-- -- WS-CC-RF-MIB.my -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Wednesday, April 14, 2010 at 11:56:38 -- WS-CC-RF-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI PhysAddress, DisplayString, TruthValue, RowStatus, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC wsCcRf FROM WS-CC-SMI DoActionNow, MultiPointer64, MultiPointer256 FROM WS-TYPE-MIB; -- 1.3.6.1.4.1.388.14.3.2.1 wsCcRfMIB MODULE-IDENTITY LAST-UPDATED "201010122015Z" -- October 12, 2010 at 20:15 GMT ORGANIZATION "Symbol Technologies, Inc" CONTACT-INFO "Symbol Technologies, Inc. Customer Service Postal: One Symbol Plaza Holtsville, NY 11742-1300 USA Tel: +1. 631.738.6213 E-mail: support@symbol.com Web: http://www.symbol.com/support" DESCRIPTION "wsCcRfApLldp Mib changes for config support of LLDP on LCAP" REVISION "201010122016Z" -- October 12, 2010 at 20:16 GMT DESCRIPTION "03a89 Added Hotspot Splash screen (no service page) MIBs" REVISION "201008021307Z" -- August 02, 2010 at 13:07 GMT DESCRIPTION "03a88 Added wsCcRfRadioCpAcsChnExceptions" REVISION "201005192147Z" -- May 19, 2010 at 21:47 GMT DESCRIPTION "03a87 Added wsCcRfHotspotAllowEap, wsCcRfHotspotCacheAgeout, wsCcRfHotspotConnectionMode, wsCcRfHotspotNTFLogoutPort, wsCcRfHotspotQueryIndices" REVISION "201005191034Z" -- May 19, 2010 at 10:34 GMT DESCRIPTION "03a86 changed the values range for 1. wsCcRfWiredHotspotServerRetries from 1..10 to 1..100. 2. wsCcRfWiredHotspotServerTimeout from 1..60 to 1..300" REVISION "201005171412Z" -- May 17, 2010 at 14:12 GMT DESCRIPTION "03a85 Modified the RadioAntennaGain value range from 0..300 to 0..150." REVISION "201005122253Z" -- May 12, 2010 at 22:53 GMT DESCRIPTION "03a84 Added wsCcRfWiredHotspotAccountingOption." REVISION "201005122250Z" -- May 12, 2010 at 22:50 GMT DESCRIPTION "03a83 Added wsCcRfWiredHotspotPageSetDefault." REVISION "201005122245Z" -- May 12, 2010 at 22:45 GMT DESCRIPTION "03a82 Added wsCcRfSmartRadioChannelWidth." REVISION "201005070901Z" -- May 07, 2010 at 09:01 GMT DESCRIPTION "03a81 Appended enum terms for wsCcRfWiredHotspotPageType." REVISION "201004301336Z" -- April 30, 2010 at 13:36 GMT DESCRIPTION "03a80 Added wsCcRfRadioDynamicChainSelEnable for DCS configuration" REVISION "201004271823Z" -- April 27, 2010 at 18:23 GMT DESCRIPTION "03a79 Added wsCcRfProxyArpEnable." REVISION "201002231714Z" -- April 14, 2010 at 12:14 GMT DESCRIPTION "03a74 Added wsCcRfHotspotPageSetDefault in wsCcRfHotspotPageTable and removed wsCcRfHotspotAuthSetTermsDefault from HotspotAuthTable as per the backend changes." REVISION "201002181904Z" -- February 18, 2010 at 19:04 GMT DESCRIPTION "Mib for wireless features" REVISION "201004141153Z" -- April 14, 2010 at 11:53 GMT DESCRIPTION "03a78 Added wsCcRfRadioNumber." REVISION "201004081954Z" -- April 08, 2010 at 19:54 GMT DESCRIPTION "03a77 Added wsCcRfWiredHotspotVlanAuthEapRadiusDynamicAuthEnable in wsCcRfWiredHotspotVlanAuthEapTable." REVISION "201002231714Z" -- February 23, 2010 at 17:14 GMT DESCRIPTION "03a74 Added wsCcRfHotspotPageSetDefault in wsCcRfHotspotPageTable and removed wsCcRfHotspotAuthSetTermsDefault from HotspotAuthTable as per the backend changes." REVISION "201002181904Z" -- February 18, 2010 at 19:04 GMT DESCRIPTION "03a73 Added AAP Syslog config, aap LED enable, RadioAntennaGain and AAP SFTP MIBs." REVISION "201002101719Z" -- February 10, 2010 at 17:19 GMT DESCRIPTION "03a72 Added wsCcRfHotspotAuthTable MIBs." REVISION "201002011654Z" -- February 01, 2010 at 16:54 GMT DESCRIPTION "03a71 Added wsCcRfWiredHotspot MIBs." REVISION "201002011058Z" -- February 01, 2010 at 10:58 GMT DESCRIPTION "03a70 Added wsCcRfHotspotPreAuthVlan in wsCcRfHotspotTable" REVISION "200912161712Z" -- December 16, 2009 at 17:12 GMT DESCRIPTION "03a69 Added wsCcRfWlanEncAltWepTable." REVISION "200912161615Z" -- December 16, 2009 at 16:15 GMT DESCRIPTION "03a68 changed Units from KB to 0.1% for wsCcRfApResStatusMemoryFree wsCcRfApResStatusAvgMemoryFree wsCcRfApResStatusPeakMemoryFree" REVISION "200912151857Z" -- December 15, 2009 at 18:57 GMT DESCRIPTION "03a67 added wsCcRfApIfUpDownTimes to wsCcRfApIfTable changed description of wsCcRfRadioStatusUpdownTimes" REVISION "200912151441Z" -- December 15, 2009 at 14:41 GMT DESCRIPTION "03a66 For wsCcRfRapStatusApAttacked and wsCcRfRapStatusApToIgnore read-create changed to read-write." REVISION "200912151147Z" -- December 15, 2009 at 11:47 GMT DESCRIPTION "03a65 Corrected the units of wsCcRfRadioPwrAttenuation and wsCcRfRadioDefaultMaxPwrAttenuation. Changed the syntax of wsCcRfRadioStatusMode to Integer32." REVISION "200912141520Z" -- December 14, 2009 at 15:20 GMT DESCRIPTION "03a64 Delete wsCcRfRapCfgApAttacked and wsCcRfRapCfgApToIgnore from wsCcRfRapCfgEntry. Add wsCcRfRapStatusApAttacked and wsCcRfRapStatusApToIgnore to wsCcRfRapStatusEntry." REVISION "200912141037Z" -- December 14, 2009 at 10:37 GMT DESCRIPTION "03a63 Changed the syntax of wsCcRfRadioMode to Integer32 per requirements." REVISION "200912101315Z" -- December 10, 2009 at 13:15 GMT DESCRIPTION "03a62 added RogueStaMonitorNum to wsCcRfIdsStatusTable" REVISION "200912081139Z" -- December 08, 2009 at 11:39 GMT DESCRIPTION "03a61 Added the following objects: - wsCcRfMuDot11Authentication - wsCcRfMuSecurity - wsCcRfMuAltAuthentication - wsCcRfMuAltEncryption - wsCcRfWlanDot11Authentication - wsCcRfWlanSecurity - wsCcRfWlanAltEncryption Removed additional values for AuthType introduced in 03a56. Made wsCcRfRadioWlanEssid and wsCcRfRadioWlanBssid read-only. Modified the syntax of wsCcRfWlanAltAuthentication." REVISION "200912031655Z" -- December 03, 2009 at 16:55 GMT DESCRIPTION "03a60 added to the wsCcRfRadioStatusTable wsCcRfRadioStatusUpdownTimes" REVISION "200912021935Z" -- December 02, 2009 at 19:35 GMT DESCRIPTION "03a59 Added wsCcRfApExtMfgCountryCode in wsCcRfApExtTable." REVISION "200912012007Z" -- December 01, 2009 at 20:07 GMT DESCRIPTION "03a58 added wsCcRfMuBlacklistTable" REVISION "200911231304Z" -- November 23, 2009 at 13:04 GMT DESCRIPTION "03a57 Added wsCcRfRadioWlanBssIndex and wsCcRfWlanAltAuthentication." REVISION "200911191713Z" -- November 19, 2009 at 17:13 GMT DESCRIPTION "03a56 Added additional values for AuthType." REVISION "200911191631Z" -- November 19, 2009 at 16:31 GMT DESCRIPTION "03a55 added wsCcRfRapCfgSsidFilter wsCcRfRapCfgBssidFilter to wsCcRfRapCfgTable" REVISION "200911171524Z" -- November 17, 2009 at 15:24 GMT DESCRIPTION "03a54 Added AmsduTxEnable and AmsduRxLimit MIBs in wsCcRfRadio11nTable and wsCcRfRadioDefault11nTable." REVISION "200911131048Z" -- November 13, 2009 at 10:48 GMT DESCRIPTION "03a52 Added wsCcRfRadioWmmAltTable" REVISION "200911120958Z" -- November 12, 2009 at 09:58 GMT DESCRIPTION "03a51 Added wsCcRfRapStatusEncryptAlgorithm, wsCcRfRapCfgApToIgnore and wsCcRfRapCfgAPAttacked." REVISION "200911111329Z" -- November 11, 2009 at 13:29 GMT DESCRIPTION "03a50 Corrected the definition of wsCcRfRadioMode. Added wsCcRfRadioStatusMode." REVISION "200911101219Z" -- November 10, 2009 at 12:19 GMT DESCRIPTION "03a49 Corrected the unit of antenna gain objects to dbi. Renamed wsCcRfRadioMode to wsCcRfRadioWapiMode. Renamed wsCcRfRadioWlanStatusTable to wsCcRfRadioWlanTable and made it read-write. Added objects wsCcRfApCurrBss, wsCcRfRadioMode, wsCcRfApExtMonitorMode, and wsCcRfSmartRadioAntGainDbi." REVISION "200911061614Z" -- November 06, 2009 at 16:14 GMT DESCRIPTION "03a48 added columns to wsApExtTable: Lan1IpFilterRulesIn Lan1IpFilterRulesOut" REVISION "200911041128Z" -- November 04, 2009 at 11:28 GMT DESCRIPTION "03a47 added wsCcRfIpFilter node and tables added ManagementVlanId and TrunkingEnable objects to wssCcRfApExtTable" REVISION "200911021819Z" -- November 02, 2009 at 18:19 GMT DESCRIPTION "03a46 Added the following objects: - wsCcRfApUpTime - wsCcRfApOnlineTime - wsCcRfRadioCpPowerMgmtEnable - wsCcRfRadioStatusMtu - wsCcRfRadioStatusSpeed - wsCcRfRadioStatusLastChange - wsCcRfApExtIfNumber Added additional value for wsCcRfApExtOperStatus." REVISION "200910081729Z" -- October 08, 2009 at 17:29 GMT DESCRIPTION "03a45 Added wsCcRfRadioStatusCurrSecondaryChannel in wsCcRfRadioStatusTable " REVISION "200909251644Z" -- September 25, 2009 at 16:44 GMT DESCRIPTION "03a44 Added the following objects: - wsCcRfApIfInOctets - wsCcRfApIfInUcastPkts - wsCcRfApIfInNucastPkts - wsCcRfApIfInDiscards - wsCcRfApIfInErrors - wsCcRfApIfOutOctets - wsCcRfApIfOutUcastPkts - wsCcRfApIfOutNucastPkts - wsCcRfApIfOutDiscards - wsCcRfApIfOutErrors - wsCcRfApResStatusPeakMemoryFree - wsCcRfApResStatusAvgMemoryFree - wsCcRfApResStatusPeakCpuLoad - wsCcRfApResStatusAvgCpuLoad Corrected the description of wsCcRfApResStatusCpuLoad." REVISION "200909181410Z" -- September 18, 2009 at 14:10 GMT DESCRIPTION "03a43 Added the following objects: - wsCcRfRapStatusVendorName - wsCcRfRapStatusFirstTimeSeen - wsCcRfRapStatusBeaconInterval - wsCcRfRapStatusContained - wsCcRfRapStatusEncEnable - wsCcRfRapPermittedVendorTable - wsCcRfIdsStatusVendorName - wsCcRfIdsStatusFirstTimeSeen - wsCcRfIdsStatusLastTimeSeen - wsCcRfIdsStatusMaxSignal - wsCcRfIdsStatusChannel - wsCcRfIdsStatusContained - wsCcRfIdsStatusAdhoc - wsCcRfIdsStatusFilteredMacCurr" REVISION "200909151331Z" -- September 15, 2009 at 13:31 GMT DESCRIPTION "03a42 Corrected the value ranges in the description of wsCcRfMuLoadBalancingThresh and wsCcRfMuLoadBalancingDiffThresh." REVISION "200909101410Z" -- September 10, 2009 at 14:10 GMT DESCRIPTION "03a41 Added the following objects: - wsCcRfRadioRfEnable - wsCcRfRadioPwrAttenuation - wsCcRfRadioShortRetryLimit - wsCcRfRadioLongRetryLimit - wsCcRfRadioMaxRxLifetime - wsCcRfRadioDefaultMaxPwrAttenuation - wsCcRfRadioStatusCurrBss - wsCcRfMuCurrChannel - wsCcRfMuEssid - wsCcRfMuLoadBalancingTable Added the value disable for wsCcRfMuLoadBalancingMethod." REVISION "200908281334Z" -- August 28, 2009 at 13:34 GMT DESCRIPTION "03a40 Added the following objects: - wsCcRfApId - wsCcRfApIfApId - wsCcRfApResStatusCpuType - wsCcRfRadioApId - wsCcRfRadioCpApId - wsCcRfRadioStatusApId - wsCcRfMuMaxCount - wsCcRfApExtNetworkElementId - wsCcRfApExtApId - wsCcRfApExtCpuUsageThresh - wsCcRfApExtMemoryUsageThresh - wsCcRfSmartRadioApId" REVISION "200908041813Z" -- August 04, 2009 at 18:13 GMT DESCRIPTION "03a39 Added range for wsCcRfRadioRtsThresh. Added range and updated description of wsCcRfMuSessionTimeout." REVISION "200907171106Z" -- July 17, 2009 at 11:06 GMT DESCRIPTION "03a38 Added the following objects: - wsCcRfApUpCount - wsCcRfApDownCount - wsCcRfApResStatusMemoryType - wsCcRfApResStatusFlashType - wsCcRfRadio11bRatesEnable - wsCcRfRadioFragmentationThresh - wsCcRfRadioMode - wsCcRfRadioWlanStatusTable - wsCcRfWlanAuthMethodSupportedTable - wsCcRfApExtReload" REVISION "200907141105Z" -- July 14, 2009 at 11:05 GMT DESCRIPTION "03a37 Reversed the order of indices in wsCcRfApHistoryTable." REVISION "200906291656Z" -- June 29, 2009 at 16:56 GMT DESCRIPTION "03a36 Added wsCcRfRapIgnoredApTimeout scalar to wsCcRfRap node" REVISION "200906241334Z" -- June 24, 2009 at 13:34 GMT DESCRIPTION "03a35 1. Removed column wsCcRfApRadioConfiguration from wsCcRfApTable. 2. Added column wsCcRfApExtRadioConfiguration to wsCcRfApExtTable." REVISION "200906231759Z" -- June 23, 2009 at 17:59 GMT DESCRIPTION "03a34 changed IdsViolationType names to match cli" REVISION "200906221649Z" -- June 22, 2009 at 16:49 GMT DESCRIPTION "03a33 1. Removed wsCcRfRadioRfFunctionTable. 2. Added column wsCcRfApRadioConfiguration to wsCcRfApTable." REVISION "200906191118Z" -- June 19, 2009 at 11:18 GMT DESCRIPTION "03a32 Added the object wsCcRfApExtLan1NativeVlanId. Also, corrected the description of wsCcRfApAapImgUpdStart." REVISION "200906151035Z" -- June 15, 2009 at 10:35 GMT DESCRIPTION "03a31 Corrected the range of wsCcRfMuRateLimitingUp and wsCcRfMuRateLimitingDown." REVISION "200905121119Z" -- May 12, 2009 at 11:19 GMT DESCRIPTION "03a29. Added the object wsCcRfWlanDenyStaticMUEnable." REVISION "200905060959Z" -- May 06, 2009 at 09:59 GMT DESCRIPTION "03a28 Added wsCcRfApNumRadiosTotal to wsCcRfApTable to get the total number of Radios on the AP" REVISION "200905041241Z" -- May 04, 2009 at 12:41 GMT DESCRIPTION "03a26 Updating the description and modified the range for wsCcRfRapMuAssistType and wsCcRfRapStatusType " REVISION "200905041130Z" -- May 04, 2009 at 11:30 GMT DESCRIPTION "03a25 Added wsCcRfRadioRfFunctionTable a table of RF-Functions. Deprecated object wsCcRfRadioRfFunctionWipsEnable" REVISION "200904281152Z" -- April 28, 2009 at 11:52 GMT DESCRIPTION "03a24 Added objects wsCcRfRadioBridgeMaxClientBridgeMeshAssocs, wsCcRfApExtLan1NativeVlanTag, and wsCcRfApExtLan2NativeVlanTag." REVISION "200904270924Z" -- April 27, 2009 at 09:24 GMT DESCRIPTION "03a23 Added the object wsCcRfApAdoptionMode." REVISION "200904241159Z" -- April 24, 2009 at 11:59 GMT DESCRIPTION "03a22 Updated the ranges for wsCcRfWlanSAQueryMaxTimeout and wsCcRfWlanSAQueryRetryTimeout." REVISION "200904231338Z" -- April 23, 2009 at 13:38 GMT DESCRIPTION "03a21 Added the following objects: - wsCcRfRadioStatusCurrWlans - wsCcRfMuUpTime - wsCcRfApExtOperStatus - wsCcRfApResStatusTable and subobjects - wsCcRfMuLoadBalancing and subobjects" REVISION "200904221616Z" -- April 22, 2009 at 16:16 GMT DESCRIPTION "03a20 Made object wsCcRfWlanDot11iSha256Enabled read-only for now. It will be used in future. Added default values for wsCcRfWlanSAQueryMaxTimeout and wsCcRfWlanSAQueryRetryTimeout." REVISION "200904211414Z" -- April 21, 2009 at 14:14 GMT DESCRIPTION "03a19 Adding a new column wsCcRfRapMuAssistType in wsCcRfRapMuAssistTable" REVISION "200904171036Z" -- April 17, 2009 at 10:36 GMT DESCRIPTION "03a18 Added wsCcRfIdsDisabled - to disable/enable IDS " REVISION "200904151146Z" -- April 15, 2009 at 11:46 GMT DESCRIPTION "03a17 Changed the range of wsCcRfHotspotWhiteIpRuleIndex from 1..10 to 1..32." REVISION "200904141109Z" -- April 14, 2009 at 11:09 GMT DESCRIPTION "03a16 Added support for third Radio in wsCcRfApTable. Added new radio state - disabled" REVISION "200904091105Z" -- April 09, 2009 at 11:05 GMT DESCRIPTION "03a15 Moved WAPI unicast and multicast key (USK and MSK) refresh and base key (BK) configuration objects from wsCcRfWapiRadioTable to wsCcRfWapiWlanTable. Also renumbered objects under wsCcRfWapiRadioEntry." REVISION "200904031756Z" -- April 03, 2009 at 17:56 GMT DESCRIPTION "03a14 Added DoActionNow scalar to reset IDS threshold table and IDS trigger conditions table to default. Also corrected some typos in MFP changes." REVISION "200903311531Z" -- March 31, 2009 at 15:31 GMT DESCRIPTION "03a13 Added four 802.11w MFP related objects to wsCcRfWlanTable." REVISION "200903181614Z" -- March 18, 2009 at 16:14 GMT DESCRIPTION "03a12 Added wsCcRfIdsSuspiciousAPSignalStrengthThreshold parameter for violWipsSuspiciousAP IDS event Added table wsCcRfIdsApDefaultSSIDTable additional parameter for violWipsAPDefaultConfig IDS event" REVISION "200903181450Z" -- March 18, 2009 at 14:50 GMT DESCRIPTION "03a11 Corrected the range of wsCcRfRadioBridgeLinkTimeout." REVISION "200903171621Z" -- March 17, 2009 at 16:21 GMT DESCRIPTION "03a10 Added following additional values to type IdsViolationType violWipsAPDefaultConfig, violWipsExcessEapFlood, violWipsAPIDTheft, violWipsSuspiciousAP, violWipsAuthDeviceAdhocMode, violWipsFakeAPFlood, violWipsAdhocWithAuthSSID, violWipsUnauthAPWithAuthSSID" REVISION "200903171628Z" -- March 17, 2009 at 16:28 GMT DESCRIPTION "03a09 Added a new table wsCcRfIdsTriggerConditionsTable with index inherited from wsCcRfIdsThresholdsTable with three new colums wsCcRfIdsTriggerAuthorizedEnabled wsCcRfIdsTriggerUnauthorizedEnabled and wsCcRfIdsTriggerIgnoredEnabled These are additional configuration parameters to each IDS violations " REVISION "200903041354Z" -- March 04, 2009 at 13:54 GMT DESCRIPTION "03a08 Added cryptoWep128Keyguard and cryptoTkipCcmp to type assignment EncType." REVISION "200903031640Z" -- March 03, 2009 at 16:40 GMT DESCRIPTION "03a07 Added WAPI to types EncType and EncMap. Also added objects wsCcRfWlanRateLimitingUp and wsCcRfWlanRateLimitingDown." REVISION "200902261425Z" -- February 26, 2009 at 14:25 GMT DESCRIPTION "03a06 Added node wsCcRfWapi and sub objects for WAPI." REVISION "200902201346Z" -- February 20, 2009 at 13:46 GMT DESCRIPTION "03a05 Added the object wsCcRfRapUnapprovedApCnt." REVISION "200902190027Z" -- February 19, 2009 at 00:27 GMT DESCRIPTION "03a04 Updates for 802.11k" REVISION "200902121219Z" -- February 12, 2009 at 12:19 GMT DESCRIPTION "03a03. Added new objects wsCcRfRapLocationingChannelSetForRadioAN and wsCcRfRapLocationingChannelSetForRadioBGN." REVISION "200902111310Z" -- February 11, 2009 at 13:10 GMT DESCRIPTION "03a02. Added new values for wsCcRfRapStatusType." REVISION "200902051455Z" -- February 05, 2009 at 14:55 GMT DESCRIPTION "03a01. Added wsCcRfWlanHttpAlgEnable." REVISION "200901261603Z" -- January 26, 2009 at 16:03 GMT DESCRIPTION "02a99 Added new object wsCcRfRapCfgType and added one more value to wsCcRfRapStatusType" REVISION "200812301141Z" -- December 30, 2008 at 11:41 GMT DESCRIPTION "02a98 Added new objects wsCcRfWlanAuthEapAapProxyRealm and wsCcRfWlanAuthEapAapProxyRealmStripEnable. Corrected the syntax of wsCcRfRadioBridgeMaxClientBridges. Added default value for wsCcRfWlanAuthEapAapProxyRadiusEnable." REVISION "200812151311Z" -- December 15, 2008 at 13:11 GMT DESCRIPTION "02a97 Changed the minimum value of wsCcRfWlanEncTkipCcmpKeyInterval from 1800 to 30." REVISION "200812011304Z" -- December 01, 2008 at 13:04 GMT DESCRIPTION "02a96 Added objects to configure ip-mode and ping-interval for the sensor." REVISION "200811141441Z" -- November 14, 2008 at 14:41 GMT DESCRIPTION "02a95 Added wsCcRfApExtCountryCode." REVISION "200811101813Z" -- November 10, 2008 at 18:13 GMT DESCRIPTION "02a94 Added wsCcRfApIfInThroughput and wsCcRfApIfOutThroughput." REVISION "200811061304Z" -- November 06, 2008 at 13:04 GMT DESCRIPTION "02a93 Added wsCcRfApManufacturer." REVISION "200810301534Z" -- October 30, 2008 at 15:34 GMT DESCRIPTION "02a92 Added wsCcRfApIfTable." REVISION "200810241105Z" -- October 24, 2008 at 11:05 GMT DESCRIPTION "02a91 Added -1 value for wwCcRfMuAssocAclZone field." REVISION "200810231137Z" -- October 23, 2008 at 11:37 GMT DESCRIPTION "02a90 Reversed the indexes for wsCcRfMuVoiceCallTable." REVISION "200810231035Z" -- October 23, 2008 at 10:35 GMT DESCRIPTION "02a89 Added UNITS for wsCcRfMuVoiceCallStartTime." REVISION "200810221920Z" -- October 22, 2008 at 19:20 GMT DESCRIPTION "02a88 Added MU mac and call start time in wsCcRfMuVoiceCallTable." REVISION "200810211431Z" -- October 21, 2008 at 14:31 GMT DESCRIPTION "02a87 Corrected the range of wsCcRfRapContainmentInterval." REVISION "200810031118Z" -- October 03, 2008 at 11:18 GMT DESCRIPTION "02a86 Added the column wsCcRfMuAssocAclZone in wsCcRfMuAssocAclTable." REVISION "200809251328Z" -- September 25, 2008 at 13:28 GMT DESCRIPTION "02a85 Added the objects wsCcRfRadioState, wsCcRfSmartRadioCurrChannel, and wsCcRfSmartRadioCurrPower." REVISION "200809191631Z" -- September 19, 2008 at 16:31 GMT DESCRIPTION "02a84 Added the object wsCcRfSmartCalibrationStatusMessage to provide current status of calibration on the member switch. " REVISION "200809101614Z" -- September 10, 2008 at 16:14 GMT DESCRIPTION "02a83 Added the object wsCcRfSmartRadioSwichIpAddr in wsCcRfSmartRadioTable." REVISION "200809091310Z" -- September 09, 2008 at 13:10 GMT DESCRIPTION "02a82 Added objects for SIP ALG and Call Admission Control." REVISION "200808251314Z" -- August 25, 2008 at 13:14 GMT DESCRIPTION "02a81 Added the object wsCcRfSensorRevertSensorLastHeard." REVISION "200808221124Z" -- August 22, 2008 at 11:24 GMT DESCRIPTION "02a80 Added the object wsCcRfMuLockOutNow." REVISION "200808221014Z" -- August 22, 2008 at 10:14 GMT DESCRIPTION "02a79 Added wsCcRfSensorRevertVlan to configure vlans where sensors are to be discovered." REVISION "200808121629Z" -- August 12, 2008 at 16:29 GMT DESCRIPTION "02a78 Removed the unused object wsCcRfRadioDefaultCovRate. Added the object wsCcRfRadioLedMode to help locate an AP." REVISION "200808081610Z" -- August 08, 2008 at 16:10 GMT DESCRIPTION "02a77 Added MCS 0 through 15 to TransmitRate." REVISION "200808011213Z" -- August 01, 2008 at 12:13 GMT DESCRIPTION "02a76 Added objects for Adaptive APN (AP7131 and AP7181). Updated description of wsCcRfApVoiceDelay. Added the object wsCcRfWlanAuthEapRadiusDynamicAuthEnable." REVISION "200807301739Z" -- July 30, 2008 at 17:39 GMT DESCRIPTION "02a75 Added three more smart-rf related objects." REVISION "200807241832Z" -- July 24, 2008 at 18:32 GMT DESCRIPTION "02a74 Added Voice Statistics objects." REVISION "200807211744Z" -- July 21, 2008 at 17:44 GMT DESCRIPTION "02a73 Added an entry MaxRetries(6) in the WlanWmmConfig" REVISION "200807111025Z" -- July 11, 2008 at 10:25 GMT DESCRIPTION "02a72 Added an entry sensor(5) in the list of wsCcRfRadioStatusState" REVISION "200807081744Z" -- July 08, 2008 at 17:44 GMT DESCRIPTION "02a71 Modified the range of wsCcRfMuRateLimitingUp and wsCcRfMuRateLimitingDown from (0..100000) to (0 | 100..100000)." REVISION "200807031039Z" -- July 03, 2008 at 10:39 GMT DESCRIPTION "02a70 Changed the max-access for wsCcRfSmartIsClusterMaster and wsCcRfSmartMasterSwitchAddr to read-only, since they are not configurable under wireless config. Added wsCcRfSmartRadioNeighborMac." REVISION "200807011036Z" -- July 01, 2008 at 10:36 GMT DESCRIPTION "02a69 Renamed wsCcRfSensorRevert to wsCcRfSensor. Created wsCcRfSensorRevert under wsCcRfSensor. Moved all existing OIDs under wsCcRfSensorRevert to under the new OID for wsCcRfSensorRevert. Added new node wsCcRfSensorCfg under wsCcRfSensor. Under wsCcRfSensorCfg added wsCcRfSensorCfgWipsServerPrimaryIp and wsCcRfSensorCfgWipsServerSecondaryIp." REVISION "200806251524Z" -- June 25, 2008 at 15:24 GMT DESCRIPTION "02a68 Replaced wsCcRfSmartPowerRange with wsCcRfSmartPowerRangeLowerBound and wsCcRfSmartPowerRangeHigherBound Added two tables for user-selectable channel feature." REVISION "200806251458Z" -- June 25, 2008 at 14:58 GMT DESCRIPTION "02a67 Added the OID wsCcRfRadioWipsTable for AAP WIPS sensor support in wsCcRfRadio " REVISION "200806241959Z" -- June 24, 2008 at 19:59 GMT DESCRIPTION "02a66 Added an OID for max roamed devices in wsCcRfRadioAdmissionControlTable and wsCcRfRadioDefaultAdmissionControlTable." REVISION "200806191722Z" -- June 19, 2008 at 17:22 GMT DESCRIPTION "02a65 Added some for smart RF scalars, one global ccRf scalar and the smart RF neighbor table." REVISION "200806191456Z" -- June 19, 2008 at 14:56 GMT DESCRIPTION "02a64 Added new table for Admission Control statistics." REVISION "200806171357Z" -- June 17, 2008 at 13:57 GMT DESCRIPTION "02a63 Added three new scalars for wsCcRfSmart" REVISION "200806091814Z" -- June 09, 2008 at 18:14 GMT DESCRIPTION "02a62 Added objects for secure WISP-e." REVISION "200806061519Z" -- June 06, 2008 at 15:19 GMT DESCRIPTION "02a61 Modified the description of wsCcRfApAapImgEnableAutoUpd to explain allowed behaviour." REVISION "200806021201Z" -- June 02, 2008 at 12:01 GMT DESCRIPTION "02a60 Re-organized OIDs for TSPEC Admission Control." REVISION "200805301109Z" -- May 30, 2008 at 11:09 GMT DESCRIPTION "02a59 Added Smart-RF Management OIDs." REVISION "200805271507Z" -- May 27, 2008 at 15:07 GMT DESCRIPTION "02a58 Added OIDs for TSPEC Admission Control." REVISION "200805271313Z" -- May 27, 2008 at 13:13 GMT DESCRIPTION "02a57 Corrected the MAX-ACCESS of wsCcRfMuLocationingPreferredIndex to read-only." REVISION "200805151155Z" -- May 15, 2008 at 11:55 GMT DESCRIPTION "02a56 Added Rogue AP Containment OIDs." REVISION "200805151155Z" -- May 15, 2008 at 11:55 GMT DESCRIPTION "02a55 Corrected the name of wsCcRfWlanAuthNACServerPort1 to wsCcRfWlanAuthEapNACServerPort1. Changed the type and range of each of wsCcRfWlanAuthEapNACServerPort1 and wsCcRfWlanAuthEapNACServerPort2 to INTEGER and 1024-65535, respectively" REVISION "200804221108Z" -- April 22, 2008 at 11:08 GMT DESCRIPTION "02a54 Deprecate the value switchToWired(3) of wsCcRfWlanMuToMu. Using switchToWired(3) is identical in behavior to the value allow(2)." REVISION "200804161211Z" -- April 16, 2008 at 12:11 GMT DESCRIPTION "02a53 Added three new enums to IdsViolationType" REVISION "200804161220Z" -- April 16, 2008 at 12:20 GMT DESCRIPTION "02a52 Added Simultaneous Users support in Hotspot table" REVISION "200804111159Z" -- April 11, 2008 at 11:59 GMT DESCRIPTION "02a51 Added wsCcRfHotspotRedirectToHostName to enable or disable the use of hostname/System-Name in the redirection URL instead of the IP address of the switch." REVISION "200804031401Z" -- April 03, 2008 at 14:01 GMT DESCRIPTION "02a50 Added the following MIB objects for AP-5131 firmware update: - wsCcRfApImgUploadTable - wsCcRfApImgUploadLastFailedReason - wsCcRfApAapImg and sub-objects" REVISION "200804031355Z" -- April 03, 2008 at 13:55 GMT DESCRIPTION "02a49 Added MIB Items wsCcRfHotspotLogoutOnClose and wsCcRfHotspotMaxLoginAttempts to the wsCcRfHotspotTable." REVISION "200712191854Z" -- December 19, 2007 at 18:54 GMT DESCRIPTION "02a48 Redefined wsCcRfApExtTable by indexing it with new column wsCcRfApExtApMac." REVISION "200712071031Z" -- December 07, 2007 at 10:31 GMT DESCRIPTION "02a47 In wsCcRfMuLoadBalancingMethod, changed the enumerated name byThreshold to byThroughput." REVISION "200711191529Z" -- November 19, 2007 at 15:29 GMT DESCRIPTION "02a46 Bumped up max link timeout for client bridge to 200 seconds." REVISION "200711071250Z" -- November 07, 2007 at 12:50 GMT DESCRIPTION "02a45 Modified the value range of wsCcRfRadioGroupId." REVISION "200711021147Z" -- November 02, 2007 at 11:47 GMT DESCRIPTION "02a44 Removed wsCcRfRadioMeshWlan as it is no longer needed for AAP config." REVISION "200710301741Z" -- October 30, 2007 at 17:41 GMT DESCRIPTION "02a43 Changes for AAP configuration." REVISION "200710301223Z" -- October 30, 2007 at 12:23 GMT DESCRIPTION "02a42 Corrected the type for rate-limiting objects." REVISION "200710231620Z" -- October 23, 2007 at 16:20 GMT DESCRIPTION "02a41 Added wsCcRfWlanHoldTime." REVISION "200710181602Z" -- October 18, 2007 at 16:02 GMT DESCRIPTION "02a40 Added wsCcRfHotspotMode and deleted wsCcRfHotspotCustomerTag." REVISION "200710151133Z" -- October 15, 2007 at 11:33 GMT DESCRIPTION "02a39 Fixed the indexing of wsCcRfRadioGroupTable so that it can show multiple radios per group." REVISION "200710091810Z" -- October 09, 2007 at 18:10 GMT DESCRIPTION "02a38 Added objects for rate-limiting,load balancing and hotspot external login page tag." REVISION "200710041611Z" -- October 04, 2007 at 16:11 GMT DESCRIPTION "02a37 Removed violFilterAvgNoiseLevel from IdsViolationType enum. Deleted wsCcRfRadioMaxSipSessions and wsCcRfRadioStatusActiveSipSessions as they are not reqd." REVISION "200709261611Z" -- September 26, 2007 at 16:11 GMT DESCRIPTION "02a36 added wsCcRfRadioRssEnable" REVISION "200709261240Z" -- September 26, 2007 at 12:40 GMT DESCRIPTION "02a35 Added wsCcRfIdsBadEssidTable." REVISION "200709251240Z" -- September 25, 2007 at 12:40 GMT DESCRIPTION "02a34 Defined the range for wsCcRfWlanVlanUserLimit and updated its description to explain the different limits for different wireless switch platforms." REVISION "200709201517Z" -- September 20, 2007 at 15:17 GMT DESCRIPTION "02a33 added ap5181 to ApType" REVISION "200709171620Z" -- September 17, 2007 at 16:20 GMT DESCRIPTION "02a32 Renamed ApType 'hap5131' to 'ap5131'" REVISION "200709141255Z" -- September 14, 2007 at 12:55 GMT DESCRIPTION "02a31 Deprecated wsCcRfWlanVlan." REVISION "200709141048Z" -- September 14, 2007 at 10:48 GMT DESCRIPTION "02a30 Deprecated wsCcRfWlanGRETunnelIdx, wsCcRfWlanGRETunnelGatewayIp and wsCcRfWlanGRETunnelGatewayMask since WLAN over GRE feature is no longer supported." REVISION "200708291732Z" -- August 29, 2007 at 17:32 GMT DESCRIPTION "02a29 added wsCcRfWlanBwAllocationEnable and wsCcRfWlanQosWeight" REVISION "200708271649Z" -- August 27, 2007 at 16:49 GMT DESCRIPTION "02a28 Added wsCcRfRadioBridgeSsid and wsCcRfRadioBridgeLinkTimeout" REVISION "200708061319Z" -- August 06, 2007 at 13:19 GMT DESCRIPTION "02a27" REVISION "200708011526Z" -- August 01, 2007 at 15:26 GMT DESCRIPTION "added Hybrid AP related objects." REVISION "200707231838Z" -- July 23, 2007 at 18:38 GMT DESCRIPTION "added Multiple VLANs per WLAN feature MIB objects" REVISION "200704010926Z" -- April 01, 2007 at 09:26 GMT DESCRIPTION "02a24" REVISION "200701182043Z" -- January 18, 2007 at 20:43 GMT DESCRIPTION "02a23" REVISION "200701171750Z" -- January 17, 2007 at 17:50 GMT DESCRIPTION "02a22" REVISION "200701041207Z" -- January 04, 2007 at 12:07 GMT DESCRIPTION "02a21" REVISION "200610231605Z" -- October 23, 2006 at 16:05 GMT DESCRIPTION "02a20" REVISION "200610041540Z" -- October 04, 2006 at 15:40 GMT DESCRIPTION "02a19" REVISION "200609272348Z" -- September 27, 2006 at 23:48 GMT DESCRIPTION "02a18" REVISION "200609261100Z" -- September 26, 2006 at 11:00 GMT DESCRIPTION "02a17" REVISION "200609091137Z" -- September 09, 2006 at 11:37 GMT DESCRIPTION "02a16" REVISION "200609081710Z" -- September 08, 2006 at 17:10 GMT DESCRIPTION "02a15" REVISION "200609061104Z" -- September 06, 2006 at 11:04 GMT DESCRIPTION "02a14" REVISION "200609051650Z" -- September 05, 2006 at 16:50 GMT DESCRIPTION "02a13" REVISION "200607211004Z" -- July 21, 2006 at 10:04 GMT DESCRIPTION "02a12" REVISION "200607171856Z" -- July 17, 2006 at 18:56 GMT DESCRIPTION "02a11" REVISION "200607141646Z" -- July 14, 2006 at 16:46 GMT DESCRIPTION "02a10" REVISION "200607121602Z" -- July 12, 2006 at 16:02 GMT DESCRIPTION "02a09" REVISION "200606161144Z" -- June 16, 2006 at 11:44 GMT DESCRIPTION "02a08" REVISION "200606151520Z" -- June 15, 2006 at 15:20 GMT DESCRIPTION "02a07" REVISION "200606131309Z" -- June 13, 2006 at 13:09 GMT DESCRIPTION "02a06" REVISION "200606100850Z" -- June 10, 2006 at 08:50 GMT DESCRIPTION "02a05" REVISION "200606061431Z" -- June 06, 2006 at 14:31 GMT DESCRIPTION "02a04" REVISION "200605161226Z" -- May 16, 2006 at 12:26 GMT DESCRIPTION "02a03" REVISION "200605151137Z" -- May 15, 2006 at 11:37 GMT DESCRIPTION "02a02" REVISION "200604061244Z" -- April 06, 2006 at 12:44 GMT DESCRIPTION "02a01" REVISION "200601121604Z" -- January 12, 2006 at 16:04 GMT DESCRIPTION "01a51" ::= { wsCcRf 1 } -- -- Type definitions -- SinglePointer ::= INTEGER (0..255) AbbrevRowStatus ::= INTEGER { createAndGo(4), destroy(6) } DoActionShowProgress ::= INTEGER { doActionRightNow(1), idleState(2) } Password ::= OCTET STRING (SIZE (0..255)) StaticRowEnable ::= INTEGER { enable(1), disable(2) } ApType ::= INTEGER { ap100(1), ap200(2), ap300(3), ap4131(4), ap5131(5), ap5181(6), ap7131(7), ap7181(8), ap650(9) } RadioModel ::= INTEGER { ap100dot11B(1), ap200dot11A(2), ap200dot11B(3), ap300dot11A(4), ap300dot11BG(5) } RadioType ::= INTEGER { radio802dot11A(1), radio802dot11B(2), radio802dot11BG(3), radio802dot11FH(4), radio802dot11AN(5), radio802dot11BGN(6) } AuthType ::= INTEGER { authNone(1), auth802dot1xEap(2), authKerberos(3), authHotspot(4), authMac(5) } EncType ::= INTEGER { cryptoNone(1), cryptoWep64(2), cryptoWep128(3), cryptoKeyguardMcm(4), cryptoWpaWpa2Tkip(5), cryptoWpa2Ccmp(6), cryptoWep128Keyguard(7), cryptoTkipCcmp(8), cryptoWapi(9) } EncMap ::= BITS { cryptoNone(0), cryptoWep64(1), cryptoWep128(2), cryptoKeyguardMcm(3), cryptoWpaTkip(4), cryptoWpa2Ccmp(5), cryptoWapi(6) } AccCatType ::= INTEGER { acBestEffort(1), acBackground(2), acVideo(3), acVoice(4) } PassphraseType ::= INTEGER { ascii(1), hash(2) } RadioChannel ::= BITS { null(0), bchannel01(1), bchannel02(2), bchannel03(3), bchannel04(4), bchannel05(5), bchannel06(6), bchannel07(7), bchannel08(8), bchannel09(9), bchannel10(10), bchannel11(11), bchannel12(12), bchannel13(13), bchannel14(14), achannel34(15), achannel36(16), achannel38(17), achannel40(18), achannel42(19), achannel44(20), achannel46(21), achannel48(22), achannel52(23), achannel56(24), achannel60(25), achannel64(26), achannel149(27), achannel153(28), achannel157(29), achannel161(30), achannel165(31), achannel169(32) } TransmitRate ::= BITS { rate1Mb(0), rate2Mb(1), rate5pt5Mb(2), rate6Mb(3), rate9Mb(4), rate11Mb(5), rate12Mb(6), rate18Mb(7), rate22Mb(8), rate24Mb(9), rate36Mb(10), rate48Mb(11), rate54Mb(12), mcs0(13), mcs1(14), mcs2(15), mcs3(16), mcs4(17), mcs5(18), mcs6(19), mcs7(20), mcs8(21), mcs9(22), mcs10(23), mcs11(24), mcs12(25), mcs13(26), mcs14(27), mcs15(28) } IdsViolationType ::= INTEGER { violAggressiveScanning(1), violDosAssocOrAuthFlood(2), violDosUnicastDeauthOrDisassocFilterAgeout(3), violFailuresByAuthServers(4), violReplayInjectionAttack(5), viol80211ReplayCheckFailure(6), violDecryptionFailures(7), violFramesFromUnassocStations(8), violDosEapolStartStorm(9), violFuzzingAllZeroMac(10), violIdenticalSourceDestAddress(11), violTransmitDeviceWithInvalidMac(12), violCrackableWepivKey(13), violTkipMicCountermeasures(14), wiosFuzzingInvalidMgmtFrame(15), violEapNakFlood(16), violInvalid8021xFrames(17), violFuzzingInvalidFrameType(18), violApSsidBroadcastInBeacon(19), violFramesWithBadEssids(20), violUnencWiredLeakage(21), violNonChangeWepIv(22), violAdhocNetViolation(23), violDosBcastDeauth(24), violFuzzingInvalidSeqNum(25), violWipsAPDefaultConfig(26), violWipsExcessEapFlood(27), violWipsAPIDTheft(28), violWipsSuspiciousAP(29), violWipsAuthDeviceAdhocMode(30), violWipsFakeAPFlood(31), violWipsAdhocWithAuthSSID(32), violWipsUnauthAPWithAuthSSID(33) } TrafficIdentifier ::= INTEGER { bestEffort0(1), background1(2), background2(3), bestEffort3(4), video4(5), video5(6), voice6(7), voice7(8) } RfFunction ::= INTEGER { rffWLAN(1), rffWIPS(2), rffDisabled(3) } -- -- Textual conventions -- RadioWmmConfig ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Configuration parameter specification for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network. field octets contents range ----- ------ -------- ----- 1 1 Aifsn 1..15 2 2 CwMax 0..15 3 3 CwMin 0..15 4 4-5 TxOp 0..65535 ----------------------------------------------------------------------------------- | Aifsn (1 octet) | CwMax (1 octet) | CwMin (1 octet) | TxOp (2 octets) | ----------------------------------------------------------------------------------- All octets are in network byte order. Definition of contents: Aifsn: The Arbitration Inter-Frame Spacing is the wait time in milliSeconds between data frames. A smaller number leads to greater priority for medium access. CwMax: On each collision the AP or MU doubles its initial contention window wait time, until that number is as large as this maximum contention window size. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured. CwMin: If the medium is busy, or a transmitted frame collides, the AP or MU choose a random number between 0 and this minimum contention window size, to decide how long to wait before attempting (re)-transmission. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured. TxOp: An interval of time where an 802.11e station (MU/AP) has the right to initiate transmissions on the wireless medium. " SYNTAX OCTET STRING (SIZE (5)) WlanWmmConfig ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Configuration parameter specification for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network. field octets contents range ----- ------ -------- ----- 1 1 Aifsn 2..15 2 2 CwMax 0..15 3 3 CwMin 0..15 4 4-5 TxOp 0..65535 5 6 MaxRetries 0..15 ---------------------------------------------------------------------------------------------------------- | Aifsn (1 octet) | CwMax (1 octet) | CwMin (1 octet) | TxOp (2 octets) | MaxRetries (1 octet) | ---------------------------------------------------------------------------------------------------------- All octets are in network byte order. Definition of contents: Aifsn: The Arbitration Inter-Frame Spacing is the wait time in milliSeconds between data frames. A smaller number leads to greater priority for medium access. CwMax: On each collision the AP or MU doubles its initial contention window wait time, until that number is as large as this maximum contention window size. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured. CwMin: If the medium is busy, or a transmitted frame collides, the AP or MU choose a random number between 0 and this minimum contention window size, to decide how long to wait before attempting (re)-transmission. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured. TxOp: An interval of time where an 802.11e station (MU/AP) has the right to initiate transmissions on the wireless medium. MaxRetries: Set the Maximum number of retries for a particular wlan per access category." SYNTAX OCTET STRING (SIZE (6)) RadioAntennaGain ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The antenna gain of the antenna system attached to the radio, including cable gain if applicable. Please note that the unit is 0.1dBi." SYNTAX Unsigned32 (0..150) -- -- Node definitions -- -- 1.3.6.1.4.1.388.14.3.2.1.1 wsCcRfCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0 | 2)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value is a two-character representation of the country code. Note: when changing this _CountrySelection, the current channel and power levels are NOT changed. The prior settings for these values may or may not be valid/legal for the new country selected. It is up to the network management software to ensure that channel and/or power settings are changed BEFORE changing the country selection so that no such invalid/illegal state is reached, even for a short interim. country code: Argentina: ar Australia: au Austria: at Bahrain: bh Belarus: by Belgium: be Brazil: br Bulgaria: bg Canada: ca Chile: cl China: cn Colombia: co Costa Rica: cr Croatia: hr Czech Republic: cz Denmark: dk Ecuador: ec Egypt: eg Estonia: ee Finland: fi France: fr Germany: de Greece: gr Hong Kong: hk Hungary: hu Iceland: is India: in Indonesia: id Ireland: ie Israel: il Italy: it Japan(J52): jj Japan(W52/W53): jw Jordan: jo Kazakhstan: kz Kuwait: kw Latvia: lv Liechtenstein: li Lithuania: lt Luxembourg: lu Malaysia: my Mexico: mx Morocco: ma Netherlands: nl New Zealand: nz Norway: no Oman: om Peru: pe Philippines: ph Poland: pl Portugal: pt Qatar: qa Romania: ro Russia: ru Saudi Arabia: sa Singapore: sg Slovak Republic: sk Slovenia: si South Africa: za South Korea: kr Spain: es Sri Lanka: lk Sweden: se Switzerland: ch Taiwan: tw Thailand: th Turkey: tr Ukraine: ua United Arab Emirates: ae United Kingdom: uk United States: us Uruguay: uy Venezuela: ve Vietnam: vn" ::= { wsCcRfMIB 1 } -- 1.3.6.1.4.1.388.14.3.2.1.2 wsCcRfSnmpSetDelay OBJECT-TYPE SYNTAX INTEGER { immediate(1), hold(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NOT Implemented in this release: this would cause any configuration change to be held in a cache until this variable is toggled again. It will be useful if we need to apply some changes in a batch-mode." ::= { wsCcRfMIB 2 } -- 1.3.6.1.4.1.388.14.3.2.1.3 wsCcRfClusterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The cluster index of the switch." ::= { wsCcRfMIB 3 } -- 1.3.6.1.4.1.388.14.3.2.1.4 wsCcRfProxyRespMuArpReq OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Causes the switch to respond to an ARP Request on behalf of an MU. Since a lot of traffic is ARP, this helps to save battery life on the MUs." ::= { wsCcRfMIB 4 } -- 1.3.6.1.4.1.388.14.3.2.1.5 wsCcRfOversizedFrameEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable over-sized frame." ::= { wsCcRfMIB 5 } -- 1.3.6.1.4.1.388.14.3.2.1.6 wsCcRfWlanPriorityEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use wlan priority weights to determine packet queueing order." ::= { wsCcRfMIB 6 } -- 1.3.6.1.4.1.388.14.3.2.1.7 wsCcRfAdvancedConfigEnable OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), forcedFalse(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Advanced-Config functionality on the switch. Disabling of Advanced-Config will fail when the current setting is not compatible with Auto-Config rules. If user wishes to force the disable action, he/she should use the forcedFalse option instead. Note: After setting with forcedFalse, the object will return false(2) on a snmp-get. " ::= { wsCcRfMIB 7 } -- 1.3.6.1.4.1.388.14.3.2.1.8 wsCcRfLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error string of the last failed attempt snmp set" ::= { wsCcRfMIB 8 } -- 1.3.6.1.4.1.388.14.3.2.1.9 wsCcRfAp OBJECT IDENTIFIER ::= { wsCcRfMIB 9 } -- 1.3.6.1.4.1.388.14.3.2.1.9.1 wsCcRfApCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Acess Ports adopted" ::= { wsCcRfAp 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2 wsCcRfApTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all Access Ports that contain at least one radio that has been adopted by this wireless switch" ::= { wsCcRfAp 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1 wsCcRfApEntry OBJECT-TYPE SYNTAX WsCcRfApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfApIndex } ::= { wsCcRfApTable 1 } WsCcRfApEntry ::= SEQUENCE { wsCcRfApIndex INTEGER, wsCcRfApNicMac PhysAddress, wsCcRfApModelNumber DisplayString, wsCcRfApSerialNumber DisplayString, wsCcRfApPcbRevision DisplayString, wsCcRfApBootLoaderRev DisplayString, wsCcRfApWispVersion DisplayString, wsCcRfApRuntimeFwVersion DisplayString, wsCcRfApNumRadios Unsigned32, wsCcRfApRadio1 Integer32, wsCcRfApRadio2 Integer32, wsCcRfApAddress IpAddress, wsCcRfApVoiceDelay Unsigned32, wsCcRfApRadio3 Integer32, wsCcRfApAdoptionMode INTEGER, wsCcRfApNumRadiosTotal Unsigned32, wsCcRfApUpCount Counter32, wsCcRfApDownCount Counter32, wsCcRfApId Integer32, wsCcRfApUpTime TimeTicks, wsCcRfApOnlineTime TimeTicks, wsCcRfApCurrBss Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.1 wsCcRfApIndex OBJECT-TYPE SYNTAX INTEGER (1..500) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Small, arbitrary integer index." ::= { wsCcRfApEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.2 wsCcRfApNicMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of this Access Port." ::= { wsCcRfApEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.3 wsCcRfApModelNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Model number of the Access Port." ::= { wsCcRfApEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.4 wsCcRfApSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number of this Access Port." ::= { wsCcRfApEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.5 wsCcRfApPcbRevision OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Revision of the printed circuit board for this Access Port." ::= { wsCcRfApEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.6 wsCcRfApBootLoaderRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Revision of the boot loader code in this Access Port." ::= { wsCcRfApEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.7 wsCcRfApWispVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the WISP (AP-switch) protocol implemented by this Access Port." ::= { wsCcRfApEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.8 wsCcRfApRuntimeFwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of run-time code on this Access Port." ::= { wsCcRfApEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.9 wsCcRfApNumRadios OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of radios implemented on this Access Port." ::= { wsCcRfApEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.10 wsCcRfApRadio1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the first radio. 0 will be returned if the radio is not adopted." ::= { wsCcRfApEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.11 wsCcRfApRadio2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the second radio. 0 will be returned if the radio is not adopted." ::= { wsCcRfApEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.12 wsCcRfApAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the L3 AP. This field is empty for L2 AP." ::= { wsCcRfApEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.13 wsCcRfApVoiceDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Delay to AP (round trip delay / 2) for voice packets in ms. A value of 0 for this object implies that round trip delay is unavailable." ::= { wsCcRfApEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.14 wsCcRfApRadio3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the third radio. 0 will be returned if the radio is not adopted." ::= { wsCcRfApEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.15 wsCcRfApAdoptionMode OBJECT-TYPE SYNTAX INTEGER { layer2(1), layer3(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The adoption mode of the AP. layer2 : Layer 2 adoption layer3 : Layer 3 adoption" ::= { wsCcRfApEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.16 wsCcRfApNumRadiosTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of radios attached on the Access Port. Depending on the power availability, some of the radios may not be available for adoption. wsCcRfApNumRadios gives the exact number of available radios." ::= { wsCcRfApEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.17 wsCcRfApUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a radio in this Access Port got adopted." ::= { wsCcRfApEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.18 wsCcRfApDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a radio in this Access Port got unadopted." ::= { wsCcRfApEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.19 wsCcRfApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfApEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.20 wsCcRfApUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the AP was last re-initialized." ::= { wsCcRfApEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.21 wsCcRfApOnlineTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) when at least a radio in the AP was adopted since re-initialization." ::= { wsCcRfApEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.9.2.1.22 wsCcRfApCurrBss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of 802.11 BSSIDs assigned to radios in this AP." ::= { wsCcRfApEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3 wsCcRfApImageVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApImageVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table displaying Access Ports image version info." ::= { wsCcRfAp 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1 wsCcRfApImageVersionEntry OBJECT-TYPE SYNTAX WsCcRfApImageVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfApImageVersionIndex } ::= { wsCcRfApImageVersionTable 1 } WsCcRfApImageVersionEntry ::= SEQUENCE { wsCcRfApImageVersionIndex Integer32, wsCcRfApImageVersionApType ApType, wsCcRfApImageVersionModel DisplayString, wsCcRfApImageVersionName DisplayString, wsCcRfApImageVersionReleaseDate DisplayString, wsCcRfApImageVersionImageSize Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1.1 wsCcRfApImageVersionIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { wsCcRfApImageVersionEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1.2 wsCcRfApImageVersionApType OBJECT-TYPE SYNTAX ApType MAX-ACCESS read-only STATUS current DESCRIPTION "Ap type that the image applies to." ::= { wsCcRfApImageVersionEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1.3 wsCcRfApImageVersionModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Model string of the Access Port image." ::= { wsCcRfApImageVersionEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1.4 wsCcRfApImageVersionName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version name of the Access Port image." ::= { wsCcRfApImageVersionEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1.5 wsCcRfApImageVersionReleaseDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Release date of the Access Port image." ::= { wsCcRfApImageVersionEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.3.1.6 wsCcRfApImageVersionImageSize OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Size in bytes of the Access Port image." ::= { wsCcRfApImageVersionEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.4 wsCcRfApUnadoptedTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApUnadoptedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of detected but unadopted access ports. " ::= { wsCcRfAp 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.4.1 wsCcRfApUnadoptedEntry OBJECT-TYPE SYNTAX WsCcRfApUnadoptedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfApUnadoptedIndex } ::= { wsCcRfApUnadoptedTable 1 } WsCcRfApUnadoptedEntry ::= SEQUENCE { wsCcRfApUnadoptedIndex Integer32, wsCcRfApUnadoptedMac PhysAddress, wsCcRfApUnadoptedApType ApType, wsCcRfApUnadoptedLastSeen Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.9.4.1.1 wsCcRfApUnadoptedIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { wsCcRfApUnadoptedEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.4.1.2 wsCcRfApUnadoptedMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac address of detected but unadopted AP." ::= { wsCcRfApUnadoptedEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.4.1.3 wsCcRfApUnadoptedApType OBJECT-TYPE SYNTAX ApType MAX-ACCESS read-only STATUS current DESCRIPTION "Ap type of detected but unadopted access port." ::= { wsCcRfApUnadoptedEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.4.1.4 wsCcRfApUnadoptedLastSeen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unadopted-ap was last seen wsCcRfApUnadoptedLastSeen seconds ago." ::= { wsCcRfApUnadoptedEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5 wsCcRfApHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfAp 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1 wsCcRfApHistoryEntry OBJECT-TYPE SYNTAX WsCcRfApHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfApHistoryMac, wsCcRfApHistoryIndex } ::= { wsCcRfApHistoryTable 1 } WsCcRfApHistoryEntry ::= SEQUENCE { wsCcRfApHistoryIndex INTEGER, wsCcRfApHistoryMac PhysAddress, wsCcRfApHistoryRadioType INTEGER, wsCcRfApHistoryTimestamp DisplayString, wsCcRfApHistoryEvent INTEGER, wsCcRfApHistoryReason DisplayString } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1.1 wsCcRfApHistoryIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Simple Index" ::= { wsCcRfApHistoryEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1.2 wsCcRfApHistoryMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address of the AP" ::= { wsCcRfApHistoryEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1.3 wsCcRfApHistoryRadioType OBJECT-TYPE SYNTAX INTEGER { elevenA(1), elevenB(2), elevenG(3), na(4), elevenAN(5), elevenBGN(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Type: 11a, 11b, 11g, 11an, 11bgn or N/A" ::= { wsCcRfApHistoryEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1.4 wsCcRfApHistoryTimestamp OBJECT-TYPE SYNTAX DisplayString (SIZE (18..