-- -- SYMBOL-AP-MIB-01h18.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Friday, May 14, 2010 at 15:10:15 -- -- -- Notes for AP5131 MIB: -- -- === v2.1.0.0, (MIB='01e'): -- -- Values 'apRadioCfgRfFunction', 'apWipsPrimaryServerAddr', and 'apWipsSecondaryServerAddr' Added. -- -- === v2.0.0.0, (MIB='03d'): -- -- Value 'apRadioSettingsQBSSLoadElementMode' Added. -- -- === v2.0.0.0, (MIB='02d'): -- -- Value 'apRadiusServer' Added. -- (To support AAA Time based access policy rules) -- -- === v2.0.0.0, (MIB='01d'): -- -- Value 'apWlanWeight' is obsoleted -- (Refer to apRadioWlanWeight). -- -- === v1.1.1.0, (MIB='01c'): -- -- This MIB can now be used for both AP5131 and AP5181. -- -- New sysoid is introduced for AP5181. -- -- Table 'apWanDynDNS' added to support DynDNS feature. -- -- Mesh Time Out Changes: In a dual-radio AP, if the radio running as a client bridge (CB) does not have an uplink connection to the base bridge (BB) after the Timeout period (in seconds), stop the other radio from sending beacons. -- -- Login Message Feature added: User can now configure a Login message text which gets displayed on successful login. This feature can be turned ON/OFF with Login message mode settings. -- -- -- -- === v1.1, (MIB='01b'): -- -- Value 'apLanEnable' is deprecated (We shall be using the -- ccSubnetEnable from the WS2000 MIB for this operation). -- -- Value 'apLanVlanEnable' is obsoleted -- (Refer to apSubnetVlanTable). -- -- Value 'apLanTypeFilterAccessMode' is obsoleted -- (Refer to apSubnetTypeFilterAccessMode). -- -- Added another index 'apLanTypeFilterSubnetIndex' in the -- apLanTypeFilterTable. -- -- -- === v1.0, (MIB='01a'): -- -- (no notes at this time). SYMBOL-AP-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF enterprises, TimeTicks, IpAddress, Integer32, Unsigned32, Counter32, BITS, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue, TestAndIncr, PhysAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC ccWanIndex, ccWanVpnEntry, ccSubnetEntry, ccPortalIndex, ccMuMac, ccWlanIndex, ccMuWlanIndex, ccMuWlanName, ccMuIsDataReady, ccMuPortalIndex, ccMuPortalMac, ccMuSymbolRogueApEna, ccMuIpAddr, ccMuType, ccMuRadioType, ccMuSupportedRates, ccMuPowerMode, ccMuAuthenticationMethod, ccMuEncryptionMethod, ccMuVlanId, ccMuMeshMode, ccMuTxPktsUcast, ccMuRxPktsUcast, ccMuRxPktsNUcast, ccMuTxOctetsUcast, ccMuRxOctetsUcast, ccMuRxOctetsNUcast, ccMuRxUndecryptablePkts, ccMuRxRssiNumPkts, ccMuRxRssiSum, ccMuRxRssiSumSquares, ccMuRxRssiMostRecent, ccMuLastActivity, ccMuRxPktsAt1Mb, ccMuRxPktsAt2Mb, ccMuRxPktsAt5pt5Mb, ccMuRxPktsAt6Mb, ccMuRxPktsAt9Mb, ccMuRxPktsAt11Mb, ccMuRxPktsAt12Mb, ccMuRxPktsAt18Mb, ccMuRxPktsAt22Mb, ccMuRxPktsAt24Mb, ccMuRxPktsAt36Mb, ccMuRxPktsAt48Mb, ccMuRxPktsAt54Mb, ccMuTxPktsAt1Mb, ccMuTxPktsAt2Mb, ccMuTxPktsAt5pt5Mb, ccMuTxPktsAt6Mb, ccMuTxPktsAt9Mb, ccMuTxPktsAt11Mb, ccMuTxPktsAt12Mb, ccMuTxPktsAt18Mb, ccMuTxPktsAt22Mb, ccMuTxPktsAt24Mb, ccMuTxPktsAt36Mb, ccMuTxPktsAt48Mb, ccMuTxPktsAt54Mb, ccMuRxOctetsAt1Mb, ccMuRxOctetsAt2Mb, ccMuRxOctetsAt5pt5Mb, ccMuRxOctetsAt6Mb, ccMuRxOctetsAt9Mb, ccMuRxOctetsAt11Mb, ccMuRxOctetsAt12Mb, ccMuRxOctetsAt18Mb, ccMuRxOctetsAt22Mb, ccMuRxOctetsAt24Mb, ccMuRxOctetsAt36Mb, ccMuRxOctetsAt48Mb, ccMuRxOctetsAt54Mb, ccMuTxOctetsAt1Mb, ccMuTxOctetsAt2Mb, ccMuTxOctetsAt5pt5Mb, ccMuTxOctetsAt6Mb, ccMuTxOctetsAt9Mb, ccMuTxOctetsAt11Mb, ccMuTxOctetsAt12Mb, ccMuTxOctetsAt18Mb, ccMuTxOctetsAt22Mb, ccMuTxOctetsAt24Mb, ccMuTxOctetsAt36Mb, ccMuTxOctetsAt48Mb, ccMuTxOctetsAt54Mb, ccMuTxRetriesNone, ccMuTxRetries01, ccMuTxRetries02, ccMuTxRetries03, ccMuTxRetries04, ccMuTxRetries05, ccMuTxRetries06, ccMuTxRetries07, ccMuTxRetries08, ccMuTxRetries09, ccMuTxRetries10, ccMuTxRetries11, ccMuTxRetries12, ccMuTxRetries13, ccMuTxRetries14, ccMuTxRetries15, ccMuTxRetriesFailed, ccMuTxRetriesTotal, ccMuTxRetriesMostRecent, ccMuLastMac, ccMuLastReason, ccMuLastPortal, ccMuTxRetriesOctetsNone, ccMuTxRetriesOctets01, ccMuTxRetriesOctets02, ccMuTxRetriesOctets03, ccMuTxRetriesOctets04, ccMuTxRetriesOctets05, ccMuTxRetriesOctets06, ccMuTxRetriesOctets07, ccMuTxRetriesOctets08, ccMuTxRetriesOctets09, ccMuTxRetriesOctets10, ccMuTxRetriesOctets11, ccMuTxRetriesOctets12, ccMuTxRetriesOctets13, ccMuTxRetriesOctets14, ccMuTxRetriesOctets15, ccMuTxRetriesOctetsFailed, ccMuSigStatsNumPkts, ccMuSigStatsSignalBest, ccMuSigStatsSignalWorst, ccMuSigStatsSignalSum, ccMuSigStatsSignalSumSquares, ccMuSigStatsSignalMostRecent, ccMuSigStatsNoiseBest, ccMuSigStatsNoiseWorst, ccMuSigStatsNoiseSum, ccMuSigStatsNoiseSumSquares, ccMuSigStatsNoiseMostRecent, ccMuSigStatsSnrBest, ccMuSigStatsSnrWorst, ccMuSigStatsSnrSum, ccMuSigStatsSnrSumSquares, ccMuSigStatsSnrMostRecent, ccMuSumStatsShortTimestamp, ccMuSumStatsShortNumPkts, ccMuSumStatsShortPktsPerSec100, ccMuSumStatsShortPktsPerSecTx100, ccMuSumStatsShortPktsPerSecRx100, ccMuSumStatsShortThroughput, ccMuSumStatsShortThroughputTx, ccMuSumStatsShortThroughputRx, ccMuSumStatsShortAvgBitSpeed, ccMuSumStatsShortAvgMuSignal, ccMuSumStatsShortAvgMuNoise, ccMuSumStatsShortAvgMuSnr, ccMuSumStatsShortPp10kNUcastPkts, ccMuSumStatsShortPp10kTxWithRetries, ccMuSumStatsShortPp10kDropped, ccMuSumStatsShortTxAvgRetries100, ccMuSumStatsShortPp10kRxUndecrypt, ccMuSumStatsLongTimestamp, ccMuSumStatsLongNumPkts, ccMuSumStatsLongPktsPerSec100, ccMuSumStatsLongPktsPerSecTx100, ccMuSumStatsLongPktsPerSecRx100, ccMuSumStatsLongThroughput, ccMuSumStatsLongThroughputTx, ccMuSumStatsLongThroughputRx, ccMuSumStatsLongAvgBitSpeed, ccMuSumStatsLongAvgMuSignal, ccMuSumStatsLongAvgMuNoise, ccMuSumStatsLongAvgMuSnr, ccMuSumStatsLongPp10kNUcastPkts, ccMuSumStatsLongPp10kTxWithRetries, ccMuSumStatsLongPp10kDropped, ccMuSumStatsLongTxAvgRetries100, ccMuSumStatsLongPp10kRxUndecrypt, ccWlanName, ccWlanEssid, ccWlanSubnet, ccWlanPortalsAdopted, ccWlanEnable, ccWlanDisallowMuToMu, ccWlanVoicePrioritization, ccWlanAnswerBroadcastEss, ccWlanMulticastAddr1, ccWlanMulticastAddr2, ccWlanMuAclDefault, ccWlanAuthentication, ccWlanEncryption, ccWlanWeight, ccWlanSecBeacon, ccWlanVlanId, ccWlanThresholdRate, ccWlanAuthEapReauthenticationEnable, ccWlanAuthEapReauthenticationPeriod, ccWlanAuthEapReauthenticationMaxRetries, ccWlanAuthEapRadius1Server, ccWlanAuthEapRadius1Port, ccWlanAuthEapRadius1SharedSecret, ccWlanAuthEapRadius2Server, ccWlanAuthEapRadius2Port, ccWlanAuthEapRadius2SharedSecret, ccWlanAuthEapMuQuietPeriod, ccWlanAuthEapMuTimeout, ccWlanAuthEapMuTxPeriod, ccWlanAuthEapMuMaxRetries, ccWlanAuthEapServerTimeout, ccWlanAuthEapServerMaxRetries, ccWlanAuthEapRadiusAcctMode, ccWlanAuthEapRadiusAcctMuTimeout, ccWlanAuthEapRadiusAcctMuRetries, ccWlanAuthEapSyslogMode, ccWlanAuthEapSyslogSeverIp, ccWlanAuthKerberosRealmName, ccWlanAuthKerberosUsername, ccWlanAuthKerberosPassword, ccWlanAuthKerberosKdcServerIp1, ccWlanAuthKerberosKdcPort1, ccWlanAuthKerberosKdcServerIp2, ccWlanAuthKerberosKdcPort2, ccWlanAuthKerberosKdcServerIpR, ccWlanAuthKerberosKdcPortR, ccWlanCryptoWepPassKey, ccWlanCryptoWepKey1, ccWlanCryptoWepKey2, ccWlanCryptoWepKey3, ccWlanCryptoWepKey4, ccWlanCryptoWepKeyToUse, ccWlanCryptoWpaBcastKeyRotation, ccWlanCryptoWpaKeyRotationInterval, ccWlanCryptoWpaKeyToUse, ccWlanCryptoWpaPassphrase, ccWlanCryptoWpaKey, ccWlanCryptoUseWpa2, ccWlanCryptoKeyguardPasskey, ccWlanCryptoKeyguardKey1, ccWlanCryptoKeyguardKey2, ccWlanCryptoKeyguardKey3, ccWlanCryptoKeyguardKey4, ccWlanCryptoKeyguardKeyToUse, ccWlanCryptoWpaTwoBcastKeyRotation, ccWlanCryptoWpaTwoKeyRotationInterval, ccWlanCryptoWpaTwoKeyToUse, ccWlanCryptoWpaTwoPassphrase, ccWlanCryptoWpaTwoKey, ccWlanCryptoWpaTwoAllowTkipClient, ccWlanCryptoWpaTwoFastRoamPreAuth, ccWlanCryptoWpaTwoFastRoamKeyCache, ccWlanMuAclIndex, ccWlanMuAclStartingMac, ccWlanMuAclEndingMac, ccWlanMuAclRowStatus, ccWlanMuAclName, ccWlanBwShareMode, ccWlanQosMonitorSent, ccWlanQosMonitorDropped, ccWlanQosWMEProfileIndex, ccWlanQosWMEProfileName, ccWlanQosWMEProfileBestEffortECwmin, ccWlanQosWMEProfileBestEffortECwmax, ccWlanQosWMEProfileBestEffortAifsn, ccWlanQosWMEProfileBestEffortTxopsTime, ccWlanQosWMEProfileBackgroundECwmin, ccWlanQosWMEProfileBackgroundECwmax, ccWlanQosWMEProfileBackgroundAifsn, ccWlanQosWMEProfileBackgroundTxopsTime, ccWlanQosWMEProfileVideoECwmin, ccWlanQosWMEProfileVideoECwmax, ccWlanQosWMEProfileVideoAifsn, ccWlanQosWMEProfileVideoTxopsTime, ccWlanQosWMEProfileVoiceECwmin, ccWlanQosWMEProfileVoiceECwmax, ccWlanQosWMEProfileVoiceAifsn, ccWlanQosWMEProfileVoiceTxopsTime, ccWlanQosWMEProfileRowStatus, ccWlanQosWMEWlanProfile, ccWlanQosWMETrafficIndex, ccWlanQosWMETrafficSrcIp, ccWlanQosWMETrafficSrcMask, ccWlanQosWMETrafficDestIp, ccWlanQosWMETrafficDestMask, ccWlanQosWMETrafficSrcPortStart, ccWlanQosWMETrafficSrcPortEnd, ccWlanQosWMETrafficDestPortStart, ccWlanQosWMETrafficDestPortEnd, ccWlanQosWMETrafficAccessCategory, ccWlanQosWMETrafficRowStatus, ccWlanQosWMEPriorityConversion, ccWlanMuInactivityTimeout, ccWlanWEPSharedMode, ccWlanTxPktsUcast, ccWlanRxPktsUcast, ccWlanRxPktsNUcast, ccWlanTxOctetsUcast, ccWlanRxOctetsUcast, ccWlanRxOctetsNUcast, ccWlanRxUndecryptablePkts, ccWlanLastActivity, ccWlanRxPktsAt1Mb, ccWlanRxPktsAt2Mb, ccWlanRxPktsAt5pt5Mb, ccWlanRxPktsAt6Mb, ccWlanRxPktsAt9Mb, ccWlanRxPktsAt11Mb, ccWlanRxPktsAt12Mb, ccWlanRxPktsAt18Mb, ccWlanRxPktsAt22Mb, ccWlanRxPktsAt24Mb, ccWlanRxPktsAt36Mb, ccWlanRxPktsAt48Mb, ccWlanRxPktsAt54Mb, ccWlanTxPktsAt1Mb, ccWlanTxPktsAt2Mb, ccWlanTxPktsAt5pt5Mb, ccWlanTxPktsAt6Mb, ccWlanTxPktsAt9Mb, ccWlanTxPktsAt11Mb, ccWlanTxPktsAt12Mb, ccWlanTxPktsAt18Mb, ccWlanTxPktsAt22Mb, ccWlanTxPktsAt24Mb, ccWlanTxPktsAt36Mb, ccWlanTxPktsAt48Mb, ccWlanTxPktsAt54Mb, ccWlanRxOctetsAt1Mb, ccWlanRxOctetsAt2Mb, ccWlanRxOctetsAt5pt5Mb, ccWlanRxOctetsAt6Mb, ccWlanRxOctetsAt9Mb, ccWlanRxOctetsAt11Mb, ccWlanRxOctetsAt12Mb, ccWlanRxOctetsAt18Mb, ccWlanRxOctetsAt22Mb, ccWlanRxOctetsAt24Mb, ccWlanRxOctetsAt36Mb, ccWlanRxOctetsAt48Mb, ccWlanRxOctetsAt54Mb, ccWlanTxOctetsAt1Mb, ccWlanTxOctetsAt2Mb, ccWlanTxOctetsAt5pt5Mb, ccWlanTxOctetsAt6Mb, ccWlanTxOctetsAt9Mb, ccWlanTxOctetsAt11Mb, ccWlanTxOctetsAt12Mb, ccWlanTxOctetsAt18Mb, ccWlanTxOctetsAt22Mb, ccWlanTxOctetsAt24Mb, ccWlanTxOctetsAt36Mb, ccWlanTxOctetsAt48Mb, ccWlanTxOctetsAt54Mb, ccWlanTxRetriesPktsNone, ccWlanTxRetriesPkts01, ccWlanTxRetriesPkts02, ccWlanTxRetriesPkts03, ccWlanTxRetriesPkts04, ccWlanTxRetriesPkts05, ccWlanTxRetriesPkts06, ccWlanTxRetriesPkts07, ccWlanTxRetriesPkts08, ccWlanTxRetriesPkts09, ccWlanTxRetriesPkts10, ccWlanTxRetriesPkts11, ccWlanTxRetriesPkts12, ccWlanTxRetriesPkts13, ccWlanTxRetriesPkts14, ccWlanTxRetriesPkts15, ccWlanTxRetriesPktsFailed, ccWlanTxRetriesOctetsNone, ccWlanTxRetriesOctets01, ccWlanTxRetriesOctets02, ccWlanTxRetriesOctets03, ccWlanTxRetriesOctets04, ccWlanTxRetriesOctets05, ccWlanTxRetriesOctets06, ccWlanTxRetriesOctets07, ccWlanTxRetriesOctets08, ccWlanTxRetriesOctets09, ccWlanTxRetriesOctets10, ccWlanTxRetriesOctets11, ccWlanTxRetriesOctets12, ccWlanTxRetriesOctets13, ccWlanTxRetriesOctets14, ccWlanTxRetriesOctets15, ccWlanTxRetriesOctetsFailed, ccWlanSigStatsNumPkts, ccWlanSigStatsSignalBest, ccWlanSigStatsSignalWorst, ccWlanSigStatsSignalSum, ccWlanSigStatsSignalSumSquares, ccWlanSigStatsNoiseBest, ccWlanSigStatsNoiseWorst, ccWlanSigStatsNoiseSum, ccWlanSigStatsNoiseSumSquares, ccWlanSigStatsSnrBest, ccWlanSigStatsSnrWorst, ccWlanSigStatsSnrSum, ccWlanSigStatsSnrSumSquares, ccWlanSumStatsShortTimestamp, ccWlanSumStatsShortNumPkts, ccWlanSumStatsShortPktsPerSec100, ccWlanSumStatsShortPktsPerSecTx100, ccWlanSumStatsShortPktsPerSecRx100, ccWlanSumStatsShortThroughput, ccWlanSumStatsShortThroughputTx, ccWlanSumStatsShortThroughputRx, ccWlanSumStatsShortAvgBitSpeed, ccWlanSumStatsShortAvgMuSignal, ccWlanSumStatsShortAvgMuNoise, ccWlanSumStatsShortAvgMuSnr, ccWlanSumStatsShortPp10kNUcastPkts, ccWlanSumStatsShortPp10kTxWithRetries, ccWlanSumStatsShortPp10kDropped, ccWlanSumStatsShortTxAvgRetries100, ccWlanSumStatsShortPp10kRxUndecrypt, ccWlanSumStatsShortTotalMus, ccWlanSumStatsShortSkip1, ccWlanSumStatsLongTimestamp, ccWlanSumStatsLongNumPkts, ccWlanSumStatsLongPktsPerSec100, ccWlanSumStatsLongPktsPerSecTx100, ccWlanSumStatsLongPktsPerSecRx100, ccWlanSumStatsLongThroughput, ccWlanSumStatsLongThroughputTx, ccWlanSumStatsLongThroughputRx, ccWlanSumStatsLongAvgBitSpeed, ccWlanSumStatsLongAvgMuSignal, ccWlanSumStatsLongAvgMuNoise, ccWlanSumStatsLongAvgMuSnr, ccWlanSumStatsLongPp10kNUcastPkts, ccWlanSumStatsLongPp10kTxWithRetries, ccWlanSumStatsLongPp10kDropped, ccWlanSumStatsLongTxAvgRetries100, ccWlanSumStatsLongPp10kRxUndecrypt, ccWlanSumStatsLongTotalMus, ccWlanSumStatsLongSkip1, ccPortalPointerToAp, ccPortalPointersToWlans, ccPortalName, ccPortalLocation, ccPortalOptions, ccPortalMac, ccPortalNumberOfEss, ccPortalNumberOfBss, ccPortalAssociatedMus, ccPortalRadioType, ccPortalChannel, ccPortalTxPowerLevel, ccPortalLastAdoption, ccPortalState, ccPortalBackgroundNoiseNumSamples, ccPortalBackgroundNoiseBest, ccPortalBackgroundNoiseWorst, ccPortalBackgroundNoiseSum, ccPortalBackgroundNoiseSumSquares, ccPortalIpAddress, ccPortalModeLegacy, ccPortalLastMac, ccPortalLastReason, ccPortalAdoptionIndex, ccPortalAdoptionStartMac, ccPortalAdoptionEndMac, ccPortalAdoptionWlanPointers, ccPortalAdoptionRowStatus, ccPortalSystemStatsBeaconsTx, ccPortalSystemStatsBeaconsTxOctets, ccPortalSystemStatsProbeReqRx, ccPortalSystemStatsProbeReqRxOctets, ccPortalSystemStatsProbeRespRetriesNone, ccPortalSystemStatsProbeRespRetries1, ccPortalSystemStatsProbeRespRetries2, ccPortalSystemStatsProbeRespRetries3OrMore, ccPortalSystemStatsProbeRespRetriesFailed, ccPortalSystemStatsProbeRespTxOctets, ccPortalSettingsName, ccPortalSettingsLocation, ccPortalSettingsAntenna, ccPortalSettingsShortPreamble, ccPortalSettingsUniSpread, ccPortalSettingsRtsThresh, ccPortalSettingsBeaconInt, ccPortalSettingsDtimPrd, ccPortalSettingsSecBeacon, ccPortalSettingsPriWlan, ccPortalSettingsBasicRates, ccPortalSettingsSupportedRates, ccPortalSettingsBGMode, ccPortalSettingsAdoptedWlan, ccPortalSettingsDetector, ccPortalSettingsWMEProfile, ccPortalSettingsDtimPrd2, ccPortalSettingsDtimPrd3, ccPortalSettingsDtimPrd4, ccPortalSettingsRevertAp, ccPortalSettingsSipAllowedSessCnt, ccPortalSettingsSipActiveSessCnt, ccPortalSettingsSipInActiveSessCnt, ccPortalSettingsSipRoamedSessCnt, ccPortalSettingsMeshClientEnable, ccPortalSettingsMeshClientWlanIndex, ccPortalSettingsMeshAutoBaseSelection, ccPortalSettingsMeshBaseChannel, ccPortalSettingsMeshBaseEnable, ccPortalSettingsMeshMaxClients, ccPortalCfgRadioDesPlacement, ccPortalCfgRadioPosChannel, ccPortalCfgRadioDesChannel, ccPortalCfgRadioPosPowerLevel, ccPortalCfgRadioDesPowerLevel, ccPortalCfgRadioDesPowerInMW, ccPortalCfgRadioSet, ccPortalCfgRadioReset, ccPortalCfgRadioPlacement, ccPortalCfgRadioChannel, ccPortalCfgRadioPowerLevel, ccPortalCfgRadioPowerInMW, ccPortalCfgRadioChannelMode, ccPortalCfgRadioRemapChannel, ccPortalSettingsDefaultIndex, ccPortalSettingsDefaultAntenna, ccPortalSettingsDefaultShortPreamble, ccPortalSettingsDefaultUniSpread, ccPortalSettingsDefaultRtsThresh, ccPortalSettingsDefaultBeaconInt, ccPortalSettingsDefaultDtimPrd, ccPortalSettingsDefaultSecBeacon, ccPortalSettingsDefaultPriWlan, ccPortalSettingsDefaultBasicRates, ccPortalSettingsDefaultSupportedRates, ccPortalSettingsDefaultBGMode, ccPortalSettingsDefaultDtimPrd2, ccPortalSettingsDefaultDtimPrd3, ccPortalSettingsDefaultDtimPrd4, ccPortalCfgRadioDefaultDesPlacement, ccPortalCfgRadioDefaultPosChannel, ccPortalCfgRadioDefaultDesChannel, ccPortalCfgRadioDefaultPosPowerLevel, ccPortalCfgRadioDefaultDesPowerLevel, ccPortalCfgRadioDefaultDesPowerInMW, ccPortalCfgRadioDefaultSet, ccPortalCfgRadioDefaultReset, ccPortalCfgRadioDefaultPlacement, ccPortalCfgRadioDefaultChannel, ccPortalCfgRadioDefaultPowerLevel, ccPortalCfgRadioDefaultPowerInMW, ccPortalCfgRadioDefaultChannelMode, cc802dt1xPortAuthLogin, cc802dt1xPortAuthPass, cc802dt1xPortAuthSetAp300, ccPortalRadioRemapChannel, ccPortalSIPCacMode, ccPortalMeshAvailableBaseMac, ccPortalMeshAvailableBaseChannel, ccPortalMeshAvailableBaseRssi, ccPortalMeshPreferredBaseMac, ccPortalMeshPreferredBaseRowStatus, ccPortalTxPktsUcast, ccPortalRxPktsUcast, ccPortalRxPktsNUcast, ccPortalTxOctetsUcast, ccPortalRxOctetsUcast, ccPortalRxOctetsNUcast, ccPortalRxUndecryptablePkts, ccPortalLastActivity, ccPortalRxPktsAt1Mb, ccPortalRxPktsAt2Mb, ccPortalRxPktsAt5pt5Mb, ccPortalRxPktsAt6Mb, ccPortalRxPktsAt9Mb, ccPortalRxPktsAt11Mb, ccPortalRxPktsAt12Mb, ccPortalRxPktsAt18Mb, ccPortalRxPktsAt22Mb, ccPortalRxPktsAt24Mb, ccPortalRxPktsAt36Mb, ccPortalRxPktsAt48Mb, ccPortalRxPktsAt54Mb, ccPortalTxPktsAt1Mb, ccPortalTxPktsAt2Mb, ccPortalTxPktsAt5pt5Mb, ccPortalTxPktsAt6Mb, ccPortalTxPktsAt9Mb, ccPortalTxPktsAt11Mb, ccPortalTxPktsAt12Mb, ccPortalTxPktsAt18Mb, ccPortalTxPktsAt22Mb, ccPortalTxPktsAt24Mb, ccPortalTxPktsAt36Mb, ccPortalTxPktsAt48Mb, ccPortalTxPktsAt54Mb, ccPortalRxOctetsAt1Mb, ccPortalRxOctetsAt2Mb, ccPortalRxOctetsAt5pt5Mb, ccPortalRxOctetsAt6Mb, ccPortalRxOctetsAt9Mb, ccPortalRxOctetsAt11Mb, ccPortalRxOctetsAt12Mb, ccPortalRxOctetsAt18Mb, ccPortalRxOctetsAt22Mb, ccPortalRxOctetsAt24Mb, ccPortalRxOctetsAt36Mb, ccPortalRxOctetsAt48Mb, ccPortalRxOctetsAt54Mb, ccPortalTxOctetsAt1Mb, ccPortalTxOctetsAt2Mb, ccPortalTxOctetsAt5pt5Mb, ccPortalTxOctetsAt6Mb, ccPortalTxOctetsAt9Mb, ccPortalTxOctetsAt11Mb, ccPortalTxOctetsAt12Mb, ccPortalTxOctetsAt18Mb, ccPortalTxOctetsAt22Mb, ccPortalTxOctetsAt24Mb, ccPortalTxOctetsAt36Mb, ccPortalTxOctetsAt48Mb, ccPortalTxOctetsAt54Mb, ccPortalTxRetriesPktsNone, ccPortalTxRetriesPkts01, ccPortalTxRetriesPkts02, ccPortalTxRetriesPkts03, ccPortalTxRetriesPkts04, ccPortalTxRetriesPkts05, ccPortalTxRetriesPkts06, ccPortalTxRetriesPkts07, ccPortalTxRetriesPkts08, ccPortalTxRetriesPkts09, ccPortalTxRetriesPkts10, ccPortalTxRetriesPkts11, ccPortalTxRetriesPkts12, ccPortalTxRetriesPkts13, ccPortalTxRetriesPkts14, ccPortalTxRetriesPkts15, ccPortalTxRetriesPktsFailed, ccPortalTxRetriesOctetsNone, ccPortalTxRetriesOctets01, ccPortalTxRetriesOctets02, ccPortalTxRetriesOctets03, ccPortalTxRetriesOctets04, ccPortalTxRetriesOctets05, ccPortalTxRetriesOctets06, ccPortalTxRetriesOctets07, ccPortalTxRetriesOctets08, ccPortalTxRetriesOctets09, ccPortalTxRetriesOctets10, ccPortalTxRetriesOctets11, ccPortalTxRetriesOctets12, ccPortalTxRetriesOctets13, ccPortalTxRetriesOctets14, ccPortalTxRetriesOctets15, ccPortalTxRetriesOctetsFailed, ccPortalSigStatsNumPkts, ccPortalSigStatsSignalBest, ccPortalSigStatsSignalWorst, ccPortalSigStatsSignalSum, ccPortalSigStatsSignalSumSquares, ccPortalSigStatsSignalMostRecent, ccPortalSigStatsNoiseBest, ccPortalSigStatsNoiseWorst, ccPortalSigStatsNoiseSum, ccPortalSigStatsNoiseSumSquares, ccPortalSigStatsNoiseMostRecent, ccPortalSigStatsSnrBest, ccPortalSigStatsSnrWorst, ccPortalSigStatsSnrSum, ccPortalSigStatsSnrSumSquares, ccPortalSigStatsSnrMostRecent, ccPortalSumStatsShortTimestamp, ccPortalSumStatsShortNumPkts, ccPortalSumStatsShortPktsPerSec100, ccPortalSumStatsShortPktsPerSecTx100, ccPortalSumStatsShortPktsPerSecRx100, ccPortalSumStatsShortThroughput, ccPortalSumStatsShortThroughputTx, ccPortalSumStatsShortThroughputRx, ccPortalSumStatsShortAvgBitSpeed, ccPortalSumStatsShortAvgMuSignal, ccPortalSumStatsShortAvgMuNoise, ccPortalSumStatsShortAvgMuSnr, ccPortalSumStatsShortPp10kNUcastPkts, ccPortalSumStatsShortPp10kTxWithRetries, ccPortalSumStatsShortPp10kTxMaxRetries, ccPortalSumStatsShortTxAvgRetries100, ccPortalSumStatsShortPp10kRxUndecrypt, ccPortalSumStatsShortTotalMus, ccPortalSumStatsShortPp10kRfUtil, ccPortalSumStatsShortPp10kDropped, ccPortalSumStatsLongTimestamp, ccPortalSumStatsLongNumPkts, ccPortalSumStatsLongPktsPerSec100, ccPortalSumStatsLongPktsPerSecTx100, ccPortalSumStatsLongPktsPerSecRx100, ccPortalSumStatsLongThroughput, ccPortalSumStatsLongThroughputTx, ccPortalSumStatsLongThroughputRx, ccPortalSumStatsLongAvgBitSpeed, ccPortalSumStatsLongAvgMuSignal, ccPortalSumStatsLongAvgMuNoise, ccPortalSumStatsLongAvgMuSnr, ccPortalSumStatsLongPp10kNUcastPkts, ccPortalSumStatsLongPp10kTxWithRetries, ccPortalSumStatsLongPp10kTxMaxRetries, ccPortalSumStatsLongTxAvgRetries100, ccPortalSumStatsLongPp10kRxUndecrypt, ccPortalSumStatsLongTotalMus, ccPortalSumStatsLongPp10kRfUtil, ccPortalSumStatsLongPp10kDropped, ccPortalLegacyMode FROM SYMBOL-CC-WS2000-MIB; -- 1.3.6.1.4.1.388.11.3.1 moduleid MODULE-IDENTITY LAST-UPDATED "201005111435Z" -- May 11, 2010 at 14:35 GMT ORGANIZATION "Symbol WSD (Wireless Infrastructure Division, San Jose)" CONTACT-INFO "Carl Mower cmower@symbol.com" DESCRIPTION " " REVISION "201005111435Z" -- May 11, 2010 at 14:35 GMT DESCRIPTION "Added WirelessWanTunnel related MIBs, i.e. apWirelessWanTunnelRequired, apWirelessWanTunnelRemoteIp, apWirelessWanTunnelPassPhrase, apWirelessWanTunnelRemoteGateway, apWirelessWanTunnelEncryptionType, apWirelessWanTunnelRemoteSubnetMask, apWirelessWanTunnelInterface, apWirelessWanApName." REVISION "201005111421Z" -- May 11, 2010 at 14:21 GMT DESCRIPTION "Added apRadioSettingsDynamicChainSelectEnable for DCS configuration" REVISION "201002231943Z" -- February 23, 2010 at 19:43 GMT DESCRIPTION "Antenna Gain range modified" REVISION "201001221549Z" -- January 22, 2010 at 15:49 GMT DESCRIPTION "added apLEDEnabled MIB" REVISION "200912231753Z" -- December 23, 2009 at 17:53 GMT DESCRIPTION "3g remote Gateway server OIDs added includes apWirelessWanRemoteGw1, apWirelessWanRemoteGw2, apWirelessWanRemoteGw3. apHotSpotLoadCfgDeleteAll OID added and apHotSpotLoadCfgFilename is modified to OCTET string to support multiple file names. apWlanCryptoCcmpWepMixedMode added to allow WEP settings. apRadioSettingsAntennaType removed from the table. " REVISION "200912101711Z" -- December 10, 2009 at 17:11 GMT DESCRIPTION "Added sftpConfigServerToAP, sftpConfigAPToServer for providing SFTP capability." REVISION "200912101656Z" -- December 10, 2009 at 16:56 GMT DESCRIPTION "Added apRadioSettingsTxPowerAntennaType, apRadioSettingsTxPowerAntennaGain for Tx Power Management feature" REVISION "200912101633Z" -- December 10, 2009 at 16:33 GMT DESCRIPTION "Added apRadioCfgBcMcTxControl MIB for Broadcast/Multicast transmit control feature." REVISION "200912101559Z" -- December 10, 2009 at 15:59 GMT DESCRIPTION "Added apHotSpotLoadCfgTable for the hotspot customization feature" REVISION "200912081656Z" -- December 08, 2009 at 16:56 GMT DESCRIPTION "Added apWlanProxyARPEnabled MIB to support Proxy ARP feature" REVISION "200910061640Z" -- October 06, 2009 at 16:40 GMT DESCRIPTION "Added the apRadioSensorOnlyModeEnabled scalar" REVISION "200910061525Z" -- October 06, 2009 at 15:25 GMT DESCRIPTION "Added apWirelessWanState object in apWirelessWanTable" REVISION "200910011835Z" -- October 01, 2009 at 18:35 GMT DESCRIPTION "Added Wireless Wan Traps" REVISION "200909291648Z" -- September 29, 2009 at 16:48 GMT DESCRIPTION "Added Wireless Wan table" ::= { abgAP 1 } -- -- Type definitions -- -- -- SinglePointer ::= INTEGER (0..255) MultiPointer63 ::= BITS { null(0), referToEntry001(1), referToEntry002(2), referToEntry003(3), referToEntry004(4), referToEntry005(5), referToEntry006(6), referToEntry007(7), referToEntry008(8), referToEntry009(9), referToEntry010(10), referToEntry011(11), referToEntry012(12), referToEntry013(13), referToEntry014(14), referToEntry015(15), referToEntry016(16), referToEntry017(17), referToEntry018(18), referToEntry019(19), referToEntry020(20), referToEntry021(21), referToEntry022(22), referToEntry023(23), referToEntry024(24), referToEntry025(25), referToEntry026(26), referToEntry027(27), referToEntry028(28), referToEntry029(29), referToEntry030(30), referToEntry031(31), referToEntry032(32), referToEntry033(33), referToEntry034(34), referToEntry035(35), referToEntry036(36), referToEntry037(37), referToEntry038(38), referToEntry039(39), referToEntry040(40), referToEntry041(41), referToEntry042(42), referToEntry043(43), referToEntry044(44), referToEntry045(45), referToEntry046(46), referToEntry047(47), referToEntry048(48), referToEntry049(49), referToEntry050(50), referToEntry051(51), referToEntry052(52), referToEntry053(53), referToEntry054(54), referToEntry055(55), referToEntry056(56), referToEntry057(57), referToEntry058(58), referToEntry059(59), referToEntry060(60), referToEntry061(61), referToEntry062(62), referToEntry063(63) } MultiPointer255 ::= BITS { null(0), referToEntry001(1), referToEntry002(2), referToEntry003(3), referToEntry004(4), referToEntry005(5), referToEntry006(6), referToEntry007(7), referToEntry008(8), referToEntry009(9), referToEntry010(10), referToEntry011(11), referToEntry012(12), referToEntry013(13), referToEntry014(14), referToEntry015(15), referToEntry016(16), referToEntry017(17), referToEntry018(18), referToEntry019(19), referToEntry020(20), referToEntry021(21), referToEntry022(22), referToEntry023(23), referToEntry024(24), referToEntry025(25), referToEntry026(26), referToEntry027(27), referToEntry028(28), referToEntry029(29), referToEntry030(30), referToEntry031(31), referToEntry032(32), referToEntry033(33), referToEntry034(34), referToEntry035(35), referToEntry036(36), referToEntry037(37), referToEntry038(38), referToEntry039(39), referToEntry040(40), referToEntry041(41), referToEntry042(42), referToEntry043(43), referToEntry044(44), referToEntry045(45), referToEntry046(46), referToEntry047(47), referToEntry048(48), referToEntry049(49), referToEntry050(50), referToEntry051(51), referToEntry052(52), referToEntry053(53), referToEntry054(54), referToEntry055(55), referToEntry056(56), referToEntry057(57), referToEntry058(58), referToEntry059(59), referToEntry060(60), referToEntry061(61), referToEntry062(62), referToEntry063(63), referToEntry064(64), referToEntry065(65), referToEntry066(66), referToEntry067(67), referToEntry068(68), referToEntry069(69), referToEntry070(70), referToEntry071(71), referToEntry072(72), referToEntry073(73), referToEntry074(74), referToEntry075(75), referToEntry076(76), referToEntry077(77), referToEntry078(78), referToEntry079(79), referToEntry080(80), referToEntry081(81), referToEntry082(82), referToEntry083(83), referToEntry084(84), referToEntry085(85), referToEntry086(86), referToEntry087(87), referToEntry088(88), referToEntry089(89), referToEntry090(90), referToEntry091(91), referToEntry092(92), referToEntry093(93), referToEntry094(94), referToEntry095(95), referToEntry096(96), referToEntry097(97), referToEntry098(98), referToEntry099(99), referToEntry100(100), referToEntry101(101), referToEntry102(102), referToEntry103(103), referToEntry104(104), referToEntry105(105), referToEntry106(106), referToEntry107(107), referToEntry108(108), referToEntry109(109), referToEntry110(110), referToEntry111(111), referToEntry112(112), referToEntry113(113), referToEntry114(114), referToEntry115(115), referToEntry116(116), referToEntry117(117), referToEntry118(118), referToEntry119(119), referToEntry120(120), referToEntry121(121), referToEntry122(122), referToEntry123(123), referToEntry124(124), referToEntry125(125), referToEntry126(126), referToEntry127(127), referToEntry128(128), referToEntry129(129), referToEntry130(130), referToEntry131(131), referToEntry132(132), referToEntry133(133), referToEntry134(134), referToEntry135(135), referToEntry136(136), referToEntry137(137), referToEntry138(138), referToEntry139(139), referToEntry140(140), referToEntry141(141), referToEntry142(142), referToEntry143(143), referToEntry144(144), referToEntry145(145), referToEntry146(146), referToEntry147(147), referToEntry148(148), referToEntry149(149), referToEntry150(150), referToEntry151(151), referToEntry152(152), referToEntry153(153), referToEntry154(154), referToEntry155(155), referToEntry156(156), referToEntry157(157), referToEntry158(158), referToEntry159(159), referToEntry160(160), referToEntry161(161), referToEntry162(162), referToEntry163(163), referToEntry164(164), referToEntry165(165), referToEntry166(166), referToEntry167(167), referToEntry168(168), referToEntry169(169), referToEntry170(170), referToEntry171(171), referToEntry172(172), referToEntry173(173), referToEntry174(174), referToEntry175(175), referToEntry176(176), referToEntry177(177), referToEntry178(178), referToEntry179(179), referToEntry180(180), referToEntry181(181), referToEntry182(182), referToEntry183(183), referToEntry184(184), referToEntry185(185), referToEntry186(186), referToEntry187(187), referToEntry188(188), referToEntry189(189), referToEntry190(190), referToEntry191(191), referToEntry192(192), referToEntry193(193), referToEntry194(194), referToEntry195(195), referToEntry196(196), referToEntry197(197), referToEntry198(198), referToEntry199(199), referToEntry200(200), referToEntry201(201), referToEntry202(202), referToEntry203(203), referToEntry204(204), referToEntry205(205), referToEntry206(206), referToEntry207(207), referToEntry208(208), referToEntry209(209), referToEntry210(210), referToEntry211(211), referToEntry212(212), referToEntry213(213), referToEntry214(214), referToEntry215(215), referToEntry216(216), referToEntry217(217), referToEntry218(218), referToEntry219(219), referToEntry220(220), referToEntry221(221), referToEntry222(222), referToEntry223(223), referToEntry224(224), referToEntry225(225), referToEntry226(226), referToEntry227(227), referToEntry228(228), referToEntry229(229), referToEntry230(230), referToEntry231(231), referToEntry232(232), referToEntry233(233), referToEntry234(234), referToEntry235(235), referToEntry236(236), referToEntry237(237), referToEntry238(238), referToEntry239(239), referToEntry240(240), referToEntry241(241), referToEntry242(242), referToEntry243(243), referToEntry244(244), referToEntry245(245), referToEntry246(246), referToEntry247(247), referToEntry248(248), referToEntry249(249), referToEntry250(250), referToEntry251(251), referToEntry252(252), referToEntry253(253), referToEntry254(254), referToEntry255(255) } -- This datatype always means that the MIB variable is -- a simple ENUM that when written to 'doActionRightNow', -- causes the described action to take place, (much like -- a button pressed in a UI). -- -- Such a value does NOT remain in state 'doActionRightNow' -- while the operation is in-process, but instead when read -- always returns 'idleState'. DoActionNow ::= INTEGER { doActionRightNow(1), idleState(2) } RadioType ::= INTEGER { radio802dot11A(1), radio802dot11B(2), radio802dot11G(3), radio802dot11FH(4), radio802dot11N(5) } -- Values of this type are passwords. They can be written, -- but when read, they return a 0-length string. Password ::= OCTET STRING (SIZE (0..255)) -- In order to make the switch's implementation of -- numerous tables simpler, tables using this datatype -- have a fixed number of entries with fixed indices. -- In such tables, no entries may be added or deleted, -- but the pre-existing rows can be enabled or disabled -- using the value declared with this datatype. StaticRowEnable ::= INTEGER { enable(1), disable(2) } PartsPer10k ::= Unsigned32 (0..10000) -- This datatype is used for all percentage values that have -- interesting tenths and hundreths, (such as 1.37%). SNMP -- cannot report decimals, only whole numbers. Values of -- this datatype are expressed not as parts-per-100, (percent), -- but as parts-per-10000. -- -- Said another way, values of this type are percent -- multiplied by 100. -- -- For example, 1.37% would be reported as 137. -- ScaleBy100 ::= Unsigned32 -- This datatype is used for all values that have interesting -- tenths and hundreths, (such as 2.48). SNMP cannot report -- decimals, only whole numbers. Values of this datatype are -- scaled (muliplied) by 100. -- -- For example, 2.48 would be reported as 248. -- In order to make the switch's implementation of some -- dynamic tables simpler, tables using this datatype -- use an abbreviated form of RowStatus. -- -- Only CreateAndGo and Destroy states are supported. -- -- On row creation, a single SET-PDU must contain all -- the required values, including this value set to -- createAndGo. (This greatly simplifies row validation -- for the switch). -- -- Setting this value to Destroy causes the corresponding -- row to be deleted. -- AbbrevRowStatus ::= INTEGER { createAndGo(4), destroy(6) } -- This datatype always means that the MIB variable is -- a simple ENUM that when written to 'doActionRightNow', -- causes the described action to take place, (much like -- a button pressed in a UI). -- -- Such a value DOES remain in state 'doActionRightNow' -- while the operation is in-process; when the operation is -- completed, it will then return the value 'idleState'. DoActionShowProgress ::= INTEGER { doActionRightNow(1), idleState(2) } -- Values of this type are keys, expressed in hexadecimal as -- a sequence of characters '0'..'9' plus 'A'..'F'. -- -- Unless otherwise noted, the default value for variables of -- this type is all-0s. -- -- Values of this type are passwords. They can be written, -- but when read, they return a 0-length string. HexPassword ::= OCTET STRING (SIZE (0..255)) TransmitRate ::= BITS { null(0), rate1Mb(1), rate2Mb(2), rate5pt5Mb(3), rate6Mb(4), rate9Mb(5), rate11Mb(6), rate12Mb(7), rate18Mb(8), rate22Mb(9), rate24Mb(10), rate36Mb(11), rate48Mb(12), rate54Mb(13) } -- This is a list of valid channels. -- For the 2.4 GHz band, we can use channels 1-14. -- For the 5.0 GHz band, we can use channels: -- 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, -- 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 AllowedChannels ::= INTEGER { channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), channel14(14), channel36(36), channel40(40), channel44(44), channel48(48), channel52(52), channel56(56), channel60(60), channel64(64), channel100(100), channel104(104), channel108(108), channel112(112), channel116(116), channel120(120), channel124(124), channel128(128), channel132(132), channel136(136), channel140(140), channel149(149), channel153(153), channel157(157), channel161(161), channel165(165) } -- -- Textual conventions -- RowStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of [2].) The status column has six defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - `notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except `notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: `notReady', `notInService' or `active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value `active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value `notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value `notReady'). NOTE WELL This textual convention may be used for a MIB table, irrespective of whether the values of that table's conceptual rows are able to be modified while it is active, or whether its conceptual rows must be taken out of service in order to be modified. That is, it is the responsibility of the DESCRIPTION clause of the status column to specify whether the status column must not be `active' in order for the value of some other column of the same conceptual row to be modified. If such a specification is made, affected columns may be changed by an SNMP set PDU if the RowStatus would not be equal to `active' either immediately before or after processing the PDU. In other words, if the PDU also contained a varbind that would change the RowStatus value, the column in question may be changed if the RowStatus was not equal to `active' as the PDU was received, or if the varbind sets the status to a value other than 'active'. Also note that whenever any elements of a row exist, the RowStatus column must also exist. To summarize the effect of having a conceptual row with a status column having a SYNTAX clause value of RowStatus, consider the following state diagram: STATE +--------------+-----------+-------------+------------- | A | B | C | D | |status col.|status column| |status column | is | is |status column ACTION |does not exist| notReady | notInService| is active --------------+--------------+-----------+-------------+------------- set status |noError ->D|inconsist- |inconsistent-|inconsistent- column to | or | entValue| Value| Value createAndGo |inconsistent- | | | | Value| | | --------------+--------------+-----------+-------------+------------- set status |noError see 1|inconsist- |inconsistent-|inconsistent- column to | or | entValue| Value| Value createAndWait |wrongValue | | | --------------+--------------+-----------+-------------+------------- set status |inconsistent- |inconsist- |noError |noError column to | Value| entValue| | active | | | | | | or | | | | | | | |see 2 ->D| ->D| ->D --------------+--------------+-----------+-------------+------------- set status |inconsistent- |inconsist- |noError |noError ->C column to | Value| entValue| | notInService | | | | | | or | | or | | | | | |see 3 ->C| ->C|wrongValue --------------+--------------+-----------+-------------+------------- set status |noError |noError |noError |noError column to | | | | destroy | ->A| ->A| ->A| ->A --------------+--------------+-----------+-------------+------------- set any other |see 4 |noError |noError |see 5 column to some| | | | value | | see 1| ->C| ->D --------------+--------------+-----------+-------------+------------- (1) goto B or C, depending on information available to the agent. (2) if other variable bindings included in the same PDU, provide values for all columns which are missing but required, then return noError and goto D. (3) if other variable bindings included in the same PDU, provide values for all columns which are missing but required, then return noError and goto C. (4) at the discretion of the agent, the return value may be either: inconsistentName: because the agent does not choose to create such an instance when the corresponding RowStatus instance does not exist, or inconsistentValue: if the supplied value is inconsistent with the state of some other MIB object's value, or noError: because the agent chooses to create the instance. If noError is returned, then the instance of the status column must also be created, and the new state is B or C, depending on the information available to the agent. If inconsistentName or inconsistentValue is returned, the row remains in state A. (5) depending on the MIB definition for the column/table, either noError or inconsistentValue may be returned. NOTE: Other processing of the set request may result in a response other than noError being returned, e.g., wrongValue, noCreation, etc. Conceptual Row Creation There are four potential interactions when creating a conceptual row: selecting an instance-identifier which is not in use; creating the conceptual row; initializing any objects for which the agent does not supply a default; and, making the conceptual row available for use by the managed device. Interaction 1: Selecting an Instance-Identifier The algorithm used to select an instance-identifier varies for each conceptual row. In some cases, the instance- identifier is semantically significant, e.g., the destination address of a route, and a management station selects the instance-identifier according to the semantics. In other cases, the instance-identifier is used solely to distinguish conceptual rows, and a management station without specific knowledge of the conceptual row might examine the instances present in order to determine an unused instance-identifier. (This approach may be used, but it is often highly sub-optimal; however, it is also a questionable practice for a naive management station to attempt conceptual row creation.) Alternately, the MIB module which defines the conceptual row might provide one or more objects which provide assistance in determining an unused instance-identifier. For example, if the conceptual row is indexed by an integer-value, then an object having an integer-valued SYNTAX clause might be defined for such a purpose, allowing a management station to issue a management protocol retrieval operation. In order to avoid unnecessary collisions between competing management stations, `adjacent' retrievals of this object should be different. Finally, the management station could select a pseudo-random number to use as the index. In the event that this index was already in use and an inconsistentValue was returned in response to the management protocol set operation, the management station should simply select a new pseudo-random number and retry the operation. A MIB designer should choose between the two latter algorithms based on the size of the table (and therefore the efficiency of each algorithm). For tables in which a large number of entries are expected, it is recommended that a MIB object be defined that returns an acceptable index for creation. For tables with small numbers of entries, it is recommended that the latter pseudo-random index mechanism be used. Interaction 2: Creating the Conceptual Row Once an unused instance-identifier has been selected, the management station determines if it wishes to create and activate the conceptual row in one transaction or in a negotiated set of interactions. Interaction 2a: Creating and Activating the Conceptual Row The management station must first determine the column requirements, i.e., it must determine those columns for which it must or must not provide values. Depending on the complexity of the table and the management station's knowledge of the agent's capabilities, this determination can be made locally by the management station. Alternately, the management station issues a management protocol get operation to examine all columns in the conceptual row that it wishes to create. In response, for each column, there are three possible outcomes: - a value is returned, indicating that some other management station has already created this conceptual row. We return to interaction 1. - the exception `noSuchInstance' is returned, indicating that the agent implements the object-type associated with this column, and that this column in at least one conceptual row would be accessible in the MIB view used by the retrieval were it to exist. For those columns to which the agent provides read-create access, the `noSuchInstance' exception tells the management station that it should supply a value for this column when the conceptual row is to be created. - the exception `noSuchObject' is returned, indicating that the agent does not implement the object-type associated with this column or that there is no conceptual row for which this column would be accessible in the MIB view used by the retrieval. As such, the management station can not issue any management protocol set operations to create an instance of this column. Once the column requirements have been determined, a management protocol set operation is accordingly issued. This operation also sets the new instance of the status column to `createAndGo'. When the agent processes the set operation, it verifies that it has sufficient information to make the conceptual row available for use by the managed device. The information available to the agent is provided by two sources: the management protocol set operation which creates the conceptual row, and, implementation-specific defaults supplied by the agent (note that an agent must provide implementation-specific defaults for at least those objects which it implements as read-only). If there is sufficient information available, then the conceptual row is created, a `noError' response is returned, the status column is set to `active', and no further interactions are necessary (i.e., interactions 3 and 4 are skipped). If there is insufficient information, then the