--/* -- * Copyright (c) 2000-2004 Foundry Networks Inc., All Rights Reserved. -- */ FOUNDRY-WIRELESS-AP-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, TimeTicks FROM SNMPv2-SMI IpAddress, enterprises FROM RFC1155-SMI ; MacAddress ::= OCTET STRING(SIZE (6)) DisplayString ::= OCTET STRING TruthValue ::= INTEGER { false(2), true(1) } --iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).foundry(1991).products(1).wirelessAp(6).enterpriseAP(1) foundry OBJECT IDENTIFIER ::= { enterprises 1991 } products OBJECT IDENTIFIER ::= { foundry 1 } wirelessAp OBJECT IDENTIFIER ::= { products 6 } enterpriseAp OBJECT IDENTIFIER ::= { wirelessAp 1 } apSysObjectIds OBJECT IDENTIFIER ::= { wirelessAp 2 } wirelessApFamily OBJECT IDENTIFIER ::= { apSysObjectIds 1 } wirelessApSwitch OBJECT IDENTIFIER ::= { wirelessApFamily 1 } enterpriseApSys OBJECT IDENTIFIER ::= { enterpriseAp 1 } enterpriseApLineMgnt OBJECT IDENTIFIER ::= { enterpriseAp 2 } enterpriseApPortMgnt OBJECT IDENTIFIER ::= { enterpriseAp 3 } enterpriseApFileTransferMgt OBJECT IDENTIFIER ::= { enterpriseAp 4 } enterpriseApResetMgt OBJECT IDENTIFIER ::= { enterpriseAp 5 } enterpriseApIpMgt OBJECT IDENTIFIER ::= { enterpriseAp 6 } enterpriseAPdot11 OBJECT IDENTIFIER ::= { enterpriseAp 7 } enterpriseApAdmin OBJECT IDENTIFIER ::= { enterpriseAp 8 } enterpriseApVLAN OBJECT IDENTIFIER ::= { enterpriseAp 9 } enterpriseApFilterControl OBJECT IDENTIFIER ::= { enterpriseAp 10 } enterpriseApSNTP OBJECT IDENTIFIER ::= { enterpriseAp 11 } enterpriseApDNS OBJECT IDENTIFIER ::= { enterpriseAp 12 } enterpriseApSyslog OBJECT IDENTIFIER ::= { enterpriseAp 13 } enterpriseApSecurity OBJECT IDENTIFIER ::= { enterpriseAp 14 } enterpriseApRadio OBJECT IDENTIFIER ::= { enterpriseAp 15 } enterpriseApSNMP OBJECT IDENTIFIER ::= { enterpriseAp 16 } enterpriseApSession OBJECT IDENTIFIER ::= { enterpriseAp 17 } enterpriseApIapp OBJECT IDENTIFIER ::= { enterpriseAp 18 } enterpriseApEventLog OBJECT IDENTIFIER ::= { enterpriseAp 19 } enterpriseApVapRadio OBJECT IDENTIFIER ::= { enterpriseAp 20 } -- **************************************************************************************** -- enterpriseApSys - Standard Mib elements -- **************************************************************************************** swHardwareVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware version of the main board." ::= { enterpriseApSys 1 } swBootRomVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Boot ROM code version of the main board." ::= { enterpriseApSys 2 } swOpCodeVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Operation code version of the main board." ::= { enterpriseApSys 3 } swSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number of the Access Point." ::= { enterpriseApSys 4 } swCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION "Country code: AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA, AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS, BE-BELGIUM, BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI_DARUSSALAM, BG-BULGARIA, CA-CANADA, CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA_RICA, HR-CROATIA, CY-CYPRUS, CZ-CZECH_REPUBLIC, DK-DENMARK, DO-DOMINICAN_REPUBLIC, EC-ECUADOR, EG-EGYPT, EE-ESTONIA, FI-FINLAND, FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA, HK-HONG_KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA, ID-INDONESIA, IR-IRAN, IE-IRELAND, IL-ISRAEL, IT-ITALY, JP-JAPAN, JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH KOREA, KR-KOREA_REPUBLIC, KW-KUWAIT, LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA, LU-LUXEMBOURG, MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MX-MEXICO, MC-MONACO, MA-MOROCCO, NL-NETHERLANDS, NZ-NEW_ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN, PA-PANAMA, PE-PERU, PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO_RICO, QA-QATAR, RO-ROMANIA, RU-RUSSIA, SA-SAUDI_ARABIA, SG-SINGAPORE, SK-SLOVAK_REPUBLIC, SI-SLOVENIA, ZA-SOUTH_AFRICA, ES-SPAIN, SE-SWEDEN, CH-SWITZERLAND, SY-SYRIA, TW-TAIWAN, TH-THAILAND, TR-TURKEY, UA-UKRAINE, AE-UNITED_ARAB_EMIRATES, GB-UNITED_KINGDOM, US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM" ::= { enterpriseApSys 5 } -- **************************************** -- anilg:09/22/2003 added for traps -- **************************************** sysNotificationTree OBJECT IDENTIFIER ::= { enterpriseApSys 6 } sysNotificationObjects OBJECT IDENTIFIER ::= { sysNotificationTree 1 } -- no objects for now (but just to keep consistent with the overall system design sysNotifications OBJECT IDENTIFIER ::= { sysNotificationTree 2 } sysSystemUp NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The system up notification shall be sent when the AP is fully up and running." ::= { sysNotifications 1 } sysSystemDown NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The system down notification shall be sent before the AP is about to reboot." ::= { sysNotifications 2 } sysRadiusServerChanged NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary." ::= { sysNotifications 3 } sysConfigFileVersionChanged NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The Config file version changed notification shall be sent when the version of the AP's configuration file has changed." ::= { sysNotifications 4 } -- **************************************************************************************** -- **************************************************************************************** -- enterpriseApLine AP Line elements -- **************************************************************************************** lineTable OBJECT-TYPE SYNTAX SEQUENCE OF LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each RS-232 line in this system" ::= { enterpriseApLineMgnt 1 } lineEntry OBJECT-TYPE SYNTAX LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration in one RS232 line of the Access Point." INDEX { lineIndex } ::= { lineTable 1 } LineEntry ::= SEQUENCE { lineIndex Integer32, lineDataBits Integer32, lineParity INTEGER, lineSpeed Integer32, lineStopBits Integer32 } lineIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is defined as RS-232 index." ::= { lineEntry 1 } lineDataBits OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is defined as number of data bits for the RS232 interface." ::= { lineEntry 2 } lineParity OBJECT-TYPE SYNTAX INTEGER { none(99), odd(1), even(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is defined as parity of the RS232 interface." ::= { lineEntry 3 } lineSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is defined as the speed of the RS-232 interface." ::= { lineEntry 4 } lineStopBits OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is defined as the number of stop bits for the RS-232 interface." ::= { lineEntry 5 } -- **************************************************************************************** -- enterpriseApPortMgnt - Port Mib elements -- **************************************************************************************** portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel)." ::= { enterpriseApPortMgnt 1 } portEntry OBJECT-TYPE SYNTAX PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration in one switch port of the switch." INDEX { portIndex } ::= { portTable 1 } PortEntry ::= SEQUENCE { portIndex Integer32, portName DisplayString, portType INTEGER, portSpeedDpxCfg INTEGER, portFlowCtrlCfg INTEGER, portCapabilities INTEGER, portAutonegotiation INTEGER, portSpeedDpxStatus INTEGER, portFlowCtrlStatus INTEGER } portIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is defined as ifIndex in the IF-MIB." ::= { portEntry 1 } portName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later)." ::= { portEntry 2 } portType OBJECT-TYPE SYNTAX INTEGER { other(1), hundredBaseTX(2), hundredBaseFX(3), thousandBaseSX(4), thousandBaseLX(5), thousandBaseT(6), thousandBaseGBIC(7), thousandBaseMiniGBIC(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port type." ::= { portEntry 3 } portSpeedDpxCfg OBJECT-TYPE SYNTAX INTEGER { auto(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus." DEFVAL { halfDuplex10 } ::= { portEntry 4 } portFlowCtrlCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus." DEFVAL { enabled } ::= { portEntry 5 } portCapabilities OBJECT-TYPE -- INTEGER should be bits SYNTAX INTEGER { portCap10half(99), portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), portCapSym(14), portCapFlowCtrl(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port capabilities." ::= { portEntry 6 } portAutonegotiation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether autonegotiation is enabled." ::= { portEntry 7 } portSpeedDpxStatus OBJECT-TYPE SYNTAX INTEGER { error(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1)." ::= { portEntry 8 } portFlowCtrlStatus OBJECT-TYPE SYNTAX INTEGER { error(1), backPressure(2), dot3xFlowControl(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1)." ::= { portEntry 9 } -- **************************************************************************************** -- enterpriseApTftpMgt - File Transfer Mib elements -- **************************************************************************************** transferType OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of file to transfer." ::= { enterpriseApFileTransferMgt 1 } fileType OBJECT-TYPE SYNTAX INTEGER { application(1), config(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of file to transfer." ::= { enterpriseApFileTransferMgt 2 } srcFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified." ::= { enterpriseApFileTransferMgt 3 } destFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified." ::= { enterpriseApFileTransferMgt 4 } fileServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified." ::= { enterpriseApFileTransferMgt 5 } userName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The username specified for an FTP Transfer." ::= { enterpriseApFileTransferMgt 6 } password OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password specified for an FTP Transfer." ::= { enterpriseApFileTransferMgt 7 } status OBJECT-TYPE SYNTAX INTEGER { running(1), success(2), failureGeneric(3), flashOpenError(10), flashMallocError(11), flashReadError(12), flashFtypeError(13), socketWriteError(20), protocolError(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the transfer." ::= { enterpriseApFileTransferMgt 8 } transferStart OBJECT-TYPE SYNTAX INTEGER { download(1), upload(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to go(1) to start a transfer." ::= { enterpriseApFileTransferMgt 9 } -- **************************************************************************************** -- enterpriseApResetMgt - Reset Mib elements -- **************************************************************************************** restartOpCodeFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of op-code file for start-up." ::= { enterpriseApResetMgt 1 } restartControl OBJECT-TYPE SYNTAX INTEGER { running(1), warmBoot(2), coldBoot(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1)." ::= { enterpriseApResetMgt 2 } -- **************************************************************************************** -- enterpriseApIpMgnt - Ip Mib elements -- **************************************************************************************** netConfigIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device)." ::= { enterpriseApIpMgt 1 } netConfigSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device)." ::= { enterpriseApIpMgt 2 } netConfigDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0." ::= { enterpriseApIpMgt 3 } netConfigHttpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether HTTP is enabled." ::= { enterpriseApIpMgt 4 } netConfigHttpPort OBJECT-TYPE SYNTAX INTEGER (514..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port number for HTTP." ::= { enterpriseApIpMgt 5 } netConfigHttpsState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether Secure HTTP is enabled." ::= { enterpriseApIpMgt 6 } netConfigHttpsPort OBJECT-TYPE SYNTAX INTEGER (514..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port number for Secure HTTP." ::= { enterpriseApIpMgt 7 } netConfigDHCPState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether DHCP is enabled." ::= { enterpriseApIpMgt 8 } -- **************************************************************************************** -- enterpriseAPdot11 - 802.11 MIB elements -- **************************************************************************************** dot11AuthenticationEntry OBJECT IDENTIFIER ::= { enterpriseAPdot11 1 } dot118021xState OBJECT-TYPE SYNTAX INTEGER { disabled(0), supported(1), required(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm." ::= { dot11AuthenticationEntry 1 } dot118021xBroadcastKeyRefreshRate OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The number (in minutes) between changing the broadcast key for 802.1x and WPA clients" ::= { dot11AuthenticationEntry 2 } dot118021xSessionKeyRefreshRate OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The number (in minutes) between changing session keys for 802.1x and WPA clients" ::= { dot11AuthenticationEntry 3 } dot118021xReauthenticationTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The number (in minutes) between forcing 802.1x clients to reauthenticate" ::= { dot11AuthenticationEntry 4 } dot11MACAuthenticationType OBJECT-TYPE SYNTAX INTEGER { disabled(0), local(1), radius(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This value indicates the type of mac authentication in use." ::= { dot11AuthenticationEntry 5 } -- ********************************************************************** -- * End of dot11Authentication TABLE -- ********************************************************************** -- ********************************************************************** -- * dot11AuthenticationServer TABLE -- ********************************************************************** dot11AuthenticationServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11AuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each authentication server." ::= { enterpriseAPdot11 2 } dot11AuthenticationServerEntry OBJECT-TYPE SYNTAX Dot11AuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one authentication server of the AP." INDEX { dot11AuthenticationServerIndex } ::= { dot11AuthenticationServerTable 1 } Dot11AuthenticationServerEntry ::= SEQUENCE { dot11AuthenticationServerIndex Integer32, dot11AuthenticationServer IpAddress, dot11AuthenticationPort INTEGER, dot11AuthenticationKey DisplayString, dot11AuthenticationRetransmit INTEGER, dot11AuthenticationTimeout INTEGER, dot11AuthenticationAcctPort INTEGER, dot11AuthenticationInterimUpdate INTEGER, dot11AuthenticationVlanIdFormat INTEGER } dot11AuthenticationServerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Authentication Server" ::= { dot11AuthenticationServerEntry 1 } dot11AuthenticationServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the IP address of the authentication server." ::= { dot11AuthenticationServerEntry 2 } dot11AuthenticationPort OBJECT-TYPE SYNTAX INTEGER (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the UDP Port used by the authentication server." ::= { dot11AuthenticationServerEntry 3 } dot11AuthenticationKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the shared key used by the authentication