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Date and Time" ::= { wsCcRfApHistoryEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1.5 wsCcRfApHistoryEvent OBJECT-TYPE SYNTAX INTEGER { adoption(1), unadoption(2), selfHealing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Adoption/unadoption/self-healing event" ::= { wsCcRfApHistoryEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.5.1.6 wsCcRfApHistoryReason OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "AP History reason for occurence of event" ::= { wsCcRfApHistoryEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.6 wsCcRfApHistoryEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / disable AP history data collection" ::= { wsCcRfAp 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.7 wsCcRfApHistoryClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the entries in the AP History table." ::= { wsCcRfAp 7 } -- 1.3.6.1.4.1.388.14.3.2.1.9.8 wsCcRfApAapVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApAapVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the supported AAP firmware versions." ::= { wsCcRfAp 8 } -- 1.3.6.1.4.1.388.14.3.2.1.9.8.1 wsCcRfApAapVersionEntry OBJECT-TYPE SYNTAX WsCcRfApAapVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in AAP firmware version table." INDEX { wsCcRfApAapVersionType } ::= { wsCcRfApAapVersionTable 1 } WsCcRfApAapVersionEntry ::= SEQUENCE { wsCcRfApAapVersionType INTEGER, wsCcRfApAapVersionString DisplayString } -- 1.3.6.1.4.1.388.14.3.2.1.9.8.1.1 wsCcRfApAapVersionType OBJECT-TYPE SYNTAX INTEGER { ap5131(1), ap7131(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "AAP Type" ::= { wsCcRfApAapVersionEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.8.1.2 wsCcRfApAapVersionString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "AAP minimum firmware version required. The string should be of the format is X.X.X.X-XXXR." ::= { wsCcRfApAapVersionEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.9 wsCcRfApImgUploadTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApImgUploadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to upload new AP images." ::= { wsCcRfAp 9 } -- 1.3.6.1.4.1.388.14.3.2.1.9.9.1 wsCcRfApImgUploadEntry OBJECT-TYPE SYNTAX WsCcRfApImgUploadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfApImgUploadImgType } ::= { wsCcRfApImgUploadTable 1 } WsCcRfApImgUploadEntry ::= SEQUENCE { wsCcRfApImgUploadImgType INTEGER, wsCcRfApImgUploadFile DisplayString, wsCcRfApImgUploadRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.9.9.1.1 wsCcRfApImgUploadImgType OBJECT-TYPE SYNTAX INTEGER { ap300Wisp(1), ap300Wispe(2), ap300IpsSensor(3), ap100(4), ap4131(5), ap4131Revert(6), ap5131(7), ap7131(8), ap650(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Image type." ::= { wsCcRfApImgUploadEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.9.1.2 wsCcRfApImgUploadFile OBJECT-TYPE SYNTAX DisplayString (SIZE (1..99)) MAX-ACCESS read-create STATUS current DESCRIPTION "Image file path. It can be specified as one of the following: flash:/path/file cf:/path/file usb1:/path/file usb2:/path/file" ::= { wsCcRfApImgUploadEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.9.1.3 wsCcRfApImgUploadRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The Row status. All columns must be supplied to create a row. Row creation uploads the file to the Switch. If upload fails, row creation will fail and wsCcRfApImgUploadLastFailedReason will have the reason. Row deletion restores the original AP Image. In case AAP, the image is not uploaded to the switch. AAP image update will fetch the image from the specified location." ::= { wsCcRfApImgUploadEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.10 wsCcRfApImgUploadLastFailedReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Last image upload failed reason." ::= { wsCcRfAp 10 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11 wsCcRfApAapImg OBJECT IDENTIFIER ::= { wsCcRfAp 11 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.1 wsCcRfApAapImgEnableAutoUpd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable automatic image update of AAP. The value of this object can be set to 'true' even if no images have previously been configured in wsCcRfApImgUploadTable." ::= { wsCcRfApAapImg 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.2 wsCcRfApAapImgUpd OBJECT IDENTIFIER ::= { wsCcRfApAapImg 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.2.1 wsCcRfApAapImgUpdMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address of the AAP." ::= { wsCcRfApAapImgUpd 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.2.2 wsCcRfApAapImgUpdStart OBJECT-TYPE SYNTAX INTEGER { idle(1), imgUpdate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Image update start. Setting this value to 2 means starting image update. The following must be configured before setting this value to 2: - wsCcRfApAapImgUpdMac contains the MAC address of the AAP. - wsCcRfApImgUploadTable contains the AAP image name. If image update fails, wsCcRfApAapImgUpdLastFailedReason will have the reason. If there is no image update, its value will be set to 1." ::= { wsCcRfApAapImgUpd 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.2.3 wsCcRfApAapImgUpdLastFailedReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Last image update failed reason." ::= { wsCcRfApAapImgUpd 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.3.4 wsCcRfApAapImgUpdFilename OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "File name of Image update." ::= { wsCcRfApAapImgUpd 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.3.5 wsCcRfApAapImgUpdIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Server IP address to import the image." ::= { wsCcRfApAapImgUpd 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.3.6 wsCcRfApAapImgUpdLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Location or the path of image to be updated." ::= { wsCcRfApAapImgUpd 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.3.7 wsCcRfApAapImgUpdMode OBJECT-TYPE SYNTAX INTEGER { none(0), ftp(1), sftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "protocol to be used for image upgrade." ::= { wsCcRfApAapImgUpd 7 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.3.8 wsCcRfApAapImgUpdUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Username of the server for updating the image." ::= { wsCcRfApAapImgUpd 8 } -- 1.3.6.1.4.1.388.14.3.2.1.9.11.3.9 wsCcRfApAapImgUpdPassword OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Password of the server for updating the image." ::= { wsCcRfApAapImgUpd 9 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12 wsCcRfApIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists interface entries for Access Ports that contain at least one radio that has been adopted by this wireless switch. This table is an expansion table of wsCcRfApTable. Multiple row instances in this table correspond to a single row instance in wsCcRfApTable." ::= { wsCcRfAp 12 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1 wsCcRfApIfEntry OBJECT-TYPE SYNTAX WsCcRfApIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfApIndex, wsCcRfApIfIndex } ::= { wsCcRfApIfTable 1 } WsCcRfApIfEntry ::= SEQUENCE { wsCcRfApIfIndex INTEGER, wsCcRfApIfName DisplayString, wsCcRfApIfType INTEGER, wsCcRfApIfMtu Unsigned32, wsCcRfApIfSpeed Unsigned32, wsCcRfApIfLinkUpCount Counter32, wsCcRfApIfInThroughput Unsigned32, wsCcRfApIfOutThroughput Unsigned32, wsCcRfApIfApId Integer32, wsCcRfApIfInOctets Counter32, wsCcRfApIfInUcastPkts Counter32, wsCcRfApIfInNucastPkts Counter32, wsCcRfApIfInDiscards Counter32, wsCcRfApIfInErrors Counter32, wsCcRfApIfOutOctets Counter32, wsCcRfApIfOutUcastPkts Counter32, wsCcRfApIfOutNucastPkts Counter32, wsCcRfApIfOutDiscards Counter32, wsCcRfApIfOutErrors Counter32, wsCcRfApIfUpDownTimes Counter32 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.1 wsCcRfApIfIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface in the Access Port." ::= { wsCcRfApIfEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.2 wsCcRfApIfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface." ::= { wsCcRfApIfEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.3 wsCcRfApIfType OBJECT-TYPE SYNTAX INTEGER { other(1), ethernetCsmacd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface. other : A type other than those defined below ethernetCsmacd : Ethernet CSMA/CD" ::= { wsCcRfApIfEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.4 wsCcRfApIfMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The MTU of interface, specified in octets." ::= { wsCcRfApIfEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.5 wsCcRfApIfSpeed OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of Mbps." ::= { wsCcRfApIfEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.6 wsCcRfApIfLinkUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the link state changed to up." ::= { wsCcRfApIfEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.7 wsCcRfApIfInThroughput OBJECT-TYPE SYNTAX Unsigned32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Receive throughput of the interface." ::= { wsCcRfApIfEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.8 wsCcRfApIfOutThroughput OBJECT-TYPE SYNTAX Unsigned32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit throughput of the interface." ::= { wsCcRfApIfEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.9 wsCcRfApIfApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfApIfEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.10 wsCcRfApIfInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { wsCcRfApIfEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.11 wsCcRfApIfInUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unicast packets delivered to a higher-layer protocol." ::= { wsCcRfApIfEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.12 wsCcRfApIfInNucastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast packets delivered to a higher-layer protocol." ::= { wsCcRfApIfEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.13 wsCcRfApIfInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol." ::= { wsCcRfApIfEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.14 wsCcRfApIfInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { wsCcRfApIfEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.15 wsCcRfApIfOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { wsCcRfApIfEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.16 wsCcRfApIfOutUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested to be transmitted to a unicast address, including those that were discarded or not sent." ::= { wsCcRfApIfEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.17 wsCcRfApIfOutNucastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested to be transmitted to a non-unicast address, including those that were discarded or not sent." ::= { wsCcRfApIfEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.18 wsCcRfApIfOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted." ::= { wsCcRfApIfEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.19 wsCcRfApIfOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { wsCcRfApIfEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.9.12.1.20 wsCcRfApIfUpDownTimes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the link state changed state." ::= { wsCcRfApIfEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.9.13 wsCcRfApManufacturer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer of the access port." ::= { wsCcRfAp 13 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14 wsCcRfApResStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApResStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the resource status objects applicable to Access Ports that contain at least one radio that has been adopted by this wireless switch. A row in this table is an extension of a row in wsCcRfApTable with the relationship being one-to-one." ::= { wsCcRfAp 14 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1 wsCcRfApResStatusEntry OBJECT-TYPE SYNTAX WsCcRfApResStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." AUGMENTS { wsCcRfApEntry } ::= { wsCcRfApResStatusTable 1 } WsCcRfApResStatusEntry ::= SEQUENCE { wsCcRfApResStatusMemorySize Unsigned32, wsCcRfApResStatusMemoryFree Unsigned32, wsCcRfApResStatusFlashSize Unsigned32, wsCcRfApResStatusFlashFree Unsigned32, wsCcRfApResStatusCpuLoad Unsigned32, wsCcRfApResStatusMemoryType DisplayString, wsCcRfApResStatusFlashType DisplayString, wsCcRfApResStatusCpuType DisplayString, wsCcRfApResStatusPeakMemoryFree Unsigned32, wsCcRfApResStatusAvgMemoryFree Unsigned32, wsCcRfApResStatusPeakCpuLoad Unsigned32, wsCcRfApResStatusAvgCpuLoad Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.1 wsCcRfApResStatusMemorySize OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Size of memory." ::= { wsCcRfApResStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.2 wsCcRfApResStatusMemoryFree OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 %" MAX-ACCESS read-only STATUS current DESCRIPTION "Free memory currently available." ::= { wsCcRfApResStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.3 wsCcRfApResStatusFlashSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Size of flash." ::= { wsCcRfApResStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.4 wsCcRfApResStatusFlashFree OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Free flash currently available." ::= { wsCcRfApResStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.5 wsCcRfApResStatusCpuLoad OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "0.1%" MAX-ACCESS read-only STATUS current DESCRIPTION "Current CPU load, in tenths of a percent." ::= { wsCcRfApResStatusEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.6 wsCcRfApResStatusMemoryType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Memory type" ::= { wsCcRfApResStatusEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.7 wsCcRfApResStatusFlashType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Flash type" ::= { wsCcRfApResStatusEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.8 wsCcRfApResStatusCpuType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CPU type" ::= { wsCcRfApResStatusEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.9 wsCcRfApResStatusPeakMemoryFree OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1%" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum free memory that was available." ::= { wsCcRfApResStatusEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.10 wsCcRfApResStatusAvgMemoryFree OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1%" MAX-ACCESS read-only STATUS current DESCRIPTION "Average free memory available." ::= { wsCcRfApResStatusEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.11 wsCcRfApResStatusPeakCpuLoad OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "0.1%" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum CPU load." ::= { wsCcRfApResStatusEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.9.14.1.12 wsCcRfApResStatusAvgCpuLoad OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "0.1%" MAX-ACCESS read-only STATUS current DESCRIPTION "Average CPU load." ::= { wsCcRfApResStatusEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.9.15 wsCcRfApLldp OBJECT IDENTIFIER ::= { wsCcRfAp 15 } -- 1.3.6.1.4.1.388.14.3.2.1.9.15.1 wsCcRfApLldpAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively desired status of the local LLDP agent. If the associated wsCcRfApLldpAdminStatus object has a value of 'enabled(1)', then LLDP agent will transmit LLDP frames. If the associated wsCcRfApLldpAdminStatus object has a value of 'disabled(2)', then LLDP agent will not transmit LLDP frame." REFERENCE "IEEE Std 802.1AB-2005" DEFVAL { true } ::= {wsCcRfApLldp 1} -- 1.3.6.1.4.1.388.14.3.2.1.9.15.2 wsCcRfApLldpTxInterval OBJECT-TYPE SYNTAX Integer32 (30..32768) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which LLDP frames is transmitted on behalf of this LLDP agent. The default value for wsCcRfApLldpTxInterval object is 30 seconds." REFERENCE "IEEE Std 802.1AB-2005" DEFVAL { 30 } ::= {wsCcRfApLldp 2} -- 1.3.6.1.4.1.388.14.3.2.1.9.15.3 wsCcRfApLldpTxHoldMultiplier OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The time-to-live value is expressed as a multiple of the wsCcRfApLldpTxHoldMultiplier object. The actual time-to-live value used in LLDP frames transmitted on behalf of this LLDP agent is expressed by the following formula: TTL = min(65535, (apLldpTxInterval * wsCcRfApLldpTxHoldMultiplier)). For example, if the value of apLldpTxInterval is '30', and the value of wsCcRfApLldpTxHoldMultiplier is '4', then the value '120' is encoded in the TTL field of the LLDP header. The default value for wsCcRfApLldpTxHoldMultiplier object is 4." REFERENCE "IEEE Std 802.1AB-2005" DEFVAL { 4 } ::= {wsCcRfApLldp 3} -- 1.3.6.1.4.1.388.14.3.2.1.11 wsCcRfRadio OBJECT IDENTIFIER ::= { wsCcRfMIB 11 } -- 1.3.6.1.4.1.388.14.3.2.1.11.1 wsCcRfRadioAutoAdopt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the switch to auto-adopt radios. " ::= { wsCcRfRadio 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.2 wsCcRfRadioCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of radios adopted by the switch. This is a count of the number of rows in wsCcRfRadioStatusTable" ::= { wsCcRfRadio 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.3 wsCcRfRadioLastMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar records the MAC address of the most recent radio to be Adopted, UnAdopted, or Denied." ::= { wsCcRfRadio 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.4 wsCcRfRadioLastReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value notes the reason for the most-recent radio UnAdoption or Denial." ::= { wsCcRfRadio 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5 wsCcRfRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all radios adopted by this wireless switch. " ::= { wsCcRfRadio 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1 wsCcRfRadioEntry OBJECT-TYPE SYNTAX WsCcRfRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioTable 1 } WsCcRfRadioEntry ::= SEQUENCE { wsCcRfRadioIndex Integer32, wsCcRfRadioApMac PhysAddress, wsCcRfRadioDescr DisplayString, wsCcRfRadioType RadioType, wsCcRfRadioApType ApType, wsCcRfRadioBssWlanMap OCTET STRING, wsCcRfRadioAntDiversity INTEGER, wsCcRfRadioShortPreamble TruthValue, wsCcRfRadioRtsThresh Integer32, wsCcRfRadioBeaconInt Integer32, wsCcRfRadioDtimPrd Integer32, wsCcRfRadioBasicRates TransmitRate, wsCcRfRadioSupportedRates TransmitRate, wsCcRfRadioRapDetector TruthValue, wsCcRfRadioClusterIndex Unsigned32, wsCcRfRadioMaxMu Unsigned32, wsCcRfRadioSelfHealingAction INTEGER, wsCcRfRadioSelfHealingPwrOffset Unsigned32, wsCcRfRadioRunAcsNow DoActionNow, wsCcRfRadioResetParentAp DoActionNow, wsCcRfRadioReset DoActionNow, wsCcRfRadioRowStatus RowStatus, wsCcRfRadioCcaLevel INTEGER, wsCcRfRadioCcaMode INTEGER, wsCcRfRadioRapSingleChannelScan TruthValue, wsCcRfRadioBssDtim OCTET STRING, wsCcRfRadioCfgMethod INTEGER, wsCcRfRadioMuLocationingEnable TruthValue, wsCcRfRadioRogueApLocationingEnable TruthValue, wsCcRfRadioRssEnable TruthValue, wsCcRfRadioGroupId INTEGER, wsCcRfRadioLedMode INTEGER, wsCcRfRadioState INTEGER, wsCcRfRadio11bRatesEnable TruthValue, wsCcRfRadioFragmentationThresh Unsigned32, wsCcRfRadioWapiMode BITS, wsCcRfRadioApId Integer32, wsCcRfRadioRfEnable TruthValue, wsCcRfRadioPwrAttenuation Unsigned32, wsCcRfRadioShortRetryLimit INTEGER, wsCcRfRadioLongRetryLimit INTEGER, wsCcRfRadioMaxRxLifetime Unsigned32, wsCcRfRadioMode Integer32, wsCcRfRadioAntennaGain RadioAntennaGain, wsCcRfRadioNumber INTEGER, wsCcRfRadioDynamicChainSelEnable TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.1 wsCcRfRadioIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Small, arbitrary integer index." ::= { wsCcRfRadioEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.2 wsCcRfRadioApMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "MAC address of the Access Port that this radio resides within." DEFVAL { 'FFFFFFFFFFFF'h } ::= { wsCcRfRadioEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.3 wsCcRfRadioDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Description of the radio." DEFVAL { "" } ::= { wsCcRfRadioEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.4 wsCcRfRadioType OBJECT-TYPE SYNTAX RadioType MAX-ACCESS read-create STATUS current DESCRIPTION "Radio model. Changing this value will result in all parameters getting defaulted for this radio." DEFVAL { radio802dot11BG } ::= { wsCcRfRadioEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.5 wsCcRfRadioApType OBJECT-TYPE SYNTAX ApType MAX-ACCESS read-create STATUS current DESCRIPTION "Model of the Access Port this radio resides in." DEFVAL { ap300 } ::= { wsCcRfRadioEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.6 wsCcRfRadioBssWlanMap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The mapping of WLANs to BSSIDs. Each radio supports 4 BSSIDs and 16 WLANs. The user can map any number of WLANs to each of the BSSIDs. Each BSSID forms a virtual ap. " DEFVAL { '00'h } ::= { wsCcRfRadioEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.7 wsCcRfRadioAntDiversity OBJECT-TYPE SYNTAX INTEGER { fullDiversity(1), primaryOnly(2), secondaryOnly(3), mimo(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The antenna diversity setting for the Access Port. Options for 11n radio: - Valid options are primaryOnly and mimo - Default option is mimo - For single antenna operation set mode to primaryOnly" DEFVAL { 1 } ::= { wsCcRfRadioEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.8 wsCcRfRadioShortPreamble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable support for Short Preamble when MUs associate with the Access Port. Enabling Short Preamble may cause incompatibility with some older clients. The preamble length is 96 micro seconds for short and 192 micro seconds for long. Applies only to b/g radios." DEFVAL { 1 } ::= { wsCcRfRadioEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.9 wsCcRfRadioRtsThresh OBJECT-TYPE SYNTAX Integer32 (0..2346) MAX-ACCESS read-create STATUS current DESCRIPTION "The Request To Send(RTS) threshold(in bytes) for use by this radio." DEFVAL { 2300 } ::= { wsCcRfRadioEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.10 wsCcRfRadioBeaconInt OBJECT-TYPE SYNTAX Integer32 (50..200) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (wsCcRfRadioDtimPrd) value, for example, 100 : 10. " DEFVAL { 100 } ::= { wsCcRfRadioEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.11 wsCcRfRadioDtimPrd OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. " DEFVAL { 10 } ::= { wsCcRfRadioEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.12 wsCcRfRadioBasicRates OBJECT-TYPE SYNTAX TransmitRate MAX-ACCESS read-create STATUS current DESCRIPTION "List of basic rates for the radio." DEFVAL { { rate1Mb, rate2Mb, rate5pt5Mb, rate11Mb } } ::= { wsCcRfRadioEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.13 wsCcRfRadioSupportedRates OBJECT-TYPE SYNTAX TransmitRate MAX-ACCESS read-create STATUS current DESCRIPTION "List of supported rates for the radio." DEFVAL { { rate1Mb, rate2Mb, rate5pt5Mb, rate6Mb, rate9Mb, rate11Mb, rate12Mb, rate18Mb, rate24Mb, rate36Mb, rate48Mb, rate54Mb } } ::= { wsCcRfRadioEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.14 wsCcRfRadioRapDetector OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this radio is a Rogue AP detector." DEFVAL { 1 } ::= { wsCcRfRadioEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.15 wsCcRfRadioClusterIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The preferred group of Cluster" ::= { wsCcRfRadioEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.16 wsCcRfRadioMaxMu OBJECT-TYPE SYNTAX Unsigned32 (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "Max number of Mu a radio can associate." DEFVAL { 32 } ::= { wsCcRfRadioEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.17 wsCcRfRadioSelfHealingAction OBJECT-TYPE SYNTAX INTEGER { none(1), both(2), raisePower(3), openRates(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Action taken by this radio when neighbor radios go down" DEFVAL { none } ::= { wsCcRfRadioEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.18 wsCcRfRadioSelfHealingPwrOffset OBJECT-TYPE SYNTAX Unsigned32 (0..30) MAX-ACCESS read-create STATUS current DESCRIPTION "Self-healing power offset for this radio" ::= { wsCcRfRadioEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.19 wsCcRfRadioRunAcsNow OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-create STATUS current DESCRIPTION "Set wsCcRfRadioRunAcsNow to 1 to run Acs." DEFVAL { 2 } ::= { wsCcRfRadioEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.20 wsCcRfRadioResetParentAp OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-create STATUS current DESCRIPTION "Set wsCcRfRadioResetParentAp to 1 to reset the parent Access Port of this radio." DEFVAL { 2 } ::= { wsCcRfRadioEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.21 wsCcRfRadioReset OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-create STATUS current DESCRIPTION "Set wsCcRfRadioReset to 1 to reset the Radio." DEFVAL { 2 } ::= { wsCcRfRadioEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.22 wsCcRfRadioRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Rows status of the wsCcRfRadioTable" ::= { wsCcRfRadioEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.23 wsCcRfRadioCcaLevel OBJECT-TYPE SYNTAX INTEGER (1..31) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Description." DEFVAL { 1 } ::= { wsCcRfRadioEntry 23 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.24 wsCcRfRadioCcaMode OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Description." DEFVAL { 1 } ::= { wsCcRfRadioEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.25 wsCcRfRadioRapSingleChannelScan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable single-channel scan for Rogue AP." ::= { wsCcRfRadioEntry 25 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.26 wsCcRfRadioBssDtim OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Set DTIM per BSS. DTIM period is not configurable on a per BSS basis for AP71X1 11n radios. These radios use a single DTIM period across all BSS in a radio which can be configured in wsCcRfRadioDtimPrd." ::= { wsCcRfRadioEntry 26 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.27 wsCcRfRadioCfgMethod OBJECT-TYPE SYNTAX INTEGER { userConfigured(1), switchConfigured(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The radio can be configured by user before being adopted or by the switch while adoption" ::= { wsCcRfRadioEntry 27 } -- Enable/Disable MU locationing on this radio -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.28 wsCcRfRadioMuLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable MU locationing on this radio" DEFVAL { 2 } ::= { wsCcRfRadioEntry 28 } -- Enable/Disable rogue AP locationing on this radio -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.29 wsCcRfRadioRogueApLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable rogue AP locationing on this radio" DEFVAL { 2 } ::= { wsCcRfRadioEntry 29 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.31 wsCcRfRadioRssEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this object to True enables (False for disable) RSS (Remote Site Survivability) for this radio." ::= { wsCcRfRadioEntry 31 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.32 wsCcRfRadioGroupId OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The group id that this radio belongs to. This field is used for the load-balancing feature wherein radios are combined in groups and MUs are discouraged from association if it not coming from the least loaded radio in the group. Group id 0 is used to indicate that this radio does not belong to any group." ::= { wsCcRfRadioEntry 32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.33 wsCcRfRadioLedMode OBJECT-TYPE SYNTAX INTEGER { startFlashing(1), stopFlashing(2), idleState(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of the LEDs on the AP. The meanings of the values are: startFlashing - When the value startFlashing is written to this object, the parent AP of the radio begins flashing its LEDs to help locate it. stopFlashing- When the value stopFlashing is written to this object, the parent AP of the radio reverts its LEDs to normal mode of operation. idleState - When the value idleState is written to this object, no action is taken. When read, this object always returns the value idleState." DEFVAL { idleState } ::= { wsCcRfRadioEntry 33 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.34 wsCcRfRadioState OBJECT-TYPE SYNTAX INTEGER { unseen(1), unadopted(2), normal(3), detector(4), selfHealing(5), rescuing(6), filling(7), sensor(8), disabled(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the radio. unseen : Configured, but not connected unadopted : Connected, but not adopted normal : Adopted and working normal detector : Adopted and is working as a detector selfHealing : Legacy self-healing rescuing : Adopted and is rescuing to recover for neighbor filling : Adopted and is filling in to recover coverage hole sensor : Sensor disabled : The radio is disabled Note: The disabled or sensor radio is actually in the adopted state. It can be turned into a sensor or normal mode at any time by the switch. " ::= { wsCcRfRadioEntry 34 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.35 wsCcRfRadio11bRatesEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable support for 802.11b rates." DEFVAL { true } ::= { wsCcRfRadioEntry 35 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.36 wsCcRfRadioFragmentationThresh OBJECT-TYPE SYNTAX Unsigned32 (0 | 256..8000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The fragmentation threshold for use by this radio. 0 Disable fragmentation 256..8000 Fragmentation threshold in octets" DEFVAL { 0 } ::= { wsCcRfRadioEntry 36 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.37 wsCcRfRadioWapiMode OBJECT-TYPE SYNTAX BITS { dot11(0), wapi(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The WAPI mode of radio. dot11 : 802.11 wapi : WAPI" DEFVAL { { dot11, wapi } } ::= { wsCcRfRadioEntry 37 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.38 wsCcRfRadioApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfRadioEntry 38 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.39 wsCcRfRadioRfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the radio." DEFVAL { true } ::= { wsCcRfRadioEntry 39 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.40 wsCcRfRadioPwrAttenuation OBJECT-TYPE SYNTAX Unsigned32 (0..30) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The power attenuation." DEFVAL { 0 } ::= { wsCcRfRadioEntry 40 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.41 wsCcRfRadioShortRetryLimit OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of transmission attempts of a frame, for the packet less than or equal to RTS Threshold." DEFVAL { 7 } ::= { wsCcRfRadioEntry 41 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.42 wsCcRfRadioLongRetryLimit OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of transmission attempts of a frame, for the packet greater than RTS Threshold." DEFVAL { 4 } ::= { wsCcRfRadioEntry 42 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.43 wsCcRfRadioMaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The MaxReceiveLifetime." DEFVAL { 512 } ::= { wsCcRfRadioEntry 43 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.44 wsCcRfRadioMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Bit map for radio mode configured. Bit position: The Least Significant Bit corresponds to the first bit in the map. The next bit corresponds to the second bit and so on. Unused bits are ignored. bit position meaning ============ ======= 0 dot11a 1 dot11b 2 dot11g 3 dot11an 4 dot11gn Bit values: 1 - enabled 0 - disabled" ::= { wsCcRfRadioEntry 44 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.45 wsCcRfRadioAntennaGain OBJECT-TYPE SYNTAX RadioAntennaGain UNITS "0.1dBi" MAX-ACCESS read-create STATUS current DESCRIPTION "Antenna gain. Please see the definition of RadioAntennaGain for additional information." ::= { wsCcRfRadioEntry 45 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.46 wsCcRfRadioNumber OBJECT-TYPE SYNTAX INTEGER (0 | 1..3) MAX-ACCESS read-create STATUS current DESCRIPTION "The radio number inside AP. 0 Radio number is not set 1..3 Radio number inside AP Steps required for adding a third radio for an AP: - Add the first two radios as usual. - Set the radio numbers for those radios as 1 and 2. - Add the third radio. - Set the radio number of the radio added as 3." ::= { wsCcRfRadioEntry 46 } -- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.47 wsCcRfRadioDynamicChainSelEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable Dynamic chain select option." DEFVAL { false } ::= { wsCcRfRadioEntry 47 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6 wsCcRfRadioChannelPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioChannelPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Use wsCcRfRadioChannelPower table to view and set the channel/power/placement properties of the radios. The process can be broken down into the following steps: 1. Set wsCcRfRadioCpReset to TRUE. 2. Set wsCcRfRadioCpPlacement 3. Get wsCcRfRadioCpPosChannel 4. Set wsCcRfRadioCpDesChannel 5. Get wsCcRfRadioCpPosPowerLevel 6. Set wsCcRfRadioCpDesPowerLevel 7. Get wsCcRfRadioCpPowerInMW 8. Set wsCcRfRadioCp11nChannelWidth 9. Set wsCcRfRadioCp11nSecondaryChannel 10. Set wsCcRfRadioCpSet " ::= { wsCcRfRadio 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1 wsCcRfRadioChannelPowerEntry OBJECT-TYPE SYNTAX WsCcRfRadioChannelPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioChannelPowerTable 1 } WsCcRfRadioChannelPowerEntry ::= SEQUENCE { wsCcRfRadioCpPlacement INTEGER, wsCcRfRadioCpChannelMode INTEGER, wsCcRfRadioCpPosChannel MultiPointer64, wsCcRfRadioCpDesChannel Unsigned32, wsCcRfRadioCpPosPowerDb Integer32, wsCcRfRadioCpDesPowerDb Integer32, wsCcRfRadioCpDesPowerMw Integer32, wsCcRfRadioCpSet DoActionShowProgress, wsCcRfRadioCpReset DoActionShowProgress, wsCcRfRadioCpApId Integer32, wsCcRfRadioCpPowerMgmtEnable TruthValue, wsCcRfRadioCpAcsChnExceptions MultiPointer256 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.1 wsCcRfRadioCpPlacement OBJECT-TYPE SYNTAX INTEGER { indoor(1), outdoor(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The placement for radio." ::= { wsCcRfRadioChannelPowerEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.2 wsCcRfRadioCpChannelMode OBJECT-TYPE SYNTAX INTEGER { fixed(1), random(2), acs(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "fixed mode: apply user selected channel random mode: random channel selection acs mode: auto channel selection (radio will scan for the least congested channel at startup or reconfiguration)" ::= { wsCcRfRadioChannelPowerEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.3 wsCcRfRadioCpPosChannel OBJECT-TYPE SYNTAX MultiPointer64 MAX-ACCESS read-only STATUS current DESCRIPTION "The possible channels that can be set when placement = wsCcRfRadioCpPlacement." ::= { wsCcRfRadioChannelPowerEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.4 wsCcRfRadioCpDesChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The desired channel for radio." ::= { wsCcRfRadioChannelPowerEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.5 wsCcRfRadioCpPosPowerDb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max possible power level (dBm) that can be set when channel= wsCcRfRadioCpDesChannel." ::= { wsCcRfRadioChannelPowerEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.6 wsCcRfRadioCpDesPowerDb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The desired power level (dBm) for radio." ::= { wsCcRfRadioChannelPowerEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.7 wsCcRfRadioCpDesPowerMw OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "wsCcRfRadioCpDesPowerLevel in mW." ::= { wsCcRfRadioChannelPowerEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.8 wsCcRfRadioCpSet OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION "Validate values in wsCcRfRadioCpDes fields. If it is a valid combination, configure the switch with this combination and set wsCcRfRadioCp_ to these values." ::= { wsCcRfRadioChannelPowerEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.9 wsCcRfRadioCpReset OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the following OIDs. wsCcRfRadioCpDesPlacement wsCcRfRadioCpDesChannel wsCcRfRadioCpDesPowerLevel wsCcRfRadioCpPosChannel wsCcRfRadioCpPosPowerLevel wsCcRfRadioCpPowerInMW wsCcRfRadioCp11nChannelWidth wsCcRfRadioCp11nSecondaryChannel" ::= { wsCcRfRadioChannelPowerEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.10 wsCcRfRadioCpApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfRadioChannelPowerEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.11 wsCcRfRadioCpPowerMgmtEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable automatic power management." DEFVAL { true } ::= { wsCcRfRadioChannelPowerEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.11.6.1.12 wsCcRfRadioCpAcsChnExceptions OBJECT-TYPE SYNTAX MultiPointer256 MAX-ACCESS read-write STATUS current DESCRIPTION "The channels not scanned when channel mode is ACS." ::= { wsCcRfRadioChannelPowerEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.11.7 wsCcRfRadioWmmTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioWmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network" ::= { wsCcRfRadio 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.7.1 wsCcRfRadioWmmEntry OBJECT-TYPE SYNTAX WsCcRfRadioWmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioWmmTable 1 } WsCcRfRadioWmmEntry ::= SEQUENCE { wsCcRfRadioWmmBeParm RadioWmmConfig, wsCcRfRadioWmmBkParm RadioWmmConfig, wsCcRfRadioWmmViParm RadioWmmConfig, wsCcRfRadioWmmVoParm RadioWmmConfig } -- 1.3.6.1.4.1.388.14.3.2.1.11.7.1.1 wsCcRfRadioWmmBeParm OBJECT-TYPE SYNTAX RadioWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Best Effort QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfRadioWmmEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.7.1.2 wsCcRfRadioWmmBkParm OBJECT-TYPE SYNTAX RadioWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Background QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfRadioWmmEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.7.1.3 wsCcRfRadioWmmViParm OBJECT-TYPE SYNTAX RadioWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Video QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfRadioWmmEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.7.1.4 wsCcRfRadioWmmVoParm OBJECT-TYPE SYNTAX RadioWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Voice QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfRadioWmmEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8 wsCcRfRadioDefaultTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the default setting for all supported radio for this switch. Please refer to wsCcRfRadioTable for column descriptions." ::= { wsCcRfRadio 8 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1 wsCcRfRadioDefaultEntry OBJECT-TYPE SYNTAX WsCcRfRadioDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioDefaultIndex } ::= { wsCcRfRadioDefaultTable 1 } WsCcRfRadioDefaultEntry ::= SEQUENCE { wsCcRfRadioDefaultIndex Integer32, wsCcRfRadioDefaultType RadioType, wsCcRfRadioDefaultApType ApType, wsCcRfRadioDefaultBssWlanMap OCTET STRING, wsCcRfRadioDefaultAntDiversity INTEGER, wsCcRfRadioDefaultShortPreamble TruthValue, wsCcRfRadioDefaultRtsThresh Integer32, wsCcRfRadioDefaultBeaconInt Integer32, wsCcRfRadioDefaultDtimPrd Integer32, wsCcRfRadioDefaultBasicRates TransmitRate, wsCcRfRadioDefaultSupportedRates TransmitRate, wsCcRfRadioDefaultRapDetector TruthValue, wsCcRfRadioDefaultClusterIndex Unsigned32, wsCcRfRadioDefaultMaxMu Unsigned32, wsCcRfRadioDefaultSelfHealingAction INTEGER, wsCcRfRadioDefaultSelfHealingPwrOffset Unsigned32, wsCcRfRadioDefaultRapSingleChannelScan TruthValue, wsCcRfRadioDefaultBssDtim OCTET STRING, wsCcRfRadioDefaultMuLocationingEnable TruthValue, wsCcRfRadioDefaultRogueApLocationingEnable TruthValue, wsCcRfRadioDefaultAntGain RadioAntennaGain, wsCcRfRadioDefaultMaxPwrAttenuation Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.1 wsCcRfRadioDefaultIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.2 wsCcRfRadioDefaultType OBJECT-TYPE SYNTAX RadioType MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.3 wsCcRfRadioDefaultApType OBJECT-TYPE SYNTAX ApType MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.4 wsCcRfRadioDefaultBssWlanMap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.5 wsCcRfRadioDefaultAntDiversity OBJECT-TYPE SYNTAX INTEGER { fullDiversity(1), primaryOnly(2), secondaryOnly(3), mimo(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.6 wsCcRfRadioDefaultShortPreamble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.7 wsCcRfRadioDefaultRtsThresh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.8 wsCcRfRadioDefaultBeaconInt OBJECT-TYPE SYNTAX Integer32 (50..200) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.9 wsCcRfRadioDefaultDtimPrd OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.10 wsCcRfRadioDefaultBasicRates OBJECT-TYPE SYNTAX TransmitRate MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.11 wsCcRfRadioDefaultSupportedRates OBJECT-TYPE SYNTAX TransmitRate MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.12 wsCcRfRadioDefaultRapDetector OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.13 wsCcRfRadioDefaultClusterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.14 wsCcRfRadioDefaultMaxMu OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.15 wsCcRfRadioDefaultSelfHealingAction OBJECT-TYPE SYNTAX INTEGER { none(1), both(2), raisePower(3), openRates(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.16 wsCcRfRadioDefaultSelfHealingPwrOffset OBJECT-TYPE SYNTAX Unsigned32 (0..30) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.17 wsCcRfRadioDefaultRapSingleChannelScan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable single-channel scan for Rogue AP." ::= { wsCcRfRadioDefaultEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.18 wsCcRfRadioDefaultBssDtim OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Set DTIM per BSS. DTIM period is not configurable on a per BSS basis for AP71X1 11n radios. These radios use a single DTIM period across all BSS in a radio which can be configured in wsCcRfRadioDefaultDtimPrd." ::= { wsCcRfRadioDefaultEntry 18 } -- Enable MU locationing on this radio -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.19 wsCcRfRadioDefaultMuLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MU locationing on this radio" DEFVAL { 2 } ::= { wsCcRfRadioDefaultEntry 19 } -- Enable Rogue AP locationing on this radio -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.20 wsCcRfRadioDefaultRogueApLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Rogue AP locationing on this radio" DEFVAL { 2 } ::= { wsCcRfRadioDefaultEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.24 wsCcRfRadioDefaultAntGain OBJECT-TYPE SYNTAX RadioAntennaGain UNITS "0.1dBi" MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna gain. Please see the definition of RadioAntennaGain for additional information." ::= { wsCcRfRadioDefaultEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.11.8.1.25 wsCcRfRadioDefaultMaxPwrAttenuation OBJECT-TYPE SYNTAX Unsigned32 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum power attenuation." ::= { wsCcRfRadioDefaultEntry 25 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9 wsCcRfRadioDefaultChannelPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioDefaultChannelPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Use wsCcRfRadioDefaultChannelPower table to view and set the channel/power/placement properties of the default radio configurations. Please refer to the descriptions in wsCcRfRadioChannelPowerTable " ::= { wsCcRfRadio 9 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1 wsCcRfRadioDefaultChannelPowerEntry OBJECT-TYPE SYNTAX WsCcRfRadioDefaultChannelPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioDefaultIndex } ::= { wsCcRfRadioDefaultChannelPowerTable 1 } WsCcRfRadioDefaultChannelPowerEntry ::= SEQUENCE { wsCcRfRadioDefaultCpPlacement INTEGER, wsCcRfRadioDefaultCpChannelMode INTEGER, wsCcRfRadioDefaultCpPosChannel MultiPointer64, wsCcRfRadioDefaultCpDesChannel Unsigned32, wsCcRfRadioDefaultCpPosPowerDb Integer32, wsCcRfRadioDefaultCpDesPowerDb Integer32, wsCcRfRadioDefaultCpDesPowerMw Integer32, wsCcRfRadioDefaultCpSet DoActionShowProgress, wsCcRfRadioDefaultCpReset DoActionShowProgress } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.1 wsCcRfRadioDefaultCpPlacement OBJECT-TYPE SYNTAX INTEGER { indoor(1), outdoor(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.2 wsCcRfRadioDefaultCpChannelMode OBJECT-TYPE SYNTAX INTEGER { random(2), acs(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.3 wsCcRfRadioDefaultCpPosChannel OBJECT-TYPE SYNTAX MultiPointer64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.4 wsCcRfRadioDefaultCpDesChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.5 wsCcRfRadioDefaultCpPosPowerDb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.6 wsCcRfRadioDefaultCpDesPowerDb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.7 wsCcRfRadioDefaultCpDesPowerMw OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.8 wsCcRfRadioDefaultCpSet OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION " ." ::= { wsCcRfRadioDefaultChannelPowerEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.11.9.1.9 wsCcRfRadioDefaultCpReset OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { wsCcRfRadioDefaultChannelPowerEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10 wsCcRfRadioDefaultWmmTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioDefaultWmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network" ::= { wsCcRfRadio 10 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1 wsCcRfRadioDefaultWmmEntry OBJECT-TYPE SYNTAX WsCcRfRadioDefaultWmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioDefaultIndex, wsCcRfRadioDefaultWmmAccessCategory } ::= { wsCcRfRadioDefaultWmmTable 1 } WsCcRfRadioDefaultWmmEntry ::= SEQUENCE { wsCcRfRadioDefaultWmmAccessCategory INTEGER, wsCcRfRadioDefaultWmmAdmissionCtrl TruthValue, wsCcRfRadioDefaultWmmAifsn Unsigned32, wsCcRfRadioDefaultWmmTxOp Unsigned32, wsCcRfRadioDefaultWmmCwMin Unsigned32, wsCcRfRadioDefaultWmmCwMax Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1.1 wsCcRfRadioDefaultWmmAccessCategory OBJECT-TYPE SYNTAX INTEGER { acBestEffort(1), acBackground(2), acVideo(3), acVoice(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A label for a particular QoS category of traffic in an 802.11e network. WMM defines 4 Access Categories (Voice, Video, Best Effort, Background)." ::= { wsCcRfRadioDefaultWmmEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1.2 wsCcRfRadioDefaultWmmAdmissionCtrl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION " " ::= { wsCcRfRadioDefaultWmmEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1.3 wsCcRfRadioDefaultWmmAifsn OBJECT-TYPE SYNTAX Unsigned32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The Arbitration Inter-Frame Spacing is the wait time in milliSeconds between data frames. A smaller number leads to greater priority for medium access." ::= { wsCcRfRadioDefaultWmmEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1.4 wsCcRfRadioDefaultWmmTxOp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "millisecond" MAX-ACCESS read-write STATUS current DESCRIPTION "An interval of time where an 802.11e station (MU/AP) has the right to initiate transmissions on the wireless medium." ::= { wsCcRfRadioDefaultWmmEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1.5 wsCcRfRadioDefaultWmmCwMin OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "If the medium is busy, or a transmitted frame collides, the AP or MU choose a random number between 0 and this minimum contention window size, to decide how long to wait before attempting (re)-transmission. