MCRW-01-SDCMOTORISED-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice, VerificationState FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } devObjs OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 1 } srvObjs OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 4 } ----------------------------------------------------------- -- Device Service Miscellaneous Definitions ----------------------------------------------------------- Reset ::= INTEGER { reset (1) } ----------------------------------------------------------- -- SST Device - MCRW-01-SdcMotorised ----------------------------------------------------------- devManufacturer OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The name of the manufacturer of the product." ::= { devObjs 1 } devProduct OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "This attribute does not apply to SST devices." ::= { devObjs 2 } devVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "This attribute does not apply to SST devices." ::= { devObjs 3 } devSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "This attribute does not apply to SST devices." ::= { devObjs 4 } devInstallation OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "The date and time, in DMI-defined format, when the component was (last) installed." ::= { devObjs 5 } devVerify OBJECT-TYPE SYNTAX VerificationState ACCESS read-only STATUS optional DESCRIPTION "A level of verification that the device software is installed and functioning. This attribute is not currently supported." ::= { devObjs 6 } devName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The unique, platform-defined name of the device." ::= { devObjs 7 } devShortDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The platform-defined short description of the device." ::= { devObjs 8 } devLongDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The platform-defined long description of the device." ::= { devObjs 9 } devUniversalId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique, platform-defined identifier for the type of device." ::= { devObjs 10 } devVariant OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier for the specific hardware configuration of the device, indicating what hardware the device has." ::= { devObjs 11 } devSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The summary state of the device indicating the state of the device's least healthy module." ::= { devObjs 12 } -- SST End of Device Info ----------------------------------------------------------- -- SST Service Table ----------------------------------------------------------- srvServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the services associated with the device.." ::= { srvObjs 1 } srvServiceEntry OBJECT-TYPE SYNTAX SrvServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { srvServiceIndex } ::= { srvServiceTable 1 } SrvServiceEntry ::= SEQUENCE { srvServiceIndex DisplayString, srvServiceVariant INTEGER, srvServiceState OCTET STRING, srvServiceMaintenance OCTET STRING, srvServiceReplenishment OCTET STRING, srvServiceClearState Reset, srvServiceClearTallies Reset } srvServiceIndex OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A unique, platform-defined name for each service." ::= { srvServiceEntry 1 } srvServiceVariant OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current configuration of the service, indicating the additional transaction facilities available to the transaction application." ::= { srvServiceEntry 2 } srvServiceState OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the current level of availability of the service parts to the transaction application." ::= { srvServiceEntry 3 } srvServiceMaintenance OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Maintenance information associated with the last state change in the service: M-Code, M-Status and M-Data." ::= { srvServiceEntry 4 } srvServiceReplenishment OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Replenishment status data associated with the last state change in the service: RS-Data." ::= { srvServiceEntry 5 } srvServiceClearState OBJECT-TYPE SYNTAX Reset ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute clears all parts of the service to a good (fully functioning and available) state, but does not guarantee that the fault has been cleared." ::= { srvServiceEntry 6 } srvServiceClearTallies OBJECT-TYPE SYNTAX Reset ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute clears all tallies supported by the service." ::= { srvServiceEntry 7 } ----------------------------------------------------------- -- SST Service Tallies Table ----------------------------------------------------------- srvServiceTallyTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvServiceTallyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the counters supported by the device service to record the operations, usage and performance of the device it manages." ::= { srvObjs 2 } srvServiceTallyEntry OBJECT-TYPE SYNTAX SrvServiceTallyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { srvServiceNameIndex, srvServiceTallyIndex } ::= { srvServiceTallyTable 1 } SrvServiceTallyEntry ::= SEQUENCE { srvServiceNameIndex DisplayString, srvServiceTallyIndex INTEGER, srvServiceTallyName DisplayString, srvServiceTallyValue Counter } srvServiceNameIndex OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A unique name for each service." ::= { srvServiceTallyEntry 1 } srvServiceTallyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each tally." ::= { srvServiceTallyEntry 2 } srvServiceTallyName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the tally." ::= { srvServiceTallyEntry 3 } srvServiceTallyValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the tally." ::= { srvServiceTallyEntry 4 } END MCRW-01-SDCMOTORISED-CARDREADER-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } cardReader OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 5 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - cardReader ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { cardReader 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { cardReader 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { cardReader 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { cardReader 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { cardReader 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { cardReader 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { cardReader 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { cardReader 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { cardReader 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { cardReader 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { cardReader 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { cardReader 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { cardReader 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { cardReader 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { cardReader 15 } ----------------------------------------------------------- -- Device Module Variable Table - cardReader ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { cardReader 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - cardReader ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { cardReader 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-TRANSPORT-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } transport OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 6 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - transport ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { transport 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { transport 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { transport 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { transport 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { transport 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { transport 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { transport 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { transport 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { transport 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { transport 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { transport 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { transport 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { transport 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { transport 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { transport 15 } ----------------------------------------------------------- -- Device Module Variable Table - transport ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { transport 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - transport ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { transport 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-READ_WRITEMAGNETICHEAD-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } read_writeMagneticHead OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 7 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - read_writeMagneticHead ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { read_writeMagneticHead 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { read_writeMagneticHead 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { read_writeMagneticHead 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { read_writeMagneticHead 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { read_writeMagneticHead 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { read_writeMagneticHead 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { read_writeMagneticHead 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { read_writeMagneticHead 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { read_writeMagneticHead 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { read_writeMagneticHead 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { read_writeMagneticHead 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { read_writeMagneticHead 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { read_writeMagneticHead 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { read_writeMagneticHead 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { read_writeMagneticHead 15 } ----------------------------------------------------------- -- Device Module Variable Table - read_writeMagneticHead ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { read_writeMagneticHead 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - read_writeMagneticHead ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { read_writeMagneticHead 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-CARDRETURNONPOWERFAIL-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } cardReturnOnPowerFail OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 8 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - cardReturnOnPowerFail ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { cardReturnOnPowerFail 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { cardReturnOnPowerFail 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { cardReturnOnPowerFail 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { cardReturnOnPowerFail 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { cardReturnOnPowerFail 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { cardReturnOnPowerFail 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { cardReturnOnPowerFail 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { cardReturnOnPowerFail 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { cardReturnOnPowerFail 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { cardReturnOnPowerFail 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { cardReturnOnPowerFail 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { cardReturnOnPowerFail 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { cardReturnOnPowerFail 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { cardReturnOnPowerFail 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { cardReturnOnPowerFail 15 } ----------------------------------------------------------- -- Device Module Variable Table - cardReturnOnPowerFail ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { cardReturnOnPowerFail 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - cardReturnOnPowerFail ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { cardReturnOnPowerFail 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-CARDCAPTUREBIN-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } cardCaptureBin OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 9 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - cardCaptureBin ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { cardCaptureBin 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { cardCaptureBin 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { cardCaptureBin 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { cardCaptureBin 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { cardCaptureBin 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { cardCaptureBin 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { cardCaptureBin 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { cardCaptureBin 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { cardCaptureBin 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { cardCaptureBin 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { cardCaptureBin 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { cardCaptureBin 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { cardCaptureBin 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { cardCaptureBin 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { cardCaptureBin 15 } ----------------------------------------------------------- -- Device Module Variable Table - cardCaptureBin ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { cardCaptureBin 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - cardCaptureBin ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { cardCaptureBin 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-CIM_MMINTERFACE-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } cim_mmInterface OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 10 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - cim_mmInterface ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { cim_mmInterface 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { cim_mmInterface 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { cim_mmInterface 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { cim_mmInterface 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { cim_mmInterface 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { cim_mmInterface 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { cim_mmInterface 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { cim_mmInterface 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { cim_mmInterface 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { cim_mmInterface 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { cim_mmInterface 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { cim_mmInterface 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { cim_mmInterface 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { cim_mmInterface 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { cim_mmInterface 15 } ----------------------------------------------------------- -- Device Module Variable Table - cim_mmInterface ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { cim_mmInterface 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - cim_mmInterface ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { cim_mmInterface 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-CIM_MMMODULE-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } cim_mmModule OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 11 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - cim_mmModule ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { cim_mmModule 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { cim_mmModule 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { cim_mmModule 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { cim_mmModule 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { cim_mmModule 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { cim_mmModule 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { cim_mmModule 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { cim_mmModule 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { cim_mmModule 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { cim_mmModule 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { cim_mmModule 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { cim_mmModule 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { cim_mmModule 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { cim_mmModule 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { cim_mmModule 15 } ----------------------------------------------------------- -- Device Module Variable Table - cim_mmModule ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { cim_mmModule 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - cim_mmModule ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { cim_mmModule 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END MCRW-01-SDCMOTORISED-SMARTCARDREADER-MIB DEFINITIONS ::= BEGIN -- -- SST MCRW-01-SDCMOTORISED MIB -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC-1213 TruthValue FROM RFC1253-MIB sstDevice FROM NCR-CORESST-MIB; mcrw-01-SdcMotorised OBJECT IDENTIFIER ::= { sstDevice 1 } smartCardReader OBJECT IDENTIFIER ::= { mcrw-01-SdcMotorised 12 } ----------------------------------------------------------- -- Device Module Miscellaneous Definitions ----------------------------------------------------------- ModuleState ::= INTEGER { healthy (1), attentionSoon (2), attentionNow (3), notConfigured (4) } VariableType ::= INTEGER { noThreshold (1), singleThreshold (2), doubleThreshold (3), wordDoubleThreshold (4), measurementSingleThreshold (5), threshold (6)} ActionType ::= INTEGER { fill (1), empty (2), renew (3), replace (4), repair (5) } ----------------------------------------------------------- -- SST Device Module - smartCardReader ----------------------------------------------------------- modIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Within the device, this is a unique identifier for the module." ::= { smartCardReader 1 } modDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module." ::= { smartCardReader 2 } modReplenishable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can be replenished (filled, emptied or renewed). A value of FALSE means it can be repaired or replaced." ::= { smartCardReader 3 } modCurrentSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The current summary state of the module." ::= { smartCardReader 4 } modCurrentDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the current detailed state." ::= { smartCardReader 5 } modCurrentDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the current detailed state." ::= { smartCardReader 6 } modPreviousSummaryState OBJECT-TYPE SYNTAX ModuleState ACCESS read-only STATUS mandatory DESCRIPTION "The previous summary state of the module." ::= { smartCardReader 7 } modPreviousDetailedState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status code for the previous detailed state." ::= { smartCardReader 8 } modPreviousDetailedStateDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the previous detailed state." ::= { smartCardReader 9 } modFaultId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string of digits summarizing all the information about the current state of the module." ::= { smartCardReader 10 } modAssemSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The serial number of the module." ::= { smartCardReader 11 } modAssemAssem OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The assembly number of the module." ::= { smartCardReader 12 } modAssemCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "The manufacturing code of the module." ::= { smartCardReader 13 } modPMDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS optional DESCRIPTION "Date of the last scheduled service of the module." ::= { smartCardReader 14 } modPMData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Details of the last scheduled service of the module." ::= { smartCardReader 15 } ----------------------------------------------------------- -- Device Module Variable Table - smartCardReader ----------------------------------------------------------- modVarTable OBJECT-TYPE SYNTAX SEQUENCE OF ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the variables used by the module to manage its operational state." ::= { smartCardReader 16 } modVarEntry OBJECT-TYPE SYNTAX ModVarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modVarIndex } ::= { modVarTable 1 } ModVarEntry ::= SEQUENCE {modVarIndex INTEGER, modVarDesc DisplayString, modVarType VariableType, modVarValue Counter, modVarThreshold1 INTEGER, modVarThreshold2 INTEGER } modVarIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique number for every entry in the module variables table." ::= { modVarEntry 1 } modVarDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module variable." ::= { modVarEntry 2 } modVarType OBJECT-TYPE SYNTAX VariableType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating whether the variable has thresholds and the type of threshold." ::= { modVarEntry 3 } modVarValue OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the module variable." ::= { modVarEntry 4 } modVarThreshold1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with one threshold, this is a final value. For variables with two thresholds, this is a warning value." ::= { modVarEntry 5 } modVarThreshold2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "For variables with two thresholds, this is the final value." ::= { modVarEntry 6 } ----------------------------------------------------------- -- Device Module Actions Table - smartCardReader ----------------------------------------------------------- modActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the attributes of the actions that can be performed on the module to restore or maintain its normal operational state." ::= { smartCardReader 17 } modActionEntry OBJECT-TYPE SYNTAX ModActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This defines the contents of the table." INDEX { modActionIndex } ::= { modActionTable 1 } ModActionEntry ::= SEQUENCE { modActionIndex INTEGER, modActionDesc DisplayString, modActionType ActionType, modActionFaultDetect TruthValue, modActionActiveDetect TruthValue, modActionProactive TruthValue, modActionCustomerAction TruthValue, modActionComplete TruthValue } modActionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique number for each action in the module actions table." ::= { modActionEntry 1 } modActionDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the module action." ::= { modActionEntry 2 } modActionType OBJECT-TYPE SYNTAX ActionType ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated value indicating the type of action performed on the module." ::= { modActionEntry 3 } modActionFaultDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can automatically detect that the action has been performed for the associated fault that was reported." ::= { modActionEntry 4 } modActionProactive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the action can be performed on the module before the associated fault occurs." ::= { modActionEntry 5 } modActionProactiveDetect OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the module can, through its sensors, automatically detect that the action has been performed before the associated fault occurs." ::= { modActionEntry 6 } modActionCustomerActionable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A value of TRUE means the customer can perform the action." ::= { modActionEntry 7 } modActionComplete OBJECT-TYPE SYNTAX TruthValue ACCESS write-only STATUS mandatory DESCRIPTION "Setting the value of this attribute to TRUE informs the module that the action has been performed, and clears the appropriate module variables." ::= { modActionEntry 8 } END