Wellfleet-IP-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:43:00 EDT 1995 -- Modified 96.01.12 mad Added wfIpMultipathMethod and wfRipMaximumPath -- IMPORTS IpAddress, Counter, Gauge, Opaque FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfIpGroup, wfRipGroup, wfUdpGroup FROM Wellfleet-COMMON-MIB; wfIpBase OBJECT IDENTIFIER ::= { wfIpGroup 1 } wfIpBaseCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP." DEFVAL { created } ::= { wfIpBase 1 } wfIpBaseEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IP." DEFVAL { enabled } ::= { wfIpBase 2 } wfIpBaseState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpres(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the entire IP." DEFVAL { notpres } ::= { wfIpBase 3 } wfIpBaseForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), not-forwarding(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value." DEFVAL { forwarding } ::= { wfIpBase 4 } wfIpBaseDefaultTTL OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol." DEFVAL { 30 } ::= { wfIpBase 5 } wfIpBaseRipDiameter OBJECT-TYPE SYNTAX INTEGER(0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The Diameter of the RIP network. 1 less than 'infinity" DEFVAL { 15 } ::= { wfIpBase 6 } wfIpBaseRouteCache OBJECT-TYPE SYNTAX INTEGER { default(60) } ACCESS read-write STATUS mandatory DESCRIPTION "The interval at which routing entries are flushed from the forwarding tables." DEFVAL { default } ::= { wfIpBase 7 } wfIpBaseMibTables OBJECT-TYPE SYNTAX INTEGER { none(1), route(2), forwarding(3), both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures which routing MIB tables are maintained by IP. Previously, only the wfIpBaseRtTable was maintained. In order to support variable length subnets, the wfIpForwardTable was implemented. Supporting both these tables requires memory usage. The user can now configure which tables to maintain to reduce memory usage if needed. In the absence of variable length subnetting, these tables would maintain identical information." DEFVAL { route } ::= { wfIpBase 8 } wfIpBaseNetworks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of networks (including subnets) in the routing table" ::= { wfIpBase 9 } wfIpBaseZeroSubnetEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), rip1onasb(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates whether or not 0 subnets are allowed. If they are not allowed, interfaces configured with a 0 subnet will not be allowed. Value 'rip1onasb' implies 'enabled' also RIP1 support on all one or zero subnet" DEFVAL { disabled } ::= { wfIpBase 10 } wfIpBaseEstimatedNetworks OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the estimated number of networks that the router will need to keep in its routing table." ::= { wfIpBase 11 } wfIpBaseHosts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter indicates the number of hosts resolved by IP. This parameter will be equal to the number of instances of wfIpNetToMediaEntry" ::= { wfIpBase 12 } wfIpBaseEstimatedHosts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the estimated number of hosts that the router will need to keep in its hosts table." ::= { wfIpBase 13 } wfIpBaseDefaultOverSubnetEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates whether or not default route for subnets in subnetted network is allowed." DEFVAL { disabled } ::= { wfIpBase 14 } wfIpBaseMaxPolicyRules OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the maximum number of policy rules that can be configured per type (ACCEPT or ANNOUNCE) per protocol. In order to configure more policy rules, this parameter must be changed." DEFVAL { 32 } ::= { wfIpBase 15 } wfIpBaseRouteFilterSupport OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates whether or not route filters are supported." DEFVAL { disabled } ::= { wfIpBase 16 } wfRipMaximumPath OBJECT-TYPE SYNTAX INTEGER (1..12) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by RIP." DEFVAL { 1 } ::= { wfIpBase 17 } wfIpMultipathMethod OBJECT-TYPE SYNTAX INTEGER { disabled(1), round-robin(2), src-dest-hash(3), dest-hash(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Method to use to choose next hop when more than one is available. The round-robin method will send each packet destined for a given destination to a different nexthop until all have been used, then repeat its iteration through the list. src-dest-hash will use a single nexthop for all traffic originating at one given IP address and addressed to another given IP address. dest-hash is similar but uses only the destination's IP address to compute the nexthop. round-robin provides greater usage of network resources, but increases the chance for out of order packet delivery and similar problems. src-dest-hash increases the chances that packets will be delivered in order, but fails to take full advantage of the capabilities of the network. dest-hash makes the forwarding algorithm compatible with RSVP when the latter is enabled on the router." DEFVAL { disabled } ::= { wfIpBase 18 } wfIpBaseIspMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates whether or not ISP features are supported: i.e. BGP soloist, etc." DEFVAL { disabled } ::= { wfIpBase 19} wfIpBaseExtendedTrafficFilterSupport OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates whether or not extended traffic filters are supported." DEFVAL { disabled } ::= { wfIpBase 20 } wfIpOspfMaximumPath OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by OSPF." DEFVAL { 1 } ::= { wfIpBase 21 } wfIpBaseIcmpErrorLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of ICMP messages that is allowed to be transmitted within 1 second interval out of any individual interface. Disabled if set to 0." DEFVAL { 0 } ::= { wfIpBase 22 } wfIpBaseIbgpEcmp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "IBGP ECMP mode allows BGP to select route to IBGP next hop using available ECMP inter-domain routing information." DEFVAL { disabled } ::= { wfIpBase 23 } wfIpBaseRtbBalanceInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time interval (in minutes) to re-balance route pool. If this value is 0, then 'periodical re-balance' functionality is considered to be disabled." DEFVAL { 0 } ::= { wfIpBase 24 } wfIpBaseRtblP1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Controls the number of indexes in IP routing RTBL. If this value is 0, a value based on the number of hosts and the number of nets will be calculated. This parameter is closely linked with wfIpBaseRtblP2 in terms of balancing the rtbl" DEFVAL { 0 } ::= { wfIpBase 25 } wfIpBaseRtblP2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Controls the deviation of nodes per index from the average number of nodes per index. If this value is 0, a value based on the number of hosts and the number of nets will be calculated. This parameter is closely linked with wfIpBaseRtblP1 in terms of balancing the rtbl" DEFVAL { 0 } ::= { wfIpBase 26 } wfIpBaseArpBufLimitPrcnt OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the upper limit (in percent) of buffers that can be used by ARP for saving buffers when resolving ARP request" DEFVAL { 75 } ::= { wfIpBase 27 } wfIpBaseDirectedBcastEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Boxwide directed broadcast Enable/Disable parameter. Default is enabled." DEFVAL { enabled } ::= { wfIpBase 28 } wfIpBaseHostOnlyRip OBJECT-TYPE SYNTAX INTEGER { listen(1), notlisten(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether or not listen RIPs in Host Only Mode." DEFVAL { listen } ::= { wfIpBase 29 } wfIpBaseBlockSRR OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Blocks incoming IP packets that have the Loose or Strict Source Record Route ip option enabled. Default is disabled which will allow these packets through." DEFVAL { disabled } ::= { wfIpBase 30 } ---------------------------------------------------------------------- -- -- end of wfIpBase -- ---------------------------------------------------------------------- wfIpBaseRtEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpBaseRtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of elements in IP's routing table" ::= { wfIpGroup 2 } wfIpBaseRtEntry OBJECT-TYPE SYNTAX WfIpBaseRtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a route" INDEX { wfIpBaseRouteDest } ::= { wfIpBaseRtEntryTable 1 } WfIpBaseRtEntry ::= SEQUENCE { wfIpBaseRouteDest IpAddress, wfIpBaseRouteIfIndex INTEGER, wfIpBaseRouteMetric1 INTEGER, wfIpBaseRouteMetric2 INTEGER, wfIpBaseRouteMetric3 INTEGER, wfIpBaseRouteMetric4 INTEGER, wfIpBaseRouteNextHop IpAddress, wfIpBaseRouteType INTEGER, wfIpBaseRouteProto INTEGER, wfIpBaseRouteAge INTEGER, wfIpBaseRouteMask IpAddress, wfIpBaseRouteMetric5 INTEGER, wfIpBaseRouteInfo OBJECT IDENTIFIER } wfIpBaseRouteDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { wfIpBaseRtEntry 1 } wfIpBaseRouteIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { wfIpBaseRtEntry 2 } wfIpBaseRouteMetric1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpBaseRtEntry 3 } wfIpBaseRouteMetric2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpBaseRtEntry 4 } wfIpBaseRouteMetric3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpBaseRtEntry 5 } wfIpBaseRouteMetric4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpBaseRtEntry 6 } wfIpBaseRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)" ::= { wfIpBaseRtEntry 7 } wfIpBaseRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), direct(3), indirect(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. nagement stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object." ::= { wfIpBaseRtEntry 8 } wfIpBaseRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is(9), ospf(13), bgp(14), idpr(15), ahb(16), asr(17) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { wfIpBaseRtEntry 9 } wfIpBaseRouteAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { wfIpBaseRtEntry 10 } wfIpBaseRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { wfIpBaseRtEntry 11 } wfIpBaseRouteMetric5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpBaseRtEntry 12 } wfIpBaseRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A user-defined string which describes this Route entry" ::= { wfIpBaseRtEntry 13 } wfIpBaseHostEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpBaseHostEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "The list of elements in IP's host table" ::= { wfIpGroup 3 } wfIpBaseHostEntry OBJECT-TYPE SYNTAX WfIpBaseHostEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A description of a resolved host" INDEX { wfIpBaseNetToMediaIfIndex, wfIpBaseNetToMediaNetAddress } ::= { wfIpBaseHostEntryTable 1 } WfIpBaseHostEntry ::= SEQUENCE { wfIpBaseNetToMediaIfIndex INTEGER, wfIpBaseNetToMediaPhysAddress OCTET STRING, wfIpBaseNetToMediaNetAddress IpAddress, wfIpBaseNetToMediaType INTEGER } wfIpBaseNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { wfIpBaseHostEntry 1 } wfIpBaseNetToMediaPhysAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS obsolete DESCRIPTION "The media-dependent `physical' address." ::= { wfIpBaseHostEntry 2 } wfIpBaseNetToMediaNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The IpAddress corresponding to the media-dependent `physical' address." ::= { wfIpBaseHostEntry 3 } wfIpBaseNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), dynamic(3), static(4) } ACCESS read-write STATUS obsolete DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object." ::= { wfIpBaseHostEntry 4 } wfIpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpInterfaceEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "The list of configured IP interface" ::= { wfIpGroup 4 } wfIpInterfaceEntry OBJECT-TYPE SYNTAX WfIpInterfaceEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An IP interface description" INDEX { wfIpInterfaceAddr, wfIpInterfaceCircuit } ::= { wfIpInterfaceTable 1 } WfIpInterfaceEntry ::= SEQUENCE { wfIpInterfaceCreate INTEGER, wfIpInterfaceEnable INTEGER, wfIpInterfaceState INTEGER, wfIpInterfaceAddr IpAddress, wfIpInterfaceCircuit INTEGER, wfIpInterfaceMask IpAddress, wfIpInterfaceCost INTEGER, wfIpInterfaceCfgBcastAddr IpAddress, wfIpInterfaceBcastAddr IpAddress, wfIpInterfaceMTUDiscovery INTEGER, wfIpInterfaceAMR INTEGER, wfIpInterfaceASB INTEGER, wfIpInterfaceAddressResolutionType INTEGER, wfIpInterfaceProxy INTEGER, wfIpInterfaceHostCache INTEGER, wfIpInterfaceUdpXsumOn INTEGER, wfIpInterfaceCfgMacAddress OCTET STRING, wfIpInterfaceMacAddress OCTET STRING, wfIpInterfaceReasmMaxSize INTEGER, wfIpInterfaceMaxInfo INTEGER, wfIpInterfaceInReceives Counter, wfIpInterfaceInHdrErrors Counter, wfIpInterfaceInAddrErrors Counter, wfIpInterfaceForwDatagrams Counter, wfIpInterfaceInUnknownProtos Counter, wfIpInterfaceInDiscards Counter, wfIpInterfaceInDelivers Counter, wfIpInterfaceOutRequests Counter, wfIpInterfaceOutDiscards Counter, wfIpInterfaceOutNoRoutes Counter, wfIpInterfaceReasmTimeout INTEGER, wfIpInterfaceReasmReqds Counter, wfIpInterfaceReasmOKs Counter, wfIpInterfaceReasmFails Counter, wfIpInterfaceFragOKs Counter, wfIpInterfaceFragFails Counter, wfIpInterfaceFragCreates Counter, wfIpInterfaceIcmpInMsgs Counter, wfIpInterfaceIcmpInErrors Counter, wfIpInterfaceIcmpInDestUnreachs Counter, wfIpInterfaceIcmpInTimeExcds Counter, wfIpInterfaceIcmpInParmProbs Counter, wfIpInterfaceIcmpInSrcQuenchs Counter, wfIpInterfaceIcmpInRedirects Counter, wfIpInterfaceIcmpInEchos Counter, wfIpInterfaceIcmpInEchoReps Counter, wfIpInterfaceIcmpInTimestamps Counter, wfIpInterfaceIcmpInTimestampReps Counter, wfIpInterfaceIcmpInAddrMasks Counter, wfIpInterfaceIcmpInAddrMaskReps Counter, wfIpInterfaceIcmpOutMsgs Counter, wfIpInterfaceIcmpOutErrors Counter, wfIpInterfaceIcmpOutDestUnreachs Counter, wfIpInterfaceIcmpOutTimeExcds Counter, wfIpInterfaceIcmpOutParmProbs Counter, wfIpInterfaceIcmpOutSrcQuenchs Counter, wfIpInterfaceIcmpOutRedirects Counter, wfIpInterfaceIcmpOutEchos Counter, wfIpInterfaceIcmpOutEchoReps Counter, wfIpInterfaceIcmpOutTimestamps Counter, wfIpInterfaceIcmpOutTimestampReps Counter, wfIpInterfaceIcmpOutAddrMasks Counter, wfIpInterfaceIcmpOutAddrMaskReps Counter, wfIpInterfaceTrEndStation INTEGER, wfIpInterfaceSMDSGroupAddress OCTET STRING, wfIpInterfaceSMDSArpReqAddress OCTET STRING, wfIpInterfaceFRBcastDlci INTEGER, wfIpInterfaceFRMcast1Dlci INTEGER, wfIpInterfaceFRMcast2Dlci INTEGER, wfIpInterfaceRedirect INTEGER, wfIpInterfaceEnetArpEncaps INTEGER, wfIpInterfaceCacheMisses Counter, wfIpInterfaceCacheNetworks Gauge, wfIpInterfaceCacheRemoves Counter, wfIpInterfaceSlotMask Gauge, wfIpInterfaceEnableSecurity INTEGER, wfIpInterfaceStripSecurity INTEGER, wfIpInterfaceRequireOutSecurity INTEGER, wfIpInterfaceRequireInSecurity INTEGER, wfIpInterfaceMinLevel INTEGER, wfIpInterfaceMaxLevel INTEGER, wfIpInterfaceMustOutAuthority OCTET STRING, wfIpInterfaceMayOutAuthority OCTET STRING, wfIpInterfaceMustInAuthority OCTET STRING, wfIpInterfaceMayInAuthority OCTET STRING, wfIpInterfaceImplicitLabelEnabled INTEGER, wfIpInterfaceImplicitAuth OCTET STRING, wfIpInterfaceImplicitLevel INTEGER, wfIpInterfaceDefaultLabelEnabled INTEGER, wfIpInterfaceDefaultAuth OCTET STRING, wfIpInterfaceDefaultLevel INTEGER, wfIpInterfaceErrorLabelEnabled INTEGER, wfIpInterfaceErrorAuth OCTET STRING, wfIpInterfaceDropRxAuths Counter, wfIpInterfaceDropRxFormats Counter, wfIpInterfaceDropRxLevels Counter, wfIpInterfaceDropRxNoIpsos Counter, wfIpInterfaceDropTxAuths Counter, wfIpInterfaceDropTxLevels Counter, wfIpInterfaceDropTxNoIpsos Counter, wfIpInterfaceDropTxNoIpsoRooms Counter, wfIpInterfaceICMPInAdminProhib Counter, wfIpInterfaceICMPOutAdminProhib Counter, wfIpInterfaceFwdCacheSize INTEGER, wfIpInterfaceTunnelInfo OCTET STRING, wfIpInterfaceIcmpInRdiscSolicit Counter, wfIpInterfaceIcmpInRdiscAdvert Counter, wfIpInterfaceIcmpOutRdiscAdvert Counter, wfIpInterfaceRoutingDiscards Counter, wfIpInterfaceUnnumAssocAddr IpAddress, wfIpInterfaceUnnumAssocAlt INTEGER, wfIpInterfaceAtmArpMode INTEGER, wfIpInterfaceAtmArpServerAddress OCTET STRING, wfIpInterfaceAtmArpServerVcAgingEnable INTEGER, wfIpInterfaceAtmArpServerRegInterval INTEGER, wfIpInterfaceAtmArpServerConnState INTEGER, wfIpInterfaceAtmArpAttemptedCalls Counter, wfIpInterfaceAtmArpFailRetryCalls Counter, wfIpInterfaceAtmArpFailNoRetryCalls Counter, wfIpInterfaceAtmArpSuccessfulCalls Counter, wfIpInterfaceAtmArpAcceptedCalls Counter, wfIpInterfaceAtmArpOpenSvcs Counter, wfIpInterfaceAtmArpMisc