conceptual row is not created, and the set operation fails with an error of `inconsistentValue'. On this error, the management station can issue a management protocol retrieval operation to determine if this was because it failed to specify a value for a required column, or, because the selected instance of the status column already existed. In the latter case, we return to interaction 1. In the former case, the management station can re-issue the set operation with the additional information, or begin interaction 2 again using `createAndWait' in order to negotiate creation of the conceptual row. NOTE WELL Regardless of the method used to determine the column requirements, it is possible that the management station might deem a column necessary when, in fact, the agent will not allow that particular columnar instance to be created or written. In this case, the management protocol set operation will fail with an error such as `noCreation' or `notWritable'. In this case, the management station decides whether it needs to be able to set a value for that particular columnar instance. If not, the management station re-issues the management protocol set operation, but without setting a value for that particular columnar instance; otherwise, the management station aborts the row creation algorithm. Interaction 2b: Negotiating the Creation of the Conceptual Row The management station issues a management protocol set operation which sets the desired instance of the status column to `createAndWait'. If the agent is unwilling to process a request of this sort, the set operation fails with an error of `wrongValue'. (As a consequence, such an agent must be prepared to accept a single management protocol set operation, i.e., interaction 2a above, containing all of the columns indicated by its column requirements.) Otherwise, the conceptual row is created, a `noError' response is returned, and the status column is immediately set to either `notInService' or `notReady', depending on whether it has sufficient information to make the conceptual row available for use by the managed device. If there is sufficient information available, then the status column is set to `notInService'; otherwise, if there is insufficient information, then the status column is set to `notReady'. Regardless, we proceed to interaction 3. Interaction 3: Initializing non-defaulted Objects The management station must now determine the column requirements. It issues a management protocol get operation to examine all columns in the created conceptual row. In the response, for each column, there are three possible outcomes: - a value is returned, indicating that the agent implements the object-type associated with this column and had sufficient information to provide a value. For those columns to which the agent provides read-create access (and for which the agent allows their values to be changed after their creation), a value return tells the management station that it may issue additional management protocol set operations, if it desires, in order to change the value associated with this column. - the exception `noSuchInstance' is returned, indicating that the agent implements the object-type associated with this column, and that this column in at least one conceptual row would be accessible in the MIB view used by the retrieval were it to exist. However, the agent does not have sufficient information to provide a value, and until a value is provided, the conceptual row may not be made available for use by the managed device. For those columns to which the agent provides read-create access, the `noSuchInstance' exception tells the management station that it must issue additional management protocol set operations, in order to provide a value associated with this column. - the exception `noSuchObject' is returned, indicating that the agent does not implement the object-type associated with this column or that there is no conceptual row for which this column would be accessible in the MIB view used by the retrieval. As such, the management station can not issue any management protocol set operations to create an instance of this column. If the value associated with the status column is `notReady', then the management station must first deal with all `noSuchInstance' columns, if any. Having done so, the value of the status column becomes `notInService', and we proceed to interaction 4. Interaction 4: Making the Conceptual Row Available Once the management station is satisfied with the values associated with the columns of the conceptual row, it issues a management protocol set operation to set the status column to `active'. If the agent has sufficient information to make the conceptual row available for use by the managed device, the management protocol set operation succeeds (a `noError' response is returned). Otherwise, the management protocol set operation fails with an error of `inconsistentValue'. NOTE WELL A conceptual row having a status column with value `notInService' or `notReady' is unavailable to the managed device. As such, it is possible for the managed device to create its own instances during the time between the management protocol set operation which sets the status column to `createAndWait' and the management protocol set operation which sets the status column to `active'. In this case, when the management protocol set operation is issued to set the status column to `active', the values held in the agent supersede those used by the managed device. If the management station is prevented from setting the status column to `active' (e.g., due to management station or network failure) the conceptual row will be left in the `notInService' or `notReady' state, consuming resources indefinitely. The agent must detect conceptual rows that have been in either state for an abnormally long period of time and remove them. It is the responsibility of the DESCRIPTION clause of the status column to indicate what an abnormally long period of time would be. This period of time should be long enough to allow for human response time (including `think time') between the creation of the conceptual row and the setting of the status to `active'. In the absense of such information in the DESCRIPTION clause, it is suggested that this period be approximately 5 minutes in length. This removal action applies not only to newly-created rows, but also to previously active rows which are set to, and left in, the notInService state for a prolonged period exceeding that which is considered normal for such a conceptual row. Conceptual Row Suspension When a conceptual row is `active', the management station may issue a management protocol set operation which sets the instance of the status column to `notInService'. If the agent is unwilling to do so, the set operation fails with an error of `wrongValue'. Otherwise, the conceptual row is taken out of service, and a `noError' response is returned. It is the responsibility of the DESCRIPTION clause of the status column to indicate under what circumstances the status column should be taken out of service (e.g., in order for the value of some other column of the same conceptual row to be modified). Conceptual Row Deletion For deletion of conceptual rows, a management protocol set operation is issued which sets the instance of the status column to `destroy'. This request may be made regardless of the current value of the status column (e.g., it is possible to delete conceptual rows which are either `notReady', `notInService' or `active'.) If the operation succeeds, then all instances associated with the conceptual row are immediately removed." SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) EthernetType ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x " STATUS current DESCRIPTION "Represents Ethernet Types." SYNTAX OCTET STRING (SIZE (2)) -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.388 symbol OBJECT IDENTIFIER ::= { enterprises 388 } -- !!- OID: .11 - as specified by Symbol MIB Admin. -- -- This sub-tree used for MIBs and sysOIDs produced -- by WSD, (Wireless Infrastructure Division, -- San Jose). -- -- 1.3.6.1.4.1.388.11 wsd OBJECT IDENTIFIER ::= { symbol 11 } -- This node reserved for sysOIDs of devices produced -- by WSD. -- -- 1.3.6.1.4.1.388.11.1 sysoids OBJECT IDENTIFIER ::= { wsd 1 } -- 1.3.6.1.4.1.388.11.1.2 ap5131 OBJECT-IDENTITY STATUS current DESCRIPTION "AP5131 with 1 WAN port, 1 LAN ports." ::= { sysoids 2 } -- 1.3.6.1.4.1.388.11.1.3 ap5181 OBJECT-IDENTITY STATUS current DESCRIPTION "AP5131 with 1 WAN port, 1 LAN ports, 533Mhz processor speed." ::= { sysoids 3 } -- 1.3.6.1.4.1.388.11.1.4 ap7131 OBJECT-IDENTITY STATUS current DESCRIPTION "AP7131" ::= { sysoids 4 } -- 1.3.6.1.4.1.388.11.1.5 ap7181 OBJECT-IDENTITY STATUS current DESCRIPTION "AP7181." ::= { sysoids 5 } -- 1.3.6.1.4.1.388.11.1.6 -- ap7131n OBJECT IDENTIFIER ::= { sysoids 6 } -- MIBs implemented by AP devices. -- -- All counter variables, under this tree node wrap in no less -- than 5.8 minutes, EXCEPT as noted below. (Be advised that -- all values referred to here as 'counters' are not -- necessarily of type Counter32 or Counter64; some are -- Unsigned32, and some Signal & Noise values are Integer32). -- -- Exception #1: for all values that count the number -- of tx/rx/both octets when the MAX number of Portals (12) -- are all running at a full 54Mb. In such cases, those -- counters could theoretically wrap in 0.8min. But, since -- 54Mb does not practically achieve 54Mb, this wrap time -- is more realistically at least 1-2min. If the switch does -- not have all 12 Portals, that wrap time would be even -- longer. -- -- Exception #2: there are three _SignalSum values, (Portal, -- MU, and WLAN); since Signal values range up to around -- -90dBm, they could theoretically wrap in 0.5min if the MAX -- number of Portals all had a full 54Mb of short packets -- flowing, all with _Signal values of around -100. Since you -- generally cannot communicate at 54Mb at -100dBm, this is -- not practially realistic. At more realistic levels, these -- values would wrap no faster than 1-2min, and verly likely -- no faster than 5min. -- -- (It was considered to increase the affected counters to -- 64bits, but given the difficulty implementing larger -- counters and the large number of values to change, as -- weighed against the REALISTIC wrap risk did not suggest -- doing this work). -- -- Given all this, a poll time of 5min, (or less), will -- basically ensure that no data is lost due to counter wrap. -- -- -- -- Numerous tables include _SumSquares values. These MIB -- variables are always the summation of the square of each -- individual value. These _SumSquares values can be used, -- (in conjunction with 'N' and _Sum), to calculate standard -- deviation, (a statistical measure of the variance of the -- data points). -- 1.3.6.1.4.1.388.11.3 abgAP OBJECT IDENTIFIER ::= { wsd 3 } -- 1.3.6.1.4.1.388.11.3.3 dot1x OBJECT IDENTIFIER ::= { abgAP 3 } -- 1.3.6.1.4.1.388.11.3.3.1 dot1xPaeAuthenticator OBJECT IDENTIFIER ::= { dot1x 1 } -- 1.3.6.1.4.1.388.11.3.3.1.1 dot1xAuthConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xAuthConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself. " ::= { dot1xPaeAuthenticator 1 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1 dot1xAuthConfigEntry OBJECT-TYPE SYNTAX Dot1xAuthConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration information for an Authenticator PAE. " INDEX { dot1xPaePortNumber } ::= { dot1xAuthConfigTable 1 } Dot1xAuthConfigEntry ::= SEQUENCE { dot1xPaePortNumber Integer32, dot1xPaeState INTEGER, dot1xAuthBackendAuthState INTEGER, dot1xAuthAdminControlledDirections Integer32, dot1xAuthOperControlledDirections Integer32, dot1xAuthAuthControlledPortStatus Integer32, dot1xAuthAuthControlledPortControl Integer32, dot1xAuthQuietPeriod Unsigned32, dot1xAuthTxPeriod Unsigned32, dot1xAuthSuppTimeout Unsigned32, dot1xAuthServerTimeout Unsigned32, dot1xAuthMaxReq Unsigned32, dot1xAuthReAuthPeriod Unsigned32, dot1xAuthReAuthEnabled TruthValue, dot1xAuthKeyTxEnabled TruthValue } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.1 dot1xPaePortNumber OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Port number associated with this Port." ::= { dot1xAuthConfigEntry 1 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.2 dot1xPaeState OBJECT-TYPE SYNTAX INTEGER { intialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the Authenticator PAE state machine. " ::= { dot1xAuthConfigEntry 2 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.3 dot1xAuthBackendAuthState OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Backend Authentication state machine. " ::= { dot1xAuthConfigEntry 3 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.4 dot1xAuthAdminControlledDirections OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the administrative controlled directions parameter for the Port." ::= { dot1xAuthConfigEntry 4 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.5 dot1xAuthOperControlledDirections OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the operational controlled directions parameter for the Port. " ::= { dot1xAuthConfigEntry 5 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.6 dot1xAuthAuthControlledPortStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the controlled Port status parameter for the Port. " ::= { dot1xAuthConfigEntry 6 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.7 dot1xAuthAuthControlledPortControl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the controlled Port control parameter for the Port. " ::= { dot1xAuthConfigEntry 7 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.8 dot1xAuthQuietPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine. " ::= { dot1xAuthConfigEntry 8 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.9 dot1xAuthTxPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. " ::= { dot1xAuthConfigEntry 9 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.10 dot1xAuthSuppTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. " ::= { dot1xAuthConfigEntry 10 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.11 dot1xAuthServerTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. " ::= { dot1xAuthConfigEntry 11 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.12 dot1xAuthMaxReq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the maxReq constant currently in use by the Backend Authentication state machine. " ::= { dot1xAuthConfigEntry 12 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.13 dot1xAuthReAuthPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. " ::= { dot1xAuthConfigEntry 13 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.14 dot1xAuthReAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The enable/disable control used by the Reauthentication Timer state machine" ::= { dot1xAuthConfigEntry 14 } -- 1.3.6.1.4.1.388.11.3.3.1.1.1.15 dot1xAuthKeyTxEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine." ::= { dot1xAuthConfigEntry 15 } -- 1.3.6.1.4.1.388.11.3.3.1.2 dot1xAuthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xAuthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. " ::= { dot1xPaeAuthenticator 2 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1 dot1xAuthStatsEntry OBJECT-TYPE SYNTAX Dot1xAuthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics information for an Authenticator PAE. " INDEX { dot1xPaePortNumber } ::= { dot1xAuthStatsTable 1 } Dot1xAuthStatsEntry ::= SEQUENCE { dot1xAuthEapolFramesRx Counter32, dot1xAuthEapolFramesTx Counter32, dot1xAuthEapolStartFramesRx Counter32, dot1xAuthEapolLogoffFramesRx Counter32, dot1xAuthEapolRespIdFramesRx Counter32, dot1xAuthEapolRespFramesRx Counter32, dot1xAuthEapolReqIdFramesTx Counter32, dot1xAuthEapolReqFramesTx Counter32, dot1xAuthInvalidEapolFramesRx Counter32, dot1xAuthEapLengthErrorFramesRx Counter32, dot1xAuthLastEapolFrameVersion OCTET STRING, dot1xAuthLastEapolFrameSource PhysAddress } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.1 dot1xAuthEapolFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by this Authenticator. " ::= { dot1xAuthStatsEntry 1 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.2 dot1xAuthEapolFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by this Authenticator. " ::= { dot1xAuthStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.3 dot1xAuthEapolStartFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by this Authenticator. " ::= { dot1xAuthStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.4 dot1xAuthEapolLogoffFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Logoff frames that have been received by this Authenticator. " ::= { dot1xAuthStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.5 dot1xAuthEapolRespIdFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Resp/Id frames that have been received by this Authenticator. " ::= { dot1xAuthStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.6 dot1xAuthEapolRespFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator. " ::= { dot1xAuthStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.7 dot1xAuthEapolReqIdFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Req/Id frames that have been transmitted by this Authenticator. " ::= { dot1xAuthStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.8 dot1xAuthEapolReqFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator. " ::= { dot1xAuthStatsEntry 8 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.9 dot1xAuthInvalidEapolFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized." ::= { dot1xAuthStatsEntry 9 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.10 dot1xAuthEapLengthErrorFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. " ::= { dot1xAuthStatsEntry 10 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.11 dot1xAuthLastEapolFrameVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol version number carried in the most recently received EAPOL frame. " ::= { dot1xAuthStatsEntry 11 } -- 1.3.6.1.4.1.388.11.3.3.1.2.1.12 dot1xAuthLastEapolFrameSource OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source MAC address carried in the most recently received EAPOL frame. " ::= { dot1xAuthStatsEntry 12 } -- 1.3.6.1.4.1.388.11.3.3.1.3 dot1xAuthDiagTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xAuthDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. " ::= { dot1xPaeAuthenticator 3 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1 dot1xAuthDiagEntry OBJECT-TYPE SYNTAX Dot1xAuthDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The diagnostics information for an Authenticator PAE. " INDEX { dot1xPaePortNumber } ::= { dot1xAuthDiagTable 1 } Dot1xAuthDiagEntry ::= SEQUENCE { dot1xAuthEntersConnecting Counter32, dot1xAuthEapLogoffsWhileConnecting Counter32, dot1xAuthEntersAuthenticating Counter32, dot1xAuthAuthSuccessWhileAuthenticating Counter32, dot1xAuthAuthTimeoutsWhileAuthenticating Counter32, dot1xAuthAuthFailWhileAuthenticating Counter32, dot1xAuthAuthReauthsWhileAuthenticating Counter32, dot1xAuthAuthEapStartsWhileAuthenticating Counter32, dot1xAuthAuthEapLogoffWhileAuthenticating Counter32, dot1xAuthAuthReauthsWhileAuthenticated Counter32, dot1xAuthAuthEapStartsWhileAuthenticated Counter32, dot1xAuthAuthEapLogoffWhileAuthenticated Counter32, dot1xAuthBackendResponses Counter32, dot1xAuthBackendAccessChallenges Counter32, dot1xAuthBackendOtherRequestsToSupplicant Counter32, dot1xAuthBackendNonNakResponsesFromSupplicant Counter32, dot1xAuthBackendAuthSuccesses Counter32, dot1xAuthBackendAuthFails Counter32 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.1 dot1xAuthEntersConnecting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions to the CONNECTING state from any other state. " ::= { dot1xAuthDiagEntry 1 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.2 dot1xAuthEapLogoffsWhileConnecting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message. " ::= { dot1xAuthDiagEntry 2 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.3 dot1xAuthEntersAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant. " ::= { dot1xAuthDiagEntry 3 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.4 dot1xAuthAuthSuccessWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE)." ::= { dot1xAuthDiagEntry 4 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.5 dot1xAuthAuthTimeoutsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE). " ::= { dot1xAuthDiagEntry 5 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.6 dot1xAuthAuthFailWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE). " ::= { dot1xAuthDiagEntry 6 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.7 dot1xAuthAuthReauthsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE). " ::= { dot1xAuthDiagEntry 7 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.8 dot1xAuthAuthEapStartsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant. " ::= { dot1xAuthDiagEntry 8 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.9 dot1xAuthAuthEapLogoffWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant. " ::= { dot1xAuthDiagEntry 9 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.10 dot1xAuthAuthReauthsWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE). " ::= { dot1xAuthDiagEntry 10 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.11 dot1xAuthAuthEapStartsWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant. " ::= { dot1xAuthDiagEntry 11 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.12 dot1xAuthAuthEapLogoffWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant. " ::= { dot1xAuthDiagEntry 12 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.13 dot1xAuthBackendResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server. " ::= { dot1xAuthDiagEntry 13 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.14 dot1xAuthBackendAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator. " ::= { dot1xAuthDiagEntry 14 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.15 dot1xAuthBackendOtherRequestsToSupplicant OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method." ::= { dot1xAuthDiagEntry 15 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.16 dot1xAuthBackendNonNakResponsesFromSupplicant OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method. " ::= { dot1xAuthDiagEntry 16 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.17 dot1xAuthBackendAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server. " ::= { dot1xAuthDiagEntry 17 } -- 1.3.6.1.4.1.388.11.3.3.1.3.1.18 dot1xAuthBackendAuthFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server. " ::= { dot1xAuthDiagEntry 18 } -- 1.3.6.1.4.1.388.11.3.3.1.4 dot1xAuthSessionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xAuthSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. " ::= { dot1xPaeAuthenticator 4 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1 dot1xAuthSessionStatsEntry OBJECT-TYPE SYNTAX Dot1xAuthSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active. " INDEX { dot1xPaePortNumber } ::= { dot1xAuthSessionStatsTable 1 } Dot1xAuthSessionStatsEntry ::= SEQUENCE { dot1xAuthSessionOctetsRx Counter32, dot1xAuthSessionOctetsTx Counter32, dot1xAuthSessionFramesRx Counter32, dot1xAuthSessionFramesTx Counter32, dot1xAuthSessionId OCTET STRING, dot1xAuthSessionAuthenticMethod INTEGER, dot1xAuthSessionTime TimeTicks, dot1xAuthSessionTerminateCause INTEGER, dot1xAuthSessionUserName OCTET STRING } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.1 dot1xAuthSessionOctetsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets received in user data frames on this Port during the session. " ::= { dot1xAuthSessionStatsEntry 1 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.2 dot1xAuthSessionOctetsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets transmitted in user data frames on this Port during the session. " ::= { dot1xAuthSessionStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.3 dot1xAuthSessionFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user data frames received on this Port during the session. " ::= { dot1xAuthSessionStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.4 dot1xAuthSessionFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user data frames transmitted on this Port during the session. " ::= { dot1xAuthSessionStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.5 dot1xAuthSessionId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the session, in the form of a printable ASCII string of at least three characters. " ::= { dot1xAuthSessionStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.6 dot1xAuthSessionAuthenticMethod OBJECT-TYPE SYNTAX INTEGER { remoteAuthServer(1), localAuthServer(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication method used to establish the session. " ::= { dot1xAuthSessionStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.7 dot1xAuthSessionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of the session in seconds. " ::= { dot1xAuthSessionStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.8 dot1xAuthSessionTerminateCause OBJECT-TYPE SYNTAX INTEGER { supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the session termination." ::= { dot1xAuthSessionStatsEntry 8 } -- 1.3.6.1.4.1.388.11.3.3.1.4.1.9 dot1xAuthSessionUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE. " ::= { dot1xAuthSessionStatsEntry 9 } -- 1.3.6.1.4.1.388.11.3.4 apRf OBJECT IDENTIFIER ::= { abgAP 4 } -- This group contains MIB values that describe the -- Portals known to and adopted by this AP. -- -- An Access Port will contain 1, 2, (and in the -- future, possibly more), 'Portals'. Such Portals -- may be thought of as the radio portion of an -- Access Port. -- -- Descriptions of each data item are only provided here in -- the Portal tables, (since it occurs first in the MIB). -- For the nearly identical values in the MU and WLAN tables, -- refer back to the descriptions found here. (Did this to -- avoid massive cut-and-paste which later leads to -- discrepencies and inconsistencies when changes are -- incorrectly made to the descriptions in one location but -- not the others). -- 1.3.6.1.4.1.388.11.3.4.1 apRadio OBJECT IDENTIFIER ::= { apRf 1 } -- 1.3.6.1.4.1.388.11.3.4.1.1 apRadioSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioSettingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Use apRadioSettingsTable to view and set the properties of the radios. " ::= { apRadio 1 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1 apRadioSettingsEntry OBJECT-TYPE SYNTAX ApRadioSettingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex } ::= { apRadioSettingsTable 1 } ApRadioSettingsEntry ::= SEQUENCE { apRadioSettingsIndex Integer32, apRadioSettingsEnable TruthValue, apRadioSettingsBand INTEGER, apRadioSettingsPointersToWlans MultiPointer63, apRadioSettingsName INTEGER, apRadioSettingsMacAddress PhysAddress, apRadioSettingsAntenna INTEGER, apRadioSettingsShortPreamble TruthValue, apRadioSettingsRtsThresh Integer32, apRadioSettingsBeaconInt Integer32, apRadioSettingsDtimPrd Integer32, apRadioSettingsBasicRates BITS, apRadioSettingsSupportedRates BITS, apRadioSettingsBGMode INTEGER, apRadioSettingsBackgroundMode TruthValue, apRadioSettingsBackgroundCwMin Integer32, apRadioSettingsBackgroundCwMax Integer32, apRadioSettingsBackgroundAifsn Integer32, apRadioSettingsBackgroundTxopsTime Integer32, apRadioSettingsBackgroundTxopsTimeInMS Integer32, apRadioSettingsBestEffortMode TruthValue, apRadioSettingsBestEffortCwMin Integer32, apRadioSettingsBestEffortCwMax Integer32, apRadioSettingsBestEffortAifsn Integer32, apRadioSettingsBestEffortTxopsTime Integer32, apRadioSettingsBestEffortTxopsTimeInMS Integer32, apRadioSettingsVideoMode TruthValue, apRadioSettingsVideoCwMin Integer32, apRadioSettingsVideoCwMax Integer32, apRadioSettingsVideoAifsn Integer32, apRadioSettingsVideoTxopsTime Integer32, apRadioSettingsVideoTxopsTimeInMS Integer32, apRadioSettingsVoiceMode TruthValue, apRadioSettingsVoiceCwMin Integer32, apRadioSettingsVoiceCwMax Integer32, apRadioSettingsVoiceAifsn Integer32, apRadioSettingsVoiceTxopsTime Integer32, apRadioSettingsVoiceTxopsTimeInMS Integer32, apRadioSettingsE2BMapMessage DisplayString, apRadioSettingsERPProtectionStatus TruthValue, apRadioSettingsWMMQosParam INTEGER, apRadioSettingsQBSSChannelBeaconInt Integer32, apRadioSettingsQBSSLoadElementMode INTEGER, apRadioSettingsTxPowerAntennaGain INTEGER, apRadioSettingsDynamicChainSelectEnable TruthValue } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.1 apRadioSettingsIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Simple index." ::= { apRadioSettingsEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.2 apRadioSettingsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Row enable. In case of APs with 802.11n radios, please use apRadioQuickSetup." ::= { apRadioSettingsEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.3 apRadioSettingsBand OBJECT-TYPE SYNTAX INTEGER { aRadio(1), bgRadio(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In a system that contains only 1 radio, Radio 1 can be configured for 802.11b/g or 802.11a. In a system that contains 2 radios, Radio 1 will be configured for 802.11b/g and Radio 2 will be configured for 802.11a regardless of the user setting. One will get a set-fail if attempts to make a change. Note that 'aRadio' means an 802.11a standard radio that uses the 5.0 GHz band, and, 'bgRadio' means an 802.11b and 802.11g standards radio that use the 2.4 GHz band. An 802.11n radio can use both 2.4 GHz and/or 5.0 GHz bands, so, both these values are applicable for an 802.11n radio. In case of APs with 802.11n radios, please use apRadioQuickSetup." ::= { apRadioSettingsEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.4 apRadioSettingsPointersToWlans OBJECT-TYPE SYNTAX MultiPointer63 MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar points to multiple WLANs that use this radio." ::= { apRadioSettingsEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.5 apRadioSettingsName OBJECT-TYPE SYNTAX INTEGER { radio802dt11a(1), radio802dt11bg(2), radio802dt11n2400MHz(3), radio802dt11n5000MHz(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Radio. Note that 'radio802dt11a' means an 802.11a standard radio that uses the 5GHz band, and, 'radio802dt11bg' means an 802.11b and 802.11g standards radio that use the 2.4 GHz band. An 802.11n radio can use both 2.4 GHz and/or 5.0 GHz bands, so, both these values are applicable for an 802.11n radio." ::= { apRadioSettingsEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.6 apRadioSettingsMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the radio." ::= { apRadioSettingsEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.7 apRadioSettingsAntenna OBJECT-TYPE SYNTAX INTEGER { fullDiversity(1), primaryOnly(2), secondaryOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The antenna diversity setting for the radio. Note that this setting does not apply for an 802.11n radio." ::= { apRadioSettingsEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.8 apRadioSettingsShortPreamble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable support for Short Preamble when MUs associate with the Access Point. Enabling Short Preamble may cause incompatibility with some older clients." ::= { apRadioSettingsEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.9 apRadioSettingsRtsThresh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Request To Send(RTS) threshold(in bytes) for use by the radio for the WLAN." ::= { apRadioSettingsEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.10 apRadioSettingsBeaconInt OBJECT-TYPE SYNTAX Integer32 (50..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (apRadioSettingDtimPrd) value, for example, 100 : 10. " ::= { apRadioSettingsEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.11 apRadioSettingsDtimPrd OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that this object's status is current for 802.11n radios, whereas it is obsolete for a/b/g radios." ::= { apRadioSettingsEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.12 apRadioSettingsBasicRates OBJECT-TYPE SYNTAX BITS { null(0), rate1Mb(1), rate2Mb(2), rate5pt5Mb(3), rate6Mb(4), rate9Mb(5), rate11Mb(6), rate12Mb(7), rate18Mb(8), rate22Mb(9), rate24Mb(10), rate36Mb(11), rate48Mb(12), rate54Mb(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "List of basic rates for the radio. Note that this setting does not apply for an 802.11n radio." ::= { apRadioSettingsEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.13 apRadioSettingsSupportedRates OBJECT-TYPE SYNTAX BITS { null(0), rate1Mb(1), rate2Mb(2), rate5pt5Mb(3), rate6Mb(4), rate9Mb(5), rate11Mb(6), rate12Mb(7), rate18Mb(8), rate22Mb(9), rate24Mb(10), rate36Mb(11), rate48Mb(12), rate54Mb(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "List of supported rates for the radio." ::= { apRadioSettingsEntry 13 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.14 apRadioSettingsBGMode OBJECT-TYPE SYNTAX INTEGER { modeBandG(1), modeG(2), modeB(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radio mode. Note that this setting does not apply for an 802.11n radio. Please use the object apRadioNSettingsMode under apRadioNSettingsTable for 802.11n radios." ::= { apRadioSettingsEntry 14 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.15 apRadioSettingsBackgroundMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This QOS parameter is used by the AP for the Background access category." ::= { apRadioSettingsEntry 15 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.16 apRadioSettingsBackgroundCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Background access category." ::= { apRadioSettingsEntry 16 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.17 apRadioSettingsBackgroundCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Background access category." ::= { apRadioSettingsEntry 17 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.18 apRadioSettingsBackgroundAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Background access category." ::= { apRadioSettingsEntry 18 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.19 apRadioSettingsBackgroundTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Background access category." ::= { apRadioSettingsEntry 19 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.20 apRadioSettingsBackgroundTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Background access category." ::= { apRadioSettingsEntry 20 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.21 apRadioSettingsBestEffortMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This QOS parameter is used by the AP for the Best Effort access category." ::= { apRadioSettingsEntry 21 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.22 apRadioSettingsBestEffortCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Best Effort access category." ::= { apRadioSettingsEntry 22 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.23 apRadioSettingsBestEffortCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Best Effort access category." ::= { apRadioSettingsEntry 23 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.24 apRadioSettingsBestEffortAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Best Effort access category." ::= { apRadioSettingsEntry 24 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.25 apRadioSettingsBestEffortTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Best Effort access category." ::= { apRadioSettingsEntry 25 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.26 apRadioSettingsBestEffortTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Best Effort access category." ::= { apRadioSettingsEntry 26 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.27 apRadioSettingsVideoMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This QOS parameter is used by the AP for the Video access category." ::= { apRadioSettingsEntry 27 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.28 apRadioSettingsVideoCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Video access category." ::= { apRadioSettingsEntry 28 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.29 apRadioSettingsVideoCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Video access category." ::= { apRadioSettingsEntry 29 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.30 apRadioSettingsVideoAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Video access category." ::= { apRadioSettingsEntry 30 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.31 apRadioSettingsVideoTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Video access category." ::= { apRadioSettingsEntry 31 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.32 apRadioSettingsVideoTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Video access category." ::= { apRadioSettingsEntry 32 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.33 apRadioSettingsVoiceMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This QOS parameter is used by the AP for the Voice access category." ::= { apRadioSettingsEntry 33 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.34 apRadioSettingsVoiceCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Voice access category." ::= { apRadioSettingsEntry 34 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.35 apRadioSettingsVoiceCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Voice access category." ::= { apRadioSettingsEntry 35 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.36 apRadioSettingsVoiceAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Voice access category." ::= { apRadioSettingsEntry 36 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.37 apRadioSettingsVoiceTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Voice access category." ::= { apRadioSettingsEntry 37 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.38 apRadioSettingsVoiceTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QOS parameter is used by the AP for the Voice access category." ::= { apRadioSettingsEntry 38 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.39 apRadioSettingsE2BMapMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Global ESS to BSS mapping status message." ::= { apRadioSettingsEntry 39 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.40 apRadioSettingsERPProtectionStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether ERP Protection is ON or OFF." ::= { apRadioSettingsEntry 40 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.41 apRadioSettingsWMMQosParam OBJECT-TYPE SYNTAX INTEGER { manual(1), wifi11agn(2), wifi11b(3), default11agn(4), default11b(5), voice11agn(6), voice11b(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Pre-Programmed WMM QOS Parameters. manual - Modify parameters wifi11agn - WiFi 11a/11g/11n defaults wifi11b - WiFi 11b defaults default11agn - Symbol 11a/11g/11n defaults default11b - Symbol 11b defaults voice11agn - Symbol 11a/11g/11n voice params voice11b - Symbol 11b voice params" ::= { apRadioSettingsEntry 41 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.42 apRadioSettingsQBSSChannelBeaconInt OBJECT-TYPE SYNTAX Integer32 (10..