-- *****************************************************************
-- MY-IGMP-SNOOPING-MIB.mib:  My IGMP snooping MIB file
--
-- $Copyright$
-- 
-- *****************************************************************
--

MY-IGMP-SNOOPING-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        NOTIFICATION-TYPE,
        Integer32,
        Counter32,
        IpAddress
                FROM SNMPv2-SMI
        VlanId
                FROM Q-BRIDGE-MIB
        TruthValue,
        DisplayString,
        RowStatus,
        MacAddress
                FROM SNMPv2-TC
        MODULE-COMPLIANCE,
        OBJECT-GROUP,
        NOTIFICATION-GROUP
                FROM SNMPv2-CONF
        ConfigStatus,
        MemberMap,
        IfIndex
                FROM MY-TC
        EnabledStatus 
                FROM P-BRIDGE-MIB
        myMgmt
                FROM MY-SMI;

myIgmpSnoopingMIB MODULE-IDENTITY
        LAST-UPDATED "200203200000Z"
        ORGANIZATION "$Company$"
        CONTACT-INFO
                " 
                Tel: $Telephone$ 

                E-mail: $E-mail$"
        DESCRIPTION
                "This module defines my IGMP snooping mibs."
        REVISION      "200203200000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { myMgmt 8}

myIgmpSnoopingMIBObjects OBJECT IDENTIFIER ::= { myIgmpSnoopingMIB 1 }

    --
    -- my Snooping Igmp Group
    --
mySNIgmpWorkingMode OBJECT-TYPE
        SYNTAX INTEGER {
            disabled(1),
            svgl(2),    -- shared-vlan-group-learning(2),
            ivgl(3),    -- independent-vlan-group-learning(3)
            ivgl-svgl(4)-- svgl-and-ivgl-coexist(4)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "System IGMP snooping working mode:
             disabled(1):
                disable the snooping IGMP function, and all IGMP report or leave
                message will be forward transparent.
             svgl(2):
                shared vlan group learning, all group learning in each VLAN will 
                be awared of by other VLAN.
             ivgl(3):
                independent vlan group learning, all group learning by each VLAN
                cannot be used by other VLAN.
             ivgl-svgl(4):
                svgl-and-ivgl-coexist."                
        DEFVAL { disabled }
        ::= { myIgmpSnoopingMIBObjects 1 }

mySNIgmpSourcePortCheck OBJECT-TYPE
        SYNTAX EnabledStatus
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Only video flow of router port can be accept by switch when 
            this value is enabled"
        DEFVAL { disabled }
        ::= { myIgmpSnoopingMIBObjects 2 }
        
mySNIgmpSourceIpCheck OBJECT-TYPE
        SYNTAX EnabledStatus
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " "
        DEFVAL { disabled }
        ::= { myIgmpSnoopingMIBObjects 3 }        

mySNIgmpSourceIpCheckDefIp OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Default multicast server ip address of igmp source ip checking,
            this value must be setted before mySNIgmpSourceIpCheck be setted
            to enabled"
        ::= { myIgmpSnoopingMIBObjects 4 }

mySNIgmpSrcIpCheckTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MySNIgmpSrcIpCheckEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "table of igmp source Ip check."
        ::= { myIgmpSnoopingMIBObjects 5 }
    
mySNIgmpSrcIpCheckEntry OBJECT-TYPE
        SYNTAX MySNIgmpSrcIpCheckEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION 
            "list of igmp source Ip check"
        INDEX { mySNIgmpSrcIpCheckVID,mySNIgmpSrcIpCheckMultiIpAddr }
        ::= { mySNIgmpSrcIpCheckTable 1 }
    
MySNIgmpSrcIpCheckEntry ::= 
        SEQUENCE {
        mySNIgmpSrcIpCheckVID VlanId,
        mySNIgmpSrcIpCheckMultiIpAddr IpAddress,
        mySNIgmpSrcIpCheckSrcIpAddr IpAddress,
        mySNIgmpSrcIpCheckEntryStatus INTEGER
        }

mySNIgmpSrcIpCheckVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "VID of ipmc stream"
        ::= { mySNIgmpSrcIpCheckEntry 1 }
        
mySNIgmpSrcIpCheckMultiIpAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Group Destination Address for a ipmc stream."
        ::= { mySNIgmpSrcIpCheckEntry 2 }

mySNIgmpSrcIpCheckSrcIpAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The associate source ip of this ipmc stream. This Stream can be accepted only it's
            source ip address is mySNIgmpSrcIpCheckSrcIpAddr."
        ::= { mySNIgmpSrcIpCheckEntry 3 }
            
