Nortel-Magellan-Passport-DpnRoutingMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB RowPointer, DisplayString, StorageType, RowStatus, PassportCounter64, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB NonReplicated, AsciiStringIndex FROM Nortel-Magellan-Passport-TextualConventionsMIB rtgIndex, rtg FROM Nortel-Magellan-Passport-BaseRoutingMIB; -- LAST-UPDATED "9903220000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- DpnRouting Enterprise MIB." dpnRoutingMIB OBJECT IDENTIFIER ::= { passportMIBs 21 } -- Routing DpnAddressPlan -- This component is a subcomponent of Routing. It resides on all -- Passport nodes that carry DPN traffic and is responsible for -- maintaining the routing information required to route this traffic. -- -- It is required on nodes that (i) support gateways to RMs and/or -- AMs, (ii) nodes that source and/or sink DPN traffic (for example, -- nodes which support VC end points), and (iii) intermediary nodes -- that simply carry DPN traffic. rtgDpn OBJECT IDENTIFIER ::= { rtg 4 } rtgDpnRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of rtgDpn components." ::= { rtgDpn 1 } rtgDpnRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpn component." INDEX { rtgIndex, rtgDpnIndex } ::= { rtgDpnRowStatusTable 1 } RtgDpnRowStatusEntry ::= SEQUENCE { rtgDpnRowStatus RowStatus, rtgDpnComponentName DisplayString, rtgDpnStorageType StorageType, rtgDpnIndex NonReplicated } rtgDpnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpn components. These components cannot be added nor deleted." ::= { rtgDpnRowStatusEntry 1 } rtgDpnComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnRowStatusEntry 2 } rtgDpnStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpn tables." ::= { rtgDpnRowStatusEntry 4 } rtgDpnIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpn tables." ::= { rtgDpnRowStatusEntry 10 } rtgDpnProvTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioning data for the DpnAddressPlan. Attributes in this group must be set to allow the DpnAddressPlan component to function properly." ::= { rtgDpn 11 } rtgDpnProvEntry OBJECT-TYPE SYNTAX RtgDpnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnProvTable." INDEX { rtgIndex, rtgDpnIndex } ::= { rtgDpnProvTable 1 } RtgDpnProvEntry ::= SEQUENCE { rtgDpnLogicalNetworkNumber Unsigned32, rtgDpnRoutingId Unsigned32, rtgDpnModuleId Unsigned32, rtgDpnDelayMetricCutOff Unsigned32, rtgDpnThroughputMetricCutOff Unsigned32, rtgDpnForwardingPolicy INTEGER, rtgDpnDelayMetricRangeBoundary Unsigned32, rtgDpnTputMetricRangeBoundary Unsigned32 } rtgDpnLogicalNetworkNumber OBJECT-TYPE SYNTAX Unsigned32 (1..1) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the Logical Network Number for the DpnAddressPlan. Since only one instance of this component can exist, this value is always set to one. It is provided here to be consistent with other address plans and so that it can be queried." DEFVAL { 1 } ::= { rtgDpnProvEntry 1 } rtgDpnRoutingId OBJECT-TYPE SYNTAX Unsigned32 (1..126) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Routing Identifier (RID) associated with the Passport node. The RID is used to identify a group of one or more interconnected Passport nodes (called a subnet) supporting the transport of DPN traffic. Its value must be the same as that of the other Passport nodes in this subnet and different from that of all RMs and other Passport subnets in the network. The routingId must be set when a DpnAddressPlan component is configured on an Passport node. Changing the value of the routingId will cause the node to restart." ::= { rtgDpnProvEntry 2 } rtgDpnModuleId OBJECT-TYPE SYNTAX Unsigned32 (1..1909) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Module Identifier (MID) associated with the Passport node. The MID is used to identify an Passport node supporting the transport of DPN traffic. Its value must be different from that of all MIDs assigned to Passport nodes in this RID subnet (interconnected Passport nodes sharing a RID) and AMs in clusters supported by this subnet. If routing zones are used, it must also be unique from all other MIDs in this zone. The moduleId must be set when a DpnAddressPlan component is configured on an Passport node. Changing the value of the moduleId will cause the node to restart." ::= { rtgDpnProvEntry 3 } rtgDpnDelayMetricCutOff OBJECT-TYPE SYNTAX Unsigned32 (64..250) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the delay metric value beyond which a destination RID should be considered unreachable. That is, if a delay metric to a RID is equal to or greater than this value then the RID is considered to be unreachable in the delay class of service. Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario. Care must be taken to ensure that the value chosen is big enough for the longest delay path in the network. This attribute is optional; a default of 128 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value." DEFVAL { 128 } ::= { rtgDpnProvEntry 4 } rtgDpnThroughputMetricCutOff OBJECT-TYPE SYNTAX Unsigned32 (128..245) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the throughput metric value beyond which a destination RID should be considered unreachable. That is, if a throughput metric to a RID is equal to or greater than this value then the RID will be considered to be unreachable in the throughput class of service. Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario.Care must be taken to ensure that the value chosen is big enough for the longest throughput path in the network. This attribute is optional; a default of 245 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value." DEFVAL { 245 } ::= { rtgDpnProvEntry 5 } rtgDpnForwardingPolicy OBJECT-TYPE SYNTAX INTEGER { loadspread(0), loadshare(1), loadspreadFast(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the forwarding policy used by packet forwarding to handle DPN traffic on a Passport module. When this attribute is set to loadshare, DPN traffic is shared among preferred links in a link group in proportion to the available bandwidth on each link; the traffic is not forwarded in an order- preserved manner and needs resequencing at the destination, but the available bandwidth in a link group is utilized efficiently. When this attribute is set to loadspread, DPN traffic is forwarded in an order-preserved manner along a randomly selected route; the traffic sticks to a particular link in a link group, and will not spill over to other links in the link group unless there is congestion on the selected link. When this attribute is set to loadspreadFast, DPN traffic is forwarded in an order-preserved manner along a randomly selected route; the traffic sticks to a particular link in a link group, and will not spill over to other links in the link group. Choosing this value may improve throughput but traffic may be discarded in the presence of congestion. It is recommended that all nodes in the network be provisioned with the same forwarding policy." DEFVAL { loadspread } ::= { rtgDpnProvEntry 6 } rtgDpnDelayMetricRangeBoundary OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the total path delay metric below which the variance value specified for delay COS and a low metric range is used, and at or above which the variance value specified for delay COS and a high metric range is used. This attribute defaults to 0, so that the variance value specified for delay COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for delay COS and a low metric range is used for all delay paths." DEFVAL { 0 } ::= { rtgDpnProvEntry 7 } rtgDpnTputMetricRangeBoundary OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the total path throughput metric below which the variance value specified for throughput COS and a low metric range is used, and at or above which the variance value specified for throughput COS and a high metric range is used. This attribute defaults to 0, so that the variance value