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Utilization Beacon Intervals for QBSS Load Element (802.11e)" ::= { apRadioSettingsEntry 42 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.43 apRadioSettingsQBSSLoadElementMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable QBSS Load Element." ::= { apRadioSettingsEntry 43 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.44 apRadioSettingsTxPowerAntennaGain OBJECT-TYPE SYNTAX INTEGER (0..1500) UNITS "0.1%" MAX-ACCESS read-write STATUS current DESCRIPTION "Tx power Antenna gain ranges from 0.0 to 15.0." ::= { apRadioSettingsEntry 44 } -- 1.3.6.1.4.1.388.11.3.4.1.1.1.45 apRadioSettingsDynamicChainSelectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Dynamic Chain Selection Mode." ::= { apRadioSettingsEntry 45 } -- 1.3.6.1.4.1.388.11.3.4.1.2 apRadioCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Use apRadioCfgTable to view and set the radio properties of the Access Points. The process can be broken down into the following steps: 1. Set apRadioCfgReset to TRUE. 2. Set apRadioCfgDesPlacement 3. Get apRadioCfgPosChannel 4. Set apRadioCfgDesChannel 5. Get apRadioCfgPosPowerLevel 6. Set apRadioCfgDesPowerLevel 7. Get apRadioCfgPowerInMW 8. Set and pull progress of apRadioCfgSet 9. Validate the configuration has been set by getting apRadioCfgPlacement apRadioCfgChannel apRadioCfgPowerLevel " ::= { apRadio 2 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1 apRadioCfgEntry OBJECT-TYPE SYNTAX ApRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex } ::= { apRadioCfgTable 1 } ApRadioCfgEntry ::= SEQUENCE { apRadioCfgChannelMode INTEGER, apRadioCfgDesPlacement INTEGER, apRadioCfgPosChannel BITS, apRadioCfgDesChannel INTEGER, apRadioCfgPosPowerLevel Integer32, apRadioCfgDesPowerLevel Integer32, apRadioCfgDesPowerInMW Integer32, apRadioCfgSet DoActionShowProgress, apRadioCfgReset DoActionShowProgress, apRadioCfgPlacement INTEGER, apRadioCfgChannel INTEGER, apRadioCfgPowerLevel Integer32, apRadioCfgPowerInMW Integer32, apRadioCfgRfFunction INTEGER, apRadioCfgExceptionChannel BITS, apRadioCfgMaxMus INTEGER, apRadioCfgBcMcTxControl INTEGER } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.1 apRadioCfgChannelMode OBJECT-TYPE SYNTAX INTEGER { userSelect(1), autoSelect(2), uniformSpreading(3), autoSelect40(4), uniformSpreading40(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Mode for the Radio. The user is allowed to enter the apRadioDesChannel value only if the Channel Mode is Set to userSelect. The values autoSelect40(4) and uniformSpreading40(5) are applicable only in case of 802.11n radios." ::= { apRadioCfgEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.2 apRadioCfgDesPlacement OBJECT-TYPE SYNTAX INTEGER { indoor(1), outdoor(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired placement for radio." ::= { apRadioCfgEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.3 apRadioCfgPosChannel OBJECT-TYPE SYNTAX BITS { null(0), bchannel01(1), bchannel02(2), bchannel03(3), bchannel04(4), bchannel05(5), bchannel06(6), bchannel07(7), bchannel08(8), bchannel09(9), bchannel10(10), bchannel11(11), bchannel12(12), bchannel13(13), bchannel14(14), achannel36(15), achannel40(16), achannel44(17), achannel48(18), achannel52(19), achannel56(20), achannel60(21), achannel64(22), achannel149(23), achannel153(24), achannel157(25), achannel161(26), achannel165(27) } MAX-ACCESS read-only STATUS current DESCRIPTION "The possible channels that can be set when placement = apRadioCfgDesPlacement." ::= { apRadioCfgEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.4 apRadioCfgDesChannel OBJECT-TYPE SYNTAX INTEGER { null(0), bchannel01(1), bchannel02(2), bchannel03(3), bchannel04(4), bchannel05(5), bchannel06(6), bchannel07(7), bchannel08(8), bchannel09(9), bchannel10(10), bchannel11(11), bchannel12(12), bchannel13(13), bchannel14(14), achannel36(36), achannel40(40), achannel44(44), achannel48(48), achannel52(52), achannel56(56), achannel60(60), achannel64(64), achannel149(149), achannel153(153), achannel157(157), achannel161(161), achannel165(165) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired channel for radio. Please do not use this object for an access point that supports 802.11n radio. Use apRadioNCfgDesChannel instead." ::= { apRadioCfgEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.5 apRadioCfgPosPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max possible power level (dBm) that can be set when channel= apRadioCfgDesChannel. The range is 4 to 23 dBm. Note: Power level allowed depends on radio type, channel and country of operation." ::= { apRadioCfgEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.6 apRadioCfgDesPowerLevel OBJECT-TYPE SYNTAX Integer32 (4..23) MAX-ACCESS read-write STATUS current DESCRIPTION "The desired power level (dBm) for radio. The following power levels are available 4dBm=3mW, 5dBm=3mW, 6dBm=4mW, 7dBm=5mW, 8dBm=6mW, 9dBm=8mW, 10dBm=10mW, 11dBm=13mW, 12dBm=16mW, 13dBm=20mW, 14dBm=25mW, 15dBm=32mW, 16dBm=40mW, 17dBm=50mW, 18dBm=63mW, 19dBm=79mW, 20dBm=100mW, 21dBm=126mW, 22dBm=159mW, 23dBm=200mW Note: Power level allowed depends on radio type, channel and country of operation." ::= { apRadioCfgEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.7 apRadioCfgDesPowerInMW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "apRadioCfgDesPowerLevel in mW." ::= { apRadioCfgEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.8 apRadioCfgSet OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION "Validate values in apRadioCfgDes_ fields. If it is a valid combination, configure the switch with this combination and set apRadioCfg_ to these values." ::= { apRadioCfgEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.9 apRadioCfgReset OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the following OIDs. apRadioCfgDesPlacement apRadioCfgDesChannel apRadioCfgDesPowerLevel apRadioCfgPosChannel apRadioCfgPosPowerLevel apRadioCfgPowerInMW " ::= { apRadioCfgEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.10 apRadioCfgPlacement OBJECT-TYPE SYNTAX INTEGER { indoor(1), outdoor(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The placement configuration for radio." ::= { apRadioCfgEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.11 apRadioCfgChannel OBJECT-TYPE SYNTAX INTEGER { null(0), bchannel01(1), bchannel02(2), bchannel03(3), bchannel04(4), bchannel05(5), bchannel06(6), bchannel07(7), bchannel08(8), bchannel09(9), bchannel10(10), bchannel11(11), achannel36(36), achannel40(40), achannel44(44), achannel48(48), achannel52(52), achannel56(56), achannel60(60), achannel64(64), achannel149(149), achannel153(153), achannel157(157), achannel161(161), achannel165(165) } MAX-ACCESS read-only STATUS current DESCRIPTION "The channel configuration for radio." ::= { apRadioCfgEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.12 apRadioCfgPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power level (dBm) configuration for radio." ::= { apRadioCfgEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.13 apRadioCfgPowerInMW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "apRadioCfgPowerLevel in mW." ::= { apRadioCfgEntry 13 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.14 apRadioCfgRfFunction OBJECT-TYPE SYNTAX INTEGER { wlan(1), wips(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "WLAN or WIPS sensor operation mode for the Radio. Please use apRadioQuickSetup." ::= { apRadioCfgEntry 14 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.15 apRadioCfgExceptionChannel OBJECT-TYPE SYNTAX BITS { null(0), bchannel01(1), bchannel02(2), bchannel03(3), bchannel04(4), bchannel05(5), bchannel06(6), bchannel07(7), bchannel08(8), bchannel09(9), bchannel10(10), bchannel11(11), bchannel12(12), bchannel13(13), bchannel14(14), achannel36(15), achannel40(16), achannel44(17), achannel48(18), achannel52(19), achannel56(20), achannel60(21), achannel64(22), achannel149(23), achannel153(24), achannel157(25), achannel161(26), achannel165(27) } MAX-ACCESS read-write STATUS current DESCRIPTION "The channels that will be excluded from scanning when channelMode is autoSelect." ::= { apRadioCfgEntry 15 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.16 apRadioCfgMaxMus OBJECT-TYPE SYNTAX INTEGER (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Mobile Units (MUs) allowed to be associated to this radio. The total number of MUs for the entire AP cannot exceed 127." ::= { apRadioCfgEntry 16 } -- 1.3.6.1.4.1.388.11.3.4.1.2.1.17 apRadioCfgBcMcTxControl OBJECT-TYPE SYNTAX INTEGER { optimizedForRange(0), optimizedForThroughput(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast Multicast Transmit control configuration." ::= { apRadioCfgEntry 17 } -- 1.3.6.1.4.1.388.11.3.4.1.3 apRadioWlanBssTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioWlanBssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of BSSIDs mapped to WLANs." ::= { apRadio 3 } -- 1.3.6.1.4.1.388.11.3.4.1.3.1 apRadioWlanBssEntry OBJECT-TYPE SYNTAX ApRadioWlanBssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex, apWlanIndex } ::= { apRadioWlanBssTable 1 } ApRadioWlanBssEntry ::= SEQUENCE { apRadioWlanBssid Integer32 } -- 1.3.6.1.4.1.388.11.3.4.1.3.1.1 apRadioWlanBssid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "BSSID assigned to this particular WLAN." ::= { apRadioWlanBssEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.4 apRadioBssTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioBssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Use apRadioBssTable to view and set the properties of the Bss's. " ::= { apRadio 4 } -- 1.3.6.1.4.1.388.11.3.4.1.4.1 apRadioBssEntry OBJECT-TYPE SYNTAX ApRadioBssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex, apRadioBssIndex } ::= { apRadioBssTable 1 } ApRadioBssEntry ::= SEQUENCE { apRadioBssIndex Integer32, apRadioBssPrimaryWlan Integer32, apRadioBssDtimPrd Integer32 } -- 1.3.6.1.4.1.388.11.3.4.1.4.1.1 apRadioBssIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " " ::= { apRadioBssEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.4.1.2 apRadioBssPrimaryWlan OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary WLAN used by the AP to send beacons." ::= { apRadioBssEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.4.1.3 apRadioBssDtimPrd OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that BSS DTIM period is not supported for 802.11n radios." ::= { apRadioBssEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.5 apRadioE2BMapStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioE2BMapStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describes the ESS to BSS mapping status." ::= { apRadio 5 } -- 1.3.6.1.4.1.388.11.3.4.1.5.1 apRadioE2BMapStatusEntry OBJECT-TYPE SYNTAX ApRadioE2BMapStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex, apWlanIndex } ::= { apRadioE2BMapStatusTable 1 } ApRadioE2BMapStatusEntry ::= SEQUENCE { apRadioE2BMapStatusBcMcEncCipher INTEGER, apRadioE2BMapStatus INTEGER, apRadioE2BMapStatusMessage DisplayString } -- 1.3.6.1.4.1.388.11.3.4.1.5.1.1 apRadioE2BMapStatusBcMcEncCipher OBJECT-TYPE SYNTAX INTEGER { open(1), wep64(2), wep128(3), keyguard(4), wpaTkip(5), wpa2Ccmp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Broadcast/Mulitcast Encryption cipher based on the ESS to BSS mapping." ::= { apRadioE2BMapStatusEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.5.1.2 apRadioE2BMapStatus OBJECT-TYPE SYNTAX INTEGER { good(1), warning(2), error(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ESS to BSS map status." ::= { apRadioE2BMapStatusEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.5.1.3 apRadioE2BMapStatusMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ESS to BSS map status message." ::= { apRadioE2BMapStatusEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.6 apRadioMesh OBJECT IDENTIFIER ::= { apRadio 6 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1 apRadioMeshTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioMeshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for MESH configuration for Radio." ::= { apRadioMesh 1 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1 apRadioMeshEntry OBJECT-TYPE SYNTAX ApRadioMeshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex } ::= { apRadioMeshTable 1 } ApRadioMeshEntry ::= SEQUENCE { apRadioMeshBaseBridgeMode TruthValue, apRadioMeshMaxClients Integer32, apRadioMeshClientBridgeMode TruthValue, apRadioMeshWlanPtr SinglePointer, apRadioMeshConnAutoSelect TruthValue, apRadioMeshTimeout INTEGER, apRadioMeshTimeoutValue INTEGER } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.1 apRadioMeshBaseBridgeMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MESH base bridge mode for radio." ::= { apRadioMeshEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.2 apRadioMeshMaxClients OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of MESH client bridges." ::= { apRadioMeshEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.3 apRadioMeshClientBridgeMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MESH client bridge mode for radio." ::= { apRadioMeshEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.4 apRadioMeshWlanPtr OBJECT-TYPE SYNTAX SinglePointer (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "MESH client bridge WLAN. For the value 0 there is no WLAN assigned for Client Bridge connection." ::= { apRadioMeshEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.5 apRadioMeshConnAutoSelect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the MESH Auto Connection Select Mode." ::= { apRadioMeshEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.6 apRadioMeshTimeout OBJECT-TYPE SYNTAX INTEGER { disabled(0), uplinkDetect(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mesh Timeout Status." ::= { apRadioMeshEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.1.6.1.1.7 apRadioMeshTimeoutValue OBJECT-TYPE SYNTAX INTEGER (45..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "If Mesh is not connected after Timeout period (in seconds), stop the AP from sending beacons." ::= { apRadioMeshEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.1.6.2 apRadioMeshAvailableConnTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioMeshAvailableConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Available Base Bridge MESH connections." ::= { apRadioMesh 2 } -- 1.3.6.1.4.1.388.11.3.4.1.6.2.1 apRadioMeshAvailableConnEntry OBJECT-TYPE SYNTAX ApRadioMeshAvailableConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex, apRadioMeshAvailableConnIndex } ::= { apRadioMeshAvailableConnTable 1 } ApRadioMeshAvailableConnEntry ::= SEQUENCE { apRadioMeshAvailableConnIndex Integer32, apRadioMeshAvailableConnMac PhysAddress, apRadioMeshAvailableConnChannel Integer32, apRadioMeshAvailableConnRssi Integer32 } -- 1.3.6.1.4.1.388.11.3.4.1.6.2.1.1 apRadioMeshAvailableConnIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apRadioMeshAvailableConnEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.6.2.1.2 apRadioMeshAvailableConnMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac Address of Available Base Bridge." ::= { apRadioMeshAvailableConnEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.6.2.1.3 apRadioMeshAvailableConnChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel of Available Base Bridge." ::= { apRadioMeshAvailableConnEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.6.2.1.4 apRadioMeshAvailableConnRssi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RSSI value of Available Base Bridge." ::= { apRadioMeshAvailableConnEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.6.3 apRadioMeshPreferredConnTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioMeshPreferredConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Preferred Base Bridge MESH connections." ::= { apRadioMesh 3 } -- 1.3.6.1.4.1.388.11.3.4.1.6.3.1 apRadioMeshPreferredConnEntry OBJECT-TYPE SYNTAX ApRadioMeshPreferredConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apRadioSettingsIndex, apRadioMeshPreferredConnIndex } ::= { apRadioMeshPreferredConnTable 1 } ApRadioMeshPreferredConnEntry ::= SEQUENCE { apRadioMeshPreferredConnIndex Integer32, apRadioMeshPreferredConnPriority Integer32, apRadioMeshPreferredConnMac PhysAddress, apRadioMeshPreferredConnRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.1.6.3.1.1 apRadioMeshPreferredConnIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apRadioMeshPreferredConnEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.6.3.1.2 apRadioMeshPreferredConnPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Preferred Base Bridge Priority." ::= { apRadioMeshPreferredConnEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.6.3.1.3 apRadioMeshPreferredConnMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Preferred Base Bridge MAC Address." ::= { apRadioMeshPreferredConnEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.6.3.1.4 apRadioMeshPreferredConnRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status used to add or delete entries." ::= { apRadioMeshPreferredConnEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.7 apRadioWlanBandwidthTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioWlanBandwidthEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table of Radio Wlan Bandwidth management." ::= { apRadio 7 } -- 1.3.6.1.4.1.388.11.3.4.1.7.1 apRadioWlanBandwidthEntry OBJECT-TYPE SYNTAX ApRadioWlanBandwidthEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " INDEX { apRadioSettingsIndex, apWlanIndex } ::= { apRadioWlanBandwidthTable 1 } ApRadioWlanBandwidthEntry ::= SEQUENCE { apRadioWlanWeight Integer32 } -- 1.3.6.1.4.1.388.11.3.4.1.7.1.1 apRadioWlanWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100. " ::= { apRadioWlanBandwidthEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.8 apRadioNSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioNSettingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table adds 802.11n specific settings for an 'n' radio in addition to the common settings under apRadioSettingsTable." ::= { apRadio 8 } -- 1.3.6.1.4.1.388.11.3.4.1.8.1 apRadioNSettingsEntry OBJECT-TYPE SYNTAX ApRadioNSettingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An 802.11n radio settings entry." INDEX { apRadioSettingsIndex } ::= { apRadioNSettingsTable 1 } ApRadioNSettingsEntry ::= SEQUENCE { apRadioNSettingsMode INTEGER, apRadioNSettingsHTProtectionStatus INTEGER, apRadioNSettingsBasicRates INTEGER } -- 1.3.6.1.4.1.388.11.3.4.1.8.1.1 apRadioNSettingsMode OBJECT-TYPE SYNTAX INTEGER { modeA(1), modeB(2), modeG(3), modeN2400MHz(4), modeN5000MHz(5), modeAandN(6), modeBandG(7), modeGandN(8), modeBGandN(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "The modes available for an 802.11n radio depend on the radio band. For 5.0 GHz (11an), the modes are: modeA modeN5000MHz modeAandN For 2.4 GHz (11bgn), the modes are: modeBGandN modeBandG modeGandN modeB modeG modeN2400MHz" ::= { apRadioNSettingsEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.8.1.2 apRadioNSettingsHTProtectionStatus OBJECT-TYPE SYNTAX INTEGER { pureHt(1), nonHtStaOnChannel(2), htWith20MHzOnlySta(3), nonHtStaAssociated(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a new setting for 802.11n radios that indicates the HT Protection Status. The possible values are: Pure HT (1) non-HT STA on Channel (2) HT with 20 MHz-only STA (3) non-HT STA associated (4)" ::= { apRadioNSettingsEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.8.1.3 apRadioNSettingsBasicRates OBJECT-TYPE SYNTAX INTEGER { rate1and2Mbps(1), rate1and2and5point5and11Mbps(2), rate1and2and5point5and11and6and12and24Mbps(3), rate6and12and24Mbps(4), rateMCS0to7(5), rate6and12and24MbpsandMCS0to7(6), rate1and2and5point5and11and6and12and24MbpsandMCS0to7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "For basic rate the following options are available: (1) 1 and 2 Mbps (2) 1, 2, 5.5 and 11 Mbps (3) 1, 2, 5.5, 11 and 6, 12, 24 Mbps (4) 6, 12 and 24 Mbps (5) MCS 0-7 (6) 6, 12 and 24 Mbps and MCS 0-7 (7) 1, 2, 5.5, 11 and 6, 12, 24 Mbps and MCS 0-7" ::= { apRadioNSettingsEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.9 apRadioNCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioNCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apRadio 9 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1 apRadioNCfgEntry OBJECT-TYPE SYNTAX ApRadioNCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apRadioSettingsIndex } ::= { apRadioNCfgTable 1 } ApRadioNCfgEntry ::= SEQUENCE { apRadioNCfgPosChannel BITS, apRadioNCfgDesChannel AllowedChannels, apRadioNCfgChannel INTEGER, apRadioNCfgChannelWidth INTEGER, apRadioNCfgAmsduAggregationMaxRecvSize INTEGER, apRadioNCfgAmsduTransmitEnabled TruthValue, apRadioNCfgAmpduAggregationMaxRecvSize INTEGER, apRadioNCfgAmpduAggregationDensity INTEGER, apRadioNCfgAmpduTransmitSizeLimit INTEGER, apRadioNCfgShortGuardInterval TruthValue, apRadioNCfgAmpduTransmitEnabled TruthValue, apRadioNCfgChannelOffset INTEGER } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.1 apRadioNCfgPosChannel OBJECT-TYPE SYNTAX BITS { null(0), bgnChannel1(1), bgnChannel2(2), bgnChannel3(3), bgnChannel4(4), bgnChannel5(5), bgnChannel6(6), bgnChannel7(7), bgnChannel8(8), bgnChannel9(9), bgnChannel10(10), bgnChannel11(11), bgnChannel12(12), bgnChannel13(13), bgnChannel14(14), anChannel36(15), anChannel40(16), anChannel44(17), anChannel48(18), anChannel52(19), anChannel56(20), anChannel60(21), anChannel64(22), anChannel100(23), anChannel104(24), anChannel108(25), anChannel112(26), anChannel116(27), anChannel120(28), anChannel124(29), anChannel128(30), anChannel132(31), anChannel136(32), anChannel140(33), anChannel149(34), anChannel153(35), anChannel157(36), anChannel161(37), anChannel165(38) } MAX-ACCESS read-only STATUS current DESCRIPTION "The possible channels that can be set when placement = apRadioCfgDesPlacement" ::= { apRadioNCfgEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.2 apRadioNCfgDesChannel OBJECT-TYPE SYNTAX AllowedChannels MAX-ACCESS read-write STATUS current DESCRIPTION "The desired channel for the 'n' radio. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)" ::= { apRadioNCfgEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.3 apRadioNCfgChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The channel configuration for the 'n' radio." ::= { apRadioNCfgEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.4 apRadioNCfgChannelWidth OBJECT-TYPE SYNTAX INTEGER { twentyMHz(1), dynamic(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this value is set to twentyMhz, the AP works on 20MHz mode for both transmit and receive operations. dynamic: The 20/40 MHz operation is a dynamic feature in which the AP can receive packets from clients that use 20 MHz of bandwidth while transmitting a packet OR that use 40 MHz of bandwidth while transmitting a packet. Likewise, the AP can send packets either with a bandwidth of 20 or 40 MHz. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)" ::= { apRadioNCfgEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.5 apRadioNCfgAmsduAggregationMaxRecvSize OBJECT-TYPE SYNTAX INTEGER { size3965(3965) } UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The AP will always be enabled to receive AMSDU frames. The AMSDU limit is fixed at 3965 bytes. This value will be advertised in the HT Capabilities element." ::= { apRadioNCfgEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.6 apRadioNCfgAmsduTransmitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to TRUE, it enables the transmission of AMSDU frames. Setting it to FALSE disables AMSDU transmission." ::= { apRadioNCfgEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.7 apRadioNCfgAmpduAggregationMaxRecvSize OBJECT-TYPE SYNTAX INTEGER { size0(0), size8191(8191), size16383(16383), size32767(32767), size65535(65535) } UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "This value is used to tell other stations the maximum length AMPDU that they can send. The allowed values are: 0 bytes (special case, to disable AMPDU rx-limit). 8191 bytes 16383 bytes 32767 bytes 65535 bytes." ::= { apRadioNCfgEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.8 apRadioNCfgAmpduAggregationDensity OBJECT-TYPE SYNTAX INTEGER { zero(0), onefourth(250), onehalf(500), one(1000), two(2000), four(4000), eight(8000) } UNITS "nanoseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the AMPDU density which controls how close together the MPDU’s are within the AMPDU. The choices are: 0 (none), 1/4 usec, 1/2 usec, 1 usec, 2 usec, 4 usec and 8 usec. Since SNMP cannot represent fractions or decimals, the enumerations are given multiplied by 1000 i.e. in nanoseconds." ::= { apRadioNCfgEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.9 apRadioNCfgAmpduTransmitSizeLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a threshold that controls when the AP will setup a Block ACK agreement with a client to begin aggregating, that is, sending A-MPDU frames, to that client. It takes a range from 0-65535 bytes. " ::= { apRadioNCfgEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.10 apRadioNCfgShortGuardInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is a boolean. The 802.11n AP has an option to configure short guard interval(SGI). The possible values of guard interval are 400ns or 800ns. When the user turns SGI on, both 400ns and 800ns will be enabled together. When the user turns SGI off, only 800ns will be enabled. " ::= { apRadioNCfgEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.11 apRadioNCfgAmpduTransmitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to TRUE it enables the transmission of AMPDU frames. Setting it to FALSE disable AMPDU transmission." ::= { apRadioNCfgEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.1.9.1.12 apRadioNCfgChannelOffset OBJECT-TYPE SYNTAX INTEGER { none(1), above(2), below(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The channel offset. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)" ::= { apRadioNCfgEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.1.10 apRadioNMcsRateTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadioNMcsRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AP with the 802.11n radio supports modulation coding schemes (MCS) 0-15. This maps to the table entries 1-16. To the user, this is part of the Set Rates function." ::= { apRadio 10 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1 apRadioNMcsRateEntry OBJECT-TYPE SYNTAX ApRadioNMcsRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry which gives the MCS supported by an 'n' radio in the AP." INDEX { apRadioSettingsIndex, apRadioNMcsRateIndex } ::= { apRadioNMcsRateTable 1 } ApRadioNMcsRateEntry ::= SEQUENCE { apRadioNMcsRateIndex INTEGER, apRadioNMcsRate20MHzChanSgiDisabled Integer32, apRadioNMcsRate20MHzChanSgiEnabled Integer32, apRadioNMcsRate40MHzChanSgiDisabled Integer32, apRadioNMcsRate40MHzChanSgiEnabled Integer32, apRadioNMcsRateType INTEGER, apRadioNMcsRateEnabled TruthValue } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.1 apRadioNMcsRateIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "MCS index, from 1-16, corresponding to schemes 0-15." ::= { apRadioNMcsRateEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.2 apRadioNMcsRate20MHzChanSgiDisabled OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate on 20MHz channel with SGI disabled" ::= { apRadioNMcsRateEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.3 apRadioNMcsRate20MHzChanSgiEnabled OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Rate on 20MHz channel with SGI enabled" ::= { apRadioNMcsRateEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.4 apRadioNMcsRate40MHzChanSgiDisabled OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate on 40MHz channel with SGI disabled" ::= { apRadioNMcsRateEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.5 apRadioNMcsRate40MHzChanSgiEnabled OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate on 40MHz channel with SGI enabled." ::= { apRadioNMcsRateEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.6 apRadioNMcsRateType OBJECT-TYPE SYNTAX INTEGER { basic(1), supported(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether this MCS rate is basic or supported." ::= { apRadioNMcsRateEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.1.10.1.7 apRadioNMcsRateEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether this MCS is disabled (false), or, enabled (true) for this 'n' radio." ::= { apRadioNMcsRateEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.1.12 apRadioQuickSetup OBJECT-TYPE SYNTAX INTEGER { abgnWlanAndSensor(1), bgnWlanAndSensor(2), anWlanAndSensor(3), abgnWlanOnlyNoSensor(4), sensorOnlySpectrumAnalysisModeNoWlan(5), bgnWlanNoSensor(6), anWlanNoSensor(7), radiosOff(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The quick-setup options that can be selected to speedily set the function on one or more radios on the AP. Note that quick-setup option abgnWlanAndSensor(1) is available only in the tri-radio SKU. The two-radio SKU permits only options 2 through 8. The single-radio SKU permits only options 5 through 8. Note also that the setting of some of the options may fail due to the power management configuration being inconsistent with the minimum power requirements for those options." ::= { apRadio 12 } -- 1.3.6.1.4.1.388.11.3.4.1.13 apRadioSensorOnlyModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable state for the Sensor Only mode." ::= { apRadio 13 } -- This group describes all wireless LANs on the switch, -- and their corresponding security settings. -- 1.3.6.1.4.1.388.11.3.4.2 apWlan OBJECT IDENTIFIER ::= { apRf 2 } -- 1.3.6.1.4.1.388.11.3.4.2.1 apWlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of wireless LANs configured on the AP." ::= { apWlan 1 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1 apWlanEntry OBJECT-TYPE SYNTAX ApWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanIndex } ::= { apWlanTable 1 } ApWlanEntry ::= SEQUENCE { apWlanIndex Integer32, apWlanName DisplayString, apWlanEssid DisplayString, apWlanUseRadio INTEGER, apWlanMaxMus Integer32, apWlanAclPolicy SinglePointer, apWlanSecurityPolicy SinglePointer, apWlanQosPolicy SinglePointer, apWlanAuthKerberosUsername DisplayString, apWlanAuthKerberosPassword Password, apWlanDisallowMuToMu TruthValue, apWlanUseSecureBeacon TruthValue, apWlanAnswerBroadcastEss TruthValue, apWlanWeight Integer32, apWlanVlanMode INTEGER, apWlanVlanId SinglePointer, apWlanSubnet INTEGER, apWlanClientBackHaul TruthValue, apWlanHotspot TruthValue, apWlanEnable TruthValue, apWlanMuIdleTimeout INTEGER, apWlanRateLimitEnabled TruthValue, apWlanRateLimitWiredToWireless INTEGER, apWlanRateLimitWirelessToWired INTEGER } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.1 apWlanIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apWlanEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.2 apWlanName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the WLAN." ::= { apWlanEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.3 apWlanEssid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "ESSID of the WLAN." ::= { apWlanEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.4 apWlanUseRadio OBJECT-TYPE SYNTAX INTEGER { noneBand(0), bgRadio(1), aRadio(2), bothBand(3), nRadio2400MHz(4), nRadio5000MHz(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use either 802.11a radio or 802.11b/g radio, or, for 802.11n radios, select the frequency band i.e. 2.4 GHz or 5.0 GHz." ::= { apWlanEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.5 apWlanMaxMus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of MU associations is allowed for the WLAN. The total number of MUs for the entire AP cannot exceed 127." ::= { apWlanEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.6 apWlanAclPolicy OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Point to the ACL policy used for this WLAN." ::= { apWlanEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.7 apWlanSecurityPolicy OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Point to the Security policy used for this WLAN." ::= { apWlanEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.8 apWlanQosPolicy OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Point to the QOS policy used for this WLAN." ::= { apWlanEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.9 apWlanAuthKerberosUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Kerberos Username which is the same as the ESSID if the WLAN uses Kerberos Authentication" ::= { apWlanEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.10 apWlanAuthKerberosPassword OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Kerberos Password for authenticating the AP to the KDC." ::= { apWlanEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.11 apWlanDisallowMuToMu OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set to true to prohibit MU-to-MU communication." ::= { apWlanEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.12 apWlanUseSecureBeacon OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Secure Beacon checkbox to disallow the Access Point from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping into the WLAN. Consider this security measure for a private, corporate network." ::= { apWlanEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.13 apWlanAnswerBroadcastEss OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Answer broadcast ESS." ::= { apWlanEntry 13 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.14 apWlanWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100. " ::= { apWlanEntry 14 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.15 apWlanVlanMode OBJECT-TYPE SYNTAX INTEGER { modeDynamic(1), modeStatic(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN mode can either Dynamic or Static." ::= { apWlanEntry 15 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.16 apWlanVlanId OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Point to the VLAN id corresponding to WLAN." ::= { apWlanEntry 16 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.17 apWlanSubnet OBJECT-TYPE SYNTAX INTEGER { lan1(1), lan2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The LAN to which a WLAN is mapped." ::= { apWlanEntry 17 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.18 apWlanClientBackHaul OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MESH Client Backhaul on this WLAN." ::= { apWlanEntry 18 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.19 apWlanHotspot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable Hotspot functionality on this WLAN." ::= { apWlanEntry 19 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.20 apWlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Row enable/disable." ::= { apWlanEntry 20 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.21 apWlanMuIdleTimeout OBJECT-TYPE SYNTAX INTEGER (1..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum MU idle time in minutes." ::= { apWlanEntry 21 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.22 apWlanRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables rate limiting for this WLAN." ::= { apWlanEntry 22 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.23 apWlanRateLimitWiredToWireless OBJECT-TYPE SYNTAX INTEGER (100..300000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the per-MU maximum bandwidth allocated for wired to wireless traffic, in kbps." DEFVAL { 1000 } ::= { apWlanEntry 23 } -- 1.3.6.1.4.1.388.11.3.4.2.1.1.24 apWlanRateLimitWirelessToWired OBJECT-TYPE SYNTAX INTEGER (100..300000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the per-MU maximum bandwidth allocated for wireless to wired traffic, in kbps." DEFVAL { 1000 } ::= { apWlanEntry 24 } -- 1.3.6.1.4.1.388.11.3.4.2.2 apWlanSecPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanSecPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Security Policy that can be used by different WLANs." ::= { apWlan 2 } -- 1.3.6.1.4.1.388.11.3.4.2.2.1 apWlanSecPolicyEntry OBJECT-TYPE SYNTAX ApWlanSecPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanSecPolicyTable 1 } ApWlanSecPolicyEntry ::= SEQUENCE { apWlanSecPolicyIndex Integer32, apWlanSecPolicyName DisplayString, apWlanSecPolicyAuthentication INTEGER, apWlanSecPolicyEncryption INTEGER, apWlanSecPolicyPointerToWlan MultiPointer63, apWlanSecPolicyRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.2.2.1.1 apWlanSecPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apWlanSecPolicyEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.2.1.2 apWlanSecPolicyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of security policy." ::= { apWlanSecPolicyEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.2.1.3 apWlanSecPolicyAuthentication OBJECT-TYPE SYNTAX INTEGER { authNone(1), auth802dot1xEap(2), authKerberos(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the apWlanAuthEapTable. Likewise, if authKerberos, use the settings in the matching entry in the apWlanAuthKerberosTable." ::= { apWlanSecPolicyEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.2.1.4 apWlanSecPolicyEncryption OBJECT-TYPE SYNTAX INTEGER { cryptoNone(1), cryptoWep40(2), cryptoWep128(3), cryptoKeyguardMcm(4), cryptoWpaTkip(5), cryptoCcmp(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "If cryptoWep40 or cryptoWep128, additional WEP settings for this WLAN will be used from the matching entry in the apWlanCryptoWepTable. Likewise, if cryptoWpaTkip, use the settings in the matching entry in the apWlanCryptoTkipTable. Likewise, if cryptoKeyguardMcm, use the settings in the matching entry in the apWlanCryptoKeyguardTable. Likewise, if cryptoCcmp, use the settings in the matching entry in the apWlanCryptoCcmpTable." ::= { apWlanSecPolicyEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.2.1.5 apWlanSecPolicyPointerToWlan OBJECT-TYPE SYNTAX MultiPointer63 MAX-ACCESS read-only STATUS current DESCRIPTION "Points to the WLAN which have this particular security policy." ::= { apWlanSecPolicyEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.2.1.6 apWlanSecPolicyRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status used for Creation or Deletion." ::= { apWlanSecPolicyEntry 6 } -- This group contains authentication settings for all -- WLANs. -- 1.3.6.1.4.1.388.11.3.4.2.3 apWlanAuth OBJECT IDENTIFIER ::= { apWlan 3 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1 apWlanAuthEapTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanAuthEapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of EAP authentication settings for each Security Policy using this method." ::= { apWlanAuth 1 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1 apWlanAuthEapEntry OBJECT-TYPE SYNTAX ApWlanAuthEapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanAuthEapTable 1 } ApWlanAuthEapEntry ::= SEQUENCE { apWlanAuthEapReauthenticationEnable TruthValue, apWlanAuthEapReauthenticationPeriod Unsigned32, apWlanAuthEapReauthenticationMaxRetries Unsigned32, apWlanAuthEapRadius1Server IpAddress, apWlanAuthEapRadius1Port Unsigned32, apWlanAuthEapRadius1SharedSecret Password, apWlanAuthEapRadius2Server IpAddress, apWlanAuthEapRadius2Port Unsigned32, apWlanAuthEapRadius2SharedSecret Password, apWlanAuthEapMuQuietPeriod Unsigned32, apWlanAuthEapMuTimeout Unsigned32, apWlanAuthEapMuTxPeriod Unsigned32, apWlanAuthEapMuMaxRetries Unsigned32, apWlanAuthEapServerTimeout Unsigned32, apWlanAuthEapServerMaxRetries Unsigned32, apWlanAuthEapRadiusAcctMode TruthValue, apWlanAuthEapRadiusAcctMuTimeout Unsigned32, apWlanAuthEapRadiusAcctMuRetries Unsigned32, apWlanAuthEapSyslogMode TruthValue, apWlanAuthEapSyslogServerIp IpAddress, apWlanAuthEapRadiusExtAcctServer IpAddress, apWlanAuthEapRadiusExtPort Unsigned32, apWlanAuthEapRadiusExtSharedSecret Password } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.1 apWlanAuthEapReauthenticationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable reauthentication." ::= { apWlanAuthEapEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.2 apWlanAuthEapReauthenticationPeriod OBJECT-TYPE SYNTAX Unsigned32 (30..9999) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Reauthentication period." ::= { apWlanAuthEapEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.3 apWlanAuthEapReauthenticationMaxRetries OBJECT-TYPE SYNTAX Unsigned32 (1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Reauthentication max retries." ::= { apWlanAuthEapEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.4 apWlanAuthEapRadius1Server OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the primary RADIUS server. Use 127.0.0.1 to use the Local Radius Server on the AP." ::= { apWlanAuthEapEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.5 apWlanAuthEapRadius1Port OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the primary RADIUS server." ::= { apWlanAuthEapEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.6 apWlanAuthEapRadius1SharedSecret OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the primary RADIUS server." ::= { apWlanAuthEapEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.7 apWlanAuthEapRadius2Server OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the secondary RADIUS server. Use 127.0.0.1 to use the Local Radius Server on the AP." ::= { apWlanAuthEapEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.8 apWlanAuthEapRadius2Port OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the secondary RADIUS server." ::= { apWlanAuthEapEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.9 apWlanAuthEapRadius2SharedSecret OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the secondary RADIUS server." ::= { apWlanAuthEapEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.10 apWlanAuthEapMuQuietPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "MU quiet period." ::= { apWlanAuthEapEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.11 apWlanAuthEapMuTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "MU timeout." ::= { apWlanAuthEapEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.12 apWlanAuthEapMuTxPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "MU Tx period." ::= { apWlanAuthEapEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.13 apWlanAuthEapMuMaxRetries OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "MU max retries." ::= { apWlanAuthEapEntry 13 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.14 apWlanAuthEapServerTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Server timeout." ::= { apWlanAuthEapEntry 14 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.15 apWlanAuthEapServerMaxRetries OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Server max retries." ::= { apWlanAuthEapEntry 15 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.16 apWlanAuthEapRadiusAcctMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Accounting Mode." ::= { apWlanAuthEapEntry 16 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.17 apWlanAuthEapRadiusAcctMuTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Accounting MU Timeout value" ::= { apWlanAuthEapEntry 17 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.18 apWlanAuthEapRadiusAcctMuRetries OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Accounting Number of MU Retries." ::= { apWlanAuthEapEntry 18 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.19 apWlanAuthEapSyslogMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Syslogging Mode." ::= { apWlanAuthEapEntry 19 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.20 apWlanAuthEapSyslogServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog Server IP Address." ::= { apWlanAuthEapEntry 20 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.21 apWlanAuthEapRadiusExtAcctServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "External Radius Accounting Server IP Address." ::= { apWlanAuthEapEntry 21 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.22 apWlanAuthEapRadiusExtPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the external RADIUS server." ::= { apWlanAuthEapEntry 22 } -- 1.3.6.1.4.1.388.11.3.4.2.3.1.1.23 apWlanAuthEapRadiusExtSharedSecret OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the external RADIUS server." ::= { apWlanAuthEapEntry 23 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2 apWlanAuthKerberosTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanAuthKerberosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Kerberos authentication settings for each Security Policy using this method." ::= { apWlanAuth 2 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1 apWlanAuthKerberosEntry OBJECT-TYPE SYNTAX ApWlanAuthKerberosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanAuthKerberosTable 1 } ApWlanAuthKerberosEntry ::= SEQUENCE { apWlanAuthKerberosRealmName DisplayString, apWlanAuthKerberosKdcServerIp1 IpAddress, apWlanAuthKerberosKdcPort1 Unsigned32, apWlanAuthKerberosKdcServerIp2 IpAddress, apWlanAuthKerberosKdcPort2 Unsigned32, apWlanAuthKerberosKdcServerIpR IpAddress, apWlanAuthKerberosKdcPortR Unsigned32 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.1 apWlanAuthKerberosRealmName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Realm name." ::= { apWlanAuthKerberosEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.2 apWlanAuthKerberosKdcServerIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary KDC server IP addr." ::= { apWlanAuthKerberosEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.3 apWlanAuthKerberosKdcPort1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Primary KDC port." ::= { apWlanAuthKerberosEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.4 apWlanAuthKerberosKdcServerIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Backup KDC server IP addr." ::= { apWlanAuthKerberosEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.5 apWlanAuthKerberosKdcPort2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Backup KDC port." ::= { apWlanAuthKerberosEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.6 apWlanAuthKerberosKdcServerIpR OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Remote KDC server IP addr." ::= { apWlanAuthKerberosEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.3.2.1.7 apWlanAuthKerberosKdcPortR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Remote KDC port." ::= { apWlanAuthKerberosEntry 7 } -- This group contains encryption settings for all WLANs. -- 1.3.6.1.4.1.388.11.3.4.2.4 apWlanCrypto OBJECT IDENTIFIER ::= { apWlan 4 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1 apWlanCryptoWepTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanCryptoWepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of WEP encryption settings for each Security Policy using this method." ::= { apWlanCrypto 1 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1 apWlanCryptoWepEntry OBJECT-TYPE SYNTAX ApWlanCryptoWepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanCryptoWepTable 1 } ApWlanCryptoWepEntry ::= SEQUENCE { apWlanCryptoWepPassKey Password, apWlanCryptoWepKey1 OCTET STRING, apWlanCryptoWepKey2 OCTET STRING, apWlanCryptoWepKey3 OCTET STRING, apWlanCryptoWepKey4 OCTET STRING, apWlanCryptoWepKeyToUse Integer32, apWlanCryptoWepMixedMode TruthValue } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.1 apWlanCryptoWepPassKey OBJECT-TYPE SYNTAX Password (SIZE (4..