-- **************************************************************************** -- COLUBRIS-802DOT11-MIB definitions -- -- Copyright (c) 2004, Colubris Networks, Inc. -- All Rights Reserved. -- -- Colubris Networks IEEE802.11 MIB file. -- -- **************************************************************************** COLUBRIS-802DOT11-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32, IpAddress, TimeTicks FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, MacAddress, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex, ifDescr, InterfaceIndex FROM IF-MIB coVirtualAccessPointConfigEntry, coVirtualApSSID FROM COLUBRIS-VIRTUAL-AP-MIB colubrisMgmtV2 FROM COLUBRIS-SMI ColubrisSSIDOrNone, ColubrisNotificationEnable, ColubrisDataRate, ColubrisRadioType FROM COLUBRIS-TC ; colubris802dot11 MODULE-IDENTITY LAST-UPDATED "200802210000Z" ORGANIZATION "Colubris Networks, Inc." CONTACT-INFO "Colubris Networks Postal: 200 West Street Ste 300 Waltham, Massachusetts 02451-1121 UNITED STATES Phone: +1 781 684 0001 Fax: +1 781 684 0009 E-mail: cn-snmp@colubris.com" DESCRIPTION "The MIB module for IEEE 802.11 entities." ::= { colubrisMgmtV2 4 } -- *** Major sections ********************************************************* -- Access Point Attributes -- DEFINED AS "The Access Access object class provides the necessary -- support at the station to manage the processes in the station -- such that the station may work cooperatively as a part of an -- IEEE 802.11 network."; coDot11ap OBJECT IDENTIFIER ::= { colubris802dot11 1 } -- coDot11ap GROUPS -- coDot11AccessPointConfigTable ::= { coDot11ap 1 } -- coDot11AuthenticationAlgorithmsTable ::= { coDot11ap 2 } -- coDot11WEPDefaultKeysTable ::= { coDot11ap 3 } -- coDot11PrivacyTable ::= { coDot11ap 4 } -- coDot11AssociationTable ::= { coDot11ap 5 } -- coDot11WDSPortTable ::= { coDot11ap 6 } -- coDot11ScanTable ::= { coDot11ap 7 } -- MAC Attributes -- DEFINED AS "The MAC object class provides the necessary support -- for the access control, generation, and verification of frame check -- sequences, and proper delivery of valid data to upper layers."; coDot11mac OBJECT IDENTIFIER ::= { colubris802dot11 2 } -- MAC GROUPS -- reference IEEE Std 802.1f-1993 -- coDot11OperationTable ::= { coDot11mac 1 } -- coDot11CountersTable ::= { coDot11mac 2 } -- PHY Attributes -- DEFINED AS "The PHY object class provides the necessary support -- for required PHY operational information that may vary from PHY -- to PHY and from STA to STA to be communicated to upper layers." coDot11phy OBJECT IDENTIFIER ::= { colubris802dot11 3 } -- phy GROUPS -- coDot11PhyOperationTable ::= { coDot11phy 1 } -- coDot11PhyAntennaTable ::= { coDot11phy 2 } -- coDot11PhyConfigTable ::= { coDot11phy 3 } -- coDot11PhyDSSSTable ::= { coDot11phy 4 } -- coDot11RegDomainsSupportedTable ::= { coDot11phy 5 } -- coDot11AntennasListTable ::= { coDot11phy 6 } -- coDot11SupportedDataRatesTxTable ::= { coDot11phy 7 } -- coDot11SupportedDataRatesRxTable ::= { coDot11phy 8 } -- coDot11PhyOFDMTable ::= { coDot11phy 9 } -- coDot11PhyHTTable ::= { coDot11phy 14 } -- *** Textual conventions from 802 definitions ******************************* WEPKeytype ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Textual conventions from 802 definitions." SYNTAX OCTET STRING (SIZE (0|5|13)) -- *** Access Point Config Table ********************************************** coDot11AccessPointConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11AccessPointConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WLAN profile configuration attributes. In tablular form to allow for multiple instances on an agent. Not supported on the WCB-200." ::= { coDot11ap 1 } coDot11AccessPointConfigEntry OBJECT-TYPE SYNTAX CoDot11AccessPointConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11AccessPointConfigTable. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coVirtualWlanProfileIndex - Uniquely access a profile for this particular 802.11 interface." AUGMENTS { coVirtualAccessPointConfigEntry } ::= { coDot11AccessPointConfigTable 1 } CoDot11AccessPointConfigEntry ::= SEQUENCE { coDot11RelayBetweenStation TruthValue, coDot11BeaconPeriod Integer32, coDot11DTIMPeriod Integer32, coDot11PrivacyOptionImplemented TruthValue, coDot11RSNAOptionImplemented TruthValue, coDot11NumberOfUsers Unsigned32, coDot11AddToAssociationNotification TruthValue, coDot11PhyTxPowerAdminLevel Integer32, coDot11PhyTxPowerOperLevel Integer32, coDot11CurrentSNRLevel Integer32, coDot11BSSID MacAddress, coDot11AdminMinimumDataRate ColubrisDataRate, coDot11AdminMaximumDataRate ColubrisDataRate, coDot11HighThroughputOptionImplemented TruthValue } coDot11RelayBetweenStation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if wireless client stations can exchange data with one another." ::= { coDot11AccessPointConfigEntry 1 } coDot11BeaconPeriod OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of TUs that a station uses for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames." ::= { coDot11AccessPointConfigEntry 2 } coDot11DTIMPeriod OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of beacon intervals that elapses between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. Client stations use the DTIM to wake up from low-power mode to receive multicast traffic." ::= { coDot11AccessPointConfigEntry 3 } coDot11PrivacyOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the IEEE 802.11 WEP option is enabled." ::= { coDot11AccessPointConfigEntry 4 } coDot11RSNAOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the profile is RSNA-capable." ::= { coDot11AccessPointConfigEntry 5 } coDot11NumberOfUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of users connected via this profile." ::= { coDot11AccessPointConfigEntry 6 } coDot11AddToAssociationNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if an association trap notification is sent each time a user connects to this profile." ::= { coDot11AccessPointConfigEntry 7 } coDot11PhyTxPowerAdminLevel OBJECT-TYPE SYNTAX Integer32 (0..23) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the transmission power of the radio. On Intersil hardware, only a few specific values are allowed. { 13, 17, 23 } for North America, { 13, 17, 20 } for Europe and the rest of the world." ::= { coDot11AccessPointConfigEntry 8 } coDot11PhyTxPowerOperLevel OBJECT-TYPE SYNTAX Integer32 (0..23) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmission power of the radio." ::= { coDot11AccessPointConfigEntry 9 } coDot11CurrentSNRLevel OBJECT-TYPE SYNTAX Integer32 (0..92) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Average SNR level for all the connected client stations." ::= { coDot11AccessPointConfigEntry 10 } coDot11BSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address assigned to this device." ::= { coDot11AccessPointConfigEntry 11 } coDot11AdminMinimumDataRate OBJECT-TYPE SYNTAX ColubrisDataRate MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Specifies the minimum transmission rate that clients stations must meet in order to connect with this profile. Client stations that are below this setting will not be able to connect. The value of this object must always be less or equal than the value of coDot11MaximumDataRate. Allowed values will change according to the state of the radio's wireless mode (coDot11CurrentOperPHYType). ieee802dot11b: Lowest, 1, 2, 5.5, and 11 Meg ieee802dot11a: Lowest, 6, 9, 12, 18, 24, 36, 48, and 54 Meg ieee802dot11g: Lowest, 6, 9, 12, 18, 24, 36, 48, and 54 Meg 11bAndg: All rates permitted." ::= { coDot11AccessPointConfigEntry 12 } coDot11AdminMaximumDataRate OBJECT-TYPE SYNTAX ColubrisDataRate MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Specifies the maximum transmission rate that clients stations must respect to connect with this profile. Clients stations that attempt to associate at a higher data rate will be refused. The value of this object must always be greater than the value of coDot11MinimumDataRate. Allowed values will change according to the state of the radio's wireless mode (coDot11CurrentOperPHYType). ieee802dot11b: 1, 2, 5.5, 11Meg and highest ieee802dot11a: 6, 9, 12, 18, 24, 36, 48, 54 Meg, and highest ieee802dot11g: 6, 9, 12, 18, 24, 36, 48, 54 Meg, and highest 11bAndg: All rates permitted." ::= { coDot11AccessPointConfigEntry 13 } coDot11HighThroughputOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the profile is 802.11n capable." ::= { coDot11AccessPointConfigEntry 14 } -- *** End of Access Point config Table *************************************** -- *** Authentication Algorithms Table **************************************** coDot11AuthenticationAlgorithmsTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11AuthenticationAlgorithmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This (conceptual) table of attributes is a set of all the authentication algorithms supported by the stations. The following are the default values and the associated algorithm: Value = 1: Open System Value = 2: Shared Key" REFERENCE "IEEE Std 802.11-1997, 7.3.1.1" ::= { coDot11ap 2 } coDot11AuthenticationAlgorithmsEntry OBJECT-TYPE SYNTAX CoDot11AuthenticationAlgorithmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AuthenticationAlgorithmsIndex - Uniquely identify an algorithm in the table." INDEX { ifIndex, coDot11AuthenticationAlgorithmsIndex } ::= { coDot11AuthenticationAlgorithmsTable 1 } CoDot11AuthenticationAlgorithmsEntry ::= SEQUENCE { coDot11AuthenticationAlgorithmsIndex Integer32, coDot11AuthenticationAlgorithm INTEGER, coDot11AuthenticationAlgorithmsEnable TruthValue } coDot11AuthenticationAlgorithmsIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the Authentication Algorithms Table." ::= { coDot11AuthenticationAlgorithmsEntry 1 } coDot11AuthenticationAlgorithm OBJECT-TYPE SYNTAX INTEGER { openSystem (1), sharedKey (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies all the authentication algorithms supported by the STAs. The following are the default values and the their associated algorithms. Value = 1: Open System Value = 2: Shared Key" ::= { coDot11AuthenticationAlgorithmsEntry 2 } coDot11AuthenticationAlgorithmsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when true at a station, enables the acceptance of the authentication algorithm described in the corresponding table entry in authentication frames received by the station that have odd authentication sequence numbers. The default value of this attribute is 'true' for the Open System table entry and 'false' for all other table entries." ::= { coDot11AuthenticationAlgorithmsEntry 3 } -- *** End of