RC-DIAG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress
        FROM SNMPv2-SMI
    DisplayString, TruthValue, MacAddress, RowStatus
        FROM SNMPv2-TC
    InterfaceIndex
        FROM IF-MIB
    rcDiag, rcMirror, EnableValue, PortSet
        FROM RAPID-CITY;


rcDiagMib MODULE-IDENTITY
    LAST-UPDATED "200811200000Z"
    ORGANIZATION "Bay Networks, Rapid-City Group"
    CONTACT-INFO "
                                        Edwin Tsang
                         Postal:        Bay Networks, Inc.
                                        4401 Great America Parkway
                                        Santa Clara, CA 95052-8185

                         Tel:           408-495-6159
                         Fax:           408-495-5215
                         E-mail:        edwin_tsang@baynetworks.com
        "
    DESCRIPTION  "Enterprise MIB for the Accelar product family."

    REVISION "200811200000Z" -- 20 Nov 2008
    DESCRIPTION
        "Version 14:  Added pinShort enumeration to
                      rcDiagVctPair*Status objects.
                      Did some SMIv2 cleanup."

    REVISION "200806300000Z" -- 30 Jun 2008
    DESCRIPTION
        "Version 13:  Added rcDiagLockupDiagnosticEnable,
                      rcDiagLockupActionEnable"

    REVISION "200801010000Z" -- 01 Jan 2008
    DESCRIPTION
        "Version 12: Added PortSet to the IMPORTS definition."

    REVISION "200710180000Z" -- 18 Oct 2007
    DESCRIPTION
        "Version 11: Fixed quotes in rcDiagMirrorByPortEntry 12 and 13."

    REVISION "200709060000Z" -- 06 Sept 2007
    DESCRIPTION
        "Version 10: Changed syntax for rcDiagMirrorMirroringVlanId
                     from Integer32 to INTEGER"

    REVISION "200709040000Z" -- 04 Sept 2007
    DESCRIPTION
        "Version 9: Added mib objects to rcDiagMirrorByPortTable"

    REVISION "200602090000Z" -- 09 February 2006
    DESCRIPTION
        "Version 8: Add rcDiagMirrorByPortSpEncap,
                    rcDiagMirrorByPortGranularity"

    REVISION "200510120000Z" -- 12 Oct. 2005
    DESCRIPTION
        "Version 7: Add pairForce(7) to rcDiagVctPair*Status."

    REVISION "200502010000Z" -- 01 Feb. 2005
    DESCRIPTION
        "Version 6: Fixes to the new objects in rcDiagVctTable."

    REVISION "200501140000Z" -- 14 Jan. 2005
    DESCRIPTION
        "Version 5: Added new objects in rcDiagVctTable to
                    support use of broadcom chips for cable
                    testing."

    REVISION "200412220000Z" -- 22 Dec. 2004
    DESCRIPTION
        "Version 4: Modified rcDiagMirrorByPortMode For PR"

    REVISION "200407200000Z" -- 20 July 2004
    DESCRIPTION
        "Version 3: Added version info"

    ::= { rcDiag 0 }

-- Mirror Group

rcMirrorSaveConfig OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Control whether Mirror configuration information
        should be saved to NVRAM so mirror settings can
        be automatically reinstalled after a system
        reboot.
        
        Setting rcMirrorSaveConfig to true does not
        immediately save the configuration information.
        The save happens when the rcSysAction variable
        is set to 'saveToNVRAM(4)'."
    ::= { rcMirror 1 }

rcMirrorByPort OBJECT IDENTIFIER ::= { rcMirror 2 }

rcMirrorByPortEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "Used to indicate whether the mirror by port
        feature is active.  The system can only support
        mirroring on two ports.  When this feature is
        active, all packets received on the port(s)
        specified by rcMirrorSrcPortOne and/or
        rcMirrorSrcPortTwo are copied to rcMirrorDstPort.
        The mirroring operation is non-intrusive."
    DEFVAL       { false }
    ::= { rcMirrorByPort 1 }

rcMirrorByPortMirrorPort OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION  "The ifIndex of the port to forward mirrored frames to."
    ::= { rcMirrorByPort 2 }

rcMirrorByPortEnableMirroredPortOne OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "Used to indicate whether the port specified in
        rcMirrorByPortMirroredPortOne should be mirrored."
    DEFVAL       { false }
    ::= { rcMirrorByPort 3 }

rcMirrorByPortMirroredPortOne OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "The ifIndex of the port to be mirrored.  That
        is, traffic received on this port will be sent
        to the mirror port."
    ::= { rcMirrorByPort 4 }

rcMirrorByPortEnableMirroredPortTwo OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "Used to indicate whether the port specified in
        rcMirrorByPortMirroredPortTwo should be mirrored."
    DEFVAL       { false }
    ::= { rcMirrorByPort 5 }

rcMirrorByPortMirroredPortTwo OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "The ifIndex of the port to be mirrored.  That
        is, traffic received on this port will be sent
        to the mirror port."
    ::= { rcMirrorByPort 6 }

-- Diag Mirror by port Table

rcDiagMirrorByPortTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF RcDiagMirrorByPortEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "This table is used to configure the Mirror By
        Port feature.  This feature allows the device
        to forward a copy of each packet seen on a
        particular port to a different port."
    ::= { rcDiag 1 }

rcDiagMirrorByPortEntry OBJECT-TYPE
    SYNTAX       RcDiagMirrorByPortEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Entry containing mirror by port information."
    INDEX { rcDiagMirrorByPortId }
    ::= { rcDiagMirrorByPortTable 1 }