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Pass key. If this value is written, the four WepKey1..4 will be overwritten." ::= { apWlanCryptoWepEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.2 apWlanCryptoWepKey1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..13)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #1 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key). " ::= { apWlanCryptoWepEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.3 apWlanCryptoWepKey2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..13)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #2 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key)." ::= { apWlanCryptoWepEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.4 apWlanCryptoWepKey3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..13)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #3 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key)." ::= { apWlanCryptoWepEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.5 apWlanCryptoWepKey4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..13)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #4 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key)." ::= { apWlanCryptoWepEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.6 apWlanCryptoWepKeyToUse OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies which WEP key to use." ::= { apWlanCryptoWepEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.4.1.1.7 apWlanCryptoWepMixedMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow WEP128 clients" ::= { apWlanCryptoWepEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2 apWlanCryptoTkipTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanCryptoTkipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of WPA-TKIP encryption settings for each Security Policy using this method." ::= { apWlanCrypto 2 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1 apWlanCryptoTkipEntry OBJECT-TYPE SYNTAX ApWlanCryptoTkipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanCryptoTkipTable 1 } ApWlanCryptoTkipEntry ::= SEQUENCE { apWlanCryptoTkipBcastKeyRotation TruthValue, apWlanCryptoTkipKeyRotationInterval Unsigned32, apWlanCryptoTkipKeyToUse INTEGER, apWlanCryptoTkipPassphrase OCTET STRING, apWlanCryptoTkipKey OCTET STRING, apWlanCryptoTkipAllowWpa2Client INTEGER, apWlanCryptoTkipFastRoamPreAuth INTEGER } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.1 apWlanCryptoTkipBcastKeyRotation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use broadcast key rotation." ::= { apWlanCryptoTkipEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.2 apWlanCryptoTkipKeyRotationInterval OBJECT-TYPE SYNTAX Unsigned32 (30..604800) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast key rotation, (if enabled), occurs every this many seconds." ::= { apWlanCryptoTkipEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.3 apWlanCryptoTkipKeyToUse OBJECT-TYPE SYNTAX INTEGER { useAsciiPassphrase(1), use256bitKey(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether to use ASCII Passphrase or 256-bit Hex Key." ::= { apWlanCryptoTkipEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.4 apWlanCryptoTkipPassphrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "ASCII Passphrase." ::= { apWlanCryptoTkipEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.5 apWlanCryptoTkipKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-write STATUS current DESCRIPTION "WPA/TKIP 256 bit Key. No need to enter key if ASCII passphrase is entered." ::= { apWlanCryptoTkipEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.6 apWlanCryptoTkipAllowWpa2Client OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows WPA2 TKIP." ::= { apWlanCryptoTkipEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.4.2.1.7 apWlanCryptoTkipFastRoamPreAuth OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows Pre-Authentication." ::= { apWlanCryptoTkipEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3 apWlanCryptoCcmpTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanCryptoCcmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of WPA2-CCMP encryption settings for each Security Policy using this method." ::= { apWlanCrypto 3 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1 apWlanCryptoCcmpEntry OBJECT-TYPE SYNTAX ApWlanCryptoCcmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanCryptoCcmpTable 1 } ApWlanCryptoCcmpEntry ::= SEQUENCE { apWlanCryptoCcmpBcastKeyRotation TruthValue, apWlanCryptoCcmpKeyRotationInterval Unsigned32, apWlanCryptoCcmpKeyToUse INTEGER, apWlanCryptoCcmpPassphrase OCTET STRING, apWlanCryptoCcmpKey OCTET STRING, apWlanCryptoCcmpMixedMode TruthValue, apWlanCryptoCcmpFastRoamPreAuth TruthValue, apWlanCryptoCcmpWepMixedMode TruthValue } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.1 apWlanCryptoCcmpBcastKeyRotation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use broadcast key rotation." ::= { apWlanCryptoCcmpEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.2 apWlanCryptoCcmpKeyRotationInterval OBJECT-TYPE SYNTAX Unsigned32 (30..604800) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast key rotation, (if enabled), occurs every this many seconds." ::= { apWlanCryptoCcmpEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.3 apWlanCryptoCcmpKeyToUse OBJECT-TYPE SYNTAX INTEGER { useAsciiPassphrase(1), use256bitKey(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether to use ASCII Passphrase or 256-bit Hex Key." ::= { apWlanCryptoCcmpEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.4 apWlanCryptoCcmpPassphrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "ASCII Passphrase." ::= { apWlanCryptoCcmpEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.5 apWlanCryptoCcmpKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-write STATUS current DESCRIPTION "WPA2/CCMP 256 bit Key. No need to enter key if ASCII passphrase is entered." ::= { apWlanCryptoCcmpEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.6 apWlanCryptoCcmpMixedMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow WPA-TKIP clients" ::= { apWlanCryptoCcmpEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.7 apWlanCryptoCcmpFastRoamPreAuth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling this option enables a client associated with one Access Point to carry out an 802.1x authentication with another Access Point before it roams over to it. The Access Point will cache the keying information of the client until it roams to the new Access Point. This enables the roaming the client to start sending and receiving data sooner by not having to do 802.1x authentication after it roams. Note: This option only works when 802.1x authentication is enabled for the WLAN. " ::= { apWlanCryptoCcmpEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.4.3.1.8 apWlanCryptoCcmpWepMixedMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow WEP clients" ::= { apWlanCryptoCcmpEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4 apWlanCryptoKeyguardTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanCryptoKeyguardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of KeyGuard-MCM encryption settings for each Security Policy using this method." ::= { apWlanCrypto 4 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1 apWlanCryptoKeyguardEntry OBJECT-TYPE SYNTAX ApWlanCryptoKeyguardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanSecPolicyIndex } ::= { apWlanCryptoKeyguardTable 1 } ApWlanCryptoKeyguardEntry ::= SEQUENCE { apWlanCryptoKeyguardPassKey OCTET STRING, apWlanCryptoKeyguardKey1 OCTET STRING, apWlanCryptoKeyguardKey2 OCTET STRING, apWlanCryptoKeyguardKey3 OCTET STRING, apWlanCryptoKeyguardKey4 OCTET STRING, apWlanCryptoKeyguardKeyToUse Integer32, apWlanCryptoKeyguardMixedMode TruthValue } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.1 apWlanCryptoKeyguardPassKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Pass key. If this value is written, the four KeyguardKey1..4 will be overwritten." ::= { apWlanCryptoKeyguardEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.2 apWlanCryptoKeyguardKey1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) MAX-ACCESS read-write STATUS current DESCRIPTION "Key #1." ::= { apWlanCryptoKeyguardEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.3 apWlanCryptoKeyguardKey2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) MAX-ACCESS read-write STATUS current DESCRIPTION "Key #2." ::= { apWlanCryptoKeyguardEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.4 apWlanCryptoKeyguardKey3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) MAX-ACCESS read-write STATUS current DESCRIPTION "Key #3." ::= { apWlanCryptoKeyguardEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.5 apWlanCryptoKeyguardKey4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) MAX-ACCESS read-write STATUS current DESCRIPTION "Key #4." ::= { apWlanCryptoKeyguardEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.6 apWlanCryptoKeyguardKeyToUse OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies which WEP key to use." ::= { apWlanCryptoKeyguardEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.4.4.1.7 apWlanCryptoKeyguardMixedMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow WEP128 clients" ::= { apWlanCryptoKeyguardEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.5 apWlanMuAclPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanMuAclPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Control List that can be used by different WLANs." ::= { apWlan 5 } -- 1.3.6.1.4.1.388.11.3.4.2.5.1 apWlanMuAclPolicyEntry OBJECT-TYPE SYNTAX ApWlanMuAclPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanMuAclPolicyIndex } ::= { apWlanMuAclPolicyTable 1 } ApWlanMuAclPolicyEntry ::= SEQUENCE { apWlanMuAclPolicyIndex Integer32, apWlanMuAclPolicyName DisplayString, apWlanMuAclPolicyAccessMode INTEGER, apWlanMuAclPolicyPointerToWlan MultiPointer63, apWlanMuAclPolicyRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.2.5.1.1 apWlanMuAclPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apWlanMuAclPolicyEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.5.1.2 apWlanMuAclPolicyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the Access Control policy." ::= { apWlanMuAclPolicyEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.5.1.3 apWlanMuAclPolicyAccessMode OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "MUs match this policy can either be Allowed or Denied association." ::= { apWlanMuAclPolicyEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.5.1.4 apWlanMuAclPolicyPointerToWlan OBJECT-TYPE SYNTAX MultiPointer63 MAX-ACCESS read-only STATUS current DESCRIPTION "Points to the WLAN which have this particular MU Acl policy." ::= { apWlanMuAclPolicyEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.5.1.5 apWlanMuAclPolicyRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status." ::= { apWlanMuAclPolicyEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.6 apWlanMuAclTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanMuAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in apWlanMuAclPolicyTable), MU association with each WLAN." ::= { apWlan 6 } -- 1.3.6.1.4.1.388.11.3.4.2.6.1 apWlanMuAclEntry OBJECT-TYPE SYNTAX ApWlanMuAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanMuAclIndex } ::= { apWlanMuAclTable 1 } ApWlanMuAclEntry ::= SEQUENCE { apWlanMuAclIndex Integer32, apWlanMuAclStartingMac PhysAddress, apWlanMuAclEndingMac PhysAddress, apWlanMuAclPointerToAclPolicy SinglePointer, apWlanMuAclRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.2.6.1.1 apWlanMuAclIndex OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apWlanMuAclEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.6.1.2 apWlanMuAclStartingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Starting MAC address in a range of addresses." ::= { apWlanMuAclEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.6.1.3 apWlanMuAclEndingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ending MAC address in a range of addresses." ::= { apWlanMuAclEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.6.1.4 apWlanMuAclPointerToAclPolicy OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Pointer to the ACL policy that this row belongs." ::= { apWlanMuAclEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.6.1.5 apWlanMuAclRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status." ::= { apWlanMuAclEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.7 apWlanQosPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Policy that can be used by different WLANs." ::= { apWlan 7 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1 apWlanQosPolicyEntry OBJECT-TYPE SYNTAX ApWlanQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanQosPolicyIndex } ::= { apWlanQosPolicyTable 1 } ApWlanQosPolicyEntry ::= SEQUENCE { apWlanQosPolicyIndex Integer32, apWlanQosPolicyName DisplayString, apWlanEnableWMM TruthValue, apWlanWMMQosParam INTEGER, apWlanQosPolicyBackgroundCwMin Integer32, apWlanQosPolicyBackgroundCwMax Integer32, apWlanQosPolicyBackgroundAifsn Integer32, apWlanQosPolicyBackgroundTxopsTime Integer32, apWlanQosPolicyBackgroundTxopsTimeInMS Integer32, apWlanQosPolicyBestEffortCwMin Integer32, apWlanQosPolicyBestEffortCwMax Integer32, apWlanQosPolicyBestEffortAifsn Integer32, apWlanQosPolicyBestEffortTxopsTime Integer32, apWlanQosPolicyBestEffortTxopsTimeInMS Integer32, apWlanQosPolicyVideoCwMin Integer32, apWlanQosPolicyVideoCwMax Integer32, apWlanQosPolicyVideoAifsn Integer32, apWlanQosPolicyVideoTxopsTime Integer32, apWlanQosPolicyVideoTxopsTimeInMS Integer32, apWlanQosPolicyVoiceCwMin Integer32, apWlanQosPolicyVoiceCwMax Integer32, apWlanQosPolicyVoiceAifsn Integer32, apWlanQosPolicyVoiceTxopsTime Integer32, apWlanQosPolicyVoiceTxopsTimeInMS Integer32, apWlanVoicePrioritization TruthValue, apWlanMulticastAddr1 PhysAddress, apWlanMulticastAddr2 PhysAddress, apWlanQosPolicyPointerToWlan MultiPointer63, apWlanQosPolicyRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.1 apWlanQosPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apWlanQosPolicyEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.2 apWlanQosPolicyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the QoS policy." ::= { apWlanQosPolicyEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.3 apWlanEnableWMM OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable WiFi Multimedia Extension support." ::= { apWlanQosPolicyEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.4 apWlanWMMQosParam OBJECT-TYPE SYNTAX INTEGER { manual(1), wifi11agn(2), wifi11b(3), default11agn(4), default11b(5), voice11agn(6), voice11b(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Pre-Programmed WMM QOS Parameters. manual - Modify parameters wifi11agn - WiFi 11a/11g/11n defaults wifi11b - WiFi 11b defaults default11agn - Symbol 11a/11g/11n defaults default11b - Symbol 11b defaults voice11agn - Symbol 11a/11g/11n voice params voice11b - Symbol 11b voice params" ::= { apWlanQosPolicyEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.5 apWlanQosPolicyBackgroundCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Background access category." ::= { apWlanQosPolicyEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.6 apWlanQosPolicyBackgroundCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Background access category." ::= { apWlanQosPolicyEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.7 apWlanQosPolicyBackgroundAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Background access category." ::= { apWlanQosPolicyEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.8 apWlanQosPolicyBackgroundTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Background access category." ::= { apWlanQosPolicyEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.9 apWlanQosPolicyBackgroundTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Background access category." ::= { apWlanQosPolicyEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.10 apWlanQosPolicyBestEffortCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Best Effort access category." ::= { apWlanQosPolicyEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.11 apWlanQosPolicyBestEffortCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Best Effort access category." ::= { apWlanQosPolicyEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.12 apWlanQosPolicyBestEffortAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Best Effort access category." ::= { apWlanQosPolicyEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.13 apWlanQosPolicyBestEffortTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Best Effort access category." ::= { apWlanQosPolicyEntry 13 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.14 apWlanQosPolicyBestEffortTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Best Effort access category." ::= { apWlanQosPolicyEntry 14 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.15 apWlanQosPolicyVideoCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Video access category." ::= { apWlanQosPolicyEntry 15 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.16 apWlanQosPolicyVideoCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Video access category." ::= { apWlanQosPolicyEntry 16 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.17 apWlanQosPolicyVideoAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Video access category." ::= { apWlanQosPolicyEntry 17 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.18 apWlanQosPolicyVideoTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Video access category." ::= { apWlanQosPolicyEntry 18 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.19 apWlanQosPolicyVideoTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Video access category." ::= { apWlanQosPolicyEntry 19 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.20 apWlanQosPolicyVoiceCwMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Voice access category." ::= { apWlanQosPolicyEntry 20 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.21 apWlanQosPolicyVoiceCwMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Voice access category." ::= { apWlanQosPolicyEntry 21 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.22 apWlanQosPolicyVoiceAifsn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Voice access category." ::= { apWlanQosPolicyEntry 22 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.23 apWlanQosPolicyVoiceTxopsTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Voice access category." ::= { apWlanQosPolicyEntry 23 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.24 apWlanQosPolicyVoiceTxopsTimeInMS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This QoS parameter is to be used by the MU for the Voice access category." ::= { apWlanQosPolicyEntry 24 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.25 apWlanVoicePrioritization OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Support legacy voice prioritization." ::= { apWlanQosPolicyEntry 25 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.26 apWlanMulticastAddr1 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast address 1." ::= { apWlanQosPolicyEntry 26 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.27 apWlanMulticastAddr2 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast address 2." ::= { apWlanQosPolicyEntry 27 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.28 apWlanQosPolicyPointerToWlan OBJECT-TYPE SYNTAX MultiPointer63 MAX-ACCESS read-only STATUS current DESCRIPTION "Points to the WLAN which have this particular QOS policy." ::= { apWlanQosPolicyEntry 28 } -- 1.3.6.1.4.1.388.11.3.4.2.7.1.29 apWlanQosPolicyRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status." ::= { apWlanQosPolicyEntry 29 } -- 1.3.6.1.4.1.388.11.3.4.2.8 apWlanBwShareModeTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWlanBwShareModeEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Description." ::= { apWlan 8 } -- 1.3.6.1.4.1.388.11.3.4.2.8.1 apWlanBwShareModeEntry OBJECT-TYPE SYNTAX ApWlanBwShareModeEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Description." INDEX { apRadioSettingsIndex } ::= { apWlanBwShareModeTable 1 } ApWlanBwShareModeEntry ::= SEQUENCE { apWlanBwShareMode INTEGER } -- 1.3.6.1.4.1.388.11.3.4.2.8.1.1 apWlanBwShareMode OBJECT-TYPE SYNTAX INTEGER { firstInFirstOut(0), roundRobin(1), weightedRoundRobin(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable configures the manner in which bandwidth is shared among the WLANs. Only in mode 'weightedRoundRobin' are the apRadioWlanWeight values for each Radio and WLAN used." ::= { apWlanBwShareModeEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.2.9 apWlanGlobalRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables the rate-limiting feature, when set to True/False respectively." ::= { apWlan 9 } -- 1.3.6.1.4.1.388.11.3.4.2.10 apWlanProxyARPEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Proxy ARP for Wireless LANs." ::= { apWlan 10 } -- 1.3.6.1.4.1.388.11.3.4.3 apHotSpot OBJECT IDENTIFIER ::= { apRf 3 } -- 1.3.6.1.4.1.388.11.3.4.3.2 apHotSpotWhiteListTable OBJECT-TYPE SYNTAX SEQUENCE OF ApHotSpotWhiteListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of White List entires for HotSpot for the WLANs." ::= { apHotSpot 2 } -- 1.3.6.1.4.1.388.11.3.4.3.2.1 apHotSpotWhiteListEntry OBJECT-TYPE SYNTAX ApHotSpotWhiteListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanIndex, apHotSpotWhiteListIndex } ::= { apHotSpotWhiteListTable 1 } ApHotSpotWhiteListEntry ::= SEQUENCE { apHotSpotWhiteListIndex Integer32, apHotSpotWhiteListWalledGardenIp IpAddress, apHotSpotWhiteListRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.3.2.1.1 apHotSpotWhiteListIndex OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index 1...10" ::= { apHotSpotWhiteListEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.3.2.1.2 apHotSpotWhiteListWalledGardenIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of White List entries" ::= { apHotSpotWhiteListEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.3.2.1.3 apHotSpotWhiteListRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Value to control row creation/deletion." ::= { apHotSpotWhiteListEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.3.1 apHotSpotTable OBJECT-TYPE SYNTAX SEQUENCE OF ApHotSpotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Hotspot configuration." ::= { apHotSpot 1 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1 apHotSpotEntry OBJECT-TYPE SYNTAX ApHotSpotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanIndex } ::= { apHotSpotTable 1 } ApHotSpotEntry ::= SEQUENCE { apHotSpotDefaultFileMode INTEGER, apHotSpotExternalLoginPageUrl DisplayString, apHotSpotExternalWelomePageUrl DisplayString, apHotSpotExternalFailPageUrl DisplayString, apHotSpotPriRadiusServerIp IpAddress, apHotSpotPriRadiusPort Integer32, apHotSpotPriRadiusSecret Password, apHotSpotSecRadiusServerIp IpAddress, apHotSpotSecRadiusPort Integer32, apHotSpotSecRadiusSecret Password, apHotSpotRadiusAcctMode TruthValue, apHotSpotRadiusAcctServerIp IpAddress, apHotSpotRadiusAcctPort Integer32, apHotSpotRadiusAcctSecret Password, apHotSpotRadiusAcctTimeout Integer32, apHotSpotRadiusAcctRetryCount Integer32, apHotSpotRadiusSessMode TruthValue, apHotSpotRadiusSessTimeout Integer32 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.1 apHotSpotDefaultFileMode OBJECT-TYPE SYNTAX INTEGER { default(1), externalURL(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Default File Mode for Login, Welcome and Fail Pages." ::= { apHotSpotEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.2 apHotSpotExternalLoginPageUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Login Page URL on external server." ::= { apHotSpotEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.3 apHotSpotExternalWelomePageUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Welcome Page URL on external server." ::= { apHotSpotEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.4 apHotSpotExternalFailPageUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Fail Page URL on external server." ::= { apHotSpotEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.5 apHotSpotPriRadiusServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of Primary Radius Server. Use 127.0.0.1 to use the Local Radius Server on the AP." ::= { apHotSpotEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.6 apHotSpotPriRadiusPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port for Primary Radius Server." ::= { apHotSpotEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.7 apHotSpotPriRadiusSecret OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Shared Secret for Primary Radius Server." ::= { apHotSpotEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.8 apHotSpotSecRadiusServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of Secondary Radius Server. Use 127.0.0.1 to use the Local Radius Server on the AP." ::= { apHotSpotEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.9 apHotSpotSecRadiusPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port for Secondary Radius Server." ::= { apHotSpotEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.10 apHotSpotSecRadiusSecret OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Shared Secret for Secondary Radius Server." ::= { apHotSpotEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.11 apHotSpotRadiusAcctMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Accounting Mode." ::= { apHotSpotEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.12 apHotSpotRadiusAcctServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "External Accounting Radius Server." ::= { apHotSpotEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.13 apHotSpotRadiusAcctPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port for External Accounting Radius Server." ::= { apHotSpotEntry 13 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.14 apHotSpotRadiusAcctSecret OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Shared Secret for External Accounting Radius Server." ::= { apHotSpotEntry 14 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.15 apHotSpotRadiusAcctTimeout OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Accounting Timeout value." ::= { apHotSpotEntry 15 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.16 apHotSpotRadiusAcctRetryCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Accounting Retry Count value." ::= { apHotSpotEntry 16 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.17 apHotSpotRadiusSessMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Session Timeout Mode (Applicable only for Internal Radius Server)" ::= { apHotSpotEntry 17 } -- 1.3.6.1.4.1.388.11.3.4.3.1.1.18 apHotSpotRadiusSessTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Radius Session Timeout (Applicable only for Internal Radius Server)" ::= { apHotSpotEntry 18 } -- 1.3.6.1.4.1.388.11.3.4.3.3 apHotSpotLoadCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF ApHotSpotLoadCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Hotspot load configuration for import/export." ::= { apHotSpot 3 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1 apHotSpotLoadCfgEntry OBJECT-TYPE SYNTAX ApHotSpotLoadCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apWlanIndex } ::= { apHotSpotLoadCfgTable 1 } ApHotSpotLoadCfgEntry ::= SEQUENCE { apHotSpotLoadCfgOperation INTEGER, apHotSpotLoadCfgServerPath DisplayString, apHotSpotLoadCfgServerFilename OCTET STRING, apHotSpotLoadCfgServerIpAddr IpAddress, apHotSpotLoadCfgFtpUsername DisplayString, apHotSpotLoadCfgFtpPassword DisplayString, apHotSpotLoadCfgStart TruthValue, apHotSpotLoadCfgOperationsDone Counter32, apHotSpotLoadCfgResult DisplayString, apHotSpotLoadCfgSuccess TruthValue, apHotSpotLoadCfgSetDefault INTEGER, apHotSpotLoadCfgDeleteAll TruthValue } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.1 apHotSpotLoadCfgOperation OBJECT-TYPE SYNTAX INTEGER { unspecified(1), ftpConfigServerToAP(2), ftpConfigAPToServer(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the type and direction of the transfer to perform involving the configuration file.Presently it support only FTP." ::= { apHotSpotLoadCfgEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.2 apHotSpotLoadCfgServerPath OBJECT-TYPE SYNTAX DisplayString (SIZE (0..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path to the firmware on the FTP server. Remember that the type of separator varies depending on the operating system of the server. For Windows, use '\', for Unix use '/'. No path need be specified, (in which case the default directory for the FTP server will be used); if a path is specified, remember to terminate it with a trailing '/' or '\'." ::= { apHotSpotLoadCfgEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.3 apHotSpotLoadCfgServerFilename OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..410)) MAX-ACCESS read-write STATUS current DESCRIPTION "The names, (on the server), of the configuration file to load/store from/to the server. Each file name should be separated out with space as delimiter. Upto 10 file names are allowed." ::= { apHotSpotLoadCfgEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.4 apHotSpotLoadCfgServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the server used for a configuration file load/store operation." ::= { apHotSpotLoadCfgEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.5 apHotSpotLoadCfgFtpUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Username for FTP HotSpot LoadCfg operations." ::= { apHotSpotLoadCfgEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.6 apHotSpotLoadCfgFtpPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for FTP HotSpot LoadCfg operations." ::= { apHotSpotLoadCfgEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.7 apHotSpotLoadCfgStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set this value to start the configuration file operation. Note that unlike a firmware load, the actual FTP transfer does begin virtually immediately." ::= { apHotSpotLoadCfgEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.8 apHotSpotLoadCfgOperationsDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value counts the total number of configuration file transfers completed, (whether they succeed or fail). The SNMP manager should save the value of this counter just before starting a HotSpot LoadCfg operation, and then wait for this value to increment before checking the Result and/or Success values." ::= { apHotSpotLoadCfgEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.9 apHotSpotLoadCfgResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This value reflects the result of the most-recent configuration file load/store." ::= { apHotSpotLoadCfgEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.10 apHotSpotLoadCfgSuccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The success/failure status of the most recent configuration file load/store." ::= { apHotSpotLoadCfgEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.11 apHotSpotLoadCfgSetDefault OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If any possible failure or mistakes on the downloaded files while modification and editing will have an option to reset those files with default file set per WLAN. User can set the value to TRUE to revert it back to default set of files. By default the value will be FALSE and user is not allowed to set FALSE, since it is an default entry after every change requested." ::= { apHotSpotLoadCfgEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.3.3.1.12 apHotSpotLoadCfgDeleteAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If the value set to True(1), then all hotspot configuration files will get deleted for that particular WLAN index. By default the value will be set to false(2). Once set and deleted the object value will be reset back to false(2). Also, setting the object value to false(2) always return NOT_WRITABLE error and only possible set value is true(1)." DEFVAL { false } ::= { apHotSpotLoadCfgEntry 12 } -- 1.3.6.1.4.1.388.11.3.4.4 apMus OBJECT IDENTIFIER ::= { apRf 4 } -- This group describes MU Locationing settings and table. -- 1.3.6.1.4.1.388.11.3.4.4.1 apMuLocationing OBJECT IDENTIFIER ::= { apMus 1 } -- 1.3.6.1.4.1.388.11.3.4.4.1.1 apMuLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable MU Locationing feature. " ::= { apMuLocationing 1 } -- 1.3.6.1.4.1.388.11.3.4.4.1.2 apMuLocationingClear OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to TRUE clears all apMuLocationingTable entries. Any probe request heard after that event will be treated as newly heard." ::= { apMuLocationing 2 } -- 1.3.6.1.4.1.388.11.3.4.4.1.3 apMuLocationingMaxMus OBJECT-TYPE SYNTAX Integer32 (20..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of MU's to be reported in the apMuLocationingTable. The minimum number is 20 and maximum 200. " ::= { apMuLocationing 3 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4 apMuLocationingTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMuLocationingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The switch shall store the information received in the probe request messages in this table. " ::= { apMuLocationing 4 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1 apMuLocationingEntry OBJECT-TYPE SYNTAX ApMuLocationingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apMuLocationingIndex } ::= { apMuLocationingTable 1 } ApMuLocationingEntry ::= SEQUENCE { apMuLocationingIndex Integer32, apMuLocationingMuMac PhysAddress, apMuLocationingPortalMac PhysAddress, apMuLocationingSignalStrength Integer32, apMuLocationingHeardChannel Integer32, apMuLocationingHeardTime TimeTicks } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1.1 apMuLocationingIndex OBJECT-TYPE SYNTAX Integer32 (1..2400) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apMuLocationingEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1.2 apMuLocationingMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MU." ::= { apMuLocationingEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1.3 apMuLocationingPortalMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the Portal." ::= { apMuLocationingEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1.4 apMuLocationingSignalStrength OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Received Signal Strength in dBm by the Heard Portal." ::= { apMuLocationingEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1.5 apMuLocationingHeardChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Describes on which channel probe is heard." ::= { apMuLocationingEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.4.1.4.1.6 apMuLocationingHeardTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the time when this probe is heard." ::= { apMuLocationingEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.4.1.5 apMuLocationingAddEntryToTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMuLocationingAddEntryToEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The switch shall provide option to append information to apMuLocationingTable." ::= { apMuLocationing 5 } -- 1.3.6.1.4.1.388.11.3.4.4.1.5.1 apMuLocationingAddEntryToEntry OBJECT-TYPE SYNTAX ApMuLocationingAddEntryToEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apMuLocationingIndex } ::= { apMuLocationingAddEntryToTable 1 } ApMuLocationingAddEntryToEntry ::= SEQUENCE { apMuLocationingAddMuMac PhysAddress, apMuLocationingAddPortalMac PhysAddress, apMuLocationingAddSignalStrength Integer32, apMuLocationingAddHeardChannel Integer32, apMuLocationingAddHeardTime TimeTicks } -- 1.3.6.1.4.1.388.11.3.4.4.1.5.1.1 apMuLocationingAddMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address of the MU." ::= { apMuLocationingAddEntryToEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.4.1.5.1.2 apMuLocationingAddPortalMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address of the Portal." ::= { apMuLocationingAddEntryToEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.4.1.5.1.3 apMuLocationingAddSignalStrength OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Received Signal Strength in dBm by the Heard Portal." ::= { apMuLocationingAddEntryToEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.4.1.5.1.4 apMuLocationingAddHeardChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Describes on which channel probe is heard." ::= { apMuLocationingAddEntryToEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.4.1.5.1.5 apMuLocationingAddHeardTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "Describes the time when this probe is heard." ::= { apMuLocationingAddEntryToEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.5 apIpFilter OBJECT IDENTIFIER ::= { apRf 5 } -- 1.3.6.1.4.1.388.11.3.4.5.1 apIpFilterPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ApIpFilterPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Global IP Filter Policies" ::= { apIpFilter 1 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1 apIpFilterPolicyEntry OBJECT-TYPE SYNTAX ApIpFilterPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apIpFilterPolicyIndex } ::= { apIpFilterPolicyTable 1 } ApIpFilterPolicyEntry ::= SEQUENCE { apIpFilterPolicyIndex Integer32, apIpFilterPolicyName DisplayString, apIpFilterPolicyProtocol INTEGER, apIpFilterPolicyStartPort Integer32, apIpFilterPolicyEndPort Integer32, apIpFilterPolicySrcStartIp IpAddress, apIpFilterPolicySrcEndIp IpAddress, apIpFilterPolicyDestStartIp IpAddress, apIpFilterPolicyDestEndIp IpAddress, apIpFilterPolicyUseStatus DisplayString, apIpFilterPolicyRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.1 apIpFilterPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index" ::= { apIpFilterPolicyEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.2 apIpFilterPolicyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Name. It has to be unique for every policy." ::= { apIpFilterPolicyEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.3 apIpFilterPolicyProtocol OBJECT-TYPE SYNTAX INTEGER { icmp(1), igmp(2), ipip(4), tcp(6), egp(8), pup(12), udp(17), idp(22), ipv6(41), rsvp(46), gre(47), esp(50), ah(51), pim(103), comp(108), rawip(255), all(256) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Protocol Number." ::= { apIpFilterPolicyEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.4 apIpFilterPolicyStartPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Starting Port Number" ::= { apIpFilterPolicyEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.5 apIpFilterPolicyEndPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Ending Port Number" ::= { apIpFilterPolicyEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.6 apIpFilterPolicySrcStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Source Start IP Address." ::= { apIpFilterPolicyEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.7 apIpFilterPolicySrcEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Source End IP Address." ::= { apIpFilterPolicyEntry 7 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.8 apIpFilterPolicyDestStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Dest Start IP Address." ::= { apIpFilterPolicyEntry 8 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.9 apIpFilterPolicyDestEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Dest End IP Address." ::= { apIpFilterPolicyEntry 9 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.10 apIpFilterPolicyUseStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description.Indicates whether filter is used by any of the WLAN IP Filter Tables or the TRUNK IP Filter Table. If got used then displays YES otherwise NO." ::= { apIpFilterPolicyEntry 10 } -- 1.3.6.1.4.1.388.11.3.4.5.1.1.11 apIpFilterPolicyRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creation and deletion of policies." ::= { apIpFilterPolicyEntry 11 } -- 1.3.6.1.4.1.388.11.3.4.5.2 apIpFilterWlan OBJECT IDENTIFIER ::= { apIpFilter 2 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1 apIpFilterWlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ApIpFilterWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Filter for WLAN" ::= { apIpFilterWlan 1 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1.1 apIpFilterWlanEntry OBJECT-TYPE SYNTAX ApIpFilterWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanIndex } ::= { apIpFilterWlanTable 1 } ApIpFilterWlanEntry ::= SEQUENCE { apIpFilterWlanMode TruthValue, apIpFilterWlanDefInAction INTEGER, apIpFilterWlanDefOutAction INTEGER, apIpFilterWlanInPackets Counter32, apIpFilterWlanOutPackets Counter32 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1.1.1 apIpFilterWlanMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Mode." ::= { apIpFilterWlanEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1.1.2 apIpFilterWlanDefInAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Default IN Action." ::= { apIpFilterWlanEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1.1.3 apIpFilterWlanDefOutAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Default OUT Action." ::= { apIpFilterWlanEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1.1.4 apIpFilterWlanInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets allowed or denied as a result of the default policy" ::= { apIpFilterWlanEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.5.2.1.1.5 apIpFilterWlanOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets allowed or denied as a result of the default policy" ::= { apIpFilterWlanEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2 apIpFilterWlanPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ApIpFilterWlanPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Filter Policy for WLANs." ::= { apIpFilterWlan 2 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1 apIpFilterWlanPolicyEntry OBJECT-TYPE SYNTAX ApIpFilterWlanPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanIndex, apIpFilterWlanPolicyIndex } ::= { apIpFilterWlanPolicyTable 1 } ApIpFilterWlanPolicyEntry ::= SEQUENCE { apIpFilterWlanPolicyIndex Integer32, apIpFilterWlanPolicyPolicy DisplayString, apIpFilterWlanPolicyDirection INTEGER, apIpFilterWlanPolicyAction INTEGER, apIpFilterWlanPolicyRowStatus AbbrevRowStatus, apIpFilterWlanPolicyPackets Counter32 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1.1 apIpFilterWlanPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apIpFilterWlanPolicyEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1.2 apIpFilterWlanPolicyPolicy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Single Pointer to the Global IP Filter Policy." ::= { apIpFilterWlanPolicyEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1.3 apIpFilterWlanPolicyDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Direction." ::= { apIpFilterWlanPolicyEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1.4 apIpFilterWlanPolicyAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Action." ::= { apIpFilterWlanPolicyEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1.5 apIpFilterWlanPolicyRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creation and deletion." ::= { apIpFilterWlanPolicyEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.5.2.2.1.6 apIpFilterWlanPolicyPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets allowed or denied as a result of this policy." ::= { apIpFilterWlanPolicyEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.5.3 apIpFilterLan OBJECT IDENTIFIER ::= { apIpFilter 3 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1 apIpFilterLanTable OBJECT-TYPE SYNTAX SEQUENCE OF ApIpFilterLanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Filter for WLAN" ::= { apIpFilterLan 1 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1 apIpFilterLanEntry OBJECT-TYPE SYNTAX ApIpFilterLanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apIpFilterLanIndex } ::= { apIpFilterLanTable 1 } ApIpFilterLanEntry ::= SEQUENCE { apIpFilterLanIndex Integer32, apIpFilterLanMode TruthValue, apIpFilterLanDefInAction INTEGER, apIpFilterLanDefOutAction INTEGER, apIpFilterLanInPackets Counter32, apIpFilterLanOutPackets Counter32 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1.1 apIpFilterLanIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { apIpFilterLanEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1.2 apIpFilterLanMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Mode." ::= { apIpFilterLanEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1.3 apIpFilterLanDefInAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Default IN Action." ::= { apIpFilterLanEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1.4 apIpFilterLanDefOutAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Default OUT Action." ::= { apIpFilterLanEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1.5 apIpFilterLanInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets allowed or denied as a result of the default policy" ::= { apIpFilterLanEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.5.3.1.1.6 apIpFilterLanOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets allowed or denied as a result of the default policy." ::= { apIpFilterLanEntry 6 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2 apIpFilterLanPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ApIpFilterLanPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Filter Policy for WAN Trunk Port." ::= { apIpFilterLan 2 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1 apIpFilterLanPolicyEntry OBJECT-TYPE SYNTAX ApIpFilterLanPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apIpFilterLanIndex, apIpFilterLanPolicyIndex } ::= { apIpFilterLanPolicyTable 1 } ApIpFilterLanPolicyEntry ::= SEQUENCE { apIpFilterLanPolicyIndex Integer32, apIpFilterLanPolicyPolicy DisplayString, apIpFilterLanPolicyDirection INTEGER, apIpFilterLanPolicyAction INTEGER, apIpFilterLanPolicyRowStatus AbbrevRowStatus, apIpFilterLanPolicyPackets Counter32 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1.1 apIpFilterLanPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apIpFilterLanPolicyEntry 1 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1.2 apIpFilterLanPolicyPolicy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Single Pointer to the Global IP Filter Policy." ::= { apIpFilterLanPolicyEntry 2 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1.3 apIpFilterLanPolicyDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Direction." ::= { apIpFilterLanPolicyEntry 3 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1.4 apIpFilterLanPolicyAction OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter Policy Action." ::= { apIpFilterLanPolicyEntry 4 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1.5 apIpFilterLanPolicyRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creation and deletion." ::= { apIpFilterLanPolicyEntry 5 } -- 1.3.6.1.4.1.388.11.3.4.5.3.2.1.6 apIpFilterLanPolicyPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets allowed or denied as a result of this policy." ::= { apIpFilterLanPolicyEntry 6 } -- 1.3.6.1.4.1.388.11.3.5 apSwitch OBJECT IDENTIFIER ::= { abgAP 5 } -- 1.3.6.1.4.1.388.11.3.5.1 apWan OBJECT IDENTIFIER ::= { apSwitch 1 } -- 1.3.6.1.4.1.388.11.3.5.1.1 apWanVpn OBJECT IDENTIFIER ::= { apWan 1 } -- 1.3.6.1.4.1.388.11.3.5.1.1.1 apWanVpnTunnelConfig OBJECT IDENTIFIER ::= { apWanVpn 1 } -- 1.3.6.1.4.1.388.11.3.5.1.1.1.1 apWanVpnKeyAutoTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWanVpnKeyAutoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Auto Key Setting entries." ::= { apWanVpnTunnelConfig 1 } -- 1.3.6.1.4.1.388.11.3.5.1.1.1.1.1 apWanVpnKeyAutoEntry OBJECT-TYPE SYNTAX ApWanVpnKeyAutoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " AUGMENTS { ccWanVpnEntry } ::= { apWanVpnKeyAutoTable 1 } ApWanVpnKeyAutoEntry ::= SEQUENCE { apWanVpnKeyAutoSALifeTime Unsigned32 } -- 1.3.6.1.4.1.388.11.3.5.1.1.1.1.1.1 apWanVpnKeyAutoSALifeTime OBJECT-TYPE SYNTAX Unsigned32 (300..