-- =================================================================
-- Copyright (C) 2007 by  HUAWEI TECHNOLOGIES. All rights reserved
-- 
-- Description: The HUAWEI-TUNNEL-MIB provides information about 
--        Tunnel configuration
--              
-- Reference:
-- Version:     V1.0
-- History:
-- V1.0 2009-06-19, publish
-- =================================================================
HUAWEI-TUNNEL-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        hwDatacomm
            FROM HUAWEI-MIB
        ifIndex
            FROM IF-MIB
        OBJECT-GROUP, MODULE-COMPLIANCE
            FROM SNMPv2-CONF
        OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, Integer32
            FROM SNMPv2-SMI
        RowStatus, DisplayString, TruthValue 
            FROM SNMPv2-TC 
         Ipv6Address                             
            FROM IPV6-TC
        ipv6IfIndex
            FROM IPV6-MIB           
        EnabledStatus                                   
            FROM P-BRIDGE-MIB
        InetAddressType, InetAddress        
            FROM INET-ADDRESS-MIB;


    hwTunnelMib MODULE-IDENTITY
        LAST-UPDATED "200906201610Z"
        ORGANIZATION "IPv6-Team of Huawei Technologies"
        CONTACT-INFO
            "R&D BeiJing, Huawei Technologies co.,Ltd.
            Showchuang Bld.,NO.3 Xinxi Rd., 
            Shang-Di Information Industry Base,
            Hai-Dian District Beijing P.R. China
            Zip:100085 "
        DESCRIPTION
            "The MIB module for entities implementing the Tunnel
             protocol configuration."
        ::= { hwDatacomm 201 } 
        
    hwTunnelMibObjects OBJECT IDENTIFIER ::= { hwTunnelMib 1 }


    -- ==============================    
    -- the IPv6 tunnel configure table
    -- ==============================    
             
    hwTunnelCfgTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF HwTunnelCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
            "MIB table for the tunnel configuration information."  
        ::= { hwTunnelMibObjects 1 }
       
    hwTunnelCfgEntry OBJECT-TYPE
        SYNTAX     HwTunnelCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
            "Describes tunnel interface configuration information."
        INDEX   { ipv6IfIndex }
        ::= { hwTunnelCfgTable 1 }     
                
    HwTunnelCfgEntry ::= SEQUENCE {
        hwTunnelProtocol          INTEGER,
        hwTunnelSourceType        INTEGER,
        hwTunnelSrcIfName         DisplayString,
        hwTunnelAddrType          InetAddressType,
        hwTunnelSourceAddr        InetAddress,
        hwTunnelDestinationAddr   InetAddress,
        hwTunnelCfgUndoFlag       INTEGER
    }                  
              
    hwTunnelProtocol OBJECT-TYPE
        SYNTAX    INTEGER {
            gre(1),               
            mplsTe(2),            
            ipv6Ipv4(3),          
            ipv6Ipv4Auto(4),      
            ipv6Ipv46to4(5),      
            ipv6Ipv4Isatap(6),    
            ipv4Ipv6(7),          
            none(8)               
            }  
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies the Tunnel protocol type."
        ::= { hwTunnelCfgEntry 1 }     
        
    hwTunnelSourceType OBJECT-TYPE
           SYNTAX       INTEGER {
               interfaceName(1),  
               sourceAddress(2),  
               unknown (3)               
            }  
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies the Tunnel source type."

        ::= { hwTunnelCfgEntry 2 }     

    hwTunnelSrcIfName OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies the tunnel source interface name."
        ::= { hwTunnelCfgEntry 3 }        

    hwTunnelAddrType OBJECT-TYPE
        SYNTAX     InetAddressType
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies the address type for Tunnel source and 
            destination address."
        ::= { hwTunnelCfgEntry 4 }        

    hwTunnelSourceAddr OBJECT-TYPE
        SYNTAX     InetAddress
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies source address of the tunnel interface."
        ::= { hwTunnelCfgEntry 5 }        
                     
    hwTunnelDestinationAddr OBJECT-TYPE
        SYNTAX     InetAddress
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies destination address of the tunnel interface."
        ::= { hwTunnelCfgEntry 6 } 

   hwTunnelCfgUndoFlag OBJECT-TYPE
        SYNTAX INTEGER {
            undoTunnelProtocol(1),
            undoTunnelSource(2),
            undoTunnelDestination(3),
            invalid(4)
            }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object specifies undo operation for specified hwTunnelCfgTable parameter."
        ::= { hwTunnelCfgEntry 7 } 


