EQLRAID-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Integer32, Unsigned32, Counter64, OBJECT-TYPE,MODULE-IDENTITY, enterprises FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC ifEntry FROM RFC1213-MIB eqlGroupId FROM EQLGROUP-MIB eqlStoragePoolIndex FROM EQLSTORAGEPOOL-MIB eqlMemberIndex, eqlDriveGroupIndex FROM EQLMEMBER-MIB; eqlRAIDModule MODULE-IDENTITY LAST-UPDATED "200804150215Z" -- time is actually local time ORGANIZATION "EqualLogic Inc." CONTACT-INFO "Contact: Customer Support Postal: EqualLogic Inc 9 Townsend st., Nashua, NH 03063 Tel: +1 603-579-9762 E-mail: support@equallogic.com WEB: www.equallogic.com" DESCRIPTION "Equallogic Inc. Storage Array raid mib Mib files packaged on Tue Apr 15 02:15:37 EDT 2008 for Storage Array Firmware V3.3.2 (R73102) Copyright (c) 2002, 2004 by EqualLogic, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by EqualLogic, Inc. This software embodies proprietary information and trade secrets of EqualLogic, Inc. " -- Revision history, in reverse chronological order REVISION "200211110000Z" -- 02-Nov-11 DESCRIPTION "Initial revision" ::= { enterprises equalLogic(12740) 10 } eqlRAIDObjects OBJECT IDENTIFIER ::= { eqlRAIDModule 1 } eqlRAIDNotifications OBJECT IDENTIFIER ::= { eqlRAIDModule 2 } eqlRAIDConformance OBJECT IDENTIFIER ::= { eqlRAIDModule 3 } -- EqualLogic RAID Device Table eqlRAIDDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF EqlRAIDDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EqualLogic-Dynamic Table representing a list of all of the RAID devices in a group" ::= { eqlRAIDObjects 1 } eqlRAIDDeviceEntry OBJECT-TYPE SYNTAX EqlRAIDDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A sequence of attributes pertaining to a single RAID device in a group" INDEX {eqlGroupId, eqlMemberIndex, eqlRAIDDeviceLUNIndex } ::={ eqlRAIDDeviceTable 1 } EqlRAIDDeviceEntry ::= SEQUENCE { eqlRAIDDeviceLUNIndex Integer32, eqlRAIDDeviceLUN Integer32, eqlRAIDDeviceOperStatus INTEGER, eqlRAIDDeviceUUID OCTET STRING, eqlRAIDDeviceDriveCount Integer32, eqlRAIDDeviceLayoutOperStatus INTEGER, eqlRAIDDeviceLayoutSectPerSU Integer32, eqlRAIDDeviceLUNCapacity Counter64, eqlRAIDDeviceLostBlocks Integer32, eqlRAIDDeviceOutIOOps Integer32, eqlRAIDDeviceCacheWrites Integer32, eqlRAIDDeviceCacheReads Integer32, eqlRAIDDeviceCompCacheWrites Counter64, eqlRAIDDeviceCompCacheReads Counter64, eqlRAIDDeviceSectWritten Counter64, eqlRAIDDeviceSectRead Counter64, eqlRAIDDeviceStoragePoolIndex Unsigned32, eqlRAIDDeviceDriveGroupIndex Unsigned32 } eqlRAIDDeviceLUNIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LUN number of the RAID device, incremented by one for SNMP compatibility. Valid LUN numbers begin at zero. " ::= { eqlRAIDDeviceEntry 1 } eqlRAIDDeviceLUN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LUN of the drive. In all cases the value of this variable will be equal to eqlRAIDDeviceLUNIndex-1." ::= { eqlRAIDDeviceEntry 2 } eqlRAIDDeviceOperStatus OBJECT-TYPE SYNTAX INTEGER { noDevice(1), dataLoss(2), nominal(3), degraded(4), failed(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the RAID device. Values are as follows: 1 - no device 2 - data loss 3 - nominal 4 - degraded 5 - failed " ::= { eqlRAIDDeviceEntry 3 } eqlRAIDDeviceUUID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "a 16 byte identifier for the device that is guranteed to be universally unique" ::= { eqlRAIDDeviceEntry 4 } eqlRAIDDeviceDriveCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of drives used by the RAID device" ::= { eqlRAIDDeviceEntry 5 } eqlRAIDDeviceLayoutOperStatus