INTEGER, wfIpInterfaceAtmArpMisc2 INTEGER, wfIpInterfaceMcastInPkts Counter, wfIpInterfaceMcastOutPkts Counter, wfIpInterfaceTrEsArpType INTEGER } wfIpInterfaceCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface." DEFVAL { create } ::= { wfIpInterfaceEntry 1 } wfIpInterfaceEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface." DEFVAL { enabled } ::= { wfIpInterfaceEntry 2 } wfIpInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), invalid(4), notpres(5) } ACCESS read-only STATUS obsolete DESCRIPTION "INvalid indicates an error in processing the cfg record" DEFVAL { notpres } ::= { wfIpInterfaceEntry 3 } wfIpInterfaceAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The IP Address to which this entry's addressing information pertains" ::= { wfIpInterfaceEntry 4 } wfIpInterfaceCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The Circuit Number that this interface runs over" ::= { wfIpInterfaceEntry 5 } wfIpInterfaceMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { wfIpInterfaceEntry 6 } wfIpInterfaceCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "The Cost metric associated with the IP Address of this entry" DEFVAL { 1 } ::= { wfIpInterfaceEntry 7 } wfIpInterfaceCfgBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "The user can specifcy a broadcast address for a NWIF" ::= { wfIpInterfaceEntry 8 } wfIpInterfaceBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. This is value used by the software" ::= { wfIpInterfaceEntry 9 } wfIpInterfaceMTUDiscovery OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Whether MTU discovery option is on/off" DEFVAL { off } ::= { wfIpInterfaceEntry 10 } wfIpInterfaceAMR OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Whether Address Mask Reply is ON/OFF" DEFVAL { off } ::= { wfIpInterfaceEntry 11 } wfIpInterfaceASB OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF" DEFVAL { off } ::= { wfIpInterfaceEntry 12 } wfIpInterfaceAddressResolutionType OBJECT-TYPE SYNTAX INTEGER { arp(1), ddn(3), pdn(4), in-arp(5), arp-in-arp(6), none(7), bfe-ddn(8), probe(9), arp-probe(10), atm-arp(11) } ACCESS read-write STATUS obsolete DESCRIPTION "Indicates which Address Resolution Type to use" DEFVAL { arp } ::= { wfIpInterfaceEntry 13 } wfIpInterfaceProxy OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Indicates Whether Proxy is on this Interface or not" DEFVAL { off } ::= { wfIpInterfaceEntry 14 } wfIpInterfaceHostCache OBJECT-TYPE SYNTAX INTEGER { cache-off(1), cache-120(120), cache-180(180), cache-240(240), cache-300(300), cache-600(600), cache-900(900), cache-1200(1200) } ACCESS read-write STATUS obsolete DESCRIPTION "Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age" DEFVAL { cache-off } ::= { wfIpInterfaceEntry 15 } wfIpInterfaceUdpXsumOn OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router" DEFVAL { on } ::= { wfIpInterfaceEntry 16 } wfIpInterfaceCfgMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "The desired mac set by the user" ::= { wfIpInterfaceEntry 17 } wfIpInterfaceMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS obsolete DESCRIPTION "The MAC Address for this Interface- actual one used" ::= { wfIpInterfaceEntry 18 } wfIpInterfaceReasmMaxSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { wfIpInterfaceEntry 19 } wfIpInterfaceMaxInfo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The maximum size of the INFO (non-MAC) field that this port will receive or transmit." ::= { wfIpInterfaceEntry 20 } wfIpInterfaceInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { wfIpInterfaceEntry 21 } wfIpInterfaceInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { wfIpInterfaceEntry 22 } wfIpInterfaceInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { wfIpInterfaceEntry 23 } wfIpInterfaceForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { wfIpInterfaceEntry 24 } wfIpInterfaceInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { wfIpInterfaceEntry 25 } wfIpInterfaceInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { wfIpInterfaceEntry 26 } wfIpInterfaceInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { wfIpInterfaceEntry 27 } wfIpInterfaceOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { wfIpInterfaceEntry 28 } wfIpInterfaceOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { wfIpInterfaceEntry 29 } wfIpInterfaceOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down." ::= { wfIpInterfaceEntry 30 } wfIpInterfaceReasmTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity." ::= { wfIpInterfaceEntry 31 } wfIpInterfaceReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of IP fragments received which needed to be reassembled at this entity." ::= { wfIpInterfaceEntry 32 } wfIpInterfaceReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of IP datagrams successfully reassembled." ::= { wfIpInterfaceEntry 33 } wfIpInterfaceReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { wfIpInterfaceEntry 34 } wfIpInterfaceFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of IP datagrams that have been successfully fragmented at this entity." ::= { wfIpInterfaceEntry 35 } wfIpInterfaceFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { wfIpInterfaceEntry 36 } wfIpInterfaceFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of IP datagram fragments that have been generated as a result of fragmentation at this entity." ::= { wfIpInterfaceEntry 37 } wfIpInterfaceIcmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The total number of ICMP messages which includes all those counted by wfIpInterfaceIcmpInErrors." ::= { wfIpInterfaceEntry 38 } wfIpInterfaceIcmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { wfIpInterfaceEntry 39 } wfIpInterfaceIcmpInDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { wfIpInterfaceEntry 40 } wfIpInterfaceIcmpInTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { wfIpInterfaceEntry 41 } wfIpInterfaceIcmpInParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { wfIpInterfaceEntry 42 } wfIpInterfaceIcmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Source Quench messages received." ::= { wfIpInterfaceEntry 43 } wfIpInterfaceIcmpInRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Redirect messages received." ::= { wfIpInterfaceEntry 44 } wfIpInterfaceIcmpInEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { wfIpInterfaceEntry 45 } wfIpInterfaceIcmpInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { wfIpInterfaceEntry 46 } wfIpInterfaceIcmpInTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Timestamp (request) messages received." ::= { wfIpInterfaceEntry 47 } wfIpInterfaceIcmpInTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Timestamp Reply messages received." ::= { wfIpInterfaceEntry 48 } wfIpInterfaceIcmpInAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Address Mask Request messages received." ::= { wfIpInterfaceEntry 49 } wfIpInterfaceIcmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Address Mask Reply messages received." ::= { wfIpInterfaceEntry 50 } wfIpInterfaceIcmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { wfIpInterfaceEntry 51 } wfIpInterfaceIcmpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { wfIpInterfaceEntry 52 } wfIpInterfaceIcmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { wfIpInterfaceEntry 53 } wfIpInterfaceIcmpOutTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { wfIpInterfaceEntry 54 } wfIpInterfaceIcmpOutParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { wfIpInterfaceEntry 55 } wfIpInterfaceIcmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Source Quench messages sent." ::= { wfIpInterfaceEntry 56 } wfIpInterfaceIcmpOutRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { wfIpInterfaceEntry 57 } wfIpInterfaceIcmpOutEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { wfIpInterfaceEntry 58 } wfIpInterfaceIcmpOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { wfIpInterfaceEntry 59 } wfIpInterfaceIcmpOutTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Timestamp (request) messages sent." ::= { wfIpInterfaceEntry 60 } wfIpInterfaceIcmpOutTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Timestamp Reply messages sent." ::= { wfIpInterfaceEntry 61 } wfIpInterfaceIcmpOutAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Address Mask Request messages sent." ::= { wfIpInterfaceEntry 62 } wfIpInterfaceIcmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { wfIpInterfaceEntry 63 } wfIpInterfaceTrEndStation OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Use Source Routing over token ring selection. Only applies if pam type is TRING." DEFVAL { off } ::= { wfIpInterfaceEntry 64 } wfIpInterfaceSMDSGroupAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "The SMDS group address" ::= { wfIpInterfaceEntry 65 } wfIpInterfaceSMDSArpReqAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "The SMDS arp req address" ::= { wfIpInterfaceEntry 66 } wfIpInterfaceFRBcastDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Frame Relay broadcast dlci" ::= { wfIpInterfaceEntry 67 } wfIpInterfaceFRMcast1Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Frame Relay multicast dlci #1" ::= { wfIpInterfaceEntry 68 } wfIpInterfaceFRMcast2Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Frame Relay multicast dlci #2" ::= { wfIpInterfaceEntry 69 } wfIpInterfaceRedirect OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Indicates Whether we're sending out redirects on this Interface or not" DEFVAL { on } ::= { wfIpInterfaceEntry 70 } wfIpInterfaceEnetArpEncaps OBJECT-TYPE SYNTAX INTEGER { enet(1), snap(2), both(3), probelsap(4), probeenet(5), probeboth(6), arpenetprobelsap(7), arpsnapprobelsap(8), arpbothprobelsap(9) } ACCESS read-write STATUS obsolete DESCRIPTION "The data link encapsulation type to use for ARP packets if the the media is ethernet." DEFVAL { enet } ::= { wfIpInterfaceEntry 71 } wfIpInterfaceCacheMisses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of FFT cache misses (i.e how many times did the cache gate have to do a look up in the RNP because the FFT didn't have the destination network" ::= { wfIpInterfaceEntry 72 } wfIpInterfaceCacheNetworks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS obsolete DESCRIPTION "Between 0 and wfIpInterfaceFwdCacheSize" ::= { wfIpInterfaceEntry 73 } wfIpInterfaceCacheRemoves OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of networks which have been flushed from the FFT because of aging" ::= { wfIpInterfaceEntry 74 } wfIpInterfaceSlotMask OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS obsolete DESCRIPTION "Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. This is only valid if wfIpInterfaceCircuit is 0." DEFVAL { 4294705152 } ::= { wfIpInterfaceEntry 75 } wfIpInterfaceEnableSecurity OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Enables RIPSO on this interface" DEFVAL { disabled } ::= { wfIpInterfaceEntry 76 } wfIpInterfaceStripSecurity OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2), all(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines which packets will have security option removed. This is a bit mask." ::= { wfIpInterfaceEntry 77 } wfIpInterfaceRequireOutSecurity OBJECT-TYPE SYNTAX INTEGER { forwarded(1), originated(2), all(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines which types of outbound packets are required to have a security option. This is a bit mask." DEFVAL { all } ::= { wfIpInterfaceEntry 78 } wfIpInterfaceRequireInSecurity OBJECT-TYPE SYNTAX INTEGER { yes(1) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines whether or not incoming packets must have security option. This is a bit mask." ::= { wfIpInterfaceEntry 79 } wfIpInterfaceMinLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines the minimum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpInterfaceEntry 80 } wfIpInterfaceMaxLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines the maximum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { topsecret } ::= { wfIpInterfaceEntry 81 } wfIpInterfaceMustOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits that must be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE." ::= { wfIpInterfaceEntry 82 } wfIpInterfaceMayOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits that may be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL." ::= { wfIpInterfaceEntry 83 } wfIpInterfaceMustInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits that must be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE." ::= { wfIpInterfaceEntry 84 } wfIpInterfaceMayInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits that may be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL." ::= { wfIpInterfaceEntry 85 } wfIpInterfaceImplicitLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Should an implicit label be associated with any inbound unlabelled datagrams?" DEFVAL { enabled } ::= { wfIpInterfaceEntry 86 } wfIpInterfaceImplicitAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits in the implicit label associated with an unlabelled inbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if implicit labelling is enabled (wfIpInterfaceImplicitLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and implicit labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpInterfaceEntry 87 } wfIpInterfaceImplicitLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines the classification level byte in the implicit label associated with an unlabelled inbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpInterfaceEntry 88 } wfIpInterfaceDefaultLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Should a default label be associated with any not-yet-labelled oubound datagrams?" DEFVAL { enabled } ::= { wfIpInterfaceEntry 89 } wfIpInterfaceDefaultAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits in the default label associated with a not-yet-labelled outbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if default labelling is enabled (wfIpInterfaceDefaultLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and default labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpInterfaceEntry 90 } wfIpInterfaceDefaultLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines the classification level byte to use in the default label associated with a not-yet-labelled outbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpInterfaceEntry 91 } wfIpInterfaceErrorLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Should an error label be associated with any outbound ICMP error packets?" DEFVAL { enabled } ::= { wfIpInterfaceEntry 92 } wfIpInterfaceErrorAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "Defines the authority bits in the error label associated with any outbount ICMP error packets. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if error labelling is enabled (wfIpInterfaceErrorLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and error labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE " ::= { wfIpInterfaceEntry 93 } wfIpInterfaceDropRxAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of received packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the flags other than the 'may' flags were specified." ::= { wfIpInterfaceEntry 94 } wfIpInterfaceDropRxFormats OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of received packets dropped because the security option format was invalid." ::= { wfIpInterfaceEntry 95 } wfIpInterfaceDropRxLevels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of received packets dropped because the classification level was out of range." ::= { wfIpInterfaceEntry 96 } wfIpInterfaceDropRxNoIpsos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of received packets dropped because no IP security label was present." ::= { wfIpInterfaceEntry 97 } wfIpInterfaceDropTxAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of transmitted packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the flags other than the 'may' flags were specified." ::= { wfIpInterfaceEntry 98 } wfIpInterfaceDropTxLevels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of transmitted packets dropped because the classification level was out of range." ::= { wfIpInterfaceEntry 99 } wfIpInterfaceDropTxNoIpsos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of packets not transmitted because no IP security label was present." ::= { wfIpInterfaceEntry 100 } wfIpInterfaceDropTxNoIpsoRooms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of packets not transmitted because there was not enough space left in the IP header to insert an IP security option." ::= { wfIpInterfaceEntry 101 } wfIpInterfaceICMPInAdminProhib OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of ICMP dest unreachable/communication administratively prohibited messages received. Note: may be sent by BFE or another system" ::= { wfIpInterfaceEntry 102 } wfIpInterfaceICMPOutAdminProhib OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of ICMP dest unreachable/communication administratively prohibited messages sent." ::= { wfIpInterfaceEntry 103 } wfIpInterfaceFwdCacheSize OBJECT-TYPE SYNTAX INTEGER(64..2147483647) ACCESS read-write STATUS obsolete DESCRIPTION "Maximum number of entries allowed in the Forwarding Table at one time. There is a forwarding table per interface." DEFVAL { 128 } ::= { wfIpInterfaceEntry 104 } wfIpInterfaceTunnelInfo OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "If non-null and if wfIpInterfaceCircuit is zero, this string contains encoded information for setting up this interface as a tunnel endpoint. Currently, no underlying code has been implemented for this feature." ::= { wfIpInterfaceEntry 105 } wfIpInterfaceIcmpInRdiscSolicit OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Router Discovery Solicit messages received." ::= { wfIpInterfaceEntry 106 } wfIpInterfaceIcmpInRdiscAdvert OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Router Discovery Advertisement messages received." ::= { wfIpInterfaceEntry 107 } wfIpInterfaceIcmpOutRdiscAdvert OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { wfIpInterfaceEntry 108 } wfIpInterfaceRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid" ::= { wfIpInterfaceEntry 109 } wfIpInterfaceUnnumAssocAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "The Associated IP address used by unnumbered interfaces when sourcing a packet. Rip also uses this attribute to make decisions about advertising subnets over unnumbered interfaces. Rip will advertise subnets over the unnumbered interface if they have the same mask as the associated address." ::= { wfIpInterfaceEntry 110 } wfIpInterfaceUnnumAssocAlt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable the option to automatically assign an alternate unnumbered associated address in the event that the primary associated address interface has gone down" DEFVAL { disabled } ::= { wfIpInterfaceEntry 111 } wfIpInterfaceAtmArpMode OBJECT-TYPE SYNTAX INTEGER { client(1), server(2), none(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Indicates whether ATMARP is a client or running as a server. A value of 'none' is for ATM WAN SVCs feature" DEFVAL { client } ::= { wfIpInterfaceEntry 112 } wfIpInterfaceAtmArpServerAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "The ATMARP server address" ::= { wfIpInterfaceEntry 113 } wfIpInterfaceAtmArpServerVcAgingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Indicates whether the ATMARP server VC should be aged (for client operation)" DEFVAL { enabled } ::= { wfIpInterfaceEntry 114 } wfIpInterfaceAtmArpServerRegInterval OBJECT-TYPE SYNTAX INTEGER { clientdefault(900), serverdefault(1200) } ACCESS read-write STATUS obsolete DESCRIPTION "For client operation, the interval between registration refreshes. For a server. this will be the duration a registration is valid. (in seconds)" DEFVAL { clientdefault } ::= { wfIpInterfaceEntry 115 } wfIpInterfaceAtmArpServerConnState OBJECT-TYPE SYNTAX INTEGER { init(1), wereserver(2), noservercfg(1028), closednotreg(4), openingnotreg(20), opennotregxxx(36), openfailnotreg(52), closedregingxxx(260), openingregingxxx(276), openreging(292), openfailregingxxx(308), closedreg(516), openingreg(532), openreg(548), openfailreg(564), closedregfail(772), openingregfail(788), openregfailxxx(804), openfailregfail(820), closednotregarp(12), openingnotregarp(28), opennotregarpxxx(44), openfailnotregarp(60), closedregingarpxxx(268), openingregingarpxxx(284), openregingarp(300), openfailregingarpxxx(316), closedregarp(524), openingregarp(540), openregarpxxx(556), openfailregarp(572), closedregfailarp(780), openingregfailarp(796), openregfailarpxxx(812), openfailregfailarp(828) } ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the state of the connection to the ATMARP server. This field should be interpreted as follows (bit 31 is msb, bit 0 is lsb): bits 0-3 are bits for determining ATMARP initialization, client/server, and if the client has ARP requests to send to the server: 0x001 INIT 0x002 WERESERVER 0x--4 CLIENT 0x--8 HAVEARPTOSEND bits 4-7 represent the state of the VC to the server: 0x-0- CLOSED 0x-1- OPENING 0x-2- OPEN 0x-3- OPENFAILED bits 8-11 represent the state of registration to the server: 0x0-- NOTREGISTERED 0x1-- REGISTERING 0x2-- REGISTERED 0x3-- REGISTRATIONFAILED 0x4-- NOSERVER" DEFVAL { init } ::= { wfIpInterfaceEntry 116 } wfIpInterfaceAtmArpAttemptedCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the number of calls ATMARP has attempted" ::= { wfIpInterfaceEntry 117 } wfIpInterfaceAtmArpFailRetryCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the number of attempted calls that have failed, but were retried" ::= { wfIpInterfaceEntry 118 } wfIpInterfaceAtmArpFailNoRetryCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the number of attempted calls that have failed, and were not retried" ::= { wfIpInterfaceEntry 119 } wfIpInterfaceAtmArpSuccessfulCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the number of originated calls completed successfully" ::= { wfIpInterfaceEntry 120 } wfIpInterfaceAtmArpAcceptedCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the number of received calls that were accepted" ::= { wfIpInterfaceEntry 121 } wfIpInterfaceAtmArpOpenSvcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the number of currently open calls" ::= { wfIpInterfaceEntry 122 } wfIpInterfaceAtmArpMisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Not in use." ::= { wfIpInterfaceEntry 123 } wfIpInterfaceAtmArpMisc2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Not in use." ::= { wfIpInterfaceEntry 124 } wfIpInterfaceMcastInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "The number of multicast packets received by the interface" ::= { wfIpInterfaceEntry 125 } wfIpInterfaceMcastOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "the number of multicast packets transmitted by the interface" ::= { wfIpInterfaceEntry 126 } wfIpInterfaceTrEsArpType OBJECT-TYPE SYNTAX INTEGER { ste(1), are(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Token Ring End Station ARP type ARE / STE" DEFVAL { ste } ::= { wfIpInterfaceEntry 127 } wfIpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of static routes" ::= { wfIpGroup 5 } wfIpStaticRouteEntry OBJECT-TYPE SYNTAX WfIpStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A static route definition" INDEX { wfIpSrIpAddress, wfIpSrIpNetMask, wfIpSrIpAddressRt } ::= { wfIpStaticRouteTable 1 } WfIpStaticRouteEntry ::= SEQUENCE { wfIpSrCreate INTEGER, wfIpSrEnable INTEGER, wfIpSrIpAddress IpAddress, wfIpSrIpNetMask IpAddress, wfIpSrCost INTEGER, wfIpSrNextHopAddr IpAddress, wfIpSrNextHopMask IpAddress, wfIpSrPreference INTEGER, wfIpSrIpAddressRt INTEGER, wfIpSrValid INTEGER, wfIpSrUnnumCct INTEGER } wfIpSrCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Static Route." DEFVAL { create } ::= { wfIpStaticRouteEntry 1 } wfIpSrEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Static Route." DEFVAL { enabled } ::= { wfIpStaticRouteEntry 2 } wfIpSrIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Address of this static route" ::= { wfIpStaticRouteEntry 3 } wfIpSrIpNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Network Mask for this Static Route" ::= { wfIpStaticRouteEntry 4 } wfIpSrCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Cost of this Static Route" DEFVAL { 1 } ::= { wfIpStaticRouteEntry 5 } wfIpSrNextHopAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Next Hop IP Address" ::= { wfIpStaticRouteEntry 6 } wfIpSrNextHopMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "The Next Hop IP Netmask" ::= { wfIpStaticRouteEntry 7 } wfIpSrPreference OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This Routes Preference" DEFVAL { 16 } ::= { wfIpStaticRouteEntry 8 } wfIpSrIpAddressRt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Route Identifier Which numbered route this is to be" ::= { wfIpStaticRouteEntry 9 } wfIpSrValid OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this Static Route is valid or not" DEFVAL { valid } ::= { wfIpStaticRouteEntry 10 } wfIpSrUnnumCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "static route over the Unnumbered interface" ::= { wfIpStaticRouteEntry 11 } wfIpAdjacentHostTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpAdjacentHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of Adjacent Hosts (static IP-Mac resolutions)" ::= { wfIpGroup 6 } wfIpAdjacentHostEntry OBJECT-TYPE SYNTAX WfIpAdjacentHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of an adjacent host" INDEX { wfIpAdjHostIpAddress } ::= { wfIpAdjacentHostTable 1 } WfIpAdjacentHostEntry ::= SEQUENCE { wfIpAdjHostCreate INTEGER, wfIpAdjHostEnable INTEGER, wfIpAdjHostIpAddress IpAddress, wfIpAdjHostIntf IpAddress, wfIpAdjHostIntfMask IpAddress, wfIpAdjHostMacAddr OCTET STRING, wfIpAdjHostEncaps INTEGER, wfIpAdjHostValid INTEGER, wfIpAdjHostX121Addr DisplayString, wfIpAdjHostSubaddr DisplayString, wfIpAdjHostTypeOfNumber INTEGER, wfIpAdjHostType INTEGER, wfIpAdjHostGreConnName DisplayString } wfIpAdjHostCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to Delete this Adjacent Host" DEFVAL { create } ::= { wfIpAdjacentHostEntry 1 } wfIpAdjHostEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to Disable this Host" DEFVAL { enabled } ::= { wfIpAdjacentHostEntry 2 } wfIpAdjHostIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of this Adjacent Host" ::= { wfIpAdjacentHostEntry 3 } wfIpAdjHostIntf OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Interface for this Adjacent Host" ::= { wfIpAdjacentHostEntry 4 } wfIpAdjHostIntfMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Network Mask of this Intf" ::= { wfIpAdjacentHostEntry 5 } wfIpAdjHostMacAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The LAN Address for this HOST" ::= { wfIpAdjacentHostEntry 6 } wfIpAdjHostEncaps OBJECT-TYPE SYNTAX INTEGER { enet(1), snap(2), pdn(3), ddn(4), null(5), snapip(6), gre(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The encapsulation type of this entry" DEFVAL { enet } ::= { wfIpAdjacentHostEntry 7 } wfIpAdjHostValid OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the record passed validation or not" DEFVAL { valid } ::= { wfIpAdjacentHostEntry 8 } wfIpAdjHostX121Addr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "WAN address (X.121, E.164, etc.) used to establish an SVC to the adjacent host." ::= { wfIpAdjacentHostEntry 9 } wfIpAdjHostSubaddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The subaddress used to establish an SVC to the adjacent host." ::= { wfIpAdjacentHostEntry 10 } wfIpAdjHostTypeOfNumber OBJECT-TYPE SYNTAX INTEGER { unknown(1), international(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of number used to establish an SVC to the adjacent host." DEFVAL { international } ::= { wfIpAdjacentHostEntry 11 } wfIpAdjHostType OBJECT-TYPE SYNTAX INTEGER { fre164(1), default(2), frx121(3), frdlci(4), gre(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of adjacent host." DEFVAL { default } ::= { wfIpAdjacentHostEntry 12 } wfIpAdjHostGreConnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of the remote GRE connection to which an adjacent host is configured." ::= { wfIpAdjacentHostEntry 13 } wfIpTrafficFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpTrafficFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Traffic Filters" ::= { wfIpGroup 7 } wfIpTrafficFilterEntry OBJECT-TYPE SYNTAX WfIpTrafficFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A traffic filter definition" INDEX { wfIpTrafficFilterInterface, wfIpTrafficFilterCircuit, wfIpTrafficFilterRuleNumber, wfIpTrafficFilterFragment } ::= { wfIpTrafficFilterTable 1 } WfIpTrafficFilterEntry ::= SEQUENCE { wfIpTrafficFilterCreate INTEGER, wfIpTrafficFilterEnable INTEGER, wfIpTrafficFilterStatus INTEGER, wfIpTrafficFilterCounter Counter, wfIpTrafficFilterDefinition Opaque, wfIpTrafficFilterReserved INTEGER, wfIpTrafficFilterInterface IpAddress, wfIpTrafficFilterCircuit INTEGER, wfIpTrafficFilterRuleNumber INTEGER, wfIpTrafficFilterFragment INTEGER, wfIpTrafficFilterName DisplayString, wfIpTrafficFilterPrecedence INTEGER, wfIpTrafficFilterType INTEGER, wfIpTrafficFilterDSOopCounter Counter, wfIpTrafficFilterDSPrecedence INTEGER, wfIpTrafficFilterDSBytes Counter, wfIpTrafficFilterDSOopBytes Counter } wfIpTrafficFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfIpTrafficFilterEntry 1 } wfIpTrafficFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfIpTrafficFilterEntry 2 } wfIpTrafficFilterStatus OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfIpTrafficFilterEntry 3 } wfIpTrafficFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfIpTrafficFilterEntry 4 } wfIpTrafficFilterDefinition OBJECT-TYPE SYNTAX Opaque ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfIpTrafficFilterEntry 5 } wfIpTrafficFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfIpTrafficFilterEntry 6 } wfIpTrafficFilterInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address of the IP interface to which this filter is applied." ::= { wfIpTrafficFilterEntry 7 } wfIpTrafficFilterCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the Circuit to which the filter is applied." ::= { wfIpTrafficFilterEntry 8 } wfIpTrafficFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the rule." ::= { wfIpTrafficFilterEntry 9 } wfIpTrafficFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfIpTrafficFilterEntry 10 } wfIpTrafficFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of the rule number" ::= { wfIpTrafficFilterEntry 11 } wfIpTrafficFilterPrecedence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Precedence of the filter. If 2 or more rules match the one with higher precedence will be applied." ::= { wfIpTrafficFilterEntry 12 } wfIpTrafficFilterType OBJECT-TYPE SYNTAX INTEGER { ip(1), staticdiffserv(2), copsdiffserv(3), dynamicdiffserv(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of this filter." DEFVAL { ip } ::= { wfIpTrafficFilterEntry 13 } wfIpTrafficFilterDSOopCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DiffServ Police out-of-profile packet counter." ::= { wfIpTrafficFilterEntry 14 } wfIpTrafficFilterDSPrecedence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Precedence of the filter. If 2 or more rules match the one with higher precedence will be applied. The lower the value of this field the higher the precedebnce." DEFVAL { 16 } ::= { wfIpTrafficFilterEntry 15 } wfIpTrafficFilterDSBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes this DS filter was applied to. This is the sum of lengths of all the packets that matched this filter" ::= { wfIpTrafficFilterEntry 16 } wfIpTrafficFilterDSOopBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes counted as out-of profile." ::= { wfIpTrafficFilterEntry 17 } wfIpForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Forwarding table The IP Forwarding Table obsoletes and replaces the wfIpBaseRt Table It adds knowledge of the autonomous system of the next hop, multiple next hop support, policy routing support, and supernetting. This is based on the IP Forwarding MIB presented in RFC 1354. It adds the network mask to the index." ::= { wfIpGroup 16 } wfIpForwardEntry OBJECT-TYPE SYNTAX WfIpForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A forwarding entry" INDEX { wfIpForwardDest, wfIpForwardMask, wfIpForwardProto, wfIpForwardPolicy, wfIpForwardNextHop } ::= { wfIpForwardTable 1 } WfIpForwardEntry ::= SEQUENCE { wfIpForwardDest IpAddress, wfIpForwardMask IpAddress, wfIpForwardPolicy INTEGER, wfIpForwardNextHop IpAddress, wfIpForwardIfIndex INTEGER, wfIpForwardType INTEGER, wfIpForwardProto INTEGER, wfIpForwardAge INTEGER, wfIpForwardInfo OBJECT IDENTIFIER, wfIpForwardNextHopAS INTEGER, wfIpForwardMetric1 INTEGER, wfIpForwardMetric2 