-- ================================================================== -- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI LAN Switch RRPP MIB -- Reference: -- Version: V1.9 -- Revision history: -- REVISION "201001190000Z" -- DESCRIPTION "V1.9, add hwRrppSnoopingAllVsiStatus leaf node for the rrpp snooping all-vsi function" -- V1.0 2006-02-20 Created by Gurongwei 50539 -- V1.1 2006-06-07 Modify by xingxing 51692 -- V1.2 2006-07-07 Modify by zhouyun 60016423 -- V1.3 2006-09-11 Modify by zhouyun 60016423 -- V1.4 2006-12-29 Modify by zhouyun 60016423 -- V1.5 2007-8-2 Modify by jianglian 60019048 -- 2008-6-5 Modify by yanjiajun 130005 -- 2008-9-27 Modify by ruiping 36753 -- v1.8 2009-09-28 Modify by x00109707 -- 2010-08-10 Modify by wushengwei 00101032 -- ================================================================== HUAWEI-RRPP-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC InterfaceIndex , ifName FROM IF-MIB VlanId FROM Q-BRIDGE-MIB; hwRrpp MODULE-IDENTITY LAST-UPDATED "200607130000Z" ORGANIZATION "Huawei Technologies Co. Ltd." CONTACT-INFO "Platform Team Huawei Technologies Co. Ltd. Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085" DESCRIPTION "The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in the ring breaks, the RRPP can recover the data path quickly. Its protection switching is similar to what can be achieved with the Spanning Tree Protocol (STP), but the converging time is less than a second after link failure. This MIB defines management information used on products which support RRPP." ::= { hwDatacomm 113 } EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } hwRrppScalarGroup OBJECT IDENTIFIER ::= { hwRrpp 1 } hwRrppEnableStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicating whether the RRPP is enabled on this switch." ::= { hwRrppScalarGroup 1 } hwRrppLinkupDelayTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the delay when ports change to Up. The value of this node ranges with products. The default value is 0." ::= { hwRrppScalarGroup 2 } hwRrppTables OBJECT IDENTIFIER ::= { hwRrpp 2 } hwRrppDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about configurations and status of a RRPP domain." ::= { hwRrppTables 1 } hwRrppDomainEntry OBJECT-TYPE SYNTAX HwRrppDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information of a specified RRPP domain." INDEX { hwRrppDomainID } ::= { hwRrppDomainTable 1 } HwRrppDomainEntry ::= SEQUENCE { hwRrppDomainID Integer32, hwRrppDomainControlVlanID Integer32, hwRrppDomainProtectedVlan OCTET STRING, hwRrppDomainHelloTime Integer32, hwRrppDomainFailTime Integer32, hwRrppDomainRowStatus RowStatus, hwRrppDomainResetStatistics INTEGER, hwRrppMulSubRingProtection EnabledStatus } hwRrppDomainID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely identifies a RRPP domain. This value can't be modified after created." ::= { hwRrppDomainEntry 1 } hwRrppDomainControlVlanID OBJECT-TYPE SYNTAX Integer32 (1..4093 | 65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Index of the control VLAN specified to a domain. The value 65535 indicates the control VLAN has not been configured. The VLAN assigned to a RRPP Domain must not have been created. This value can't be modified after created." DEFVAL { 65535 } ::= { hwRrppDomainEntry 2 } hwRrppDomainHelloTime OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The value indicates the interval between two hello packets sent by master-node, and its unit is second. The value ranges from 1s~10s." DEFVAL { 1 } ::= { hwRrppDomainEntry 3 } hwRrppDomainFailTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The expiration value of the fail-period timer and its unit is second. If not receiving hello packets before this expires, the master-node considers the ring is broken. The value of this node ranges with products, which must not be less than triple hwRrppDomainHelloTime's value." ::= { hwRrppDomainEntry 4 } hwRrppDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation." ::= { hwRrppDomainEntry 5 } hwRrppDomainResetStatistics OBJECT-TYPE SYNTAX INTEGER { cleared(1), unused(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Clears the statistics of packets received and sent on the current domain." ::= { hwRrppDomainEntry 6 } hwRrppMulSubRingProtection OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicating whether the rrpp mul-sub-ring protection is enabled on this switch." ::= { hwRrppDomainEntry 7 } hwRrppDomainProtectedVlan OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "Information about the instances bound to a domain. The value ranges from 0 to 48. Both the ID and the number of the instances can be obtained through the value." ::= { hwRrppDomainEntry 8 } hwRrppRingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about configurations and status of a RRPP Ring." ::= { hwRrppTables 2 } hwRrppRingEntry OBJECT-TYPE SYNTAX HwRrppRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information of a specified RRPP Ring." INDEX { hwRrppDomainID, hwRrppRingID } ::= { hwRrppRingTable 1 } HwRrppRingEntry ::= SEQUENCE { hwRrppRingID Integer32, hwRrppRingEnableStatus EnabledStatus, hwRrppRingActive INTEGER, hwRrppRingState INTEGER, hwRrppRingNodeMode INTEGER, hwRrppRingPrimaryPort InterfaceIndex, hwRrppRingSecondaryPort InterfaceIndex, hwRrppRingLevel INTEGER, hwRrppRingRowStatus RowStatus, hwRrppRingResetStatistics INTEGER } hwRrppRingID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely identifies a RRPP Ring. This value can't be modified after created." ::= { hwRrppRingEntry 1 } hwRrppRingEnableStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicating whether the RRPP is enabled on this Ring. NOTE: If major-ring and sub-ring(s) of a domain coexist on a switch, major-ring must be enabled before sub-ring is enabled. And sub-ring must be disabled before major-ring is disabled." ::= { hwRrppRingEntry 2 } hwRrppRingActive OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "As both hwRrppEnableStatus and hwRrppRingEnableStatus are enabled, the ring is activated. Whereas either of the two items is disabled, the ring is inactive." ::= { hwRrppRingEntry 3 } hwRrppRingState OBJECT-TYPE SYNTAX INTEGER { unknown(1), health(2), fault(3), complete(4), failed(5), linkup(6), linkdown(7), preforwarding(8), linkupnotify(9), linkdownnotify(10), preforwardnotify(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status (i.e. unknown, health or fault) of the Ethernet ring." ::= { hwRrppRingEntry 4 } hwRrppRingNodeMode OBJECT-TYPE SYNTAX INTEGER { master(1), transit(2), edge(3), assistantEdge(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "There are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-node. All other nodes except edge-node and assistant-edge-node on that ring are referred to as transit-nodes. The node mode of edge and assistant-edge should be configured only on sub-ring. When there is a common link between a sub-ring and its major-ring, the node mode of the sub-ring must be edge or assistant-edge, and they must be configured in pairs. If node mode is designated as edge or assistant-edge, several points should be noticed: Major-ring must be created before a sub-ring is created; Major-ring can't be deleted unless all its sub-rings are deleted; The node mode of the switch on major-ring must be transit; Major-ring and sub-ring must have only a common port. This value can't be modified after created." ::= { hwRrppRingEntry 5 } hwRrppRingPrimaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "If the switch is a master-node or transit-node, this value is ifIndex of the primary port; otherwise, if the switch is an edge-node or assistant-edge-node, this value is ifIndex of the common port. This value is 0, if the port doesn't exist. This value can't be modified after created." ::= { hwRrppRingEntry 6 } hwRrppRingSecondaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "If the switch is a master-node or transit-node, this value is ifIndex of the secondary port; otherwise, if the switch is an edge-node or assistant-edge-node, this value is ifIndex of the edge port. This value is 0, if the port doesn't