ADTRAN-TSUOCNx530-MIB DEFINITIONS ::= BEGIN -- TITLE: Adtran Nx 530 -- FILENAME: nx530.MIB -- PARTNUMBER: 1200.054L1 -- AUTHOR: Ross Lintelman -- DATE: 97/05/XX -- This MIB defines the Plug In Nx 530 module IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ifIndex FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 dsx1LineStatus FROM RFC1406-MIB adProdPhysAddress FROM ADTRAN-MIB; -- OBJECT IDENTIFIERS adtran OBJECT IDENTIFIER ::= { enterprises 664 } adProducts OBJECT IDENTIFIER ::= { adtran 1 } adMgmt OBJECT IDENTIFIER ::= { adtran 2 } ------------------------------------------------------------------------------ -- nx 530 ------------------------------------------------------------------------------ adTSUOCMg OBJECT IDENTIFIER ::= { adMgmt 1000 } adNx530Config OBJECT IDENTIFIER ::= { adTSUOCMg 3 } adNx530CDBConfig OBJECT IDENTIFIER ::= { adNx530Config 1 } adNx530TWConfig OBJECT IDENTIFIER ::= { adNx530Config 2 } adTSU530 OBJECT IDENTIFIER ::= { adProducts 72 } adTSU530traps OBJECT IDENTIFIER ::= { adMgmt 72 } adTSU530config OBJECT IDENTIFIER ::= { adTSU530traps 1 } -- this table is used to monitor status of nx's adNx530MonitorStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530MonitorStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Monitor status for all Plug In NX's" ::= {adNx530TWConfig 54} adNx530MonitorStatusEntry OBJECT-TYPE SYNTAX ADNx530MonitorStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An Entry in the Monitor Status Table" INDEX { adTWmsIndex } ::= {adNx530MonitorStatusTable 1} ADNx530MonitorStatusEntry ::= SEQUENCE { adTWmsIndex INTEGER, adNx530MonitorStatus OCTET STRING } adTWmsIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530MonitorStatusEntry 1 } adNx530MonitorStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Base Nx56/64 Monitor Status State: RTS CTS DCD DSR" ::= { adNx530MonitorStatusEntry 16388 } -- end of monitor status table -- this table is used to monitor the data leads adNx530MonitorDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530MonitorDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Monitor Data for all Plug In NX's" ::= {adNx530TWConfig 53} adNx530MonitorDataEntry OBJECT-TYPE SYNTAX ADNx530MonitorDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An Entry in the Monitor Data Table" INDEX { adTWmdIndex } ::= {adNx530MonitorDataTable 1} ADNx530MonitorDataEntry ::= SEQUENCE { adTWmdIndex INTEGER, adNx530MonitorData OCTET STRING } adTWmdIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530MonitorDataEntry 1 } adNx530MonitorData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Base Nx56/64 Monitor Data State: TXD RXD ETC LCK " ::= { adNx530MonitorDataEntry 16388 } --end of monitor data table -- this table is used for nx loopback status adNx530LoopBackStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530LoopBackStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Loop back info for all plug-in nx's" ::= {adNx530TWConfig 5} adNx530LoopBackStatusEntry OBJECT-TYPE SYNTAX ADNx530LoopBackStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An Entry in the loop back Table" INDEX { adTWlbsIndex } ::= {adNx530LoopBackStatusTable 1} ADNx530LoopBackStatusEntry ::= SEQUENCE { adTWlbsIndex INTEGER, adNx530LoopBackStatus INTEGER } adTWlbsIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530LoopBackStatusEntry 1 } adNx530LoopBackStatus OBJECT-TYPE SYNTAX INTEGER { noLoop (0), loopedByRemote (1), remoteUnitLooped (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Base Nx56/64 Loopback Status" ::= { adNx530LoopBackStatusEntry 514 } --end of loopback table -- this table is used to monitor port rate of the nx's adNx530PortRateTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530PortRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Port Rate for all Plug In NX's" ::= {adNx530TWConfig 51} adNx530PortRateEntry OBJECT-TYPE SYNTAX ADNx530PortRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An Entry in the Port Rate Table" INDEX { adTWprIndex } ::= {adNx530PortRateTable 1} ADNx530PortRateEntry ::= SEQUENCE { adTWprIndex INTEGER, adNx530PortRate INTEGER } adTWprIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530PortRateEntry 1 } adNx530PortRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Base Nx56/64 Port Rate" ::= { adNx530PortRateEntry 1024 } -- end of port rate table -- a set to clear the 511 test pattern counter adNx530Clear511counterTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530Clear511counterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Set to clear 511 errors" ::= {adNx530TWConfig 16440} adNx530Clear511counterEntry OBJECT-TYPE SYNTAX ADNx530Clear511counterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set clears the 511 error counter" INDEX { adTWccIndex } ::= {adNx530Clear511counterTable 1} ADNx530Clear511counterEntry ::= SEQUENCE { adTWccIndex INTEGER, adNx530Clear511counter INTEGER } adTWccIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530Clear511counterEntry 1 } adNx530Clear511counter OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A set clears the 511 error counter" ::= { adNx530Clear511counterEntry 512 } -- end of table -- a set to inject a 511 pattern error adNx530Inj511errorTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530Inj511errorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "511 error inject" ::= {adNx530TWConfig 16442} adNx530Inj511errorEntry OBJECT-TYPE SYNTAX ADNx530Inj511errorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set injects a 511 error" INDEX { adTWieIndex } ::= {adNx530Inj511errorTable 1} ADNx530Inj511errorEntry ::= SEQUENCE { adTWieIndex INTEGER, adNx530Inj511error INTEGER } adTWieIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530Inj511errorEntry 1 } adNx530Inj511error OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A set injects a 511 error" ::= { adNx530Inj511errorEntry 512 } -- end of monitor status table -- 511 test pattern results table adNx530511resultsTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530511resultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "511 test pattern results" ::= {adNx530TWConfig 8} adNx530511resultsEntry OBJECT-TYPE SYNTAX ADNx530511resultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "511 test pattern results" INDEX { adTWresIndex } ::= {adNx530511resultsTable 1} ADNx530511resultsEntry ::= SEQUENCE { adTWresIndex INTEGER, adNx530511resultsSync INTEGER, adNx530511resultsES INTEGER } adTWresIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530511resultsEntry 1 } adNx530511resultsSync OBJECT-TYPE SYNTAX INTEGER { sync (1), nosync (0) } ACCESS read-only STATUS mandatory DESCRIPTION "511 test pattern sync" ::= { adNx530511resultsEntry 514 } adNx530511resultsES OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "511 test pattern errors" ::= { adNx530511resultsEntry 1027 } -- end of table -- CDB Items table based on ifindex adNx530CDBTable OBJECT-TYPE SYNTAX SEQUENCE OF ADNx530CDBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Nx Slot table" ::= { adNx530CDBConfig 1 } adNx530CDBEntry OBJECT-TYPE SYNTAX ADNx530CDBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Nx table." INDEX { adCDBifIndex } ::= { adNx530CDBTable 1 } ADNx530CDBEntry ::= SEQUENCE { adCDBifIndex INTEGER, adNx530Interface INTEGER, adNx530TxClock INTEGER, adNx530DTEData INTEGER, adNx530CTS INTEGER, adNx530DataRatePer INTEGER, adNx530LoopBack INTEGER, adNx530DCD INTEGER, adNx530511 INTEGER, adNx530ZeroInhibit INTEGER, adNx530DSR INTEGER } adCDBifIndex OBJECT-TYPE SYNTAX INTEGER (2..26) ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the object instance." ::= { adNx530CDBEntry 1 } adNx530Interface OBJECT-TYPE SYNTAX INTEGER { eia-530 (2), v35 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Physical connection used for NX56/64" ::= { adNx530CDBEntry 2 } adNx530TxClock OBJECT-TYPE SYNTAX INTEGER { internal (4), internal-invert (5), external (6) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit Clock Source" ::= { adNx530CDBEntry 3 } adNx530DTEData OBJECT-TYPE SYNTAX INTEGER { normal (7), invert (8) } ACCESS read-write STATUS mandatory DESCRIPTION "DTE Data format" ::= { adNx530CDBEntry 4 } adNx530CTS OBJECT-TYPE SYNTAX INTEGER { forced-on (9), normal (10) } ACCESS read-write STATUS mandatory DESCRIPTION "CTS Mode" ::= { adNx530CDBEntry 5 } adNx530DataRatePer OBJECT-TYPE SYNTAX INTEGER { rate56k (11), rate64k (12) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Rate Per DS0" ::= { adNx530CDBEntry 6 } adNx530LoopBack OBJECT-TYPE SYNTAX INTEGER { off (13), net-local (14), remote (15) } ACCESS read-write STATUS mandatory DESCRIPTION "LoopBack Mode" ::= { adNx530CDBEntry 7 } adNx530DCD OBJECT-TYPE SYNTAX INTEGER { forced-on (16), normal (17) } ACCESS read-write STATUS mandatory DESCRIPTION "DCD Mode" ::= { adNx530CDBEntry 8 } adNx530511 OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "511 Pattern Mode" ::= { adNx530CDBEntry 11 } adNx530ZeroInhibit OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Zero Inhibit Mode" ::= { adNx530CDBEntry 12 } adNx530DSR OBJECT-TYPE SYNTAX INTEGER { forced-on (16), normal (17) } ACCESS read-write STATUS mandatory DESCRIPTION "DSR Mode" ::= { adNx530CDBEntry 15 } -------------------------------------------- -- TSU-XX0 530 Enterprise Specific Traps -------------------------------------------- adTSU530ClockSlip TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is in a clock-slip alarm condition" -- #TYPE "Alarm - 530 Clock Slip" -- #SUMMARY "530 8101: Clock-slip alarm condition. " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7201 adTSU530PllAlarm TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is in a PLL alarm condition" -- #TYPE "Alarm - 530 PLL Alarm" -- #SUMMARY "530 8102: PLL alarm condition. " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7202 adTSU530ZeroAlarm TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "An excessive number of consecutive zeros have been detected from the DTE. " -- #TYPE "Alarm - 530 Zero Alarm" -- #SUMMARY "530 7203: Zero alarm condition. " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY WARNING -- #GENERIC 6 -- #CATEGORY "Threshold Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7203 adTSU530FIFOALRM TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 is in FIFO Alarm condition. " -- #TYPE "Alarm - 530 FIFO Alarm" -- #SUMMARY "530 7204: FIFO Alarm " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7204 adTSU530EXTClockAlarm TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is not receiving a valid clock signal from the DTE. " -- #TYPE "Alarm - 530 External Clock Alarm" -- #SUMMARY "530 7205: External Clock Alarm " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7205 adTSU530Lost TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card has been removed from the chassis or that the card has failed. " -- #TYPE "Alarm - 530 Card Not Responding " -- #SUMMARY "530 7215: 530 card is not responding " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7215 adTSU530ClockSlipClear TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is no longer in a clock-slip alarm condition" -- #TYPE "Alarm - 530 Clock Slip Clear" -- #SUMMARY "530 7217: Clock-slip alarm cleared. " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7217 adTSU530PllALRMCLR TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is no longer in a PLL alarm condition" -- #TYPE "Alarm - 530 PLL Alarm Clear" -- #SUMMARY "530 7218: PLL alarm cleared. " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7218 adTSU530ZeroALRMCLR TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is no longer in a Zero Alarm condition" -- #TYPE "Alarm - 530 Zero Alarm Clear" -- #SUMMARY "530 7219: Zero alarm cleared. " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY WARNING -- #GENERIC 6 -- #CATEGORY "Threshold Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7219 adTSU530FIFOALRMCLR TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 has cleared FIFO Alarm condition. " -- #TYPE "Alarm - 530 FIFO Alarm Clear" -- #SUMMARY "530 7220: FIFO Alarm Clear " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7220 adTSU530EXTCLKALRMCLR TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 card is now receiving a valid clock signal from the DTE. " -- #TYPE "Alarm - 530 External Clock Alarm Clear" -- #SUMMARY "530 7221: External Clock Alarm cleared " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7221 adTSU530Found TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that an 530 card has been found in the TSU-XX0. " -- #TYPE "Alarm - 530 Card Found " -- #SUMMARY "530 7231: 530 card has been found " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY MAJOR -- #GENERIC 6 -- #CATEGORY "Error Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7231 adTSU530Loopup TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 has been looped-up (bilateral loopback) from a local source. " -- #TYPE "Status - 530 Loop-up" -- #SUMMARY "530 7233: Looped-up " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY INFORMATIONAL -- #GENERIC 6 -- #CATEGORY "Status Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7233 adTSU530RemoteLoopup TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 interface has been looped-up (bilateral loopback) from a remote source. " -- #TYPE "Status - 530 Remote Loop-up" -- #SUMMARY "530 7234: Remotely looped-up " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY INFORMATIONAL -- #GENERIC 6 -- #CATEGORY "Status Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7234 adTSU530511On TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 is sending 511 pattern towards the network. " -- #TYPE "Status - MxDBU 511 Pattern On" -- #SUMMARY "530 7235: 530 511 pattern on " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY INFORMATIONAL -- #GENERIC 6 -- #CATEGORY "Status Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7235 adTSU530Loopdown TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 has been looped-down (bilateral loopback) from a local source. " -- #TYPE "Status - 530 Loop-down " -- #SUMMARY "530 7249: Looped-down " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY INFORMATIONAL -- #GENERIC 6 -- #CATEGORY "Status Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7249 adTSU530Remotedown TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 has been looped-down (bilateral loopback) from a remote source. " -- #TYPE "Status - 530 Remote Loop-down " -- #SUMMARY "530 7250: Remote looped-down " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY INFORMATIONAL -- #GENERIC 6 -- #CATEGORY "Status Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7250 adTSU530511Off TRAP-TYPE ENTERPRISE adTSU530 VARIABLES { ifIndex, adProdPhysAddress, dsx1LineStatus } DESCRIPTION "Indicates that the 530 is no longer sending 511 pattern towards the network. " -- #TYPE "Status - MxDBU 511 Pattern Off" -- #SUMMARY "530 7251: 530 511 pattern off " -- #SUMMARY "Unit Name: $C, Interface: %d, Unit Id: %x" -- #ARGUMENTS {0,1} -- #SEVERITY INFORMATIONAL -- #GENERIC 6 -- #CATEGORY "Status Events" -- #SOURCE_ID "A" -- #TIMEINDEX 0 ::= 7251 END