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured." ::= { wsCcRfRadioDefaultWmmEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.10.1.6 wsCcRfRadioDefaultWmmCwMax OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "On each collision the AP or MU doubles its initial contention window wait time, until that number is as large as this maximum contention window size. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured." ::= { wsCcRfRadioDefaultWmmEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11 wsCcRfRadioStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status of adopted radios." ::= { wsCcRfRadio 11 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1 wsCcRfRadioStatusEntry OBJECT-TYPE SYNTAX WsCcRfRadioStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioStatusTable 1 } WsCcRfRadioStatusEntry ::= SEQUENCE { wsCcRfRadioStatusRadioMac PhysAddress, wsCcRfRadioStatusState INTEGER, wsCcRfRadioStatusPtrToAp SinglePointer, wsCcRfRadioStatusMaxWlans Integer32, wsCcRfRadioStatusMaxBss Integer32, wsCcRfRadioStatusCurrChannel Unsigned32, wsCcRfRadioStatusCurrPowerDb Integer32, wsCcRfRadioStatusCurrPowerMw Integer32, wsCcRfRadioStatusAssociatedMus Integer32, wsCcRfRadioStatusLastAdoption TimeTicks, wsCcRfRadioStatusShortSlotTime Integer32, wsCcRfRadioStatusVlanTag Unsigned32, wsCcRfRadioStatusCfgMethod INTEGER, wsCcRfRadioStatusAssociatedVoiceMus Unsigned32, wsCcRfRadioStatusCurrWlans Integer32, wsCcRfRadioStatusApId Integer32, wsCcRfRadioStatusCurrBss Integer32, wsCcRfRadioStatusCurrSecondaryChannel Unsigned32, wsCcRfRadioStatusMtu Integer32, wsCcRfRadioStatusSpeed Unsigned32, wsCcRfRadioStatusLastChange TimeTicks, wsCcRfRadioStatusMode Integer32, wsCcRfRadioStatusUpdownTimes Counter32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.1 wsCcRfRadioStatusRadioMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Radio MAC address" ::= { wsCcRfRadioStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.2 wsCcRfRadioStatusState OBJECT-TYPE SYNTAX INTEGER { unadopted(1), normal(2), detector(3), selfHealing(4), sensor(5), disabled(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value describes the state of the radio. A healthy radio would power-on, and quickly advance from radioUpAndWaitingForConfig and then on to radioReceivingConfig and then on to radioUpAndAdopted. A radio that is denied adoption due to ACLs would show: radioDeniedAdoptionDueToAcl. A radio that does not 'handshake' with the switch properly would be found in state: radioBroken. A radio in an Adaptive AP may be disabled. The disabled state indicates the radio is switched off, even though it is adopted. Note: The disabled or sensor radio is actually in the adopted state. It can be turned into a sensor or normal mode at any time by the switch. " ::= { wsCcRfRadioStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.3 wsCcRfRadioStatusPtrToAp OBJECT-TYPE SYNTAX SinglePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the index in the ApTable for the entry representing the Access Port that contains this radio. Since each radio has one and only one Access Port as 'parent', this value is a simple integer, not a bit-mask." ::= { wsCcRfRadioStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.4 wsCcRfRadioStatusMaxWlans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the maximum number of 802.11 ESSIDs (wireless lans) supported by this radio" ::= { wsCcRfRadioStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.5 wsCcRfRadioStatusMaxBss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of 802.11 BSSIDs supported by this radio" ::= { wsCcRfRadioStatusEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.6 wsCcRfRadioStatusCurrChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "current channel (may be different from configured channel due to DFS etc)." ::= { wsCcRfRadioStatusEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.7 wsCcRfRadioStatusCurrPowerDb OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Output power level for the radio in Db. " ::= { wsCcRfRadioStatusEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.8 wsCcRfRadioStatusCurrPowerMw OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Output power level for the radio in Mw." ::= { wsCcRfRadioStatusEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.9 wsCcRfRadioStatusAssociatedMus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of associated MUs." ::= { wsCcRfRadioStatusEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.10 wsCcRfRadioStatusLastAdoption OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since radio adoption time" ::= { wsCcRfRadioStatusEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.11 wsCcRfRadioStatusShortSlotTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 802.11g short-slot time on the radio" ::= { wsCcRfRadioStatusEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.12 wsCcRfRadioStatusVlanTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN tag using which the switch is communicating with the radio" ::= { wsCcRfRadioStatusEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.13 wsCcRfRadioStatusCfgMethod OBJECT-TYPE SYNTAX INTEGER { userConfigured(1), switchConfigured(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The radio can be configured by user before being adopted or by the switch while adoption." ::= { wsCcRfRadioStatusEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.14 wsCcRfRadioStatusAssociatedVoiceMus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MUs identified as voice associated." ::= { wsCcRfRadioStatusEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.15 wsCcRfRadioStatusCurrWlans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of 802.11 ESSIDs (wireless LANs) assigned to this radio." ::= { wsCcRfRadioStatusEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.16 wsCcRfRadioStatusApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfRadioStatusEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.17 wsCcRfRadioStatusCurrBss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of 802.11 BSSIDs assigned to this radio." ::= { wsCcRfRadioStatusEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.18 wsCcRfRadioStatusCurrSecondaryChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "current channel (may be different from configured channel due to DFS etc)." ::= { wsCcRfRadioStatusEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.19 wsCcRfRadioStatusMtu OBJECT-TYPE SYNTAX Integer32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The MTU of radio, specified in octets." ::= { wsCcRfRadioStatusEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.20 wsCcRfRadioStatusSpeed OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the radio's current bandwidth in units of kbps." ::= { wsCcRfRadioStatusEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.21 wsCcRfRadioStatusLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the radio entered its current operational state." ::= { wsCcRfRadioStatusEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.22 wsCcRfRadioStatusMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit map for current radio mode (may be different from configured mode). Bit position: The Least Significant Bit corresponds to the first bit in the map. The next bit corresponds to the second bit and so on. Unused bits are ignored. bit position meaning ============ ======= 0 dot11a 1 dot11b 2 dot11g 3 dot11an 4 dot11gn Bit values: 1 - enabled 0 - disabled" ::= { wsCcRfRadioStatusEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.11.11.1.23 wsCcRfRadioStatusUpdownTimes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the radio link changed state." ::= { wsCcRfRadioStatusEntry 23 } -- 802.1x Port Authentication is used to provide -- security and authentication of all wired clients on -- a network. The WS 2000 supports 802.1x port -- authentication for the AP 300 Access Ports connected -- to it. It uses a username and password for all ports -- that can be configured from the wireless switch. -- 1.3.6.1.4.1.388.14.3.2.1.11.12 wsCcRf802dt1xRadioAuth OBJECT IDENTIFIER ::= { wsCcRfRadio 12 } -- 1.3.6.1.4.1.388.14.3.2.1.11.12.1 wsCcRf802dt1xRadioAuthLogin OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "802.1x Port Authentication username." ::= { wsCcRf802dt1xRadioAuth 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.12.2 wsCcRf802dt1xRadioAuthPass OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "802.1x Port Authentication password." ::= { wsCcRf802dt1xRadioAuth 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.12.3 wsCcRf802dt1xRadioAuthSetRadio OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Set the username and password stored in wsCcRf802dt1xRadioAuthLogin and wsCcRf802dt1xRadioAuthPass on all radios adopted by the switch." ::= { wsCcRf802dt1xRadioAuth 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.13 wsCcRfRadioHealingModeCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { wsCcRfRadio 13 } -- 1.3.6.1.4.1.388.14.3.2.1.11.14 wsCcRfRadioNormalModeCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsCcRfRadio 14 } -- 1.3.6.1.4.1.388.14.3.2.1.11.15 wsCcRfRadioConfiguredCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured radios. This is a count of the number of rows in wsCcRfRadioTable." ::= { wsCcRfRadio 15 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16 wsCcRfRadioBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives information related to the bridging capabilities of the radios adopted by the wireless switch." ::= { wsCcRfRadio 16 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1 wsCcRfRadioBridgeEntry OBJECT-TYPE SYNTAX WsCcRfRadioBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfRadioBridgeTable." INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioBridgeTable 1 } WsCcRfRadioBridgeEntry ::= SEQUENCE { wsCcRfRadioBridgeClientBridgeEnable TruthValue, wsCcRfRadioBridgeBaseBridgeEnable TruthValue, wsCcRfRadioBridgeSsid DisplayString, wsCcRfRadioBridgeLinkTimeout INTEGER, wsCcRfRadioBridgeMaxClientBridges INTEGER, wsCcRfRadioBridgeMaxClientBridgeMeshAssocs INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1.1 wsCcRfRadioBridgeClientBridgeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables client-bridge functionality on the radio." ::= { wsCcRfRadioBridgeEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1.2 wsCcRfRadioBridgeBaseBridgeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the given radio to act as a base bridge and accept connections from client bridges." ::= { wsCcRfRadioBridgeEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1.3 wsCcRfRadioBridgeSsid OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the bridge SSID (max length 32 characters)." ::= { wsCcRfRadioBridgeEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1.4 wsCcRfRadioBridgeLinkTimeout OBJECT-TYPE SYNTAX INTEGER (0 | 1 | 2..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge link timeout. 0 Disable uplink detection 1 Uplink detect - shutdown when all mesh-backhaul links are down 2..200 Timeout in seconds" ::= { wsCcRfRadioBridgeEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1.5 wsCcRfRadioBridgeMaxClientBridges OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the maximum client-bridge connections permissible." DEFVAL { 12 } ::= { wsCcRfRadioBridgeEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.16.1.6 wsCcRfRadioBridgeMaxClientBridgeMeshAssocs OBJECT-TYPE SYNTAX INTEGER (0 | 1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of client bridge mesh associations. 0 : This object is not applicable for the radio. 1..3 : Maximum number of client bridge mesh associations. Write access is supported only for some models of Adaptive Access Points. The values that can be written are 1..3." DEFVAL { 3 } ::= { wsCcRfRadioBridgeEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.20 wsCcRfRadioGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A read only table showing radios to their group id mapping." ::= { wsCcRfRadio 20 } -- 1.3.6.1.4.1.388.14.3.2.1.11.20.1 wsCcRfRadioGroupEntry OBJECT-TYPE SYNTAX WsCcRfRadioGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in wsCcRfRadioGroupTable." INDEX { wsCcRfRadioGroupTableGrpId, wsCcRfRadioGroupRadioId } ::= { wsCcRfRadioGroupTable 1 } WsCcRfRadioGroupEntry ::= SEQUENCE { wsCcRfRadioGroupTableGrpId INTEGER, wsCcRfRadioGroupRadioId INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.20.1.1 wsCcRfRadioGroupTableGrpId OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The group id to which this radio belongs." ::= { wsCcRfRadioGroupEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.20.1.2 wsCcRfRadioGroupRadioId OBJECT-TYPE SYNTAX INTEGER (1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The radio id (value same as wsCcRfRadioIndex) which belongs to this group." ::= { wsCcRfRadioGroupEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21 wsCcRfRadioAdmissionControlTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioAdmissionControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure admission control parameters for devices sending voice traffic." ::= { wsCcRfRadio 21 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21.1 wsCcRfRadioAdmissionControlEntry OBJECT-TYPE SYNTAX WsCcRfRadioAdmissionControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfRadioIndex, wsCcRfRadioAdmissionControlAccessCategory } ::= { wsCcRfRadioAdmissionControlTable 1 } WsCcRfRadioAdmissionControlEntry ::= SEQUENCE { wsCcRfRadioAdmissionControlAccessCategory INTEGER, wsCcRfRadioAdmissionControlMaxAirTime Unsigned32, wsCcRfRadioAdmissionControlReservedRoamTime Unsigned32, wsCcRfRadioAdmissionControlMaxAdmittedDevices Unsigned32, wsCcRfRadioAdmissionControlMaxRoamedDevices Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21.1.1 wsCcRfRadioAdmissionControlAccessCategory OBJECT-TYPE SYNTAX INTEGER { acVideo(3), acVoice(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A label for a particular QoS category of traffic. WMM standard suggests to perform admission control for maintaining QoS of traffic sent using Video and Voice access category." ::= { wsCcRfRadioAdmissionControlEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21.1.2 wsCcRfRadioAdmissionControlMaxAirTime OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum percentage of air time that can be distributed among devices sending traffic using a particular access category. For example, configuring a value of 70% for voice, means that a total 700 ms out of 1000 ms will be distributed among devices which setup voice calls. This helps in maintaining the QoS of existing calls on a particular radio." ::= { wsCcRfRadioAdmissionControlEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21.1.3 wsCcRfRadioAdmissionControlReservedRoamTime OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Maxmimum percentage of air time reserved for devices which have roamed. This value should be less than the value specified for wsCcRfRadioAdmissionControlMaxAirTime." ::= { wsCcRfRadioAdmissionControlEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21.1.4 wsCcRfRadioAdmissionControlMaxAdmittedDevices OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Max devices that the radio will admit for sending voice traffic without leading to oversubscription. A value of 0 would disable admission control for the access category." ::= { wsCcRfRadioAdmissionControlEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.21.1.5 wsCcRfRadioAdmissionControlMaxRoamedDevices OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum roamed devices that the radio will admit for sending voice traffic after the count of admitted devices has reached wsCcRfRadioAdmissionControlMaxAdmittedDevices. " ::= { wsCcRfRadioAdmissionControlEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22 wsCcRfRadioDefaultAdmissionControlTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioDefaultAdmissionControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure default admission control parameters for different radios." ::= { wsCcRfRadio 22 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22.1 wsCcRfRadioDefaultAdmissionControlEntry OBJECT-TYPE SYNTAX WsCcRfRadioDefaultAdmissionControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfRadioDefaultIndex, wsCcRfRadioDefaultAdmissionControlAccessCategory } ::= { wsCcRfRadioDefaultAdmissionControlTable 1 } WsCcRfRadioDefaultAdmissionControlEntry ::= SEQUENCE { wsCcRfRadioDefaultAdmissionControlAccessCategory INTEGER, wsCcRfRadioDefaultAdmissionControlMaxAirTime Unsigned32, wsCcRfRadioDefaultAdmissionControlReservedRoamTime Unsigned32, wsCcRfRadioDefaultAdmissionControlMaxAdmittedDevices Unsigned32, wsCcRfRadioDefaultAdmissionControlMaxRoamedDevices Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22.1.1 wsCcRfRadioDefaultAdmissionControlAccessCategory OBJECT-TYPE SYNTAX INTEGER { acVideo(3), acVoice(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A label for a particular QoS category of traffic. WMM standard suggests to perform admission control for maintaining QoS of traffic sent using Video and Voice access category." ::= { wsCcRfRadioDefaultAdmissionControlEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22.1.2 wsCcRfRadioDefaultAdmissionControlMaxAirTime OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The default maximum percentage of air time for a particular access category. " ::= { wsCcRfRadioDefaultAdmissionControlEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22.1.3 wsCcRfRadioDefaultAdmissionControlReservedRoamTime OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The default percentage of air time reserved for roaming for a particular access category." ::= { wsCcRfRadioDefaultAdmissionControlEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22.1.4 wsCcRfRadioDefaultAdmissionControlMaxAdmittedDevices OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The default maximum number of devices that can be admitted to send traffic using a particular access category." ::= { wsCcRfRadioDefaultAdmissionControlEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.22.1.5 wsCcRfRadioDefaultAdmissionControlMaxRoamedDevices OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The default maximum roamed devices that a radio will admit for sending voice traffic after the count of admitted devices has reached wsCcRfRadioDefaultAdmissionControlMaxAdmittedDevices. " ::= { wsCcRfRadioDefaultAdmissionControlEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23 wsCcRfRadioAdmissionControlStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioAdmissionControlStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfRadio 23 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23.1 wsCcRfRadioAdmissionControlStatusEntry OBJECT-TYPE SYNTAX WsCcRfRadioAdmissionControlStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfRadioIndex, wsCcRfRadioAdmissionControlStatusAccessCategory } ::= { wsCcRfRadioAdmissionControlStatusTable 1 } WsCcRfRadioAdmissionControlStatusEntry ::= SEQUENCE { wsCcRfRadioAdmissionControlStatusAccessCategory INTEGER, wsCcRfRadioAdmissionControlStatusAirTimeUsage Unsigned32, wsCcRfRadioAdmissionControlStatusAdmittedDevices Unsigned32, wsCcRfRadioAdmissionControlStatusRoamedDevices Unsigned32, wsCcRfRadioAdmissionControlStatusRequestDenied Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23.1.1 wsCcRfRadioAdmissionControlStatusAccessCategory OBJECT-TYPE SYNTAX INTEGER { acVoice(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Admission control statistics for WMM voice access category." ::= { wsCcRfRadioAdmissionControlStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23.1.2 wsCcRfRadioAdmissionControlStatusAirTimeUsage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total percentage of air time used on the radio by devices which have been admitted." ::= { wsCcRfRadioAdmissionControlStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23.1.3 wsCcRfRadioAdmissionControlStatusAdmittedDevices OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of admitted devices." ::= { wsCcRfRadioAdmissionControlStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23.1.4 wsCcRfRadioAdmissionControlStatusRoamedDevices OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of roamed devices which have been admitted." ::= { wsCcRfRadioAdmissionControlStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.23.1.5 wsCcRfRadioAdmissionControlStatusRequestDenied OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of requests which have been denied either due to insufficient air time or maximum device capacity." ::= { wsCcRfRadioAdmissionControlStatusEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.24 wsCcRfRadioAdmissionControlEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), voice(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable admission control for voice traffic. This also enables WMM admission control for Voice access category. A value of 0 disables admission control across all radios." ::= { wsCcRfRadio 24 } -- 1.3.6.1.4.1.388.14.3.2.1.11.25 wsCcRfRadioWipsTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioWipsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table gives information related to the WIPS mode of the radios adopted by the wireless switch." ::= { wsCcRfRadio 25 } -- 1.3.6.1.4.1.388.14.3.2.1.11.25.1 wsCcRfRadioWipsEntry OBJECT-TYPE SYNTAX WsCcRfRadioWipsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the wsCcRfRadioWipsTable." INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioWipsTable 1 } WsCcRfRadioWipsEntry ::= SEQUENCE { wsCcRfRadioRfFunctionWipsEnable TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.11.25.1.1 wsCcRfRadioRfFunctionWipsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Converts the given radio from the WLAN mode to the WIPS mode." ::= { wsCcRfRadioWipsEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26 wsCcRfRadio11nTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadio11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all 11n radios adopted by this wireless switch. A row in this table is an extension of a row in wsCcRfRadioTable with the relationship being sparse." ::= { wsCcRfRadio 26 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1 wsCcRfRadio11nEntry OBJECT-TYPE SYNTAX WsCcRfRadio11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadio11nTable 1 } WsCcRfRadio11nEntry ::= SEQUENCE { wsCcRfRadio11nShortGIEnable TruthValue, wsCcRfRadio11nAmpduMinSpacing INTEGER, wsCcRfRadio11nAmpduRxLimit INTEGER, wsCcRfRadio11nAmpduTxLimit Unsigned32, wsCcRfRadio11nAmpduTxEnable TruthValue, wsCcRfRadio11nAmsduTxEnable TruthValue, wsCcRfRadio11nAmsduRxLimit INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.1 wsCcRfRadio11nShortGIEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable short guard interval." DEFVAL { true } ::= { wsCcRfRadio11nEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.2 wsCcRfRadio11nAmpduMinSpacing OBJECT-TYPE SYNTAX INTEGER { noRestriction(1), oneFourthMicrosec(2), oneHalfMicrosec(3), oneMicrosec(4), twoMicrosec(5), fourMicrosec(6), eightMicrosec(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum spacing between the start of adjacent MPDUs within an A-MPDU." DEFVAL { noRestriction } ::= { wsCcRfRadio11nEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.3 wsCcRfRadio11nAmpduRxLimit OBJECT-TYPE SYNTAX INTEGER { size8191(1), size16383(2), size32767(3), size65535(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum length of A-MPDU that the radio can receive." DEFVAL { size65535 } ::= { wsCcRfRadio11nEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.4 wsCcRfRadio11nAmpduTxLimit OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum length of A-MPDU that the radio can send." DEFVAL { 65535 } ::= { wsCcRfRadio11nEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.5 wsCcRfRadio11nAmpduTxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable transmission of A-MPDU." DEFVAL { true } ::= { wsCcRfRadio11nEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.6 wsCcRfRadio11nAmsduTxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable transmission of A-MSDU." DEFVAL { true } ::= { wsCcRfRadio11nEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.26.1.7 wsCcRfRadio11nAmsduRxLimit OBJECT-TYPE SYNTAX INTEGER { size3839(1), size7935(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum length of A-MSDU that the radio can receive." DEFVAL { size7935 } ::= { wsCcRfRadio11nEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27 wsCcRfRadioDefault11nTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioDefault11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the default setting for all supported 11n radios for this wireless switch. A row in this table is an extension of a row in wsCcRfRadioDefaultTable with the relationship being sparse." ::= { wsCcRfRadio 27 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1 wsCcRfRadioDefault11nEntry OBJECT-TYPE SYNTAX WsCcRfRadioDefault11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfRadioDefaultIndex } ::= { wsCcRfRadioDefault11nTable 1 } WsCcRfRadioDefault11nEntry ::= SEQUENCE { wsCcRfRadioDefault11nShortGIEnable TruthValue, wsCcRfRadioDefault11nAmpduMinSpacing INTEGER, wsCcRfRadioDefault11nAmpduRxLimit INTEGER, wsCcRfRadioDefault11nAmpduTxLimit Unsigned32, wsCcRfRadioDefault11nAmpduTxEnable TruthValue, wsCcRfRadioDefault11nAmsduTxEnable TruthValue, wsCcRfRadioDefault11nAmsduRxLimit INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.1 wsCcRfRadioDefault11nShortGIEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable short guard interval." DEFVAL { true } ::= { wsCcRfRadioDefault11nEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.2 wsCcRfRadioDefault11nAmpduMinSpacing OBJECT-TYPE SYNTAX INTEGER { noRestriction(1), oneFourthMicrosec(2), oneHalfMicrosec(3), oneMicrosec(4), twoMicrosec(5), fourMicrosec(6), eightMicrosec(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum spacing between the start of adjacent MPDUs within an A-MPDU." DEFVAL { noRestriction } ::= { wsCcRfRadioDefault11nEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.3 wsCcRfRadioDefault11nAmpduRxLimit OBJECT-TYPE SYNTAX INTEGER { size8191(1), size16383(2), size32767(3), size65535(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum length of A-MPDU that the radio can receive." DEFVAL { size65535 } ::= { wsCcRfRadioDefault11nEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.4 wsCcRfRadioDefault11nAmpduTxLimit OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum length of A-MPDU that the radio can send." DEFVAL { 65535 } ::= { wsCcRfRadioDefault11nEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.5 wsCcRfRadioDefault11nAmpduTxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable transmission of A-MPDU." DEFVAL { true } ::= { wsCcRfRadioDefault11nEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.6 wsCcRfRadioDefault11nAmsduTxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable transmission of A-MPDU." DEFVAL { true } ::= { wsCcRfRadioDefault11nEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.11.27.1.7 wsCcRfRadioDefault11nAmsduRxLimit OBJECT-TYPE SYNTAX INTEGER { size3839(1), size7935(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum length of A-MSDU that the radio can receive." DEFVAL { size7935 } ::= { wsCcRfRadioDefault11nEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.11.28 wsCcRfRadioChannelPower11nTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioChannelPower11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the channel/power/placement properties of 11n radio. A row in this table is an extension of a row in wsCcRfRadioChannelPowerTable with the relationship being sparse." ::= { wsCcRfRadio 28 } -- 1.3.6.1.4.1.388.14.3.2.1.11.28.1 wsCcRfRadioChannelPower11nEntry OBJECT-TYPE SYNTAX WsCcRfRadioChannelPower11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfRadioIndex } ::= { wsCcRfRadioChannelPower11nTable 1 } WsCcRfRadioChannelPower11nEntry ::= SEQUENCE { wsCcRfRadioCp11nChannelWidth INTEGER, wsCcRfRadioCp11nSecondaryChannel INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.28.1.1 wsCcRfRadioCp11nChannelWidth OBJECT-TYPE SYNTAX INTEGER { twentyMHz(1), fortyMHz(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The channel width. This object is for 11n radio when wsCcRfRadioCpChannelMode is 'random' or 'acs'. Values of channel width are: 20 MHz - The Legacy mode, single channel is used 40 MHz - Primary and secondary channel chosen The default channel width is 40 MHz." ::= { wsCcRfRadioChannelPower11nEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.28.1.2 wsCcRfRadioCp11nSecondaryChannel OBJECT-TYPE SYNTAX INTEGER { none(1), upper(2), lower(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The choice for secondary channel. This object is for 11n radio when wsCcRfRadioCpChannelMode is 'fixed'. Values of secondary channel are: none - 20 MHz channel width is used. upper - The upper adjacent channel is used thereby doubling the channel width lower - The lower adjacent channel is used thereby doubling the channel width. The default value is 'none'." ::= { wsCcRfRadioChannelPower11nEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.29 wsCcRfRadioDefaultChannelPower11nTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioDefaultChannelPower11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the default channel/power/placement properties of 11n radio. A row in this table is an extension of a row in wsCcRfRadioDefaultChannelPowerTable with the relationship being sparse." ::= { wsCcRfRadio 29 } -- 1.3.6.1.4.1.388.14.3.2.1.11.29.1 wsCcRfRadioDefaultChannelPower11nEntry OBJECT-TYPE SYNTAX WsCcRfRadioDefaultChannelPower11nEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfRadioDefaultIndex } ::= { wsCcRfRadioDefaultChannelPower11nTable 1 } WsCcRfRadioDefaultChannelPower11nEntry ::= SEQUENCE { wsCcRfRadioDefaultCp11nChannelWidth INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.29.1.1 wsCcRfRadioDefaultCp11nChannelWidth OBJECT-TYPE SYNTAX INTEGER { twentyMHz(1), fortyMHz(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default channel width. This object is for 11n radio when wsCcRfRadioDefaultCpChannelMode is 'random' or 'acs'. Values of channel width are: 20 MHz - The Legacy mode, single channel is used 40 MHz - Primary and secondary channel chosen The default channel width is 40 MHz." ::= { wsCcRfRadioDefaultChannelPower11nEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.30 wsCcRfRadioVoiceStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioVoiceStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the voice status objects applicable to radio. A row in this table is an extension of a row in wsCcRfRadioStatusTable with the relationship being one-to-one." ::= { wsCcRfRadio 30 } -- 1.3.6.1.4.1.388.14.3.2.1.11.30.1 wsCcRfRadioVoiceStatusEntry OBJECT-TYPE SYNTAX WsCcRfRadioVoiceStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." AUGMENTS { wsCcRfRadioStatusEntry } ::= { wsCcRfRadioVoiceStatusTable 1 } WsCcRfRadioVoiceStatusEntry ::= SEQUENCE { wsCcRfRadioVoiceStatusOtherCalls Unsigned32, wsCcRfRadioVoiceStatusSipCalls Unsigned32, wsCcRfRadioVoiceStatusSccpCalls Unsigned32, wsCcRfRadioVoiceStatusSvpCalls Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.30.1.1 wsCcRfRadioVoiceStatusOtherCalls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current calls for which the protocol is other than those defined in the objects that follow." ::= { wsCcRfRadioVoiceStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.30.1.2 wsCcRfRadioVoiceStatusSipCalls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current calls for which the protocol is SIP." ::= { wsCcRfRadioVoiceStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.30.1.3 wsCcRfRadioVoiceStatusSccpCalls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current calls for which the protocol is SCCP." ::= { wsCcRfRadioVoiceStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.30.1.4 wsCcRfRadioVoiceStatusSvpCalls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current calls for which the protocol is SVP." ::= { wsCcRfRadioVoiceStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.31 wsCcRfRadioWlanTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the WLAN configuration and status objects applicable to radio. This table is an expansion table of wsCcRfRadioStatusTable. For each adopted radio, there is one row instance for each WLAN configured on it." ::= { wsCcRfRadio 31 } -- 1.3.6.1.4.1.388.14.3.2.1.11.31.1 wsCcRfRadioWlanEntry OBJECT-TYPE SYNTAX WsCcRfRadioWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfRadioIndex, wsCcRfWlanIndex } ::= { wsCcRfRadioWlanTable 1 } WsCcRfRadioWlanEntry ::= SEQUENCE { wsCcRfRadioWlanEssid DisplayString, wsCcRfRadioWlanBssid PhysAddress, wsCcRfRadioWlanRowStatus AbbrevRowStatus, wsCcRfRadioWlanBssIndex INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.11.31.1.1 wsCcRfRadioWlanEssid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ESSID of the WLAN." ::= { wsCcRfRadioWlanEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.31.1.2 wsCcRfRadioWlanBssid OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "BSSID" ::= { wsCcRfRadioWlanEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.31.1.3 wsCcRfRadioWlanRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { wsCcRfRadioWlanEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.31.1.4 wsCcRfRadioWlanBssIndex OBJECT-TYPE SYNTAX INTEGER (0 | 1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "BSS index. 0 Assign automatically 1..4 BSS index" DEFVAL { 0 } ::= { wsCcRfRadioWlanEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32 wsCcRfRadioWmmAltTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRadioWmmAltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network" ::= { wsCcRfRadio 32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32.1 wsCcRfRadioWmmAltEntry OBJECT-TYPE SYNTAX WsCcRfRadioWmmAltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioIndex, wsCcRfRadioWmmAltAccessCategory } ::= { wsCcRfRadioWmmAltTable 1 } WsCcRfRadioWmmAltEntry ::= SEQUENCE { wsCcRfRadioWmmAltAccessCategory INTEGER, wsCcRfRadioWmmAltAifsn Unsigned32, wsCcRfRadioWmmAltTxOp Unsigned32, wsCcRfRadioWmmAltCwMin Unsigned32, wsCcRfRadioWmmAltCwMax Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32.1.1 wsCcRfRadioWmmAltAccessCategory OBJECT-TYPE SYNTAX INTEGER { acBestEffort(1), acBackground(2), acVideo(3), acVoice(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A label for a particular QoS category of traffic in an 802.11e network. WMM defines 4 Access Categories (Voice, Video, Best Effort, Background)." ::= { wsCcRfRadioWmmAltEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32.1.2 wsCcRfRadioWmmAltAifsn OBJECT-TYPE SYNTAX Unsigned32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The Arbitration Inter-Frame Spacing is the wait time in milliSeconds between data frames. A smaller number leads to greater priority for medium access." ::= { wsCcRfRadioWmmAltEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32.1.3 wsCcRfRadioWmmAltTxOp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "millisecond" MAX-ACCESS read-write STATUS current DESCRIPTION "An interval of time where an 802.11e station (MU/AP) has the right to initiate transmissions on the wireless medium." ::= { wsCcRfRadioWmmAltEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32.1.4 wsCcRfRadioWmmAltCwMin OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "If the medium is busy, or a transmitted frame collides, the AP or MU choose a random number between 0 and this minimum contention window size, to decide how long to wait before attempting (re)-transmission. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured." ::= { wsCcRfRadioWmmAltEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.11.32.1.5 wsCcRfRadioWmmAltCwMax OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "On each collision the AP or MU doubles its initial contention window wait time, until that number is as large as this maximum contention window size. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured." ::= { wsCcRfRadioWmmAltEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12 wsCcRfMus OBJECT IDENTIFIER ::= { wsCcRfMIB 12 } -- 1.3.6.1.4.1.388.14.3.2.1.12.1 wsCcRfMuCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows in the wsCcRfMuTable " ::= { wsCcRfMus 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.2 wsCcRfMuLastMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar records the MAC address of the most recent mu to be associated/disassociated." ::= { wsCcRfMus 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3 wsCcRfMuTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes general information about each MU serviced by the switch." ::= { wsCcRfMus 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1 wsCcRfMuEntry OBJECT-TYPE SYNTAX WsCcRfMuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfMuMac } ::= { wsCcRfMuTable 1 } WsCcRfMuEntry ::= SEQUENCE { wsCcRfMuMac PhysAddress, wsCcRfMuWlanIndex Integer32, wsCcRfMuRadioIndex Integer32, wsCcRfMuVlanIndex Unsigned32, wsCcRfMuKeyIndex Unsigned32, wsCcRfMuIpAddr IpAddress, wsCcRfMuBSS PhysAddress, wsCcRfMuAuthMethod AuthType, wsCcRfMuEncMethod EncType, wsCcRfMuRadioType RadioType, wsCcRfMuPowerMode INTEGER, wsCcRfMuSupportedRates TransmitRate, wsCcRfMuVoice INTEGER, wsCcRfMuIsDataReady TruthValue, wsCcRfMuRogueApEna TruthValue, wsCcRfMuIsWmm TruthValue, wsCcRfMuRoamCount Unsigned32, wsCcRfMuLastHeard TimeTicks, wsCcRfMuDisassociateNow DoActionNow, wsCcRfMuTunnelIndex INTEGER, wsCcRfMuQosInfo INTEGER, wsCcRfMuLastAssoc Unsigned32, wsCcRfMuSessionTimeout Unsigned32, wsCcRfMuIdleTimeout Unsigned32, wsCcRfMuRoleName DisplayString, wsCcRfMuGroup DisplayString, wsCcRfMuLocation DisplayString, wsCcRfMuLockOutNow DoActionNow, wsCcRfMuVoiceDevType INTEGER, wsCcRfMuVoiceActive TruthValue, wsCcRfMuUpTime Unsigned32, wsCcRfMuCurrChannel Unsigned32, wsCcRfMuEssid DisplayString, wsCcRfMuDot11Authentication INTEGER, wsCcRfMuSecurity INTEGER, wsCcRfMuAltAuthentication INTEGER, wsCcRfMuAltEncryption INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.1 wsCcRfMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MU." ::= { wsCcRfMuEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.2 wsCcRfMuWlanIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "(Reserved for future implementation)." ::= { wsCcRfMuEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.3 wsCcRfMuRadioIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the entry in the wsCcRfRadioTable to which this MU is associated." ::= { wsCcRfMuEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.4 wsCcRfMuVlanIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN that this MU is assigned to." ::= { wsCcRfMuEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.5 wsCcRfMuKeyIndex OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The key index using which the MU is sending us frames. Useful when pre-shared keys are used with WEP, as we will know if this MU is " ::= { wsCcRfMuEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.6 wsCcRfMuIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of the MU." ::= { wsCcRfMuEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.7 wsCcRfMuBSS OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BSSID that this MU is associated with." ::= { wsCcRfMuEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.8 wsCcRfMuAuthMethod OBJECT-TYPE SYNTAX AuthType MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication method implemented by the MU." ::= { wsCcRfMuEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.9 wsCcRfMuEncMethod OBJECT-TYPE SYNTAX EncType MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption method implemented by the MU." ::= { wsCcRfMuEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.10 wsCcRfMuRadioType OBJECT-TYPE SYNTAX RadioType MAX-ACCESS read-only STATUS current DESCRIPTION "Radio type of the MU." ::= { wsCcRfMuEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.11 wsCcRfMuPowerMode OBJECT-TYPE SYNTAX INTEGER { continuousAccessMode(1), powerSavePolling(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Power-mode implemented by the MU. A MU's status will constantly switch between PSP and CAM mode when it is in PSP mode. " ::= { wsCcRfMuEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.12 wsCcRfMuSupportedRates OBJECT-TYPE SYNTAX TransmitRate MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-mask of rates supported by this MU." ::= { wsCcRfMuEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.13 wsCcRfMuVoice OBJECT-TYPE SYNTAX INTEGER { data(1), voice(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this MU has registered itself as voice-capable." ::= { wsCcRfMuEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.14 wsCcRfMuIsDataReady OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is true if the wireless switch is ready to forward/switch packets to/from this MU, (internally called the 'data ready' state). Otherwise this value is false." ::= { wsCcRfMuEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.15 wsCcRfMuRogueApEna OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, this MU supports Rogue AP detection assist algorithm." ::= { wsCcRfMuEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.16 wsCcRfMuIsWmm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the MU is using WMM" ::= { wsCcRfMuEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.17 wsCcRfMuRoamCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the mu has roamed without de-authentication." ::= { wsCcRfMuEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.18 wsCcRfMuLastHeard OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since last heard from MU. " ::= { wsCcRfMuEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.19 wsCcRfMuDisassociateNow OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to one initiates the action to disassociate the MU." ::= { wsCcRfMuEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.20 wsCcRfMuTunnelIndex OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel identifier for this MU." ::= { wsCcRfMuEntry 20 } -- Shows the UAPSD parameters for a given MU. This field has the following bit values : -- -- Bit 0 - UAPSD enabled for Voice AC -- Bit 1 - UAPSD enabled for Video AC -- Bit 2 - UAPSD enabled for Best-Effort AC -- Bit 3 - UAPSD enabled for Background AC -- Bits 4-5 - UAPSD service period ( 00 - unlimited, 01 - 2 packets, 10 - 4 packets, 11 - 6 packets ). -- -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.21 wsCcRfMuQosInfo OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "UAPSD parameters for a given MU. Has the following bit values : Bit 0 - UAPSD enabled for Voice AC Bit 1 - UAPSD enabled for Video AC Bit 2 - UAPSD enabled for Best-Effort AC Bit 3 - UAPSD enabled for Background AC Bits 4-5 - UAPSD service period ( 00 - unlimited, 01 - 2 packets, 10 - 4 packets, 11 - 6 packets ). " ::= { wsCcRfMuEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.22 wsCcRfMuLastAssoc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds elapsed since the last association." ::= { wsCcRfMuEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.23 wsCcRfMuSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..8640000) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Session Timeout. A value of 8640000 specifies unlimited session timeout." ::= { wsCcRfMuEntry 23 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.24 wsCcRfMuIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Idle Timeout" ::= { wsCcRfMuEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.25 wsCcRfMuRoleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the role that this MU is assigned with" ::= { wsCcRfMuEntry 25 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.26 wsCcRfMuGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Radius user group to which the MU belongs to" ::= { wsCcRfMuEntry 26 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.27 wsCcRfMuLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MU is connected from which zone. This information will be provided by SOLE engine." ::= { wsCcRfMuEntry 27 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.28 wsCcRfMuLockOutNow OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to one(1) initiates the action to disassociate the MU and set the MAC filter (i.e. associate the ACL) for this MU in one shot." ::= { wsCcRfMuEntry 28 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.29 wsCcRfMuVoiceDevType OBJECT-TYPE SYNTAX INTEGER { na(0), other(1), sip(2), sccp(3), svp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This device type of voice-capable MU. na : Not applicable. The MU is not voice-capable. other : A voice-capable device type other than those defined below sip : SIP device sccp : SCCP device svp : Spectralink device" ::= { wsCcRfMuEntry 29 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.30 wsCcRfMuVoiceActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the MU is in an active call." ::= { wsCcRfMuEntry 30 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.31 wsCcRfMuUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds elapsed since the first association." ::= { wsCcRfMuEntry 31 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.32 wsCcRfMuCurrChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current channel of the MU." ::= { wsCcRfMuEntry 32 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.33 wsCcRfMuEssid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ESSID of the WLAN to which this MU is associated." ::= { wsCcRfMuEntry 33 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.34 wsCcRfMuDot11Authentication OBJECT-TYPE SYNTAX INTEGER { openSystem(1), sharedKey(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication algorithm." ::= { wsCcRfMuEntry 34 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.35 wsCcRfMuSecurity OBJECT-TYPE SYNTAX INTEGER { none(1), wpa(2), wpa2(3), wapi(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Security method." ::= { wsCcRfMuEntry 35 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.36 wsCcRfMuAltAuthentication OBJECT-TYPE SYNTAX INTEGER { none(1), psk(2), radius(3), wapiCert(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alternate object for authentication method." ::= { wsCcRfMuEntry 36 } -- 1.3.6.1.4.1.388.14.3.2.1.12.3.1.37 wsCcRfMuAltEncryption OBJECT-TYPE SYNTAX INTEGER { none(1), wep40(2), tkip(3), aesCcmp(4), wep104(5), wapi(6), wpaWpa2(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alternate object for encryption method." ::= { wsCcRfMuEntry 37 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4 wsCcRfMuHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuHistoryEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Description." ::= { wsCcRfMus 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1 wsCcRfMuHistoryEntry OBJECT-TYPE SYNTAX WsCcRfMuHistoryEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Description." INDEX { wsCcRfMuHistoryIndex, wsCcRfMuHistoryMac } ::= { wsCcRfMuHistoryTable 1 } WsCcRfMuHistoryEntry ::= SEQUENCE { wsCcRfMuHistoryIndex INTEGER, wsCcRfMuHistoryMac PhysAddress, wsCcRfMuHistoryRadioIndex INTEGER, wsCcRfMuHistoryWlanIndex INTEGER, wsCcRfMuHistoryTimestamp Unsigned32, wsCcRfMuHistoryEvent INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1.1 wsCcRfMuHistoryIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Simple Index" ::= { wsCcRfMuHistoryEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1.2 wsCcRfMuHistoryMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "MAC address of MU" ::= { wsCcRfMuHistoryEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1.3 wsCcRfMuHistoryRadioIndex OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Index of Radio" ::= { wsCcRfMuHistoryEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1.4 wsCcRfMuHistoryWlanIndex OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Index of Wlan" ::= { wsCcRfMuHistoryEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1.5 wsCcRfMuHistoryTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The event happened wsCcRfMuHistoryTimestamp seconds ago" ::= { wsCcRfMuHistoryEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.4.1.6 wsCcRfMuHistoryEvent OBJECT-TYPE SYNTAX INTEGER { adoption(1), disassociation(2), timeout(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Event: Adoption, disassociation or timeout." ::= { wsCcRfMuHistoryEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.12.5 wsCfRfMuProbeHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCfRfMuProbeHistoryEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Description." ::= { wsCcRfMus 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.5.1 wsCfRfMuProbeHistoryEntry OBJECT-TYPE SYNTAX WsCfRfMuProbeHistoryEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Description." INDEX { wsCfRfMuProbeHistoryMac, wsCfRfMuProbeHistoryIndex } ::= { wsCfRfMuProbeHistoryTable 1 } WsCfRfMuProbeHistoryEntry ::= SEQUENCE { wsCfRfMuProbeHistoryMac PhysAddress, wsCfRfMuProbeHistoryIndex INTEGER, wsCfRfMuProbeHistoryTimeticks Unsigned32, wsCfRfMuProbeHistorySignalStrength Integer32, wsCfRfMuProbeHeardRadio INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.12.5.1.1 wsCfRfMuProbeHistoryMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Description." ::= { wsCfRfMuProbeHistoryEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.5.1.2 wsCfRfMuProbeHistoryIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Simple Index" ::= { wsCfRfMuProbeHistoryEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.5.1.4 wsCfRfMuProbeHistoryTimeticks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Date and Time" ::= { wsCfRfMuProbeHistoryEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.5.1.5 wsCfRfMuProbeHistorySignalStrength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "It is not yet decided if this will be reported in db or rssi" ::= { wsCfRfMuProbeHistoryEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.5.1.6 wsCfRfMuProbeHeardRadio OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Index of the heard radio." ::= { wsCfRfMuProbeHistoryEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.12.6 wsCcRfMuProbeRequestsAgeHeardOut OBJECT-TYPE SYNTAX INTEGER (15..