-- ================================================================== -- Copyright (C) 2008 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI-OSPFV2-MIB provides information about OSPFv2 -- Reference: -- Version: V1.0 -- History: -- , , -- HUAWEI 2008-1-05 OSPF private MIB -- ================================================================== -- ================================================================== -- -- Variables and types are imported -- -- ================================================================== HUAWEI-OSPFV2-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB ospfRouterId, ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, ospfNbrState FROM OSPF-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus FROM SNMPv2-TC; hwOspfv2MIB MODULE-IDENTITY LAST-UPDATED "201004221150Z" -- April 22, 2010 at 11:50 GMT ORGANIZATION "Huawei Technologies co., Ltd." CONTACT-INFO "R&D BeiJing Huawei Technologies co., Ltd. Huawei Bld., NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 Http://www.huawei.com E-mail:support@huawei.com" DESCRIPTION "The HUAWEI-OSPFV2-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the system and on peripheral devices. The MIB is proper for system configuration. There are no constraints on this MIB." ::= { hwDatacomm 155 } hwOspfv2MIBObjects OBJECT IDENTIFIER ::= { hwOspfv2MIB 1 } hwOspfv2MIBBinding OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The ID of OSPF process that is bound to OSPF public MIB and the process will respond to SNMP requests from OSPF public MIB. The default value 0 means that no process is bound to OSPF public MIB." ::= { hwOspfv2MIBObjects 1 } hwOspfv2ChangeTable OBJECT IDENTIFIER ::= { hwOspfv2MIB 2 } hwOspfv2MIBObjectsChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This node is used to record the time ticks when hwOspfv2MIBObjectsTable changed last time." ::= { hwOspfv2ChangeTable 1 } hwOspfv2ProcessChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This node is used to record the time ticks when hwOspfv2ProcessTable changed last time." ::= { hwOspfv2ChangeTable 2 } hwOspfv2AreaChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This node is used to record the time ticks when hwOspfv2AreaTable changed last time." ::= { hwOspfv2ChangeTable 3 } hwOspfv2NetworkChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This node is used to record the time ticks when hwOspfv2NetworkTable changed last time." ::= { hwOspfv2ChangeTable 4 } hwOspfv2ProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOspfv2ProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the configured parameters of the router's attached OSPF processes." ::= { hwOspfv2MIB 3 } hwOspfv2ProcessEntry OBJECT-TYPE SYNTAX HwOspfv2ProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the configured parameters of the router's attached OSPF processes." INDEX { hwOspfv2ProcessIdIndex } ::= { hwOspfv2ProcessTable 1 } HwOspfv2ProcessEntry ::= SEQUENCE { hwOspfv2ProcessIdIndex Integer32, hwOspfv2VpnName DisplayString, hwOspfv2ConfigRouterId IpAddress, hwOspfv2ActualRouterId IpAddress, hwOspfv2BandwidthReference Unsigned32, hwOspfv2Description DisplayString, hwOspfv2LsaArriveIntvl Integer32, hwOspfv2LsaArriveMaxIntvl Integer32, hwOspfv2LsaArriveStartIntvl Integer32, hwOspfv2LsaArriveHoldIntvl Integer32, hwOspfv2LsaOrigIntvl Integer32, hwOspfv2LsaOrigMaxIntvl Integer32, hwOspfv2LsaOrigStartIntvl Integer32, hwOspfv2LsaOrigHoldIntvl Integer32, hwOspfv2LsaOrigIntvlOtherType Integer32, hwOspfv2LsdbOverflowLimit Integer32, hwOspfv2MaxLoadBalaNumber Integer32, hwOspfv2AseRouteMaxNumber Integer32, hwOspfv2InterRouteMaxNumber Integer32, hwOspfv2IntraRouteMaxNumber Integer32, hwOspfv2RetransLimitMaxNumber Integer32, hwOspfv2Rfc1583Compatibility TruthValue, hwOspfv2ShamHello TruthValue, hwOspfv2SpfSchIntvlUnit INTEGER, hwOspfv2SpfSchIntvlNumber Integer32, hwOspfv2SpfSchMaxIntvl Integer32, hwOspfv2SpfSchStartIntvl Integer32, hwOspfv2SpfSchHoldIntvl Integer32, hwOspfv2OpaqueCapability TruthValue, hwOspfv2TrafficAdjustment TruthValue, hwOspfv2TrafficAdvertise TruthValue, hwOspfv2FlushTimer Integer32, hwOspfv2ProcessRowStatus RowStatus } hwOspfv2ProcessIdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The process ID indicates the OSPF process number. The value ranges from 1 to 65535." ::= { hwOspfv2ProcessEntry 1 } hwOspfv2VpnName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of VPN instance to which the process belongs. The process instance needs to be specified when the process is created, and then cannot be changed." ::= { hwOspfv2ProcessEntry 2 } hwOspfv2ConfigRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit integer uniquely identifies the router in the Autonomous System. OSPF private router ID can be configured through this node. The default value is 0.0.0.0. If the value of this node is 0.0.0.0, it means that no private router ID is set for this process. " DEFVAL { '00000000'h } ::= { hwOspfv2ProcessEntry 3 } hwOspfv2ActualRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This node