OBJECT-TYPE SYNTAX INTEGER { noOp(1), expSuspended(2), expInProgress(3), swapSuspended(4), swapInProgress(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the currently executing layout operation on the device (if any) 1 - no operation in progress 2 - exp suspended 3 - exp in progress 4 - swap suspended 5 - swap in progress" ::= { eqlRAIDDeviceEntry 6 } eqlRAIDDeviceLayoutSectPerSU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sectors per stripe unit in this layout" ::= { eqlRAIDDeviceEntry 7 } eqlRAIDDeviceLUNCapacity OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current LUN capacity of this layout in sectors, including internal layout operations" ::= { eqlRAIDDeviceEntry 8 } eqlRAIDDeviceLostBlocks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bad soft sectors" ::= { eqlRAIDDeviceEntry 9 } eqlRAIDDeviceOutIOOps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Th number of I/O operations currently in progress on the device" ::= { eqlRAIDDeviceEntry 10 } eqlRAIDDeviceCacheWrites OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of cache write operations in progress on the device" ::= { eqlRAIDDeviceEntry 11 } eqlRAIDDeviceCacheReads OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of cache read operations in progress on the device" ::= { eqlRAIDDeviceEntry 12 } eqlRAIDDeviceCompCacheWrites OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of completed cache write operations since the system was started" ::= { eqlRAIDDeviceEntry 13 } eqlRAIDDeviceCompCacheReads OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of completed cache read operations since the system was started" ::= { eqlRAIDDeviceEntry 14 } eqlRAIDDeviceSectWritten OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sectors written since the system was started" ::= { eqlRAIDDeviceEntry 15 } eqlRAIDDeviceSectRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sectors read since the system was started" ::= { eqlRAIDDeviceEntry 16 } eqlRAIDDeviceStoragePoolIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field specifies a unique index for identifying a storage pool." ::= { eqlRAIDDeviceEntry 17 } eqlRAIDDeviceDriveGroupIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field specifies a unique index for identifying a drive group." ::= { eqlRAIDDeviceEntry 18 } -- EqualLogic RAID Layout Table eqlRAIDLayoutTable OBJECT-TYPE SYNTAX SEQUENCE OF EqlRAIDLayoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EqualLogic-Dynamic Table listing the layouts in existence in a RAID device. Typically, there will only be a single entry for each device. When layout operations are in progress, there will be two layouts. The layout represents a set of drives and a parity configuration for the drives." ::= { eqlRAIDObjects 2 } eqlRAIDLayoutEntry OBJECT-TYPE SYNTAX EqlRAIDLayoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a sequence of attributes belonging to a single layout group" INDEX { eqlGroupId, eqlMemberIndex, eqlRAIDDeviceLUNIndex, eqlRAIDLayoutIndex } ::={ eqlRAIDLayoutTable 1 } EqlRAIDLayoutEntry ::= SEQUENCE { eqlRAIDLayoutIndex INTEGER, eqlRAIDLayoutOperStatus INTEGER, eqlRAIDLayoutNumParityGrp Integer32, eqlRAIDLayoutParityType INTEGER, eqlRAIDLayoutBeginLBA Counter64, eqlRAIDLayoutLength Counter64 } eqlRAIDLayoutIndex OBJECT-TYPE SYNTAX INTEGER { first(1), second(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identifier for this instance of a layout. The layouts are 1-indexed where the primary is index 1, and the secindary (if any) is index 2" ::={ eqlRAIDLayoutEntry 1 } eqlRAIDLayoutOperStatus OBJECT-TYPE SYNTAX INTEGER { noDevice(1), noLayout(2), failed(3), nominal(4), degraded(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the layout as follows: 1 - no device 2 - no layout 3 - failed 4 - nominal 5 - degraded" ::={ eqlRAIDLayoutEntry 2 } eqlRAIDLayoutNumParityGrp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of parity groups in this layout" ::={ eqlRAIDLayoutEntry 3 } eqlRAIDLayoutParityType OBJECT-TYPE SYNTAX INTEGER { stripe(0), raid1(1), raid10(10), raid5(5), raid50(50) } MAX-ACCESS read-only STATUS current DESCRIPTION "The parity type of this layout: 0 - stripe 1 - raid1 mirror 10- raid10 multi raid1 parity groups 5 - raid5 50- multi raid5 parity groups" ::={ eqlRAIDLayoutEntry 4 } eqlRAIDLayoutBeginLBA OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The beginning RAID LBA of this layout" ::={ eqlRAIDLayoutEntry 5 } eqlRAIDLayoutLength OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Length in sectors of this layout. This value can be used to determine the progress of layout operations." ::={ eqlRAIDLayoutEntry 6 } -- EqualLogic RAID Parity Group Table eqlRAIDParityGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF EqlRAIDParityGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EqualLogic-Dynamic Table. Each layout on a RAID device has one or more parity groups. The groups are indexed starting at 1. Each group represents a set of drives consisting of one stripe and one parity drive with one or more data drives. Each groups is reconstructed and verified as a whole and can be done so independently of other partity groups in the set. RAID 0, 1, and 5 have only one parity grouping per layout. RAID 10 and 50 have multiple parity groups per layout. " ::= { eqlRAIDObjects 3 } eqlRAIDParityGroupEntry OBJECT-TYPE SYNTAX EqlRAIDParityGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a sequence of attributes belonging to a single parity group" INDEX { eqlGroupId, eqlMemberIndex, eqlRAIDDeviceLUNIndex, eqlRAIDLayoutIndex, eqlParityGrpIndex } ::={ eqlRAIDParityGroupTable 1 } EqlRAIDParityGroupEntry ::= SEQUENCE { eqlParityGrpIndex Integer32, eqlParityGrpOperStatus INTEGER, eqlParityGrpDriveCount Integer32, eqlParityGrpOperation INTEGER, eqlParityGrpReconstChkpt Counter64, eqlParityGrpVerifyChkpt Counter64 } eqlParityGrpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A numeric index describing the instance of this parity group" ::={ eqlRAIDParityGroupEntry 1 } eqlParityGrpOperStatus OBJECT-TYPE SYNTAX INTEGER { noDevice(1), noLayout(2), noGroup(3), degraded(4), failed(5), nominal(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the parity group: 1 - no device 2 - no layout 3 - no group 4 - degraded 4 - failed 5 - nominal " ::={ eqlRAIDParityGroupEntry 2 } eqlParityGrpDriveCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of drives in the parity group" ::={ eqlRAIDParityGroupEntry 3 } eqlParityGrpOperation OBJECT-TYPE SYNTAX INTEGER { verify(1), reconstruct(2), noOp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current parity group operation underway on this group (if any): 1 - verify 2 - reconstruct 3 - no operation" ::={ eqlRAIDParityGroupEntry 4 } eqlParityGrpReconstChkpt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Reconstruction checkpoint: The number of sectors that have been completed during the reconstruction operation. This can be compared to the corresonding value for eqlRAIDLayoutLength and eqlRAIDLayoutBeginLBA to setermine the progress of the operation." ::={ eqlRAIDParityGroupEntry 5 } eqlParityGrpVerifyChkpt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Verify checkpoint: The number of sectors that have been completed during the verify operation. This can be compared to the corresonding value for eqlRAIDLayoutLength and eqlRAIDLayoutBeginLBA to setermine the progress of the operation." ::={ eqlRAIDParityGroupEntry 6 } -- EqualLogic RAID Drive Table eqlRAIDDriveTable OBJECT-TYPE SYNTAX SEQUENCE OF EqlRAIDDriveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EqualLogic-Dynamic Table. The RAID Drive Table contains an entry for each drive in the system. The mapping between the enties in this table and the entries in the eqlDisk table is one to one. This table is intended to store the RAID attributes of each drive." ::= { eqlRAIDObjects 4 } eqlRAIDDriveEntry OBJECT-TYPE SYNTAX EqlRAIDDriveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a sequence of RAID attributes for a single drive in the group" INDEX { eqlGroupId, eqlMemberIndex, eqlRAIDDriveDriveLUNIndex } ::={ eqlRAIDDriveTable 1 } EqlRAIDDriveEntry ::= SEQUENCE { eqlRAIDDriveDriveLUNIndex Integer32, eqlRAIDDriveDriveLUN Integer32, eqlRAIDDriveOperStatus INTEGER, eqlRAIDDriveUUID OCTET STRING, eqlRAIDDiskIndex Integer32, eqlRAIDDeviceIndex Integer32 } eqlRAIDDriveDriveLUNIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LUN index of the drive. In all cases the value of the index will be one greater than the value of the LUN ID of this drive. Thus, where LUNs will start at the number 0 and increment, LUN index entries will start at the number one and increment. " ::= { eqlRAIDDriveEntry 1 } eqlRAIDDriveDriveLUN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LUN of the drive. In all cases the value of this variable will be equal to eqlRAIDDriveLUNIndex-1." ::= { eqlRAIDDriveEntry 2 } eqlRAIDDriveOperStatus OBJECT-TYPE SYNTAX INTEGER { noDrive(1), active(2), failed(3), tooSmall(4), reconstruct(5), swap(6), spare(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the drive: 1 - no drive 2 - active 3 - failed 4 - too small 5 - reconstructing 6 - swapping 7 - spare" ::= { eqlRAIDDriveEntry 3 } eqlRAIDDriveUUID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 16 byte univerally unique identifier for the drive. This should be unique throughout the universe of drives in EqualLogic arrays." ::= { eqlRAIDDriveEntry 4 } eqlRAIDDiskIndex OBJECT-TYPE SYNTAX Integer32 (1..14) MAX-ACCESS read-only STATUS current DESCRIPTION "The index value that uniquely identifies the disk. It is equal to the disk slot number plus one. The value of this will correspond to a value of eqlDiskIndex in the eqlDiskTable." ::= { eqlRAIDDriveEntry 5 } eqlRAIDDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the device this disk belongs to. It is equal to a value of eqlRAIDDeviceLUNIndex in the eqlRAIDDeviceTable." ::= { eqlRAIDDriveEntry 6 } --++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ eqlStoragePoolRAIDLUNTable OBJECT-TYPE SYNTAX SEQUENCE OF EqlStoragePoolRAIDLUNEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EqualLogic-Dynamic Storage Pool RAID LUN Table" ::= { eqlRAIDObjects 5 } eqlStoragePoolRAIDLUNEntry OBJECT-TYPE SYNTAX EqlStoragePoolRAIDLUNEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing a RAID LUN mapping to a storage pool." INDEX { eqlStoragePoolIndex, eqlMemberIndex, eqlDriveGroupIndex, eqlRAIDDeviceLUNIndex } ::= { eqlStoragePoolRAIDLUNTable 1 } EqlStoragePoolRAIDLUNEntry ::= SEQUENCE { eqlStoragePoolRAIDLUNfoo Integer32 } eqlStoragePoolRAIDLUNfoo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus" ::= { eqlStoragePoolRAIDLUNEntry 1 } END