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Range is from 15 secs - 15 minutes" ::= { wsCcRfMus 6 } -- 1.3.6.1.4.1.388.14.3.2.1.12.7 wsCcRfMuHistoryEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / disable MU history data collection" ::= { wsCcRfMus 7 } -- 1.3.6.1.4.1.388.14.3.2.1.12.8 wsCcRfMuHistoryClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the entries in the MU History table." ::= { wsCcRfMus 8 } -- 1.3.6.1.4.1.388.14.3.2.1.12.9 wsCcRfMuProbeHistoryEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / disable MU probe history data collection" ::= { wsCcRfMus 9 } -- 1.3.6.1.4.1.388.14.3.2.1.12.10 wsCcRfMuProbeHistoryClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the entries in the MU Probe History table." ::= { wsCcRfMus 10 } -- 1.3.6.1.4.1.388.14.3.2.1.12.11 wsCcRfMuProbeConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuProbeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to configure MUs that have to be tracked for probe history status" ::= { wsCcRfMus 11 } -- 1.3.6.1.4.1.388.14.3.2.1.12.11.1 wsCcRfMuProbeConfigEntry OBJECT-TYPE SYNTAX WsCcRfMuProbeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfMuProbeConfigIndex } ::= { wsCcRfMuProbeConfigTable 1 } WsCcRfMuProbeConfigEntry ::= SEQUENCE { wsCcRfMuProbeConfigIndex INTEGER, wsCcRfMuProbeConfigMac PhysAddress, wsCcRfMuProbeConfigStatus INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.12.11.1.1 wsCcRfMuProbeConfigIndex OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index" ::= { wsCcRfMuProbeConfigEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.11.1.2 wsCcRfMuProbeConfigMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAc address of MU to be tracked" ::= { wsCcRfMuProbeConfigEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.11.1.3 wsCcRfMuProbeConfigStatus OBJECT-TYPE SYNTAX INTEGER { inUse(1), notInUse(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set tracking on or off for particular MU" ::= { wsCcRfMuProbeConfigEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.12 wsCcRfMuProbeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuProbeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status of MU probe history" ::= { wsCcRfMus 12 } -- 1.3.6.1.4.1.388.14.3.2.1.12.12.1 wsCcRfMuProbeStatusEntry OBJECT-TYPE SYNTAX WsCcRfMuProbeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfMuProbeConfigIndex, wsCcRfMuProbeStatusIndex } ::= { wsCcRfMuProbeStatusTable 1 } WsCcRfMuProbeStatusEntry ::= SEQUENCE { wsCcRfMuProbeStatusIndex INTEGER, wsCcRfMuProbeStatusMac PhysAddress, wsCcRfMuProbeStatusTimeticks Unsigned32, wsCcRfMuProbeStatusSignalStrength Integer32, wsCcRfMuProbeStatusHeardRadio INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.12.12.1.1 wsCcRfMuProbeStatusIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Simple Index" ::= { wsCcRfMuProbeStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.12.1.2 wsCcRfMuProbeStatusMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac Address" ::= { wsCcRfMuProbeStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.12.1.4 wsCcRfMuProbeStatusTimeticks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Date and Time" ::= { wsCcRfMuProbeStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.12.1.5 wsCcRfMuProbeStatusSignalStrength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is not yet decided if this will be reported in db or rssi" ::= { wsCcRfMuProbeStatusEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.12.1.6 wsCcRfMuProbeStatusHeardRadio OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the heard radio." ::= { wsCcRfMuProbeStatusEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.12.13 wsCcRfMuHistoryStatusMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Mac addres which the user want to view the history status" ::= { wsCcRfMus 13 } -- 1.3.6.1.4.1.388.14.3.2.1.12.14 wsCcRfMuHistoryStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuHistoryStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "wsCcRfMuHistoryStatusTable, the procedure to view the table will be: 1.set the Mac address you are interested in wsCcRfMuHistoryStatusMac 2.do a walk of the table, and it will show you the history of that MU" ::= { wsCcRfMus 14 } -- 1.3.6.1.4.1.388.14.3.2.1.12.14.1 wsCcRfMuHistoryStatusEntry OBJECT-TYPE SYNTAX WsCcRfMuHistoryStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "wsCcRfMuHistoryStatusEntry" INDEX { wsCcRfMuHistoryStatusIndex } ::= { wsCcRfMuHistoryStatusTable 1 } WsCcRfMuHistoryStatusEntry ::= SEQUENCE { wsCcRfMuHistoryStatusIndex INTEGER, wsCcRfMuHistoryStatusRadioIndex INTEGER, wsCcRfMuHistoryStatusWlanIndex INTEGER, wsCcRfMuHistoryStatusTimestamp Unsigned32, wsCcRfMuHistoryStatusEvent INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.12.14.1.1 wsCcRfMuHistoryStatusIndex OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index of wsCcRfMuHistoryStatusTable" ::= { wsCcRfMuHistoryStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.14.1.2 wsCcRfMuHistoryStatusRadioIndex OBJECT-TYPE SYNTAX INTEGER (1..8192) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Radio" ::= { wsCcRfMuHistoryStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.14.1.3 wsCcRfMuHistoryStatusWlanIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Wlan" ::= { wsCcRfMuHistoryStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.14.1.4 wsCcRfMuHistoryStatusTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The event happened wsCcRfMuHistoryTimestamp seconds ago" ::= { wsCcRfMuHistoryStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.14.1.5 wsCcRfMuHistoryStatusEvent OBJECT-TYPE SYNTAX INTEGER { adoption(1), disassociation(2), timeout(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Event: Adoption, disassociation or timeout" ::= { wsCcRfMuHistoryStatusEntry 5 } -- MU Locationing Configuration -- -- 1.3.6.1.4.1.388.14.3.2.1.12.15 wsCcRfMuLocationing OBJECT IDENTIFIER ::= { wsCcRfMus 15 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.1 wsCcRfMuLocationingPreferredTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuLocationingPreferredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table having MAC addresses of the preferred MUs. Locationing information for these MUs would be captured/reported. " ::= { wsCcRfMuLocationing 1 } -- -- -- 1.3.6.1.4.1.388.14.3.2.1.12.15.1.1 wsCcRfMuLocationingPreferredEntry OBJECT-TYPE SYNTAX WsCcRfMuLocationingPreferredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the MU locationing Preferred table" INDEX { wsCcRfMuLocationingPreferredIndex } ::= { wsCcRfMuLocationingPreferredTable 1 } WsCcRfMuLocationingPreferredEntry ::= SEQUENCE { wsCcRfMuLocationingPreferredIndex INTEGER, wsCcRfMuLocationingPreferredMuMac PhysAddress, wsCcRfMuLocationingPreferredRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.1.1.1 wsCcRfMuLocationingPreferredIndex OBJECT-TYPE SYNTAX INTEGER (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the row" ::= { wsCcRfMuLocationingPreferredEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.1.1.2 wsCcRfMuLocationingPreferredMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "MAC address of the MU" ::= { wsCcRfMuLocationingPreferredEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.1.1.3 wsCcRfMuLocationingPreferredRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status" ::= { wsCcRfMuLocationingPreferredEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2 wsCcRfMuLocationingTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuLocationingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table giving locationing information about the various MUs." ::= { wsCcRfMuLocationing 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1 wsCcRfMuLocationingEntry OBJECT-TYPE SYNTAX WsCcRfMuLocationingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in MU Locationing Table" INDEX { wsCcRfMuLocationingIndex } ::= { wsCcRfMuLocationingTable 1 } WsCcRfMuLocationingEntry ::= SEQUENCE { wsCcRfMuLocationingIndex INTEGER, wsCcRfMuLocationingMuMac PhysAddress, wsCcRfMuLocationingRadioMac PhysAddress, wsCcRfMuLocationingSignalStrength Integer32, wsCcRfMuLocationingHeardChannel Integer32, wsCcRfMuLocationingHeardTime TimeTicks } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.1 wsCcRfMuLocationingIndex OBJECT-TYPE SYNTAX INTEGER (1..2560) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the row" ::= { wsCcRfMuLocationingEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.2 wsCcRfMuLocationingMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MU" ::= { wsCcRfMuLocationingEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.3 wsCcRfMuLocationingRadioMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the radio that heard the Probe Request from the MU " ::= { wsCcRfMuLocationingEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.4 wsCcRfMuLocationingSignalStrength OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The received Signal Strength in dBm" ::= { wsCcRfMuLocationingEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.5 wsCcRfMuLocationingHeardChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel on which the MU Probe Request was heard" ::= { wsCcRfMuLocationingEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.6 wsCcRfMuLocationingHeardTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time in timeticks (since boot), when the MU Probe Request was heard" ::= { wsCcRfMuLocationingEntry 6 } -- Enable MU locationing. -- 1.3.6.1.4.1.388.14.3.2.1.12.15.3 wsCcRfMuLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MU locationing. " ::= { wsCcRfMuLocationing 3 } -- Maximum number of MUs for MU locationing table. -- 1.3.6.1.4.1.388.14.3.2.1.12.15.4 wsCcRfMuLocationingMaxMus OBJECT-TYPE SYNTAX Integer32 (0..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of MUs for MU locationing table." ::= { wsCcRfMuLocationing 4 } -- Time window in seconds to collect the MU probe requests for a MU-Radio pair -- -- 1.3.6.1.4.1.388.14.3.2.1.12.15.5 wsCcRfMuLocationingWindowTime OBJECT-TYPE SYNTAX Integer32 (10..60) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time window in seconds to collect the MU probe requests for a MU-Radio pair" ::= { wsCcRfMuLocationing 5 } -- Current number of MUs in the table. -- 1.3.6.1.4.1.388.14.3.2.1.12.15.6 wsCcRfMuLocationingNumMu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of MUs in the table." ::= { wsCcRfMuLocationing 6 } -- Erase the MU locationing Table. -- 1.3.6.1.4.1.388.14.3.2.1.12.15.7 wsCcRfMuLocationingClear OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Erase the MU locationing Table." ::= { wsCcRfMuLocationing 7 } -- 1.3.6.1.4.1.388.14.3.2.1.12.16 wsCcRfMuRateLimiting OBJECT IDENTIFIER ::= { wsCcRfMus 16 } -- 1.3.6.1.4.1.388.14.3.2.1.12.16.1 wsCcRfMuRateLimitingUp OBJECT-TYPE SYNTAX INTEGER (0 | 100..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit in uplink direction, from wireless client to network. The rate is in the range of <100-1,000,000> kbps. The value 0 means that rate limiting is disabled." ::= { wsCcRfMuRateLimiting 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.16.2 wsCcRfMuRateLimitingDown OBJECT-TYPE SYNTAX INTEGER (0 | 100..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit in downlink direction, from network to wireless client. The rate is in the range of <100-1,000,000> kbps. The value 0 means that rate limiting is disabled." ::= { wsCcRfMuRateLimiting 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.17 wsCcRfMuLoadBalancingMethod OBJECT-TYPE SYNTAX INTEGER { disable(0), byCount(1), byThroughput(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mobile unit load balancing method. disable : load balancing disabled byCount : by mobile unit count byThroughput : by radio throughput" ::= { wsCcRfMus 17 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18 wsCcRfMuVoiceCallTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuVoiceCallEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the status objects for active calls in voice-capable MUs serviced by the switch. This table is an expansion table of wsCcRfMuTable. Multiple row instances in this table correspond to a single row instance in wsCcRfMuTable when wsCcRfMuVoiceActive has the value true (1). Hence the relationship of rows this table with the rows in wsCcRfMuTable is sparse." ::= { wsCcRfMus 18 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1 wsCcRfMuVoiceCallEntry OBJECT-TYPE SYNTAX WsCcRfMuVoiceCallEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfMuVoiceCallMac, wsCcRfMuVoiceCallIndex } ::= { wsCcRfMuVoiceCallTable 1 } WsCcRfMuVoiceCallEntry ::= SEQUENCE { wsCcRfMuVoiceCallMac PhysAddress, wsCcRfMuVoiceCallIndex INTEGER, wsCcRfMuVoiceCallProtocol INTEGER, wsCcRfMuVoiceCallMediaProtocol INTEGER, wsCcRfMuVoiceCallState INTEGER, wsCcRfMuVoiceCallCodec DisplayString, wsCcRfMuVoiceCallQualityR INTEGER, wsCcRfMuVoiceCallQualityMoscq INTEGER, wsCcRfMuVoiceCallLostPackets Counter32, wsCcRfMuVoiceCallAvgJitter Unsigned32, wsCcRfMuVoiceCallAvgLatency Unsigned32, wsCcRfMuVoiceCallStartTime Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.1 wsCcRfMuVoiceCallMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MU MAC Address." ::= { wsCcRfMuVoiceCallEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.2 wsCcRfMuVoiceCallIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies a call in a voice-capable MU. wsCcRfMuMac and this object uniquely identify an entry in this table." ::= { wsCcRfMuVoiceCallEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.3 wsCcRfMuVoiceCallProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), sip(2), sccp(3), svp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol used. other : A protocol other than those defined below sip : SIP sccp : SCCP svp : Spectralink protocol" ::= { wsCcRfMuVoiceCallEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.4 wsCcRfMuVoiceCallMediaProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), rtp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The media protocol used. other : A protocol other than those defined below rtp : RTP" ::= { wsCcRfMuVoiceCallEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.5 wsCcRfMuVoiceCallState OBJECT-TYPE SYNTAX INTEGER { initializing(1), established(2), terminating(3), hold(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current call state. initializing : Call initializing established : Call established terminating : Call terminating hold : Call on hold" ::= { wsCcRfMuVoiceCallEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.6 wsCcRfMuVoiceCallCodec OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The codec used." ::= { wsCcRfMuVoiceCallEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.7 wsCcRfMuVoiceCallQualityR OBJECT-TYPE SYNTAX INTEGER (0..100 | 127) MAX-ACCESS read-only STATUS current DESCRIPTION "The voice call quality metric R factor. 0-100 : R factor 127 : R factor unavailable" ::= { wsCcRfMuVoiceCallEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.8 wsCcRfMuVoiceCallQualityMoscq OBJECT-TYPE SYNTAX INTEGER (10..50 | 127) MAX-ACCESS read-only STATUS current DESCRIPTION "The voice call quality metric Mean Opinion Score for Conversational Quality (MOS-CQ). 10-50 : MOS-CQ 127 : MOS-CQ unavailable" ::= { wsCcRfMuVoiceCallEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.9 wsCcRfMuVoiceCallLostPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of voice packets lost as observed by the switch since the beginning of the call." ::= { wsCcRfMuVoiceCallEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.10 wsCcRfMuVoiceCallAvgJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Average delay variation." ::= { wsCcRfMuVoiceCallEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.11 wsCcRfMuVoiceCallAvgLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Average path latency." ::= { wsCcRfMuVoiceCallEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.12.18.1.12 wsCcRfMuVoiceCallStartTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time when the call started. Expressed as number of seconds elapsed since UTC." ::= { wsCcRfMuVoiceCallEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19 wsCcRfMuLoadBalancing OBJECT IDENTIFIER ::= { wsCcRfMus 19 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.1 wsCcRfMuLoadBalancingCountThresh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "User count threshold for MU load balancing." ::= { wsCcRfMuLoadBalancing 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.2 wsCcRfMuLoadBalancingThroughputThresh OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Throughput threshold for MU load balancing." ::= { wsCcRfMuLoadBalancing 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3 wsCcRfMuLoadBalancingTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuLoadBalancingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the configuration objects for mobile unit load balancing." ::= { wsCcRfMuLoadBalancing 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3.1 wsCcRfMuLoadBalancingEntry OBJECT-TYPE SYNTAX WsCcRfMuLoadBalancingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfMuLoadBalancingMethodIndex } ::= { wsCcRfMuLoadBalancingTable 1 } WsCcRfMuLoadBalancingEntry ::= SEQUENCE { wsCcRfMuLoadBalancingMethodIndex INTEGER, wsCcRfMuLoadBalancingThresh Integer32, wsCcRfMuLoadBalancingThreshUnit DisplayString, wsCcRfMuLoadBalancingDiffThresh Integer32, wsCcRfMuLoadBalancingEnable TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3.1.1 wsCcRfMuLoadBalancingMethodIndex OBJECT-TYPE SYNTAX INTEGER { byCount(1), byThroughput(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mobile unit load balancing method. byCount : by mobile unit count byThroughput : by radio throughput" ::= { wsCcRfMuLoadBalancingEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3.1.2 wsCcRfMuLoadBalancingThresh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold value for the chosen load balance method. Load balance will not be initiated unless the load reaches this threshold. The range for threshold is as follows: Load balancing method Threshold range --------------------- --------------- byCount 0..10,000 byThroughput 0..1,000,000" ::= { wsCcRfMuLoadBalancingEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3.1.3 wsCcRfMuLoadBalancingThreshUnit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of thresholds." ::= { wsCcRfMuLoadBalancingEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3.1.4 wsCcRfMuLoadBalancingDiffThresh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold value to consider load being different. The range for threshold is as follows: Load balancing method Threshold range --------------------- --------------- byCount 1..10,000 byThroughput 1..1,000,000" ::= { wsCcRfMuLoadBalancingEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.12.19.3.1.5 wsCcRfMuLoadBalancingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable mobile unit load balancing." ::= { wsCcRfMuLoadBalancingEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.12.20 wsCcRfMuMaxCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of mobile units that can be associated at one time." ::= { wsCcRfMus 20 } -- 1.3.6.1.4.1.388.14.3.2.1.14 wsCcRfWlan OBJECT IDENTIFIER ::= { wsCcRfMIB 14 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1 wsCcRfWlanTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of wireless LANs on the switch." ::= { wsCcRfWlan 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1 wsCcRfWlanEntry OBJECT-TYPE SYNTAX WsCcRfWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanTable 1 } WsCcRfWlanEntry ::= SEQUENCE { wsCcRfWlanIndex Integer32, wsCcRfWlanEnable StaticRowEnable, wsCcRfWlanDescr DisplayString, wsCcRfWlanEssid DisplayString, wsCcRfWlanVlan Unsigned32, wsCcRfWlanDisallowMuToMu TruthValue, wsCcRfWlanSecBeacon TruthValue, wsCcRfWlanVoicePrioritization TruthValue, wsCcRfWlanAnswerBroadcastEss TruthValue, wsCcRfWlanMulticastAddr1 PhysAddress, wsCcRfWlanMulticastAddr2 PhysAddress, wsCcRfWlanWeight Integer32, wsCcRfWlanWmmEnable TruthValue, wsCcRfWlanSvpEnable TruthValue, wsCcRfWlanAuthentication AuthType, wsCcRfWlanEncryptionMap EncMap, wsCcRfWlanBcastEnc EncType, wsCcRfWlanNumRadiosAdopted Unsigned32, wsCcRfWlanUseDscp TruthValue, wsCcRfWlanMuIdleTime Integer32, wsCcRfWlanMobilityEnable TruthValue, wsCcRfWlanGRETunnelIdx INTEGER, wsCcRfWlanGRETunnelGatewayIp IpAddress, wsCcRfWlanGRETunnelGatewayMask IpAddress, wsCcRfWlanMuToMu INTEGER, wsCcRfWlanQosPrioritization INTEGER, wsCcRfWlanDynamicVlanAssignment TruthValue, wsCcRfWlanAccountingType INTEGER, wsCcRfWlanSyslogServerIp IpAddress, wsCcRfWlanSyslogServerPort Unsigned32, wsCcRfWlanNacMode INTEGER, wsCcRfWlanQosWeight INTEGER, wsCcRfWlanHoldTime INTEGER, wsCcRfWlanIndependentModeEnable TruthValue, wsCcRfWlanClientBridgeBackhaulEnable TruthValue, wsCcRfWlanHttpAlgEnable TruthValue, wsCcRfWlanRateLimitingUp Unsigned32, wsCcRfWlanRateLimitingDown Unsigned32, wsCcRfWlan80211wMFPCfgStatus INTEGER, wsCcRfWlanSAQueryMaxTimeout INTEGER, wsCcRfWlanSAQueryRetryTimeout INTEGER, wsCcRfWlanDot11iSha256Enabled TruthValue, wsCcRfWlanDenyStaticMUEnable TruthValue, wsCcRfWlanAltAuthentication INTEGER, wsCcRfWlanDot11Authentication INTEGER, wsCcRfWlanSecurity INTEGER, wsCcRfWlanAltEncryption INTEGER, wsCcRfWlanHotspotFailOverModeEnable TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.1 wsCcRfWlanIndex OBJECT-TYPE SYNTAX Integer32 (1..1001) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { wsCcRfWlanEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.2 wsCcRfWlanEnable OBJECT-TYPE SYNTAX StaticRowEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable wireless Lan. If this wlan is referenced by wsCcRfRadioBssWlanMap, a set to disabled mode will fail." ::= { wsCcRfWlanEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.3 wsCcRfWlanDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description the Wlan." ::= { wsCcRfWlanEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.4 wsCcRfWlanEssid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "ESSID of the WLAN." ::= { wsCcRfWlanEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.5 wsCcRfWlanVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The Vlan this Wlan is associated with. If not associated with any Vlan, this value will be 0. This object's functionality has now been replaced with wsCcRfWlanVlanTable, which allows to configure upto 32 VLANs per WLAN." ::= { wsCcRfWlanEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.6 wsCcRfWlanDisallowMuToMu OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set to true to prohibit MU-to-MU communication." ::= { wsCcRfWlanEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.7 wsCcRfWlanSecBeacon OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Secure Beacon checkbox to disallow the Access Port from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping into the WLAN. Consider this security measure for a private, corporate network." ::= { wsCcRfWlanEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.8 wsCcRfWlanVoicePrioritization OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable voice prioritization." ::= { wsCcRfWlanEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.9 wsCcRfWlanAnswerBroadcastEss OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Answer broadcast ESS." ::= { wsCcRfWlanEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.10 wsCcRfWlanMulticastAddr1 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast address 1." ::= { wsCcRfWlanEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.11 wsCcRfWlanMulticastAddr2 OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast address 2." ::= { wsCcRfWlanEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.12 wsCcRfWlanWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100. " ::= { wsCcRfWlanEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.13 wsCcRfWlanWmmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable WMM on this wireless LAN" ::= { wsCcRfWlanEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.14 wsCcRfWlanSvpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable support for Spectralink Voice Prioritization on this wireless LAN" ::= { wsCcRfWlanEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.15 wsCcRfWlanAuthentication OBJECT-TYPE SYNTAX AuthType MAX-ACCESS read-write STATUS current DESCRIPTION "If auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the wireless authentication. " ::= { wsCcRfWlanEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.16 wsCcRfWlanEncryptionMap OBJECT-TYPE SYNTAX EncMap MAX-ACCESS read-write STATUS current DESCRIPTION "** this needs to be a bitmap of enc types ** If cryptoWep64 or cryptoWep128, additional WEP settings for this WLAN will be used from the matching entry in the ccWlanCryptoWepTable. Likewise, if cryptoWpaTkip, use the settings in the matching entry in the ccWlanCryptoWpaTable. Likewise, if cryptoKeyguardMcm, use the settings in the matching entry in the ccWlanCryptoKeyguardTable." ::= { wsCcRfWlanEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.17 wsCcRfWlanBcastEnc OBJECT-TYPE SYNTAX EncType MAX-ACCESS read-only STATUS current DESCRIPTION "The broadcast encryption type in use on a WLAN. In most cases it is same as the unicast encryption type. When multiple encryption types are supported (TKIP+CCMP) it is usually the lowest encryption type." ::= { wsCcRfWlanEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.18 wsCcRfWlanNumRadiosAdopted OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of radios adopted." ::= { wsCcRfWlanEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.19 wsCcRfWlanUseDscp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use Dscp when tagged." ::= { wsCcRfWlanEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.20 wsCcRfWlanMuIdleTime OBJECT-TYPE SYNTAX Integer32 (60..86400) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds for which if the switch does not receive/send any data frames from/to an MU, it disassociates the MU. If an MU roams away from an access point without disassociating, this timeout helps the switch determine that the MU is gone, and clear resources allocated for that MU." ::= { wsCcRfWlanEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.21 wsCcRfWlanMobilityEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsCcRfWlanEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.22 wsCcRfWlanGRETunnelIdx OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Description." ::= { wsCcRfWlanEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.23 wsCcRfWlanGRETunnelGatewayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Description." ::= { wsCcRfWlanEntry 23 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.24 wsCcRfWlanGRETunnelGatewayMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Description." ::= { wsCcRfWlanEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.25 wsCcRfWlanMuToMu OBJECT-TYPE SYNTAX INTEGER { drop(1), allow(2), switchToWired(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "States the mode of operation for MU-to-MU communications in the wireless switch. drop(1): traffic is not relayed to other MUs. allow(2): traffic is relayed to other MUs. The value switchToWired(3) is deprecated. Using switchToWired(3) is identical in behavior to the value allow(2)." ::= { wsCcRfWlanEntry 25 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.26 wsCcRfWlanQosPrioritization OBJECT-TYPE SYNTAX INTEGER { autoWmm(1), voice(2), video(3), normal(4), low(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the prioritization of the WLAN for QoS purposes." ::= { wsCcRfWlanEntry 26 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.27 wsCcRfWlanDynamicVlanAssignment OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables dynamic VLAN assignment for the WLAN." ::= { wsCcRfWlanEntry 27 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.28 wsCcRfWlanAccountingType OBJECT-TYPE SYNTAX INTEGER { off(1), radius(2), syslog(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if the accounting type is Radius, Syslog or turned off." ::= { wsCcRfWlanEntry 28 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.29 wsCcRfWlanSyslogServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the Syslog server" ::= { wsCcRfWlanEntry 29 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.30 wsCcRfWlanSyslogServerPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port of the Syslog Server" ::= { wsCcRfWlanEntry 30 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.31 wsCcRfWlanNacMode OBJECT-TYPE SYNTAX INTEGER { doNacExceptExcludeList(1), bypassNacExceptIncludeList(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set NAC mode to 1. Do NAC validation for all MU's except one in exclude list 2. By pass NAC validation for all MU's but include those that are in include list 3. No NAC operation. Go thru RADIUS server if authentication is set to EAP" ::= { wsCcRfWlanEntry 31 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.32 wsCcRfWlanQosWeight OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the weight of a WLAN." DEFVAL { 1 } ::= { wsCcRfWlanEntry 32 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.33 wsCcRfWlanHoldTime OBJECT-TYPE SYNTAX INTEGER (1..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Hold time in seconds. The user credentials would hold for this much time when it leaves or roams away." ::= { wsCcRfWlanEntry 33 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.34 wsCcRfWlanIndependentModeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, it means that the Independent mode for this WLAN is enabled. That allows it to be used by AAPs. A false value means that the WLAN is in 'regular' mode and cannot be used for AAPs." ::= { wsCcRfWlanEntry 34 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.35 wsCcRfWlanClientBridgeBackhaulEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable client bridge backhaul. Requires wsCcRfWlanIndependentModeEnable to be True for this flag to be enabled." ::= { wsCcRfWlanEntry 35 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.36 wsCcRfWlanHttpAlgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable the HTTP ALG for this WLAN. Setting this object to true enables the HTTP ALG for the WLAN. Setting it to false disables the HTTP ALG for the WLAN." ::= { wsCcRfWlanEntry 36 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.37 wsCcRfWlanRateLimitingUp OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit in uplink direction, from wireless client to network. The rate is per wireless client and is in the range of <100-1,000,000> kbps. If both wsCcRfWlanRateLimitingUp and wsCcRfWlanRateLimitingDown are 0, it means use the global rate limit available in wsCcRfMuRateLimitingUp and wsCcRfMuRateLimitingDown. If either wsCcRfWlanRateLimitingUp or wsCcRfWlanRateLimitingDown is set, it means the other is unlimited." ::= { wsCcRfWlanEntry 37 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.38 wsCcRfWlanRateLimitingDown OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit in downlink direction, from network to wireless client. The rate is per wireless client and is in the range of <100-1,000,000> kbps. If both wsCcRfWlanRateLimitingUp and wsCcRfWlanRateLimitingDown are 0, it means use the global rate limit available in wsCcRfMuRateLimitingUp and wsCcRfMuRateLimitingDown. If either wsCcRfWlanRateLimitingUp or wsCcRfWlanRateLimitingDown is set, it means the other is unlimited." ::= { wsCcRfWlanEntry 38 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.39 wsCcRfWlan80211wMFPCfgStatus OBJECT-TYPE SYNTAX INTEGER { none(1), optional(2), required(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Management Frame Protection (MFP) configuration status for this WLAN. It can be set to: none(1), optional(2) or required(3). The default setting for MFP is none(1). MFP setting can be set to either optional(2) or required(3) only when CCMP encryption is used." DEFVAL { none } ::= { wsCcRfWlanEntry 39 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.40 wsCcRfWlanSAQueryMaxTimeout OBJECT-TYPE SYNTAX INTEGER (100..6000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies SA query maximum timeout in milliseconds. The default setting for max-timeout is . This setting is only valid when wsCcRfWlanMFPCfgStatus is either optional or required." DEFVAL { 1000 } ::= { wsCcRfWlanEntry 40 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.41 wsCcRfWlanSAQueryRetryTimeout OBJECT-TYPE SYNTAX INTEGER (10..1500) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies SA query retry timeout in milliseconds. The default setting for retry-timeout is . This setting is only valid when wsCcRfWlanMFPCfgStatus is either optional or required." DEFVAL { 201 } ::= { wsCcRfWlanEntry 41 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.42 wsCcRfWlanDot11iSha256Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Setting it to true(1) enables SHA-256 based stronger key generation algorithm to be used. This object is intended for future use, and is not-accessible for now." DEFVAL { false } ::= { wsCcRfWlanEntry 42 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.43 wsCcRfWlanDenyStaticMUEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true enables dropping of packets from mobile-units not present in L3 extended ACL table. If DHCP is enforced on the WLAN, and a mobile-unit has a static IP address, then the packets from the mobile-unit will be dropped if wsCcRfWlanDenyStaticMUEnable is set to true. If DHCP is enforced on the WLAN, and a mobile-unit is a DHCP client, then the traffic from the MU will be passed only if it belongs to the permit rule of an L3 extended ACL." DEFVAL { false } ::= { wsCcRfWlanEntry 43 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.44 wsCcRfWlanAltAuthentication OBJECT-TYPE SYNTAX INTEGER { none(1), psk(2), radius(3), wapiCert(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alternate object for WLAN authentication method. wsCcRfWlanAltEncryption must have the required value before setting this object." ::= { wsCcRfWlanEntry 44 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.45 wsCcRfWlanDot11Authentication OBJECT-TYPE SYNTAX INTEGER { openSystem(1), sharedKey(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication algorithm." ::= { wsCcRfWlanEntry 45 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.46 wsCcRfWlanSecurity OBJECT-TYPE SYNTAX INTEGER { none(1), wpa(2), wpa2(3), wapi(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Security method." ::= { wsCcRfWlanEntry 46 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.47 wsCcRfWlanAltEncryption OBJECT-TYPE SYNTAX INTEGER { none(1), wep40(2), tkip(3), aesCcmp(4), wep104(5), wapi(6), wpaWpa2(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alternate object for WLAN authentication method." ::= { wsCcRfWlanEntry 47 } -- 1.3.6.1.4.1.388.14.3.2.1.14.1.1.48 wsCcRfWlanHotspotFailOverModeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Hotspot fail over mode for wlan." ::= { wsCcRfWlanEntry 48 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2 wsCcRfWlanAuth OBJECT IDENTIFIER ::= { wsCcRfWlan 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1 wsCcRfWlanAuthEapTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanAuthEapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of EAP authentication settings for each WLAN." ::= { wsCcRfWlanAuth 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1 wsCcRfWlanAuthEapEntry OBJECT-TYPE SYNTAX WsCcRfWlanAuthEapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanAuthEapTable 1 } WsCcRfWlanAuthEapEntry ::= SEQUENCE { wsCcRfWlanAuthEapRadiusServerIp1 IpAddress, wsCcRfWlanAuthEapRadiusServerPort1 Integer32, wsCcRfWlanAuthEapRadiusServerSecret1 Password, wsCcRfWlanAuthEapRadiusServerIp2 IpAddress, wsCcRfWlanAuthEapRadiusServerPort2 Integer32, wsCcRfWlanAuthEapRadiusServerSecret2 Password, wsCcRfWlanAuthEapSuppRetries Integer32, wsCcRfWlanAuthEapSuppTimeout Integer32, wsCcRfWlanAuthEapServerRetries Integer32, wsCcRfWlanAuthEapServerTimeout Integer32, wsCcRfWlanAuthEapReauth TruthValue, wsCcRfWlanAuthEapReauthTimeout Integer32, wsCcRfWlanAuthEapAuthProtocol INTEGER, wsCcRfWlanAuthEapDscpTos INTEGER, wsCcRfWlanAuthEapAccountingMode INTEGER, wsCcRfWlanAuthEapInterimAcctInterval Unsigned32, wsCcRfWlanAuthEapAcctTimeout Unsigned32, wsCcRfWlanAuthEapAcctRetries Unsigned32, wsCcRfWlanAuthPrimaryServer IpAddress, wsCcRfWlanAuthEapSecondaryServer IpAddress, wsCcRfWlanAuthEapPrimarySrvrPort Unsigned32, wsCcRfWlanAuthEapSecondarySrvrPort Unsigned32, wsCcRfWlanAuthEapPrimarySecret DisplayString, wsCcRfWlanAuthEapSecondarySecret DisplayString, wsCcRfWlanAuthEapRadiusMacAuthFormat INTEGER, wsCcRfWlanAuthEapAapProxyRadiusEnable TruthValue, wsCcRfWlanAuthEapRadiusDynamicAuthEnable TruthValue, wsCcRfWlanAuthEapAapProxyRealm DisplayString, wsCcRfWlanAuthEapAapProxyRealmStripEnable TruthValue, wsCcRfWlanAuthEapRadiusMACInCaps TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.1 wsCcRfWlanAuthEapRadiusServerIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the 1st RADIUS server." ::= { wsCcRfWlanAuthEapEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.2 wsCcRfWlanAuthEapRadiusServerPort1 OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the 1st RADIUS server." ::= { wsCcRfWlanAuthEapEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.3 wsCcRfWlanAuthEapRadiusServerSecret1 OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the 1st RADIUS server." ::= { wsCcRfWlanAuthEapEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.4 wsCcRfWlanAuthEapRadiusServerIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the 2nd RADIUS server." ::= { wsCcRfWlanAuthEapEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.5 wsCcRfWlanAuthEapRadiusServerPort2 OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the 2nd RADIUS server." ::= { wsCcRfWlanAuthEapEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.6 wsCcRfWlanAuthEapRadiusServerSecret2 OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the 2nd RADIUS server." ::= { wsCcRfWlanAuthEapEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.7 wsCcRfWlanAuthEapSuppRetries OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Supplicant max retries." ::= { wsCcRfWlanAuthEapEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.8 wsCcRfWlanAuthEapSuppTimeout OBJECT-TYPE SYNTAX Integer32 (1..300) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Supplicant timeout." ::= { wsCcRfWlanAuthEapEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.9 wsCcRfWlanAuthEapServerRetries OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Server max retries." ::= { wsCcRfWlanAuthEapEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.10 wsCcRfWlanAuthEapServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..300) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Server timeout." ::= { wsCcRfWlanAuthEapEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.11 wsCcRfWlanAuthEapReauth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable reauthentication." ::= { wsCcRfWlanAuthEapEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.12 wsCcRfWlanAuthEapReauthTimeout OBJECT-TYPE SYNTAX Integer32 (30..65535) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Reauthentication timeout." ::= { wsCcRfWlanAuthEapEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.13 wsCcRfWlanAuthEapAuthProtocol OBJECT-TYPE SYNTAX INTEGER { pap(1), chap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication protocol to be used, PAP or CHAP." ::= { wsCcRfWlanAuthEapEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.14 wsCcRfWlanAuthEapDscpTos OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "DSCP or TOS value to be used (between 0 and 63)." ::= { wsCcRfWlanAuthEapEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.15 wsCcRfWlanAuthEapAccountingMode OBJECT-TYPE SYNTAX INTEGER { startStop(1), stopOnly(2), startInterimStop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if mode of accounting is one of: Start-Stop, Start-only or Start-interim-Stop" ::= { wsCcRfWlanAuthEapEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.16 wsCcRfWlanAuthEapInterimAcctInterval OBJECT-TYPE SYNTAX Unsigned32 (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval for interim accounting" ::= { wsCcRfWlanAuthEapEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.17 wsCcRfWlanAuthEapAcctTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout value for accounting option" ::= { wsCcRfWlanAuthEapEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.18 wsCcRfWlanAuthEapAcctRetries OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of accounting retries" ::= { wsCcRfWlanAuthEapEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.19 wsCcRfWlanAuthPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the Primary Accounting Server" ::= { wsCcRfWlanAuthEapEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.20 wsCcRfWlanAuthEapSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the Secondary Accounting Server" ::= { wsCcRfWlanAuthEapEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.21 wsCcRfWlanAuthEapPrimarySrvrPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Number of the Primary Server" ::= { wsCcRfWlanAuthEapEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.22 wsCcRfWlanAuthEapSecondarySrvrPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Number of the Secondary Server" ::= { wsCcRfWlanAuthEapEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.23 wsCcRfWlanAuthEapPrimarySecret OBJECT-TYPE SYNTAX DisplayString (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the Primary Accounting server." ::= { wsCcRfWlanAuthEapEntry 23 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.24 wsCcRfWlanAuthEapSecondarySecret OBJECT-TYPE SYNTAX DisplayString (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the Secondary Accounting server." ::= { wsCcRfWlanAuthEapEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.25 wsCcRfWlanAuthEapRadiusMacAuthFormat OBJECT-TYPE SYNTAX INTEGER { noDelim(1), pairColon(2), pairDash(3), quadDot(4), middleDash(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the MAC address to be sent to a RADIUS server when using MAC authentication: no-delim: No Delimiter - AABBCCDDEEFF pair-colon: Colon Delmilter per Pair - AA:BB:CC:DD:EE:FF pair-dash: Dash Delimiter per Pair - AA-BB-CC-DD-EE-FF quad-dot: Dot Delimiter per Four Hex - AABB.CCDD.EEFF middle-dash: Dash Delmiter in the middle - AABBCC-DDEEFF" ::= { wsCcRfWlanAuthEapEntry 25 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.26 wsCcRfWlanAuthEapAapProxyRadiusEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable proxying AAP radius requests." DEFVAL { false } ::= { wsCcRfWlanAuthEapEntry 26 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.27 wsCcRfWlanAuthEapRadiusDynamicAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable support for Radius Dynamic Authorization extensions such as Disconnect Message, and Change-Of-Authorization, as described in RFC 3576" ::= { wsCcRfWlanAuthEapEntry 27 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.28 wsCcRfWlanAuthEapAapProxyRealm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "AAP proxy realm name." ::= { wsCcRfWlanAuthEapEntry 28 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.29 wsCcRfWlanAuthEapAapProxyRealmStripEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Strip realm name while proxying requests." DEFVAL { false } ::= { wsCcRfWlanAuthEapEntry 29 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.30 wsCcRfWlanAuthEapRadiusMACInCaps OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address In Capitals" DEFVAL { false } ::= { wsCcRfWlanAuthEapEntry 30 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2 wsCcRfWlanAuthKerberosTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanAuthKerberosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Kerberos authentication settings for each WLAN." ::= { wsCcRfWlanAuth 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1 wsCcRfWlanAuthKerberosEntry OBJECT-TYPE SYNTAX WsCcRfWlanAuthKerberosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanAuthKerberosTable 1 } WsCcRfWlanAuthKerberosEntry ::= SEQUENCE { wsCcRfwlanAuthKerbRealm DisplayString, wsCcRfWlanAuthKerbPassword Password, wsCcRfWlanAuthKerbKdcServerIp1 IpAddress, wsCcRfWlanAuthKerbKdcServerPort1 Integer32, wsCcRfWlanAuthKerbKdcServerIp2 IpAddress, wsCcRfWlanAuthKerbKdcServerPort2 Integer32, wsCcRfWlanAuthKerberosServerTimeout Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.1 wsCcRfwlanAuthKerbRealm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Realm name. A realm name functions similarly to a DNS domain name. In theory, the realm name is arbitrary. However, in practice a Kerberos realm is named by uppercasing the DNS domain name that is associated with hosts in the realm." ::= { wsCcRfWlanAuthKerberosEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.2 wsCcRfWlanAuthKerbPassword OBJECT-TYPE SYNTAX Password (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the Kerberos configuration." ::= { wsCcRfWlanAuthKerberosEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.3 wsCcRfWlanAuthKerbKdcServerIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the 1st Kerberos server." ::= { wsCcRfWlanAuthKerberosEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.4 wsCcRfWlanAuthKerbKdcServerPort1 OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the 1st Kerberos server." ::= { wsCcRfWlanAuthKerberosEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.5 wsCcRfWlanAuthKerbKdcServerIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the 2nd Kerberos server." ::= { wsCcRfWlanAuthKerberosEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.6 wsCcRfWlanAuthKerbKdcServerPort2 OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the 2nd Kerberos server." ::= { wsCcRfWlanAuthKerberosEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.7 wsCcRfWlanAuthKerberosServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsCcRfWlanAuthKerberosEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3 wsCcRfWlanAuthEapNACServerTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanAuthEapNACServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Exclude lists EAP authentication settings for each WLAN." ::= { wsCcRfWlanAuth 