INTEGER, wfIpForwardMetric3 INTEGER, wfIpForwardMetric4 INTEGER, wfIpForwardMetric5 INTEGER } wfIpForwardDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the wfIpForwardMask object is not equal to x." ::= { wfIpForwardEntry 1 } wfIpForwardMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the mask to be logical-ANDed with the destination address before being compared to the value in the wfIpForwardDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipForwardMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the wfIpForwardDest object is not equal to wfIpForwardDest." ::= { wfIpForwardEntry 2 } wfIpForwardPolicy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by wfIpForwardProtocol specified otherwise, the policy specifier is the IP TOS field. The encoding of IP TOS is ans specified by the following convention. Zero indicated the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Protocols defining 'policy' otherwise must ei- ther define a set of values which are valid for this object or must implement an integer- instanced policy table for which this object's value acts as an index." ::= { wfIpForwardEntry 3 } wfIpForwardNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "On remote routes, the address of the next system en route; Otherwise, 0.0.0.0" ::= { wfIpForwardEntry 4 } wfIpForwardIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value which uniquely identifies the local interface through which the next hop of this route should be reached." ::= { wfIpForwardEntry 5 } wfIpForwardType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), direct(3), indirect(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination." ::= { wfIpForwardEntry 6 } wfIpForwardProto OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isis(9), esis(10), ospf(13), bgp(14), idpr(15), ahb(16), asr(17) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { wfIpForwardEntry 7 } wfIpForwardAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { wfIpForwardEntry 8 } wfIpForwardInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's wfIpForwardProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value." ::= { wfIpForwardEntry 9 } wfIpForwardNextHopAS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Autonomous System Number of the Next Hop. When this is unknown or not relevant to the protocol indicated by ipForwardProto, zero." ::= { wfIpForwardEntry 10 } wfIpForwardMetric1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpForwardEntry 11 } wfIpForwardMetric2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpForwardEntry 12 } wfIpForwardMetric3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpForwardEntry 13 } wfIpForwardMetric4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpForwardEntry 14 } wfIpForwardMetric5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { wfIpForwardEntry 15 } wfIpNetToMediaEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of elements in IP's host table" ::= { wfIpGroup 18 } wfIpNetToMediaEntry OBJECT-TYPE SYNTAX WfIpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a resolved host" INDEX { wfIpNetToMediaIfIndex, wfIpNetToMediaNetAddress } ::= { wfIpNetToMediaEntryTable 1 } WfIpNetToMediaEntry ::= SEQUENCE { wfIpNetToMediaIfIndex INTEGER, wfIpNetToMediaPhysAddress OCTET STRING, wfIpNetToMediaNetAddress IpAddress, wfIpNetToMediaType INTEGER } wfIpNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { wfIpNetToMediaEntry 1 } wfIpNetToMediaPhysAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The media-dependent `physical' address." ::= { wfIpNetToMediaEntry 2 } wfIpNetToMediaNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IpAddress corresponding to the media-dependent `physical' address." ::= { wfIpNetToMediaEntry 3 } wfIpNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), dynamic(3), static(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object." ::= { wfIpNetToMediaEntry 4 } wfUdp OBJECT IDENTIFIER ::= { wfUdpGroup 1 } wfUdpInDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP datagrams delivered to UDP users." ::= { wfUdp 1 } wfUdpNoPorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received UDP datagrams for which there was no application at the destination port." ::= { wfUdp 2 } wfUdpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { wfUdp 3 } wfUdpOutDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP datagrams sent from this entity." ::= { wfUdp 4 } wfUdpTable OBJECT-TYPE SYNTAX SEQUENCE OF WfUdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The UDP listener table contains information about this entity's UDP end-points on which a local application is currently accepting datagrams." ::= { wfUdpGroup 2 } wfUdpEntry OBJECT-TYPE SYNTAX WfUdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A particular entry" INDEX { wfUdpLocalAddress, wfUdpLocalPort } ::= { wfUdpTable 1 } WfUdpEntry ::= SEQUENCE { wfUdpLocalAddress IpAddress, wfUdpLocalPort INTEGER } wfUdpLocalAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface asociated with the node, the value 0.0.0.0 is used." ::= { wfUdpEntry 1 } wfUdpLocalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port value" ::= { wfUdpEntry 2 } wfUdpMpr OBJECT IDENTIFIER ::= { wfUdpGroup 3 } wfUdpMprCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter for SIAC MPR. The default is created." DEFVAL { created } ::= { wfUdpMpr 1 } wfUdpMprEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables router wide MPR functionality." DEFVAL { enabled } ::= { wfUdpMpr 2 } wfUdpMprStartPort OBJECT-TYPE SYNTAX INTEGER { minumum (10000), default (50000), maximum (60000) } ACCESS read-write STATUS mandatory DESCRIPTION "Starting UDP port number for MPR address resolution." DEFVAL { default } ::= { wfUdpMpr 3 } wfUdpMprNumberOfPorts OBJECT-TYPE SYNTAX INTEGER { default (64), maximum (256) } ACCESS read-write STATUS mandatory DESCRIPTION "Max number of UDP ports in mapping table." DEFVAL { default } ::= { wfUdpMpr 4 } wfUdpMprStatisticsEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for global MPR statistics collection." DEFVAL { disabled } ::= { wfUdpMpr 5 } wfUdpMprInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received by MPR" ::= { wfUdpMpr 6 } wfUdpMprOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets sent by MPR" ::= { wfUdpMpr 7 } wfUdpMprGenPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets generated by MPR." ::= { wfUdpMpr 8 } wfUdpMprLookupDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to mcast address lokup failure." ::= { wfUdpMpr 9 } wfUdpMprDisableDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to mapping entry being disabled." ::= { wfUdpMpr 10 } wfUdpMprMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF WfUdpMprMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The MPR Mapping table contains information regarding UDP port to IP multicast address resolution." ::= { wfUdpGroup 4 } wfUdpMprMappingEntry OBJECT-TYPE SYNTAX WfUdpMprMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A particular entry" INDEX { wfUdpMprMapPort } ::= { wfUdpMprMappingTable 1 } WfUdpMprMappingEntry ::= SEQUENCE { wfUdpMprMapCreate INTEGER, wfUdpMprMapEnable INTEGER, wfUdpMprMapPort INTEGER, wfUdpMprMapMcastAddr IpAddress, wfUdpMprMapStatisticsEnable INTEGER, wfUdpMprMapInPkts Counter, wfUdpMprMapOutPkts Counter, wfUdpMprMapGenPkts Counter, wfUdpMprMapLookupDrops Counter, wfUdpMprMapDisableDrops Counter } wfUdpMprMapCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Mapping entry create/delete attribute." DEFVAL { created } ::= { wfUdpMprMappingEntry 1 } wfUdpMprMapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Mapping entry enable/disable attribute." DEFVAL { enabled } ::= { wfUdpMprMappingEntry 2 } wfUdpMprMapPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The relative (relative to start port) port number of the MPR mapping entry." ::= { wfUdpMprMappingEntry 3 } wfUdpMprMapMcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP multicast address associated with this port." ::= { wfUdpMprMappingEntry 4 } wfUdpMprMapStatisticsEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "MPR mapping entry specific statistics collection enable/disable attribute." DEFVAL { disabled } ::= { wfUdpMprMappingEntry 5 } wfUdpMprMapInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of MPR packets received for this port." ::= { wfUdpMprMappingEntry 6 } wfUdpMprMapOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of MPR packets sent with this port number." ::= { wfUdpMprMappingEntry 7 } wfUdpMprMapGenPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of MPR packets generated by MPR with this port number." ::= { wfUdpMprMappingEntry 8 } wfUdpMprMapLookupDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of MPR packets dropped for this port because mcast address lookups failed." ::= { wfUdpMprMappingEntry 9 } wfUdpMprMapDisableDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of MPR packets dropped for this port because the mapping record is disabled." ::= { wfUdpMprMappingEntry 10 } wfRipIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfRipIntfEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "The list of configured RIP interfaces" ::= { wfRipGroup 1 } wfRipIntfEntry OBJECT-TYPE SYNTAX WfRipIntfEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A description of a RIP interface" INDEX { wfRipInterfaceIndex } ::= { wfRipIntfTable 1 } WfRipIntfEntry ::= SEQUENCE { wfRipInterfaceCreate INTEGER, wfRipInterfaceEnable INTEGER, wfRipInterfaceState INTEGER, wfRipInterfaceIndex IpAddress, wfRipInterfaceSupply INTEGER, wfRipInterfaceListen INTEGER, wfRipInterfaceDefaultRouteSupply INTEGER, wfRipInterfaceDefaultRouteListen INTEGER, wfRipInterfacePoisonedReversed INTEGER } wfRipInterfaceCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RIP Interface instance." DEFVAL { create } ::= { wfRipIntfEntry 1 } wfRipInterfaceEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RIP interface." DEFVAL { enabled } ::= { wfRipIntfEntry 2 } wfRipInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpres(4) } ACCESS read-only STATUS obsolete DESCRIPTION "The current state of RIP on this interface." DEFVAL { notpres } ::= { wfRipIntfEntry 3 } wfRipInterfaceIndex OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The IP interface to run RIP on." ::= { wfRipIntfEntry 4 } wfRipInterfaceSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Transmit RIP packets." DEFVAL { enabled } ::= { wfRipIntfEntry 5 } wfRipInterfaceListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Whether to listen to RIP packets" DEFVAL { enabled } ::= { wfRipIntfEntry 6 } wfRipInterfaceDefaultRouteSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Transmit the default route, 0.0.0.0, in RIP packets." DEFVAL { disabled } ::= { wfRipIntfEntry 7 } wfRipInterfaceDefaultRouteListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Receive the default route, 0.0.0.0, in RIP packets." DEFVAL { disabled } ::= { wfRipIntfEntry 8 } wfRipInterfacePoisonedReversed OBJECT-TYPE SYNTAX INTEGER { poisoned(1), actual(2), split(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Specifies how the router advertises routes it has learned from a neighboring router in periodic updates subsequently sent to the neighbor. If 'Poisoned', the node implements poisoned reverse. The router now advertises routes learned from a neighbor in RIP updates subsequently sent to that neighbor with a hop count of wfRipBaseRipNetworkDiameter plus 1, (thus declaring the destination unreachable). If 'Split', the router implements a split-horizon, and omits routes learned from a neighbor in RIP updates subsequently sent to that neighbor. If 'Actual', the learned cost of the route is advertised." DEFVAL { poisoned } ::= { wfRipIntfEntry 9 } wfRipInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF WfRipInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of configured RIP interfaces" ::= { wfRipGroup 2 } wfRipInterfaceEntry OBJECT-TYPE SYNTAX WfRipInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a RIP interface" INDEX { wfRipIntfIndex, wfRipIntfCct } ::= { wfRipInterfaceTable 1 } WfRipInterfaceEntry ::= SEQUENCE { wfRipIntfCreate INTEGER, wfRipIntfEnable INTEGER, wfRipIntfState INTEGER, wfRipIntfIndex IpAddress, wfRipIntfSupply INTEGER, wfRipIntfListen INTEGER, wfRipIntfDefaultRouteSupply INTEGER, wfRipIntfDefaultRouteListen INTEGER, wfRipIntfPoisonedReversed INTEGER, wfRipIntfCct INTEGER, wfRipIntfTTL INTEGER, wfRipIntfBroadcastTimer INTEGER, wfRipIntfTimeoutTimer INTEGER, wfRipIntfHolddownTimer INTEGER, wfRipIntfCompSwitch INTEGER, wfRipIntfTriggeredUpdates INTEGER, wfRipIntfAuthType INTEGER, wfRipIntfAuthentication DisplayString, wfRipIntfInitStabilizationTimer INTEGER, wfRipIntfSVCBroadcast INTEGER, wfRipIntfDefaultRouteCost INTEGER } wfRipIntfCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RIP Interface instance." DEFVAL { create } ::= { wfRipInterfaceEntry 1 } wfRipIntfEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RIP interface." DEFVAL { enabled } ::= { wfRipInterfaceEntry 2 } wfRipIntfState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpres(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of RIP on this interface." DEFVAL { notpres } ::= { wfRipInterfaceEntry 3 } wfRipIntfIndex OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP interface to run RIP on." ::= { wfRipInterfaceEntry 4 } wfRipIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit RIP packets." DEFVAL { enabled } ::= { wfRipInterfaceEntry 5 } wfRipIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to listen to RIP packets" DEFVAL { enabled } ::= { wfRipInterfaceEntry 6 } wfRipIntfDefaultRouteSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), generated(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the default route, 0.0.0.0, in RIP packets." DEFVAL { disabled } ::= { wfRipInterfaceEntry 7 } wfRipIntfDefaultRouteListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive the default route, 0.0.0.0, in RIP packets." DEFVAL { disabled } ::= { wfRipInterfaceEntry 8 } wfRipIntfPoisonedReversed OBJECT-TYPE SYNTAX INTEGER { poisoned(1), actual(2), split(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies how the router advertises routes it has learned from a neighboring router in periodic updates subsequently sent to the neighbor. If 'Poisoned', the node implements poisoned reverse. The router now advertises routes learned from a neighbor in RIP updates subsequently sent to that neighbor with a hop count of wfRipBaseRipNetworkDiameter plus 1, (thus declaring the destination unreachable). If 'Split', the router implements a split-horizon, and omits routes learned from a neighbor in RIP updates subsequently sent to that neighbor. If 'Actual', the learned cost of the route is advertised." DEFVAL { poisoned } ::= { wfRipInterfaceEntry 9 } wfRipIntfCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit number of the IP interface" ::= { wfRipInterfaceEntry 10 } wfRipIntfTTL OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Time To Live in the IP Header for RIP updates" DEFVAL { 1 } ::= { wfRipInterfaceEntry 11 } wfRipIntfBroadcastTimer OBJECT-TYPE SYNTAX INTEGER(0..1209600) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to configure the frequency of full RIP updates. The default is per the standard. If DOR ( Dial Optimized Routing ) is not configured, the minimum would be every 5 seconds, with a maximum of 24 hours. If DOR is configured the minimum could be zero the maximum ( also is default ) could be two weeks (1209600);" DEFVAL { 30 } ::= { wfRipInterfaceEntry 12 } wfRipIntfTimeoutTimer OBJECT-TYPE SYNTAX INTEGER(15..3628800) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to configure the time period which RIP will wait before timing out a route. This time is typically 3 x the broadcast timer. The default is 90 seconds with a maximum of 72 hours if DOR ( Dial Optimized Routing ) is not configured. Otherwise it could be 6 weeks( 3628800 ) as maximum value and two weeks as default value ( 1209600 )." DEFVAL { 90 } ::= { wfRipInterfaceEntry 13 } wfRipIntfHolddownTimer OBJECT-TYPE SYNTAX INTEGER(15..3628800) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to configure the time period which unreachable routes will be held in the Routing Pool. This time is typically 3 x the broadcast timer. It allows RIP to advertise the