exist. This value can't be modified after created." ::= { hwRrppRingEntry 7 } hwRrppRingLevel OBJECT-TYPE SYNTAX INTEGER { majorRing(0), subRing(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Level of a ring. This field should be set 0 on major-ring and 1 on the sub-ring. This value can't be modified after created." ::= { hwRrppRingEntry 8 } hwRrppRingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hwRrppRingNodeMode, hwRrppRingPrimaryPort, hwRrppRingSecondaryPort and hwRrppRingLevel must be specified." ::= { hwRrppRingEntry 9 } hwRrppRingResetStatistics OBJECT-TYPE SYNTAX INTEGER { cleared(1), unused(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Clears the statistics of packets received and sent on the current ring." ::= { hwRrppRingEntry 10 } hwRrppPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about configurations and status of a RRPP port." ::= { hwRrppTables 3 } hwRrppPortEntry OBJECT-TYPE SYNTAX HwRrppPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information of a specified RRPP port." INDEX { hwRrppDomainID, hwRrppRingID, hwRrppPortID } ::= { hwRrppPortTable 1 } HwRrppPortEntry ::= SEQUENCE { hwRrppPortID InterfaceIndex, hwRrppPortType INTEGER, hwRrppPortRole INTEGER, hwRrppPortState INTEGER, hwRrppPortRXError Counter32, hwRrppPortRXHello Counter32, hwRrppPortRXLinkUp Counter32, hwRrppPortRXLinkDown Counter32, hwRrppPortRXCommonFlush Counter32, hwRrppPortRXCompleteFlush Counter32, hwRrppPortRXEdgeHello Counter32, hwRrppPortRXMajorFault Counter32, hwRrppPortTXError Counter32, hwRrppPortTXHello Counter32, hwRrppPortTXLinkUp Counter32, hwRrppPortTXLinkDown Counter32, hwRrppPortTXCommonFlush Counter32, hwRrppPortTXCompleteFlush Counter32, hwRrppPortTXEdgeHello Counter32, hwRrppPortTXMajorFault Counter32 } hwRrppPortID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical index of the interface index." ::= { hwRrppPortEntry 1 } hwRrppPortType OBJECT-TYPE SYNTAX INTEGER { fe(1), ge(2), ve(3), ethtrunk(4), xge(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface type of the RRPP port. (i.e. FE, GE, VE, Eth-Trunk or XGE port)." ::= { hwRrppPortEntry 2 } hwRrppPortRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), common(3), edge(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The RRPP role of the port. (i.e. primary, secondary, common or edge port)." ::= { hwRrppPortEntry 3 } hwRrppPortState OBJECT-TYPE SYNTAX INTEGER { unknown(1), unblocked(2), blocked(3), down(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of RRPP port, including unknown, unblocked, blocked and down." ::= { hwRrppPortEntry 4 } hwRrppPortRXError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of illegal RRPP packets received from this port." ::= { hwRrppPortEntry 5 } hwRrppPortRXHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of hello packets received from this port on specified ring." ::= { hwRrppPortEntry 6 } hwRrppPortRXLinkUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of link-up packets received from this port on specified ring." ::= { hwRrppPortEntry 7 } hwRrppPortRXLinkDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of link-down packets received from this port on specified ring." ::= { hwRrppPortEntry 8 } hwRrppPortRXCommonFlush OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of common-flush packets received from this port on specified ring. Instruction When master-node receives valid link-down packets or link-up packets, it will send common-flush packets, instructing the other nodes on the ring to flush their forwarding database. When the nodes except master-node receive common-flush, they will flush forwarding database. If there is any port blocked on that node, it won't be unblocked." ::= { hwRrppPortEntry 9 } hwRrppPortRXCompleteFlush OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of complete-flush packets received from this port on specified ring. Instruction When the ring recovers, master-node will receive its own hello packets. It will send complete-flush packets, instructing the other nodes on the ring to flush their