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds that the security association is valid. This is an augumentation to ccWanVpnKeyAutoTable and this particular column for Security Association Life Time has been added as it was missing from the WS2000 MIB." DEFVAL { 3600 } ::= { apWanVpnKeyAutoEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.1.2 apWanPppoe OBJECT IDENTIFIER ::= { apWan 2 } -- 1.3.6.1.4.1.388.11.3.5.1.2.1 apWanPppoeClientTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWanPppoeClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apWanPppoe 1 } -- 1.3.6.1.4.1.388.11.3.5.1.2.1.1 apWanPppoeClientEntry OBJECT-TYPE SYNTAX ApWanPppoeClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apWanPppoeClientIndex } ::= { apWanPppoeClientTable 1 } ApWanPppoeClientEntry ::= SEQUENCE { apWanPppoeClientIndex Integer32, apWanPppoeClientIp IpAddress, apWanPppoeClientGateway IpAddress, apWanPppoeClientPrimaryDNSServer IpAddress, apWanPppoeClientSecondaryDNSServer IpAddress } -- 1.3.6.1.4.1.388.11.3.5.1.2.1.1.1 apWanPppoeClientIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { apWanPppoeClientEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.1.2.1.1.2 apWanPppoeClientIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apWanPppoeClientEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.1.2.1.1.3 apWanPppoeClientGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apWanPppoeClientEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.1.2.1.1.4 apWanPppoeClientPrimaryDNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apWanPppoeClientEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.1.2.1.1.5 apWanPppoeClientSecondaryDNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apWanPppoeClientEntry 5 } -- 1.3.6.1.4.1.388.11.3.5.1.3 apWanPort OBJECT IDENTIFIER ::= { apWan 3 } -- 1.3.6.1.4.1.388.11.3.5.1.3.1 apWanPortAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wan Ethernet Port Auto-Negotiation Value." ::= { apWanPort 1 } -- 1.3.6.1.4.1.388.11.3.5.1.3.2 apWanPortSpeed OBJECT-TYPE SYNTAX INTEGER { tenMbps(0), hundredMbps(1), oneGbps(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wan Ethernet Port Speed Value. AP5131 does not support oneGbps." ::= { apWanPort 2 } -- 1.3.6.1.4.1.388.11.3.5.1.3.3 apWanPortDuplex OBJECT-TYPE SYNTAX INTEGER { half(0), full(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wan Ethernet Port Duplex Value." ::= { apWanPort 3 } -- 1.3.6.1.4.1.388.11.3.5.1.4 apWanDynDNS OBJECT IDENTIFIER ::= { apWan 4 } -- 1.3.6.1.4.1.388.11.3.5.1.4.1 apWanDynDNSMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DynDNS feature on WAN interface." ::= { apWanDynDNS 1 } -- 1.3.6.1.4.1.388.11.3.5.1.4.2 apWanDynDNSTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWanDynDNSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DynDNS configuration entries." ::= { apWanDynDNS 2 } -- 1.3.6.1.4.1.388.11.3.5.1.4.2.1 apWanDynDNSEntry OBJECT-TYPE SYNTAX ApWanDynDNSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apWanDynDNSIndex } ::= { apWanDynDNSTable 1 } ApWanDynDNSEntry ::= SEQUENCE { apWanDynDNSUsername DisplayString, apWanDynDNSPassword DisplayString, apWanDynDNSHostname DisplayString, apWanDynDNSIndex Integer32 } -- 1.3.6.1.4.1.388.11.3.5.1.4.2.1.1 apWanDynDNSUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DynDNS Username which is used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password." ::= { apWanDynDNSEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.1.4.2.1.2 apWanDynDNSPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DynDNS Password used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password" ::= { apWanDynDNSEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.1.4.2.1.3 apWanDynDNSHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DynDNS Hostname which has be linked to the WAN IP address. The hostname entry has to be made in the DynDNS.org site." ::= { apWanDynDNSEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.1.4.2.1.4 apWanDynDNSIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index for apWanDynDNSTable." ::= { apWanDynDNSEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.1.4.3 apWanDynDNSUpdateResponseTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWanDynDNSUpdateResponseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to display the DynDNS update respone." ::= { apWanDynDNS 3 } -- 1.3.6.1.4.1.388.11.3.5.1.4.3.1 apWanDynDNSUpdateResponseEntry OBJECT-TYPE SYNTAX ApWanDynDNSUpdateResponseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apWanDynDNSUpdateResponseIndex } ::= { apWanDynDNSUpdateResponseTable 1 } ApWanDynDNSUpdateResponseEntry ::= SEQUENCE { apWanDynDNSUpdateHostname DisplayString, apWanDynDNSUpdateIp Integer32, apWanDynDNSUpdateStatus Integer32, apWanDynDNSUpdateResponseIndex Integer32 } -- 1.3.6.1.4.1.388.11.3.5.1.4.3.1.1 apWanDynDNSUpdateHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The DynDNS hostname which is linked to the WAN IP Address in the DynDNS.org database." ::= { apWanDynDNSUpdateResponseEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.1.4.3.1.2 apWanDynDNSUpdateIp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The WAN IP address which is linked with the hostname in the DynDNS.org site." ::= { apWanDynDNSUpdateResponseEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.1.4.3.1.3 apWanDynDNSUpdateStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "DynDNS update response received from the DynDNS.org." ::= { apWanDynDNSUpdateResponseEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.1.4.3.1.4 apWanDynDNSUpdateResponseIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index for apWanDynDNSUpdateResponseTable." ::= { apWanDynDNSUpdateResponseEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.1.4.4 apWanDynDNSPerformUpdate OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Perform Manual DynDNS Update. An update request to update the WAN IP and hostname is sent to DynDNS.org." ::= { apWanDynDNS 4 } -- 1.3.6.1.4.1.388.11.3.5.2 apLan OBJECT IDENTIFIER ::= { apSwitch 2 } -- 1.3.6.1.4.1.388.11.3.5.2.1 apLanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Enable LAN port." ::= { apLan 1 } -- 1.3.6.1.4.1.388.11.3.5.2.2 apLanTimeOut OBJECT-TYPE SYNTAX INTEGER { disabled(1), hardwareDefect(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "LAN Timeout Status" ::= { apLan 2 } -- 1.3.6.1.4.1.388.11.3.5.2.3 apLanTimeOutValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If LAN is not connected after Timeout period (in seconds), stop the AP from sending beacons." ::= { apLan 3 } -- 1.3.6.1.4.1.388.11.3.5.2.4 apLanVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Enable VLAN." ::= { apLan 4 } -- 1.3.6.1.4.1.388.11.3.5.2.5 apLanAdminVlanTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Management VLAN Tag." ::= { apLan 5 } -- 1.3.6.1.4.1.388.11.3.5.2.6 apLanNativeVlanTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Native VLAN Tag." ::= { apLan 6 } -- 802.1x Port Authentication is used to provide -- security and authentication of all wired clients on -- a network. The WS 2000 supports 802.1x port -- authentication for the AP 300 Access Ports connected -- to it. It uses a username and password for all ports -- that can be configured from the wireless switch. -- 1.3.6.1.4.1.388.11.3.5.2.17 apLan802dt1xAuth OBJECT IDENTIFIER ::= { apLan 17 } -- 1.3.6.1.4.1.388.11.3.5.2.17.2 apLan802dt1xAuthLogin OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "802.1x AP Authentication username." ::= { apLan802dt1xAuth 2 } -- 1.3.6.1.4.1.388.11.3.5.2.17.3 apLan802dt1xAuthPass OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "802.1x AP Authentication password." ::= { apLan802dt1xAuth 3 } -- 1.3.6.1.4.1.388.11.3.5.2.18 apLanVlan OBJECT IDENTIFIER ::= { apLan 18 } -- 1.3.6.1.4.1.388.11.3.5.2.18.1 apVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ApVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of VLAN entries." ::= { apLanVlan 1 } -- 1.3.6.1.4.1.388.11.3.5.2.18.1.1 apVlanEntry OBJECT-TYPE SYNTAX ApVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apVlanIndex } ::= { apVlanTable 1 } ApVlanEntry ::= SEQUENCE { apVlanIndex Integer32, apVlanId Integer32, apVlanName DisplayString, apVlanPointerToWlan MultiPointer63, apVlanRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.5.2.18.1.1.1 apVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index (1...16)" ::= { apVlanEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.2.18.1.1.2 apVlanId OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN id." ::= { apVlanEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.2.18.1.1.3 apVlanName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN name." ::= { apVlanEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.2.18.1.1.4 apVlanPointerToWlan OBJECT-TYPE SYNTAX MultiPointer63 MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to WLAN associated with this particular VLAN." ::= { apVlanEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.2.18.1.1.5 apVlanRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status." ::= { apVlanEntry 5 } -- 1.3.6.1.4.1.388.11.3.5.2.19 apSubnet OBJECT IDENTIFIER ::= { apLan 19 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1 apSubnetTable OBJECT-TYPE SYNTAX SEQUENCE OF ApSubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Subnets." ::= { apSubnet 1 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1 apSubnetEntry OBJECT-TYPE SYNTAX ApSubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " AUGMENTS { ccSubnetEntry } ::= { apSubnetTable 1 } ApSubnetEntry ::= SEQUENCE { apSubnetDhcpState INTEGER, apSubnetVlanEnable TruthValue, apSubnetTypeFilterAccessMode INTEGER, apSubnetAdminVlanTag Integer32, apSubnetNativeVlanTag Integer32, apSubnetNativeVlanTagMode INTEGER } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1.1 apSubnetDhcpState OBJECT-TYPE SYNTAX INTEGER { dhcpClient(1), dhcpServer(2), dhcpNone(3), dhcpBootp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how Subnet gets its IP address/mask." ::= { apSubnetEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1.2 apSubnetVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable VLAN." ::= { apSubnetEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1.3 apSubnetTypeFilterAccessMode OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Packets can either be Forwarded or Discarded." ::= { apSubnetEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1.4 apSubnetAdminVlanTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Management VLAN Tag." ::= { apSubnetEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1.5 apSubnetNativeVlanTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Native VLAN Tag." ::= { apSubnetEntry 5 } -- 1.3.6.1.4.1.388.11.3.5.2.19.1.1.6 apSubnetNativeVlanTagMode OBJECT-TYPE SYNTAX INTEGER { tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the 802.1q native vlan tag mode to untagged or tagged." ::= { apSubnetEntry 6 } -- 1.3.6.1.4.1.388.11.3.5.2.20 apLanTypeFilterAccessMode OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Packets can either be Forwarded or Discarded." ::= { apLan 20 } -- 1.3.6.1.4.1.388.11.3.5.2.21 apLanTypeFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanTypeFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in apLanTypeFilterAccessMode), MU association with each WLAN." ::= { apLan 21 } -- 1.3.6.1.4.1.388.11.3.5.2.21.1 apLanTypeFilterEntry OBJECT-TYPE SYNTAX ApLanTypeFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apLanTypeFilterSubnetIndex, apLanTypeFilterIndex } ::= { apLanTypeFilterTable 1 } ApLanTypeFilterEntry ::= SEQUENCE { apLanTypeFilterSubnetIndex Integer32, apLanTypeFilterIndex Integer32, apLanTypeFilter EthernetType, apLanTypeFilterRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.11.3.5.2.21.1.1 apLanTypeFilterSubnetIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Subnet Index for Type Filter" ::= { apLanTypeFilterEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.2.21.1.2 apLanTypeFilterIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { apLanTypeFilterEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.2.21.1.3 apLanTypeFilter OBJECT-TYPE SYNTAX EthernetType MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet type to be filtered." ::= { apLanTypeFilterEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.2.21.1.4 apLanTypeFilterRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status." ::= { apLanTypeFilterEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.2.22 apLanEthernetPort OBJECT-TYPE SYNTAX INTEGER { lan1(1), lan2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Subnet to which the LAN ethernet port is mapped." ::= { apLan 22 } -- 1.3.6.1.4.1.388.11.3.5.2.23 apLanBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Bridge Spanning Tree for a Subnet." ::= { apLan 23 } -- 1.3.6.1.4.1.388.11.3.5.2.23.1 apLanBridgeEntry OBJECT-TYPE SYNTAX ApLanBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " AUGMENTS { ccSubnetEntry } ::= { apLanBridgeTable 1 } ApLanBridgeEntry ::= SEQUENCE { apLanBridgePriority Integer32, apLanBridgeMaxMsgAge Integer32, apLanBridgeHelloTime Integer32, apLanBridgeFwdDelay Integer32, apLanBridgeEntryAgeout Integer32 } -- 1.3.6.1.4.1.388.11.3.5.2.23.1.1 apLanBridgePriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Priority" ::= { apLanBridgeEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.2.23.1.2 apLanBridgeMaxMsgAge OBJECT-TYPE SYNTAX Integer32 (6..40) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Max Message Age Time." ::= { apLanBridgeEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.2.23.1.3 apLanBridgeHelloTime OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Hello Time." ::= { apLanBridgeEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.2.23.1.4 apLanBridgeFwdDelay OBJECT-TYPE SYNTAX Integer32 (4..30) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Forward Delay." ::= { apLanBridgeEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.2.23.1.5 apLanBridgeEntryAgeout OBJECT-TYPE SYNTAX Integer32 (4..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Forwarding Database Ageout value." ::= { apLanBridgeEntry 5 } -- 1.3.6.1.4.1.388.11.3.5.2.24 apLanPort OBJECT IDENTIFIER ::= { apLan 24 } -- 1.3.6.1.4.1.388.11.3.5.2.24.1 apLanPortAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lan Ethernet Port Auto-Negotiation Value." ::= { apLanPort 1 } -- 1.3.6.1.4.1.388.11.3.5.2.24.2 apLanPortSpeed OBJECT-TYPE SYNTAX INTEGER { tenMbps(0), hundredMbps(1), oneGbps(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lan Ethernet Port Speed Value. AP5131 does not support oneGbps." ::= { apLanPort 2 } -- 1.3.6.1.4.1.388.11.3.5.2.24.3 apLanPortDuplex OBJECT-TYPE SYNTAX INTEGER { half(0), full(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lan Ethernet Port Duplex Value." ::= { apLanPort 3 } -- 1.3.6.1.4.1.388.11.3.5.3 apWnmpPing OBJECT IDENTIFIER ::= { apSwitch 3 } -- 1.3.6.1.4.1.388.11.3.5.3.1 apWnmpPingDestMu OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ping Destination MU Mac Address. This address has to match one of the MU's in the ccMUInfo table." ::= { apWnmpPing 1 } -- 1.3.6.1.4.1.388.11.3.5.3.2 apWnmpPingDestAP OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ping Destination AP Mac Address. This address has to match one of the AP's in apKnownApTable." ::= { apWnmpPing 2 } -- 1.3.6.1.4.1.388.11.3.5.3.3 apWnmpPingDest OBJECT-TYPE SYNTAX INTEGER { mu(1), ap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The destination type of the ping. It can be either an MU or an AP." ::= { apWnmpPing 3 } -- 1.3.6.1.4.1.388.11.3.5.3.4 apWnmpPingNum OBJECT-TYPE SYNTAX Integer32 (1..539) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of pings." ::= { apWnmpPing 4 } -- 1.3.6.1.4.1.388.11.3.5.3.5 apWnmpPingPacketLength OBJECT-TYPE SYNTAX Integer32 (1..539) UNITS "byte" MAX-ACCESS read-write STATUS current DESCRIPTION "Length of the Wnmp ping packet." ::= { apWnmpPing 5 } -- 1.3.6.1.4.1.388.11.3.5.3.6 apWnmpPingPacketData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-write STATUS current DESCRIPTION "The one-byte data pattern used to fill the Wnmp ping packet." ::= { apWnmpPing 6 } -- 1.3.6.1.4.1.388.11.3.5.3.7 apWnmpPingAction OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Start and stop ping. Switching from stop to start state will reset apWnmpPingNumResponses to 0." ::= { apWnmpPing 7 } -- 1.3.6.1.4.1.388.11.3.5.3.8 apWnmpPingNumResponses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ping responses received from the destination." ::= { apWnmpPing 8 } -- 1.3.6.1.4.1.388.11.3.5.4 apFlashLed OBJECT IDENTIFIER ::= { apSwitch 4 } -- 1.3.6.1.4.1.388.11.3.5.4.1 apFlashLedDestAP OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Led flash destination AP Mac Address. This address has to match one of the AP's in apKnownApTable." ::= { apFlashLed 1 } -- 1.3.6.1.4.1.388.11.3.5.4.2 apFlashLedAction OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Turn the led action on or off." ::= { apFlashLed 2 } -- 1.3.6.1.4.1.388.11.3.5.5 apKnownAPList OBJECT IDENTIFIER ::= { apSwitch 5 } -- 1.3.6.1.4.1.388.11.3.5.5.1 apKnownApTable OBJECT-TYPE SYNTAX SEQUENCE OF ApKnownApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Known AP Lists." ::= { apKnownAPList 1 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1 apKnownApEntry OBJECT-TYPE SYNTAX ApKnownApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apKnownApIndex } ::= { apKnownApTable 1 } ApKnownApEntry ::= SEQUENCE { apKnownApIndex Integer32, apKnownApMac PhysAddress, apKnownApIp IpAddress, apKnownApChannel1 Integer32, apKnownApChannel2 Integer32, apKnownApMu Integer32, apKnownApKbPerSec Integer32, apKnownApPktsPerSec Integer32, apKnownApRadioType1 INTEGER, apKnownApRadioType2 INTEGER, apKnownApType INTEGER, apKnownApFwVers DisplayString, apKnownApUnitName DisplayString, apKnownApEssName DisplayString, apKnownApSendCfg DoActionNow, apKnownApSendCfgStatus TruthValue, apKnownApRadio1ClientBridgeMac1 PhysAddress, apKnownApRadio1ClientBridgeMac2 PhysAddress, apKnownApRadio1ClientBridgeMac3 PhysAddress, apKnownApRadio2ClientBridgeMac1 PhysAddress, apKnownApRadio2ClientBridgeMac2 PhysAddress, apKnownApRadio2ClientBridgeMac3 PhysAddress } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.1 apKnownApIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apKnownApEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.2 apKnownApMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address of the LAN port" ::= { apKnownApEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.3 apKnownApIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the LAN port" ::= { apKnownApEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.4 apKnownApChannel1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel for Radio1 in Dual Radio setup" ::= { apKnownApEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.5 apKnownApChannel2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel for Radio2 in Dual Radio setup" ::= { apKnownApEntry 5 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.6 apKnownApMu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MUs associated." ::= { apKnownApEntry 6 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.7 apKnownApKbPerSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Kilo Bytes in/out per second." ::= { apKnownApEntry 7 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.8 apKnownApPktsPerSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of combined input and output packets per sec" ::= { apKnownApEntry 8 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.9 apKnownApRadioType1 OBJECT-TYPE SYNTAX INTEGER { radioA(1), radioB(2), radioBG(3), radioFH(4), radioN(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Type of the first radio in Dual Radio setup" ::= { apKnownApEntry 9 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.10 apKnownApRadioType2 OBJECT-TYPE SYNTAX INTEGER { radioA(1), radioB(2), radioBG(3), radioFH(4), radioN(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Type of the second radio in Dual Radio setup" ::= { apKnownApEntry 10 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.11 apKnownApType OBJECT-TYPE SYNTAX INTEGER { unknown(0), ap5131(1), ap4131(2), ap41x1(3), ap302x(4), ap71x1(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware Type." ::= { apKnownApEntry 11 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.12 apKnownApFwVers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware Version" ::= { apKnownApEntry 12 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.13 apKnownApUnitName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "System Name." ::= { apKnownApEntry 13 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.14 apKnownApEssName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ESSID of the particular WLAN." ::= { apKnownApEntry 14 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.15 apKnownApSendCfg OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Copy Configuration file button. When set to 1 the config file of our AP shall be copied onto the Known AP specified." ::= { apKnownApEntry 15 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.16 apKnownApSendCfgStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether a copy cfg operation succeeded. " ::= { apKnownApEntry 16 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.17 apKnownApRadio1ClientBridgeMac1 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Client Bridge MAC Address 1 on Radio 1." ::= { apKnownApEntry 17 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.18 apKnownApRadio1ClientBridgeMac2 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Client Bridge MAC Address 2 on Radio 1." ::= { apKnownApEntry 18 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.19 apKnownApRadio1ClientBridgeMac3 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Client Bridge MAC Address 3 on Radio 1." ::= { apKnownApEntry 19 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.20 apKnownApRadio2ClientBridgeMac1 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Client Bridge MAC Address 1 on Radio 2." ::= { apKnownApEntry 20 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.21 apKnownApRadio2ClientBridgeMac2 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Client Bridge MAC Address 2 on Radio 2." ::= { apKnownApEntry 21 } -- 1.3.6.1.4.1.388.11.3.5.5.1.1.22 apKnownApRadio2ClientBridgeMac3 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Client Bridge MAC Address 3 on Radio 2." ::= { apKnownApEntry 22 } -- 1.3.6.1.4.1.388.11.3.5.6 apAap OBJECT IDENTIFIER ::= { apSwitch 6 } -- 1.3.6.1.4.1.388.11.3.5.6.1 apAapSwitchAutoDiscoveryEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value true means Hybrid AP Switch Auto Discovery is enabled and false means it is disabled." ::= { apAap 1 } -- 1.3.6.1.4.1.388.11.3.5.6.2 apAapSwitchDiscoveryInterface OBJECT-TYPE SYNTAX INTEGER { wan(1), lan1(2), lan2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid AP Switch Discovery Interface." ::= { apAap 2 } -- 1.3.6.1.4.1.388.11.3.5.6.3 apAapSwitchDiscoveryIPAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAapSwitchDiscoveryIPAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of static IP addresses used in Switch Discovery for Hybrid AP. " ::= { apAap 3 } -- 1.3.6.1.4.1.388.11.3.5.6.3.1 apAapSwitchDiscoveryIPAddressEntry OBJECT-TYPE SYNTAX ApAapSwitchDiscoveryIPAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "apSwitchDiscoveryIPAddressEntry" INDEX { apAapSwitchDiscoveryIPAddressIndex } ::= { apAapSwitchDiscoveryIPAddressTable 1 } ApAapSwitchDiscoveryIPAddressEntry ::= SEQUENCE { apAapSwitchDiscoveryIPAddressIndex Integer32, apAapSwitchDiscoveryIPAddress IpAddress, apAapSwitchDiscoveryIPAddressRowStatus INTEGER } -- 1.3.6.1.4.1.388.11.3.5.6.3.1.1 apAapSwitchDiscoveryIPAddressIndex OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index (1...6)" ::= { apAapSwitchDiscoveryIPAddressEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.6.3.1.2 apAapSwitchDiscoveryIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid AP Switch Discovery IP Address." ::= { apAapSwitchDiscoveryIPAddressEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.6.3.1.3 apAapSwitchDiscoveryIPAddressRowStatus OBJECT-TYPE SYNTAX INTEGER { destroy(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Simple Row Status." ::= { apAapSwitchDiscoveryIPAddressEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.6.4 apAapSwitchDiscoveryDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid AP Switch Discovery Domain Name." ::= { apAap 4 } -- 1.3.6.1.4.1.388.11.3.5.6.5 apAapSwitchDiscoveryPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid AP Switch Discovery Port." ::= { apAap 5 } -- 1.3.6.1.4.1.388.11.3.5.6.6 apAapPassphrase OBJECT-TYPE SYNTAX Password (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid AP Passphrase. Before the AP sends the first packet to request mode and configuration, the switch and the AP should establish a secure link with this pre-shared key or passphrase." ::= { apAap 6 } -- 1.3.6.1.4.1.388.11.3.5.6.7 apAapTunnelToSwitchEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This boolean is used by the AP to determine if it needs to establish a secure IPSEC tunnel to the switch." ::= { apAap 7 } -- 1.3.6.1.4.1.388.11.3.5.6.8 apAapAcKeepAlive OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "AC Keepalive Period." ::= { apAap 8 } -- 1.3.6.1.4.1.388.11.3.5.6.9 apAapAdoptionState OBJECT-TYPE SYNTAX INTEGER { standAlone(1), waiting(2), adoptionFailed(3), adopted(4), connectionLoss(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The adoption state of the hybrid AP." ::= { apAap 9 } -- 1.3.6.1.4.1.388.11.3.5.6.10 apAapAdoptingSwitchIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the switch that has currently adopted this hybrid AP. If the AP is not adopted it gives the IP address of the switch that last adopted the AP. This value is null if the AP has never been adopted." ::= { apAap 10 } -- 1.3.6.1.4.1.388.11.3.5.7 apWirelessWan OBJECT IDENTIFIER ::= { apSwitch 7 } -- 1.3.6.1.4.1.388.11.3.5.7.1 apWirelessWanTable OBJECT-TYPE SYNTAX SEQUENCE OF ApWirelessWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PPP settings for Wireless WAN interface" ::= { apWirelessWan 1 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1 apWirelessWanEntry OBJECT-TYPE SYNTAX ApWirelessWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ccWanIndex } ::= { apWirelessWanTable 1 } ApWirelessWanEntry ::= SEQUENCE { apWirelessWanMode INTEGER, apWirelessWanUsername DisplayString, apWirelessWanPassword DisplayString, apWirelessWanState INTEGER, apWirelessWanRemoteGw1 IpAddress, apWirelessWanRemoteGw2 IpAddress, apWirelessWanRemoteGw3 IpAddress, apWirelessWanTunnelRequired TruthValue, apWirelessWanTunnelRemoteIp IpAddress, apWirelessWanTunnelPassPhrase DisplayString, apWirelessWanTunnelRemoteGateway IpAddress, apWirelessWanTunnelEncryptionType INTEGER, apWirelessWanTunnelRemoteSubnetMask IpAddress, apWirelessWanTunnelInterface INTEGER, apWirelessWanApName DisplayString } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.1 apWirelessWanMode OBJECT-TYPE SYNTAX INTEGER { disable(1), failover(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disable/Failover Wireless WAN interface" ::= { apWirelessWanEntry 1 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.2 apWirelessWanUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (1..47)) MAX-ACCESS read-write STATUS current DESCRIPTION "PPP username" ::= { apWirelessWanEntry 2 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.3 apWirelessWanPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "PPP password" ::= { apWirelessWanEntry 3 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.4 apWirelessWanState OBJECT-TYPE SYNTAX INTEGER { idle(0), connecting(1), configuring(2), connected(3), disconnecting(4), maxState(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Wireless Wan State" ::= { apWirelessWanEntry 4 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.5 apWirelessWanRemoteGw1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless Wan remote gateway server 1" DEFVAL { 0 } ::= { apWirelessWanEntry 5 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.6 apWirelessWanRemoteGw2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless Wan remote gateway server 2" DEFVAL { 0 } ::= { apWirelessWanEntry 6 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.7 apWirelessWanRemoteGw3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless Wan remote gateway server 3" DEFVAL { 0 } ::= { apWirelessWanEntry 7 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.8 apWirelessWanTunnelRequired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable/Enable Wireless WAN Tunnel Support." ::= { apWirelessWanEntry 8 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.9 apWirelessWanTunnelRemoteIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless Wan remote Tunnel IP Address." ::= { apWirelessWanEntry 9 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.10 apWirelessWanTunnelPassPhrase OBJECT-TYPE SYNTAX DisplayString (SIZE (1..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless WAN Tunnel Pass Phrase." ::= { apWirelessWanEntry 10 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.11 apWirelessWanTunnelRemoteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless Wan tunnel remote gateway." ::= { apWirelessWanEntry 11 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.12 apWirelessWanTunnelEncryptionType OBJECT-TYPE SYNTAX INTEGER { aes256(1), aes128(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Tunnel Encryption Type for Wireless WAN." ::= { apWirelessWanEntry 12 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.13 apWirelessWanTunnelRemoteSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless Wan tunnel remote Subnet Mask." ::= { apWirelessWanEntry 13 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.14 apWirelessWanTunnelInterface OBJECT-TYPE SYNTAX INTEGER { lan1(1), lan2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Tunnel Interface(LAN1 or LAN2)." ::= { apWirelessWanEntry 14 } -- 1.3.6.1.4.1.388.11.3.5.7.1.1.15 apWirelessWanApName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless WAN AP Name." ::= { apWirelessWanEntry 15 } -- 1.3.6.1.4.1.388.11.3.5.8 apLldp OBJECT IDENTIFIER ::= { apSwitch 8 } -- 1.3.6.1.4.1.388.11.3.5.8.1 apLldpAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively desired status of the local LLDP agent. If the associated apLldpAdminStatus object has a value of 'enabled(1)', then LLDP agent will transmit LLDP frames. If the associated apLldpAdminStatus object has a value of 'disabled(2)', then LLDP agent will not transmit LLDP frame.." ::= { apLldp 1 } -- 1.3.6.1.4.1.388.11.3.5.8.2 apLldpTxInterval OBJECT-TYPE SYNTAX Integer32 (30..32768) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which LLDP frames is transmitted on behalf of this LLDP agent. The default value for apLldpTxInterval object is 30 seconds.." ::= { apLldp 2 } -- 1.3.6.1.4.1.388.11.3.5.8.3 apLldpTxHoldMultiplier OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The time-to-live value is expressed as a multiple of the apLldpTxHoldMultiplier object. The actual time-to-live value used in LLDP frames transmitted on behalf of this LLDP agent is expressed by the following formula: TTL = min(65535, (apLldpTxInterval * apLldpTxHoldMultiplier)). For example, if the value of apLldpTxInterval is '30', and the value of apLldpTxHoldMultiplier is '4', then the value '120' is encoded in the TTL field of the LLDP header. The default value for apLldpTxHoldMultiplier object is 4." ::= { apLldp 3 } -- 1.3.6.1.4.1.388.11.3.6 apNotifications OBJECT IDENTIFIER ::= { abgAP 6 } -- 1.3.6.1.4.1.388.11.3.6.1 apMuVlan NOTIFICATION-TYPE OBJECTS { apTrapMuMac, apTrapRadioMac, apTrapVlanId } STATUS current DESCRIPTION "A MU has been associated with this Radio Address." ::= { apNotifications 1 } -- 1.3.6.1.4.1.388.11.3.6.2 apLanMonitor NOTIFICATION-TYPE OBJECTS { apTrapLanMonitorMode, apTrapLanMonitorReason } STATUS current DESCRIPTION "Radios are either been SHUTTING DOWN or RESTORING because of a certain activity at LAN Port." ::= { apNotifications 2 } -- 1.3.6.1.4.1.388.11.3.6.3 apWpaCounterMeasure NOTIFICATION-TYPE OBJECTS { apTrapWpaCounterMeasureEssid } STATUS current DESCRIPTION "When a subsequent MIC failure occurs within 60 seconds of the preceding failure, the AP will disassociate all associated STAs. The AP will not deliver any class 3 TKIP encrypted data frames to or from any peer as well as disallow new associations for a period of 60 seconds." ::= { apNotifications 3 } -- 1.3.6.1.4.1.388.11.3.6.4 apMuHotspotState NOTIFICATION-TYPE OBJECTS { apTrapCtrlMuMac, apTrapCtrlMuHotspotStateChange } STATUS current DESCRIPTION "An MU is either Authenticated or Deauthenticated on a Hotspot enabled WLAN. Upon authenticating with a Radius Server the state of the MU is changed from HOTSPOT to DATA_READY and the vice versa upon Time out or Logging out of that particular MU." ::= { apNotifications 4 } -- 1.3.6.1.4.1.388.11.3.6.5 apDynDNSUpdate NOTIFICATION-TYPE OBJECTS { apTrapCtrlDynDNSUpdateIp, apTrapCtrlDynDNSUpdateHostname, apTrapCtrlDynDNSUpdateStatus } STATUS current DESCRIPTION "A DynDNS Update has been sent to DynDns.org" ::= { apNotifications 5 } -- 1.3.6.1.4.1.388.11.3.6.6 apWlanKerberosAuthFailed NOTIFICATION-TYPE OBJECTS { apWlanIndex } STATUS current DESCRIPTION "A WLAN failed to authenticate to the Kerberos server." ::= { apNotifications 6 } -- 1.3.6.1.4.1.388.11.3.6.7 apWirelessWanCardPresent NOTIFICATION-TYPE OBJECTS { apTrapWirelessWanXCRDPresentStatus } STATUS current DESCRIPTION "When the AP detects the presence of a wireless WAN card." ::= { apNotifications 7 } -- 1.3.6.1.4.1.388.11.3.6.8 apWirelessWanCardState NOTIFICATION-TYPE OBJECTS { apTrapWirelessWanDetectStatus } STATUS current DESCRIPTION "When the AP detects the removal of a wireless WAN card." ::= { apNotifications 8 } -- 1.3.6.1.4.1.388.11.3.6.9 apWirelessWanConnect NOTIFICATION-TYPE OBJECTS { apTrapWirelessWanConnectionStatus } STATUS current DESCRIPTION "When the AP establishes a wireless WAN connection successfully." ::= { apNotifications 9 } -- 1.3.6.1.4.1.388.11.3.6.10 apWirelessWanDisconnect NOTIFICATION-TYPE OBJECTS { apTrapWirelessWanConnectionStatus } STATUS current DESCRIPTION "When the AP detects a wireless WWAN disconnection." ::= { apNotifications 10 } -- 1.3.6.1.4.1.388.11.3.6.1000 apTrapCtrl OBJECT IDENTIFIER ::= { apNotifications 1000 } -- 1.3.6.1.4.1.388.11.3.6.1000.1 apTrapCtrlEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF ApTrapCtrlEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Trap Enable entries." ::= { apTrapCtrl 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.1.1 apTrapCtrlEnableEntry OBJECT-TYPE SYNTAX ApTrapCtrlEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apTrapCtrlEnableIndex } ::= { apTrapCtrlEnableTable 1 } ApTrapCtrlEnableEntry ::= SEQUENCE { apTrapCtrlEnableIndex Integer32, apTrapCtrlEnableName DisplayString, apTrapCtrlEnable TruthValue } -- 1.3.6.1.4.1.388.11.3.6.1000.1.1.1 apTrapCtrlEnableIndex OBJECT-TYPE SYNTAX Integer32 (1..18) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apTrapCtrlEnableEntry 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.1.1.2 apTrapCtrlEnableName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the Trap." ::= { apTrapCtrlEnableEntry 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.1.1.3 apTrapCtrlEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disbale a particular Trap." ::= { apTrapCtrlEnableEntry 3 } -- 1.3.6.1.4.1.388.11.3.6.1000.2 apTrapCtrlRateLimit OBJECT-TYPE SYNTAX Unsigned32 (0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The max rate at which SNMP traps/notifications will be sent from the switch. If the switch detects a particular condition and it has NOT been at least this many seconds since the last trap/notification, this current event will NOT result in a trap/notification. If this value is set to 0, every such event results in a trap/notification. Factory-default state is 10 [seconds]. " ::= { apTrapCtrl 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.3 apTrapCtrlSumStats OBJECT IDENTIFIER ::= { apTrapCtrl 3 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1 apTrapCtrlSumStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApTrapCtrlSumStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table configures thresholds that can be monitored for - all MUs and/or - all Portals and/or - all WLANs and/or - for the entire switch When a given threshold is crossed, it generates the appropriate corresponding notification, (ccSumStats_: _MU, _Portal, _WLAN, or _Switch). Some thresholds result in notifications when exceeded, and some when the current value sinks below the threshold. This is indicated by the wording of the entry in the entry's _Descr value. In all cases, the summary stat being monitored is the Short value, never the Long value. Note that for thresholds of type thresholdsAvgMuSignal & thresholdsAvgMuNoise, the values being 'watched' are actually negative. In these cases the threshold is specified as a Unsigned32. For example, if you wish to trap on Signal being worse than -75dBm, enter '70'. This works since a user would never want to trap on a threshold of Sinal worse than +10dBm. (SNR is not an issue, since that is a positive value). Any values reported as var-binds in the resultant trap(s) are likewise reported as positive values." ::= { apTrapCtrlSumStats 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1 apTrapCtrlSumStatsEntry OBJECT-TYPE SYNTAX ApTrapCtrlSumStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rows/instances in this table occur at the exact same indices as the corresponding monitored data occurs in the _SumStats tables. For example, row #2 / instance .2 represents the threshold(s) for the _PktsPerSec values for MU, Portal, WLAN, and Switch. If a given threshold does not make sense for one of those 4 entities, its corresponding TruthValue will be false." INDEX { apTrapCtrlSumStatsIndex } ::= { apTrapCtrlSumStatsTable 1 } ApTrapCtrlSumStatsEntry ::= SEQUENCE { apTrapCtrlSumStatsIndex INTEGER, apTrapCtrlSumStatsDescr DisplayString, apTrapCtrlSumStatsUnits DisplayString, apTrapCtrlSumStatsCanBeSetMu TruthValue, apTrapCtrlSumStatsThresholdMu Unsigned32, apTrapCtrlSumStatsCanBeSetRadioA TruthValue, apTrapCtrlSumStatsThresholdRadioA Unsigned32, apTrapCtrlSumStatsCanBeSetRadioBG TruthValue, apTrapCtrlSumStatsThresholdRadioBG Unsigned32, apTrapCtrlSumStatsCanBeSetWlan TruthValue, apTrapCtrlSumStatsThresholdWlans Unsigned32, apTrapCtrlSumStatsCanBeSetAccessPoint TruthValue, apTrapCtrlSumStatsThresholdAccessPoint Unsigned32, apTrapCtrlSumStatsCanBeSetRadioN5000MHz TruthValue, apTrapCtrlSumStatsThresholdRadioN5000MHz Unsigned32, apTrapCtrlSumStatsCanBeSetRadioN2400MHz TruthValue, apTrapCtrlSumStatsThresholdRadioN2400MHz Unsigned32 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.1 apTrapCtrlSumStatsIndex OBJECT-TYPE SYNTAX INTEGER { unusedTimestamp(1), unusedNumPkts(2), thresholdsPktsPerSec(3), unusedPktsPerSecTx(4), unusedPktsPerSecRx(5), thresholdsThroughput(6), unusedThroughputTx(7), unusedThroughputRx(8), thresholdsAvgBitSpeed(9), thresholdsAvgMuSignal(10), thresholdsAvgMuNoise(11), thresholdsAvgMuSnr(12), thresholdsPctNUcastPkts(13), thresholdsPpmTxWithRetires(14), thresholdsPpmTxDropped(15), thresholdsTxAvgRetries(16), thresholdsPpmRxUndecrypt(17), thresholdsTotalMus(18), thresholdsPctRfUtil(19), thresholdsPctDropped(20) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index into table. Note that specific thresholds occur at specific instance values as denoted by the enumeration values assigned to this variable." ::= { apTrapCtrlSumStatsEntry 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.2 apTrapCtrlSumStatsDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the threshold." ::= { apTrapCtrlSumStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.3 apTrapCtrlSumStatsUnits OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Units of the threshold." ::= { apTrapCtrlSumStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.4 apTrapCtrlSumStatsCanBeSetMu OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for MUs. If false, attempting the threshold will return a READ-ONLY." ::= { apTrapCtrlSumStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.5 apTrapCtrlSumStatsThresholdMu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for all MUs. If 0, no threshold checking is performed.