is used to get actual router ID of process and it is a read-only node. If the node hwOspfv2ConfigRouterId is not set, the actual router ID should default to the value of one of the router's IP interface addresses. By default, the value is '00000000'H." ::= { hwOspfv2ProcessEntry 4 } hwOspfv2BandwidthReference OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbit/s" MAX-ACCESS read-create STATUS current DESCRIPTION "The reference value that is used to calculate the link cost. If there is no explicit link cost, OSPF calculates the cost according to the bandwidth of the link (cost = reference value (M)/bandwidth)." DEFVAL { 100 } ::= { hwOspfv2ProcessEntry 5 } hwOspfv2Description OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "The description of the OSPF process." ::= { hwOspfv2ProcessEntry 6 } hwOspfv2LsaArriveIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 0..10000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "To avoid wasting network resources due to network changes, OSPF defines that the interval for receiving LSAs is 1 second. In a stable network, if the fast speed of route convergence is required, you can cancel the interval of receiving LSAs by setting it to 0 seconds. Routers can thus detect changes of topology and route in time. This speeds up route convergence. By default, this object is -1, indicating that an intelligent timer is enabled instead. Note that -1 is not a configurable value. Instead, by set the intelligent timer (hwOspfv2LsaArriveMaxIntvl, hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl) to default value, it will get back to default configuration." DEFVAL { -1 } ::= { hwOspfv2ProcessEntry 7 } hwOspfv2LsaArriveMaxIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..10000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the maximum interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 1000 } ::= { hwOspfv2ProcessEntry 8 } hwOspfv2LsaArriveStartIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 0..1000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the initial interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveStartIntvl is specified, you need also specify hwOspfv2LsaArriveMaxIntvl and hwOspfv2LsaArriveHoldIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 500 } ::= { hwOspfv2ProcessEntry 9 } hwOspfv2LsaArriveHoldIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..5000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Holdtime interval of intelligent-timer for receiving OSPF LSAs. After an intelligent timer is enabled, the interval for receiving LSAs is as follows: The initial interval for receiving LSAs is specified by the parameter start-interval. The interval for receiving LSAs for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF receives LSAs at the maximum interval for three consecutive times. Then, OSPF receives LSAs at the initial interval specified by start-interval. When hwOspfv2LsaArriveHoldIntvl is specified, you need also specify wOspfv2LsaArriveMaxIntvl and hwOspfv2LsaArriveStartIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 500 } ::= { hwOspfv2ProcessEntry 10 } hwOspfv2LsaOrigIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 0) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "To avoid wasting network source due to network changes, OSPF defines that the interval for updating LSAs is 5 seconds. In a stable network, if the speed of route convergence is required to be fast, you can cancel the interval for updating LSAs by setting it to 0 seconds. So, routers can detect changes of topology and route in time. This speeds up route convergence. By default, this object is -1, indicating that an intelligent timer is enabled instead. Note that -1 is not a configurable value. Instead, by set the intelligent timer (hwOspfv2LsaOrigMaxIntvl, hwOspfv2LsaOrigStartIntvl, and hwOspfv2LsaOrigHoldIntvl) to default value, it will get back to default configuration." DEFVAL { -1 } ::= { hwOspfv2ProcessEntry 11 } hwOspfv2LsaOrigMaxIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..10000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the maximum interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigMaxIntvl is specified, you need also specify hwOspfv2LsaOrigStartIntvl and hwOspfv2LsaOrigHoldIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 5000 } ::= { hwOspfv2ProcessEntry 12 } hwOspfv2LsaOrigStartIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 0..1000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the initial interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigStartIntvl is specified, you need also specify hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigHoldIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 500 } ::= { hwOspfv2ProcessEntry 13 } hwOspfv2LsaOrigHoldIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..5000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Holdtime interval of intelligent-timer for updating OSPF LSAs. After an intelligent timer is enabled, the interval for updating