--
-- IRT4410DAC-MIB.my (MIB for DAC-4410, DAC-4411 and DAC-4412)
-- v1.0	25/03/2007
-- 			- Original Issue.
--

	IRT4410DAC-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			irtProducts, irt			
				FROM IRT-MIB			
			OBJECT-TYPE			
				FROM RFC-1212			
			TRAP-TYPE			
				FROM RFC-1215			
			sysObjectID, sysName			
				FROM RFC1213-MIB;
	
	
	
--
-- Node definitions
--
	
		-- 1.3.6.1.4.1.16557.3.24
		irt4410DAC OBJECT IDENTIFIER ::= { irtProducts 24 }

		
		-- 1.3.6.1.4.1.16557.3.24.1
		irt4410Error OBJECT-TYPE
			SYNTAX INTEGER
				{
				noError(1),
				error(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The Error state signals any of the following - 
				Validity, Parity, Bi-phase, Confidence or PLL lock errors."
			::= { irt4410DAC 1 }

		
		-- 1.3.6.1.4.1.16557.3.24.2
		irt4410SampleRate OBJECT-TYPE
			SYNTAX INTEGER
				{
				khz48orLess(1),
				khz88orMore(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the Sample Rate of the input signal."
			::= { irt4410DAC 2 }

		
		-- 1.3.6.1.4.1.16557.3.24.3
		irt4410Reset OBJECT-TYPE
			SYNTAX INTEGER (2)
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Writing a 2 to this object will cause the agent to reset."
			::= { irt4410DAC 3 }

		
		-- 1.3.6.1.4.1.16557.3.24.4
		irt4410Trap OBJECT-TYPE
			SYNTAX INTEGER
				{
				onError(1),
				disabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"If enabled, a Trap will be sent when an Error occurs
				A Trap will also be sent when the Error condition ceases."
			::= { irt4410DAC 4 }

		
		-- 1.3.6.1.4.1.16557.3.24.5
		irt4410TrapSeqNo OBJECT-TYPE
			SYNTAX INTEGER (1..127)
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"A number that increases by one for every trap sent."
			::= { irt4410DAC 5 }

		
	
--
-- Trap definitions
--
	
		irt4510onErrorTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4410TrapSeqNo }
			DESCRIPTION 
				"If enabled, this Trap will be sent when an Error occurs."
			::=  24

		irt4510offAlarmTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4410TrapSeqNo }
			DESCRIPTION 
				"If enabled, this trap will be sent when the Error
				 recovers."
			::=  152

	
	END

--
-- IRT4410DAC-MIB.my
--