( multipled by 100)" ::= { apTrapCtrlSumStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.6 apTrapCtrlSumStatsCanBeSetRadioA OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for radio a. If false, attempting the threshold will return a READ-ONLY. Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsCanBeSetRadioN2400MHz or apTrapCtrlSumStatsCanBeSetRadioN5000MHz for 802.11n radios." ::= { apTrapCtrlSumStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.7 apTrapCtrlSumStatsThresholdRadioA OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for radio a. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9) Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsThresholdRadioN2400MHz or apTrapCtrlSumStatsThresholdRadioN5000MHz for 802.11n radios." ::= { apTrapCtrlSumStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.8 apTrapCtrlSumStatsCanBeSetRadioBG OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for radio b/g. If false, attempting the threshold will return a READ-ONLY. Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsCanBeSetRadioN2400MHz or apTrapCtrlSumStatsCanBeSetRadioN5000MHz for 802.11n radios." ::= { apTrapCtrlSumStatsEntry 8 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.9 apTrapCtrlSumStatsThresholdRadioBG OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for radio b/g. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9) Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsThresholdRadioN2400MHz or apTrapCtrlSumStatsThresholdRadioN5000MHz for 802.11n radios." ::= { apTrapCtrlSumStatsEntry 9 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.10 apTrapCtrlSumStatsCanBeSetWlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for Wlans. If false, attempting the threshold will return a READ-ONLY." ::= { apTrapCtrlSumStatsEntry 10 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.11 apTrapCtrlSumStatsThresholdWlans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for all Wlans. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)" ::= { apTrapCtrlSumStatsEntry 11 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.12 apTrapCtrlSumStatsCanBeSetAccessPoint OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for the entire access point. If false, attempting the threshold will return a READ-ONLY." ::= { apTrapCtrlSumStatsEntry 12 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.13 apTrapCtrlSumStatsThresholdAccessPoint OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for the entire Access Point. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)" ::= { apTrapCtrlSumStatsEntry 13 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.14 apTrapCtrlSumStatsCanBeSetRadioN5000MHz OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for radio n, 5.0 GHz frequency band. If false, attempting the threshold will return a READ-ONLY." ::= { apTrapCtrlSumStatsEntry 14 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.15 apTrapCtrlSumStatsThresholdRadioN5000MHz OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for radio n, 5.0 GHz frequency band. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)." ::= { apTrapCtrlSumStatsEntry 15 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.16 apTrapCtrlSumStatsCanBeSetRadioN2400MHz OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the threshold can be set for radio n, 2.4 GHz frequency band. If false, attempting the threshold will return a READ-ONLY." ::= { apTrapCtrlSumStatsEntry 16 } -- 1.3.6.1.4.1.388.11.3.6.1000.3.1.1.17 apTrapCtrlSumStatsThresholdRadioN2400MHz OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for radio n, 2.4 GHz frequency band. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)." ::= { apTrapCtrlSumStatsEntry 17 } -- 1.3.6.1.4.1.388.11.3.6.1000.4 apTrapMuVlan OBJECT IDENTIFIER ::= { apTrapCtrl 4 } -- 1.3.6.1.4.1.388.11.3.6.1000.4.1 apTrapMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MU that has been associated." ::= { apTrapMuVlan 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.4.2 apTrapRadioMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Radio to be which MU has been associated." ::= { apTrapMuVlan 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.4.3 apTrapVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Dynamic VLAN ID assigned to the MU." ::= { apTrapMuVlan 3 } -- 1.3.6.1.4.1.388.11.3.6.1000.5 apTrapLanMonitor OBJECT IDENTIFIER ::= { apTrapCtrl 5 } -- 1.3.6.1.4.1.388.11.3.6.1000.5.1 apTrapLanMonitorMode OBJECT-TYPE SYNTAX INTEGER { radioShutdown(1), radioRestore(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action taken by the Radios either Shutting Down or Restoring Up." ::= { apTrapLanMonitor 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.5.2 apTrapLanMonitorReason OBJECT-TYPE SYNTAX INTEGER { disabled(1), hardwareDetect(2), timeout(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Activity at the LAN port which caused this event to happen." ::= { apTrapLanMonitor 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.6 apTrapWpaCounterMeasure OBJECT IDENTIFIER ::= { apTrapCtrl 6 } -- 1.3.6.1.4.1.388.11.3.6.1000.6.1 apTrapWpaCounterMeasureEssid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ESSID for which MIC failure happened." ::= { apTrapWpaCounterMeasure 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.7 apTrapCtrlMuHotspotState OBJECT IDENTIFIER ::= { apTrapCtrl 7 } -- 1.3.6.1.4.1.388.11.3.6.1000.7.1 apTrapCtrlMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MAC Address of the MU which undergoes a state changed on a Hotspot enabled WLAN." ::= { apTrapCtrlMuHotspotState 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.7.2 apTrapCtrlMuHotspotStateChange OBJECT-TYPE SYNTAX INTEGER { fromHotspotToDataReady(1), fromDataReadyToHotspot(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The change in the state of an MU associated on a Hotspot enabled WLAN." ::= { apTrapCtrlMuHotspotState 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.8 apTrapCtrlDynDNSUpdate OBJECT IDENTIFIER ::= { apTrapCtrl 8 } -- 1.3.6.1.4.1.388.11.3.6.1000.8.1 apTrapCtrlDynDNSUpdateIp OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apTrapCtrlDynDNSUpdate 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.8.2 apTrapCtrlDynDNSUpdateHostname OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apTrapCtrlDynDNSUpdate 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.8.3 apTrapCtrlDynDNSUpdateStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apTrapCtrlDynDNSUpdate 3 } -- 1.3.6.1.4.1.388.11.3.6.1000.9 apTrapWirelessWan OBJECT IDENTIFIER ::= { apTrapCtrl 9 } -- 1.3.6.1.4.1.388.11.3.6.1000.9.1 apTrapWirelessWanXCRDPresentStatus OBJECT-TYPE SYNTAX INTEGER { removed(1), inserted(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Removed/Inserted Wireless WAN interface." ::= { apTrapWirelessWan 1 } -- 1.3.6.1.4.1.388.11.3.6.1000.9.2 apTrapWirelessWanDetectStatus OBJECT-TYPE SYNTAX INTEGER { down(1), up(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Up/Down Wireless WAN interface." ::= { apTrapWirelessWan 2 } -- 1.3.6.1.4.1.388.11.3.6.1000.9.3 apTrapWirelessWanConnectionStatus OBJECT-TYPE SYNTAX INTEGER { fail(1), success(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Fail/Success Wireless WAN interface." ::= { apTrapWirelessWan 3 } -- 1.3.6.1.4.1.388.11.3.7 apRap OBJECT IDENTIFIER ::= { abgAP 7 } -- 1.3.6.1.4.1.388.11.3.7.1 apRapControl OBJECT IDENTIFIER ::= { apRap 1 } -- 1.3.6.1.4.1.388.11.3.7.1.1 apRapControlDetectors OBJECT IDENTIFIER ::= { apRapControl 1 } -- 1.3.6.1.4.1.388.11.3.7.1.1.1 apRapDetectorMode OBJECT-TYPE SYNTAX INTEGER { scanDisable(1), scanA(2), scanBG(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Detector Mode and Band for RF scan. It can either be specified to A band or BG band. This setting does not apply to 802.11n radios." ::= { apRapControlDetectors 1 } -- 1.3.6.1.4.1.388.11.3.7.1.1.2 apRapDetectorABGMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Detector Mode to scan both A and BG Bands. apRapDetectorMode is used to determine which radio to use. This setting does not apply to 802.11n radios." ::= { apRapControlDetectors 2 } -- Values used to initiate (via FTP only), a -- download of a configuration file to the switch, -- or an upload of a configuration file from the -- switch. -- -- All items in this group persist across reboots, -- except: _CfgOperation and _CfgStart. -- 1.3.6.1.4.1.388.11.3.8 apLoadCfg OBJECT IDENTIFIER ::= { abgAP 8 } -- 1.3.6.1.4.1.388.11.3.8.1 apLoadCfgOperation OBJECT-TYPE SYNTAX INTEGER { unspecified(1), ftpConfigServerToAP(2), ftpConfigAPToServer(3), tftpConfigServerToAP(4), tftpConfigAPToServer(5), sftpConfigServerToAP(6), sftpConfigAPToServer(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the type and direction of the transfer to perform involving the configuration file." ::= { apLoadCfg 1 } -- 1.3.6.1.4.1.388.11.3.8.2 apLoadCfgServerPath OBJECT-TYPE SYNTAX DisplayString (SIZE (0..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path to the firmware on the TFTP/FTP server. Remember that the type of separator varies depending on the operating system of the server. For Windows, use '\', for Unix use '/'. No path need be specified, (in which case the default directory for the TFTP/FTP server will be used); if a path is specified, remember to terminate it with a trailing '/' or '\'." ::= { apLoadCfg 2 } -- 1.3.6.1.4.1.388.11.3.8.3 apLoadCfgServerFilename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name, (on the server), of the configuration file to load/store from/to the server." ::= { apLoadCfg 3 } -- 1.3.6.1.4.1.388.11.3.8.4 apLoadCfgServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the server used for a configuration file load/store operation." ::= { apLoadCfg 4 } -- 1.3.6.1.4.1.388.11.3.8.5 apLoadCfgFtpUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Username for FTP LoadCfg operations." ::= { apLoadCfg 5 } -- 1.3.6.1.4.1.388.11.3.8.6 apLoadCfgFtpPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for FTP LoadCfg operations." ::= { apLoadCfg 6 } -- 1.3.6.1.4.1.388.11.3.8.7 apLoadCfgStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set this value to start the configuration file operation. Note that unlike a firmware load, the actual FTP/TFTP transfer does begin virtually immediately." ::= { apLoadCfg 7 } -- 1.3.6.1.4.1.388.11.3.8.8 apLoadCfgOperationsDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value counts the total number of configuration file transfers completed, (whether they succeed or fail). The SNMP manager should save the value of this counter just before starting a LoadCfg operation, and then wait for this value to increment before checking the Result and/or Success values." ::= { apLoadCfg 8 } -- 1.3.6.1.4.1.388.11.3.8.9 apLoadCfgResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value reflects the result of the most-recent configuration file load/store." ::= { apLoadCfg 9 } -- 1.3.6.1.4.1.388.11.3.8.10 apLoadCfgSuccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The success/failure status of the most recent configuration file load/store." ::= { apLoadCfg 10 } -- 1.3.6.1.4.1.388.11.3.9 apStats OBJECT IDENTIFIER ::= { abgAP 9 } -- 1.3.6.1.4.1.388.11.3.9.1 apWanClearStats OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the WAN stats." ::= { apStats 1 } -- 1.3.6.1.4.1.388.11.3.9.2 apLanClearStats OBJECT-TYPE SYNTAX INTEGER { lan1(1), lan2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the LAN stats. For clearing LAN1 stats set to lan1 (1) and for clearing LAN2 stats set to lan2 (2)." ::= { apStats 2 } -- 1.3.6.1.4.1.388.11.3.9.3 apRadioClearStats OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the Radio stats." ::= { apStats 3 } -- 1.3.6.1.4.1.388.11.3.9.4 apWlanClearStats OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the WLAN stats." ::= { apStats 4 } -- 1.3.6.1.4.1.388.11.3.9.5 apMuClearStats OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the MU stats." ::= { apStats 5 } -- 1.3.6.1.4.1.388.11.3.9.6 apKnownAPClearStats OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the Known AP List." ::= { apStats 6 } -- 1.3.6.1.4.1.388.11.3.9.7 apWirelessAPStats OBJECT IDENTIFIER ::= { apStats 7 } -- 1.3.6.1.4.1.388.11.3.9.7.1 apMeshStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMeshStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MESH Bridge Statistics" ::= { apWirelessAPStats 1 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1 apMeshStatsEntry OBJECT-TYPE SYNTAX ApMeshStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apMeshStatsIndex } ::= { apMeshStatsTable 1 } ApMeshStatsEntry ::= SEQUENCE { apMeshStatsIndex Integer32, apMeshStatsConnType INTEGER, apMeshStatsMac PhysAddress, apMeshStatsWlanPtr SinglePointer, apMeshStatsRadioType INTEGER, apMeshStatsThroughput Integer32, apMeshStatsAvgBitSpeed Integer32, apMeshStatsRetries Integer32 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.1 apMeshStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apMeshStatsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.2 apMeshStatsConnType OBJECT-TYPE SYNTAX INTEGER { none(1), baseBridge(2), clientBridge(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "MESH Connection Type." ::= { apMeshStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.3 apMeshStatsMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address." ::= { apMeshStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.4 apMeshStatsWlanPtr OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-only STATUS current DESCRIPTION "WLAN Pointer." ::= { apMeshStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.5 apMeshStatsRadioType OBJECT-TYPE SYNTAX INTEGER { dot11a(1), dot11bg(2), dot11n2400MHz(3), dot11n5000MHz(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Type. 'dot11a' means an 802.11a standard radio that uses the 5GHz band. 'dot11bg' means an 802.11b and 802.11g standards radio that uses the 2.4 GHz band. 'dot11n' means an 802.11n radio can use both 2.4 GHz and/or 5 GHz bands." ::= { apMeshStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.6 apMeshStatsThroughput OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Throughput (x 100)." ::= { apMeshStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.7 apMeshStatsAvgBitSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Speed (x 100)." ::= { apMeshStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.7.1.1.8 apMeshStatsRetries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Retries (x 100)." ::= { apMeshStatsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.7.2 apMeshBridgeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMeshBridgeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MESH Wireless Bridge Statistics." ::= { apWirelessAPStats 2 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1 apMeshBridgeStatsEntry OBJECT-TYPE SYNTAX ApMeshBridgeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apMeshBridgeStatsIndex } ::= { apMeshBridgeStatsTable 1 } ApMeshBridgeStatsEntry ::= SEQUENCE { apMeshBridgeStatsIndex Integer32, apMeshBridgeStatsMac PhysAddress, apMeshBridgeStatsWlanPtr SinglePointer, apMeshBridgeStatsLanPtr SinglePointer, apMeshBridgeStatsRadioType INTEGER, apMeshBridgeStatsAuthType INTEGER, apMeshBridgeStatsEncType INTEGER, apMeshBridgeStatsPktsPerSecRx Integer32, apMeshBridgeStatsPksPerSecTx Integer32, apMeshBridgeStatsPktsPerSecTotal Integer32, apMeshBridgeStatsThroughputRx Integer32, apMeshBridgeStatsThroughputTx Integer32, apMeshBridgeStatsThroughputTotal Integer32, apMeshBridgeStatsAvgBitSpeed Integer32, apMeshBridgeStatsAvgMuSignal Integer32, apMeshBridgeStatsAvgMuNoise Integer32, apMeshBridgeStatsAvgMuSnr Integer32, apMeshBridgeStatsAvgRetries Integer32, apMeshBridgeStatsPktsDropped Integer32, apMeshBridgeStatsUndecryptablePkts Integer32 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.1 apMeshBridgeStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apMeshBridgeStatsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.2 apMeshBridgeStatsMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address." ::= { apMeshBridgeStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.3 apMeshBridgeStatsWlanPtr OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-only STATUS current DESCRIPTION "WLAN Pointer." ::= { apMeshBridgeStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.4 apMeshBridgeStatsLanPtr OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-only STATUS current DESCRIPTION "LAN Pointer." ::= { apMeshBridgeStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.5 apMeshBridgeStatsRadioType OBJECT-TYPE SYNTAX INTEGER { dot11a(1), dot11bg(2), dot11n2400MHz(3), dot11n5000MHz(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Type. 'dot11a' means an 802.11a standard radio that uses the 5GHz band. 'dot11bg' means an 802.11b and 802.11g standards radio that uses the 2.4 GHz band. 'dot11n' means an 802.11n radio can use both 2.4 GHz and/or 5 GHz bands." ::= { apMeshBridgeStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.6 apMeshBridgeStatsAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), eap(2), kerberos(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication method." ::= { apMeshBridgeStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.7 apMeshBridgeStatsEncType OBJECT-TYPE SYNTAX INTEGER { none(1), wep64(2), wep128(3), keyguard(4), wpaTkip(5), wpa2Ccmp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption method." ::= { apMeshBridgeStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.8 apMeshBridgeStatsPktsPerSecRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received per second." ::= { apMeshBridgeStatsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.9 apMeshBridgeStatsPksPerSecTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets transmitted per second." ::= { apMeshBridgeStatsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.10 apMeshBridgeStatsPktsPerSecTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Packets per second." ::= { apMeshBridgeStatsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.11 apMeshBridgeStatsThroughputRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Throughput received (x 100)." ::= { apMeshBridgeStatsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.12 apMeshBridgeStatsThroughputTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Throughput transmitted (x 100)." ::= { apMeshBridgeStatsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.13 apMeshBridgeStatsThroughputTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Throughput (x 100)." ::= { apMeshBridgeStatsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.14 apMeshBridgeStatsAvgBitSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Speed (x 100)." ::= { apMeshBridgeStatsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.15 apMeshBridgeStatsAvgMuSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average MU Signal (x 100)." ::= { apMeshBridgeStatsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.16 apMeshBridgeStatsAvgMuNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average MU Noise (x 100)." ::= { apMeshBridgeStatsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.17 apMeshBridgeStatsAvgMuSnr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average MU Signal to Noise ratio (x 100)." ::= { apMeshBridgeStatsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.18 apMeshBridgeStatsAvgRetries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Retries (x 100)." ::= { apMeshBridgeStatsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.19 apMeshBridgeStatsPktsDropped OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of Packets dropped (x 100)." ::= { apMeshBridgeStatsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.7.2.1.20 apMeshBridgeStatsUndecryptablePkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of Undecryptable Packets (x 100)." ::= { apMeshBridgeStatsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.7.3 apLanSTPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanSTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN Spanning Tree Statistics." ::= { apWirelessAPStats 3 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1 apLanSTPStatsEntry OBJECT-TYPE SYNTAX ApLanSTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " AUGMENTS { ccSubnetEntry } ::= { apLanSTPStatsTable 1 } ApLanSTPStatsEntry ::= SEQUENCE { apLanSTPStatsDesignatedRoot OCTET STRING, apLanSTPStatsBridgeId OCTET STRING, apLanSTPStatsRootPort Integer32, apLanSTPStatsRootPathCost Integer32, apLanSTPStatsBridgeMaxMsgAge Integer32, apLanSTPStatsBridgeHelloTime Integer32, apLanSTPStatsBridgeFwDelay Integer32 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.1 apLanSTPStatsDesignatedRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Root." ::= { apLanSTPStatsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.2 apLanSTPStatsBridgeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge ID." ::= { apLanSTPStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.3 apLanSTPStatsRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Root Port." ::= { apLanSTPStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.4 apLanSTPStatsRootPathCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { apLanSTPStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.5 apLanSTPStatsBridgeMaxMsgAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge Max Message Age." ::= { apLanSTPStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.6 apLanSTPStatsBridgeHelloTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge Hello Time." ::= { apLanSTPStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.7.3.1.7 apLanSTPStatsBridgeFwDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge Forward Delay." ::= { apLanSTPStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.7.4 apLanSTPStatsPortIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanSTPStatsPortIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN Spanning Tree Port Interface Statistics." ::= { apWirelessAPStats 4 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1 apLanSTPStatsPortIntfEntry OBJECT-TYPE SYNTAX ApLanSTPStatsPortIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apLanSTPStatsPortIntfLanIndex, apLanSTPStatsPortIntfPortIndex } ::= { apLanSTPStatsPortIntfTable 1 } ApLanSTPStatsPortIntfEntry ::= SEQUENCE { apLanSTPStatsPortIntfLanIndex Integer32, apLanSTPStatsPortIntfPortIndex Integer32, apLanSTPStatsPortIntfPortName DisplayString, apLanSTPStatsPortIntfState INTEGER, apLanSTPStatsPortIntfPathCost Integer32, apLanSTPStatsPortIntfDsgRoot OCTET STRING, apLanSTPStatsPortIntfDsgBridge OCTET STRING, apLanSTPStatsPortIntfDsgPort OCTET STRING, apLanSTPStatsPortIntfDsgCost Integer32 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.1 apLanSTPStatsPortIntfLanIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "LAN index." ::= { apLanSTPStatsPortIntfEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.2 apLanSTPStatsPortIntfPortIndex OBJECT-TYPE SYNTAX Integer32 (1..33) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Index." ::= { apLanSTPStatsPortIntfEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.3 apLanSTPStatsPortIntfPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Port Name." ::= { apLanSTPStatsPortIntfEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.4 apLanSTPStatsPortIntfState OBJECT-TYPE SYNTAX INTEGER { disabled(1), listening(2), learning(3), forwarding(4), blocking(5), unknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Port." ::= { apLanSTPStatsPortIntfEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.5 apLanSTPStatsPortIntfPathCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path Cost." ::= { apLanSTPStatsPortIntfEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.6 apLanSTPStatsPortIntfDsgRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Root." ::= { apLanSTPStatsPortIntfEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.7 apLanSTPStatsPortIntfDsgBridge OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Bridge." ::= { apLanSTPStatsPortIntfEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.8 apLanSTPStatsPortIntfDsgPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Port." ::= { apLanSTPStatsPortIntfEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.7.4.1.9 apLanSTPStatsPortIntfDsgCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Cost." ::= { apLanSTPStatsPortIntfEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8 apnStats OBJECT IDENTIFIER ::= { apStats 8 } -- 1.3.6.1.4.1.388.11.3.9.8.1 apnRadioStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnRadioStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "APN radio statistics table." ::= { apnStats 1 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1 apnRadioStatsEntry OBJECT-TYPE SYNTAX ApnRadioStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "APN radio statistics entry." INDEX { apnRadioStatsIndex } ::= { apnRadioStatsTable 1 } ApnRadioStatsEntry ::= SEQUENCE { apnRadioStatsIndex INTEGER, apnRadioStatsBssid PhysAddress, apnRadioStatsApSsid DisplayString, apnRadioStatsChannel INTEGER, apnRadioStatsExtnChannel INTEGER, apnRadioStatsRssiAvgAcrossAntennas Integer32, apnRadioStatsChannelWidthMode INTEGER, apnRadioStatsOpFreq INTEGER, apnRadioStatsNumPktsRxSGI400ns Counter32, apnRadioStatsNumPktsRxSGI800ns Counter32, apnRadioStatsNumPktsTxSGI400ns Counter32, apnRadioStatsNumPktsTxSGI800ns Counter32, apnRadioStatsNumPktsRxChanWidth20MHz Counter32, apnRadioStatsNumPktsRxChanWidth40MHz Counter32, apnRadioStatsNumPktsTxChanWidth20MHz Counter32, apnRadioStatsNumPktsTxChanWidth40MHz Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.2 apnRadioStatsIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A simple integer index to the apnRadioStatsTable." ::= { apnRadioStatsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.3 apnRadioStatsBssid OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The BSSID (MAC address) of the radio." ::= { apnRadioStatsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.4 apnRadioStatsApSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The SSID of the AP." ::= { apnRadioStatsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.5 apnRadioStatsChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The channel number for the radio." ::= { apnRadioStatsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.6 apnRadioStatsExtnChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The extension channel for the radio, when in 40MHz." ::= { apnRadioStatsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.7 apnRadioStatsRssiAvgAcrossAntennas OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The average RSSI of all the antennas combined together." ::= { apnRadioStatsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.8 apnRadioStatsChannelWidthMode OBJECT-TYPE SYNTAX INTEGER { twentyMHz(1), fortyMHz(2), pco(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The channel bandwidth mode for the radio." ::= { apnRadioStatsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.9 apnRadioStatsOpFreq OBJECT-TYPE SYNTAX INTEGER { freq2400MHz(1), freq5000MHz(2), freq2400MHzAnd5000MHz(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The operational frequency for the radio." ::= { apnRadioStatsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.10 apnRadioStatsNumPktsRxSGI400ns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets received by this radio with Short Guard Interval of 400ns." ::= { apnRadioStatsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.11 apnRadioStatsNumPktsRxSGI800ns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets received by this radio with Short Guard Interval of 800ns." ::= { apnRadioStatsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.12 apnRadioStatsNumPktsTxSGI400ns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets transmitted by this radio with Short Guard Interval of 400ns." ::= { apnRadioStatsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.13 apnRadioStatsNumPktsTxSGI800ns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets transmitted by this radio with Short Guard Interval of 800ns." ::= { apnRadioStatsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.14 apnRadioStatsNumPktsRxChanWidth20MHz OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets received by this radio with channel width 20 MHz." ::= { apnRadioStatsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.15 apnRadioStatsNumPktsRxChanWidth40MHz OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets received by this radio with channel width 40 MHz." ::= { apnRadioStatsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.16 apnRadioStatsNumPktsTxChanWidth20MHz OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets transmitted by this radio with channel width 20 MHz." ::= { apnRadioStatsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.1.1.17 apnRadioStatsNumPktsTxChanWidth40MHz OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets transmitted by this radio with channel width 40 MHz." ::= { apnRadioStatsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.2 apnPortalRxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnPortalRxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For each 802.11n Portal on the AP, this table describes counts of packets received at each speed." ::= { apnStats 2 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1 apnPortalRxPktsEntry OBJECT-TYPE SYNTAX ApnPortalRxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the portal received packets table." INDEX { ccPortalIndex } ::= { apnPortalRxPktsTable 1 } ApnPortalRxPktsEntry ::= SEQUENCE { apnPortalRxPktsAt1Mb Counter32, apnPortalRxPktsAt2Mb Counter32, apnPortalRxPktsAt5pt5Mb Counter32, apnPortalRxPktsAt6Mb Counter32, apnPortalRxPktsAt9Mb Counter32, apnPortalRxPktsAt11Mb Counter32, apnPortalRxPktsAt12Mb Counter32, apnPortalRxPktsAt18Mb Counter32, apnPortalRxPktsAt24Mb Counter32, apnPortalRxPktsAt36Mb Counter32, apnPortalRxPktsAt48Mb Counter32, apnPortalRxPktsAt54Mb Counter32, apnPortalRxPktsAtMCS0 Counter32, apnPortalRxPktsAtMCS1 Counter32, apnPortalRxPktsAtMCS2 Counter32, apnPortalRxPktsAtMCS3 Counter32, apnPortalRxPktsAtMCS4 Counter32, apnPortalRxPktsAtMCS5 Counter32, apnPortalRxPktsAtMCS6 Counter32, apnPortalRxPktsAtMCS7 Counter32, apnPortalRxPktsAtMCS8 Counter32, apnPortalRxPktsAtMCS9 Counter32, apnPortalRxPktsAtMCS10 Counter32, apnPortalRxPktsAtMCS11 Counter32, apnPortalRxPktsAtMCS12 Counter32, apnPortalRxPktsAtMCS13 Counter32, apnPortalRxPktsAtMCS14 Counter32, apnPortalRxPktsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.1 apnPortalRxPktsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1 Mbps." ::= { apnPortalRxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.2 apnPortalRxPktsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 2 Mbps." ::= { apnPortalRxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.3 apnPortalRxPktsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 5.5 Mbps." ::= { apnPortalRxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.4 apnPortalRxPktsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6 Mbps." ::= { apnPortalRxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.5 apnPortalRxPktsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 9 Mbps." ::= { apnPortalRxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.6 apnPortalRxPktsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 11 Mbps." ::= { apnPortalRxPktsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.7 apnPortalRxPktsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 12 Mbps." ::= { apnPortalRxPktsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.8 apnPortalRxPktsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 18 Mbps." ::= { apnPortalRxPktsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.9 apnPortalRxPktsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 24 Mbps." ::= { apnPortalRxPktsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.10 apnPortalRxPktsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 36 Mbps." ::= { apnPortalRxPktsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.11 apnPortalRxPktsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 48 Mbps." ::= { apnPortalRxPktsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.12 apnPortalRxPktsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 54 Mbps." ::= { apnPortalRxPktsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.13 apnPortalRxPktsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 0 rate." ::= { apnPortalRxPktsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.14 apnPortalRxPktsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 1 rate." ::= { apnPortalRxPktsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.15 apnPortalRxPktsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 2 rate." ::= { apnPortalRxPktsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.16 apnPortalRxPktsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 3 rate." ::= { apnPortalRxPktsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.17 apnPortalRxPktsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 4 rate." ::= { apnPortalRxPktsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.18 apnPortalRxPktsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 5 rate." ::= { apnPortalRxPktsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.19 apnPortalRxPktsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 6 rate." ::= { apnPortalRxPktsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.20 apnPortalRxPktsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 7 rate." ::= { apnPortalRxPktsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.21 apnPortalRxPktsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 8 rate." ::= { apnPortalRxPktsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.22 apnPortalRxPktsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 9 rate." ::= { apnPortalRxPktsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.23 apnPortalRxPktsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 10 rate." ::= { apnPortalRxPktsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.24 apnPortalRxPktsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 11 rate." ::= { apnPortalRxPktsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.25 apnPortalRxPktsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 12 rate." ::= { apnPortalRxPktsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.26 apnPortalRxPktsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 13 rate." ::= { apnPortalRxPktsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.27 apnPortalRxPktsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 14 rate." ::= { apnPortalRxPktsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.2.1.28 apnPortalRxPktsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 15 rate." ::= { apnPortalRxPktsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.3 apnPortalTxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnPortalTxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For each 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed." ::= { apnStats 3 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1 apnPortalTxPktsEntry OBJECT-TYPE SYNTAX ApnPortalTxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the portal transmitted packets table." INDEX { ccPortalIndex } ::= { apnPortalTxPktsTable 1 } ApnPortalTxPktsEntry ::= SEQUENCE { apnPortalTxPktsAt1Mb Counter32, apnPortalTxPktsAt2Mb Counter32, apnPortalTxPktsAt5pt5Mb Counter32, apnPortalTxPktsAt6Mb Counter32, apnPortalTxPktsAt9Mb Counter32, apnPortalTxPktsAt11Mb Counter32, apnPortalTxPktsAt12Mb Counter32, apnPortalTxPktsAt18Mb Counter32, apnPortalTxPktsAt24Mb Counter32, apnPortalTxPktsAt36Mb Counter32, apnPortalTxPktsAt48Mb Counter32, apnPortalTxPktsAt54Mb Counter32, apnPortalTxPktsAtMCS0 Counter32, apnPortalTxPktsAtMCS1 Counter32, apnPortalTxPktsAtMCS2 Counter32, apnPortalTxPktsAtMCS3 Counter32, apnPortalTxPktsAtMCS4 Counter32, apnPortalTxPktsAtMCS5 Counter32, apnPortalTxPktsAtMCS6 Counter32, apnPortalTxPktsAtMCS7 Counter32, apnPortalTxPktsAtMCS8 Counter32, apnPortalTxPktsAtMCS9 Counter32, apnPortalTxPktsAtMCS10 Counter32, apnPortalTxPktsAtMCS11 Counter32, apnPortalTxPktsAtMCS12 Counter32, apnPortalTxPktsAtMCS13 Counter32, apnPortalTxPktsAtMCS14 Counter32, apnPortalTxPktsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.1 apnPortalTxPktsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 1 Mbps." ::= { apnPortalTxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.2 apnPortalTxPktsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 2 Mbps." ::= { apnPortalTxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.3 apnPortalTxPktsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 5.5 Mbps." ::= { apnPortalTxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.4 apnPortalTxPktsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 6 Mbps." ::= { apnPortalTxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.5 apnPortalTxPktsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 9 Mbps." ::= { apnPortalTxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.6 apnPortalTxPktsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 11 Mbps." ::= { apnPortalTxPktsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.7 apnPortalTxPktsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 12 Mbps." ::= { apnPortalTxPktsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.8 apnPortalTxPktsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 18 Mbps." ::= { apnPortalTxPktsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.9 apnPortalTxPktsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 24 Mbps." ::= { apnPortalTxPktsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.10 apnPortalTxPktsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 36 Mbps." ::= { apnPortalTxPktsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.11 apnPortalTxPktsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 48 Mbps." ::= { apnPortalTxPktsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.12 apnPortalTxPktsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 54 Mbps." ::= { apnPortalTxPktsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.13 apnPortalTxPktsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 0 rate." ::= { apnPortalTxPktsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.14 apnPortalTxPktsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 1 rate." ::= { apnPortalTxPktsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.15 apnPortalTxPktsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 2 rate." ::= { apnPortalTxPktsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.16 apnPortalTxPktsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 3 rate." ::= { apnPortalTxPktsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.17 apnPortalTxPktsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 4 rate." ::= { apnPortalTxPktsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.18 apnPortalTxPktsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 5 rate." ::= { apnPortalTxPktsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.19 apnPortalTxPktsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 6 rate." ::= { apnPortalTxPktsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.20 apnPortalTxPktsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 7 rate." ::= { apnPortalTxPktsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.21 apnPortalTxPktsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 8 rate." ::= { apnPortalTxPktsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.22 apnPortalTxPktsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 9 rate." ::= { apnPortalTxPktsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.23 apnPortalTxPktsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 10 rate." ::= { apnPortalTxPktsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.24 apnPortalTxPktsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 11 rate." ::= { apnPortalTxPktsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.25 apnPortalTxPktsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 12 rate." ::= { apnPortalTxPktsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.26 apnPortalTxPktsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 13 rate." ::= { apnPortalTxPktsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.27 apnPortalTxPktsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 14 rate." ::= { apnPortalTxPktsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.3.1.28 apnPortalTxPktsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 15 rate." ::= { apnPortalTxPktsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.4 apnPortalRxOctetsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnPortalRxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each 802.11n Portal on this AP, this table describes counts of octets received at each speed." ::= { apnStats 4 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1 apnPortalRxOctetsEntry OBJECT-TYPE SYNTAX ApnPortalRxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the portal received octets table." INDEX { ccPortalIndex } ::= { apnPortalRxOctetsTable 1 } ApnPortalRxOctetsEntry ::= SEQUENCE { apnPortalRxOctetsAt1Mb Counter32, apnPortalRxOctetsAt2Mb Counter32, apnPortalRxOctetsAt5pt5Mb Counter32, apnPortalRxOctetsAt6Mb Counter32, apnPortalRxOctetsAt9Mb