specified for throughput COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for throughput COS and a low metric range is used for all throughput paths." DEFVAL { 0 } ::= { rtgDpnProvEntry 8 } rtgDpnConStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnConStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes provides statistics about the behavior of the DpnAddressPlan component. The statistics concern the distribution of routing information, required to support the routing of DPN traffic, to all Passport nodes in the RID subnet." ::= { rtgDpn 13 } rtgDpnConStatsEntry OBJECT-TYPE SYNTAX RtgDpnConStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnConStatsTable." INDEX { rtgIndex, rtgDpnIndex } ::= { rtgDpnConStatsTable 1 } RtgDpnConStatsEntry ::= SEQUENCE { rtgDpnControlPktTx Unsigned32, rtgDpnControlPktRx Unsigned32, rtgDpnControlBytesTx Unsigned32, rtgDpnControlBytesRx Unsigned32, rtgDpnOutOfSequencePkt Unsigned32 } rtgDpnControlPktTx OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of internal Passport DPN control packets, originating from this node, sent to other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The Packets received from a neighbor node and forwarded to other neighbors are not counted. The counter wraps around to zero when the maximum value is reached." ::= { rtgDpnConStatsEntry 1 } rtgDpnControlPktRx OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of internal Passport DPN control packets received from other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached." ::= { rtgDpnConStatsEntry 2 } rtgDpnControlBytesTx OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of internal Passport DPN control packet bytes, originating from the node, sent to other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. Packet bytes received from a neighbor node and forwarded to other neighbors are not counted. The counter wraps around to zero when the maximum value is reached." ::= { rtgDpnConStatsEntry 3 } rtgDpnControlBytesRx OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of internal Passport DPN control packet bytes received from other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached." ::= { rtgDpnConStatsEntry 4 } rtgDpnOutOfSequencePkt OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of internal Passport DPN control packets received and rejected. These packets contained old sequence numbers. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached." ::= { rtgDpnConStatsEntry 5 } rtgDpnFwdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnFwdStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes provides statistics for the traffic handled by DPN packet forwarding on this module. The statistics can be used to monitor the connectionless traffic profile on this module." ::= { rtgDpn 14 } rtgDpnFwdStatsEntry OBJECT-TYPE SYNTAX RtgDpnFwdStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnFwdStatsTable." INDEX { rtgIndex, rtgDpnIndex } ::= { rtgDpnFwdStatsTable 1 } RtgDpnFwdStatsEntry ::= SEQUENCE { rtgDpnTotalPackets PassportCounter64, rtgDpnThroughputPackets PassportCounter64, rtgDpnDelayPackets PassportCounter64, rtgDpnNormalReliabilityPackets PassportCounter64, rtgDpnHighReliabilityPackets PassportCounter64, rtgDpnDiscardNoRoute PassportCounter64, rtgDpnInterruptingPackets PassportCounter64, rtgDpnDiscardLpCongested PassportCounter64 } rtgDpnTotalPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of delay and throughput packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 1 } rtgDpnThroughputPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the throughput packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 2 } rtgDpnDelayPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the delay packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 3 } rtgDpnNormalReliabilityPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the normal reliability packets handled by DPN packet forwarding on this module when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 4 } rtgDpnHighReliabilityPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the high reliability packets handled by DPN packet forwarding on this module when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 5 } rtgDpnDiscardNoRoute OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the packets discarded when DPN packet forwarding has failed to find a route to forward the packets on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 6 } rtgDpnInterruptingPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of multimedia packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 7 } rtgDpnDiscardLpCongested OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the packets that have been discarded by packet forwarding due to LP congestion on this module. A packet encounters LP congestion when there is insufficient shared memory. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnFwdStatsEntry 8 } rtgDpnCallServerModuleRidsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCallServerModuleRidsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the RIDs of the Call Server Resource Modules (CSRMs) currently in use to support Call Server functions, such as SCR and DCR, for the Passport subnet. Up to two CSRMs can be in use to support such Call Server functions. Note that packets destined to Call Server functions are routed to the closest CSRM supporting the required server functionality." ::= { rtgDpn 232 } rtgDpnCallServerModuleRidsEntry OBJECT-TYPE SYNTAX RtgDpnCallServerModuleRidsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCallServerModuleRidsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCallServerModuleRidsValue } ::= { rtgDpnCallServerModuleRidsTable 1 } RtgDpnCallServerModuleRidsEntry ::= SEQUENCE { rtgDpnCallServerModuleRidsValue Integer32 } rtgDpnCallServerModuleRidsValue OBJECT-TYPE SYNTAX Integer32 (1..126) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the rtgDpnCallServerModuleRidsTable." ::= { rtgDpnCallServerModuleRidsEntry 1 } rtgDpnSubnetMidsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnSubnetMidsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates which of the ReachableMidInfo (Mid) components refer to MIDs which are members of the Passport subnet. This list does not include AMs connected to the subnet." ::= { rtgDpn 233 } rtgDpnSubnetMidsEntry OBJECT-TYPE SYNTAX RtgDpnSubnetMidsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnSubnetMidsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnSubnetMidsValue } ::= { rtgDpnSubnetMidsTable 1 } RtgDpnSubnetMidsEntry ::= SEQUENCE { rtgDpnSubnetMidsValue RowPointer } rtgDpnSubnetMidsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the rtgDpnSubnetMidsTable." ::= { rtgDpnSubnetMidsEntry 1 } rtgDpnVarianceTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnVarianceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies the variance values for high and low metric ranges, for each class of service (COS). A variance value is the maximum allowed difference in metric between the best path and the second path, as a percentage of the best path metric. High and low metric ranges are defined for each COS by the delayMetricRangeBoundary and tputMetricRangeBoundary attributes, and refer to total path metrics. When a variance value for a certain COS and metric range is set to the default value of 0, only equal metric paths can be used under that COS when the best path metric is in that range. When it is set to a value greater than 0, an alternate path which is safe (that is, non-looping) and which has a metric within this percentage of the best path metric can be used as a multipath. The special value of 9999 signifies an infinite variance, so that any safe alternate path may be used in addition to the single best path, regardless of its metric." ::= { rtgDpn 343 } rtgDpnVarianceEntry OBJECT-TYPE SYNTAX RtgDpnVarianceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnVarianceTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnVarianceCosIndex, rtgDpnVarianceMetricRangeIndex } ::= { rtgDpnVarianceTable 1 } RtgDpnVarianceEntry ::= SEQUENCE { rtgDpnVarianceCosIndex INTEGER, rtgDpnVarianceMetricRangeIndex INTEGER, rtgDpnVarianceValue Unsigned32 } rtgDpnVarianceCosIndex OBJECT-TYPE SYNTAX INTEGER { delay(0), throughput(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the rtgDpnVarianceTable." ::= { rtgDpnVarianceEntry 1 } rtgDpnVarianceMetricRangeIndex OBJECT-TYPE SYNTAX INTEGER { low(0), high(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the rtgDpnVarianceTable." ::= { rtgDpnVarianceEntry 2 } rtgDpnVarianceValue OBJECT-TYPE SYNTAX Unsigned32 (0..500 | 9999) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnVarianceTable." ::= { rtgDpnVarianceEntry 3 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Routing Dpn ReachableRidInfo/ -- This component is a dynamic subcomponent of the -- DpnAddressPlan. It provides information about the paths to RIDs in -- the network that are reachable. -- -- There is one instance per reachable RID. rtgDpnRid OBJECT IDENTIFIER ::= { rtgDpn 2 } rtgDpnRidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgDpnRid components." ::= { rtgDpnRid 1 } rtgDpnRidRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnRidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnRid component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex } ::= { rtgDpnRidRowStatusTable 1 } RtgDpnRidRowStatusEntry ::= SEQUENCE { rtgDpnRidRowStatus RowStatus, rtgDpnRidComponentName DisplayString, rtgDpnRidStorageType StorageType, rtgDpnRidIndex Integer32 } rtgDpnRidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnRid components. These components cannot be added nor deleted." ::= { rtgDpnRidRowStatusEntry 1 } rtgDpnRidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnRidRowStatusEntry 2 } rtgDpnRidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnRid tables." ::= { rtgDpnRidRowStatusEntry 4 } rtgDpnRidIndex OBJECT-TYPE SYNTAX Integer32 (0..127) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRid tables." ::= { rtgDpnRidRowStatusEntry 10 } rtgDpnRidOperTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is maintained by the DpnAddressPlan component to provide information about the RIDs reachable in the network." ::= { rtgDpnRid 10 } rtgDpnRidOperEntry OBJECT-TYPE SYNTAX RtgDpnRidOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidOperTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex } ::= { rtgDpnRidOperTable 1 } RtgDpnRidOperEntry ::= SEQUENCE { rtgDpnRidDpnDelayMetric Unsigned32, rtgDpnRidDpnTputMetric Unsigned32 } rtgDpnRidDpnDelayMetric OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the minimum DPN delay metric to the destination RID. The delay metric associated with a path is computed by the routing system by translating the smallest delayMetric calculated for the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metric displayed is that of the best path to the destination. This metric is advertised to neighbor RMs and Passports in a different RID subnet. A metric value of 255 means the RID is unreachable in the delay class of service. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID. A metric value of 252 indicates that the destination RID is that of a Network Module (NM)." ::= { rtgDpnRidOperEntry 1 } rtgDpnRidDpnTputMetric OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the minimum DPN throughput metric to the destination RID. The throughput metric associated with a path is computed by the routing system by translating the smallest tputMetric calculated for the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metric displayed is that of the best path to the destination. This metric is advertised to neighbor RMs and Passports in a different RID subnet. A metric value of 255 means the RID is unreachable in the throughput class of service. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID." ::= { rtgDpnRidOperEntry 2 } rtgDpnRidDelayNextHopLinkGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidDelayNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination RID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an RM. If no link groups are listed then the destination is not reachable in the delay class of service (except in the case of the local node's RID). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it." ::= { rtgDpnRid 226 } rtgDpnRidDelayNextHopLinkGroupsEntry OBJECT-TYPE SYNTAX RtgDpnRidDelayNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidDelayNextHopLinkGroupsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidDelayNextHopLinkGroupsIndex } ::= { rtgDpnRidDelayNextHopLinkGroupsTable 1 } RtgDpnRidDelayNextHopLinkGroupsEntry ::= SEQUENCE { rtgDpnRidDelayNextHopLinkGroupsIndex Integer32, rtgDpnRidDelayNextHopLinkGroupsValue RowPointer } rtgDpnRidDelayNextHopLinkGroupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidDelayNextHopLinkGroupsTable." ::= { rtgDpnRidDelayNextHopLinkGroupsEntry 1 } rtgDpnRidDelayNextHopLinkGroupsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnRidDelayNextHopLinkGroupsTable." ::= { rtgDpnRidDelayNextHopLinkGroupsEntry 2 } rtgDpnRidTputNextHopLinkGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidTputNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination RID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an RM. If no link groups are listed then the destination is not reachable in the throughput class of service (except in the case of the local node's RID). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it." ::= { rtgDpnRid 227 } rtgDpnRidTputNextHopLinkGroupsEntry OBJECT-TYPE SYNTAX RtgDpnRidTputNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidTputNextHopLinkGroupsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidTputNextHopLinkGroupsIndex } ::= { rtgDpnRidTputNextHopLinkGroupsTable 1 } RtgDpnRidTputNextHopLinkGroupsEntry ::= SEQUENCE { rtgDpnRidTputNextHopLinkGroupsIndex Integer32, rtgDpnRidTputNextHopLinkGroupsValue RowPointer } rtgDpnRidTputNextHopLinkGroupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidTputNextHopLinkGroupsTable." ::= { rtgDpnRidTputNextHopLinkGroupsEntry 1 } rtgDpnRidTputNextHopLinkGroupsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnRidTputNextHopLinkGroupsTable." ::= { rtgDpnRidTputNextHopLinkGroupsEntry 2 } rtgDpnRidDelayPathTrafficProportionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidDelayPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs)." ::= { rtgDpnRid 328 } rtgDpnRidDelayPathTrafficProportionsEntry OBJECT-TYPE SYNTAX RtgDpnRidDelayPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidDelayPathTrafficProportionsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidDelayPathTrafficProportionsIndex } ::= { rtgDpnRidDelayPathTrafficProportionsTable 1 } RtgDpnRidDelayPathTrafficProportionsEntry ::= SEQUENCE { rtgDpnRidDelayPathTrafficProportionsIndex Integer32, rtgDpnRidDelayPathTrafficProportionsValue Unsigned32 } rtgDpnRidDelayPathTrafficProportionsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidDelayPathTrafficProportionsTable." ::= { rtgDpnRidDelayPathTrafficProportionsEntry 1 } rtgDpnRidDelayPathTrafficProportionsValue OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnRidDelayPathTrafficProportionsTable." ::= { rtgDpnRidDelayPathTrafficProportionsEntry 2 } rtgDpnRidTputPathTrafficProportionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidTputPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs)." ::= { rtgDpnRid 329 } rtgDpnRidTputPathTrafficProportionsEntry OBJECT-TYPE SYNTAX RtgDpnRidTputPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidTputPathTrafficProportionsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidTputPathTrafficProportionsIndex } ::= { rtgDpnRidTputPathTrafficProportionsTable 1 } RtgDpnRidTputPathTrafficProportionsEntry ::= SEQUENCE { rtgDpnRidTputPathTrafficProportionsIndex