-- -- WS-TRAP-MIB.my -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Monday, December 21, 2009 at 18:49:40 -- WS-TRAP-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, PhysAddress, TruthValue FROM SNMPv2-TC wsCcRfApResStatusMemoryFree, wsCcRfApResStatusCpuLoad, wsCcRfMuCnt, wsCcRfMuLastMac, wsCcRfMuMac, wsCcRfMuWlanIndex, wsCcRfMuRadioIndex, wsCcRfMuVlanIndex, wsCcRfMuKeyIndex, wsCcRfMuIpAddr, wsCcRfMuBSS, wsCcRfMuAuthMethod, wsCcRfMuEncMethod, wsCcRfMuRadioType, wsCcRfMuPowerMode, wsCcRfMuSupportedRates, wsCcRfMuVoice, wsCcRfMuIsDataReady, wsCcRfMuRogueApEna, wsCcRfMuIsWmm, wsCcRfMuDisassociateNow, wsCcRfRadioDescr, wsCcRfRapStatusMac, wsCcRfRapStatusHeardAp, wsCcRfIdsRadioIndex, wsCcRfIdsViolationType, wsCcRfIdsViolCountLastDetWindow, wsCcRfWlanIndex, wsCcRfWlanVlanIndex, wsCcRfWlanVlanUserLimit, wsCcRfHotspotExtPageUrl, wsCcRfLastAlarmEvent, wsCcRfApExtApMac, wsCcRfApExtCpuUsageThresh, wsCcRfApExtMemoryUsageThresh, wsCcRfApExtMonitorMode FROM WS-CC-RF-MIB wsCcStatsRadioIndex, wsCcStatsMuMac, wsCcStatsWlanIndex, wsCcStatsTrapCtrlConfIndex, wsCcStatsTrapCtrlConfUnits, wsCcStatsTrapCtrlConfThresholdMus, wsCcStatsTrapCtrlConfThresholdPortals, wsCcStatsTrapCtrlConfThresholdWlans, wsCcStatsTrapCtrlConfThresholdSwitch FROM WS-CC-STATS-MIB wsInfraClusterId, wsInfraClusterLicNum, wsInfraClusterApCnt, wsInfraClusterMemberIpAddr FROM WS-INFRA-CLUSTER-MIB wsInfraDiagTempCurrentTemp, wsInfraDiagTempHighTemp, wsInfraDiagTempHighTempHysteresis, wsInfraDiagSysFanSpeed, wsDiagProcFanSpeed, wsInfraHwTotalNum, wsInfraHwBuildInfoModuleIndex, wsInfraHwBuildInfoModuleName, wsInfraHwBuildInfoVersion, wsInfraHwBuildInfoManufacturer, wsInfraHwBuildInfoDesc, wsInfraResCpuLoad1, wsInfraResCpuLoad5, wsInfraResCpuLoad15, wsInfraFreeMemory, wsInfraRootFSFree, wsInfraRootFSInodesFree, wsInfraRamFSFree, wsInfraRamFSInodesFree, wsInfraFreeFileDesc, wsInfraUsedKernBuff32, wsInfraUsedKernBuff64, wsInfraUsedKernBuff128, wsInfraUsedKernBuff256, wsInfraUsedKernBuff512, wsInfraUsedKernBuff1024, wsInfraUsedKernBuff2048, wsInfraUsedKernBuff4096, wsInfraUsedKernBuff8192, wsInfraUsedKernBuff16384, wsInfraUsedKernBuff32768, wsInfraUsedKernBuff65536, wsInfraUsedKernBuff131072, wsInfraResCpuLoad1MinLimit, wsInfraResCpuLoad5MinLimit, wsInfraResCpuLoad15MinLimit, wsInfraUsedKernBuff32Limit, wsInfraUsedKernBuff64Limit, wsInfraUsedKernBuff128Limit, wsInfraUsedKernBuff256Limit, wsInfraUsedKernBuff512Limit, wsInfraUsedKernBuff1024Limit, wsInfraUsedKernBuff2048Limit, wsInfraUsedKernBuff4096Limit, wsInfraUsedKernBuff8192Limit, wsInfraUsedKernBuff16384Limit, wsInfraUsedKernBuff32768Limit, wsInfraUsedKernBuff65536Limit, wsInfraUsedKernBuff131072Limit, wsInfraDiagMonitoredFSTableIndex, wsInfraDiagMonitoredFSName, wsInfraDiagMonitoredFSFreeSpace, wsInfraDiagMonitoredFSFreeSpacePercent, wsInfraDiagMonitoredFSFreeSpaceLimit, wsInfraDiagMonitoredFSSize, wsInfraDiagMonitoredFSUsed, wsInfraDiagMonitoredFSINodesFree, wsInfraDiagMonitoredFSINodesLimit, wsInfraDiagTempIndex, wsInfraDiagTempSensorName, wsInfraDiagTempCurrTemp, wsInfraDiagTempMaxTemp, wsInfraDiagTempOverTemp, wsInfraDiagFanIndex, wsInfraDiagFanName, wsInfraDiagFanSpeed, wsInfraDiagFanLowSpeedLimit, wsInfraDiagProcIndex, wsInfraDiagProcName, wsInfraDiagProcPercentCPU, wsInfraDiagProcPercentMem, wsInfraDiagRamStatsTotal, wsInfraDiagRamStatsUsed, wsInfraDiagRamStatsFree, wsInfraDiagRamStatsPercentFree, wsInfraDiagRamStatsPercentFreeLimit, wsInfraDiagPktBuffAlloc, wsInfraDiagPktBuffUsed, wsInfraDiagPktBuffMax, wsInfraDiagIpRouteCacheAlloc, wsInfraDiagIpRouteCacheUsed, wsInfraDiagIpRouteCacheMax, wsInfraDiagFileDescInUse, wsInfraDiagFileDescHWM, wsInfraDiagFileDescLimit, wsInfraDiagProcMemLimit FROM WS-INFRA-DIAG-MIB wsInfraProcMonProcessName, wsInfraProcMonProcessMaxRestart FROM WS-INFRA-PM-MIB wsMgmtCertViewTrustpoint FROM WS-MGMT-MIB wsTrap FROM WS-SMI wsSwMobilityPeerIp, wsSwMobilityPeerJOINSent, wsSwMobilityPeerJOINRecvd, wsSwMobilityPeerLEAVESent, wsSwMobilityPeerLEAVERecvd, wsSwMobilityPeerL2ROAMSent, wsSwMobilityPeerL2ROAMRecvd, wsSwMobilityPeerL3ROAMSent, wsSwMobilityPeerL3ROAMRecvd, wsSwMobilityPeerSessionState, wsSwMobilityPeerClearStatistics, wsSwMobilityPeerRowStatus, wsSwMobilityMUMACAddr, wsSwMobilityMUIPAddress, wsSwMobilityMUHSIPAddr, wsSwMobilityMUCSIPAddr, wsSwMobilityMUHSVLAN, wsSwMobilityLocalAddr, wsSwMobilityEnable, wsSwMobilityRoamPeriod, wsSwMobilityMibCompliance, wsSwMobilityGroup FROM WS-SW-MOBILITY-MIB SmtpNotifyBitMap, DoActionNow FROM WS-TYPE-MIB; -- 1.3.6.1.4.1.388.14.5.1 wsTrapMIB MODULE-IDENTITY LAST-UPDATED "200912172303Z" -- December 17, 2009 at 23:03 GMT ORGANIZATION "Symbol Technologies" CONTACT-INFO "Symbol Technologies, Inc. Customer Service Postal: One Symbol Plaza Holtsville, NY 11742-1300 USA Tel: +1. 631.738.6213 E-mail: support@symbol.com Web: http://www.symbol.com/support" DESCRIPTION "This MIB defines all the Traps that can occur within the WLAN module. The following functionality is provided for Enabling/Disabling traps : 1. Each trap has a 'read-write' Enable 'Truth-Value' Flag associated with it. 2. The Traps are organized in groups on a per module basis. Each module has two 'doActionNow' variables to Enable & Disable ALL the traps within that module. Setting these variables directly changes the Enable Flags of all the traps within that module. 3. There is a Global Trap Enable 'Truth-Value' Flag which determines whether any trap is sent out or not. Setting this variable does not affect the settings of the individual traps." REVISION "200912171103Z" -- December 17, 2009 at 11:03 GMT DESCRIPTION "02a17 Added traps: wsTrapWirelessRadioDetectedDeviceInterference wsTrapWirelessRadioDetectedDeviceInterferenceRecover wsTrapWirelessRadioModuleTrouble wsTrapWirelessRadioModuleTroubleRecover wsTrapWirelessRadioDown wsTrapWirelessRadioDownRecover Added objects: wsTrapEnableWirelessRadioDetectedDeviceInterference wsTrapEnableWirelessRadioDetectedDeviceInterferenceRecover wsTrapEnableWirelessRadioModuleTrouble wsTrapEnableWirelessRadioModuleTroubleRecover wsTrapEnableWirelessRadioDown wsTrapEnableWirelessRadioDownRecover " REVISION "200912162002Z" -- December 16, 2009 at 20:02 GMT DESCRIPTION "02a16 add bindings to wsTrapWirelessIdsUnauthorizedSsid" REVISION "200905141620Z" -- May 14, 2009 at 16:20 GMT DESCRIPTION "02a15 Added following trap: wsTrapDiagTempTooHighRecover" REVISION "200912111412Z" -- December 11, 2009 at 14:12 GMT DESCRIPTION "02a14 Added the following trap and objects: - wsTrapWirelessIdsUnauthorizedSsid - wsTrapWirelessIdsSsid - wsTrapEnableWirelessIdsUnauthorizedSsid" REVISION "200912021355Z" -- December 02, 2009 at 13:55 GMT DESCRIPTION "02a13 Added the following traps: - wsTrapWirelessRadioDetectedApInterferenceRecover - wsTrapWirelessRadioDetectedMuInterferenceRecover Added the following objects: - wsTrapEnableWirelessRadioDetectedApInterferenceRecover - wsTrapEnableWirelessRadioDetectedMuInterferenceRecover " REVISION "200911171816Z" -- November 17, 2009 at 18:16 GMT DESCRIPTION "02a12 Added the following traps: - wsTrapSnmpWarmStart - wsTrapWirelessWlanWebPortalAvailable - wsTrapWirelessWlanRadiusAuthServUnavailable - wsTrapWirelessWlanRadiusAuthServAvailable - wsTrapWirelessWlanRadiusAccServUnavailable - wsTrapWirelessWlanRadiusAccServAvailable - wsTrapDHCPServerAddressExhaust - wsTrapDHCPServerAddressExhaustRecover Added the following objects: - wsTrapEnableSnmpWarmStart - wsTrapEnableWirelessWlanWebPortalAvailable - wsTrapWirelessWlanRadiusAuthServIpAddr - wsTrapEnableWirelessWlanRadiusAuthServUnavailable - wsTrapEnableWirelessWlanRadiusAuthServAvailable - wsTrapWirelessWlanRadiusAccServIpAddr - wsTrapEnableWirelessWlanRadiusAccServUnavailable - wsTrapEnableWirelessWlanRadiusAccServAvailable - wsTrapDHCPServerPool - wsTrapEnableDHCPServerAddressExhaust - wsTrapEnableDHCPServerAddressExhaustRecover" REVISION "200911171159Z" -- November 17, 2009 at 11:59 GMT DESCRIPTION "02a11 Added: wsTrapDiagConfigErrorLine, wsTrapDiagConfigError, wsTrapEnableConfigError, wsTrapDiagCpuUsageTooHigh, wsTrapEnableDiagCpuUsageTooHigh, wsTrapDiagCpuUsageTooHighRecover, wsTrapEnableDiagCpuUsageTooHighRecover, wsTrapDiagMemUsageLimit, wsTrapDiagMemUsageTooHigh, wsTrapEnableDiagMemUsageTooHigh, wsTrapDiagMemUsageTooHighRecover, wsTrapEnableDiagMemUsageTooHighRecover, wsTrapWirelessRadioDfsFreeCountBelowThreshRecover, wsTrapEnableWirelessRadioDfsFreeCountBelowThreshRecover, wsTrapWirelessAp, wsTrapEnableAllWirelessApTrap, wsTrapDisableAllWirelessApTrap, wsTrapSmtpNotifyWirelessApTrap, wsTrapWirelessApCpuUsageTooHigh, wsTrapWirelessApEnableCpuUsageTooHigh, wsTrapWirelessApCpuUsageTooHighRecover, wsTrapWirelessApEnableCpuUsageTooHighRecover, wsTrapWirelessApMemUsageTooHigh, wsTrapWirelessApEnableMemUsageTooHigh, wsTrapWirelessApMemUsageTooHighRecover, wsTrapWirelessApEnableMemUsageTooHighRecover, wsTrapWirelessApMonitorModeChanged, wsTrapEnableWirelessApMonitorModeChanged, wsTrapWirelessApSwUpdateFail, wsTrapEnableWirelessApSwUpdateFail, wsTrapWirelessApSsidKeyConflict, wsTrapEnableWirelessApSsidKeyConflict" REVISION "200908041105Z" -- August 04, 2009 at 11:05 GMT DESCRIPTION "02a10 Added the following objects: - wsTrapWirelessRadioApSwitchTimeSyncFailure - wsTrapEnableWirelessRadioApSwitchTimeSyncFailure" REVISION "200907311512Z" -- July 31, 2009 at 15:12 GMT DESCRIPTION "02a09 Made the following object name changes: - wsTrapNsmStaticIPChanged to wsTrapNsmSwitchIPChanged. - wsTrapEnableNsmStaticIPChanged to wsTrapEnableNsmSwitchIPChanged - wsTrapWirelessRadioMuThresh to wsTrapWirelessRadioDfsFreeThresh - wsTrapWirelessRadioExceededMuCountThresh to wsTrapWirelessRadioDfsFreeCountBelowThresh - wsTrapEnableWirelessRadioExceededMuCountThresh to wsTrapEnableWirelessRadioDfsFreeCountBelowThresh" REVISION "200907251742Z" -- July 25, 2009 at 17:42 GMT DESCRIPTION "02a08 Added the following objects: - wsTrapWirelessRadioCertResult - wsTrapWirelessRadioInvalidCertAttack - wsTrapEnableWirelessRadioInvalidCertAttack - wsTrapWirelessRadioStationRepetitiveAttack - wsTrapEnableWirelessRadioStationRepetitiveAttack - wsTrapWirelessRadioTamperAttack - wsTrapEnableWirelessRadioTamperAttack - wsTrapWirelessRadioLowSafeLevelAttack - wsTrapEnableWirelessRadioLowSafeLevelAttack - wsTrapWirelessRadioAddressRedirectionAttack - wsTrapEnableWirelessRadioAddressRedirectionAttack" REVISION "200907171404Z" -- July 17, 2009 at 14:04 GMT DESCRIPTION "02a07 Added the following objects: - wsTrapNsmApIPChanged - wsTrapEnableNsmApIPChanged - wsTrapNsmStaticIPChanged - wsTrapEnableNsmStaticIPChanged - wsTrapWirelessInterferingMac - wsTrapWirelessRadioMuThresh - wsTrapWirelessRadioFlashWriteError - wsTrapEnableWirelessRadioFlashWriteError - wsTrapWirelessRadioDetectedApInterference - wsTrapEnableWirelessRadioDetectedApInterference - wsTrapWirelessRadioDetectedMuInterference - wsTrapEnableWirelessRadioDetectedMuInterference - wsTrapWirelessRadioExceededMuCountThresh - wsTrapEnableWirelessRadioExceededMuCountThresh" REVISION "200906091739Z" -- June 09, 2009 at 17:39 GMT DESCRIPTION "02a06 added accessible-for-notify object wsTrapWirelessAPIpAddress" REVISION "200902031655Z" -- February 03, 2009 at 16:55 GMT DESCRIPTION "Added new trap wsTrapWirelessIgnoredAPDetected Added new object wsTrapEnableWirelessIgnoredAPDetected" REVISION "200805011815Z" -- May 01, 2008 at 18:15 GMT DESCRIPTION "02a04 Added OIDs to configure e-mail notification of traps." REVISION "200802011320Z" -- February 01, 2008 at 13:20 GMT DESCRIPTION "02a03 Under node wsTrapWirelessWlan add the traps: - Web Portal Unreachable - Web Portal Unavailable - Web Portal Unconnected" REVISION "200704231623Z" -- April 23, 2007 at 16:23 GMT DESCRIPTION "02a02" REVISION "200702061203Z" -- February 06, 2007 at 12:03 GMT DESCRIPTION "02a01" REVISION "200610311306Z" -- October 31, 2006 at 13:06 GMT DESCRIPTION "01a16" REVISION "200609251858Z" -- September 25, 2006 at 18:58 GMT DESCRIPTION "01a15" REVISION "200609241810Z" -- September 24, 2006 at 18:10 GMT DESCRIPTION "01a14" REVISION "200609051530Z" -- September 05, 2006 at 15:30 GMT DESCRIPTION "01a13" REVISION "200608280936Z" -- August 28, 2006 at 09:36 GMT DESCRIPTION "01a12" REVISION "200607071104Z" -- July 07, 2006 at 11:04 GMT DESCRIPTION "01a11" REVISION "200606201301Z" -- June 20, 2006 at 13:01 GMT DESCRIPTION "01a10" REVISION "200601061606Z" -- January 06, 2006 at 16:06 GMT DESCRIPTION "01a08" REVISION "200605251250Z" -- May 25, 2006 at 12:50 GMT DESCRIPTION "01a09" ::= { wsTrap 1 } -- -- Node definitions -- -- Node definitions -- 1.3.6.1.4.1.388.14.5.1.1 wsTrapSnmp OBJECT IDENTIFIER ::= { wsTrapMIB 1 } -- 1.3.6.1.4.1.388.14.5.1.1.1 wsTrapSnmpColdStart NOTIFICATION-TYPE STATUS current DESCRIPTION "Agent reinitialized; configuration may have changed. Solution: Not applicable. Other Possibilities: None. Severity: TP_SEV_MAJOR " ::= { wsTrapSnmp 1 } -- 1.3.6.1.4.1.388.14.5.1.1.2 wsTrapEnableSnmpColdStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapSnmp 2 } -- 1.3.6.1.4.1.388.14.5.1.1.3 wsTrapSnmpLinkDown NOTIFICATION-TYPE OBJECTS { wsTrapNsmIfDescr } STATUS current DESCRIPTION "No connectivity on the port. Solution: Check if blade is properly inserted in the slot. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: Interface: [str] " ::= { wsTrapSnmp 3 } -- 1.3.6.1.4.1.388.14.5.1.1.4 wsTrapEnableSnmpLinkDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapSnmp 4 } -- 1.3.6.1.4.1.388.14.5.1.1.5 wsTrapSnmpLinkUp NOTIFICATION-TYPE OBJECTS { wsTrapNsmIfDescr } STATUS current DESCRIPTION "Connectivity on the port has been restored. Solution: Not Applicable. Other Possibilities: None. Severity: TP_SEV_NORM Message: Interface: [str] " ::= { wsTrapSnmp 5 } -- 1.3.6.1.4.1.388.14.5.1.1.6 wsTrapEnableSnmpLinkUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapSnmp 6 } -- 1.3.6.1.4.1.388.14.5.1.1.7 wsTrapSnmpAuthenticationFail NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP user authentication failed. Solution: Check the user-id/password/community name. Other Possibilities: None. Severity: TP_SEV_CRIT " ::= { wsTrapSnmp 7 } -- 1.3.6.1.4.1.388.14.5.1.1.8 wsTrapEnableSnmpAuthFail OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapSnmp 8 } -- 1.3.6.1.4.1.388.14.5.1.1.9 wsTrapEnableAllSnmpTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapSnmp 9 } -- 1.3.6.1.4.1.388.14.5.1.1.10 wsTrapDisableAllSnmpTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapSnmp 10 } -- 1.3.6.1.4.1.388.14.5.1.1.11 wsTrapSmtpNotifySnmpTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of SNMP related traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapSnmp 11 } -- 1.3.6.1.4.1.388.14.5.1.1.12 wsTrapSnmpWarmStart NOTIFICATION-TYPE STATUS current DESCRIPTION "Agent reinitialized; configuration is unaltered. Solution: Not applicable. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: Warm Start" ::= { wsTrapSnmp 12 } -- 1.3.6.1.4.1.388.14.5.1.1.13 wsTrapEnableSnmpWarmStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable warm start trap." ::= { wsTrapSnmp 13 } -- 1.3.6.1.4.1.388.14.5.1.2 wsTrapUpdSvr OBJECT IDENTIFIER ::= { wsTrapMIB 2 } -- 1.3.6.1.4.1.388.14.5.1.3 wsTrapNsm OBJECT IDENTIFIER ::= { wsTrapMIB 3 } -- 1.3.6.1.4.1.388.14.5.1.3.1 wsTrapNsmIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapNsm 1 } -- 1.3.6.1.4.1.388.14.5.1.3.2 wsTrapNsmIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapNsm 2 } -- 1.3.6.1.4.1.388.14.5.1.3.3 wsTrapNsmIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapNsm 3 } -- 1.3.6.1.4.1.388.14.5.1.3.4 wsTrapNsmDhcpIPChanged NOTIFICATION-TYPE OBJECTS { wsTrapNsmIfDescr, wsTrapNsmIpAdEntAddr, wsTrapNsmIpAdEntNetMask } STATUS current DESCRIPTION "Interface IP Address assigned by DHCP has changed. Solution: If a different DHCP server assigned the IP address this time, disable the unwanted server and restart the blade. Other Possibilities: Time may not be correctly set on the blade. If the current time on the blade is significantly off from the time on the DHCP server, the same DHCP server may assign a new IP address when the lease is renewed. Severity: TP_SEV_NORM Message: Interface: [str], New IP: [str]/[uint] " ::= { wsTrapNsm 4 } -- 1.3.6.1.4.1.388.14.5.1.3.5 wsTrapEnableNsmDhcpIPChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapNsm 5 } -- 1.3.6.1.4.1.388.14.5.1.3.6 wsTrapEnableAllNsmTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapNsm 6 } -- 1.3.6.1.4.1.388.14.5.1.3.7 wsTrapDisableAllNsmTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapNsm 7 } -- 1.3.6.1.4.1.388.14.5.1.3.8 wsTrapSmtpNotifyNsmTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of NSM traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapNsm 8 } -- 1.3.6.1.4.1.388.14.5.1.3.9 wsTrapNsmApIPChanged NOTIFICATION-TYPE OBJECTS { wsTrapWirelessAPMac, wsTrapNsmIpAdEntAddr, wsTrapNsmIpAdEntNetMask } STATUS current DESCRIPTION "IP Address assigned to the Access Port has changed. Solution: If a different DHCP server assigned the IP address this time, disable the unwanted server and restart the wireless switch. Other Possibilities: None. Severity: TP_SEV_NORM Message: Radio-Port: [mac], New IP: [ip]/[uint]" ::= { wsTrapNsm 9 } -- 1.3.6.1.4.1.388.14.5.1.3.10 wsTrapEnableNsmApIPChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Access Port IP Address changed trap." ::= { wsTrapNsm 10 } -- 1.3.6.1.4.1.388.14.5.1.3.11 wsTrapNsmSwitchIPChanged NOTIFICATION-TYPE OBJECTS { wsTrapNsmIfDescr, wsTrapNsmIpAdEntAddr, wsTrapNsmIpAdEntNetMask } STATUS current DESCRIPTION "IP Address of switch or access controller interface has changed. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: Interface: [str], New IP: [str]/[uint]" ::= { wsTrapNsm 11 } -- 1.3.6.1.4.1.388.14.5.1.3.12 wsTrapEnableNsmSwitchIPChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable IP Address change trap for switch or access controller interface." ::= { wsTrapNsm 12 } -- 1.3.6.1.4.1.388.14.5.1.4 wsTrapDiag OBJECT IDENTIFIER ::= { wsTrapMIB 4 } -- 1.3.6.1.4.1.388.14.5.1.4.1 wsTrapDiagTempHigh NOTIFICATION-TYPE OBJECTS { wsInfraDiagTempSensorName, wsInfraDiagTempCurrTemp, wsInfraDiagTempMaxTemp, wsInfraDiagTempOverTemp } STATUS current DESCRIPTION "Temperature greater than High limit. Solution: None. Other Possibilities: None. Message: Location: [str]; current temp = [uint], high temp = [uint] critical temp = [uint] " ::= { wsTrapDiag 1 } -- 1.3.6.1.4.1.388.14.5.1.4.2 wsTrapEnableDiagTempHigh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 2 } -- 1.3.6.1.4.1.388.14.5.1.4.3 wsTrapDiagTempOver NOTIFICATION-TYPE OBJECTS { wsInfraDiagTempSensorName, wsInfraDiagTempCurrTemp, wsInfraDiagTempMaxTemp, wsInfraDiagTempOverTemp } STATUS current DESCRIPTION "Temperature greater than Critical limit. Solution: None. Other Possibilities: None. Message: Location: [str]; current temp = [uint], high temp = [uint] critical temp = [uint] " ::= { wsTrapDiag 3 } -- 1.3.6.1.4.1.388.14.5.1.4.4 wsTrapEnableDiagTempOver OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 4 } -- 1.3.6.1.4.1.388.14.5.1.4.5 wsTrapDiagFanSpeedLow NOTIFICATION-TYPE OBJECTS { wsInfraDiagFanName, wsInfraDiagFanSpeed, wsInfraDiagFanLowSpeedLimit } STATUS current DESCRIPTION "Fan speed lower than limit. Solution: None. Other Possibilities: None. Message: Name is [str] Current speed = [uint], Limit = [uint] " ::= { wsTrapDiag 5 } -- 1.3.6.1.4.1.388.14.5.1.4.6 wsTrapEnableDiagFanSpeedLow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 6 } -- 1.3.6.1.4.1.388.14.5.1.4.7 wsTrapDiagResCpuLoad1Min NOTIFICATION-TYPE OBJECTS { wsInfraResCpuLoad1MinLimit, wsInfraResCpuLoad1 } STATUS current DESCRIPTION "CPU load in last minute averaged greater than limit. Solution: lower usage. Other Possibilities: None. Message: Current load = [uint], Limit = [uint] " ::= { wsTrapDiag 7 } -- 1.3.6.1.4.1.388.14.5.1.4.8 wsTrapEnableDiagResCpuLoad1Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 8 } -- 1.3.6.1.4.1.388.14.5.1.4.9 wsTrapDiagResCpuLoad5Min NOTIFICATION-TYPE OBJECTS { wsInfraResCpuLoad5MinLimit, wsInfraResCpuLoad5 } STATUS current DESCRIPTION "CPU load in last five minutes averaged greater than 5-minute limit. Solution: lower usage. Other Possibilities: None. Message: Current load = [uint], Limit = [uint] " ::= { wsTrapDiag 9 } -- 1.3.6.1.4.1.388.14.5.1.4.10 wsTrapEnableDiagResCpuLoad5Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 10 } -- 1.3.6.1.4.1.388.14.5.1.4.11 wsTrapDiagResCpuLoad15Min NOTIFICATION-TYPE OBJECTS { wsInfraResCpuLoad15, wsInfraResCpuLoad15MinLimit } STATUS current DESCRIPTION "CPU load in last 15 minutes averaged greater than 15-minute limit. Solution: lower usage. Other Possibilities: None. Message: Current load = [uint], Limit = [uint] " ::= { wsTrapDiag 11 } -- 1.3.6.1.4.1.388.14.5.1.4.12 wsTrapEnableDiagResCpuLoad15Min OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 12 } -- 1.3.6.1.4.1.388.14.5.1.4.13 wsTrapDiagUsedKernBuffSize OBJECT-TYPE SYNTAX Integer32 (32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768 | 65536 | 131072) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 13 } -- 1.3.6.1.4.1.388.14.5.1.4.14 wsTrapDiagUsedKernBuffUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 14 } -- 1.3.6.1.4.1.388.14.5.1.4.15 wsTrapDiagUsedKernBuffLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 15 } -- 1.3.6.1.4.1.388.14.5.1.4.16 wsTrapDiagUsedKernBuff NOTIFICATION-TYPE OBJECTS { wsTrapDiagUsedKernBuffSize, wsTrapDiagUsedKernBuffUsed, wsTrapDiagUsedKernBuffLimit } STATUS current DESCRIPTION "Usage of kernel buffer greater than limit for given size. Solution: defrag memory. Other Possibilities: None. Message: kernel buffer size = [uint], used = [uint], Limit = [uint] " ::= { wsTrapDiag 16 } -- 1.3.6.1.4.1.388.14.5.1.4.17 wsTrapEnableUsedKernBuff OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 17 } -- 1.3.6.1.4.1.388.14.5.1.4.18 wsTrapDiagRamFree NOTIFICATION-TYPE OBJECTS { wsInfraDiagRamStatsTotal, wsInfraDiagRamStatsUsed, wsInfraDiagRamStatsFree, wsInfraDiagRamStatsPercentFree, wsInfraDiagRamStatsPercentFreeLimit } STATUS current DESCRIPTION "Usage of RAM greater than limit. Solution: None. Other Possibilities: None. Message: total = [uint], used = [uint], free = [uint], percent free ram = [uint], percent limit = [uint] " ::= { wsTrapDiag 18 } -- 1.3.6.1.4.1.388.14.5.1.4.19 wsTrapEnableDiagRamFree OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 19 } -- 1.3.6.1.4.1.388.14.5.1.4.20 wsTrapDiagProcMemUsage NOTIFICATION-TYPE OBJECTS { wsInfraDiagProcMemLimit, wsInfraDiagProcName, wsInfraDiagProcPercentCPU, wsInfraDiagProcPercentMem } STATUS current DESCRIPTION "Memory usage of given process greater than limit. Solution: None. Other Possibilities: None. Message: Process: [str]; percent mem = [uint], percent cpu = [uint] mem limit =[uint] " ::= { wsTrapDiag 20 } -- 1.3.6.1.4.1.388.14.5.1.4.21 wsTrapEnableDiagProcMemUsage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 21 } -- 1.3.6.1.4.1.388.14.5.1.4.22 wsTrapDiagPktBuf NOTIFICATION-TYPE OBJECTS { wsInfraDiagPktBuffAlloc, wsInfraDiagPktBuffUsed, wsInfraDiagPktBuffMax } STATUS current DESCRIPTION "Usage of packet buffer greater than limit. Solution: None. Other Possibilities: None. Message: packet buffer allocated = [uint], used = [uint], limit = [uint] " ::= { wsTrapDiag 22 } -- 1.3.6.1.4.1.388.14.5.1.4.23 wsTrapEnableDiagPktBuf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 23 } -- 1.3.6.1.4.1.388.14.5.1.4.24 wsTrapDiagIpRouteCache NOTIFICATION-TYPE OBJECTS { wsInfraDiagIpRouteCacheAlloc, wsInfraDiagIpRouteCacheUsed, wsInfraDiagIpRouteCacheMax } STATUS current DESCRIPTION "IP Route Cache too large. Solution: None. Other Possibilities: None. Message: ip route cache allocated = [uint], size = [uint], Limit = [uint] " ::= { wsTrapDiag 24 } -- 1.3.6.1.4.1.388.14.5.1.4.25 wsTrapEnableDiagIpRouteCache OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 25 } -- 1.3.6.1.4.1.388.14.5.1.4.26 wsTrapDiagFileDesc NOTIFICATION-TYPE OBJECTS { wsInfraDiagFileDescInUse, wsInfraDiagFileDescHWM, wsInfraDiagFileDescLimit } STATUS current DESCRIPTION "Too many file descriptors used. Solution: None. Other Possibilities: None. Message: fds in used = [uint], fd highwater = [uint], fd limit = [uint] " ::= { wsTrapDiag 26 } -- 1.3.6.1.4.1.388.14.5.1.4.27 wsTrapEnableDiagFileDesc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 27 } -- 1.3.6.1.4.1.388.14.5.1.4.28 wsTrapEnableAllDiagTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 28 } -- 1.3.6.1.4.1.388.14.5.1.4.29 wsTrapDisableAllDiagTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapDiag 29 } -- 1.3.6.1.4.1.388.14.5.1.4.30 wsTrapSmtpNotifyDiagTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Diagnostics traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapDiag 30 } -- 1.3.6.1.4.1.388.14.5.1.4.31 wsTrapDiagConfigErrorLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Configuration file parsing error message." ::= { wsTrapDiag 31 } -- 1.3.6.1.4.1.388.14.5.1.4.32 wsTrapDiagConfigError NOTIFICATION-TYPE OBJECTS { wsTrapDiagConfigErrorLine } STATUS current DESCRIPTION "Configuration file parsing error message. Solution: None. Severity: TP_SEV_NORM Other Possibilities: None. Message: Error message [str]" ::= { wsTrapDiag 32 } -- 1.3.6.1.4.1.388.14.5.1.4.33 wsTrapEnableDiagConfigError OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable configuration file parsing error trap." ::= { wsTrapDiag 33 } -- 1.3.6.1.4.1.388.14.5.1.4.34 wsTrapDiagCpuUsageTooHigh