mySNIgmpSrcIpCheckEntryStatus OBJECT-TYPE
        SYNTAX INTEGER{
              valid(1),
              delete(2) 
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "entry status of this entry. Setting this value to 'delete' will delete this
             entry.Setting this value to value have no any effect"
        ::= { mySNIgmpSrcIpCheckEntry 4 } 
    
mySNIgmpPortTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MySNIgmpPortEntry
        MAX-ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "Port's configuration concerned with snooping IGMP"
        ::= { myIgmpSnoopingMIBObjects 6 }
        
mySNIgmpPortEntry OBJECT-TYPE
        SYNTAX MySNIgmpPortEntry
        MAX-ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION 
            "list of IGMP port configurations."
        INDEX { mySNIgmpPortRouterVID,mySNIgmpPortIndex }
        ::= { mySNIgmpPortTable 1 }
        
MySNIgmpPortEntry ::= 
        SEQUENCE {
        mySNIgmpPortRouterVID VlanId,        
        mySNIgmpPortIndex IfIndex,
        mySNIgmpPortRouterState INTEGER,
        mySNIgmpPortRouterProfile Unsigned32
        }
    
mySNIgmpPortRouterVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "the mroute port's vlan id"
        ::= { mySNIgmpPortEntry 1 }    
    
mySNIgmpPortIndex OBJECT-TYPE
        SYNTAX IfIndex
        MAX-ACCESS read-only
        STATUS mandatory
        DESCRIPTION     
            ""
        ::= { mySNIgmpPortEntry 2 }

mySNIgmpPortRouterState OBJECT-TYPE
        SYNTAX INTEGER{
           mrnone(1),
           mrstatic(2),
           mrdynamic(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "the mroute port's state,"
        ::= { mySNIgmpPortEntry 3 }        

mySNIgmpPortRouterProfile OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "the mroute port's profile."
        ::= { mySNIgmpPortEntry 4 }        
    

--mySNIgmpPortDefGroupsFilterBehavior OBJECT-TYPE
--        SYNTAX INTEGER {
--            forwardAllGroups(1),
--            forwardUnregisteredGroups (2),
--            filterUnregisteredGroups (3)
--        }
--        MAX-ACCESS read-write
--        STATUS current
--        DESCRIPTION
--         "Forwarding and filtering of group addressed frames may be managed by specifying 
--         defaults for each outbound Port. The behavior of each of these defaults, as modified
--         by the control elements of more explicit Filtering Database entries applicable to 
--         a given frame's MAC Address, reception Port, and outbound Port, is as follows.
--              a) Forward All Groups. The frame is forwarded, unless an explicit Static Filtering
--                 Entry specifies filtering independent of any dynamic filtering information.
--              b) Forward Unregistered Groups. The frame is forwarded, unless
--                 1) An explicit Static Filtering Entry specifies filtering independent 
--                    of any dynamic filtering information; or
--                 2) An explicit Static Filtering Entry specifies forwarding or filtering
--                    on the basis of dynamic filtering information, and an applicable explicit
--                     Group Registration Entry exists specifying filtering;or
--                 3) An applicable explicit Static Filtering Entry does not exist, but an 
--                    applicable Group Registration entry specifies filtering.
--              c) Filter Unregistered Groups. The frame is filtered unless
--                 1) An explicit Static Filtering Entry specifies forwarding independent of 
--                    any dynamic filtering information; or
--                 2) An explicit Static Filtering Entry specifies forwarding or filtering on
--                   the basis of dynamic filtering information, and an applicable explicit 
--                   Group Registration Entry exists specifying forwarding;or
--                 3) An applicable explicit Static Filtering Entry does not exist, but an 
--                    applicable Group Registration entry specifies forwarding."
--        ::= { mySNIgmpPortEntry 4 }

mySNIgmpGDANumber OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "max number of Group Destination Address this system supported."
        ::= { myIgmpSnoopingMIBObjects 7 }

mySNIgmpGDATable OBJECT-TYPE
        SYNTAX SEQUENCE OF MySNIgmpGDAEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "table of GDA."
        ::= { myIgmpSnoopingMIBObjects 8}
    
mySNIgmpGDAEntry OBJECT-TYPE
        SYNTAX MySNIgmpGDAEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION 
            "list of GDA of ports"
        INDEX { mySNIgmpGDAVID,mySNIgmpGDAAddr }
        ::= { mySNIgmpGDATable 1 }
    