RcDiagMirrorByPortEntry ::=
    SEQUENCE {
        rcDiagMirrorByPortId                Integer32,
        rcDiagMirrorByPortMirroredPort      InterfaceIndex,
        rcDiagMirrorByPortMirroringPort     InterfaceIndex,
        rcDiagMirrorByPortMode              INTEGER,
        rcDiagMirrorByPortEnable            TruthValue,
        rcDiagMirrorByPortRowStatus         RowStatus,
        rcDiagMirrorByPortOctapidId         Integer32,
        rcDiagMirrorByPortPid               Integer32,
        rcDiagMirrorRemoteMirrorVlanId      Integer32,
        rcDiagMirrorByPortSpEncap           TruthValue,
        rcDiagMirrorByPortGranularity       INTEGER,
        rcDiagMirrorByPortMirroredPortList  PortSet,
        rcDiagMirrorByPortMirroringPortList PortSet,
        rcDiagMirrorMirroringVlanId         Integer32,
        rcDiagMirrorMirroringMltId          Integer32,
        rcDiagMirrorMirroringMgId           Integer32
    }

rcDiagMirrorByPortId OBJECT-TYPE
    SYNTAX       Integer32(1..383)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Entry id."
    ::= { rcDiagMirrorByPortEntry 1 }

rcDiagMirrorByPortMirroredPort OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to configure the 'mirrored' port.  The port
        where packets are copied from."
    ::= { rcDiagMirrorByPortEntry 2 }

rcDiagMirrorByPortMirroringPort OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to configure the 'mirroring' port.  The port
        where packets are copied to."
    ::= { rcDiagMirrorByPortEntry 3 }

rcDiagMirrorByPortMode OBJECT-TYPE
    SYNTAX       INTEGER {
                     tx(1),
                     rx(2),
                     both(3),
                     rxFilter(4),
                     txFilter(5),
                     bothFilter(6)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to configure the 'mode' of the mirror operation.
        'tx' means packets being transmitted on the 'mirrored'
        port will be copied.  'rx' means packets received on
        the 'mirrored' port will be copied.  'both' means
        all traffic on the 'mirrored' port will be copied.
        'rxFilter' means packets received on the 'mirrored'
        port is copied only if it macthes filter criteria.
        'txFilter' means packets being transmitted on the
        'mirrorred' port is copied only if it matches filter
        criteria.  'bothFilter' means both ingress and egress
        traffic will be copied if it matches either ingress or
        egress filter on the 'mirrored' port."
    DEFVAL       { rx }
    ::= { rcDiagMirrorByPortEntry 4 }

rcDiagMirrorByPortEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Used to enable/disable this entry."
    DEFVAL       { true }
    ::= { rcDiagMirrorByPortEntry 5 }

rcDiagMirrorByPortRowStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Row status of this entry."
    ::= { rcDiagMirrorByPortEntry 6 }

rcDiagMirrorByPortOctapidId OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       deprecated
    DESCRIPTION  "Octapid Id for a port."
    ::= { rcDiagMirrorByPortEntry 7 }

rcDiagMirrorByPortPid OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Pid for a port."
    ::= { rcDiagMirrorByPortEntry 8 }

rcDiagMirrorRemoteMirrorVlanId OBJECT-TYPE
    SYNTAX       Integer32 (0..4094)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "vlan-id to which mirrored packets needs to
        be send for remote mirroring. If set, this
        vlan id is used in mirror tag of the remote
        mirrored packet"
    ::= { rcDiagMirrorByPortEntry 9 }

rcDiagMirrorByPortSpEncap OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "disable/enable service provide encapsulation. If this
        attribute is true the mirrored packets contains the service provider
        encapsulation, OEL2 and Mac-in-Mac encapsulation are supported."
    DEFVAL       { false }
    ::= { rcDiagMirrorByPortEntry 10 }

rcDiagMirrorByPortGranularity OBJECT-TYPE
    SYNTAX       INTEGER {
                     physicalPortLevel(1),
                     serviceLevel(2)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to configure the 'granularity' of the mirror
        operation physicalPort means all traffic ingressing or egressing out of
        the mirrored port shall be copied to the mirroring port.
        services means all traffic ingressing or egressing out of the
        end-point/cust-ip-vlan shall be copied to the mirroring port."
    DEFVAL       { physicalPortLevel }
    ::= { rcDiagMirrorByPortEntry 11 }

rcDiagMirrorByPortMirroredPortList OBJECT-TYPE
    SYNTAX       PortSet
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  "Used to configure mirroring port list.Port list where packets are copied from"
    ::= { rcDiagMirrorByPortEntry 12 }

rcDiagMirrorByPortMirroringPortList OBJECT-TYPE
    SYNTAX       PortSet
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  "Used to configure mirroring port list.Port list where the packets are copied to"
    ::= { rcDiagMirrorByPortEntry 13 }

rcDiagMirrorMirroringVlanId OBJECT-TYPE
    SYNTAX       Integer32 (0..4094)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  "Destination is a VLAN."
    ::= { rcDiagMirrorByPortEntry 14 }

rcDiagMirrorMirroringMltId OBJECT-TYPE
    SYNTAX       Integer32 (0..256)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  "Destination is a MLT"
    ::= { rcDiagMirrorByPortEntry 15 }

rcDiagMirrorMirroringMgId OBJECT-TYPE
    SYNTAX       Integer32 (0..4096)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "contains information about the MGID allocated."
    ::= { rcDiagMirrorByPortEntry 16}


