-- *********************************************************************
-- CISCO-UNIFIED-COMPUTING-PROC-MIB.my
-- 
-- MIB representation of the Cisco Unified Computing System
-- PROC management information model package
-- 
-- Created September 2011 by Charles Bullis
-- 
-- Copyright (c) 2005-2011 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-UNIFIED-COMPUTING-PROC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoUnifiedComputingMIBObjects,
    CucsManagedObjectId,
    CucsManagedObjectDn
        FROM CISCO-UNIFIED-COMPUTING-MIB;

cucsProcObjects MODULE-IDENTITY
    LAST-UPDATED    "201109150000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553 -NETS
        
        E-mail: cs-san@cisco.com, cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Unified Computing System
        PROC management information model package"
    ::= { ciscoUnifiedComputingMIBObjects 40 }

cucsProcDoerTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcDoerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:Doer managed object table"
    ::= { cucsProcObjects 1 }

cucsProcDoerEntry OBJECT-TYPE
    SYNTAX           CucsProcDoerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcDoerTable table."
    INDEX { cucsProcDoerInstanceId }
    ::= { cucsProcDoerTable 1 }

CucsProcDoerEntry ::= SEQUENCE {
    cucsProcDoerInstanceId                                           CucsManagedObjectId,
    cucsProcDoerDn                                                   CucsManagedObjectDn,
    cucsProcDoerRn                                                   SnmpAdminString,
    cucsProcDoerId                                                   Gauge32,
    cucsProcDoerName                                                 SnmpAdminString
}

cucsProcDoerInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcDoerEntry 1 }

cucsProcDoerDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Doer:dn managed object property"
    ::= { cucsProcDoerEntry 2 }

cucsProcDoerRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Doer:rn managed object property"
    ::= { cucsProcDoerEntry 3 }

cucsProcDoerId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Doer:id managed object property"
    ::= { cucsProcDoerEntry 4 }

cucsProcDoerName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Doer:name managed object property"
    ::= { cucsProcDoerEntry 5 }

cucsProcManagerTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcManagerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:Manager managed object table"
    ::= { cucsProcObjects 2 }

cucsProcManagerEntry OBJECT-TYPE
    SYNTAX           CucsProcManagerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcManagerTable table."
    INDEX { cucsProcManagerInstanceId }
    ::= { cucsProcManagerTable 1 }

CucsProcManagerEntry ::= SEQUENCE {
    cucsProcManagerInstanceId                                        CucsManagedObjectId,
    cucsProcManagerDn                                                CucsManagedObjectDn,
    cucsProcManagerRn                                                SnmpAdminString
}

cucsProcManagerInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcManagerEntry 1 }

cucsProcManagerDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Manager:dn managed object property"
    ::= { cucsProcManagerEntry 2 }

cucsProcManagerRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Manager:rn managed object property"
    ::= { cucsProcManagerEntry 3 }

cucsProcPrtTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcPrtEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:Prt managed object table"
    ::= { cucsProcObjects 3 }

cucsProcPrtEntry OBJECT-TYPE
    SYNTAX           CucsProcPrtEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcPrtTable table."
    INDEX { cucsProcPrtInstanceId }
    ::= { cucsProcPrtTable 1 }

CucsProcPrtEntry ::= SEQUENCE {
    cucsProcPrtInstanceId                                            CucsManagedObjectId,
    cucsProcPrtDn                                                    CucsManagedObjectDn,
    cucsProcPrtRn                                                    SnmpAdminString,
    cucsProcPrtId                                                    Gauge32,
    cucsProcPrtName                                                  SnmpAdminString
}

cucsProcPrtInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcPrtEntry 1 }

cucsProcPrtDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Prt:dn managed object property"
    ::= { cucsProcPrtEntry 2 }

cucsProcPrtRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Prt:rn managed object property"
    ::= { cucsProcPrtEntry 3 }

cucsProcPrtId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Prt:id managed object property"
    ::= { cucsProcPrtEntry 4 }

cucsProcPrtName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Prt:name managed object property"
    ::= { cucsProcPrtEntry 5 }

cucsProcPrtCountsTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcPrtCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:PrtCounts managed object table"
    ::= { cucsProcObjects 4 }

cucsProcPrtCountsEntry OBJECT-TYPE
    SYNTAX           CucsProcPrtCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcPrtCountsTable table."
    INDEX { cucsProcPrtCountsInstanceId }
    ::= { cucsProcPrtCountsTable 1 }

CucsProcPrtCountsEntry ::= SEQUENCE {
    cucsProcPrtCountsInstanceId                                      CucsManagedObjectId,
    cucsProcPrtCountsDn                                              CucsManagedObjectDn,
    cucsProcPrtCountsRn                                              SnmpAdminString,
    cucsProcPrtCountsDbtxs                                           Gauge32,
    cucsProcPrtCountsTotal                                           Gauge32
}

cucsProcPrtCountsInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcPrtCountsEntry 1 }

cucsProcPrtCountsDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:PrtCounts:dn managed object property"
    ::= { cucsProcPrtCountsEntry 2 }

cucsProcPrtCountsRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:PrtCounts:rn managed object property"
    ::= { cucsProcPrtCountsEntry 3 }

cucsProcPrtCountsDbtxs OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:PrtCounts:dbtxs managed object property"
    ::= { cucsProcPrtCountsEntry 4 }

cucsProcPrtCountsTotal OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:PrtCounts:total managed object property"
    ::= { cucsProcPrtCountsEntry 5 }

cucsProcStimulusCountsTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcStimulusCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts managed object table"
    ::= { cucsProcObjects 5 }

cucsProcStimulusCountsEntry OBJECT-TYPE
    SYNTAX           CucsProcStimulusCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcStimulusCountsTable table."
    INDEX { cucsProcStimulusCountsInstanceId }
    ::= { cucsProcStimulusCountsTable 1 }

