RC-PIM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, experimental,
    Integer32, IpAddress, TimeTicks  FROM SNMPv2-SMI
    RowStatus                        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
    InterfaceIndexOrZero             FROM IF-MIB
    rcPim			     FROM RAPID-CITY;

rcPimMib MODULE-IDENTITY
    LAST-UPDATED "200805180000Z"
    ORGANIZATION "Nortel Networks, Rapid-City Group"
    CONTACT-INFO "Yu-Ten Lee
                  Nortel Networks
	          4655 Great America Pkwy.
	          Santa Clara, CA 95052-8185 
		  Tel:           408-495-2560
                  Fax:           408-495-6680
                  E-mail:        ylee@nortelnetworks.com"

    DESCRIPTION		"Enterprise MIB for the Accelar product family."

    REVISION "200805180000Z" -- 18 May 2008
    DESCRIPTION "Version 5: Fixed new smilint errors."
    
    REVISION "200805130000Z" -- 13 May 2008
    DESCRIPTION "Version 4: Changed syntax of rcPimInterfaceIfIndex, rcPimRPSetComponent, rcPimComponentIndex."

    REVISION "200705220000Z" -- 22 May 2007
    DESCRIPTION "Version 3: Fix access level definition. Change access level of rcPimInterfaceMode, 
                 rcPimInterfaceHelloInterval, rcPimInterfaceJoinPruneInterval, rcPimInterfaceCBSRPreference, 
                 rcPimInterfaceCBSREnable, and rcPimComponentCRPHoldTime from 'read-write' to 'read-create'"

    REVISION "200612130000Z" -- 13 December 2006
    DESCRIPTION "Version 2: Updated the syntax of index objects to not-accessible"

    REVISION "200608310000Z" -- 31 Aug 2006
    DESCRIPTION "Version 1: Initial revision"

   ::= { rcPim 0 }

rcPimMIBObjects OBJECT IDENTIFIER ::= { rcPim 1 }

rcPimScalars OBJECT IDENTIFIER ::= { rcPimMIBObjects 1 }

rcPimJoinPruneInterval OBJECT-TYPE
    SYNTAX     Integer32 (1..18724)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The default interval at which periodic PIM-SM Join/Prune
            messages are to be sent."
    ::= { rcPimScalars 1 }

-- The PIM Interface Table

rcPimInterfaceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RcPimInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table listing the router's PIM interfaces.
            IGMP and PIM are enabled on all interfaces listed in this
            table."
    ::= { rcPimMIBObjects 2 }

rcPimInterfaceEntry OBJECT-TYPE
    SYNTAX     RcPimInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rcPimInterfaceTable."
    INDEX      { rcPimInterfaceIfIndex }
    ::= { rcPimInterfaceTable 1 }

RcPimInterfaceEntry ::= SEQUENCE {
    rcPimInterfaceIfIndex            InterfaceIndexOrZero,
    rcPimInterfaceAddress            IpAddress,
    rcPimInterfaceNetMask            IpAddress,
    rcPimInterfaceMode               INTEGER,
    rcPimInterfaceDR                 IpAddress,
    rcPimInterfaceHelloInterval      Integer32,
    rcPimInterfaceStatus             RowStatus,
    rcPimInterfaceJoinPruneInterval  Integer32,
    rcPimInterfaceCBSRPreference     Integer32,
    rcPimInterfaceCBSREnable         INTEGER
}

rcPimInterfaceIfIndex OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The ifIndex value of this PIM interface."
    ::= { rcPimInterfaceEntry 1 }

rcPimInterfaceAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The IP address of the PIM interface."
    ::= { rcPimInterfaceEntry 2 }

rcPimInterfaceNetMask OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The network mask for the IP address of the PIM interface."
    ::= { rcPimInterfaceEntry 3 }

rcPimInterfaceMode OBJECT-TYPE
    SYNTAX     INTEGER { dense(1), sparse(2), sparseDense(3) }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The configured mode of this PIM interface.  A value of
            sparseDense is only valid for PIMv1."
    DEFVAL     { dense }
    ::= { rcPimInterfaceEntry 4 }

