QOSTRAFFIC-MIB 

DEFINITIONS 	::= BEGIN

--  TITLE:  Communication Server 1000 Quality of Service traffic (QoSTraffic) MIB

--  Author: Deepa Naik
-- 
--  This MIB is similar to the QOS-MIB which supported on Signaling Server. The 
--  QOSTRAFFIC-MIB mib is supported on the Call Server directly.

--  This specification has been successfully compiled with the following 
--  MIB compilers:
--    a) Wind River Systems  Emissary SNMP MIB Compiler, version 7.0
--    b) Wind River Systems  WindManage MIB Compiler, version 9.3
--
--  Note: 
--  This document is maintained as a text file.

IMPORTS	
	OBJECT-TYPE, MODULE-IDENTITY, enterprises	FROM SNMPv2-SMI;

qostrafficmib	MODULE-IDENTITY 
	LAST-UPDATED "200805051300Z"
	ORGANIZATION "Nortel"
	CONTACT-INFO  "GNTS"
	DESCRIPTION "This MIB contains zone traffic report QoS parameters 
                     from the Call Server."
	::= { smp 54 }	 

nortel			OBJECT IDENTIFIER ::= { enterprises 562 }
meridian		OBJECT IDENTIFIER ::= { nortel 3 }
smp			OBJECT IDENTIFIER ::= { meridian 3 }
 
ztZoneGroup		OBJECT IDENTIFIER ::= { smp 19 }

QosParmValue				::= INTEGER ( 0..9999999 )


--  General definitions
--
--  Zone Table on Call Server
ztZoneTable   OBJECT-TYPE
              SYNTAX  SEQUENCE OF ZtZoneEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                      "The zoneTable is a table of zone entries" 
              ::= { ztZoneGroup 1 }

ztZoneEntry OBJECT-TYPE
              SYNTAX  ZtZoneEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                      "The zoneEntry contains object identifiers in a zone"
              INDEX   { ztCallsMadeIn }
              ::= { ztZoneTable 1 }

ZtZoneEntry ::=
              SEQUENCE {
        	ztCallsMadeIn 	   QosParmValue,
        	ztCallsBlockedIn 	   QosParmValue,
        	ztPeakIn 		   QosParmValue,
        	ztAvgIn 		   QosParmValue,
        	ztInThrViol 	   QosParmValue,
        	ztIntervalIn 	   QosParmValue,
        	ztUnacpLatencyIn 	   QosParmValue,
        	ztUnacpPacketLossIn  QosParmValue,
        	ztUnacpJitterIn 	   QosParmValue,
        	ztUnacpRFactorIn 	   QosParmValue,
        	ztUnacpEchoRLossIn   QosParmValue,
        	ztWarnLatencyIn 	   QosParmValue,
        	ztWarnJitterIn 	   QosParmValue,
        	ztWarnPacketLossIn   QosParmValue,
        	ztWarnRFactorIn 	   QosParmValue,
        	ztWarnEchoRLossIn    QosParmValue,
        	ztCallsMadeOut 	   QosParmValue,
        	ztCallsBlockedOut    QosParmValue,
        	ztPeakOut 	   QosParmValue,
        	ztAvgOut 		   QosParmValue,
        	ztOutThrViol 	   QosParmValue,
        	ztIntervalOut 	   QosParmValue,
        	ztUnacpLatencyOut    QosParmValue,
        	ztUnacpPacketLossOut QosParmValue,
        	ztUnacpJitterOut 	   QosParmValue,
        	ztUnacpRFactorOut    QosParmValue,
        	ztUnacpEchoRLossOut  QosParmValue,
        	ztWarnLatencyOut 	   QosParmValue,
        	ztWarnJitterOut 	   QosParmValue,
        	ztWarnPacketLossOut  QosParmValue,
        	ztWarnRFactorOut 	   QosParmValue,
        	ztWarnEchoRLossOut   QosParmValue
		}


-- Intra Zone data

ztCallsMadeIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of successful Intrazone calls made"
        ::=  { ztZoneEntry 1 }

ztCallsBlockedIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone calls blocked"
        ::=  { ztZoneEntry 2 }

ztPeakIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "Intrazone peak bandwidth (%)"
        ::=  { ztZoneEntry 3 }

ztAvgIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "Intrazone average bandwidth usage (%)"
        ::=  { ztZoneEntry 4 }

ztInThrViol   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "Intrazone bandwidth usage threshold violations"
        ::=  { ztZoneEntry 5 }

ztIntervalIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone measuring interval samples"
        ::=  { ztZoneEntry 6 }

ztUnacpLatencyIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone unacceptable latency samples"
        ::=  { ztZoneEntry 7 }

ztUnacpPacketLossIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone unacceptable packet loss"
        ::=  { ztZoneEntry 8 }

ztUnacpJitterIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone unacceptable jitter samples"
        ::=  { ztZoneEntry 9 }

ztUnacpRFactorIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone unacceptable R factor samples"
        ::=  { ztZoneEntry 10 }

ztUnacpEchoRLossIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone unacceptable Echo Return Loss"
        ::=  { ztZoneEntry 11 }

ztWarnLatencyIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone warning latency samples"
        ::=  { ztZoneEntry 12 }

ztWarnJitterIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone warning jitter samples"
        ::=  { ztZoneEntry 13 }

ztWarnPacketLossIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone warning packet loss samples"
        ::=  { ztZoneEntry 14 }

ztWarnRFactorIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone warning R factor samples"
        ::=  { ztZoneEntry 15 }

ztWarnEchoRLossIn   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Intrazone warning Echo Return Loss"
        ::=  { ztZoneEntry 16 }

-- Inter Zone Data

ztCallsMadeOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone calls made"
        ::=  { ztZoneEntry 17 }

ztCallsBlockedOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone calls blocked"
        ::=  { ztZoneEntry 18 }

ztPeakOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "Interzone peak bandwidth (%)"
        ::=  { ztZoneEntry 19 }

ztAvgOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "Interzone average bandwidth usage (%)"
        ::=  { ztZoneEntry 20 }

ztOutThrViol   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "Interzone bandwidth usage threshold violations"
        ::=  { ztZoneEntry 21 }

ztIntervalOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone measuring interval samples"
        ::=  { ztZoneEntry 22 }

ztUnacpLatencyOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone unacceptable latency samples"
        ::=  { ztZoneEntry 23 }

ztUnacpPacketLossOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone unacceptable packet loss samples"
        ::=  { ztZoneEntry 24 }

ztUnacpJitterOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone unacceptable jitter samples"
        ::=  { ztZoneEntry 25 }

ztUnacpRFactorOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone unacceptable R factor samples"
        ::=  { ztZoneEntry 26 }

ztUnacpEchoRLossOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone unacceptable Echo Return Loss"
        ::=  { ztZoneEntry 27 }

ztWarnLatencyOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone warning latency samples"
        ::=  { ztZoneEntry 28 }

ztWarnJitterOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone warning jitter samples"
        ::=  { ztZoneEntry 29 }

ztWarnPacketLossOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone warning packet loss samples"
        ::=  { ztZoneEntry 30 }

ztWarnRFactorOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone warning R factor samples"
        ::=  { ztZoneEntry 31 }

ztWarnEchoRLossOut   OBJECT-TYPE
                SYNTAX          QosParmValue
                MAX-ACCESS      read-only
                STATUS          current
                DESCRIPTION
                        "The count of Interzone warning Echo Return Loss"
        ::=  { ztZoneEntry 32 }

END