Counter32, apnPortalRxOctetsAt11Mb Counter32, apnPortalRxOctetsAt12Mb Counter32, apnPortalRxOctetsAt18Mb Counter32, apnPortalRxOctetsAt24Mb Counter32, apnPortalRxOctetsAt36Mb Counter32, apnPortalRxOctetsAt48Mb Counter32, apnPortalRxOctetsAt54Mb Counter32, apnPortalRxOctetsAtMCS0 Counter32, apnPortalRxOctetsAtMCS1 Counter32, apnPortalRxOctetsAtMCS2 Counter32, apnPortalRxOctetsAtMCS3 Counter32, apnPortalRxOctetsAtMCS4 Counter32, apnPortalRxOctetsAtMCS5 Counter32, apnPortalRxOctetsAtMCS6 Counter32, apnPortalRxOctetsAtMCS7 Counter32, apnPortalRxOctetsAtMCS8 Counter32, apnPortalRxOctetsAtMCS9 Counter32, apnPortalRxOctetsAtMCS10 Counter32, apnPortalRxOctetsAtMCS11 Counter32, apnPortalRxOctetsAtMCS12 Counter32, apnPortalRxOctetsAtMCS13 Counter32, apnPortalRxOctetsAtMCS14 Counter32, apnPortalRxOctetsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.1 apnPortalRxOctetsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 1 Mbps." ::= { apnPortalRxOctetsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.2 apnPortalRxOctetsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 2 Mbps." ::= { apnPortalRxOctetsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.3 apnPortalRxOctetsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 5.5 Mbps." ::= { apnPortalRxOctetsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.4 apnPortalRxOctetsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 6 Mbps." ::= { apnPortalRxOctetsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.5 apnPortalRxOctetsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 9 Mbps." ::= { apnPortalRxOctetsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.6 apnPortalRxOctetsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 11 Mbps." ::= { apnPortalRxOctetsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.7 apnPortalRxOctetsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 12 Mbps." ::= { apnPortalRxOctetsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.8 apnPortalRxOctetsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 18 Mbps." ::= { apnPortalRxOctetsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.9 apnPortalRxOctetsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 24 Mbps." ::= { apnPortalRxOctetsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.10 apnPortalRxOctetsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 36 Mbps." ::= { apnPortalRxOctetsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.11 apnPortalRxOctetsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 48 Mbps." ::= { apnPortalRxOctetsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.12 apnPortalRxOctetsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 54 Mbps." ::= { apnPortalRxOctetsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.13 apnPortalRxOctetsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 0 rate." ::= { apnPortalRxOctetsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.14 apnPortalRxOctetsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 1 rate." ::= { apnPortalRxOctetsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.15 apnPortalRxOctetsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 2 rate." ::= { apnPortalRxOctetsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.16 apnPortalRxOctetsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 3 rate." ::= { apnPortalRxOctetsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.17 apnPortalRxOctetsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 4 rate." ::= { apnPortalRxOctetsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.18 apnPortalRxOctetsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 5 rate." ::= { apnPortalRxOctetsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.19 apnPortalRxOctetsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 6 rate." ::= { apnPortalRxOctetsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.20 apnPortalRxOctetsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 7 rate." ::= { apnPortalRxOctetsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.21 apnPortalRxOctetsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 8 rate." ::= { apnPortalRxOctetsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.22 apnPortalRxOctetsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 9 rate." ::= { apnPortalRxOctetsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.23 apnPortalRxOctetsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 10 rate." ::= { apnPortalRxOctetsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.24 apnPortalRxOctetsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 11 rate." ::= { apnPortalRxOctetsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.25 apnPortalRxOctetsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 12 rate." ::= { apnPortalRxOctetsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.26 apnPortalRxOctetsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 13 rate." ::= { apnPortalRxOctetsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.27 apnPortalRxOctetsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description.Number of octets received via this Portal at MCS 14 rate." ::= { apnPortalRxOctetsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.4.1.28 apnPortalRxOctetsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 15 rate." ::= { apnPortalRxOctetsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.5 apnPortalTxOctetsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnPortalTxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each 802.11n Portal on this AP, this table describes counts of octets transmitted at each speed." ::= { apnStats 5 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1 apnPortalTxOctetsEntry OBJECT-TYPE SYNTAX ApnPortalTxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the portal transmitted octets table." INDEX { ccPortalIndex } ::= { apnPortalTxOctetsTable 1 } ApnPortalTxOctetsEntry ::= SEQUENCE { apnPortalTxOctetsAt1Mb Counter32, apnPortalTxOctetsAt2Mb Counter32, apnPortalTxOctetsAt5pt5Mb Counter32, apnPortalTxOctetsAt6Mb Counter32, apnPortalTxOctetsAt9Mb Counter32, apnPortalTxOctetsAt11Mb Counter32, apnPortalTxOctetsAt12Mb Counter32, apnPortalTxOctetsAt18Mb Counter32, apnPortalTxOctetsAt24Mb Counter32, apnPortalTxOctetsAt36Mb Counter32, apnPortalTxOctetsAt48Mb Counter32, apnPortalTxOctetsAt54Mb Counter32, apnPortalTxOctetsAtMCS0 Counter32, apnPortalTxOctetsAtMCS1 Counter32, apnPortalTxOctetsAtMCS2 Counter32, apnPortalTxOctetsAtMCS3 Counter32, apnPortalTxOctetsAtMCS4 Counter32, apnPortalTxOctetsAtMCS5 Counter32, apnPortalTxOctetsAtMCS6 Counter32, apnPortalTxOctetsAtMCS7 Counter32, apnPortalTxOctetsAtMCS8 Counter32, apnPortalTxOctetsAtMCS9 Counter32, apnPortalTxOctetsAtMCS10 Counter32, apnPortalTxOctetsAtMCS11 Counter32, apnPortalTxOctetsAtMCS12 Counter32, apnPortalTxOctetsAtMCS13 Counter32, apnPortalTxOctetsAtMCS14 Counter32, apnPortalTxOctetsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.2 apnPortalTxOctetsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 1 Mbps." ::= { apnPortalTxOctetsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.3 apnPortalTxOctetsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 2 Mbps." ::= { apnPortalTxOctetsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.4 apnPortalTxOctetsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 5.5 Mbps." ::= { apnPortalTxOctetsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.5 apnPortalTxOctetsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 6 Mbps." ::= { apnPortalTxOctetsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.6 apnPortalTxOctetsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 9 Mbps." ::= { apnPortalTxOctetsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.7 apnPortalTxOctetsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 11 Mbps." ::= { apnPortalTxOctetsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.8 apnPortalTxOctetsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 12 Mbps." ::= { apnPortalTxOctetsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.9 apnPortalTxOctetsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 18 Mbps." ::= { apnPortalTxOctetsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.10 apnPortalTxOctetsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 24 Mbps." ::= { apnPortalTxOctetsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.11 apnPortalTxOctetsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 36 Mbps." ::= { apnPortalTxOctetsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.12 apnPortalTxOctetsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 48 Mbps." ::= { apnPortalTxOctetsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.13 apnPortalTxOctetsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at 54 Mbps." ::= { apnPortalTxOctetsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.14 apnPortalTxOctetsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 0 rate." ::= { apnPortalTxOctetsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.15 apnPortalTxOctetsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 1 rate." ::= { apnPortalTxOctetsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.16 apnPortalTxOctetsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 2 rate." ::= { apnPortalTxOctetsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.17 apnPortalTxOctetsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 3 rate." ::= { apnPortalTxOctetsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.18 apnPortalTxOctetsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 4 rate." ::= { apnPortalTxOctetsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.19 apnPortalTxOctetsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 5 rate." ::= { apnPortalTxOctetsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.20 apnPortalTxOctetsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 6 rate." ::= { apnPortalTxOctetsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.21 apnPortalTxOctetsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 7 rate." ::= { apnPortalTxOctetsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.22 apnPortalTxOctetsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 8 rate." ::= { apnPortalTxOctetsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.23 apnPortalTxOctetsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 9 rate." ::= { apnPortalTxOctetsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.24 apnPortalTxOctetsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 10 rate." ::= { apnPortalTxOctetsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.25 apnPortalTxOctetsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 11 rate." ::= { apnPortalTxOctetsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.26 apnPortalTxOctetsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 12 rate." ::= { apnPortalTxOctetsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.27 apnPortalTxOctetsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 13 rate." ::= { apnPortalTxOctetsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.28 apnPortalTxOctetsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 14 rate." ::= { apnPortalTxOctetsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.5.1.29 apnPortalTxOctetsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted via this Portal at MCS 15 rate." ::= { apnPortalTxOctetsEntry 29 } -- 1.3.6.1.4.1.388.11.3.9.8.6 apnMuRxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnMuRxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of packets received at each speed." ::= { apnStats 6 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1 apnMuRxPktsEntry OBJECT-TYPE SYNTAX ApnMuRxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " INDEX { ccMuMac } ::= { apnMuRxPktsTable 1 } ApnMuRxPktsEntry ::= SEQUENCE { apnMuRxPktsAt1Mb Counter32, apnMuRxPktsAt2Mb Counter32, apnMuRxPktsAt5pt5Mb Counter32, apnMuRxPktsAt6Mb Counter32, apnMuRxPktsAt9Mb Counter32, apnMuRxPktsAt11Mb Counter32, apnMuRxPktsAt12Mb Counter32, apnMuRxPktsAt18Mb Counter32, apnMuRxPktsAt24Mb Counter32, apnMuRxPktsAt36Mb Counter32, apnMuRxPktsAt48Mb Counter32, apnMuRxPktsAt54Mb Counter32, apnMuRxPktsAtMCS0 Counter32, apnMuRxPktsAtMCS1 Counter32, apnMuRxPktsAtMCS2 Counter32, apnMuRxPktsAtMCS3 Counter32, apnMuRxPktsAtMCS4 Counter32, apnMuRxPktsAtMCS5 Counter32, apnMuRxPktsAtMCS6 Counter32, apnMuRxPktsAtMCS7 Counter32, apnMuRxPktsAtMCS8 Counter32, apnMuRxPktsAtMCS9 Counter32, apnMuRxPktsAtMCS10 Counter32, apnMuRxPktsAtMCS11 Counter32, apnMuRxPktsAtMCS12 Counter32, apnMuRxPktsAtMCS13 Counter32, apnMuRxPktsAtMCS14 Counter32, apnMuRxPktsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.1 apnMuRxPktsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1 and 2 Mbps." ::= { apnMuRxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.2 apnMuRxPktsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnMuRxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.3 apnMuRxPktsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnMuRxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.4 apnMuRxPktsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuRxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.5 apnMuRxPktsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps." ::= { apnMuRxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.6 apnMuRxPktsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuRxPktsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.7 apnMuRxPktsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 0 to 7 rates." ::= { apnMuRxPktsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.8 apnMuRxPktsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.9 apnMuRxPktsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.10 apnMuRxPktsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.11 apnMuRxPktsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.12 apnMuRxPktsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.13 apnMuRxPktsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.14 apnMuRxPktsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.15 apnMuRxPktsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.16 apnMuRxPktsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.17 apnMuRxPktsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.18 apnMuRxPktsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.19 apnMuRxPktsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.20 apnMuRxPktsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.21 apnMuRxPktsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.22 apnMuRxPktsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.23 apnMuRxPktsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.24 apnMuRxPktsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.25 apnMuRxPktsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.26 apnMuRxPktsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.27 apnMuRxPktsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.6.1.28 apnMuRxPktsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuRxPktsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.7 apnMuTxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnMuTxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed." ::= { apnStats 7 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1 apnMuTxPktsEntry OBJECT-TYPE SYNTAX ApnMuTxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " INDEX { ccMuMac } ::= { apnMuTxPktsTable 1 } ApnMuTxPktsEntry ::= SEQUENCE { apnMuTxPktsAt1Mb Counter32, apnMuTxPktsAt2Mb Counter32, apnMuTxPktsAt5pt5Mb Counter32, apnMuTxPktsAt6Mb Counter32, apnMuTxPktsAt9Mb Counter32, apnMuTxPktsAt11Mb Counter32, apnMuTxPktsAt12Mb Counter32, apnMuTxPktsAt18Mb Counter32, apnMuTxPktsAt24Mb Counter32, apnMuTxPktsAt36Mb Counter32, apnMuTxPktsAt48Mb Counter32, apnMuTxPktsAt54Mb Counter32, apnMuTxPktsAtMCS0 Counter32, apnMuTxPktsAtMCS1 Counter32, apnMuTxPktsAtMCS2 Counter32, apnMuTxPktsAtMCS3 Counter32, apnMuTxPktsAtMCS4 Counter32, apnMuTxPktsAtMCS5 Counter32, apnMuTxPktsAtMCS6 Counter32, apnMuTxPktsAtMCS7 Counter32, apnMuTxPktsAtMCS8 Counter32, apnMuTxPktsAtMCS9 Counter32, apnMuTxPktsAtMCS10 Counter32, apnMuTxPktsAtMCS11 Counter32, apnMuTxPktsAtMCS12 Counter32, apnMuTxPktsAtMCS13 Counter32, apnMuTxPktsAtMCS14 Counter32, apnMuTxPktsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.1 apnMuTxPktsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 1 and 2 Mbps." ::= { apnMuTxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.2 apnMuTxPktsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnMuTxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.3 apnMuTxPktsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnMuTxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.4 apnMuTxPktsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuTxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.5 apnMuTxPktsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 6, 12 and 24 Mbps." ::= { apnMuTxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.6 apnMuTxPktsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuTxPktsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.7 apnMuTxPktsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts transmitted via this Portal at MCS 0 to 7 rates." ::= { apnMuTxPktsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.8 apnMuTxPktsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.9 apnMuTxPktsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.10 apnMuTxPktsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.11 apnMuTxPktsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.12 apnMuTxPktsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.13 apnMuTxPktsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.14 apnMuTxPktsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.15 apnMuTxPktsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.16 apnMuTxPktsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.17 apnMuTxPktsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.18 apnMuTxPktsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.19 apnMuTxPktsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.20 apnMuTxPktsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.21 apnMuTxPktsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.22 apnMuTxPktsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.23 apnMuTxPktsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.24 apnMuTxPktsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.25 apnMuTxPktsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.26 apnMuTxPktsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.27 apnMuTxPktsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.7.1.28 apnMuTxPktsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnMuTxPktsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.8 apnMuRxOctetsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnMuRxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of octets received at each speed." ::= { apnStats 8 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1 apnMuRxOctetsEntry OBJECT-TYPE SYNTAX ApnMuRxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ccMuMac } ::= { apnMuRxOctetsTable 1 } ApnMuRxOctetsEntry ::= SEQUENCE { apnMuRxOctetsAt1Mb Counter32, apnMuRxOctetsAt2Mb Counter32, apnMuRxOctetsAt5pt5Mb Counter32, apnMuRxOctetsAt6Mb Counter32, apnMuRxOctetsAt9Mb Counter32, apnMuRxOctetsAt11Mb Counter32, apnMuRxOctetsAt12Mb Counter32, apnMuRxOctetsAt18Mb Counter32, apnMuRxOctetsAt24Mb Counter32, apnMuRxOctetsAt36Mb Counter32, apnMuRxOctetsAt48Mb Counter32, apnMuRxOctetsAt54Mb Counter32, apnMuRxOctetsAtMCS0 Counter32, apnMuRxOctetsAtMCS1 Counter32, apnMuRxOctetsAtMCS2 Counter32, apnMuRxOctetsAtMCS3 Counter32, apnMuRxOctetsAtMCS4 Counter32, apnMuRxOctetsAtMCS5 Counter32, apnMuRxOctetsAtMCS6 Counter32, apnMuRxOctetsAtMCS7 Counter32, apnMuRxOctetsAtMCS8 Counter32, apnMuRxOctetsAtMCS9 Counter32, apnMuRxOctetsAtMCS10 Counter32, apnMuRxOctetsAtMCS11 Counter32, apnMuRxOctetsAtMCS12 Counter32, apnMuRxOctetsAtMCS13 Counter32, apnMuRxOctetsAtMCS14 Counter32, apnMuRxOctetsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.1 apnMuRxOctetsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 1 and 2 Mbps." ::= { apnMuRxOctetsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.2 apnMuRxOctetsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnMuRxOctetsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.3 apnMuRxOctetsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnMuRxOctetsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.4 apnMuRxOctetsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuRxOctetsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.5 apnMuRxOctetsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 6, 12 and 24 Mbps." ::= { apnMuRxOctetsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.6 apnMuRxOctetsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuRxOctetsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.7 apnMuRxOctetsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received via this Portal at MCS 0 to 7 rates." ::= { apnMuRxOctetsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.8 apnMuRxOctetsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.9 apnMuRxOctetsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.10 apnMuRxOctetsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.11 apnMuRxOctetsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.12 apnMuRxOctetsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.13 apnMuRxOctetsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.14 apnMuRxOctetsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.15 apnMuRxOctetsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.16 apnMuRxOctetsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.17 apnMuRxOctetsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.18 apnMuRxOctetsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.19 apnMuRxOctetsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.20 apnMuRxOctetsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.21 apnMuRxOctetsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.22 apnMuRxOctetsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.23 apnMuRxOctetsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.24 apnMuRxOctetsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.25 apnMuRxOctetsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.26 apnMuRxOctetsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.27 apnMuRxOctetsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.8.1.28 apnMuRxOctetsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuRxOctetsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.9 apnMuTxOctetsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnMuTxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of octets transmitted at each speed." ::= { apnStats 9 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1 apnMuTxOctetsEntry OBJECT-TYPE SYNTAX ApnMuTxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ccMuMac } ::= { apnMuTxOctetsTable 1 } ApnMuTxOctetsEntry ::= SEQUENCE { apnMuTxOctetsAt1Mb Counter32, apnMuTxOctetsAt2Mb Counter32, apnMuTxOctetsAt5pt5Mb Counter32, apnMuTxOctetsAt6Mb Counter32, apnMuTxOctetsAt9Mb Counter32, apnMuTxOctetsAt11Mb Counter32, apnMuTxOctetsAt12Mb Counter32, apnMuTxOctetsAt18Mb Counter32, apnMuTxOctetsAt24Mb Counter32, apnMuTxOctetsAt36Mb Counter32, apnMuTxOctetsAt48Mb Counter32, apnMuTxOctetsAt54Mb Counter32, apnMuTxOctetsAtMCS0 Counter32, apnMuTxOctetsAtMCS1 Counter32, apnMuTxOctetsAtMCS2 Counter32, apnMuTxOctetsAtMCS3 Counter32, apnMuTxOctetsAtMCS4 Counter32, apnMuTxOctetsAtMCS5 Counter32, apnMuTxOctetsAtMCS6 Counter32, apnMuTxOctetsAtMCS7 Counter32, apnMuTxOctetsAtMCS8 Counter32, apnMuTxOctetsAtMCS9 Counter32, apnMuTxOctetsAtMCS10 Counter32, apnMuTxOctetsAtMCS11 Counter32, apnMuTxOctetsAtMCS12 Counter32, apnMuTxOctetsAtMCS13 Counter32, apnMuTxOctetsAtMCS14 Counter32, apnMuTxOctetsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.2 apnMuTxOctetsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at 1 and 2 Mbps." ::= { apnMuTxOctetsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.3 apnMuTxOctetsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnMuTxOctetsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.4 apnMuTxOctetsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnMuTxOctetsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.5 apnMuTxOctetsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuTxOctetsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.6 apnMuTxOctetsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at 6, 12 and 24 Mbps." ::= { apnMuTxOctetsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.7 apnMuTxOctetsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnMuTxOctetsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.8 apnMuTxOctetsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number octets transmitted via this Portal at MCS 0 to 7 rates." ::= { apnMuTxOctetsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.9 apnMuTxOctetsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.10 apnMuTxOctetsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.11 apnMuTxOctetsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.12 apnMuTxOctetsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.13 apnMuTxOctetsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.14 apnMuTxOctetsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.15 apnMuTxOctetsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.16 apnMuTxOctetsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.17 apnMuTxOctetsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.18 apnMuTxOctetsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.19 apnMuTxOctetsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.20 apnMuTxOctetsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.21 apnMuTxOctetsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.22 apnMuTxOctetsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.23 apnMuTxOctetsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.24 apnMuTxOctetsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.25 apnMuTxOctetsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.26 apnMuTxOctetsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.27 apnMuTxOctetsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.28 apnMuTxOctetsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.9.1.29 apnMuTxOctetsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnMuTxOctetsEntry 29 } -- 1.3.6.1.4.1.388.11.3.9.8.10 apnWlanRxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnWlanRxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For each wlan on the 802.11n Portal on the AP, this table describes counts of packets received at each speed." ::= { apnStats 10 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1 apnWlanRxPktsEntry OBJECT-TYPE SYNTAX ApnWlanRxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " INDEX { ccWlanIndex } ::= { apnWlanRxPktsTable 1 } ApnWlanRxPktsEntry ::= SEQUENCE { apnWlanRxPktsAt1Mb Counter32, apnWlanRxPktsAt2Mb Counter32, apnWlanRxPktsAt5pt5Mb Counter32, apnWlanRxPktsAt6Mb Counter32, apnWlanRxPktsAt9Mb Counter32, apnWlanRxPktsAt11Mb Counter32, apnWlanRxPktsAt12Mb Counter32, apnWlanRxPktsAt18Mb Counter32, apnWlanRxPktsAt24Mb Counter32, apnWlanRxPktsAt36Mb Counter32, apnWlanRxPktsAt48Mb Counter32, apnWlanRxPktsAt54Mb Counter32, apnWlanRxPktsAtMCS0 Counter32, apnWlanRxPktsAtMCS1 Counter32, apnWlanRxPktsAtMCS2 Counter32, apnWlanRxPktsAtMCS3 Counter32, apnWlanRxPktsAtMCS4 Counter32, apnWlanRxPktsAtMCS5 Counter32, apnWlanRxPktsAtMCS6 Counter32, apnWlanRxPktsAtMCS7 Counter32, apnWlanRxPktsAtMCS8 Counter32, apnWlanRxPktsAtMCS9 Counter32, apnWlanRxPktsAtMCS10 Counter32, apnWlanRxPktsAtMCS11 Counter32, apnWlanRxPktsAtMCS12 Counter32, apnWlanRxPktsAtMCS13 Counter32, apnWlanRxPktsAtMCS14 Counter32, apnWlanRxPktsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.1 apnWlanRxPktsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1 and 2 Mbps." ::= { apnWlanRxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.2 apnWlanRxPktsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnWlanRxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.3 apnWlanRxPktsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnWlanRxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.4 apnWlanRxPktsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanRxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.5 apnWlanRxPktsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps." ::= { apnWlanRxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.6 apnWlanRxPktsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanRxPktsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.7 apnWlanRxPktsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 0 to 7 rates." ::= { apnWlanRxPktsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.8 apnWlanRxPktsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.9 apnWlanRxPktsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.10 apnWlanRxPktsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.11 apnWlanRxPktsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.12 apnWlanRxPktsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.13 apnWlanRxPktsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.14 apnWlanRxPktsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.15 apnWlanRxPktsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.16 apnWlanRxPktsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.17 apnWlanRxPktsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.18 apnWlanRxPktsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.19 apnWlanRxPktsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.20 apnWlanRxPktsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.21 apnWlanRxPktsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.22 apnWlanRxPktsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.23 apnWlanRxPktsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.24 apnWlanRxPktsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.25 apnWlanRxPktsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.26 apnWlanRxPktsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.27 apnWlanRxPktsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.10.1.28 apnWlanRxPktsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanRxPktsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.11 apnWlanTxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnWlanTxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For each wlan on the 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed." ::= { apnStats 11 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1 apnWlanTxPktsEntry OBJECT-TYPE SYNTAX ApnWlanTxPktsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " INDEX { ccWlanIndex } ::= { apnWlanTxPktsTable 1 } ApnWlanTxPktsEntry ::= SEQUENCE { apnWlanTxPktsAt1Mb Counter32, apnWlanTxPktsAt2Mb Counter32, apnWlanTxPktsAt5pt5Mb Counter32, apnWlanTxPktsAt6Mb Counter32, apnWlanTxPktsAt9Mb Counter32, apnWlanTxPktsAt11Mb Counter32, apnWlanTxPktsAt12Mb Counter32, apnWlanTxPktsAt18Mb Counter32, apnWlanTxPktsAt24Mb Counter32, apnWlanTxPktsAt36Mb Counter32, apnWlanTxPktsAt48Mb Counter32, apnWlanTxPktsAt54Mb Counter32, apnWlanTxPktsAtMCS0 Counter32, apnWlanTxPktsAtMCS1 Counter32, apnWlanTxPktsAtMCS2 Counter32, apnWlanTxPktsAtMCS3 Counter32, apnWlanTxPktsAtMCS4 Counter32, apnWlanTxPktsAtMCS5 Counter32, apnWlanTxPktsAtMCS6 Counter32, apnWlanTxPktsAtMCS7 Counter32, apnWlanTxPktsAtMCS8 Counter32, apnWlanTxPktsAtMCS9 Counter32, apnWlanTxPktsAtMCS10 Counter32, apnWlanTxPktsAtMCS11 Counter32, apnWlanTxPktsAtMCS12 Counter32, apnWlanTxPktsAtMCS13 Counter32, apnWlanTxPktsAtMCS14 Counter32, apnWlanTxPktsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.1 apnWlanTxPktsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1 and 2 Mbps." ::= { apnWlanTxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.2 apnWlanTxPktsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnWlanTxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.3 apnWlanTxPktsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnWlanTxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.4 apnWlanTxPktsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanTxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.5 apnWlanTxPktsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps." ::= { apnWlanTxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.6 apnWlanTxPktsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanTxPktsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.7 apnWlanTxPktsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of pkts received via this Portal at MCS 0 to 7 rates." ::= { apnWlanTxPktsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.8 apnWlanTxPktsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.9 apnWlanTxPktsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.10 apnWlanTxPktsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.11 apnWlanTxPktsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.12 apnWlanTxPktsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.13 apnWlanTxPktsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.14 apnWlanTxPktsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.15 apnWlanTxPktsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.16 apnWlanTxPktsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.17 apnWlanTxPktsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.18 apnWlanTxPktsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.19 apnWlanTxPktsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.20 apnWlanTxPktsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.21 apnWlanTxPktsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.22 apnWlanTxPktsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.23 apnWlanTxPktsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.24 apnWlanTxPktsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.25 apnWlanTxPktsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.26 apnWlanTxPktsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.27 apnWlanTxPktsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.11.1.28 apnWlanTxPktsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { apnWlanTxPktsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.12 apnWlanRxOctetsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnWlanRxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each wlan on the 802.11n Portal on the AP, this table describes counts of octets received at each speed." ::= { apnStats 12 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1 apnWlanRxOctetsEntry OBJECT-TYPE SYNTAX ApnWlanRxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ccWlanIndex } ::= { apnWlanRxOctetsTable 1 } ApnWlanRxOctetsEntry ::= SEQUENCE { apnWlanRxOctetsAt1Mb Counter32, apnWlanRxOctetsAt2Mb Counter32, apnWlanRxOctetsAt5pt5Mb Counter32, apnWlanRxOctetsAt6Mb Counter32, apnWlanRxOctetsAt9Mb Counter32, apnWlanRxOctetsAt11Mb Counter32, apnWlanRxOctetsAt12Mb Counter32, apnWlanRxOctetsAt18Mb Counter32, apnWlanRxOctetsAt24Mb Counter32, apnWlanRxOctetsAt36Mb Counter32, apnWlanRxOctetsAt48Mb Counter32, apnWlanRxOctetsAt54Mb Counter32, apnWlanRxOctetsAtMCS0 Counter32, apnWlanRxOctetsAtMCS1 Counter32, apnWlanRxOctetsAtMCS2 Counter32, apnWlanRxOctetsAtMCS3 Counter32, apnWlanRxOctetsAtMCS4 Counter32, apnWlanRxOctetsAtMCS5 Counter32, apnWlanRxOctetsAtMCS6 Counter32, apnWlanRxOctetsAtMCS7 Counter32, apnWlanRxOctetsAtMCS8 Counter32, apnWlanRxOctetsAtMCS9 Counter32, apnWlanRxOctetsAtMCS10 Counter32, apnWlanRxOctetsAtMCS11 Counter32, apnWlanRxOctetsAtMCS12 Counter32, apnWlanRxOctetsAtMCS13 Counter32, apnWlanRxOctetsAtMCS14 Counter32, apnWlanRxOctetsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.1 apnWlanRxOctetsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1 and 2 Mbps." ::= { apnWlanRxOctetsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.2 apnWlanRxOctetsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnWlanRxOctetsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.3 apnWlanRxOctetsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnWlanRxOctetsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.4 apnWlanRxOctetsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanRxOctetsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.5 apnWlanRxOctetsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps." ::= { apnWlanRxOctetsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.6 apnWlanRxOctetsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanRxOctetsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.7 apnWlanRxOctetsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at MCS 0 to 7 rates." ::= { apnWlanRxOctetsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.8 apnWlanRxOctetsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.9 apnWlanRxOctetsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.10 apnWlanRxOctetsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.11 apnWlanRxOctetsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.12 apnWlanRxOctetsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.13 apnWlanRxOctetsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.14 apnWlanRxOctetsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.15 apnWlanRxOctetsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.16 apnWlanRxOctetsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.17 apnWlanRxOctetsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.18 apnWlanRxOctetsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.19 apnWlanRxOctetsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.20 apnWlanRxOctetsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.21 apnWlanRxOctetsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.22 apnWlanRxOctetsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.23 apnWlanRxOctetsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.24 apnWlanRxOctetsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.25 apnWlanRxOctetsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.26 apnWlanRxOctetsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.27 apnWlanRxOctetsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.12.1.28 apnWlanRxOctetsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanRxOctetsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.8.13 apnWlanTxOctetsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApnWlanTxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each wlan on the 802.11n Portal on the AP, this table describes counts of octets transmitted at each speed." ::= { apnStats 13 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1 apnWlanTxOctetsEntry OBJECT-TYPE SYNTAX ApnWlanTxOctetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ccWlanIndex } ::= { apnWlanTxOctetsTable 1 } ApnWlanTxOctetsEntry ::= SEQUENCE { apnWlanTxOctetsAt1Mb Counter32, apnWlanTxOctetsAt2Mb Counter32, apnWlanTxOctetsAt5pt5Mb Counter32, apnWlanTxOctetsAt6Mb Counter32, apnWlanTxOctetsAt9Mb Counter32, apnWlanTxOctetsAt11Mb Counter32, apnWlanTxOctetsAt12Mb Counter32, apnWlanTxOctetsAt18Mb Counter32, apnWlanTxOctetsAt24Mb Counter32, apnWlanTxOctetsAt36Mb Counter32, apnWlanTxOctetsAt48Mb Counter32, apnWlanTxOctetsAt54Mb Counter32, apnWlanTxOctetsAtMCS0 Counter32, apnWlanTxOctetsAtMCS1 Counter32, apnWlanTxOctetsAtMCS2 Counter32, apnWlanTxOctetsAtMCS3 Counter32, apnWlanTxOctetsAtMCS4 Counter32, apnWlanTxOctetsAtMCS5 Counter32, apnWlanTxOctetsAtMCS6 Counter32, apnWlanTxOctetsAtMCS7 Counter32, apnWlanTxOctetsAtMCS8 Counter32, apnWlanTxOctetsAtMCS9 Counter32, apnWlanTxOctetsAtMCS10 Counter32, apnWlanTxOctetsAtMCS11 Counter32, apnWlanTxOctetsAtMCS12 Counter32, apnWlanTxOctetsAtMCS13 Counter32, apnWlanTxOctetsAtMCS14 Counter32, apnWlanTxOctetsAtMCS15 Counter32 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.1 apnWlanTxOctetsAt1Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1 and 2 Mbps." ::= { apnWlanTxOctetsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.2 apnWlanTxOctetsAt2Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps." ::= { apnWlanTxOctetsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.3 apnWlanTxOctetsAt5pt5Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps." ::= { apnWlanTxOctetsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.4 apnWlanTxOctetsAt6Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanTxOctetsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.5 apnWlanTxOctetsAt9Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps." ::= { apnWlanTxOctetsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.6 apnWlanTxOctetsAt11Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates." ::= { apnWlanTxOctetsEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.7 apnWlanTxOctetsAt12Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pkts received via this Portal at MCS 0 to 7 rates." ::= { apnWlanTxOctetsEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.8 apnWlanTxOctetsAt18Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 8 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.9 apnWlanTxOctetsAt24Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 9 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.10 apnWlanTxOctetsAt36Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 10 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.11 apnWlanTxOctetsAt48Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 11 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.12 apnWlanTxOctetsAt54Mb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 12 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.13 apnWlanTxOctetsAtMCS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 13 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.14 apnWlanTxOctetsAtMCS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 14 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.15 apnWlanTxOctetsAtMCS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 15 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.16 apnWlanTxOctetsAtMCS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 16 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.17 apnWlanTxOctetsAtMCS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 17 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.18 apnWlanTxOctetsAtMCS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 18 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.19 apnWlanTxOctetsAtMCS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 19 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.20 apnWlanTxOctetsAtMCS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 20 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.21 apnWlanTxOctetsAtMCS8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 21 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.22 apnWlanTxOctetsAtMCS9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 22 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.23 apnWlanTxOctetsAtMCS10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 23 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.24 apnWlanTxOctetsAtMCS11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 24 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.25 