rcPimInterfaceDR OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The Designated Router on this PIM interface.  For point-
            to-point interfaces, this object has the value 0.0.0.0."
    ::= { rcPimInterfaceEntry 5 }

rcPimInterfaceHelloInterval OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "seconds"
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The frequency at which PIM Hello messages are transmitted
            on this interface."
    DEFVAL     { 30 }
    ::= { rcPimInterfaceEntry 6 }

rcPimInterfaceStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The status of this entry.  Creating the entry enables PIM
            on the interface; destroying the entry disables PIM on the
            interface."
    ::= { rcPimInterfaceEntry 7 }

rcPimInterfaceJoinPruneInterval OBJECT-TYPE
    SYNTAX     Integer32 (1..18724)
    UNITS      "seconds"
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The frequency at which PIM Join/Prune messages are
            transmitted on this PIM interface.  The default value of
            this object is the rcPimJoinPruneInterval."
    ::= { rcPimInterfaceEntry 8 }

rcPimInterfaceCBSRPreference OBJECT-TYPE
    SYNTAX     Integer32 (-1..255)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The preference value for the local interface as a candidate
            bootstrap router.  The value of -1 is used to indicate that
            the local interface is not a candidate BSR interface."
    DEFVAL     { -1 }
    ::= { rcPimInterfaceEntry 9 }

rcPimInterfaceCBSREnable OBJECT-TYPE
    SYNTAX     INTEGER {
                  enabled(1),
                  disabled(2)
               } 
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "Enable/disable Candidate BSR on rcPim local interface."
    DEFVAL     { disabled }
    ::= { rcPimInterfaceEntry 10 }


-- The PIM Neighbor Table

rcPimNeighborTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RcPimNeighborEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table listing the router's PIM neighbors."
    ::= { rcPimMIBObjects 3 }

rcPimNeighborEntry OBJECT-TYPE
    SYNTAX     RcPimNeighborEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rcPimNeighborTable."
    INDEX      { rcPimNeighborAddress }
    ::= { rcPimNeighborTable 1 }

RcPimNeighborEntry ::= SEQUENCE {
    rcPimNeighborAddress      IpAddress,
    rcPimNeighborIfIndex      Integer32,
    rcPimNeighborUpTime       TimeTicks,
    rcPimNeighborExpiryTime   TimeTicks
}

rcPimNeighborAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The IP address of the PIM neighbor for which this entry
            contains information."
    ::= { rcPimNeighborEntry 1 }

rcPimNeighborIfIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The value of ifIndex for the interface used to reach this
            PIM neighbor."
    ::= { rcPimNeighborEntry 2 }

rcPimNeighborUpTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The time since this PIM neighbor (last) became a neighbor
            of the local router."
    ::= { rcPimNeighborEntry 3 }

rcPimNeighborExpiryTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The minimum time remaining before this PIM neighbor will be
            aged out."
    ::= { rcPimNeighborEntry 4 }


-- The PIM RP-Set Table

rcPimRPSetTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RcPimRPSetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table listing PIM information for
            candidate Rendezvous Points (RPs) for IP multicast groups.
            When the local router is the BSR, this information is
            obtained from received Candidate-RP-Advertisements.  When
            the local router is not the BSR, this information is
            obtained from received RP-Set messages."
    ::= { rcPimMIBObjects 6 }

rcPimRPSetEntry OBJECT-TYPE
    SYNTAX     RcPimRPSetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rcPimRPSetTable."
    INDEX      { rcPimRPSetComponent, rcPimRPSetGroupAddress,
                 rcPimRPSetGroupMask, rcPimRPSetAddress }
    ::= { rcPimRPSetTable 1 }