MySNIgmpGDAEntry ::= 
        SEQUENCE {
        mySNIgmpGDAVID VlanId,
        mySNIgmpGDAAddr IpAddress,
        mySNIgmpGDAPortMemberAction MemberMap,
        mySNIgmpGDATrunkMemberAction MemberMap
--        mySNIgmpGDAStatus RowStatus
--        mySNIgmpGDAStatus INTEGER
        }

mySNIgmpGDAVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "VID of ipmc stream"
        ::= { mySNIgmpGDAEntry 1 }
        
mySNIgmpGDAAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Group Destination Address for a port."
        ::= { mySNIgmpGDAEntry 2 }
    
mySNIgmpGDAPortMemberAction OBJECT-TYPE
        SYNTAX MemberMap
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "member physical port of this group, and each port have its action:
             null(1), static(2), dynamic(3), mroute(4). the port is the logic port
             by implementation specific."
        ::= { mySNIgmpGDAEntry 3 }
        
mySNIgmpGDATrunkMemberAction OBJECT-TYPE
        SYNTAX MemberMap
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "member trunk port of this group, and each trunk port have its action:
             null(1), static(2), dynamic(3), mroute(4). the port is the logic port
             by implementation specific."
        ::= { mySNIgmpGDAEntry 4 }        
    
--mySNIgmpGDAStatus OBJECT-TYPE
--        SYNTAX RowStatus
--        MAX-ACCESS read-create
--        STATUS current
--        DESCRIPTION
--            "the item status"
--        ::= { mySNIgmpGDAEntry 5 }    
        
--mySNIgmpGDAStatus OBJECT-TYPE
--        SYNTAX INTEGER {
--            invalid(1),
--          dynamic(2),
--          static(3)
--      }
--      MAX-ACCESS read-only
--      STATUS current
--      DESCRIPTION
--          "Status of a logic port's Group Destination Address.
--          dynamic (2):
--          while logic port's GDA dynamic configuration in 
--          snoopingIgmpPortTable is enabled some GDA 
--          will add to table with status dynamic.
--          static (3):
--          add by management, you can specify a GDA by
--          hand for a logic port.
--          changes can occur between every status, from invalid
--          to dynamic, static to dynamic, etc. but can't change
--          from invalid to dynamic or static when 
--          snoopingIgmpGDAAddr is not a valid GDA."
--      ::= { mySNIgmpGDAEntry 5 }

mySNIgmpSvglVID OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "the vid of svgl mode"
        ::= { myIgmpSnoopingMIBObjects 9 }
        
mySNIgmpSvglProfile OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "the profile of svgl mode"
        ::= { myIgmpSnoopingMIBObjects 10 }        


mySNIgmpMrLearnTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MySNIgmpMrLearnEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "table of MrLearn."
        ::= { myIgmpSnoopingMIBObjects 11}
    
mySNIgmpMrLearnEntry OBJECT-TYPE
        SYNTAX MySNIgmpMrLearnEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "list of MrLearn table"
        INDEX { mySNIgmpMrLearnVID }         
        ::= { mySNIgmpMrLearnTable 1}
    
MySNIgmpMrLearnEntry ::= 
        SEQUENCE {
        mySNIgmpMrLearnVID VlanId,
        mySNIgmpMrLearnStatus INTEGER
        }

mySNIgmpMrLearnVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "VID of Mr Learn"
        ::= { mySNIgmpMrLearnEntry 1 } 
        
mySNIgmpMrLearnStatus OBJECT-TYPE
        SYNTAX INTEGER{
        	disable(1),
        	pim-dvmrp(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Status of Mr Learn"
        ::= { mySNIgmpMrLearnEntry 2 }          

mySNIgmpPortFilteringTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MySNIgmpPortFilteringEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "table of igmp snooping port filtering."
        ::= { myIgmpSnoopingMIBObjects 12}
    
mySNIgmpPortFilteringEntry OBJECT-TYPE
        SYNTAX MySNIgmpPortFilteringEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "list of igmp filtering table"
        INDEX { mySNPortIndex }         
        ::= { mySNIgmpPortFilteringTable 1}
        
MySNIgmpPortFilteringEntry ::= 
        SEQUENCE {
        mySNPortIndex IfIndex,
        mySNIgmpFilteringProfile Unsigned32,
        mySNIgmpFilteringMaxGroups Unsigned32
        }

mySNPortIndex OBJECT-TYPE
        SYNTAX IfIndex
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION     
            ""
        ::= { mySNIgmpPortFilteringEntry 1}  

mySNIgmpFilteringProfile OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "profile for igmp snooping port filtering"
        ::= { mySNIgmpPortFilteringEntry 2 }     


mySNIgmpFilteringMaxGroups OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The maximum number of IGMP groups that the L2 interface can join,the number can 
            be from 0-4294967294;4294967295(0xFFFFFFFF) means no limit"
        ::= { mySNIgmpPortFilteringEntry 3 }             

mySNIgmpGDAConfigTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MySNIgmpGDAConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "GDA config table"
        ::= { myIgmpSnoopingMIBObjects 13}
    
mySNIgmpGDAConfigEntry OBJECT-TYPE
        SYNTAX MySNIgmpGDAConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION 
            "list of GDA table"
        INDEX { mySNIgmpGDAConfigVID,mySNIgmpGDAConfigAddr }
        ::= { mySNIgmpGDAConfigTable 1 }
    