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1 wsCcRfWlanAuthEapNACServerEntry OBJECT-TYPE SYNTAX WsCcRfWlanAuthEapNACServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanAuthEapNACServerTable 1 } WsCcRfWlanAuthEapNACServerEntry ::= SEQUENCE { wsCcRfWlanAuthEapNACServerIp1 IpAddress, wsCcRfWlanAuthEapNACServerPort1 INTEGER, wsCcRfWlanAuthEapNACServerSecret1 Password, wsCcRfWlanAuthEapNACServerIp2 IpAddress, wsCcRfWlanAuthEapNACServerPort2 INTEGER, wsCcRfWlanAuthEapNACServerSecret2 Password, wsCcRfWlanAuthEapNACServerRetries Integer32, wsCcRfWlanAuthEapNACServerTimeout Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.1 wsCcRfWlanAuthEapNACServerIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the 1st NAC server." ::= { wsCcRfWlanAuthEapNACServerEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.2 wsCcRfWlanAuthEapNACServerPort1 OBJECT-TYPE SYNTAX INTEGER (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the 1st NAC server." ::= { wsCcRfWlanAuthEapNACServerEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.3 wsCcRfWlanAuthEapNACServerSecret1 OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the 1st NAC server." ::= { wsCcRfWlanAuthEapNACServerEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.4 wsCcRfWlanAuthEapNACServerIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the 2nd NAC server." ::= { wsCcRfWlanAuthEapNACServerEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.5 wsCcRfWlanAuthEapNACServerPort2 OBJECT-TYPE SYNTAX INTEGER (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the 2nd NAC server." ::= { wsCcRfWlanAuthEapNACServerEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.6 wsCcRfWlanAuthEapNACServerSecret2 OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the 2nd NAC server." ::= { wsCcRfWlanAuthEapNACServerEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.7 wsCcRfWlanAuthEapNACServerRetries OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Server max retries." ::= { wsCcRfWlanAuthEapNACServerEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.8 wsCcRfWlanAuthEapNACServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..300) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Server timeout." ::= { wsCcRfWlanAuthEapNACServerEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.4 wsCcRfWlanAuthMethodSupportedTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanAuthMethodSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of WLAN authentication methods supported." ::= { wsCcRfWlanAuth 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.4.1 wsCcRfWlanAuthMethodSupportedEntry OBJECT-TYPE SYNTAX WsCcRfWlanAuthMethodSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfWlanAuthMethodSupportedIndex } ::= { wsCcRfWlanAuthMethodSupportedTable 1 } WsCcRfWlanAuthMethodSupportedEntry ::= SEQUENCE { wsCcRfWlanAuthMethodSupportedIndex INTEGER, wsCcRfWlanAuthMethodSupportedName DisplayString } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.4.1.1 wsCcRfWlanAuthMethodSupportedIndex OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Small, arbitrary integer index." ::= { wsCcRfWlanAuthMethodSupportedEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.2.4.1.2 wsCcRfWlanAuthMethodSupportedName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The supported WLAN authentication method's name." ::= { wsCcRfWlanAuthMethodSupportedEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3 wsCcRfWlanEnc OBJECT IDENTIFIER ::= { wsCcRfWlan 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.1 wsCcRfWlanEncSkEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable Wlan encryption shared-key" ::= { wsCcRfWlanEnc 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2 wsCcRfWlanEncWep64Table OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanEncWep64Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of WEP encryption settings for each WLAN." ::= { wsCcRfWlanEnc 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2.1 wsCcRfWlanEncWep64Entry OBJECT-TYPE SYNTAX WsCcRfWlanEncWep64Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanEncWep64Table 1 } WsCcRfWlanEncWep64Entry ::= SEQUENCE { wsCcRfWlanEncWep64KeyIndex Unsigned32, wsCcRfWlanEncWep64Key1 OCTET STRING, wsCcRfWlanEncWep64Key2 OCTET STRING, wsCcRfWlanEncWep64Key3 OCTET STRING, wsCcRfWlanEncWep64Key4 OCTET STRING } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.1 wsCcRfWlanEncWep64KeyIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies which WEP key to use." ::= { wsCcRfWlanEncWep64Entry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.2 wsCcRfWlanEncWep64Key1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #1 exactly 5 octets for WEP-64 (40-bit key)." ::= { wsCcRfWlanEncWep64Entry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.3 wsCcRfWlanEncWep64Key2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #2 exactly 5 octets for WEP-64 (40-bit key)." ::= { wsCcRfWlanEncWep64Entry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.4 wsCcRfWlanEncWep64Key3 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #3 exactly 5 octets for WEP-64 (40-bit key)." ::= { wsCcRfWlanEncWep64Entry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.5 wsCcRfWlanEncWep64Key4 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #4 exactly 5 octets for WEP-64 (40-bit key)." ::= { wsCcRfWlanEncWep64Entry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3 wsCcRfWlanEncWep128KgTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanEncWep128KgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of WEP encryption settings for each WLAN." ::= { wsCcRfWlanEnc 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3.1 wsCcRfWlanEncWep128KgEntry OBJECT-TYPE SYNTAX WsCcRfWlanEncWep128KgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanEncWep128KgTable 1 } WsCcRfWlanEncWep128KgEntry ::= SEQUENCE { wsCcRfWlanEncWep128KgKeyIndex Unsigned32, wsCcRfWlanEncWep128KgKey1 OCTET STRING, wsCcRfWlanEncWep128KgKey2 OCTET STRING, wsCcRfWlanEncWep128KgKey3 OCTET STRING, wsCcRfWlanEncWep128KgKey4 OCTET STRING } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.1 wsCcRfWlanEncWep128KgKeyIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies which WEP key to use." ::= { wsCcRfWlanEncWep128KgEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.2 wsCcRfWlanEncWep128KgKey1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #1 exactly 13 octets for WEP-128 (104-bit key); " ::= { wsCcRfWlanEncWep128KgEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.3 wsCcRfWlanEncWep128KgKey2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #2 exactly 13 octets for WEP-128 (104-bit key); " ::= { wsCcRfWlanEncWep128KgEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.4 wsCcRfWlanEncWep128KgKey3 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #3 exactly 13 octets for WEP-128 (104-bit key); " ::= { wsCcRfWlanEncWep128KgEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.5 wsCcRfWlanEncWep128KgKey4 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key #4 exactly 13 octets for WEP-128 (104-bit key); " ::= { wsCcRfWlanEncWep128KgEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4 wsCcRfWlanEncTkipCcmpTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanEncTkipCcmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Tkip/Ccmp encryption settings for each WLAN." ::= { wsCcRfWlanEnc 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1 wsCcRfWlanEncTkipCcmpEntry OBJECT-TYPE SYNTAX WsCcRfWlanEncTkipCcmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanEncTkipCcmpTable 1 } WsCcRfWlanEncTkipCcmpEntry ::= SEQUENCE { wsCcRfWlanEncTkipCcmpKeyType INTEGER, wsCcRfWlanEncTkipCcmpPassphrase Password, wsCcRfWlanEncTkipCcmpKey OCTET STRING, wsCcRfWlanEncTkipCcmpKeyRotation TruthValue, wsCcRfWlanEncTkipCcmpKeyInterval Integer32, wsCcRfWlanEncTkipCcmpPmkCaching TruthValue, wsCcRfWlanEncTkipCcmpOppPmkCaching TruthValue, wsCcRfWlanEncTkipCcmpPreauthentication TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.1 wsCcRfWlanEncTkipCcmpKeyType OBJECT-TYPE SYNTAX INTEGER { key(1), passphrase(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether to use key or passphrase." ::= { wsCcRfWlanEncTkipCcmpEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.2 wsCcRfWlanEncTkipCcmpPassphrase OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "Passphrase." ::= { wsCcRfWlanEncTkipCcmpEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.3 wsCcRfWlanEncTkipCcmpKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Key." ::= { wsCcRfWlanEncTkipCcmpEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.4 wsCcRfWlanEncTkipCcmpKeyRotation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " A truth-value that indicates whether the group key for a TKIP/CCMP mobile-unit should be periodically rotated." ::= { wsCcRfWlanEncTkipCcmpEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.5 wsCcRfWlanEncTkipCcmpKeyInterval OBJECT-TYPE SYNTAX Integer32 (30..86400) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds after which the broadcast key of all mobile-units on a particular wireless lan is replaced by a new broadcast key." ::= { wsCcRfWlanEncTkipCcmpEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.6 wsCcRfWlanEncTkipCcmpPmkCaching OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether IEEE 802.11i PMK caching is enabled. Use of PMK caching allows a mobile-unit to authenticate just once to an AP, even if it roams away from it, and roams back to it. Enabling this feature results in much faster roam times on wireless LANs that use 802.1x authentication." ::= { wsCcRfWlanEncTkipCcmpEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.7 wsCcRfWlanEncTkipCcmpOppPmkCaching OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether extensions to IEEE 802.11i PMK caching, known as opportunistic PMK caching, are enabled. It extends PMK caching (authenticate once to an AP) to the whole switch (authenticate once to a switch). Enabling this feature results in much faster roam times on wireless LANs that use 802.1x authentication" ::= { wsCcRfWlanEncTkipCcmpEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.8 wsCcRfWlanEncTkipCcmpPreauthentication OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether pre-authentication is enabled." ::= { wsCcRfWlanEncTkipCcmpEntry 8 } -- A utility mib group used to generate wep keys from -- a passphrase. -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5 wsCcRfWlanEncPhraseToWep OBJECT IDENTIFIER ::= { wsCcRfWlanEnc 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5.1 wsCcRfWlanEncP2WPassphrase OBJECT-TYPE SYNTAX DisplayString (SIZE (4..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "An input to an algorithm used to convert ascii into wep keys." ::= { wsCcRfWlanEncPhraseToWep 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5.2 wsCcRfWlanEncP2WKey1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Generated Wep128 key #1." ::= { wsCcRfWlanEncPhraseToWep 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5.3 wsCcRfWlanEncP2WKey2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Generated Wep128 key #2." ::= { wsCcRfWlanEncPhraseToWep 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5.4 wsCcRfWlanEncP2WKey3 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Generated Wep128 key #3." ::= { wsCcRfWlanEncPhraseToWep 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5.5 wsCcRfWlanEncP2WKey4 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Generated Wep128 key #4." ::= { wsCcRfWlanEncPhraseToWep 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.5.6 wsCcRfWlanEncP2WClearKeys OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this scalar to 1 will clear all wep key fields." ::= { wsCcRfWlanEncPhraseToWep 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.6 wsCcRfWlanEncAltWepTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanEncAltWepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alternate table of WEP encryption settings for each WLAN." ::= { wsCcRfWlanEnc 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.6.1 wsCcRfWlanEncAltWepEntry OBJECT-TYPE SYNTAX WsCcRfWlanEncAltWepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanEncAltWepTable 1 } WsCcRfWlanEncAltWepEntry ::= SEQUENCE { wsCcRfWlanEncAltWepKeyIndex INTEGER, wsCcRfWlanEncAltWepKeyType INTEGER, wsCcRfWlanEncAltWepKeyValue OCTET STRING } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.6.1.1 wsCcRfWlanEncAltWepKeyIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP key index to use." ::= { wsCcRfWlanEncAltWepEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.6.1.2 wsCcRfWlanEncAltWepKeyType OBJECT-TYPE SYNTAX INTEGER { char(1), hex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Key type. char : The key is ASCII string and will be converted into WEP key hex : The key is either 5 octet WEP-64 key or 13 octet WEP-128 key" ::= { wsCcRfWlanEncAltWepEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.3.6.1.3 wsCcRfWlanEncAltWepKeyValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The key value. It is an ASCII string or exact length WEP key." ::= { wsCcRfWlanEncAltWepEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.4 wsCcRfWlanWmmTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanWmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network" ::= { wsCcRfWlan 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.4.1 wsCcRfWlanWmmEntry OBJECT-TYPE SYNTAX WsCcRfWlanWmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfWlanWmmTable 1 } WsCcRfWlanWmmEntry ::= SEQUENCE { wsCcRfWlanWmmBeParm WlanWmmConfig, wsCcRfWlanWmmBkParm WlanWmmConfig, wsCcRfWlanWmmViParm WlanWmmConfig, wsCcRfWlanWmmVoParm WlanWmmConfig } -- 1.3.6.1.4.1.388.14.3.2.1.14.4.1.1 wsCcRfWlanWmmBeParm OBJECT-TYPE SYNTAX WlanWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Best Effort QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfWlanWmmEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.4.1.2 wsCcRfWlanWmmBkParm OBJECT-TYPE SYNTAX WlanWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Background QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfWlanWmmEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.4.1.3 wsCcRfWlanWmmViParm OBJECT-TYPE SYNTAX WlanWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Video QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfWlanWmmEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.4.1.4 wsCcRfWlanWmmVoParm OBJECT-TYPE SYNTAX WlanWmmConfig MAX-ACCESS read-write STATUS current DESCRIPTION "Parameters for the Voice QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value." ::= { wsCcRfWlanWmmEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.5 wsCcRfWlanCount OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "the current number of wlan in the system" ::= { wsCcRfWlan 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.6 wsCcRfWlanClientIncludeListTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanClientIncludeListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for Include lists and hosts. The host entries existing in this list will go through NAC check if this client include list name is added into WLAN." ::= { wsCcRfWlan 6 } -- 1.3.6.1.4.1.388.14.3.2.1.14.6.1 wsCcRfWlanClientIncludeListEntry OBJECT-TYPE SYNTAX WsCcRfWlanClientIncludeListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Include list and host entry contains information about host mac address and mac mask to include for NAC status check." INDEX { wsCcRfWlanClientIncludeListName, wsCcRfWlanClientIncludeListHostName } ::= { wsCcRfWlanClientIncludeListTable 1 } WsCcRfWlanClientIncludeListEntry ::= SEQUENCE { wsCcRfWlanClientIncludeListName DisplayString, wsCcRfWlanClientIncludeListHostName DisplayString, wsCcRfWlanClientIncludeListMAC PhysAddress, wsCcRfWlanClientIncludeListMACMask PhysAddress, wsCcRfWlanClientIncludeListRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.14.6.1.1 wsCcRfWlanClientIncludeListName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indexed by Include List Names." ::= { wsCcRfWlanClientIncludeListEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.6.1.2 wsCcRfWlanClientIncludeListHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..21)) MAX-ACCESS read-only STATUS current DESCRIPTION "String index of Mu host names for the WlanClientIncludeListTable." ::= { wsCcRfWlanClientIncludeListEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.6.1.3 wsCcRfWlanClientIncludeListMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Host MAC address. This is a MAC address of the Mobile Units. Example: 00:0A:12:34:BE:OF" ::= { wsCcRfWlanClientIncludeListEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.6.1.4 wsCcRfWlanClientIncludeListMACMask OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Host end MAC address. This field is used to specify the range of MAC addresses. Example: 00:0A:12:34:BE:FF" ::= { wsCcRfWlanClientIncludeListEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.6.1.5 wsCcRfWlanClientIncludeListRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create or Delete a row from Include list Table." ::= { wsCcRfWlanClientIncludeListEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.7 wsCcRfWlanClientExcludeListTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanClientExcludeListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for Exclude lists and hosts. The host entries existing in this list will not go through NAC check if its associated to the particular WLAN." ::= { wsCcRfWlan 7 } -- 1.3.6.1.4.1.388.14.3.2.1.14.7.1 wsCcRfWlanClientExcludeListEntry OBJECT-TYPE SYNTAX WsCcRfWlanClientExcludeListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Exclude list and host entry contains information about host mac address and mac mask to exclude from NAC operation." INDEX { wsCcRfWlanClientExcludeListName, wsCcRfWlanClientExcludeListHostName } ::= { wsCcRfWlanClientExcludeListTable 1 } WsCcRfWlanClientExcludeListEntry ::= SEQUENCE { wsCcRfWlanClientExcludeListName DisplayString, wsCcRfWlanClientExcludeListHostName DisplayString, wsCcRfWlanClientExcludeListMAC PhysAddress, wsCcRfWlanClientExcludeListMACMask PhysAddress, wsCcRfWlanClientExcludeListRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.14.7.1.1 wsCcRfWlanClientExcludeListName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indexed by Exclude List Names." ::= { wsCcRfWlanClientExcludeListEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.7.1.2 wsCcRfWlanClientExcludeListHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..21)) MAX-ACCESS read-only STATUS current DESCRIPTION "String index of Mu host names for the WlanClientExcludeListTable." ::= { wsCcRfWlanClientExcludeListEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.7.1.3 wsCcRfWlanClientExcludeListMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Host MAC address. This is a MAC address of the Mobile Units. Example: 00:0A:12:34:BE:OF" ::= { wsCcRfWlanClientExcludeListEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.7.1.4 wsCcRfWlanClientExcludeListMACMask OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Host end MAC address. This field is used to specify the range of MAC addresses. Example: 00:0A:12:34:BE:FF" ::= { wsCcRfWlanClientExcludeListEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.14.7.1.5 wsCcRfWlanClientExcludeListRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create or Delete a row from Exclude list Table." ::= { wsCcRfWlanClientExcludeListEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.14.8 wsCcRfWlanClientListWlanMapTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanClientListWlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure wlan mapping for this client list. The list could be include or exclude list name." ::= { wsCcRfWlan 8 } -- 1.3.6.1.4.1.388.14.3.2.1.14.8.1 wsCcRfWlanClientListWlanMapEntry OBJECT-TYPE SYNTAX WsCcRfWlanClientListWlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table will allow the user to associate client exclude and include lists to each WLAN." INDEX { wsCcRfWlanClientListName } ::= { wsCcRfWlanClientListWlanMapTable 1 } WsCcRfWlanClientListWlanMapEntry ::= SEQUENCE { wsCcRfWlanClientListName DisplayString, wsCcRfWlanClientListWlanBitmap MultiPointer256 } -- 1.3.6.1.4.1.388.14.3.2.1.14.8.1.1 wsCcRfWlanClientListName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Client exclude and include list name(s). This is a read only index which will display all the exclude and include list names created before (in wsCcRfWlanClientIncludeListTable and wsCcRfWlanClientExcludeListTable)." ::= { wsCcRfWlanClientListWlanMapEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.8.1.2 wsCcRfWlanClientListWlanBitmap OBJECT-TYPE SYNTAX MultiPointer256 MAX-ACCESS read-write STATUS current DESCRIPTION "Adding client list (include and exclude list) to wlan(s). This is bitmap value (which is from 1 to maximum wlans ie., 1-256)." ::= { wsCcRfWlanClientListWlanMapEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.9 wsCcRfWlanVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWlanVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vlans assigned to parent Wlan" ::= { wsCcRfWlan 9 } -- 1.3.6.1.4.1.388.14.3.2.1.14.9.1 wsCcRfWlanVlanEntry OBJECT-TYPE SYNTAX WsCcRfWlanVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in wsCcRfWlanVlanTable" INDEX { wsCcRfWlanIndex, wsCcRfWlanVlanIndex } ::= { wsCcRfWlanVlanTable 1 } WsCcRfWlanVlanEntry ::= SEQUENCE { wsCcRfWlanVlanIndex Integer32, wsCcRfWlanVlanUserLimit INTEGER, wsCcRfWlanVlanRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.14.9.1.1 wsCcRfWlanVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The numeric vlan ID for this vlan entry, valid range is [ 1, 4094 ]." ::= { wsCcRfWlanVlanEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.14.9.1.2 wsCcRfWlanVlanUserLimit OBJECT-TYPE SYNTAX INTEGER (0..8192) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of users that can be associated on this VLAN of the WLAN. The value 0 has a special meaning. It means no limit on this VLAN of the WLAN. Other limits, such as maximum number of users per radio, etc, would still apply. Also, the maximum number of users is limited by the maximum number of MUs supported by the wireless switch e.g. 4096 for WS5100, 8192 for RFS7000. The range given here is the upper limit for any WiOS platform." ::= { wsCcRfWlanVlanEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.14.9.1.3 wsCcRfWlanVlanRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "At the time of row-creation, rowStatus is set to createAndGo(4). If user does not wish to have this vlanIndex mapped to a WLAN any more, user deletes the row by setting rowstatus to destroy(6). When a walk is done on this table, it will show one row for each vlan-wlan mapping and the rowStatus of all those rows will be active(1)." ::= { wsCcRfWlanVlanEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.14.10 wsCcRfWlanMaxVlans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of vlans per wlan." ::= { wsCcRfWlan 10 } -- 1.3.6.1.4.1.388.14.3.2.1.14.11 wsCcRfWlanVlanLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The last error message on vlan table operation. It is not cleared." ::= { wsCcRfWlan 11 } -- 1.3.6.1.4.1.388.14.3.2.1.14.13 wsCcRfWlanBwAllocationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables Wlan Bandwidth Allocation." ::= { wsCcRfWlan 13 } -- 1.3.6.1.4.1.388.14.3.2.1.15 wsCcRfAssocAcl OBJECT IDENTIFIER ::= { wsCcRfMIB 15 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1 wsCcRfMuAssocAclTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuAssocAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that allows users to filter MUs that are allowed/denied association to different WLANs based on their MAC address" ::= { wsCcRfAssocAcl 1 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1 wsCcRfMuAssocAclEntry OBJECT-TYPE SYNTAX WsCcRfMuAssocAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfMuAssocAclIndex } ::= { wsCcRfMuAssocAclTable 1 } WsCcRfMuAssocAclEntry ::= SEQUENCE { wsCcRfMuAssocAclIndex Integer32, wsCcRfMuAssocAclMode INTEGER, wsCcRfMuAssocAclStartingMac PhysAddress, wsCcRfMuAssocAclEndingMac PhysAddress, wsCcRfMuAssocAclWlans MultiPointer64, wsCcRfMuAssocAclRowStatus RowStatus, wsCcRfMuAssocAclZone INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.1 wsCcRfMuAssocAclIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index." ::= { wsCcRfMuAssocAclEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.2 wsCcRfMuAssocAclMode OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Allow or deny the Mac range specified by wsCcRfWlanMuAclStartingMac and wsCcRfWlanMuAclEndingMac." DEFVAL { deny } ::= { wsCcRfMuAssocAclEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.3 wsCcRfMuAssocAclStartingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Starting MAC address in a range or addresses." DEFVAL { 'FFFFFFFFFFFF'h } ::= { wsCcRfMuAssocAclEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.4 wsCcRfMuAssocAclEndingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Ending MAC address in a range of addresses." DEFVAL { 'FFFFFFFFFFFF'h } ::= { wsCcRfMuAssocAclEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.5 wsCcRfMuAssocAclWlans OBJECT-TYPE SYNTAX MultiPointer64 MAX-ACCESS read-create STATUS current DESCRIPTION "The list of WLANs that this ACL rule applies to" DEFVAL { { referToEntry001 } } ::= { wsCcRfMuAssocAclEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.6 wsCcRfMuAssocAclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status." ::= { wsCcRfMuAssocAclEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.15.1.1.7 wsCcRfMuAssocAclZone OBJECT-TYPE SYNTAX INTEGER (-1 | 0 | 1..48 | 255) MAX-ACCESS read-create STATUS current DESCRIPTION "The zone in which the MU is located. 0 : Unknown zone 1..48 : User defined zone 255 : Default zone" DEFVAL { 255 } ::= { wsCcRfMuAssocAclEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.16 wsCcRfRap OBJECT IDENTIFIER ::= { wsCcRfMIB 16 } -- 1.3.6.1.4.1.388.14.3.2.1.16.1 wsCcRfRapMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable rogue AP detection" ::= { wsCcRfRap 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.2 wsCcRfRapMaxRogue OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The maximum number of rows in wsCcRfRapStatusTable" ::= { wsCcRfRap 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.3 wsCcRfRapTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The amount of time a rogue AP will remain after it is no longer seen" ::= { wsCcRfRap 3 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4 wsCcRfRapCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRapCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure rogue-ap (ap-detection) parameter" ::= { wsCcRfRap 4 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1 wsCcRfRapCfgEntry OBJECT-TYPE SYNTAX WsCcRfRapCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRapCfgIndex } ::= { wsCcRfRapCfgTable 1 } WsCcRfRapCfgEntry ::= SEQUENCE { wsCcRfRapCfgIndex Integer32, wsCcRfRapCfgAnyMac TruthValue, wsCcRfRapCfgMac PhysAddress, wsCcRfRapCfgAnySsid TruthValue, wsCcRfRapCfgSsid DisplayString, wsCcRfRapCfgRowStatus RowStatus, wsCcRfRapCfgType INTEGER, wsCcRfRapCfgSsidFilter INTEGER, wsCcRfRapCfgBssidFilter INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.1 wsCcRfRapCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index" ::= { wsCcRfRapCfgEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.2 wsCcRfRapCfgAnyMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "any Mac address" DEFVAL { 1 } ::= { wsCcRfRapCfgEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.3 wsCcRfRapCfgMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Mac address" DEFVAL { 'FFFFFFFFFFFF'h } ::= { wsCcRfRapCfgEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.4 wsCcRfRapCfgAnySsid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Any ssid " DEFVAL { 1 } ::= { wsCcRfRapCfgEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.5 wsCcRfRapCfgSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "ssid" DEFVAL { "" } ::= { wsCcRfRapCfgEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.6 wsCcRfRapCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { wsCcRfRapCfgEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.7 wsCcRfRapCfgType OBJECT-TYPE SYNTAX INTEGER { approved(1), ignored(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This column means, the MAC address added belongs to approved list or ignored list" DEFVAL { approved } ::= { wsCcRfRapCfgEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.8 wsCcRfRapCfgSsidFilter OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines whether SSID filter is turned on or off." ::= { wsCcRfRapCfgEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.16.4.1.9 wsCcRfRapCfgBssidFilter OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines whether BSSID filter is turned on or off." ::= { wsCcRfRapCfgEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5 wsCcRfRapStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRapStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status of AP assisted approved and un-approved access ports" ::= { wsCcRfRap 5 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1 wsCcRfRapStatusEntry OBJECT-TYPE SYNTAX WsCcRfRapStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRapStatusType, wsCcRfRapStatusMac, wsCcRfRapStatusHeardAp } ::= { wsCcRfRapStatusTable 1 } WsCcRfRapStatusEntry ::= SEQUENCE { wsCcRfRapStatusType INTEGER, wsCcRfRapStatusMac PhysAddress, wsCcRfRapStatusHeardAp Unsigned32, wsCcRfRapStatusChannel Integer32, wsCcRfRapStatusSsid DisplayString, wsCcRfRapStatusLastTimeSeen TimeTicks, wsCcRfRapStatusLastSignal Integer32, wsCcRfRapStatusMinSignal Integer32, wsCcRfRapStatusMaxSignal Integer32, wsCcRfRapStatusSumSignal Integer32, wsCcRfRapStatusSignalCount Counter32, wsCcRfRapStatusVendorName DisplayString, wsCcRfRapStatusFirstTimeSeen TimeTicks, wsCcRfRapStatusBeaconInterval Unsigned32, wsCcRfRapStatusContained TruthValue, wsCcRfRapStatusEncEnable TruthValue, wsCcRfRapStatusEncryptAlgorithm INTEGER, wsCcRfRapStatusApAttacked TruthValue, wsCcRfRapStatusApToIgnore TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.1 wsCcRfRapStatusType OBJECT-TYPE SYNTAX INTEGER { rogue(1), approved(2), ignored(3), rogueWired(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AP could be authorized, ignored, unauthorized (rogue), unauthorized but wired to the network (rogueWired)" ::= { wsCcRfRapStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.2 wsCcRfRapStatusMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac address of the access port" ::= { wsCcRfRapStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.3 wsCcRfRapStatusHeardAp OBJECT-TYPE SYNTAX Unsigned32 (1..500) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the heard access port " ::= { wsCcRfRapStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.4 wsCcRfRapStatusChannel OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel of heard radio" ::= { wsCcRfRapStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.5 wsCcRfRapStatusSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ssid of heard radio" ::= { wsCcRfRapStatusEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.6 wsCcRfRapStatusLastTimeSeen OBJECT-TYPE SYNTAX TimeTicks UNITS "second(s)" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of second(s) ago this ap was last seen." ::= { wsCcRfRapStatusEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.7 wsCcRfRapStatusLastSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Last signal level from the radio." ::= { wsCcRfRapStatusEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.8 wsCcRfRapStatusMinSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Weakest signal heard from this radio." ::= { wsCcRfRapStatusEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.9 wsCcRfRapStatusMaxSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Strongest signal heard from this radio." ::= { wsCcRfRapStatusEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.10 wsCcRfRapStatusSumSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of all signal values for this radio." ::= { wsCcRfRapStatusEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.11 wsCcRfRapStatusSignalCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of signal data points for this radio." ::= { wsCcRfRapStatusEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.12 wsCcRfRapStatusVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor name of the access port." ::= { wsCcRfRapStatusEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.13 wsCcRfRapStatusFirstTimeSeen OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since the access port was first seen." ::= { wsCcRfRapStatusEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.14 wsCcRfRapStatusBeaconInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Beacon interval of the access port in units of 1,000 microseconds (K-us)." ::= { wsCcRfRapStatusEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.15 wsCcRfRapStatusContained OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the access port was contained." ::= { wsCcRfRapStatusEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.16 wsCcRfRapStatusEncEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the access port has encryption enabled." ::= { wsCcRfRapStatusEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.17 wsCcRfRapStatusEncryptAlgorithm OBJECT-TYPE SYNTAX INTEGER { none(0), wep40(1), tkip(2), aesccmp(3), wep104(4), wapi(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Encrypt algorithm type." ::= { wsCcRfRapStatusEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.18 wsCcRfRapStatusApAttacked OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Rogue AP attacked status." ::= { wsCcRfRapStatusEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.16.5.1.19 wsCcRfRapStatusApToIgnore OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Rogue AP to ignore status." ::= { wsCcRfRapStatusEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.16.6 wsCcRfRapMuAssistMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable mobile-unit assisted scanning" ::= { wsCcRfRap 6 } -- 1.3.6.1.4.1.388.14.3.2.1.16.7 wsCcRfRapMuAssistRefreshPeriod OBJECT-TYPE SYNTAX INTEGER (300..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The period in seconds with which all scan-capable mobile-units are requested to scan for neighboring APs " ::= { wsCcRfRap 7 } -- 1.3.6.1.4.1.388.14.3.2.1.16.8 wsCcRfRUnpprovedApTimeout OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time an unapproved AP will remain after it is no longer seen" ::= { wsCcRfRap 8 } -- 1.3.6.1.4.1.388.14.3.2.1.16.9 wsCcRfRApprovedApTimeout OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time an approved AP will remain after it is no longer seen" ::= { wsCcRfRap 9 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10 wsCcRfRapMuAssistTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRapMuAssistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status of MU assisted un-approved access ports" ::= { wsCcRfRap 10 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1 wsCcRfRapMuAssistEntry OBJECT-TYPE SYNTAX WsCcRfRapMuAssistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfRapMuAssistIndex } ::= { wsCcRfRapMuAssistTable 1 } WsCcRfRapMuAssistEntry ::= SEQUENCE { wsCcRfRapMuAssistIndex INTEGER, wsCcRfRapMuAssistMac PhysAddress, wsCcRfRapMuAssistFoundOnPrtl Unsigned32, wsCcRfRapMuAssistTimestamp Unsigned32, wsCcRfRapMuAssistSsid DisplayString, wsCcRfRapMuAssistBss PhysAddress, wsCcRfRapMuAssistRssi Unsigned32, wsCcRfRapMuAssistType INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.1 wsCcRfRapMuAssistIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Simple index of approved and unapproved APs" ::= { wsCcRfRapMuAssistEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.2 wsCcRfRapMuAssistMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the access port" ::= { wsCcRfRapMuAssistEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.3 wsCcRfRapMuAssistFoundOnPrtl OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Portal with which the MU is associated" ::= { wsCcRfRapMuAssistEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.4 wsCcRfRapMuAssistTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp at which the radio was last heard" ::= { wsCcRfRapMuAssistEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.5 wsCcRfRapMuAssistSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ssid of heard radio" ::= { wsCcRfRapMuAssistEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.6 wsCcRfRapMuAssistBss OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Bss of the heard radio" ::= { wsCcRfRapMuAssistEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.7 wsCcRfRapMuAssistRssi OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "RSSI of the heard radio" ::= { wsCcRfRapMuAssistEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.16.10.1.8 wsCcRfRapMuAssistType OBJECT-TYPE SYNTAX INTEGER { rogue(1), approved(2), ignored(3), rogueWired(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AP could be authorized, ignored, unauthorized (rogue), unauthorized but wired to the network (rogueWired)" ::= { wsCcRfRapMuAssistEntry 8 } -- Rogue AP locationing -- 1.3.6.1.4.1.388.14.3.2.1.16.11 wsCcRfRapLocationing OBJECT IDENTIFIER ::= { wsCcRfRap 11 } -- This table gives information about the rouge APs to be used in AP locationing -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1 wsCcRfRapLocationingTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRapLocationingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives locationing information about the rogue APs" ::= { wsCcRfRapLocationing 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1 wsCcRfRapLocationingEntry OBJECT-TYPE SYNTAX WsCcRfRapLocationingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the rogue AP locationing table" INDEX { wsCcRfRapLocationingIndex } ::= { wsCcRfRapLocationingTable 1 } WsCcRfRapLocationingEntry ::= SEQUENCE { wsCcRfRapLocationingIndex INTEGER, wsCcRfRapLocationingAPMac PhysAddress, wsCcRfRapLocationingRadioMac PhysAddress, wsCcRfRapLocationingSignalStrength Integer32, wsCcRfRapLocationingHeardChannel Integer32, wsCcRfRapLocationingHeardTime TimeTicks } -- Index of the row -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.1 wsCcRfRapLocationingIndex OBJECT-TYPE SYNTAX INTEGER (1..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the row" ::= { wsCcRfRapLocationingEntry 1 } -- MAC address of the rogue AP -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.2 wsCcRfRapLocationingAPMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the rogue AP" ::= { wsCcRfRapLocationingEntry 2 } -- MAC address of the radio which heard this rogue AP beacon. -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.3 wsCcRfRapLocationingRadioMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the radio which heard this rogue AP beacon" ::= { wsCcRfRapLocationingEntry 3 } -- Signal Strength in dBm of the beacon from the rogue AP. -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.4 wsCcRfRapLocationingSignalStrength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Signal Strength in dBm of the beacon from the rogue AP" ::= { wsCcRfRapLocationingEntry 4 } -- Channel on which the beacon from the rogue AP was heard -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.5 wsCcRfRapLocationingHeardChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel on which the beacon from the rogue AP was heard" ::= { wsCcRfRapLocationingEntry 5 } -- Time in timeticks(since boot) when the rogue AP beacon was heard -- 1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.6 wsCcRfRapLocationingHeardTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time in timeticks (since boot) when the rogue AP beacon was heard" ::= { wsCcRfRapLocationingEntry 6 } -- Enable rogue AP locationing. -- 1.3.6.1.4.1.388.14.3.2.1.16.11.2 wsCcRfRapLocationingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable rogue AP locationing" ::= { wsCcRfRapLocationing 2 } -- Maximum number of Rogue APs in the table. -- 1.3.6.1.4.1.388.14.3.2.1.16.11.3 wsCcRfRapLocationingMaxRap OBJECT-TYPE SYNTAX Integer32 (0..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of Rogue APs in the table." ::= { wsCcRfRapLocationing 3 } -- Time interval between two scans in seconds -- 1.3.6.1.4.1.388.14.3.2.1.16.11.4 wsCcRfRapLocationingScanInterval OBJECT-TYPE SYNTAX Integer32 (10..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval between two scans in seconds" ::= { wsCcRfRapLocationing 4 } -- Duration (dwell time) of scan in milliseconds -- 1.3.6.1.4.1.388.14.3.2.1.16.11.5 wsCcRfRapLocationingScanTime OBJECT-TYPE SYNTAX Integer32 (100..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Duration (dwell time) of scan in milliseconds" ::= { wsCcRfRapLocationing 5 } -- Channel Set for 802.11a radio -- -- 1.3.6.1.4.1.388.14.3.2.1.16.11.6 wsCcRfRapLocationingChannelSetForRadioA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Set for 802.11a radio" ::= { wsCcRfRapLocationing 6 } -- Channel Set for 802.11bg radio -- -- 1.3.6.1.4.1.388.14.3.2.1.16.11.7 wsCcRfRapLocationingChannelSetForRadioBG OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Set for 802.11bg radio" ::= { wsCcRfRapLocationing 7 } -- Current number of Rogue APs in the table. -- 1.3.6.1.4.1.388.14.3.2.1.16.11.8 wsCcRfRapLocationingNumRap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of Rogue APs in the table." ::= { wsCcRfRapLocationing 8 } -- Erase the contents of rogue AP locationing table. -- 1.3.6.1.4.1.388.14.3.2.1.16.11.9 wsCcRfRapLocationingClear OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Erase the contents of rogue AP locationing table" ::= { wsCcRfRapLocationing 9 } -- 1.3.6.1.4.1.388.14.3.2.1.16.11.10 wsCcRfRapLocationingChannelSetForRadioAN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Set for 802.11an radio" ::= { wsCcRfRapLocationing 10 } -- 1.3.6.1.4.1.388.14.3.2.1.16.11.11 wsCcRfRapLocationingChannelSetForRadioBGN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Set for 802.11bgn radio" ::= { wsCcRfRapLocationing 11 } -- Rogue AP Containment -- 1.3.6.1.4.1.388.14.3.2.1.16.12 wsCcRfRapContainment OBJECT IDENTIFIER ::= { wsCcRfRap 12 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.1 wsCcRfRapContainmentEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Rogue AP Containment" ::= { wsCcRfRapContainment 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.2 wsCcRfRapContainmentInterval OBJECT-TYPE SYNTAX Unsigned32 (20..5000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the interval for broadcast 802.11 de-authentication." ::= { wsCcRfRapContainment 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3 wsCcRfRapContainmentTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRapContainmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Rogue AP (MACs) configured for Containment," ::= { wsCcRfRapContainment 3 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3.1 wsCcRfRapContainmentEntry OBJECT-TYPE SYNTAX WsCcRfRapContainmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries in the Rogue AP Containment Table" INDEX { wsCcRfRapContainmentIndex } ::= { wsCcRfRapContainmentTable 1 } WsCcRfRapContainmentEntry ::= SEQUENCE { wsCcRfRapContainmentIndex INTEGER, wsCcRfRapContainmentRogueMac PhysAddress, wsCcRfRapContainmentFinderCount Unsigned32, wsCcRfRapContainmentRowStatus AbbrevRowStatus, wsCcRfRapContainmentReportedChannel Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.1 wsCcRfRapContainmentIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Rogue AP Containment Table Index" ::= { wsCcRfRapContainmentEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.2 wsCcRfRapContainmentRogueMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "BSS MAC of the Rogue AP which is to be Contained." ::= { wsCcRfRapContainmentEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.3 wsCcRfRapContainmentFinderCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of finders for a Rogue AP. A Rogue AP report may time out, or the Rogue AP can move to the Approved list. In either case, Containment shall stop for that particular Rogue AP." ::= { wsCcRfRapContainmentEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.4 wsCcRfRapContainmentRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status (for Rogue AP Containment Table)" ::= { wsCcRfRapContainmentEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.5 wsCcRfRapContainmentReportedChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel on which the Rogue Access Point is reported." ::= { wsCcRfRapContainmentEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.16.13 wsCcRfRapUnapprovedApCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of unique unapproved APs in wsCcRfRapStatusTable." ::= { wsCcRfRap 13 } -- 1.3.6.1.4.1.388.14.3.2.1.16.14 wsCcRfRapIgnoredApTimeout OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time an ignored AP will remain after it is no longer seen" ::= { wsCcRfRap 14 } -- 1.3.6.1.4.1.388.14.3.2.1.16.15 wsCcRfRapPermittedVendorTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfRapPermittedVendorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Permitted access port vendors." ::= { wsCcRfRap 15 } -- 1.3.6.1.4.1.388.14.3.2.1.16.15.1 wsCcRfRapPermittedVendorEntry OBJECT-TYPE SYNTAX WsCcRfRapPermittedVendorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfRapPermittedVendorIndex } ::= { wsCcRfRapPermittedVendorTable 1 } WsCcRfRapPermittedVendorEntry ::= SEQUENCE { wsCcRfRapPermittedVendorIndex Integer32, wsCcRfRapPermittedVendorName DisplayString, wsCcRfRapPermittedVendorRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.16.15.1.1 wsCcRfRapPermittedVendorIndex OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Small, arbitrary integer index." ::= { wsCcRfRapPermittedVendorEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.16.15.1.2 wsCcRfRapPermittedVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Access port vendor name" ::= { wsCcRfRapPermittedVendorEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.16.15.1.3 wsCcRfRapPermittedVendorRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { wsCcRfRapPermittedVendorEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17 wsCcRfIds OBJECT IDENTIFIER ::= { wsCcRfMIB 17 } -- 1.3.6.1.4.1.388.14.3.2.1.17.1 wsCcRfIdsMaxExcsvAssoc OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Monitor the number of association requests from mobile- units." ::= { wsCcRfIds 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.2 wsCcRfIdsMaxExcsvProbes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Monitor the number of probe requests from mobile-units." ::= { wsCcRfIds 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.3 wsCcRfIdsMuFilterAgeOut OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the number of seconds to filter a mobile-unit that set off IDS" ::= { wsCcRfIds 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4 wsCcRfIdsMax OBJECT IDENTIFIER ::= { wsCcRfIds 4 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.1 wsCcRfIdsMaxExcsvAssos OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of association requests from mobile-units." ::= { wsCcRfIdsMax 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.2 wsCcRfIdsMaxExcsvProbs OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of probe requests from mobile-units." ::= { wsCcRfIdsMax 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.3 wsCcRfIdsMaxExcsvDisassos OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of disassociation requests from mobile-units." ::= { wsCcRfIdsMax 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.4 wsCcRfIdsMaxExcsvAuthFailures OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of authentication failures in mobile-units." ::= { wsCcRfIdsMax 4 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.5 wsCcRfIdsMaxExcsvCryptoReplays OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of crypto replays in mobile-units." ::= { wsCcRfIdsMax 5 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.6 wsCcRfIdsMaxExcsv80211Replays OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of 802.11 replays in mobile-units." ::= { wsCcRfIdsMax 6 } -- 1.3.6.1.4.1.388.14.3.2.1.17.4.7 wsCcRfIdsMaxExcsvDecryptFails OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the limit on the number of decryption failures in mobile-units." ::= { wsCcRfIdsMax 7 } -- 1.3.6.1.4.1.388.14.3.2.1.17.5 wsCcRfIdsAnmly OBJECT IDENTIFIER ::= { wsCcRfIds 5 } -- 1.3.6.1.4.1.388.14.3.2.1.17.5.1 wsCcRfIdsAnmlySrcMacEqDestMac OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When enabled, it carries out anomaly detection where source and destination MAC addresses are same in the frame." ::= { wsCcRfIdsAnmly 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.5.2 wsCcRfIdsAnmlyNullDestination OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When enabled, it carries out anomaly detection where the destination MAC is NULL." ::= { wsCcRfIdsAnmly 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.5.3 wsCcRfIdsAnmlySrcMulticastMac OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When enabled, it carries out anomaly detection where the source MAC address in the frame is a multicast address." ::= { wsCcRfIdsAnmly 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.5.4 wsCcRfIdsAnmlyWeakWepIv OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When enabled, it detects the out anomaly where the WEP IV is weak." ::= { wsCcRfIdsAnmly 4 } -- 1.3.6.1.4.1.388.14.3.2.1.17.6 wsCcRfIdsStatusFilteredMacMax OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Set the maximum number of MACs to be filtered for IDS." ::= { wsCcRfIds 6 } -- 1.3.6.1.4.1.388.14.3.2.1.17.7 wsCcRfIdsMuFilterAgeOutTime OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set the number of seconds to filter a mobile-unit that set off IDS" ::= { wsCcRfIds 7 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8 wsCcRfIdsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIdsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to track WIDS status for each filtered MAC." ::= { wsCcRfIds 8 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1 wsCcRfIdsStatusEntry OBJECT-TYPE SYNTAX WsCcRfIdsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfIdsStatusTable" INDEX { wsCcRfIdsStatusViolatnIndex } ::= { wsCcRfIdsStatusTable 1 } WsCcRfIdsStatusEntry ::= SEQUENCE { wsCcRfIdsStatusViolatnIndex INTEGER, wsCcRfIdsStatusFilteredMuMac PhysAddress, wsCcRfIdsStatusViolatnType IdsViolationType, wsCcRfIdsStatusRadioIndex INTEGER, wsCcRfIdsStatusRemainingBlacklistTime TimeTicks, wsCcRfIdsStatusRowStatus RowStatus, wsCcRfIdsStatusVendorName DisplayString, wsCcRfIdsStatusFirstTimeSeen TimeTicks, wsCcRfIdsStatusLastTimeSeen TimeTicks, wsCcRfIdsStatusMaxSignal Integer32, wsCcRfIdsStatusChannel Unsigned32, wsCcRfIdsStatusContained TruthValue, wsCcRfIdsStatusAdhoc TruthValue, wsCcRfIdsStatusRogueStaMonitorNum Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.1 wsCcRfIdsStatusViolatnIndex OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The index for this table which tells about at most 100 most recent violations." ::= { wsCcRfIdsStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.2 wsCcRfIdsStatusFilteredMuMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the mobile-unit which is being filtered for WIDS." ::= { wsCcRfIdsStatusEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.3 wsCcRfIdsStatusViolatnType OBJECT-TYPE SYNTAX IdsViolationType MAX-ACCESS read-only STATUS current DESCRIPTION "The specific violation type done by the MU, whether a threshold was crossed or an anomaly was detected." ::= { wsCcRfIdsStatusEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.4 wsCcRfIdsStatusRadioIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The radio index where this violation occured." ::= { wsCcRfIdsStatusEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.5 wsCcRfIdsStatusRemainingBlacklistTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining blacklist time for this mobile-unit which had a WIDS violation." ::= { wsCcRfIdsStatusEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.6 wsCcRfIdsStatusRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this entry." ::= { wsCcRfIdsStatusEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.7 wsCcRfIdsStatusVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor name of the mobile unit." ::= { wsCcRfIdsStatusEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.8 wsCcRfIdsStatusFirstTimeSeen OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since the mobile unit was first filtered by IDS." ::= { wsCcRfIdsStatusEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.9 wsCcRfIdsStatusLastTimeSeen OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since the mobile unit was last filtered by IDS." ::= { wsCcRfIdsStatusEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.10 wsCcRfIdsStatusMaxSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Strongest receive signal strength of the mobile unit." ::= { wsCcRfIdsStatusEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.11 wsCcRfIdsStatusChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel of the mobile unit." ::= { wsCcRfIdsStatusEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.12 wsCcRfIdsStatusContained OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the mobile unit was contained." ::= { wsCcRfIdsStatusEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.13 wsCcRfIdsStatusAdhoc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the mobile unit is ad hoc." ::= { wsCcRfIdsStatusEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.17.8.1.14 wsCcRfIdsStatusRogueStaMonitorNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of suspicious MUs detected." ::= { wsCcRfIdsStatusEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9 wsCcRfIdsEventTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIdsEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfIdsEventTable" ::= { wsCcRfIds 9 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9.1 wsCcRfIdsEventEntry OBJECT-TYPE SYNTAX WsCcRfIdsEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfMuIdsTable." INDEX { wsCcRfIdsEventRadioIndex, wsCcRfIdsEventType } ::= { wsCcRfIdsEventTable 1 } WsCcRfIdsEventEntry ::= SEQUENCE { wsCcRfIdsEventRadioIndex INTEGER, wsCcRfIdsEventType IdsViolationType, wsCcRfIdsEventLastOccurredTime TimeTicks, wsCcRfIdsEventTotalCount Integer32, wsCcRfIdsEventCountSinceMidnight Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9.1.1 wsCcRfIdsEventRadioIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The radio index where this event last occured." ::= { wsCcRfIdsEventEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9.1.2 wsCcRfIdsEventType OBJECT-TYPE SYNTAX IdsViolationType MAX-ACCESS read-only STATUS current DESCRIPTION "The event type, which is the index for this table. There are eleven event types enumerated so far and hence this table has eleven rows." ::= { wsCcRfIdsEventEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9.1.3 wsCcRfIdsEventLastOccurredTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Timeticks since the last occurence of this event." ::= { wsCcRfIdsEventEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9.1.4 wsCcRfIdsEventTotalCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of how many times a given type of event has occurred in the switch." ::= { wsCcRfIdsEventEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.17.9.1.5 wsCcRfIdsEventCountSinceMidnight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of how many times a given type of event has occurred in the switch since midnight i.e. 00:00:00 hours." ::= { wsCcRfIdsEventEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.17.10 wsCcRfIdsClearMuIdsEventEntries OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A scalar to reset all entries in the wsCcRfIdsMuEventTable to 0" ::= { wsCcRfIds 10 } -- 1.3.6.1.4.1.388.14.3.2.1.17.11 wsCcRfIdsEventPeriod OBJECT-TYPE SYNTAX INTEGER (0..10) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The period of time, in seconds, over which the IDS events are observed to check if they exceeded the threshold. For example if this value is set as 5 seconds, the threshold for, say, excessive authentication failures can be, say, 100 event detections per 5 second interval." ::= { wsCcRfIds 11 } -- 1.3.6.1.4.1.388.14.3.2.1.17.12 wsCcRfIdsDetectionWindow OBJECT-TYPE SYNTAX Unsigned32 (5..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Number of seconds for detection." ::= { wsCcRfIds 12 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13 wsCcRfIdsThresholdsTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIdsThresholdsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Thresholds and filter-ageout for each violation type." ::= { wsCcRfIds 13 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13.1 wsCcRfIdsThresholdsEntry OBJECT-TYPE SYNTAX WsCcRfIdsThresholdsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfIdsThresholdsTable." INDEX { wsCcRfIdsThresholdsViolTypeIndex } ::= { wsCcRfIdsThresholdsTable 1 } WsCcRfIdsThresholdsEntry ::= SEQUENCE { wsCcRfIdsThresholdsViolTypeIndex IdsViolationType, wsCcRfIdsThresholdsMu Unsigned32, wsCcRfIdsThresholdsRadio Unsigned32, wsCcRfIdsThresholdsSwitch Unsigned32, wsCcRfIdsThresholdsFilterAgeout Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13.1.1 wsCcRfIdsThresholdsViolTypeIndex OBJECT-TYPE SYNTAX IdsViolationType MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsCcRfIdsThresholdsEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13.1.2 wsCcRfIdsThresholdsMu OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "MU threshold for violation type. Setting the value to 0 will disable the check." ::= { wsCcRfIdsThresholdsEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13.1.3 wsCcRfIdsThresholdsRadio OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Radio threshold for violation type. Setting the value to 0 will disable the check." ::= { wsCcRfIdsThresholdsEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13.1.4 wsCcRfIdsThresholdsSwitch OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Switch threshold for violation type. Setting the value to 0 will disable the check." ::= { wsCcRfIdsThresholdsEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.17.13.1.5 wsCcRfIdsThresholdsFilterAgeout OBJECT-TYPE SYNTAX Unsigned32 (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Number of seconds to filter for violation type." ::= { wsCcRfIdsThresholdsEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.17.14 wsCcRfIdsRadioIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio index where this event last occured." ::= { wsCcRfIds 14 } -- 1.3.6.1.4.1.388.14.3.2.1.17.15 wsCcRfIdsViolationType OBJECT-TYPE SYNTAX IdsViolationType MAX-ACCESS read-only STATUS current DESCRIPTION "The specific type of the IDS violation has occured." ::= { wsCcRfIds 15 } -- 1.3.6.1.4.1.388.14.3.2.1.17.16 wsCcRfIdsViolCountLastDetWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IDS violations has occured in the last detection window." ::= { wsCcRfIds 16 } -- 1.3.6.1.4.1.388.14.3.2.1.17.17 wsCcRfIdsBadEssidTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIdsBadEssidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bad Essid Table. To be used for configuring bad essid frame anomaly detection in IDS feature." ::= { wsCcRfIds 17 } -- 1.3.6.1.4.1.388.14.3.2.1.17.17.1 wsCcRfIdsBadEssidEntry OBJECT-TYPE SYNTAX WsCcRfIdsBadEssidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A bad essid string entry. Upto 10 are allowed." INDEX { wsCcRfIdsBadEssidIndex } ::= { wsCcRfIdsBadEssidTable 1 } WsCcRfIdsBadEssidEntry ::= SEQUENCE { wsCcRfIdsBadEssidIndex INTEGER, wsCcRfIdsBadEssid DisplayString, wsCcRfIdsBadEssidRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.17.17.1.1 wsCcRfIdsBadEssidIndex OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the bad ESSID string." ::= { wsCcRfIdsBadEssidEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.17.1.2 wsCcRfIdsBadEssid OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Bad ESSID string." ::= { wsCcRfIdsBadEssidEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.17.1.3 wsCcRfIdsBadEssidRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status: only createAndGo(4) and delete(6) are supported." ::= { wsCcRfIdsBadEssidEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.18 wsCcRfIdsTriggerConditionsTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIdsTriggerConditionsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table contains the trigger conditions for the IDS events listed in table wsCcRfIdsThresholdsTable. The index for this table is derived from wsCcRfIdsThresholdsTable. The rows hold three truth values, each corresponding to the corresponding row in wsCcRfIdsThresholdsTable." ::= { wsCcRfIds 18 } -- 1.3.6.1.4.1.388.14.3.2.1.17.18.1 wsCcRfIdsTriggerConditionsEntry OBJECT-TYPE SYNTAX WsCcRfIdsTriggerConditionsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in wsCcRfIdsTriggerConditionsTable" INDEX { wsCcRfIdsThresholdsViolTypeIndex } ::= { wsCcRfIdsTriggerConditionsTable 1 } WsCcRfIdsTriggerConditionsEntry ::= SEQUENCE { wsCcRfIdsTriggerAuthorizedEnabled TruthValue, wsCcRfIdsTriggerUnauthorizedEnabled TruthValue, wsCcRfIdsTriggerIgnoredEnabled TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.17.18.1.1 wsCcRfIdsTriggerAuthorizedEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable triggering this event for authorized devices. The IDS mechanism will start counting events from authorized devices only if this is enabled." ::= { wsCcRfIdsTriggerConditionsEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.18.1.2 wsCcRfIdsTriggerUnauthorizedEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable triggering this event for unauthorized devices The IDS mechanism will start counting events from unauthorized devices only if this is enabled." ::= { wsCcRfIdsTriggerConditionsEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.18.1.3 wsCcRfIdsTriggerIgnoredEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable triggering this event for ignored devices The IDS mechanism will start counting events from ignored devices only if this is enabled." ::= { wsCcRfIdsTriggerConditionsEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.19 wsCcRfIdsApDefaultSSIDTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIdsApDefaultSSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds the list of default SSIDs for violWipsAPDefaultConfig IDS event." ::= { wsCcRfIds 19 } -- 1.3.6.1.4.1.388.14.3.2.1.17.19.1 wsCcRfIdsApDefaultSSIDEntry OBJECT-TYPE SYNTAX WsCcRfIdsApDefaultSSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in wsCcRfIdsApDefaultSSIDTable" INDEX { wsCcRfIdsApDefaultSSIDIndex } ::= { wsCcRfIdsApDefaultSSIDTable 1 } WsCcRfIdsApDefaultSSIDEntry ::= SEQUENCE { wsCcRfIdsApDefaultSSIDIndex INTEGER, wsCcRfIdsApDefaultSSID DisplayString, wsCcRfIdsApDefaultSSIDRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.17.19.1.1 wsCcRfIdsApDefaultSSIDIndex OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the default SSID string." ::= { wsCcRfIdsApDefaultSSIDEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.17.19.1.2 wsCcRfIdsApDefaultSSID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Default SSID string." ::= { wsCcRfIdsApDefaultSSIDEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.17.19.1.3 wsCcRfIdsApDefaultSSIDRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status: only createAndGo(4) and delete(6) are supported." ::= { wsCcRfIdsApDefaultSSIDEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.17.20 wsCcRfIdsSuspiciousAPSignalStrengthThreshold OBJECT-TYPE SYNTAX Integer32 (-128..127) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The Signal Strength threshold for suspicious AP detection" ::= { wsCcRfIds 20 } -- 1.3.6.1.4.1.388.14.3.2.1.17.21 wsCcRfIdsThresholdsTriggersReset OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the contents of wsCcRfIdsThresholdsTable and wsCcRfIdsTriggerConditionsTable to default values." ::= { wsCcRfIds 21 } -- 1.3.6.1.4.1.388.14.3.2.1.17.22 wsCcRfIdsDisabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable or Enable IDS. Writing a true to this object will disable IDS. Writing a false to this will enable IDS. The default is Disabled." ::= { wsCcRfIds 22 } -- 1.3.6.1.4.1.388.14.3.2.1.17.23 wsCcRfIdsStatusFilteredMacCurr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of mobile unit MACs filtered by IDS." ::= { wsCcRfIds 23 } -- 1.3.6.1.4.1.388.14.3.2.1.18 wsCcRfSelfHealing OBJECT IDENTIFIER ::= { wsCcRfMIB 18 } -- 1.3.6.1.4.1.388.14.3.2.1.18.1 wsCcRfSelfHealingNeighborRecoveryEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable monitoring of APs and attempt to increase coverage on failure." ::= { wsCcRfSelfHealing 1 } -- 1.3.6.1.4.1.388.14.3.2.1.18.2 wsCcRfSelfHealingDetectNeighborNow OBJECT-TYPE SYNTAX DoActionShowProgress MAX-ACCESS read-write STATUS current DESCRIPTION "Disassociate all MUs, clear current neigbors and run a neighbor detection" ::= { wsCcRfSelfHealing 2 } -- 1.3.6.1.4.1.388.14.3.2.1.18.3 wsCcRfSelfHealingInterferenceAvoidanceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable interference avoidance." ::= { wsCcRfSelfHealing 3 } -- 1.3.6.1.4.1.388.14.3.2.1.18.4 wsCcRfSelfHealingInterferenceAvoidanceRetriesx10 OBJECT-TYPE SYNTAX Integer32 (0..150) MAX-ACCESS read-write STATUS current DESCRIPTION "The average number retries (x10) to cause a radio to re-run auto channel selection." ::= { wsCcRfSelfHealing 4 } -- 1.3.6.1.4.1.388.14.3.2.1.18.5 wsCcRfSelfHealingInterferenceAvoidanceHoldTime OBJECT-TYPE SYNTAX Integer32 (30..65535) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to disable interference avoidance after a detection. This prevents a radio from changing channels continuously." ::= { wsCcRfSelfHealing 5 } -- 1.3.6.1.4.1.388.14.3.2.1.18.6 wsCcRfSelfHealingNeighborRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSelfHealingNeighborRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores radio neighbor information." ::= { wsCcRfSelfHealing 6 } -- 1.3.6.1.4.1.388.14.3.2.1.18.6.1 wsCcRfSelfHealingNeighborRadioEntry OBJECT-TYPE SYNTAX WsCcRfSelfHealingNeighborRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfRadioIndex } ::= { wsCcRfSelfHealingNeighborRadioTable 1 } WsCcRfSelfHealingNeighborRadioEntry ::= SEQUENCE { wsCcRfSelfHealingNeighborRadioIndices OCTET STRING } -- 1.3.6.1.4.1.388.14.3.2.1.18.6.1.1 wsCcRfSelfHealingNeighborRadioIndices OBJECT-TYPE SYNTAX OCTET STRING (SIZE (34)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indices of Neighbor Radios. field octets contents range ----- ------ -------- ----- 1 1-2 Count of indices 0..16 2-17 3-34 Neighbor Radio Indices 0..4096 for each index ---------------------------------------------------------------------------------- | Count (2 octets) | Neighbor Radio Indices ( 2 octets times 16 occurrences | ---------------------------------------------------------------------------------- All octets are in network byte order. Definition of contents: Count of indices: The number of Neighbor Radio Indices following. Neighbor Radios Indices: Each Neighbor Radios Index takes 2 octets. There are 16 Neighbor Radio Indices. Unused Neighbor Radios Indices will have the value zero." ::= { wsCcRfSelfHealingNeighborRadioEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7 wsCcRfSelfHealingMonitoringTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSelfHealingMonitoringEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " ::= { wsCcRfSelfHealing 7 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1 wsCcRfSelfHealingMonitoringEntry OBJECT-TYPE SYNTAX WsCcRfSelfHealingMonitoringEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " " INDEX { wsCcRfSelfHealingMonitoringTransRadio, wsCcRfSelfHealingMonitoringRecvRadio } ::= { wsCcRfSelfHealingMonitoringTable 1 } WsCcRfSelfHealingMonitoringEntry ::= SEQUENCE { wsCcRfSelfHealingMonitoringTransRadio Integer32, wsCcRfSelfHealingMonitoringRecvRadio Integer32, wsCcRfSelfHealingMonitoringChannel Integer32, wsCcRfSelfHealingMonitoringLastTime TimeTicks, wsCcRfSelfHealingMonitoringLastSignal Integer32, wsCcRfSelfHealingMonitoringMinSig Integer32, wsCcRfSelfHealingMonitoringMaxSig Integer32, wsCcRfSelfHealingMonitoringSumSig Integer32, wsCcRfSelfHealingMonitoringNumSig Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.1 wsCcRfSelfHealingMonitoringTransRadio OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "Index of transmitting radio." ::= { wsCcRfSelfHealingMonitoringEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.2 wsCcRfSelfHealingMonitoringRecvRadio OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "Index of receiving Radio." ::= { wsCcRfSelfHealingMonitoringEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.3 wsCcRfSelfHealingMonitoringChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Monitoring channel" ::= { wsCcRfSelfHealingMonitoringEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.4 wsCcRfSelfHealingMonitoringLastTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The time of the last beacon heard" ::= { wsCcRfSelfHealingMonitoringEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.5 wsCcRfSelfHealingMonitoringLastSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The dBm signal value of the last beacon heard" ::= { wsCcRfSelfHealingMonitoringEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.6 wsCcRfSelfHealingMonitoringMinSig OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The lowest dBm signal value heard" ::= { wsCcRfSelfHealingMonitoringEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.7 wsCcRfSelfHealingMonitoringMaxSig OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The highest dBm signal value heard" ::= { wsCcRfSelfHealingMonitoringEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.8 wsCcRfSelfHealingMonitoringSumSig OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sum of all signal values heard" ::= { wsCcRfSelfHealingMonitoringEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.18.7.1.9 wsCcRfSelfHealingMonitoringNumSig OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of signal values heard" ::= { wsCcRfSelfHealingMonitoringEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.19 wsCcRfHotspot OBJECT IDENTIFIER ::= { wsCcRfMIB 19 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1 wsCcRfHotspotTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfHotspotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure hotspot related parameters." ::= { wsCcRfHotspot 1 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1 wsCcRfHotspotEntry OBJECT-TYPE SYNTAX WsCcRfHotspotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex } ::= { wsCcRfHotspotTable 1 } WsCcRfHotspotEntry ::= SEQUENCE { wsCcRfHotspotServerIp1 IpAddress, wsCcRfHotspotServerPort1 Integer32, wsCcRfHotspotServerSecret1 Password, wsCcRfHotspotServerIp2 IpAddress, wsCcRfHotspotServerPort2 Integer32, wsCcRfHotspotServerSecret2 Password, wsCcRfHotspotServerRetries Integer32, wsCcRfHotspotServerTimeout Integer32, wsCcRfHotspotPageLocation INTEGER, wsCcRfHotspotWebsiteType INTEGER, wsCcRfHotspotMode INTEGER, wsCcRfHotspotLogoutOnClose TruthValue, wsCcRfHotspotMaxLoginAttempts INTEGER, wsCcRfHotspotRedirectToHostName TruthValue, wsCcRfHotspotSimultaneousUsers INTEGER, wsCcRfHotspotPreAuthVlan INTEGER, wsCcRfHotspotAllowEap TruthValue, wsCcRfHotspotCacheAgeout Unsigned32, wsCcRfHotspotConnectionMode INTEGER, wsCcRfHotspotNTFLogoutPort Integer32, wsCcRfHotspotQueryIndices OCTET STRING, wsCcRfHotspotUpdSplashScreen INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.1 wsCcRfHotspotServerIp1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary Radius server ip for hotspot authentication." ::= { wsCcRfHotspotEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.2 wsCcRfHotspotServerPort1 OBJECT-TYPE SYNTAX Integer32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary Radius server port for hotspot authentication." ::= { wsCcRfHotspotEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.3 wsCcRfHotspotServerSecret1 OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary Radius server shared secret for hotspot authentication." ::= { wsCcRfHotspotEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.4 wsCcRfHotspotServerIp2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary Radius server ip for hotspot authentication." ::= { wsCcRfHotspotEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.5 wsCcRfHotspotServerPort2 OBJECT-TYPE SYNTAX Integer32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary Radius server port for hotspot authentication." ::= { wsCcRfHotspotEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.6 wsCcRfHotspotServerSecret2 OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary Radius server shared secret for hotspot authentication." ::= { wsCcRfHotspotEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.7 wsCcRfHotspotServerRetries OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries the wireless switch initiates before giving up" ::= { wsCcRfHotspotEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.8 wsCcRfHotspotServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Time the wireless switch waits for a response from the radius server before retrying" ::= { wsCcRfHotspotEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.9 wsCcRfHotspotPageLocation OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The location of the webpages to be used for authentication. These pages can either be hosted on the wireless switch or on an external web server" ::= { wsCcRfHotspotEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.10 wsCcRfHotspotWebsiteType OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2), advanced(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The website type to be used for authentication. The website can either be hosted on the wireless switch or on an external web server" ::= { wsCcRfHotspotEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.11 wsCcRfHotspotMode OBJECT-TYPE SYNTAX INTEGER { httpBased(1), webPortalBased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The hotspot mode for a WLAN. This should be set to 'webPortalBased' to use customer-specific portal." ::= { wsCcRfHotspotEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.12 wsCcRfHotspotLogoutOnClose OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This property allows end user to enable/disable user logout on browser close event." ::= { wsCcRfHotspotEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.13 wsCcRfHotspotMaxLoginAttempts OBJECT-TYPE SYNTAX INTEGER (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This property allows end user to specify Maximum login attempts that can be allowed before user is denied any access." ::= { wsCcRfHotspotEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.14 wsCcRfHotspotRedirectToHostName OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the use of hostname/System-Name in the redirection URL instead of the IP address of the switch." DEFVAL { false } ::= { wsCcRfHotspotEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.15 wsCcRfHotspotSimultaneousUsers OBJECT-TYPE SYNTAX INTEGER (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of MAC addresses that are allowed to use same username at the same time in hotspot " DEFVAL { '0'b } ::= { wsCcRfHotspotEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.16 wsCcRfHotspotPreAuthVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "This provides an ability to leave non-authenticated hotspot users in separate pre-auth vlan with a short lease." DEFVAL { '1'b } ::= { wsCcRfHotspotEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.17 wsCcRfHotspotAllowEap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow EAP authentication in addition to web based login." DEFVAL { false } ::= { wsCcRfHotspotEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.18 wsCcRfHotspotCacheAgeout OBJECT-TYPE SYNTAX Unsigned32 (5..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds to age out the cache after mu disassociation." ::= { wsCcRfHotspotEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.19 wsCcRfHotspotConnectionMode OBJECT-TYPE SYNTAX INTEGER { http(1), https(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use the type of connection mode as https or http." ::= { wsCcRfHotspotEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.20 wsCcRfHotspotNTFLogoutPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure port to send NTF-Logout in web-portal mode hotspot. Select a porta in the range of 1-65535, or 0 to use original source port in req-challenge." ::= { wsCcRfHotspotEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.21 wsCcRfHotspotQueryIndices OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies queries to be appended to redirection url. This can be a single index or a list of 10." ::= { wsCcRfHotspotEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.19.1.1.22 wsCcRfHotspotUpdSplashScreen OBJECT-TYPE SYNTAX INTEGER { idle(1), pushSplashScreen(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To push the no service page to APs." ::= { wsCcRfHotspotEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2 wsCcRfHotspotPageTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfHotspotPageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure hotspot page parameters" ::= { wsCcRfHotspot 2 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1 wsCcRfHotspotPageEntry OBJECT-TYPE SYNTAX WsCcRfHotspotPageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex, wsCcRfHotspotPageType } ::= { wsCcRfHotspotPageTable 1 } WsCcRfHotspotPageEntry ::= SEQUENCE { wsCcRfHotspotPageType INTEGER, wsCcRfHotspotIntPageTitle OCTET STRING, wsCcRfHotspotIntPageHeader OCTET STRING, wsCcRfHotspotIntPageDescr OCTET STRING, wsCcRfHotspotIntPageFooter OCTET STRING, wsCcRfHotspotIntPageImgUrl1 OCTET STRING, wsCcRfHotspotIntPageImgUrl2 OCTET STRING, wsCcRfHotspotExtPageUrl OCTET STRING, wsCcRfHotspotPageSetDefault TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.1 wsCcRfHotspotPageType OBJECT-TYPE SYNTAX INTEGER { login(1), welcome(2), fail(3), terms(4), noservice(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Hotspot page type" ::= { wsCcRfHotspotPageEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.2 wsCcRfHotspotIntPageTitle OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that will be in the title of the webpage." ::= { wsCcRfHotspotPageEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.3 wsCcRfHotspotIntPageHeader OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that is displayed as a header. (large font, top section) of the webpage. " ::= { wsCcRfHotspotPageEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.4 wsCcRfHotspotIntPageDescr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that is displayed as the main body (normal font, middle of page) of the webpage" ::= { wsCcRfHotspotPageEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.5 wsCcRfHotspotIntPageFooter OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that is displayed at the footer (smaller font, bottom section) of the webpage" ::= { wsCcRfHotspotPageEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.6 wsCcRfHotspotIntPageImgUrl1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "main image( large size) that will be served up by the local webpage. Appears between the header and description on the webpage." ::= { wsCcRfHotspotPageEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.7 wsCcRfHotspotIntPageImgUrl2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Small image (thumbnail size) that will be served up by the local webpage. Appears near the footer on the webpage." ::= { wsCcRfHotspotPageEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.8 wsCcRfHotspotExtPageUrl OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Url of external page" ::= { wsCcRfHotspotPageEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.19.2.1.9 wsCcRfHotspotPageSetDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set terms and conditions page information to default. Can set only true(1) and reset to false(2) once the page is set to default." DEFVAL { false } ::= { wsCcRfHotspotPageEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.19.3 wsCcRfHotspotWhiteIpTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfHotspotWhiteIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure hotspot white list parameters. Users who have not yet authenticated will be allowed access to these IP addresses" ::= { wsCcRfHotspot 3 } -- 1.3.6.1.4.1.388.14.3.2.1.19.3.1 wsCcRfHotspotWhiteIpEntry OBJECT-TYPE SYNTAX WsCcRfHotspotWhiteIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsCcRfWlanIndex, wsCcRfHotspotWhiteIpRuleIndex } ::= { wsCcRfHotspotWhiteIpTable 1 } WsCcRfHotspotWhiteIpEntry ::= SEQUENCE { wsCcRfHotspotWhiteIpRuleIndex Integer32, wsCcRfHotspotWhiteIpAddr IpAddress } -- 1.3.6.1.4.1.388.14.3.2.1.19.3.1.1 wsCcRfHotspotWhiteIpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "rule index" ::= { wsCcRfHotspotWhiteIpEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.19.3.1.2 wsCcRfHotspotWhiteIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "White-list IP address" DEFVAL { ''h } ::= { wsCcRfHotspotWhiteIpEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.19.4 wsCcRfHotspotAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfHotspotAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure hotspot authentication related parameters." ::= { wsCcRfHotspot 4 } -- 1.3.6.1.4.1.388.14.3.2.1.19.4.1 wsCcRfHotspotAuthEntry OBJECT-TYPE SYNTAX WsCcRfHotspotAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries for hotspot authentication." INDEX { wsCcRfWlanIndex } ::= { wsCcRfHotspotAuthTable 1 } WsCcRfHotspotAuthEntry ::= SEQUENCE { wsCcRfHotspotAuthFreeEnable TruthValue, wsCcRfHotspotAuthRadiusEnable TruthValue, wsCcRfHotspotAuthRedirectBackEnable TruthValue, wsCcRfHotspotAuthRedirectBackDelay INTEGER, wsCcRfHotspotAuthRedirectTo OCTET STRING } -- 1.3.6.1.4.1.388.14.3.2.1.19.4.1.1 wsCcRfHotspotAuthFreeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Free zone or guest access for internal and external web pages." ::= { wsCcRfHotspotAuthEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.19.4.1.2 wsCcRfHotspotAuthRadiusEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Hotspot authorization options per wlan RADIUS, Free zone for internal and external web pages." DEFVAL { false } ::= { wsCcRfHotspotAuthEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.19.4.1.3 wsCcRfHotspotAuthRedirectBackEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable redirect user to the initial (used by the user before getting to the login page) of defined URI." DEFVAL { false } ::= { wsCcRfHotspotAuthEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.19.4.1.4 wsCcRfHotspotAuthRedirectBackDelay OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The value configured here is about to redirect you to the message for configured delay (in seconds)." ::= { wsCcRfHotspotAuthEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.19.4.1.5 wsCcRfHotspotAuthRedirectTo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This value redirects to the URI for each welcome page where authorized user will be redirected to only when value entered." ::= { wsCcRfHotspotAuthEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.20 wsCcRfQos OBJECT IDENTIFIER ::= { wsCcRfMIB 20 } -- 1.3.6.1.4.1.388.14.3.2.1.20.1 wsCcRfQosAcTo802dot1pTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfQosAcTo802dot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping of access categories to 802.1p priorities." ::= { wsCcRfQos 1 } -- 1.3.6.1.4.1.388.14.3.2.1.20.1.1 wsCcRfQosAcTo802dot1pEntry OBJECT-TYPE SYNTAX WsCcRfQosAcTo802dot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single mapping of an access category to 802.1p priority." INDEX { wsCcRfQosAcTo802dot1pAccessCategory } ::= { wsCcRfQosAcTo802dot1pTable 1 } WsCcRfQosAcTo802dot1pEntry ::= SEQUENCE { wsCcRfQosAcTo802dot1pAccessCategory TrafficIdentifier, wsCcRfQosAcTo802dot1pPriority Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.20.1.1.1 wsCcRfQosAcTo802dot1pAccessCategory OBJECT-TYPE SYNTAX TrafficIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "An access category." ::= { wsCcRfQosAcTo802dot1pEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.20.1.1.2 wsCcRfQosAcTo802dot1pPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "An 802.1p priority tag." ::= { wsCcRfQosAcTo802dot1pEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.20.2 wsCcRfQos802dot1pToAcTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfQos802dot1pToAcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping of 802.1p priorities to access categories ." ::= { wsCcRfQos 2 } -- 1.3.6.1.4.1.388.14.3.2.1.20.2.1 wsCcRfQos802dot1pToAcEntry OBJECT-TYPE SYNTAX WsCcRfQos802dot1pToAcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single mapping of an 802.1p priority to an access category." INDEX { wsCcRfQos802dot1pToAcIndex } ::= { wsCcRfQos802dot1pToAcTable 1 } WsCcRfQos802dot1pToAcEntry ::= SEQUENCE { wsCcRfQos802dot1pToAcIndex Integer32, wsCcRfQos802dot1pToAcPriority Integer32, wsCcRfQos802dot1pToAcAccessCategory TrafficIdentifier } -- 1.3.6.1.4.1.388.14.3.2.1.20.2.1.1 wsCcRfQos802dot1pToAcIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A simple sequential index." ::= { wsCcRfQos802dot1pToAcEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.20.2.1.2 wsCcRfQos802dot1pToAcPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "An 802.1p priority tag." ::= { wsCcRfQos802dot1pToAcEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.20.2.1.3 wsCcRfQos802dot1pToAcAccessCategory OBJECT-TYPE SYNTAX TrafficIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "An access category." ::= { wsCcRfQos802dot1pToAcEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.20.3 wsCcRfQosDscpToAcTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfQosDscpToAcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping of DSCP values to access categories." ::= { wsCcRfQos 3 } -- 1.3.6.1.4.1.388.14.3.2.1.20.3.1 wsCcRfQosDscpToAcEntry OBJECT-TYPE SYNTAX WsCcRfQosDscpToAcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single mapping of a DSCP value to an access category." INDEX { wsCcRfQosDscpToAcIndex } ::= { wsCcRfQosDscpToAcTable 1 } WsCcRfQosDscpToAcEntry ::= SEQUENCE { wsCcRfQosDscpToAcIndex Integer32, wsCcRfQosDscpToAcDscp Integer32, wsCcRfQosDscpToAcAccessCategory TrafficIdentifier } -- 1.3.6.1.4.1.388.14.3.2.1.20.3.1.1 wsCcRfQosDscpToAcIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A simple sequential index." ::= { wsCcRfQosDscpToAcEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.20.3.1.2 wsCcRfQosDscpToAcDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "A DSCP value." ::= { wsCcRfQosDscpToAcEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.20.3.1.3 wsCcRfQosDscpToAcAccessCategory OBJECT-TYPE SYNTAX TrafficIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "An access category." ::= { wsCcRfQosDscpToAcEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.21 wsCcRfWiredWebAuth OBJECT IDENTIFIER ::= { wsCcRfMIB 21 } -- 1.3.6.1.4.1.388.14.3.2.1.21.1 wsCcRfWiredWebAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling of wired web authentication." ::= { wsCcRfWiredWebAuth 1 } -- 1.3.6.1.4.1.388.14.3.2.1.21.2 wsCcRfWiredWebAuthVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Assignment of VLAN to the wired web authentication." ::= { wsCcRfWiredWebAuth 2 } -- 1.3.6.1.4.1.388.14.3.2.1.21.3 wsCcRfWiredWebAuthWlan OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Assignment of WLAN to the wired web authentication." ::= { wsCcRfWiredWebAuth 3 } -- 1.3.6.1.4.1.388.14.3.2.1.21.4 wsCcRfWiredWebAuthHostEntryDelete OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description.Use this object to remove an entry in wsCcRfWiredWebAuthHostTable." ::= { wsCcRfWiredWebAuth 4 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5 wsCcRfWiredWebAuthHostTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWiredWebAuthHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfWiredWebAuth 5 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5.1 wsCcRfWiredWebAuthHostEntry OBJECT-TYPE SYNTAX WsCcRfWiredWebAuthHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfWiredWebAuthHostIndex } ::= { wsCcRfWiredWebAuthHostTable 1 } WsCcRfWiredWebAuthHostEntry ::= SEQUENCE { wsCcRfWiredWebAuthHostIndex INTEGER, wsCcRfWiredWebAuthHostMac PhysAddress, wsCcRfWiredWebAuthHostIp IpAddress, wsCcRfWiredWebAuthHostState INTEGER, wsCcRfWiredWebAuthHostVlan Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5.1.1 wsCcRfWiredWebAuthHostIndex OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Description. The index for the wsCcRfWiredWebAuthHostTable." ::= { wsCcRfWiredWebAuthHostEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5.1.2 wsCcRfWiredWebAuthHostMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description.The Mac Address of this wsCcRfWiredWebAuthHostEntry" ::= { wsCcRfWiredWebAuthHostEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5.1.3 wsCcRfWiredWebAuthHostIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description. The IP address of this wsCcRfWiredWebAuthHosEntry" ::= { wsCcRfWiredWebAuthHostEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5.1.4 wsCcRfWiredWebAuthHostState OBJECT-TYPE SYNTAX INTEGER { unused(0), notAuthenticated(5), authenticated(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description.The current state of this wsCcRfWiredWebAuthHostEntry" ::= { wsCcRfWiredWebAuthHostEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.21.5.1.5 wsCcRfWiredWebAuthHostVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description.The Vlan assigned to this wsCcRfWiredWebAuthHostEntry" ::= { wsCcRfWiredWebAuthHostEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.22 wsCcRfLldp OBJECT IDENTIFIER ::= { wsCcRfMIB 22 } -- 1.3.6.1.4.1.388.14.3.2.1.22.1 wsCcRfLldpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP friendly name to be used in LLDP for adopted radio-ports." ::= { wsCcRfLldp 1 } -- 1.3.6.1.4.1.388.14.3.2.1.22.2 wsCcRfLldpApMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Mac address to be associated with LLDP friendly name." ::= { wsCcRfLldp 2 } -- 1.3.6.1.4.1.388.14.3.2.1.22.3 wsCcRfLldpNameSet OBJECT-TYPE SYNTAX INTEGER { idle(1), setLldpNames(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the LLDP friendly name to be used in LLDP for adopted radio-ports. If wsCcRfLldpApMacAddr is not specified, the LLDP friendly name update will be sent to all currently adpoted radio ports. " ::= { wsCcRfLldp 3 } -- 1.3.6.1.4.1.388.14.3.2.1.23 wsCcRfLastAlarmEvent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An event which could be one of the following: AP shut down AP channel configuration is changed Interference on current channel is detected Radius authentication server is unreachable/unavailable/unconnected Radius accounting server cannot be connected Portal server is unavailable AP is disconnected from the network" ::= { wsCcRfMIB 23 } -- 1.3.6.1.4.1.388.14.3.2.1.24 wsCcRfApExt OBJECT IDENTIFIER ::= { wsCcRfMIB 24 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1 wsCcRfApExtTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfApExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfApExt 1 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1 wsCcRfApExtEntry OBJECT-TYPE SYNTAX WsCcRfApExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfApExtApMac } ::= { wsCcRfApExtTable 1 } WsCcRfApExtEntry ::= SEQUENCE { wsCcRfApExtApMac PhysAddress, wsCcRfApExtNetMask IpAddress, wsCcRfApExtTotalInterfaces Unsigned32, wsCcRfApExtApName DisplayString, wsCcRfApExtApLocation DisplayString, wsCcRfApExtSecureModeSecret OCTET STRING, wsCcRfApExtSecureModeEnable TruthValue, wsCcRfApExtSecureModeStagingEnable TruthValue, wsCcRfApExtCountryCode DisplayString, wsCcRfApExtOperStatus INTEGER, wsCcRfApExtLan1NativeVlanTag INTEGER, wsCcRfApExtLan2NativeVlanTag INTEGER, wsCcRfApExtLan1NativeVlanId Unsigned32, wsCcRfApExtRadioConfiguration INTEGER, wsCcRfApExtReload DoActionNow, wsCcRfApExtNetworkElementId DisplayString, wsCcRfApExtApId Integer32, wsCcRfApExtCpuUsageThresh Unsigned32, wsCcRfApExtMemoryUsageThresh Unsigned32, wsCcRfApExtLan1ManagementVlanId Unsigned32, wsCcRfApExtLan1TrunkingEnable INTEGER, wsCcRfApExtIfNumber Integer32, wsCcRfApExtLan1IpFilterRulesIn DisplayString, wsCcRfApExtLan1IpFilterRulesOut DisplayString, wsCcRfApExtMonitorMode INTEGER, wsCcRfApExtInterferingApThresh Unsigned32, wsCcRfApExtInterferingMuThresh Unsigned32, wsCcRfApExtMfgCountryCode DisplayString, wsCcRfApExtSyslogServerEnable TruthValue, wsCcRfApExtSyslogServerLevel INTEGER, wsCcRfApExtSyslogServerIpAddr IpAddress, wsCcRfApExtLEDStatus INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.1 wsCcRfApExtApMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { wsCcRfApExtEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.2 wsCcRfApExtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network mask of this Access port." ::= { wsCcRfApExtEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.3 wsCcRfApExtTotalInterfaces OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of physical interfaces of this Access port." ::= { wsCcRfApExtEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.4 wsCcRfApExtApName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the AP." ::= { wsCcRfApExtEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.5 wsCcRfApExtApLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The location of the AP." ::= { wsCcRfApExtEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.6 wsCcRfApExtSecureModeSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a shared secret for an AP." ::= { wsCcRfApExtEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.7 wsCcRfApExtSecureModeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure secured mode for this AP. If secure-mode is set to enable it means that the WISP-e for this AP will be secured." ::= { wsCcRfApExtEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.8 wsCcRfApExtSecureModeStagingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure secure mode staging to an AP. In this mode the switch will send configured shared secret in the clear in the Join response to the AP." ::= { wsCcRfApExtEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.9 wsCcRfApExtCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0 | 2)) MAX-ACCESS read-write STATUS current DESCRIPTION "The country code of the Access Port/Point. Please refer to the object wsCcRfCountryCode for the supported country codes." ::= { wsCcRfApExtEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.10 wsCcRfApExtOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), downloadingImage(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the AP. up : AP is up, i.e. at least one of the radio in the AP is adopted. down : AP is down, i.e. none of the radios in the AP are adopted. downloadingImage : AP is downloading image." ::= { wsCcRfApExtEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.11 wsCcRfApExtLan1NativeVlanTag OBJECT-TYPE SYNTAX INTEGER { na(0), tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Native VLAN tag configuration for the LAN-1 interface of the Access Port/Point. na : This object is not applicable for the AP. tagged : Native VLAN is tagged untagged : Native VLAN is untagged Write access is supported only for some models of Adaptive Access Points. The values that can be written are tagged and untagged." DEFVAL { tagged } ::= { wsCcRfApExtEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.12 wsCcRfApExtLan2NativeVlanTag OBJECT-TYPE SYNTAX INTEGER { na(0), tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Native VLAN tag configuration for the LAN-2 interface of the Access Port/Point. na : This object is not applicable for the AP. tagged : Native VLAN is tagged untagged : Native VLAN is untagged Write access is supported only for some models of Adaptive Access Points. The values that can be written are tagged and untagged." DEFVAL { tagged } ::= { wsCcRfApExtEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.17 wsCcRfApExtLan1NativeVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Native VLAN identifier for the LAN-1 interface of the Access Port/Point. Write access is supported only for some models of Adaptive Access Points." DEFVAL { 1 } ::= { wsCcRfApExtEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.18 wsCcRfApExtRadioConfiguration OBJECT-TYPE SYNTAX INTEGER { abgnWlanAndSensor(1), bgnWlanAndSensor(2), anWlanAndSensor(3), abgnWlanOnlyNoSensor(4), sensorOnlySpectrumAnalysisModeNoWlan(5), bgnWlanNoSensor(6), anWlanNoSensor(7), radiosOff(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The quick-setup options that can be selected to speedily set the function on one or more radios on the AP. Note that quick-setup option abgnWlanAndSensor(1) is available only in the tri-radio SKU. The two-radio SKU permits only options 2 through 8. The single-radio SKU permits only options 5 through 8. Note also that the setting of some of the options may fail due to the power management configuration being inconsistent with the minimum power requirements for those options." ::= { wsCcRfApExtEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.19 wsCcRfApExtReload OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Set this object to 1 to halt and warm reboot this Access Port." DEFVAL { 2 } ::= { wsCcRfApExtEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.20 wsCcRfApExtNetworkElementId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively-assigned name for this AP." ::= { wsCcRfApExtEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.21 wsCcRfApExtApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfApExtEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.22 wsCcRfApExtCpuUsageThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "The usage threshold expressed in percents for comparing the CPU usage and initiating an alarm if the threshold is exceeded." DEFVAL { 100 } ::= { wsCcRfApExtEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.23 wsCcRfApExtMemoryUsageThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "The usage threshold expressed in percents for comparing the memory usage and initiating an alarm if the threshold is exceeded." DEFVAL { 100 } ::= { wsCcRfApExtEntry 23 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.24 wsCcRfApExtLan1ManagementVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Management VLAN identifier for the LAN-1 interface of the Access Port/Point. Write access is supported only for some models of Adaptive Access Points." DEFVAL { 1 } ::= { wsCcRfApExtEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.25 wsCcRfApExtLan1TrunkingEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trunking for the LAN-1 interface of the Access Port/Point. enable: Trunking is enabled. disable: Trunking is disabled. Write access is supported only for some models of Adaptive Access Points." DEFVAL { disable } ::= { wsCcRfApExtEntry 25 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.26 wsCcRfApExtIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of network interfaces including wireless (regardless of their current state) present on this AP." ::= { wsCcRfApExtEntry 26 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.27 wsCcRfApExtLan1IpFilterRulesIn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Lan1 ip filter rule numbers applied in order, separated by commas, to inbound traffic." ::= { wsCcRfApExtEntry 27 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.28 wsCcRfApExtLan1IpFilterRulesOut OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Lan1 ip filter rule numbers applied in order, separated by commas, to outbound traffic." ::= { wsCcRfApExtEntry 28 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.29 wsCcRfApExtMonitorMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), semiMonitor(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wireless network surveillance mode: normal : AP to provide WLAN access monitor : AP monitors wireless networks semiMonitor : Provide WLAN access and during free time monitor wireless networks" ::= { wsCcRfApExtEntry 29 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.30 wsCcRfApExtInterferingApThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for number of neighbor APs that interferes with this AP; an alarm will be generated if the number of interfering AP is more than this threshold. " DEFVAL { 1 } ::= { wsCcRfApExtEntry 30 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.31 wsCcRfApExtInterferingMuThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for number of surrounding unknown stations that interferes with the operation of this AP; an alarm will be generated if the number of interfering stations is more than this threshold. " DEFVAL { 1 } ::= { wsCcRfApExtEntry 31 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.32 wsCcRfApExtMfgCountryCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturing country code send from AP while Discovery/Join Request, US or WW." ::= { wsCcRfApExtEntry 32 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.33 wsCcRfApExtSyslogServerEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable sys logging for Adaptive Access Points." DEFVAL { false } ::= { wsCcRfApExtEntry 33 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.34 wsCcRfApExtSyslogServerLevel OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Sys logging level for Adaptive Access Points. This value can be set only when sys logging is enabled." ::= { wsCcRfApExtEntry 34 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.35 wsCcRfApExtSyslogServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ip address of sys logging for Adaptive Access Points." ::= { wsCcRfApExtEntry 35 } -- 1.3.6.1.4.1.388.14.3.2.1.24.1.1.36 wsCcRfApExtLEDStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable LEDs for Adaptive Access Points." ::= { wsCcRfApExtEntry 36 } -- 1.3.6.1.4.1.388.14.3.2.1.24.2 wsCcRfApExtSecureWispeDefSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure default shared secret for secure wisp-e." ::= { wsCcRfApExt 2 } -- 1.3.6.1.4.1.388.14.3.2.1.25 wsCcRfSwitchManufacturer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer of the switch or AC (access controller)" ::= { wsCcRfMIB 25 } -- 1.3.6.1.4.1.388.14.3.2.1.26 wsCcRfApConvert OBJECT IDENTIFIER ::= { wsCcRfMIB 26 } -- 1.3.6.1.4.1.388.14.3.2.1.26.1 wsCcRfApConvertIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The valid AP index to be converted. " ::= { wsCcRfApConvert 1 } -- 1.3.6.1.4.1.388.14.3.2.1.26.2 wsCcRfApConvertType OBJECT-TYPE SYNTAX INTEGER { default(1), sensor(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Convert AP to default or sensor." ::= { wsCcRfApConvert 2 } -- 1.3.6.1.4.1.388.14.3.2.1.26.3 wsCcRfApConvertAction OBJECT-TYPE SYNTAX INTEGER { none(1), doAction(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Both wsCcRfApConvertIndex and wsCcRfApConvertType should be properly set before setting this object. " ::= { wsCcRfApConvert 3 } -- 1.3.6.1.4.1.388.14.3.2.1.27 wsCcRfSensor OBJECT IDENTIFIER ::= { wsCcRfMIB 27 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1 wsCcRfSensorRevert OBJECT IDENTIFIER ::= { wsCcRfSensor 1 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.1 wsCcRfSensorRevertIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The valid sensor index to be reverted to AP." ::= { wsCcRfSensorRevert 1 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.2 wsCcRfSensorRevertAction OBJECT-TYPE SYNTAX INTEGER { none(1), doAction(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "wsCcRfSensorRevertIndex should be properly set before setting this object." ::= { wsCcRfSensorRevert 2 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.3 wsCcRfSensorRevertVlan OBJECT-TYPE SYNTAX INTEGER (0 | 1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure vlans where sensors are to be discovered. 