-- *****************************************************************
-- MY CLUSTER MIB V1.0
--
-- $Copyright$
-- 
-- *****************************************************************

MY-LLDP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
		FROM SNMPv2-SMI
	MacAddress, TimeStamp, DisplayString, RowStatus
        	FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF
	VlanId
                FROM Q-BRIDGE-MIB
	ConfigStatus, IfIndex
                FROM MY-TC
        EnabledStatus
        	FROM P-BRIDGE-MIB
        myMgmt
                FROM MY-SMI;

myLldpMIB MODULE-IDENTITY
	LAST-UPDATED "200304010000Z"
        ORGANIZATION "$Company$"
        CONTACT-INFO
                " 
                Tel: $Telephone$ 

                E-mail: $E-mail$"
	DESCRIPTION
		"The MIB module for managing the Physical Topology Discovery
	 	Protocol."
    	REVISION  "200304010000Z"
	DESCRIPTION
		""
::= { myMgmt 32 }

lldpMibObjects OBJECT IDENTIFIER ::= { myLldpMIB 1 }

-- MIB groups

lldpConfig OBJECT IDENTIFIER 		::= { lldpMibObjects 1 }
lldpStats OBJECT IDENTIFIER  		::= { lldpMibObjects 2 }
lldpRcvObjects OBJECT IDENTIFIER 	::= { lldpMibObjects 3 }

--
-- ***********************************************************
--
-- L L D P C O N F I G
--
-- ***********************************************************
--

--
-- The Physical Topology Discovery Protocol Configuration Group
--

lldpAdminStatus OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The administratively desired status of the the local LLDP
		 agent."
        DEFVAL { 1 }
::= { lldpConfig 1 }

lldpOperStatus OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"The current operational status of the local LLDP agent."
::= { lldpConfig 2 }

lldpMessageTxInterval OBJECT-TYPE
	SYNTAX Integer32 (5..299)
	UNITS "seconds"
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The interval at which LLDP frames are transmitted on
		 behalf of this LLDP agent."
	DEFVAL { 60 }
::= { lldpConfig 3 }

lldpMessageTxHoldTime OBJECT-TYPE
	SYNTAX Integer32 (10..300)
	UNITS "seconds"
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The time at which the cache entry in lldpRcvTable will be 
		invalid after this timer expired."
	DEFVAL { 180 }
::= { lldpConfig 4 }

lldpDeviceID OBJECT-TYPE
	SYNTAX MacAddress
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"LLDP used device identifier(ID). In specification CPU MAC address
		is used to idendify the device."
::= { lldpConfig 5 }

--
-- LLDPSuppressTable:
-- Disable LLDP activity on individual local ports
--
lldpSuppressTable OBJECT-TYPE
	SYNTAX SEQUENCE OF LldpSuppressEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"A table controlling LLDP frame transmission on individual
		interfaces, ports, or backplanes."
::= { lldpConfig 6 }
	
lldpSuppressEntry OBJECT-TYPE
	SYNTAX LldpSuppressEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"LLDP frame configuration information for a particular
		 port. The port must be contained in the same chassis as the
		 LLDP agent. LLDP frames will not be transmitted or received
		 on the indicated port, even if the port is enabled."
	INDEX {
		lldpSuppressPortIfIndex
	      }
::= { lldpSuppressTable 1 }

LldpSuppressEntry ::= 
SEQUENCE {
	lldpSuppressPortIfIndex IfIndex,
	lldpSuppressPortStatus EnabledStatus
}

lldpSuppressPortIfIndex OBJECT-TYPE
	SYNTAX IfIndex
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"The index value used to identify the port component of this entry. 
		"
::= { lldpSuppressEntry 1 }

lldpSuppressPortStatus OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The status of lldp on port."
	DEFVAL { 1 }
::= { lldpSuppressEntry 2 }
--
-- ***********************************************************
--
-- L L D P S T A T S
--
-- ***********************************************************
--
-- LLDP Stats Group
--
lldpStatsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF LldpStatsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"A table containing LLDP statistics for individual ports.
		Entries are not required to exist in this table while the
		LLDPAdminStatus or LLDPOperStatus objects are equal to
		'disabled(2)'.
		Entries are not required to exist in this table if a
		corresponding entry (with identical index values) exists in
		the LLDPSuppressTable."
::= { lldpStats 1 }

lldpStatsEntry OBJECT-TYPE
	SYNTAX LldpStatsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"LLDP frame statistics for a particular port. The port
		must be contained in the same chassis as the LLDP agent."
	INDEX {
		lldpStatsPortIfIndex
	      }
::= { lldpStatsTable 1 }

LldpStatsEntry ::= SEQUENCE {
	lldpStatsPortIfIndex IfIndex,
	lldpStatsInGoodPkts Counter32,
	lldpStatsInErrors Counter32,
	lldpStatsOutPkts Counter32,
	lldpStatsClear Integer32
}

lldpStatsPortIfIndex OBJECT-TYPE
	SYNTAX IfIndex
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"The index value used to identify the port component of this
		entry."
::= { lldpStatsEntry 1 }

lldpStatsInGoodPkts OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"The number of valid LLDP frames received by this LLDP agent
		on the indicated port, while this LLDP agent is enabled."
::= { lldpStatsEntry 2 }

lldpStatsInErrors OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"The number of invalid LLDP frames received by this LLDP
		agent on the indicated port, while this LLDP agent is
		enabled. A LLDP frame may be invalid for several reasons,
		including:
		- invalid MAC header; length or DA fields
		- invalid LLDP header; version or flags fields
		- invalid LLDP VarBindList ASN.1/BER encoding
		- invalid or missing LLDP VarBindList data elements"
::= { lldpStatsEntry 3 }

lldpStatsOutPkts OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"The number of LLDP frames transmitted by this LLDP agent on
		the indicated port."
::= { lldpStatsEntry 4 }

lldpStatsClear OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Use this object to clear the statistics of this row 
		When setting this object's value to nono 0, such as 1, will 
		clear all the statistics of this row. when access, always
		return 0."
::= {lldpStatsEntry 5 }