RcPimRPSetEntry ::= SEQUENCE {
    rcPimRPSetGroupAddress    IpAddress,
    rcPimRPSetGroupMask       IpAddress,
    rcPimRPSetAddress         IpAddress,
    rcPimRPSetHoldTime        Integer32,
    rcPimRPSetExpiryTime      TimeTicks,
    rcPimRPSetComponent       InterfaceIndexOrZero
}

rcPimRPSetGroupAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The IP multicast group address which, when combined with
            rcPimRPSetGroupMask, gives the group prefix for which this
            entry contains information about the Candidate-RP."
    ::= { rcPimRPSetEntry 1 }

rcPimRPSetGroupMask OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The multicast group address mask which, when combined with
            rcPimRPSetGroupAddress, gives the group prefix for which this
            entry contains information about the Candidate-RP."
    ::= { rcPimRPSetEntry 2 }

rcPimRPSetAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The IP address of the Candidate-RP."
    ::= { rcPimRPSetEntry 3 }

rcPimRPSetHoldTime OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The holdtime of a Candidate-RP.  If the local router is not
            the BSR, this value is 0."
    ::= { rcPimRPSetEntry 4 }

rcPimRPSetExpiryTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The minimum time remaining before the Candidate-RP will be
            declared down.  If the local router is not the BSR, this
            value is 0."
    ::= { rcPimRPSetEntry 5 }

rcPimRPSetComponent OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A number uniquely identifying the component.  Each protocol
            instance connected to a separate domain should have a
            different index value."
    ::= { rcPimRPSetEntry 6 }


-- The PIM Candidate-RP Table

rcPimCandidateRPTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RcPimCandidateRPEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table listing the IP multicast groups for
            which the local router is to advertise itself as a
            Candidate-RP when the value of rcPimCandidateRPHoldTime is
            non-zero.  If this table is empty, then the local router
            will advertise itself as a Candidate-RP for all groups
            (providing the value of rcPimCandidateRPHoldTime is non-
            zero)."
    ::= { rcPimMIBObjects 11 }

rcPimCandidateRPEntry OBJECT-TYPE
    SYNTAX     RcPimCandidateRPEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rcPimCandidateRPTable."
    INDEX      { rcPimCandidateRPGroupAddress,
                 rcPimCandidateRPGroupMask, rcPimCandidateRPAddress }
    ::= { rcPimCandidateRPTable 1 }

RcPimCandidateRPEntry ::= SEQUENCE {
    rcPimCandidateRPGroupAddress    IpAddress,
    rcPimCandidateRPGroupMask       IpAddress,
    rcPimCandidateRPAddress         IpAddress,
    rcPimCandidateRPRowStatus       RowStatus
}

rcPimCandidateRPGroupAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The IP multicast group address which, when combined with
            rcPimCandidateRPGroupMask, identifies a group prefix for which
            the local router will advertise itself as a Candidate-RP."
    ::= { rcPimCandidateRPEntry 1 }

rcPimCandidateRPGroupMask OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The multicast group address mask which, when combined with
            rcPimCandidateRPGroupMask, identifies a group prefix for which
            the local router will advertise itself as a Candidate-RP."
    ::= { rcPimCandidateRPEntry 2 }

rcPimCandidateRPAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The (unicast) address of the interface which will be
            advertised as a Candidate-RP."
    ::= { rcPimCandidateRPEntry 3 }

rcPimCandidateRPRowStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The status of this row, by which new entries may be
            created, or old entries deleted from this table."
    ::= { rcPimCandidateRPEntry 4 }
    
-- The PIM Component Table

rcPimComponentTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RcPimComponentEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing objects specific to a PIM
            domain.  One row exists for each domain to which the router
            is connected."
    ::= { rcPimMIBObjects 12 }

rcPimComponentEntry OBJECT-TYPE
    SYNTAX     RcPimComponentEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the rcPimComponentTable."
    INDEX      { rcPimComponentIndex }
    ::= { rcPimComponentTable 1 }