0 indicates no vlans exists." ::= { wsCcRfSensorRevert 3 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4 wsCcRfSensorRevertSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSensorRevertSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of sensors that were previoulsy converted from APs." ::= { wsCcRfSensorRevert 4 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4.1 wsCcRfSensorRevertSensorEntry OBJECT-TYPE SYNTAX WsCcRfSensorRevertSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfSensorRevertSensorIndex } ::= { wsCcRfSensorRevertSensorTable 1 } WsCcRfSensorRevertSensorEntry ::= SEQUENCE { wsCcRfSensorRevertSensorIndex INTEGER, wsCcRfSensorRevertSensorMac PhysAddress, wsCcRfSensorRevertSensorVlan Integer32, wsCcRfSensorRevertSensorIp IpAddress, wsCcRfSensorRevertSensorLastHeard Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.1 wsCcRfSensorRevertSensorIndex OBJECT-TYPE SYNTAX INTEGER (1..500) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sensor index." ::= { wsCcRfSensorRevertSensorEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.2 wsCcRfSensorRevertSensorMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The physical address of this sensor." ::= { wsCcRfSensorRevertSensorEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.3 wsCcRfSensorRevertSensorVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The assinged Vlan ID for this sensor." ::= { wsCcRfSensorRevertSensorEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.4 wsCcRfSensorRevertSensorIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of this sensor." ::= { wsCcRfSensorRevertSensorEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.5 wsCcRfSensorRevertSensorLastHeard OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds since last heard from the sensor." ::= { wsCcRfSensorRevertSensorEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.27.1.5 wsCcRfSensorRevertPingInterval OBJECT-TYPE SYNTAX INTEGER (2..60) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between successive pings to sensors on the network." ::= { wsCcRfSensorRevert 5 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2 wsCcRfSensorCfg OBJECT IDENTIFIER ::= { wsCcRfSensor 2 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.1 wsCcRfSensorCfgWipsServerPrimaryIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The primary IP address of the WIPS server" ::= { wsCcRfSensorCfg 1 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.2 wsCcRfSensorCfgWipsServerSecondaryIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The secondary IP address of the WIPS server" ::= { wsCcRfSensorCfg 2 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.3 wsCcRfSensorCfgIpMode OBJECT-TYPE SYNTAX INTEGER { static(1), dhcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address mode of the sensor. The default value is 'dhcp'." ::= { wsCcRfSensorCfg 3 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.4 wsCcRfSensorCfgStaticIp OBJECT IDENTIFIER ::= { wsCcRfSensorCfg 4 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.4.1 wsCcRfSensorCfgStaticIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Static IP address of the sensor." ::= { wsCcRfSensorCfgStaticIp 1 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.4.2 wsCcRfSensorCfgStaticIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask associated with the static IP address of the sensor." ::= { wsCcRfSensorCfgStaticIp 2 } -- 1.3.6.1.4.1.388.14.3.2.1.27.2.4.3 wsCcRfSensorCfgStaticIpDefaultGw OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of the default gateway for the sensor." ::= { wsCcRfSensorCfgStaticIp 3 } -- Smart-RF Management. -- 1.3.6.1.4.1.388.14.3.2.1.28 wsCcRfSmart OBJECT IDENTIFIER ::= { wsCcRfMIB 28 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1 wsCcRfSmartEnable OBJECT IDENTIFIER ::= { wsCcRfSmart 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.1 wsCcRfSmartEnableSmartRF OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Smart-RF functionality." ::= { wsCcRfSmartEnable 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.2 wsCcRfSmartEnableDetectorAssign OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable automatic assignment of radio detectors." ::= { wsCcRfSmartEnable 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.3 wsCcRfSmartEnableChannelAssign OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable automatic assignment of channels to working radios to avoid channel overlap and avoid interference from external RF sources." ::= { wsCcRfSmartEnable 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.4 wsCcRfSmartEnablePowerAssign OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable automatic assignment of transmit power." ::= { wsCcRfSmartEnable 4 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.5 wsCcRfSmartEnableRescuerAssign OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable automatic assignment of rescuers along with rescuing power." ::= { wsCcRfSmartEnable 5 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.6 wsCcRfSmartEnableFaultyRadioRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable monitoring for defective radio and self-healing by its rescuer." ::= { wsCcRfSmartEnable 6 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.7 wsCcRfSmartEnableInterferenceRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable monitoring for interference and self-healing it by rescuer." ::= { wsCcRfSmartEnable 7 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.8 wsCcRfSmartEnableCoverageHoleRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable monitoring and recovering for coverage hole." ::= { wsCcRfSmartEnable 8 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.9 wsCcRfSmartEnableScheduledCalibration OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable scheduled Smart-RF calibration." ::= { wsCcRfSmartEnable 9 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.10 wsCcRfSmartEnableVerboseMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables RF smart verbose mode." ::= { wsCcRfSmartEnable 10 } -- 1.3.6.1.4.1.388.14.3.2.1.28.1.11 wsCcRfSmartEnableExtensiveScanMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables RF smart extensive scan mode." ::= { wsCcRfSmartEnable 11 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2 wsCcRfSmartRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSmartRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of radio specific configuration for Smart-RF Management." ::= { wsCcRfSmart 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1 wsCcRfSmartRadioEntry OBJECT-TYPE SYNTAX WsCcRfSmartRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfSmartRadioMac } ::= { wsCcRfSmartRadioTable 1 } WsCcRfSmartRadioEntry ::= SEQUENCE { wsCcRfSmartRadioMac PhysAddress, wsCcRfSmartRadioCfgIndex Integer32, wsCcRfSmartRadioEnableDetectorLock TruthValue, wsCcRfSmartRadioEnableChannelLock TruthValue, wsCcRfSmartRadioEnablePowerLock TruthValue, wsCcRfSmartRadioEnableRescuerLock TruthValue, wsCcRfSmartRadioAntGain RadioAntennaGain, wsCcRfSmartRadioCovRate TransmitRate, wsCcRfSmartRadioSwichIpAddr IpAddress, wsCcRfSmartRadioCurrChannel Unsigned32, wsCcRfSmartRadioCurrPower INTEGER, wsCcRfSmartRadioApId Integer32, wsCcRfSmartRadioAntGainDbi Integer32, wsCcRfSmartRadioChannelWidth INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.1 wsCcRfSmartRadioMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the radio." ::= { wsCcRfSmartRadioEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.2 wsCcRfSmartRadioCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration index for this radio." ::= { wsCcRfSmartRadioEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.3 wsCcRfSmartRadioEnableDetectorLock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable radio detector mode lock of this radio." DEFVAL { true } ::= { wsCcRfSmartRadioEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.4 wsCcRfSmartRadioEnableChannelLock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable channel lock of this radio." DEFVAL { true } ::= { wsCcRfSmartRadioEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.5 wsCcRfSmartRadioEnablePowerLock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable power lock of this radio." DEFVAL { true } ::= { wsCcRfSmartRadioEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.6 wsCcRfSmartRadioEnableRescuerLock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable rescuer lock of this radio." DEFVAL { true } ::= { wsCcRfSmartRadioEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.7 wsCcRfSmartRadioAntGain OBJECT-TYPE SYNTAX RadioAntennaGain UNITS "0.1dBi" MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna gain. Please see the definition of RadioAntennaGain for additional information." ::= { wsCcRfSmartRadioEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.8 wsCcRfSmartRadioCovRate OBJECT-TYPE SYNTAX TransmitRate MAX-ACCESS read-write STATUS current DESCRIPTION "The desired coverage rate." DEFVAL { { rate18Mb } } ::= { wsCcRfSmartRadioEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.9 wsCcRfSmartRadioSwichIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the switch this radio is adopted." ::= { wsCcRfSmartRadioEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.10 wsCcRfSmartRadioCurrChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current channel (may be different from configured channel due to DFS etc). A value of 0 for this object implies that the radio is not adopted." ::= { wsCcRfSmartRadioEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.11 wsCcRfSmartRadioCurrPower OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The output power level for the radio in dBm. A value of 0 for this object implies that the radio is not adopted." ::= { wsCcRfSmartRadioEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.12 wsCcRfSmartRadioApId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the AP." ::= { wsCcRfSmartRadioEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.13 wsCcRfSmartRadioAntGainDbi OBJECT-TYPE SYNTAX Integer32 UNITS "dBi" MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna gain in dbi." ::= { wsCcRfSmartRadioEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.28.2.1.14 wsCcRfSmartRadioChannelWidth OBJECT-TYPE SYNTAX INTEGER { auto(1), dual(2), single(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radio Channel Width option as below: 1. auto channel-width - let smart-rf figure out the best channel-width 2. dual channel-width - 40 MHz 3. single channel-width - 20MHz." DEFVAL { auto } ::= { wsCcRfSmartRadioEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.28.3 wsCcRfSmartRadioRetryThrshld OBJECT-TYPE SYNTAX INTEGER (0..150) UNITS "average retries/packet * 10" MAX-ACCESS read-write STATUS current DESCRIPTION "Retry threshold is the average number of retries per packet to cause a radio to re-run channel selection. The range in the CLI is 0.0 to 15.0. Since SNMP does not support decimal numbers, the range for this object is 0 to 150 and the set value would be divided by 10 by the smart-rf module." ::= { wsCcRfSmart 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.4 wsCcRfSmartRescuerTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSmartRescuerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to assign rescuers for radios. Up to 5 rescuers per radio can be assigned." ::= { wsCcRfSmart 4 } -- 1.3.6.1.4.1.388.14.3.2.1.28.4.1 wsCcRfSmartRescuerEntry OBJECT-TYPE SYNTAX WsCcRfSmartRescuerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfSmartRadioMac, wsCcRfSmartRescuerMac } ::= { wsCcRfSmartRescuerTable 1 } WsCcRfSmartRescuerEntry ::= SEQUENCE { wsCcRfSmartRescuerMac PhysAddress, wsCcRfSmartRescuerPowerBoost Unsigned32, wsCcRfSmartRescuerAttenuation Unsigned32, wsCcRfSmartRescuerRowStatus AbbrevRowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.28.4.1.1 wsCcRfSmartRescuerMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Radio MAC of rescuer." ::= { wsCcRfSmartRescuerEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.4.1.2 wsCcRfSmartRescuerPowerBoost OBJECT-TYPE SYNTAX Unsigned32 (4..20) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "Power raised by the rescuer to cover the radio's coverage, if the radio becomes defective." ::= { wsCcRfSmartRescuerEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.4.1.3 wsCcRfSmartRescuerAttenuation OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Attenuation from the rescuer radio to this radio. This column is optional." DEFVAL { 0 } ::= { wsCcRfSmartRescuerEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.4.1.4 wsCcRfSmartRescuerRowStatus OBJECT-TYPE SYNTAX AbbrevRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The Row status. All columns except wsCcRfSmartRescuerAttenuation must be supplied to create a row. The agent itself may also create and/or delete rows, when Smart-RF calibration runs." ::= { wsCcRfSmartRescuerEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.28.5 wsCcRfSmartFaultyRadioNumRescuers OBJECT-TYPE SYNTAX Unsigned32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of rescuers to cover a faulty radio." ::= { wsCcRfSmart 5 } -- Smart-RF Calibration. -- 1.3.6.1.4.1.388.14.3.2.1.28.6 wsCcRfSmartCalibration OBJECT IDENTIFIER ::= { wsCcRfSmart 6 } -- Smart-RF Calibration Schedule. -- 1.3.6.1.4.1.388.14.3.2.1.28.6.1 wsCcRfSmartCalibrationSched OBJECT IDENTIFIER ::= { wsCcRfSmartCalibration 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.6.1.1 wsCcRfSmartCalibrationSchedStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The start-time of the Smart-RF Calibration schedule. It does not have to be a future time." ::= { wsCcRfSmartCalibrationSched 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.6.1.2 wsCcRfSmartCalibrationSchedIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..366) UNITS "Day" MAX-ACCESS read-write STATUS current DESCRIPTION "Smart-RF Calibration schedule interval." ::= { wsCcRfSmartCalibrationSched 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.6.2 wsCcRfSmartCalibrationStart OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Start a new Smart-RF calibration. If calibration fails, wsCcRfSmartCalibrationLastFailedReason will have the reason." ::= { wsCcRfSmartCalibration 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.6.3 wsCcRfSmartCalibrationLastFailedReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Last calibration failed reason." ::= { wsCcRfSmartCalibration 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.6.4 wsCcRfSmartCalibrationStatusMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A message giving the current status of the calibration being performed at the master switch." ::= { wsCcRfSmartCalibration 4 } -- Smart-RF Status. -- 1.3.6.1.4.1.388.14.3.2.1.28.7 wsCcRfSmartStatus OBJECT IDENTIFIER ::= { wsCcRfSmart 7 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.1 wsCcRfSmartStatusLastCalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the last Smart-RF calibration started." ::= { wsCcRfSmartStatus 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.2 wsCcRfSmartStatusLastCalEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the last Smart-RF calibration ended." ::= { wsCcRfSmartStatus 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.3 wsCcRfSmartStatusNextCalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the next Smart-RF calibration starts." ::= { wsCcRfSmartStatus 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.4 wsCcRfSmartStatusCurrOper OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Smart-RF operation being done." ::= { wsCcRfSmartStatus 4 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.5 wsCcRfSmartStatusAssignmentTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSmartStatusAssignmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Smart RF assignment history since last calibration." ::= { wsCcRfSmartStatus 5 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.5.1 wsCcRfSmartStatusAssignmentEntry OBJECT-TYPE SYNTAX WsCcRfSmartStatusAssignmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { wsCcRfSmartStatusAssignmentIndex } ::= { wsCcRfSmartStatusAssignmentTable 1 } WsCcRfSmartStatusAssignmentEntry ::= SEQUENCE { wsCcRfSmartStatusAssignmentIndex Unsigned32, wsCcRfSmartStatusAssignmentEvent DisplayString } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.5.1.1 wsCcRfSmartStatusAssignmentIndex OBJECT-TYPE SYNTAX Unsigned32 (1..5120) MAX-ACCESS read-only STATUS current DESCRIPTION "The assignment history sequence number." ::= { wsCcRfSmartStatusAssignmentEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.5.1.2 wsCcRfSmartStatusAssignmentEvent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Smart RF assignment event." ::= { wsCcRfSmartStatusAssignmentEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.6 wsCcRfSmartMasterSwitchAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the master switch. This information is obtained from the clustering daemon and is therefore read-only." ::= { wsCcRfSmartStatus 6 } -- 1.3.6.1.4.1.388.14.3.2.1.28.7.7 wsCcRfSmartIsClusterMaster OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A boolean to represent whether this switch is the cluster master. This information is obtained from the clustering daemon and is therefore read-only." ::= { wsCcRfSmartStatus 7 } -- 1.3.6.1.4.1.388.14.3.2.1.28.8 wsCcRfSmartScanDwellTime OBJECT-TYPE SYNTAX INTEGER (1..10) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "RF smart scan dwell time." ::= { wsCcRfSmart 8 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9 wsCcRfSmartRadioNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSmartRadioNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table giving details of a radio's neighborhood information." ::= { wsCcRfSmart 9 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1 wsCcRfSmartRadioNeighborEntry OBJECT-TYPE SYNTAX WsCcRfSmartRadioNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the neighbor table, indexed by a. the MAC address of the radio b. neighbor index c. tx power" INDEX { wsCcRfSmartRadioMac, wsCcRfSmartRadioNeighborIndex, wsCcRfSmartRadioNeighborTxPower } ::= { wsCcRfSmartRadioNeighborTable 1 } WsCcRfSmartRadioNeighborEntry ::= SEQUENCE { wsCcRfSmartRadioNeighborIndex INTEGER, wsCcRfSmartRadioNeighborTxPower INTEGER, wsCcRfSmartRadioNeighborCfgIdx Unsigned32, wsCcRfSmartRadioNeighborRxSignal Integer32, wsCcRfSmartRadioNeighborAttenuation Integer32, wsCcRfSmartRadioNeighborMac PhysAddress } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1.2 wsCcRfSmartRadioNeighborIndex OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor index." ::= { wsCcRfSmartRadioNeighborEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1.3 wsCcRfSmartRadioNeighborTxPower OBJECT-TYPE SYNTAX INTEGER (4..20) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Tx power of the neighbor radio." ::= { wsCcRfSmartRadioNeighborEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1.4 wsCcRfSmartRadioNeighborCfgIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration index of the neighbor radio, taken from its index in the wsCcRfRadioTable." ::= { wsCcRfSmartRadioNeighborEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1.5 wsCcRfSmartRadioNeighborRxSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Rx signal strength of the neighbor radio for the given tx power." ::= { wsCcRfSmartRadioNeighborEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1.6 wsCcRfSmartRadioNeighborAttenuation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation of the neighbor radio for the given tx power." ::= { wsCcRfSmartRadioNeighborEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.28.9.1.7 wsCcRfSmartRadioNeighborMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the neighbor radio." ::= { wsCcRfSmartRadioNeighborEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.28.10 wsCcRfSmartPowerRangeLowerBound OBJECT-TYPE SYNTAX Unsigned32 (4..20) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Lower bound of the transmit power range for automatic assignment." ::= { wsCcRfSmart 10 } -- 1.3.6.1.4.1.388.14.3.2.1.28.11 wsCcRfSmartPowerRangeHigherBound OBJECT-TYPE SYNTAX Unsigned32 (4..20) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Higher bound of the transmit power range for automatic assignment." ::= { wsCcRfSmart 11 } -- 1.3.6.1.4.1.388.14.3.2.1.28.12 wsCcRfSmartRadioHoldTime OBJECT-TYPE SYNTAX INTEGER (30..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to disable interference avoidance after a detection. This prevents a radio from changing channels continuously." ::= { wsCcRfSmart 12 } -- 1.3.6.1.4.1.388.14.3.2.1.29 wsCcRfMasterSyncEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the master-sync feature." ::= { wsCcRfMIB 29 } -- 1.3.6.1.4.1.388.14.3.2.1.30 wsCcRfChannelManager OBJECT IDENTIFIER ::= { wsCcRfMIB 30 } -- 1.3.6.1.4.1.388.14.3.2.1.30.1 wsCcRfChannelManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfChannelManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table where the smart-rf and smart-scan capability of each channel can be configured." ::= { wsCcRfChannelManager 1 } -- 1.3.6.1.4.1.388.14.3.2.1.30.1.1 wsCcRfChannelManagerEntry OBJECT-TYPE SYNTAX WsCcRfChannelManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in wsCcRfChannelManagerTable." INDEX { wsCcRfChannelManagerChan } ::= { wsCcRfChannelManagerTable 1 } WsCcRfChannelManagerEntry ::= SEQUENCE { wsCcRfChannelManagerChan INTEGER, wsCcRfChannelManagerSmartRfSel TruthValue, wsCcRfChannelManagerSmartScanSel TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.30.1.1.1 wsCcRfChannelManagerChan OBJECT-TYPE SYNTAX INTEGER (1..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel number" ::= { wsCcRfChannelManagerEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.30.1.1.2 wsCcRfChannelManagerSmartRfSel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether smart RF is selected for this channel." ::= { wsCcRfChannelManagerEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.30.1.1.3 wsCcRfChannelManagerSmartScanSel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether smart scan is selected for this channel." ::= { wsCcRfChannelManagerEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.30.2 wsCcRfSmartScanWlanMapTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfSmartScanWlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table giving the mapping of radio channels per WLAN with respect to their smart-scan capability." ::= { wsCcRfChannelManager 2 } -- 1.3.6.1.4.1.388.14.3.2.1.30.2.1 wsCcRfSmartScanWlanMapEntry OBJECT-TYPE SYNTAX WsCcRfSmartScanWlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfSmartScanWlanMapTable." INDEX { wsCcRfChannelManagerChan, wsCcRfSmartScanWlanMapWlan } ::= { wsCcRfSmartScanWlanMapTable 1 } WsCcRfSmartScanWlanMapEntry ::= SEQUENCE { wsCcRfSmartScanWlanMapWlan INTEGER, wsCcRfSmartScanWlanMapSmartScanSel TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.30.2.1.1 wsCcRfSmartScanWlanMapWlan OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The wlan number for the smart scan channel map" ::= { wsCcRfSmartScanWlanMapEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.30.2.1.2 wsCcRfSmartScanWlanMapSmartScanSel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether smart scan is selected for this channel/wlan combination." ::= { wsCcRfSmartScanWlanMapEntry 2 } -- The 802.11K specification related parameters. -- 1.3.6.1.4.1.388.14.3.2.1.31 wsCcRfDot11k OBJECT IDENTIFIER ::= { wsCcRfMIB 31 } -- 1.3.6.1.4.1.388.14.3.2.1.31.1 wsCcRfDot11kRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfDot11kRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio related Configuration for RRM 802.11k." ::= { wsCcRfDot11k 1 } -- 1.3.6.1.4.1.388.14.3.2.1.31.1.1 wsCcRfDot11kRadioEntry OBJECT-TYPE SYNTAX WsCcRfDot11kRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfDot11kRadioTable." INDEX { wsCcRfRadioIndex } ::= { wsCcRfDot11kRadioTable 1 } WsCcRfDot11kRadioEntry ::= SEQUENCE { wsCcRfDot11kRadioEnable TruthValue, wsCcRfDot11kRadioQuietEnable TruthValue, wsCcRfDot11kRadioQuietElementDuration Integer32, wsCcRfDot11kRadioQuietElementFrequency Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.31.1.1.1 wsCcRfDot11kRadioEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Boolean Value to enable/disable RRM." ::= { wsCcRfDot11kRadioEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.31.1.1.2 wsCcRfDot11kRadioQuietEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsCcRfDot11kRadioEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.31.1.1.3 wsCcRfDot11kRadioQuietElementDuration OBJECT-TYPE SYNTAX Integer32 (0 | 30..150) UNITS "TUs" MAX-ACCESS read-write STATUS current DESCRIPTION "Duration of Quiet element in TUs." ::= { wsCcRfDot11kRadioEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.31.1.1.4 wsCcRfDot11kRadioQuietElementFrequency OBJECT-TYPE SYNTAX Integer32 (0 | 200..255) UNITS "Number of Beacons" MAX-ACCESS read-write STATUS current DESCRIPTION "Quiet Element will be present in sent out beacon with the specified frequency." ::= { wsCcRfDot11kRadioEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.31.2 wsCcRfDot11kMuTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfDot11kMuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MU related configuration for RRM 802.11K." ::= { wsCcRfDot11k 2 } -- 1.3.6.1.4.1.388.14.3.2.1.31.2.1 wsCcRfDot11kMuEntry OBJECT-TYPE SYNTAX WsCcRfDot11kMuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wsCcRfDot11kMuTable." INDEX { wsCcRfMuMac } ::= { wsCcRfDot11kMuTable 1 } WsCcRfDot11kMuEntry ::= SEQUENCE { wsCcRfDot11kMuBeaconRequest TruthValue, wsCcRfDot11kMuMeasurementDuration Integer32 } -- 1.3.6.1.4.1.388.14.3.2.1.31.2.1.1 wsCcRfDot11kMuBeaconRequest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Boolean Value, send beacon request if it's True. This node will be more useful once the Beacon request is to be triggered more than once after certain interval. So that user can start/stop this mechanism. Righ now It's just sending once." ::= { wsCcRfDot11kMuEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.31.2.1.2 wsCcRfDot11kMuMeasurementDuration OBJECT-TYPE SYNTAX Integer32 (500..10000) UNITS "K-us" MAX-ACCESS read-write STATUS current DESCRIPTION "Measurement Duration to be used in Beacon Request. The unit is TUs." ::= { wsCcRfDot11kMuEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.32 wsCcRfWapi OBJECT IDENTIFIER ::= { wsCcRfMIB 32 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1 wsCcRfWapiRadio OBJECT IDENTIFIER ::= { wsCcRfWapi 1 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1 wsCcRfWapiRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWapiRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains WAPI configuration for radios. A row in this table is an extension of a row in wsCcRfRadioTable with the relationship being one-to-one." ::= { wsCcRfWapiRadio 1 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1 wsCcRfWapiRadioEntry OBJECT-TYPE SYNTAX WsCcRfWapiRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." AUGMENTS { wsCcRfRadioEntry } ::= { wsCcRfWapiRadioTable 1 } WsCcRfWapiRadioEntry ::= SEQUENCE { wsCcRfWapiRadioEncEnable TruthValue, wsCcRfWapiRadioEnable TruthValue, wsCcRfWapiRadioVersion Integer32, wsCcRfWapiRadioMultiAccess TruthValue, wsCcRfWapiRadioControlledAuthControl TruthValue, wsCcRfWapiRadioControlledPortControl INTEGER, wsCcRfWapiRadioOptionImplemented TruthValue, wsCcRfWapiRadioPreauthImplemented TruthValue, wsCcRfWapiRadioPreauthEnabled TruthValue, wsCcRfWapiRadioUnicastKeysSupported Unsigned32, wsCcRfWapiRadioUnicastCipherEnabled TruthValue, wsCcRfWapiRadioUnicastCipherSize Unsigned32, wsCcRfWapiRadioUnicastCipherRequested OCTET STRING, wsCcRfWapiRadioUnicastCipherSelected OCTET STRING, wsCcRfWapiRadioMulticastCipher OCTET STRING, wsCcRfWapiRadioMulticastCipherSize Unsigned32, wsCcRfWapiRadioGroupCipherRequested OCTET STRING, wsCcRfWapiRadioMulticastCipherSelected OCTET STRING, wsCcRfWapiRadioBKIDUsed OCTET STRING, wsCcRfWapiRadioAuthSuite OCTET STRING, wsCcRfWapiRadioAuthSuiteEnabled TruthValue, wsCcRfWapiRadioAuthSuiteRequested OCTET STRING, wsCcRfWapiRadioAuthSuiteSelected OCTET STRING, wsCcRfWapiRadioAuthServerType INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.1 wsCcRfWapiRadioEncEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the radio has WAPI encryption enabled." ::= { wsCcRfWapiRadioEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.2 wsCcRfWapiRadioEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the radio has WAPI enabled." ::= { wsCcRfWapiRadioEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.3 wsCcRfWapiRadioVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest WAPI version supported." ::= { wsCcRfWapiRadioEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.4 wsCcRfWapiRadioMultiAccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the radio supports multi access mode (802.11a and 802.11b)." ::= { wsCcRfWapiRadioEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.5 wsCcRfWapiRadioControlledAuthControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether authentication control is enabled." ::= { wsCcRfWapiRadioEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.6 wsCcRfWapiRadioControlledPortControl OBJECT-TYPE SYNTAX INTEGER { authResult(0), unauth(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Controlled Port status control. authResult : Status of controlled port depends on authentication result. unauth : Status of controlled port is unauthenticated. Please note that this enumeration starts at 0 to match values in the WAPI standard." ::= { wsCcRfWapiRadioEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.7 wsCcRfWapiRadioOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the radio is WAPI-capable." ::= { wsCcRfWapiRadioEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.8 wsCcRfWapiRadioPreauthImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the radio supports WAPI pre-authentication. This cannot be true unless wsCcRfWapiRadioOptionImplemented is true." ::= { wsCcRfWapiRadioEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.9 wsCcRfWapiRadioPreauthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether WAPI pre-authentication is enabled on the radio." ::= { wsCcRfWapiRadioEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.10 wsCcRfWapiRadioUnicastKeysSupported OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the unicast keys the radio supports." ::= { wsCcRfWapiRadioEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.11 wsCcRfWapiRadioUnicastCipherEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the radio has unicast cipher enabled." ::= { wsCcRfWapiRadioEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.12 wsCcRfWapiRadioUnicastCipherSize OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The length in bit of the unicast cipher key." ::= { wsCcRfWapiRadioEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.13 wsCcRfWapiRadioUnicastCipherRequested OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last unicast cipher suite requested." ::= { wsCcRfWapiRadioEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.14 wsCcRfWapiRadioUnicastCipherSelected OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last unicast cipher suite negotiated." ::= { wsCcRfWapiRadioEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.15 wsCcRfWapiRadioMulticastCipher OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast cipher suite the radio must adopt." ::= { wsCcRfWapiRadioEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.16 wsCcRfWapiRadioMulticastCipherSize OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The length in bit of the multicast cipher key." ::= { wsCcRfWapiRadioEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.17 wsCcRfWapiRadioGroupCipherRequested OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last multicast cipher suite requested." ::= { wsCcRfWapiRadioEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.18 wsCcRfWapiRadioMulticastCipherSelected OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last multicast cipher suite negotiated." ::= { wsCcRfWapiRadioEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.19 wsCcRfWapiRadioBKIDUsed OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last BKID used in the last Unicast Key Negotiation Handshake." ::= { wsCcRfWapiRadioEntry 19 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.20 wsCcRfWapiRadioAuthSuite OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of an AKM suite." ::= { wsCcRfWapiRadioEntry 20 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.21 wsCcRfWapiRadioAuthSuiteEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the AKM suite is enabled/disabled." ::= { wsCcRfWapiRadioEntry 21 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.22 wsCcRfWapiRadioAuthSuiteRequested OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last AKM suite requested." ::= { wsCcRfWapiRadioEntry 22 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.23 wsCcRfWapiRadioAuthSuiteSelected OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The selector of the last AKM suite negotiated." ::= { wsCcRfWapiRadioEntry 23 } -- 1.3.6.1.4.1.388.14.3.2.1.32.1.1.1.24 wsCcRfWapiRadioAuthServerType OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the authentication server." ::= { wsCcRfWapiRadioEntry 24 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2 wsCcRfWapiWlan OBJECT IDENTIFIER ::= { wsCcRfWapi 2 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1 wsCcRfWapiWlanTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWapiWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains WAPI configuration for Wireless LANs. A row in this table is an extension of a row in wsCcRfWlanTable with the relationship being one-to-one." ::= { wsCcRfWapiWlan 1 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1 wsCcRfWapiWlanEntry OBJECT-TYPE SYNTAX WsCcRfWapiWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." AUGMENTS { wsCcRfWlanEntry } ::= { wsCcRfWapiWlanTable 1 } WsCcRfWapiWlanEntry ::= SEQUENCE { wsCcRfWapiWlanAuthEnable TruthValue, wsCcRfWapiWlanAuthServerIp IpAddress, wsCcRfWapiWlanPSKValue Password, wsCcRfWapiWlanPSKPassPhrase Password, wsCcRfWapiWlanSATimeout Unsigned32, wsCcRfWapiWlanUnicastCipher OCTET STRING, wsCcRfWapiWlanCertificateUpdateCount Unsigned32, wsCcRfWapiWlanMulticastUpdateCount Unsigned32, wsCcRfWapiWlanUnicastUpdateCount Unsigned32, wsCcRfWapiWlanUnicastRekeyMethod INTEGER, wsCcRfWapiWlanUnicastRekeyTime Unsigned32, wsCcRfWapiWlanUnicastRekeyPackets Unsigned32, wsCcRfWapiWlanMulticastRekeyMethod INTEGER, wsCcRfWapiWlanMulticastRekeyTime Unsigned32, wsCcRfWapiWlanMulticastRekeyPackets Unsigned32, wsCcRfWapiWlanMulticastRekeyStrict TruthValue, wsCcRfWapiWlanBKLifetime Unsigned32, wsCcRfWapiWlanBKReauthThreshold Unsigned32 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.1 wsCcRfWapiWlanAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable WAPI authentication." DEFVAL { false } ::= { wsCcRfWapiWlanEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.2 wsCcRfWapiWlanAuthServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the authentication server." ::= { wsCcRfWapiWlanEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.3 wsCcRfWapiWlanPSKValue OBJECT-TYPE SYNTAX Password (SIZE (32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The PSK for when WAPI in PSK mode is the selected AKM suite. This object is logically write-only. Reading this variable shall return zero-length string." ::= { wsCcRfWapiWlanEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.4 wsCcRfWapiWlanPSKPassPhrase OBJECT-TYPE SYNTAX Password MAX-ACCESS read-write STATUS current DESCRIPTION "The pass-phrase to derive the PSK when WAPI in PSK mode is the selected AKM suite. This object is logically write-only. Reading this variable shall return zero-length string." ::= { wsCcRfWapiWlanEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.5 wsCcRfWapiWlanSATimeout OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum time a security association shall take to set up." ::= { wsCcRfWapiWlanEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.6 wsCcRfWapiWlanUnicastCipher OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The selector of a supported unicast cipher suite." ::= { wsCcRfWapiWlanEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.7 wsCcRfWapiWlanCertificateUpdateCount OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times messages in the WAPI Certificate Authentication Handshake protocol will be retried per Certificate Authentication Handshake attempt." DEFVAL { 3 } ::= { wsCcRfWapiWlanEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.8 wsCcRfWapiWlanMulticastUpdateCount OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Message 1 in the WAPI Multicast Key Announcement Handshake will be retried per MSK Handshake attempt." ::= { wsCcRfWapiWlanEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.9 wsCcRfWapiWlanUnicastUpdateCount OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times Message 1 and Message 3 in the WAPI Unicast Key Negotiation Handshake will be retried per USK Handshake attempt." DEFVAL { 3 } ::= { wsCcRfWapiWlanEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.10 wsCcRfWapiWlanUnicastRekeyMethod OBJECT-TYPE SYNTAX INTEGER { disabled(1), timeBased(2), packetBased(3), timepacketBased(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mechanism for rekeying the WAPI USK." DEFVAL { timeBased } ::= { wsCcRfWapiWlanEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.11 wsCcRfWapiWlanUnicastRekeyTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the WAPI USK shall be refreshed. 1..4294967295 : Refresh time 0 : WAPI USK rekeying is disabled" DEFVAL { 86400 } ::= { wsCcRfWapiWlanEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.12 wsCcRfWapiWlanUnicastRekeyPackets OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4294967295) UNITS "1000 packets" MAX-ACCESS read-write STATUS current DESCRIPTION "A packet count (in 1000s of packets) after which the WAPI USK shall be refreshed. 1..4294967295 : Packet count 0 : WAPI USK rekeying is disabled" DEFVAL { 1000 } ::= { wsCcRfWapiWlanEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.13 wsCcRfWapiWlanMulticastRekeyMethod OBJECT-TYPE SYNTAX INTEGER { disabled(1), timeBased(2), packetBased(3), timepacketBased(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mechanism for rekeying the WAPI MSK." DEFVAL { timeBased } ::= { wsCcRfWapiWlanEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.14 wsCcRfWapiWlanMulticastRekeyTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds after which the WAPI MSK shall be refreshed. 1..4294967295 : Refresh time 0 : WAPI MSK rekeying is disabled" DEFVAL { 86400 } ::= { wsCcRfWapiWlanEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.15 wsCcRfWapiWlanMulticastRekeyPackets OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4294967295) UNITS "1000 packets" MAX-ACCESS read-write STATUS current DESCRIPTION "A packet count (in 1000s of packets) after which the WAPI MSK shall be refreshed. 