-- *****************************************************************
-- MY-ACL-MIB.mib:  My Authentication Key MIB file
--
-- $Copyright$
-- 
-- *****************************************************************
--

MY-AUTHEN-KEY-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        NOTIFICATION-TYPE,
        Integer32,
        Counter32
                FROM SNMPv2-SMI
        TruthValue,
        DisplayString,
        RowStatus,
        MacAddress,
        DateAndTime
                FROM SNMPv2-TC
        MODULE-COMPLIANCE,
        OBJECT-GROUP
                FROM SNMPv2-CONF
        IfIndex,
        ConfigStatus
                FROM MY-TC        
        myMgmt
                FROM MY-SMI;

myAuthenKeyMIB MODULE-IDENTITY
        LAST-UPDATED "200203200000Z"
        ORGANIZATION "$Company$"
        CONTACT-INFO
                " 
                Tel: $Telephone$ 

                E-mail: $E-mail$"
        DESCRIPTION
                "This module defines authentication key managment mibs."
        REVISION      "200203200000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { myMgmt 24}



myAuthenKeyMIBObjects OBJECT IDENTIFIER ::= { myAuthenKeyMIB 1 }


MyKeyTimeMode ::= TEXTUAL-CONVENTION        
   STATUS current                          
   DESCRIPTION                             
            "Time managment mode of key." 
   SYNTAX INTEGER {                        
            infinite(1), -- Key will be valid all along when the key start to become effective
            duration(2), -- Key will be valid for designate duration when the key start to 
                         -- become effective.  
            end-time(3)  -- Key will be valid when the key start to become effective till
                         -- designate end time reach.                           
  }                        
  
--    Key management is a method of controlling authentication keys used by some protocol. Not 
-- all protocols can use key management. To manage authentication keys, define a  key chain, 
-- identify the keys that belong to the key chain, and specify how long each key is valid. Each
-- key has its own key identifier (specified with the key chain and key number),
-- which is stored locally. 
--     The combination of the key identifier and the interface associated with the message
-- uniquely identifies the authentication algorithm and Message Digest 5 (MD5) authentication
-- key in use.
--     You can configure multiple keys with life times. Only one authentication packet is sent,
-- regardless of how many valid keys exist. The software examines the key numbers in order from
-- lowest to highest, and uses the first valid key it encounters. The lifetimes allow for 
-- overlap during key changes. Note that the router must know these lifetimes.

myAuthenKeyChainTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MyAuthenKeyChainEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "A table of key chain entries."
        ::= { myAuthenKeyMIBObjects 1 }
    
myAuthenKeyChainEntry OBJECT-TYPE
        SYNTAX MyAuthenKeyChainEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry contains key chain."  
        INDEX { myAuthenKeyChainName }
        ::= { myAuthenKeyChainTable 1 }
        
MyAuthenKeyChainEntry ::= 
        SEQUENCE {
                myAuthenKeyChainName DisplayString,
                myAuthenKeyChainEntryStatus ConfigStatus
        } 
           
myAuthenKeyChainName OBJECT-TYPE
        SYNTAX DisplayString(SIZE (1..32))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Key chain name of this entry.This value is unique for every entry
            When this string be used as an index,Value of a sub-identifier equal 
            ASCII value of corresponding character(first sub-identifier corresponds
            first character of string). The number of sub-identifiers of this string
            must be 32,If length of string is less than 32 the sub-identifier(0x0) 
            will be filled in tail."
        ::= { myAuthenKeyChainEntry  1 }
                
myAuthenKeyChainEntryStatus OBJECT-TYPE
        SYNTAX ConfigStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Status of this entry, set its value to invalid will delete this entry.
            set its value to valid has no effect."
        ::= { myAuthenKeyChainEntry 2 }


myAuthenKeyTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MyAuthenKeyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "A table of authentication key entries."
        ::= { myAuthenKeyMIBObjects 2 }
    
myAuthenKeyEntry OBJECT-TYPE
        SYNTAX MyAuthenKeyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry contains authentication key parameters.
                                
                We must set all specifies valid values for the 
                non-defaulted configuration objects, certainly, it should
                also modify  the default values for the other configuration 
                objects if the defaults are not appropriate.
                                       
                Once the appropriate instance of all the configuration
                objects have been created or set,the row status should be set
                to active to initiate the request."  
        INDEX { myKeyChainName,myAuthenKeyNumber }
        ::= { myAuthenKeyTable 1 }
        