server." ::= { dot11AuthenticationServerEntry 4 } dot11AuthenticationRetransmit OBJECT-TYPE SYNTAX INTEGER (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the retransmit timer length used by the authentication server." ::= { dot11AuthenticationServerEntry 5 } dot11AuthenticationTimeout OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the Timeout value(sec) used by the authentication server." ::= { dot11AuthenticationServerEntry 6 } dot11AuthenticationAcctPort OBJECT-TYPE SYNTAX INTEGER (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port number for radius server accounting." ::= { dot11AuthenticationServerEntry 7 } dot11AuthenticationInterimUpdate OBJECT-TYPE SYNTAX INTEGER (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the Timeout value(sec) used by the radius server interim update." ::= { dot11AuthenticationServerEntry 8 } dot11AuthenticationVlanIdFormat OBJECT-TYPE SYNTAX INTEGER { hex(1), ascii(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the valn id format." ::= { dot11AuthenticationServerEntry 9 } -- ********************************************************************** -- * End of dot11AuthenticationServer TABLE -- ********************************************************************** -- ********************************************************************** -- * dot11FilteringTable TABLE -- ********************************************************************** dot11Filter OBJECT IDENTIFIER ::= { enterpriseAPdot11 3 } dot11FilterDefault OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the default access for local mac filters." ::= { dot11Filter 1 } dot11FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of status information about each configured MAC Address Filtering Entry." ::= { dot11Filter 2 } dot11FilterEntry OBJECT-TYPE SYNTAX Dot11FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { dot11FilterAddress } ::= { dot11FilterTable 1 } Dot11FilterEntry ::= SEQUENCE { dot11FilterAddress MacAddress, dot11FilterStatus INTEGER } dot11FilterAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This value indicates the MAC address of the filter entry." ::= { dot11FilterEntry 1 } dot11FilterStatus OBJECT-TYPE SYNTAX INTEGER { allowed(30), denied(31), delete(32) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client." ::= { dot11FilterEntry 2 } -- ********************************************************* -- anilg: 09/22/03 :notifications used for dot11 management -- ********************************************************* dot11NotificationTree OBJECT IDENTIFIER ::= { enterpriseAPdot11 4 } dot11NotificationObjects OBJECT IDENTIFIER ::= { dot11NotificationTree 1 } dot11MacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac Address of the affected interface, returned with traps only." ::= { dot11NotificationObjects 1 } dot11Station OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute holds the MAC address of the wireless station" ::= { dot11NotificationObjects 2 } dot11RequestType OBJECT-TYPE SYNTAX INTEGER { unknown(1), association(2), reAssociation(3), authentication(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request Value = 4: Authentication" ::= { dot11NotificationObjects 3 } dot11ReasonCode OBJECT-TYPE SYNTAX INTEGER { invalidModeOrState(1), unAuthenticatedStation(2), internalError(3), outOfSequenceFrame(4), unsupportedAlgorithm(5), invalidFrameLngth(6), wepRequiredOnAP(7), wepNotAllowed(8), challengeTextMismatch(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated. Value = 3: Internal error Value = 4: Out of sequence frame Value = 5: Un-supportd algorithm Value = 6: Invalid frame length Value = 7: WEP is required on the AP Value = 8: WEP not allowed Value = 9: Challenge text mismatch" ::= { dot11NotificationObjects 4 } dot11ApIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the IP address of the Access Point" ::= { dot11NotificationObjects 5 } dot1xAuthenticatorMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute holds the MAC address of the authenticator for the AP." ::= { dot11NotificationObjects 6 } externalAntennaStatus OBJECT-TYPE SYNTAX INTEGER { attached(1), detached(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute tells whether the external antenna is attached or detached." ::= { dot11NotificationObjects 7 } apRadio OBJECT-TYPE SYNTAX INTEGER { radioA(1), radioBg(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute tells what radio the notification occurred on." ::= { dot11NotificationObjects 8 } apVap OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute tells what Vap the notification occurred on." ::= { dot11NotificationObjects 9 } dot11Notifications OBJECT IDENTIFIER ::= { dot11NotificationTree 2 } dot11StationAssociation NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated." ::= { dot11Notifications 1 } dot11StationReAssociation NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated." ::= { dot11Notifications 2 } dot11StationAuthentication NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the MAC address of the station that has authenticated." ::= { dot11Notifications 3 } -- Note that the following is different from the standard 802.11 mib dot11AuthenticateFail Notification -- This one also has a reason code within the trap. dot11StationRequestFail NOTIFICATION-TYPE OBJECTS { dot11Station, dot11RequestType, dot11ReasonCode } STATUS current DESCRIPTION "The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall include the MAC address of the station and the reason code for the failure." ::= { dot11Notifications 4 } dot11InterfaceBFail NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The InterfaceBFail notification shall be sent out when 802.11b wireless interface has failed." ::= { dot11Notifications 5 } dot11InterfaceAGFail NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The InterfaceAGFail notification shall be sent out when 802.11a/802.11g wireless interface has failed." ::= { dot11Notifications 6 } dot1xMacAddrAuthSuccess NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The 802.1x MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated." ::= { dot11Notifications 7 } dot1xMacAddrAuthFail NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The 802.1x MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate." ::= { dot11Notifications 8 } dot1xAuthNotInitiated NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The 802.1x authentication not initiated notification shall be sent when a station did not initiate 802.1x authentication with the RADIUS server. The value of the notification shall include the MAC address of the station that did not initiate 802.1x authentication." ::= { dot11Notifications 9 } dot1xAuthSuccess NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The 802.1x authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated." ::= { dot11Notifications 10 } dot1xAuthFail NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The 802.1x authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate." ::= { dot11Notifications 11 } localMacAddrAuthSuccess NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated." ::= { dot11Notifications 12 } localMacAddrAuthFail NOTIFICATION-TYPE OBJECTS { dot11Station } STATUS current DESCRIPTION "The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated." ::= { dot11Notifications 13 } pppLogonFail NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password." ::= { dot11Notifications 14 } iappStationRoamedFrom NOTIFICATION-TYPE OBJECTS { dot11Station, dot11ApIpAddress} STATUS current DESCRIPTION "The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include the MAC address of the station and the IP address of the old AP." ::= { dot11Notifications 15 } iappStationRoamedTo