--
-- IRT4130AAD-MIB.my (MIB for AAD-4130)
-- v1.0	17/12/2007
--			- Original Issue.
--

	irt4130AAD-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			irtProducts, irt			
				FROM IRT-MIB			
			OBJECT-TYPE			
				FROM RFC-1212			
			TRAP-TYPE			
				FROM RFC-1215			
			sysObjectID, sysName			
				FROM RFC1213-MIB;
	
	
	
--
-- Node definitions
--
	
		-- 1.3.6.1.4.1.16557.3.29
		irt4130AAD OBJECT IDENTIFIER ::= { irtProducts 29 }

		
		-- 1.3.6.1.4.1.16557.3.29.1
		irt4130Alarms OBJECT-TYPE
			SYNTAX INTEGER
				{
				noAlarms(1),
				urgentAlarms(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The current state of the Urgent Alarm."
			::= { irt4130AAD 1 }

		
		-- 1.3.6.1.4.1.16557.3.29.2
		irt4130InputPresent OBJECT-TYPE
			SYNTAX INTEGER
				{
				notPresent(1)
				audioTwo(2),
				audioOne(3),
				audioOneAndTwo(4)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication that an input signal is present."
			::= { irt4130AAD 2 }     
			

		-- 1.3.6.1.4.1.16557.3.29.3
		irt4130Phase OBJECT-TYPE
			SYNTAX INTEGER
				{
				outOfPhase(1),
				inPhase(2)				
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication that the signals are in phase."
			::= { irt4130AAD 3 } 
			
					
 		-- 1.3.6.1.4.1.16557.3.29.4
		irt4130AlarmReset OBJECT-TYPE
			SYNTAX INTEGER 
				{
				inactive(1),
				reset(2) 
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Writing a 2 to this object will cause the agent to reset the audio fail(urgent) alarm."
			::= { irt4130AAD 4 }

		
		-- 1.3.6.1.4.1.16557.3.29.5
		irt4130Reset OBJECT-TYPE
			SYNTAX INTEGER
				{
				inactive(1),
				reset(2) 
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Writing a 2 to this object will cause the agent to reset."
			::= { irt4130AAD 5 }

		
		-- 1.3.6.1.4.1.16557.3.29.6
		irt4130Trap OBJECT-TYPE
			SYNTAX INTEGER
				{
				onAlarm(1),
				disabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"If enabled, Traps will be sent when an Urgent Alarm occurs
				Traps will also be sent when the alarm condition ceases."
			::= { irt4130AAD 6 }

		
	
--
-- Trap definitions
--
	
		irt4130onAlarmTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4130Alarms, irt4130InputPresent, irt4130Phase }
			DESCRIPTION 
				"If enabled, this Trap will be sent when an Urgent Alarm
				occurs."
			::=  29

		irt4130offAlarmTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4130Alarms, irt4130InputPresent, irt4130Phase }
			DESCRIPTION 
				"If enabled, this trap will be sent when the Alarm
				 restores."
			::=  157

	
	END

--
-- irt4130AAD-MIB.my
--