MyAuthenKeyEntry ::= 
        SEQUENCE {
                myKeyChainName DisplayString,
                myAuthenKeyNumber Integer32,
                myKeyString DisplayString,
                myAuthenKeyReceiveMyTime DateAndTime,
                myAuthenKeyReceiveTimeMode MyKeyTimeMode,
                myAuthenKeyReceiveEndTime DateAndTime,
                myAuthenKeyReceiveDuration Unsigned32,
                myAuthenKeySendMyTime DateAndTime,
                myAuthenKeySendTimeMode MyKeyTimeMode,
                myAuthenKeySendEndTime DateAndTime,
                myAuthenKeySendDuration Unsigned32,
                myAuthenReceiveKeyState       INTEGER,
                myAuthenSendKeyState       INTEGER,
                myAuthenKeyEntryStauts RowStatus 
        }

myKeyChainName OBJECT-TYPE
        SYNTAX DisplayString(SIZE (1..32))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Key chain name of this key belong to which indentified in myAuthenKeyChainEntry.
            When this string be used as an index,Value of a sub-identifier equal 
            ASCII value of corresponding character(first sub-identifier corresponds
            first character of string). The number of sub-identifiers of this string
            must be 32,If length of string is less than 32 the sub-identifier(0x0) 
            will be filled in tail."
        ::= { myAuthenKeyEntry  1 }

myAuthenKeyNumber OBJECT-TYPE
        SYNTAX Integer32(0..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
               "The number identify a unique key in the key chain."
        ::= { myAuthenKeyEntry 2 }

myKeyString OBJECT-TYPE
        SYNTAX DisplayString(SIZE (1..80))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Key String of the key. The string can contain from 1 to
             80 uppercase and lowercase alphanumeric characters,
             but the first character cannot be a number."
        ::= { myAuthenKeyEntry  3 }
           
myAuthenKeyReceiveMyTime OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The start time which the key can be received."
        ::= { myAuthenKeyEntry 4 }
        
myAuthenKeyReceiveTimeMode OBJECT-TYPE
        SYNTAX MyKeyTimeMode
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The time mode of key receive."
        ::= { myAuthenKeyEntry 5 }

myAuthenKeyReceiveEndTime OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The end time which the key can be received."
        ::= { myAuthenKeyEntry 6 }

myAuthenKeyReceiveDuration OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The duration time which the key is valid, in units of second."
        ::= { myAuthenKeyEntry 7 }
        
myAuthenKeySendMyTime OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The start time which the key can be send."
        ::= { myAuthenKeyEntry 8 }
        
myAuthenKeySendTimeMode OBJECT-TYPE
        SYNTAX MyKeyTimeMode
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The time mode of key send."
        ::= { myAuthenKeyEntry 9 }

myAuthenKeySendEndTime OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The end time which the key can be send."
        ::= { myAuthenKeyEntry 10 }

myAuthenKeySendDuration OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The duration time which the key is valid,in units of second."
        ::= { myAuthenKeyEntry 11 }        

myAuthenReceiveKeyState OBJECT-TYPE
        SYNTAX INTEGER{
                  valid(1),
                  invalid(2)
               }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The key is valid or invalid currently for receiving."
        ::= { myAuthenKeyEntry 12 }        
        
myAuthenSendKeyState OBJECT-TYPE
        SYNTAX INTEGER{
                  valid(1),
                  invalid(2)
               }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The key is valid or invalid currently for sending."
        ::= { myAuthenKeyEntry 13 }        
                  
myAuthenKeyEntryStauts OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "entry status for this list."
        ::= { myAuthenKeyEntry 14 }
 
-- conformance information

myAuthenKeyChainMIBConformance OBJECT IDENTIFIER ::= { myAuthenKeyMIB 2 }
myAuthenKeyChainMIBCompliances OBJECT IDENTIFIER ::= { myAuthenKeyChainMIBConformance 1 }
myAuthenKeyChainMIBGroups      OBJECT IDENTIFIER ::= { myAuthenKeyChainMIBConformance 2 }


-- compliance statements

myAuthenKeyChainMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for entities which implement
                the My Acl MIB"
        MODULE  -- this module
                MANDATORY-GROUPS { myAuthenKeyChainMIBGroup }
        ::= { myAuthenKeyChainMIBCompliances 1 }
        
        
-- units of conformance

myAuthenKeyChainMIBGroup OBJECT-GROUP
        OBJECTS {
                myAuthenKeyChainName,
                myAuthenKeyChainEntryStatus,        
                myKeyChainName,
                myAuthenKeyNumber, 
                myKeyString, 
                myAuthenKeyReceiveMyTime ,
                myAuthenKeyReceiveTimeMode, 
                myAuthenKeyReceiveEndTime ,
                myAuthenKeyReceiveDuration, 
                myAuthenKeySendMyTime ,
                myAuthenKeySendTimeMode ,
                myAuthenKeySendEndTime ,
                myAuthenKeySendDuration, 
                myAuthenReceiveKeyState,
                myAuthenSendKeyState,
                myAuthenKeyEntryStauts 
        }
        STATUS  current
        DESCRIPTION
                "A collection of objects providing acl (echo) ability to a
                My agent."
        ::= { myAuthenKeyChainMIBGroups 1 }        
        
END