forwarding database. When the nodes except master-node receive complete-flush, they will flush forwarding database. If there is any port blocked on that node, it will be unblocked." ::= { hwRrppPortEntry 10 } hwRrppPortRXEdgeHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of edge-hello packets received from this port on specified ring. Instruction When edge-node sends edge-hello packets, assistantEdge-node will receive its own edge-hello packets from the common link and the master ring." ::= { hwRrppPortEntry 11 } hwRrppPortRXMajorFault OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of major-fault packets received from this port on specified ring. Instruction When assistantEdge can't receive edge-hello packets in the specified fault-time, assistantEdge-node will send its own major-fault packets from the edge port around the sub ring. Edge-node will receive the major-fault packets from its edge port. Then Edge-node will block its edge port." ::= { hwRrppPortEntry 12 } hwRrppPortTXError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of RRPP packets failed to send out of this port." ::= { hwRrppPortEntry 13 } hwRrppPortTXHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of hello packets sent from this port on specified ring." ::= { hwRrppPortEntry 14 } hwRrppPortTXLinkUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of link-up packets sent from this port on specified ring." ::= { hwRrppPortEntry 15 } hwRrppPortTXLinkDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of link-down packets sent from this port on specified ring." ::= { hwRrppPortEntry 16 } hwRrppPortTXCommonFlush OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of common-flush packets sent from this port on specified ring." ::= { hwRrppPortEntry 17 } hwRrppPortTXCompleteFlush OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of complete-flush packets sent from this port on specified ring." ::= { hwRrppPortEntry 18 } hwRrppPortTXEdgeHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of edge-hello packets sent from this port on specified ring." ::= { hwRrppPortEntry 19 } hwRrppPortTXMajorFault OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of major-fault packets sent from this port on specified ring." ::= { hwRrppPortEntry 20 } hwRrppTrackInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HWRrppTrackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about tracking port." ::= { hwRrppTables 4 } hwRrppTrackInterfaceEntry OBJECT-TYPE SYNTAX HWRrppTrackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information of a specified RRPP track interface." INDEX { hwRrppDomainID, hwRrppRingID, hwRrppTrackInterfaceID } ::= { hwRrppTrackInterfaceTable 1 } HWRrppTrackInterfaceEntry ::= SEQUENCE { hwRrppTrackInterfaceID InterfaceIndex, hwRrppTrackRowStatus RowStatus } hwRrppTrackInterfaceID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical index of track interface." ::= { hwRrppTrackInterfaceEntry 1 } hwRrppTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation." ::= { hwRrppTrackInterfaceEntry 2 } hwRrppRingGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppRingGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about an RRPP ring group and created without the domain or ring." ::= { hwRrppTables 5 } hwRrppRingGroupEntry OBJECT-TYPE SYNTAX HwRrppRingGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information about a specified RRPP ring group." INDEX { hwRrppRingGroupID } ::= { hwRrppRingGroupTable 1 } HwRrppRingGroupEntry ::= SEQUENCE { hwRrppRingGroupID Integer32, hwRrppRingGroupRowStatus RowStatus } hwRrppRingGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "index of the RRPP ring group. This value can't be modified after created." ::= { hwRrppRingGroupEntry 1 } hwRrppRingGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in the ring group configuration table. hwRrppRingGroupID must be specified to create a row." ::= { hwRrppRingGroupEntry 2 } hwRrppRingGroupMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppRingGroupMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the