--
-- ***********************************************************
--
-- L L D P received objects
--
-- ***********************************************************
lldpRcvTable OBJECT-TYPE
	SYNTAX SEQUENCE OF LldpRcvEntry
    	MAX-ACCESS not-accessible
    	STATUS current
    	DESCRIPTION
            	"The (conceptual) table containing the status of LLDP on
            	the device's interfaces."
    ::= { lldpRcvObjects 1 }

lldpRcvEntry OBJECT-TYPE
    SYNTAX LldpRcvEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the lldpRcvTable,
            containing the information received via LLDP on one
            interface from one device.  Entries appear when
            a LLDP advertisement is received from a neighbor
            device.  Entries disappear when LLDP is disabled
            on the interface, or globally."
    INDEX      { lldpRcvIfIndex, lldpRcvDeviceID }
    ::= { lldpRcvTable 1 }

LldpRcvEntry ::= SEQUENCE {
    lldpRcvIfIndex           IfIndex, 
    lldpRcvDeviceID	     MacAddress,
    lldpRcvMgmtAddress       MacAddress,
    lldpRcvPortIDSubtype     INTEGER,
    lldpRcvPortInfo	     DisplayString,
    lldpRcvClusterMode       INTEGER,
    lldpRcvClusterStatus     EnabledStatus,
    lldpRcvClusterName       DisplayString,
    lldpRcvHostName          DisplayString,
    lldpRcvCommandAddress    MacAddress
}

lldpRcvIfIndex OBJECT-TYPE
    SYNTAX IfIndex
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    	    "The Port Index in system of the LLDP PDU come in."
    ::= { lldpRcvEntry 1 }

lldpRcvDeviceID OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Device ID in received LLDP PDU TLV as defined
    	    in 802.1ab d3."
    ::= { lldpRcvEntry 2 }

lldpRcvMgmtAddress OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Management address in received LLDP PDU TLV as defined
    	    in 802.1ab d3."
    ::= { lldpRcvEntry 3 }

lldpRcvPortIDSubtype OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Always return 6 in this lldp version."
    ::= { lldpRcvEntry 4 }

lldpRcvPortInfo OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..32))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Port description in received LLDP PDU TLV as defined
    	    in 802.1ab d3."
    ::= { lldpRcvEntry 5 }

lldpRcvClusterMode OBJECT-TYPE
    SYNTAX       INTEGER {
                           commandDevice(1),
                           memberDevice(2),
                           none(3)
                          }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Cluster mode in received LLDP PDU vendor TLV."
    ::= { lldpRcvEntry 6 }
    
lldpRcvClusterStatus OBJECT-TYPE
    SYNTAX EnabledStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"Wether the device can be added to a cluster."
    ::= { lldpRcvEntry 7 }

lldpRcvClusterName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..16))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Cluster name in received LLDP PDU vendor TLV."
    ::= { lldpRcvEntry 8 }

lldpRcvHostName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..22))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    	    "Host name in received LLDP PDU vendor TLV."
    ::= { lldpRcvEntry 9 }
    
lldpRcvCommandAddress OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	    "The command switch address in the cluster of this 
    	    device belong to."
    ::= { lldpRcvEntry 10 }

lldpRcvTableClear OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    	   "Use this object to clear the lldpRcvTable.When setting
    	   this object's value to none 0, such as 1, will clear
    	   all receive information in lldpRcvTable. when access,
    	   will always return 0."
    ::= { lldpRcvObjects 2 }
    

    

-- conformance information

lldpMIBConformance OBJECT IDENTIFIER ::= { myLldpMIB 2 }
lldpMIBCompliances OBJECT IDENTIFIER ::= { lldpMIBConformance 1 }
lldpMIBGroups OBJECT IDENTIFIER      ::= { lldpMIBConformance 2 }

-- compliance statements

lldpCompliances MODULE-COMPLIANCE
	STATUS current
	DESCRIPTION
		"The compliance statement for SNMP entities which implement
		the LLDP MIB."
	MODULE -- this module
	MANDATORY-GROUPS { lldpConfigGroup, lldpStatsGroup }
::= { lldpMIBCompliances 1 }

-- MIB groupings
lldpConfigGroup OBJECT-GROUP
	OBJECTS {
		lldpAdminStatus,
		lldpOperStatus,
		lldpMessageTxInterval,
		lldpMessageTxHoldTime,
		lldpSuppressTable
	}
	STATUS current
	DESCRIPTION
		"The collection of objects which are used to configure the
		Link Layer Discovery Protocol implementation behavior.
		This group is mandatory for agents which implement the Link Layer
		Discovery Protocol."
::= { lldpMIBGroups 1 }

lldpStatsGroup OBJECT-GROUP
	OBJECTS {
		lldpStatsInGoodPkts,
		lldpStatsInErrors,
		lldpStatsOutPkts
	}
	STATUS current
	DESCRIPTION
		"The collection of objects which are used to represent Link Layer
		Discovery Protocol statistics.
		This group is mandatory for agents which implement the Link Layer
		Discovery Protocol."
::= { lldpMIBGroups 2 }
END