-- -- WS-INFRA-SYSMSG-MIB.my -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Monday, December 14, 2009 at 14:52:34 -- WS-INFRA-SYSMSG-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC wsInfraSysMsg FROM WS-INFRA-SMI-MIB DoActionNow FROM WS-TYPE-MIB; -- 1.3.6.1.4.1.388.14.1.3.1 wsInfraSysMsgModule MODULE-IDENTITY LAST-UPDATED "200912141444Z" -- December 14, 2009 at 14:44 GMT ORGANIZATION "Symbol Technologies" CONTACT-INFO "Symbol Technologies, Inc. Customer Service Postal: One Symbol Plaza Holtsville, NY 11742-1300 USA Tel: +1. 631.738.6213 E-mail: support@symbol.com Web: http://www.symbol.com/support" DESCRIPTION "Description." REVISION "200912141444Z" -- December 14, 2009 at 14:44 GMT DESCRIPTION "01a10 Added wsInfraSysMsgRemoteSvrActive." REVISION "200911111224Z" -- November 11, 2009 at 12:24 GMT DESCRIPTION "01a09 Added wsInfraSysMsgRemoteSvrPort" REVISION "200605241551Z" -- May 24, 2006 at 15:51 GMT DESCRIPTION "01a08" REVISION "200511031513Z" -- November 03, 2005 at 15:13 GMT DESCRIPTION "01a07" REVISION "200507281659Z" -- July 28, 2005 at 16:59 GMT DESCRIPTION "01a06" REVISION "200505111421Z" -- May 11, 2005 at 14:21 GMT DESCRIPTION "01a05" REVISION "200505091111Z" -- May 09, 2005 at 11:11 GMT DESCRIPTION "01a04" REVISION "200505051746Z" -- May 05, 2005 at 17:46 GMT DESCRIPTION "01a03" REVISION "200505041736Z" -- May 04, 2005 at 17:36 GMT DESCRIPTION "01a02" REVISION "200505041202Z" -- May 04, 2005 at 12:02 GMT DESCRIPTION "v01a01" ::= { wsInfraSysMsg 1 } -- -- Type definitions -- SysMsgSeverity ::= INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } -- -- Node definitions -- -- 1.3.6.1.4.1.388.14.1.3.1.1 wsInfraSysMsgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disables logging module." ::= { wsInfraSysMsgModule 1 } -- 1.3.6.1.4.1.388.14.1.3.1.2 wsInfraSysMsgAggTime OBJECT-TYPE SYNTAX Integer32 (0..60) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "If multiple messages of the same type are received in sysMsgAggTime second, only the first message will be sent followed by another message saying how many times it was repeated. The follow-up message mechanism will not be implemented in case of Snmp traps. 0 means this feature is disabled." ::= { wsInfraSysMsgModule 2 } -- Setting for system message output to buffer (local log file) -- 1.3.6.1.4.1.388.14.1.3.1.3 wsInfraSysMsgBuffer OBJECT IDENTIFIER ::= { wsInfraSysMsgModule 3 } -- 1.3.6.1.4.1.388.14.1.3.1.3.1 wsInfraSysMsgBufferEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable system message output to buffer (local log file)" ::= { wsInfraSysMsgBuffer 1 } -- 1.3.6.1.4.1.388.14.1.3.1.3.2 wsInfraSysMsgBufferSeverity OBJECT-TYPE SYNTAX SysMsgSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the system message of severity level of and below wsInfraSysMsgBufferSeverity will be sent." ::= { wsInfraSysMsgBuffer 2 } -- 1.3.6.1.4.1.388.14.1.3.1.3.3 wsInfraSysMsgBufferClear OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Clear buffer (local log file)" ::= { wsInfraSysMsgBuffer 3 } -- Setting for system message output to remote system log server -- 1.3.6.1.4.1.388.14.1.3.1.4 wsInfraSysMsgRemoteSvr OBJECT IDENTIFIER ::= { wsInfraSysMsgModule 4 } -- 1.3.6.1.4.1.388.14.1.3.1.4.1 wsInfraSysMsgRemoteSvrEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable system message output to remote system log server" ::= { wsInfraSysMsgRemoteSvr 1 } -- 1.3.6.1.4.1.388.14.1.3.1.4.2 wsInfraSysMsgRemoteSvrSeverity OBJECT-TYPE SYNTAX SysMsgSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the system message of severity