Authentication Algorithms Table ********************************* -- *** WEP Default Keys Table ************************************************* coDot11WEPDefaultKeysTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11WEPDefaultKeysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for WEP default keys. This table contains the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table will return unsuccessful status and values of null or zero. The default value of each WEP default key is null. This table is not supported on the WCB-200." REFERENCE "IEEE Std 802.11-1997, 8.3.2" ::= { coDot11ap 3 } coDot11WEPDefaultKeysEntry OBJECT-TYPE SYNTAX CoDot11WEPDefaultKeysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WEP Default Keys Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coVirtualWlanProfileIndex - Uniquely access a profile for this particular 802.11 interface." AUGMENTS { coVirtualAccessPointConfigEntry } ::= { coDot11WEPDefaultKeysTable 1 } CoDot11WEPDefaultKeysEntry ::= SEQUENCE { coDot11WEPDefaultKey1Value WEPKeytype, coDot11WEPDefaultKey2Value WEPKeytype, coDot11WEPDefaultKey3Value WEPKeytype, coDot11WEPDefaultKey4Value WEPKeytype } coDot11WEPDefaultKey1Value OBJECT-TYPE SYNTAX WEPKeytype MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key1 value. Reading this attribute will always return a Zero-Length string." ::= { coDot11WEPDefaultKeysEntry 1 } coDot11WEPDefaultKey2Value OBJECT-TYPE SYNTAX WEPKeytype MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key2 value. Reading this attribute will always return a Zero-Length string." ::= { coDot11WEPDefaultKeysEntry 2 } coDot11WEPDefaultKey3Value OBJECT-TYPE SYNTAX WEPKeytype MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key3 value. Reading this attribute will always return a Zero-Length string." ::= { coDot11WEPDefaultKeysEntry 3 } coDot11WEPDefaultKey4Value OBJECT-TYPE SYNTAX WEPKeytype MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key4 value. Reading this attribute will always return a Zero-Length string." ::= { coDot11WEPDefaultKeysEntry 4 } -- *** End of WEP Default Keys Table ****************************************** -- *** Privacy Table ********************************************************** coDot11PrivacyTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PrivacyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group containing attributes related to IEEE 802.11 Privacy. In tabular form to allow multiple instances on an agent. This table is not supported on the WCB-200." ::= { coDot11ap 4 } coDot11PrivacyEntry OBJECT-TYPE SYNTAX CoDot11PrivacyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PrivacyTable Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coVirtualWlanProfileIndex - Uniquely access a profile for this particular 802.11 interface." AUGMENTS { coVirtualAccessPointConfigEntry } ::= { coDot11PrivacyTable 1 } CoDot11PrivacyEntry ::= SEQUENCE { coDot11PrivacyInvoked TruthValue, coDot11WEPDefaultKeyID Integer32, coDot11ExcludeUnencrypted TruthValue, coDot11WEPICVErrorCount Counter32, coDot11WEPExcludedCount Counter32, coDot11RSNAEnabled TruthValue } coDot11PrivacyInvoked OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When this attribute is TRUE, it indicates that some level of security is invoked for transmitting frames of type Data. For IEEE 802.11-1999 clients, the security mechanism used is WEP. For RSNA-capable clients, an additional variable coDot11RSNAEnabled indicates whether RSNA is enabled. If coDot11RSNAEnabled is FALSE or the MIB variable does not exist, the security mechanism invoked is WEP; if coDot11RSNAEnabled is TRUE, RSNA security mechanisms invoked are configured in the coDot11RSNAConfigTable. The default value of this attribute is FALSE." ::= { coDot11PrivacyEntry 1 } coDot11WEPDefaultKeyID OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of zero, one, two, or three. The default value of this attribute is 0." REFERENCE "IEEE Std 802.11-1997, 8.3.2" ::= { coDot11PrivacyEntry 2 } coDot11ExcludeUnencrypted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When this attribute is true, the STA does not indicate at the MAC service interface received MSDUs that have the WEP subfield of the Frame Control field equal to zero. When this attribute is false, the STA may accept MSDUs that have the WEP subfield of the Frame Control field equal to zero. The default value of this attribute shall be true." ::= { coDot11PrivacyEntry 3 } coDot11WEPICVErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter increments when a frame is received with the WEP subfield of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame. ICV errors for TKIP are not counted in this variable but in coDot11RSNAStatsTKIPICVErrors." ::= { coDot11PrivacyEntry 4 } coDot11WEPExcludedCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter increments when a frame is received with the WEP subfield of the Frame Control field set to zero and the value of coDot11ExcludeUnencrypted causes that frame to be discarded." ::= { coDot11PrivacyEntry 5 } coDot11RSNAEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if RSNA is enabled, which means that the RSN Information Element is advertised in Beacons and Probe Responses. This object requires that coDot11PrivacyInvoked also be set to TRUE." ::= { coDot11PrivacyEntry 6 } -- *** End of Privacy Table *************************************************** -- *** Association Table ****************************************************** coDot11AssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11AssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group containing attributes related to associated stations. In tabular form to allow multiple instances on an agent. This table is not supported on the WCB-200." ::= { coDot11ap 5 } coDot11AssociationEntry OBJECT-TYPE SYNTAX CoDot11AssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11Association Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AssociationIndex - Uniquely identify a device inside the association table." INDEX { ifIndex, coDot11AssociationIndex } ::= { coDot11AssociationTable 1 } CoDot11AssociationEntry ::= SEQUENCE { coDot11AssociationIndex Integer32, coDot11StationMACAddress MacAddress, coDot11StationConnectTime Counter32, coDot11SignalLevel Integer32, coDot11NoiseLevel Integer32, coDot11SNR Integer32, coDot11PktsRate1 Counter32, coDot11PktsRate2 Counter32, coDot11PktsRate5dot5 Counter32, coDot11PktsRate11 Counter32, coDot11PktsRate6 Counter32, coDot11PktsRate9 Counter32, coDot11PktsRate12 Counter32, coDot11PktsRate18 Counter32, coDot11PktsRate24 Counter32, coDot11PktsRate36 Counter32, coDot11PktsRate48 Counter32, coDot11PktsRate54 Counter32, coDot11TransmitRate Unsigned32, coDot11ReceiveRate Unsigned32, coDot11InPkts Counter32, coDot11OutPkts Counter32, coDot11InOctets Counter32, coDot11OutOctets Counter32, coDot11StationSSID ColubrisSSIDOrNone, coDot11StationName OCTET STRING, coDot11StationIPAddress IpAddress, coDot11StationVLAN Integer32, coDot11StationLocalInterface InterfaceIndex, coDot11StaHT TruthValue } coDot11AssociationIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the Association Table." ::= { coDot11AssociationEntry 1 } coDot11StationMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Unique MAC Address assigned to the device." ::= { coDot11AssociationEntry 2 } coDot11StationConnectTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in seconds since a station has associated to this device." ::= { coDot11AssociationEntry 3 } coDot11SignalLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Strength of the wireless signal." ::= { coDot11AssociationEntry 4 } coDot11NoiseLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Level of local background noise." ::= { coDot11AssociationEntry 5 } coDot11SNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Relative strength of the signal level compared to the noise level." ::= { coDot11AssociationEntry 6 } coDot11PktsRate1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 1 Mbit/s." ::= { coDot11AssociationEntry 7 } coDot11PktsRate2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 2 Mbit/s." ::= { coDot11AssociationEntry 8 } coDot11PktsRate5dot5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 5.5 Mbit/s." ::= { coDot11AssociationEntry 9 } coDot11PktsRate11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 11 Mbit/s." ::= { coDot11AssociationEntry 10 } coDot11PktsRate6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 6 Mbit/s." ::= { coDot11AssociationEntry 11 } coDot11PktsRate9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 9 Mbit/s." ::= { coDot11AssociationEntry 12 } coDot11PktsRate12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 12 Mbit/s." ::= { coDot11AssociationEntry 13 } coDot11PktsRate18 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 18 Mbit/s." ::= { coDot11AssociationEntry 14 } coDot11PktsRate24 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 24 Mbit/s." ::= { coDot11AssociationEntry 15 } coDot11PktsRate36 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 36 Mbit/s." ::= { coDot11AssociationEntry 16 } coDot11PktsRate48 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 48 Mbit/s." ::= { coDot11AssociationEntry 17 } coDot11PktsRate54 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received at 54 Mbit/s." ::= { coDot11AssociationEntry 18 } coDot11TransmitRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "500Kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit rate of a station." ::= { coDot11AssociationEntry 19 } coDot11ReceiveRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "500Kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Current receive rate of a station." ::= { coDot11AssociationEntry 20 } coDot11InPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received from the station after the association." ::= { coDot11AssociationEntry 21 } coDot11OutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets send to the station after the association." ::= { coDot11AssociationEntry 22 } coDot11InOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received from the station after the association." ::= { coDot11AssociationEntry 23 } coDot11OutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets send to the station after the association." ::= { coDot11AssociationEntry 24 } coDot11StationSSID OBJECT-TYPE SYNTAX ColubrisSSIDOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "SSID of the associated station." ::= { coDot11AssociationEntry 25 } coDot11StationName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the associated station." ::= { coDot11AssociationEntry 26 } coDot11StationIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of the associated station." ::= { coDot11AssociationEntry 27 } coDot11StationVLAN OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the associated station. This object is always available on satellite devices. However, on access-controller devices, this object is only available under certain conditions, when the client station is connected to a profile that is not access-controlled." ::= { coDot11AssociationEntry 28 } coDot11StationLocalInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Local Interface where the associated station traffic will be forwarded to." ::= { coDot11AssociationEntry 29 } coDot11StaHT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the associated station is HT." ::= { coDot11AssociationEntry 30 } -- *** End of Association Table *********************************************** -- *** WDS port Table ********************************************************* coDot11WDSPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11WDSPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for the WDS Ports. This table contains the six WDS MAC address. This table is not supported on the WCB-200." ::= { coDot11ap 6 } coDot11WDSPortEntry OBJECT-TYPE SYNTAX CoDot11WDSPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WDS Port Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11WDSPortIndex - Uniquely identify a WDS port inside the WDS table." INDEX { ifIndex, coDot11WDSPortIndex } ::= { coDot11WDSPortTable 1 } CoDot11WDSPortEntry ::= SEQUENCE { coDot11WDSPortIndex Integer32, coDot11WDSPortMacAddress MacAddress, coDot11WDSPortCurrentRate Unsigned32, coDot11WDSPortSNRLevel Integer32, coDot11WDSPortTxPackets Counter32, coDot11WDSPortTxDropped Counter32, coDot11WDSPortTxErrors Counter32, coDot11WDSPortRxPackets Counter32, coDot11WDSPortRxDropped Counter32, coDot11WDSPortRxErrors Counter32 } coDot11WDSPortIndex OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of WDS ports." ::= { coDot11WDSPortEntry 1 } coDot11WDSPortMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address of the remote device on the other side of the link." ::= { coDot11WDSPortEntry 2 } coDot11WDSPortCurrentRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current rate of the WDS port." ::= { coDot11WDSPortEntry 3 } coDot11WDSPortSNRLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Relative strength of the signal level compared to the noise level." ::= { coDot11WDSPortEntry 4 } coDot11WDSPortTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets transmitted on this WDS port." ::= { coDot11WDSPortEntry 5 } coDot11WDSPortTxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that could not be transmitted on this WDS port." ::= { coDot11WDSPortEntry 6 } coDot11WDSPortTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that could not be sent due to the following reasons: Rx retry limit exceeded or Tx discarded because of wrong SA." ::= { coDot11WDSPortEntry 7 } coDot11WDSPortRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received on this WDS port." ::= { coDot11WDSPortEntry 8 } coDot11WDSPortRxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that were dropped on this WDS port due to a lack of resources." ::= { coDot11WDSPortEntry 9 } coDot11WDSPortRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that could not be received due to the following reasons: Rx discards WEP excluded, Rx discards WEP ICV error, Rx MSG in bad MSG fragments, Rx MSG in MSG fragments Rx WEP undecryptable, Rx FCS errors." ::= { coDot11WDSPortEntry 10 } -- *** End of WDS port Table ************************************************** -- *** Scan Table ************************************************************* coDot11ScanTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11ScanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for the AP scanning results. In tabular form to allow multiple instances on an agent. This table is not supported on the WCB-200." ::= { coDot11ap 7 } coDot11ScanEntry OBJECT-TYPE SYNTAX CoDot11ScanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the AP scan Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11ScanIndex - Uniquely identify an AP in the scan Table." INDEX { ifIndex, coDot11ScanIndex } ::= { coDot11ScanTable 1 } CoDot11ScanEntry ::= SEQUENCE { coDot11ScanIndex Integer32, coDot11ScanMacAddress MacAddress, coDot11ScanChannel Integer32, coDot11ScanSSID ColubrisSSIDOrNone, coDot11ScanSignalLevel Integer32, coDot11ScanNoiseLevel Integer32, coDot11ScanSNR Integer32, coDot11ScanStatus INTEGER, coDot11ScanPHYType INTEGER, coDot11ScanInactivityTime TimeTicks } coDot11ScanIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of AP in the scan table." ::= { coDot11ScanEntry 1 } coDot11ScanMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The wireless MAC address of the remote device." ::= { coDot11ScanEntry 2 } coDot11ScanChannel OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The operating frequency channel of the remote device." ::= { coDot11ScanEntry 3 } coDot11ScanSSID OBJECT-TYPE SYNTAX ColubrisSSIDOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The Service Set ID broadcast by the remote device." ::= { coDot11ScanEntry 4 } coDot11ScanSignalLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Strength of the wireless signal." ::= { coDot11ScanEntry 5 } coDot11ScanNoiseLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Level of local background noise." ::= { coDot11ScanEntry 6 } coDot11ScanSNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Relative strength of the signal level compared to the noise level." ::= { coDot11ScanEntry 7 } coDot11ScanStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), authorized(1), unauthorized(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the scanned device. 'unknown': The device could not determine the status of the scanned AP. 'authorized': The AP is part of the authorized list of APs. 'unauthorized': The AP is not part of the authorized list of APs." ::= { coDot11ScanEntry 8 } coDot11ScanPHYType OBJECT-TYPE SYNTAX INTEGER { ieee802dot11a(1), ieee802dot11b(2), ieee802dot11g(3), ieee802dot11na(4), ieee802dot11ng(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio type used by the device." ::= { coDot11ScanEntry 9 } coDot11ScanInactivityTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time since the last beacon was seen for this device." ::= { coDot11ScanEntry 10 } -- *** End of Scan Table ****************************************************** -- *** Configuration of the AP Scan process *********************************** coDot11ScanEnabled OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if periodic scan should be performed or not. Not supported on the WCB-200. 'enable': Enables periodic scans on this device. 'disable': Disable periodic scans on this device." ::= { coDot11ap 8 } coDot11ScanPeriodicity OBJECT-TYPE SYNTAX Integer32 (10..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time between periodic scans. Each time a scan operation is performed, only one frequency is scanned. A fair amount of periodic scans are needed in order complete a full scan of all the supported frequencies. This parameter only applies when coDot11ScanEnabled is set to 'enable'. Not supported on the WCB-200." DEFVAL { 600 } ::= { coDot11ap 9 } coDot11ScanAuthorizedListURL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the URL of the file that contains a list of all authorized access points. If no valid URL is present in this field, the AP will no be able to compute the rogue table. The format of this file is XML. Each entry in the file is composed of two items: MAC address and SSID. Each entry should appear on a new line. Not supported on the WCB-200." ::= { coDot11ap 10 } coDot11UnauthorizedAPNotificationEnabled OBJECT-TYPE SYNTAX ColubrisNotificationEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if periodic coDot11UnauthorizedAPNotification events are generated. Not supported on the WCB-200." DEFVAL { enable } ::= { coDot11ap 11 } coDot11UnauthorizedAPNotificationInterval OBJECT-TYPE SYNTAX Integer32 (1..1000000) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in minutes between unauthorized AP notifications. Not supported on the WCB-200." ::= { coDot11ap 12 } coDot11AssociationNotificationEnabled OBJECT-TYPE SYNTAX ColubrisNotificationEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if coDot11AssociationNotification events are generated. Not supported on the WCB-200." DEFVAL { disable } ::= { coDot11ap 13 } coDot11AssociationNotificationInterval OBJECT-TYPE SYNTAX Integer32 (0..1000000) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in minutes between association notifications. Setting this attribute to 0 will disable periodic sending of association notification. Not supported on the WCB-200." ::= { coDot11ap 14 } -- *** End of Configuration of the AP Scan process **************************** -- *** Station HT Table ****************************************************** coDot11StationHTTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11StationHTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group containing attributes related to HT stations. This table is not supported on the WCB-200." ::= { coDot11ap 15 } coDot11StationHTEntry OBJECT-TYPE SYNTAX CoDot11StationHTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the station HT Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AssociationIndex - Uniquely identify a device inside the association table." AUGMENTS { coDot11AssociationEntry } ::= { coDot11StationHTTable 1 } CoDot11StationHTEntry ::= SEQUENCE { coDot11StaTransmitMCS Unsigned32, coDot11StaReceiveMCS Unsigned32, coDot11StaChannelWidth INTEGER, coDot11StaShortGI TruthValue, coDot11StaPktsTxMCS0 Counter32, coDot11StaPktsTxMCS1 Counter32, coDot11StaPktsTxMCS2 Counter32, coDot11StaPktsTxMCS3 Counter32, coDot11StaPktsTxMCS4 Counter32, coDot11StaPktsTxMCS5 Counter32, coDot11StaPktsTxMCS6 Counter32, coDot11StaPktsTxMCS7 Counter32, coDot11StaPktsTxMCS8 Counter32, coDot11StaPktsTxMCS9 Counter32, coDot11StaPktsTxMCS10 Counter32, coDot11StaPktsTxMCS11 Counter32, coDot11StaPktsTxMCS12 Counter32, coDot11StaPktsTxMCS13 Counter32, coDot11StaPktsTxMCS14 Counter32, coDot11StaPktsTxMCS15 Counter32, coDot11StaPktsRxMCS0 Counter32, coDot11StaPktsRxMCS1 Counter32, coDot11StaPktsRxMCS2 Counter32, coDot11StaPktsRxMCS3 Counter32, coDot11StaPktsRxMCS4 Counter32, coDot11StaPktsRxMCS5 Counter32, coDot11StaPktsRxMCS6 Counter32, coDot11StaPktsRxMCS7 Counter32, coDot11StaPktsRxMCS8 Counter32, coDot11StaPktsRxMCS9 Counter32, coDot11StaPktsRxMCS10 