    -- ==============================    
    -- the IPv6 tunnel 4Over6 parameter configure table
    -- ==============================    
             
    hwIpv6Tunnel4Over6CfgTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF HwIpv6Tunnel4Over6CfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
            "MIB table for 4Over6 tunnel configuration information."
        ::= { hwTunnelMibObjects 2 }
       
    hwIpv6Tunnel4Over6CfgEntry OBJECT-TYPE
        SYNTAX     HwIpv6Tunnel4Over6CfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
            "Describes IPv6 tunnel 4Over6 parameters."
        INDEX   { ipv6IfIndex }
        ::= { hwIpv6Tunnel4Over6CfgTable 1 } 
                
    HwIpv6Tunnel4Over6CfgEntry ::= SEQUENCE {
        hwIpv6TunnelEncapLimit           Integer32, 
        hwIpv6TunnelEncapLimitDisable    TruthValue,
        hwIpv6TunnelFlowLabel            Integer32, 
        hwIpv6TunnelHopLimit             Integer32, 
        hwIpv6TunnelTrafficClass         Integer32, 
        hwIpv6TunnelTrafficOriginal      TruthValue,
        hwIPv6Tunnel4Over6CfgUndoFlag    INTEGER    
        }                  
              
    hwIpv6TunnelEncapLimit OBJECT-TYPE
        SYNTAX     Integer32(0..255)
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies Tunnel ipv4-ipv6 encapsulation limit."    
    DEFVAL       { 4 }            
    
        ::= { hwIpv6Tunnel4Over6CfgEntry 1 }     

  hwIpv6TunnelEncapLimitDisable   OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object specifies Tunnel encapsulation is disabled or not.
            Default value is false."           
        ::= { hwIpv6Tunnel4Over6CfgEntry 2 }  
        
    hwIpv6TunnelFlowLabel OBJECT-TYPE
        SYNTAX     Integer32(0..1048575)
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies Tunnel ipv4-ipv6 flow label." 
    DEFVAL       { 0 }            
        ::= { hwIpv6Tunnel4Over6CfgEntry 3 }                 
  
    hwIpv6TunnelHopLimit OBJECT-TYPE
        SYNTAX     Integer32(1..255)
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies Tunnel ipv4-ipv6 hop limit."
    DEFVAL       { 64 }            
        ::= { hwIpv6Tunnel4Over6CfgEntry 4 }   
                            
    hwIpv6TunnelTrafficClass OBJECT-TYPE
        SYNTAX     Integer32(0..255)
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "This object specifies Tunnel ipv4-ipv6 traffic-class." 
    DEFVAL       { 0 }             
        ::= { hwIpv6Tunnel4Over6CfgEntry 5 }    
        
    hwIpv6TunnelTrafficOriginal OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "Specifies Tunnel ipv4-ipv6 traffic-class original is enabled or not."
    DEFVAL       { true }            
        ::= { hwIpv6Tunnel4Over6CfgEntry 6 }  

   hwIPv6Tunnel4Over6CfgUndoFlag OBJECT-TYPE
        SYNTAX INTEGER {
            undoTunnelEncapLimit(1),
            undoTunnelFlowLabel(2),
            undoTunnelHopLimit(3),
            undoTunnelTrafficClass(4),
            invalid(5)
            }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
         "This object specifies undo operation for specified hwIpv6Tunnel4Over6CfgTable parameter."            
        ::= { hwIpv6Tunnel4Over6CfgEntry 7 } 

                        
        
    hwTunnelMibConformance OBJECT IDENTIFIER ::= { hwTunnelMib 2 }
    
    hwTunnelCompliances  OBJECT IDENTIFIER ::= { hwTunnelMibConformance 1 }
    hwTunnelCompliance  MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "The compliance statement for systems supporting 
             the HUAWEI-TUNNEL-MIB."
        MODULE -- this module
        MANDATORY-GROUPS {
            hwTunnelGroup
            }
        ::= { hwTunnelCompliances 1 }
    
    hwTunnelGroups OBJECT IDENTIFIER ::= { hwTunnelMibConformance 2 }
    hwTunnelGroup OBJECT-GROUP
        OBJECTS { 
        hwTunnelProtocol,
        hwTunnelSourceType,
        hwTunnelSrcIfName,
        hwTunnelAddrType,
        hwTunnelSourceAddr,
        hwTunnelDestinationAddr,
        hwTunnelCfgUndoFlag,  
        hwIpv6TunnelEncapLimit,     
        hwIpv6TunnelEncapLimitDisable,
        hwIpv6TunnelFlowLabel,
        hwIpv6TunnelHopLimit,
        hwIpv6TunnelTrafficClass,
        hwIpv6TunnelTrafficOriginal,
        hwIPv6Tunnel4Over6CfgUndoFlag}

        STATUS current
        DESCRIPTION 
            "The Tunnel table member."
        ::= { hwTunnelGroups 1 }
END