--
--

	IRT4880DMX-MIB DEFINITIONS ::= BEGIN

		IMPORTS
			irtProducts, irt
				FROM IRT-MIB
			OBJECT-TYPE
				FROM RFC-1212
			TRAP-TYPE
				FROM RFC-1215
			sysObjectID, sysName, DisplayString
				FROM RFC1213-MIB;

--
-- Node definitions
--

-- 1.3.6.1.4.1.16557.3.68
		IRT4880DMX OBJECT IDENTIFIER ::= { irtProducts 68 }

	-- 1.3.6.1.4.1.16557.3.68.1
	alarms OBJECT-TYPE
		SYNTAX INTEGER
		{
			noAlarm(1),
			urgentAlarm(2),
			nonUrgentAlarm(3),
			urgAndNonUrgentAlarm(4)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Status of the urgent alarm.
		Urgent: Loss of STM4 input signal.
		Non-urgent: All STM1 inputs are AIS."
		::= { IRT4880DMX 1 }

	-- 1.3.6.1.4.1.16557.3.68.2
	inputSignalPresent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notpresent(1),
			present(2)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Signal Status of the STM4 input.
		1. Present.
		2. Not Present"
		::= { IRT4880DMX 2 }

	-- 1.3.6.1.4.1.16557.3.68.3
	channelInfoTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ChannelInfoEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A list of channels."
		::= { IRT4880DMX 3 }

	-- 1.3.6.1.4.1.16557.3.68.3.1
	channelInfoEntry OBJECT-TYPE
		SYNTAX ChannelInfoEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about each channel."
		INDEX { channelNumber }
		::= { channelInfoTable 1 }

	
	ChannelInfoEntry ::=
		SEQUENCE { 
			channelNumber
				INTEGER,
			channelPresent
				INTEGER,
			channelAlias
				DisplayString
		 }

	-- 1.3.6.1.4.1.16557.3.68.3.1.1
	channelNumber OBJECT-TYPE
		SYNTAX INTEGER (1..4)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Channel Number."
		::= { channelInfoEntry 1 }

	-- 1.3.6.1.4.1.16557.3.68.3.1.2
	channelStatus OBJECT-TYPE
		SYNTAX INTEGER
			{
			AIS(1),
			Present(2)
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An indication that the Channel is active or generating AIS."
		::= { channelInfoEntry 2 }

	-- 1.3.6.1.4.1.16557.3.68.3.1.3
	channelAlias OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"A 15 byte maximum Alias for the chosen Channel."
		::= { channelInfoEntry 3 }

	-- 1.3.6.1.4.1.16557.3.68.4
	allChannelStatus OBJECT-TYPE
		SYNTAX INTEGER
			{
			normal(1),
			allInputsAIS(2)
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An indication that all Channel Inputs are AIS or at least one is active STM1."
		::= { IRT4880DMX 4 }

	-- 1.3.6.1.4.1.16557.3.68.5
	inputPresentTrapEn OBJECT-TYPE
		SYNTAX INTEGER
		{
			notEnabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"Send a trap upon loss/restoration of STM4 input signal."
		::= { IRT4880DMX 5 }

	-- 1.3.6.1.4.1.16557.3.68.6
	signalStatusTrapEn OBJECT-TYPE
		SYNTAX INTEGER
		{
			notEnabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"Send a trap upon detection/not detection of all AIS STM1 inputs."
		::= { IRT4880DMX 6 }

	-- 1.3.6.1.4.1.16557.3.68.7
	firmwareVersion OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Version of the FPGA firmware."
		::= { IRT4880DMX 7 }

	-- 1.3.6.1.4.1.16557.3.68.8
	softwareVersion OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Version of the processor software."
		::= { IRT4880DMX 8 }

	-- 1.3.6.1.4.1.16557.3.68.9
	reset OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"To reset the system, set value to 2."
		::= { IRT4880DMX 9 }

--
-- Trap definitions
--

	irt4880DMXInputPresentTrap TRAP-TYPE
		ENTERPRISE irt
		VARIABLES { sysObjectID, sysName, inputSignalPresent}
		DESCRIPTION
		"If enabled, a trap will be sent upon loss/restoration
			of STM4 input signal."
		::=  68

	irt4880DMXSignalStatusTrap TRAP-TYPE
		ENTERPRISE irt
		VARIABLES { sysObjectID, sysName, channelStatus}
		DESCRIPTION
		"If enabled, a trap will be sent upon loss/restoration
			of STM1 output signal."
		::=  196

	END