NOTIFICATION-TYPE OBJECTS { dot11Station, dot11ApIpAddress} STATUS current DESCRIPTION "The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include the MAC address of the station and the IP address of the new AP." ::= { dot11Notifications 16 } iappContextDataSent NOTIFICATION-TYPE OBJECTS { dot11Station, dot11ApIpAddress} STATUS current DESCRIPTION "The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associated. The notification shall include the MAC address of the station and the IP address of the new AP." ::= { dot11Notifications 17 } dot1xSupplicantAuthenticated NOTIFICATION-TYPE OBJECTS { dot1xAuthenticatorMacAddr } STATUS current DESCRIPTION "The notification shall be sent when the AP has successfully authenticated with the switch. The value of the notification shall include the MAC address of the switch (authenticator) that the AP has authenticated with." ::= { dot11Notifications 18 } wirelessExternalAntenna NOTIFICATION-TYPE OBJECTS { externalAntennaStatus } STATUS current DESCRIPTION "The notification shall be sent when the external antenna has been attached or detached from the wireless 11g interface." ::= { dot11Notifications 19 } micFail NOTIFICATION-TYPE OBJECTS { dot1xAuthenticatorMacAddr } STATUS current DESCRIPTION "The notification shall be sent when the AP has detected MIC failures." ::= { dot11Notifications 20 } seqErr NOTIFICATION-TYPE OBJECTS { dot1xAuthenticatorMacAddr } STATUS current DESCRIPTION "The notification shall be sent when the AP has detected replay attack." ::= { dot11Notifications 21 } -- **************************************************************************************** -- dot11AuthenticationSupplicantTable -- **************************************************************************************** dot11AuthenticationSupplicantTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11AuthenticationSupplicantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of supplicant" ::= { enterpriseAPdot11 5 } dot11AuthenticationSupplicantEntry OBJECT-TYPE SYNTAX Dot11AuthenticationSupplicantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one supplicant." INDEX { dot118021xSuppIndex } ::= { dot11AuthenticationSupplicantTable 1 } Dot11AuthenticationSupplicantEntry ::= SEQUENCE { dot118021xSuppIndex Integer32, dot118021xSuppState INTEGER, dot118021xSuppUser DisplayString, dot118021xSuppPasswd DisplayString } dot118021xSuppIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the interface for which this supplicant is running. Currently only the ethernet interface." ::= { dot11AuthenticationSupplicantEntry 1 } dot118021xSuppState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable the 802.1x supplicant." ::= { dot11AuthenticationSupplicantEntry 2 } dot118021xSuppUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY." ::= { dot11AuthenticationSupplicantEntry 3 } dot118021xSuppPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY." ::= { dot11AuthenticationSupplicantEntry 4 } -- ********************************************************************** -- * dot11VapAuthenticationEntry TABLE -- ********************************************************************** dot11VapAuthenticationTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11VapAuthenticationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of 8021x for each Vap." ::= { enterpriseAPdot11 6 } dot11VapAuthenticationEntry OBJECT-TYPE SYNTAX Dot11VapAuthenticationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of 8021x for each Vap of the AP." INDEX { dot11Vap8021xIndex } ::= { dot11VapAuthenticationTable 1 } Dot11VapAuthenticationEntry ::= SEQUENCE { dot11Vap8021xIndex Integer32, dot11Vap8021xState INTEGER, dot11Vap8021xBroadcastKeyRefreshRate INTEGER, dot11Vap8021xSessionKeyRefreshRate INTEGER, dot11Vap8021xReauthenticationTimeout INTEGER } dot11Vap8021xIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for configuration." ::= { dot11VapAuthenticationEntry 1 } dot11Vap8021xState OBJECT-TYPE SYNTAX INTEGER { disabled(0), supported(1), required(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm." ::= { dot11VapAuthenticationEntry 2 } dot11Vap8021xBroadcastKeyRefreshRate OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The number (in minutes) between changing the broadcast key for 802.1x and WPA clients" ::= { dot11VapAuthenticationEntry 3 } dot11Vap8021xSessionKeyRefreshRate OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The number (in minutes) between changing session keys for 802.1x and WPA clients" ::= { dot11VapAuthenticationEntry 4 } dot11Vap8021xReauthenticationTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The number (in minutes) between forcing 802.1x clients to reauthenticate" ::= { dot11VapAuthenticationEntry 5 } -- ********************************************************************** -- * End of dot11VapAuthentication TABLE -- ********************************************************************** -- **************************************************************************************** -- enterpriseApAdmin - Admin Mib elements -- **************************************************************************************** enterpriseApAdminUser OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the username for management login." ::= { enterpriseApAdmin 1 } enterpriseApAdminPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the password for management login." ::= { enterpriseApAdmin 2 } -- **************************************************************************************** -- enterpriseApVLAN - VLAN Mib elements -- **************************************************************************************** enterpriseApVLANNativeId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the native VLAN id." ::= { enterpriseApVLAN 1 } enterpriseApVLANState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether VLANs are enabled or disabled." ::= { enterpriseApVLAN 2 } enterpriseApNativeVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApNativeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used to manage the Vlans for each wireless interface." ::= { enterpriseApVLAN 3 } enterpriseApNativeVlanEntry OBJECT-TYPE SYNTAX EnterpriseApNativeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about vlan configuration of one wireless interface." INDEX { nativeVlanIfIndex, nativeVlanSsidNumber } ::= { enterpriseApNativeVlanTable 1 } EnterpriseApNativeVlanEntry ::= SEQUENCE { nativeVlanIfIndex Integer32, nativeVlanSsidNumber Integer32, nativeVlanVlanId Integer32 } nativeVlanIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index of the wireless interface for which the vlan is assigned to." ::= { enterpriseApNativeVlanEntry 1 } nativeVlanSsidNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Associated Number for Service Set Id (SSID) of the wireless interface for which the vlan is assigned to. Note: This is for future support of multiple SSIDs per radio interface." ::= { enterpriseApNativeVlanEntry 2 } nativeVlanVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the native VLAN id of the wireless interface associated with the if index and the SSID number(if it is not 0)." ::= { enterpriseApNativeVlanEntry 3 } -- **************************************************************************************** -- enterpriseApFilterControl - Filter Control Mib elements -- **************************************************************************************** enterpriseApFilterControlBridge OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the local bridge filter setting." ::= { enterpriseApFilterControl 1 } enterpriseApFilterControlAPManage OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the AP management filter