configurations and status of an RRPP ring." ::= { hwRrppTables 6 } hwRrppRingGroupMemberEntry OBJECT-TYPE SYNTAX HwRrppRingGroupMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information about a specified RRPP ring group." INDEX { hwRrppRingGroupID, hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID } ::= { hwRrppRingGroupMemberTable 1 } HwRrppRingGroupMemberEntry ::= SEQUENCE { hwRrppRingGroupMemberDomainID Integer32, hwRrppRingGroupMemberRingID Integer32, hwRrppRingGroupIsEdgeHelloProcess EnabledStatus, hwRrppRingGroupMemberRowStatus RowStatus } hwRrppRingGroupMemberDomainID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index, namely, domain ID of the members of a ring group. This value cannot be modified after created." ::= { hwRrppRingGroupMemberEntry 1 } hwRrppRingGroupMemberRingID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index, namely, ring ID of the members of a ring group. This value cannot be modified after created." ::= { hwRrppRingGroupMemberEntry 2 } hwRrppRingGroupIsEdgeHelloProcess OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Flag carried in the sent edge-Hello Packet." ::= { hwRrppRingGroupMemberEntry 3 } hwRrppRingGroupMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in the ring group configuration table. hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID, and hwRrppRingGroupIsEdgeHelloSender must be specified to create a row." ::= { hwRrppRingGroupMemberEntry 4 } hwRrppSnoopingTable OBJECT IDENTIFIER ::= { hwRrpp 3 } hwRrppSnoopingInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppSnoopingInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about RRPP snooping enable interface." ::= { hwRrppSnoopingTable 1 } hwRrppSnoopingInterfaceEntry OBJECT-TYPE SYNTAX HwRrppSnoopingInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information of a specified RRPP snooping enable interface." INDEX { hwRrppSnoopingInterfaceId } ::= { hwRrppSnoopingInterfaceTable 1 } HwRrppSnoopingInterfaceEntry ::= SEQUENCE { hwRrppSnoopingInterfaceId InterfaceIndex, hwRrppSnoopingVsiName OCTET STRING, hwRrppSnoopingVlanId VlanId, hwRrppSnoopingEnableStatus EnabledStatus, hwRrppSnoopingRowStatus RowStatus, hwRrppSnoopingAllVsiStatus EnabledStatus } hwRrppSnoopingInterfaceId OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical index of the interface index." ::= { hwRrppSnoopingInterfaceEntry 1 } hwRrppSnoopingVsiName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of VSI which the interface was binding to." ::= { hwRrppSnoopingInterfaceEntry 2 } hwRrppSnoopingVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN which the intertace added to." ::= { hwRrppSnoopingInterfaceEntry 3 } hwRrppSnoopingEnableStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicating whether the RRPP snooping is enabled on this switch." ::= { hwRrppSnoopingInterfaceEntry 4 } hwRrppSnoopingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation." ::= { hwRrppSnoopingInterfaceEntry 5 } hwRrppSnoopingAllVsiStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicating whether the RRPP snooping is associating all vsi on this switch. Options: 1. enabled(1) -indicates that the RRPP snooping is associated with all vsi under the same main interface 2. disabled(2)-indicates that the RRPP snooping doesn't perform the command to associated with all vsi under the same main interface Default: disabled " ::= { hwRrppSnoopingInterfaceEntry 6 } hwRrppSnoopingVsiTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRrppSnoopingVsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about RRPP snooping relating interface." ::= { hwRrppSnoopingTable 2 } hwRrppSnoopingVsiEntry OBJECT-TYPE SYNTAX HwRrppSnoopingVsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Detailed information of a specified RRPP snooping relating interface." INDEX { hwRrppSnoopingVsiInterfaceId, hwVsiName} ::= { hwRrppSnoopingVsiTable 1 } HwRrppSnoopingVsiEntry ::= SEQUENCE { hwRrppSnoopingVsiInterfaceId InterfaceIndex, hwVsiName OCTET STRING, hwRrppSnoopingVsiRowStatus