-- Diag Port Conv Steering Table

rcDiagPortConvSteeringTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF RcDiagPortConvSteeringEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Diag Port Conv Steering Table"
    ::= { rcDiag 2 }

rcDiagPortConvSteeringEntry OBJECT-TYPE
    SYNTAX       RcDiagPortConvSteeringEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Entry containing infomation of Diag Port Conv Steering."
    INDEX { rcDiagPortConvSteeringId }
    ::= { rcDiagPortConvSteeringTable 1 }

RcDiagPortConvSteeringEntry ::=
    SEQUENCE {
        rcDiagPortConvSteeringId          Integer32,
        rcDiagPortConvSteeringPortOne     Integer32,
        rcDiagPortConvSteeringPortTwo     Integer32,
        rcDiagPortConvSteeringMode        INTEGER,
        rcDiagPortConvSteeringForwardPort Integer32,
        rcDiagPortConvSteeringEnable      TruthValue,
        rcDiagPortConvSteeringRowStatus   RowStatus
    }

rcDiagPortConvSteeringId OBJECT-TYPE
    SYNTAX       Integer32 (0..2147483647)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Entry id."
    ::= { rcDiagPortConvSteeringEntry 1 }

rcDiagPortConvSteeringPortOne OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "IfIndex for port one"
    ::= { rcDiagPortConvSteeringEntry 2 }

rcDiagPortConvSteeringPortTwo OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "IfIndex for port two"
    ::= { rcDiagPortConvSteeringEntry 3 }

rcDiagPortConvSteeringMode OBJECT-TYPE
    SYNTAX       INTEGER {
                     oneToTwo(1),
                     twoToOne(2),
                     both(3)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to specify the traffic flow that should be
        captured between ports one and two."
    ::= { rcDiagPortConvSteeringEntry 4 }

rcDiagPortConvSteeringForwardPort OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "IfIndex of the port where captured traffic should
        be forwarded to."
    ::= { rcDiagPortConvSteeringEntry 5 }

rcDiagPortConvSteeringEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Enable this entry."
    DEFVAL       { true }
    ::= { rcDiagPortConvSteeringEntry 6 }

rcDiagPortConvSteeringRowStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Used to create/delete entries in the rcDiagMirrorByPortTable."
    ::= { rcDiagPortConvSteeringEntry 7 }


-- Diag Mac Conv Steering Table

rcDiagMacConvSteeringTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF RcDiagMacConvSteeringEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Diag Mac Conv Steering Table"
    ::= { rcDiag 3 }

rcDiagMacConvSteeringEntry OBJECT-TYPE
    SYNTAX       RcDiagMacConvSteeringEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Entry containing infomation of Diag Mac Conv Steering."
    INDEX { rcDiagMacConvSteeringId }
    ::= { rcDiagMacConvSteeringTable 1 }

RcDiagMacConvSteeringEntry ::=
    SEQUENCE {
        rcDiagMacConvSteeringId          Integer32,
        rcDiagMacConvSteeringSrcMac      MacAddress,
        rcDiagMacConvSteeringDstMac      MacAddress,
        rcDiagMacConvSteeringInPort      Integer32,
        rcDiagMacConvSteeringForwardPort Integer32,
        rcDiagMacConvSteeringEnable      TruthValue,
        rcDiagMacConvSteeringRowStatus   RowStatus
    }

rcDiagMacConvSteeringId OBJECT-TYPE
    SYNTAX       Integer32 (0..2147483647)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Entry id."
    ::= { rcDiagMacConvSteeringEntry 1 }

rcDiagMacConvSteeringSrcMac OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Source MAC address"
    ::= { rcDiagMacConvSteeringEntry 2 }

rcDiagMacConvSteeringDstMac OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Destination MAC address"
    ::= { rcDiagMacConvSteeringEntry 3 }

rcDiagMacConvSteeringInPort OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "IfIndex of ingress port."
    ::= { rcDiagMacConvSteeringEntry 4 }

rcDiagMacConvSteeringForwardPort OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "IfIndex of the port where captured traffic should
        be forwarded to."
    ::= { rcDiagMacConvSteeringEntry 5 }

rcDiagMacConvSteeringEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Enable this entry."
    DEFVAL       { true }
    ::= { rcDiagMacConvSteeringEntry 6 }

rcDiagMacConvSteeringRowStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Used to create/delete entries in the rcDiagMirrorByPortTable."
    ::= { rcDiagMacConvSteeringEntry 7 }

-- Diag Vct Table

rcDiagVctTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF RcDiagVctEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Diag Vct Table"
    ::= { rcDiag 4 }

rcDiagVctEntry OBJECT-TYPE
    SYNTAX       RcDiagVctEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Entry containing cable infomation and test result."
    INDEX { rcDiagVctIfIndex }
    ::= { rcDiagVctTable 1 }

