XYLAN-HREX-MIB DEFINITIONS ::= BEGIN -- xylan-hrex.mib -- Revision: 1.0 -- Date: December 1999 -- Alcatel Internetworking, Inc. -- 26801 W. Agoura Road -- Calabasas, CA 91301 -- (818) 880-3500 -- support@ind.alcatel.com -- This module provides authoritative definitions for Alcatel Internetworking, Inc. -- HRE-X. -- This module will be extended, as needed. -- Alcatel Internetworking, Inc. reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Alcatel Internetworking, -- Inc. to determine whether any such changes have been made. -- Current MIBs are availible from the following URLs: -- ftp://ftp.ind.alcatel.com/pub/products/mibs -- http://www.ind.alcatel.com -- In no event shall Alcatel Internetworking, Inc. be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Alcatel Internetworking, -- Inc. has been advised of, known, or should have known, the -- possibility of such damages. -- Alcatel Internetworking, Inc. grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in connection -- with the management of Alcatel Internetworking, Inc. products. -- Copyright (C) 1998, Alcatel Internetworking, Inc. All Rights Reserved. IMPORTS OBJECT-TYPE FROM RFC-1212 Counter FROM RFC1155-SMI xylanHrexArch FROM XYLAN-BASE-MIB ; -- -- xylanHrexRegisterTable OBJECT-TYPE SYNTAX SEQUENCE OF HrexRegisterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry for an HRE-X Router Port MAC register." ::= {xylanHrexArch 1} xylanHrexRegisterEntry OBJECT-TYPE SYNTAX HrexRegisterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to a single register." INDEX { xylanHrexRegisterNumber } ::= {xylanHrexRegisterTable 1} HrexRegisterEntry ::= SEQUENCE { xylanHrexRegisterNumber INTEGER, xylanHrexRegisterAllowType INTEGER, xylanHrexRegisterUseType INTEGER } xylanHrexRegisterNumber OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "The number of the HRE-X Router Port MAC register." ::= { xylanHrexRegisterEntry 1 } xylanHrexRegisterAllowType OBJECT-TYPE SYNTAX INTEGER { invalid (0), any (1), cip (2), m013 (3), mpoa (4), routing (5), vrrp (6) } ACCESS read-write STATUS mandatory DESCRIPTION "The service type that is permitted for the HRE-X Router Router Port MAC register." ::= {xylanHrexRegisterEntry 2} xylanHrexRegisterUseType OBJECT-TYPE SYNTAX INTEGER { invalid (0), unused (1), cip (2), m013 (3), mpoa (4), routing (5), vrrp (6) } ACCESS read-only STATUS mandatory DESCRIPTION "The service type to which the register has been allocated." ::= {xylanHrexRegisterEntry 3} xylanHrexStatistics OBJECT IDENTIFIER ::= { xylanHrexArch 2 } xylanHrexIpPacketsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of IP packets received by the HRE-Xs." ::= { xylanHrexStatistics 1 } xylanHrexIpPacketsForwarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of IP packets forwarded by the HRE-Xs." ::= { xylanHrexStatistics 2 } xylanHrexIpPacketsDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of IP packets discarded by the HRE-Xs." ::= { xylanHrexStatistics 3 } xylanHrexIpxPacketsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of IPX packets received by the HRE-Xs." ::= { xylanHrexStatistics 4 } xylanHrexIpxPacketsForwarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of IPX packets forwarded by the HRE-Xs." ::= { xylanHrexStatistics 5 } xylanHrexIpxPacketsDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of IPX packets discarded by the HRE-Xs." ::= { xylanHrexStatistics 6 } xylanHrexUtilization OBJECT IDENTIFIER ::= { xylanHrexArch 3 } xylanHrexPseudoCamHashTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HRE-X PseudoCAM hash entries that are configured for use." ::= { xylanHrexUtilization 1 } xylanHrexPseudoCamHashFree OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HRE-X PseudoCAM hash entries that are currently not in use." ::= { xylanHrexUtilization 2 } xylanHrexPseudoCamCollisionTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HRE-X PseudoCAM collision entries that are configured for use." ::= { xylanHrexUtilization 3 } xylanHrexPseudoCamCollisionFree OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HRE-X PseudoCAM collision entries that are currently not in use." ::= { xylanHrexUtilization 4 } xylanHrexCacheTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HRE-X Cache entries that are configured for use." ::= { xylanHrexUtilization 5 } xylanHrexCacheFree OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HRE-X cache entries that are currently not in use." ::= { xylanHrexUtilization 6 } xylanHrexCollisionLengthMax OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The longest collision chain currently in use in the HRE-X." ::= { xylanHrexUtilization 7 } xylanHrexCollisionLengthAvg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The average collision chain length currently in use in the HRE-X." ::= { xylanHrexUtilization 8 } xylanHrexHash OBJECT IDENTIFIER ::= { xylanHrexArch 4 } xylanHrexHashOptimize OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Causes the switch to compute an optimized hash function for the HRE-X PseudoCAM and to program this into the HRE-X(s)." ::= { xylanHrexHash 1 } xylanHrexHashDefault OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Causes the switch to restore the hash function for the HRE-X PseudoCAM to the default value and to program this into the HRE-X(s)." ::= { xylanHrexHash 2 } END