unreachable routes to help convergence time. If DOR ( Dial Optimized Routing ) is configured the default value would be 1209600 two weeks , and maximum value of 3628800 ( 6 weeks )." DEFVAL { 90 } ::= { wfRipInterfaceEntry 14 } wfRipIntfCompSwitch OBJECT-TYPE SYNTAX INTEGER { rip1(1), rip2(2), aggr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to configure which mode of RIP to run. The default is to run RIP1. RIP2 mode runs RIP2. This does not do automatic aggregation of subnets like RIP1 does. RIP2_AGGR provides the automatic aggregation of subnets for RIP2." DEFVAL { rip1 } ::= { wfRipInterfaceEntry 15 } wfRipIntfTriggeredUpdates OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to configure triggered updates. By default this parameter is disabled to conform with previous release action." DEFVAL { disabled } ::= { wfRipInterfaceEntry 16 } wfRipIntfAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), simple-password(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the type of Authentication to be used with RIP. This is only valid when running RIP2" DEFVAL { none } ::= { wfRipInterfaceEntry 17 } wfRipIntfAuthentication OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Contains the authentication if the Authentication Type is set to simple password. This field contains up to 16 characters." ::= { wfRipInterfaceEntry 18 } wfRipIntfInitStabilizationTimer OBJECT-TYPE SYNTAX INTEGER(0..86400) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to cofigure the time period which RIP will use as its initial stabilization time length. It allows RIP to learn all routes from its neighbors before sending full updates." DEFVAL { 120 } ::= { wfRipInterfaceEntry 19 } wfRipIntfSVCBroadcast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether Frame Relay SVCs should be established for all adjacent hosts before sending an update." DEFVAL { disabled } ::= { wfRipInterfaceEntry 20 } wfRipIntfDefaultRouteCost OBJECT-TYPE SYNTAX INTEGER(0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the default route cost when the route is being generated. The cost is added in case the default route supply is set to enable." DEFVAL { 0 } ::= { wfRipInterfaceEntry 21 } wfRdiscIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfRdiscIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of configured RDISC interfaces" ::= { wfIpGroup 17 } wfRdiscIntfEntry OBJECT-TYPE SYNTAX WfRdiscIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a RDISC interface" INDEX { wfRdiscInterfaceIndex } ::= { wfRdiscIntfTable 1 } WfRdiscIntfEntry ::= SEQUENCE { wfRdiscInterfaceCreate INTEGER, wfRdiscInterfaceEnable INTEGER, wfRdiscInterfaceState INTEGER, wfRdiscInterfaceIndex IpAddress, wfRdiscInterfaceBcast INTEGER, wfRdiscInterfaceMinIntrvl INTEGER, wfRdiscInterfaceMaxIntrvl INTEGER, wfRdiscInterfaceLifetime INTEGER, wfRdiscInterfacePref INTEGER, wfRdiscInterfaceUnicastAdvt Counter, wfRdiscInterfaceMulticastAdvt Counter, wfRdiscInterfaceDynamicPref INTEGER } wfRdiscInterfaceCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RDISC Interface instance." DEFVAL { create } ::= { wfRdiscIntfEntry 1 } wfRdiscInterfaceEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RDISC interface." DEFVAL { enabled } ::= { wfRdiscIntfEntry 2 } wfRdiscInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpres(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of RDISC on this interface." DEFVAL { notpres } ::= { wfRdiscIntfEntry 3 } wfRdiscInterfaceIndex OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP interface to run RDISC on." ::= { wfRdiscIntfEntry 4 } wfRdiscInterfaceBcast OBJECT-TYPE SYNTAX INTEGER { mcast(1), local(2), direct(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of broadcast addr to use in sending advertisements" DEFVAL { mcast } ::= { wfRdiscIntfEntry 5 } wfRdiscInterfaceMinIntrvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Min time Interval between RDisc Advertisements (seconds)" DEFVAL { 450 } ::= { wfRdiscIntfEntry 6 } wfRdiscInterfaceMaxIntrvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Max time Interval between RDisc Advertisements (seconds)" DEFVAL { 600 } ::= { wfRdiscIntfEntry 7 } wfRdiscInterfaceLifetime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Max time Interval between RDisc Advertisements (seconds)" DEFVAL { 1800 } ::= { wfRdiscIntfEntry 8 } wfRdiscInterfacePref OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Interface preference level (Higher is more prefered" ::= { wfRdiscIntfEntry 9 } wfRdiscInterfaceUnicastAdvt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Couter for number of unicast advertisements" ::= { wfRdiscIntfEntry 10 } wfRdiscInterfaceMulticastAdvt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Couter for number of multicast advertisements" ::= { wfRdiscIntfEntry 11 } wfRdiscInterfaceDynamicPref OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Interface dynamic preference level (Higher is more prefered" ::= { wfRdiscIntfEntry 12 } wfIpAccCtrlFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpAccCtrlFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Access Control Filter Table" ::= { wfIpGroup 19 } wfIpAccCtrlFilterEntry OBJECT-TYPE SYNTAX WfIpAccCtrlFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one filter." INDEX { wfIpAccCtrlFilterIndex } ::= { wfIpAccCtrlFilterTable 1 } WfIpAccCtrlFilterEntry ::= SEQUENCE { wfIpAccCtrlFilterCreate INTEGER, wfIpAccCtrlFilterEnable INTEGER, wfIpAccCtrlFilterIndex INTEGER, wfIpAccCtrlFilterName DisplayString, wfIpAccCtrlFilterNetwork IpAddress, wfIpAccCtrlFilterNetworkMask IpAddress, wfIpAccCtrlFilterAction INTEGER, wfIpAccCtrlFilterServiceMask INTEGER, wfIpAccCtrlFilterDenyLog INTEGER, wfIpAccCtrlFilterPrecedence INTEGER, wfIpAccCtrlFilterId INTEGER } wfIpAccCtrlFilterCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Access Control Filter." DEFVAL { create } ::= { wfIpAccCtrlFilterEntry 1 } wfIpAccCtrlFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Access Control Filter." DEFVAL { enabled } ::= { wfIpAccCtrlFilterEntry 2 } wfIpAccCtrlFilterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Access Control Filter index number" ::= { wfIpAccCtrlFilterEntry 3 } wfIpAccCtrlFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Access Control Filter name - user specified name for this filter" ::= { wfIpAccCtrlFilterEntry 4 } wfIpAccCtrlFilterNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network" ::= { wfIpAccCtrlFilterEntry 5 } wfIpAccCtrlFilterNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network mask" ::= { wfIpAccCtrlFilterEntry 6 } wfIpAccCtrlFilterAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Filter action." DEFVAL { deny } ::= { wfIpAccCtrlFilterEntry 7 } wfIpAccCtrlFilterServiceMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IP upper layer services access mask. Possible values: telnet 0x01 ftp 0x02 tftp 0x04 snmp 0x08 ntp 0x10 rcmds 0x20 http 0x40 " ::= { wfIpAccCtrlFilterEntry 8 } wfIpAccCtrlFilterDenyLog OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable log parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable log message when access is denied." DEFVAL { enabled } ::= { wfIpAccCtrlFilterEntry 9 } wfIpAccCtrlFilterPrecedence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "precedence. This is a metric to be used to compare this access policy filter to other filters that a given route may match. A filter with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the filter index is used (larger wins)." ::= { wfIpAccCtrlFilterEntry 10 } wfIpAccCtrlFilterId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Filter ID. This is an assocation of the access control filter entry with the access control network entry and the access control user/host entry." ::= { wfIpAccCtrlFilterEntry 11 } wfIpAccCtrlNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpAccCtrlNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Access Control Network Entry Table" ::= { wfIpGroup 20 } wfIpAccCtrlNetworkEntry OBJECT-TYPE SYNTAX WfIpAccCtrlNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for the IP access control network table." INDEX { wfIpAccCtrlNetworkIndex } ::= { wfIpAccCtrlNetworkTable 1 } WfIpAccCtrlNetworkEntry ::= SEQUENCE { wfIpAccCtrlNetworkCreate INTEGER, wfIpAccCtrlNetworkEnable INTEGER, wfIpAccCtrlNetworkIndex INTEGER, wfIpAccCtrlNetworkNetwork IpAddress, wfIpAccCtrlNetworkNetworkMask IpAddress, wfIpAccCtrlNetworkId INTEGER } wfIpAccCtrlNetworkCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Access Control Network Filter." DEFVAL { create } ::= { wfIpAccCtrlNetworkEntry 1 } wfIpAccCtrlNetworkEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Access Control Network Filter." DEFVAL { enabled } ::= { wfIpAccCtrlNetworkEntry 2 } wfIpAccCtrlNetworkIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Access Control Network Network Filter index number" ::= { wfIpAccCtrlNetworkEntry 3 } wfIpAccCtrlNetworkNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network" ::= { wfIpAccCtrlNetworkEntry 4 } wfIpAccCtrlNetworkNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network mask" ::= { wfIpAccCtrlNetworkEntry 5 } wfIpAccCtrlNetworkId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Filter ID. This is an assocation of the access control filter entry with the access control network entry and the access control user/host entry." ::= { wfIpAccCtrlNetworkEntry 6 } wfIpAccCtrlUserHostTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpAccCtrlUserHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Access Control User Host Entry Table" ::= { wfIpGroup 21 } wfIpAccCtrlUserHostEntry OBJECT-TYPE SYNTAX WfIpAccCtrlUserHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for the IP access control user/host Table." INDEX { wfIpAccCtrlUserHostIndex } ::= { wfIpAccCtrlUserHostTable 1 } WfIpAccCtrlUserHostEntry ::= SEQUENCE { wfIpAccCtrlUserHostCreate INTEGER, wfIpAccCtrlUserHostEnable INTEGER, wfIpAccCtrlUserHostIndex INTEGER, wfIpAccCtrlUserHostUser DisplayString, wfIpAccCtrlUserHostHost DisplayString, wfIpAccCtrlUserHostId INTEGER } wfIpAccCtrlUserHostCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Access Control User/Host Filter." DEFVAL { create } ::= { wfIpAccCtrlUserHostEntry 1 } wfIpAccCtrlUserHostEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Access Control User/Host Filter." DEFVAL { enabled } ::= { wfIpAccCtrlUserHostEntry 2 } wfIpAccCtrlUserHostIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Access Control User/Host Filter index number" ::= { wfIpAccCtrlUserHostEntry 3 } wfIpAccCtrlUserHostUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The user ID" ::= { wfIpAccCtrlUserHostEntry 4 } wfIpAccCtrlUserHostHost OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The host ID" ::= { wfIpAccCtrlUserHostEntry 5 } wfIpAccCtrlUserHostId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Filter ID. This is an assocation of the access control filter entry with the access control network entry and the access control user/host entry." ::= { wfIpAccCtrlUserHostEntry 6 } wfIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's IP addresses. This table is used to directly map to the ipAddrTable in rfc1213" ::= { wfIpGroup 22 } wfIpAddrEntry OBJECT-TYPE SYNTAX WfIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's IP addresses." INDEX { wfIpAdEntAddr } ::= { wfIpAddrTable 1 } WfIpAddrEntry ::= SEQUENCE { wfIpAdEntAddr IpAddress, wfIpAdEntIfIndex INTEGER, wfIpAdEntNetMask IpAddress, wfIpAdEntBcastAddr INTEGER, wfIpAdEntReasmMaxSize INTEGER (0..65535) } wfIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { wfIpAddrEntry 1 } wfIpAdEntIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { wfIpAddrEntry 2 } wfIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { wfIpAddrEntry 3 } wfIpAdEntBcastAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface." ::= { wfIpAddrEntry 4 } wfIpAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { wfIpAddrEntry 5 } wfIpInternalHostTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpInternalHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of internal IP hosts. Maintains counts of received, delivered and reassembled packets." ::= { wfIpGroup 23 } wfIpInternalHostEntry OBJECT-TYPE SYNTAX WfIpInternalHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An internal host table entry." INDEX { wfIpInternHtIpAddress } ::= { wfIpInternalHostTable 1 } WfIpInternalHostEntry ::= SEQUENCE { wfIpInternHtIpAddress IpAddress, wfIpInternHtReceives Counter, wfIpInternHtInDelivers Counter, wfIpInternHtUnknownProtos Counter, wfIpInternHtReasmReqds Counter, wfIpInternHtReasmFails Counter, wfIpInternHtReasmOKs Counter, wfIpInternHtInHdrErrors Counter } wfIpInternHtIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of the internal host." ::= { wfIpInternalHostEntry 1 } wfIpInternHtReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of datagrams received by the internal host." ::= { wfIpInternalHostEntry 2 } wfIpInternHtInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets delivered to reassmbly clients." ::= { wfIpInternalHostEntry 3 } wfIpInternHtUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets for which there was no client to deliver to." ::= { wfIpInternalHostEntry 4 } wfIpInternHtReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments received which needed to be reassembled at this internal host." ::= { wfIpInternalHostEntry 5 } wfIpInternHtReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { wfIpInternalHostEntry 6 } wfIpInternHtReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams successfully reassembled." ::= { wfIpInternalHostEntry 7 } wfIpInternHtInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams with errors in IP headers." ::= { wfIpInternalHostEntry 8 } wfIpIntfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpIntfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of configured IP interface stats" ::= { wfIpGroup 25 } wfIpIntfStatsEntry OBJECT-TYPE SYNTAX WfIpIntfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An IP stats interface description" INDEX { wfIpIntfStatsAddr, wfIpIntfStatsCircuit } ::= { wfIpIntfStatsTable 1 } WfIpIntfStatsEntry ::= SEQUENCE { wfIpIntfStatsAddr IpAddress, wfIpIntfStatsCircuit INTEGER, wfIpIntfStatsReasmMaxSize Gauge, wfIpIntfStatsMaxInfo INTEGER, wfIpIntfStatsInReceives Counter, wfIpIntfStatsInHdrErrors Counter, wfIpIntfStatsInAddrErrors Counter, wfIpIntfStatsForwDatagrams Counter, wfIpIntfStatsInUnknownProtos Counter, wfIpIntfStatsInDiscards Counter, wfIpIntfStatsInDelivers Counter, wfIpIntfStatsOutRequests Counter, wfIpIntfStatsOutDiscards Counter, wfIpIntfStatsOutNoRoutes Counter, wfIpIntfStatsReasmTimeout INTEGER, wfIpIntfStatsReasmReqds Counter, wfIpIntfStatsReasmOKs Counter, wfIpIntfStatsReasmFails Counter, wfIpIntfStatsFragOKs Counter, wfIpIntfStatsFragFails Counter, wfIpIntfStatsFragCreates Counter, wfIpIntfStatsCacheMisses Counter, wfIpIntfStatsCacheNetworks Gauge, wfIpIntfStatsCacheRemoves Counter, wfIpIntfStatsDropRxAuths Counter, wfIpIntfStatsDropRxFormats Counter, wfIpIntfStatsDropRxLevels Counter, wfIpIntfStatsDropRxNoIpsos Counter, wfIpIntfStatsDropTxAuths Counter, wfIpIntfStatsDropTxLevels Counter, wfIpIntfStatsDropTxNoIpsos Counter, wfIpIntfStatsDropTxNoIpsoRooms Counter, wfIpIntfStatsRoutingDiscards Counter, wfIpIntfStatsAtmArpAttemptedCalls Counter, wfIpIntfStatsAtmArpFailRetryCalls Counter, wfIpIntfStatsAtmArpFailNoRetryCalls Counter, wfIpIntfStatsAtmArpSuccessfulCalls Counter, wfIpIntfStatsAtmArpAcceptedCalls Counter, wfIpIntfStatsAtmArpOpenSvcs Counter, wfIpIntfStatsMcastInPkts Counter, wfIpIntfStatsMcastOutPkts Counter, wfIpIntfStatsMcastInDataPkts Counter, wfIpIntfStatsControlPathInPkts Counter, wfIpIntfStatsControlPathOutPkts Counter } wfIpIntfStatsAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address to which this entry's addressing information pertains" ::= { wfIpIntfStatsEntry 1 } wfIpIntfStatsCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Circuit Number that this interface runs over" ::= { wfIpIntfStatsEntry 2 } wfIpIntfStatsReasmMaxSize OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { wfIpIntfStatsEntry 3 } wfIpIntfStatsMaxInfo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum size of the INFO (non-MAC) field that this port will receive or transmit." ::= { wfIpIntfStatsEntry 4 } wfIpIntfStatsInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { wfIpIntfStatsEntry 5 } wfIpIntfStatsInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { wfIpIntfStatsEntry 6 } wfIpIntfStatsInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { wfIpIntfStatsEntry 7 } wfIpIntfStatsForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { wfIpIntfStatsEntry 8 } wfIpIntfStatsInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { wfIpIntfStatsEntry 9 } wfIpIntfStatsInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { wfIpIntfStatsEntry 10 } wfIpIntfStatsInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { wfIpIntfStatsEntry 11 } wfIpIntfStatsOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { wfIpIntfStatsEntry 12 } wfIpIntfStatsOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { wfIpIntfStatsEntry 13 } wfIpIntfStatsOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down." ::= { wfIpIntfStatsEntry 14 } wfIpIntfStatsReasmTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity." ::= { wfIpIntfStatsEntry 15 } wfIpIntfStatsReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments received which needed to be reassembled at this entity." ::= { wfIpIntfStatsEntry 16 } wfIpIntfStatsReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams successfully reassembled." ::= { wfIpIntfStatsEntry 17 } wfIpIntfStatsReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { wfIpIntfStatsEntry 18 } wfIpIntfStatsFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been successfully fragmented at this entity." ::= { wfIpIntfStatsEntry 19 } wfIpIntfStatsFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { wfIpIntfStatsEntry 20 } wfIpIntfStatsFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagram fragments that have been generated as a result of fragmentation at this entity." ::= { wfIpIntfStatsEntry 21 } wfIpIntfStatsCacheMisses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of FFT cache misses (i.e how many times did the cache gate have to do a look up in the RNP because the FFT didn't have the destination network" ::= { wfIpIntfStatsEntry 22 } wfIpIntfStatsCacheNetworks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Between 0 and wfIpInterfaceFwdCacheSize" ::= { wfIpIntfStatsEntry 23 } wfIpIntfStatsCacheRemoves OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of networks which have been flushed from the FFT because of aging" ::= { wfIpIntfStatsEntry 24 } wfIpIntfStatsDropRxAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the flags other than the 'may' flags were specified." ::= { wfIpIntfStatsEntry 25 } wfIpIntfStatsDropRxFormats OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received packets dropped because the security option format was invalid." ::= { wfIpIntfStatsEntry 26 } wfIpIntfStatsDropRxLevels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received packets dropped because the classification level was out of range." ::= { wfIpIntfStatsEntry 27 } wfIpIntfStatsDropRxNoIpsos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received packets dropped because no IP security label was present." ::= { wfIpIntfStatsEntry 28 } wfIpIntfStatsDropTxAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the flags other than the 'may' flags were specified." ::= { wfIpIntfStatsEntry 29 } wfIpIntfStatsDropTxLevels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted packets dropped because the classification level was out of range." ::= { wfIpIntfStatsEntry 30 } wfIpIntfStatsDropTxNoIpsos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets not transmitted because no IP security label was present." ::= { wfIpIntfStatsEntry 31 } wfIpIntfStatsDropTxNoIpsoRooms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets not transmitted because there was not enough space left in the IP header to insert an IP security option." ::= { wfIpIntfStatsEntry 32 } wfIpIntfStatsRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid" ::= { wfIpIntfStatsEntry 33 } wfIpIntfStatsAtmArpAttemptedCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of calls ATMARP has attempted" ::= { wfIpIntfStatsEntry 34 } wfIpIntfStatsAtmArpFailRetryCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of attempted calls that have failed, but were retried" ::= { wfIpIntfStatsEntry 35 } wfIpIntfStatsAtmArpFailNoRetryCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of attempted calls that have failed, and were not retried" ::= { wfIpIntfStatsEntry 36 } wfIpIntfStatsAtmArpSuccessfulCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of originated calls completed successfully" ::= { wfIpIntfStatsEntry 37 } wfIpIntfStatsAtmArpAcceptedCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of received calls that were accepted" ::= { wfIpIntfStatsEntry 38 } wfIpIntfStatsAtmArpOpenSvcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of currently open calls" ::= { wfIpIntfStatsEntry 39 } wfIpIntfStatsMcastInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast packets received by the interface" ::= { wfIpIntfStatsEntry 40 } wfIpIntfStatsMcastOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "the number of multicast packets transmitted by the interface" ::= { wfIpIntfStatsEntry 41 } wfIpIntfStatsMcastInDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast data packets received by the interface" ::= { wfIpIntfStatsEntry 42 } wfIpIntfStatsControlPathInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "the number of control path packets received by the interface" ::= { wfIpIntfStatsEntry 43 } wfIpIntfStatsControlPathOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "the number of control path packets transmitted by the interface" ::= { wfIpIntfStatsEntry 44 } wfIpIntfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpIntfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of configured IP interface " ::= { wfIpGroup 24 } wfIpIntfCfgEntry OBJECT-TYPE SYNTAX WfIpIntfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An IP cfg interface description" INDEX { wfIpIntfCfgAddr, wfIpIntfCfgCircuit } ::= { wfIpIntfCfgTable 1 } WfIpIntfCfgEntry ::= SEQUENCE { wfIpIntfCfgAddr IpAddress, wfIpIntfCfgCircuit INTEGER, wfIpIntfCfgCreate INTEGER, wfIpIntfCfgEnable INTEGER, wfIpIntfCfgState INTEGER, wfIpIntfCfgMask IpAddress, wfIpIntfCfgCost INTEGER, wfIpIntfCfgCfgBcastAddr IpAddress, wfIpIntfCfgBcastAddr IpAddress, wfIpIntfCfgCfgMacAddress OCTET STRING, wfIpIntfCfgMacAddress OCTET STRING, wfIpIntfCfgMTUDiscovery INTEGER, wfIpIntfCfgAMR INTEGER, wfIpIntfCfgASB INTEGER, wfIpIntfCfgAddressResolutionType INTEGER, wfIpIntfCfgProxy INTEGER, wfIpIntfCfgHostCache INTEGER, wfIpIntfCfgUdpXsumOn INTEGER, wfIpIntfCfgTrEndStation INTEGER, wfIpIntfCfgSMDSGroupAddress OCTET STRING, wfIpIntfCfgSMDSArpReqAddress OCTET STRING, wfIpIntfCfgFRBcastDlci INTEGER, wfIpIntfCfgFRMcast1Dlci INTEGER, wfIpIntfCfgFRMcast2Dlci INTEGER, wfIpIntfCfgRedirect INTEGER, wfIpIntfCfgEnetArpEncaps INTEGER, wfIpIntfCfgSlotMask Gauge, wfIpIntfCfgEnableSecurity INTEGER, wfIpIntfCfgStripSecurity INTEGER, wfIpIntfCfgRequireOutSecurity INTEGER, wfIpIntfCfgRequireInSecurity INTEGER, wfIpIntfCfgMinLevel INTEGER, wfIpIntfCfgMaxLevel INTEGER, wfIpIntfCfgMustOutAuthority OCTET STRING, wfIpIntfCfgMayOutAuthority OCTET STRING, wfIpIntfCfgMustInAuthority OCTET STRING, wfIpIntfCfgMayInAuthority OCTET STRING, wfIpIntfCfgImplicitLabelEnabled INTEGER, wfIpIntfCfgImplicitAuth OCTET STRING, wfIpIntfCfgImplicitLevel INTEGER, wfIpIntfCfgDefaultLabelEnabled INTEGER, wfIpIntfCfgDefaultAuth OCTET STRING, wfIpIntfCfgDefaultLevel INTEGER, wfIpIntfCfgErrorLabelEnabled INTEGER, wfIpIntfCfgErrorAuth OCTET STRING, wfIpIntfCfgFwdCacheSize INTEGER, wfIpIntfCfgUnnumAsocAddr IpAddress, wfIpIntfCfgUnnumAsocAlt INTEGER, wfIpIntfCfgAtmArpMode INTEGER, wfIpIntfCfgAtmArpSrvAddress OCTET STRING, wfIpIntfCfgAtmArpSrvVcAgingEnable INTEGER, wfIpIntfCfgAtmArpSrvRegInterval INTEGER, wfIpIntfCfgAtmArpMisc INTEGER, wfIpIntfCfgAtmArpMisc2 INTEGER, wfIpIntfCfgAtmArpSrvConnState INTEGER, wfIpIntfCfgTrEsArpType INTEGER, wfIpIntfCfgMprMode INTEGER, wfIpIntfCfgMprState INTEGER, wfIpIntfCfgIPSecEnable INTEGER, wfIpIntfCfgIPSecLogLevel INTEGER, wfIpIntfCfgTosTemplate INTEGER, wfIpIntfCfgMsgLevel INTEGER, wfIpIntfCfgMtu INTEGER, wfIpIntfCfgDropIpMacBroadcast INTEGER } wfIpIntfCfgCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface." DEFVAL { create } ::= { wfIpIntfCfgEntry 1 } wfIpIntfCfgEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface." DEFVAL { enabled } ::= { wfIpIntfCfgEntry 2 } wfIpIntfCfgState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), invalid(4), notpres(5) } ACCESS read-only STATUS mandatory DESCRIPTION "INvalid indicates an error in processing the cfg record" DEFVAL { notpres } ::= { wfIpIntfCfgEntry 3 } wfIpIntfCfgAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address to which this entry's addressing information pertains" ::= { wfIpIntfCfgEntry 4 } wfIpIntfCfgCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Circuit Number that this interface runs over" ::= { wfIpIntfCfgEntry 5 } wfIpIntfCfgMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { wfIpIntfCfgEntry 6 } wfIpIntfCfgCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Cost metric associated with the IP Address of this entry " DEFVAL { 1 } ::= { wfIpIntfCfgEntry 7 } wfIpIntfCfgCfgBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The user can specifcy a broadcast address for a NWIF" ::= { wfIpIntfCfgEntry 8 } wfIpIntfCfgBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. This is value used by the software" ::= { wfIpIntfCfgEntry 9 } wfIpIntfCfgCfgMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The desired mac set by the user" ::= { wfIpIntfCfgEntry 10 } wfIpIntfCfgMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The MAC Address for this Interface- actual one used" ::= { wfIpIntfCfgEntry 11 } wfIpIntfCfgMTUDiscovery OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether MTU discovery option is on/off" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 12 } wfIpIntfCfgAMR OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether Address Mask Reply is ON/OFF" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 13 } wfIpIntfCfgASB OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 14 } wfIpIntfCfgAddressResolutionType OBJECT-TYPE SYNTAX INTEGER { arp(1), ddn(3), pdn(4), in-arp(5), arp-in-arp(6), none(7), bfe-ddn(8), probe(9), arp-probe(10), atm-arp(11) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates which Address Resolution Type to use" DEFVAL { arp } ::= { wfIpIntfCfgEntry 15 } wfIpIntfCfgProxy OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Whether Proxy is on this Interface or not" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 16 } wfIpIntfCfgHostCache OBJECT-TYPE SYNTAX INTEGER { cache-off(1), cache-120(120), cache-180(180), cache-240(240), cache-300(300), cache-600(600), cache-900(900), cache-1200(1200) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age" DEFVAL { cache-off } ::= { wfIpIntfCfgEntry 17 } wfIpIntfCfgUdpXsumOn OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 18 } wfIpIntfCfgTrEndStation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Use Source Routing over token ring selection. Only applies if pam type is TRING." DEFVAL { disabled } ::= { wfIpIntfCfgEntry 19 } wfIpIntfCfgSMDSGroupAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The SMDS group address" ::= { wfIpIntfCfgEntry 20 } wfIpIntfCfgSMDSArpReqAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The SMDS arp req address" ::= { wfIpIntfCfgEntry 21 } wfIpIntfCfgFRBcastDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay broadcast dlci" ::= { wfIpIntfCfgEntry 22 } wfIpIntfCfgFRMcast1Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay multicast dlci #1" ::= { wfIpIntfCfgEntry 23 } wfIpIntfCfgFRMcast2Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay multicast dlci #2" ::= { wfIpIntfCfgEntry 24 } wfIpIntfCfgRedirect OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Whether we're sending out redirects on this Interface or not" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 25 } wfIpIntfCfgEnetArpEncaps OBJECT-TYPE SYNTAX INTEGER { enet(1), snap(2), both(3), probelsap(4), probeenet(5), probeboth(6), arpenetprobelsap(7), arpsnapprobelsap(8), arpbothprobelsap(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The data link encapsulation type to use for ARP packets if the the media is ethernet." DEFVAL { enet } ::= { wfIpIntfCfgEntry 26 } wfIpIntfCfgSlotMask OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. This is only valid if wfIpInterfaceCircuit is 0." DEFVAL { 4294705152 } ::= { wfIpIntfCfgEntry 27 } wfIpIntfCfgEnableSecurity OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables RIPSO on this interface" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 28 } wfIpIntfCfgStripSecurity OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2), all(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines which packets will have security option removed. This is a bit mask." ::= { wfIpIntfCfgEntry 29 } wfIpIntfCfgRequireOutSecurity OBJECT-TYPE SYNTAX INTEGER { forwarded(1), originated(2), all(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines which types of outbound packets are required to have a security option. This is a bit mask." DEFVAL { all } ::= { wfIpIntfCfgEntry 30 } wfIpIntfCfgRequireInSecurity OBJECT-TYPE SYNTAX INTEGER { yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not incoming packets must have security option. This is a bit mask." ::= { wfIpIntfCfgEntry 31 } wfIpIntfCfgMinLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the minimum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpIntfCfgEntry 32 } wfIpIntfCfgMaxLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the maximum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { topsecret } ::= { wfIpIntfCfgEntry 33 } wfIpIntfCfgMustOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that must be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE." ::= { wfIpIntfCfgEntry 34 } wfIpIntfCfgMayOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that may be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL." ::= { wfIpIntfCfgEntry 35 } wfIpIntfCfgMustInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that must be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE." ::= { wfIpIntfCfgEntry 36 } wfIpIntfCfgMayInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that may be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL." ::= { wfIpIntfCfgEntry 37 } wfIpIntfCfgImplicitLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should an implicit label be associated with any inbound unlabelled datagrams?" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 38 } wfIpIntfCfgImplicitAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits in the implicit label associated with an unlabelled inbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if implicit labelling is enabled (wfIpIntfImplicitLabelEnabled =IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and implicit labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpIntfCfgEntry 39 } wfIpIntfCfgImplicitLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the classification level byte in the implicit label associated with an unlabelled inbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpIntfCfgEntry 40 } wfIpIntfCfgDefaultLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should a default label be associated with any not-yet-labelled oubound datagrams?" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 41 } wfIpIntfCfgDefaultAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits in the default label associated with a not-yet-labelled outbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if default labelling is enabled (wfIpInterfaceDefaultLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and default labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpIntfCfgEntry 42 } wfIpIntfCfgDefaultLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the classification level byte to use in the default label associated with a not-yet-labelled outbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpIntfCfgEntry 43 } wfIpIntfCfgErrorLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should an error label be associated with any outbound ICMP error packets?" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 44 } wfIpIntfCfgErrorAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits in the error label associated with any outbount ICMP error packets. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if error labelling is enabled (wfIpInterfaceError LabelEnabled = IP_NWIF_LABEL_ENABLED ). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and error labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE " ::= { wfIpIntfCfgEntry 45 } wfIpIntfCfgFwdCacheSize OBJECT-TYPE SYNTAX INTEGER(64..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of entries allowed in the Forwarding Table at one time. There is a forwarding table per interface." DEFVAL { 128 } ::= { wfIpIntfCfgEntry 46 } wfIpIntfCfgUnnumAsocAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Associated IP address used by unnumbered interfaces when sourcing a packet. Rip also uses this attribute to make decisions about advertising subnets over unnumbered interfaces. Rip will advertise subnets over the unnumbered interface if they have the same mask as the associated address." ::= { wfIpIntfCfgEntry 47 } wfIpIntfCfgUnnumAsocAlt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable the option to automatically assign an alternate unnumbered associated address in the event that the primary associated address interface has gone down" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 48 } wfIpIntfCfgAtmArpMode OBJECT-TYPE SYNTAX INTEGER { client(1), server(2), none(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether ATMARP is a client or running as a server. A value of 'none' is for ATM WAN SVCs feature" DEFVAL { client } ::= { wfIpIntfCfgEntry 49 } wfIpIntfCfgAtmArpSrvAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The ATMARP server address" ::= { wfIpIntfCfgEntry 50 } wfIpIntfCfgAtmArpSrvVcAgingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the ATMARP server VC should be aged (for client operation)" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 51 } wfIpIntfCfgAtmArpSrvRegInterval OBJECT-TYPE SYNTAX INTEGER { client-default(900), server-default(1200) } ACCESS read-write STATUS mandatory DESCRIPTION "For client operation, the interval between registration refreshes. For a server. this will be the duration a registration is valid. (in seconds)" DEFVAL { client-default } ::= { wfIpIntfCfgEntry 52 } wfIpIntfCfgAtmArpMisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Not in use." ::= { wfIpIntfCfgEntry 53 } wfIpIntfCfgAtmArpMisc2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Not in use." ::= { wfIpIntfCfgEntry 54 } wfIpIntfCfgAtmArpSrvConnState OBJECT-TYPE SYNTAX INTEGER { init(1), wereserver(2), noservercfg(1028), closednotreg(4), openingnotreg(20), opennotregxxx(36), openfailnotreg(52), closedregingxxx(260), openingregingxxx(276), openreging(292), openfailregingxxx(308), closedreg(516), openingreg(532), openreg(548), openfailreg(564), closedregfail(772), openingregfail(788), openregfailxxx(804), openfailregfail(820), closednotregarp(12), openingnotregarp(28), opennotregarpxxx(44), openfailnotregarp(60), closedregingarpxxx(268), openingregingarpxxx(284), openregingarp(300), openfailregingarpxxx(316), closedregarp(524), openingregarp(540), openregarpxxx(556), openfailregarp(572), closedregfailarp(780), openingregfailarp(796), openregfailarpxxx(812), openfailregfailarp(828) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the connection to the ATMARP server. This field should be interpreted as follows (bit 31 is msb, bit 0 is lsb): bits 0-3 are bits for determining ATMARP initialization, client/server, and if the client has ARP requests to send to the server: 0x001 INIT 0x002 WERESERVER 0x--4 CLIENT 0x--8 HAVEARPTOSEND bits 4-7 represent the state of the VC to the server: 0x-0- CLOSED 0x-1- OPENING 0x-2- OPEN 0x-3- OPENFAILED bits 8-11 represent the state of registration to the server: 0x0-- NOTREGISTERED 0x1-- REGISTERING 0x2-- REGISTERED 0x3-- REGISTRATIONFAILED 0x4-- NOSERVER" DEFVAL { init } ::= { wfIpIntfCfgEntry 55 } wfIpIntfCfgTrEsArpType OBJECT-TYPE SYNTAX INTEGER { ste(1), are(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Token Ring End Station ARP type ARE / STE" DEFVAL { ste } ::= { wfIpIntfCfgEntry 56 } wfIpIntfCfgMprMode OBJECT-TYPE SYNTAX INTEGER { none(1), translate(2), replicate(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Multicast Packet Replicator activation mode" DEFVAL { none } ::= { wfIpIntfCfgEntry 57 } wfIpIntfCfgMprState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), invalid(4), notpres(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Invalid indicates an error in processing the MPR record" DEFVAL { notpres } ::= { wfIpIntfCfgEntry 58 } wfIpIntfCfgIPSecEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this IP interface is enabled for IPSec, it will provide security services to IP packets forwarded through this interface as well as IPSec packets meant for this interface." DEFVAL { disabled } ::= { wfIpIntfCfgEntry 59 } wfIpIntfCfgIPSecLogLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "32-bit integer used to tune the level of IPSec logging." DEFVAL { 0 } ::= { wfIpIntfCfgEntry 60 } wfIpIntfCfgTosTemplate OBJECT-TYPE SYNTAX INTEGER { none(1), rfc791-precedence(2) } ACCESS read-write STATUS obsolete DESCRIPTION "The instance ID of the ToS template (from wfIpTosTemplateTable being used by this interface" DEFVAL { none } ::= { wfIpIntfCfgEntry 61 } wfIpIntfCfgMsgLevel OBJECT-TYPE SYNTAX INTEGER { all(2031616), debug(65536), info(131072), warning(262144), fault(524288), trace(1048576), infofaultwarning(917504) } ACCESS read-write STATUS mandatory DESCRIPTION "IP Interface log messages level. To control level of log messages DBG_MSG_ALL 0x001f0000 - 2031616 DBG_MSG_DEBUG 0x00010000 - 65536 DBG_MSG_INFO 0x00020000 - 131072 DBG_MSG_WARNING 0x00040000 - 262144 DBG_MSG_FAULT 0x00080000 - 524288 DBG_MSG_TRACE 0x00100000 - 1048576" DEFVAL { infofaultwarning } ::= { wfIpIntfCfgEntry 62 } wfIpIntfCfgMtu OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Allows user to configure the MTU of the interface. The actual MTU used by the interface will be the minimum value of this parameter and the underlying circuit's MTU." DEFVAL { 0 } ::= { wfIpIntfCfgEntry 63 } wfIpIntfCfgDropIpMacBroadcast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable /disable parameter for interface to drop IP packets which were broadcasted at the ethernet level" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 64 } wfIpIntfStatsIcmpTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpIntfStatsIcmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of configured IP icmp stats interface " ::= { wfIpGroup 26 } wfIpIntfStatsIcmpEntry OBJECT-TYPE SYNTAX WfIpIntfStatsIcmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An IP interface icmp stats description" INDEX { wfIpIntfStatsIcmpAddr, wfIpIntfStatsIcmpCircuit } ::= { wfIpIntfStatsIcmpTable 1 } WfIpIntfStatsIcmpEntry ::= SEQUENCE { wfIpIntfStatsIcmpAddr IpAddress, wfIpIntfStatsIcmpCircuit INTEGER, wfIpIntfStatsIcmpInMsgs Counter, wfIpIntfStatsIcmpInErrors Counter, wfIpIntfStatsIcmpInDestUnreachs Counter, wfIpIntfStatsIcmpInTimeExcds Counter, wfIpIntfStatsIcmpInParmProbs Counter, wfIpIntfStatsIcmpInSrcQuenchs Counter, wfIpIntfStatsIcmpInRedirects Counter, wfIpIntfStatsIcmpInEchos Counter, wfIpIntfStatsIcmpInEchoReps Counter, wfIpIntfStatsIcmpInTimestamps Counter, wfIpIntfStatsIcmpInTimestampReps Counter, wfIpIntfStatsIcmpInAddrMasks Counter, wfIpIntfStatsIcmpInAddrMaskReps Counter, wfIpIntfStatsIcmpOutMsgs Counter, wfIpIntfStatsIcmpOutErrors Counter, wfIpIntfStatsIcmpOutDestUnreachs Counter, wfIpIntfStatsIcmpOutTimeExcds Counter, wfIpIntfStatsIcmpOutParmProbs Counter, wfIpIntfStatsIcmpOutSrcQuenchs Counter, wfIpIntfStatsIcmpOutRedirects Counter, wfIpIntfStatsIcmpOutEchos Counter, wfIpIntfStatsIcmpOutEchoReps Counter, wfIpIntfStatsIcmpOutTimestamps Counter, wfIpIntfStatsIcmpOutTimestampReps Counter, wfIpIntfStatsIcmpOutAddrMasks Counter, wfIpIntfStatsIcmpOutAddrMaskReps Counter, wfIpIntfStatsIcmpInAdminProhib Counter, wfIpIntfStatsIcmpOutAdminProhib Counter, wfIpIntfStatsIcmpInRdiscSolicit Counter, wfIpIntfStatsIcmpInRdiscAdvert Counter, wfIpIntfStatsIcmpOutRdiscAdvert Counter } wfIpIntfStatsIcmpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address to which this entry's addressing information pertains" ::= { wfIpIntfStatsIcmpEntry 1 } wfIpIntfStatsIcmpCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Circuit Number that this interface runs over" ::= { wfIpIntfStatsIcmpEntry 2 } wfIpIntfStatsIcmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which includes all those counted by wfIpInterfaceIcmpInErrors." ::= { wfIpIntfStatsIcmpEntry 3 } wfIpIntfStatsIcmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { wfIpIntfStatsIcmpEntry 4 } wfIpIntfStatsIcmpInDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { wfIpIntfStatsIcmpEntry 5 } wfIpIntfStatsIcmpInTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { wfIpIntfStatsIcmpEntry 6 } wfIpIntfStatsIcmpInParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { wfIpIntfStatsIcmpEntry 7 } wfIpIntfStatsIcmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages received." ::= { wfIpIntfStatsIcmpEntry 8 } wfIpIntfStatsIcmpInRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages received." ::= { wfIpIntfStatsIcmpEntry 9 } wfIpIntfStatsIcmpInEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { wfIpIntfStatsIcmpEntry 10 } wfIpIntfStatsIcmpInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { wfIpIntfStatsIcmpEntry 11 } wfIpIntfStatsIcmpInTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages received." ::= { wfIpIntfStatsIcmpEntry 12 } wfIpIntfStatsIcmpInTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages received." ::= { wfIpIntfStatsIcmpEntry 13 } wfIpIntfStatsIcmpInAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages received." ::= { wfIpIntfStatsIcmpEntry 14 } wfIpIntfStatsIcmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages received." ::= { wfIpIntfStatsIcmpEntry 15 } wfIpIntfStatsIcmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { wfIpIntfStatsIcmpEntry 16 } wfIpIntfStatsIcmpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { wfIpIntfStatsIcmpEntry 17 } wfIpIntfStatsIcmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { wfIpIntfStatsIcmpEntry 18 } wfIpIntfStatsIcmpOutTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { wfIpIntfStatsIcmpEntry 19 } wfIpIntfStatsIcmpOutParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { wfIpIntfStatsIcmpEntry 20 } wfIpIntfStatsIcmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages sent." ::= { wfIpIntfStatsIcmpEntry 21 } wfIpIntfStatsIcmpOutRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { wfIpIntfStatsIcmpEntry 22 } wfIpIntfStatsIcmpOutEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { wfIpIntfStatsIcmpEntry 23 } wfIpIntfStatsIcmpOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { wfIpIntfStatsIcmpEntry 24 } wfIpIntfStatsIcmpOutTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages sent." ::= { wfIpIntfStatsIcmpEntry 25 } wfIpIntfStatsIcmpOutTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages sent." ::= { wfIpIntfStatsIcmpEntry 26 } wfIpIntfStatsIcmpOutAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages sent." ::= { wfIpIntfStatsIcmpEntry 27 } wfIpIntfStatsIcmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { wfIpIntfStatsIcmpEntry 28 } wfIpIntfStatsIcmpInAdminProhib OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ICMP dest unreachable/communication administratively prohibited messages received. Note: may be sent by BFE or another system" ::= { wfIpIntfStatsIcmpEntry 29 } wfIpIntfStatsIcmpOutAdminProhib OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ICMP dest unreachable/communication administratively prohibited messages sent." ::= { wfIpIntfStatsIcmpEntry 30 } wfIpIntfStatsIcmpInRdiscSolicit OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Router Discovery Solicit messages received." ::= { wfIpIntfStatsIcmpEntry 31 } wfIpIntfStatsIcmpInRdiscAdvert OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Router Discovery Advertisement messages received." ::= { wfIpIntfStatsIcmpEntry 32 } wfIpIntfStatsIcmpOutRdiscAdvert OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { wfIpIntfStatsIcmpEntry 33 } wfIpFilterRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpFilterRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Definition of filter rules" ::= { wfIpGroup 29 } wfIpFilterRuleEntry OBJECT-TYPE SYNTAX WfIpFilterRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the definition of a traffic filter" INDEX { wfIpFilterRuleNumber, wfIpFilterRuleFragment } ::= { wfIpFilterRuleTable 1 } WfIpFilterRuleEntry ::= SEQUENCE { wfIpFilterRuleCreate INTEGER, wfIpFilterRuleNumber INTEGER, wfIpFilterRuleName DisplayString, wfIpFilterRuleDescription Opaque, wfIpFilterRuleFragment INTEGER, wfIpFilterRuleNewTosValue INTEGER, wfIpFilterRuleNewTosValueMask INTEGER, wfIpFilterRuleAction INTEGER, wfIpFilterRuleClassifyAction INTEGER, wfIpFilterRuleDropPreference INTEGER } wfIpFilterRuleCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The row (object) creation/deletion attribute for this filter" DEFVAL { created } ::= { wfIpFilterRuleEntry 1 } wfIpFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The rule number for this rule." ::= { wfIpFilterRuleEntry 2 } wfIpFilterRuleName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of this filter rule." ::= { wfIpFilterRuleEntry 3 } wfIpFilterRuleDescription OBJECT-TYPE SYNTAX Opaque ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfIpFilterRuleEntry 4 } wfIpFilterRuleFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number for large rules." ::= { wfIpFilterRuleEntry 5 } wfIpFilterRuleNewTosValue OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The new TOS value to apply to packets that match the filter." ::= { wfIpFilterRuleEntry 6 } wfIpFilterRuleNewTosValueMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The mask to apply to the new TOS value to not change other bits in the TOS field." ::= { wfIpFilterRuleEntry 7 } wfIpFilterRuleAction OBJECT-TYPE SYNTAX INTEGER { drop(1), accept(2), forwardtohost(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to take if the packet matches the filter." DEFVAL { accept } ::= { wfIpFilterRuleEntry 8 } wfIpFilterRuleClassifyAction OBJECT-TYPE SYNTAX INTEGER (0..7 | 99) ACCESS read-write STATUS mandatory DESCRIPTION "The action to take to classify the packet if it matches the filter." DEFVAL { 99 } ::= { wfIpFilterRuleEntry 9 } wfIpFilterRuleDropPreference OBJECT-TYPE SYNTAX INTEGER(0..1 | 99) ACCESS read-write STATUS mandatory DESCRIPTION "The drop preference for packets matching this rule." DEFVAL { 99 } ::= { wfIpFilterRuleEntry 10 } wfIpFilterConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpFilterConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration information for IP Traffic Filters" ::= { wfIpGroup 30 } wfIpFilterConfigEntry OBJECT-TYPE SYNTAX WfIpFilterConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A traffic filter definition of configuration information" INDEX { wfIpFilterConfigInterface, wfIpFilterConfigCircuit, wfIpFilterConfigIndex } ::= { wfIpFilterConfigTable 1 } WfIpFilterConfigEntry ::= SEQUENCE { wfIpFilterConfigCreate INTEGER, wfIpFilterConfigEnable INTEGER, wfIpFilterConfigStatus INTEGER, wfIpFilterConfigRuleNumber INTEGER, wfIpFilterConfigRulePrecedence INTEGER, wfIpFilterConfigFilterType INTEGER, wfIpFilterConfigLogFilterInfo INTEGER, wfIpFilterConfigReserved INTEGER, wfIpFilterConfigInterface IpAddress, wfIpFilterConfigCircuit INTEGER, wfIpFilterConfigIndex INTEGER } wfIpFilterConfigCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists deleted - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfIpFilterConfigEntry 1 } wfIpFilterConfigEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfIpFilterConfigEntry 2 } wfIpFilterConfigStatus OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfIpFilterConfigEntry 3 } wfIpFilterConfigRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the rule from the table wfIpFilterRuleEntry." ::= { wfIpFilterConfigEntry 4 } wfIpFilterConfigRulePrecedence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The precedence of this rule in relation to other rules configured for this interface." ::= { wfIpFilterConfigEntry 5 } wfIpFilterConfigFilterType