Counter32, coDot11StaPktsRxMCS11 Counter32, coDot11StaPktsRxMCS12 Counter32, coDot11StaPktsRxMCS13 Counter32, coDot11StaPktsRxMCS14 Counter32, coDot11StaPktsRxMCS15 Counter32 } coDot11StaTransmitMCS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MSC used while trasnmitting the last frame to the HT station." ::= { coDot11StationHTEntry 1 } coDot11StaReceiveMCS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MCS used by the last frame received from the HT station." ::= { coDot11StationHTEntry 2 } coDot11StaChannelWidth OBJECT-TYPE SYNTAX INTEGER { cw20MHz(1), cw40MHz(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Channel width used by the wireless client." ::= { coDot11StationHTEntry 3 } coDot11StaShortGI OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the wireless client is using short GI." ::= { coDot11StationHTEntry 4 } coDot11StaPktsTxMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS0." ::= { coDot11StationHTEntry 5 } coDot11StaPktsTxMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS1." ::= { coDot11StationHTEntry 6 } coDot11StaPktsTxMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS2." ::= { coDot11StationHTEntry 7 } coDot11StaPktsTxMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS3." ::= { coDot11StationHTEntry 8 } coDot11StaPktsTxMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS4." ::= { coDot11StationHTEntry 9 } coDot11StaPktsTxMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS5." ::= { coDot11StationHTEntry 10 } coDot11StaPktsTxMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS6." ::= { coDot11StationHTEntry 11 } coDot11StaPktsTxMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS7." ::= { coDot11StationHTEntry 12 } coDot11StaPktsTxMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS8." ::= { coDot11StationHTEntry 13 } coDot11StaPktsTxMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS9." ::= { coDot11StationHTEntry 14 } coDot11StaPktsTxMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS10." ::= { coDot11StationHTEntry 15 } coDot11StaPktsTxMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS11." ::= { coDot11StationHTEntry 16 } coDot11StaPktsTxMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS12." ::= { coDot11StationHTEntry 17 } coDot11StaPktsTxMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS13." ::= { coDot11StationHTEntry 18 } coDot11StaPktsTxMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS14." ::= { coDot11StationHTEntry 19 } coDot11StaPktsTxMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames while using MCS15." ::= { coDot11StationHTEntry 20 } coDot11StaPktsRxMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS0." ::= { coDot11StationHTEntry 21 } coDot11StaPktsRxMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS1." ::= { coDot11StationHTEntry 22 } coDot11StaPktsRxMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS2." ::= { coDot11StationHTEntry 23 } coDot11StaPktsRxMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS3." ::= { coDot11StationHTEntry 24 } coDot11StaPktsRxMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS4." ::= { coDot11StationHTEntry 25 } coDot11StaPktsRxMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS5." ::= { coDot11StationHTEntry 26 } coDot11StaPktsRxMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS6." ::= { coDot11StationHTEntry 27 } coDot11StaPktsRxMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS7." ::= { coDot11StationHTEntry 28 } coDot11StaPktsRxMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS8." ::= { coDot11StationHTEntry 29 } coDot11StaPktsRxMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS9." ::= { coDot11StationHTEntry 30 } coDot11StaPktsRxMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS10." ::= { coDot11StationHTEntry 31 } coDot11StaPktsRxMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS11." ::= { coDot11StationHTEntry 32 } coDot11StaPktsRxMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS12." ::= { coDot11StationHTEntry 33 } coDot11StaPktsRxMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS13." ::= { coDot11StationHTEntry 34 } coDot11StaPktsRxMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS14." ::= { coDot11StationHTEntry 35 } coDot11StaPktsRxMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames while using MCS15." ::= { coDot11StationHTEntry 36 } -- *** End of Station HT Table *********************************************** -- *** MAC Attribute Templates ************************************************ -- *** Operation Table ******************************************************** coDot11OperationTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11OperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group contains MAC attributes pertaining to the operation of the MAC. In tabular form to allow multiple instances on an agent." ::= { coDot11mac 1 } coDot11OperationEntry OBJECT-TYPE SYNTAX CoDot11OperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11OperationEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11OperationTable 1 } CoDot11OperationEntry ::= SEQUENCE { coDot11MACAddress MacAddress, coDot11RTSThreshold Integer32, coDot11ShortRetryLimit Integer32, coDot11LongRetryLimit Integer32, coDot11FragmentationThreshold Integer32, coDot11MaxTransmitMSDULifetime Unsigned32, coDot11MaxReceiveLifetime Unsigned32, coDot11ManufacturerID DisplayString, coDot11ProductID DisplayString, coDot11RadioType ColubrisRadioType } coDot11MACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Unique MAC Address assigned to the STA." ::= { coDot11OperationEntry 1 } coDot11RTSThreshold OBJECT-TYPE SYNTAX Integer32 (128..1540|2347) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated the number of octets in an MPDU, below which an RTS/CTS handshake is not performed. An RTS/CTS handshake is performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size has the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. The default value of this attribute is 2347." ::= { coDot11OperationEntry 2 } coDot11ShortRetryLimit OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of transmission attempts of a frame, the length of which is less than or equal to coDot11RTSThreshold, that are made before a failure condition is indicated. The default value of this attribute is 7." ::= { coDot11OperationEntry 3 } coDot11LongRetryLimit OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of transmission attempts of a frame, the length of which is greater than coDot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute is 4." ::= { coDot11OperationEntry 4 } coDot11FragmentationThreshold OBJECT-TYPE SYNTAX Integer32 (256..2346) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU is broken down into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU is fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute is the lesser of 2346 or the aMPDUMaxLength of the attached PHY and will never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute will never be less than 256. " ::= { coDot11OperationEntry 5 } coDot11MaxTransmitMSDULifetime OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in TU after the initial transmission of an MSDU, after which further attempts to transmit the MSDU are terminated. The default value of this attribute is 512." ::= { coDot11OperationEntry 6 } coDot11MaxReceiveLifetime OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble the MMPDU or MSDU is terminated. The default value is 512." ::= { coDot11OperationEntry 7 } coDot11ManufacturerID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the manufacturer. It may include additional information at the manufacturer's discretion. The default value of this attribute is null." ::= { coDot11OperationEntry 8 } coDot11ProductID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "An identifier that is unique to the manufacturer. It may include additional information at the manufacturer's discretion. The default value is null." ::= { coDot11OperationEntry 9 } coDot11RadioType OBJECT-TYPE SYNTAX ColubrisRadioType MAX-ACCESS read-only STATUS current DESCRIPTION "Identify the wireless device inside the Colubris product." ::= { coDot11OperationEntry 10 } -- *** End of Operation Table ************************************************* -- *** Counters Table ********************************************************* coDot11CountersTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11CountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group containing attributes that are MAC counters. In tabular form to allow multiple instance on an agent." ::= { coDot11mac 2 } coDot11CountersEntry OBJECT-TYPE SYNTAX CoDot11CountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11CountersEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11CountersTable 1 } CoDot11CountersEntry ::= SEQUENCE { coDot11TransmittedFragmentCount Counter32, coDot11MulticastTransmittedFrameCount Counter32, coDot11FailedCount Counter32, coDot11RetryCount Counter32, coDot11MultipleRetryCount Counter32, coDot11FrameDuplicateCount Counter32, coDot11RTSSuccessCount Counter32, coDot11RTSFailureCount Counter32, coDot11ACKFailureCount Counter32, coDot11ReceivedFragmentCount Counter32, coDot11MulticastReceivedFrameCount Counter32, coDot11FCSErrorCount Counter32, coDot11TransmittedFrameCount Counter32, coDot11WEPUndecryptableCount Counter32 } coDot11TransmittedFragmentCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management." ::= { coDot11CountersEntry 1 } coDot11MulticastTransmittedFrameCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs." ::= { coDot11CountersEntry 2 } coDot11FailedCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the coDot11ShortRetryLimit or coDot11LongRetryLimit." ::= { coDot11CountersEntry 3 } coDot11RetryCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when an MSDU is successfully transmitted after one or more retransmissions." ::= { coDot11CountersEntry 4 } coDot11MultipleRetryCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when an MSDU is successfully transmitted after more than one retransmission." ::= { coDot11CountersEntry 5 } coDot11FrameDuplicateCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a frame is received that the Sequence Control field indicates is a duplicate." ::= { coDot11CountersEntry 6 } coDot11RTSSuccessCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a CTS is received in response to an RTS." ::= { coDot11CountersEntry 7 } coDot11RTSFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a CTS is not received in response to an RTS." ::= { coDot11CountersEntry 8 } coDot11ACKFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when