RcDiagVctEntry ::=
    SEQUENCE {
        rcDiagVctIfIndex           InterfaceIndex,
        rcDiagVctNormalCableLength INTEGER,
        rcDiagVctPhyType           INTEGER,
        rcDiagVctCableStatus       INTEGER,
        rcDiagVctPair1Status       INTEGER,
        rcDiagVctPair1ErrLength    Integer32,
        rcDiagVctPair2Status       INTEGER,
        rcDiagVctPair2ErrLength    Integer32,
        rcDiagVctPair3Status       INTEGER,
        rcDiagVctPair3ErrLength    Integer32,
        rcDiagVctPair4Status       INTEGER,
        rcDiagVctPair4ErrLength    Integer32,
        rcDiagVctStartTest         TruthValue,
        rcDiagVctTestDone          TruthValue,
        rcDiagVctCableCategory     INTEGER,
        rcDiagVctCableLength       Integer32,
        rcDiagVctPair1Polarity     INTEGER,
        rcDiagVctPair1Swap         INTEGER,
        rcDiagVctPair1Skew         Integer32,
        rcDiagVctPair2Polarity     INTEGER,
        rcDiagVctPair2Swap         INTEGER,
        rcDiagVctPair2Skew         Integer32,
        rcDiagVctPair3Polarity     INTEGER,
        rcDiagVctPair3Swap         INTEGER,
        rcDiagVctPair3Skew         Integer32,
        rcDiagVctPair4Polarity     INTEGER,
        rcDiagVctPair4Swap         INTEGER,
        rcDiagVctPair4Skew         Integer32
    }

rcDiagVctIfIndex OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Port IfIndex."
    ::= { rcDiagVctEntry 1 }

rcDiagVctNormalCableLength OBJECT-TYPE
    SYNTAX       INTEGER {
                     cableLT50M(1),
                     cable50M80M(2),
                     cable80M110M(3),
                     cable110M140M(4),
                     cableGT140M(5),
                     cableUnknown(6)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cable length, this indicates a range in which the
        actual length falls."
    ::= { rcDiagVctEntry 2 }

rcDiagVctPhyType OBJECT-TYPE
    SYNTAX       INTEGER {
                     phy100M(1),
                     phy1000M(2),
                     phy10000M(3),
                     phy100000M(4),
                     phyUnknown(5),
                     bcm5464(6),
                     bcm5464s(7)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Phy type, 100MHz throught 1 GHz, or broadcom phy."
    ::= { rcDiagVctEntry 3 }

rcDiagVctCableStatus OBJECT-TYPE
    SYNTAX       INTEGER {
                     cableFail(1),
                     cableNormal(2),
                     cableOpen(3),
                     cableShorted(4),
                     cableNotApplicable(5),
                     cableUntested(6)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Status of the cable as a whole.  The status of a
        cable is in a sense, a summation of the status of its
        pairs.  If all the pairs are normal, then the cable is
        normal.  If the cable consists of zero or more normal
        pairs and one or more open pairs, then the cable is
        considered open.  If it consists of shorted pairs and
        normal pairs, then the cable is considered shorted.
        Any combination of open and shorted pairs is
        considered simply FAILED."
    ::= { rcDiagVctEntry 4 }

rcDiagVctPair1Status OBJECT-TYPE
    SYNTAX       INTEGER {
                     pairFail(1),
                     pairNormal(2),
                     pairOpen(3),
                     pairShorted(4),
                     pairNotApplicable(5),
                     pairNotTested(6),
                     pairForce(7),
                     pinShort(8)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The status of a single pair in the cable"
    ::= { rcDiagVctEntry 5 }

rcDiagVctPair1ErrLength OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Error Pair Length, in meters, measured by Time
        Domain Reflectometry."
    ::= { rcDiagVctEntry 6 }

rcDiagVctPair2Status OBJECT-TYPE
    SYNTAX       INTEGER {
                     pairFail(1),
                     pairNormal(2),
                     pairOpen(3),
                     pairShorted(4),
                     pairNotApplicable(5),
                     pairNotTested(6),
                     pairForce(7),
                     pinShort(8)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The status of a single pair in the cable"
    ::= { rcDiagVctEntry 7 }

rcDiagVctPair2ErrLength OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Error Pair Length, in meters, measured by Time
        Domain Reflectometry."
    ::= { rcDiagVctEntry 8 }

rcDiagVctPair3Status OBJECT-TYPE
    SYNTAX       INTEGER {
                     pairFail(1),
                     pairNormal(2),
                     pairOpen(3),
                     pairShorted(4),
                     pairNotApplicable(5),
                     pairNotTested(6),
                     pairForce(7),
                     pinShort(8)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The status of a single pair in the cable"
    ::= { rcDiagVctEntry 9 }

rcDiagVctPair3ErrLength OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Error Pair Length, in meters, measured by Time
        Domain Reflectometry."
    ::= { rcDiagVctEntry 10 }

rcDiagVctPair4Status OBJECT-TYPE
    SYNTAX       INTEGER {
                     pairFail(1),
                     pairNormal(2),
                     pairOpen(3),
                     pairShorted(4),
                     pairNotApplicable(5),
                     pairNotTested(6),
                     pairForce(7),
                     pinShort(8)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The status of a single pair in the cable"
    ::= { rcDiagVctEntry 11 }

rcDiagVctPair4ErrLength OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Error Pair Length, in meters, measured by Time
        Domain Reflectometry."
    ::= { rcDiagVctEntry 12 }

