a USER from escaping out of the User Autoscript" DEFVAL { disabled } ::= { wfSerialPortEntry 31 } wfSerialPortHistoryDepth OBJECT-TYPE SYNTAX INTEGER(1..40) ACCESS read-write STATUS mandatory DESCRIPTION "TI command history table size" DEFVAL { 20 } ::= { wfSerialPortEntry 32 } wfSerialPortAutoSaveNumFiles OBJECT-TYPE SYNTAX INTEGER(0..99) ACCESS read-write STATUS mandatory DESCRIPTION "Number of times AutoSave will save the log 0 - disable the AutoSave log" DEFVAL { 0 } ::= { wfSerialPortEntry 33 } wfSerialPortAutoSaveVolume OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Volume, to which AutoSave will save logs Example: 'A:' or '2:'" ::= { wfSerialPortEntry 34 } wfSerialPortModemIdSwRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..79)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of the modem's firmware version number." ::= { wfSerialPortEntry 35 } wfSerialPortModemIdHwRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..79)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of the revision number of the modem daughter card." ::= { wfSerialPortEntry 36 } wfSerialPortModemLineState OBJECT-TYPE SYNTAX INTEGER { unknown(1), onHook(2), offHook(3), connected(4), busiedOut(5), reset(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the modem." DEFVAL { unknown } ::= { wfSerialPortEntry 37 } wfSerialPortModemCfgFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled(2), the initialization string in wfModemCfgInitString is not sent to the modem." DEFVAL { enabled } ::= { wfSerialPortEntry 38 } wfSerialPortModemCfgInitString OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "An initialization string that will be sent to the modem each time the modem is rebooted." ::= { wfSerialPortEntry 39 } wfSerialPortModemCfgDefaultString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The string contains AT comands for initializing the modem every time the modem comes up, regardless of configuration." ::= { wfSerialPortEntry 40 } wfSerialPortModemCfgResultCodeString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The ASCII response string returned by the modem. Response strings will be returned in response to last command to the modem and in response to activity on the line." ::= { wfSerialPortEntry 41 } wfSerialPortModemCfgState OBJECT-TYPE SYNTAX INTEGER { cfgIdle(1), cfgInProgress(2), cfgResponseReturned(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the state of AT command processing. When a new initialization string is to be sent to the modem, the sender sets the state to cfgInProgress(2). After the command has been sent to the modem, and a result code has been returned, the state is set to cfgResponseReturned(3). Once the sender has received the return code, the sender sets the state to cfgIdle(1)." DEFVAL { cfgIdle } ::= { wfSerialPortEntry 42 } wfSerialPortModemCfgCountry OBJECT-TYPE SYNTAX INTEGER { northAmerica(1), japan(2), uk(3), germany(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the country the modem is designed to operate in. This object is not read from the modem directly. It must be entered manually when configuring the modem." DEFVAL { northAmerica } ::= { wfSerialPortEntry 43 } wfSerialPortModemInitState OBJECT-TYPE SYNTAX INTEGER { startup(1), getInfo(3), setDefaults(4), initialization(5), initComplete(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Indictes the state of the modem initialization sequence. The state will freeze in the state that fails when a failure is detected. Otherwise, the state will be set to initComplete when initialization completes successfully. The state number correspond to those for the COM port modems. Some of the states are not valid for the console modem." ::= { wfSerialPortEntry 44 } END -- Wellfleet-CONSOLE-MIB