setting." ::= { enterpriseApFilterControl 2 } enterpriseApFilterControlEthernet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the ethernet filter setting." ::= { enterpriseApFilterControl 3 } enterpriseApFilterProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApFilterProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of the filter protocol table." ::= { enterpriseApFilterControl 4 } enterpriseApFilterProtocolEntry OBJECT-TYPE SYNTAX EnterpriseApFilterProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the filter protocol table, containing information about configuration of one filter table entry." INDEX { enterpriseApFilterProtocolIndex } ::= { enterpriseApFilterProtocolTable 1 } EnterpriseApFilterProtocolEntry ::= SEQUENCE { enterpriseApFilterProtocolIndex Integer32, enterpriseApFilterProtocolName DisplayString, enterpriseApFilterProtocolISODesignator DisplayString, enterpriseApFilterProtocolState INTEGER } enterpriseApFilterProtocolIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Protocol Filters." ::= { enterpriseApFilterProtocolEntry 1 } enterpriseApFilterProtocolName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the name of the protocol filter. One of the following: Airfortress, Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, Cranite, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new), Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3 " ::= { enterpriseApFilterProtocolEntry 2 } enterpriseApFilterProtocolISODesignator OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the name of the protocol filter." ::= { enterpriseApFilterProtocolEntry 3 } enterpriseApFilterProtocolState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), managementonly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the protocol filter is enabled and if enabled if it is for management only." ::= { enterpriseApFilterProtocolEntry 4 } enterpriseApDynamicFilterProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApDynamicFilterProtocolEntry MAX-ACCESS read-only STATUS current DESCRIPTION "Table of descriptive and status information about configuration of the dynamic filter protocol table." ::= { enterpriseApFilterControl 5 } enterpriseApDynamicFilterProtocolEntry OBJECT-TYPE SYNTAX EnterpriseApDynamicFilterProtocolEntry MAX-ACCESS read-only STATUS current DESCRIPTION "An entry in the filter dynamic protocol table, containing information about configuration of one dynamic filter table entry." INDEX { enterpriseApDynamicFilterProtocolIndex } ::= { enterpriseApDynamicFilterProtocolTable 1 } EnterpriseApDynamicFilterProtocolEntry ::= SEQUENCE { enterpriseApDynamicFilterProtocolIndex Integer32, enterpriseApDynamicFilterProtocolName DisplayString, enterpriseApDynamicFilterProtocolISODesignator DisplayString, enterpriseApDynamicFilterProtocolState INTEGER } enterpriseApDynamicFilterProtocolIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the Dynamic Protocol Filters." ::= { enterpriseApDynamicFilterProtocolEntry 1 } enterpriseApDynamicFilterProtocolName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the name of the dynamic protocol filter." ::= { enterpriseApDynamicFilterProtocolEntry 2 } enterpriseApDynamicFilterProtocolISODesignator OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This value is the ISO Designator for the protocol in ascii hex format." ::= { enterpriseApDynamicFilterProtocolEntry 3 } enterpriseApDynamicFilterProtocolState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), managementonly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dynamic protocol filter is enabled." ::= { enterpriseApDynamicFilterProtocolEntry 4 } -- **************************************************************************************** -- enterpriseApSNTP - SNTP Mib elements -- **************************************************************************************** enterpriseApSNTPState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether SNTP is enabled or not. At least one of the SNTP servers must have a valid IP address before SNTP can be enabled." ::= { enterpriseApSNTP 1 } enterpriseApSNTPPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the IP address of the primary SNTP server." ::= { enterpriseApSNTP 2 } enterpriseApSNTPSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the IP address of the secondary SNTP server." ::= { enterpriseApSNTP 3 } enterpriseApSNTPTimezone OBJECT-TYPE SYNTAX INTEGER { enewetakKwajalein(0), midwayIsland(1), hawaii(2), alaska(3), pacific(4), arizona(5), mountain(6), central(7), mexicoCity(8), saskatchewan(9), bogota(10), eastern(11), indiana(12), atlantic(13), caracas(14), santiago(15), newfoundland(16), brasilia(17), buenos(18), midAtlantic(19), azores(20), casablanca(21), greenwichMeanTimeDublin(22), greenwichMeanTimeLisbon(23), amsterdam(24), stockhoim(25), bratislava(26), prague(27), paris(28), sofija(29), athens(30), bucharest(31), cairo(32), harare(33), helsinki(34), israel(35), baghdad(36), moscow(37), tehran(38), abuDhabi(39), vogograd(40), islamabad(41), almaty(42), bangkok(43), beijing(44), taipei(45), tokyo(46), brisbane(47), canberra(48), guam(49), hobart(50), magadan(51), fiji(52), wellington(53) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates which timezone to use." ::= { enterpriseApSNTP 4 } enterpriseApSNTPDST OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether Daylight Savings Time is enabled or not." ::= { enterpriseApSNTP 5 } enterpriseApSNTPDSTStartMonth OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the starting month for Daylight Savings Time." ::= { enterpriseApSNTP 6 } enterpriseApSNTPDSTStartDay OBJECT-TYPE SYNTAX INTEGER (1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the starting day for Daylight Savings Time." ::= { enterpriseApSNTP 7 } enterpriseApSNTPDSTEndMonth OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the ending month for Daylight Savings Time." ::= { enterpriseApSNTP 8 } enterpriseApSNTPDSTEndDay OBJECT-TYPE SYNTAX INTEGER (1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the ending day for Daylight Savings Time." ::= { enterpriseApSNTP 9 } -- **************************************** -- anilg:09/19/2003 added for traps -- **************************************** sntpNotificationTree OBJECT IDENTIFIER ::= { enterpriseApSNTP 10 } sntpNotificationObjects OBJECT IDENTIFIER ::= { sntpNotificationTree 1 } -- no objects for now (but just to keep consistent with the overall system design sntpNotifications OBJECT IDENTIFIER ::= { sntpNotificationTree 2 } sntpServerFail NOTIFICATION-TYPE -- OBJECTS { } STATUS current DESCRIPTION "The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server." ::= { sntpNotifications 1 } -- **************************************************************************************** -- enterpriseApDNS - DNS Mib elements -- **************************************************************************************** enterpriseApDNSPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the IP address of the primary DNS server." ::= { enterpriseApDNS 1 } enterpriseApDNSSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the IP address of the secondary DNS server." ::= { enterpriseApDNS 2 } -- **************************************************************************************** -- enterpriseApSyslog - Syslog Mib elements -- **************************************************************************************** enterpriseApSyslogState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether syslog is enabled." ::= { enterpriseApSyslog 1 } enterpriseApSyslogConsoleState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether syslog console logging is enabled." ::= { enterpriseApSyslog 2 } enterpriseApSyslogLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the syslog logging level." ::= { enterpriseApSyslog 3 } -- ********************************************************************** -- * EnterpriseApSyslogServer TABLE -- ********************************************************************** enterpriseApSyslogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApSyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each syslog server." ::= { enterpriseApSyslog 4 } enterpriseApSyslogServerEntry OBJECT-TYPE SYNTAX EnterpriseApSyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one syslog server of the AP." INDEX { enterpriseApSyslogServerIndex } ::= { enterpriseApSyslogServerTable 1 } EnterpriseApSyslogServerEntry ::= SEQUENCE { enterpriseApSyslogServerIndex Integer32, enterpriseApSyslogServerState INTEGER, enterpriseApSyslogServerIPAddress IpAddress, enterpriseApSyslogServerPort INTEGER } enterpriseApSyslogServerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Syslog Server" ::= { enterpriseApSyslogServerEntry 1 } enterpriseApSyslogServerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the syslog server is enabled." ::= { enterpriseApSyslogServerEntry 2 } enterpriseApSyslogServerIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the IP address of the syslog server." ::= { enterpriseApSyslogServerEntry 3 } enterpriseApSyslogServerPort OBJECT-TYPE SYNTAX INTEGER (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the UDP Port used by the syslog server." ::= { enterpriseApSyslogServerEntry 4 } -- ********************************************************************** -- * EnterpriseApSecurity TABLE -- ********************************************************************** enterpriseApSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each radio in terms of security settings." ::= { enterpriseApSecurity 1 } enterpriseApSecurityEntry OBJECT-TYPE SYNTAX EnterpriseApSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one radio of the AP." INDEX { enterpriseApSecurityIndex } ::= { enterpriseApSecurityTable 1 } EnterpriseApSecurityEntry ::= SEQUENCE { enterpriseApSecurityIndex Integer32, enterpriseApSecurityAuthType INTEGER, enterpriseApSecuritySharedKeyLen INTEGER, enterpriseApSecurityWPAMode INTEGER, enterpriseApSecurityWPAKeyType INTEGER, enterpriseApSecurityWPACipher INTEGER, enterpriseApSecurityWPAPSKType INTEGER, enterpriseApSecurityWPAPSK DisplayString, enterpriseApSecurityWEPKeyType INTEGER, enterpriseApSecurityWEPEnabled TruthValue } enterpriseApSecurityIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio Index for security settings." ::= { enterpriseApSecurityEntry 1 } enterpriseApSecurityAuthType OBJECT-TYPE SYNTAX INTEGER { open(0), shared(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the type of authentication in use for this radio interface." ::= { enterpriseApSecurityEntry 2 } enterpriseApSecuritySharedKeyLen OBJECT-TYPE SYNTAX INTEGER { none(0), sixtyFour(1), oneHundredTwentyEight(2), oneHundredFiftyTwo(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the shared key length for this radio interface." ::= { enterpriseApSecurityEntry 3 } enterpriseApSecurityWPAMode OBJECT-TYPE SYNTAX INTEGER { supported(0), required(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the state of WPA for this radio interface. Supported(0) means either WEP or WPA clients are allowed, required (1) means only WPA clients are allowed and disabled(2) means only WEP clients are allowed." ::= { enterpriseApSecurityEntry 4 } enterpriseApSecurityWPAKeyType OBJECT-TYPE SYNTAX INTEGER { dot1x(0), presharedkey(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the type of WPA Key Management in use for this radio interface." ::= { enterpriseApSecurityEntry 5 } enterpriseApSecurityWPACipher OBJECT-TYPE SYNTAX INTEGER { wep(0), tkip(1), aes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the type of WPA Cipher in use for this radio interface." ::= { enterpriseApSecurityEntry 6 } enterpriseApSecurityWPAPSKType OBJECT-TYPE SYNTAX INTEGER { hex(0), alphanumeric(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the type of WPA Pre Shared Key in use for this radio interface." ::= { enterpriseApSecurityEntry 7 } enterpriseApSecurityWPAPSK OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates WPA Pre Shared Key in use for this radio interface." ::= { enterpriseApSecurityEntry 8 } enterpriseApSecurityWEPKeyType OBJECT-TYPE SYNTAX INTEGER { hexadecimal(0), alphanumeric(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the type of WEP Key in use for this radio interface." ::= { enterpriseApSecurityEntry 9 } enterpriseApSecurityWEPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether WEP is enabled." ::= { enterpriseApSecurityEntry 10 } enterpriseApSsh OBJECT IDENTIFIER ::= { enterpriseApSecurity 2 } enterpriseApSshServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether SSH server is enabled." ::= { enterpriseApSsh 1 } enterpriseApSshServerPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates SSH server's port number." DEFVAL { 22 } ::= { enterpriseApSsh 2 } enterpriseApSshTelnetServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether telnet server is enabled." ::= { enterpriseApSsh 3 } -- ********************************************************************** -- * EnterpriseApRadio TABLE -- ********************************************************************** enterpriseApRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each radio." ::= { enterpriseApRadio 1 } enterpriseApRadioEntry OBJECT-TYPE SYNTAX EnterpriseApRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one radio of the AP." INDEX { enterpriseApRadioIndex } ::= { enterpriseApRadioTable 1 } EnterpriseApRadioEntry ::= SEQUENCE { enterpriseApRadioIndex Integer32, enterpriseApRadioState INTEGER, enterpriseApRadioAutoChannel INTEGER, enterpriseApRadioTransmitPower INTEGER, enterpriseApRadioClosedSystem INTEGER, enterpriseApRadioMaxAssoc INTEGER, enterpriseApRadioTransmitKey INTEGER, enterpriseApRadioTurboMode INTEGER, enterpriseApRadioDescription DisplayString, enterpriseApRadioDataRate INTEGER, enterpriseApRadioGMode INTEGER, enterpriseApRadioAntennaMode INTEGER, enterpriseApRadioAntennaType INTEGER, enterpriseApRadioAntennaDiversity INTEGER, enterpriseApRadioAntennaLocation INTEGER } enterpriseApRadioIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio Index for configuration." ::= { enterpriseApRadioEntry 1 } enterpriseApRadioState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the state of the radio interface." ::= { enterpriseApRadioEntry 2 } enterpriseApRadioAutoChannel OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether auto channel selection is enabled or not for this radio interface" ::= { enterpriseApRadioEntry 3 } enterpriseApRadioTransmitPower OBJECT-TYPE SYNTAX INTEGER { min(0), eighth(1), quarter(2), half(3), full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the transmit power for this radio interface." ::= { enterpriseApRadioEntry 4 } enterpriseApRadioClosedSystem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether closed system is enabled for this radio interface." ::= { enterpriseApRadioEntry 5 } enterpriseApRadioMaxAssoc OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the max number of clients allowed on this radio interface." ::= { enterpriseApRadioEntry 6 } enterpriseApRadioTransmitKey OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates default transmit key in use for this radio interface." ::= { enterpriseApRadioEntry 7 } enterpriseApRadioTurboMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether turbo mode is enabled for this radio interface." ::= { enterpriseApRadioEntry 8 } enterpriseApRadioDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the description for this radio interface." ::= { enterpriseApRadioEntry 9} enterpriseApRadioDataRate OBJECT-TYPE SYNTAX INTEGER { oneMbps(1), twoMbps(2), fiveAndHalfMbps(5), sixMbps(6), nineMbps(9), elevenMbps(11), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fourtyEightMbps(48), fiftyFourMbps(54), auto(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed data rates. The auto setting will attempt to set the best data rate for the interface" ::= { enterpriseApRadioEntry 10 } enterpriseApRadioGMode OBJECT-TYPE SYNTAX INTEGER { bOnly(1), gOnly(2), bg(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface." ::= { enterpriseApRadioEntry 11 } enterpriseApRadioAntennaMode OBJECT-TYPE SYNTAX INTEGER { unknown(0), fixed(1), external(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: fixed(1) means use both built-in antennas, external(2) means use one external antenna on the right side. This setting is only valid for the 802.11g interface." ::= { enterpriseApRadioEntry 12 } enterpriseApRadioAntennaType OBJECT-TYPE SYNTAX INTEGER { integrated(0), foundryExternal3dbi(256), foundryExternal9dbi(257) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the type of antenna that can be attached." ::= { enterpriseApRadioEntry 13 } enterpriseApRadioAntennaDiversity OBJECT-TYPE SYNTAX INTEGER { unknown(0), full(1), fixedA(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the antenna will transmit from both sides (full) or the right side-same side as LED (fixedA)." ::= { enterpriseApRadioEntry 14 } enterpriseApRadioAntennaLocation OBJECT-TYPE SYNTAX INTEGER { indoor(1), outdoor(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates where the antenna will be located and affects which channels are available." ::= { enterpriseApRadioEntry 15 } -- ********************************************************************** -- * EnterpriseApRadio TABLE -- ********************************************************************** -- **************************************************************************************** -- enterpriseApSNMP - SNMP MIB -- **************************************************************************************** enterpriseApSNMPCommunityReadOnly OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP Read Only Community. The value if read, will only show ******." ::= { enterpriseApSNMP 1 } enterpriseApSNMPCommunityReadWrite OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP Read Write Community. The value if read, will only show *****." ::= { enterpriseApSNMP 2 } enterpriseApSNMPTrapDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApSNMPTrapDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each trap receiving server." ::= { enterpriseApSNMP 3 } enterpriseApSNMPTrapDestinationEntry OBJECT-TYPE SYNTAX EnterpriseApSNMPTrapDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one trap receiving server." INDEX { enterpriseApSNMPTrapDestinationIndex } ::= { enterpriseApSNMPTrapDestinationTable 1 } EnterpriseApSNMPTrapDestinationEntry ::= SEQUENCE { enterpriseApSNMPTrapDestinationIndex INTEGER, enterpriseApSNMPTrapDestinationCommunity DisplayString, enterpriseApSNMPTrapDestinationIP IpAddress, enterpriseApSNMPTrapDestinationState INTEGER } enterpriseApSNMPTrapDestinationIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Trap Destination Table." ::= { enterpriseApSNMPTrapDestinationEntry 1 } enterpriseApSNMPTrapDestinationCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP Trap Community" ::= { enterpriseApSNMPTrapDestinationEntry 2 } enterpriseApSNMPTrapDestinationIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the trap receiving server." ::= { enterpriseApSNMPTrapDestinationEntry 3 } enterpriseApSNMPTrapDestinationState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the trap receiving server is enabled." ::= { enterpriseApSNMPTrapDestinationEntry 4 } enterpriseApSNMPTrapFilters OBJECT IDENTIFIER ::= { enterpriseApSNMP 4 } sysSystemUpTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the sysSystemUp trap is enabled." ::= { enterpriseApSNMPTrapFilters 1 } sysSystemDownTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the sysSystemDowntrap is enabled." ::= { enterpriseApSNMPTrapFilters 2 } sysRadiusServerChangedTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the sysRadiusServerChanged trap is enabled." ::= { enterpriseApSNMPTrapFilters 3 } sysConfigFileVersionChangedTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the sysConfigFileVersionChanged trap is enabled." ::= { enterpriseApSNMPTrapFilters 4 } dot11StationAssociationTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot11StationAssociation trap is enabled." ::= { enterpriseApSNMPTrapFilters 5 } dot11StationReAssociationTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot11StationReAssociation trap is enabled." ::= { enterpriseApSNMPTrapFilters 6 } dot11StationAuthenticationTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot11StationAuthentication trap is enabled." ::= { enterpriseApSNMPTrapFilters 7 } dot11StationRequestFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot11StationRequestFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 8 } dot11InterfaceBFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot11InterfaceBFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 9 } dot11InterfaceAGFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot11InterfaceAGFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 10 } dot1xMacAddrAuthSuccessTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot1xMacAddrAuthSuccess trap is enabled." ::= { enterpriseApSNMPTrapFilters 11 } dot1xMacAddrAuthFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot1xMacAddrAuthFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 12 } dot1xAuthNotInitiatedTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot1xAuthNotInitiated trap is enabled." ::= { enterpriseApSNMPTrapFilters 13 } dot1xAuthSuccessTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot1xAuthSuccess trap is enabled." ::= { enterpriseApSNMPTrapFilters 14 } dot1xAuthFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot1xAuthFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 15 } localMacAddrAuthSuccessTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the localMacAddrAuthSuccess trap is enabled." ::= { enterpriseApSNMPTrapFilters 16 } localMacAddrAuthFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the localMacAddrAuthFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 17 } pppLogonFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the pppLogonFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 18 } iappStationRoamedFromTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the iappStationRoamedFrom trap is enabled." ::= { enterpriseApSNMPTrapFilters 19 } iappStationRoamedToTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the iappStationRoamedTo trap is enabled." ::= { enterpriseApSNMPTrapFilters 20 } iappContextDataSentTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the iappContextDataSent trap is enabled." ::= { enterpriseApSNMPTrapFilters 21 } sntpServerFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the sntpServerFail trap is enabled." ::= { enterpriseApSNMPTrapFilters 22 } dot1xSuppAuthenticatedTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the dot1xSupplicantAuthenticated trap is enabled." ::= { enterpriseApSNMPTrapFilters 23 } wirelessExternalAntennaTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the wirelessExternalAntenna trap is enabled." ::= { enterpriseApSNMPTrapFilters 24 } micFailTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the MIC failure trap is