rcDiagVctStartTest OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Start VCT test, Set this object to TRUE to perform
        a VCT test on the current port. A get on this
        object produces an undefines value."
    ::= { rcDiagVctEntry 13 }

rcDiagVctTestDone OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "When a VCT test is started setting rcDiagVctStartTest,
        this object is immediately set to FALSE by the switch
        software. It remain FALSE until the test is completed,
        when it is set to TRUE. When this object is TRUE,
        then the management station can immediately perform
        a GET on the test result for this port."
    ::= { rcDiagVctEntry 14 }

rcDiagVctCableCategory OBJECT-TYPE
    SYNTAX       INTEGER {
                     cat3(1),
                     cat5(2)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Cable type: CAT3 or CAT5."
    ::= { rcDiagVctEntry 15 }

rcDiagVctCableLength OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
        UNITS         "Meters"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Length of cable in meters based on average electrical
        length of 4 pairs. Measurement can be done when
        traffic is live or not."
    ::= { rcDiagVctEntry 16 }

rcDiagVctPair1Polarity OBJECT-TYPE
    SYNTAX       INTEGER {
                     inversed(1),
                     normal(2),
                     invalid(3)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The polarity of a single pair in the cable."
    ::= { rcDiagVctEntry 17 }

rcDiagVctPair1Swap OBJECT-TYPE
    SYNTAX       INTEGER {
                     normal(1),
                     swapped(2),
                     invalid(3),
                     error(4)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The pair swap in the cable."
    ::= { rcDiagVctEntry 18 }

rcDiagVctPair1Skew OBJECT-TYPE
    SYNTAX       Integer32 (-1..15)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Differential cable pair length in meters.
        Skew measurement can only be performed when cable
        gigabit link is up regardless of traffic activity.
           A value of -1 means an error occured when trying
           to get the length."
    ::= { rcDiagVctEntry 19 }

rcDiagVctPair2Polarity OBJECT-TYPE
    SYNTAX       INTEGER {
                     inversed(1),
                     normal(2),
                     invalid(3)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The polarity of a single pair in the cable."
    ::= { rcDiagVctEntry 20 }

rcDiagVctPair2Swap OBJECT-TYPE
    SYNTAX       INTEGER {
                     normal(1),
                     swapped(2),
                     invalid(3),
                     error(4)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The pair swap in the cable."
    ::= { rcDiagVctEntry 21 }

rcDiagVctPair2Skew OBJECT-TYPE
    SYNTAX       Integer32 (-1..15)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Differential cable pair length in meters.
        Skew measurement can only be performed when cable
        gigabit link is up regardless of traffic activity.
           A value of -1 means an error occured when trying
           to get the length."
    ::= { rcDiagVctEntry 22 }

rcDiagVctPair3Polarity OBJECT-TYPE
    SYNTAX       INTEGER {
                     inversed(1),
                     normal(2),
                     invalid(3)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The polarity of a single pair in the cable."
    ::= { rcDiagVctEntry 23 }

rcDiagVctPair3Swap OBJECT-TYPE
    SYNTAX       INTEGER {
                     normal(1),
                     swapped(2),
                     invalid(3),
                     error(4)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The pair swap in the cable."
    ::= { rcDiagVctEntry 24 }

rcDiagVctPair3Skew OBJECT-TYPE
    SYNTAX       Integer32 (-1..15)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Differential cable pair length in meters.
        Skew measurement can only be performed when cable
        gigabit link is up regardless of traffic activity.
           A value of -1 means an error occured when trying
           to get the length."
    ::= { rcDiagVctEntry 25 }

rcDiagVctPair4Polarity OBJECT-TYPE
    SYNTAX       INTEGER {
                     inversed(1),
                     normal(2),
                     invalid(3)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The polarity of a single pair in the cable."
    ::= { rcDiagVctEntry 26 }

rcDiagVctPair4Swap OBJECT-TYPE
    SYNTAX       INTEGER {
                     normal(1),
                     swapped(2),
                     invalid(3),
                     error(4)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The pair swap in the cable."
    ::= { rcDiagVctEntry 27 }

rcDiagVctPair4Skew OBJECT-TYPE
    SYNTAX       Integer32 (-1..15)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Differential cable pair length in meters.
        Skew measurement can only be performed when cable
        gigabit link is up regardless of traffic activity.
           A value of -1 means an error occured when trying
           to get the length."
    ::= { rcDiagVctEntry 28 }



rcDiagSaveConfig OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "Used to configure whether the various mirror feature
        settings should be saved and restored across system
        reboot."
    ::= { rcDiag 10 }

rcDiagMirrorByPortTblSize OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Used to indicate table size."
    ::= { rcDiag 11 }

rcDiagPortConvSteeringTblSize OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Used to indicate table size."
    ::= { rcDiag 12 }

rcDiagMacConvSteeringTblSize OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Used to indicate table size."
    ::= { rcDiag 13 }

rcDiagDiagnosticsEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       deprecated
    DESCRIPTION
        "Used to enable/disable the mirroring feature
        for the entire device.  This setting overrides
        any setting in the various mirroring tables."
    DEFVAL       { false }
    ::= { rcDiag 14 }