an ACK is not received when expected." ::= { coDot11CountersEntry 9 } coDot11ReceivedFragmentCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented for each successfully received MPDU of type Data or Management." ::= { coDot11CountersEntry 10 } coDot11MulticastReceivedFrameCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a MSDU is received with the multicast bit set in the destination MAC address." ::= { coDot11CountersEntry 11 } coDot11FCSErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when an FCS error is detected in a received MPDU." ::= { coDot11CountersEntry 12 } coDot11TransmittedFrameCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented for each successfully transmitted MSDU." ::= { coDot11CountersEntry 13 } coDot11WEPUndecryptableCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a frame is received with the WEP subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option." ::= { coDot11CountersEntry 14 } -- *** End of Counters Table ************************************************** -- *** PHY Attribute Templates ************************************************ -- *** Phy Operation Table **************************************************** coDot11PhyOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PhyOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PHY level attributes concerned with operation. In tabular form to allow multiple instances on an agent." ::= { coDot11phy 1 } coDot11PhyOperationEntry OBJECT-TYPE SYNTAX CoDot11PhyOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PhyOperation Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11PhyOperationTable 1 } CoDot11PhyOperationEntry ::= SEQUENCE { coDot11PHYType INTEGER, coDot11CurrentRegDomain Integer32, coDot11TempType INTEGER, coDot11CurrentOperFrequency Unsigned32, coDot11CurrentOperPHYType INTEGER, coDot11Sensitivity INTEGER, coDot11RadioEnabled TruthValue, coDot11OperatingMode INTEGER, coDot11AutoChannelEnabled TruthValue, coDot11AutoChannelInterval INTEGER, coDot11AutoPowerEnabled TruthValue, coDot11AutoPowerInterval INTEGER } coDot11PHYType OBJECT-TYPE SYNTAX INTEGER { fhss(1), dsss(2), irbaseband(3), ofdm(4), ht(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, OFDM 5 GHz = 04" ::= { coDot11PhyOperationEntry 1 } coDot11CurrentRegDomain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current regulatory domain this instance of the PMD is supporting. This object corresponds to one of the RegDomains listed in coDot11RegDomainsSupported." ::= { coDot11PhyOperationEntry 2 } coDot11TempType OBJECT-TYPE SYNTAX INTEGER { tempType1(1), tempType2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "There are different operating temperature requirements dependent on the anticipated environmental conditions. This attribute describes the current PHY's operating temperature range capability. Currently defined values and their corresponding temperature ranges are: Type 1 = X'01'-Commercial range of 0 to 40 degrees C, Type 2 = X'02'-Industrial range of -30 to 70 degrees C." ::= { coDot11PhyOperationEntry 3 } coDot11CurrentOperFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current operating frequency channel of the radio." ::= { coDot11PhyOperationEntry 4 } coDot11CurrentOperPHYType OBJECT-TYPE SYNTAX INTEGER { ieee802dot11a(1), ieee802dot11b(2), ieee802dot11g(3), ieee802dot11bAndg(4), ieee802dot11aTurbo(5), ieee802dot11n(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operating phy type of the radio." ::= { coDot11PhyOperationEntry 5 } coDot11Sensitivity OBJECT-TYPE SYNTAX INTEGER { large(1), medium(2), small(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Receiver sensitivity of the radio." ::= { coDot11PhyOperationEntry 6 } coDot11RadioEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When True the radio is enabled." ::= { coDot11PhyOperationEntry 7 } coDot11OperatingMode OBJECT-TYPE SYNTAX INTEGER { accessPointAndWirelessLinks(1), accessPointOnly(2), wirelessLinksOnly(3), monitor(4), sensor(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operating mode of the radio. Available options are: Access point and Wireless links: Standard operating mode provides support for all wireless functions. Access point only: Only provides access point functionality, wireless links cannot be created. Wireless links only: Only provides wireless links functionality. Wireless client stations cannot connect. Monitor: Enables the radio to be used for monitoring (wireless neighborhood) only. Both access point and wireless links functionality are disabled. Sensor: Enables the radio to be used for monitoring only." ::= { coDot11PhyOperationEntry 8 } coDot11AutoChannelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When True the Auto Channel option is enabled." ::= { coDot11PhyOperationEntry 9 } coDot11AutoChannelInterval OBJECT-TYPE SYNTAX INTEGER { disable(0), timeOfDay(1), oneHour(60), twoHours(120), fourHours(240), eightHours(480), twelveHours(720), tweentyFourHours(1440) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval, in minutes, between auto rescanning of the channels. Maximum is 1440 minutes (24 hours). A value of zero disables automatic rescanning of channels, the radio will automatically select a channel when the interface intializes and utilize that channel as long as the interface is operational." ::= { coDot11PhyOperationEntry 10 } coDot11AutoPowerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When True the Auto Power option is enabled." ::= { coDot11PhyOperationEntry 11 } coDot11AutoPowerInterval OBJECT-TYPE SYNTAX INTEGER { oneHour(60), twoHours(120), fourHours(240), eightHours(480), twelveHours(720), tweentyFourHours(1440) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval, in minutes, between auto rescanning of the channels. Maximum is 1440 minutes (24 hours)." ::= { coDot11PhyOperationEntry 12 } -- *** End of Phy Operation Table ********************************************* -- *** Phy Antenna Table ****************************************************** coDot11PhyAntennaTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PhyAntennaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group of attributes for PhyAntenna. In tabular form to allow multiple instances on an agent." ::= { coDot11phy 2 } coDot11PhyAntennaEntry OBJECT-TYPE SYNTAX CoDot11PhyAntennaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PhyAntenna Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11PhyAntennaTable 1 } CoDot11PhyAntennaEntry ::= SEQUENCE { coDot11CurrentTxAntenna Integer32, coDot11DiversitySupport INTEGER, coDot11CurrentRxAntenna Integer32 } coDot11CurrentTxAntenna OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The current antenna being used to transmit. This value is one of the values appearing in coDot11SupportedTxAntenna. This may be used by a management agent to control which antenna is used for transmission." ::= { coDot11PhyAntennaEntry 1 } coDot11DiversitySupport OBJECT-TYPE SYNTAX INTEGER { fixedlist(1), notsupported(2), dynamic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This implementation's support for diversity, encoded as: X'01': Diversity is available and is performed over the fixed list of antennas defined in coDot11DiversitySelectionRx. X'02': Diversity is not supported. X'03': Diversity is supported and control of diversity is also available, in which case the attribute coDot11DiversitySelectionRx can be dynamically modified by the LME." ::= { coDot11PhyAntennaEntry 2 } coDot11CurrentRxAntenna OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The current antenna being used to receive, if the coDot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the antennae marked for receive in the coDot11AntennasListTable." ::= { coDot11PhyAntennaEntry 3 } -- *** End of Phy Antenna Table *********************************************** -- *** Phy Config Table ******************************************************* coDot11PhyConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PhyConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PHY configuration attributes. In tabular form to allow multiple instances on an agent." ::= { coDot11phy 3 } coDot11PhyConfigEntry OBJECT-TYPE SYNTAX CoDot11PhyConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PhyConfig Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11PhyConfigTable 1 } CoDot11PhyConfigEntry ::= SEQUENCE { coDot11PhyAdminStatus INTEGER, coDot11PhyOperStatus INTEGER } coDot11PhyAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the radio interface. 'up': Sets the radio interface to be ready to pass packets. 'down': Stops the transmit and receive of packets on the interface." ::= { coDot11PhyConfigEntry 1 } coDot11PhyOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the radio interface. 'up': The radio interface is ready to pass packets. 'down': The radio is not able to transmit nor receive packets on the interface." ::= { coDot11PhyConfigEntry 2 } -- *** End of Phy Config Table ************************************************ -- *** Phy DSSS Table ********************************************************* coDot11PhyDSSSTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PhyDSSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of attributes for coDot11PhyDSSSEntry. In tabular form to allow multiple instances on an agent. This table only apply when in DSSS 2.4 GHz range" ::= { coDot11phy 4 } coDot11PhyDSSSEntry OBJECT-TYPE SYNTAX CoDot11PhyDSSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PhyDSSSEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11PhyDSSSTable 1 } CoDot11PhyDSSSEntry ::= SEQUENCE { coDot11CurrentChannel Integer32, coDot11CCAModeSupported Integer32, coDot11CurrentCCAMode INTEGER } coDot11CurrentChannel OBJECT-TYPE SYNTAX Integer32 (1..14) MAX-ACCESS read-write STATUS current DESCRIPTION "The desired operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2." ::= { coDot11PhyDSSSEntry 1 } coDot11CCAModeSupported OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-only STATUS current DESCRIPTION "coDot11CCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01, carrier sense only (CS_ONLY) = 02, carrier sense and energy detect (ED_and_CS)= 04 or the logical sum of any of these values." ::= { coDot11PhyDSSSEntry 2 } coDot11CurrentCCAMode OBJECT-TYPE SYNTAX INTEGER { edonly(1), csonly(2), edandcs(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current CCA method in operation. Valid values are: energy detect only (edonly) = 01, carrier sense only (csonly) = 02, carrier sense and energy detect (edandcs)= 04." ::= { coDot11PhyDSSSEntry 3 } -- *** End of Phy DSSS Table ************************************************** -- *** Regulation Domains Supported ******************************************* coDot11RegDomainsSupportedTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11RegDomainsSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of Europe) = X'30', Spain = X'31', France = X'32', Japan = X'41' " ::= { coDot11phy 5 } coDot11RegDomainsSupportedEntry OBJECT-TYPE SYNTAX CoDot11RegDomainsSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11RegDomainsSupported Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11RegDomainsSupportIndex - Uniquely specifies the regulatory domain in the table." INDEX { ifIndex, coDot11RegDomainsSupportIndex } ::= { coDot11RegDomainsSupportedTable 1 } CoDot11RegDomainsSupportedEntry ::= SEQUENCE { coDot11RegDomainsSupportIndex Integer32, coDot11RegDomainsSupportValue INTEGER } coDot11RegDomainsSupportIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the RegDomainsSupported Table." ::= { coDot11RegDomainsSupportedEntry 1 } coDot11RegDomainsSupportValue OBJECT-TYPE SYNTAX INTEGER { fcc(16), doc(32), etsi(48), spain (49), france(50), japan (65) } MAX-ACCESS read-only STATUS current DESCRIPTION "There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of Europe) = X'30', Spain = X'31', France = X'32', Japan = X'41' " ::= { coDot11RegDomainsSupportedEntry 2 } -- *** End of Regulation Domains Supported ************************************ -- *** Antennas List Table **************************************************** coDot11AntennasListTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11AntennasListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the list of antennae. An antenna can be marked to be capable of transmitting, receiving, and/or for participation in receive diversity. Each entry in this table represents a single antenna with its properties. The maximum number of antennae that can be contained in this table is 255." ::= { coDot11phy 6 } coDot11AntennasListEntry OBJECT-TYPE SYNTAX CoDot11AntennasListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11AntennasListTable, representing the properties of a single antenna. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AntennaListIndex - Uniquely identifies the antenna connected to the 802.11 interface." INDEX { ifIndex, coDot11AntennaListIndex } ::= { coDot11AntennasListTable 1 } CoDot11AntennasListEntry ::= SEQUENCE { coDot11AntennaListIndex Integer32, coDot11SupportedTxAntenna TruthValue, coDot11SupportedRxAntenna TruthValue, coDot11DiversitySelectionRx TruthValue } coDot11AntennaListIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of an antenna which is used to identify the columnar objects in the coDot11AntennasList Table." ::= { coDot11AntennasListEntry 1 } coDot11SupportedTxAntenna OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When true, this object indicates that the antenna represented by coDot11AntennaIndex can be used as a transmit antenna." ::= { coDot11AntennasListEntry 2 } coDot11SupportedRxAntenna OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When true, this object indicates that the antenna represented by the coDot11AntennaIndex can be used as a receive antenna." ::= { coDot11AntennasListEntry 3 } coDot11DiversitySelectionRx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When true, this object indicates that the antenna represented by coDot11AntennaIndex can be used for receive diversity. This object may only be true if the antenna can be used as a receive antenna, as indicated by coDot11SupportedRxAntenna." ::= { coDot11AntennasListEntry 4 } -- *** End of Antennas List Table ********************************************* -- *** Supported Data Rates Tx ************************************************ coDot11SupportedDataRatesTxTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11SupportedDataRatesTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, data rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject to limitations of each individual PHY." ::= { coDot11phy 7 } coDot11SupportedDataRatesTxEntry OBJECT-TYPE SYNTAX CoDot11SupportedDataRatesTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the coDot11SupportedDataRatesTx Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11SupportedDataRatesTxIndex - Uniquely identifies a supported rate in the table." INDEX { ifIndex, coDot11SupportedDataRatesTxIndex } ::= { coDot11SupportedDataRatesTxTable 1 } CoDot11SupportedDataRatesTxEntry ::= SEQUENCE { coDot11SupportedDataRatesTxIndex Integer32, coDot11SupportedDataRatesTxValue Integer32 } coDot11SupportedDataRatesTxIndex OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index object which identifies which data rate to access." ::= { coDot11SupportedDataRatesTxEntry 1 } coDot11SupportedDataRatesTxValue OBJECT-TYPE SYNTAX Integer32 (2..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, data rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject to limitations of each individual PHY." ::= { coDot11SupportedDataRatesTxEntry 2 } -- *** End of Supported Data Rates Tx ***************************************** -- *** Supported Data Rates Rx ************************************************ coDot11SupportedDataRatesRxTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11SupportedDataRatesRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The receive bit rates supported by the PLCP and PMD, data rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject to limitations of each individual PHY." ::= { coDot11phy 8 } coDot11SupportedDataRatesRxEntry OBJECT-TYPE SYNTAX CoDot11SupportedDataRatesRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the coDot11SupportedDataRatesRx Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11SupportedDataRatesTxIndex - Uniquely identifies a supported rate in the table." INDEX { ifIndex, coDot11SupportedDataRatesRxIndex } ::= { coDot11SupportedDataRatesRxTable 1 } CoDot11SupportedDataRatesRxEntry ::= SEQUENCE { coDot11SupportedDataRatesRxIndex Integer32, coDot11SupportedDataRatesRxValue Integer32 } coDot11SupportedDataRatesRxIndex OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index object which identifies which data rate to access." ::= { coDot11SupportedDataRatesRxEntry 1 } coDot11SupportedDataRatesRxValue OBJECT-TYPE SYNTAX Integer32 (2..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The receive bit rates supported by the PLCP and PMD, data rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject to limitations of each individual PHY." ::= { coDot11SupportedDataRatesRxEntry 2 } -- *** End of Supported Data Rates Rx ***************************************** -- *** Phy OFDM Table ********************************************************* coDot11PhyOFDMTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PhyOFDMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of attributes for coDot11PhyOFDMEntry. In tabular form to allow multiple instances on an agent. This table only apply when in OFDM 5 GHz range." ::= { coDot11phy 9 } coDot11PhyOFDMEntry OBJECT-TYPE SYNTAX CoDot11PhyOFDMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PhyOFDMEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11PhyOFDMTable 1 } CoDot11PhyOFDMEntry ::= SEQUENCE { coDot11CurrentFrequency Integer32, coDot11TIThreshold Integer32, coDot11FrequencyBandsSupported Integer32 } coDot11CurrentFrequency OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "The desired operating frequency channel of the OFDM PHY." ::= { coDot11PhyOFDMEntry 1 } coDot11TIThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold." ::= { coDot11PhyOFDMEntry 2 } coDot11FrequencyBandsSupported OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The capability of the OFDM PHY implementation to operate in the three U-NII bands. Coded as an integer value of a three bit fields as follow: bit 0 .. capable of operating in the lower (5.15-5.25 GHz) U-NII band. bit 1 .. capable of operating in the middle (5.25-5.35 GHz) U-NII band. bit 2 .. capable of operating in the middle (5.725-5.825 GHz) U-NII band. For example, for an implementation capable of operating in the lower and middle bands, this attribute would take the value 3." ::= { coDot11PhyOFDMEntry 3 } -- *** End of Phy OFDM Table ************************************************** -- *** PHY General Confifuration attributes *********************************** coDot11MinimumSNRLevel OBJECT-TYPE SYNTAX Integer32 (0..92) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "An SNR level notification is generated when the average SNR level is below this attribute. Not supported on the WCB-200." ::= { coDot11phy 10 } coDot11SNRLevelNotificationEnabled OBJECT-TYPE SYNTAX ColubrisNotificationEnable MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute, when true, enables the generation of SNR level notifications. Not supported on the WCB-200." DEFVAL { enable } ::= { coDot11phy 11 } coDot11SNRLevelNotificationInterval OBJECT-TYPE SYNTAX Integer32 (1..1000000) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in minutes between SNR Level notifications. Not supported on the WCB-200." ::= { coDot11phy 12 } coDot11CountryCode OBJECT-TYPE SYNTAX INTEGER { world(1), albania(8), algeria(12), azerbaijan(31), argentina(32), australia(36), austria(40), bahrain(48), armenia(51), belgium(56), bolivia(68), brazil(76), belize(84), bruneiDarussalam(96), bulgaria(100), belarus(112), canada(124), chile(152), china(156), taiwan(158), colombia(170), costaRica(188), croatia(191), cyprus(196), czechRepublic(203), denmark(208), dominicanRepublic(214), ecuador(218), elSalvador(222), estonia(233), finland(246), france(250), georgia(268), germany(276), greece(300), guatemala(320), honduras(340), hongkong(344), hungary(348), iceland(352), india(356), indonesia(360), iran(364), ireland(372), israel(376), italy(380), japanW52W53(392), japanW52W53J52(393), japanJ52(395), japanJ5280211j(396), japanClient(397), kazakhstan(398), jordan(400), kenya(404), northKorea(408), southKorea(410), kuwait(414), lebanon(422), latvia(428), liechtenstein(438), lithuania(440), luxembourg(442), macau(446), malaysia(458), mexico(484), monaco(492), morocco(504), oman(512), netherlands(528), newZealand(554), norway(578), pakistan(586), panama(591), peru(604), philippines(608), poland(616), portugal(620), puertoRico(630), qatar(634), romania(642), russianFederation(643), saudiArabia(682), singapore(702), slovakia(703), vietNam(704), slovenia(705), southAfrica(710), zimbabwe(716), spain(724), sweden(752), switzerland(756), syria(760), thailand(764), trinidadAndTobago(780), unitedArabEmirates(784), tunisia(788), turkey(792), ukraine(804), macedonia(807), egypt(818), unitedKingdom(826), unitedKingdom58GHz(827), -- United