OBJECT-TYPE SYNTAX INTEGER { in(1), out(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of filter." DEFVAL { in } ::= { wfIpFilterConfigEntry 6 } wfIpFilterConfigLogFilterInfo OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled, this attribute will log a message to the log with information about the filter." DEFVAL { disabled } ::= { wfIpFilterConfigEntry 7 } wfIpFilterConfigReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfIpFilterConfigEntry 8 } wfIpFilterConfigInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address of the IP interface to which this filter is applied." ::= { wfIpFilterConfigEntry 9 } wfIpFilterConfigCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the Circuit to which the filter is applied." ::= { wfIpFilterConfigEntry 10 } wfIpFilterConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for the rule." ::= { wfIpFilterConfigEntry 11 } wfIpFilterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpFilterStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistical information for IP Traffic Filters" ::= { wfIpGroup 31 } wfIpFilterStatsEntry OBJECT-TYPE SYNTAX WfIpFilterStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A traffic filter definition of statistical information" INDEX { wfIpFilterStatsInterface, wfIpFilterStatsCircuit, wfIpFilterStatsIndex } ::= { wfIpFilterStatsTable 1 } WfIpFilterStatsEntry ::= SEQUENCE { wfIpFilterStatsCounter Counter, wfIpFilterStatsInterface IpAddress, wfIpFilterStatsCircuit INTEGER, wfIpFilterStatsIndex INTEGER } wfIpFilterStatsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfIpFilterStatsEntry 1 } wfIpFilterStatsInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address of the IP interface to which this filter is applied." ::= { wfIpFilterStatsEntry 2 } wfIpFilterStatsCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the Circuit to which the filter is applied." ::= { wfIpFilterStatsEntry 3 } wfIpFilterStatsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for the rule." ::= { wfIpFilterStatsEntry 4 } -- Configuration table for ToS Interpretation/Mapping Templates. Note -- that instances 1 through 32 are reserved for built-in templates. -- User configured instances should have an instance ID of 33 or higher. wfIpTosTemplateCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpTosTemplateCfgEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "The list of user configured ToS/DS byte interpretation/mapping templates" ::= { wfIpGroup 32 } wfIpTosTemplateCfgEntry OBJECT-TYPE SYNTAX WfIpTosTemplateCfgEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A ToS/DS byte interpretation/mapping" INDEX { wfIpTosTemplateCfgIndex } ::= { wfIpTosTemplateCfgTable 1 } WfIpTosTemplateCfgEntry ::= SEQUENCE { wfIpTosTemplateCfgIndex INTEGER (33..256), wfIpTosTemplateCfgCreate INTEGER, wfIpTosTemplateCfgName DisplayString, wfIpTosTemplateCfgStatus INTEGER, wfIpTosTemplateCfgRxEnable INTEGER, wfIpTosTemplateCfgRxMapping OCTET STRING, wfIpTosTemplateCfgTxEnable INTEGER, wfIpTosTemplateCfgTxMapping OCTET STRING } wfIpTosTemplateCfgCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a ToS template." DEFVAL { create } ::= { wfIpTosTemplateCfgEntry 1 } wfIpTosTemplateCfgIndex OBJECT-TYPE SYNTAX INTEGER (33..256) ACCESS read-only STATUS obsolete DESCRIPTION "The identifier of this ToS/DS byte interpretation/mapping" ::= { wfIpTosTemplateCfgEntry 2 } wfIpTosTemplateCfgName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS obsolete DESCRIPTION "User-specified name of this ToS/DS byte interpretation/ mapping template" ::= { wfIpTosTemplateCfgEntry 3 } wfIpTosTemplateCfgStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2), notconfigurable(3) } ACCESS read-only STATUS obsolete DESCRIPTION "The status of this entry in the table. valid(1) indicates the template has been configured correctly. invalid(2) indicates there is a problem with the entry. notconfigurable(3) indicates an attempt has been made to modify a reserved, built-in template." DEFVAL { invalid } ::= { wfIpTosTemplateCfgEntry 4 } wfIpTosTemplateCfgRxEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Indicates if the ToS/DS byte is interpreted for packets received on IP interfaces using this template. disabled - The ToS field is ignored. All received packets have the lowest service class. enabled - convert the ToS byte to an internal service class. The internal service class is 'carried' with the packet through the forwarding path, affecting various internal mechanisms (e.g. queueing, policing, clipping) and then possibly used at the egress interface to affect changes to the ToS value, which VC, etc." DEFVAL { disabled } ::= { wfIpTosTemplateCfgEntry 5 } wfIpTosTemplateCfgRxMapping OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "RxMapping controls the mapping of the ToS/DS byte to an internal service class (ISC). It consists of a list of (pattern, mask, ISC, DP) tuples. If the ToS byte contains the indicated pattern after being bit-wise ANDed with the mask, then the packet will be given the specified ISC. Each tuple is represented by four octets: one each for pattern, mask, and ISC, and DP in that order. e.g. for these two tuples of (pattern, mask, ISC, DP): (0x24, 0x7f, 5, 0) and (0x36, 0x7f, 2, 0) the octet string would have a length of eight and contain: 0x24, 0x7f, 0x05, 0x00, 0x36, 0x7f, 0x02, 0x00 Values greater than 7 for the ISC octet are reserved, as are values greater than 1 for the DP octet" ::= { wfIpTosTemplateCfgEntry 6 } wfIpTosTemplateCfgTxEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "TxHandling Indicates how the ToS/DS byte is handled for packets transmitted on IP interfaces using this interpretation/mapping template: disable - no changes is made to the IP header. enable - convert the internal service class to a new ToS octet, based on the mappings configured in wfIpTosTemplateCfgTxMapping." DEFVAL { disabled } ::= { wfIpTosTemplateCfgEntry 7 } wfIpTosTemplateCfgTxMapping OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "TxMapping controls the mapping of the Internal Service Class (ISC) to the ToS/DS byte. It consists of a list of (pattern, mask, ISC, DP) tuples stored in the same format as wfIpTosTemplateCfgRxMapping. For a packet with a given ISC and DP, the bits selected by 'mask' in the the packet's ToS byte will be modified to contain 'pattern'." ::= { wfIpTosTemplateCfgEntry 8 } -- ToS Interpretation/Mapping Template Table. This table provides both -- the user configured ToS templates (as configured in -- wfIpTosTemplateCfgTableReferred as well as the built-in templates. -- Each IP interface has a reference to this table in -- wfIpIntfCfgEntry.wfIpIntfCfgTosTemplate wfIpTosTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpTosTemplateEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "The list of ToS/DS byte interpretation/mapping templates" ::= { wfIpGroup 33 } wfIpTosTemplateEntry OBJECT-TYPE SYNTAX WfIpTosTemplateEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A ToS/DS byte interpretation/mapping" INDEX { wfIpTosTemplateIndex } ::= { wfIpTosTemplateTable 1 } WfIpTosTemplateEntry ::= SEQUENCE { wfIpTosTemplateIndex INTEGER (1..256), wfIpTosTemplateName DisplayString, wfIpTosTemplateStatus INTEGER, wfIpTosTemplateRxEnable INTEGER, wfIpTosTemplateRxMapping OCTET STRING, wfIpTosTemplateTxEnable INTEGER, wfIpTosTemplateTxMapping OCTET STRING } wfIpTosTemplateIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS obsolete DESCRIPTION "The identifier of this ToS/DS byte interpretation/mapping" ::= { wfIpTosTemplateEntry 1 } wfIpTosTemplateName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "User-specified name of this ToS/DS byte interpretation/ mapping template" ::= { wfIpTosTemplateEntry 2 } wfIpTosTemplateStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2), builtin(3) } ACCESS read-only STATUS obsolete DESCRIPTION "The status of this entry in the table. valid(1) indicates the template has been configured correctly. invalid(2) indicates there is a problem with the entry. builtin(3) indicates that this instance is a built-in template that can not be modified." DEFVAL { invalid } ::= { wfIpTosTemplateEntry 3 } wfIpTosTemplateRxEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS obsolete DESCRIPTION "Indicates if the ToS/DS byte is interpreted for packets received on IP interfaces using this template. disabled - The ToS field is ignored. All received packets have the lowest service class. enabled - convert the ToS byte to an internal service class. The internal service class is 'carried' with the packet through the forwarding path, affecting various internal mechanisms (e.g. queueing, policing, clipping) and then possibly used at the egress interface to affect changes to the ToS value, which VC, etc." DEFVAL { disabled } ::= { wfIpTosTemplateEntry 4 } wfIpTosTemplateRxMapping OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS obsolete DESCRIPTION "RxMapping controls the mapping of the ToS/DS byte to an internal service class (ISC). It consists of a list of (pattern, mask, ISC, DP) tuples. If the ToS byte contains the indicated pattern after being bit-wise ANDed with the mask, then the packet will be given the specified ISC. Each tuple is represented by four octets: one each for pattern, mask, and ISC, and DP in that order. e.g. for these two tuples of (pattern, mask, ISC, DP): (0x24, 0x7f, 5, 0) and (0x36, 0x7f, 2, 0) the octet string would have a length of eight and contain: 0x24, 0x7f, 0x05, 0x00, 0x36, 0x7f, 0x02, 0x00 Values greater than 7 for the ISC octet are reserved, as are values greater than 1 for the DP octet" ::= { wfIpTosTemplateEntry 5 } wfIpTosTemplateTxEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS obsolete DESCRIPTION "TxHandling Indicates how the ToS/DS byte is handled for packets transmitted on IP interfaces using this interpretation/mapping template: disable - no changes is made to the IP header. enable - convert the internal service class to a new ToS octet, based on the mappings configured in wfIpTosTemplateTxMapping." DEFVAL { disabled } ::= { wfIpTosTemplateEntry 6 } wfIpTosTemplateTxMapping OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS obsolete DESCRIPTION "TxMapping controls the mapping of the Internal Service Class (ISC) to the ToS/DS byte. It consists of a list of (pattern, mask, ISC, DP) tuples stored in the same format as wfIpTosTemplateRxMapping. For a packet with a given ISC and DP, the bits selected by 'mask' in the the packet's ToS byte will be modified to contain 'pattern'." ::= { wfIpTosTemplateEntry 7 } wfIpGreTnlTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpGreTnlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "GRE tunnel definitions" ::= { wfIpGroup 27 } wfIpGreTnlEntry OBJECT-TYPE SYNTAX WfIpGreTnlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A GRE tunnel definition" INDEX { wfIpGreTnlNum } ::= { wfIpGreTnlTable 1 } WfIpGreTnlEntry ::= SEQUENCE { wfIpGreTnlCreate INTEGER, wfIpGreTnlEnable INTEGER, wfIpGreTnlState INTEGER, wfIpGreTnlNum INTEGER, wfIpGreTnlName DisplayString, wfIpGreTnlCctNum INTEGER, wfIpGreTnlLocIpAddr IpAddress, wfIpGreTnlMinMtu INTEGER } wfIpGreTnlCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a GRE tunnel." DEFVAL { created } ::= { wfIpGreTnlEntry 1 } wfIpGreTnlEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enableded. Users perform a set operation on this object in order to enable/disablea GRE tunnel." DEFVAL { enabled } ::= { wfIpGreTnlEntry 2 } wfIpGreTnlState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the GRE tunnel" DEFVAL { down } ::= { wfIpGreTnlEntry 3 } wfIpGreTnlNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "GRE tunnel number" ::= { wfIpGreTnlEntry 4 } wfIpGreTnlName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "GRE tunnel name" ::= { wfIpGreTnlEntry 5 } wfIpGreTnlCctNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Circuit number associated with GRE tunnel" DEFVAL {-1} ::= { wfIpGreTnlEntry 6} wfIpGreTnlLocIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "GRE tunnel local IP address" ::= { wfIpGreTnlEntry 7} wfIpGreTnlMinMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minimum MTU for GRE tunnel" DEFVAL {0} ::= { wfIpGreTnlEntry 8} wfIpGreConnTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpGreConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Definitions of GRE tunnel connections. Each point to multipoint tunnel is a group (possibly with only 1 member) of point to point connections which share local configuration parameters." ::= { wfIpGroup 28 } wfIpGreConnEntry OBJECT-TYPE SYNTAX WfIpGreConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A GRE tunnel connection definition" INDEX { wfIpGreConnTnlNum, wfIpGreConnNum } ::= { wfIpGreConnTable 1 } WfIpGreConnEntry ::= SEQUENCE { wfIpGreConnCreate INTEGER, wfIpGreConnEnable INTEGER, wfIpGreConnTnlNum INTEGER, wfIpGreConnNum INTEGER, wfIpGreConnName DisplayString, wfIpGreConnRemIpAddr IpAddress, wfIpGreConnProtoMap INTEGER } wfIpGreConnCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a GRE connection." DEFVAL { created } ::= { wfIpGreConnEntry 1 } wfIpGreConnEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enableded. Users perform a set operation on this object in order to enable/disablea GRE connection." DEFVAL { enabled} ::= { wfIpGreConnEntry 2 } wfIpGreConnTnlNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "GRE tunnel number for this connection. This ties the connection to a local endpoint." ::= { wfIpGreConnEntry 3 } wfIpGreConnNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "GRE tunnel connection number." ::= { wfIpGreConnEntry 4 } wfIpGreConnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "GRE connection name" ::= { wfIpGreConnEntry 5} wfIpGreConnRemIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "GRE tunnel connection remote IP address" ::= { wfIpGreConnEntry 6} wfIpGreConnProtoMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "CONN_PROTO_IP 1 CONN_PROTO_IPX 2 CONN_PROTO_OSI 4" ::= { wfIpGreConnEntry 7 } wfIpBaseDbg OBJECT IDENTIFIER ::= { wfIpGroup 34 } wfIpBaseDbgCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP base debug." DEFVAL { created } ::= { wfIpBaseDbg 1 } wfIpBaseDbgOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reserved" ::= { wfIpBaseDbg 2 } wfIpBaseDbgAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "reserved" ::= { wfIpBaseDbg 3 } wfIpBaseDbgAddressMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "reserved" ::= { wfIpBaseDbg 4 } wfIpBaseDbgMisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reserved" ::= { wfIpBaseDbg 5 } wfIpFilterTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpFilterTemplateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines the criteria, actions and action data of an IP Traffic Filter. An entry in this table will be pointed to by the wfIpTrafficFilterDefinition attribute of a wfIpTrafficFilter table entry if a template was used to define the filter definition. This feature was added to 13.20 for BCC support." ::= { wfIpGroup 35 } wfIpFilterTemplateEntry OBJECT-TYPE SYNTAX WfIpFilterTemplateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An IP Traffic Filter definition" INDEX { wfIpFilterTemplateRuleNumber, wfIpFilterTemplateFragment } ::= { wfIpFilterTemplateTable 1 } WfIpFilterTemplateEntry ::= SEQUENCE { wfIpFilterTemplateCreate INTEGER, wfIpFilterTemplateRuleNumber INTEGER, wfIpFilterTemplateFragment INTEGER, wfIpFilterTemplateDefinition Opaque, wfIpFilterTemplateName DisplayString } wfIpFilterTemplateCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter template; created - traffic filter template exists; deleted - traffic filter template does not exist and can be deleted." DEFVAL { created } ::= { wfIpFilterTemplateEntry 1 } wfIpFilterTemplateRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the template." ::= { wfIpFilterTemplateEntry 2 } wfIpFilterTemplateFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfIpFilterTemplateEntry 3 } wfIpFilterTemplateDefinition OBJECT-TYPE SYNTAX Opaque ACCESS read-write STATUS mandatory DESCRIPTION "The criteria, actions and action data that defines the filter template." ::= { wfIpFilterTemplateEntry 4 } wfIpFilterTemplateName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of this filter template." ::= { wfIpFilterTemplateEntry 5 } END -- Wellfleet-IP-MIB