1..4294967295 : Packet count 0 : WAPI MSK rekeying is disabled" DEFVAL { 1000 } ::= { wsCcRfWapiWlanEntry 15 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.16 wsCcRfWapiWlanMulticastRekeyStrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Refresh MSK whenever an MU leaves the BSS that possesses the MSK." DEFVAL { false } ::= { wsCcRfWapiWlanEntry 16 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.17 wsCcRfWapiWlanBKLifetime OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum lifetime of a BK in the BK cache." DEFVAL { 43200 } ::= { wsCcRfWapiWlanEntry 17 } -- 1.3.6.1.4.1.388.14.3.2.1.32.2.1.1.18 wsCcRfWapiWlanBKReauthThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..100) UNITS "percentage" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of the BK lifetime that should expire before a WAI re-authentication occurs." DEFVAL { 70 } ::= { wsCcRfWapiWlanEntry 18 } -- 1.3.6.1.4.1.388.14.3.2.1.32.3 wsCcRfWapiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable WAPI authentication in the switch." ::= { wsCcRfWapi 3 } -- 1.3.6.1.4.1.388.14.3.2.1.32.4 wsCcRfWapiCertificateInstalled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether certificate is installed in the switch." ::= { wsCcRfWapi 4 } -- 1.3.6.1.4.1.388.14.3.2.1.33 wsCcRfIpFilter OBJECT IDENTIFIER ::= { wsCcRfMIB 33 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1 wsCcRfIpFilterListTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIpFilterListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfIpFilter 1 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1 wsCcRfIpFilterListEntry OBJECT-TYPE SYNTAX WsCcRfIpFilterListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfIpFilterListName, wsCcRfIpFilterListRuleIndex } ::= { wsCcRfIpFilterListTable 1 } WsCcRfIpFilterListEntry ::= SEQUENCE { wsCcRfIpFilterListName DisplayString, wsCcRfIpFilterListRuleIndex Integer32, wsCcRfIpFilterListDecision INTEGER, wsCcRfIpFilterListProtocol Integer32, wsCcRfIpFilterListIpaddrSrcLower IpAddress, wsCcRfIpFilterListIpaddrSrcUpper IpAddress, wsCcRfIpFilterListIpaddrDestLower IpAddress, wsCcRfIpFilterListIpaddrDestUpper IpAddress, wsCcRfIpFilterListPortDestLower Integer32, wsCcRfIpFilterListPortDestUpper Integer32, wsCcRfIpFilterListRowStatus RowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.1 wsCcRfIpFilterListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Ip filter list name" ::= { wsCcRfIpFilterListEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.2 wsCcRfIpFilterListRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Rule number" ::= { wsCcRfIpFilterListEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.3 wsCcRfIpFilterListDecision OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "decision to permit or deny traffic from rule" ::= { wsCcRfIpFilterListEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.4 wsCcRfIpFilterListProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "protocol" ::= { wsCcRfIpFilterListEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.5 wsCcRfIpFilterListIpaddrSrcLower OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "lower limit of range of source ip addresses" ::= { wsCcRfIpFilterListEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.6 wsCcRfIpFilterListIpaddrSrcUpper OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "upper limit of range of source ip addresses" ::= { wsCcRfIpFilterListEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.7 wsCcRfIpFilterListIpaddrDestLower OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "lower limit of range of destination ip addresses" ::= { wsCcRfIpFilterListEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.8 wsCcRfIpFilterListIpaddrDestUpper OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "upper limit of range of destination ip addresses" ::= { wsCcRfIpFilterListEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.9 wsCcRfIpFilterListPortDestLower OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "lower limit of destination port range" ::= { wsCcRfIpFilterListEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.10 wsCcRfIpFilterListPortDestUpper OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "upper limit of destination port range" ::= { wsCcRfIpFilterListEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.33.1.1.11 wsCcRfIpFilterListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "row status" ::= { wsCcRfIpFilterListEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.33.2 wsCcRfIpFilterApRulesListTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIpFilterApRulesListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfIpFilter 2 } -- 1.3.6.1.4.1.388.14.3.2.1.33.2.1 wsCcRfIpFilterApRulesListEntry OBJECT-TYPE SYNTAX WsCcRfIpFilterApRulesListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfIpFilterApRulesListApMac } ::= { wsCcRfIpFilterApRulesListTable 1 } WsCcRfIpFilterApRulesListEntry ::= SEQUENCE { wsCcRfIpFilterApRulesListApMac PhysAddress, wsCcRfIpFilterApRulesListName DisplayString, wsCcRfIpFilterApRulesListRowStatus RowStatus } -- 1.3.6.1.4.1.388.14.3.2.1.33.2.1.1 wsCcRfIpFilterApRulesListApMac OBJECT-TYPE SYNTAX PhysAddress (SIZE (6)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "AP mac address" ::= { wsCcRfIpFilterApRulesListEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.33.2.1.2 wsCcRfIpFilterApRulesListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Ip filter rules list name." ::= { wsCcRfIpFilterApRulesListEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.33.2.1.3 wsCcRfIpFilterApRulesListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status." ::= { wsCcRfIpFilterApRulesListEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.33.3 wsCcRfIpFilterWlanRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfIpFilterWlanRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { wsCcRfIpFilter 3 } -- 1.3.6.1.4.1.388.14.3.2.1.33.3.1 wsCcRfIpFilterWlanRulesEntry OBJECT-TYPE SYNTAX WsCcRfIpFilterWlanRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfWlanIndex, wsCcRfIpFilterWlanRulesDirection } ::= { wsCcRfIpFilterWlanRulesTable 1 } WsCcRfIpFilterWlanRulesEntry ::= SEQUENCE { wsCcRfIpFilterWlanRulesDirection INTEGER, wsCcRfIpFilterWlanRulesNumbers DisplayString } -- Direction rule applied to. -- 1.3.6.1.4.1.388.14.3.2.1.33.3.1.1 wsCcRfIpFilterWlanRulesDirection OBJECT-TYPE SYNTAX INTEGER { in(1), out(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Direction " ::= { wsCcRfIpFilterWlanRulesEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.33.3.1.2 wsCcRfIpFilterWlanRulesNumbers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Rule numbers applied in order, separated by commas." ::= { wsCcRfIpFilterWlanRulesEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.34 wsCcRfMuBlacklist OBJECT IDENTIFIER ::= { wsCcRfMIB 34 } -- 1.3.6.1.4.1.388.14.3.2.1.34.1 wsCcRfMuBlacklistTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfMuBlacklistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing mus denied access due to user or violation." ::= { wsCcRfMuBlacklist 1 } -- 1.3.6.1.4.1.388.14.3.2.1.34.1.1 wsCcRfMuBlacklistEntry OBJECT-TYPE SYNTAX WsCcRfMuBlacklistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfMuBlacklistIndex } ::= { wsCcRfMuBlacklistTable 1 } WsCcRfMuBlacklistEntry ::= SEQUENCE { wsCcRfMuBlacklistIndex INTEGER, wsCcRfMuBlacklistStartingMac PhysAddress, wsCcRfMuBlacklistEndingMac PhysAddress, wsCcRfMuBlacklistReason DisplayString, wsCcRfMuBlacklistRemainingTime TimeTicks } -- 1.3.6.1.4.1.388.14.3.2.1.34.1.1.1 wsCcRfMuBlacklistIndex OBJECT-TYPE SYNTAX INTEGER (1..1100) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index: 1 - 1000 user-defined, 1001 - 1100 violation-induced" ::= { wsCcRfMuBlacklistEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.34.1.1.2 wsCcRfMuBlacklistStartingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Starting MAC address in a range or addresses." ::= { wsCcRfMuBlacklistEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.34.1.1.3 wsCcRfMuBlacklistEndingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ending MAC address in a range or addresses." ::= { wsCcRfMuBlacklistEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.34.1.1.4 wsCcRfMuBlacklistReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Reason mu within range of mac addresses is blacklisted. Possible values are user-configured or violation type." ::= { wsCcRfMuBlacklistEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.34.1.1.5 wsCcRfMuBlacklistRemainingTime OBJECT-TYPE SYNTAX TimeTicks UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time mus are blacklisted (0 - forever)" ::= { wsCcRfMuBlacklistEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.35 wsCcRfWiredHotspot OBJECT IDENTIFIER ::= { wsCcRfMIB 35 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1 wsCcRfWiredHotspotTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWiredHotspotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure wired hotspot related parameters." ::= { wsCcRfWiredHotspot 1 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1 wsCcRfWiredHotspotEntry OBJECT-TYPE SYNTAX WsCcRfWiredHotspotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfWiredHotspotVlanIndex } ::= { wsCcRfWiredHotspotTable 1 } WsCcRfWiredHotspotEntry ::= SEQUENCE { wsCcRfWiredHotspotVlanIndex INTEGER, wsCcRfWiredHotspotServerPrimaryIp IpAddress, wsCcRfWiredHotspotServerPrimaryPort Integer32, wsCcRfWiredHotspotServerPrimarySecret Password, wsCcRfWiredHotspotServerSecondaryIp IpAddress, wsCcRfWiredHotspotServerSecondaryPort Integer32, wsCcRfWiredHotspotServerSecondarySecret Password, wsCcRfWiredHotspotServerRetries Integer32, wsCcRfWiredHotspotServerTimeout Integer32, wsCcRfWiredHotspotWebsiteType INTEGER, wsCcRfWiredHotspotLogoutOnClose TruthValue, wsCcRfWiredHotspotRedirectToHostName TruthValue, wsCcRfWiredHotspotSimultaneousUsers INTEGER, wsCcRfWiredHotspotAccountingOption INTEGER } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.1 wsCcRfWiredHotspotVlanIndex OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN Index." ::= { wsCcRfWiredHotspotEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.2 wsCcRfWiredHotspotServerPrimaryIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary Radius server ip for hotspot authentication." ::= { wsCcRfWiredHotspotEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.3 wsCcRfWiredHotspotServerPrimaryPort OBJECT-TYPE SYNTAX Integer32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary Radius server port for hotspot authentication." ::= { wsCcRfWiredHotspotEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.4 wsCcRfWiredHotspotServerPrimarySecret OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary Radius server shared secret for hotspot authentication." ::= { wsCcRfWiredHotspotEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.5 wsCcRfWiredHotspotServerSecondaryIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary Radius server ip for hotspot authentication." ::= { wsCcRfWiredHotspotEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.6 wsCcRfWiredHotspotServerSecondaryPort OBJECT-TYPE SYNTAX Integer32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary Radius server port for hotspot authentication." ::= { wsCcRfWiredHotspotEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.7 wsCcRfWiredHotspotServerSecondarySecret OBJECT-TYPE SYNTAX Password (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary Radius server shared secret for hotspot authentication." ::= { wsCcRfWiredHotspotEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.8 wsCcRfWiredHotspotServerRetries OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries the wireless switch initiates before giving up." ::= { wsCcRfWiredHotspotEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.9 wsCcRfWiredHotspotServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Time the wireless switch waits for a response from the radius server before retrying." ::= { wsCcRfWiredHotspotEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.10 wsCcRfWiredHotspotWebsiteType OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The website type to be used for authentication. The website can either be hosted on the wireless switch or on an external web server." ::= { wsCcRfWiredHotspotEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.11 wsCcRfWiredHotspotLogoutOnClose OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This property allows end user to enable/disable user logout on browser close event." ::= { wsCcRfWiredHotspotEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.12 wsCcRfWiredHotspotRedirectToHostName OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the use of hostname/System-Name in the redirection URL instead of the IP address of the switch." DEFVAL { false } ::= { wsCcRfWiredHotspotEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.13 wsCcRfWiredHotspotSimultaneousUsers OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of MAC addresses that are allowed to use same username at the same time in hotspot." DEFVAL { '0'b } ::= { wsCcRfWiredHotspotEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.35.1.1.14 wsCcRfWiredHotspotAccountingOption OBJECT-TYPE SYNTAX INTEGER { none(1), radius(2), syslog(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Accounting options for this VLAN." DEFVAL { none } ::= { wsCcRfWiredHotspotEntry 14 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2 wsCcRfWiredHotspotPageTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWiredHotspotPageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure hotspot page parameters." ::= { wsCcRfWiredHotspot 2 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1 wsCcRfWiredHotspotPageEntry OBJECT-TYPE SYNTAX WsCcRfWiredHotspotPageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfWiredHotspotVlanIndex, wsCcRfWiredHotspotPageType } ::= { wsCcRfWiredHotspotPageTable 1 } WsCcRfWiredHotspotPageEntry ::= SEQUENCE { wsCcRfWiredHotspotPageType INTEGER, wsCcRfWiredHotspotPageIntPageTitle OCTET STRING, wsCcRfWiredHotspotPageIntPageHeader OCTET STRING, wsCcRfWiredHotspotPageIntPageDescr OCTET STRING, wsCcRfWiredHotspotPageIntPageFooter OCTET STRING, wsCcRfWiredHotspotPageIntPageImgUrl1 OCTET STRING, wsCcRfWiredHotspotPageIntPageImgUrl2 OCTET STRING, wsCcRfWiredHotspotPageExtPageUrl OCTET STRING, wsCcRfWiredHotspotPageSetDefault TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.1 wsCcRfWiredHotspotPageType OBJECT-TYPE SYNTAX INTEGER { login(1), welcome(2), fail(3), terms(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Hotspot page type." ::= { wsCcRfWiredHotspotPageEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.2 wsCcRfWiredHotspotPageIntPageTitle OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that will be in the title of the webpage." ::= { wsCcRfWiredHotspotPageEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.3 wsCcRfWiredHotspotPageIntPageHeader OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that is displayed as a header. (large font, top section) of the webpage." ::= { wsCcRfWiredHotspotPageEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.4 wsCcRfWiredHotspotPageIntPageDescr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that is displayed as the main body (normal font, middle of page) of the webpage." ::= { wsCcRfWiredHotspotPageEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.5 wsCcRfWiredHotspotPageIntPageFooter OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ascii string that is displayed at the footer (smaller font, bottom section) of the webpage." ::= { wsCcRfWiredHotspotPageEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.6 wsCcRfWiredHotspotPageIntPageImgUrl1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "main image( large size) that will be served up by the local webpage. Appears between the header and description on the webpage." ::= { wsCcRfWiredHotspotPageEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.7 wsCcRfWiredHotspotPageIntPageImgUrl2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Small image (thumbnail size) that will be served up by the local webpage. Appears near the footer on the webpage." ::= { wsCcRfWiredHotspotPageEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.8 wsCcRfWiredHotspotPageExtPageUrl OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Url of external page." ::= { wsCcRfWiredHotspotPageEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.35.2.1.9 wsCcRfWiredHotspotPageSetDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set terms and conditions page information to default for this VLAN. Can set only true(1) and reset to false(2) once the page is set to default." DEFVAL { false } ::= { wsCcRfWiredHotspotPageEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.35.3 wsCcRfWiredHotspotWhiteIpTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWiredHotspotWhiteIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure hotspot white list parameters. Users who have not yet authenticated will be allowed access to these IP addresses." ::= { wsCcRfWiredHotspot 3 } -- 1.3.6.1.4.1.388.14.3.2.1.35.3.1 wsCcRfWiredHotspotWhiteIpEntry OBJECT-TYPE SYNTAX WsCcRfWiredHotspotWhiteIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfWiredHotspotVlanIndex, wsCcRfWiredHotspotWhiteIpRuleIndex } ::= { wsCcRfWiredHotspotWhiteIpTable 1 } WsCcRfWiredHotspotWhiteIpEntry ::= SEQUENCE { wsCcRfWiredHotspotWhiteIpRuleIndex Integer32, wsCcRfWiredHotspotWhiteIpAddr IpAddress } -- 1.3.6.1.4.1.388.14.3.2.1.35.3.1.1 wsCcRfWiredHotspotWhiteIpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Rule Index." ::= { wsCcRfWiredHotspotWhiteIpEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.35.3.1.2 wsCcRfWiredHotspotWhiteIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "White-list IP address." ::= { wsCcRfWiredHotspotWhiteIpEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4 wsCcRfWiredHotspotVlanAuthEapTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWiredHotspotVlanAuthEapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of EAP authentication settings for each VLAN." ::= { wsCcRfWiredHotspot 4 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1 wsCcRfWiredHotspotVlanAuthEapEntry OBJECT-TYPE SYNTAX WsCcRfWiredHotspotVlanAuthEapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { wsCcRfWiredHotspotVlanIndex } ::= { wsCcRfWiredHotspotVlanAuthEapTable 1 } WsCcRfWiredHotspotVlanAuthEapEntry ::= SEQUENCE { wsCcRfWiredHotspotVlanAuthEapAuthProtocol INTEGER, wsCcRfWiredHotspotVlanAuthEapDscpTos INTEGER, wsCcRfWiredHotspotVlanAuthEapAccountingMode INTEGER, wsCcRfWiredHotspotVlanAuthEapInterimAcctInterval Unsigned32, wsCcRfWiredHotspotVlanAuthEapAcctTimeout Unsigned32, wsCcRfWiredHotspotVlanAuthEapAcctRetries Unsigned32, wsCcRfWiredHotspotVlanAuthEapPrimaryServer IpAddress, wsCcRfWiredHotspotVlanAuthEapSecondaryServer IpAddress, wsCcRfWiredHotspotVlanAuthEapPrimarySrvrPort Unsigned32, wsCcRfWiredHotspotVlanAuthEapSecondarySrvrPort Unsigned32, wsCcRfWiredHotspotVlanAuthEapPrimarySecret Password, wsCcRfWiredHotspotVlanAuthEapSecondarySecret Password, wsCcRfWiredHotspotVlanAuthEapRadiusDynamicAuthEnable TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.1 wsCcRfWiredHotspotVlanAuthEapAuthProtocol OBJECT-TYPE SYNTAX INTEGER { paap(1), chap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication protocol to be used, PAP or CHAP." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.2 wsCcRfWiredHotspotVlanAuthEapDscpTos OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "DSCP or TOS value to be used (between 0 and 63)." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 2 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.3 wsCcRfWiredHotspotVlanAuthEapAccountingMode OBJECT-TYPE SYNTAX INTEGER { startStop(1), stopOnly(2), startInterimStop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if mode of accounting is one of: Start-Stop, Start-only or Start-interim-Stop." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 3 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.4 wsCcRfWiredHotspotVlanAuthEapInterimAcctInterval OBJECT-TYPE SYNTAX Unsigned32 (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval for interim accounting." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 4 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.5 wsCcRfWiredHotspotVlanAuthEapAcctTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout value for accounting option." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 5 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.6 wsCcRfWiredHotspotVlanAuthEapAcctRetries OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of accounting retries." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 6 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.7 wsCcRfWiredHotspotVlanAuthEapPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the Primary Accounting Server." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 7 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.8 wsCcRfWiredHotspotVlanAuthEapSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the Secondary Accounting Server." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 8 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.9 wsCcRfWiredHotspotVlanAuthEapPrimarySrvrPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Number of the Primary Server." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 9 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.10 wsCcRfWiredHotspotVlanAuthEapSecondarySrvrPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port Number of the Secondary Server." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 10 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.11 wsCcRfWiredHotspotVlanAuthEapPrimarySecret OBJECT-TYPE SYNTAX Password (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the Primary Accounting server." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 11 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.12 wsCcRfWiredHotspotVlanAuthEapSecondarySecret OBJECT-TYPE SYNTAX Password (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shared secret of the Secondary Accounting server." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 12 } -- 1.3.6.1.4.1.388.14.3.2.1.35.4.1.13 wsCcRfWiredHotspotVlanAuthEapRadiusDynamicAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable support for Radius Dynamic Authorization extensions such as Disconnect Message, and Change-Of-Authorization as described in RFC 3576." ::= { wsCcRfWiredHotspotVlanAuthEapEntry 13 } -- 1.3.6.1.4.1.388.14.3.2.1.35.5 wsCcRfWiredHotspotStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF WsCcRfWiredHotspotStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table provides the status of the VLAN enabled or not." ::= { wsCcRfWiredHotspot 5 } -- 1.3.6.1.4.1.388.14.3.2.1.35.5.1 wsCcRfWiredHotspotStatusEntry OBJECT-TYPE SYNTAX WsCcRfWiredHotspotStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table provides the status of the VLAN enabled or not." INDEX { wsCcRfWiredHotspotVlanIndex } ::= { wsCcRfWiredHotspotStatusTable 1 } WsCcRfWiredHotspotStatusEntry ::= SEQUENCE { wsCcRfWiredHotspotMode TruthValue } -- 1.3.6.1.4.1.388.14.3.2.1.35.5.1.1 wsCcRfWiredHotspotMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If the value is set to true then wired hotsport is enabled on this VLAN." DEFVAL { false } ::= { wsCcRfWiredHotspotStatusEntry 1 } -- 1.3.6.1.4.1.388.14.3.2.1.36 wsCcRfProxyArpEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), strictEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Proxy ARP status enable or disable." ::= { wsCcRfMIB 36 } -- 1.3.6.1.4.1.388.14.3.2.1.100 wsCcRfConformance OBJECT IDENTIFIER ::= { wsCcRfMIB 100 } -- 1.3.6.1.4.1.388.14.3.2.1.100.1 wsCcRfCompliances OBJECT IDENTIFIER ::= { wsCcRfConformance 1 } -- 1.3.6.1.4.1.388.14.3.2.1.100.1.1 wsCcRfCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION " " MODULE -- this module MANDATORY-GROUPS { wsCcRfGroup } ::= { wsCcRfCompliances 1 } -- 1.3.6.1.4.1.388.14.3.2.1.100.2 wsCcRfGroups OBJECT IDENTIFIER ::= { wsCcRfConformance 2 } -- 1.3.6.1.4.1.388.14.3.2.1.100.2.1 wsCcRfGroup OBJECT-GROUP OBJECTS { wsCcRfApRadio1, wsCcRfApRadio2, wsCcRfRadioDefaultWmmAccessCategory, wsCcRfRadioDefaultWmmAifsn, wsCcRfRadioDefaultWmmTxOp, wsCcRfRadioDefaultWmmCwMin, wsCcRfRadioDefaultWmmCwMax, wsCcRfWlanNumRadiosAdopted, wsCcRfOversizedFrameEnable, wsCcRfMuIsWmm, wsCcRfWlanDescr, wsCcRfSelfHealingNeighborRecoveryEnable, wsCcRfSelfHealingInterferenceAvoidanceEnable, wsCcRfSelfHealingInterferenceAvoidanceRetriesx10, wsCcRfSelfHealingInterferenceAvoidanceHoldTime, wsCcRfRadioDefaultSelfHealingAction, wsCcRfHotspotPageType, wsCcRfHotspotIntPageTitle, wsCcRfHotspotIntPageHeader, wsCcRfHotspotIntPageDescr, wsCcRfHotspotIntPageFooter, wsCcRfHotspotIntPageImgUrl1, wsCcRfHotspotIntPageImgUrl2, wsCcRfHotspotExtPageUrl, wsCcRf802dt1xRadioAuthLogin, wsCcRf802dt1xRadioAuthPass, wsCcRf802dt1xRadioAuthSetRadio, wsCcRfRadioStatusVlanTag, wsCcRfWlanEncP2WPassphrase, wsCcRfWlanEncP2WKey1, wsCcRfWlanEncP2WKey2, wsCcRfWlanEncP2WKey3, wsCcRfWlanEncP2WKey4, wsCcRfWlanMuIdleTime, wsCcRfRadioRunAcsNow, wsCcRfRadioResetParentAp, wsCcRfRadioReset, wsCcRfRadioDefaultIndex, wsCcRfRadioDefaultType, wsCcRfRadioDefaultApType, wsCcRfRadioDefaultBssWlanMap, wsCcRfRadioDefaultAntDiversity, wsCcRfRadioDefaultShortPreamble, wsCcRfRadioDefaultRtsThresh, wsCcRfRadioDefaultBeaconInt, wsCcRfRadioDefaultDtimPrd, wsCcRfRadioDefaultBasicRates, wsCcRfRadioDefaultSupportedRates, wsCcRfRadioDefaultRapDetector, wsCcRfRadioDefaultClusterIndex, wsCcRfRadioDefaultMaxMu, wsCcRfWlanEncP2WClearKeys, wsCcRfCountryCode, wsCcRfSnmpSetDelay, wsCcRfClusterIndex, wsCcRfProxyRespMuArpReq, wsCcRfLastError, wsCcRfApIndex, wsCcRfApNicMac, wsCcRfApModelNumber, wsCcRfApSerialNumber, wsCcRfApPcbRevision, wsCcRfApBootLoaderRev, wsCcRfApWispVersion, wsCcRfApRuntimeFwVersion, wsCcRfApNumRadios, wsCcRfApImageVersionIndex, wsCcRfApImageVersionApType, wsCcRfApImageVersionName, wsCcRfApUnadoptedIndex, wsCcRfApUnadoptedMac, wsCcRfApUnadoptedLastSeen, wsCcRfRadioAutoAdopt, wsCcRfRadioCnt, wsCcRfRadioIndex, wsCcRfRadioApMac, wsCcRfRadioDescr, wsCcRfRadioType, wsCcRfRadioApType, wsCcRfRadioBssWlanMap, wsCcRfRadioAntDiversity, wsCcRfRadioShortPreamble, wsCcRfRadioRtsThresh, wsCcRfRadioBeaconInt, wsCcRfRadioDtimPrd, wsCcRfRadioBasicRates, wsCcRfRadioSupportedRates, wsCcRfRadioRapDetector, wsCcRfRadioClusterIndex, wsCcRfRadioMaxMu, wsCcRfRadioRowStatus, wsCcRfRadioCpPlacement, wsCcRfRadioCpPosChannel, wsCcRfRadioCpDesChannel, wsCcRfRadioCpPosPowerDb, wsCcRfRadioCpDesPowerDb, wsCcRfRadioCpDesPowerMw, wsCcRfRadioCpSet, wsCcRfRadioCpReset, wsCcRfRadioStatusState, wsCcRfRadioStatusPtrToAp, wsCcRfRadioStatusMaxWlans, wsCcRfRadioStatusMaxBss, wsCcRfRadioStatusCurrChannel, wsCcRfRadioStatusCurrPowerDb, wsCcRfRadioStatusCurrPowerMw, wsCcRfRadioStatusAssociatedMus, wsCcRfRadioStatusLastAdoption, wsCcRfRadioStatusShortSlotTime, wsCcRfMuMac, wsCcRfMuWlanIndex, wsCcRfMuRadioIndex, wsCcRfMuVlanIndex, wsCcRfMuKeyIndex, wsCcRfMuIpAddr, wsCcRfMuBSS, wsCcRfMuAuthMethod, wsCcRfMuEncMethod, wsCcRfMuRadioType, wsCcRfMuPowerMode, wsCcRfMuSupportedRates, wsCcRfMuVoice, wsCcRfMuIsDataReady, wsCcRfMuRogueApEna, wsCcRfMuDisassociateNow, wsCcRfWlanIndex, wsCcRfWlanEnable, wsCcRfWlanEssid, wsCcRfWlanSecBeacon, wsCcRfWlanVoicePrioritization, wsCcRfWlanAnswerBroadcastEss, wsCcRfWlanMulticastAddr1, wsCcRfWlanMulticastAddr2, wsCcRfWlanAuthentication, wsCcRfWlanEncryptionMap, wsCcRfWlanBcastEnc, wsCcRfWlanUseDscp, wsCcRfWlanAuthEapRadiusServerIp1, wsCcRfWlanAuthEapRadiusServerPort1, wsCcRfWlanAuthEapRadiusServerSecret1, wsCcRfWlanAuthEapRadiusServerIp2, wsCcRfWlanAuthEapRadiusServerPort2, wsCcRfWlanAuthEapRadiusServerSecret2, wsCcRfWlanAuthEapSuppRetries, wsCcRfWlanAuthEapSuppTimeout, wsCcRfWlanAuthEapServerRetries, wsCcRfWlanAuthEapServerTimeout, wsCcRfWlanAuthEapReauth, wsCcRfWlanAuthEapReauthTimeout, wsCcRfwlanAuthKerbRealm, wsCcRfWlanAuthKerbPassword, wsCcRfWlanAuthKerbKdcServerIp1, wsCcRfWlanAuthKerbKdcServerPort1, wsCcRfWlanAuthKerbKdcServerIp2, wsCcRfWlanAuthKerbKdcServerPort2, wsCcRfWlanEncSkEnable, wsCcRfWlanEncWep64KeyIndex, wsCcRfWlanEncWep64Key1, wsCcRfWlanEncWep64Key2, wsCcRfWlanEncWep64Key3, wsCcRfWlanEncWep64Key4, wsCcRfWlanEncWep128KgKeyIndex, wsCcRfWlanEncWep128KgKey1, wsCcRfWlanEncWep128KgKey2, wsCcRfWlanEncWep128KgKey3, wsCcRfWlanEncWep128KgKey4, wsCcRfWlanEncTkipCcmpKeyType, wsCcRfWlanEncTkipCcmpPassphrase, wsCcRfWlanEncTkipCcmpKey, wsCcRfWlanEncTkipCcmpKeyRotation, wsCcRfWlanEncTkipCcmpKeyInterval, wsCcRfWlanEncTkipCcmpPmkCaching, wsCcRfWlanEncTkipCcmpOppPmkCaching, wsCcRfMuAssocAclIndex, wsCcRfMuAssocAclMode, wsCcRfMuAssocAclStartingMac, wsCcRfMuAssocAclEndingMac, wsCcRfMuAssocAclWlans, wsCcRfRapMode, wsCcRfRapCfgIndex, wsCcRfRapCfgAnyMac, wsCcRfRapCfgMac, wsCcRfRapCfgAnySsid, wsCcRfRapCfgSsid, wsCcRfRapCfgRowStatus, wsCcRfRapStatusMac, wsCcRfRapStatusHeardAp, wsCcRfRapStatusChannel, wsCcRfRapStatusType, wsCcRfRapStatusSsid, wsCcRfRapStatusLastTimeSeen, wsCcRfRapStatusLastSignal, wsCcRfRapStatusMinSignal, wsCcRfRapStatusMaxSignal, wsCcRfRapStatusSumSignal, wsCcRfRapStatusSignalCount, wsCcRfMuAssocAclRowStatus, wsCcRfRadioDefaultCpPlacement, wsCcRfRadioDefaultCpPosChannel, wsCcRfRadioDefaultCpDesChannel, wsCcRfRadioDefaultCpPosPowerDb, wsCcRfRadioDefaultCpDesPowerDb, wsCcRfRadioDefaultCpDesPowerMw, wsCcRfRadioDefaultCpSet, wsCcRfRadioDefaultCpReset, wsCcRfHotspotServerRetries, wsCcRfHotspotServerTimeout, wsCcRfWlanPriorityEnable, wsCcRfApImageVersionModel, wsCcRfRadioCpChannelMode, wsCcRfRadioDefaultCpChannelMode, wsCcRfApCount, wsCcRfRadioStatusRadioMac, wsCcRfMuRoamCount, wsCcRfAdvancedConfigEnable, wsCcRfMuLastHeard, wsCcRfRadioSelfHealingPwrOffset, wsCcRfWlanSvpEnable, wsCcRfMuCnt, wsCcRfApImageVersionReleaseDate, wsCcRfApImageVersionImageSize, wsCcRfApUnadoptedApType, wsCcRfRadioLastMac, wsCcRfRadioLastReason, wsCcRfRadioSelfHealingAction, wsCcRfMuLastMac, wsCcRfSelfHealingDetectNeighborNow, wsCcRfHotspotServerIp1, wsCcRfHotspotServerPort1, wsCcRfHotspotServerSecret1, wsCcRfHotspotServerIp2, wsCcRfHotspotServerPort2, wsCcRfHotspotServerSecret2, wsCcRfHotspotWhiteIpRuleIndex, wsCcRfWlanAuthKerberosServerTimeout, wsCcRfWlanMobilityEnable, wsCcRfIdsStatusFilteredMuMac, wsCcRfHotspotWhiteIpAddr, wsCcRfRadioDefaultSelfHealingPwrOffset, wsCcRfWlanWmmEnable, wsCcRfHotspotWebsiteType, wsCcRfWlanMuToMu, wsCcRfIdsClearMuIdsEventEntries, wsCcRfIdsEventLastOccurredTime, wsCcRfIdsEventType, wsCcRfWlanQosPrioritization, wsCcRfQosAcTo802dot1pPriority, wsCcRfQosAcTo802dot1pAccessCategory, wsCcRfQos802dot1pToAcAccessCategory, wsCcRfQos802dot1pToAcPriority, wsCcRfQosDscpToAcAccessCategory, wsCcRfQosDscpToAcDscp, wsCcRfQosDscpToAcIndex, wsCcRfQos802dot1pToAcIndex, wsCcRfWlanAuthEapAuthProtocol, wsCcRfWlanAuthEapDscpTos, wsCcRfApAddress, wsCcRfIdsStatusViolatnIndex, wsCcRfIdsStatusViolatnType, wsCcRfIdsStatusRadioIndex, wsCcRfApHistoryIndex, wsCcRfApHistoryRadioType, wsCcRfApHistoryTimestamp, wsCcRfApHistoryEvent, wsCcRfApHistoryReason, wsCcRfRadioHealingModeCnt, wsCcRfRadioNormalModeCnt, wsCcRfMuProbeRequestsAgeHeardOut, wsCcRfApHistoryMac, wsCcRfWlanDynamicVlanAssignment, wsCcRfRadioRapSingleChannelScan, wsCcRfRadioDefaultRapSingleChannelScan, wsCcRfIdsThresholdsMu, wsCcRfIdsThresholdsRadio, wsCcRfIdsThresholdsSwitch, wsCcRfIdsThresholdsFilterAgeout, wsCcRfIdsStatusRemainingBlacklistTime, wsCcRfIdsEventRadioIndex, wsCcRfIdsStatusRowStatus, wsCcRfIdsEventTotalCount, wsCcRfIdsEventCountSinceMidnight, wsCcRfWlanEncTkipCcmpPreauthentication, wsCcRfIdsThresholdsViolTypeIndex, wsCcRfWlanAuthEapAccountingMode, wsCcRfWlanAuthEapInterimAcctInterval, wsCcRfWlanAuthEapAcctTimeout, wsCcRfWlanAuthEapAcctRetries, wsCcRfWlanAuthPrimaryServer, wsCcRfWlanAuthEapSecondaryServer, wsCcRfWlanAuthEapPrimarySrvrPort, wsCcRfWlanAuthEapSecondarySrvrPort, wsCcRfWlanAuthEapPrimarySecret, wsCcRfWlanAuthEapSecondarySecret, wsCcRfWlanSyslogServerPort, wsCcRfWlanSyslogServerIp, wsCcRfWlanAccountingType, wsCcRfApHistoryEnable, wsCcRfApHistoryClear, wsCcRfMuHistoryEnable, wsCcRfMuHistoryClear, wsCcRfMuProbeHistoryEnable, wsCcRfMuProbeHistoryClear, wsCcRfWlanAuthEapRadiusMacAuthFormat, wsCcRfIdsViolCountLastDetWindow, wsCcRfIdsViolationType, wsCcRfIdsRadioIndex, wsCcRfRadioConfiguredCnt, wsCcRfRapMuAssistMode, wsCcRfRUnpprovedApTimeout, wsCcRfRApprovedApTimeout, wsCcRfRapMuAssistRefreshPeriod, wsCcRfLldpName, wsCcRfLldpNameSet, wsCcRfLldpApMacAddr, wsCcRfWiredWebAuthWlan, wsCcRfWiredWebAuthVlan, wsCcRfWiredWebAuthEnable, wsCcRfRadioBssDtim, wsCcRfRapMuAssistIndex, wsCcRfRapMuAssistMac, wsCcRfRapMuAssistFoundOnPrtl, wsCcRfRapMuAssistTimestamp, wsCcRfRapMuAssistSsid, wsCcRfRapMuAssistBss, wsCcRfRapMuAssistRssi, wsCcRfWiredWebAuthHostEntryDelete, wsCcRfWiredWebAuthHostVlan, wsCcRfWiredWebAuthHostIp, wsCcRfWiredWebAuthHostState, wsCcRfWiredWebAuthHostIndex, wsCcRfWiredWebAuthHostMac, wsCcRfMuQosInfo, wsCcRfRadioCfgMethod, wsCcRfMuProbeConfigIndex, wsCcRfMuProbeConfigMac, wsCcRfMuProbeConfigStatus, wsCcRfMuHistoryStatusRadioIndex, wsCcRfMuHistoryStatusWlanIndex, wsCcRfMuHistoryStatusTimestamp, wsCcRfMuHistoryStatusEvent, wsCcRfMuHistoryStatusMac, wsCcRfMuHistoryStatusIndex, wsCcRfWlanCount, wsCcRfIdsDetectionWindow, wsCcRfMuTunnelIndex, wsCcRfMuProbeStatusIndex, wsCcRfMuProbeStatusMac, wsCcRfMuProbeStatusTimeticks, wsCcRfMuProbeStatusSignalStrength, wsCcRfMuProbeStatusHeardRadio, wsCcRfSelfHealingNeighborRadioIndices, wsCcRfWlanWmmVoParm, wsCcRfWlanWmmViParm, wsCcRfWlanWmmBkParm, wsCcRfWlanWmmBeParm, wsCcRfRadioWmmVoParm, wsCcRfRadioWmmViParm, wsCcRfMuLastAssoc, wsCcRfMuSessionTimeout, wsCcRfMuIdleTimeout, wsCcRfRadioDefaultBssDtim, wsCcRfWlanAuthEapNACServerIp1, wsCcRfWlanAuthEapNACServerSecret1, wsCcRfWlanAuthEapNACServerIp2, wsCcRfWlanAuthEapNACServerPort2, wsCcRfWlanAuthEapNACServerSecret2, wsCcRfWlanAuthEapNACServerRetries, wsCcRfWlanAuthEapNACServerTimeout, wsCcRfWlanClientIncludeListName, wsCcRfWlanClientIncludeListHostName, wsCcRfWlanClientIncludeListMAC, wsCcRfWlanClientIncludeListMACMask, wsCcRfWlanClientIncludeListRowStatus, wsCcRfWlanClientExcludeListName, wsCcRfWlanClientExcludeListHostName, wsCcRfWlanClientExcludeListMAC, wsCcRfWlanClientExcludeListMACMask, wsCcRfWlanClientExcludeListRowStatus, wsCcRfSensorRevertIndex, wsCcRfApConvertType, wsCcRfApConvertIndex, wsCcRfSensorRevertSensorIp, wsCcRfSensorRevertSensorVlan, wsCcRfSensorRevertSensorMac, wsCcRfSensorRevertSensorIndex, wsCcRfMuLocationingPreferredIndex, wsCcRfMuLocationingPreferredMuMac, wsCcRfMuLocationingIndex, wsCcRfMuLocationingMuMac, wsCcRfMuLocationingRadioMac, wsCcRfMuLocationingSignalStrength, wsCcRfMuLocationingHeardChannel, wsCcRfMuLocationingHeardTime, wsCcRfMuLocationingEnable, wsCcRfMuLocationingMaxMus, wsCcRfMuLocationingWindowTime, wsCcRfMuLocationingClear, wsCcRfRapLocationingIndex, wsCcRfRapLocationingAPMac, wsCcRfRapLocationingRadioMac, wsCcRfRapLocationingSignalStrength, wsCcRfRapLocationingHeardChannel, wsCcRfRapLocationingHeardTime, wsCcRfRapLocationingEnable, wsCcRfRapLocationingMaxRap, wsCcRfRapLocationingScanInterval, wsCcRfRapLocationingScanTime, wsCcRfRapLocationingChannelSetForRadioA, wsCcRfRapLocationingChannelSetForRadioBG, wsCcRfRapLocationingClear, wsCcRfRapLocationingNumRap, wsCcRfMuLocationingNumMu, wsCcRfRadioWmmBkParm, wsCcRfRadioWmmBeParm, wsCcRfWlanVlanLastError, wsCcRfWlanMaxVlans, wsCcRfWlanVlanRowStatus, wsCcRfWlanVlanUserLimit, wsCcRfWlanVlanIndex, wsCcRfWlanClientListName, wsCcRfRadioBridgeMaxClientBridges, wsCcRfRadioBridgeBaseBridgeEnable, wsCcRfRadioBridgeClientBridgeEnable, wsCcRfRadioMuLocationingEnable, wsCcRfRadioRogueApLocationingEnable, wsCcRfRadioDefaultMuLocationingEnable, wsCcRfRadioDefaultRogueApLocationingEnable, wsCcRfWlanClientListWlanBitmap, wsCcRfMuLocationingPreferredRowStatus, wsCcRfRadioBridgeLinkTimeout, wsCcRfRadioBridgeSsid, wsCcRfWlanBwAllocationEnable, wsCcRfWlanQosWeight, wsCcRfIdsBadEssidRowStatus, wsCcRfIdsBadEssid, wsCcRfIdsBadEssidIndex, wsCcRfRadioRssEnable, wsCcRfApExtApLocation, wsCcRfApExtNetMask, wsCcRfLastAlarmEvent, wsCcRfApExtTotalInterfaces, wsCcRfApExtApName, wsCcRfSwitchManufacturer, wsCcRfMuRateLimitingDown, wsCcRfMuRateLimitingUp, wsCcRfRadioGroupTableGrpId, wsCcRfRadioGroupId, wsCcRfWlanNacMode, wsCcRfApConvertAction, wsCcRfRadioGroupRadioId, wsCcRfWlanHoldTime, wsCcRfWlanIndependentModeEnable, wsCcRfWlanClientBridgeBackhaulEnable, wsCcRfApAapVersionString, wsCcRfWlanAuthEapAapProxyRadiusEnable, wsCcRfApExtApMac, wsCcRfHotspotMaxLoginAttempts, wsCcRfHotspotLogoutOnClose, wsCcRfMuLocation, wsCcRfMuGroup, wsCcRfMuRoleName, wsCcRfApAapImgUpdLastFailedReason, wsCcRfApAapImgUpdStart, wsCcRfApAapImgUpdMac, wsCcRfApAapImgEnableAutoUpd, wsCcRfApImgUploadLastFailedReason, wsCcRfApImgUploadRowStatus, wsCcRfApImgUploadFile, wsCcRfApImgUploadImgType, wsCcRfHotspotRedirectToHostName, wsCcRfHotspotSimultaneousUsers, wsCcRfRapContainmentEnable, wsCcRfRapContainmentInterval, wsCcRfRapContainmentIndex, wsCcRfRapContainmentRogueMac, wsCcRfRapContainmentRowStatus, wsCcRfSensorRevertAction, wsCcRfMuLoadBalancingMethod, wsCcRfSmartCalibrationLastFailedReason, wsCcRfSmartCalibrationStart, wsCcRfSmartCalibrationSchedIntvl, wsCcRfSmartCalibrationSchedStartTime, wsCcRfSmartFaultyRadioNumRescuers, wsCcRfSmartRescuerRowStatus, wsCcRfSmartRescuerAttenuation, wsCcRfSmartRescuerPowerBoost, wsCcRfSmartRescuerMac, wsCcRfSmartEnableScheduledCalibration, wsCcRfSmartEnableCoverageHoleRecover, wsCcRfSmartEnableInterferenceRecover, wsCcRfSmartEnableFaultyRadioRecover, wsCcRfSmartEnableRescuerAssign, wsCcRfSmartEnablePowerAssign, wsCcRfSmartEnableChannelAssign, wsCcRfSmartEnableDetectorAssign, wsCcRfSmartEnableSmartRF, wsCcRfRadioDefaultAntGain, wsCcRfSmartStatusAssignmentEvent, wsCcRfSmartStatusAssignmentIndex, wsCcRfSmartStatusCurrOper, wsCcRfSmartStatusNextCalStartTime, wsCcRfSmartStatusLastCalEndTime, wsCcRfSmartStatusLastCalStartTime, wsCcRfSmartRadioEnableRescuerLock, wsCcRfSmartRadioEnablePowerLock, wsCcRfSmartRadioEnableChannelLock, wsCcRfSmartRadioEnableDetectorLock, wsCcRfRadioAdmissionControlEnable, wsCcRfRadioDefaultAdmissionControlAccessCategory, wsCcRfRadioDefaultAdmissionControlMaxAirTime, wsCcRfRadioDefaultAdmissionControlReservedRoamTime, wsCcRfRadioDefaultAdmissionControlMaxAdmittedDevices, wsCcRfRadioAdmissionControlAccessCategory, wsCcRfRadioAdmissionControlMaxAirTime, wsCcRfRadioAdmissionControlReservedRoamTime, wsCcRfRadioAdmissionControlMaxAdmittedDevices, wsCcRfSmartEnableVerboseMode, wsCcRfSmartEnableExtensiveScanMode, wsCcRfSmartScanDwellTime, wsCcRfRadioAdmissionControlStatusAccessCategory, wsCcRfRadioAdmissionControlStatusAirTimeUsage, wsCcRfRadioAdmissionControlStatusAdmittedDevices, wsCcRfRadioAdmissionControlStatusRoamedDevices, wsCcRfRadioAdmissionControlStatusRequestDenied, wsCcRfHotspotMode, wsCcRfWlanAuthEapNACServerPort1, wsCcRfApExtSecureModeSecret, wsCcRfApExtSecureModeEnable, wsCcRfApExtSecureModeStagingEnable, wsCcRfSmartRadioMac, wsCcRfSmartRadioAntGain, wsCcRfSmartRadioCovRate, wsCcRfSmartMasterSwitchAddr, wsCcRfSmartIsClusterMaster, wsCcRfMasterSyncEnable, wsCcRfSmartRadioNeighborIndex, wsCcRfSmartRadioNeighborTxPower, wsCcRfSmartRadioNeighborCfgIdx, wsCcRfSmartRadioNeighborRxSignal, wsCcRfSmartRadioNeighborAttenuation, wsCcRfRadioDefaultAdmissionControlMaxRoamedDevices, wsCcRfRadioAdmissionControlMaxRoamedDevices, wsCcRfChannelManagerChan, wsCcRfChannelManagerSmartRfSel, wsCcRfChannelManagerSmartScanSel, wsCcRfSmartScanWlanMapWlan, wsCcRfSmartScanWlanMapSmartScanSel, wsCcRfApExtSecureWispeDefSecret, wsCcRfRapContainmentFinderCount, wsCcRfRapContainmentReportedChannel, wsCcRfSensorCfgWipsServerSecondaryIp, wsCcRfSensorCfgWipsServerPrimaryIp, wsCcRfSmartRadioNeighborMac, wsCcRfRadioStatusAssociatedVoiceMus, wsCcRfSmartPowerRangeHigherBound, wsCcRfSmartRadioHoldTime, wsCcRfSmartRadioRetryThrshld, wsCcRfSmartRadioCfgIndex, wsCcRfSmartPowerRangeLowerBound, wsCcRfApVoiceDelay, wsCcRfRadioDefault11nAmpduTxEnable, wsCcRfRadioDefault11nAmpduTxLimit, wsCcRfRadioDefault11nAmpduRxLimit, wsCcRfRadioDefault11nAmpduMinSpacing, wsCcRfRadioDefault11nShortGIEnable, wsCcRfRadio11nAmpduTxEnable, wsCcRfRadio11nAmpduTxLimit, wsCcRfRadio11nAmpduRxLimit, wsCcRfRadio11nAmpduMinSpacing, wsCcRfRadio11nShortGIEnable, wsCcRfRadioDefaultCp11nChannelWidth, wsCcRfRadioCp11nSecondaryChannel, wsCcRfWlanAuthEapRadiusDynamicAuthEnable, wsCcRfSensorRevertVlan, wsCcRfMuLockOutNow, wsCcRfSensorRevertSensorLastHeard, wsCcRfMuVoiceCallIndex, wsCcRfMuVoiceCallCodec, wsCcRfMuVoiceCallQualityMoscq, wsCcRfMuVoiceCallLostPackets, wsCcRfMuVoiceActive, wsCcRfMuVoiceDevType, wsCcRfRadioVoiceStatusSvpCalls, wsCcRfRadioVoiceStatusSccpCalls, wsCcRfRadioVoiceStatusSipCalls, wsCcRfRadioVoiceStatusOtherCalls, wsCcRfMuVoiceCallAvgLatency, wsCcRfMuVoiceCallAvgJitter, wsCcRfMuVoiceCallQualityR, wsCcRfMuVoiceCallProtocol, wsCcRfMuVoiceCallState, wsCcRfMuVoiceCallMediaProtocol, wsCcRfSmartRadioSwichIpAddr, wsCcRfSmartCalibrationStatusMessage, wsCcRfSmartRadioCurrChannel, wsCcRfRadioCp11nChannelWidth, wsCcRfApAapVersionType, wsCcRfRadioLedMode, wsCcRfMuAssocAclZone, wsCcRfMuVoiceCallStartTime, wsCcRfMuVoiceCallMac, wsCcRfApIfLinkUpCount, wsCcRfApIfSpeed, wsCcRfApIfMtu, wsCcRfApIfType, wsCcRfApIfName, wsCcRfApIfIndex, wsCcRfApManufacturer, wsCcRfApIfOutThroughput, wsCcRfApIfInThroughput, wsCcRfApExtCountryCode, wsCcRfSensorRevertPingInterval, wsCcRfSensorCfgIpMode, wsCcRfSensorCfgStaticIpDefaultGw, wsCcRfSensorCfgStaticIpNetMask, wsCcRfSensorCfgStaticIpAddr, wsCcRfWlanAuthEapAapProxyRealmStripEnable, wsCcRfWlanAuthEapAapProxyRealm, wsCcRfRapCfgType, wsCcRfWlanHttpAlgEnable, wsCcRfRapLocationingChannelSetForRadioBGN, wsCcRfRapLocationingChannelSetForRadioAN, wsCcRfRapUnapprovedApCnt, wsCcRfDot11kRadioEnable, wsCcRfDot11kRadioQuietElementDuration, wsCcRfDot11kRadioQuietElementFrequency, wsCcRfDot11kMuBeaconRequest, wsCcRfDot11kMuMeasurementDuration, wsCcRfWapiCertificateInstalled, wsCcRfWapiEnable, wsCcRfWapiWlanUnicastCipher, wsCcRfWapiWlanSATimeout, wsCcRfWapiWlanPSKValue, wsCcRfWapiWlanAuthServerIp, wsCcRfWapiWlanAuthEnable, wsCcRfWapiRadioAuthSuiteEnabled, wsCcRfWapiRadioAuthSuite, wsCcRfWapiRadioUnicastCipherSize, wsCcRfWapiRadioUnicastCipherEnabled, wsCcRfWapiRadioGroupCipherRequested, wsCcRfWapiRadioUnicastCipherRequested, wsCcRfWapiRadioBKIDUsed, wsCcRfWapiRadioMulticastCipherSelected, wsCcRfWapiRadioUnicastCipherSelected, wsCcRfWapiRadioMulticastCipherSize, wsCcRfWapiRadioMulticastCipher, wsCcRfWapiRadioUnicastKeysSupported, wsCcRfWapiRadioPreauthEnabled, wsCcRfWapiRadioPreauthImplemented, wsCcRfWapiRadioOptionImplemented, wsCcRfWapiRadioControlledPortControl, wsCcRfWapiRadioControlledAuthControl, wsCcRfWapiRadioVersion, wsCcRfWapiRadioEncEnable, wsCcRfWapiRadioAuthServerType, wsCcRfWapiRadioAuthSuiteSelected, wsCcRfWapiRadioAuthSuiteRequested, wsCcRfWapiRadioEnable, wsCcRfSmartRadioCurrPower, wsCcRfRadioState, wsCcRfWapiRadioMultiAccess, wsCcRfWapiWlanCertificateUpdateCount, wsCcRfWapiWlanMulticastUpdateCount, wsCcRfWlanRateLimitingDown, wsCcRfWlanRateLimitingUp, wsCcRfWapiWlanUnicastUpdateCount, wsCcRfIdsSuspiciousAPSignalStrengthThreshold, wsCcRfIdsApDefaultSSIDRowStatus, wsCcRfIdsApDefaultSSID, wsCcRfIdsApDefaultSSIDIndex, wsCcRfWlan80211wMFPCfgStatus, wsCcRfWlanSAQueryMaxTimeout, wsCcRfWlanSAQueryRetryTimeout, wsCcRfWlanDot11iSha256Enabled, wsCcRfIdsThresholdsTriggersReset, wsCcRfDot11kRadioQuietEnable, wsCcRfWapiWlanUnicastRekeyMethod, wsCcRfWapiWlanUnicastRekeyTime, wsCcRfWapiWlanUnicastRekeyPackets, wsCcRfWapiWlanMulticastRekeyMethod, wsCcRfWapiWlanMulticastRekeyTime, wsCcRfWapiWlanMulticastRekeyPackets, wsCcRfWapiWlanMulticastRekeyStrict, wsCcRfWapiWlanBKLifetime, wsCcRfWapiWlanBKReauthThreshold, wsCcRfApRadio3, wsCcRfIdsDisabled, wsCcRfRapMuAssistType, wsCcRfMuUpTime, wsCcRfApResStatusMemorySize, wsCcRfApResStatusMemoryFree, wsCcRfApResStatusFlashSize, wsCcRfApResStatusFlashFree, wsCcRfApResStatusCpuLoad, wsCcRfRadioStatusCurrWlans, wsCcRfApLldpAdminStatus, wsCcRfApLldpTxInterval, wsCcRfApLldpTxHoldMultiplier, wsCcRfMuLoadBalancingCountThresh, wsCcRfMuLoadBalancingThroughputThresh, wsCcRfApExtOperStatus, wsCcRfApAdoptionMode, wsCcRfRadioBridgeMaxClientBridgeMeshAssocs, wsCcRfApExtLan1NativeVlanTag, wsCcRfApExtLan2NativeVlanTag, wsCcRfApNumRadiosTotal, wsCcRfWlanDenyStaticMUEnable, wsCcRfApExtLan1NativeVlanId, wsCcRfRapIgnoredApTimeout, wsCcRfApExtReload, wsCcRfWlanAuthMethodSupportedIndex, wsCcRfWlanAuthMethodSupportedName, wsCcRfRadioFragmentationThresh, wsCcRfRadio11bRatesEnable, wsCcRfApUpCount, wsCcRfApDownCount, wsCcRfApResStatusMemoryType, wsCcRfApResStatusFlashType, wsCcRfMuMaxCount, wsCcRfRadioStatusApId, wsCcRfRadioApId, wsCcRfRadioCpApId, wsCcRfApId, wsCcRfApIfApId, wsCcRfApResStatusCpuType, wsCcRfApExtNetworkElementId, wsCcRfApExtApId, wsCcRfApExtCpuUsageThresh, wsCcRfApExtMemoryUsageThresh, wsCcRfSmartRadioApId, wsCcRfMuLoadBalancingMethodIndex, wsCcRfMuLoadBalancingThresh, wsCcRfMuLoadBalancingThreshUnit, wsCcRfMuLoadBalancingDiffThresh, wsCcRfMuCurrChannel, wsCcRfMuEssid, wsCcRfRadioStatusCurrBss, wsCcRfRadioDefaultMaxPwrAttenuation, wsCcRfRadioMaxRxLifetime, wsCcRfRadioRfEnable, wsCcRfRadioPwrAttenuation, wsCcRfRadioShortRetryLimit, wsCcRfRadioLongRetryLimit, wsCcRfWapiWlanPSKPassPhrase, wsCcRfIdsTriggerAuthorizedEnabled, wsCcRfIdsTriggerUnauthorizedEnabled, wsCcRfIdsTriggerIgnoredEnabled, wsCcRfRapStatusVendorName, wsCcRfRapStatusFirstTimeSeen, wsCcRfRapStatusBeaconInterval, wsCcRfRapStatusContained, wsCcRfRapStatusEncEnable, wsCcRfRapPermittedVendorIndex, wsCcRfRapPermittedVendorName, wsCcRfRapPermittedVendorRowStatus, wsCcRfIdsStatusVendorName, wsCcRfIdsStatusFirstTimeSeen, wsCcRfIdsStatusLastTimeSeen, wsCcRfIdsStatusMaxSignal, wsCcRfIdsStatusChannel, wsCcRfIdsStatusContained, wsCcRfIdsStatusAdhoc, wsCcRfIdsStatusFilteredMacCurr, wsCcRfApResStatusPeakMemoryFree, wsCcRfApResStatusAvgMemoryFree, wsCcRfApResStatusPeakCpuLoad, wsCcRfApResStatusAvgCpuLoad, wsCcRfApIfOutErrors, wsCcRfApIfInErrors, wsCcRfApIfOutOctets, wsCcRfApIfOutUcastPkts, wsCcRfApIfOutNucastPkts, wsCcRfApIfOutDiscards, wsCcRfApIfInOctets, wsCcRfApIfInUcastPkts, wsCcRfApIfInNucastPkts, wsCcRfApIfInDiscards, wsCcRfRadioStatusCurrSecondaryChannel, wsCcRfApExtIfNumber, wsCcRfRadioStatusMtu, wsCcRfRadioStatusSpeed, wsCcRfRadioStatusLastChange, wsCcRfRadioCpPowerMgmtEnable, wsCcRfRadioCpAcsChnExceptions, wsCcRfApUpTime, wsCcRfApOnlineTime, wsCcRfApExtLan1ManagementVlanId, wsCcRfApExtLan1TrunkingEnable, wsCcRfIpFilterListName, wsCcRfIpFilterListRuleIndex, wsCcRfIpFilterListDecision, wsCcRfIpFilterListProtocol, wsCcRfIpFilterListIpaddrSrcLower, wsCcRfIpFilterListIpaddrSrcUpper, wsCcRfIpFilterListIpaddrDestLower, wsCcRfIpFilterListIpaddrDestUpper, wsCcRfIpFilterListPortDestLower, wsCcRfIpFilterListPortDestUpper, wsCcRfIpFilterListRowStatus, wsCcRfIpFilterApRulesListApMac, wsCcRfIpFilterApRulesListName, wsCcRfIpFilterApRulesListRowStatus, wsCcRfIpFilterWlanRulesDirection, wsCcRfIpFilterWlanRulesNumbers, wsCcRfApExtLan1IpFilterRulesIn, wsCcRfApExtLan1IpFilterRulesOut, wsCcRfRadioWlanRowStatus, wsCcRfRadioWlanBssid, wsCcRfRadioWlanEssid, wsCcRfRadioMode, wsCcRfRadioWapiMode, wsCcRfApCurrBss, wsCcRfSmartRadioAntGainDbi, wsCcRfApExtMonitorMode, wsCcRfRadioStatusMode, wsCcRfRapStatusEncryptAlgorithm, wsCcRfRadioWmmAltAccessCategory, wsCcRfRadioWmmAltAifsn, wsCcRfRadioWmmAltTxOp, wsCcRfRadioWmmAltCwMin, wsCcRfRadioWmmAltCwMax, wsCcRfApExtInterferingApThresh, wsCcRfApExtInterferingMuThresh, wsCcRfRadio11nAmsduRxLimit, wsCcRfRadio11nAmsduTxEnable, wsCcRfRadioDefault11nAmsduRxLimit, wsCcRfRadioDefault11nAmsduTxEnable, wsCcRfRapCfgSsidFilter, wsCcRfRapCfgBssidFilter, wsCcRfRadioWlanBssIndex, wsCcRfWlanAltAuthentication, wsCcRfMuBlacklistIndex, wsCcRfMuBlacklistStartingMac, wsCcRfMuBlacklistEndingMac, wsCcRfMuBlacklistReason, wsCcRfMuBlacklistRemainingTime, wsCcRfApExtMfgCountryCode, wsCcRfRadioStatusUpdownTimes, wsCcRfWlanSecurity, wsCcRfWlanAltEncryption, wsCcRfMuSecurity, wsCcRfMuAltAuthentication, wsCcRfMuAltEncryption, wsCcRfApExtRadioConfiguration, wsCcRfIdsStatusRogueStaMonitorNum, wsCcRfApIfUpDownTimes, wsCcRfWlanEncAltWepKeyIndex, wsCcRfWlanEncAltWepKeyType, wsCcRfWlanEncAltWepKeyValue, wsCcRfMuLoadBalancingEnable, wsCcRfMuDot11Authentication, wsCcRfWlanDot11Authentication, wsCcRfRapStatusApAttacked, wsCcRfRapStatusApToIgnore, wsCcRfHotspotPreAuthVlan, wsCcRfWiredHotspotVlanAuthEapAuthProtocol, wsCcRfWiredHotspotVlanAuthEapDscpTos, wsCcRfWiredHotspotVlanAuthEapAccountingMode, wsCcRfWiredHotspotVlanAuthEapInterimAcctInterval, wsCcRfWiredHotspotVlanAuthEapAcctTimeout, wsCcRfWiredHotspotVlanAuthEapAcctRetries, wsCcRfWiredHotspotVlanAuthEapPrimaryServer, wsCcRfWiredHotspotVlanAuthEapSecondaryServer, wsCcRfWiredHotspotVlanAuthEapPrimarySrvrPort, wsCcRfWiredHotspotVlanAuthEapSecondarySrvrPort, wsCcRfWiredHotspotVlanAuthEapPrimarySecret, wsCcRfWiredHotspotVlanAuthEapSecondarySecret, wsCcRfWiredHotspotVlanIndex, wsCcRfWiredHotspotServerPrimaryIp, wsCcRfWiredHotspotServerPrimaryPort, wsCcRfWiredHotspotServerPrimarySecret, wsCcRfWiredHotspotServerSecondaryIp, wsCcRfWiredHotspotServerSecondaryPort, wsCcRfWiredHotspotServerSecondarySecret, wsCcRfWiredHotspotServerRetries, wsCcRfWiredHotspotServerTimeout, wsCcRfWiredHotspotWebsiteType, wsCcRfWiredHotspotLogoutOnClose, wsCcRfWiredHotspotRedirectToHostName, wsCcRfWiredHotspotSimultaneousUsers, wsCcRfWiredHotspotMode, wsCcRfWiredHotspotPageType, wsCcRfWiredHotspotPageIntPageTitle, wsCcRfWiredHotspotPageIntPageHeader, wsCcRfWiredHotspotPageIntPageDescr, wsCcRfWiredHotspotPageIntPageFooter, wsCcRfWiredHotspotPageIntPageImgUrl1, wsCcRfWiredHotspotPageIntPageImgUrl2, wsCcRfWiredHotspotPageExtPageUrl, wsCcRfWiredHotspotWhiteIpRuleIndex, wsCcRfWiredHotspotWhiteIpAddr, wsCcRfHotspotAuthFreeEnable, wsCcRfHotspotAuthRadiusEnable, wsCcRfHotspotAuthRedirectBackEnable, wsCcRfHotspotAuthRedirectBackDelay, wsCcRfHotspotAuthRedirectTo,wsCcRfHotspotAuthRedirectBackDelay,wsCcRfRadioAntennaGain, wsCcRfApExtSyslogServerEnable, wsCcRfApExtSyslogServerLevel, wsCcRfApExtSyslogServerIpAddr, wsCcRfApExtLEDStatus, wsCcRfApAapImgUpdFilename, wsCcRfApAapImgUpdIpAddress, wsCcRfApAapImgUpdLocation, wsCcRfApAapImgUpdMode, wsCcRfApAapImgUpdUsername, wsCcRfApAapImgUpdPassword, wsCcRfHotspotPageSetDefault, wsCcRfWiredHotspotVlanAuthEapRadiusDynamicAuthEnable, wsCcRfRadioNumber, wsCcRfProxyArpEnable, wsCcRfRadioDynamicChainSelEnable, wsCcRfWiredHotspotAccountingOption, wsCcRfWiredHotspotPageSetDefault, wsCcRfSmartRadioChannelWidth, wsCcRfHotspotAllowEap, wsCcRfHotspotCacheAgeout, wsCcRfHotspotConnectionMode, wsCcRfHotspotNTFLogoutPort, wsCcRfHotspotQueryIndices, wsCcRfWlanHotspotFailOverModeEnable, wsCcRfHotspotUpdSplashScreen, wsCcRfWlanAuthEapRadiusMACInCaps } STATUS current DESCRIPTION " " ::= { wsCcRfGroups 1 } -- 1.3.6.1.4.1.388.14.3.2.1.100.2.2 wsCcRfDeprecatedGroup OBJECT-GROUP OBJECTS { wsCcRfIdsMaxExcsvProbes, wsCcRfWlanDisallowMuToMu, wsCcRfHotspotPageLocation, wsCcRfWlanWeight, wsCcRfIdsMaxExcsvAssos, wsCcRfIdsMaxExcsvProbs, wsCcRfIdsMaxExcsvDisassos, wsCcRfIdsMaxExcsvAuthFailures, wsCcRfIdsMaxExcsvCryptoReplays, wsCcRfIdsMaxExcsv80211Replays, wsCcRfIdsMaxExcsvDecryptFails, wsCcRfIdsAnmlySrcMacEqDestMac, wsCcRfIdsAnmlyNullDestination, wsCcRfIdsAnmlySrcMulticastMac, wsCcRfIdsAnmlyWeakWepIv, wsCcRfIdsMuFilterAgeOutTime, wsCcRfIdsStatusFilteredMacMax, wsCcRfIdsEventPeriod, wsCcRfRapMaxRogue, wsCcRfRapTimeout, wsCcRfRadioStatusCfgMethod, wsCfRfMuProbeHistoryMac, wsCfRfMuProbeHistoryIndex, wsCfRfMuProbeHistoryTimeticks, wsCfRfMuProbeHistorySignalStrength, wsCfRfMuProbeHeardRadio, wsCcRfMuHistoryIndex, wsCcRfMuHistoryMac, wsCcRfMuHistoryRadioIndex, wsCcRfMuHistoryWlanIndex, wsCcRfMuHistoryTimestamp, wsCcRfMuHistoryEvent, wsCcRfSelfHealingMonitoringMinSig, wsCcRfSelfHealingMonitoringMaxSig, wsCcRfSelfHealingMonitoringSumSig, wsCcRfSelfHealingMonitoringNumSig, wsCcRfSelfHealingMonitoringTransRadio, wsCcRfSelfHealingMonitoringRecvRadio, wsCcRfSelfHealingMonitoringChannel, wsCcRfSelfHealingMonitoringLastTime, wsCcRfSelfHealingMonitoringLastSignal, wsCcRfRadioCcaLevel, wsCcRfRadioCcaMode, wsCcRfWlanGRETunnelGatewayMask, wsCcRfWlanGRETunnelGatewayIp, wsCcRfWlanGRETunnelIdx, wsCcRfWlanVlan, wsCcRfRadioDefaultWmmAdmissionCtrl, wsCcRfRadioRfFunctionWipsEnable, wsCcRfIdsMuFilterAgeOut, wsCcRfIdsMaxExcsvAssoc } STATUS deprecated DESCRIPTION "Group of deprecated objects." ::= { wsCcRfGroups 2 } END -- -- WS-CC-RF-MIB.my --