--
--

	IRT4880DMM-MIB DEFINITIONS ::= BEGIN

		IMPORTS
			irtProducts, irt
				FROM IRT-MIB
			OBJECT-TYPE
				FROM RFC-1212
			TRAP-TYPE
				FROM RFC-1215
			sysObjectID, sysName, DisplayString
				FROM RFC1213-MIB;

--
-- Node definitions
--

-- 1.3.6.1.4.1.16557.3.67
		IRT4880DMM OBJECT IDENTIFIER ::= { irtProducts 67 }

	-- 1.3.6.1.4.1.16557.3.67.1
	alarms OBJECT-TYPE
		SYNTAX INTEGER
		{
			noAlarm(1),
			urgentAlarm(2),
			nonUrgentAlarm(3),
			urgAndNonUrgentAlarm(4)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Status of the urgent and non-urgent alarms.
		Urgent: N/A
		Non-urgent: No valid STM1 input on any Channel."
		::= { IRT4880DMM 1 }

	-- 1.3.6.1.4.1.16557.3.67.2
	channelInfoTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ChannelInfoEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A list of channels."
		::= { IRT4880DMM 2 }

	-- 1.3.6.1.4.1.16557.3.67.2.1
	channelInfoEntry OBJECT-TYPE
		SYNTAX ChannelInfoEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about each channel."
		INDEX { channelNumber }
		::= { channelInfoTable 1 }

	
	ChannelInfoEntry ::=
		SEQUENCE { 
			channelNumber
				INTEGER,
			channelPresent
				INTEGER,
			channelAlias
				DisplayString
		 }

	-- 1.3.6.1.4.1.16557.3.67.2.1.1
	channelNumber OBJECT-TYPE
		SYNTAX INTEGER (1..4)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Channel Number."
		::= { channelInfoEntry 1 }

	
	-- 1.3.6.1.4.1.16557.3.67.2.1.2
	channelPresent OBJECT-TYPE
		SYNTAX INTEGER
			{
			notPresent(1),
			present(2)
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An indication that the Channel signal is present."
		::= { channelInfoEntry 2 }

	-- 1.3.6.1.4.1.16557.3.67.2.1.3
	channelAlias OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"A 15 byte maximum Alias for the chosen Channel."
		::= { channelInfoEntry 3 }

	-- 1.3.6.1.4.1.16557.3.67.3
	signalStatusTrapEn OBJECT-TYPE
		SYNTAX INTEGER
		{
			notEnabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"Send a trap upon loss/restoration of input signal."
		::= { IRT4880DMM 3 }

	-- 1.3.6.1.4.1.16557.3.67.4
	fpgaVersion OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Version of the FPGA firmware."
		::= { IRT4880DMM 4 }

	-- 1.3.6.1.4.1.16557.3.67.5
	softwareVersion OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Version of the processor software."
		::= { IRT4880DMM 5 }

	-- 1.3.6.1.4.1.16557.3.67.6
	reset OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"To reset the system, set value to 2."
		::= { IRT4880DMM 6 }

--
-- Trap definitions
--


	irt4880DMMSignalStatusTrap TRAP-TYPE 
		ENTERPRISE irt
		VARIABLES { sysObjectID, sysName, channelPresent }
		DESCRIPTION 
			"If enabled, traps will be sent when a Channel is Present."
		::=  67

	END