enabled." ::= { enterpriseApSNMPTrapFilters 25 } seqErrTrapEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the sequence error trap is enabled." ::= { enterpriseApSNMPTrapFilters 26 } -- *************************************************************** -- EAP Wireless Session Table -- *************************************************************** enterpriseApSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table list all sessions (wireless stations) status" ::= { enterpriseApSession 1 } enterpriseApSessionEntry OBJECT-TYPE SYNTAX EnterpriseApSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about status and statistics of the wireless station." INDEX { enterpriseApSessionIfIndex, enterpriseApSessionStationAddres } ::= { enterpriseApSessionTable 1 } EnterpriseApSessionEntry ::= SEQUENCE { enterpriseApSessionIfIndex Integer32, enterpriseApSessionStationAddres MacAddress, enterpriseApSessionAuthenticated TruthValue, enterpriseApSessionAssociated TruthValue, enterpriseApSessionIsForwarding TruthValue, enterpriseApSessionKeyType INTEGER, enterpriseApSessionAssociationId Integer32, enterpriseApSessionLastAuthenticatedTime TimeTicks, enterpriseApSessionAssociatedTime TimeTicks, enterpriseApSessionLastAssociatedTime TimeTicks, enterpriseApSessionLastDisassociatedTime TimeTicks, enterpriseApSessionTxPacketCount Counter32, enterpriseApSessionRxPacketCount Counter32, enterpriseApSessionTxByteCount Counter32, enterpriseApSessionRxByteCount Counter32 } enterpriseApSessionIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for the radio this session is associated with." ::= { enterpriseApSessionEntry 1 } enterpriseApSessionStationAddres OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique MAC Address of the station for this session." ::= { enterpriseApSessionEntry 2 } enterpriseApSessionAuthenticated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the session is authenticated or not." ::= { enterpriseApSessionEntry 3 } enterpriseApSessionAssociated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the session is associated or not. It is rare case that not associated stations show up in the table." ::= { enterpriseApSessionEntry 4 } enterpriseApSessionIsForwarding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the AP is forwarding the client station traffic (higher level authentication)" ::= { enterpriseApSessionEntry 5 } enterpriseApSessionKeyType OBJECT-TYPE SYNTAX INTEGER { none(1), staticWep(2), dynamicWep(3), wpaWep(4), wpaTkip(5), wpaAes(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption key type used by the station. Note that wpa-wep is not supported" ::= { enterpriseApSessionEntry 6 } enterpriseApSessionAssociationId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal association identify number" ::= { enterpriseApSessionEntry 7 } enterpriseApSessionLastAuthenticatedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup" ::= { enterpriseApSessionEntry 8 } enterpriseApSessionAssociatedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time in hundredths of a second since the client associated. The value is related to the system startup" ::= { enterpriseApSessionEntry 9 } enterpriseApSessionLastAssociatedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup" ::= { enterpriseApSessionEntry 10 } enterpriseApSessionLastDisassociatedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup" ::= { enterpriseApSessionEntry 11 } enterpriseApSessionTxPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of packets transmitted" ::= { enterpriseApSessionEntry 12 } enterpriseApSessionRxPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of packets received" ::= { enterpriseApSessionEntry 13 } enterpriseApSessionTxByteCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of bytes transmitted" ::= { enterpriseApSessionEntry 14 } enterpriseApSessionRxByteCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of bytes received" ::= { enterpriseApSessionEntry 15 } -- **************************************************************************************** -- enterpriseApIapp - IAPP Mib elements -- **************************************************************************************** enterpriseApIappEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether IAPP is enabled." ::= { enterpriseApIapp 1 } -- *************************************************************** -- Event Log Table -- *************************************************************** enterpriseApEvLogTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApEvLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a snapshot of the current event log." ::= { enterpriseApEventLog 1 } enterpriseApEvLogEntry OBJECT-TYPE SYNTAX EnterpriseApEvLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing one message from the event log." INDEX { evLogIndex } ::= { enterpriseApEvLogTable 1 } EnterpriseApEvLogEntry ::= SEQUENCE { evLogIndex INTEGER, evLogMessage DisplayString } evLogIndex OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Event Log Message" ::= { enterpriseApEvLogEntry 1 } evLogMessage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Event Log Message" ::= { enterpriseApEvLogEntry 2 } enterpriseApEvLogClear OBJECT-TYPE SYNTAX INTEGER { clearLog(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is set to 1 to clear the event log. When read, the value will have no meaning." ::= { enterpriseApEventLog 2 } -- ********************************************************************** -- * EnterpriseApVapRadio TABLE -- ********************************************************************** enterpriseApVapRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF EnterpriseApVapRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of descriptive and status information about configuration of each Vap radio." ::= { enterpriseApVapRadio 1 } enterpriseApVapRadioEntry OBJECT-TYPE SYNTAX EnterpriseApVapRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about configuration of one Vap radio of the AP." INDEX { enterpriseApVapRadioIndex } ::= { enterpriseApVapRadioTable 1 } EnterpriseApVapRadioEntry ::= SEQUENCE { enterpriseApVapRadioIndex Integer32, enterpriseApVapRadioState INTEGER, enterpriseApVapRadioClosedSystem INTEGER, enterpriseApVapRadioMaxAssoc INTEGER, enterpriseApVapRadioTransmitKey INTEGER, enterpriseApVapRadioDescription DisplayString, enterpriseApVapRadioAdminState INTEGER } enterpriseApVapRadioIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio Index for configuration." ::= { enterpriseApVapRadioEntry 1 } enterpriseApVapRadioState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the operational state of the radio interface." ::= { enterpriseApVapRadioEntry 2 } enterpriseApVapRadioClosedSystem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether closed system is enabled for this radio interface." ::= { enterpriseApVapRadioEntry 3 } enterpriseApVapRadioMaxAssoc OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the max number of clients allowed on this radio interface." ::= { enterpriseApVapRadioEntry 4 } enterpriseApVapRadioTransmitKey OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates default transmit key in use for this radio interface." ::= { enterpriseApVapRadioEntry 5 } enterpriseApVapRadioDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the description for this radio interface." ::= { enterpriseApVapRadioEntry 6 } enterpriseApVapRadioAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the state of the radio interface admin state." ::= { enterpriseApVapRadioEntry 7 } -- ********************************************************************** -- * End of EnterpriseApVapRadio TABLE -- ********************************************************************** END