-- rcDiagPcap Group

rcDiagPcap OBJECT IDENTIFIER ::= { rcDiag 15 }

rcDiagPcapEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To enable pcap in secondary CPU"
    DEFVAL       { false }
    ::= { rcDiagPcap 1 }

rcDiagPcapBufferWrap OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "To enable buffer wrap-around when buffer is full.
        If set, pcap will continue to capture pkts, otherwise
        stops pkt storing"
    DEFVAL       { false }
    ::= { rcDiagPcap 2 }

rcDiagPcapPcmciaWrap OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To wrap around the PCMCIA when saving data in PCMCIA"
    DEFVAL       { false }
    ::= { rcDiagPcap 3 }

rcDiagPcapFrameSize OBJECT-TYPE
    SYNTAX       Integer32 (64..9600)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Number of bytes of pkts needs to be stored"
    DEFVAL       { 64 }
    ::= { rcDiagPcap 4 }

rcDiagPcapBufferSize OBJECT-TYPE
    SYNTAX       Integer32 (2..256)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "memory to be allocated for capturing the pkt"
    DEFVAL       { 2 }
    ::= { rcDiagPcap 5 }

rcDiagPcapAutoSave OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To save data automatically when buffer is full"
    DEFVAL       { false }
    ::= { rcDiagPcap 6 }

rcDiagPcapAutoSaveFileName OBJECT-TYPE
    SYNTAX       DisplayString (SIZE (0..40))
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Name of the file in which the pkt is to be stored"
    ::= { rcDiagPcap 7 }

rcDiagPcapAutoSaveDevice OBJECT-TYPE
    SYNTAX       INTEGER {
                     pcmcia(0),
                     network(1)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Where to store the captured pkts. If the option is
        network, the user need to enter an IP address also"
    ::= { rcDiagPcap 8 }

rcDiagPcapAutoSaveNetworkIpAddress OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "ip address of the remote host where the data
        needs to be stored. This field is valid only
        if the device is network"
    ::= { rcDiagPcap 9 }


rcDiagPcapFilterTableSize OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Used to indicate the number of entries in the
        Filter table"
    ::= { rcDiagPcap 10 }


-- rcDiagPcapFilterTable

rcDiagPcapFilterTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF RcDiagPcapFilterEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "A table used to store pcap secondary filters"
    ::= { rcDiagPcap 11 }

rcDiagPcapFilterEntry OBJECT-TYPE
    SYNTAX       RcDiagPcapFilterEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Pcap secondary filter desc"
    INDEX { rcDiagPcapFilterId }
    ::= { rcDiagPcapFilterTable 1 }

RcDiagPcapFilterEntry ::=
    SEQUENCE {
        rcDiagPcapFilterId                    Integer32,
        rcDiagPcapFilterEnable                EnableValue,
        rcDiagPcapFilterAction                INTEGER,
        rcDiagPcapFilterSrcMac                MacAddress,
        rcDiagPcapFilterSrcMask               Integer32,
        rcDiagPcapFilterIsInverseSrcMac       TruthValue,
        rcDiagPcapFilterDstMac                MacAddress,
        rcDiagPcapFilterDstMask               Integer32,
        rcDiagPcapFilterIsInverseDstMac       TruthValue,
        rcDiagPcapFilterVlanId                Integer32,
        rcDiagPcapFilterToVlanId              Integer32,
        rcDiagPcapFilterIsInverseVlanId       TruthValue,
        rcDiagPcapFilterPbit                  Integer32,
        rcDiagPcapFilterToPbit                Integer32,
        rcDiagPcapFilterIsInversePbit         TruthValue,
        rcDiagPcapFilterEtherType             Integer32,
        rcDiagPcapFilterToEtherType           Integer32,
        rcDiagPcapFilterIsInverseEtherType    TruthValue,
        rcDiagPcapFilterProtocolType          Integer32,
        rcDiagPcapFilterToProtocolType        Integer32,
        rcDiagPcapFilterIsInverseProtocolType TruthValue,
        rcDiagPcapFilterSrcIp                 IpAddress,
        rcDiagPcapFilterToSrcIp               IpAddress,
        rcDiagPcapFilterIsInverseSrcIp        TruthValue,
        rcDiagPcapFilterDstIp                 IpAddress,
        rcDiagPcapFilterToDstIp               IpAddress,
        rcDiagPcapFilterIsInverseDstIp        TruthValue,
        rcDiagPcapFilterDscp                  Integer32,
        rcDiagPcapFilterToDscp                Integer32,
        rcDiagPcapFilterIsInverseDscp         TruthValue,
        rcDiagPcapFilterRowStatus             RowStatus,
        rcDiagPcapFilterDscpMatchZero         TruthValue,
        rcDiagPcapFilterPbitMatchZero         TruthValue
    }

rcDiagPcapFilterId OBJECT-TYPE
    SYNTAX       Integer32 (1..1000)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Unique ID that represents the filter"
    ::= { rcDiagPcapFilterEntry 1 }

rcDiagPcapFilterEnable OBJECT-TYPE
    SYNTAX       EnableValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Filter is enabled or not"
    DEFVAL       { disable }
    ::= { rcDiagPcapFilterEntry 2 }

rcDiagPcapFilterAction OBJECT-TYPE
    SYNTAX       INTEGER {
                     drop(0),
                     capture(1),
                     trigger-on(2),
                     trigger-off(3)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Action to be takesn when policy is matched"
    DEFVAL       { capture }
    ::= { rcDiagPcapFilterEntry 3 }

rcDiagPcapFilterSrcMac OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Soruce mac address to match"
    ::= { rcDiagPcapFilterEntry 4 }