RowStatus } hwRrppSnoopingVsiInterfaceId OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical index of the interface index." ::= { hwRrppSnoopingVsiEntry 1 } hwVsiName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of VSI." ::= { hwRrppSnoopingVsiEntry 2 } hwRrppSnoopingVsiRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation." ::= { hwRrppSnoopingVsiEntry 3 } hwRrppNotifications OBJECT IDENTIFIER ::= { hwRrpp 4 } hwRrppRingRecover NOTIFICATION-TYPE OBJECTS { hwRrppRingState } STATUS current DESCRIPTION "Trap message is generated by master-node on the ring when the ring recovers from fault." ::= { hwRrppNotifications 1 } hwRrppRingFail NOTIFICATION-TYPE OBJECTS { hwRrppRingState } STATUS current DESCRIPTION "Trap message is generated by master-node on the ring when the ring fails." ::= { hwRrppNotifications 2 } hwRrppMultiMaster NOTIFICATION-TYPE OBJECTS { hwRrppRingNodeMode } STATUS current DESCRIPTION "Trap message is generated by master-node when it detects there are more than one master-node on the ring." ::= { hwRrppNotifications 3 } hwRrppTrackInterfaceDown NOTIFICATION-TYPE OBJECTS { hwRrppTrackRowStatus, ifName } STATUS current DESCRIPTION "Trap message is generated by RRPP node when the track interface tracked BFD down." ::= { hwRrppNotifications 4 } hwRrppTrackInterfaceUp NOTIFICATION-TYPE OBJECTS { hwRrppTrackRowStatus, ifName } STATUS current DESCRIPTION "Trap message is generated by RRPP node when the track interface tracked BFD up." ::= { hwRrppNotifications 5 } hwRrppMibGroup OBJECT IDENTIFIER ::= { hwRrpp 5 } hwRrppGlobalGroup OBJECT-GROUP OBJECTS { hwRrppEnableStatus, hwRrppLinkupDelayTime } STATUS current DESCRIPTION "The RRPP global group." ::= { hwRrppMibGroup 1 } hwRrppDomainGroup OBJECT-GROUP OBJECTS { hwRrppDomainControlVlanID,hwRrppDomainHelloTime, hwRrppDomainFailTime, hwRrppDomainRowStatus,hwRrppDomainResetStatistics, hwRrppMulSubRingProtection, hwRrppDomainProtectedVlan } STATUS current DESCRIPTION "The RRPP domain group." ::= { hwRrppMibGroup 2 } hwRrppRingGroup OBJECT-GROUP OBJECTS { hwRrppRingEnableStatus, hwRrppRingActive, hwRrppRingState, hwRrppRingNodeMode, hwRrppRingPrimaryPort, hwRrppRingSecondaryPort, hwRrppRingLevel, hwRrppRingRowStatus,hwRrppRingResetStatistics } STATUS current DESCRIPTION "The RRPP ring group." ::= { hwRrppMibGroup 3 } hwRrppPortGroup OBJECT-GROUP OBJECTS { hwRrppPortType, hwRrppPortRole, hwRrppPortState, hwRrppPortRXError, hwRrppPortRXHello, hwRrppPortRXLinkUp, hwRrppPortRXLinkDown, hwRrppPortRXCommonFlush, hwRrppPortRXCompleteFlush, hwRrppPortRXEdgeHello, hwRrppPortRXMajorFault, hwRrppPortTXError, hwRrppPortTXHello, hwRrppPortTXLinkUp, hwRrppPortTXLinkDown, hwRrppPortTXCommonFlush, hwRrppPortTXCompleteFlush, hwRrppPortTXEdgeHello, hwRrppPortTXMajorFault } STATUS current DESCRIPTION "The RRPP port group." ::= { hwRrppMibGroup 4 } hwRrppTrackInterfaceGroup OBJECT-GROUP OBJECTS { hwRrppTrackRowStatus } STATUS current DESCRIPTION "The RRPP Track Interface group." ::= { hwRrppMibGroup 5 } hwRrppRingGroupGroup OBJECT-GROUP OBJECTS {hwRrppRingGroupRowStatus } STATUS current DESCRIPTION "The RRPP RingGroup group." ::= { hwRrppMibGroup 6 } hwRrppRingGroupMemberGroup OBJECT-GROUP OBJECTS {hwRrppRingGroupIsEdgeHelloProcess,hwRrppRingGroupMemberRowStatus } STATUS current DESCRIPTION "The RRPP RingGroupMember group." ::= { hwRrppMibGroup 7 } hwRrppSnoopingInterfaceGroup OBJECT-GROUP OBJECTS { hwRrppSnoopingVsiName, hwRrppSnoopingVlanId, hwRrppSnoopingEnableStatus, hwRrppSnoopingRowStatus, hwRrppSnoopingAllVsiStatus } STATUS current DESCRIPTION "The RRPP Snooping enable Interface group." ::= { hwRrppMibGroup 8 } hwRrppSnoopingVsiGroup OBJECT-GROUP OBJECTS { hwRrppSnoopingVsiRowStatus } STATUS current DESCRIPTION "The RRPP Snooping associate vsi group." ::= { hwRrppMibGroup 9 } hwRrppNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwRrppRingRecover, hwRrppRingFail, hwRrppMultiMaster, hwRrppTrackInterfaceDown, hwRrppTrackInterfaceUp} STATUS current DESCRIPTION "The notification group." ::= { hwRrppMibGroup 10 } END