CucsProcStimulusCountsEntry ::= SEQUENCE {
    cucsProcStimulusCountsInstanceId                                 CucsManagedObjectId,
    cucsProcStimulusCountsDn                                         CucsManagedObjectDn,
    cucsProcStimulusCountsRn                                         SnmpAdminString,
    cucsProcStimulusCountsBulked                                     Gauge32,
    cucsProcStimulusCountsFailed                                     Gauge32,
    cucsProcStimulusCountsRetried                                    Gauge32,
    cucsProcStimulusCountsSingleton                                  Gauge32,
    cucsProcStimulusCountsSuccessfull                                Gauge32,
    cucsProcStimulusCountsTotal                                      Gauge32
}

cucsProcStimulusCountsInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcStimulusCountsEntry 1 }

cucsProcStimulusCountsDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:dn managed object property"
    ::= { cucsProcStimulusCountsEntry 2 }

cucsProcStimulusCountsRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:rn managed object property"
    ::= { cucsProcStimulusCountsEntry 3 }

cucsProcStimulusCountsBulked OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:bulked managed object property"
    ::= { cucsProcStimulusCountsEntry 4 }

cucsProcStimulusCountsFailed OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:failed managed object property"
    ::= { cucsProcStimulusCountsEntry 5 }

cucsProcStimulusCountsRetried OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:retried managed object property"
    ::= { cucsProcStimulusCountsEntry 6 }

cucsProcStimulusCountsSingleton OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:singleton managed object property"
    ::= { cucsProcStimulusCountsEntry 7 }

cucsProcStimulusCountsSuccessfull OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:successfull managed
        object property"
    ::= { cucsProcStimulusCountsEntry 8 }

cucsProcStimulusCountsTotal OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:StimulusCounts:total managed object property"
    ::= { cucsProcStimulusCountsEntry 9 }

cucsProcSvcTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcSvcEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:Svc managed object table"
    ::= { cucsProcObjects 7 }

cucsProcSvcEntry OBJECT-TYPE
    SYNTAX           CucsProcSvcEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcSvcTable table."
    INDEX { cucsProcSvcInstanceId }
    ::= { cucsProcSvcTable 1 }

CucsProcSvcEntry ::= SEQUENCE {
    cucsProcSvcInstanceId                                            CucsManagedObjectId,
    cucsProcSvcDn                                                    CucsManagedObjectDn,
    cucsProcSvcRn                                                    SnmpAdminString,
    cucsProcSvcId                                                    Gauge32,
    cucsProcSvcName                                                  SnmpAdminString
}

cucsProcSvcInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcSvcEntry 1 }

cucsProcSvcDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Svc:dn managed object property"
    ::= { cucsProcSvcEntry 2 }

cucsProcSvcRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Svc:rn managed object property"
    ::= { cucsProcSvcEntry 3 }

cucsProcSvcId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Svc:id managed object property"
    ::= { cucsProcSvcEntry 4 }

cucsProcSvcName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:Svc:name managed object property"
    ::= { cucsProcSvcEntry 5 }

cucsProcTxCountsTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsProcTxCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS proc:TxCounts managed object table"
    ::= { cucsProcObjects 6 }

cucsProcTxCountsEntry OBJECT-TYPE
    SYNTAX           CucsProcTxCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsProcTxCountsTable table."
    INDEX { cucsProcTxCountsInstanceId }
    ::= { cucsProcTxCountsTable 1 }

CucsProcTxCountsEntry ::= SEQUENCE {
    cucsProcTxCountsInstanceId                                       CucsManagedObjectId,
    cucsProcTxCountsDn                                               CucsManagedObjectDn,
    cucsProcTxCountsRn                                               SnmpAdminString,
    cucsProcTxCountsBulked                                           Gauge32,
    cucsProcTxCountsFailed                                           Gauge32,
    cucsProcTxCountsRetried                                          Gauge32,
    cucsProcTxCountsSingleton                                        Gauge32,
    cucsProcTxCountsSuccessfull                                      Gauge32,
    cucsProcTxCountsTotal                                            Gauge32
}

cucsProcTxCountsInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsProcTxCountsEntry 1 }

cucsProcTxCountsDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:dn managed object property"
    ::= { cucsProcTxCountsEntry 2 }

cucsProcTxCountsRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:rn managed object property"
    ::= { cucsProcTxCountsEntry 3 }

cucsProcTxCountsBulked OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:bulked managed object property"
    ::= { cucsProcTxCountsEntry 4 }

cucsProcTxCountsFailed OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:failed managed object property"
    ::= { cucsProcTxCountsEntry 5 }

cucsProcTxCountsRetried OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:retried managed object property"
    ::= { cucsProcTxCountsEntry 6 }

cucsProcTxCountsSingleton OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:singleton managed object property"
    ::= { cucsProcTxCountsEntry 7 }

cucsProcTxCountsSuccessfull OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:successfull managed object property"
    ::= { cucsProcTxCountsEntry 8 }

cucsProcTxCountsTotal OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS proc:TxCounts:total managed object property"
    ::= { cucsProcTxCountsEntry 9 }

END