Integer32, rtgDpnRidTputPathTrafficProportionsValue Unsigned32 } rtgDpnRidTputPathTrafficProportionsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidTputPathTrafficProportionsTable." ::= { rtgDpnRidTputPathTrafficProportionsEntry 1 } rtgDpnRidTputPathTrafficProportionsValue OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnRidTputPathTrafficProportionsTable." ::= { rtgDpnRidTputPathTrafficProportionsEntry 2 } rtgDpnRidDelayMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidDelayMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the delay metrics of up to two paths to the destination RID. The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links in the path to the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the RID is unreachable in the delay class of service. A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID. Metric values of 2147483646 indicate that the destination RID is that of a Network Module (NM)." ::= { rtgDpnRid 339 } rtgDpnRidDelayMetricEntry OBJECT-TYPE SYNTAX RtgDpnRidDelayMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidDelayMetricTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidDelayMetricIndex } ::= { rtgDpnRidDelayMetricTable 1 } RtgDpnRidDelayMetricEntry ::= SEQUENCE { rtgDpnRidDelayMetricIndex Integer32, rtgDpnRidDelayMetricValue Unsigned32 } rtgDpnRidDelayMetricIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidDelayMetricTable." ::= { rtgDpnRidDelayMetricEntry 1 } rtgDpnRidDelayMetricValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnRidDelayMetricTable." ::= { rtgDpnRidDelayMetricEntry 2 } rtgDpnRidTputMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidTputMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the throughput metrics of up to two paths to the destination RID. The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links in the path to the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the RID is unreachable in the throughput class of service. A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID." ::= { rtgDpnRid 340 } rtgDpnRidTputMetricEntry OBJECT-TYPE SYNTAX RtgDpnRidTputMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidTputMetricTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidTputMetricIndex } ::= { rtgDpnRidTputMetricTable 1 } RtgDpnRidTputMetricEntry ::= SEQUENCE { rtgDpnRidTputMetricIndex Integer32, rtgDpnRidTputMetricValue Unsigned32 } rtgDpnRidTputMetricIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidTputMetricTable." ::= { rtgDpnRidTputMetricEntry 1 } rtgDpnRidTputMetricValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnRidTputMetricTable." ::= { rtgDpnRidTputMetricEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Routing Dpn Rid/ Mid/ -- This component is a subcomponent of ReachableRidInfo. It -- supports the ping verb by providing the ability to ping a MID under -- a RID that is known to be reachable. The state (reachable/ -- unreachable) of MIDs, other than those supported by the local RID -- subnet (see the ReachableMidInfo subcomponent), is not -- maintained by the DpnAddressPlan component. rtgDpnRidMid OBJECT IDENTIFIER ::= { rtgDpnRid 2 } rtgDpnRidMidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgDpnRidMid components." ::= { rtgDpnRidMid 1 } rtgDpnRidMidRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnRidMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnRidMid component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidIndex, rtgDpnRidMidIndex } ::= { rtgDpnRidMidRowStatusTable 1 } RtgDpnRidMidRowStatusEntry ::= SEQUENCE { rtgDpnRidMidRowStatus RowStatus, rtgDpnRidMidComponentName DisplayString, rtgDpnRidMidStorageType StorageType, rtgDpnRidMidIndex Integer32 } rtgDpnRidMidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnRidMid components. These components cannot be added nor deleted." ::= { rtgDpnRidMidRowStatusEntry 1 } rtgDpnRidMidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnRidMidRowStatusEntry 2 } rtgDpnRidMidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnRidMid tables." ::= { rtgDpnRidMidRowStatusEntry 4 } rtgDpnRidMidIndex OBJECT-TYPE SYNTAX Integer32 (0..2046) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidMid tables." ::= { rtgDpnRidMidRowStatusEntry 10 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Routing Dpn ReachableMidInfo/ -- This component is a dynamic subcomponent of the -- DpnAddressPlan. It provides information about the MIDs, -- supported by the local RID subnet, that are, or were once, -- reachable. This includes the MIDs of the Passport nodes in the -- subnet and the AM clusters supported by the subnet. -- -- The information is accessed by specifying a MID. rtgDpnMid OBJECT IDENTIFIER ::= { rtgDpn 3 } rtgDpnMidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgDpnMid components." ::= { rtgDpnMid 1 } rtgDpnMidRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnMid component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex } ::= { rtgDpnMidRowStatusTable 1 } RtgDpnMidRowStatusEntry ::= SEQUENCE { rtgDpnMidRowStatus RowStatus, rtgDpnMidComponentName DisplayString, rtgDpnMidStorageType StorageType, rtgDpnMidIndex Integer32 } rtgDpnMidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnMid components. These components cannot be added nor deleted." ::= { rtgDpnMidRowStatusEntry 1 } rtgDpnMidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnMidRowStatusEntry 2 } rtgDpnMidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnMid tables." ::= { rtgDpnMidRowStatusEntry 4 } rtgDpnMidIndex OBJECT-TYPE SYNTAX Integer32 (0..2046) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMid tables." ::= { rtgDpnMidRowStatusEntry 10 } rtgDpnMidOperTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is maintained by DpnAddressPlan component to provide information about the MIDs reachable, or once reachable, through the local RID subnet." ::= { rtgDpnMid 10 } rtgDpnMidOperEntry OBJECT-TYPE SYNTAX RtgDpnMidOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidOperTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex } ::= { rtgDpnMidOperTable 1 } RtgDpnMidOperEntry ::= SEQUENCE { rtgDpnMidSubstituteRid Unsigned32 } rtgDpnMidSubstituteRid OBJECT-TYPE SYNTAX Unsigned32 (1..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the substitute RID in use for the MID. This RID will be substituted for the RID in DPN packets destined to the local node's RID and the MID in question when the MID is unreachable (when, for example, all links to an AM from the Passport subnet are down). It will also be used in the case where the path through the substitute RID is better than that available through the subnet's connection to the cluster containing the AM MID. Substitute RIDs are learned from AM clusters that are supported by two RIDs (the Passport subnet's RID and another one). The operator can check this value to determine if a possible back up route to an AM exists. When there are no delayNextHopLinkGroups or tputNextHopLinkGroups shown to reach the MID, the substitute RID will be used. A value of 128 indicates that no substitute RID is known." DEFVAL { 128 } ::= { rtgDpnMidOperEntry 3 } rtgDpnMidDelayNextHopLinkGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidDelayNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination MID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an AM. If no link groups are listed then the destination is not reachable in the delay class of service (except in the case of the local node's MID, or when a substitute RID path is available). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it." ::= { rtgDpnMid 228 } rtgDpnMidDelayNextHopLinkGroupsEntry OBJECT-TYPE SYNTAX RtgDpnMidDelayNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidDelayNextHopLinkGroupsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex, rtgDpnMidDelayNextHopLinkGroupsIndex } ::= { rtgDpnMidDelayNextHopLinkGroupsTable 1 } RtgDpnMidDelayNextHopLinkGroupsEntry ::= SEQUENCE { rtgDpnMidDelayNextHopLinkGroupsIndex Integer32, rtgDpnMidDelayNextHopLinkGroupsValue RowPointer } rtgDpnMidDelayNextHopLinkGroupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMidDelayNextHopLinkGroupsTable." ::= { rtgDpnMidDelayNextHopLinkGroupsEntry 1 } rtgDpnMidDelayNextHopLinkGroupsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnMidDelayNextHopLinkGroupsTable." ::= { rtgDpnMidDelayNextHopLinkGroupsEntry 2 } rtgDpnMidTputNextHopLinkGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidTputNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination MID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an AM. If no link groups are listed then the destination is not reachable in the throughput class of service (except in the case of the local node's MID, or when a substitute RID path is available). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it." ::= { rtgDpnMid 229 } rtgDpnMidTputNextHopLinkGroupsEntry OBJECT-TYPE SYNTAX RtgDpnMidTputNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidTputNextHopLinkGroupsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex, rtgDpnMidTputNextHopLinkGroupsIndex } ::= { rtgDpnMidTputNextHopLinkGroupsTable 1 } RtgDpnMidTputNextHopLinkGroupsEntry ::= SEQUENCE { rtgDpnMidTputNextHopLinkGroupsIndex Integer32, rtgDpnMidTputNextHopLinkGroupsValue RowPointer } rtgDpnMidTputNextHopLinkGroupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMidTputNextHopLinkGroupsTable." ::= { rtgDpnMidTputNextHopLinkGroupsEntry 1 } rtgDpnMidTputNextHopLinkGroupsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnMidTputNextHopLinkGroupsTable." ::= { rtgDpnMidTputNextHopLinkGroupsEntry 2 } rtgDpnMidDelayMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidDelayMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the delay metrics of up to two paths to the destination MID. The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links (or estimated delays for links to AMs) in the path to the destination. It is computed for every possible path to the destination and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the MID is unreachable in the delay class of service (though it might still be reachable via its substitute RID). A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination.A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's MID." ::= { rtgDpnMid 330 } rtgDpnMidDelayMetricEntry OBJECT-TYPE SYNTAX RtgDpnMidDelayMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidDelayMetricTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex, rtgDpnMidDelayMetricIndex } ::= { rtgDpnMidDelayMetricTable 1 } RtgDpnMidDelayMetricEntry ::= SEQUENCE { rtgDpnMidDelayMetricIndex Integer32, rtgDpnMidDelayMetricValue Unsigned32 } rtgDpnMidDelayMetricIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMidDelayMetricTable." ::= { rtgDpnMidDelayMetricEntry 1 } rtgDpnMidDelayMetricValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnMidDelayMetricTable." ::= { rtgDpnMidDelayMetricEntry 2 } rtgDpnMidTputMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidTputMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the throughput metrics to the destination MID. The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links (or estimated bandwidth for links to AMs) in the path to the destination. It is computed for every possible path to the destination and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the MID is unreachable in the throughput class of service (though it might still be reachable via its substitute RID). A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID." ::= { rtgDpnMid 331 } rtgDpnMidTputMetricEntry OBJECT-TYPE SYNTAX RtgDpnMidTputMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidTputMetricTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex, rtgDpnMidTputMetricIndex } ::= { rtgDpnMidTputMetricTable 1 } RtgDpnMidTputMetricEntry ::= SEQUENCE { rtgDpnMidTputMetricIndex Integer32, rtgDpnMidTputMetricValue Unsigned32 } rtgDpnMidTputMetricIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMidTputMetricTable." ::= { rtgDpnMidTputMetricEntry 1 } rtgDpnMidTputMetricValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnMidTputMetricTable." ::= { rtgDpnMidTputMetricEntry 2 } rtgDpnMidDelayPathTrafficProportionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidDelayPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs)." ::= { rtgDpnMid 332 } rtgDpnMidDelayPathTrafficProportionsEntry OBJECT-TYPE SYNTAX RtgDpnMidDelayPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidDelayPathTrafficProportionsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex, rtgDpnMidDelayPathTrafficProportionsIndex } ::= { rtgDpnMidDelayPathTrafficProportionsTable 1 } RtgDpnMidDelayPathTrafficProportionsEntry ::= SEQUENCE { rtgDpnMidDelayPathTrafficProportionsIndex Integer32, rtgDpnMidDelayPathTrafficProportionsValue Unsigned32 } rtgDpnMidDelayPathTrafficProportionsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMidDelayPathTrafficProportionsTable." ::= { rtgDpnMidDelayPathTrafficProportionsEntry 1 } rtgDpnMidDelayPathTrafficProportionsValue OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnMidDelayPathTrafficProportionsTable." ::= { rtgDpnMidDelayPathTrafficProportionsEntry 2 } rtgDpnMidTputPathTrafficProportionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnMidTputPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs)." ::= { rtgDpnMid 333 } rtgDpnMidTputPathTrafficProportionsEntry OBJECT-TYPE SYNTAX RtgDpnMidTputPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnMidTputPathTrafficProportionsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnMidIndex, rtgDpnMidTputPathTrafficProportionsIndex } ::= { rtgDpnMidTputPathTrafficProportionsTable 1 } RtgDpnMidTputPathTrafficProportionsEntry ::= SEQUENCE { rtgDpnMidTputPathTrafficProportionsIndex Integer32, rtgDpnMidTputPathTrafficProportionsValue Unsigned32 } rtgDpnMidTputPathTrafficProportionsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnMidTputPathTrafficProportionsTable." ::= { rtgDpnMidTputPathTrafficProportionsEntry 1 } rtgDpnMidTputPathTrafficProportionsValue OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnMidTputPathTrafficProportionsTable." ::= { rtgDpnMidTputPathTrafficProportionsEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Routing Dpn ReachableCallServerInfo/ -- This component is a dynamic subcomponent of the -- DpnAddressPlan. It provides information about the Call Server -- functions, supported by one of the up to two Call Server Resource -- Modules, that are reachable. -- -- The information is accessed by specifying one of the following -- abbreviated names: -- scr - Source Call Routing Agent -- dcr - Destination Call Routing Agent -- gscr - Gateway Source Call Router Server -- gdcr - Gateway Destination Call Router Server -- grman - Gateway Call Routing Manager -- crd - Call Redirection Remote Server Interface -- lcr - (Limping) Call Redirection Server -- nui - Network User Identifier Remote Server Interface -- lnui - (Limping) Network User Identifier -- npm - Network Process Monitor System rtgDpnCs OBJECT IDENTIFIER ::= { rtgDpn 4 } rtgDpnCsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgDpnCs components." ::= { rtgDpnCs 1 } rtgDpnCsRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnCsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnCs component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex } ::= { rtgDpnCsRowStatusTable 1 } RtgDpnCsRowStatusEntry ::= SEQUENCE { rtgDpnCsRowStatus RowStatus, rtgDpnCsComponentName DisplayString, rtgDpnCsStorageType StorageType, rtgDpnCsIndex INTEGER } rtgDpnCsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnCs components. These components cannot be added nor deleted." ::= { rtgDpnCsRowStatusEntry 1 } rtgDpnCsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnCsRowStatusEntry 2 } rtgDpnCsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnCs tables." ::= { rtgDpnCsRowStatusEntry 4 } rtgDpnCsIndex OBJECT-TYPE SYNTAX INTEGER { dcr(1), nui(4), crd(5), lnui(6), scr(7), npm(8), grman(10), gscr(11), gdcr(12), lcr(14) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCs tables." ::= { rtgDpnCsRowStatusEntry 10 } rtgDpnCsDelayNextHopLinkGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsDelayNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the Call Server Resource Module (CSRM) supporting the server. DPN server traffic will be load shared across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to a CSRM. If no link groups are listed then the server is not reachable in the delay class of service. Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it." ::= { rtgDpnCs 230 } rtgDpnCsDelayNextHopLinkGroupsEntry OBJECT-TYPE SYNTAX RtgDpnCsDelayNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCsDelayNextHopLinkGroupsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex, rtgDpnCsDelayNextHopLinkGroupsIndex } ::= { rtgDpnCsDelayNextHopLinkGroupsTable 1 } RtgDpnCsDelayNextHopLinkGroupsEntry ::= SEQUENCE { rtgDpnCsDelayNextHopLinkGroupsIndex Integer32, rtgDpnCsDelayNextHopLinkGroupsValue RowPointer } rtgDpnCsDelayNextHopLinkGroupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCsDelayNextHopLinkGroupsTable." ::= { rtgDpnCsDelayNextHopLinkGroupsEntry 1 } rtgDpnCsDelayNextHopLinkGroupsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnCsDelayNextHopLinkGroupsTable." ::= { rtgDpnCsDelayNextHopLinkGroupsEntry 2 } rtgDpnCsTputNextHopLinkGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsTputNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is either the next hop in the path to the Call Server Resource Module (CSRM) supporting the server. DPN server traffic will be load shared across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to the CSRM. If no link groups are listed then the server is not reachable in the throughput class of service. Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it." ::= { rtgDpnCs 231 } rtgDpnCsTputNextHopLinkGroupsEntry OBJECT-TYPE SYNTAX RtgDpnCsTputNextHopLinkGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCsTputNextHopLinkGroupsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex, rtgDpnCsTputNextHopLinkGroupsIndex } ::= { rtgDpnCsTputNextHopLinkGroupsTable 1 } RtgDpnCsTputNextHopLinkGroupsEntry ::= SEQUENCE { rtgDpnCsTputNextHopLinkGroupsIndex Integer32, rtgDpnCsTputNextHopLinkGroupsValue RowPointer } rtgDpnCsTputNextHopLinkGroupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCsTputNextHopLinkGroupsTable." ::= { rtgDpnCsTputNextHopLinkGroupsEntry 1 } rtgDpnCsTputNextHopLinkGroupsValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnCsTputNextHopLinkGroupsTable." ::= { rtgDpnCsTputNextHopLinkGroupsEntry 2 } rtgDpnCsDelayMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsDelayMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the delay metrics of up to two paths to the server supported on a Call Server Resource Module (CSRM). The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links in the path to the CSRM supporting the server. It is computed for every possible path to the server and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the server is unreachable in the delay class of service. A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination. A value of 0 indicates that no cost is associated with the path to the destination." ::= { rtgDpnCs 334 } rtgDpnCsDelayMetricEntry OBJECT-TYPE SYNTAX RtgDpnCsDelayMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCsDelayMetricTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex, rtgDpnCsDelayMetricIndex } ::= { rtgDpnCsDelayMetricTable 1 } RtgDpnCsDelayMetricEntry ::= SEQUENCE { rtgDpnCsDelayMetricIndex Integer32, rtgDpnCsDelayMetricValue Unsigned32 } rtgDpnCsDelayMetricIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCsDelayMetricTable." ::= { rtgDpnCsDelayMetricEntry 1 } rtgDpnCsDelayMetricValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnCsDelayMetricTable." ::= { rtgDpnCsDelayMetricEntry 2 } rtgDpnCsTputMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsTputMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the throughput metrics of up to two paths to reach the server supported on a Call Server Resource Module (CSRM). The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links in the path to the CSRM supporting the server. It is computed for every possible path to the server and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the server is unreachable in the throughput class of service. A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination." ::= { rtgDpnCs 335 } rtgDpnCsTputMetricEntry OBJECT-TYPE SYNTAX RtgDpnCsTputMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCsTputMetricTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex, rtgDpnCsTputMetricIndex } ::= { rtgDpnCsTputMetricTable 1 } RtgDpnCsTputMetricEntry ::= SEQUENCE { rtgDpnCsTputMetricIndex Integer32, rtgDpnCsTputMetricValue Unsigned32 } rtgDpnCsTputMetricIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCsTputMetricTable." ::= { rtgDpnCsTputMetricEntry 1 } rtgDpnCsTputMetricValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnCsTputMetricTable." ::= { rtgDpnCsTputMetricEntry 2 } rtgDpnCsDelayPathTrafficProportionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsDelayPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs)." ::= { rtgDpnCs 336 } rtgDpnCsDelayPathTrafficProportionsEntry OBJECT-TYPE SYNTAX RtgDpnCsDelayPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCsDelayPathTrafficProportionsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex, rtgDpnCsDelayPathTrafficProportionsIndex } ::= { rtgDpnCsDelayPathTrafficProportionsTable 1 } RtgDpnCsDelayPathTrafficProportionsEntry ::= SEQUENCE { rtgDpnCsDelayPathTrafficProportionsIndex Integer32, rtgDpnCsDelayPathTrafficProportionsValue Unsigned32 } rtgDpnCsDelayPathTrafficProportionsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCsDelayPathTrafficProportionsTable." ::= { rtgDpnCsDelayPathTrafficProportionsEntry 1 } rtgDpnCsDelayPathTrafficProportionsValue OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnCsDelayPathTrafficProportionsTable." ::= { rtgDpnCsDelayPathTrafficProportionsEntry 2 } rtgDpnCsTputPathTrafficProportionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnCsTputPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs)." ::= { rtgDpnCs 337 } rtgDpnCsTputPathTrafficProportionsEntry OBJECT-TYPE SYNTAX RtgDpnCsTputPathTrafficProportionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnCsTputPathTrafficProportionsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnCsIndex, rtgDpnCsTputPathTrafficProportionsIndex } ::= { rtgDpnCsTputPathTrafficProportionsTable 1 } RtgDpnCsTputPathTrafficProportionsEntry ::= SEQUENCE { rtgDpnCsTputPathTrafficProportionsIndex Integer32, rtgDpnCsTputPathTrafficProportionsValue Unsigned32 } rtgDpnCsTputPathTrafficProportionsIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnCsTputPathTrafficProportionsTable." ::= { rtgDpnCsTputPathTrafficProportionsEntry 1 } rtgDpnCsTputPathTrafficProportionsValue OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the rtgDpnCsTputPathTrafficProportionsTable." ::= { rtgDpnCsTputPathTrafficProportionsEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Routing Dpn LocalLinkGroups/ -- This component is a dynamic subcomponent of the -- DpnAddressPlan. It provides information about the support of -- external gateways to RMs and AMs connected to this Passport -- node. rtgDpnLg OBJECT IDENTIFIER ::= { rtgDpn 5 } rtgDpnLgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnLgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgDpnLg components." ::= { rtgDpnLg 1 } rtgDpnLgRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnLgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnLg component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnLgIndex } ::= { rtgDpnLgRowStatusTable 1 } RtgDpnLgRowStatusEntry ::= SEQUENCE { rtgDpnLgRowStatus RowStatus, rtgDpnLgComponentName DisplayString, rtgDpnLgStorageType StorageType, rtgDpnLgIndex AsciiStringIndex } rtgDpnLgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnLg components. These components cannot be added nor deleted." ::= { rtgDpnLgRowStatusEntry 1 } rtgDpnLgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnLgRowStatusEntry 2 } rtgDpnLgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnLg tables." ::= { rtgDpnLgRowStatusEntry 4 } rtgDpnLgIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..12)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnLg tables." ::= { rtgDpnLgRowStatusEntry 10 } rtgDpnLgOperTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnLgOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes provides information about the gateways in use to reach Passports, RMs and AMs connected to this Passport node." ::= { rtgDpnLg 3 } rtgDpnLgOperEntry OBJECT-TYPE SYNTAX RtgDpnLgOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnLgOperTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnLgIndex } ::= { rtgDpnLgOperTable 1 } RtgDpnLgOperEntry ::= SEQUENCE { rtgDpnLgFarEndType INTEGER, rtgDpnLgFarEndRid Unsigned32, rtgDpnLgFarEndMid Unsigned32, rtgDpnLgDelayMetric Unsigned32, rtgDpnLgTputMetric Unsigned32 } rtgDpnLgFarEndType OBJECT-TYPE SYNTAX INTEGER { em(0), rm(1), am(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the type of the far end module (EM, AM or RM)." ::= { rtgDpnLgOperEntry 1 } rtgDpnLgFarEndRid OBJECT-TYPE SYNTAX Unsigned32 (1..126) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the far end neighbor RID. If the neighbor is an AM then the RID is that of the Passport node." ::= { rtgDpnLgOperEntry 2 } rtgDpnLgFarEndMid OBJECT-TYPE SYNTAX Unsigned32 (1..1910) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the far end neighbor MID." ::= { rtgDpnLgOperEntry 3 } rtgDpnLgDelayMetric OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the delay metric calculated for the link group. If the type of the far end switch is AM, the delay metric is calculated for MID routing, ranging from 1 to 2147483647. If the type of the far end switch is EM or RM, the delay metric, ranging from 1 to 255, is based on the measured round trip delay of the delay preferred links in the group. A link group with a low metric value is preferable to one with a higher value as it is associated with lower delay facilities." ::= { rtgDpnLgOperEntry 4 } rtgDpnLgTputMetric OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the throughput metric calculated for the link group. If the type of the far end switch is AM, the throughput metric is calculated for MID routing, ranging from 1 to 2147483647. If the type of the far end switch is EM or RM, the throughput metric, ranging from 1 to 255, is based on the sum of the bandwidth available for all links in the group. A link group with a low metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities." ::= { rtgDpnLgOperEntry 5 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Routing Dpn LpStatistics/n -- This component provides DPN packet forwarding statistics for the -- LP identified by this component instance. rtgDpnLpStats OBJECT IDENTIFIER ::= { rtgDpn 6 } rtgDpnLpStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnLpStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgDpnLpStats components." ::= { rtgDpnLpStats 1 } rtgDpnLpStatsRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnLpStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnLpStats component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnLpStatsIndex } ::= { rtgDpnLpStatsRowStatusTable 1 } RtgDpnLpStatsRowStatusEntry ::= SEQUENCE { rtgDpnLpStatsRowStatus RowStatus, rtgDpnLpStatsComponentName DisplayString, rtgDpnLpStatsStorageType StorageType, rtgDpnLpStatsIndex Integer32 } rtgDpnLpStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnLpStats components. These components cannot be added nor deleted." ::= { rtgDpnLpStatsRowStatusEntry 1 } rtgDpnLpStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnLpStatsRowStatusEntry 2 } rtgDpnLpStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnLpStats tables." ::= { rtgDpnLpStatsRowStatusEntry 4 } rtgDpnLpStatsIndex OBJECT-TYPE SYNTAX Integer32 (0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnLpStats tables." ::= { rtgDpnLpStatsRowStatusEntry 10 } rtgDpnLpStatsFwdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnLpStatsFwdStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes provides DPN packet forwarding statistics for this LP. The statistics can be used to monitor the connectionless traffic profile on this LP." ::= { rtgDpnLpStats 10 } rtgDpnLpStatsFwdStatsEntry OBJECT-TYPE SYNTAX RtgDpnLpStatsFwdStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnLpStatsFwdStatsTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnLpStatsIndex } ::= { rtgDpnLpStatsFwdStatsTable 1 } RtgDpnLpStatsFwdStatsEntry ::= SEQUENCE { rtgDpnLpStatsTotalPackets PassportCounter64, rtgDpnLpStatsThroughputPackets PassportCounter64, rtgDpnLpStatsDelayPackets PassportCounter64, rtgDpnLpStatsNormalReliabilityPackets PassportCounter64, rtgDpnLpStatsHighReliabilityPackets PassportCounter64, rtgDpnLpStatsDiscardNoRoute PassportCounter64, rtgDpnLpStatsInterruptingPackets PassportCounter64, rtgDpnLpStatsDiscardLpCongested PassportCounter64 } rtgDpnLpStatsTotalPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of delay and throughput packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 1 } rtgDpnLpStatsThroughputPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the throughput packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 2 } rtgDpnLpStatsDelayPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the delay packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 3 } rtgDpnLpStatsNormalReliabilityPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the normal reliability packets handled by DPN packet forwarding on this LP when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 4 } rtgDpnLpStatsHighReliabilityPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the high reliability packets handled by DPN packet forwarding on this LP when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 5 } rtgDpnLpStatsDiscardNoRoute OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the packets discarded when DPN packet forwarding has failed to find a route to forward the packets on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 6 } rtgDpnLpStatsInterruptingPackets OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of multimedia packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 7 } rtgDpnLpStatsDiscardLpCongested OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the packets that have been discarded by DPN packet forwarding, on the entire module, due to congestion on this LP. This value is the sum of the packets discarded by all LPs due to insufficient shared memory on this one. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded." ::= { rtgDpnLpStatsFwdStatsEntry 8 } -- Routing Dpn RidFilterInfo/ -- This component maintains information related to the filtering of -- RID reachability information in Routing Table Updates (RTUs) sent -- to and received from the instance RID. rtgDpnRidFilter OBJECT IDENTIFIER ::= { rtgDpn 7 } rtgDpnRidFilterRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidFilterRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of rtgDpnRidFilter components." ::= { rtgDpnRidFilter 1 } rtgDpnRidFilterRowStatusEntry OBJECT-TYPE SYNTAX RtgDpnRidFilterRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rtgDpnRidFilter component." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidFilterIndex } ::= { rtgDpnRidFilterRowStatusTable 1 } RtgDpnRidFilterRowStatusEntry ::= SEQUENCE { rtgDpnRidFilterRowStatus RowStatus, rtgDpnRidFilterComponentName DisplayString, rtgDpnRidFilterStorageType StorageType, rtgDpnRidFilterIndex Integer32 } rtgDpnRidFilterRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rtgDpnRidFilter components. These components can be added and deleted." ::= { rtgDpnRidFilterRowStatusEntry 1 } rtgDpnRidFilterComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rtgDpnRidFilterRowStatusEntry 2 } rtgDpnRidFilterStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rtgDpnRidFilter tables." ::= { rtgDpnRidFilterRowStatusEntry 4 } rtgDpnRidFilterIndex OBJECT-TYPE SYNTAX Integer32 (1..126) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rtgDpnRidFilter tables." ::= { rtgDpnRidFilterRowStatusEntry 10 } rtgDpnRidFilterImportRidListTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidFilterImportRidListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies the list of RIDs whose reachability information will be accepted from the instance RID. Information about RIDs which do not appear in this list will be ignored and this node considers those RIDs to be unreachable from the instance RID. Note that this also applies to the instance RID itself, that is, if the instance RID does not appear in the import list, this node considers the instance RID to be unreachable from the instance RID. By default this list contains all valid RIDs, meaning that information about all RIDs will be accepted from the instance RID. When this list is empty, no RID information is accepted from the instance RID, therefore, no RID traffic will be routed to it. A warning is generated when an empty import list is detected. RID 127 is the Network Services Sharing (NSS) RID, used to identify DPN-100 nodes running call servers which can be used for remote call processing. This RID can be filtered like any other using the import RID list." ::= { rtgDpnRidFilter 303 } rtgDpnRidFilterImportRidListEntry OBJECT-TYPE SYNTAX RtgDpnRidFilterImportRidListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidFilterImportRidListTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidFilterIndex, rtgDpnRidFilterImportRidListValue } ::= { rtgDpnRidFilterImportRidListTable 1 } RtgDpnRidFilterImportRidListEntry ::= SEQUENCE { rtgDpnRidFilterImportRidListValue Integer32, rtgDpnRidFilterImportRidListRowStatus RowStatus } rtgDpnRidFilterImportRidListValue OBJECT-TYPE SYNTAX Integer32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the rtgDpnRidFilterImportRidListTable." ::= { rtgDpnRidFilterImportRidListEntry 1 } rtgDpnRidFilterImportRidListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the rtgDpnRidFilterImportRidListTable." ::= { rtgDpnRidFilterImportRidListEntry 2 } rtgDpnRidFilterExportRidListTable OBJECT-TYPE SYNTAX SEQUENCE OF RtgDpnRidFilterExportRidListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies the list of RIDs whose true reachability is advertised to the instance RID. RIDs which do not appear in this list are advertised to the instance RID as being unreachable from this node. By default, this list contains all valid RIDs, meaning that true reachability information for all RIDs is advertised to the instance RID. When this list is empty, all RIDs will be advertised to the instance RID as unreachable, including this node's own RID, therefore the instance RID will not route any RID traffic to this RID. A warning is generated when an empty export list is detected. RID 127 is the Network Services Sharing (NSS) RID, used to identify DPN-100 nodes running call servers which can be used for remote call processing. This RID can be filtered like any other using the import RID list." ::= { rtgDpnRidFilter 304 } rtgDpnRidFilterExportRidListEntry OBJECT-TYPE SYNTAX RtgDpnRidFilterExportRidListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rtgDpnRidFilterExportRidListTable." INDEX { rtgIndex, rtgDpnIndex, rtgDpnRidFilterIndex, rtgDpnRidFilterExportRidListValue } ::= { rtgDpnRidFilterExportRidListTable 1 } RtgDpnRidFilterExportRidListEntry ::= SEQUENCE { rtgDpnRidFilterExportRidListValue Integer32, rtgDpnRidFilterExportRidListRowStatus RowStatus } rtgDpnRidFilterExportRidListValue OBJECT-TYPE SYNTAX Integer32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the rtgDpnRidFilterExportRidListTable." ::= { rtgDpnRidFilterExportRidListEntry 1 } rtgDpnRidFilterExportRidListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the rtgDpnRidFilterExportRidListTable." ::= { rtgDpnRidFilterExportRidListEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { rtgDpnMidStorageType, -- rtgDpnSubnetMidsValue, -- rtgDpnTotalPackets, -- rtgDpnRidDpnDelayMetric, -- rtgDpnLpStatsHighReliabilityPackets, -- rtgDpnRidTputMetricValue, -- rtgDpnRidDpnTputMetric, -- rtgDpnLpStatsThroughputPackets, -- rtgDpnRidFilterRowStatus, -- rtgDpnRidDelayPathTrafficProportionsValue, -- rtgDpnLgFarEndRid, -- rtgDpnRidMidRowStatus, -- rtgDpnMidDelayNextHopLinkGroupsValue, -- rtgDpnDelayMetricCutOff, -- rtgDpnRidTputPathTrafficProportionsValue, -- rtgDpnNormalReliabilityPackets, -- rtgDpnLpStatsDelayPackets, -- rtgDpnMidTputNextHopLinkGroupsValue, -- rtgDpnRidDelayMetricValue, -- rtgDpnLgStorageType, -- rtgDpnLpStatsDiscardNoRoute, -- rtgDpnMidRowStatus, -- rtgDpnControlBytesTx, -- rtgDpnRidFilterExportRidListRowStatus, -- rtgDpnHighReliabilityPackets, -- rtgDpnCsTputNextHopLinkGroupsValue, -- rtgDpnRidFilterComponentName, -- rtgDpnForwardingPolicy, -- rtgDpnRidMidComponentName, -- rtgDpnCsRowStatus, -- rtgDpnStorageType, -- rtgDpnControlPktTx, -- rtgDpnCsDelayNextHopLinkGroupsValue, -- rtgDpnLgTputMetric, -- rtgDpnRoutingId, -- rtgDpnRidDelayNextHopLinkGroupsValue, -- rtgDpnLgFarEndMid, -- rtgDpnMidComponentName, -- rtgDpnRidTputNextHopLinkGroupsValue, -- rtgDpnInterruptingPackets, -- rtgDpnCsTputPathTrafficProportionsValue, -- rtgDpnMidTputPathTrafficProportionsValue, -- rtgDpnRidRowStatus, -- rtgDpnLgFarEndType, -- rtgDpnCsComponentName, -- rtgDpnLgDelayMetric, -- rtgDpnLpStatsRowStatus, -- rtgDpnCsStorageType, -- rtgDpnCallServerModuleRidsValue, -- rtgDpnOutOfSequencePkt, -- rtgDpnRowStatus, -- rtgDpnRidStorageType, -- rtgDpnDiscardNoRoute, -- rtgDpnLpStatsDiscardLpCongested, -- rtgDpnMidSubstituteRid, -- rtgDpnControlPktRx, -- rtgDpnRidFilterExportRidListValue, -- rtgDpnDelayMetricRangeBoundary, -- rtgDpnLgComponentName, -- rtgDpnRidComponentName, -- rtgDpnRidFilterImportRidListValue, -- rtgDpnTputMetricRangeBoundary, -- rtgDpnDelayPackets, -- rtgDpnLpStatsComponentName, -- rtgDpnLpStatsInterruptingPackets, -- rtgDpnThroughputMetricCutOff, -- rtgDpnMidDelayMetricValue, -- rtgDpnLgRowStatus, -- rtgDpnComponentName, -- rtgDpnLpStatsNormalReliabilityPackets, -- rtgDpnMidTputMetricValue, -- rtgDpnDiscardLpCongested, -- rtgDpnRidFilterStorageType, -- rtgDpnMidDelayPathTrafficProportionsValue, -- rtgDpnVarianceValue, -- rtgDpnRidMidStorageType, -- rtgDpnLpStatsTotalPackets, -- rtgDpnControlBytesRx, -- rtgDpnCsTputMetricValue, -- rtgDpnLogicalNetworkNumber, -- rtgDpnModuleId, -- rtgDpnRidFilterImportRidListRowStatus, -- rtgDpnCsDelayPathTrafficProportionsValue, -- rtgDpnLpStatsStorageType, -- rtgDpnCsDelayMetricValue, -- rtgDpnThroughputPackets } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." dpnRoutingGroup OBJECT IDENTIFIER ::= { dpnRoutingMIB 1 } dpnRoutingGroupBE OBJECT IDENTIFIER ::= { dpnRoutingGroup 5 } dpnRoutingGroupBE01 OBJECT IDENTIFIER ::= { dpnRoutingGroupBE 2 } dpnRoutingGroupBE01A OBJECT IDENTIFIER ::= { dpnRoutingGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 DpnRouting." -- STATUS mandatory -- DESCRIPTION "DpnRouting MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-DpnRoutingMIB -- INCLUDES { dpnRoutingGroupBE01A } dpnRoutingCapabilities OBJECT IDENTIFIER ::= { dpnRoutingMIB 3 } dpnRoutingCapabilitiesBE OBJECT IDENTIFIER ::= { dpnRoutingCapabilities 5 } dpnRoutingCapabilitiesBE01 OBJECT IDENTIFIER ::= { dpnRoutingCapabilitiesBE 2 } dpnRoutingCapabilitiesBE01A OBJECT IDENTIFIER ::= { dpnRoutingCapabilitiesBE01 2 } END