level of and below wsInfraSysMsgRemoteSvrSeverity will be sent." ::= { wsInfraSysMsgRemoteSvr 2 } -- 1.3.6.1.4.1.388.14.1.3.1.4.3 wsInfraSysMsgRemoteSvrFacility OBJECT-TYPE SYNTAX INTEGER { logLocal0(0), logLocal1(1), logLocal2(2), logLocal3(3), logLocal4(4), logLocal5(5), logLocal6(6), logLocal7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to specify which switch is logging the message." ::= { wsInfraSysMsgRemoteSvr 3 } -- 1.3.6.1.4.1.388.14.1.3.1.4.4 wsInfraSysMsgRemoteSvrTable OBJECT-TYPE SYNTAX SEQUENCE OF WsInfraSysMsgRemoteSvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of remote log servers" ::= { wsInfraSysMsgRemoteSvr 4 } -- 1.3.6.1.4.1.388.14.1.3.1.4.4.1 wsInfraSysMsgRemoteSvrEntry OBJECT-TYPE SYNTAX WsInfraSysMsgRemoteSvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { wsInfraSysMsgRemoteSvrIndex } ::= { wsInfraSysMsgRemoteSvrTable 1 } WsInfraSysMsgRemoteSvrEntry ::= SEQUENCE { wsInfraSysMsgRemoteSvrIndex INTEGER, wsInfraSysMsgRemoteSvrIp IpAddress, wsInfraSysMsgRemoteSvrPort INTEGER, wsInfraSysMsgRemoteSvrActive TruthValue } -- 1.3.6.1.4.1.388.14.1.3.1.4.4.1.1 wsInfraSysMsgRemoteSvrIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Simple index" ::= { wsInfraSysMsgRemoteSvrEntry 1 } -- 1.3.6.1.4.1.388.14.1.3.1.4.4.1.2 wsInfraSysMsgRemoteSvrIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ip of the syslog server. Row inactive when Ip = 0.0.0.0" ::= { wsInfraSysMsgRemoteSvrEntry 2 } -- 1.3.6.1.4.1.388.14.1.3.1.4.4.1.3 wsInfraSysMsgRemoteSvrPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Port of the syslog server. " ::= { wsInfraSysMsgRemoteSvrEntry 3 } -- 1.3.6.1.4.1.388.14.1.3.1.4.4.1.4 wsInfraSysMsgRemoteSvrActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Activate logging on the syslog server. Logging can be active only when wsInfraSysMsgRemoteSvrIp is not 0.0.0.0." DEFVAL { true } ::= { wsInfraSysMsgRemoteSvrEntry 4 } -- Setting for system message output to console -- 1.3.6.1.4.1.388.14.1.3.1.5 wsInfraSysMsgConsole OBJECT IDENTIFIER ::= { wsInfraSysMsgModule 5 } -- 1.3.6.1.4.1.388.14.1.3.1.5.1 wsInfraSysMsgConsoleEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable system message output to console" ::= { wsInfraSysMsgConsole 1 } -- 1.3.6.1.4.1.388.14.1.3.1.5.2 wsInfraSysMsgConsoleSeverity OBJECT-TYPE SYNTAX SysMsgSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the system message of severity level of and below wsInfraSysMsgConsoleSeverity will be sent." ::= { wsInfraSysMsgConsole 2 } -- 1.3.6.1.4.1.388.14.1.3.1.6 wsInfraSysMsgMIBConformance OBJECT IDENTIFIER ::= { wsInfraSysMsgModule 6 } -- 1.3.6.1.4.1.388.14.1.3.1.6.1 wsInfraSysMsgMIBCompliances OBJECT IDENTIFIER ::= { wsInfraSysMsgMIBConformance 1 } -- 1.3.6.1.4.1.388.14.1.3.1.6.1.1 wsInfraSysMsgMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { wsInfraSysMsgMIBGroup } ::= { wsInfraSysMsgMIBCompliances 1 } -- 1.3.6.1.4.1.388.14.1.3.1.6.2 wsInfraSysMsgMIBGroups OBJECT IDENTIFIER ::= { wsInfraSysMsgMIBConformance 2 } -- 1.3.6.1.4.1.388.14.1.3.1.6.2.1 wsInfraSysMsgMIBGroup OBJECT-GROUP OBJECTS { wsInfraSysMsgEnable, wsInfraSysMsgBufferEnable, wsInfraSysMsgBufferSeverity, wsInfraSysMsgBufferClear, wsInfraSysMsgRemoteSvrEnable, wsInfraSysMsgRemoteSvrSeverity, wsInfraSysMsgRemoteSvrFacility, wsInfraSysMsgConsoleEnable, wsInfraSysMsgConsoleSeverity, wsInfraSysMsgRemoteSvrIndex, wsInfraSysMsgRemoteSvrPort, wsInfraSysMsgRemoteSvrActive, wsInfraSysMsgRemoteSvrIp, wsInfraSysMsgAggTime } STATUS current DESCRIPTION "Description." ::= { wsInfraSysMsgMIBGroups 1 } END -- -- WS-INFRA-SYSMSG-MIB.my --