RcPimComponentEntry ::= SEQUENCE {
    rcPimComponentIndex              InterfaceIndexOrZero,
    rcPimComponentBSRAddress         IpAddress,
    rcPimComponentBSRExpiryTime      TimeTicks,
    rcPimComponentCRPHoldTime        Integer32,
    rcPimComponentStatus             RowStatus
}

rcPimComponentIndex OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A number uniquely identifying the component.  Each protocol
            instance connected to a separate domain should have a
            different index value."
    ::= { rcPimComponentEntry 1 }

rcPimComponentBSRAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The IP address of the bootstrap router (BSR) for the local
            PIM region."
    ::= { rcPimComponentEntry 2 }

rcPimComponentBSRExpiryTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The minimum time remaining before the bootstrap router in
            the local domain will be declared down.  For candidate BSRs,
            this is the time until the component sends an RP-Set
            message.  For other routers, this is the time until it may
            accept an RP-Set message from a lower candidate BSR."
    ::= { rcPimComponentEntry 3 }

rcPimComponentCRPHoldTime OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    UNITS      "seconds"
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The holdtime of the component when it is a candidate RP in
            the local domain.  The value of 0 is used to indicate that
            the local system is not a Candidate-RP."
    DEFVAL     { 0 }
    ::= { rcPimComponentEntry 4 }

rcPimComponentStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The status of this entry.  Creating the entry creates
            another protocol instance; destroying the entry disables a
            protocol instance."
    ::= { rcPimComponentEntry 5 }

-- conformance information

rcPimMIBConformance OBJECT IDENTIFIER ::= { rcPim 2 }
rcPimMIBCompliances OBJECT IDENTIFIER ::= { rcPimMIBConformance 1 }
rcPimMIBGroups      OBJECT IDENTIFIER ::= { rcPimMIBConformance 2 }

rcPimSparseV2MIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running PIM Sparse
            Mode and implementing the PIM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { rcPimV2MIBGroup }

    OBJECT     rcPimInterfaceStatus
    MIN-ACCESS read-only
    DESCRIPTION
             "Write access is not required."

    ::= { rcPimMIBCompliances 2 }

rcPimDenseV2MIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running PIM Dense Mode
            and implementing the PIM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { rcPimDenseV2MIBGroup }

    OBJECT     rcPimInterfaceStatus
    MIN-ACCESS read-only
    DESCRIPTION
             "Write access is not required."

    ::= { rcPimMIBCompliances 3 }


-- units of conformance

rcPimV2MIBGroup OBJECT-GROUP
    OBJECTS { rcPimJoinPruneInterval, rcPimNeighborIfIndex,
              rcPimNeighborUpTime, rcPimNeighborExpiryTime,
              rcPimInterfaceAddress, rcPimInterfaceNetMask,
              rcPimInterfaceDR, rcPimInterfaceHelloInterval,
              rcPimInterfaceStatus, rcPimInterfaceJoinPruneInterval,
              rcPimInterfaceCBSRPreference, rcPimInterfaceMode,
              rcPimRPSetHoldTime, rcPimRPSetExpiryTime,
              rcPimComponentBSRAddress, rcPimComponentBSRExpiryTime,
              rcPimComponentCRPHoldTime, rcPimComponentStatus

            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of PIM Sparse
            Mode (version 2) routers."
    ::= { rcPimMIBGroups 2 }

rcPimDenseV2MIBGroup OBJECT-GROUP
    OBJECTS { rcPimNeighborIfIndex,
              rcPimNeighborUpTime, rcPimNeighborExpiryTime,
              rcPimInterfaceAddress, rcPimInterfaceNetMask,
              rcPimInterfaceDR, rcPimInterfaceHelloInterval,
              rcPimInterfaceStatus, rcPimInterfaceMode
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of PIM Dense
            Mode (version 2) routers."
    ::= { rcPimMIBGroups 5 }

rcPimV2CandidateRPMIBGroup OBJECT-GROUP
    OBJECTS { rcPimCandidateRPAddress,
              rcPimCandidateRPRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support configuration of which
            groups a router is to advertise itself as a Candidate-RP."
    ::= { rcPimMIBGroups 3 }
    
END