rcDiagPcapFilterSrcMask OBJECT-TYPE
    SYNTAX       Integer32 (1..6)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Soruce mac address mask. Used to specify a range"
    DEFVAL       { 6 }
    ::= { rcDiagPcapFilterEntry 5 }

rcDiagPcapFilterIsInverseSrcMac OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Soruce mac address Inverse. when set the mac
        addresses otherthan specified is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 6 }

rcDiagPcapFilterDstMac OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Destination mac address"
    ::= { rcDiagPcapFilterEntry 7 }

rcDiagPcapFilterDstMask OBJECT-TYPE
    SYNTAX       Integer32 (1..6)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Destination mac address mask. Used to specify a range"
    DEFVAL       { 6 }
    ::= { rcDiagPcapFilterEntry 8 }

rcDiagPcapFilterIsInverseDstMac OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Destination mac address Inverse. when set the mac
        addresses otherthan specified is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 9 }

rcDiagPcapFilterVlanId OBJECT-TYPE
    SYNTAX       Integer32 (0..4092)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Vlan-id of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 10 }

rcDiagPcapFilterToVlanId OBJECT-TYPE
    SYNTAX       Integer32 (0..4092)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To Vlan-id. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 11 }

rcDiagPcapFilterIsInverseVlanId OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Vlan-Id Inverse. when set the Vlan-Id
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 12 }
rcDiagPcapFilterPbit OBJECT-TYPE
    SYNTAX       Integer32 (0..7)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "pBit of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 13 }

rcDiagPcapFilterToPbit OBJECT-TYPE
    SYNTAX       Integer32 (0..7)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To pBit. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 14 }

rcDiagPcapFilterIsInversePbit OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "pBit Inverse. when set the pBit
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 15 }

rcDiagPcapFilterEtherType OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "EtherType of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 16 }

rcDiagPcapFilterToEtherType OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To EtherType. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 17 }

rcDiagPcapFilterIsInverseEtherType OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "EtherType Inverse. when set the EtherType
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 18 }

rcDiagPcapFilterProtocolType OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "ProtocolType of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 19 }

rcDiagPcapFilterToProtocolType OBJECT-TYPE
    SYNTAX       Integer32 (0..255)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To ProtocolType. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 20 }

rcDiagPcapFilterIsInverseProtocolType OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "ProtocolType Inverse. when set the ProtocolType
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 21 }

rcDiagPcapFilterSrcIp OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Source IP address of the packet to be matched"
    ::= { rcDiagPcapFilterEntry 22 }

rcDiagPcapFilterToSrcIp OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To Source IP address. Used to specify a range"
    ::= { rcDiagPcapFilterEntry 23 }

rcDiagPcapFilterIsInverseSrcIp OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Source IP address Inverse. when set the source IP
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 24 }

rcDiagPcapFilterDstIp OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Destination IP address of the packet to be matched"
    ::= { rcDiagPcapFilterEntry 25 }

rcDiagPcapFilterToDstIp OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To Destination IP address. Used to specify a range"
    ::= { rcDiagPcapFilterEntry 26 }

rcDiagPcapFilterIsInverseDstIp OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Destination IP address Inverse. when set the
        Destination IP other than specified is range
        matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 27 }

rcDiagPcapFilterDscp OBJECT-TYPE
    SYNTAX       Integer32 (0..63)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "DSCP value of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 28 }

rcDiagPcapFilterToDscp OBJECT-TYPE
    SYNTAX       Integer32 (0..63)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To DSCP. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapFilterEntry 29 }

rcDiagPcapFilterIsInverseDscp OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "DSCP Inverse. when set the DSCP
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 30 }

rcDiagPcapFilterRowStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Row Status"
    ::= { rcDiagPcapFilterEntry 31 }

rcDiagPcapFilterDscpMatchZero OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "When this value is set to true, then 0 value of
        Pbit is not taken as disable value. The user will
        be allowed to capture packets with Pbit value of
        0 also. Be default it would be set to FALSE"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 32 }

rcDiagPcapFilterPbitMatchZero OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "When this value is set to true, then 0 value of
        Pbit is not taken as disable value. The user will
        be allowed to capture packets with Pbit value of
        0 also. Be default it would be set to FALSE"
    DEFVAL       { false }
    ::= { rcDiagPcapFilterEntry 33 }


-- rcDiagPcapAdvancedFilterTable


rcDiagPcapAdvancedFilterTableSize OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Used to indicate the number of entries in the
        Filter table advanced parameter"
    ::= { rcDiagPcap 12 }

rcDiagPcapAdvancedFilterTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF RcDiagPcapAdvancedFilterEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "A table used to store pcap secondary filters"
    ::= { rcDiagPcap 13 }

rcDiagPcapAdvancedFilterEntry OBJECT-TYPE
    SYNTAX       RcDiagPcapAdvancedFilterEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Pcap secondary Advanced filter desc"
    INDEX { rcDiagPcapAdvancedFilterId }
    ::= { rcDiagPcapAdvancedFilterTable 1 }