NOTIFICATION-TYPE OBJECTS { wsInfraResCpuLoad1, wsInfraResCpuLoad1MinLimit } STATUS current DESCRIPTION "CPU use greater than High limit. Solution: None. Severity: TP_SEV_WARN Other Possibilities: None. Message: CPU use [int32] High limit [int] " ::= { wsTrapDiag 34 } -- 1.3.6.1.4.1.388.14.5.1.4.35 wsTrapEnableDiagCpuUsageTooHigh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable CPU use greater than high limit trap." ::= { wsTrapDiag 35 } -- 1.3.6.1.4.1.388.14.5.1.4.36 wsTrapDiagCpuUsageTooHighRecover NOTIFICATION-TYPE OBJECTS { wsInfraResCpuLoad1, wsInfraResCpuLoad1MinLimit } STATUS current DESCRIPTION "CPU use lower than High limit. Solution: None. Severity: TP_SEV_WARN Other Possibilities: None. Message: CPU use [int32] High limit [int] " ::= { wsTrapDiag 36 } -- 1.3.6.1.4.1.388.14.5.1.4.37 wsTrapEnableDiagCpuUsageTooHighRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable CPU use lower than high limit trap." ::= { wsTrapDiag 37 } -- 1.3.6.1.4.1.388.14.5.1.4.38 wsTrapDiagMemUsageLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Mem usage high limit." ::= { wsTrapDiag 38 } -- 1.3.6.1.4.1.388.14.5.1.4.39 wsTrapDiagMemUsageTooHigh NOTIFICATION-TYPE OBJECTS { wsInfraDiagRamStatsFree, wsTrapDiagMemUsageLimit } STATUS current DESCRIPTION "Memory use greater than High limit. Solution: None. Severity: TP_SEV_WARN Other Possibilities: None. Message: Free memory [int] High limit [int] " ::= { wsTrapDiag 39 } -- 1.3.6.1.4.1.388.14.5.1.4.40 wsTrapEnableDiagMemUsageTooHigh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable memory use greater than high limit trap. " ::= { wsTrapDiag 40 } -- 1.3.6.1.4.1.388.14.5.1.4.41 wsTrapDiagMemUsageTooHighRecover NOTIFICATION-TYPE OBJECTS { wsInfraDiagRamStatsFree, wsTrapDiagMemUsageLimit } STATUS current DESCRIPTION "Memory use lower than High limit. Solution: None. Severity: TP_SEV_WARN Other Possibilities: None. Message: Free memory [int] High limit [int] " ::= { wsTrapDiag 41 } -- 1.3.6.1.4.1.388.14.5.1.4.42 wsTrapEnableDiagMemUsageTooHighRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable memory use lower than high limit trap." ::= { wsTrapDiag 42 } -- 1.3.6.1.4.1.388.14.5.1.4.43 wsTrapDiagTempTooHighRecover NOTIFICATION-TYPE OBJECTS { wsInfraDiagTempSensorName, wsInfraDiagTempCurrTemp, wsInfraDiagTempMaxTemp, wsInfraDiagTempOverTemp } STATUS current DESCRIPTION "Temperature now lower than High limit. Solution: None. Other Possibilities: None. Message: Location: [str]; current temp = [uint], high temp = [uint] critical temp = [uint] " ::= { wsTrapDiag 43 } -- 1.3.6.1.4.1.388.14.5.1.4.44 wsTrapEnableDiagTempTooHighRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable temperature recovered from exceeding high limit trap." ::= { wsTrapDiag 44 } -- 1.3.6.1.4.1.388.14.5.1.5 wsTrapCluster OBJECT IDENTIFIER ::= { wsTrapMIB 5 } -- 1.3.6.1.4.1.388.14.5.1.5.1 wsTrapClusterMemberUp NOTIFICATION-TYPE OBJECTS { wsInfraClusterMemberIpAddr, wsInfraClusterId } STATUS current DESCRIPTION "Heartbeats are getting exchanged with this member. Solution: None Other Possibilities: None. Severity: TP_SEV_NORM Message: Member: [ip], Redundancy group ID: [uint] " ::= { wsTrapCluster 1 } -- 1.3.6.1.4.1.388.14.5.1.5.2 wsTrapEnableClusterMemberUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 2 } -- 1.3.6.1.4.1.388.14.5.1.5.3 wsTrapClusterMemberDown NOTIFICATION-TYPE OBJECTS { wsInfraClusterId, wsInfraClusterMemberIpAddr } STATUS current DESCRIPTION "No longer able to see this member. Solution: 1.The member may be rebooted. 2. Check that the member is reachable via network using ping. Other Possibilities: None. Severity: TP_SEV_WARN Message: Member: [ip], Redundancy group ID: [uint] " ::= { wsTrapCluster 3 } -- 1.3.6.1.4.1.388.14.5.1.5.4 wsTrapEnableClusterMemberDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 4 } -- 1.3.6.1.4.1.388.14.5.1.5.5 wsTrapClusterMemberMisConfigured NOTIFICATION-TYPE OBJECTS { wsInfraClusterId, wsInfraClusterMemberIpAddr } STATUS current DESCRIPTION "The member cluster parameter is not sync with this switch. Solution: Check all the cluster parameters are configured same in both switches. (For ex - heartbeat interval, discovery interval, cluster id, hold interval etc.) Other Possibilities: None. Severity: TP_SEV_WARN Message: Member: [ip], Redundancy group ID: [uint] " ::= { wsTrapCluster 5 } -- 1.3.6.1.4.1.388.14.5.1.5.6 wsTrapEnableClusterMemberMisConfig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 6 } -- 1.3.6.1.4.1.388.14.5.1.5.7 wsTrapClusterAdoptionExceeded NOTIFICATION-TYPE OBJECTS { wsInfraClusterId, wsInfraClusterApCnt, wsInfraClusterLicNum } STATUS current DESCRIPTION "All switches in this cluster adopted more access ports than the cluster license. Solution: 1. It is a transient condition, but it will converge back to normal. 2. Remove excess of ports from the network. Other Possibilities: None. Severity: TP_SEV_WARN Message: Redundancy group ID: [uint], Adoption count: [uint], Group Authorization level: [uint] " ::= { wsTrapCluster 7 } -- 1.3.6.1.4.1.388.14.5.1.5.8 wsTrapEnableClusterAdoptionExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 8 } -- 1.3.6.1.4.1.388.14.5.1.5.9 wsTrapClusterLicenseChanged NOTIFICATION-TYPE OBJECTS { wsInfraClusterId, wsInfraClusterLicNum } STATUS current DESCRIPTION "Cluster license has been changed. It may either be decreased or increased. Solution: Decrease in cluster license may be because of license downgrade happened. Other Possibilities: None. Message: Redundancy group ID: [uint], Group Authorization level: [uint] " ::= { wsTrapCluster 9 } -- 1.3.6.1.4.1.388.14.5.1.5.10 wsTrapEnableClusterLicChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 10 } -- 1.3.6.1.4.1.388.14.5.1.5.11 wsTrapEnableAllClusterTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 11 } -- 1.3.6.1.4.1.388.14.5.1.5.12 wsTrapDisableAllClusterTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapCluster 12 } -- 1.3.6.1.4.1.388.14.5.1.5.13 wsTrapCriticalResourceUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The critical-resource (gateway ) is up. Solution: None Other Possibilities: None. " ::= { wsTrapCluster 13 } -- 1.3.6.1.4.1.388.14.5.1.5.14 wsTrapEnableCriticalResourceUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable this to get the trap when the critical-resource(gateway) is up." ::= { wsTrapCluster 14 } -- 1.3.6.1.4.1.388.14.5.1.5.15 wsTrapCriticalResourceDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The critical-resource (gateway ) is down. Solution: Check the connectivity between the gateway and wireless switch. Try pinging to the gateway to check it's connectivity. Other Possibilities: None. " ::= { wsTrapCluster 15 } -- 1.3.6.1.4.1.388.14.5.1.5.16 wsTrapEnableCriticalResourceDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable this to get the trap when the critical-resource(gateway) is down. " ::= { wsTrapCluster 16 } -- 1.3.6.1.4.1.388.14.5.1.5.17 wsTrapSmtpNotifyClusterTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Cluster traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapCluster 17 } -- 1.3.6.1.4.1.388.14.5.1.6 wsTrapMisc OBJECT IDENTIFIER ::= { wsTrapMIB 6 } -- 1.3.6.1.4.1.388.14.5.1.6.1 wsTrapMiscLowFileSystemSpace NOTIFICATION-TYPE OBJECTS { wsInfraDiagMonitoredFSName, wsInfraDiagMonitoredFSFreeSpace, wsInfraDiagMonitoredFSFreeSpaceLimit } STATUS current DESCRIPTION "Low free space on one of the monitored file systems. Solution: Remove some files from that file system. Other Possibilities: None. Severity: TP_SEV_WARN Message: [str] File System - Free space: [uint] is lower than limit: [uint] " ::= { wsTrapMisc 1 } -- 1.3.6.1.4.1.388.14.5.1.6.2 wsTrapEnableMiscLowFileSystemSpace OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapMisc 2 } -- 1.3.6.1.4.1.388.14.5.1.6.3 wsTrapMiscProcessMaxRestartsReached NOTIFICATION-TYPE OBJECTS { wsInfraProcMonProcessName, wsInfraProcMonProcessMaxRestart } STATUS current DESCRIPTION "The max restart count of this process by the Process Monitor has been reached. Solution: Please contact technical support. Other Possibilities: None. Severity: TP_SEV_CRIT Message: Process Name: [str], Max Restart Count: [uint] " ::= { wsTrapMisc 3 } -- 1.3.6.1.4.1.388.14.5.1.6.4 wsTrapEnableMiscProcMaxRestart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapMisc 4 } -- 1.3.6.1.4.1.388.14.5.1.6.5 wsTrapMiscSavedConfigModified NOTIFICATION-TYPE STATUS current DESCRIPTION "A trap generated when the command 'write mem' is run from the CLI to save the modified config. Solution: Not applicable. Other Possibilities: None. " ::= { wsTrapMisc 5 } -- 1.3.6.1.4.1.388.14.5.1.6.6 wsTrapEnableMiscSavedConfigModified OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A scalar for enabling the trap wsTrapMiscSavedConfigModified to be sent by the SNMP agent on the switch." ::= { wsTrapMisc 6 } -- 1.3.6.1.4.1.388.14.5.1.6.7 wsTrapMiscServerCertExpired NOTIFICATION-TYPE OBJECTS { wsMgmtCertViewTrustpoint } STATUS current DESCRIPTION "Server certificate Expired. Solution: Install a valid server certificate. Other Possibilities: None. Severity: TP_SEV_CRIT Message: server certificate expired for the trustpoint [str] " ::= { wsTrapMisc 7 } -- 1.3.6.1.4.1.388.14.5.1.6.8 wsTrapEnableMiscServerCertExpired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapMisc 8 } -- 1.3.6.1.4.1.388.14.5.1.6.9 wsTrapMiscCaCertExpired NOTIFICATION-TYPE OBJECTS { wsMgmtCertViewTrustpoint } STATUS current DESCRIPTION "Ca certificate Expired Solution: Install a valid ca certificate. Other Possibilities: None. Severity: TP_SEV_CRIT Message: ca certificate expired for the trustpoint [str] " ::= { wsTrapMisc 9 } -- 1.3.6.1.4.1.388.14.5.1.6.10 wsTrapEnableMiscCaCertExpired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapMisc 10 } -- 1.3.6.1.4.1.388.14.5.1.6.11 wsTrapEnableAllMiscTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapMisc 11 } -- 1.3.6.1.4.1.388.14.5.1.6.12 wsTrapDisableAllMiscTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapMisc 12 } -- 1.3.6.1.4.1.388.14.5.1.6.13 wsTrapMiscPeriodicHeartbeat NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap/heartbeat shall be triggered only if no other SNMP Trap was sent by that switch in the specified time frame. Solution: None. Other Possibilities: None. Severity: TP_SEV_INFO Message: periodic heartbeat from the switch " ::= { wsTrapMisc 13 } -- 1.3.6.1.4.1.388.14.5.1.6.14 wsTrapEnableMiscPeriodicHeartbeat OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the periodic system heartbeat trap." ::= { wsTrapMisc 14 } -- 1.3.6.1.4.1.388.14.5.1.6.15 wsTrapMiscSwitchEvent NOTIFICATION-TYPE OBJECTS { wsCcRfRadioDescr, wsCcRfLastAlarmEvent } STATUS current DESCRIPTION "An AP or switch related event. This could be one of the following- AP shut down alarm AP channel configuration is changed Interference on current channel is detected Radius authentication server is unreachable/unavailable/unconnected Radius accounting server cannot be connected Solution: None. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: other important events from the switch network element ID: [str] event : [str] " ::= { wsTrapMisc 15 } -- 1.3.6.1.4.1.388.14.5.1.6.16 wsTrapEnableMiscSwitchEvent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the miscellaneous switch event notification." ::= { wsTrapMisc 16 } -- 1.3.6.1.4.1.388.14.5.1.6.17 wsTrapSmtpNotifyMiscTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Miscellaneous traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapMisc 17 } -- 1.3.6.1.4.1.388.14.5.1.7 wsTrapWireless OBJECT IDENTIFIER ::= { wsTrapMIB 7 } -- 1.3.6.1.4.1.388.14.5.1.7.1 wsTrapWirelessStation OBJECT IDENTIFIER ::= { wsTrapWireless 1 } -- 1.3.6.1.4.1.388.14.5.1.7.1.1 wsTrapWirelessStationMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 1 } -- 1.3.6.1.4.1.388.14.5.1.7.1.2 wsTrapWirelessStationRadioNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 2 } -- 1.3.6.1.4.1.388.14.5.1.7.1.3 wsTrapWirelessStationLimitOnRadio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 3 } -- 1.3.6.1.4.1.388.14.5.1.7.1.4 wsTrapWirelessStationAssociated NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "A station has associated to the wlan controller. Solution: If this is not an authorized station, add it to the Access Control List or increase your wireless security. Other Possibilities: None. Severity: TP_SEV_NORM Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 4 } -- 1.3.6.1.4.1.388.14.5.1.7.1.5 wsTrapEnableWirelessStationAssoc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 5 } -- 1.3.6.1.4.1.388.14.5.1.7.1.6 wsTrapWirelessStationDisassociated NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "A station has disassociated from the wlan controller. Solution: Make sure your station is powered on and within the service area of the wlan controller. Other Possibilities: The station may not have the correct credentials to associate to the wlan. Severity: TP_SEV_NORM Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 6 } -- 1.3.6.1.4.1.388.14.5.1.7.1.7 wsTrapEnableWirelessStationDisAssoc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 7 } -- 1.3.6.1.4.1.388.14.5.1.7.1.8 wsTrapWirelessStationDeniedAssociationOnCapability NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association due to conflicts in the 802.11 capabilities field. Solution: The station needs to be updated to support the correct capability fields. Other Possibilities: None. Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 8 } -- 1.3.6.1.4.1.388.14.5.1.7.1.9 wsTrapEnableWirelessStationDenAssocOnCap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 9 } -- 1.3.6.1.4.1.388.14.5.1.7.1.10 wsTrapWirelessStationDeniedAssociationOnShortPreamble NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association because it does not support short preamble. Solution: Turn off short preamble on the wlan or update the station so it can support short preamble. Other Possibilities: None. Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 10 } -- 1.3.6.1.4.1.388.14.5.1.7.1.11 wsTrapEnableWirelessStationDenAssocOnShortPmbl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 11 } -- 1.3.6.1.4.1.388.14.5.1.7.1.12 wsTrapWirelessStationDeniedAssociationOnSpectrum NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association because it does not support spectrum magagement. Solution: The country and channel of operation require spectrum management on stations. Update your station or try a different channel. Other Possibilities: None. Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 12 } -- 1.3.6.1.4.1.388.14.5.1.7.1.13 wsTrapEnableWirelessStationDenAssocOnSpectrum OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 13 } -- 1.3.6.1.4.1.388.14.5.1.7.1.14 wsTrapWirelessStationDeniedAssociationOnErr NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association because the 802.11 packet was malformed. Solution: Check your station hardware and software for errors. Other Possibilities: Interference or a cracking attempt. Severity: TP_SEV_WARN Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 14 } -- 1.3.6.1.4.1.388.14.5.1.7.1.15 wsTrapEnableWirelessStationDenAssocOnErr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 15 } -- 1.3.6.1.4.1.388.14.5.1.7.1.16 wsTrapWirelessStationDeniedAssociationOnSSID NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association because the SSID supplied by the MU was too large. Solution: Check your MU software. It appears to be sending a malformed association request. Other Possibilities: Interference or a cracking attempt. Severity: TP_SEV_WARN Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 16 } -- 1.3.6.1.4.1.388.14.5.1.7.1.17 wsTrapEnableWirelessStationDenAssocOnSSID OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 17 } -- 1.3.6.1.4.1.388.14.5.1.7.1.18 wsTrapWirelessStationDeniedAssociationOnRates NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association because it does not support the rates required. Solution: Reduce the supported rate set on the radio or update the radio on the station to support the required rates. Other Possibilities: None. Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 18 } -- 1.3.6.1.4.1.388.14.5.1.7.1.19 wsTrapEnableWirelessStationDenAssocOnRates OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 19 } -- 1.3.6.1.4.1.388.14.5.1.7.1.20 wsTrapWirelessStationDeniedAssociationOnInvalidWPA NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied association because it did not send a WPA/WPA2 element. Solution: Ensure the station supports WPA/WPA2 or turn off WPA/WPA2. Other Possibilities: None. Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 20 } -- 1.3.6.1.4.1.388.14.5.1.7.1.21 wsTrapEnableWirelessStationDenAssocOnInvalidWPA OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 21 } -- 1.3.6.1.4.1.388.14.5.1.7.1.22 wsTrapWirelessStationDeniedAssociationAsPortCapacityReached NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum, wsTrapWirelessStationLimitOnRadio } STATUS current DESCRIPTION "The station was denied association because the radio it was attempting to associate to has reached its station limit. Solution: Increase the number of stations that can associate to the radio or increase radio density to allow for more stations. Other Possibilities: None. Message: Station: [mac], radio: [uint], maximum Station: [uint] " ::= { wsTrapWirelessStation 22 } -- 1.3.6.1.4.1.388.14.5.1.7.1.23 wsTrapEnableWirelessStationDenAssocAsPortCapReached OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 23 } -- 1.3.6.1.4.1.388.14.5.1.7.1.24 wsTrapWirelessStationTkipCounterMeasures NOTIFICATION-TYPE STATUS current DESCRIPTION "There have been 2 or more TKIP MIC checksum failures in the last 60 seconds, as a result that Wireless Lan has been disabled for 60 seconds. MIC failures can occur either because someone is trying to attack the network and guess your TKIP keys, or because of some stations that have drivers that generate invalid frames. Solution: View the system logs to see which wireless station is generating these MIC failures. If it is on your network, then take that station off the network for now. Contact support. Other Possibilities: If your network is setup for eap authentication with TKIP encryption, and there are frequent reauthentications, MIC failures can occur. If this is the case, try reducing the frequency of re-authentications, and see if it helps with the countermeasures. Again see if the failures are caused by one particular station. Severity: TP_SEV_WARN Message: Activated " ::= { wsTrapWirelessStation 24 } -- 1.3.6.1.4.1.388.14.5.1.7.1.25 wsTrapEnableWirelessStationTkipCntMeasures OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 25 } -- 1.3.6.1.4.1.388.14.5.1.7.1.26 wsTrapWirelessStationDeniedAuthentication NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac } STATUS current DESCRIPTION "The station was denied authentication due to the maximum number of stations being reached for the controller. Solution: Add another controller to you network or reduce the number of stations. Other Possibilities: The authentication algorithm being used by the WLAN is not supported by the station or a malformed auth packet from the station. Severity: TP_SEV_MAJOR Message: Station: [mac] " ::= { wsTrapWirelessStation 26 } -- 1.3.6.1.4.1.388.14.5.1.7.1.27 wsTrapEnableWirelessStationDenAuth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 27 } -- 1.3.6.1.4.1.388.14.5.1.7.1.28 wsTrapWirelessStationRadiusAuthFailed NOTIFICATION-TYPE OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum } STATUS current DESCRIPTION "The station was denied access to the wlan because Radius authentication failed. Solution: Check radius server connectivity and the stations username/password. Other Possibilities: None Severity: TP_SEV_MAJOR Message: Station: [mac], radio: [uint] " ::= { wsTrapWirelessStation 28 } -- 1.3.6.1.4.1.388.14.5.1.7.1.29 wsTrapEnableWirelessStationRadAuthFail OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 29 } -- 1.3.6.1.4.1.388.14.5.1.7.1.30 wsTrapEnableAllWirelessStationTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 30 } -- 1.3.6.1.4.1.388.14.5.1.7.1.31 wsTrapDisableAllWirelessStationTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessStation 31 } -- 1.3.6.1.4.1.388.14.5.1.7.1.32 wsTrapWirelessStationVlanChanged NOTIFICATION-TYPE OBJECTS { wsCcRfMuMac, wsCcRfMuVlanIndex, wsCcRfMuWlanIndex } STATUS current DESCRIPTION "Station's vlan id is changed. Solution: Check IP connectivity with Peer IP-address. Other Possibilities: None. Message: Station: [mac], assigned with new vlan id:[uint] on wlan :[uint] " ::= { wsTrapWirelessStation 32 } -- 1.3.6.1.4.1.388.14.5.1.7.1.33 wsTrapEnableWirelessStationVlanChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the trap for station VLAN change" ::= { wsTrapWirelessStation 33 } -- 1.3.6.1.4.1.388.14.5.1.7.1.34 wsTrapSmtpNotifyWirelessStationTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless Station traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessStation 34 } -- 1.3.6.1.4.1.388.14.5.1.7.2 wsTrapWirelessRadio OBJECT IDENTIFIER ::= { wsTrapWireless 2 } -- 1.3.6.1.4.1.388.14.5.1.7.2.1 wsTrapWirelessRadioName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 1 } -- 1.3.6.1.4.1.388.14.5.1.7.2.2 wsTrapWirelessRadioChannelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 2 } -- 1.3.6.1.4.1.388.14.5.1.7.2.3 wsTrapWirelessAPMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC address of associated AP." ::= { wsTrapWirelessRadio 3 } -- 1.3.6.1.4.1.388.14.5.1.7.2.4 wsTrapWirelessRadioAdopted NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessAPIpAddress } STATUS current DESCRIPTION "A radio was adopted by the wlan controller. Solution: If this is not a authorized station, turn off adopt-unconf-radio Other Possibilities: None. Severity: TP_SEV_NORM Message: Radio [str], on Radio-Port [mac] at AP IP Address [ip] " ::= { wsTrapWirelessRadio 4 } -- 1.3.6.1.4.1.388.14.5.1.7.2.5 wsTrapEnableWirelessRadioAdopted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 5 } -- 1.3.6.1.4.1.388.14.5.1.7.2.6 wsTrapWirelessRadioUnadopted NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessAPIpAddress } STATUS current DESCRIPTION "A radio was un-adopted from the wlan controller. Solution: Check network connectivity between the controller and radio port. Other Possibilities: The radio was removed or reconfigured. Message: Radio [str] on Radio-Port [mac] at AP IP Address [ip] " ::= { wsTrapWirelessRadio 6 } -- 1.3.6.1.4.1.388.14.5.1.7.2.7 wsTrapEnableWirelessRadioUnadopted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 7 } -- 1.3.6.1.4.1.388.14.5.1.7.2.8 wsTrapWirelessRadioDetectedRadar NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessRadioChannelNum, wsTrapWirelessAPMac } STATUS current DESCRIPTION "A radio detected radar on its channel of operation and is switching channels. Solution: Retry the channel later. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac], channel [uint] " ::= { wsTrapWirelessRadio 8 } -- 1.3.6.1.4.1.388.14.5.1.7.2.9 wsTrapEnableWirelessRadioDetectedRadar OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 9 } -- 1.3.6.1.4.1.388.14.5.1.7.2.10 wsTrapEnableAllWirelessRadioTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 10 } -- 1.3.6.1.4.1.388.14.5.1.7.2.11 wsTrapDisableAllWirelessRadioTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessRadio 11 } -- 1.3.6.1.4.1.388.14.5.1.7.2.12 wsTrapSmtpNotifyWirelessRadioTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless Radio traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessRadio 12 } -- 1.3.6.1.4.1.388.14.5.1.7.2.13 wsTrapWirelessAPIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Ip address of associated AP." ::= { wsTrapWirelessRadio 13 } -- 1.3.6.1.4.1.388.14.5.1.7.2.14 wsTrapWirelessInterferingMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC address of the interfering Access Port or Mobile Unit." ::= { wsTrapWirelessRadio 14 } -- 1.3.6.1.4.1.388.14.5.1.7.2.15 wsTrapWirelessRadioDfsFreeThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The threshold for DFS free count associated with a radio." ::= { wsTrapWirelessRadio 15 } -- 1.3.6.1.4.1.388.14.5.1.7.2.16 wsTrapWirelessRadioFlashWriteError NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac } STATUS current DESCRIPTION "Write to the Access Port flash has failed. Solution: Retry the flash write later. Other Possibilities: None. Severity: TP_SEV_WARN Message: Flash write error in Radio [str] on Radio-Port [mac]" ::= { wsTrapWirelessRadio 16 } -- 1.3.6.1.4.1.388.14.5.1.7.2.17 wsTrapEnableWirelessRadioFlashWriteError OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Access Port flash write error trap." ::= { wsTrapWirelessRadio 17 } -- 1.3.6.1.4.1.388.14.5.1.7.2.18 wsTrapWirelessRadioDetectedApInterference NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessRadioChannelNum, wsTrapWirelessAPMac, wsTrapWirelessInterferingMac } STATUS current DESCRIPTION "A radio detected interference on its channel of operation caused by another AP. Solution: Remedy the interfering AP. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Detected by Radio [str] on Radio-Port [mac], Interfering AP [mac], channel [uint]" ::= { wsTrapWirelessRadio 18 } -- 1.3.6.1.4.1.388.14.5.1.7.2.19 wsTrapEnableWirelessRadioDetectedApInterference OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable AP interference detected trap." ::= { wsTrapWirelessRadio 19 } -- 1.3.6.1.4.1.388.14.5.1.7.2.20 wsTrapWirelessRadioDetectedMuInterference NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessRadioChannelNum, wsTrapWirelessAPMac, wsTrapWirelessInterferingMac } STATUS current DESCRIPTION "A radio detected interference on its channel of operation caused by a mobile unit. Solution: Remedy the interfering mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Detected by Radio [str] on Radio-Port [mac], Interfering MU [mac], channel [uint]" ::= { wsTrapWirelessRadio 20 } -- 1.3.6.1.4.1.388.14.5.1.7.2.21 wsTrapEnableWirelessRadioDetectedMuInterference OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Mobile Unit interference detected trap." ::= { wsTrapWirelessRadio 21 } -- 1.3.6.1.4.1.388.14.5.1.7.2.22 wsTrapWirelessRadioDfsFreeCountBelowThresh NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessRadioDfsFreeThresh } STATUS current DESCRIPTION "The DFS free count associated with a radio is below threshold. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: Radio [str] on Radio-Port [mac] below threshold [uint]" ::= { wsTrapWirelessRadio 22 } -- 1.3.6.1.4.1.388.14.5.1.7.2.23 wsTrapEnableWirelessRadioDfsFreeCountBelowThresh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for DFS free count below threshold." ::= { wsTrapWirelessRadio 23 } -- 1.3.6.1.4.1.388.14.5.1.7.2.24 wsTrapWirelessRadioCertResult OBJECT-TYPE SYNTAX INTEGER { issuerUnknown(1), untrustedRoot(2), invalidTime(3), invalidSignature(4), revoked(5), invalidForProposedUsage(6), revocationStateUnknown(7), unknownError(8) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The certificate result. issuerUnknown : the issuer is unknown untrustedRoot : the certificate is based on an untrusted root invalidTime : the certificate is not time valid invalidSignature : the certificate have not a valid signature revoked : the certificate is revoked invalidForProposedUsage : the certificate is not valid for proposed usage revocationStateUnknown : the revocation state of the certificate is unknown unknownError : the certificate has an unknown error" ::= { wsTrapWirelessRadio 24 } -- 1.3.6.1.4.1.388.14.5.1.7.2.25 wsTrapWirelessRadioInvalidCertAttack NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessStationMac, wsTrapWirelessRadioCertResult } STATUS current DESCRIPTION "The radio might be under invalid certificate attack. Solution: Remedy the mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac], Station [mac], response code: [uint]" ::= { wsTrapWirelessRadio 25 } -- 1.3.6.1.4.1.388.14.5.1.7.2.26 wsTrapEnableWirelessRadioInvalidCertAttack OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for invalid certificate attack." ::= { wsTrapWirelessRadio 26 } -- 1.3.6.1.4.1.388.14.5.1.7.2.27 wsTrapWirelessRadioStationRepetitiveAttack NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessStationMac } STATUS current DESCRIPTION "The radio might be under repetitive attack. Solution: Remedy the mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac], Station [mac]" ::= { wsTrapWirelessRadio 27 } -- 1.3.6.1.4.1.388.14.5.1.7.2.28 wsTrapEnableWirelessRadioStationRepetitiveAttack OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for repetitive attack." ::= { wsTrapWirelessRadio 28 } -- 1.3.6.1.4.1.388.14.5.1.7.2.29 wsTrapWirelessRadioTamperAttack NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessStationMac } STATUS current DESCRIPTION "The radio might be under tamper attack. Solution: Remedy the mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac], Station [mac]" ::= { wsTrapWirelessRadio 29 } -- 1.3.6.1.4.1.388.14.5.1.7.2.30 wsTrapEnableWirelessRadioTamperAttack OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for tamper attack." ::= { wsTrapWirelessRadio 30 } -- 1.3.6.1.4.1.388.14.5.1.7.2.31 wsTrapWirelessRadioLowSafeLevelAttack NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessStationMac } STATUS current DESCRIPTION "The radio might be under Low Safe Level attack. Solution: Remedy the mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac], Station [mac]" ::= { wsTrapWirelessRadio 31 } -- 1.3.6.1.4.1.388.14.5.1.7.2.32 wsTrapEnableWirelessRadioLowSafeLevelAttack OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for Low Safe Level attack." ::= { wsTrapWirelessRadio 32 } -- 1.3.6.1.4.1.388.14.5.1.7.2.33 wsTrapWirelessRadioAddressRedirectionAttack NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessStationMac } STATUS current DESCRIPTION "The radio might be under address redirection attack. Solution: Remedy the mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac], Station [mac]" ::= { wsTrapWirelessRadio 33 } -- 1.3.6.1.4.1.388.14.5.1.7.2.34 wsTrapEnableWirelessRadioAddressRedirectionAttack OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for address redirection attack." ::= { wsTrapWirelessRadio 34 } -- 1.3.6.1.4.1.388.14.5.1.7.2.35 wsTrapWirelessRadioApSwitchTimeSyncFailure NOTIFICATION-TYPE OBJECTS { wsTrapWirelessAPMac } STATUS current DESCRIPTION "Time synchronization from switch or access controller to AP has failed. Solution: Check network connectivity between the controller and AP. Other Possibilities: The AP was removed or reconfigured. Severity: TP_SEV_WARN Message: Time synchronization failure in AP [mac]" ::= { wsTrapWirelessRadio 35 } -- 1.3.6.1.4.1.388.14.5.1.7.2.36 wsTrapEnableWirelessRadioApSwitchTimeSyncFailure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for time synchronization failure from switch or access controller to AP." ::= { wsTrapWirelessRadio 36 } -- 1.3.6.1.4.1.388.14.5.1.7.2.37 wsTrapWirelessRadioDfsFreeCountBelowThreshRecover NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessRadioDfsFreeThresh } STATUS current DESCRIPTION "The DFS free count associated with a radio is below threshold. Solution: None. Other Possibilities: None. Severity: TP_SEV_WARN Message: Radio [str] on Radio-Port [mac] below threshold [uint]" ::= { wsTrapWirelessRadio 37 } -- 1.3.6.1.4.1.388.14.5.1.7.2.38 wsTrapEnableWirelessRadioDfsFreeCountBelowThreshRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for DFS free count below threshold." ::= { wsTrapWirelessRadio 38 } -- 1.3.6.1.4.1.388.14.5.1.7.2.39 wsTrapWirelessRadioDetectedApInterferenceRecover NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessRadioChannelNum, wsTrapWirelessAPMac, wsTrapWirelessInterferingMac } STATUS current DESCRIPTION "A radio interference on its channel of operation caused by another AP cleared. Solution: Remedy the interfering AP. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Detected by Radio [str] on Radio-Port [mac], Interfering AP [mac], channel [uint]" ::= { wsTrapWirelessRadio 39 } -- 1.3.6.1.4.1.388.14.5.1.7.2.40 wsTrapEnableWirelessRadioDetectedApInterferenceRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable AP interference cleared trap." ::= { wsTrapWirelessRadio 40 } -- 1.3.6.1.4.1.388.14.5.1.7.2.41 wsTrapWirelessRadioDetectedMuInterferenceRecover NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessRadioChannelNum, wsTrapWirelessAPMac, wsTrapWirelessInterferingMac } STATUS current DESCRIPTION "A radio interference on its channel of operation caused by a mobile unit cleared. Solution: Remedy the interfering mobile unit. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Detected by Radio [str] on Radio-Port [mac], Interfering MU [mac], channel [uint]" ::= { wsTrapWirelessRadio 41 } -- 1.3.6.1.4.1.388.14.5.1.7.2.42 wsTrapEnableWirelessRadioDetectedMuInterferenceRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Mobile Unit interference cleared trap." ::= { wsTrapWirelessRadio 42 } -- 1.3.6.1.4.1.388.14.5.1.7.2.43 wsTrapWirelessRadioDetectedDeviceInterference NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsCcStatsRadioIndex, wsTrapWirelessAPMac, wsCcRfLastAlarmEvent } STATUS current DESCRIPTION "A radio detected interference by other device. Solution: Remedy the interfering device. Other Possibilities: Interference. Severity: TP_SEV_WARN Message: Detected interference on radio [str] id [uint] port [mac] cause [str]" ::= { wsTrapWirelessRadio 43 } -- 1.3.6.1.4.1.388.14.5.1.7.2.44 wsTrapEnableWirelessRadioDetectedDeviceInterference OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable device interference detected trap." ::= { wsTrapWirelessRadio 44 } -- 1.3.6.1.4.1.388.14.5.1.7.2.45 wsTrapWirelessRadioDetectedDeviceInterferenceRecover NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsCcStatsRadioIndex, wsTrapWirelessAPMac } STATUS current DESCRIPTION "A radio detected interference by other device recovered. Solution: None. Other Possibilities: None. Severity: TP_SEV_WARN Message: Interference cleared on radio [str] id [uint] port [mac]" ::= { wsTrapWirelessRadio 45 } -- 1.3.6.1.4.1.388.14.5.1.7.2.46 wsTrapEnableWirelessRadioDetectedDeviceInterferenceRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable device interference cleared trap." ::= { wsTrapWirelessRadio 46 } -- 1.3.6.1.4.1.388.14.5.1.7.2.47 wsTrapWirelessRadioModuleTrouble NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsCcStatsRadioIndex, wsTrapWirelessAPMac, wsCcRfLastAlarmEvent } STATUS current DESCRIPTION "Radio module has failed. Solution: Throubleshoot radio failure. Other Possibilities: Replace the radio. Severity: TP_SEV_WARN Message: Detected failure by radio [str] id [uint] port [mac] cause [str] " ::= { wsTrapWirelessRadio 47 } -- 1.3.6.1.4.1.388.14.5.1.7.2.48 wsTrapEnableWirelessRadioModuleTrouble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for radio module failure." ::= { wsTrapWirelessRadio 48 } -- 1.3.6.1.4.1.388.14.5.1.7.2.49 wsTrapWirelessRadioModuleTroubleRecover NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsCcStatsRadioIndex, wsTrapWirelessAPMac } STATUS current DESCRIPTION "Radio module failure cleared. Solution: None. Other Possibilities: None. Severity: TP_SEV_WARN Message: Detected failure by radio [str] id [uint] port [mac] cleared" ::= { wsTrapWirelessRadio 49 } -- 1.3.6.1.4.1.388.14.5.1.7.2.50 wsTrapEnableWirelessRadioModuleTroubleRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for radio module failure cleared." ::= { wsTrapWirelessRadio 50 } -- 1.3.6.1.4.1.388.14.5.1.7.2.51 wsTrapWirelessRadioDown NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsCcStatsRadioIndex, wsTrapWirelessAPMac } STATUS current DESCRIPTION "A radio went down event. Solution: The radio was removed or reconfigured. Other Possibilities: Radio failure. Message: Radio [str] id [uint] port [mac] is down " ::= { wsTrapWirelessRadio 51 } -- 1.3.6.1.4.1.388.14.5.1.7.2.52 wsTrapEnableWirelessRadioDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for radio went down event." ::= { wsTrapWirelessRadio 52 } -- 1.3.6.1.4.1.388.14.5.1.7.2.53 wsTrapWirelessRadioDownRecover NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsCcStatsRadioIndex, wsTrapWirelessAPMac } STATUS current DESCRIPTION "A radio is up. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: Radio [str] id [uint] port [mac] is up " ::= { wsTrapWirelessRadio 53 } -- 1.3.6.1.4.1.388.14.5.1.7.2.54 wsTrapEnableWirelessRadioDownRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for radio up again." ::= { wsTrapWirelessRadio 54 } -- 1.3.6.1.4.1.388.14.5.1.7.3 wsTrapWirelessUnapprovedAP OBJECT IDENTIFIER ::= { wsTrapWireless 3 } -- 1.3.6.1.4.1.388.14.5.1.7.3.1 wsTrapWirelessUnapprovedAPDetected NOTIFICATION-TYPE OBJECTS { wsCcRfRapStatusMac, wsCcRfRapStatusHeardAp } STATUS current DESCRIPTION "An external, unapproved AP was detected in the vicinity of your wlan. Solution: Add the unapproved AP to the approved list or remove the unapproved AP. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: AP [mac], Radio [uint] " ::= { wsTrapWirelessUnapprovedAP 1 } -- 1.3.6.1.4.1.388.14.5.1.7.3.2 wsTrapEnableWirelessUnapprovedAPDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessUnapprovedAP 2 } -- 1.3.6.1.4.1.388.14.5.1.7.3.3 wsTrapEnableAllWirelessUnapprovedAPTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessUnapprovedAP 3 } -- 1.3.6.1.4.1.388.14.5.1.7.3.4 wsTrapDisableAllWirelessUnapprovedAPTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessUnapprovedAP 4 } -- 1.3.6.1.4.1.388.14.5.1.7.3.5 wsTrapWirelessUnapprovedAPRemoved NOTIFICATION-TYPE OBJECTS { wsCcRfRapStatusMac, wsCcRfRapStatusHeardAp } STATUS current DESCRIPTION "An external, unapproved AP was removed Solution: The unapproved AP was added to the approved list or removed Other Possibilities: None. Severity: TP_SEV_MAJOR Message: AP [mac], Radio [uint] " ::= { wsTrapWirelessUnapprovedAP 5 } -- 1.3.6.1.4.1.388.14.5.1.7.3.6 wsTrapEnableWirelessUnapprovedAPRemoved OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable wireless unapproved Ap removed trap" ::= { wsTrapWirelessUnapprovedAP 6 } -- 1.3.6.1.4.1.388.14.5.1.7.3.7 wsTrapSmtpNotifyWirelessUnapprovedAPTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless Unapproved AP traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessUnapprovedAP 7 } -- 1.3.6.1.4.1.388.14.5.1.7.3.8 wsTrapWirelessIgnoredAPDetected NOTIFICATION-TYPE OBJECTS { wsCcRfRapStatusMac, wsCcRfRapStatusHeardAp } STATUS current DESCRIPTION "This trap is sent whenever the system detects a beacon from an ignored AP. An ignored AP is usually not a rogue. Solution: None. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: AP [mac], Radio [uint]" ::= { wsTrapWirelessUnapprovedAP 8 } -- 1.3.6.1.4.1.388.14.5.1.7.3.9 wsTrapEnableWirelessIgnoredAPDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable sending the trap wsTrapWirelessIgnoredAPDetected" ::= { wsTrapWirelessUnapprovedAP 9 } -- 1.3.6.1.4.1.388.14.5.1.7.4 wsTrapWirelessSelfHeal OBJECT IDENTIFIER ::= { wsTrapWireless 4 } -- 1.3.6.1.4.1.388.14.5.1.7.4.1 wsTrapWirelessSelfHealActivate NOTIFICATION-TYPE STATUS current DESCRIPTION "This radio is attempting to cover for a neighboring AP that is down. Solution: 1. Verify that the neighboring AP is still adopted. 2. Verify that there are no physical obstructions between the down AP and other APs. Other Possibilities: 1. The neighboring AP may have a physical obstruction or has become unadopted. 2. Mis-configuration. Set the healing AP and the down AP to not be neighbors. Message: Activated " ::= { wsTrapWirelessSelfHeal 1 } -- 1.3.6.1.4.1.388.14.5.1.7.4.2 wsTrapEnableWirelessSelfHealActivate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessSelfHeal 2 } -- 1.3.6.1.4.1.388.14.5.1.7.4.3 wsTrapEnableAllWirelessSelfHealTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessSelfHeal 3 } -- 1.3.6.1.4.1.388.14.5.1.7.4.4 wsTrapDisableAllWirelessSelfHealTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessSelfHeal 4 } -- 1.3.6.1.4.1.388.14.5.1.7.4.5 wsTrapSmtpNotifyWirelessSelfHealTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless Self Healing traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessSelfHeal 5 } -- 1.3.6.1.4.1.388.14.5.1.7.5 wsTrapWirelessIds OBJECT IDENTIFIER ::= { wsTrapWireless 5 } -- 1.3.6.1.4.1.388.14.5.1.7.5.1 wsTrapWirelessIdsMuEvent NOTIFICATION-TYPE OBJECTS { wsCcRfIdsViolationType, wsTrapWirelessStationMac, wsCcRfIdsViolCountLastDetWindow, wsCcRfIdsRadioIndex } STATUS current DESCRIPTION "The number of requests from the MU has exceeded the configured threshold for the violation type. The MU is being filtered for the configured number of seconds. Solution: This may be indicative of an attack on your wireless LAN. If the MU is one of your own, it may be experiencing problems. Other Possibilities: The threshold may be set too low, make it higher. Severity: TP_SEV_WARN " ::= { wsTrapWirelessIds 1 } -- 1.3.6.1.4.1.388.14.5.1.7.5.2 wsTrapEnableWirelessIdsMuEvent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessIds 2 } -- 1.3.6.1.4.1.388.14.5.1.7.5.3 wsTrapWirelessIdsRadioEvent NOTIFICATION-TYPE OBJECTS { wsCcRfIdsViolationType, wsCcRfIdsViolCountLastDetWindow, wsCcRfIdsRadioIndex } STATUS current DESCRIPTION "The number of requests from the radio has exceeded the configured threshold for the violation type. The radio is being filtered for the configured number of seconds. Solution: This may be indicative of an attack on your wireless LAN. If the radio is one of your own, it may be experiencing problems. Other Possibilities: The threshold may be set too low, make it higher. Severity: TP_SEV_WARN " ::= { wsTrapWirelessIds 3 } -- 1.3.6.1.4.1.388.14.5.1.7.5.4 wsTrapEnableWirelessIdsRadioEvent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessIds 4 } -- 1.3.6.1.4.1.388.14.5.1.7.5.5 wsTrapWirelessIdsSwitchEvent NOTIFICATION-TYPE OBJECTS { wsCcRfIdsViolationType, wsCcRfIdsViolCountLastDetWindow } STATUS current DESCRIPTION "The number of requests from the switch has exceeded the configured threshold for the violation type. The switch is being filtered for the configured number of seconds. Solution: This may be indicative of an attack on your wireless LAN. If the switch is one of your own, it may be experiencing problems. Other Possibilities: The threshold may be set too low, make it higher. Severity: TP_SEV_WARN " ::= { wsTrapWirelessIds 5 } -- 1.3.6.1.4.1.388.14.5.1.7.5.6 wsTrapEnableWirelessIdsSwitchEvent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessIds 6 } -- 1.3.6.1.4.1.388.14.5.1.7.5.7 wsTrapEnableAllWirelessIdsTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { wsTrapWirelessIds 7 } -- 1.3.6.1.4.1.388.14.5.1.7.5.8 wsTrapDisableAllWirelessIdsTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessIds 8 } -- 1.3.6.1.4.1.388.14.5.1.7.5.9 wsTrapSmtpNotifyWirelessIdsTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless IDS traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessIds 9 } -- 1.3.6.1.4.1.388.14.5.1.7.5.10 wsTrapWirelessIdsSsid OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Unauthorized SSID discovered by radio." ::= { wsTrapWirelessIds 10 } -- 1.3.6.1.4.1.388.14.5.1.7.5.11 wsTrapWirelessIdsUnauthorizedSsid NOTIFICATION-TYPE OBJECTS { wsTrapWirelessRadioName, wsTrapWirelessAPMac, wsTrapWirelessIdsSsid } STATUS current DESCRIPTION "An unauthorized SSID was detected in the vicinity of your wlan. Solution: Add the SSID to the approved list or remove the SSID. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: Radio [str] on AP [mac] detected unauthorized SSID [str] " ::= { wsTrapWirelessIds 11 } -- 1.3.6.1.4.1.388.14.5.1.7.5.12 wsTrapEnableWirelessIdsUnauthorizedSsid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessIds 12 } -- 1.3.6.1.4.1.388.14.5.1.7.6 wsTrapWirelessStat OBJECT IDENTIFIER ::= { wsTrapWireless 6 } -- 1.3.6.1.4.1.388.14.5.1.7.6.1 wsTrapWirelessStatWlanName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessStat 1 } -- 1.3.6.1.4.1.388.14.5.1.7.6.2 wsTrapWirelessStatMuIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessStat 2 } -- 1.3.6.1.4.1.388.14.5.1.7.6.3 wsTrapWirelessStatPortalMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "To be added." ::= { wsTrapWirelessStat 3 } -- 1.3.6.1.4.1.388.14.5.1.7.6.4 wsTrapWirelessStatStation NOTIFICATION-TYPE OBJECTS { wsCcStatsTrapCtrlConfIndex, wsTrapWirelessStatMuIPAddr, wsCcStatsMuMac, wsCcStatsTrapCtrlConfUnits, wsCcStatsTrapCtrlConfThresholdMus } STATUS current DESCRIPTION "This trap is generated when the user set values are violated for the station. Solution: Check the stations for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: Threshold [str], value [str] [str], Station [mac], Station [ip] " ::= { wsTrapWirelessStat 4 } -- 1.3.6.1.4.1.388.14.5.1.7.6.6 wsTrapWirelessStatRadio NOTIFICATION-TYPE OBJECTS { wsCcStatsTrapCtrlConfThresholdPortals, wsCcStatsTrapCtrlConfUnits, wsCcStatsTrapCtrlConfIndex, wsCcStatsRadioIndex } STATUS current DESCRIPTION "This trap is generated when the user set values are violated for the radio. Solution: Check the stations for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: Threshold [str], value [str] [str], Radio index [str] " ::= { wsTrapWirelessStat 6 } -- 1.3.6.1.4.1.388.14.5.1.7.6.8 wsTrapWirelessStatWlan NOTIFICATION-TYPE OBJECTS { wsCcStatsTrapCtrlConfIndex, wsCcStatsTrapCtrlConfUnits, wsCcStatsTrapCtrlConfThresholdWlans, wsTrapWirelessStatWlanName } STATUS current DESCRIPTION "This trap is generated when the user set values are violated for the wlan. Solution: Check the wlan for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: Threshold [str], value [str] [str], WLAN index [str] " ::= { wsTrapWirelessStat 8 } -- 1.3.6.1.4.1.388.14.5.1.7.6.10 wsTrapWirelessStatModule NOTIFICATION-TYPE OBJECTS { wsCcStatsTrapCtrlConfIndex, wsCcStatsTrapCtrlConfThresholdSwitch, wsCcStatsTrapCtrlConfUnits } STATUS current DESCRIPTION "This trap is generated when the user set values are violated for the wlan-module. Solution: Check the wlan-module for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: Threshold [str], value [str] [str] " ::= { wsTrapWirelessStat 10 } -- 1.3.6.1.4.1.388.14.5.1.7.6.11 wsTrapSmtpNotifyWirelessStatModule OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless Statistics traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessStat 11 } -- 1.3.6.1.4.1.388.14.5.1.7.7 wsTrapEnableAllWirelessTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWireless 7 } -- 1.3.6.1.4.1.388.14.5.1.7.8 wsTrapDisableAllWirelessTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapWireless 8 } -- 1.3.6.1.4.1.388.14.5.1.7.9 wsTrapWirelessWlan OBJECT IDENTIFIER ::= { wsTrapWireless 9 } -- 1.3.6.1.4.1.388.14.5.1.7.9.1 wsTrapWirelessWlanVlanUserLimitReached NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsCcRfWlanVlanIndex, wsCcRfWlanVlanUserLimit } STATUS current DESCRIPTION "The limit on the number of users on the specified VLAN of the specified WLAN has been reached. Future association will not be assigned to this VLAN. Solution: Increase the limit on the number of users for that VLAN/WLAN. Other Possibilities: Assign more VLANs to that WLAN. Message: wlan [uint], vlan [uint] reached user limit [uint] " ::= { wsTrapWirelessWlan 1 } -- 1.3.6.1.4.1.388.14.5.1.7.9.2 wsTrapEnableWirelessWlanVlanUserLimit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the WLAN VLAN User Limit Reached Trap." ::= { wsTrapWirelessWlan 2 } -- 1.3.6.1.4.1.388.14.5.1.7.9.3 wsTrapWirelessWlanWebPortalUnreachable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsCcRfHotspotExtPageUrl } STATUS current DESCRIPTION "Web-Portal server can not be reached from this device. Solution: Configure the route on this device and route configuration on intermediate routers so that web-portal is reachable from this device. Check to make sure the web-portal server is powered on. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: WLAN index [int], Hotspot page URL [str] " ::= { wsTrapWirelessWlan 3 } -- 1.3.6.1.4.1.388.14.5.1.7.9.4 wsTrapEnableWirelessWlanWebPortalUnreachable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable web-portal server unreachable trap." ::= { wsTrapWirelessWlan 4 } -- 1.3.6.1.4.1.388.14.5.1.7.9.5 wsTrapWirelessWlanWebPortalUnavailable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsCcRfHotspotExtPageUrl } STATUS current DESCRIPTION "Web-Portal server is not available to provide web-server service. Solution: Start web-portal server service. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: WLAN index [int], Hotspot page URL [str] " ::= { wsTrapWirelessWlan 5 } -- 1.3.6.1.4.1.388.14.5.1.7.9.6 wsTrapEnableWirelessWlanWebPortalUnavailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable web-portal server unavailable trap." ::= { wsTrapWirelessWlan 6 } -- 1.3.6.1.4.1.388.14.5.1.7.9.7 wsTrapWirelessWlanWebPortalUnconnected NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsCcRfHotspotExtPageUrl } STATUS current DESCRIPTION "Web-Portal server is down from service. Solution: Re-start the web-portal service. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: WLAN index [int], Hotspot page URL [str] " ::= { wsTrapWirelessWlan 7 } -- 1.3.6.1.4.1.388.14.5.1.7.9.8 wsTrapEnableWirelessWlanWebPortalUnconnected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable web-portal server unconnected trap." ::= { wsTrapWirelessWlan 8 } -- 1.3.6.1.4.1.388.14.5.1.7.9.9 wsTrapEnableAllWirelessWlanTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Enable all Wireless Wlan traps." ::= { wsTrapWirelessWlan 9 } -- 1.3.6.1.4.1.388.14.5.1.7.9.10 wsTrapDisableAllWirelessWlanTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Disable all Wireless Wlan traps." ::= { wsTrapWirelessWlan 10 } -- 1.3.6.1.4.1.388.14.5.1.7.9.11 wsTrapSmtpNotifyWirelessWlanTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless WLAN traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessWlan 11 } -- 1.3.6.1.4.1.388.14.5.1.7.9.12 wsTrapWirelessWlanWebPortalAvailable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsCcRfHotspotExtPageUrl } STATUS current DESCRIPTION "Web-Portal server is up to provide service after it went down. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: WLAN index [int], Hotspot page URL [str]" ::= { wsTrapWirelessWlan 12 } -- 1.3.6.1.4.1.388.14.5.1.7.9.13 wsTrapEnableWirelessWlanWebPortalAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable web-portal server available trap." ::= { wsTrapWirelessWlan 13 } -- 1.3.6.1.4.1.388.14.5.1.7.9.14 wsTrapWirelessWlanRadiusAuthServIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of RADIUS authentication server." ::= { wsTrapWirelessWlan 14 } -- 1.3.6.1.4.1.388.14.5.1.7.9.15 wsTrapWirelessWlanRadiusAuthServUnavailable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsTrapWirelessWlanRadiusAuthServIpAddr } STATUS current DESCRIPTION "RADIUS authentication server is not available to provide service. Solution: Configure the route on this device and route configuration on intermediate routers so that RADIUS server is reachable from this device. Check to make sure the RADIUS server is powered on. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: WLAN index [int], RADIUS authentication server [ip]" ::= { wsTrapWirelessWlan 15 } -- 1.3.6.1.4.1.388.14.5.1.7.9.16 wsTrapEnableWirelessWlanRadiusAuthServUnavailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable RADIUS authentication server unavailable trap." ::= { wsTrapWirelessWlan 16 } -- 1.3.6.1.4.1.388.14.5.1.7.9.17 wsTrapWirelessWlanRadiusAuthServAvailable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsTrapWirelessWlanRadiusAuthServIpAddr } STATUS current DESCRIPTION "RADIUS authentication server is up to provide service after it went down. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: WLAN index [int], RADIUS authentication server [ip]" ::= { wsTrapWirelessWlan 17 } -- 1.3.6.1.4.1.388.14.5.1.7.9.18 wsTrapEnableWirelessWlanRadiusAuthServAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable RADIUS authentication server available trap." ::= { wsTrapWirelessWlan 18 } -- 1.3.6.1.4.1.388.14.5.1.7.9.19 wsTrapWirelessWlanRadiusAccServIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of RADIUS accounting server." ::= { wsTrapWirelessWlan 19 } -- 1.3.6.1.4.1.388.14.5.1.7.9.20 wsTrapWirelessWlanRadiusAccServUnavailable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsTrapWirelessWlanRadiusAccServIpAddr } STATUS current DESCRIPTION "RADIUS accounting server is not available to provide service. Solution: Configure the route on this device and route configuration on intermediate routers so that RADIUS server is reachable from this device. Check to make sure the RADIUS server is powered on. Other Possibilities: None. Severity: TP_SEV_MAJOR Message: WLAN index [int], RADIUS accounting server [ip]" ::= { wsTrapWirelessWlan 20 } -- 1.3.6.1.4.1.388.14.5.1.7.9.21 wsTrapEnableWirelessWlanRadiusAccServUnavailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable RADIUS accounting server unavailable trap." ::= { wsTrapWirelessWlan 21 } -- 1.3.6.1.4.1.388.14.5.1.7.9.22 wsTrapWirelessWlanRadiusAccServAvailable NOTIFICATION-TYPE OBJECTS { wsCcRfWlanIndex, wsTrapWirelessWlanRadiusAccServIpAddr } STATUS current DESCRIPTION "RADIUS accounting server is up to provide service after it went down. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: WLAN index [int], RADIUS accounting server [ip]" ::= { wsTrapWirelessWlan 22 } -- 1.3.6.1.4.1.388.14.5.1.7.9.23 wsTrapEnableWirelessWlanRadiusAccServAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable RADIUS accounting server available trap." ::= { wsTrapWirelessWlan 23 } -- 1.3.6.1.4.1.388.14.5.1.7.10 wsTrapWirelessAp OBJECT IDENTIFIER ::= { wsTrapWireless 10 } -- 1.3.6.1.4.1.388.14.5.1.7.10.1 wsTrapEnableAllWirelessApTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Enable all wireless Ap traps." ::= { wsTrapWirelessAp 1 } -- 1.3.6.1.4.1.388.14.5.1.7.10.2 wsTrapDisableAllWirelessApTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Disable all wireless Ap traps." ::= { wsTrapWirelessAp 2 } -- 1.3.6.1.4.1.388.14.5.1.7.10.3 wsTrapSmtpNotifyWirelessApTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Wireless Ap traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapWirelessAp 3 } -- 1.3.6.1.4.1.388.14.5.1.7.10.4 wsTrapWirelessApCpuUsageTooHigh NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac, wsCcRfApResStatusCpuLoad, wsCcRfApExtCpuUsageThresh } STATUS current DESCRIPTION "This trap is generated when the CPU usage is too high for the Ap. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac] CPU [uint] Limit [uint] " ::= { wsTrapWirelessAp 4 } -- 1.3.6.1.4.1.388.14.5.1.7.10.5 wsTrapEnableWirelessApCpuUsageTooHigh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable CPU usage is too high for the Ap trap." ::= { wsTrapWirelessAp 5 } -- 1.3.6.1.4.1.388.14.5.1.7.10.6 wsTrapWirelessApCpuUsageTooHighRecover NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac, wsCcRfApResStatusCpuLoad, wsCcRfApExtCpuUsageThresh } STATUS current DESCRIPTION "This trap is generated when the CPU usage is normal for the Ap. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac] CPU [uint] Limit [uint] " ::= { wsTrapWirelessAp 6 } -- 1.3.6.1.4.1.388.14.5.1.7.10.7 wsTrapEnableWirelessApCpuUsageTooHighRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable CPU usage back to normal for the Ap trap. " ::= { wsTrapWirelessAp 7 } -- 1.3.6.1.4.1.388.14.5.1.7.10.8 wsTrapWirelessApMemUsageTooHigh NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac, wsCcRfApResStatusMemoryFree, wsCcRfApExtMemoryUsageThresh } STATUS current DESCRIPTION "This trap is generated when memory usage is too high for the Ap. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac] CPU [uint] Limit [uint] " ::= { wsTrapWirelessAp 8 } -- 1.3.6.1.4.1.388.14.5.1.7.10.9 wsTrapEnableWirelessApMemUsageTooHigh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable memory usage is too high for the Ap trap." ::= { wsTrapWirelessAp 9 } -- 1.3.6.1.4.1.388.14.5.1.7.10.10 wsTrapWirelessApMemUsageTooHighRecover NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac, wsCcRfApResStatusMemoryFree, wsCcRfApExtMemoryUsageThresh } STATUS current DESCRIPTION "This trap is generated when memory usage is normal for the Ap. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac] CPU [uint] Limit [uint] " ::= { wsTrapWirelessAp 10 } -- 1.3.6.1.4.1.388.14.5.1.7.10.11 wsTrapEnableWirelessApMemUsageTooHighRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable memory usage is back to normal for the Ap trap." ::= { wsTrapWirelessAp 11 } -- 1.3.6.1.4.1.388.14.5.1.7.10.12 wsTrapWirelessApMonitorModeChanged NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac, wsCcRfApExtMonitorMode } STATUS current DESCRIPTION "This trap is generated when monitoring mode changes. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac] mode [int] " ::= { wsTrapWirelessAp 12 } -- 1.3.6.1.4.1.388.14.5.1.7.10.13 wsTrapEnableWirelessApMonitorModeChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable monitoring mode changes trap." ::= { wsTrapWirelessAp 13 } -- 1.3.6.1.4.1.388.14.5.1.7.10.14 wsTrapWirelessApSwUpdateFail NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac } STATUS current DESCRIPTION "This trap is generated when AP gets software upgrade failure. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac]. " ::= { wsTrapWirelessAp 14 } -- 1.3.6.1.4.1.388.14.5.1.7.10.15 wsTrapEnableWirelessApSwUpdateFail OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable AP software upgrade failure trap." ::= { wsTrapWirelessAp 15 } -- 1.3.6.1.4.1.388.14.5.1.7.10.16 wsTrapWirelessApSsidKeyConflict NOTIFICATION-TYPE OBJECTS { wsCcRfApExtApMac, wsCcRfWlanIndex } STATUS current DESCRIPTION "This trap is generated when two SSID is set to the same key on the AP. Solution: Check Ap for proper operation. Other Possibilities: None. Severity: TP_SEV_WARN Message: AP [mac] SSID [int] " ::= { wsTrapWirelessAp 16 } -- 1.3.6.1.4.1.388.14.5.1.7.10.17 wsTrapEnableWirelessApSsidKeyConflict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable same SSID same key on the same Ap trap." ::= { wsTrapWirelessAp 17 } -- 1.3.6.1.4.1.388.14.5.1.8 wsTrapMobility OBJECT IDENTIFIER ::= { wsTrapMIB 8 } -- 1.3.6.1.4.1.388.14.5.1.8.1 wsTrapMobilityOperUp NOTIFICATION-TYPE STATUS current DESCRIPTION "Mobility is operationally UP. Solution: None Other Possibilities: None. " ::= { wsTrapMobility 1 } -- 1.3.6.1.4.1.388.14.5.1.8.2 wsTrapEnableMobilityOperUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapMobility 2 } -- 1.3.6.1.4.1.388.14.5.1.8.3 wsTrapMobilityOperDown NOTIFICATION-TYPE STATUS current DESCRIPTION "Mobility is operationally DOWN. Solution: None Other Possibilities: None. " ::= { wsTrapMobility 3 } -- 1.3.6.1.4.1.388.14.5.1.8.4 wsTrapEnableMobilityOperDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapMobility 4 } -- 1.3.6.1.4.1.388.14.5.1.8.5 wsTrapMobilityPeerUp NOTIFICATION-TYPE OBJECTS { wsSwMobilityPeerIp } STATUS current DESCRIPTION "Mobility Peer is UP. Solution: None Other Possibilities: None. Message: Peer: [ip] " ::= { wsTrapMobility 5 } -- 1.3.6.1.4.1.388.14.5.1.8.6 wsTrapEnableMobilityPeerUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapMobility 6 } -- 1.3.6.1.4.1.388.14.5.1.8.7 wsTrapMobilityPeerDown NOTIFICATION-TYPE OBJECTS { wsSwMobilityPeerIp } STATUS current DESCRIPTION "Mobility Peer is DOWN. Solution: Check IP connectivity with Peer IP-address. Other Possibilities: None. Message: Peer: [ip] " ::= { wsTrapMobility 7 } -- 1.3.6.1.4.1.388.14.5.1.8.8 wsTrapEnableMobilityPeerDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapMobility 8 } -- 1.3.6.1.4.1.388.14.5.1.8.9 wsTrapEnableAllMobilityTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapMobility 9 } -- 1.3.6.1.4.1.388.14.5.1.8.10 wsTrapDisableAllMobilityTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsTrapMobility 10 } -- 1.3.6.1.4.1.388.14.5.1.8.11 wsTrapSmtpNotifyMobilityTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Mobility traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsTrapMobility 11 } -- 1.3.6.1.4.1.388.14.5.1.9 wsSwTrapDHCPServer OBJECT IDENTIFIER ::= { wsTrapMIB 9 } -- 1.3.6.1.4.1.388.14.5.1.9.1 wsTrapDHCPServerStarted NOTIFICATION-TYPE STATUS current DESCRIPTION "DHCP Server is UP. Solution: None Other Possibilities: None. Message: Started " ::= { wsSwTrapDHCPServer 1 } -- 1.3.6.1.4.1.388.14.5.1.9.2 wsTrapEnableDHCPServerStarted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapDHCPServer 2 } -- 1.3.6.1.4.1.388.14.5.1.9.3 wsTrapDHCPServerStopped NOTIFICATION-TYPE STATUS current DESCRIPTION "DHCP Server is Down. Solution: None Other Possibilities: None. Message: Stopped " ::= { wsSwTrapDHCPServer 3 } -- 1.3.6.1.4.1.388.14.5.1.9.4 wsTrapEnableDHCPServerStopped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapDHCPServer 4 } -- 1.3.6.1.4.1.388.14.5.1.9.5 wsTrapEnableAllDHCPServerTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapDHCPServer 5 } -- 1.3.6.1.4.1.388.14.5.1.9.6 wsTrapDisableAllDHCPServerTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapDHCPServer 6 } -- 1.3.6.1.4.1.388.14.5.1.9.7 wsTrapSmtpNotifyDHCPServerTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of DHCP Server traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsSwTrapDHCPServer 7 } -- 1.3.6.1.4.1.388.14.5.1.9.8 wsTrapDHCPServerPool OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The DHCP server pool name." ::= { wsSwTrapDHCPServer 8 } -- 1.3.6.1.4.1.388.14.5.1.9.9 wsTrapDHCPServerAddressExhaust NOTIFICATION-TYPE OBJECTS { wsTrapDHCPServerPool } STATUS current DESCRIPTION "No addresses available for serving. Solution: Make more addresses available for serving. Other Possibilities: None. Severity: TP_SEV_WARN Message: Address exhausted in pool [str]" ::= { wsSwTrapDHCPServer 9 } -- 1.3.6.1.4.1.388.14.5.1.9.10 wsTrapEnableDHCPServerAddressExhaust OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for address exhaustion." ::= { wsSwTrapDHCPServer 10 } -- 1.3.6.1.4.1.388.14.5.1.9.11 wsTrapDHCPServerAddressExhaustRecover NOTIFICATION-TYPE OBJECTS { wsTrapDHCPServerPool } STATUS current DESCRIPTION "Free addresses available for serving. This event is raised when free addresses become available after address exhaustion. Solution: None. Other Possibilities: None. Severity: TP_SEV_NORM Message: Address available in pool [str]" ::= { wsSwTrapDHCPServer 11 } -- 1.3.6.1.4.1.388.14.5.1.9.12 wsTrapEnableDHCPServerAddressExhaustRecover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable trap for address availability after exhaustion." ::= { wsSwTrapDHCPServer 12 } -- 1.3.6.1.4.1.388.14.5.1.10 wsSwTrapRadiusServer OBJECT IDENTIFIER ::= { wsTrapMIB 10 } -- 1.3.6.1.4.1.388.14.5.1.10.1 wsTrapRadiusServerStarted NOTIFICATION-TYPE STATUS current DESCRIPTION "Radius Server is UP. Solution: None Other Possibilities: None. Message: Started " ::= { wsSwTrapRadiusServer 1 } -- 1.3.6.1.4.1.388.14.5.1.10.2 wsTrapEnableRadiusServerStarted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapRadiusServer 2 } -- 1.3.6.1.4.1.388.14.5.1.10.3 wsTrapRadiusServerStopped NOTIFICATION-TYPE STATUS current DESCRIPTION "Radius Server is Down. Solution: None Other Possibilities: None. Message: Stopped " ::= { wsSwTrapRadiusServer 3 } -- 1.3.6.1.4.1.388.14.5.1.10.4 wsTrapEnableRadiusServerStopped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapRadiusServer 4 } -- 1.3.6.1.4.1.388.14.5.1.10.5 wsTrapEnableAllRadiusServerTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapRadiusServer 5 } -- 1.3.6.1.4.1.388.14.5.1.10.6 wsTrapDisableAllRadiusServerTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "To be added." ::= { wsSwTrapRadiusServer 6 } -- 1.3.6.1.4.1.388.14.5.1.10.7 wsTrapSmtpNotifyRadiusServerTrap OBJECT-TYPE SYNTAX SmtpNotifyBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable e-mail notification of Radius Server traps. Please see the definition of SmtpNotifyBitMap for the usage of this field." ::= { wsSwTrapRadiusServer 7 } -- 1.3.6.1.4.1.388.14.5.1.11 wsTrapEnableAllTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Enables trap flags for all the traps applicable to the system." ::= { wsTrapMIB 11 } -- 1.3.6.1.4.1.388.14.5.1.12 wsTrapDisableAllTrap OBJECT-TYPE SYNTAX DoActionNow MAX-ACCESS read-write STATUS current DESCRIPTION "Disables trap flags for all the traps applicable to the system." ::= { wsTrapMIB 12 } -- 1.3.6.1.4.1.388.14.5.1.13 wsTrapGlobalEnableFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is a global variable which determines whether to send (or not) any of the system trap. When this flag is set to 'true', all the traps which are enabled and have their trap condition met are sent out. When this flag is set to 'false', no trap is sent out even if its own flag is enabled." ::= { wsTrapMIB 13 } -- 1.3.6.1.4.1.388.14.5.100 wsTrapConformance OBJECT IDENTIFIER ::= { wsTrap 100 } -- 1.3.6.1.4.1.388.14.5.100.1 wsTrapCompliances OBJECT IDENTIFIER ::= { wsTrapConformance 1 } -- 1.3.6.1.4.1.388.14.5.100.1.1 -- this module -- 1.3.6.1.4.1.388.14.5.100.1.1 wsTrapCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { wsTrapGroup } ::= { wsTrapCompliances 1 } -- 1.3.6.1.4.1.388.14.5.100.2 wsNotificationGroups OBJECT IDENTIFIER ::= { wsTrapConformance 2 } -- 1.3.6.1.4.1.388.14.5.100.2.1 wsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { wsTrapWirelessStationAssociated, wsTrapWirelessStationDisassociated, wsTrapWirelessStationDeniedAssociationOnCapability, wsTrapWirelessStationDeniedAssociationOnShortPreamble, wsTrapWirelessStationDeniedAssociationOnSpectrum, wsTrapWirelessStationDeniedAssociationOnErr, wsTrapWirelessStationDeniedAssociationOnSSID, wsTrapWirelessStationDeniedAssociationOnRates, wsTrapWirelessStationDeniedAssociationOnInvalidWPA, wsTrapWirelessStationDeniedAssociationAsPortCapacityReached, wsTrapWirelessStationTkipCounterMeasures, wsTrapWirelessStationDeniedAuthentication, wsTrapWirelessStationRadiusAuthFailed, wsTrapWirelessStatStation, wsTrapWirelessStatRadio, wsTrapWirelessStatWlan, wsTrapWirelessStatModule, wsTrapWirelessRadioAdopted, wsTrapWirelessRadioUnadopted, wsTrapWirelessRadioDetectedRadar, wsTrapWirelessSelfHealActivate, wsTrapSnmpColdStart, wsTrapSnmpAuthenticationFail, wsTrapSnmpLinkUp, wsTrapSnmpLinkDown, wsTrapClusterMemberUp, wsTrapClusterMemberDown, wsTrapClusterMemberMisConfigured, wsTrapClusterAdoptionExceeded, wsTrapClusterLicenseChanged, wsTrapMiscSavedConfigModified, wsTrapMobilityOperUp, wsTrapMobilityOperDown, wsTrapMobilityPeerUp, wsTrapMobilityPeerDown, wsTrapDHCPServerStopped, wsTrapDHCPServerStarted, wsTrapRadiusServerStopped, wsTrapRadiusServerStarted, wsTrapWirelessIdsMuEvent, wsTrapWirelessIdsRadioEvent, wsTrapWirelessIdsSwitchEvent, wsTrapWirelessUnapprovedAPDetected, wsTrapMiscCaCertExpired, wsTrapWirelessUnapprovedAPRemoved, wsTrapDiagTempHigh, wsTrapDiagTempOver, wsTrapDiagFanSpeedLow, wsTrapDiagRamFree, wsTrapDiagProcMemUsage, wsTrapDiagPktBuf, wsTrapDiagIpRouteCache, wsTrapDiagFileDesc, wsTrapMiscLowFileSystemSpace, wsTrapNsmDhcpIPChanged, wsTrapMiscProcessMaxRestartsReached, wsTrapWirelessWlanVlanUserLimitReached, wsTrapWirelessStationVlanChanged, wsTrapMiscPeriodicHeartbeat, wsTrapMiscSwitchEvent, wsTrapWirelessWlanWebPortalUnreachable, wsTrapWirelessWlanWebPortalUnavailable, wsTrapWirelessWlanWebPortalUnconnected, wsTrapCriticalResourceDown, wsTrapCriticalResourceUp, wsTrapWirelessIgnoredAPDetected, wsTrapNsmApIPChanged, wsTrapWirelessRadioFlashWriteError, wsTrapWirelessRadioDetectedApInterference, wsTrapWirelessRadioDetectedMuInterference, wsTrapWirelessRadioInvalidCertAttack, wsTrapWirelessRadioStationRepetitiveAttack, wsTrapWirelessRadioTamperAttack, wsTrapWirelessRadioLowSafeLevelAttack, wsTrapWirelessRadioAddressRedirectionAttack, wsTrapMiscServerCertExpired, wsTrapDiagResCpuLoad1Min, wsTrapDiagResCpuLoad5Min, wsTrapDiagResCpuLoad15Min, wsTrapWirelessRadioApSwitchTimeSyncFailure, wsTrapWirelessApMemUsageTooHighRecover, wsTrapWirelessApMemUsageTooHigh, wsTrapWirelessApCpuUsageTooHighRecover, wsTrapWirelessApCpuUsageTooHigh, wsTrapDiagConfigError, wsTrapDiagUsedKernBuff, wsTrapNsmSwitchIPChanged, wsTrapWirelessRadioDfsFreeCountBelowThresh, wsTrapWirelessApSsidKeyConflict, wsTrapWirelessApSwUpdateFail, wsTrapWirelessApMonitorModeChanged, wsTrapWirelessRadioDfsFreeCountBelowThreshRecover, wsTrapDiagMemUsageTooHighRecover, wsTrapDiagMemUsageTooHigh, wsTrapWirelessWlanWebPortalAvailable, wsTrapWirelessWlanRadiusAuthServUnavailable, wsTrapWirelessWlanRadiusAuthServAvailable, wsTrapWirelessWlanRadiusAccServUnavailable, wsTrapWirelessWlanRadiusAccServAvailable, wsTrapDHCPServerAddressExhaust, wsTrapDHCPServerAddressExhaustRecover, wsTrapSnmpWarmStart, wsTrapWirelessRadioDetectedMuInterferenceRecover, wsTrapWirelessRadioDetectedApInterferenceRecover, wsTrapWirelessIdsUnauthorizedSsid, wsTrapDiagTempTooHighRecover, wsTrapWirelessRadioDownRecover, wsTrapWirelessRadioDown, wsTrapWirelessRadioModuleTroubleRecover, wsTrapWirelessRadioModuleTrouble, wsTrapWirelessRadioDetectedDeviceInterferenceRecover, wsTrapWirelessRadioDetectedDeviceInterference, wsTrapDiagCpuUsageTooHighRecover, wsTrapDiagCpuUsageTooHigh } STATUS current DESCRIPTION "Description." ::= { wsNotificationGroups 1 } -- 1.3.6.1.4.1.388.14.5.100.3 wsTrapGroups OBJECT IDENTIFIER ::= { wsTrapConformance 3 } -- 1.3.6.1.4.1.388.14.5.100.3.2 wsTrapGroup OBJECT-GROUP OBJECTS { wsTrapWirelessStationMac, wsTrapWirelessStationRadioNum, wsTrapWirelessStationLimitOnRadio, wsTrapWirelessRadioName, wsTrapWirelessRadioChannelNum, wsTrapEnableAllWirelessStationTrap, wsTrapEnableAllWirelessIdsTrap, wsTrapEnableAllWirelessRadioTrap, wsTrapEnableAllWirelessSelfHealTrap, wsTrapEnableAllWirelessTrap, wsTrapEnableSnmpLinkUp, wsTrapEnableSnmpLinkDown, wsTrapEnableAllSnmpTrap, wsTrapEnableClusterMemberUp, wsTrapEnableClusterMemberDown, wsTrapEnableClusterMemberMisConfig, wsTrapEnableClusterAdoptionExceeded, wsTrapEnableClusterLicChanged, wsTrapEnableNsmDhcpIPChanged, wsTrapEnableMiscProcMaxRestart, wsTrapEnableSnmpColdStart, wsTrapEnableSnmpAuthFail, wsTrapEnableWirelessStationAssoc, wsTrapEnableWirelessStationDisAssoc, wsTrapEnableWirelessStationDenAssocOnCap, wsTrapEnableWirelessStationDenAssocOnShortPmbl, wsTrapEnableWirelessStationDenAssocOnSpectrum, wsTrapEnableWirelessStationDenAssocOnErr, wsTrapEnableWirelessStationDenAssocOnSSID, wsTrapEnableWirelessStationDenAssocOnRates, wsTrapEnableWirelessStationDenAssocOnInvalidWPA, wsTrapEnableWirelessStationDenAssocAsPortCapReached, wsTrapEnableWirelessStationTkipCntMeasures, wsTrapEnableWirelessStationDenAuth, wsTrapEnableWirelessStationRadAuthFail, wsTrapEnableWirelessRadioAdopted, wsTrapEnableWirelessRadioUnadopted, wsTrapEnableWirelessRadioDetectedRadar, wsTrapEnableWirelessSelfHealActivate, wsTrapEnableAllClusterTrap, wsTrapEnableAllNsmTrap, wsTrapEnableAllMiscTrap, wsTrapWirelessAPMac, wsTrapWirelessStatWlanName, wsTrapWirelessStatMuIPAddr, wsTrapWirelessStatPortalMac, wsTrapDisableAllWirelessTrap, wsTrapNsmIfDescr, wsTrapNsmIpAdEntAddr, wsTrapNsmIpAdEntNetMask, wsTrapDisableAllSnmpTrap, wsTrapDisableAllNsmTrap, wsTrapDisableAllClusterTrap, wsTrapDisableAllMiscTrap, wsTrapDisableAllWirelessStationTrap, wsTrapDisableAllWirelessRadioTrap, wsTrapDisableAllWirelessSelfHealTrap, wsTrapDisableAllWirelessIdsTrap, wsTrapEnableAllTrap, wsTrapDisableAllTrap, wsTrapEnableMobilityOperUp, wsTrapEnableMobilityOperDown, wsTrapEnableMobilityPeerUp, wsTrapEnableMobilityPeerDown, wsTrapEnableAllMobilityTrap, wsTrapDisableAllMobilityTrap, wsTrapDisableAllDHCPServerTrap, wsTrapEnableAllDHCPServerTrap, wsTrapEnableDHCPServerStarted, wsTrapDisableAllRadiusServerTrap, wsTrapEnableAllRadiusServerTrap, wsTrapEnableRadiusServerStopped, wsTrapEnableRadiusServerStarted, wsTrapEnableWirelessIdsMuEvent, wsTrapEnableWirelessIdsRadioEvent, wsTrapEnableWirelessIdsSwitchEvent, wsTrapEnableWirelessUnapprovedAPDetected, wsTrapEnableAllWirelessUnapprovedAPTrap, wsTrapDisableAllWirelessUnapprovedAPTrap, wsTrapGlobalEnableFlag, wsTrapEnableMiscLowFileSystemSpace, wsTrapEnableMiscSavedConfigModified, wsTrapEnableMiscCaCertExpired, wsTrapEnableWirelessUnapprovedAPRemoved, wsTrapEnableDHCPServerStopped, wsTrapEnableDiagResCpuLoad1Min, wsTrapEnableDiagResCpuLoad5Min, wsTrapEnableDiagResCpuLoad15Min, wsTrapEnableUsedKernBuff, wsTrapDiagUsedKernBuffSize, wsTrapDiagUsedKernBuffUsed, wsTrapDiagUsedKernBuffLimit, wsTrapEnableAllDiagTrap, wsTrapDisableAllDiagTrap, wsTrapEnableWirelessWlanVlanUserLimit, wsTrapEnableWirelessStationVlanChanged, wsTrapEnableMiscPeriodicHeartbeat, wsTrapEnableMiscSwitchEvent, wsTrapEnableWirelessWlanWebPortalUnreachable, wsTrapEnableWirelessWlanWebPortalUnavailable, wsTrapEnableWirelessWlanWebPortalUnconnected, wsTrapEnableAllWirelessWlanTrap, wsTrapDisableAllWirelessWlanTrap, wsTrapEnableCriticalResourceDown, wsTrapEnableCriticalResourceUp, wsTrapSmtpNotifyWirelessWlanTrap, wsTrapSmtpNotifyMobilityTrap, wsTrapSmtpNotifyDHCPServerTrap, wsTrapSmtpNotifyRadiusServerTrap, wsTrapSmtpNotifyWirelessRadioTrap, wsTrapSmtpNotifyWirelessUnapprovedAPTrap, wsTrapSmtpNotifyWirelessSelfHealTrap, wsTrapSmtpNotifyWirelessIdsTrap, wsTrapSmtpNotifyWirelessStatModule, wsTrapSmtpNotifyNsmTrap, wsTrapSmtpNotifyDiagTrap, wsTrapSmtpNotifyClusterTrap, wsTrapSmtpNotifyMiscTrap, wsTrapSmtpNotifyWirelessStationTrap, wsTrapSmtpNotifySnmpTrap, wsTrapEnableWirelessIgnoredAPDetected, wsTrapWirelessAPIpAddress, wsTrapEnableWirelessRadioDetectedMuInterference, wsTrapEnableWirelessRadioDetectedApInterference, wsTrapEnableWirelessRadioFlashWriteError, wsTrapWirelessInterferingMac, wsTrapEnableNsmApIPChanged, wsTrapEnableMiscServerCertExpired, wsTrapEnableDiagTempHigh, wsTrapEnableDiagTempOver, wsTrapEnableDiagFanSpeedLow, wsTrapEnableDiagRamFree, wsTrapEnableDiagProcMemUsage, wsTrapEnableDiagPktBuf, wsTrapEnableDiagIpRouteCache, wsTrapWirelessRadioCertResult, wsTrapEnableWirelessRadioInvalidCertAttack, wsTrapEnableWirelessRadioStationRepetitiveAttack, wsTrapEnableWirelessRadioTamperAttack, wsTrapEnableWirelessRadioLowSafeLevelAttack, wsTrapEnableWirelessRadioAddressRedirectionAttack, wsTrapEnableWirelessRadioApSwitchTimeSyncFailure, wsTrapSmtpNotifyWirelessApTrap, wsTrapDisableAllWirelessApTrap, wsTrapEnableAllWirelessApTrap, wsTrapEnableDiagFileDesc, wsTrapEnableNsmSwitchIPChanged, wsTrapWirelessRadioDfsFreeThresh, wsTrapEnableWirelessRadioDfsFreeCountBelowThresh, wsTrapEnableWirelessApSsidKeyConflict, wsTrapEnableWirelessApSwUpdateFail, wsTrapEnableWirelessApMonitorModeChanged, wsTrapEnableWirelessRadioDfsFreeCountBelowThreshRecover, wsTrapEnableDiagMemUsageTooHighRecover, wsTrapEnableDiagMemUsageTooHigh, wsTrapDiagMemUsageLimit, wsTrapEnableDiagCpuUsageTooHighRecover, wsTrapEnableDiagCpuUsageTooHigh, wsTrapDiagConfigErrorLine, wsTrapEnableWirelessApCpuUsageTooHigh, wsTrapEnableSnmpWarmStart, wsTrapEnableWirelessWlanWebPortalAvailable, wsTrapWirelessWlanRadiusAuthServIpAddr, wsTrapEnableWirelessWlanRadiusAuthServUnavailable, wsTrapEnableWirelessWlanRadiusAuthServAvailable, wsTrapWirelessWlanRadiusAccServIpAddr, wsTrapEnableWirelessWlanRadiusAccServUnavailable, wsTrapEnableWirelessWlanRadiusAccServAvailable, wsTrapEnableDHCPServerAddressExhaust, wsTrapEnableDHCPServerAddressExhaustRecover, wsTrapEnableWirelessRadioDetectedMuInterferenceRecover, wsTrapEnableWirelessRadioDetectedApInterferenceRecover, wsTrapWirelessIdsSsid, wsTrapEnableWirelessIdsUnauthorizedSsid, wsTrapEnableDiagTempTooHighRecover, wsTrapEnableWirelessRadioDownRecover, wsTrapEnableWirelessRadioDown, wsTrapEnableWirelessRadioModuleTroubleRecover, wsTrapEnableWirelessRadioModuleTrouble, wsTrapEnableWirelessRadioDetectedDeviceInterferenceRecover, wsTrapEnableWirelessRadioDetectedDeviceInterference, wsTrapEnableWirelessApCpuUsageTooHighRecover, wsTrapEnableDiagConfigError, wsTrapEnableWirelessApMemUsageTooHigh, wsTrapEnableWirelessApMemUsageTooHighRecover, wsTrapDHCPServerPool } STATUS current DESCRIPTION "Description." ::= { wsTrapGroups 2 } END -- -- WS-TRAP-MIB.my --