--
-- IRT4008DDA-MIB.my (MIB for DDA-4008)
-- v3.0	16/04/2010
-- 			- Swapped OID entries in irt4008ddaOutputReclock.
-- v2.0	01/02/2010
--			- Status of irt4008ddaSignalStatus descriptors changed.
--			- irt4008ddaOutputReclock and irt4008ddaDataRate OID numbers swapped.
-- v1.0	30/09/2009
--			- Original Issue.
--


	IRT4008DDA-MIB DEFINITIONS ::= BEGIN

		IMPORTS
			irtProducts, irt
				FROM IRT-MIB
			OBJECT-TYPE
				FROM RFC-1212
			TRAP-TYPE
				FROM RFC-1215
			sysObjectID, sysName
				FROM RFC1213-MIB;

--
-- Node definitions
--

-- 1.3.6.1.4.1.16557.3.55
		irt4008DDA OBJECT IDENTIFIER ::= { irtProducts 55 }


--  1.3.6.1.4.1.16557.3.55.1
		irt4008ddaAlarms OBJECT-TYPE
			SYNTAX INTEGER
				{
				noAlarm(1),
				nonUrgentAlarm(2),
				urgentAlarm(3)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"Status of the urgent and non-urgent alarms.
					Non-urgent: Reclocker unlocked
					Urgent: Loss of signal"
			::= { irt4008DDA 1 }


-- 1.3.6.1.4.1.16557.3.55.2
		irt4008ddaSignalStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				locked(1),
				unlocked(2),
				notPresent(3)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"Status of the input data signal.
					1. Locked: Locked to configured data rate
					2. Unlocked: Present but unlocked
					3. Not present"
			::= { irt4008DDA 2 }


-- 1.3.6.1.4.1.16557.3.55.3
		irt4008ddaDataRate OBJECT-TYPE
			SYNTAX INTEGER
				{
				asi-sdi(1),
				stm1-nrz(2),
				stm1-cmi(3)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Input data rate for reclocker.
					1. ASI/SDI: 270 Mbps
					2. STM-1 NRZ
					3. STM-1 CMI encoded"
			::= { irt4008DDA 3 }


--  1.3.6.1.4.1.16557.3.55.4
		irt4008ddaOutputReclock OBJECT-TYPE
			SYNTAX INTEGER
				{
				enabled(1),
				disabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Status of the reclocker.
				1. Enabled: Reclocked signal routed to the outputs.
				2. Disabled: Non-reclocked signal routed to the outputs."
			::= { irt4008DDA 4 }


--  1.3.6.1.4.1.16557.3.55.5
		irt4008ddaCableEQ OBJECT-TYPE
			SYNTAX INTEGER
				{
				normal(1),
				reduced(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Amount of cable equalisation to employ.
				1. Normal: Maximum available
				2. Reduced: Lower gain for use in a noisy environment"
			::= { irt4008DDA 5 }


--  1.3.6.1.4.1.16557.3.55.6
		irt4008ddaReset OBJECT-TYPE
			SYNTAX INTEGER
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"To reset the system, set this value to 2."
			::= { irt4008DDA 6 }


--  1.3.6.1.4.1.16557.3.55.7
		irt4008ddaSignalStatusTrapEn OBJECT-TYPE
			SYNTAX INTEGER
				{
				disabled(1),
				enabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Send a trap upon loss/restoration of input signal."
			::= { irt4008DDA 7 }


--  Trap definitions
--
		irt4008ddaSignalStatusTrap TRAP-TYPE
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4008ddaSignalStatus }
			DESCRIPTION
				"If enabled, a trap will be sent upon loss/restoration
				of input signal."
			::=  55


	END

--
-- IRT4008DDA-MIB.my
--