MySNIgmpGDAConfigEntry ::= 
        SEQUENCE {
        mySNIgmpGDAConfigVID VlanId,
        mySNIgmpGDAConfigAddr IpAddress,
        mySNIgmpGDAConfigIfIndex IfIndex,
        mySNIgmpGDAConfigType INTEGER,
        mySNIgmpGDAConfigStatus INTEGER
        }        

mySNIgmpGDAConfigVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "VID of ipmc stream"
        ::= { mySNIgmpGDAConfigEntry 1 }
        
mySNIgmpGDAConfigAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Group Destination Address for a port."
        ::= { mySNIgmpGDAConfigEntry 2 }
        
mySNIgmpGDAConfigIfIndex OBJECT-TYPE   
	SYNTAX   IfIndex
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "member port of this group"
        ::= { mySNIgmpGDAConfigEntry 3 }
        
mySNIgmpGDAConfigType OBJECT-TYPE   
	SYNTAX   INTEGER{
		null(1),
		static(2),
		dynamic(3),
		mrouter(4)
	}
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            ""
        ::= { mySNIgmpGDAConfigEntry 4 }        
        
mySNIgmpGDAConfigStatus OBJECT-TYPE   
	SYNTAX   INTEGER{
		valid(1),
		invalid(2)
	}
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            ""
        ::= { mySNIgmpGDAConfigEntry 5 }     
        
mySNIgmpQueryResponeTime  OBJECT-TYPE   
	SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Query"
        ::= { myIgmpSnoopingMIBObjects 14}                 
            
	           
        
myIgmpSnoopingMIBConformance OBJECT IDENTIFIER ::= { myIgmpSnoopingMIB 2 }
myIgmpSnoopingMIBCompliances OBJECT IDENTIFIER ::= { myIgmpSnoopingMIBConformance 1 }
myIgmpSnoopingMIBGroups      OBJECT IDENTIFIER ::= { myIgmpSnoopingMIBConformance 2 }


-- compliance statements

myIgmpSnoopingMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for entities which implement
                the My Snooping Igmp MIB"
        MODULE  -- this module
                MANDATORY-GROUPS { myIgmpSnoopingMIBGroup
                 }
        ::= { myIgmpSnoopingMIBCompliances 1 }
                
-- units of conformance

myIgmpSnoopingMIBGroup OBJECT-GROUP
        OBJECTS {
           mySNIgmpWorkingMode,
           mySNIgmpSourcePortCheck,
           mySNIgmpSourceIpCheck,
           mySNIgmpSourceIpCheckDefIp,           
           mySNIgmpSrcIpCheckVID,
           mySNIgmpSrcIpCheckMultiIpAddr,
           mySNIgmpSrcIpCheckSrcIpAddr,
           mySNIgmpSrcIpCheckEntryStatus,    
           mySNIgmpPortRouterVID,        
           mySNIgmpPortIndex,
           mySNIgmpPortRouterState,
           mySNIgmpPortRouterProfile,
           mySNIgmpGDANumber,
           mySNIgmpGDAVID,
           mySNIgmpGDAAddr,
           mySNIgmpGDAPortMemberAction,
           mySNIgmpGDATrunkMemberAction,   
	   mySNIgmpSvglVID,   
	   mySNIgmpSvglProfile,	      
           mySNIgmpMrLearnVID,
           mySNIgmpMrLearnStatus,
           mySNPortIndex,
           mySNIgmpFilteringProfile,
           mySNIgmpFilteringMaxGroups,
           mySNIgmpGDAConfigVID,
           mySNIgmpGDAConfigAddr,
           mySNIgmpGDAConfigIfIndex,
           mySNIgmpGDAConfigType,
           mySNIgmpGDAConfigStatus,
	   mySNIgmpQueryResponeTime           
        }
        STATUS  current
        DESCRIPTION
                "A collection of objects providing snooping Igmp configure ."
        ::= { myIgmpSnoopingMIBGroups 1 }
        
END