Kingdom 5.8GHz licensed unitedStates(840), uruguay(858), uzbekistan(860), venezuela(862), yemen(887) } MAX-ACCESS read-only STATUS current DESCRIPTION "The radios are running accordingly to the regulations of this country." ::= { coDot11phy 13 } -- *** Phy HT Table ********************************************************* coDot11PhyHTTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11PhyHTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of attributes for coDot11PhyHTEntry. This table only apply when the PHY type is HT." ::= { coDot11phy 14 } coDot11PhyHTEntry OBJECT-TYPE SYNTAX CoDot11PhyHTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11PhyHTEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { coDot11PhyHTTable 1 } CoDot11PhyHTEntry ::= SEQUENCE { coDot11FortyMHzOperationImplemented TruthValue, coDot11FortyMHzOperationEnabled TruthValue, coDot11CurrentPrimaryChannel Integer32, coDot11CurrentSecondaryChannel Integer32, coDot11GreenfieldOptionImplemented TruthValue, coDot11GreenfieldOptionEnabled TruthValue, coDot11ShortGIOptionInTwentyImplemented TruthValue, coDot11ShortGIOptionInTwentyEnabled TruthValue, coDot11ShortGIOptionInFortyImplemented TruthValue, coDot11ShortGIOptionInFortyEnabled TruthValue, coDot11HighestSupportedDataRate Integer32 } coDot11FortyMHzOperationImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the 40 MHz Operation is implemented." ::= { coDot11PhyHTEntry 1 } coDot11FortyMHzOperationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the 40 MHz Operation is enabled." ::= { coDot11PhyHTEntry 2 } coDot11CurrentPrimaryChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the operating channel. If 20/40 MHz Mode is currently in use then this attribute indicates the primary channel." ::= { coDot11PhyHTEntry 3 } coDot11CurrentSecondaryChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the channel number of the secondary channel. If 20/40 MHz mode is not currently in use, this attribute value shall be 0." ::= { coDot11PhyHTEntry 4 } coDot11GreenfieldOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the HT Greenfield option is implemented." ::= { coDot11PhyHTEntry 5 } coDot11GreenfieldOptionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the HT Greenfield option is enabled." ::= { coDot11PhyHTEntry 6 } coDot11ShortGIOptionInTwentyImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the Short Guard option is implemented for 20 MHz operation." ::= { coDot11PhyHTEntry 7 } coDot11ShortGIOptionInTwentyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the Short Guard option is enabled for 20 MHz operation." ::= { coDot11PhyHTEntry 8 } coDot11ShortGIOptionInFortyImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the Short Guard option is implemented for 40 MHz operation." ::= { coDot11PhyHTEntry 9 } coDot11ShortGIOptionInFortyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the Short Guard option is enabled for 40 MHz operation." ::= { coDot11PhyHTEntry 10 } coDot11HighestSupportedDataRate OBJECT-TYPE SYNTAX Integer32 (0..600) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall specify the Highest Data Rate in Mb/s at which the station may receive data." ::= { coDot11PhyHTEntry 11 } -- *** End of Phy HT Table ************************************************** -- *** End of PHY General Configuration attributes **************************** -- *** RSNA statistics ******************************************************** coDot11RSNAStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CoDot11RSNAStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains statistics for SN. It is not supported on the WCB-200." ::= { colubris802dot11 4 } coDot11RSNAStatsEntry OBJECT-TYPE SYNTAX CoDot11RSNAStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the coDot11RSNAStatsTable." AUGMENTS { coVirtualAccessPointConfigEntry } ::= { coDot11RSNAStatsTable 1 } CoDot11RSNAStatsEntry ::= SEQUENCE { coDot11RSNAStatsVersion Unsigned32, coDot11RSNAStatsSelectedPairwiseCipher OCTET STRING, coDot11RSNAStatsTKIPICVErrors Counter32, coDot11RSNAStatsTKIPLocalMICFailures Counter32, coDot11RSNAStatsTKIPRemoteMICFailures Counter32, coDot11RSNAStatsTKIPCounterMeasuresInvoked Counter32, coDot11RSNAStatsCCMPFormatErrors Counter32, coDot11RSNAStatsCCMPReplays Counter32, coDot11RSNAStatsCCMPDecryptErrors Counter32, coDot11RSNAStatsTKIPReplays Counter32, coDot11RSNAStats4WayHandshakeFailures Counter32 } coDot11RSNAStatsVersion OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The RSNA version which the AP associated with." ::= { coDot11RSNAStatsEntry 2 } coDot11RSNAStatsSelectedPairwiseCipher OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The AKM Suite the AP selected during association. The value consists of a three octet OUI followed by a one octet type as follows: OUI Value, Cipher, Type XX-XX-XX, 0, Reserved XX-XX-XX, 1, WEP-40 XX-XX-XX, 2, TKIP XX-XX-XX, 3, Reserved XX-XX-XX, 4, CCMP XX-XX-XX, 5, WEP-104 XX-XX-XX, 6-255, Reserved Vendor, any, Vendor Specific other, any, Reserved" ::= { coDot11RSNAStatsEntry 3 } coDot11RSNAStatsTKIPICVErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of TKIP ICV errors encountered when decrypting packets for the AP." ::= { coDot11RSNAStatsEntry 4 } coDot11RSNAStatsTKIPLocalMICFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of Michael MIC failure encountered when checking the integrity of packets received from the AP at this entity." ::= { coDot11RSNAStatsEntry 5 } coDot11RSNAStatsTKIPRemoteMICFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of Michael MIC failures encountered by the remote device and reported back to this entity." ::= { coDot11RSNAStatsEntry 6 } coDot11RSNAStatsTKIPCounterMeasuresInvoked OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times a MIC failure occurred two times within 60 seconds and countermeasures were invoked. This variable counts this for both local and remote. It increments every time countermeasures are invoked." ::= { coDot11RSNAStatsEntry 7 } coDot11RSNAStatsCCMPFormatErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDUs received with an invalid CCMP format." ::= { coDot11RSNAStatsEntry 8 } coDot11RSNAStatsCCMPReplays OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received unicast fragments discarded by the replay mechanism." ::= { coDot11RSNAStatsEntry 9 } coDot11RSNAStatsCCMPDecryptErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received fragments discarded by the CCMP decryption algorithm." ::= { coDot11RSNAStatsEntry 10 } coDot11RSNAStatsTKIPReplays OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of TKIP replay errors detected." ::= { coDot11RSNAStatsEntry 11 } coDot11RSNAStats4WayHandshakeFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of 4-Way Handshake failures." ::= { coDot11RSNAStatsEntry 12 } -- *** End of RSNA statistics ************************************************* -- *** Notifications ********************************************************** coDot11ManagementMIBNotificationPrefix OBJECT IDENTIFIER ::= { colubris802dot11 5 } coDot11ManagementMIBNotifications OBJECT IDENTIFIER ::= { coDot11ManagementMIBNotificationPrefix 0 } coDot11SNRLevelNotification NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, coVirtualApSSID, coDot11CurrentSNRLevel } STATUS current DESCRIPTION "The average SNR level for all the stations using this virtual ap during the last three intervals is low." --#SUMMARY "Low SNR of %d for wireless profile %s on interface %s" --#ARGUMENTS { 3, 2, 1 } --#SEVERITY WARNING --#CATEGORY "Colubris Networks Alarms" ::= { coDot11ManagementMIBNotifications 1 } coDot11AssociationNotification NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, coDot11StationName, coDot11StationSSID, coDot11StationIPAddress, coDot11StationMACAddress, coDot11SignalLevel, coDot11SNR, coDot11TransmitRate, coDot11NumberOfUsers } STATUS current DESCRIPTION "Sent when a new association is made or sent periodically using interval specified by coDot11AssociationNotificationInterval object." --#SUMMARY "Device %s MAC:%s SNR:%d wirelessly associated on interface %s SSID %s." --#ARGUMENTS { 2, 5, 7, 1, 3 } --#SEVERITY INFORMATIONAL --#CATEGORY "Colubris Networks Alarms" ::= { coDot11ManagementMIBNotifications 2 } coDot11UnauthorizedAPNotification NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, coDot11ScanSSID, coDot11ScanMacAddress, coDot11ScanChannel, coDot11ScanPHYType } STATUS current DESCRIPTION "Sent when a new unauthorized AP is detected." --#SUMMARY "Unauthorized Device %s MAC:%s detected on interface %s." --#ARGUMENTS { 2, 3, 1 } --#SEVERITY MAJOR --#CATEGORY "Colubris Networks Alarms" ::= { coDot11ManagementMIBNotifications 3 } -- *** End of Notifications *************************************************** -- *** Conformance Information ************************************************ coDot11Conformance OBJECT IDENTIFIER ::= { colubris802dot11 6 } coDot11Groups OBJECT IDENTIFIER ::= { coDot11Conformance 1 } coDot11Compliances OBJECT IDENTIFIER ::= { coDot11Conformance 2 } -- *** compliance statements ************************************************** coDot11Compliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for SNMPv2 entities that implement the IEEE 802.11 MIB." MODULE MANDATORY-GROUPS { coDot11APBaseGroup, coDot11MACBaseGroup, coDot11CountersGroup, coDot11SmtAuthenticationAlgorithmsGroup, coDot11PhyConfigComplianceGroup, coDot11PhyConfigGroup, coDot11APPrivacyGroup, coDot11MACStatisticsGroup, coDot11PhyAntennaComplianceGroup, coDot11PhyRegDomainsSupportGroup, coDot11PhyAntennasListGroup, coDot11PhyRateGroup, coDot11AssociationGroup, coDot11AssociationConfigGroup, coDot11ScanGroup, coDot11ScanConfigGroup, coDot11WDSComplianceGroup, coDot11NotificationGroup, coDot11StationHTGroup } GROUP coDot11PhyDSSSComplianceGroup DESCRIPTION "Implementation of this group is required when object coDot11PHYType has the value of dsss." GROUP coDot11PhyOFDMComplianceGroup DESCRIPTION "Implementation of this group is required when object coDot11PHYType has the value of ofdm." GROUP coDot11PhyHTComplianceGroup DESCRIPTION "Implementation of this group is required when object coDot11PHYType has the value of ht." ::= { coDot11Compliances 1 } coDot11RSNCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities that implement the IEEE 802.11 RSN MIB." MODULE MANDATORY-GROUPS { coDot11RSNBase } ::= { coDot11Compliances 2 } coDot11ComplianceExt MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities that implement the IEEE 802.11 MIB." MODULE MANDATORY-GROUPS { coDot11APBaseGroupExt, coDot11MACBaseGroup, coDot11CountersGroup, coDot11SmtAuthenticationAlgorithmsGroup, coDot11PhyConfigComplianceGroup, coDot11PhyConfigGroup, coDot11APPrivacyGroup, coDot11MACStatisticsGroup, coDot11PhyAntennaComplianceGroup, coDot11PhyRegDomainsSupportGroup, coDot11PhyAntennasListGroup, coDot11PhyRateGroup, coDot11AssociationGroup, coDot11AssociationConfigGroup, coDot11ScanGroup, coDot11ScanConfigGroup, coDot11WDSComplianceGroup, coDot11NotificationGroup, coDot11StationHTGroup } GROUP coDot11PhyDSSSComplianceGroup DESCRIPTION "Implementation of this group is required when object coDot11PHYType has the value of dsss." GROUP coDot11PhyOFDMComplianceGroup DESCRIPTION "Implementation of this group is required when object coDot11PHYType has the value of ofdm." GROUP coDot11PhyHTComplianceGroup DESCRIPTION "Implementation of this group is required when object coDot11PHYType has the value of ht." ::= { coDot11Compliances 3 } -- *** Groups - units of conformance ****************************************** coDot11APBaseGroup OBJECT-GROUP OBJECTS { coDot11RelayBetweenStation, coDot11PrivacyOptionImplemented, coDot11RSNAOptionImplemented, coDot11BeaconPeriod, coDot11DTIMPeriod, coDot11NumberOfUsers, coDot11AddToAssociationNotification, coDot11PhyTxPowerAdminLevel, coDot11PhyTxPowerOperLevel, coDot11BSSID, coDot11AdminMinimumDataRate, coDot11AdminMaximumDataRate, coDot11HighThroughputOptionImplemented } STATUS deprecated DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network. coDot11AdminMinimumDataRate and coDot11AdminMaximumDataRate are deprecated." ::= { coDot11Groups 1 } coDot11APPrivacyGroup OBJECT-GROUP OBJECTS { coDot11PrivacyInvoked, coDot11ExcludeUnencrypted, coDot11WEPICVErrorCount, coDot11WEPExcludedCount, coDot11WEPDefaultKeyID, coDot11WEPDefaultKey1Value, coDot11WEPDefaultKey2Value, coDot11WEPDefaultKey3Value, coDot11WEPDefaultKey4Value, coDot11RSNAEnabled } STATUS current DESCRIPTION "The APPrivacy package is a set of attributes that shall be present if WEP is implemented in the Access Point." ::= { coDot11Groups 2 } coDot11MACBaseGroup OBJECT-GROUP OBJECTS { coDot11MACAddress, coDot11RTSThreshold, coDot11ShortRetryLimit, coDot11LongRetryLimit, coDot11FragmentationThreshold, coDot11MaxTransmitMSDULifetime, coDot11MaxReceiveLifetime, coDot11ManufacturerID, coDot11ProductID, coDot11RadioType } STATUS current DESCRIPTION "The MAC object class provides the necessary support for the access control, generation, and verification of frame check sequences, and proper delivery of valid data to upper layers." ::= { coDot11Groups 3 } coDot11MACStatisticsGroup OBJECT-GROUP OBJECTS { coDot11RetryCount, coDot11MultipleRetryCount } STATUS current DESCRIPTION "The MACStatistics package provides extended statistical information on the operation of the MAC. This package is completely optional." ::= { coDot11Groups 4 } coDot11SmtAuthenticationAlgorithmsGroup OBJECT-GROUP OBJECTS { coDot11AuthenticationAlgorithm, coDot11AuthenticationAlgorithmsEnable } STATUS current DESCRIPTION "Authentication Algorithm Table." ::= { coDot11Groups 5 } coDot11PhyConfigComplianceGroup OBJECT-GROUP OBJECTS { coDot11MinimumSNRLevel, coDot11CurrentSNRLevel, coDot11Sensitivity, coDot11PhyAdminStatus, coDot11PhyOperStatus, coDot11PHYType, coDot11CurrentRegDomain, coDot11TempType, coDot11CurrentOperFrequency, coDot11CurrentOperPHYType, coDot11RadioEnabled, coDot11OperatingMode, coDot11AutoChannelEnabled, coDot11AutoChannelInterval, coDot11AutoPowerEnabled, coDot11AutoPowerInterval } STATUS current DESCRIPTION "PHY layer operations attributes." ::= { coDot11Groups 6 } coDot11PhyConfigGroup OBJECT-GROUP OBJECTS { coDot11SNRLevelNotificationEnabled, coDot11SNRLevelNotificationInterval, coDot11CountryCode } STATUS current DESCRIPTION "PHY notification configuration attributes." ::= { coDot11Groups 7 } coDot11PhyAntennaComplianceGroup OBJECT-GROUP OBJECTS { coDot11CurrentTxAntenna, coDot11DiversitySupport, coDot11CurrentRxAntenna } STATUS current DESCRIPTION "Phy antenna attributes." ::= { coDot11Groups 8 } coDot11PhyDSSSComplianceGroup OBJECT-GROUP OBJECTS { coDot11CurrentChannel, coDot11CCAModeSupported, coDot11CurrentCCAMode } STATUS current DESCRIPTION "Attributes that configure the DSSS for IEEE 802.11." ::= { coDot11Groups 9 } coDot11PhyRegDomainsSupportGroup OBJECT-GROUP OBJECTS { coDot11RegDomainsSupportValue } STATUS current DESCRIPTION "Attributes that specify the supported Regulation Domains." ::= { coDot11Groups 10 } coDot11PhyAntennasListGroup OBJECT-GROUP OBJECTS { coDot11SupportedTxAntenna, coDot11SupportedRxAntenna, coDot11DiversitySelectionRx } STATUS current DESCRIPTION "Antennas list attributes." ::= { coDot11Groups 11 } coDot11PhyRateGroup OBJECT-GROUP OBJECTS { coDot11SupportedDataRatesTxValue, coDot11SupportedDataRatesRxValue } STATUS current DESCRIPTION "Attributes for Data Rates for IEEE 802.11." ::= { coDot11Groups 12 } coDot11CountersGroup OBJECT-GROUP OBJECTS { coDot11TransmittedFragmentCount, coDot11MulticastTransmittedFrameCount, coDot11FailedCount, coDot11FrameDuplicateCount, coDot11RTSSuccessCount, coDot11RTSFailureCount, coDot11ACKFailureCount, coDot11ReceivedFragmentCount, coDot11MulticastReceivedFrameCount, coDot11FCSErrorCount, coDot11WEPUndecryptableCount, coDot11TransmittedFrameCount } STATUS current DESCRIPTION "Attributes from the coDot11CountersGroup that are not described in the coDot11MACStatistics group. These objects are mandatory." ::= { coDot11Groups 13 } coDot11AssociationGroup OBJECT-GROUP OBJECTS { coDot11StationMACAddress, coDot11StationConnectTime, coDot11SignalLevel, coDot11NoiseLevel, coDot11SNR, coDot11PktsRate1, coDot11PktsRate2, coDot11PktsRate5dot5, coDot11PktsRate6, coDot11PktsRate9, coDot11PktsRate11, coDot11PktsRate12, coDot11PktsRate18, coDot11PktsRate24, coDot11PktsRate36, coDot11PktsRate48, coDot11PktsRate54, coDot11TransmitRate, coDot11ReceiveRate, coDot11InPkts, coDot11OutPkts, coDot11InOctets, coDot11OutOctets, coDot11StationSSID, coDot11StationName, coDot11StationIPAddress, coDot11StationVLAN, coDot11StationLocalInterface, coDot11StaHT } STATUS current DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the association table." ::= { coDot11Groups 14 } coDot11AssociationConfigGroup OBJECT-GROUP OBJECTS { coDot11AssociationNotificationEnabled, coDot11AssociationNotificationInterval } STATUS current DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the association table. Not supported on the WCB-200." ::= { coDot11Groups 15 } coDot11ScanGroup OBJECT-GROUP OBJECTS { coDot11ScanMacAddress, coDot11ScanChannel, coDot11ScanSSID, coDot11ScanSignalLevel, coDot11ScanNoiseLevel, coDot11ScanSNR, coDot11ScanStatus, coDot11ScanPHYType, coDot11ScanInactivityTime } STATUS current DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the scan table. " ::= { coDot11Groups 16 } coDot11ScanConfigGroup OBJECT-GROUP OBJECTS { coDot11ScanEnabled, coDot11ScanPeriodicity, coDot11ScanAuthorizedListURL, coDot11UnauthorizedAPNotificationEnabled, coDot11UnauthorizedAPNotificationInterval } STATUS current DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the scan table. Not supported on the WCB-200." ::= { coDot11Groups 17 } coDot11WDSComplianceGroup OBJECT-GROUP OBJECTS { coDot11WDSPortMacAddress, coDot11WDSPortCurrentRate, coDot11WDSPortSNRLevel, coDot11WDSPortTxPackets, coDot11WDSPortTxDropped, coDot11WDSPortTxErrors, coDot11WDSPortRxPackets, coDot11WDSPortRxDropped, coDot11WDSPortRxErrors } STATUS current DESCRIPTION "Attributes that configure the WDS table." ::= { coDot11Groups 18 } coDot11NotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { coDot11SNRLevelNotification, coDot11AssociationNotification, coDot11UnauthorizedAPNotification } STATUS current DESCRIPTION "A collection of supported notifications." ::= { coDot11Groups 19 } coDot11RSNBase OBJECT-GROUP OBJECTS { coDot11RSNAStatsVersion, coDot11RSNAStatsSelectedPairwiseCipher, coDot11RSNAStatsTKIPICVErrors, coDot11RSNAStatsTKIPLocalMICFailures, coDot11RSNAStatsTKIPRemoteMICFailures, coDot11RSNAStatsTKIPCounterMeasuresInvoked, coDot11RSNAStatsCCMPFormatErrors, coDot11RSNAStatsCCMPReplays, coDot11RSNAStatsCCMPDecryptErrors, coDot11RSNAStatsTKIPReplays, coDot11RSNAStats4WayHandshakeFailures } STATUS current DESCRIPTION "The coDot11RSNBase object class provides the necessary support for managing RSNA functionality in the STA" ::= { coDot11Groups 20 } coDot11PhyOFDMComplianceGroup OBJECT-GROUP OBJECTS { coDot11CurrentFrequency, coDot11TIThreshold, coDot11FrequencyBandsSupported } STATUS current DESCRIPTION "Attributes that configure the OFDM for IEEE 802.11." ::= { coDot11Groups 21 } coDot11StationHTGroup OBJECT-GROUP OBJECTS { coDot11StaTransmitMCS, coDot11StaReceiveMCS, coDot11StaChannelWidth, coDot11StaShortGI, coDot11StaPktsTxMCS0, coDot11StaPktsTxMCS1, coDot11StaPktsTxMCS2, coDot11StaPktsTxMCS3, coDot11StaPktsTxMCS4, coDot11StaPktsTxMCS5, coDot11StaPktsTxMCS6, coDot11StaPktsTxMCS7, coDot11StaPktsTxMCS8, coDot11StaPktsTxMCS9, coDot11StaPktsTxMCS10, coDot11StaPktsTxMCS11, coDot11StaPktsTxMCS12, coDot11StaPktsTxMCS13, coDot11StaPktsTxMCS14, coDot11StaPktsTxMCS15, coDot11StaPktsRxMCS0, coDot11StaPktsRxMCS1, coDot11StaPktsRxMCS2, coDot11StaPktsRxMCS3, coDot11StaPktsRxMCS4, coDot11StaPktsRxMCS5, coDot11StaPktsRxMCS6, coDot11StaPktsRxMCS7, coDot11StaPktsRxMCS8, coDot11StaPktsRxMCS9, coDot11StaPktsRxMCS10, coDot11StaPktsRxMCS11, coDot11StaPktsRxMCS12, coDot11StaPktsRxMCS13, coDot11StaPktsRxMCS14, coDot11StaPktsRxMCS15 } STATUS current DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the station HT table." ::= { coDot11Groups 22 } coDot11PhyHTComplianceGroup OBJECT-GROUP OBJECTS { coDot11FortyMHzOperationImplemented, coDot11FortyMHzOperationEnabled, coDot11CurrentPrimaryChannel, coDot11CurrentSecondaryChannel, coDot11GreenfieldOptionImplemented, coDot11GreenfieldOptionEnabled, coDot11ShortGIOptionInTwentyImplemented, coDot11ShortGIOptionInTwentyEnabled, coDot11ShortGIOptionInFortyImplemented, coDot11ShortGIOptionInFortyEnabled, coDot11HighestSupportedDataRate } STATUS current DESCRIPTION "Attributes that configure the HT for IEEE 802.11." ::= { coDot11Groups 23 } coDot11APBaseGroupExt OBJECT-GROUP OBJECTS { coDot11RelayBetweenStation, coDot11PrivacyOptionImplemented, coDot11RSNAOptionImplemented, coDot11BeaconPeriod, coDot11DTIMPeriod, coDot11NumberOfUsers, coDot11AddToAssociationNotification, coDot11PhyTxPowerAdminLevel, coDot11PhyTxPowerOperLevel, coDot11BSSID, coDot11HighThroughputOptionImplemented } STATUS current DESCRIPTION "The AP object class provides the necessary support at the Access Point to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network." ::= { coDot11Groups 24 } END