LSAs is as follows: The initial interval for updating LSAs is specified by the parameter start-interval. The interval for updating LSAs for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF updates LSAs at the maximum interval for three consecutive times. Then, OSPF updates LSAs at the initial interval specified by start-interval. When hwOspfv2LsaOrigHoldIntvl is specified, you need also specify hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigStartIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 1000 } ::= { hwOspfv2ProcessEntry 14 } hwOspfv2LsaOrigIntvlOtherType OBJECT-TYPE SYNTAX Integer32 (-1 | 0..10) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the interval for updating LSAs, excluding OSPF router LSAs and network LSAs. hwOspfv2LsaOrigIntvlOtherType and hwOspfv2LsaOrigIntvl cannot be specified together. Here -1 indicated that hwOspfv2LsaOrigIntvl is enabled instead. Note that -1 is not a configurable value. Instead, by set this node to default value, it will get back to default configuration. " DEFVAL { 5 } ::= { hwOspfv2ProcessEntry 15 } hwOspfv2LsdbOverflowLimit OBJECT-TYPE SYNTAX Integer32 (0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of external LSAs in OSPF LSDB. When this node is set to 0, it means that no limits exist." DEFVAL { 0 } ::= { hwOspfv2ProcessEntry 16 } hwOspfv2MaxLoadBalaNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of equal-cost routes to a destination in the routing table." DEFVAL { ''b } ::= { hwOspfv2ProcessEntry 17 } hwOspfv2AseRouteMaxNumber OBJECT-TYPE SYNTAX Integer32 (100..5000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of ASE routes that are supported by OSPF." DEFVAL { 5000000 } ::= { hwOspfv2ProcessEntry 18 } hwOspfv2InterRouteMaxNumber OBJECT-TYPE SYNTAX Integer32 (100..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of inter-area routes that are supported by OSPF." DEFVAL { 1000000 } ::= { hwOspfv2ProcessEntry 19 } hwOspfv2IntraRouteMaxNumber OBJECT-TYPE SYNTAX Integer32 (100..100000) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of intra-area routes that are supported by OSPF." DEFVAL { 100000 } ::= { hwOspfv2ProcessEntry 20 } hwOspfv2RetransLimitMaxNumber OBJECT-TYPE SYNTAX Integer32 (0 | 2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum count of retransmission. The value is an integer that ranges from 2 to 255. When the retransmission limit is disabled, the value is set to 0." DEFVAL { 0 } ::= { hwOspfv2ProcessEntry 21 } hwOspfv2Rfc1583Compatibility OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to enable the routing rule for compatible RFC 1583." DEFVAL { true } ::= { hwOspfv2ProcessEntry 22 } hwOspfv2ShamHello OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to enable the sham-hello feature of OSPF. After the feature is enabled, OSPF updates the timeout timer of the neighbor when receiving protocol packets of various types." DEFVAL { false } ::= { hwOspfv2ProcessEntry 23 } hwOspfv2SpfSchIntvlUnit OBJECT-TYPE SYNTAX INTEGER { second(1), millionSecond(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object identifies the interval unit for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalNumber. By default, this object is none, indicating that an intelligent timer is enabled instead. Note that none is not a configurable value. Instead, by set the intelligent timer (hwOspfv2SpfSchMaxIntvl, hwOspfv2SpfSchStartIntvl, and hwOspfv2SpfSchHoldIntvl) to default value, it will get back to default configuration." DEFVAL { none } ::= { hwOspfv2ProcessEntry 24 } hwOspfv2SpfSchIntvlNumber OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object identifies the interval for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalUnit. By default, this object is -1, indicating that an intelligent timer is enabled instead. Note that -1 is not a configurable value. Instead, by set the intelligent timer (hwOspfv2SpfSchMaxIntvl, hwOspfv2SpfSchStartIntvl, and hwOspfv2SpfSchHoldIntvl) to default value, it will get back to default configuration." DEFVAL { -1 } ::= { hwOspfv2ProcessEntry 25 } hwOspfv2SpfSchMaxIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..20000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the maximum interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchMaxIntvl is specified, you need also specify hwOspfv2SpfSchStartIntvl and hwOspfv2SpfSchHoldIntvl, but you cannot specify hwOspfv2SpfSchIntvlUnit or hwOspfv2SpfSchIntvlNumber. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 10000 } ::= { hwOspfv2ProcessEntry 26 } hwOspfv2SpfSchStartIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..1000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the initial interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchStartIntvl is specified, you need also specify hwOspfv2SpfSchMaxIntvl and hwOspfv2SpfSchHoldIntvl, but you cannot specify hwOspfv2SpfSchIntvlUnit or hwOspfv2SpfSchIntvlNumber. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 500 } ::= { hwOspfv2ProcessEntry 27 } hwOspfv2SpfSchHoldIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..5000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Holdtime interval of intelligent timer for OSPF to perform the SPF calculation. After an intelligent timer is enabled, the interval for the SPF calculation is as follows: The initial interval for the SPF calculation is specified by the parameter start-interval. The interval for the SPF calculation for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF performs the SPF calculation at the maximum interval for three consecutive times. Then, OSPF performs the SPF calculation at the initial interval specified by start-interval. When hwOspfv2SpfSchHoldIntvl is specified, you need also specify hwOspfv2SpfSchMaxIntvl and hwOspfv2SpfSchStartIntvl, but you cannot specify hwOspfv2SpfSchIntvlUnit or hwOspfv2SpfSchIntvlNumber. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 1000 } ::= { hwOspfv2ProcessEntry 28 } hwOspfv2OpaqueCapability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to enable opaque-LSAs capability. When the capability is enabled, then the OSPF process can generate opaque LSAs and process the opaque LSAs received from neighbors." DEFVAL { false } ::= { hwOspfv2ProcessEntry 29 } hwOspfv2TrafficAdjustment OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to enable IGP-shortcut feature. The value false means disable. Otherwise, the value true means enable. If you want to set this node to false, please check whether Local MT feature is disabled. When Local MT feature is enabled, this node cannot be set to false." DEFVAL { false } ::= { hwOspfv2ProcessEntry 30 } hwOspfv2TrafficAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to enable IGP-shortcut and Forwarding Adjacency feature." DEFVAL { false } ::= { hwOspfv2ProcessEntry 31 } hwOspfv2FlushTimer OBJECT-TYPE SYNTAX Integer32 (0..40) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the flush timer. When configuring or undoing OSPF process, flush self-originated LSAs first. If the timer expires, stop flushing LSAs, and then reset the process. This timer is one-off. When flushing is finished, it recovers to 0." DEFVAL { 0 } ::= { hwOspfv2ProcessEntry 32 } hwOspfv2ProcessRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new process. If the process is created successfully, the value of this node changes to active." ::= { hwOspfv2ProcessEntry 33 } hwOspfv2AreaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOspfv2AreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the configured parameters of the router's attached OSPF areas." ::= { hwOspfv2MIB 4 } hwOspfv2AreaEntry OBJECT-TYPE SYNTAX HwOspfv2AreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Information describes the configured parameters of the router's attached OSPF areas." INDEX { hwOspfv2ProcessIdIndex, hwOspfv2AreaIdIndex } ::= { hwOspfv2AreaTable 1 } HwOspfv2AreaEntry ::= SEQUENCE { hwOspfv2AreaIdIndex IpAddress, hwOspfv2AreaType INTEGER, hwOspfv2AreaNoSummary TruthValue, hwOspfv2AreaNssaFlushTimer Integer32, hwOspfv2AreaNssaDefAdvertise TruthValue, hwOspfv2AreaNssaNoImportRoute TruthValue, hwOspfv2AreaNssaTransAlways TruthValue, hwOspfv2AreaNssaTransTimer Integer32, hwOspfv2AreaNssaAllowFaZero TruthValue, hwOspfv2AreaNssaSuppressFa TruthValue, hwOspfv2AreaNssaSetNBit TruthValue, hwOspfv2AreaDefCost Integer32, hwOspfv2AreaDescription DisplayString, hwOspfv2AreaFilterExpAcl Integer32, hwOspfv2AreaFilterExpPrefix DisplayString, hwOspfv2AreaFilterExpPolicy DisplayString, hwOspfv2AreaFilterImpAcl Integer32, hwOspfv2AreaFilterImpPrefix DisplayString, hwOspfv2AreaFilterImpPolicy DisplayString, hwOspfv2AreaAuthModeType INTEGER, hwOspfv2AreaAuthPasswordType INTEGER, hwOspfv2AreaAuthKeyId Integer32, hwOspfv2AreaAuthText DisplayString, hwOspfv2AreaMplsTe INTEGER, hwOspfv2AreaAreaRowStatus RowStatus, hwOspfv2AreaFilterExpAclName DisplayString, hwOspfv2AreaFilterImpAclName DisplayString } hwOspfv2AreaIdIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone." ::= { hwOspfv2AreaEntry 1 } hwOspfv2AreaType OBJECT-TYPE SYNTAX INTEGER { nssa(1), stub(2), normal(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the type of area: nssa(1), stub(2), normal(3)." DEFVAL { normal } ::= { hwOspfv2AreaEntry 2 } hwOspfv2AreaNoSummary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to reduce the number of LSAs that are transmitted to the NSSA or Stub area. You can configure this node as an ABR. This also prevents the ABR from transmitting Summary LSA (Type-3 LSA) to the NSSA or Stub area. Note: All nodes about NSSA property (hwOspfv2AreaType, hwOspfv2AreaNoSummary, hwOspfv2AreaNssaFlushTimer, hwOspfv2AreaNssaNoImportRoute, hwOspfv2AreaNssaDefAdvertise, hwOspfv2AreaNssaTransAlways, hwOspfv2AreaNssaTransTimer, hwOspfv2AreaNssaAllowFaZero, hwOspfv2AreaNssaSuppressFa, and hwOspfv2AreaNssaSetNBit) should be set together." DEFVAL { false } ::= { hwOspfv2AreaEntry 3 } hwOspfv2AreaNssaFlushTimer OBJECT-TYPE SYNTAX Integer32 (0..40) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated Type-5 and Type-7 LSAs first. If the