RcDiagPcapAdvancedFilterEntry ::=
    SEQUENCE {
        rcDiagPcapAdvancedFilterId                   Integer32,
        rcDiagPcapAdvancedFilterUdpPort              Integer32,
        rcDiagPcapAdvancedFilterToUdpPort            Integer32,
        rcDiagPcapAdvancedFilterIsInverseUdpPort     TruthValue,
        rcDiagPcapAdvancedFilterTcpPort              Integer32,
        rcDiagPcapAdvancedFilterToTcpPort            Integer32,
        rcDiagPcapAdvancedFilterIsInverseTcpPort     TruthValue,
        rcDiagPcapAdvancedFilterUserDefinedData      DisplayString,
        rcDiagPcapAdvancedFilterUserDefinedDataSize  Integer32,
        rcDiagPcapAdvancedFilterUserDefinedOffset    Integer32,
        rcDiagPcapAdvancedFilterIsInverseUserDefined TruthValue,
        rcDiagPcapAdvancedFilterTimer                Integer32,
        rcDiagPcapAdvancedFilterPacketCount          Integer32,
        rcDiagPcapAdvancedFilterRefreshTimer         Integer32,
        rcDiagPcapAdvancedFilterRowStatus            RowStatus
    }


rcDiagPcapAdvancedFilterId OBJECT-TYPE
    SYNTAX       Integer32 (1..1000)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Unique ID that represents the filter"
    ::= { rcDiagPcapAdvancedFilterEntry 1 }

rcDiagPcapAdvancedFilterUdpPort OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "UdpPort of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 2 }

rcDiagPcapAdvancedFilterToUdpPort OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To UdpPort. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 3 }

rcDiagPcapAdvancedFilterIsInverseUdpPort OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "UdpPort Inverse. when set the UdpPort
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapAdvancedFilterEntry 4 }

rcDiagPcapAdvancedFilterTcpPort OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "TcpPort of the packet to be matched"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 5 }

rcDiagPcapAdvancedFilterToTcpPort OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To TcpPort. Used to specify a range"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 6 }

rcDiagPcapAdvancedFilterIsInverseTcpPort OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "TcpPort Inverse. when set the TcpPort
        otherthan specified range is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapAdvancedFilterEntry 7 }

rcDiagPcapAdvancedFilterUserDefinedData OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "User defined data to match with the packets received"
    DEFVAL       { "\0"  }
    ::= { rcDiagPcapAdvancedFilterEntry 8 }

rcDiagPcapAdvancedFilterUserDefinedDataSize OBJECT-TYPE
    SYNTAX       Integer32 (0..50)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Length of user defined data"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 9 }

rcDiagPcapAdvancedFilterUserDefinedOffset OBJECT-TYPE
    SYNTAX       Integer32 (0..9600)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Offset from which match has to start"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 10 }


rcDiagPcapAdvancedFilterIsInverseUserDefined OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "TcpPort Inverse. when set the Userdata
        otherthan specified is matched"
    DEFVAL       { false }
    ::= { rcDiagPcapAdvancedFilterEntry 11 }

rcDiagPcapAdvancedFilterTimer OBJECT-TYPE
    SYNTAX       Integer32 (0..3600000)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Timer to start the pcap capture window in ms"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 12 }

rcDiagPcapAdvancedFilterPacketCount OBJECT-TYPE
    SYNTAX       Integer32 (0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Number of packets to be captured before disabling pcap"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 13 }

rcDiagPcapAdvancedFilterRefreshTimer OBJECT-TYPE
    SYNTAX       Integer32 (0..3600000)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "Refresh timer in ms"
    DEFVAL       { 0 }
    ::= { rcDiagPcapAdvancedFilterEntry 14 }

rcDiagPcapAdvancedFilterRowStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "RowStatus"
    ::= { rcDiagPcapAdvancedFilterEntry 15 }

rcDiagPcapCopyFileName OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to indicate the file name. When set, the PCAP
        data from PCAP engine RAM is stored into this file
        in PCAP engine"
    ::= { rcDiagPcap 14 }

rcDiagPcapResetStat OBJECT-TYPE
    SYNTAX       INTEGER {
                     none(1),
                     resetStat(2)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "To Reset PCAP statistics"
    ::= { rcDiagPcap 15 }

rcDiagPcapStatPacketCapacityCount OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Packet Capacity Count"
    ::= { rcDiagPcap 16 }

rcDiagPcapStatNumberOfPacketsReceived OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Number of packets received in PCAP engine"
    ::= { rcDiagPcap 17 }

rcDiagPcapStatNumberOfPacketsAccumulated OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Number of packets captured in PCAP engine"
    ::= { rcDiagPcap 18 }

rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Number of packets dropped in PCAP engine by filters"
    ::= { rcDiagPcap 19 }

rcDiagPcapStatNumberOfPacketsDroppedInHardware OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Number of packets dropped in Hardware"
    ::= { rcDiagPcap 20 }

rcDiagPcapDataValid OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A true/false value that indicate the return
        data whether is valid."
    ::= { rcDiagPcap 21 }

rcDiagPcapEtherTypeForSvlanLevel OBJECT-TYPE
    SYNTAX       Integer32 ('05dd'h..'ffff'h)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  "EtherType of svlan level."
    ::= { rcDiagPcap 22 }

rcDiagLockupDiagnosticEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used as a flag to enable/disable the lockup diagnostic feature
        for the R-Modules"
    DEFVAL       { true }
    ::= { rcDiag 16 }

rcDiagLockupActionEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used as a flag to determine if action is to be taken
        when lockup is detected for r-modules"
    DEFVAL       { false }
    ::= { rcDiag 17 }

END