apnWlanTxOctetsAtMCS12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 25 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.26 apnWlanTxOctetsAtMCS13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 26 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.27 apnWlanTxOctetsAtMCS14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 27 } -- 1.3.6.1.4.1.388.11.3.9.8.13.1.28 apnWlanTxOctetsAtMCS15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apnWlanTxOctetsEntry 28 } -- 1.3.6.1.4.1.388.11.3.9.9 apDiagStats OBJECT IDENTIFIER ::= { apStats 9 } -- 1.3.6.1.4.1.388.11.3.9.9.1 apDiagCpuStats OBJECT IDENTIFIER ::= { apDiagStats 1 } -- 1.3.6.1.4.1.388.11.3.9.9.1.1 apDiagCpuLoad1Min OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "% of CPU load averaged over 1 min." ::= { apDiagCpuStats 1 } -- 1.3.6.1.4.1.388.11.3.9.9.1.2 apDiagCpuLoad5Min OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "% of CPU load averaged over 5 mins." ::= { apDiagCpuStats 2 } -- 1.3.6.1.4.1.388.11.3.9.9.1.3 apDiagCpuLoad15Min OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "% of CPU load averaged over 15 mins." ::= { apDiagCpuStats 3 } -- 1.3.6.1.4.1.388.11.3.9.9.2 apDiagRamStats OBJECT IDENTIFIER ::= { apDiagStats 2 } -- 1.3.6.1.4.1.388.11.3.9.9.2.1 apDiagRamTotal OBJECT-TYPE SYNTAX Unsigned32 UNITS "megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total RAM available in the system " ::= { apDiagRamStats 1 } -- 1.3.6.1.4.1.388.11.3.9.9.2.2 apDiagRamUsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total RAM used in the system " ::= { apDiagRamStats 2 } -- 1.3.6.1.4.1.388.11.3.9.9.2.3 apDiagRamPercentageUsed OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "0.1%" MAX-ACCESS read-only STATUS current DESCRIPTION "% of total RAM used. Precision is to the degree of 0.1 % " ::= { apDiagRamStats 3 } -- 1.3.6.1.4.1.388.11.3.9.10 apLanStats OBJECT IDENTIFIER ::= { apStats 10 } -- 1.3.6.1.4.1.388.11.3.9.10.1 apLanInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apLanStats 1 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1 apLanInfoEntry OBJECT-TYPE SYNTAX ApLanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apLanInfoIndex } ::= { apLanInfoTable 1 } ApLanInfoEntry ::= SEQUENCE { apLanInfoIndex Integer32, apLanInfoEnabled TruthValue, apLanInfoIpAddress IpAddress, apLanInfoNetworkMask IpAddress, apLanInfoEthernetAddress PhysAddress, apLanInfoSpeed Unsigned32, apLanInfoDuplexMode INTEGER } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.1 apLanInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { apLanInfoEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.2 apLanInfoEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Is LAN enabled." ::= { apLanInfoEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.3 apLanInfoIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN ip address" ::= { apLanInfoEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.4 apLanInfoNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN network mask." ::= { apLanInfoEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.5 apLanInfoEthernetAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { apLanInfoEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.6 apLanInfoSpeed OBJECT-TYPE SYNTAX Unsigned32 UNITS "mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Lan Ethernet Port Speed." ::= { apLanInfoEntry 6 } -- 1.3.6.1.4.1.388.11.3.9.10.1.1.7 apLanInfoDuplexMode OBJECT-TYPE SYNTAX INTEGER { half(0), full(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Lan ethernet port duplex mode." ::= { apLanInfoEntry 7 } -- 1.3.6.1.4.1.388.11.3.9.10.2 apLanRxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanRxPktsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apLanStats 2 } -- 1.3.6.1.4.1.388.11.3.9.10.2.1 apLanRxPktsEntry OBJECT-TYPE SYNTAX ApLanRxPktsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apLanInfoIndex } ::= { apLanRxPktsTable 1 } ApLanRxPktsEntry ::= SEQUENCE { apLanRxPkts Counter32, apLanRxBytes Counter32, apLanRxErrors Counter32, apLanRxDropped Counter32, apLanRxFrameErrors Counter32 } -- 1.3.6.1.4.1.388.11.3.9.10.2.1.1 apLanRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of packets received." ::= { apLanRxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.10.2.1.2 apLanRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of bytes received." ::= { apLanRxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.10.2.1.3 apLanRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of errors received." ::= { apLanRxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.10.2.1.4 apLanRxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received packets dropped." ::= { apLanRxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.10.2.1.5 apLanRxFrameErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received frame errors." ::= { apLanRxPktsEntry 5 } -- 1.3.6.1.4.1.388.11.3.9.10.4 apLanTxPktsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanTxPktsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apLanStats 4 } -- 1.3.6.1.4.1.388.11.3.9.10.4.1 apLanTxPktsEntry OBJECT-TYPE SYNTAX ApLanTxPktsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apLanInfoIndex } ::= { apLanTxPktsTable 1 } ApLanTxPktsEntry ::= SEQUENCE { apLanTxPkts Counter32, apLanTxBytes Counter32, apLanTxErrors Counter32, apLanTxDropped Counter32, apLanTxFrameErrors Counter32 } -- 1.3.6.1.4.1.388.11.3.9.10.4.1.1 apLanTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of packets transmitted." ::= { apLanTxPktsEntry 1 } -- 1.3.6.1.4.1.388.11.3.9.10.4.1.2 apLanTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of bytes transmitted." ::= { apLanTxPktsEntry 2 } -- 1.3.6.1.4.1.388.11.3.9.10.4.1.3 apLanTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of errors transmitted." ::= { apLanTxPktsEntry 3 } -- 1.3.6.1.4.1.388.11.3.9.10.4.1.4 apLanTxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted packets dropped." ::= { apLanTxPktsEntry 4 } -- 1.3.6.1.4.1.388.11.3.9.10.4.1.5 apLanTxFrameErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted carrier errors." ::= { apLanTxPktsEntry 5 } -- MIB values to control network management access to the -- switch. -- 1.3.6.1.4.1.388.11.3.10 apMgmtAccess OBJECT IDENTIFIER ::= { abgAP 10 } -- 1.3.6.1.4.1.388.11.3.10.1 apMgmtAccessToAllow OBJECT-TYPE SYNTAX BITS { fromLan1AppletHttp(0), fromLan1AppletHttps(1), fromLan1CliTelnet(2), fromLan1Ssh(3), fromLan1Snmp(4), fromLan2AppletHttp(5), fromLan2AppletHttps(6), fromLan2CliTelnet(7), fromLan2Ssh(8), fromLan2Snmp(9), fromWanAppletHttp(10), fromWanAppletHttps(11), fromWanCliTelnet(12), fromWanSsh(13), fromWanSnmp(14) } MAX-ACCESS read-write STATUS current DESCRIPTION "Types of network management access to permit." ::= { apMgmtAccess 1 } -- 1.3.6.1.4.1.388.11.3.10.2 apTrustedHost OBJECT IDENTIFIER ::= { apMgmtAccess 2 } -- 1.3.6.1.4.1.388.11.3.10.2.1 apTrustedHostEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable trusted host feature." ::= { apTrustedHost 1 } -- 1.3.6.1.4.1.388.11.3.10.2.2 apTrustedHostRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF ApTrustedHostRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of trusted host ip ranges." ::= { apTrustedHost 2 } -- 1.3.6.1.4.1.388.11.3.10.2.2.1 apTrustedHostRangeEntry OBJECT-TYPE SYNTAX ApTrustedHostRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trusted host ip range table entry." INDEX { apTrustedHostRangeIndex } ::= { apTrustedHostRangeTable 1 } ApTrustedHostRangeEntry ::= SEQUENCE { apTrustedHostRangeIndex Integer32, apTrustedHostRangeLowerIp IpAddress, apTrustedHostRangeUpperIp IpAddress } -- 1.3.6.1.4.1.388.11.3.10.2.2.1.1 apTrustedHostRangeIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Trusted host ip range index." ::= { apTrustedHostRangeEntry 1 } -- 1.3.6.1.4.1.388.11.3.10.2.2.1.2 apTrustedHostRangeLowerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Lower bound of ip address range." ::= { apTrustedHostRangeEntry 2 } -- 1.3.6.1.4.1.388.11.3.10.2.2.1.3 apTrustedHostRangeUpperIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Upper bound of ip address range." ::= { apTrustedHostRangeEntry 3 } -- 1.3.6.1.4.1.388.11.3.10.3 apMgmtAccessDisableSslV2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'true' disables HTTP access to the AP using SSLv2, and therefore allows only SSLv3. Setting it to 'false' allows HTTP access to the AP using SSLv3 as well as SSLv2." ::= { apMgmtAccess 3 } -- 1.3.6.1.4.1.388.11.3.11 apRouter OBJECT IDENTIFIER ::= { abgAP 11 } -- 1.3.6.1.4.1.388.11.3.11.1 apRouterDefaultGatewayInterface OBJECT-TYPE SYNTAX INTEGER { lan1(1), lan2(2), wan(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Interface whose Default Gateway is used when both LAN and WAN are DHCP clients." ::= { apRouter 1 } -- 1.3.6.1.4.1.388.11.3.12 apManualTime OBJECT IDENTIFIER ::= { abgAP 12 } -- 1.3.6.1.4.1.388.11.3.12.1 apManualCurrSystemDateTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current System Time of the AP." ::= { apManualTime 1 } -- 1.3.6.1.4.1.388.11.3.12.2 apManualTimeZoneSetting OBJECT IDENTIFIER ::= { apManualTime 2 } -- 1.3.6.1.4.1.388.11.3.12.2.1 apManualTimeZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF ApManualTimeZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all the Time Zones." ::= { apManualTimeZoneSetting 1 } -- 1.3.6.1.4.1.388.11.3.12.2.1.1 apManualTimeZoneEntry OBJECT-TYPE SYNTAX ApManualTimeZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apManualTimeZoneIndex } ::= { apManualTimeZoneTable 1 } ApManualTimeZoneEntry ::= SEQUENCE { apManualTimeZoneIndex Integer32, apManualTimeZoneName DisplayString } -- 1.3.6.1.4.1.388.11.3.12.2.1.1.1 apManualTimeZoneIndex OBJECT-TYPE SYNTAX Integer32 (1..550) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple Index." ::= { apManualTimeZoneEntry 1 } -- 1.3.6.1.4.1.388.11.3.12.2.1.1.2 apManualTimeZoneName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Time Zone Name." ::= { apManualTimeZoneEntry 2 } -- 1.3.6.1.4.1.388.11.3.12.2.2 apManualExpectedTimeZone OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Expected Time Zone to be set. This is a pointer to an entry in the apManualTimeZoneTable." ::= { apManualTimeZoneSetting 2 } -- 1.3.6.1.4.1.388.11.3.12.2.3 apManualTimeZoneSet OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Set the expected time zone for the system." ::= { apManualTimeZoneSetting 3 } -- 1.3.6.1.4.1.388.11.3.12.3 apManualDateTimeSetting OBJECT IDENTIFIER ::= { apManualTime 3 } -- 1.3.6.1.4.1.388.11.3.12.3.1 apManualExpectedYear OBJECT-TYPE SYNTAX Integer32 (1970..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected year to be SET." ::= { apManualDateTimeSetting 1 } -- 1.3.6.1.4.1.388.11.3.12.3.2 apManualExpectedMonth OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected month to be SET." ::= { apManualDateTimeSetting 2 } -- 1.3.6.1.4.1.388.11.3.12.3.3 apManualExpectedDay OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected day to be SET." ::= { apManualDateTimeSetting 3 } -- 1.3.6.1.4.1.388.11.3.12.3.4 apManualExpectedHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected hour to be SET." ::= { apManualDateTimeSetting 4 } -- 1.3.6.1.4.1.388.11.3.12.3.5 apManualExpectedMinutes OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected minutes to be SET." ::= { apManualDateTimeSetting 5 } -- 1.3.6.1.4.1.388.11.3.12.3.6 apManualExpectedSeconds OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "Expected seconds to be SET." ::= { apManualDateTimeSetting 6 } -- 1.3.6.1.4.1.388.11.3.12.3.7 apManualDateTimeSet OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Set the expected values in System Date and Time." ::= { apManualDateTimeSetting 7 } -- 1.3.6.1.4.1.388.11.3.13 apAdmin OBJECT IDENTIFIER ::= { abgAP 13 } -- 1.3.6.1.4.1.388.11.3.13.1 apLoginMessage OBJECT IDENTIFIER ::= { apAdmin 1 } -- 1.3.6.1.4.1.388.11.3.13.1.1 apLoginMessageMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Login Message Mode: Enabled/Disabled" ::= { apLoginMessage 1 } -- 1.3.6.1.4.1.388.11.3.13.1.2 apLoginMessageText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Login Message Text which gets displayed at the time of login, if Login Message mode is enabled. 1-511 characters are allowed for Login Text Message. Note: Carriage Return (\0A) is not supported by SNMP." ::= { apLoginMessage 2 } -- 1.3.6.1.4.1.388.11.3.13.2 apLEDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the state of all the LEDs" ::= { apAdmin 2 } -- 1.3.6.1.4.1.388.11.3.14 apRadiusServer OBJECT IDENTIFIER ::= { abgAP 14 } -- 1.3.6.1.4.1.388.11.3.14.1 apRadiusUsers OBJECT IDENTIFIER ::= { apRadiusServer 1 } -- 1.3.6.1.4.1.388.11.3.14.1.1 apRadiusUsersGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadiusUsersGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apRadiusUsers 1 } -- 1.3.6.1.4.1.388.11.3.14.1.1.1 apRadiusUsersGroupEntry OBJECT-TYPE SYNTAX ApRadiusUsersGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apRadiusUsersGroup } ::= { apRadiusUsersGroupTable 1 } ApRadiusUsersGroupEntry ::= SEQUENCE { apRadiusUsersGroup DisplayString, apRadiusUsersGroupRowStatus AbbrevRowStatus, apRadiusUsersGroupId Integer32 } -- 1.3.6.1.4.1.388.11.3.14.1.1.1.1 apRadiusUsersGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apRadiusUsersGroupEntry 1 } -- 1.3.6.1.4.1.388.11.3.14.1.1.1.2 apRadiusUsersGroupRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apRadiusUsersGroupEntry 2 } -- 1.3.6.1.4.1.388.11.3.14.1.1.1.3 apRadiusUsersGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apRadiusUsersGroupEntry 3 } -- 1.3.6.1.4.1.388.11.3.14.2 apRadiusAccess OBJECT IDENTIFIER ::= { apRadiusServer 2 } -- 1.3.6.1.4.1.388.11.3.14.2.1 apRadiusAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRadiusAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { apRadiusAccess 1 } -- 1.3.6.1.4.1.388.11.3.14.2.1.1 apRadiusAccessEntry OBJECT-TYPE SYNTAX ApRadiusAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { apRadiusUsersGroup } ::= { apRadiusAccessTable 1 } ApRadiusAccessEntry ::= SEQUENCE { apRadiusAccessWlanPtrs BITS, apRadiusAccessTimeRule DisplayString } -- 1.3.6.1.4.1.388.11.3.14.2.1.1.2 apRadiusAccessWlanPtrs OBJECT-TYPE SYNTAX BITS { null(0), wlan1(1), wlan2(2), wlan3(3), wlan4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apRadiusAccessEntry 2 } -- 1.3.6.1.4.1.388.11.3.14.2.1.1.3 apRadiusAccessTimeRule OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { apRadiusAccessEntry 3 } -- 1.3.6.1.4.1.388.11.3.15 apWips OBJECT IDENTIFIER ::= { abgAP 15 } -- 1.3.6.1.4.1.388.11.3.15.1 apWipsPrimaryServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the primary WIPS server. If the IP address is unknown, the value is 0.0.0.0." ::= { apWips 1 } -- 1.3.6.1.4.1.388.11.3.15.2 apWipsSecondaryServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the secondary WIPS server. If the IP address is unknown, the value is 0.0.0.0." ::= { apWips 2 } -- 1.3.6.1.4.1.388.11.3.16 apPower OBJECT IDENTIFIER ::= { abgAP 16 } -- 1.3.6.1.4.1.388.11.3.16.1 apPowerMode OBJECT-TYPE SYNTAX INTEGER { modeAuto(1), mode3af(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the power mode to auto(1) or 3af(2). NOTE WELL: Changing the power mode will restart the AP." ::= { apPower 1 } -- 1.3.6.1.4.1.388.11.3.16.2 apPowerDefRadio OBJECT-TYPE SYNTAX INTEGER { radio1(1), radio2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the default radio to radio1(1) or radio2(2). NOTE WELL: Changing the default radio will restart the AP." ::= { apPower 2 } -- 1.3.6.1.4.1.388.11.3.16.3 apPowerStatus OBJECT-TYPE SYNTAX INTEGER { power3af(1), mid(2), fullAvailable(3), power3at(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current power status for 2-radio AP7131 - 3af(1), mid(2) or full available (3). For AP7131 mid power is 17Watts. Power status for 3-radio SKU in AP7131N - 3af(1), 3at(4) or full available (3). For AP7131N 'mid' power is termed '3at' and is 25.5 Watts." ::= { apPower 3 } -- 1.3.6.1.4.1.388.11.3.16.4 apPowerOption3af OBJECT-TYPE SYNTAX INTEGER { default(1), option(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set power-option for 3af to default or option. NOTE WELL: Changing the power-option for 3af will restart the AP." ::= { apPower 4 } -- 1.3.6.1.4.1.388.11.3.16.5 apPowerOption3at OBJECT-TYPE SYNTAX INTEGER { default(1), option(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set power-option for 3at to default or option. NOTE WELL: Changing the power-option for 3at will restart the AP." ::= { apPower 5 } -- !!- OID: located at .1000 to save room above. -- 1.3.6.1.4.1.388.11.3.1000 apGroups OBJECT IDENTIFIER ::= { abgAP 1000 } -- 1.3.6.1.4.1.388.11.3.1000.1 apGroupsV1dot0 OBJECT IDENTIFIER ::= { apGroups 1 } -- 1.3.6.1.4.1.388.11.3.1000.1.1 dot1xGroup OBJECT-GROUP OBJECTS { dot1xPaePortNumber, dot1xPaeState, dot1xAuthBackendAuthState, dot1xAuthAdminControlledDirections, dot1xAuthOperControlledDirections, dot1xAuthAuthControlledPortStatus, dot1xAuthAuthControlledPortControl, dot1xAuthQuietPeriod, dot1xAuthTxPeriod, dot1xAuthSuppTimeout, dot1xAuthServerTimeout, dot1xAuthMaxReq, dot1xAuthReAuthPeriod, dot1xAuthReAuthEnabled, dot1xAuthKeyTxEnabled, dot1xAuthEapolFramesRx, dot1xAuthEapolFramesTx, dot1xAuthEapolStartFramesRx, dot1xAuthEapolLogoffFramesRx, dot1xAuthEapolRespIdFramesRx, dot1xAuthEapolRespFramesRx, dot1xAuthEapolReqIdFramesTx, dot1xAuthEapolReqFramesTx, dot1xAuthInvalidEapolFramesRx, dot1xAuthEapLengthErrorFramesRx, dot1xAuthLastEapolFrameVersion, dot1xAuthLastEapolFrameSource, dot1xAuthEntersConnecting, dot1xAuthEapLogoffsWhileConnecting, dot1xAuthEntersAuthenticating, dot1xAuthAuthSuccessWhileAuthenticating, dot1xAuthAuthTimeoutsWhileAuthenticating, dot1xAuthAuthFailWhileAuthenticating, dot1xAuthAuthReauthsWhileAuthenticating, dot1xAuthAuthEapStartsWhileAuthenticating, dot1xAuthAuthEapLogoffWhileAuthenticating, dot1xAuthAuthReauthsWhileAuthenticated, dot1xAuthAuthEapStartsWhileAuthenticated, dot1xAuthAuthEapLogoffWhileAuthenticated, dot1xAuthBackendResponses, dot1xAuthBackendAccessChallenges, dot1xAuthBackendOtherRequestsToSupplicant, dot1xAuthBackendNonNakResponsesFromSupplicant, dot1xAuthBackendAuthSuccesses, dot1xAuthBackendAuthFails, dot1xAuthSessionOctetsRx, dot1xAuthSessionOctetsTx, dot1xAuthSessionFramesRx, dot1xAuthSessionFramesTx, dot1xAuthSessionId, dot1xAuthSessionAuthenticMethod, dot1xAuthSessionTime, dot1xAuthSessionTerminateCause, dot1xAuthSessionUserName } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 1 } -- 1.3.6.1.4.1.388.11.3.1000.1.2 apRfGroup OBJECT-GROUP OBJECTS { apRadioSettingsIndex, apRadioSettingsName, apRadioSettingsMacAddress, apRadioSettingsAntenna, apRadioSettingsShortPreamble, apRadioSettingsRtsThresh, apRadioSettingsBeaconInt, apRadioSettingsEnable, apRadioSettingsBand, apRadioSettingsPointersToWlans, apRadioCfgDesPlacement, apRadioCfgPosChannel, apRadioCfgDesChannel, apRadioCfgPosPowerLevel, apRadioCfgDesPowerLevel, apRadioCfgPowerInMW, apRadioCfgSet, apRadioCfgReset, apRadioCfgPlacement, apRadioCfgChannel, apRadioCfgPowerLevel, apRadioBssIndex, apRadioBssPrimaryWlan, apWlanMuAclPointerToAclPolicy, apRadioSettingsBasicRates, apRadioSettingsSupportedRates, apRadioSettingsBackgroundCwMin, apRadioSettingsBackgroundCwMax, apRadioSettingsBackgroundAifsn, apRadioSettingsBackgroundTxopsTime, apRadioSettingsBestEffortCwMin, apRadioSettingsBestEffortCwMax, apRadioSettingsBestEffortAifsn, apRadioSettingsBestEffortTxopsTime, apRadioSettingsVideoCwMin, apRadioSettingsVideoCwMax, apRadioSettingsVideoAifsn, apRadioSettingsVideoTxopsTime, apRadioSettingsVoiceCwMin, apRadioSettingsVoiceCwMax, apRadioSettingsVoiceAifsn, apRadioSettingsVoiceTxopsTime, apWlanIndex, apWlanName, apWlanEssid, apWlanEnable, apWlanUseRadio, apWlanMaxMus, apWlanAclPolicy, apWlanSecurityPolicy, apWlanQosPolicy, apWlanAuthKerberosPassword, apWlanDisallowMuToMu, apWlanUseSecureBeacon, apWlanAnswerBroadcastEss, apWlanSecPolicyIndex, apWlanSecPolicyName, apWlanSecPolicyAuthentication, apWlanSecPolicyEncryption, apWlanAuthEapReauthenticationEnable, apWlanAuthEapReauthenticationPeriod, apWlanAuthEapReauthenticationMaxRetries, apWlanAuthEapRadius1Server, apWlanAuthEapRadius1Port, apWlanAuthEapRadius1SharedSecret, apWlanAuthEapRadius2Server, apWlanAuthEapRadius2Port, apWlanAuthEapRadius2SharedSecret, apWlanAuthEapMuQuietPeriod, apWlanAuthEapMuTimeout, apWlanAuthEapMuTxPeriod, apWlanAuthEapMuMaxRetries, apWlanAuthEapServerTimeout, apWlanAuthEapServerMaxRetries, apWlanAuthKerberosRealmName, apWlanAuthKerberosKdcServerIp1, apWlanAuthKerberosKdcPort1, apWlanAuthKerberosKdcServerIp2, apWlanAuthKerberosKdcPort2, apWlanAuthKerberosKdcServerIpR, apWlanAuthKerberosKdcPortR, apWlanCryptoWepPassKey, apWlanCryptoWepKey1, apWlanCryptoWepKey2, apWlanCryptoWepKey3, apWlanCryptoWepKey4, apWlanCryptoWepKeyToUse, apWlanCryptoTkipBcastKeyRotation, apWlanCryptoTkipKeyRotationInterval, apWlanCryptoTkipKeyToUse, apWlanCryptoTkipPassphrase, apWlanCryptoTkipKey, apWlanCryptoCcmpBcastKeyRotation, apWlanCryptoCcmpKeyRotationInterval, apWlanCryptoCcmpKeyToUse, apWlanCryptoCcmpPassphrase, apWlanCryptoCcmpKey, apWlanCryptoKeyguardKey1, apWlanCryptoKeyguardKey2, apWlanCryptoKeyguardKey3, apWlanCryptoKeyguardKey4, apWlanCryptoKeyguardKeyToUse, apWlanMuAclPolicyIndex, apWlanMuAclPolicyName, apWlanMuAclPolicyAccessMode, apWlanMuAclIndex, apWlanMuAclStartingMac, apWlanMuAclEndingMac, apWlanMuAclRowStatus, apWlanQosPolicyIndex, apWlanQosPolicyName, apWlanEnableWMM, apWlanQosPolicyBackgroundCwMin, apWlanQosPolicyBackgroundCwMax, apWlanQosPolicyBackgroundAifsn, apWlanQosPolicyBackgroundTxopsTime, apWlanQosPolicyBestEffortCwMin, apWlanQosPolicyBestEffortCwMax, apWlanQosPolicyBestEffortAifsn, apWlanQosPolicyBestEffortTxopsTime, apWlanQosPolicyVideoCwMin, apWlanQosPolicyVideoCwMax, apWlanQosPolicyVideoAifsn, apWlanQosPolicyVideoTxopsTime, apWlanQosPolicyVoiceCwMin, apWlanQosPolicyVoiceCwMax, apWlanQosPolicyVoiceAifsn, apWlanQosPolicyVoiceTxopsTime, apWlanVoicePrioritization, apWlanMulticastAddr1, apWlanVlanId, apWlanSecPolicyRowStatus, apWlanMulticastAddr2, apWlanAuthEapRadiusAcctMode, apWlanAuthEapRadiusAcctMuTimeout, apWlanAuthEapRadiusAcctMuRetries, apWlanAuthEapSyslogMode, apWlanAuthEapSyslogServerIp, apWlanSecPolicyPointerToWlan, apWlanMuAclPolicyPointerToWlan, apWlanMuAclPolicyRowStatus, apWlanQosPolicyPointerToWlan, apWlanQosPolicyBackgroundTxopsTimeInMS, apWlanQosPolicyBestEffortTxopsTimeInMS, apWlanQosPolicyVideoTxopsTimeInMS, apWlanQosPolicyVoiceTxopsTimeInMS, apRadioSettingsBGMode, apRadioSettingsBackgroundTxopsTimeInMS, apRadioSettingsVideoTxopsTimeInMS, apRadioCfgDesPowerInMW, apWlanQosPolicyRowStatus, apRadioE2BMapStatus, apRadioE2BMapStatusMessage, apWlanCryptoCcmpFastRoamPreAuth, apWlanCryptoCcmpMixedMode, apRadioCfgChannelMode, apWlanAuthKerberosUsername, apRadioWlanBssid, apRadioSettingsE2BMapMessage, apIpFilterPolicyIndex, apIpFilterPolicyName, apIpFilterPolicyProtocol, apIpFilterPolicySrcStartIp, apIpFilterPolicySrcEndIp, apIpFilterPolicyDestStartIp, apIpFilterPolicyDestEndIp, apIpFilterPolicyUseStatus, apIpFilterPolicyRowStatus, apIpFilterWlanMode, apIpFilterWlanDefInAction, apIpFilterWlanDefOutAction, apIpFilterWlanPolicyIndex, apIpFilterWlanPolicyPolicy, apIpFilterWlanPolicyDirection, apIpFilterWlanPolicyAction, apIpFilterWlanPolicyRowStatus, apIpFilterLanMode, apIpFilterLanDefInAction, apIpFilterLanDefOutAction, apIpFilterLanPolicyIndex, apIpFilterLanPolicyPolicy, apIpFilterLanPolicyDirection, apIpFilterLanPolicyAction, apIpFilterLanPolicyRowStatus, apIpFilterLanIndex, apWlanMuIdleTimeout, apRadioCfgExceptionChannel, apRadioNSettingsMode, apRadioNSettingsHTProtectionStatus, apRadioNSettingsBasicRates, apRadioNCfgPosChannel, apRadioNCfgDesChannel, apRadioNCfgChannel, apRadioNCfgChannelWidth, apRadioNCfgAmsduAggregationMaxRecvSize, apRadioNCfgAmsduTransmitEnabled, apRadioNCfgAmpduAggregationMaxRecvSize, apRadioNCfgAmpduAggregationDensity, apRadioNCfgAmpduTransmitSizeLimit, apRadioNCfgShortGuardInterval, apRadioNCfgAmpduTransmitEnabled, apRadioNCfgChannelOffset, apRadioNMcsRateIndex, apRadioNMcsRate20MHzChanSgiDisabled, apRadioNMcsRate40MHzChanSgiDisabled, apRadioNMcsRate40MHzChanSgiEnabled, apRadioNMcsRateType, apRadioNMcsRateEnabled, apPowerMode, apPowerDefRadio, apPowerStatus, apIpFilterWlanInPackets, apIpFilterWlanOutPackets, apIpFilterWlanPolicyPackets, apIpFilterLanInPackets, apIpFilterLanOutPackets, apIpFilterLanPolicyPackets, apRadioCfgMaxMus, apPowerOption3af, apPowerOption3at, apWlanVlanMode, apRadioSettingsBestEffortTxopsTimeInMS, apRadioSettingsVoiceTxopsTimeInMS, apRadioE2BMapStatusBcMcEncCipher, apWlanCryptoKeyguardPassKey, apIpFilterPolicyStartPort, apRadioSensorOnlyModeEnabled, apHotSpotLoadCfgDeleteAll, apWlanCryptoWepMixedMode, apWlanCryptoCcmpWepMixedMode, apRadioSettingsDynamicChainSelectEnable, apIpFilterPolicyEndPort, apRadioQuickSetup } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 2 } -- 1.3.6.1.4.1.388.11.3.1000.1.3 apSwitchGroup OBJECT-GROUP OBJECTS { apVlanIndex, apVlanId, apVlanRowStatus, apVlanPointerToWlan, apVlanName, apWnmpPingDestMu, apWnmpPingDestAP, apWnmpPingDest, apWnmpPingNum, apWnmpPingPacketLength, apWnmpPingPacketData, apWnmpPingAction, apWnmpPingNumResponses, apFlashLedDestAP, apFlashLedAction, apKnownApMac, apKnownApIndex, apKnownApIp, apKnownApMu, apKnownApType, apKnownApUnitName, apKnownApPktsPerSec, apSubnetDhcpState, apLan802dt1xAuthLogin, apLan802dt1xAuthPass, apKnownApKbPerSec, apKnownApFwVers, apLanTypeFilterIndex, apLanTypeFilter, apLanTypeFilterRowStatus, apWanVpnKeyAutoSALifeTime, apLanTimeOutValue, apLanTimeOut, apKnownApEssName, apKnownApRadioType1, apKnownApRadioType2, apKnownApChannel1, apKnownApChannel2, apWirelessWanRemoteGw1, apWirelessWanRemoteGw2, apWirelessWanRemoteGw3, apWirelessWanApName, apWirelessWanTunnelInterface, apWirelessWanTunnelRemoteSubnetMask, apWirelessWanTunnelEncryptionType, apWirelessWanTunnelRemoteGateway, apWirelessWanTunnelPassPhrase, apWirelessWanTunnelRemoteIp, apWirelessWanTunnelRequired, apLldpTxHoldMultiplier, apLldpTxInterval, apLldpAdminStatus, apKnownApSendCfgStatus, apKnownApSendCfg } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 3 } -- 1.3.6.1.4.1.388.11.3.1000.1.4 apTrapCtrlGroup OBJECT-GROUP OBJECTS { apTrapCtrlRateLimit, apTrapCtrlSumStatsIndex, apTrapCtrlSumStatsDescr, apTrapCtrlSumStatsUnits, apTrapCtrlSumStatsCanBeSetMu, apTrapCtrlSumStatsThresholdMu, apTrapCtrlSumStatsCanBeSetRadioA, apTrapCtrlSumStatsThresholdRadioA, apTrapCtrlSumStatsCanBeSetRadioBG, apTrapCtrlSumStatsThresholdRadioBG, apTrapCtrlSumStatsCanBeSetWlan, apTrapCtrlSumStatsThresholdWlans, apTrapCtrlSumStatsCanBeSetAccessPoint, apTrapCtrlSumStatsThresholdAccessPoint, apTrapCtrlEnableIndex, apTrapCtrlEnableName, apTrapCtrlEnable, apTrapRadioMac, apTrapLanMonitorReason, apTrapWpaCounterMeasureEssid, apTrapCtrlSumStatsCanBeSetRadioN2400MHz, apTrapCtrlSumStatsThresholdRadioN2400MHz, apTrapCtrlSumStatsCanBeSetRadioN5000MHz, apTrapCtrlSumStatsThresholdRadioN5000MHz, apTrapWirelessWanDetectStatus, apTrapWirelessWanXCRDPresentStatus, apTrapWirelessWanConnectionStatus, apTrapLanMonitorMode, apTrapMuMac } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 4 } -- 1.3.6.1.4.1.388.11.3.1000.1.5 apRapGroup OBJECT-GROUP OBJECTS { apRapDetectorMode } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 5 } -- 1.3.6.1.4.1.388.11.3.1000.1.6 apLoadCfgGroup OBJECT-GROUP OBJECTS { apLoadCfgOperation, apLoadCfgServerPath, apLoadCfgServerFilename, apLoadCfgServerIpAddr, apLoadCfgFtpUsername, apLoadCfgFtpPassword, apLoadCfgStart, apLoadCfgOperationsDone, apLoadCfgResult, apLoadCfgSuccess } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 6 } -- 1.3.6.1.4.1.388.11.3.1000.1.7 apStatsGroup OBJECT-GROUP OBJECTS { apWanClearStats, apLanClearStats, apRadioClearStats, apWlanClearStats, apMuClearStats, apKnownAPClearStats, apDiagRamTotal, apnPortalRxOctetsAt1Mb, apnPortalRxOctetsAt2Mb, apnPortalRxOctetsAt5pt5Mb, apnPortalRxOctetsAt6Mb, apnPortalRxOctetsAt9Mb, apnPortalRxOctetsAt11Mb, apnPortalRxOctetsAt12Mb, apnPortalRxOctetsAt18Mb, apnPortalRxOctetsAt24Mb, apnPortalRxOctetsAt36Mb, apnPortalRxOctetsAt48Mb, apnPortalRxOctetsAt54Mb, apnPortalRxOctetsAtMCS0, apnPortalRxOctetsAtMCS1, apnPortalRxOctetsAtMCS2, apnPortalRxOctetsAtMCS3, apnPortalRxOctetsAtMCS4, apnPortalRxOctetsAtMCS5, apnPortalRxOctetsAtMCS6, apnPortalRxOctetsAtMCS7, apnPortalRxOctetsAtMCS8, apnPortalRxOctetsAtMCS9, apnPortalRxOctetsAtMCS10, apnPortalRxOctetsAtMCS11, apnPortalRxOctetsAtMCS12, apnPortalRxOctetsAtMCS13, apnPortalRxOctetsAtMCS14, apnPortalRxOctetsAtMCS15, apnPortalTxOctetsAt1Mb, apnPortalTxOctetsAt2Mb, apnPortalTxOctetsAt5pt5Mb, apnPortalTxOctetsAt6Mb, apnPortalTxOctetsAt9Mb, apnPortalTxOctetsAt11Mb, apnPortalTxOctetsAt12Mb, apnPortalTxOctetsAt18Mb, apnPortalTxOctetsAt24Mb, apnPortalTxOctetsAt36Mb, apnPortalTxOctetsAt48Mb, apnPortalTxOctetsAt54Mb, apnPortalTxOctetsAtMCS0, apnPortalTxOctetsAtMCS1, apnPortalTxOctetsAtMCS2, apnPortalTxOctetsAtMCS3, apnPortalTxOctetsAtMCS4, apnPortalTxOctetsAtMCS5, apnPortalTxOctetsAtMCS6, apnPortalTxOctetsAtMCS7, apnPortalTxOctetsAtMCS8, apnPortalTxOctetsAtMCS9, apnPortalTxOctetsAtMCS10, apnPortalTxOctetsAtMCS11, apnPortalTxOctetsAtMCS12, apnPortalTxOctetsAtMCS13, apnPortalTxOctetsAtMCS14, apnPortalTxOctetsAtMCS15, apnMuRxOctetsAt1Mb, apnMuRxOctetsAt2Mb, apnMuRxOctetsAt5pt5Mb, apnMuRxOctetsAt6Mb, apnMuRxOctetsAt9Mb, apnMuRxOctetsAt11Mb, apnMuRxOctetsAt12Mb, apnMuRxOctetsAt18Mb, apnMuRxOctetsAt24Mb, apnMuRxOctetsAt36Mb, apnMuRxOctetsAt48Mb, apnMuRxOctetsAt54Mb, apnMuRxOctetsAtMCS0, apnMuRxOctetsAtMCS1, apnMuRxOctetsAtMCS2, apnMuRxOctetsAtMCS3, apnMuRxOctetsAtMCS4, apnMuRxOctetsAtMCS5, apnMuRxOctetsAtMCS6, apnMuRxOctetsAtMCS7, apnMuRxOctetsAtMCS8, apnMuRxOctetsAtMCS9, apnMuRxOctetsAtMCS10, apnMuRxOctetsAtMCS11, apnMuRxOctetsAtMCS12, apnMuRxOctetsAtMCS13, apnMuRxOctetsAtMCS14, apnMuRxOctetsAtMCS15, apnMuTxOctetsAt1Mb, apnMuTxOctetsAt2Mb, apnMuTxOctetsAt5pt5Mb, apnMuTxOctetsAt6Mb, apnMuTxOctetsAt9Mb, apnMuTxOctetsAt11Mb, apnMuTxOctetsAt12Mb, apnMuTxOctetsAt18Mb, apnMuTxOctetsAt24Mb, apnMuTxOctetsAt36Mb, apnMuTxOctetsAt48Mb, apnMuTxOctetsAt54Mb, apnMuTxOctetsAtMCS0, apnMuTxOctetsAtMCS1, apnMuTxOctetsAtMCS2, apnMuTxOctetsAtMCS3, apnMuTxOctetsAtMCS4, apnMuTxOctetsAtMCS5, apnMuTxOctetsAtMCS6, apnMuTxOctetsAtMCS7, apnMuTxOctetsAtMCS8, apnMuTxOctetsAtMCS9, apnMuTxOctetsAtMCS10, apnMuTxOctetsAtMCS11, apnMuTxOctetsAtMCS12, apnMuTxOctetsAtMCS13, apnMuTxOctetsAtMCS14, apnMuTxOctetsAtMCS15, apnWlanRxOctetsAt1Mb, apnWlanRxOctetsAt2Mb, apnWlanRxOctetsAt5pt5Mb, apnWlanRxOctetsAt6Mb, apnWlanRxOctetsAt9Mb, apnWlanRxOctetsAt11Mb, apnWlanRxOctetsAt12Mb, apnWlanRxOctetsAt18Mb, apnWlanRxOctetsAt24Mb, apnWlanRxOctetsAt36Mb, apnWlanRxOctetsAt48Mb, apnWlanRxOctetsAt54Mb, apnWlanRxOctetsAtMCS0, apnWlanRxOctetsAtMCS1, apnWlanRxOctetsAtMCS2, apnWlanRxOctetsAtMCS3, apnWlanRxOctetsAtMCS4, apnWlanRxOctetsAtMCS5, apnWlanRxOctetsAtMCS6, apnWlanRxOctetsAtMCS7, apnWlanRxOctetsAtMCS8, apnWlanRxOctetsAtMCS9, apnWlanRxOctetsAtMCS10, apnWlanRxOctetsAtMCS11, apnWlanRxOctetsAtMCS12, apnWlanRxOctetsAtMCS13, apnWlanRxOctetsAtMCS14, apnWlanRxOctetsAtMCS15, apnWlanTxOctetsAt1Mb, apnWlanTxOctetsAt2Mb, apnWlanTxOctetsAt5pt5Mb, apnWlanTxOctetsAt6Mb, apnWlanTxOctetsAt9Mb, apnWlanTxOctetsAt11Mb, apnWlanTxOctetsAt12Mb, apnWlanTxOctetsAt18Mb, apnWlanTxOctetsAt24Mb, apnWlanTxOctetsAt36Mb, apnWlanTxOctetsAt48Mb, apnWlanTxOctetsAt54Mb, apnWlanTxOctetsAtMCS0, apnWlanTxOctetsAtMCS1, apnWlanTxOctetsAtMCS2, apnWlanTxOctetsAtMCS3, apnWlanTxOctetsAtMCS4, apnWlanTxOctetsAtMCS5, apnWlanTxOctetsAtMCS6, apnWlanTxOctetsAtMCS7, apnWlanTxOctetsAtMCS8, apnWlanTxOctetsAtMCS9, apnWlanTxOctetsAtMCS10, apnWlanTxOctetsAtMCS11, apnWlanTxOctetsAtMCS12, apnWlanTxOctetsAtMCS13, apnWlanTxOctetsAtMCS14, apnWlanTxOctetsAtMCS15, apLanRxDropped, apLanRxFrameErrors, apLanInfoSpeed, apLanInfoDuplexMode, apLanRxPkts, apLanRxBytes, apLanRxErrors, apLanInfoIndex, apLanInfoEnabled, apLanInfoIpAddress, apLanInfoNetworkMask, apLanInfoEthernetAddress, apLanTxPkts, apLanTxBytes, apLanTxErrors, apLanTxDropped, apLanTxFrameErrors, apDiagRamUsed, apDiagCpuLoad1Min, apDiagCpuLoad5Min, apDiagCpuLoad15Min, apDiagRamPercentageUsed } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 7 } -- 1.3.6.1.4.1.388.11.3.1000.1.8 apNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { apWpaCounterMeasure, apWlanKerberosAuthFailed, apWirelessWanDisconnect, apWirelessWanConnect, apLanMonitor, apMuVlan, apWirelessWanCardPresent, apWirelessWanCardState } STATUS current DESCRIPTION " " ::= { apGroupsV1dot0 8 } -- 1.3.6.1.4.1.388.11.3.1000.2 apGroupsV1dot1 OBJECT IDENTIFIER ::= { apGroups 2 } -- 1.3.6.1.4.1.388.11.3.1000.2.1 apGroupV1dot1variables OBJECT-GROUP OBJECTS { apSubnetTypeFilterAccessMode, apSubnetVlanEnable, apLanTypeFilterSubnetIndex, apMgmtAccessToAllow, apTrapCtrlMuMac, apTrapCtrlMuHotspotStateChange, apHotSpotDefaultFileMode, apHotSpotExternalLoginPageUrl, apHotSpotExternalWelomePageUrl, apHotSpotExternalFailPageUrl, apHotSpotRadiusAcctMode, apHotSpotRadiusAcctTimeout, apHotSpotRadiusAcctRetryCount, apHotSpotPriRadiusServerIp, apHotSpotPriRadiusPort, apHotSpotPriRadiusSecret, apHotSpotSecRadiusServerIp, apHotSpotSecRadiusPort, apHotSpotSecRadiusSecret, apHotSpotWhiteListIndex, apHotSpotWhiteListWalledGardenIp, apHotSpotWhiteListRowStatus, apLanEthernetPort, apWlanSubnet, apRouterDefaultGatewayInterface, apWlanAuthEapRadiusExtAcctServer, apWlanAuthEapRadiusExtPort, apWlanAuthEapRadiusExtSharedSecret, apManualCurrSystemDateTime, apManualTimeZoneIndex, apManualTimeZoneName, apManualExpectedTimeZone, apHotSpotRadiusAcctServerIp, apHotSpotRadiusAcctPort, apHotSpotRadiusAcctSecret, apRadioSettingsERPProtectionStatus, apWlanClientBackHaul, apKnownApIndex, apKnownApRadio1ClientBridgeMac1, apKnownApRadio1ClientBridgeMac2, apKnownApRadio1ClientBridgeMac3, apKnownApRadio2ClientBridgeMac1, apKnownApRadio2ClientBridgeMac2, apKnownApRadio2ClientBridgeMac3, apWanPppoeClientIndex, apWanPppoeClientIp, apWanPppoeClientGateway, apWanPppoeClientPrimaryDNSServer, apWanPppoeClientSecondaryDNSServer, apSubnetAdminVlanTag, apSubnetNativeVlanTag, apRadioBssDtimPrd, apWlanHotspot, apManualTimeZoneSet, apManualExpectedYear, apManualExpectedMonth, apManualExpectedDay, apManualExpectedHour, apManualExpectedMinutes, apManualExpectedSeconds, apManualDateTimeSet, apWlanWMMQosParam, apRadioSettingsWMMQosParam, apRadioMeshBaseBridgeMode, apRadioMeshMaxClients, apRadioMeshClientBridgeMode, apRadioMeshWlanPtr, apLanBridgePriority, apLanBridgeMaxMsgAge, apMeshStatsIndex, apMeshStatsConnType, apMeshStatsMac, apMeshStatsWlanPtr, apMeshStatsRadioType, apMeshStatsThroughput, apMeshStatsAvgBitSpeed, apMeshStatsRetries, apMeshBridgeStatsIndex, apMeshBridgeStatsMac, apMeshBridgeStatsWlanPtr, apMeshBridgeStatsLanPtr, apMeshBridgeStatsRadioType, apMeshBridgeStatsAuthType, apMeshBridgeStatsEncType, apMeshBridgeStatsPktsPerSecRx, apMeshBridgeStatsPksPerSecTx, apMeshBridgeStatsPktsPerSecTotal, apMeshBridgeStatsThroughputRx, apMeshBridgeStatsThroughputTx, apMeshBridgeStatsThroughputTotal, apMeshBridgeStatsAvgBitSpeed, apMeshBridgeStatsAvgMuSignal, apMeshBridgeStatsAvgMuNoise, apMeshBridgeStatsAvgMuSnr, apMeshBridgeStatsAvgRetries, apMeshBridgeStatsPktsDropped, apLanSTPStatsDesignatedRoot, apLanSTPStatsBridgeId, apLanSTPStatsRootPort, apLanSTPStatsRootPathCost, apLanSTPStatsBridgeMaxMsgAge, apLanSTPStatsBridgeHelloTime, apLanSTPStatsBridgeFwDelay, apLanSTPStatsPortIntfLanIndex, apLanSTPStatsPortIntfPortIndex, apLanSTPStatsPortIntfPortName, apLanSTPStatsPortIntfState, apLanSTPStatsPortIntfPathCost, apLanSTPStatsPortIntfDsgRoot, apLanSTPStatsPortIntfDsgBridge, apLanSTPStatsPortIntfDsgPort, apLanSTPStatsPortIntfDsgCost, apWlanCryptoKeyguardMixedMode, apWlanCryptoWepMixedMode, apRadioMeshConnAutoSelect, apRadioMeshAvailableConnIndex, apRadioMeshAvailableConnMac, apRadioMeshAvailableConnChannel, apRadioMeshAvailableConnRssi, apRadioMeshPreferredConnPriority, apRadioMeshPreferredConnMac, apRadioMeshPreferredConnRowStatus, apRadioMeshPreferredConnIndex, apTrapVlanId, apHotSpotRadiusSessMode, apHotSpotRadiusSessTimeout, apLanPortDuplex, apLanPortSpeed, apLanPortAutoNegotiation, apWanPortDuplex, apWanPortSpeed, apWanPortAutoNegotiation, apRadioMeshTimeout, apRadioMeshTimeoutValue, apWlanCryptoTkipFastRoamPreAuth, apWlanCryptoTkipAllowWpa2Client, apWanDynDNSMode, apWanDynDNSUsername, apWanDynDNSPassword, apWanDynDNSHostname, apWanDynDNSIndex, apWanDynDNSUpdateHostname, apWanDynDNSUpdateIp, apWanDynDNSUpdateStatus, apWanDynDNSUpdateResponseIndex, apWanDynDNSPerformUpdate, apTrapCtrlDynDNSUpdateIp, apTrapCtrlDynDNSUpdateHostname, apTrapCtrlDynDNSUpdateStatus, apLoginMessageMode, apLoginMessageText, apRadioSettingsQBSSChannelBeaconInt, apRadiusUsersGroup, apRadiusUsersGroupRowStatus, apRadiusUsersGroupId, apRadiusAccessWlanPtrs, apRadiusAccessTimeRule, apRadioSettingsQBSSLoadElementMode, apRapDetectorABGMode, apMeshBridgeStatsUndecryptablePkts, apLanBridgeHelloTime, apLanBridgeFwdDelay, apLanBridgeEntryAgeout, apAapSwitchDiscoveryIPAddressRowStatus, apAapSwitchDiscoveryIPAddress, apAapSwitchDiscoveryIPAddressIndex, apAapSwitchDiscoveryPort, apAapSwitchDiscoveryInterface, apAapSwitchDiscoveryDomainName, apAapTunnelToSwitchEnable, apAapAcKeepAlive, apAapAdoptionState, apAapAdoptingSwitchIP, apMuLocationingIndex, apMuLocationingMuMac, apMuLocationingPortalMac, apMuLocationingSignalStrength, apMuLocationingHeardChannel, apMuLocationingHeardTime, apMuLocationingAddMuMac, apMuLocationingAddPortalMac, apMuLocationingAddSignalStrength, apMuLocationingAddHeardChannel, apMuLocationingAddHeardTime, apAapPassphrase, apWipsSecondaryServerAddr, apWipsPrimaryServerAddr, apTrustedHostEnable, apTrustedHostRangeIndex, apTrustedHostRangeLowerIp, apTrustedHostRangeUpperIp, apAapSwitchAutoDiscoveryEnable, apMuLocationingEnable, apMuLocationingClear, apWlanGlobalRateLimitEnabled, apWlanRateLimitWiredToWireless, apWlanRateLimitWirelessToWired, apMgmtAccessDisableSslV2, apSubnetNativeVlanTagMode, apWirelessWanMode, apWirelessWanState, apHotSpotLoadCfgSetDefault, apHotSpotLoadCfgSuccess, apHotSpotLoadCfgResult, apHotSpotLoadCfgOperationsDone, apHotSpotLoadCfgStart, apHotSpotLoadCfgFtpPassword, apHotSpotLoadCfgFtpUsername, apHotSpotLoadCfgServerIpAddr, apHotSpotLoadCfgServerFilename, apHotSpotLoadCfgServerPath, apHotSpotLoadCfgOperation, apRadioCfgBcMcTxControl, apRadioSettingsTxPowerAntennaGain, apLEDEnabled, apMuLocationingMaxMus, apWlanRateLimitEnabled, apWirelessWanUsername, apWirelessWanPassword, apWlanProxyARPEnable } STATUS current DESCRIPTION "Description." ::= { apGroupsV1dot1 1 } -- 1.3.6.1.4.1.388.11.3.1000.2.2 apGroupV1dot1obsoleted OBJECT-GROUP OBJECTS { apLanAdminVlanTag, apLanNativeVlanTag, apRadioSettingsDtimPrd, apRadioSettingsVoiceMode, apRadioSettingsVideoMode, apRadioSettingsBestEffortMode, apRadioSettingsBackgroundMode, apWlanWeight, apLanTypeFilterAccessMode, apLanVlanEnable } STATUS obsolete DESCRIPTION "Description." ::= { apGroupsV1dot1 2 } -- 1.3.6.1.4.1.388.11.3.1000.2.3 apGroupV1dot1deprecated OBJECT-GROUP OBJECTS { apWlanBwShareMode, apRadioWlanWeight, apnWlanRxPktsAt1Mb, apnWlanRxPktsAt2Mb, apnWlanRxPktsAt5pt5Mb, apnWlanRxPktsAt6Mb, apnWlanRxPktsAt9Mb, apnWlanRxPktsAt11Mb, apnWlanRxPktsAt12Mb, apnWlanRxPktsAt18Mb, apnWlanRxPktsAt24Mb, apnWlanRxPktsAt36Mb, apnWlanRxPktsAt48Mb, apnWlanRxPktsAt54Mb, apnWlanRxPktsAtMCS0, apnWlanRxPktsAtMCS1, apnWlanRxPktsAtMCS2, apnWlanRxPktsAtMCS3, apnWlanRxPktsAtMCS4, apnWlanRxPktsAtMCS5, apnWlanRxPktsAtMCS6, apnWlanRxPktsAtMCS7, apnWlanRxPktsAtMCS8, apnWlanRxPktsAtMCS9, apnWlanRxPktsAtMCS10, apnWlanRxPktsAtMCS11, apnWlanRxPktsAtMCS12, apnWlanRxPktsAtMCS13, apnWlanRxPktsAtMCS14, apnWlanRxPktsAtMCS15, apnWlanTxPktsAt1Mb, apnWlanTxPktsAt2Mb, apnWlanTxPktsAt5pt5Mb, apnWlanTxPktsAt6Mb, apnWlanTxPktsAt9Mb, apnWlanTxPktsAt11Mb, apnWlanTxPktsAt12Mb, apnWlanTxPktsAt18Mb, apnWlanTxPktsAt24Mb, apnWlanTxPktsAt36Mb, apnWlanTxPktsAt48Mb, apnWlanTxPktsAt54Mb, apnWlanTxPktsAtMCS0, apnWlanTxPktsAtMCS1, apnWlanTxPktsAtMCS2, apnWlanTxPktsAtMCS3, apnWlanTxPktsAtMCS4, apnWlanTxPktsAtMCS5, apnWlanTxPktsAtMCS6, apnWlanTxPktsAtMCS7, apnWlanTxPktsAtMCS8, apnWlanTxPktsAtMCS9, apnWlanTxPktsAtMCS10, apnWlanTxPktsAtMCS11, apnWlanTxPktsAtMCS12, apnWlanTxPktsAtMCS13, apnWlanTxPktsAtMCS14, apnWlanTxPktsAtMCS15, apnMuRxPktsAt1Mb, apnMuRxPktsAt2Mb, apnMuRxPktsAt5pt5Mb, apnMuRxPktsAt6Mb, apnMuRxPktsAt9Mb, apnMuRxPktsAt11Mb, apnMuRxPktsAt12Mb, apnMuRxPktsAt18Mb, apnMuRxPktsAt24Mb, apnMuRxPktsAt36Mb, apnMuRxPktsAt48Mb, apnMuRxPktsAt54Mb, apnMuRxPktsAtMCS0, apnMuRxPktsAtMCS1, apnMuRxPktsAtMCS2, apnMuRxPktsAtMCS3, apnMuRxPktsAtMCS4, apnMuRxPktsAtMCS5, apnMuRxPktsAtMCS6, apnMuRxPktsAtMCS7, apnMuRxPktsAtMCS8, apnMuRxPktsAtMCS9, apnMuRxPktsAtMCS10, apnMuRxPktsAtMCS11, apnMuRxPktsAtMCS12, apnMuRxPktsAtMCS13, apnMuRxPktsAtMCS14, apnMuRxPktsAtMCS15, apnMuTxPktsAt1Mb, apnMuTxPktsAt2Mb, apnMuTxPktsAt5pt5Mb, apnMuTxPktsAt6Mb, apnMuTxPktsAt9Mb, apnMuTxPktsAt11Mb, apnMuTxPktsAt12Mb, apnMuTxPktsAt18Mb, apnMuTxPktsAt24Mb, apnMuTxPktsAt36Mb, apnMuTxPktsAt48Mb, apnMuTxPktsAt54Mb, apnMuTxPktsAtMCS0, apnMuTxPktsAtMCS1, apnMuTxPktsAtMCS2, apnMuTxPktsAtMCS3, apnMuTxPktsAtMCS4, apnMuTxPktsAtMCS5, apnMuTxPktsAtMCS6, apnMuTxPktsAtMCS7, apnMuTxPktsAtMCS8, apnMuTxPktsAtMCS9, apnMuTxPktsAtMCS10, apnMuTxPktsAtMCS11, apnMuTxPktsAtMCS12, apnMuTxPktsAtMCS13, apnMuTxPktsAtMCS14, apnMuTxPktsAtMCS15, apnRadioStatsIndex, apnRadioStatsBssid, apnRadioStatsApSsid, apnRadioStatsChannel, apnRadioStatsExtnChannel, apnRadioStatsRssiAvgAcrossAntennas, apnRadioStatsChannelWidthMode, apnRadioStatsOpFreq, apnRadioStatsNumPktsRxSGI400ns, apnRadioStatsNumPktsRxSGI800ns, apnRadioStatsNumPktsTxSGI400ns, apnRadioStatsNumPktsTxSGI800ns, apnRadioStatsNumPktsRxChanWidth20MHz, apnRadioStatsNumPktsRxChanWidth40MHz, apnRadioStatsNumPktsTxChanWidth20MHz, apnRadioStatsNumPktsTxChanWidth40MHz, apnPortalRxPktsAt1Mb, apnPortalRxPktsAt2Mb, apnPortalRxPktsAt5pt5Mb, apnPortalRxPktsAt6Mb, apnPortalRxPktsAt9Mb, apnPortalRxPktsAt11Mb, apnPortalRxPktsAt12Mb, apnPortalRxPktsAt18Mb, apnPortalRxPktsAt24Mb, apnPortalRxPktsAt36Mb, apnPortalRxPktsAt48Mb, apnPortalRxPktsAt54Mb, apnPortalRxPktsAtMCS0, apnPortalRxPktsAtMCS1, apnPortalRxPktsAtMCS2, apnPortalRxPktsAtMCS3, apnPortalRxPktsAtMCS4, apnPortalRxPktsAtMCS5, apnPortalRxPktsAtMCS6, apnPortalRxPktsAtMCS7, apnPortalRxPktsAtMCS8, apnPortalRxPktsAtMCS9, apnPortalRxPktsAtMCS10, apnPortalRxPktsAtMCS11, apnPortalRxPktsAtMCS12, apnPortalRxPktsAtMCS13, apnPortalRxPktsAtMCS14, apnPortalRxPktsAtMCS15, apnPortalTxPktsAt1Mb, apnPortalTxPktsAt2Mb, apnPortalTxPktsAt5pt5Mb, apnPortalTxPktsAt6Mb, apnPortalTxPktsAt9Mb, apnPortalTxPktsAt11Mb, apnPortalTxPktsAt12Mb, apnPortalTxPktsAt18Mb, apnPortalTxPktsAt24Mb, apnPortalTxPktsAt36Mb, apnPortalTxPktsAt48Mb, apnPortalTxPktsAt54Mb, apnPortalTxPktsAtMCS0, apnPortalTxPktsAtMCS1, apnPortalTxPktsAtMCS2, apnPortalTxPktsAtMCS3, apnPortalTxPktsAtMCS4, apnPortalTxPktsAtMCS5, apnPortalTxPktsAtMCS6, apnPortalTxPktsAtMCS7, apnPortalTxPktsAtMCS8, apnPortalTxPktsAtMCS9, apnPortalTxPktsAtMCS10, apnPortalTxPktsAtMCS11, apnPortalTxPktsAtMCS12, apnPortalTxPktsAtMCS13, apnPortalTxPktsAtMCS14, apnPortalTxPktsAtMCS15, apRadioCfgRfFunction, apLanEnable, apRadioNMcsRate20MHzChanSgiEnabled } STATUS deprecated DESCRIPTION "Description." ::= { apGroupsV1dot1 3 } -- 1.3.6.1.4.1.388.11.3.1000.2.4 apGroupV1dot1notifications NOTIFICATION-GROUP NOTIFICATIONS { apMuHotspotState, apDynDNSUpdate } STATUS current DESCRIPTION "Description." ::= { apGroupsV1dot1 4 } END -- -- SYMBOL-AP-MIB-01h18.mib --