timer expires, stop flushing LSAs, and then reset the area. This timer is one-off. When flushing is finished, it recovers to 0. " DEFVAL { 0 } ::= { hwOspfv2AreaEntry 4 } hwOspfv2AreaNssaDefAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it must originate Type-7 LSAs, while for ASBR router only if the route to 0.0.0.0 exists, it should originate Type-7 LSAs." DEFVAL { false } ::= { hwOspfv2AreaEntry 5 } hwOspfv2AreaNssaNoImportRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to decide whether the external route is imported to NSSA area. On ASBR, if this node is set to true, the external route can not be advertised to the NSSA area." DEFVAL { false } ::= { hwOspfv2AreaEntry 6 } hwOspfv2AreaNssaTransAlways OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This node specifies whether or not an NSSA router will unconditionally translate Type-7 LSAs to Type-5 LSAs when acting as an NSSA border router. When hwOspfAreaNssaTranslateAlways is set to true, Type-7 LSAs are always translated regardless of the translator state of other NSSA border routers. When hwOspfAreaNssaTranslateAlways is set to false, an NSSA border router will participate in the translator election process. The router will translate Type-7 LSAs to Type-5 LSAs only after being selected." DEFVAL { false } ::= { hwOspfv2AreaEntry 7 } hwOspfv2AreaNssaTransTimer OBJECT-TYPE SYNTAX Integer32 (0..120) MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to configure translator stability interval. This minimizes excessive flushing of translated Type-7 LSAs and provides a more stable translator transition. If the area type is not NSSA, the default value of the translator stability interval parameter is 0 seconds, and hwOspfv2AreaType is stub(2) or normal(3). If the type of the area is NSSA, the default value of the translator stability interval parameter is 40 seconds, and hwOspfv2AreaType is nssa(1)." DEFVAL { 0 } ::= { hwOspfv2AreaEntry 8 } hwOspfv2AreaNssaAllowFaZero OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the router generates Type-7 LSAs." DEFVAL { false } ::= { hwOspfv2AreaEntry 9 } hwOspfv2AreaNssaSuppressFa OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the ABR translates Type-7 LSAs into Type-5 LSAs." DEFVAL { false } ::= { hwOspfv2AreaEntry 10 } hwOspfv2AreaNssaSetNBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When this node is set to true, N-bit should be set in the option when sending DD packets." DEFVAL { false } ::= { hwOspfv2AreaEntry 11 } hwOspfv2AreaDefCost OBJECT-TYPE SYNTAX Integer32 (-1 | 0..16777214) MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to specify the cost of the default routes that flush to stub area by the ABR. The value ranges from 0 to 16777214. The default value is -1." DEFVAL { -1 } ::= { hwOspfv2AreaEntry 12 } hwOspfv2AreaDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to specify the description of the area." ::= { hwOspfv2AreaEntry 13 } hwOspfv2AreaFilterExpAcl OBJECT-TYPE SYNTAX Integer32 (0 | 2000..2999) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of basic ACL. The ACL number ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAclName, hwOspfv2AreaFilterExpPrefix, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time." DEFVAL { 0 } ::= { hwOspfv2AreaEntry 14 } hwOspfv2AreaFilterExpPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..169)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 15 } hwOspfv2AreaFilterExpPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPrefix. Only one object can be configured each time." DEFVAL { "" } ::= { hwOspfv2AreaEntry 16 } hwOspfv2AreaFilterImpAcl OBJECT-TYPE SYNTAX Integer32 (0 | 2000..2999) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of basic ACL. The value ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAclName, hwOspfv2AreaFilterImpPrefix, and hwOspfv2AreaFilterImpPolicy. Only one object can be configured each time." DEFVAL { 0 } ::= { hwOspfv2AreaEntry 17 } hwOspfv2AreaFilterImpPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..169)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName, and hwOspfv2AreaFilterImpPolicy. Only one node can be configured each time." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 18 } hwOspfv2AreaFilterImpPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName and hwOspfv2AreaFilterImpPrefix. Only one node can be configured each time." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 19 } hwOspfv2AreaAuthModeType OBJECT-TYPE SYNTAX INTEGER { none(1), simple(2), md5(3), hmd5(4), keychain(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3): indicates the md5 cipher mode. hmd5(4): indicates the hmac-md5 cipher mode. keychain(5): indicates the keychain authentication mode. Note: If this value is set to simple(2), you should specify hwOspfv2AreaAuthPasswordType and hwOspfv2AreaAuthText, but cannot specify hwOspfv2AreaAuthKeyId. To configure the simple authentication mode with the authentication key being NULL, set hwOspfv2AreaAuthPasswordType to plainText(2) and set hwOspfv2AreaAuthText to a string of 0 characters. If this value is set to md5(3) or hmd5(4), you can specify hwOspfv2AreaAuthKeyId or not. Once you specify hwOspfv2AreaAuthKeyId, you should specify hwOspfv2AreaAuthPasswordType and hwOspfv2AreaAuthText at the same time. If this value is set to keychain(5), you should specify it and hwOspfv2AreaAuthText together, but should not specify hwOspfv2AreaAuthKeyId and hwOspfv2AreaAuthPasswordType." DEFVAL { none } ::= { hwOspfv2AreaEntry 20 } hwOspfv2AreaAuthPasswordType OBJECT-TYPE SYNTAX INTEGER { none(1), plainText(2), cipherText(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the type of area authentication key. plaintext(2): If this node is set to plaintext(2), you can specify only the plain text authentication key on the node hwOspfAreaAuthText. When viewing the configuration file, display the password in plain mode. ciphertext(3): If this node is set to ciphertext(3), you can specify the cipher text authentication key or cipher text authentication key in node hwOspfv2AreaAuthText. When viewing the configuration file, display the password in cipher mode. Note: If you set this node to plaintext(2) or ciphertext(3), you should set the node hwOspfv2AreaAuthText at the same time." DEFVAL { none } ::= { hwOspfv2AreaEntry 21 } hwOspfv2AreaAuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode. The value of the ID is an integer that ranges from 1 to 255. The default value 0 means no configuration." DEFVAL { 0 } ::= { hwOspfv2AreaEntry 22 } hwOspfv2AreaAuthText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "In simple authentication, this object indicates the authentication key. It's a string of 1 to 8 characters in plain text or 24 characters in cipher text. In MD5 or HMAC-MD5 authentication, this object also indicates the authentication key. It's a string of 1 to 255 characters in plain text or 20 to 392 characters in cipher text. In keychain authentication, this object indicates the keychain name. It's a string of 1 to 47 characters. When read, hwOspfv2AreaAuthText always returns an octet string of length zero." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 23 } hwOspfv2AreaMplsTe OBJECT-TYPE SYNTAX INTEGER { disable(1), stdEnable(2), stdDisable(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The node is used to enable the MPLS-TE capability. disable(1): no configuration. stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected if it has more than one Top level TLV. stdDisable(3): accepts the LSAs not in the standard format." DEFVAL { disable } ::= { hwOspfv2AreaEntry 24 } hwOspfv2AreaAreaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new area. If the area is created successfully, the value of this node changes to active." ::= { hwOspfv2AreaEntry 25 } hwOspfv2AreaFilterExpAclName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpPrefix, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 26 } hwOspfv2AreaFilterImpAclName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpPrefix, and hwOspfv2AreaFilterImpPolicy. Only one object can be configured each time." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 27 } hwOspfv2NetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOspfv2NetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the configured parameters of the router's attached OSPF networks." ::= { hwOspfv2MIB 5 } hwOspfv2NetworkEntry OBJECT-TYPE SYNTAX HwOspfv2NetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the configured parameters of the router's attached OSPF networks." INDEX { hwOspfv2ProcessIdIndex, hwOspfv2AreaIdIndex, hwOspfv2NetworkIpAddrIndex, hwOspfv2NetworkIpMaskIndex } ::= { hwOspfv2NetworkTable 1 } HwOspfv2NetworkEntry ::= SEQUENCE { hwOspfv2NetworkIpAddrIndex IpAddress, hwOspfv2NetworkIpMaskIndex IpAddress, hwOspfv2NetworkRowStatus RowStatus } hwOspfv2NetworkIpAddrIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network IP address: specifies the address of the network segment where the interface resides." ::= { hwOspfv2NetworkEntry 1 } hwOspfv2NetworkIpMaskIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network IP mask: specifies the wildcard mask of an IP address, which is similar to the reversed form of the mask of an IP address. '1' represents that the corresponding bit in the IP address is ignored and '0' represents that this bit must be reserved." ::= { hwOspfv2NetworkEntry 2 } hwOspfv2NetworkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new network. If the network is created successfully, the value of this node changes to active." ::= { hwOspfv2NetworkEntry 3 } hwOspfv2NeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOspfv2NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the configured parameters of the OSPF neighbors attached to the router." ::= { hwOspfv2MIB 6 } hwOspfv2NeighborEntry OBJECT-TYPE SYNTAX HwOspfv2NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the configured parameters of the OSPF neighbors attached to the router." INDEX { hwOspfv2ProcessIdIndex, hwOspfv2AreaIdIndex, hwOspfv2SelfIfnetIndex, hwOspfv2NbrIpAddrIndex } ::= { hwOspfv2NeighborTable 1 } HwOspfv2NeighborEntry ::= SEQUENCE { hwOspfv2SelfIfnetIndex Integer32, hwOspfv2NbrIpAddrIndex IpAddress, hwOspfv2SelfRouterId IpAddress, hwOspfv2SelfIfIpAddress IpAddress, hwOspfv2SelfIfName DisplayString, hwOspfv2NbrIfDesignatedRouter IpAddress, hwOspfv2NbrIfBackupDesignatedRouter IpAddress, hwOspfv2NbrIfMtu Integer32, hwOspfv2NbrRouterId IpAddress, hwOspfv2NbrState INTEGER, hwOspfv2NbrMode INTEGER, hwOspfv2NbrPriority Integer32, hwOspfv2NbrUpTime Unsigned32, hwOspfv2NbrAuthSequence Unsigned32, hwOspfv2NbrDeadTimeLeft Gauge32, hwOspfv2NbrGrStatus INTEGER } hwOspfv2SelfIfnetIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the unique value for each interface." ::= { hwOspfv2NeighborEntry 1 } hwOspfv2NbrIpAddrIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the OSPF neighbor." ::= { hwOspfv2NeighborEntry 2 } hwOspfv2SelfRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the router ID of itself." ::= { hwOspfv2NeighborEntry 3 } hwOspfv2SelfIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address of the OSPF interface associated with this neighbor." ::= { hwOspfv2NeighborEntry 4 } hwOspfv2SelfIfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the OSPF interface associated with this neighbor." ::= { hwOspfv2NeighborEntry 5 } hwOspfv2NbrIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address of the designated router that is obtained from the DD packets from this neighbor. By default, the value is '00000000'H." ::= { hwOspfv2NeighborEntry 6 } hwOspfv2NbrIfBackupDesignatedRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address of the backup designated router which is obtained from the DD packets from this neighbor. By default, the value is '00000000'H." ::= { hwOspfv2NeighborEntry 7 } hwOspfv2NbrIfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the size of the largest IP datagram that can be sent out the sending interface without fragmentation. It is obtained from the DD packets from this neighbor. By default, the value is 0. The MTU of the interface should be set to 0 in the DD packets when the MTU is not enabled on the OSPF interface." ::= { hwOspfv2NeighborEntry 8 } hwOspfv2NbrRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the router ID of this neighbor." ::= { hwOspfv2NeighborEntry 9 } hwOspfv2NbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the state of the relationship with this neighbor. By default, the state is down." ::= { hwOspfv2NeighborEntry 10 } hwOspfv2NbrMode OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether this neighbor is master or slave through the DD negotiation." ::= { hwOspfv2NeighborEntry 11 } hwOspfv2NbrPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. By default, the value is 1." ::= { hwOspfv2NeighborEntry 12 } hwOspfv2NbrUpTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time (in seconds) since the state of this neighbor has been full." ::= { hwOspfv2NeighborEntry 13 } hwOspfv2NbrAuthSequence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the unsigned 32-bit non-decreasing sequence number. Used to guard against replay attacks. By default, the value is 0." ::= { hwOspfv2NeighborEntry 14 } hwOspfv2NbrDeadTimeLeft OBJECT-TYPE SYNTAX Gauge32 (0..235926000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the period (in seconds) after which this neighbor is declared dead." ::= { hwOspfv2NeighborEntry 15 } hwOspfv2NbrGrStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), doingGR(2), helper(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the neighbor performs GR or functions as a GR helper. By default, the state is normal." ::= { hwOspfv2NeighborEntry 16 } hwOspfv2InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOspfv2InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Interface Table describes the interfaces from the viewpoint of OSPF." ::= { hwOspfv2MIB 7 } hwOspfv2InterfaceEntry OBJECT-TYPE SYNTAX HwOspfv2InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the configured parameters of the OSPF interfaces." INDEX { hwOspfv2ProcessIdIndex, hwOspfv2AreaIdIndex, hwOspfv2InterfaceIndex } ::= { hwOspfv2InterfaceTable 1 } HwOspfv2InterfaceEntry ::= SEQUENCE { hwOspfv2InterfaceIndex Integer32, hwOspfv2InterfaceName DisplayString } hwOspfv2InterfaceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for each interface." ::= { hwOspfv2InterfaceEntry 1 } hwOspfv2InterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the OSPF interface." ::= { hwOspfv2InterfaceEntry 2 } hwOspfv2TrapsObjects OBJECT IDENTIFIER ::= { hwOspfv2MIB 30 } hwOspfv2NbrChgReason OBJECT-TYPE SYNTAX INTEGER { adjacencyHoldTimerExpired(1), physicalInterfaceChange(2), ospfProtocolReason(3), bfdSessionStateChange(4), configureChange(5), peerRouterReason(6), waitingForEstablishingNeighbor(7), alarmCleared(100) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason of the OSPF neighbor state change." ::= { hwOspfv2TrapsObjects 1 } hwOspfv2IfChgReason OBJECT-TYPE SYNTAX INTEGER { configureChange(1), physicalInterfaceChange(2), alarmCleared(100) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason of the OSPF interface state change." ::= { hwOspfv2TrapsObjects 2 } hwOspfv2Traps OBJECT IDENTIFIER ::= { hwOspfv2MIB 31 } hwOspfV2NeighborUnavailable NOTIFICATION-TYPE OBJECTS { ospfRouterId, ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, hwOspfv2SelfIfName, hwOspfv2VpnName, hwOspfv2NbrChgReason } STATUS current DESCRIPTION "These objects are used to monitor/manage changed OSPF neighbor alarm parameters." ::= { hwOspfv2Traps 1 } hwOspfV2NeighborUnavailableClear NOTIFICATION-TYPE OBJECTS { ospfRouterId, ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, hwOspfv2SelfIfName, hwOspfv2VpnName, hwOspfv2NbrChgReason } STATUS current DESCRIPTION "These objects are used to monitor/manage changed OSPF neighbor clear alarm parameters." ::= { hwOspfv2Traps 2 } hwOspfv2Conformance OBJECT IDENTIFIER ::= { hwOspfv2MIB 32 } hwOspfv2Compliances OBJECT IDENTIFIER ::= { hwOspfv2Conformance 1 } -- this module hwOspfv2ModuleFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities implementing the Huawei OSPF MIB" MODULE -- this module MANDATORY-GROUPS { hwOspfv2MIBObjectsGroup, hwOspfv2AreaGroup, hwOspfv2NetworkGroup, hwOspfv2NeighborGroup } ::= { hwOspfv2Compliances 1 } hwOspfv2Groups OBJECT IDENTIFIER ::= { hwOspfv2Conformance 2 } hwOspfv2MIBObjectsGroup OBJECT-GROUP OBJECTS { hwOspfv2MIBBinding } STATUS current DESCRIPTION "These objects are used to monitor/manage OSPF general parameters." ::= { hwOspfv2Groups 1 } hwOspfv2ProcessGroup OBJECT-GROUP OBJECTS { hwOspfv2VpnName, hwOspfv2ConfigRouterId, hwOspfv2ActualRouterId, hwOspfv2BandwidthReference, hwOspfv2Description, hwOspfv2LsdbOverflowLimit, hwOspfv2MaxLoadBalaNumber, hwOspfv2AseRouteMaxNumber, hwOspfv2InterRouteMaxNumber, hwOspfv2IntraRouteMaxNumber, hwOspfv2RetransLimitMaxNumber, hwOspfv2Rfc1583Compatibility, hwOspfv2ShamHello, hwOspfv2OpaqueCapability, hwOspfv2TrafficAdjustment, hwOspfv2TrafficAdvertise, hwOspfv2FlushTimer, hwOspfv2SpfSchHoldIntvl, hwOspfv2SpfSchStartIntvl, hwOspfv2SpfSchMaxIntvl, hwOspfv2LsaOrigIntvlOtherType, hwOspfv2LsaOrigHoldIntvl, hwOspfv2LsaOrigStartIntvl, hwOspfv2LsaOrigMaxIntvl, hwOspfv2LsaArriveHoldIntvl, hwOspfv2LsaArriveStartIntvl, hwOspfv2LsaArriveMaxIntvl, hwOspfv2LsaArriveIntvl, hwOspfv2SpfSchIntvlUnit, hwOspfv2SpfSchIntvlNumber, hwOspfv2LsaOrigIntvl, hwOspfv2ProcessRowStatus } STATUS current DESCRIPTION "These objects are used to monitor/manage OSPF process parameters." ::= { hwOspfv2Groups 2 } hwOspfv2AreaGroup OBJECT-GROUP OBJECTS { hwOspfv2AreaType, hwOspfv2AreaNoSummary, hwOspfv2AreaNssaFlushTimer, hwOspfv2AreaNssaDefAdvertise, hwOspfv2AreaNssaNoImportRoute, hwOspfv2AreaNssaTransAlways, hwOspfv2AreaNssaTransTimer, hwOspfv2AreaNssaAllowFaZero, hwOspfv2AreaNssaSuppressFa, hwOspfv2AreaNssaSetNBit, hwOspfv2AreaDefCost, hwOspfv2AreaDescription, hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpPrefix, hwOspfv2AreaFilterExpPolicy, hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpPrefix, hwOspfv2AreaFilterImpPolicy, hwOspfv2AreaAuthModeType, hwOspfv2AreaAuthPasswordType, hwOspfv2AreaAuthKeyId, hwOspfv2AreaAuthText, hwOspfv2AreaMplsTe, hwOspfv2AreaAreaRowStatus, hwOspfv2AreaFilterExpAclName, hwOspfv2AreaFilterImpAclName } STATUS current DESCRIPTION "These objects are used to monitor/manage OSPF area parameters." ::= { hwOspfv2Groups 4 } hwOspfv2NetworkGroup OBJECT-GROUP OBJECTS { hwOspfv2NetworkRowStatus } STATUS current DESCRIPTION "These objects are used to monitor/manage OSPF network parameters." ::= { hwOspfv2Groups 5 } hwOspfv2NeighborGroup OBJECT-GROUP OBJECTS { hwOspfv2SelfRouterId, hwOspfv2SelfIfIpAddress, hwOspfv2SelfIfName, hwOspfv2NbrIfDesignatedRouter, hwOspfv2NbrIfBackupDesignatedRouter, hwOspfv2NbrIfMtu, hwOspfv2NbrRouterId, hwOspfv2NbrState, hwOspfv2NbrMode, hwOspfv2NbrPriority, hwOspfv2NbrUpTime, hwOspfv2NbrAuthSequence, hwOspfv2NbrDeadTimeLeft, hwOspfv2NbrGrStatus } STATUS current DESCRIPTION "These objects are used to monitor/manage changed OSPF neighbor parameters" ::= { hwOspfv2Groups 6 } hwOspfv2ChangeGroup OBJECT-GROUP OBJECTS { hwOspfv2MIBObjectsChange, hwOspfv2ProcessChange, hwOspfv2AreaChange, hwOspfv2NetworkChange } STATUS current DESCRIPTION "These objects are used to monitor/manage changed OSPF table parameters" ::= { hwOspfv2Groups 7 } hwOspfTrapEventGroup NOTIFICATION-GROUP NOTIFICATIONS { hwOspfV2NeighborUnavailable, hwOspfV2NeighborUnavailableClear } STATUS current DESCRIPTION "These objects are used to monitor/manage changed OSPF neighbor parameters." ::= { hwOspfv2Groups 8 } hwOspfv2TrapsObjectsGroup OBJECT-GROUP OBJECTS { hwOspfv2NbrChgReason, hwOspfv2IfChgReason } STATUS current DESCRIPTION "The objects are used to monitor/manage the neighbor state change from full to others." ::= { hwOspfv2Groups 9 } hwOspfv2InterfaceGroup OBJECT-GROUP OBJECTS { hwOspfv2InterfaceName } STATUS current DESCRIPTION "These objects are used to monitor/manage changed OSPF interface parameters." ::= { hwOspfv2Groups 10 } END -- -- HUAWEI-OSPFV2-MIB.mib --